drivers/tty/serial/pnx8xxx_uart.c

   1 /*
   2  * UART driver for PNX8XXX SoCs
   3  *
   4  * Author: Per Hallsmark per.hallsmark@mvista.com
   5  * Ported to 2.6 kernel by EmbeddedAlley
   6  * Reworked by Vitaly Wool <vitalywool@gmail.com>
   7  *
   8  * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
   9  * Copyright (C) 2000 Deep Blue Solutions Ltd.
  10  *
  11  * This file is licensed under the terms of the GNU General Public License
  12  * version 2. This program is licensed "as is" without any warranty of
  13  * any kind, whether express or implied.
  14  *
  15  */
  16
  17 #if defined(CONFIG_SERIAL_PNX8XXX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
  18 #define SUPPORT_SYSRQ
  19 #endif
  20
  21 #include <linux/module.h>
  22 #include <linux/ioport.h>
  23 #include <linux/init.h>
  24 #include <linux/console.h>
  25 #include <linux/sysrq.h>
  26 #include <linux/device.h>
  27 #include <linux/platform_device.h>
  28 #include <linux/tty.h>
  29 #include <linux/tty_flip.h>
  30 #include <linux/serial_core.h>
  31 #include <linux/serial.h>
  32 #include <linux/serial_pnx8xxx.h>
  33
  34 #include <asm/io.h>
  35 #include <asm/irq.h>
  36
  37 /* We'll be using StrongARM sa1100 serial port major/minor */
  38 #define SERIAL_PNX8XXX_MAJOR    204
  39 #define MINOR_START             5
  40
  41 #define NR_PORTS                2
  42
  43 #define PNX8XXX_ISR_PASS_LIMIT  256
  44
  45 /*
  46  * Convert from ignore_status_mask or read_status_mask to FIFO
  47  * and interrupt status bits
  48  */
  49 #define SM_TO_FIFO(x)   ((x) >> 10)
  50 #define SM_TO_ISTAT(x)  ((x) & 0x000001ff)
  51 #define FIFO_TO_SM(x)   ((x) << 10)
  52 #define ISTAT_TO_SM(x)  ((x) & 0x000001ff)
  53
  54 /*
  55  * This is the size of our serial port register set.
  56  */
  57 #define UART_PORT_SIZE  0x1000
  58
  59 /*
  60  * This determines how often we check the modem status signals
  61  * for any change.  They generally aren't connected to an IRQ
  62  * so we have to poll them.  We also check immediately before
  63  * filling the TX fifo incase CTS has been dropped.
  64  */
  65 #define MCTRL_TIMEOUT   (250*HZ/1000)
  66
  67 extern struct pnx8xxx_port pnx8xxx_ports[];
  68
  69 static inline int serial_in(struct pnx8xxx_port *sport, int offset)
  70 {
  71         return (__raw_readl(sport->port.membase + offset));
  72 }
  73
  74 static inline void serial_out(struct pnx8xxx_port *sport, int offset, int value)
  75 {
  76         __raw_writel(value, sport->port.membase + offset);
  77 }
  78
  79 /*
  80  * Handle any change of modem status signal since we were last called.
  81  */
  82 static void pnx8xxx_mctrl_check(struct pnx8xxx_port *sport)
  83 {
  84         unsigned int status, changed;
  85
  86         status = sport->port.ops->get_mctrl(&sport->port);
  87         changed = status ^ sport->old_status;
  88
  89         if (changed == 0)
  90                 return;
  91
  92         sport->old_status = status;
  93
  94         if (changed & TIOCM_RI)
  95                 sport->port.icount.rng++;
  96         if (changed & TIOCM_DSR)
  97                 sport->port.icount.dsr++;
  98         if (changed & TIOCM_CAR)
  99                 uart_handle_dcd_change(&sport->port, status & TIOCM_CAR);
 100         if (changed & TIOCM_CTS)
 101                 uart_handle_cts_change(&sport->port, status & TIOCM_CTS);
 102
 103         wake_up_interruptible(&sport->port.state->port.delta_msr_wait);
 104 }
 105
 106 /*
 107  * This is our per-port timeout handler, for checking the
 108  * modem status signals.
