drivers/usb/gadget/fsl_mxc_udc.c

   1 /*
   2  * Copyright (C) 2009
   3  * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
   4  *
   5  * Description:
   6  * Helper routines for i.MX3x SoCs from Freescale, needed by the fsl_usb2_udc.c
   7  * driver to function correctly on these systems.
   8  *
   9  * This program is free software; you can redistribute  it and/or modify it
  10  * under  the terms of  the GNU General  Public License as published by the
  11  * Free Software Foundation;  either version 2 of the  License, or (at your
  12  * option) any later version.
  13  */
  14 #include <linux/clk.h>
  15 #include <linux/delay.h>
  16 #include <linux/err.h>
  17 #include <linux/fsl_devices.h>
  18 #include <linux/platform_device.h>
  19 #include <linux/io.h>
  20
  21 #include <mach/hardware.h>
  22
  23 static struct clk *mxc_ahb_clk;
  24 static struct clk *mxc_usb_clk;
  25
  26 /* workaround ENGcm09152 for i.MX35 */
  27 #define USBPHYCTRL_OTGBASE_OFFSET       0x608
  28 #define USBPHYCTRL_EVDO                 (1 << 23)
  29
  30 int fsl_udc_clk_init(struct platform_device *pdev)
  31 {
  32         struct fsl_usb2_platform_data *pdata;
  33         unsigned long freq;
  34         int ret;
  35
  36         pdata = pdev->dev.platform_data;
  37
  38         if (!cpu_is_mx35() && !cpu_is_mx25()) {
  39                 mxc_ahb_clk = clk_get(&pdev->dev, "usb_ahb");
  40                 if (IS_ERR(mxc_ahb_clk))
  41                         return PTR_ERR(mxc_ahb_clk);
  42
  43                 ret = clk_enable(mxc_ahb_clk);
  44                 if (ret < 0) {
  45                         dev_err(&pdev->dev, "clk_enable(\"usb_ahb\") failed\n");
  46                         goto eenahb;
  47                 }
  48         }
  49
  50         /* make sure USB_CLK is running at 60 MHz +/- 1000 Hz */
  51         mxc_usb_clk = clk_get(&pdev->dev, "usb");
  52         if (IS_ERR(mxc_usb_clk)) {
  53                 dev_err(&pdev->dev, "clk_get(\"usb\") failed\n");
  54                 ret = PTR_ERR(mxc_usb_clk);
  55                 goto egusb;
  56         }
  57
  58         if (!cpu_is_mx51()) {
  59                 freq = clk_get_rate(mxc_usb_clk);
  60                 if (pdata->phy_mode != FSL_USB2_PHY_ULPI &&
  61                     (freq < 59999000 || freq > 60001000)) {
  62                         dev_err(&pdev->dev, "USB_CLK=%lu, should be 60MHz\n", freq);
  63                         ret = -EINVAL;
  64                         goto eclkrate;
  65                 }
  66         }
  67
  68         ret = clk_enable(mxc_usb_clk);
  69         if (ret < 0) {
  70                 dev_err(&pdev->dev, "clk_enable(\"usb_clk\") failed\n");
  71                 goto eenusb;
  72         }
  73
  74         return 0;
  75
  76 eenusb:
  77 eclkrate:
  78         clk_put(mxc_usb_clk);
  79         mxc_usb_clk = NULL;
  80 egusb:
  81         if (!cpu_is_mx35())
  82                 clk_disable(mxc_ahb_clk);
  83 eenahb:
  84         if (!cpu_is_mx35())
  85                 clk_put(mxc_ahb_clk);
  86         return ret;
  87 }
  88
  89 void fsl_udc_clk_finalize(struct platform_device *pdev)
  90 {
  91         struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
  92         if (cpu_is_mx35()) {
  93                 unsigned int v;
  94
  95                 /* workaround ENGcm09152 for i.MX35 */
  96                 if (pdata->workaround & FLS_USB2_WORKAROUND_ENGCM09152) {
  97                         v = readl(MX35_IO_ADDRESS(MX35_USB_BASE_ADDR +
  98                                         USBPHYCTRL_OTGBASE_OFFSET));
  99                         writel(v | USBPHYCTRL_EVDO,
 100                                 MX35_IO_ADDRESS(MX35_USB_BASE_ADDR +
 101                                         USBPHYCTRL_OTGBASE_OFFSET));
 102                 }
 103         }
 104
 105         /* ULPI transceivers don't need usbpll */
 106         if (pdata->phy_mode == FSL_USB2_PHY_ULPI) {
 107                 clk_disable(mxc_usb_clk);
 108                 clk_put(mxc_usb_clk);
 109                 mxc_usb_clk = NULL;
 110         }
 111 }
 112
 113 void fsl_udc_clk_release(void)
 114 {
 115         if (mxc_usb_clk) {
 116                 clk_disable(mxc_usb_clk);
 117                 clk_put(mxc_usb_clk);
 118         }
 119         if (!cpu_is_mx35()) {
 120                 clk_disable(mxc_ahb_clk);
 121                 clk_put(mxc_ahb_clk);
 122         }
 123 }