drivers/usb/gadget/printer.c

   1 /*
   2  * printer.c -- Printer gadget driver
   3  *
   4  * Copyright (C) 2003-2005 David Brownell
   5  * Copyright (C) 2006 Craig W. Nadler
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License as published by
   9  * the Free Software Foundation; either version 2 of the License, or
  10  * (at your option) any later version.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software
  19  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  20  */
  21
  22 #include <linux/module.h>
  23 #include <linux/kernel.h>
  24 #include <linux/delay.h>
  25 #include <linux/ioport.h>
  26 #include <linux/sched.h>
  27 #include <linux/slab.h>
  28 #include <linux/mutex.h>
  29 #include <linux/errno.h>
  30 #include <linux/init.h>
  31 #include <linux/timer.h>
  32 #include <linux/list.h>
  33 #include <linux/interrupt.h>
  34 #include <linux/utsname.h>
  35 #include <linux/device.h>
  36 #include <linux/moduleparam.h>
  37 #include <linux/fs.h>
  38 #include <linux/poll.h>
  39 #include <linux/types.h>
  40 #include <linux/ctype.h>
  41 #include <linux/cdev.h>
  42
  43 #include <asm/byteorder.h>
  44 #include <linux/io.h>
  45 #include <linux/irq.h>
  46 #include <asm/system.h>
  47 #include <linux/uaccess.h>
  48 #include <asm/unaligned.h>
  49
  50 #include <linux/usb/ch9.h>
  51 #include <linux/usb/gadget.h>
  52 #include <linux/usb/g_printer.h>
  53
  54 #include "gadget_chips.h"
  55
  56
  57 /*
  58  * Kbuild is not very cooperative with respect to linking separately
  59  * compiled library objects into one module.  So for now we won't use
  60  * separate compilation ... ensuring init/exit sections work to shrink
  61  * the runtime footprint, and giving us at least some parts of what
  62  * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
  63  */
  64 #include "usbstring.c"
  65 #include "config.c"
  66 #include "epautoconf.c"
  67
  68 /*-------------------------------------------------------------------------*/
  69
  70 #define DRIVER_DESC             "Printer Gadget"
  71 #define DRIVER_VERSION          "2007 OCT 06"
  72
  73 static DEFINE_MUTEX(printer_mutex);
  74 static const char shortname [] = "printer";
  75 static const char driver_desc [] = DRIVER_DESC;
  76
  77 static dev_t g_printer_devno;
  78
  79 static struct class *usb_gadget_class;
  80
  81 /*-------------------------------------------------------------------------*/
  82
  83 struct printer_dev {
  84         spinlock_t              lock;           /* lock this structure */
  85         /* lock buffer lists during read/write calls */
  86         struct mutex            lock_printer_io;
  87         struct usb_gadget       *gadget;
  88         struct usb_request      *req;           /* for control responses */
  89         u8                      config;
  90         s8                      interface;
  91         struct usb_ep           *in_ep, *out_ep;
  92         const struct usb_endpoint_descriptor
  93                                 *in, *out;
  94         struct list_head        rx_reqs;        /* List of free RX structs */
  95         struct list_head        rx_reqs_active; /* List of Active RX xfers */
  96         struct list_head        rx_buffers;     /* List of completed xfers */
  97         /* wait until there is data to be read. */
  98         wait_queue_head_t       rx_wait;
  99         struct list_head        tx_reqs;        /* List of free TX structs */
 100         struct list_head        tx_reqs_active; /* List of Active TX xfers */
 101         /* Wait until there are write buffers available to use. */
 102         wait_queue_head_t       tx_wait;
 103         /* Wait until all write buffers have been sent. */
 104         wait_queue_head_t       tx_flush_wait;
 105         struct usb_request      *current_rx_req;
 106         size_t                  current_rx_bytes;
 107         u8                      *current_rx_buf;
 108         u8                      printer_status;
 109         u8                      reset_printer;
 110         struct cdev             printer_cdev;
 111         struct device           *pdev;
 112         u8                      printer_cdev_open;
 113         wait_queue_head_t       wait;
 114 };
 115
 116 static struct printer_dev usb_printer_gadget;
 117
 118 /*-------------------------------------------------------------------------*/
 119
 120 /* DO NOT REUSE THESE IDs with a protocol-incompatible driver!!  Ever!!
 121  * Instead:  allocate your own, using normal USB-IF procedures.
 122  */
 123
 124 /* Thanks to NetChip Technologies for donating this product ID.
 125  */
 126 #define PRINTER_VENDOR_NUM      0x0525          /* NetChip */
 127 #define PRINTER_PRODUCT_NUM     0xa4a8          /* Linux-USB Printer Gadget */
 128
 129 /* Some systems will want different product identifers published in the
 130  * device descriptor, either numbers or strings or both.  These string
 131  * parameters are in UTF-8 (superset of ASCII's 7 bit characters).
 132  */
 133
 134 static ushort __initdata idVendor;
 135 module_param(idVendor, ushort, S_IRUGO);
 136 MODULE_PARM_DESC(idVendor, "USB Vendor ID");
 137
 138 static ushort __initdata idProduct;
 139 module_param(idProduct, ushort, S_IRUGO);
 140 MODULE_PARM_DESC(idProduct, "USB Product ID");
 141
 142 static ushort __initdata bcdDevice;
 143 module_param(bcdDevice, ushort, S_IRUGO);
 144 MODULE_PARM_DESC(bcdDevice, "USB Device version (BCD)");
 145
 146 static char *__initdata iManufacturer;
 147 module_param(iManufacturer, charp, S_IRUGO);
 148 MODULE_PARM_DESC(iManufacturer, "USB Manufacturer string");
 149
 150 static char *__initdata iProduct;
 151 module_param(iProduct, charp, S_IRUGO);
 152 MODULE_PARM_DESC(iProduct, "USB Product string");
 153
 154 static char *__initdata iSerialNum;
 155 module_param(iSerialNum, charp, S_IRUGO);
 156 MODULE_PARM_DESC(iSerialNum, "1");
 157
 158 static char *__initdata iPNPstring;
 159 module_param(iPNPstring, charp, S_IRUGO);
 160 MODULE_PARM_DESC(iPNPstring, "MFG:linux;MDL:g_printer;CLS:PRINTER;SN:1;");
 161
 162 /* Number of requests to allocate per endpoint, not used for ep0. */
 163 static unsigned qlen = 10;
 164 module_param(qlen, uint, S_IRUGO|S_IWUSR);
 165
 166 #define QLEN    qlen
 167
 168 #ifdef CONFIG_USB_GADGET_DUALSPEED
 169 #define DEVSPEED        USB_SPEED_HIGH
 170 #else   /* full speed (low speed doesn't do bulk) */
 171 #define DEVSPEED        USB_SPEED_FULL
 172 #endif
 173
 174 /*-------------------------------------------------------------------------*/
 175
 176 #define xprintk(d, level, fmt, args...) \
 177         printk(level "%s: " fmt, DRIVER_DESC, ## args)
 178
 179 #ifdef DEBUG
 180 #define DBG(dev, fmt, args...) \
 181         xprintk(dev, KERN_DEBUG, fmt, ## args)
 182 #else
 183 #define DBG(dev, fmt, args...) \
 184         do { } while (0)
 185 #endif /* DEBUG */
 186
 187 #ifdef VERBOSE
 188 #define VDBG(dev, fmt, args...) \
 189         xprintk(dev, KERN_DEBUG, fmt, ## args)
 190 #else
 191 #define VDBG(dev, fmt, args...) \
 192         do { } while (0)
 193 #endif /* VERBOSE */
 194
 195 #define ERROR(dev, fmt, args...) \
 196         xprintk(dev, KERN_ERR, fmt, ## args)
 197 #define WARNING(dev, fmt, args...) \
 198         xprintk(dev, KERN_WARNING, fmt, ## args)
 199 #define INFO(dev, fmt, args...) \
 200         xprintk(dev, KERN_INFO, fmt, ## args)
 201
 202 /*-------------------------------------------------------------------------*/
 203
 204 /* USB DRIVER HOOKUP (to the hardware driver, below us), mostly
 205  * ep0 implementation:  descriptors, config management, setup().
