drivers/usb/gadget/net2272.h

   1 /*
   2  * PLX NET2272 high/full speed USB device controller
   3  *
   4  * Copyright (C) 2005-2006 PLX Technology, Inc.
   5  * Copyright (C) 2006-2011 Analog Devices, Inc.
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License as published by
   9  * the Free Software Foundation; either version 2 of the License, or
  10  * (at your option) any later version.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software
  19  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  20  */
  21
  22 #ifndef __NET2272_H__
  23 #define __NET2272_H__
  24
  25 /* Main Registers */
  26 #define REGADDRPTR                      0x00
  27 #define REGDATA                         0x01
  28 #define IRQSTAT0                        0x02
  29 #define         ENDPOINT_0_INTERRUPT                    0
  30 #define         ENDPOINT_A_INTERRUPT                    1
  31 #define         ENDPOINT_B_INTERRUPT                    2
  32 #define         ENDPOINT_C_INTERRUPT                    3
  33 #define         VIRTUALIZED_ENDPOINT_INTERRUPT          4
  34 #define         SETUP_PACKET_INTERRUPT                  5
  35 #define         DMA_DONE_INTERRUPT                      6
  36 #define         SOF_INTERRUPT                           7
  37 #define IRQSTAT1                        0x03
  38 #define         CONTROL_STATUS_INTERRUPT                1
  39 #define         VBUS_INTERRUPT                          2
  40 #define         SUSPEND_REQUEST_INTERRUPT               3
  41 #define         SUSPEND_REQUEST_CHANGE_INTERRUPT        4
  42 #define         RESUME_INTERRUPT                        5
  43 #define         ROOT_PORT_RESET_INTERRUPT               6
  44 #define         RESET_STATUS                            7
  45 #define PAGESEL                         0x04
  46 #define DMAREQ                          0x1c
  47 #define         DMA_ENDPOINT_SELECT                     0
  48 #define         DREQ_POLARITY                           1
  49 #define         DACK_POLARITY                           2
  50 #define         EOT_POLARITY                            3
  51 #define         DMA_CONTROL_DACK                        4
  52 #define         DMA_REQUEST_ENABLE                      5
  53 #define         DMA_REQUEST                             6
  54 #define         DMA_BUFFER_VALID                        7
  55 #define SCRATCH                         0x1d
  56 #define IRQENB0                         0x20
  57 #define         ENDPOINT_0_INTERRUPT_ENABLE             0
  58 #define         ENDPOINT_A_INTERRUPT_ENABLE             1
  59 #define         ENDPOINT_B_INTERRUPT_ENABLE             2
  60 #define         ENDPOINT_C_INTERRUPT_ENABLE             3
  61 #define         VIRTUALIZED_ENDPOINT_INTERRUPT_ENABLE   4
  62 #define         SETUP_PACKET_INTERRUPT_ENABLE           5
  63 #define         DMA_DONE_INTERRUPT_ENABLE               6
  64 #define         SOF_INTERRUPT_ENABLE                    7
  65 #define IRQENB1                         0x21
  66 #define         VBUS_INTERRUPT_ENABLE                   2
  67 #define         SUSPEND_REQUEST_INTERRUPT_ENABLE        3
  68 #define         SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE 4
  69 #define         RESUME_INTERRUPT_ENABLE                 5
  70 #define         ROOT_PORT_RESET_INTERRUPT_ENABLE        6
  71 #define LOCCTL                          0x22
  72 #define         DATA_WIDTH                              0
  73 #define         LOCAL_CLOCK_OUTPUT                      1
  74 #define                 LOCAL_CLOCK_OUTPUT_OFF                  0
  75 #define                 LOCAL_CLOCK_OUTPUT_3_75MHZ              1
  76 #define                 LOCAL_CLOCK_OUTPUT_7_5MHZ               2
  77 #define                 LOCAL_CLOCK_OUTPUT_15MHZ                3
  78 #define                 LOCAL_CLOCK_OUTPUT_30MHZ                4
  79 #define                 LOCAL_CLOCK_OUTPUT_60MHZ                5
  80 #define         DMA_SPLIT_BUS_MODE                      4
  81 #define         BYTE_SWAP                               5
  82 #define         BUFFER_CONFIGURATION                    6
  83 #define                 BUFFER_CONFIGURATION_EPA512_EPB512      0
  84 #define                 BUFFER_CONFIGURATION_EPA1024_EPB512     1
  85 #define                 BUFFER_CONFIGURATION_EPA1024_EPB1024    2
  86 #define                 BUFFER_CONFIGURATION_EPA1024DB          3
