xhci: correct burst count field for isoc transfers on 1.0 xhci hosts
[pandora-kernel.git] / drivers / usb / host / ohci-ppc-of.c
1 /*
2  * OHCI HCD (Host Controller Driver) for USB.
3  *
4  * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
5  * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
6  * (C) Copyright 2002 Hewlett-Packard Company
7  * (C) Copyright 2006 Sylvain Munaut <tnt@246tNt.com>
8  *
9  * Bus glue for OHCI HC on the of_platform bus
10  *
11  * Modified for of_platform bus from ohci-sa1111.c
12  *
13  * This file is licenced under the GPL.
14  */
15
16 #include <linux/signal.h>
17 #include <linux/of_platform.h>
18
19 #include <asm/prom.h>
20
21
22 static int __devinit
23 ohci_ppc_of_start(struct usb_hcd *hcd)
24 {
25         struct ohci_hcd *ohci = hcd_to_ohci(hcd);
26         int             ret;
27
28         if ((ret = ohci_init(ohci)) < 0)
29                 return ret;
30
31         if ((ret = ohci_run(ohci)) < 0) {
32                 err("can't start %s", ohci_to_hcd(ohci)->self.bus_name);
33                 ohci_stop(hcd);
34                 return ret;
35         }
36
37         return 0;
38 }
39
40 static const struct hc_driver ohci_ppc_of_hc_driver = {
41         .description =          hcd_name,
42         .product_desc =         "OF OHCI",
43         .hcd_priv_size =        sizeof(struct ohci_hcd),
44
45         /*
46          * generic hardware linkage
47          */
48         .irq =                  ohci_irq,
49         .flags =                HCD_USB11 | HCD_MEMORY,
50
51         /*
52          * basic lifecycle operations
53          */
54         .start =                ohci_ppc_of_start,
55         .stop =                 ohci_stop,
56         .shutdown =             ohci_shutdown,
57
58         /*
59          * managing i/o requests and associated device resources
60          */
61         .urb_enqueue =          ohci_urb_enqueue,
62         .urb_dequeue =          ohci_urb_dequeue,
63         .endpoint_disable =     ohci_endpoint_disable,
64
65         /*
66          * scheduling support
67          */
68         .get_frame_number =     ohci_get_frame,
69
70         /*
71          * root hub support
72          */
73         .hub_status_data =      ohci_hub_status_data,
74         .hub_control =          ohci_hub_control,
75 #ifdef  CONFIG_PM
76         .bus_suspend =          ohci_bus_suspend,
77         .bus_resume =           ohci_bus_resume,
78 #endif
79         .start_port_reset =     ohci_start_port_reset,
80 };
81
82
83 static int __devinit ohci_hcd_ppc_of_probe(struct platform_device *op)
84 {
85         struct device_node *dn = op->dev.of_node;
86         struct usb_hcd *hcd;
87         struct ohci_hcd *ohci;
88         struct resource res;
89         int irq;
90
91         int rv;
92         int is_bigendian;
93         struct device_node *np;
94
95         if (usb_disabled())
96                 return -ENODEV;
97
98         is_bigendian =
99                 of_device_is_compatible(dn, "ohci-bigendian") ||
100                 of_device_is_compatible(dn, "ohci-be");
101
102         dev_dbg(&op->dev, "initializing PPC-OF USB Controller\n");
103
104         rv = of_address_to_resource(dn, 0, &res);
105         if (rv)
106                 return rv;
107
108         hcd = usb_create_hcd(&ohci_ppc_of_hc_driver, &op->dev, "PPC-OF USB");
109         if (!hcd)
110                 return -ENOMEM;
111
112         hcd->rsrc_start = res.start;
113         hcd->rsrc_len = resource_size(&res);
114
115         if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
116                 printk(KERN_ERR "%s: request_mem_region failed\n", __FILE__);
117                 rv = -EBUSY;
118                 goto err_rmr;
119         }
120
121         irq = irq_of_parse_and_map(dn, 0);
122         if (irq == NO_IRQ) {
123                 printk(KERN_ERR "%s: irq_of_parse_and_map failed\n", __FILE__);
124                 rv = -EBUSY;
125                 goto err_irq;
126         }
127
128         hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
129         if (!hcd->regs) {
130                 printk(KERN_ERR "%s: ioremap failed\n", __FILE__);
131                 rv = -ENOMEM;
132                 goto err_ioremap;
133         }
134
135         ohci = hcd_to_ohci(hcd);
136         if (is_bigendian) {
137                 ohci->flags |= OHCI_QUIRK_BE_MMIO | OHCI_QUIRK_BE_DESC;
138                 if (of_device_is_compatible(dn, "fsl,mpc5200-ohci"))
139                         ohci->flags |= OHCI_QUIRK_FRAME_NO;
140                 if (of_device_is_compatible(dn, "mpc5200-ohci"))
141                         ohci->flags |= OHCI_QUIRK_FRAME_NO;
142         }
143
144         ohci_hcd_init(ohci);
145
146         rv = usb_add_hcd(hcd, irq, 0);
147         if (rv == 0)
148                 return 0;
149
150         /* by now, 440epx is known to show usb_23 erratum */
151         np = of_find_compatible_node(NULL, NULL, "ibm,usb-ehci-440epx");
152
153         /* Work around - At this point ohci_run has executed, the
154         * controller is running, everything, the root ports, etc., is
155         * set up.  If the ehci driver is loaded, put the ohci core in
156         * the suspended state.  The ehci driver will bring it out of
157         * suspended state when / if a non-high speed USB device is
158         * attached to the USB Host port.  If the ehci driver is not
159         * loaded, do nothing. request_mem_region is used to test if
160         * the ehci driver is loaded.