 206  * also optional class-specific notification interrupt transfer.
 207  */
 208
 209 /*
 210  * DESCRIPTORS ... most are static, but strings and (full) configuration
 211  * descriptors are built on demand.
 212  */
 213
 214 #define STRING_MANUFACTURER             1
 215 #define STRING_PRODUCT                  2
 216 #define STRING_SERIALNUM                3
 217
 218 /* holds our biggest descriptor */
 219 #define USB_DESC_BUFSIZE                256
 220 #define USB_BUFSIZE                     8192
 221
 222 /* This device advertises one configuration. */
 223 #define DEV_CONFIG_VALUE                1
 224 #define PRINTER_INTERFACE               0
 225
 226 static struct usb_device_descriptor device_desc = {
 227         .bLength =              sizeof device_desc,
 228         .bDescriptorType =      USB_DT_DEVICE,
 229         .bcdUSB =               cpu_to_le16(0x0200),
 230         .bDeviceClass =         USB_CLASS_PER_INTERFACE,
 231         .bDeviceSubClass =      0,
 232         .bDeviceProtocol =      0,
 233         .idVendor =             cpu_to_le16(PRINTER_VENDOR_NUM),
 234         .idProduct =            cpu_to_le16(PRINTER_PRODUCT_NUM),
 235         .iManufacturer =        STRING_MANUFACTURER,
 236         .iProduct =             STRING_PRODUCT,
 237         .iSerialNumber =        STRING_SERIALNUM,
 238         .bNumConfigurations =   1
 239 };
 240
 241 static struct usb_otg_descriptor otg_desc = {
 242         .bLength =              sizeof otg_desc,
 243         .bDescriptorType =      USB_DT_OTG,
 244         .bmAttributes =         USB_OTG_SRP
 245 };
 246
 247 static struct usb_config_descriptor config_desc = {
 248         .bLength =              sizeof config_desc,
 249         .bDescriptorType =      USB_DT_CONFIG,
 250
 251         /* compute wTotalLength on the fly */
 252         .bNumInterfaces =       1,
 253         .bConfigurationValue =  DEV_CONFIG_VALUE,
 254         .iConfiguration =       0,
 255         .bmAttributes =         USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
 256         .bMaxPower =            CONFIG_USB_GADGET_VBUS_DRAW / 2,
 257 };
 258
 259 static struct usb_interface_descriptor intf_desc = {
 260         .bLength =              sizeof intf_desc,
 261         .bDescriptorType =      USB_DT_INTERFACE,
 262         .bInterfaceNumber =     PRINTER_INTERFACE,
 263         .bNumEndpoints =        2,
 264         .bInterfaceClass =      USB_CLASS_PRINTER,
 265         .bInterfaceSubClass =   1,      /* Printer Sub-Class */
 266         .bInterfaceProtocol =   2,      /* Bi-Directional */
 267         .iInterface =           0
 268 };
 269
 270 static struct usb_endpoint_descriptor fs_ep_in_desc = {
 271         .bLength =              USB_DT_ENDPOINT_SIZE,
 272         .bDescriptorType =      USB_DT_ENDPOINT,
 273         .bEndpointAddress =     USB_DIR_IN,
 274         .bmAttributes =         USB_ENDPOINT_XFER_BULK
 275 };
 276
 277 static struct usb_endpoint_descriptor fs_ep_out_desc = {
 278         .bLength =              USB_DT_ENDPOINT_SIZE,
 279         .bDescriptorType =      USB_DT_ENDPOINT,
 280         .bEndpointAddress =     USB_DIR_OUT,
 281         .bmAttributes =         USB_ENDPOINT_XFER_BULK
 282 };
 283
 284 static const struct usb_descriptor_header *fs_printer_function [11] = {
 285         (struct usb_descriptor_header *) &otg_desc,
 286         (struct usb_descriptor_header *) &intf_desc,
 287         (struct usb_descriptor_header *) &fs_ep_in_desc,
 288         (struct usb_descriptor_header *) &fs_ep_out_desc,
 289         NULL
 290 };
 291
 292 #ifdef  CONFIG_USB_GADGET_DUALSPEED
 293
 294 /*
 295  * usb 2.0 devices need to expose both high speed and full speed
 296  * descriptors, unless they only run at full speed.
 297  */
 298
 299 static struct usb_endpoint_descriptor hs_ep_in_desc = {
 300         .bLength =              USB_DT_ENDPOINT_SIZE,
 301         .bDescriptorType =      USB_DT_ENDPOINT,
 302         .bmAttributes =         USB_ENDPOINT_XFER_BULK,
 303         .wMaxPacketSize =       cpu_to_le16(512)
 304 };
 305
 306 static struct usb_endpoint_descriptor hs_ep_out_desc = {
 307         .bLength =              USB_DT_ENDPOINT_SIZE,
 308         .bDescriptorType =      USB_DT_ENDPOINT,
 309         .bmAttributes =         USB_ENDPOINT_XFER_BULK,
 310         .wMaxPacketSize =       cpu_to_le16(512)
 311 };
 312
 313 static struct usb_qualifier_descriptor dev_qualifier = {
 314         .bLength =              sizeof dev_qualifier,
 315         .bDescriptorType =      USB_DT_DEVICE_QUALIFIER,
 316         .bcdUSB =               cpu_to_le16(0x0200),
 317         .bDeviceClass =         USB_CLASS_PRINTER,
 318         .bNumConfigurations =   1
 319 };
 320
 321 static const struct usb_descriptor_header *hs_printer_function [11] = {
 322         (struct usb_descriptor_header *) &otg_desc,
 323         (struct usb_descriptor_header *) &intf_desc,
 324         (struct usb_descriptor_header *) &hs_ep_in_desc,
 325         (struct usb_descriptor_header *) &hs_ep_out_desc,
 326         NULL
 327 };
 328
 329 /* maxpacket and other transfer characteristics vary by speed. */
 330 #define ep_desc(g, hs, fs) (((g)->speed == USB_SPEED_HIGH)?(hs):(fs))
 331
 332 #else
 333
 334 /* if there's no high speed support, maxpacket doesn't change. */
 335 #define ep_desc(g, hs, fs) (((void)(g)), (fs))
 336
 337 #endif  /* !CONFIG_USB_GADGET_DUALSPEED */
 338
 339 /*-------------------------------------------------------------------------*/
 340
 341 /* descriptors that are built on-demand */
 342
 343 static char                             manufacturer [50];
 344 static char                             product_desc [40] = DRIVER_DESC;
 345 static char                             serial_num [40] = "1";
 346 static char                             pnp_string [1024] =
 347         "XXMFG:linux;MDL:g_printer;CLS:PRINTER;SN:1;";
 348
 349 /* static strings, in UTF-8 */
 350 static struct usb_string                strings [] = {
 351         { STRING_MANUFACTURER,  manufacturer, },
 352         { STRING_PRODUCT,       product_desc, },
 353         { STRING_SERIALNUM,     serial_num, },
 354         {  }            /* end of list */
 355 };
 356
 357 static struct usb_gadget_strings        stringtab = {
 358         .language       = 0x0409,       /* en-us */
 359         .strings        = strings,
 360 };
 361
 362 /*-------------------------------------------------------------------------*/
 363
 364 static struct usb_request *
 365 printer_req_alloc(struct usb_ep *ep, unsigned len, gfp_t gfp_flags)
 366 {
 367         struct usb_request      *req;
 368
 369         req = usb_ep_alloc_request(ep, gfp_flags);
 370
 371         if (req != NULL) {
 372                 req->length = len;
 373                 req->buf = kmalloc(len, gfp_flags);
 374                 if (req->buf == NULL) {
 375                         usb_ep_free_request(ep, req);
 376                         return NULL;
 377                 }
 378         }
 379
 380         return req;
 381 }
 382
 383 static void
 384 printer_req_free(struct usb_ep *ep, struct usb_request *req)
 385 {
 386         if (ep != NULL && req != NULL) {