 109  */
 110 static void pnx8xxx_timeout(unsigned long data)
 111 {
 112         struct pnx8xxx_port *sport = (struct pnx8xxx_port *)data;
 113         unsigned long flags;
 114
 115         if (sport->port.state) {
 116                 spin_lock_irqsave(&sport->port.lock, flags);
 117                 pnx8xxx_mctrl_check(sport);
 118                 spin_unlock_irqrestore(&sport->port.lock, flags);
 119
 120                 mod_timer(&sport->timer, jiffies + MCTRL_TIMEOUT);
 121         }
 122 }
 123
 124 /*
 125  * interrupts disabled on entry
 126  */
 127 static void pnx8xxx_stop_tx(struct uart_port *port)
 128 {
 129         struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port;
 130         u32 ien;
 131
 132         /* Disable TX intr */
 133         ien = serial_in(sport, PNX8XXX_IEN);
 134         serial_out(sport, PNX8XXX_IEN, ien & ~PNX8XXX_UART_INT_ALLTX);
 135
 136         /* Clear all pending TX intr */
 137         serial_out(sport, PNX8XXX_ICLR, PNX8XXX_UART_INT_ALLTX);
 138 }
 139
 140 /*
 141  * interrupts may not be disabled on entry
 142  */
 143 static void pnx8xxx_start_tx(struct uart_port *port)
 144 {
 145         struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port;
 146         u32 ien;
 147
 148         /* Clear all pending TX intr */
 149         serial_out(sport, PNX8XXX_ICLR, PNX8XXX_UART_INT_ALLTX);
 150
 151         /* Enable TX intr */
 152         ien = serial_in(sport, PNX8XXX_IEN);
 153         serial_out(sport, PNX8XXX_IEN, ien | PNX8XXX_UART_INT_ALLTX);
 154 }
 155
 156 /*
 157  * Interrupts enabled
 158  */
 159 static void pnx8xxx_stop_rx(struct uart_port *port)
 160 {
 161         struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port;
 162         u32 ien;
 163
 164         /* Disable RX intr */
 165         ien = serial_in(sport, PNX8XXX_IEN);
 166         serial_out(sport, PNX8XXX_IEN, ien & ~PNX8XXX_UART_INT_ALLRX);
 167
 168         /* Clear all pending RX intr */
 169         serial_out(sport, PNX8XXX_ICLR, PNX8XXX_UART_INT_ALLRX);
 170 }
 171
 172 /*
 173  * Set the modem control timer to fire immediately.
 174  */
 175 static void pnx8xxx_enable_ms(struct uart_port *port)
 176 {
 177         struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port;
 178
 179         mod_timer(&sport->timer, jiffies);
 180 }
 181
 182 static void pnx8xxx_rx_chars(struct pnx8xxx_port *sport)
 183 {
 184         struct tty_struct *tty = sport->port.state->port.tty;
 185         unsigned int status, ch, flg;
 186
 187         status = FIFO_TO_SM(serial_in(sport, PNX8XXX_FIFO)) |
 188                  ISTAT_TO_SM(serial_in(sport, PNX8XXX_ISTAT));
 189         while (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFIFO)) {
 190                 ch = serial_in(sport, PNX8XXX_FIFO) & 0xff;
 191
 192                 sport->port.icount.rx++;
 193
 194                 flg = TTY_NORMAL;
 195
 196                 /*
 197                  * note that the error handling code is
 198                  * out of the main execution path
 199                  */
 200                 if (status & (FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE |
 201                                         PNX8XXX_UART_FIFO_RXPAR |
 202                                         PNX8XXX_UART_FIFO_RXBRK) |
 203                               ISTAT_TO_SM(PNX8XXX_UART_INT_RXOVRN))) {
 204                         if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXBRK)) {
 205                                 status &= ~(FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE) |
 206                                         FIFO_TO_SM(PNX8XXX_UART_FIFO_RXPAR));
 207                                 sport->port.icount.brk++;
 208                                 if (uart_handle_break(&sport->port))
 209                                         goto ignore_char;
 210                         } else if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXPAR))