  87 #define CHIPREV_LEGACY                  0x23
  88 #define                 NET2270_LEGACY_REV                      0x40
  89 #define LOCCTL1                         0x24
  90 #define         DMA_MODE                                0
  91 #define                 SLOW_DREQ                               0
  92 #define                 FAST_DREQ                               1
  93 #define                 BURST_MODE                              2
  94 #define         DMA_DACK_ENABLE                         2
  95 #define CHIPREV_2272                    0x25
  96 #define                 CHIPREV_NET2272_R1                      0x10
  97 #define                 CHIPREV_NET2272_R1A                     0x11
  98 /* USB Registers */
  99 #define USBCTL0                         0x18
 100 #define         IO_WAKEUP_ENABLE                        1
 101 #define         USB_DETECT_ENABLE                       3
 102 #define         USB_ROOT_PORT_WAKEUP_ENABLE             5
 103 #define USBCTL1                         0x19
 104 #define         VBUS_PIN                                0
 105 #define                 USB_FULL_SPEED                          1
 106 #define                 USB_HIGH_SPEED                          2
 107 #define         GENERATE_RESUME                         3
 108 #define         VIRTUAL_ENDPOINT_ENABLE                 4
 109 #define FRAME0                          0x1a
 110 #define FRAME1                          0x1b
 111 #define OURADDR                         0x30
 112 #define         FORCE_IMMEDIATE                         7
 113 #define USBDIAG                         0x31
 114 #define         FORCE_TRANSMIT_CRC_ERROR                0
 115 #define         PREVENT_TRANSMIT_BIT_STUFF              1
 116 #define         FORCE_RECEIVE_ERROR                     2
 117 #define         FAST_TIMES                              4
 118 #define USBTEST                         0x32
 119 #define         TEST_MODE_SELECT                        0
 120 #define                 NORMAL_OPERATION                        0
 121 #define                 TEST_J                                  1
 122 #define                 TEST_K                                  2
 123 #define                 TEST_SE0_NAK                            3
 124 #define                 TEST_PACKET                             4
 125 #define                 TEST_FORCE_ENABLE                       5
 126 #define XCVRDIAG                        0x33
 127 #define         FORCE_FULL_SPEED                        2
 128 #define         FORCE_HIGH_SPEED                        3
 129 #define         OPMODE                                  4
 130 #define                 NORMAL_OPERATION                        0
 131 #define                 NON_DRIVING                             1
 132 #define                 DISABLE_BITSTUFF_AND_NRZI_ENCODE        2
 133 #define         LINESTATE                               6
 134 #define                 SE0_STATE                               0
 135 #define                 J_STATE                                 1
 136 #define                 K_STATE                                 2
 137 #define                 SE1_STATE                               3
 138 #define VIRTOUT0                        0x34
 139 #define VIRTOUT1                        0x35
 140 #define VIRTIN0                         0x36
 141 #define VIRTIN1                         0x37
 142 #define SETUP0                          0x40
 143 #define SETUP1                          0x41
 144 #define SETUP2                          0x42
 145 #define SETUP3                          0x43
 146 #define SETUP4                          0x44
 147 #define SETUP5                          0x45
 148 #define SETUP6                          0x46
 149 #define SETUP7                          0x47
 150 /* Endpoint Registers (Paged via PAGESEL) */
 151 #define EP_DATA                         0x05
 152 #define EP_STAT0                        0x06
 153 #define         DATA_IN_TOKEN_INTERRUPT                 0
 154 #define         DATA_OUT_TOKEN_INTERRUPT                1
 155 #define         DATA_PACKET_TRANSMITTED_INTERRUPT       2
 156 #define         DATA_PACKET_RECEIVED_INTERRUPT          3
 157 #define         SHORT_PACKET_TRANSFERRED_INTERRUPT      4
 158 #define         NAK_OUT_PACKETS                         5
 159 #define         BUFFER_EMPTY                            6