 387                 kfree(req->buf);
 388                 usb_ep_free_request(ep, req);
 389         }
 390 }
 391
 392 /*-------------------------------------------------------------------------*/
 393
 394 static void rx_complete(struct usb_ep *ep, struct usb_request *req)
 395 {
 396         struct printer_dev      *dev = ep->driver_data;
 397         int                     status = req->status;
 398         unsigned long           flags;
 399
 400         spin_lock_irqsave(&dev->lock, flags);
 401
 402         list_del_init(&req->list);      /* Remode from Active List */
 403
 404         switch (status) {
 405
 406         /* normal completion */
 407         case 0:
 408                 if (req->actual > 0) {
 409                         list_add_tail(&req->list, &dev->rx_buffers);
 410                         DBG(dev, "G_Printer : rx length %d\n", req->actual);
 411                 } else {
 412                         list_add(&req->list, &dev->rx_reqs);
 413                 }
 414                 break;
 415
 416         /* software-driven interface shutdown */
 417         case -ECONNRESET:               /* unlink */
 418         case -ESHUTDOWN:                /* disconnect etc */
 419                 VDBG(dev, "rx shutdown, code %d\n", status);
 420                 list_add(&req->list, &dev->rx_reqs);
 421                 break;
 422
 423         /* for hardware automagic (such as pxa) */
 424         case -ECONNABORTED:             /* endpoint reset */
 425                 DBG(dev, "rx %s reset\n", ep->name);
 426                 list_add(&req->list, &dev->rx_reqs);
 427                 break;
 428
 429         /* data overrun */
 430         case -EOVERFLOW:
 431                 /* FALLTHROUGH */
 432
 433         default:
 434                 DBG(dev, "rx status %d\n", status);
 435                 list_add(&req->list, &dev->rx_reqs);
 436                 break;
 437         }
 438
 439         wake_up_interruptible(&dev->rx_wait);
 440         spin_unlock_irqrestore(&dev->lock, flags);
 441 }
 442
 443 static void tx_complete(struct usb_ep *ep, struct usb_request *req)
 444 {
 445         struct printer_dev      *dev = ep->driver_data;
 446
 447         switch (req->status) {
 448         default:
 449                 VDBG(dev, "tx err %d\n", req->status);
 450                 /* FALLTHROUGH */
 451         case -ECONNRESET:               /* unlink */
 452         case -ESHUTDOWN:                /* disconnect etc */
 453                 break;
 454         case 0:
 455                 break;
 456         }
 457
 458         spin_lock(&dev->lock);
 459         /* Take the request struct off the active list and put it on the
 460          * free list.
 461          */
 462         list_del_init(&req->list);
 463         list_add(&req->list, &dev->tx_reqs);
 464         wake_up_interruptible(&dev->tx_wait);
 465         if (likely(list_empty(&dev->tx_reqs_active)))
 466                 wake_up_interruptible(&dev->tx_flush_wait);
 467
 468         spin_unlock(&dev->lock);
 469 }
 470
 471 /*-------------------------------------------------------------------------*/
 472
 473 static int
 474 printer_open(struct inode *inode, struct file *fd)
 475 {
 476         struct printer_dev      *dev;
 477         unsigned long           flags;
 478         int                     ret = -EBUSY;
 479
 480         mutex_lock(&printer_mutex);
 481         dev = container_of(inode->i_cdev, struct printer_dev, printer_cdev);
 482
 483         spin_lock_irqsave(&dev->lock, flags);
 484
 485         if (!dev->printer_cdev_open) {
 486                 dev->printer_cdev_open = 1;
 487                 fd->private_data = dev;
 488                 ret = 0;
 489                 /* Change the printer status to show that it's on-line. */
 490                 dev->printer_status |= PRINTER_SELECTED;
 491         }
 492
 493         spin_unlock_irqrestore(&dev->lock, flags);
 494
 495         DBG(dev, "printer_open returned %x\n", ret);
 496         mutex_unlock(&printer_mutex);
 497         return ret;
 498 }
 499
 500 static int
 501 printer_close(struct inode *inode, struct file *fd)
 502 {
 503         struct printer_dev      *dev = fd->private_data;
 504         unsigned long           flags;
 505
 506         spin_lock_irqsave(&dev->lock, flags);
 507         dev->printer_cdev_open = 0;
 508         fd->private_data = NULL;
 509         /* Change printer status to show that the printer is off-line. */
 510         dev->printer_status &= ~PRINTER_SELECTED;
 511         spin_unlock_irqrestore(&dev->lock, flags);
 512
 513         DBG(dev, "printer_close\n");
 514
 515         return 0;
 516 }
 517
 518 /* This function must be called with interrupts turned off. */
 519 static void
 520 setup_rx_reqs(struct printer_dev *dev)
 521 {
 522         struct usb_request              *req;
 523
 524         while (likely(!list_empty(&dev->rx_reqs))) {
 525                 int error;
 526
 527                 req = container_of(dev->rx_reqs.next,
 528                                 struct usb_request, list);
 529                 list_del_init(&req->list);
 530
 531                 /* The USB Host sends us whatever amount of data it wants to
 532                  * so we always set the length field to the full USB_BUFSIZE.
 533                  * If the amount of data is more than the read() caller asked
 534                  * for it will be stored in the request buffer until it is
 535                  * asked for by read().
 536                  */
 537                 req->length = USB_BUFSIZE;
 538                 req->complete = rx_complete;
 539
 540                 error = usb_ep_queue(dev->out_ep, req, GFP_ATOMIC);
 541                 if (error) {
 542                         DBG(dev, "rx submit --> %d\n", error);
 543                         list_add(&req->list, &dev->rx_reqs);
 544                         break;
 545                 } else {
 546                         list_add(&req->list, &dev->rx_reqs_active);
 547                 }
 548         }
 549 }
 550
 551 static ssize_t
 552 printer_read(struct file *fd, char __user *buf, size_t len, loff_t *ptr)
 553 {
 554         struct printer_dev              *dev = fd->private_data;
 555         unsigned long                   flags;
 556         size_t                          size;
 557         size_t                          bytes_copied;
 558         struct usb_request              *req;
 559         /* This is a pointer to the current USB rx request. */
 560         struct usb_request              *current_rx_req;
 561         /* This is the number of bytes in the current rx buffer. */
 562         size_t                          current_rx_bytes;
 563         /* This is a pointer to the current rx buffer. */
 564         u8                              *current_rx_buf;
 565
 566         if (len == 0)
 567                 return -EINVAL;
 568
 569         DBG(dev, "printer_read trying to read %d bytes\n", (int)len);
 570
 571         mutex_lock(&dev->lock_printer_io);
 572         spin_lock_irqsave(&dev->lock, flags);
 573
 574         /* We will use this flag later to check if a printer reset happened
 575          * after we turn interrupts back on.