 211                                 sport->port.icount.parity++;
 212                         else if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE))
 213                                 sport->port.icount.frame++;
 214                         if (status & ISTAT_TO_SM(PNX8XXX_UART_INT_RXOVRN))
 215                                 sport->port.icount.overrun++;
 216
 217                         status &= sport->port.read_status_mask;
 218
 219                         if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXPAR))
 220                                 flg = TTY_PARITY;
 221                         else if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE))
 222                                 flg = TTY_FRAME;
 223
 224 #ifdef SUPPORT_SYSRQ
 225                         sport->port.sysrq = 0;
 226 #endif
 227                 }
 228
 229                 if (uart_handle_sysrq_char(&sport->port, ch))
 230                         goto ignore_char;
 231
 232                 uart_insert_char(&sport->port, status,
 233                                 ISTAT_TO_SM(PNX8XXX_UART_INT_RXOVRN), ch, flg);
 234
 235         ignore_char:
 236                 serial_out(sport, PNX8XXX_LCR, serial_in(sport, PNX8XXX_LCR) |
 237                                 PNX8XXX_UART_LCR_RX_NEXT);
 238                 status = FIFO_TO_SM(serial_in(sport, PNX8XXX_FIFO)) |
 239                          ISTAT_TO_SM(serial_in(sport, PNX8XXX_ISTAT));
 240         }
 241         tty_flip_buffer_push(tty);
 242 }
 243
 244 static void pnx8xxx_tx_chars(struct pnx8xxx_port *sport)
 245 {
 246         struct circ_buf *xmit = &sport->port.state->xmit;
 247
 248         if (sport->port.x_char) {
 249                 serial_out(sport, PNX8XXX_FIFO, sport->port.x_char);
 250                 sport->port.icount.tx++;
 251                 sport->port.x_char = 0;
 252                 return;
 253         }
 254
 255         /*
 256          * Check the modem control lines before
 257          * transmitting anything.
 258          */
 259         pnx8xxx_mctrl_check(sport);
 260
 261         if (uart_circ_empty(xmit) || uart_tx_stopped(&sport->port)) {
 262                 pnx8xxx_stop_tx(&sport->port);
 263                 return;
 264         }
 265
 266         /*
 267          * TX while bytes available
 268          */
 269         while (((serial_in(sport, PNX8XXX_FIFO) &
 270                                         PNX8XXX_UART_FIFO_TXFIFO) >> 16) < 16) {
 271                 serial_out(sport, PNX8XXX_FIFO, xmit->buf[xmit->tail]);
 272                 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
 273                 sport->port.icount.tx++;
 274                 if (uart_circ_empty(xmit))
 275                         break;
 276         }
 277
 278         if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
 279                 uart_write_wakeup(&sport->port);
 280
 281         if (uart_circ_empty(xmit))
 282                 pnx8xxx_stop_tx(&sport->port);
 283 }
 284
 285 static irqreturn_t pnx8xxx_int(int irq, void *dev_id)
 286 {
 287         struct pnx8xxx_port *sport = dev_id;
 288         unsigned int status;
 289
 290         spin_lock(&sport->port.lock);
 291         /* Get the interrupts */
 292         status  = serial_in(sport, PNX8XXX_ISTAT) & serial_in(sport, PNX8XXX_IEN);
 293
 294         /* Byte or break signal received */
 295         if (status & (PNX8XXX_UART_INT_RX | PNX8XXX_UART_INT_BREAK))
 296                 pnx8xxx_rx_chars(sport);
 297
 298         /* TX holding register empty - transmit a byte */
 299         if (status & PNX8XXX_UART_INT_TX)
 300                 pnx8xxx_tx_chars(sport);
 301
 302         /* Clear the ISTAT register */
 303         serial_out(sport, PNX8XXX_ICLR, status);
 304
 305         spin_unlock(&sport->port.lock);
 306         return IRQ_HANDLED;
 307 }
 308
 309 /*
 310  * Return TIOCSER_TEMT when transmitter is not busy.