 160 #define         BUFFER_FULL                             7
 161 #define EP_STAT1                        0x07
 162 #define         TIMEOUT                                 0
 163 #define         USB_OUT_ACK_SENT                        1
 164 #define         USB_OUT_NAK_SENT                        2
 165 #define         USB_IN_ACK_RCVD                         3
 166 #define         USB_IN_NAK_SENT                         4
 167 #define         USB_STALL_SENT                          5
 168 #define         LOCAL_OUT_ZLP                           6
 169 #define         BUFFER_FLUSH                            7
 170 #define EP_TRANSFER0                    0x08
 171 #define EP_TRANSFER1                    0x09
 172 #define EP_TRANSFER2                    0x0a
 173 #define EP_IRQENB                       0x0b
 174 #define         DATA_IN_TOKEN_INTERRUPT_ENABLE          0
 175 #define         DATA_OUT_TOKEN_INTERRUPT_ENABLE         1
 176 #define         DATA_PACKET_TRANSMITTED_INTERRUPT_ENABLE        2
 177 #define         DATA_PACKET_RECEIVED_INTERRUPT_ENABLE   3
 178 #define         SHORT_PACKET_TRANSFERRED_INTERRUPT_ENABLE       4
 179 #define EP_AVAIL0                       0x0c
 180 #define EP_AVAIL1                       0x0d
 181 #define EP_RSPCLR                       0x0e
 182 #define EP_RSPSET                       0x0f
 183 #define         ENDPOINT_HALT                           0
 184 #define         ENDPOINT_TOGGLE                         1
 185 #define         NAK_OUT_PACKETS_MODE                    2
 186 #define         CONTROL_STATUS_PHASE_HANDSHAKE          3
 187 #define         INTERRUPT_MODE                          4
 188 #define         AUTOVALIDATE                            5
 189 #define         HIDE_STATUS_PHASE                       6
 190 #define         ALT_NAK_OUT_PACKETS                     7
 191 #define EP_MAXPKT0                      0x28
 192 #define EP_MAXPKT1                      0x29
 193 #define         ADDITIONAL_TRANSACTION_OPPORTUNITIES    3
 194 #define                 NONE_ADDITIONAL_TRANSACTION             0
 195 #define                 ONE_ADDITIONAL_TRANSACTION              1
 196 #define                 TWO_ADDITIONAL_TRANSACTION              2
 197 #define EP_CFG                          0x2a
 198 #define         ENDPOINT_NUMBER                         0
 199 #define         ENDPOINT_DIRECTION                      4
 200 #define         ENDPOINT_TYPE                           5
 201 #define         ENDPOINT_ENABLE                         7
 202 #define EP_HBW                          0x2b
 203 #define         HIGH_BANDWIDTH_OUT_TRANSACTION_PID      0
 204 #define                 DATA0_PID                               0
 205 #define                 DATA1_PID                               1
 206 #define                 DATA2_PID                               2
 207 #define                 MDATA_PID                               3
 208 #define EP_BUFF_STATES                  0x2c
 209 #define         BUFFER_A_STATE                          0
 210 #define         BUFFER_B_STATE                          2
 211 #define                 BUFF_FREE                               0
 212 #define                 BUFF_VALID                              1
 213 #define                 BUFF_LCL                                2
 214 #define                 BUFF_USB                                3
 215
 216 /*---------------------------------------------------------------------------*/
 217
 218 #define PCI_DEVICE_ID_RDK1      0x9054
 219
 220 /* PCI-RDK EPLD Registers */
 221 #define RDK_EPLD_IO_REGISTER1           0x00000000
 222 #define         RDK_EPLD_USB_RESET                              0
 223 #define         RDK_EPLD_USB_POWERDOWN                          1
 224 #define         RDK_EPLD_USB_WAKEUP                             2
 225 #define         RDK_EPLD_USB_EOT                                3
 226 #define         RDK_EPLD_DPPULL                                 4
 227 #define RDK_EPLD_IO_REGISTER2           0x00000004
 228 #define         RDK_EPLD_BUSWIDTH                               0
 229 #define         RDK_EPLD_USER                                   2
 230 #define         RDK_EPLD_RESET_INTERRUPT_ENABLE                 3
 231 #define         RDK_EPLD_DMA_TIMEOUT_ENABLE                     4
 232 #define RDK_EPLD_STATUS_REGISTER        0x00000008
 233 #define         RDK_EPLD_USB_LRESET                             0