 576          */
 577         dev->reset_printer = 0;
 578
 579         setup_rx_reqs(dev);
 580
 581         bytes_copied = 0;
 582         current_rx_req = dev->current_rx_req;
 583         current_rx_bytes = dev->current_rx_bytes;
 584         current_rx_buf = dev->current_rx_buf;
 585         dev->current_rx_req = NULL;
 586         dev->current_rx_bytes = 0;
 587         dev->current_rx_buf = NULL;
 588
 589         /* Check if there is any data in the read buffers. Please note that
 590          * current_rx_bytes is the number of bytes in the current rx buffer.
 591          * If it is zero then check if there are any other rx_buffers that
 592          * are on the completed list. We are only out of data if all rx
 593          * buffers are empty.
 594          */
 595         if ((current_rx_bytes == 0) &&
 596                         (likely(list_empty(&dev->rx_buffers)))) {
 597                 /* Turn interrupts back on before sleeping. */
 598                 spin_unlock_irqrestore(&dev->lock, flags);
 599
 600                 /*
 601                  * If no data is available check if this is a NON-Blocking
 602                  * call or not.
 603                  */
 604                 if (fd->f_flags & (O_NONBLOCK|O_NDELAY)) {
 605                         mutex_unlock(&dev->lock_printer_io);
 606                         return -EAGAIN;
 607                 }
 608
 609                 /* Sleep until data is available */
 610                 wait_event_interruptible(dev->rx_wait,
 611                                 (likely(!list_empty(&dev->rx_buffers))));
 612                 spin_lock_irqsave(&dev->lock, flags);
 613         }
 614
 615         /* We have data to return then copy it to the caller's buffer.*/
 616         while ((current_rx_bytes || likely(!list_empty(&dev->rx_buffers)))
 617                         && len) {
 618                 if (current_rx_bytes == 0) {
 619                         req = container_of(dev->rx_buffers.next,
 620                                         struct usb_request, list);
 621                         list_del_init(&req->list);
 622
 623                         if (req->actual && req->buf) {
 624                                 current_rx_req = req;
 625                                 current_rx_bytes = req->actual;
 626                                 current_rx_buf = req->buf;
 627                         } else {
 628                                 list_add(&req->list, &dev->rx_reqs);
 629                                 continue;
 630                         }
 631                 }
 632
 633                 /* Don't leave irqs off while doing memory copies */
 634                 spin_unlock_irqrestore(&dev->lock, flags);
 635
 636                 if (len > current_rx_bytes)
 637                         size = current_rx_bytes;
 638                 else
 639                         size = len;
 640
 641                 size -= copy_to_user(buf, current_rx_buf, size);
 642                 bytes_copied += size;
 643                 len -= size;
 644                 buf += size;
 645
 646                 spin_lock_irqsave(&dev->lock, flags);
 647
 648                 /* We've disconnected or reset so return. */
 649                 if (dev->reset_printer) {
 650                         list_add(&current_rx_req->list, &dev->rx_reqs);
 651                         spin_unlock_irqrestore(&dev->lock, flags);
 652                         mutex_unlock(&dev->lock_printer_io);
 653                         return -EAGAIN;
 654                 }
 655
 656                 /* If we not returning all the data left in this RX request
 657                  * buffer then adjust the amount of data left in the buffer.
 658                  * Othewise if we are done with this RX request buffer then
 659                  * requeue it to get any incoming data from the USB host.
 660                  */
 661                 if (size < current_rx_bytes) {
 662                         current_rx_bytes -= size;
 663                         current_rx_buf += size;
 664                 } else {
 665                         list_add(&current_rx_req->list, &dev->rx_reqs);
 666                         current_rx_bytes = 0;
 667                         current_rx_buf = NULL;
 668                         current_rx_req = NULL;
 669                 }
 670         }
 671
 672         dev->current_rx_req = current_rx_req;
 673         dev->current_rx_bytes = current_rx_bytes;
 674         dev->current_rx_buf = current_rx_buf;
 675
 676         spin_unlock_irqrestore(&dev->lock, flags);
 677         mutex_unlock(&dev->lock_printer_io);
 678
 679         DBG(dev, "printer_read returned %d bytes\n", (int)bytes_copied);
 680
 681         if (bytes_copied)
 682                 return bytes_copied;
 683         else
 684                 return -EAGAIN;
 685 }
 686
 687 static ssize_t
 688 printer_write(struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
 689 {
 690         struct printer_dev      *dev = fd->private_data;
 691         unsigned long           flags;
 692         size_t                  size;   /* Amount of data in a TX request. */
 693         size_t                  bytes_copied = 0;
 694         struct usb_request      *req;
 695
 696         DBG(dev, "printer_write trying to send %d bytes\n", (int)len);
 697
 698         if (len == 0)
 699                 return -EINVAL;
 700
 701         mutex_lock(&dev->lock_printer_io);
 702         spin_lock_irqsave(&dev->lock, flags);
 703
 704         /* Check if a printer reset happens while we have interrupts on */
 705         dev->reset_printer = 0;
 706
 707         /* Check if there is any available write buffers */
 708         if (likely(list_empty(&dev->tx_reqs))) {
 709                 /* Turn interrupts back on before sleeping. */
 710                 spin_unlock_irqrestore(&dev->lock, flags);
 711
 712                 /*
 713                  * If write buffers are available check if this is
 714                  * a NON-Blocking call or not.
 715                  */
 716                 if (fd->f_flags & (O_NONBLOCK|O_NDELAY)) {
 717                         mutex_unlock(&dev->lock_printer_io);
 718                         return -EAGAIN;
 719                 }
 720
 721                 /* Sleep until a write buffer is available */
 722                 wait_event_interruptible(dev->tx_wait,
 723                                 (likely(!list_empty(&dev->tx_reqs))));
 724                 spin_lock_irqsave(&dev->lock, flags);
 725         }
 726
 727         while (likely(!list_empty(&dev->tx_reqs)) && len) {
 728
 729                 if (len > USB_BUFSIZE)
 730                         size = USB_BUFSIZE;
 731                 else
 732                         size = len;
 733
 734                 req = container_of(dev->tx_reqs.next, struct usb_request,
 735                                 list);
 736                 list_del_init(&req->list);
 737
 738                 req->complete = tx_complete;
 739                 req->length = size;
 740
 741                 /* Check if we need to send a zero length packet. */
 742                 if (len > size)
 743                         /* They will be more TX requests so no yet. */
 744                         req->zero = 0;
 745                 else
 746                         /* If the data amount is not a multple of the
 747                          * maxpacket size then send a zero length packet.