 311  */
 312 static unsigned int pnx8xxx_tx_empty(struct uart_port *port)
 313 {
 314         struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port;
 315
 316         return serial_in(sport, PNX8XXX_FIFO) & PNX8XXX_UART_FIFO_TXFIFO_STA ? 0 : TIOCSER_TEMT;
 317 }
 318
 319 static unsigned int pnx8xxx_get_mctrl(struct uart_port *port)
 320 {
 321         struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port;
 322         unsigned int mctrl = TIOCM_DSR;
 323         unsigned int msr;
 324
 325         /* REVISIT */
 326
 327         msr = serial_in(sport, PNX8XXX_MCR);
 328
 329         mctrl |= msr & PNX8XXX_UART_MCR_CTS ? TIOCM_CTS : 0;
 330         mctrl |= msr & PNX8XXX_UART_MCR_DCD ? TIOCM_CAR : 0;
 331
 332         return mctrl;
 333 }
 334
 335 static void pnx8xxx_set_mctrl(struct uart_port *port, unsigned int mctrl)
 336 {
 337 #if     0       /* FIXME */
 338         struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port;
 339         unsigned int msr;
 340 #endif
 341 }
 342
 343 /*
 344  * Interrupts always disabled.
 345  */
 346 static void pnx8xxx_break_ctl(struct uart_port *port, int break_state)
 347 {
 348         struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port;
 349         unsigned long flags;
 350         unsigned int lcr;
 351
 352         spin_lock_irqsave(&sport->port.lock, flags);
 353         lcr = serial_in(sport, PNX8XXX_LCR);
 354         if (break_state == -1)
 355                 lcr |= PNX8XXX_UART_LCR_TXBREAK;
 356         else
 357                 lcr &= ~PNX8XXX_UART_LCR_TXBREAK;
 358         serial_out(sport, PNX8XXX_LCR, lcr);
 359         spin_unlock_irqrestore(&sport->port.lock, flags);
 360 }
 361
 362 static int pnx8xxx_startup(struct uart_port *port)
 363 {
 364         struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port;
 365         int retval;
 366
 367         /*
 368          * Allocate the IRQ
 369          */
 370         retval = request_irq(sport->port.irq, pnx8xxx_int, 0,
 371                              "pnx8xxx-uart", sport);
 372         if (retval)
 373                 return retval;
 374
 375         /*
 376          * Finally, clear and enable interrupts
 377          */
 378
 379         serial_out(sport, PNX8XXX_ICLR, PNX8XXX_UART_INT_ALLRX |
 380                              PNX8XXX_UART_INT_ALLTX);
 381
 382         serial_out(sport, PNX8XXX_IEN, serial_in(sport, PNX8XXX_IEN) |
 383                             PNX8XXX_UART_INT_ALLRX |
 384                             PNX8XXX_UART_INT_ALLTX);
 385
 386         /*
 387          * Enable modem status interrupts
 388          */
 389         spin_lock_irq(&sport->port.lock);
 390         pnx8xxx_enable_ms(&sport->port);
 391         spin_unlock_irq(&sport->port.lock);
 392
 393         return 0;
 394 }
 395
 396 static void pnx8xxx_shutdown(struct uart_port *port)
 397 {
 398         struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port;
 399         int lcr;
 400
 401         /*
 402          * Stop our timer.
 403          */
 404         del_timer_sync(&sport->timer);
 405
 406         /*
 407          * Disable all interrupts
 408          */
 409         serial_out(sport, PNX8XXX_IEN, 0);
 410
 411         /*
 412          * Reset the Tx and Rx FIFOS, disable the break condition
 413          */
 414         lcr = serial_in(sport, PNX8XXX_LCR);
 415         lcr &= ~PNX8XXX_UART_LCR_TXBREAK;
 416         lcr |= PNX8XXX_UART_LCR_TX_RST | PNX8XXX_UART_LCR_RX_RST;
 417         serial_out(sport, PNX8XXX_LCR, lcr);
 418
 419         /*
 420          * Clear all interrupts
 421          */
 422         serial_out(sport, PNX8XXX_ICLR, PNX8XXX_UART_INT_ALLRX |
 423                              PNX8XXX_UART_INT_ALLTX);
 424
 425         /*
 426          * Free the interrupt
 427          */
 428         free_irq(sport->port.irq, sport);
 429 }
 430
 431 static void
 432 pnx8xxx_set_termios(struct uart_port *port, struct ktermios *termios,
 433                    struct ktermios *old)
 434 {
 435         struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port;
 436         unsigned long flags;
 437         unsigned int lcr_fcr, old_ien, baud, quot;
 438         unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8;
 439
 440         /*
 441          * We only support CS7 and CS8.