 234 #define RDK_EPLD_REVISION_REGISTER      0x0000000c
 235
 236 /* PCI-RDK PLX 9054 Registers */
 237 #define INTCSR                          0x68
 238 #define         PCI_INTERRUPT_ENABLE                            8
 239 #define         LOCAL_INTERRUPT_INPUT_ENABLE                    11
 240 #define         LOCAL_INPUT_INTERRUPT_ACTIVE                    15
 241 #define         LOCAL_DMA_CHANNEL_0_INTERRUPT_ENABLE            18
 242 #define         LOCAL_DMA_CHANNEL_1_INTERRUPT_ENABLE            19
 243 #define         DMA_CHANNEL_0_INTERRUPT_ACTIVE                  21
 244 #define         DMA_CHANNEL_1_INTERRUPT_ACTIVE                  22
 245 #define CNTRL                           0x6C
 246 #define         RELOAD_CONFIGURATION_REGISTERS                  29
 247 #define         PCI_ADAPTER_SOFTWARE_RESET                      30
 248 #define DMAMODE0                        0x80
 249 #define         LOCAL_BUS_WIDTH                                 0
 250 #define         INTERNAL_WAIT_STATES                            2
 251 #define         TA_READY_INPUT_ENABLE                           6
 252 #define         LOCAL_BURST_ENABLE                              8
 253 #define         SCATTER_GATHER_MODE                             9
 254 #define         DONE_INTERRUPT_ENABLE                           10
 255 #define         LOCAL_ADDRESSING_MODE                           11
 256 #define         DEMAND_MODE                                     12
 257 #define         DMA_EOT_ENABLE                                  14
 258 #define         FAST_SLOW_TERMINATE_MODE_SELECT                 15
 259 #define         DMA_CHANNEL_INTERRUPT_SELECT                    17
 260 #define DMAPADR0                        0x84
 261 #define DMALADR0                        0x88
 262 #define DMASIZ0                         0x8c
 263 #define DMADPR0                         0x90
 264 #define         DESCRIPTOR_LOCATION                             0
 265 #define         END_OF_CHAIN                                    1
 266 #define         INTERRUPT_AFTER_TERMINAL_COUNT                  2
 267 #define         DIRECTION_OF_TRANSFER                           3
 268 #define DMACSR0                         0xa8
 269 #define         CHANNEL_ENABLE                                  0
 270 #define         CHANNEL_START                                   1
 271 #define         CHANNEL_ABORT                                   2
 272 #define         CHANNEL_CLEAR_INTERRUPT                         3
 273 #define         CHANNEL_DONE                                    4
 274 #define DMATHR                          0xb0
 275 #define LBRD1                           0xf8
 276 #define         MEMORY_SPACE_LOCAL_BUS_WIDTH                    0
 277 #define         W8_BIT                                          0
 278 #define         W16_BIT                                         1
 279
 280 /* Special OR'ing of INTCSR bits */
 281 #define LOCAL_INTERRUPT_TEST \
 282         ((1 << LOCAL_INPUT_INTERRUPT_ACTIVE) | \
 283          (1 << LOCAL_INTERRUPT_INPUT_ENABLE))
 284
 285 #define DMA_CHANNEL_0_TEST \
 286         ((1 << DMA_CHANNEL_0_INTERRUPT_ACTIVE) | \
 287          (1 << LOCAL_DMA_CHANNEL_0_INTERRUPT_ENABLE))
 288
 289 #define DMA_CHANNEL_1_TEST \
 290         ((1 << DMA_CHANNEL_1_INTERRUPT_ACTIVE) | \
 291          (1 << LOCAL_DMA_CHANNEL_1_INTERRUPT_ENABLE))
 292
 293 /* EPLD Registers */
 294 #define RDK_EPLD_IO_REGISTER1                   0x00000000
 295 #define         RDK_EPLD_USB_RESET                      0
 296 #define         RDK_EPLD_USB_POWERDOWN                  1
 297 #define         RDK_EPLD_USB_WAKEUP                     2
 298 #define         RDK_EPLD_USB_EOT                        3
 299 #define         RDK_EPLD_DPPULL                         4
 300 #define RDK_EPLD_IO_REGISTER2                   0x00000004
 301 #define         RDK_EPLD_BUSWIDTH                       0
 302 #define         RDK_EPLD_USER                           2
 303 #define         RDK_EPLD_RESET_INTERRUPT_ENABLE         3
 304 #define         RDK_EPLD_DMA_TIMEOUT_ENABLE             4
 305 #define RDK_EPLD_STATUS_REGISTER                0x00000008
 306 #define RDK_EPLD_USB_LRESET                             0
 307 #define RDK_EPLD_REVISION_REGISTER              0x0000000c
 308
 309 #define EPLD_IO_CONTROL_REGISTER                0x400
 310 #define         NET2272_RESET                           0