 748                          */
 749                         req->zero = ((len % dev->in_ep->maxpacket) == 0);
 750
 751                 /* Don't leave irqs off while doing memory copies */
 752                 spin_unlock_irqrestore(&dev->lock, flags);
 753
 754                 if (copy_from_user(req->buf, buf, size)) {
 755                         list_add(&req->list, &dev->tx_reqs);
 756                         mutex_unlock(&dev->lock_printer_io);
 757                         return bytes_copied;
 758                 }
 759
 760                 bytes_copied += size;
 761                 len -= size;
 762                 buf += size;
 763
 764                 spin_lock_irqsave(&dev->lock, flags);
 765
 766                 /* We've disconnected or reset so free the req and buffer */
 767                 if (dev->reset_printer) {
 768                         list_add(&req->list, &dev->tx_reqs);
 769                         spin_unlock_irqrestore(&dev->lock, flags);
 770                         mutex_unlock(&dev->lock_printer_io);
 771                         return -EAGAIN;
 772                 }
 773
 774                 if (usb_ep_queue(dev->in_ep, req, GFP_ATOMIC)) {
 775                         list_add(&req->list, &dev->tx_reqs);
 776                         spin_unlock_irqrestore(&dev->lock, flags);
 777                         mutex_unlock(&dev->lock_printer_io);
 778                         return -EAGAIN;
 779                 }
 780
 781                 list_add(&req->list, &dev->tx_reqs_active);
 782
 783         }
 784
 785         spin_unlock_irqrestore(&dev->lock, flags);
 786         mutex_unlock(&dev->lock_printer_io);
 787
 788         DBG(dev, "printer_write sent %d bytes\n", (int)bytes_copied);
 789
 790         if (bytes_copied) {
 791                 return bytes_copied;
 792         } else {
 793                 return -EAGAIN;
 794         }
 795 }
 796
 797 static int
 798 printer_fsync(struct file *fd, int datasync)
 799 {
 800         struct printer_dev      *dev = fd->private_data;
 801         unsigned long           flags;
 802         int                     tx_list_empty;
 803
 804         spin_lock_irqsave(&dev->lock, flags);
 805         tx_list_empty = (likely(list_empty(&dev->tx_reqs)));
 806         spin_unlock_irqrestore(&dev->lock, flags);
 807
 808         if (!tx_list_empty) {
 809                 /* Sleep until all data has been sent */
 810                 wait_event_interruptible(dev->tx_flush_wait,
 811                                 (likely(list_empty(&dev->tx_reqs_active))));
 812         }
 813
 814         return 0;
 815 }
 816
 817 static unsigned int
 818 printer_poll(struct file *fd, poll_table *wait)
 819 {
 820         struct printer_dev      *dev = fd->private_data;
 821         unsigned long           flags;
 822         int                     status = 0;
 823
 824         mutex_lock(&dev->lock_printer_io);
 825         spin_lock_irqsave(&dev->lock, flags);
 826         setup_rx_reqs(dev);
 827         spin_unlock_irqrestore(&dev->lock, flags);
 828         mutex_unlock(&dev->lock_printer_io);
 829
 830         poll_wait(fd, &dev->rx_wait, wait);
 831         poll_wait(fd, &dev->tx_wait, wait);
 832
 833         spin_lock_irqsave(&dev->lock, flags);
 834         if (likely(!list_empty(&dev->tx_reqs)))
 835                 status |= POLLOUT | POLLWRNORM;
 836
 837         if (likely(dev->current_rx_bytes) ||
 838                         likely(!list_empty(&dev->rx_buffers)))
 839                 status |= POLLIN | POLLRDNORM;
 840
 841         spin_unlock_irqrestore(&dev->lock, flags);
 842
 843         return status;
 844 }
 845
 846 static long
 847 printer_ioctl(struct file *fd, unsigned int code, unsigned long arg)
 848 {
 849         struct printer_dev      *dev = fd->private_data;
 850         unsigned long           flags;
 851         int                     status = 0;
 852
 853         DBG(dev, "printer_ioctl: cmd=0x%4.4x, arg=%lu\n", code, arg);
 854
 855         /* handle ioctls */
 856
 857         spin_lock_irqsave(&dev->lock, flags);
 858
 859         switch (code) {
 860         case GADGET_GET_PRINTER_STATUS:
 861                 status = (int)dev->printer_status;
 862                 break;
 863         case GADGET_SET_PRINTER_STATUS:
 864                 dev->printer_status = (u8)arg;
 865                 break;
 866         default:
 867                 /* could not handle ioctl */
 868                 DBG(dev, "printer_ioctl: ERROR cmd=0x%4.4xis not supported\n",
 869                                 code);
 870                 status = -ENOTTY;
 871         }
 872
 873         spin_unlock_irqrestore(&dev->lock, flags);
 874
 875         return status;
 876 }
 877
 878 /* used after endpoint configuration */
 879 static const struct file_operations printer_io_operations = {
 880         .owner =        THIS_MODULE,
 881         .open =         printer_open,
 882         .read =         printer_read,
 883         .write =        printer_write,
 884         .fsync =        printer_fsync,
 885         .poll =         printer_poll,
 886         .unlocked_ioctl = printer_ioctl,
 887         .release =      printer_close,
 888         .llseek =       noop_llseek,
 889 };
 890
 891 /*-------------------------------------------------------------------------*/
 892
 893 static int
 894 set_printer_interface(struct printer_dev *dev)
 895 {
 896         int                     result = 0;
 897
 898         dev->in = ep_desc(dev->gadget, &hs_ep_in_desc, &fs_ep_in_desc);
 899         dev->in_ep->driver_data = dev;
 900
 901         dev->out = ep_desc(dev->gadget, &hs_ep_out_desc, &fs_ep_out_desc);
 902         dev->out_ep->driver_data = dev;
 903
 904         result = usb_ep_enable(dev->in_ep, dev->in);
 905         if (result != 0) {
 906                 DBG(dev, "enable %s --> %d\n", dev->in_ep->name, result);
 907                 goto done;
 908         }
 909
 910         result = usb_ep_enable(dev->out_ep, dev->out);
 911         if (result != 0) {
 912                 DBG(dev, "enable %s --> %d\n", dev->in_ep->name, result);
 913                 goto done;
 914         }
 915
 916 done:
 917         /* on error, disable any endpoints  */
 918         if (result != 0) {
 919                 (void) usb_ep_disable(dev->in_ep);
 920                 (void) usb_ep_disable(dev->out_ep);
 921                 dev->in = NULL;
 922                 dev->out = NULL;
 923         }
 924
 925         /* caller is responsible for cleanup on error */
 926         return result;
 927 }
 928
 929 static void printer_reset_interface(struct printer_dev *dev)
 930 {
 931         if (dev->interface < 0)
 932                 return;
 933
 934         DBG(dev, "%s\n", __func__);
 935
 936         if (dev->in)
 937                 usb_ep_disable(dev->in_ep);
 938
 939         if (dev->out)
 940                 usb_ep_disable(dev->out_ep);
 941
 942         dev->interface = -1;
 943 }
 944
 945 /* change our operational config.  must agree with the code
 946  * that returns config descriptors, and altsetting code.