 442          */
 443         while ((termios->c_cflag & CSIZE) != CS7 &&
 444                (termios->c_cflag & CSIZE) != CS8) {
 445                 termios->c_cflag &= ~CSIZE;
 446                 termios->c_cflag |= old_csize;
 447                 old_csize = CS8;
 448         }
 449
 450         if ((termios->c_cflag & CSIZE) == CS8)
 451                 lcr_fcr = PNX8XXX_UART_LCR_8BIT;
 452         else
 453                 lcr_fcr = 0;
 454
 455         if (termios->c_cflag & CSTOPB)
 456                 lcr_fcr |= PNX8XXX_UART_LCR_2STOPB;
 457         if (termios->c_cflag & PARENB) {
 458                 lcr_fcr |= PNX8XXX_UART_LCR_PAREN;
 459                 if (!(termios->c_cflag & PARODD))
 460                         lcr_fcr |= PNX8XXX_UART_LCR_PAREVN;
 461         }
 462
 463         /*
 464          * Ask the core to calculate the divisor for us.
 465          */
 466         baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
 467         quot = uart_get_divisor(port, baud);
 468
 469         spin_lock_irqsave(&sport->port.lock, flags);
 470
 471         sport->port.read_status_mask = ISTAT_TO_SM(PNX8XXX_UART_INT_RXOVRN) |
 472                                 ISTAT_TO_SM(PNX8XXX_UART_INT_EMPTY) |
 473                                 ISTAT_TO_SM(PNX8XXX_UART_INT_RX);
 474         if (termios->c_iflag & INPCK)
 475                 sport->port.read_status_mask |=
 476                         FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE) |
 477                         FIFO_TO_SM(PNX8XXX_UART_FIFO_RXPAR);
 478         if (termios->c_iflag & (BRKINT | PARMRK))
 479                 sport->port.read_status_mask |=
 480                         ISTAT_TO_SM(PNX8XXX_UART_INT_BREAK);
 481
 482         /*
 483          * Characters to ignore
 484          */
 485         sport->port.ignore_status_mask = 0;
 486         if (termios->c_iflag & IGNPAR)
 487                 sport->port.ignore_status_mask |=
 488                         FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE) |
 489                         FIFO_TO_SM(PNX8XXX_UART_FIFO_RXPAR);
 490         if (termios->c_iflag & IGNBRK) {
 491                 sport->port.ignore_status_mask |=
 492                         ISTAT_TO_SM(PNX8XXX_UART_INT_BREAK);
 493                 /*
 494                  * If we're ignoring parity and break indicators,
 495                  * ignore overruns too (for real raw support).
 496                  */
 497                 if (termios->c_iflag & IGNPAR)
 498                         sport->port.ignore_status_mask |=
 499                                 ISTAT_TO_SM(PNX8XXX_UART_INT_RXOVRN);
 500         }
 501
 502         /*
 503          * ignore all characters if CREAD is not set
 504          */
 505         if ((termios->c_cflag & CREAD) == 0)
 506                 sport->port.ignore_status_mask |=
 507                         ISTAT_TO_SM(PNX8XXX_UART_INT_RX);
 508
 509         del_timer_sync(&sport->timer);
 510
 511         /*
 512          * Update the per-port timeout.