 311 #define         BUSWIDTH                                1
 312 #define         MPX_MODE                                3
 313 #define         USER                                    4
 314 #define         DMA_TIMEOUT_ENABLE                      5
 315 #define         DMA_CTL_DACK                            6
 316 #define         EPLD_DMA_ENABLE                         7
 317 #define EPLD_DMA_CONTROL_REGISTER               0x800
 318 #define         SPLIT_DMA_MODE                          0
 319 #define         SPLIT_DMA_DIRECTION                     1
 320 #define         SPLIT_DMA_ENABLE                        2
 321 #define         SPLIT_DMA_INTERRUPT_ENABLE              3
 322 #define         SPLIT_DMA_INTERRUPT                     4
 323 #define         EPLD_DMA_MODE                           5
 324 #define         EPLD_DMA_CONTROLLER_ENABLE              7
 325 #define SPLIT_DMA_ADDRESS_LOW                   0xc00
 326 #define SPLIT_DMA_ADDRESS_HIGH                  0x1000
 327 #define SPLIT_DMA_BYTE_COUNT_LOW                0x1400
 328 #define SPLIT_DMA_BYTE_COUNT_HIGH               0x1800
 329 #define EPLD_REVISION_REGISTER                  0x1c00
 330 #define SPLIT_DMA_RAM                           0x4000
 331 #define DMA_RAM_SIZE                            0x1000
 332
 333 /*---------------------------------------------------------------------------*/
 334
 335 #define PCI_DEVICE_ID_RDK2      0x3272
 336
 337 /* PCI-RDK version 2 registers */
 338
 339 /* Main Control Registers */
 340
 341 #define RDK2_IRQENB                     0x00
 342 #define RDK2_IRQSTAT                    0x04
 343 #define         PB7                             23
 344 #define         PB6                             22
 345 #define         PB5                             21
 346 #define         PB4                             20
 347 #define         PB3                             19
 348 #define         PB2                             18
 349 #define         PB1                             17
 350 #define         PB0                             16
 351 #define         GP3                             23
 352 #define         GP2                             23
 353 #define         GP1                             23
 354 #define         GP0                             23
 355 #define         DMA_RETRY_ABORT                 6
 356 #define         DMA_PAUSE_DONE                  5
 357 #define         DMA_ABORT_DONE                  4
 358 #define         DMA_OUT_FIFO_TRANSFER_DONE      3
 359 #define         DMA_LOCAL_DONE                  2
 360 #define         DMA_PCI_DONE                    1
 361 #define         NET2272_PCI_IRQ                 0
 362
 363 #define RDK2_LOCCTLRDK                  0x08
 364 #define         CHIP_RESET                      3
 365 #define         SPLIT_DMA                       2
 366 #define         MULTIPLEX_MODE                  1
 367 #define         BUS_WIDTH                       0
 368
 369 #define RDK2_GPIOCTL                    0x10
 370 #define         GP3_OUT_ENABLE                                  7
 371 #define         GP2_OUT_ENABLE                                  6
 372 #define         GP1_OUT_ENABLE                                  5
 373 #define         GP0_OUT_ENABLE                                  4
 374 #define         GP3_DATA                                        3
 375 #define         GP2_DATA                                        2
 376 #define         GP1_DATA                                        1
 377 #define         GP0_DATA                                        0
 378
 379 #define RDK2_LEDSW                      0x14
 380 #define         LED3                            27
 381 #define         LED2                            26
 382 #define         LED1                            25
 383 #define         LED0                            24
 384 #define         PBUTTON                         16
 385 #define         DIPSW                           0
 386
 387 #define RDK2_DIAG                       0x18
 388 #define         RDK2_FAST_TIMES                         2
 389 #define         FORCE_PCI_SERR                          1
 390 #define         FORCE_PCI_INT                           0
 391 #define RDK2_FPGAREV                    0x1C
 392
 393 /* Dma Control registers */
 394 #define RDK2_DMACTL                     0x80
 395 #define         ADDR_HOLD                               24