161         */
162         if (np !=  NULL) {
163                 if (!of_address_to_resource(np, 0, &res)) {
164                         if (!request_mem_region(res.start, 0x4, hcd_name)) {
165                                 writel_be((readl_be(&ohci->regs->control) |
166                                         OHCI_USB_SUSPEND), &ohci->regs->control);
167                                         (void) readl_be(&ohci->regs->control);
168                         } else
169                                 release_mem_region(res.start, 0x4);
170                 } else
171                         pr_debug("%s: cannot get ehci offset from fdt\n", __FILE__);
172         }
173
174         iounmap(hcd->regs);
175 err_ioremap:
176         irq_dispose_mapping(irq);
177 err_irq:
178         release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
179 err_rmr:
180         usb_put_hcd(hcd);
181
182         return rv;
183 }
184
185 static int ohci_hcd_ppc_of_remove(struct platform_device *op)
186 {
187         struct usb_hcd *hcd = dev_get_drvdata(&op->dev);
188         dev_set_drvdata(&op->dev, NULL);
189
190         dev_dbg(&op->dev, "stopping PPC-OF USB Controller\n");
191
192         usb_remove_hcd(hcd);
193
194         iounmap(hcd->regs);
195         irq_dispose_mapping(hcd->irq);
196         release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
197
198         usb_put_hcd(hcd);
199
200         return 0;
201 }
202
203 static void ohci_hcd_ppc_of_shutdown(struct platform_device *op)
204 {
205         struct usb_hcd *hcd = dev_get_drvdata(&op->dev);
206
207         if (hcd->driver->shutdown)
208                 hcd->driver->shutdown(hcd);
209 }
210
211
212 static const struct of_device_id ohci_hcd_ppc_of_match[] = {
213 #ifdef CONFIG_USB_OHCI_HCD_PPC_OF_BE
214         {
215                 .name = "usb",
216                 .compatible = "ohci-bigendian",
217         },
218         {
219                 .name = "usb",
220                 .compatible = "ohci-be",
221         },
222 #endif
223 #ifdef CONFIG_USB_OHCI_HCD_PPC_OF_LE
224         {
225                 .name = "usb",
226                 .compatible = "ohci-littledian",
227         },
228         {
229                 .name = "usb",
230                 .compatible = "ohci-le",
231         },
232 #endif
233         {},
234 };
235 MODULE_DEVICE_TABLE(of, ohci_hcd_ppc_of_match);
236
237 #if     !defined(CONFIG_USB_OHCI_HCD_PPC_OF_BE) && \
238         !defined(CONFIG_USB_OHCI_HCD_PPC_OF_LE)
239 #error "No endianess selected for ppc-of-ohci"
240 #endif
241
242
243 static struct platform_driver ohci_hcd_ppc_of_driver = {
244         .probe          = ohci_hcd_ppc_of_probe,
245         .remove         = ohci_hcd_ppc_of_remove,
246         .shutdown       = ohci_hcd_ppc_of_shutdown,
247         .driver = {
248                 .name = "ppc-of-ohci",
249                 .owner = THIS_MODULE,
250                 .of_match_table = ohci_hcd_ppc_of_match,
251         },
252 };
253