drivers/usb/host/uhci-hub.c

   1 /*
   2  * Universal Host Controller Interface driver for USB.
   3  *
   4  * Maintainer: Alan Stern <stern@rowland.harvard.edu>
   5  *
   6  * (C) Copyright 1999 Linus Torvalds
   7  * (C) Copyright 1999-2002 Johannes Erdfelt, johannes@erdfelt.com
   8  * (C) Copyright 1999 Randy Dunlap
   9  * (C) Copyright 1999 Georg Acher, acher@in.tum.de
  10  * (C) Copyright 1999 Deti Fliegl, deti@fliegl.de
  11  * (C) Copyright 1999 Thomas Sailer, sailer@ife.ee.ethz.ch
  12  * (C) Copyright 2004 Alan Stern, stern@rowland.harvard.edu
  13  */
  14
  15 static const __u8 root_hub_hub_des[] =
  16 {
  17         0x09,                   /*  __u8  bLength; */
  18         0x29,                   /*  __u8  bDescriptorType; Hub-descriptor */
  19         0x02,                   /*  __u8  bNbrPorts; */
  20         0x0a,                   /* __u16  wHubCharacteristics; */
  21         0x00,                   /*   (per-port OC, no power switching) */
  22         0x01,                   /*  __u8  bPwrOn2pwrGood; 2ms */
  23         0x00,                   /*  __u8  bHubContrCurrent; 0 mA */
  24         0x00,                   /*  __u8  DeviceRemovable; *** 7 Ports max *** */
  25         0xff                    /*  __u8  PortPwrCtrlMask; *** 7 ports max *** */
  26 };
  27
  28 #define UHCI_RH_MAXCHILD        7
  29
  30 /* must write as zeroes */
  31 #define WZ_BITS         (USBPORTSC_RES2 | USBPORTSC_RES3 | USBPORTSC_RES4)
  32
  33 /* status change bits:  nonzero writes will clear */
  34 #define RWC_BITS        (USBPORTSC_OCC | USBPORTSC_PEC | USBPORTSC_CSC)
  35
  36 /* suspend/resume bits: port suspended or port resuming */
  37 #define SUSPEND_BITS    (USBPORTSC_SUSP | USBPORTSC_RD)
  38
  39 /* A port that either is connected or has a changed-bit set will prevent
  40  * us from AUTO_STOPPING.
  41  */
  42 static int any_ports_active(struct uhci_hcd *uhci)
  43 {
  44         int port;
  45
  46         for (port = 0; port < uhci->rh_numports; ++port) {
  47                 if ((uhci_readw(uhci, USBPORTSC1 + port * 2) &
  48                                 (USBPORTSC_CCS | RWC_BITS)) ||
  49                                 test_bit(port, &uhci->port_c_suspend))
  50                         return 1;
  51         }
  52         return 0;
  53 }
  54
  55 static inline int get_hub_status_data(struct uhci_hcd *uhci, char *buf)
  56 {
  57         int port;
  58         int mask = RWC_BITS;
  59
  60         /* Some boards (both VIA and Intel apparently) report bogus
  61          * overcurrent indications, causing massive log spam unless
  62          * we completely ignore them.  This doesn't seem to be a problem
  63          * with the chipset so much as with the way it is connected on
  64          * the motherboard; if the overcurrent input is left to float
  65          * then it may constantly register false positives. */
  66         if (ignore_oc)
  67                 mask &= ~USBPORTSC_OCC;
  68
  69         *buf = 0;
  70         for (port = 0; port < uhci->rh_numports; ++port) {
  71                 if ((uhci_readw(uhci, USBPORTSC1 + port * 2) & mask) ||
  72                                 test_bit(port, &uhci->port_c_suspend))
  73                         *buf |= (1 << (port + 1));
  74         }
  75         return !!*buf;
  76 }
  77
  78 #define OK(x)                   len = (x); break
  79
  80 #define CLR_RH_PORTSTAT(x) \
  81         status = uhci_readw(uhci, port_addr);   \
  82         status &= ~(RWC_BITS|WZ_BITS); \
  83         status &= ~(x); \
  84         status |= RWC_BITS & (x); \
  85         uhci_writew(uhci, status, port_addr)
  86
  87 #define SET_RH_PORTSTAT(x) \
  88         status = uhci_readw(uhci, port_addr);   \
  89         status |= (x); \
  90         status &= ~(RWC_BITS|WZ_BITS); \
  91         uhci_writew(uhci, status, port_addr)
  92
  93 /* UHCI controllers don't automatically stop resume signalling after 20 msec,
  94  * so we have to poll and check timeouts in order to take care of it.