 947  */
 948 static int
 949 printer_set_config(struct printer_dev *dev, unsigned number)
 950 {
 951         int                     result = 0;
 952         struct usb_gadget       *gadget = dev->gadget;
 953
 954         switch (number) {
 955         case DEV_CONFIG_VALUE:
 956                 result = 0;
 957                 break;
 958         default:
 959                 result = -EINVAL;
 960                 /* FALL THROUGH */
 961         case 0:
 962                 break;
 963         }
 964
 965         if (result) {
 966                 usb_gadget_vbus_draw(dev->gadget,
 967                                 dev->gadget->is_otg ? 8 : 100);
 968         } else {
 969                 char *speed;
 970                 unsigned power;
 971
 972                 power = 2 * config_desc.bMaxPower;
 973                 usb_gadget_vbus_draw(dev->gadget, power);
 974
 975                 switch (gadget->speed) {
 976                 case USB_SPEED_FULL:    speed = "full"; break;
 977 #ifdef CONFIG_USB_GADGET_DUALSPEED
 978                 case USB_SPEED_HIGH:    speed = "high"; break;
 979 #endif
 980                 default:                speed = "?"; break;
 981                 }
 982
 983                 dev->config = number;
 984                 INFO(dev, "%s speed config #%d: %d mA, %s\n",
 985                                 speed, number, power, driver_desc);
 986         }
 987         return result;
 988 }
 989
 990 static int
 991 config_buf(enum usb_device_speed speed, u8 *buf, u8 type, unsigned index,
 992                 int is_otg)
 993 {
 994         int                                     len;
 995         const struct usb_descriptor_header      **function;
 996 #ifdef CONFIG_USB_GADGET_DUALSPEED
 997         int                                     hs = (speed == USB_SPEED_HIGH);
 998
 999         if (type == USB_DT_OTHER_SPEED_CONFIG)
1000                 hs = !hs;
1001
1002         if (hs) {
1003                 function = hs_printer_function;
1004         } else {
1005                 function = fs_printer_function;
1006         }
1007 #else
1008         function = fs_printer_function;
1009 #endif
1010
1011         if (index >= device_desc.bNumConfigurations)
1012                 return -EINVAL;
1013
1014         /* for now, don't advertise srp-only devices */
1015         if (!is_otg)
1016                 function++;
1017
1018         len = usb_gadget_config_buf(&config_desc, buf, USB_DESC_BUFSIZE,
1019                         function);
1020         if (len < 0)
1021                 return len;
1022         ((struct usb_config_descriptor *) buf)->bDescriptorType = type;
1023         return len;
1024 }
1025
1026 /* Change our operational Interface. */
1027 static int
1028 set_interface(struct printer_dev *dev, unsigned number)
1029 {
1030         int                     result = 0;
1031
1032         /* Free the current interface */
1033         switch (dev->interface) {
1034         case PRINTER_INTERFACE:
1035                 printer_reset_interface(dev);
1036                 break;
1037         }
1038
1039         switch (number) {
1040         case PRINTER_INTERFACE:
1041                 result = set_printer_interface(dev);
1042                 if (result) {
1043                         printer_reset_interface(dev);
1044                 } else {
1045                         dev->interface = PRINTER_INTERFACE;
1046                 }
1047                 break;
1048         default:
1049                 result = -EINVAL;
1050                 /* FALL THROUGH */
1051         }
1052
1053         if (!result)
1054                 INFO(dev, "Using interface %x\n", number);
1055
1056         return result;
1057 }
1058
1059 static void printer_setup_complete(struct usb_ep *ep, struct usb_request *req)
1060 {
1061         if (req->status || req->actual != req->length)
1062                 DBG((struct printer_dev *) ep->driver_data,
1063                                 "setup complete --> %d, %d/%d\n",
1064                                 req->status, req->actual, req->length);
1065 }
1066
1067 static void printer_soft_reset(struct printer_dev *dev)
1068 {
1069         struct usb_request      *req;
1070
1071         INFO(dev, "Received Printer Reset Request\n");
1072
1073         if (usb_ep_disable(dev->in_ep))
1074                 DBG(dev, "Failed to disable USB in_ep\n");
1075         if (usb_ep_disable(dev->out_ep))
1076                 DBG(dev, "Failed to disable USB out_ep\n");
1077
1078         if (dev->current_rx_req != NULL) {
1079                 list_add(&dev->current_rx_req->list, &dev->rx_reqs);
1080                 dev->current_rx_req = NULL;
1081         }
1082         dev->current_rx_bytes = 0;
1083         dev->current_rx_buf = NULL;
1084         dev->reset_printer = 1;
1085
1086         while (likely(!(list_empty(&dev->rx_buffers)))) {
1087                 req = container_of(dev->rx_buffers.next, struct usb_request,
1088                                 list);
1089                 list_del_init(&req->list);
1090                 list_add(&req->list, &dev->rx_reqs);
1091         }
1092
1093         while (likely(!(list_empty(&dev->rx_reqs_active)))) {
1094                 req = container_of(dev->rx_buffers.next, struct usb_request,
1095                                 list);
1096                 list_del_init(&req->list);
1097                 list_add(&req->list, &dev->rx_reqs);
1098         }
1099
1100         while (likely(!(list_empty(&dev->tx_reqs_active)))) {
1101                 req = container_of(dev->tx_reqs_active.next,
1102                                 struct usb_request, list);
1103                 list_del_init(&req->list);
1104                 list_add(&req->list, &dev->tx_reqs);
1105         }
1106
1107         if (usb_ep_enable(dev->in_ep, dev->in))
1108                 DBG(dev, "Failed to enable USB in_ep\n");
1109         if (usb_ep_enable(dev->out_ep, dev->out))
1110                 DBG(dev, "Failed to enable USB out_ep\n");
1111
1112         wake_up_interruptible(&dev->rx_wait);
1113         wake_up_interruptible(&dev->tx_wait);
1114         wake_up_interruptible(&dev->tx_flush_wait);
1115 }
1116
1117 /*-------------------------------------------------------------------------*/
1118
1119 /*
1120  * The setup() callback implements all the ep0 functionality that's not
1121  * handled lower down.
1122  */
1123 static int
1124 printer_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
1125 {
1126         struct printer_dev      *dev = get_gadget_data(gadget);
1127         struct usb_request      *req = dev->req;
1128         int                     value = -EOPNOTSUPP;
1129         u16                     wIndex = le16_to_cpu(ctrl->wIndex);
1130         u16                     wValue = le16_to_cpu(ctrl->wValue);
1131         u16                     wLength = le16_to_cpu(ctrl->wLength);
1132
1133         DBG(dev, "ctrl req%02x.%02x v%04x i%04x l%d\n",
1134                 ctrl->bRequestType, ctrl->bRequest, wValue, wIndex, wLength);
1135
1136         req->complete = printer_setup_complete;
1137
1138         switch (ctrl->bRequestType&USB_TYPE_MASK) {
1139
1140         case USB_TYPE_STANDARD:
1141                 switch (ctrl->bRequest) {
1142
1143                 case USB_REQ_GET_DESCRIPTOR:
1144                         if (ctrl->bRequestType != USB_DIR_IN)
1145                                 break;
1146                         switch (wValue >> 8) {
1147
1148                         case USB_DT_DEVICE:
1149                                 value = min(wLength, (u16) sizeof device_desc);
1150                                 memcpy(req->buf, &device_desc, value);
1151                                 break;
1152 #ifdef CONFIG_USB_GADGET_DUALSPEED
1153                         case USB_DT_DEVICE_QUALIFIER:
1154                                 if (!gadget->is_dualspeed)
1155                                         break;
1156                                 value = min(wLength,
1157                                                 (u16) sizeof dev_qualifier);
1158                                 memcpy(req->buf, &dev_qualifier, value);
1159                                 break;
1160
1161                         case USB_DT_OTHER_SPEED_CONFIG:
1162                                 if (!gadget->is_dualspeed)
1163                                         break;
1164                                 /* FALLTHROUGH */
1165 #endif /* CONFIG_USB_GADGET_DUALSPEED */
1166                         case USB_DT_CONFIG:
1167                                 value = config_buf(gadget->speed, req->buf,
1168                                                 wValue >> 8,
1169                                                 wValue & 0xff,
1170                                                 gadget->is_otg);
1171                                 if (value >= 0)
1172                                         value = min(wLength, (u16) value);
1173                                 break;
1174
1175                         case USB_DT_STRING:
1176                                 value = usb_gadget_get_string(&stringtab,
1177                                                 wValue & 0xff, req->buf);
1178                                 if (value >= 0)
1179                                         value = min(wLength, (u16) value);
1180                                 break;
1181                         }
1182                         break;
1183
1184                 case USB_REQ_SET_CONFIGURATION:
1185                         if (ctrl->bRequestType != 0)
1186                                 break;
1187                         if (gadget->a_hnp_support)
1188                                 DBG(dev, "HNP available\n");
1189                         else if (gadget->a_alt_hnp_support)
1190                                 DBG(dev, "HNP needs a different root port\n");
1191                         value = printer_set_config(dev, wValue);
1192                         break;
1193                 case USB_REQ_GET_CONFIGURATION:
1194                         if (ctrl->bRequestType != USB_DIR_IN)
1195                                 break;
1196                         *(u8 *)req->buf = dev->config;
1197                         value = min(wLength, (u16) 1);
1198                         break;
1199
1200                 case USB_REQ_SET_INTERFACE:
1201                         if (ctrl->bRequestType != USB_RECIP_INTERFACE ||
1202                                         !dev->config)
1203                                 break;
1204
1205                         value = set_interface(dev, PRINTER_INTERFACE);
1206                         break;
1207                 case USB_REQ_GET_INTERFACE:
1208                         if (ctrl->bRequestType !=
1209                                         (USB_DIR_IN|USB_RECIP_INTERFACE)
1210                                         || !dev->config)
1211                                 break;
1212
1213                         *(u8 *)req->buf = dev->interface;
1214                         value = min(wLength, (u16) 1);
1215                         break;
1216
1217                 default:
1218                         goto unknown;
1219                 }
1220                 break;
1221
1222         case USB_TYPE_CLASS:
1223                 switch (ctrl->bRequest) {
1224                 case 0: /* Get the IEEE-1284 PNP String */
1225                         /* Only one printer interface is supported. */
1226                         if ((wIndex>>8) != PRINTER_INTERFACE)
1227                                 break;
1228
1229                         value = (pnp_string[0]<<8)|pnp_string[1];
1230                         memcpy(req->buf, pnp_string, value);
1231                         DBG(dev, "1284 PNP String: %x %s\n", value,
1232                                         &pnp_string[2]);
1233                         break;
1234
1235                 case 1: /* Get Port Status */
1236                         /* Only one printer interface is supported. */
1237                         if (wIndex != PRINTER_INTERFACE)
1238                                 break;
1239
1240                         *(u8 *)req->buf = dev->printer_status;
1241                         value = min(wLength, (u16) 1);
1242                         break;
1243
1244                 case 2: /* Soft Reset */
1245                         /* Only one printer interface is supported. */
1246                         if (wIndex != PRINTER_INTERFACE)
1247                                 break;
1248
1249                         printer_soft_reset(dev);
1250
1251                         value = 0;
1252                         break;
1253
1254                 default:
1255                         goto unknown;
1256                 }
1257                 break;
1258
1259         default:
1260 unknown:
1261                 VDBG(dev,
1262                         "unknown ctrl req%02x.%02x v%04x i%04x l%d\n",
1263                         ctrl->bRequestType, ctrl->bRequest,
1264                         wValue, wIndex, wLength);
1265                 break;
1266         }
1267
1268         /* respond with data transfer before status phase? */
1269         if (value >= 0) {
1270                 req->length = value;
1271                 req->zero = value < wLength;
1272                 value = usb_ep_queue(gadget->ep0, req, GFP_ATOMIC);
1273                 if (value < 0) {
1274                         DBG(dev, "ep_queue --> %d\n", value);
1275                         req->status = 0;
1276                         printer_setup_complete(gadget->ep0, req);
1277                 }
1278         }
1279
1280         /* host either stalls (value < 0) or reports success */
1281         return value;
1282 }
1283
1284 static void
1285 printer_disconnect(struct usb_gadget *gadget)
1286 {
1287         struct printer_dev      *dev = get_gadget_data(gadget);
1288         unsigned long           flags;
1289
1290         DBG(dev, "%s\n", __func__);
1291
1292         spin_lock_irqsave(&dev->lock, flags);
1293
1294         printer_reset_interface(dev);
1295
1296         spin_unlock_irqrestore(&dev->lock, flags);
1297 }
1298
1299 static void
1300 printer_unbind(struct usb_gadget *gadget)
1301 {
1302         struct printer_dev      *dev = get_gadget_data(gadget);
1303         struct usb_request      *req;
1304
1305
1306         DBG(dev, "%s\n", __func__);
1307
1308         /* Remove sysfs files */
1309         device_destroy(usb_gadget_class, g_printer_devno);
1310
1311         /* Remove Character Device */
1312         cdev_del(&dev->printer_cdev);
1313
1314         /* we must already have been disconnected ... no i/o may be active */
1315         WARN_ON(!list_empty(&dev->tx_reqs_active));
1316         WARN_ON(!list_empty(&dev->rx_reqs_active));
1317
1318         /* Free all memory for this driver. */
1319         while (!list_empty(&dev->tx_reqs)) {
1320                 req = container_of(dev->tx_reqs.next, struct usb_request,
1321                                 list);
1322                 list_del(&req->list);
1323                 printer_req_free(dev->in_ep, req);
1324         }
1325
1326         if (dev->current_rx_req != NULL)
1327                 printer_req_free(dev->out_ep, dev->current_rx_req);
1328
1329         while (!list_empty(&dev->rx_reqs)) {
1330                 req = container_of(dev->rx_reqs.next,
1331                                 struct usb_request, list);
1332                 list_del(&req->list);
1333                 printer_req_free(dev->out_ep, req);
1334         }
1335
1336         while (!list_empty(&dev->rx_buffers)) {
1337                 req = container_of(dev->rx_buffers.next,
1338                                 struct usb_request, list);
1339                 list_del(&req->list);
1340                 printer_req_free(dev->out_ep, req);
1341         }
1342
1343         if (dev->req) {
1344                 printer_req_free(gadget->ep0, dev->req);
1345                 dev->req = NULL;
1346         }
1347
1348         set_gadget_data(gadget, NULL);
1349 }
1350
1351 static int __ref
1352 printer_bind(struct usb_gadget *gadget)
1353 {
1354         struct printer_dev      *dev;
1355         struct usb_ep           *in_ep, *out_ep;
1356         int                     status = -ENOMEM;
1357         int                     gcnum;
1358         size_t                  len;
1359         u32                     i;
1360         struct usb_request      *req;
1361
1362         dev = &usb_printer_gadget;
1363
1364
1365         /* Setup the sysfs files for the printer gadget. */
1366         dev->pdev = device_create(usb_gadget_class, NULL, g_printer_devno,
1367                                   NULL, "g_printer");
1368         if (IS_ERR(dev->pdev)) {
1369                 ERROR(dev, "Failed to create device: g_printer\n");
1370                 goto fail;
1371         }
1372
1373         /*
1374          * Register a character device as an interface to a user mode
1375          * program that handles the printer specific functionality.