 513          */
 514         uart_update_timeout(port, termios->c_cflag, baud);
 515
 516         /*
 517          * disable interrupts and drain transmitter
 518          */
 519         old_ien = serial_in(sport, PNX8XXX_IEN);
 520         serial_out(sport, PNX8XXX_IEN, old_ien & ~(PNX8XXX_UART_INT_ALLTX |
 521                                         PNX8XXX_UART_INT_ALLRX));
 522
 523         while (serial_in(sport, PNX8XXX_FIFO) & PNX8XXX_UART_FIFO_TXFIFO_STA)
 524                 barrier();
 525
 526         /* then, disable everything */
 527         serial_out(sport, PNX8XXX_IEN, 0);
 528
 529         /* Reset the Rx and Tx FIFOs too */
 530         lcr_fcr |= PNX8XXX_UART_LCR_TX_RST;
 531         lcr_fcr |= PNX8XXX_UART_LCR_RX_RST;
 532
 533         /* set the parity, stop bits and data size */
 534         serial_out(sport, PNX8XXX_LCR, lcr_fcr);
 535
 536         /* set the baud rate */
 537         quot -= 1;
 538         serial_out(sport, PNX8XXX_BAUD, quot);
 539
 540         serial_out(sport, PNX8XXX_ICLR, -1);
 541
 542         serial_out(sport, PNX8XXX_IEN, old_ien);
 543
 544         if (UART_ENABLE_MS(&sport->port, termios->c_cflag))
 545                 pnx8xxx_enable_ms(&sport->port);
 546
 547         spin_unlock_irqrestore(&sport->port.lock, flags);
 548 }
 549
 550 static const char *pnx8xxx_type(struct uart_port *port)
 551 {
 552         struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port;
 553
 554         return sport->port.type == PORT_PNX8XXX ? "PNX8XXX" : NULL;
 555 }
 556
 557 /*
 558  * Release the memory region(s) being used by 'port'.
 559  */
 560 static void pnx8xxx_release_port(struct uart_port *port)
 561 {
 562         struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port;
 563
 564         release_mem_region(sport->port.mapbase, UART_PORT_SIZE);
 565 }
 566
 567 /*
 568  * Request the memory region(s) being used by 'port'.
 569  */
 570 static int pnx8xxx_request_port(struct uart_port *port)
 571 {
 572         struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port;
 573         return request_mem_region(sport->port.mapbase, UART_PORT_SIZE,
 574                         "pnx8xxx-uart") != NULL ? 0 : -EBUSY;
 575 }
 576
 577 /*
 578  * Configure/autoconfigure the port.
 579  */
 580 static void pnx8xxx_config_port(struct uart_port *port, int flags)
 581 {
 582         struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port;
 583
 584         if (flags & UART_CONFIG_TYPE &&
 585             pnx8xxx_request_port(&sport->port) == 0)
 586                 sport->port.type = PORT_PNX8XXX;
 587 }
 588
 589 /*
 590  * Verify the new serial_struct (for TIOCSSERIAL).
 591  * The only change we allow are to the flags and type, and
 592  * even then only between PORT_PNX8XXX and PORT_UNKNOWN
 593  */
 594 static int
 595 pnx8xxx_verify_port(struct uart_port *port, struct serial_struct *ser)
 596 {
 597         struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port;
 598         int ret = 0;
 599
 600         if (ser->type != PORT_UNKNOWN && ser->type != PORT_PNX8XXX)
 601                 ret = -EINVAL;
 602         if (sport->port.irq != ser->irq)
 603                 ret = -EINVAL;
 604         if (ser->io_type != SERIAL_IO_MEM)
 605                 ret = -EINVAL;
 606         if (sport->port.uartclk / 16 != ser->baud_base)
 607                 ret = -EINVAL;
 608         if ((void *)sport->port.mapbase != ser->iomem_base)
 609                 ret = -EINVAL;
 610         if (sport->port.iobase != ser->port)
 611                 ret = -EINVAL;
 612         if (ser->hub6 != 0)
 613                 ret = -EINVAL;
 614         return ret;
 615 }
 616
 617 static struct uart_ops pnx8xxx_pops = {
 618         .tx_empty       = pnx8xxx_tx_empty,
 619         .set_mctrl      = pnx8xxx_set_mctrl,
 620         .get_mctrl      = pnx8xxx_get_mctrl,
 621         .stop_tx        = pnx8xxx_stop_tx,
 622         .start_tx       = pnx8xxx_start_tx,
 623         .stop_rx        = pnx8xxx_stop_rx,
 624         .enable_ms      = pnx8xxx_enable_ms,
 625         .break_ctl      = pnx8xxx_break_ctl,
 626         .startup        = pnx8xxx_startup,
 627         .shutdown       = pnx8xxx_shutdown,
 628         .set_termios    = pnx8xxx_set_termios,
 629         .type           = pnx8xxx_type,
 630         .release_port   = pnx8xxx_release_port,
 631         .request_port   = pnx8xxx_request_port,
 632         .config_port    = pnx8xxx_config_port,
 633         .verify_port    = pnx8xxx_verify_port,
 634 };
 635
 636
 637 /*
 638  * Setup the PNX8XXX serial ports.