 396 #define         RETRY_COUNT                             16      /* 23:16 */
 397 #define         FIFO_THRESHOLD                          11      /* 15:11 */
 398 #define         MEM_WRITE_INVALIDATE                    10
 399 #define         READ_MULTIPLE                           9
 400 #define         READ_LINE                               8
 401 #define         RDK2_DMA_MODE                           6       /* 7:6 */
 402 #define         CONTROL_DACK                            5
 403 #define         EOT_ENABLE                              4
 404 #define         EOT_POLARITY                            3
 405 #define         DACK_POLARITY                           2
 406 #define         DREQ_POLARITY                           1
 407 #define         DMA_ENABLE                              0
 408
 409 #define RDK2_DMASTAT                    0x84
 410 #define         GATHER_COUNT                            12      /* 14:12 */
 411 #define         FIFO_COUNT                              6       /* 11:6 */
 412 #define         FIFO_FLUSH                              5
 413 #define         FIFO_TRANSFER                           4
 414 #define         PAUSE_DONE                              3
 415 #define         ABORT_DONE                              2
 416 #define         DMA_ABORT                               1
 417 #define         DMA_START                               0
 418
 419 #define RDK2_DMAPCICOUNT                0x88
 420 #define         DMA_DIRECTION                           31
 421 #define         DMA_PCI_BYTE_COUNT                      0       /* 0:23 */
 422
 423 #define RDK2_DMALOCCOUNT                0x8C    /* 0:23 dma local byte count */
 424
 425 #define RDK2_DMAADDR                    0x90    /* 2:31 PCI bus starting address */
 426
 427 /*---------------------------------------------------------------------------*/
 428
 429 #define REG_INDEXED_THRESHOLD   (1 << 5)
 430
 431 /* DRIVER DATA STRUCTURES and UTILITIES */
 432 struct net2272_ep {
 433         struct usb_ep ep;
 434         struct net2272 *dev;
 435         unsigned long irqs;
 436
 437         /* analogous to a host-side qh */
 438         struct list_head queue;
 439         const struct usb_endpoint_descriptor *desc;
 440         unsigned num:8,
 441                  fifo_size:12,
 442                  stopped:1,
 443                  wedged:1,
 444                  is_in:1,
 445                  is_iso:1,
 446                  dma:1,
 447                  not_empty:1;
 448 };
 449
 450 struct net2272 {
 451         /* each device provides one gadget, several endpoints */
 452         struct usb_gadget gadget;
 453         struct device *dev;
 454         unsigned short dev_id;
 455
 456         spinlock_t lock;
 457         struct net2272_ep ep[4];
 458         struct usb_gadget_driver *driver;
 459         unsigned protocol_stall:1,
 460                  softconnect:1,
 461                  is_selfpowered:1,
 462                  wakeup:1,
 463                  dma_eot_polarity:1,
 464                  dma_dack_polarity:1,
 465                  dma_dreq_polarity:1,
 466                  dma_busy:1;
 467         u16 chiprev;
 468         u8 pagesel;
 469
 470         unsigned int irq;
 471         unsigned short fifo_mode;
 472
 473         unsigned int base_shift;
 474         u16 __iomem *base_addr;
 475         union {
 476 #ifdef CONFIG_PCI
 477                 struct {
 478                         void __iomem *plx9054_base_addr;
 479                         void __iomem *epld_base_addr;
 480                 } rdk1;
 481                 struct {
 482                         /* Bar0, Bar1 is base_addr both mem-mapped */
 483                         void __iomem *fpga_base_addr;
 484                 } rdk2;
 485 #endif
 486         };
 487 };
 488
 489 static void __iomem *
 490 net2272_reg_addr(struct net2272 *dev, unsigned int reg)
 491 {
 492         return dev->base_addr + (reg << dev->base_shift);
 493 }
 494
 495 static void
 496 net2272_write(struct net2272 *dev, unsigned int reg, u8 value)
 497 {
 498         if (reg >= REG_INDEXED_THRESHOLD) {
 499                 /*
 500                  * Indexed register; use REGADDRPTR/REGDATA
 501                  *  - Save and restore REGADDRPTR. This prevents REGADDRPTR from
 502                  *    changes between other code sections, but it is time consuming.