  95  */
  96 static void uhci_finish_suspend(struct uhci_hcd *uhci, int port,
  97                 unsigned long port_addr)
  98 {
  99         int status;
 100         int i;
 101
 102         if (uhci_readw(uhci, port_addr) & SUSPEND_BITS) {
 103                 CLR_RH_PORTSTAT(SUSPEND_BITS);
 104                 if (test_bit(port, &uhci->resuming_ports))
 105                         set_bit(port, &uhci->port_c_suspend);
 106
 107                 /* The controller won't actually turn off the RD bit until
 108                  * it has had a chance to send a low-speed EOP sequence,
 109                  * which is supposed to take 3 bit times (= 2 microseconds).
 110                  * Experiments show that some controllers take longer, so
 111                  * we'll poll for completion. */
 112                 for (i = 0; i < 10; ++i) {
 113                         if (!(uhci_readw(uhci, port_addr) & SUSPEND_BITS))
 114                                 break;
 115                         udelay(1);
 116                 }
 117         }
 118         clear_bit(port, &uhci->resuming_ports);
 119 }
 120
 121 /* Wait for the UHCI controller in HP's iLO2 server management chip.
 122  * It can take up to 250 us to finish a reset and set the CSC bit.
 123  */
 124 static void wait_for_HP(struct uhci_hcd *uhci, unsigned long port_addr)
 125 {
 126         int i;
 127
 128         for (i = 10; i < 250; i += 10) {
 129                 if (uhci_readw(uhci, port_addr) & USBPORTSC_CSC)
 130                         return;
 131                 udelay(10);
 132         }
 133         /* Log a warning? */
 134 }
 135
 136 static void uhci_check_ports(struct uhci_hcd *uhci)
 137 {
 138         unsigned int port;
 139         unsigned long port_addr;
 140         int status;
 141
 142         for (port = 0; port < uhci->rh_numports; ++port) {
 143                 port_addr = USBPORTSC1 + 2 * port;
 144                 status = uhci_readw(uhci, port_addr);
 145                 if (unlikely(status & USBPORTSC_PR)) {
 146                         if (time_after_eq(jiffies, uhci->ports_timeout)) {
 147                                 CLR_RH_PORTSTAT(USBPORTSC_PR);
 148                                 udelay(10);
 149
 150                                 /* HP's server management chip requires
 151                                  * a longer delay. */
 152                                 if (uhci->wait_for_hp)
 153                                         wait_for_HP(uhci, port_addr);
 154
 155                                 /* If the port was enabled before, turning
 156                                  * reset on caused a port enable change.
 157                                  * Turning reset off causes a port connect
 158                                  * status change.  Clear these changes. */
 159                                 CLR_RH_PORTSTAT(USBPORTSC_CSC | USBPORTSC_PEC);
 160                                 SET_RH_PORTSTAT(USBPORTSC_PE);
 161                         }
 162                 }
 163                 if (unlikely(status & USBPORTSC_RD)) {
 164                         if (!test_bit(port, &uhci->resuming_ports)) {
 165
 166                                 /* Port received a wakeup request */
 167                                 set_bit(port, &uhci->resuming_ports);
 168                                 uhci->ports_timeout = jiffies +
 169                                                 msecs_to_jiffies(25);
 170
 171                                 /* Make sure we see the port again
 172                                  * after the resuming period is over. */
 173                                 mod_timer(&uhci_to_hcd(uhci)->rh_timer,
 174                                                 uhci->ports_timeout);
 175                         } else if (time_after_eq(jiffies,
 176                                                 uhci->ports_timeout)) {
 177                                 uhci_finish_suspend(uhci, port, port_addr);
 178                         }
 179                 }
 180         }
 181 }
 182
 183 static int uhci_hub_status_data(struct usb_hcd *hcd, char *buf)
 184 {
 185         struct uhci_hcd *uhci = hcd_to_uhci(hcd);
 186         unsigned long flags;
 187         int status = 0;
 188
 189         spin_lock_irqsave(&uhci->lock, flags);
 190
 191         uhci_scan_schedule(uhci);
 192         if (!HCD_HW_ACCESSIBLE(hcd) || uhci->dead)
 193                 goto done;
 194         uhci_check_ports(uhci);
 195
 196         status = get_hub_status_data(uhci, buf);
 197
 198         switch (uhci->rh_state) {
 199             case UHCI_RH_SUSPENDING:
 200             case UHCI_RH_SUSPENDED:
 201                 /* if port change, ask to be resumed */