 639  *
 640  * Note also that we support "console=ttySx" where "x" is either 0 or 1.
 641  */
 642 static void __init pnx8xxx_init_ports(void)
 643 {
 644         static int first = 1;
 645         int i;
 646
 647         if (!first)
 648                 return;
 649         first = 0;
 650
 651         for (i = 0; i < NR_PORTS; i++) {
 652                 init_timer(&pnx8xxx_ports[i].timer);
 653                 pnx8xxx_ports[i].timer.function = pnx8xxx_timeout;
 654                 pnx8xxx_ports[i].timer.data     = (unsigned long)&pnx8xxx_ports[i];
 655                 pnx8xxx_ports[i].port.ops = &pnx8xxx_pops;
 656         }
 657 }
 658
 659 #ifdef CONFIG_SERIAL_PNX8XXX_CONSOLE
 660
 661 static void pnx8xxx_console_putchar(struct uart_port *port, int ch)
 662 {
 663         struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port;
 664         int status;
 665
 666         do {
 667                 /* Wait for UART_TX register to empty */
 668                 status = serial_in(sport, PNX8XXX_FIFO);
 669         } while (status & PNX8XXX_UART_FIFO_TXFIFO);
 670         serial_out(sport, PNX8XXX_FIFO, ch);
 671 }
 672
 673 /*
 674  * Interrupts are disabled on entering
 675  */static void
 676 pnx8xxx_console_write(struct console *co, const char *s, unsigned int count)
 677 {
 678         struct pnx8xxx_port *sport = &pnx8xxx_ports[co->index];
 679         unsigned int old_ien, status;
 680
 681         /*
 682          *      First, save IEN and then disable interrupts
 683          */
 684         old_ien = serial_in(sport, PNX8XXX_IEN);
 685         serial_out(sport, PNX8XXX_IEN, old_ien & ~(PNX8XXX_UART_INT_ALLTX |
 686                                         PNX8XXX_UART_INT_ALLRX));
 687
 688         uart_console_write(&sport->port, s, count, pnx8xxx_console_putchar);
 689
 690         /*
 691          *      Finally, wait for transmitter to become empty
 692          *      and restore IEN
 693          */
 694         do {
 695                 /* Wait for UART_TX register to empty */
 696                 status = serial_in(sport, PNX8XXX_FIFO);
 697         } while (status & PNX8XXX_UART_FIFO_TXFIFO);
 698
 699         /* Clear TX and EMPTY interrupt */
 700         serial_out(sport, PNX8XXX_ICLR, PNX8XXX_UART_INT_TX |
 701                              PNX8XXX_UART_INT_EMPTY);
 702
 703         serial_out(sport, PNX8XXX_IEN, old_ien);
 704 }
 705
 706 static int __init
 707 pnx8xxx_console_setup(struct console *co, char *options)
 708 {
 709         struct pnx8xxx_port *sport;
 710         int baud = 38400;
 711         int bits = 8;
 712         int parity = 'n';
 713         int flow = 'n';
 714
 715         /*
 716          * Check whether an invalid uart number has been specified, and
 717          * if so, search for the first available port that does have
 718          * console support.