 503                  *  - Performance tips: either do not save and restore REGADDRPTR (if it
 504                  *    is safe) or do save/restore operations only in critical sections.
 505                 u8 tmp = readb(dev->base_addr + REGADDRPTR);
 506                  */
 507                 writeb((u8)reg, net2272_reg_addr(dev, REGADDRPTR));
 508                 writeb(value, net2272_reg_addr(dev, REGDATA));
 509                 /* writeb(tmp, net2272_reg_addr(dev, REGADDRPTR)); */
 510         } else
 511                 writeb(value, net2272_reg_addr(dev, reg));
 512 }
 513
 514 static u8
 515 net2272_read(struct net2272 *dev, unsigned int reg)
 516 {
 517         u8 ret;
 518
 519         if (reg >= REG_INDEXED_THRESHOLD) {
 520                 /*
 521                  * Indexed register; use REGADDRPTR/REGDATA
 522                  *  - Save and restore REGADDRPTR. This prevents REGADDRPTR from
 523                  *    changes between other code sections, but it is time consuming.
 524                  *  - Performance tips: either do not save and restore REGADDRPTR (if it
 525                  *    is safe) or do save/restore operations only in critical sections.
 526                 u8 tmp = readb(dev->base_addr + REGADDRPTR);
 527                  */
 528                 writeb((u8)reg, net2272_reg_addr(dev, REGADDRPTR));
 529                 ret = readb(net2272_reg_addr(dev, REGDATA));
 530                 /* writeb(tmp, net2272_reg_addr(dev, REGADDRPTR)); */
 531         } else
 532                 ret = readb(net2272_reg_addr(dev, reg));
 533
 534         return ret;
 535 }
 536
 537 static void
 538 net2272_ep_write(struct net2272_ep *ep, unsigned int reg, u8 value)
 539 {
 540         struct net2272 *dev = ep->dev;
 541
 542         if (dev->pagesel != ep->num) {
 543                 net2272_write(dev, PAGESEL, ep->num);
 544                 dev->pagesel = ep->num;
 545         }
 546         net2272_write(dev, reg, value);
 547 }
 548
 549 static u8
 550 net2272_ep_read(struct net2272_ep *ep, unsigned int reg)
 551 {
 552         struct net2272 *dev = ep->dev;
 553
 554         if (dev->pagesel != ep->num) {
 555                 net2272_write(dev, PAGESEL, ep->num);
 556                 dev->pagesel = ep->num;
 557         }
 558         return net2272_read(dev, reg);
 559 }
 560
 561 static void allow_status(struct net2272_ep *ep)
 562 {
 563         /* ep0 only */
 564         net2272_ep_write(ep, EP_RSPCLR,
 565                 (1 << CONTROL_STATUS_PHASE_HANDSHAKE) |
 566                 (1 << ALT_NAK_OUT_PACKETS) |
 567                 (1 << NAK_OUT_PACKETS_MODE));
 568         ep->stopped = 1;
 569 }
 570
 571 static void set_halt(struct net2272_ep *ep)
 572 {
 573         /* ep0 and bulk/intr endpoints */
 574         net2272_ep_write(ep, EP_RSPCLR, 1 << CONTROL_STATUS_PHASE_HANDSHAKE);
 575         net2272_ep_write(ep, EP_RSPSET, 1 << ENDPOINT_HALT);
 576 }
 577
 578 static void clear_halt(struct net2272_ep *ep)
 579 {
 580         /* ep0 and bulk/intr endpoints */
 581         net2272_ep_write(ep, EP_RSPCLR,
 582                 (1 << ENDPOINT_HALT) | (1 << ENDPOINT_TOGGLE));
 583 }
 584
 585 /* count (<= 4) bytes in the next fifo write will be valid */
 586 static void set_fifo_bytecount(struct net2272_ep *ep, unsigned count)
 587 {
 588         /* net2272_ep_write will truncate to u8 for us */
 589         net2272_ep_write(ep, EP_TRANSFER2, count >> 16);
 590         net2272_ep_write(ep, EP_TRANSFER1, count >> 8);
 591         net2272_ep_write(ep, EP_TRANSFER0, count);
 592 }
 593
 594 struct net2272_request {
 595         struct usb_request req;
 596         struct list_head queue;
 597         unsigned mapped:1,
 598                  valid:1;
 599 };
 600
 601 #endif