1376          */
1377         cdev_init(&dev->printer_cdev, &printer_io_operations);
1378         dev->printer_cdev.owner = THIS_MODULE;
1379         status = cdev_add(&dev->printer_cdev, g_printer_devno, 1);
1380         if (status) {
1381                 ERROR(dev, "Failed to open char device\n");
1382                 goto fail;
1383         }
1384
1385         gcnum = usb_gadget_controller_number(gadget);
1386         if (gcnum >= 0) {
1387                 device_desc.bcdDevice = cpu_to_le16(0x0200 + gcnum);
1388         } else {
1389                 dev_warn(&gadget->dev, "controller '%s' not recognized\n",
1390                         gadget->name);
1391                 /* unrecognized, but safe unless bulk is REALLY quirky */
1392                 device_desc.bcdDevice =
1393                         cpu_to_le16(0xFFFF);
1394         }
1395         snprintf(manufacturer, sizeof(manufacturer), "%s %s with %s",
1396                 init_utsname()->sysname, init_utsname()->release,
1397                 gadget->name);
1398
1399         device_desc.idVendor =
1400                 cpu_to_le16(PRINTER_VENDOR_NUM);
1401         device_desc.idProduct =
1402                 cpu_to_le16(PRINTER_PRODUCT_NUM);
1403
1404         /* support optional vendor/distro customization */
1405         if (idVendor) {
1406                 if (!idProduct) {
1407                         dev_err(&gadget->dev, "idVendor needs idProduct!\n");
1408                         return -ENODEV;
1409                 }
1410                 device_desc.idVendor = cpu_to_le16(idVendor);
1411                 device_desc.idProduct = cpu_to_le16(idProduct);
1412                 if (bcdDevice)
1413                         device_desc.bcdDevice = cpu_to_le16(bcdDevice);
1414         }
1415
1416         if (iManufacturer)
1417                 strlcpy(manufacturer, iManufacturer, sizeof manufacturer);
1418
1419         if (iProduct)
1420                 strlcpy(product_desc, iProduct, sizeof product_desc);
1421
1422         if (iSerialNum)
1423                 strlcpy(serial_num, iSerialNum, sizeof serial_num);
1424
1425         if (iPNPstring)
1426                 strlcpy(&pnp_string[2], iPNPstring, (sizeof pnp_string)-2);
1427
1428         len = strlen(pnp_string);
1429         pnp_string[0] = (len >> 8) & 0xFF;
1430         pnp_string[1] = len & 0xFF;
1431
1432         /* all we really need is bulk IN/OUT */
1433         usb_ep_autoconfig_reset(gadget);
1434         in_ep = usb_ep_autoconfig(gadget, &fs_ep_in_desc);
1435         if (!in_ep) {
1436 autoconf_fail:
1437                 dev_err(&gadget->dev, "can't autoconfigure on %s\n",
1438                         gadget->name);
1439                 return -ENODEV;
1440         }
1441         in_ep->driver_data = in_ep;     /* claim */
1442
1443         out_ep = usb_ep_autoconfig(gadget, &fs_ep_out_desc);
1444         if (!out_ep)
1445                 goto autoconf_fail;
1446         out_ep->driver_data = out_ep;   /* claim */
1447
1448 #ifdef  CONFIG_USB_GADGET_DUALSPEED
1449         /* assumes ep0 uses the same value for both speeds ... */
1450         dev_qualifier.bMaxPacketSize0 = device_desc.bMaxPacketSize0;
1451
1452         /* and that all endpoints are dual-speed */
1453         hs_ep_in_desc.bEndpointAddress = fs_ep_in_desc.bEndpointAddress;
1454         hs_ep_out_desc.bEndpointAddress = fs_ep_out_desc.bEndpointAddress;
1455 #endif  /* DUALSPEED */
1456
1457         device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket;
1458         usb_gadget_set_selfpowered(gadget);
1459
1460         if (gadget->is_otg) {
1461                 otg_desc.bmAttributes |= USB_OTG_HNP,
1462                 config_desc.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
1463         }
1464
1465         spin_lock_init(&dev->lock);
1466         mutex_init(&dev->lock_printer_io);
1467         INIT_LIST_HEAD(&dev->tx_reqs);
1468         INIT_LIST_HEAD(&dev->tx_reqs_active);
1469         INIT_LIST_HEAD(&dev->rx_reqs);
1470         INIT_LIST_HEAD(&dev->rx_reqs_active);
1471         INIT_LIST_HEAD(&dev->rx_buffers);
1472         init_waitqueue_head(&dev->rx_wait);
1473         init_waitqueue_head(&dev->tx_wait);
1474         init_waitqueue_head(&dev->tx_flush_wait);
1475
1476         dev->config = 0;
1477         dev->interface = -1;
1478         dev->printer_cdev_open = 0;
1479         dev->printer_status = PRINTER_NOT_ERROR;
1480         dev->current_rx_req = NULL;
1481         dev->current_rx_bytes = 0;
1482         dev->current_rx_buf = NULL;
1483
1484         dev->in_ep = in_ep;
1485         dev->out_ep = out_ep;
1486
1487         /* preallocate control message data and buffer */
1488         dev->req = printer_req_alloc(gadget->ep0, USB_DESC_BUFSIZE,
1489                         GFP_KERNEL);
1490         if (!dev->req) {
1491                 status = -ENOMEM;
1492                 goto fail;
1493         }
1494
1495         for (i = 0; i < QLEN; i++) {
1496                 req = printer_req_alloc(dev->in_ep, USB_BUFSIZE, GFP_KERNEL);
1497                 if (!req) {
1498                         while (!list_empty(&dev->tx_reqs)) {
1499                                 req = container_of(dev->tx_reqs.next,
1500                                                 struct usb_request, list);
1501                                 list_del(&req->list);
1502                                 printer_req_free(dev->in_ep, req);
1503                         }
1504                         return -ENOMEM;
1505                 }
1506                 list_add(&req->list, &dev->tx_reqs);
1507         }
1508
1509         for (i = 0; i < QLEN; i++) {
1510                 req = printer_req_alloc(dev->out_ep, USB_BUFSIZE, GFP_KERNEL);
1511                 if (!req) {
1512                         while (!list_empty(&dev->rx_reqs)) {
1513                                 req = container_of(dev->rx_reqs.next,
1514                                                 struct usb_request, list);
1515                                 list_del(&req->list);
1516                                 printer_req_free(dev->out_ep, req);
1517                         }
1518                         return -ENOMEM;
1519                 }
1520                 list_add(&req->list, &dev->rx_reqs);
1521         }
1522
1523         dev->req->complete = printer_setup_complete;
1524
1525         /* finish hookup to lower layer ... */
1526         dev->gadget = gadget;
1527         set_gadget_data(gadget, dev);
1528         gadget->ep0->driver_data = dev;
1529
1530         INFO(dev, "%s, version: " DRIVER_VERSION "\n", driver_desc);
1531         INFO(dev, "using %s, OUT %s IN %s\n", gadget->name, out_ep->name,
1532                         in_ep->name);
1533
1534         return 0;
1535
1536 fail:
1537         printer_unbind(gadget);
1538         return status;
1539 }
1540
1541 /*-------------------------------------------------------------------------*/
1542
1543 static struct usb_gadget_driver printer_driver = {
1544         .speed          = DEVSPEED,
1545
1546         .function       = (char *) driver_desc,
1547         .bind           = printer_bind,
1548         .unbind         = printer_unbind,
1549
1550         .setup          = printer_setup,
1551         .disconnect     = printer_disconnect,
1552
1553         .driver         = {
1554                 .name           = (char *) shortname,
1555                 .owner          = THIS_MODULE,
1556         },
1557 };
1558
1559 MODULE_DESCRIPTION(DRIVER_DESC);
1560 MODULE_AUTHOR("Craig Nadler");
1561 MODULE_LICENSE("GPL");
1562
1563 static int __init
1564 init(void)
1565 {
1566         int status;
1567
1568         usb_gadget_class = class_create(THIS_MODULE, "usb_printer_gadget");
1569         if (IS_ERR(usb_gadget_class)) {
1570                 status = PTR_ERR(usb_gadget_class);
1571                 ERROR(dev, "unable to create usb_gadget class %d\n", status);
1572                 return status;
1573         }
1574
1575         status = alloc_chrdev_region(&g_printer_devno, 0, 1,
1576                         "USB printer gadget");
1577         if (status) {
1578                 ERROR(dev, "alloc_chrdev_region %d\n", status);
1579                 class_destroy(usb_gadget_class);
1580                 return status;
1581         }
1582
1583         status = usb_gadget_register_driver(&printer_driver);
1584         if (status) {
1585                 class_destroy(usb_gadget_class);
1586                 unregister_chrdev_region(g_printer_devno, 1);
1587                 DBG(dev, "usb_gadget_register_driver %x\n", status);
1588         }
1589
1590         return status;
1591 }
1592 module_init(init);
1593
1594 static void __exit
1595 cleanup(void)
1596 {
1597         int status;
1598
1599         mutex_lock(&usb_printer_gadget.lock_printer_io);
1600         class_destroy(usb_gadget_class);
1601         unregister_chrdev_region(g_printer_devno, 2);
1602
1603         status = usb_gadget_unregister_driver(&printer_driver);
1604         if (status)
1605                 ERROR(dev, "usb_gadget_unregister_driver %x\n", status);
1606
1607         mutex_unlock(&usb_printer_gadget.lock_printer_io);
1608 }
1609 module_exit(cleanup);