 202                 if (status || uhci->resuming_ports)
 203                         usb_hcd_resume_root_hub(hcd);
 204                 break;
 205
 206             case UHCI_RH_AUTO_STOPPED:
 207                 /* if port change, auto start */
 208                 if (status)
 209                         wakeup_rh(uhci);
 210                 break;
 211
 212             case UHCI_RH_RUNNING:
 213                 /* are any devices attached? */
 214                 if (!any_ports_active(uhci)) {
 215                         uhci->rh_state = UHCI_RH_RUNNING_NODEVS;
 216                         uhci->auto_stop_time = jiffies + HZ;
 217                 }
 218                 break;
 219
 220             case UHCI_RH_RUNNING_NODEVS:
 221                 /* auto-stop if nothing connected for 1 second */
 222                 if (any_ports_active(uhci))
 223                         uhci->rh_state = UHCI_RH_RUNNING;
 224                 else if (time_after_eq(jiffies, uhci->auto_stop_time))
 225                         suspend_rh(uhci, UHCI_RH_AUTO_STOPPED);
 226                 break;
 227
 228             default:
 229                 break;
 230         }
 231
 232 done:
 233         spin_unlock_irqrestore(&uhci->lock, flags);
 234         return status;
 235 }
 236
 237 /* size of returned buffer is part of USB spec */
 238 static int uhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 239                         u16 wIndex, char *buf, u16 wLength)
 240 {
 241         struct uhci_hcd *uhci = hcd_to_uhci(hcd);
 242         int status, lstatus, retval = 0, len = 0;
 243         unsigned int port = wIndex - 1;
 244         unsigned long port_addr = USBPORTSC1 + 2 * port;
 245         u16 wPortChange, wPortStatus;
 246         unsigned long flags;
 247
 248         if (!HCD_HW_ACCESSIBLE(hcd) || uhci->dead)
 249                 return -ETIMEDOUT;
 250
 251         spin_lock_irqsave(&uhci->lock, flags);
 252         switch (typeReq) {
 253
 254         case GetHubStatus:
 255                 *(__le32 *)buf = cpu_to_le32(0);
 256                 OK(4);          /* hub power */
 257         case GetPortStatus:
 258                 if (port >= uhci->rh_numports)
 259                         goto err;
 260
 261                 uhci_check_ports(uhci);
 262                 status = uhci_readw(uhci, port_addr);
 263
 264                 /* Intel controllers report the OverCurrent bit active on.
 265                  * VIA controllers report it active off, so we'll adjust the
 266                  * bit value.  (It's not standardized in the UHCI spec.)
 267                  */
 268                 if (uhci->oc_low)
 269                         status ^= USBPORTSC_OC;
 270
 271                 /* UHCI doesn't support C_RESET (always false) */
 272                 wPortChange = lstatus = 0;
 273                 if (status & USBPORTSC_CSC)
 274                         wPortChange |= USB_PORT_STAT_C_CONNECTION;
 275                 if (status & USBPORTSC_PEC)
 276                         wPortChange |= USB_PORT_STAT_C_ENABLE;
 277                 if ((status & USBPORTSC_OCC) && !ignore_oc)
 278                         wPortChange |= USB_PORT_STAT_C_OVERCURRENT;
 279
 280                 if (test_bit(port, &uhci->port_c_suspend)) {
 281                         wPortChange |= USB_PORT_STAT_C_SUSPEND;
 282                         lstatus |= 1;
 283                 }
 284                 if (test_bit(port, &uhci->resuming_ports))
 285                         lstatus |= 4;
 286
 287                 /* UHCI has no power switching (always on) */
 288                 wPortStatus = USB_PORT_STAT_POWER;
 289                 if (status & USBPORTSC_CCS)
 290                         wPortStatus |= USB_PORT_STAT_CONNECTION;
 291                 if (status & USBPORTSC_PE) {
 292                         wPortStatus |= USB_PORT_STAT_ENABLE;
 293                         if (status & SUSPEND_BITS)
 294                                 wPortStatus |= USB_PORT_STAT_SUSPEND;
 295                 }
 296                 if (status & USBPORTSC_OC)
 297                         wPortStatus |= USB_PORT_STAT_OVERCURRENT;
 298                 if (status & USBPORTSC_PR)
 299                         wPortStatus |= USB_PORT_STAT_RESET;
 300                 if (status & USBPORTSC_LSDA)
 301                         wPortStatus |= USB_PORT_STAT_LOW_SPEED;
 302
 303                 if (wPortChange)
 304                         dev_dbg(uhci_dev(uhci), "port %d portsc %04x,%02x\n",
 305                                         wIndex, status, lstatus);
 306
 307                 *(__le16 *)buf = cpu_to_le16(wPortStatus);
 308                 *(__le16 *)(buf + 2) = cpu_to_le16(wPortChange);
 309                 OK(4);
 310         case SetHubFeature:             /* We don't implement these */
 311         case ClearHubFeature:
 312                 switch (wValue) {
 313                 case C_HUB_OVER_CURRENT:
 314                 case C_HUB_LOCAL_POWER:
 315                         OK(0);
 316                 default:
 317                         goto err;
 318                 }
 319                 break;
 320         case SetPortFeature:
 321                 if (port >= uhci->rh_numports)
 322                         goto err;
 323
 324                 switch (wValue) {
 325                 case USB_PORT_FEAT_SUSPEND:
 326                         SET_RH_PORTSTAT(USBPORTSC_SUSP);
 327                         OK(0);
 328                 case USB_PORT_FEAT_RESET:
 329                         SET_RH_PORTSTAT(USBPORTSC_PR);
 330
 331                         /* Reset terminates Resume signalling */
 332                         uhci_finish_suspend(uhci, port, port_addr);
 333
 334                         /* USB v2.0 7.1.7.5 */
 335                         uhci->ports_timeout = jiffies + msecs_to_jiffies(50);
 336                         OK(0);
 337                 case USB_PORT_FEAT_POWER:
 338                         /* UHCI has no power switching */
 339                         OK(0);
 340                 default:
 341                         goto err;
 342                 }
 343                 break;
 344         case ClearPortFeature:
 345                 if (port >= uhci->rh_numports)
 346                         goto err;
 347
 348                 switch (wValue) {
 349                 case USB_PORT_FEAT_ENABLE:
 350                         CLR_RH_PORTSTAT(USBPORTSC_PE);
 351
 352                         /* Disable terminates Resume signalling */
 353                         uhci_finish_suspend(uhci, port, port_addr);
 354                         OK(0);
 355                 case USB_PORT_FEAT_C_ENABLE:
 356                         CLR_RH_PORTSTAT(USBPORTSC_PEC);
 357                         OK(0);
 358                 case USB_PORT_FEAT_SUSPEND:
 359                         if (!(uhci_readw(uhci, port_addr) & USBPORTSC_SUSP)) {
 360
 361                                 /* Make certain the port isn't suspended */
 362                                 uhci_finish_suspend(uhci, port, port_addr);
 363                         } else if (!test_and_set_bit(port,
 364                                                 &uhci->resuming_ports)) {
 365                                 SET_RH_PORTSTAT(USBPORTSC_RD);
 366
 367                                 /* The controller won't allow RD to be set
 368                                  * if the port is disabled.  When this happens
 369                                  * just skip the Resume signalling.
 370                                  */
 371                                 if (!(uhci_readw(uhci, port_addr) &
 372                                                 USBPORTSC_RD))
 373                                         uhci_finish_suspend(uhci, port,
 374                                                         port_addr);
 375                                 else
 376                                         /* USB v2.0 7.1.7.7 */
 377                                         uhci->ports_timeout = jiffies +
 378                                                 msecs_to_jiffies(20);
 379                         }
 380                         OK(0);
 381                 case USB_PORT_FEAT_C_SUSPEND:
 382                         clear_bit(port, &uhci->port_c_suspend);
 383                         OK(0);
 384                 case USB_PORT_FEAT_POWER:
 385                         /* UHCI has no power switching */
 386                         goto err;
 387                 case USB_PORT_FEAT_C_CONNECTION:
 388                         CLR_RH_PORTSTAT(USBPORTSC_CSC);
 389                         OK(0);
 390                 case USB_PORT_FEAT_C_OVER_CURRENT:
 391                         CLR_RH_PORTSTAT(USBPORTSC_OCC);
 392                         OK(0);
 393                 case USB_PORT_FEAT_C_RESET:
 394                         /* this driver won't report these */
 395                         OK(0);
 396                 default:
 397                         goto err;
 398                 }
 399                 break;
 400         case GetHubDescriptor:
 401                 len = min_t(unsigned int, sizeof(root_hub_hub_des), wLength);
 402                 memcpy(buf, root_hub_hub_des, len);
 403                 if (len > 2)
 404                         buf[2] = uhci->rh_numports;
 405                 OK(len);
 406         default:
 407 err:
 408                 retval = -EPIPE;
 409         }
 410         spin_unlock_irqrestore(&uhci->lock, flags);
 411
 412         return retval;
 413 }