 719          */
 720         if (co->index == -1 || co->index >= NR_PORTS)
 721                 co->index = 0;
 722         sport = &pnx8xxx_ports[co->index];
 723
 724         if (options)
 725                 uart_parse_options(options, &baud, &parity, &bits, &flow);
 726
 727         return uart_set_options(&sport->port, co, baud, parity, bits, flow);
 728 }
 729
 730 static struct uart_driver pnx8xxx_reg;
 731 static struct console pnx8xxx_console = {
 732         .name           = "ttyS",
 733         .write          = pnx8xxx_console_write,
 734         .device         = uart_console_device,
 735         .setup          = pnx8xxx_console_setup,
 736         .flags          = CON_PRINTBUFFER,
 737         .index          = -1,
 738         .data           = &pnx8xxx_reg,
 739 };
 740
 741 static int __init pnx8xxx_rs_console_init(void)
 742 {
 743         pnx8xxx_init_ports();
 744         register_console(&pnx8xxx_console);
 745         return 0;
 746 }
 747 console_initcall(pnx8xxx_rs_console_init);
 748
 749 #define PNX8XXX_CONSOLE &pnx8xxx_console
 750 #else
 751 #define PNX8XXX_CONSOLE NULL
 752 #endif
 753
 754 static struct uart_driver pnx8xxx_reg = {
 755         .owner                  = THIS_MODULE,
 756         .driver_name            = "ttyS",
 757         .dev_name               = "ttyS",
 758         .major                  = SERIAL_PNX8XXX_MAJOR,
 759         .minor                  = MINOR_START,
 760         .nr                     = NR_PORTS,
 761         .cons                   = PNX8XXX_CONSOLE,
 762 };
 763
 764 static int pnx8xxx_serial_suspend(struct platform_device *pdev, pm_message_t state)
 765 {
 766         struct pnx8xxx_port *sport = platform_get_drvdata(pdev);
 767
 768         return uart_suspend_port(&pnx8xxx_reg, &sport->port);
 769 }
 770
 771 static int pnx8xxx_serial_resume(struct platform_device *pdev)
 772 {
 773         struct pnx8xxx_port *sport = platform_get_drvdata(pdev);
 774
 775         return uart_resume_port(&pnx8xxx_reg, &sport->port);
 776 }
 777
 778 static int pnx8xxx_serial_probe(struct platform_device *pdev)
 779 {
 780         struct resource *res = pdev->resource;
 781         int i;
 782
 783         for (i = 0; i < pdev->num_resources; i++, res++) {
 784                 if (!(res->flags & IORESOURCE_MEM))
 785                         continue;
 786
 787                 for (i = 0; i < NR_PORTS; i++) {
 788                         if (pnx8xxx_ports[i].port.mapbase != res->start)
 789                                 continue;
 790
 791                         pnx8xxx_ports[i].port.dev = &pdev->dev;
 792                         uart_add_one_port(&pnx8xxx_reg, &pnx8xxx_ports[i].port);
 793                         platform_set_drvdata(pdev, &pnx8xxx_ports[i]);
 794                         break;
 795                 }
 796         }
 797
 798         return 0;
 799 }
 800
 801 static int pnx8xxx_serial_remove(struct platform_device *pdev)
 802 {
 803         struct pnx8xxx_port *sport = platform_get_drvdata(pdev);
 804
 805         platform_set_drvdata(pdev, NULL);
 806
 807         if (sport)
 808                 uart_remove_one_port(&pnx8xxx_reg, &sport->port);
 809
 810         return 0;
 811 }
 812
 813 static struct platform_driver pnx8xxx_serial_driver = {
 814         .driver         = {
 815                 .name   = "pnx8xxx-uart",
 816                 .owner  = THIS_MODULE,
 817         },
 818         .probe          = pnx8xxx_serial_probe,
 819         .remove         = pnx8xxx_serial_remove,
 820         .suspend        = pnx8xxx_serial_suspend,
 821         .resume         = pnx8xxx_serial_resume,
 822 };
 823
 824 static int __init pnx8xxx_serial_init(void)
 825 {
 826         int ret;
 827
 828         printk(KERN_INFO "Serial: PNX8XXX driver\n");
 829
 830         pnx8xxx_init_ports();
 831
 832         ret = uart_register_driver(&pnx8xxx_reg);
 833         if (ret == 0) {
 834                 ret = platform_driver_register(&pnx8xxx_serial_driver);
 835                 if (ret)
 836                         uart_unregister_driver(&pnx8xxx_reg);
 837         }
 838         return ret;
 839 }
 840
 841 static void __exit pnx8xxx_serial_exit(void)
 842 {
 843         platform_driver_unregister(&pnx8xxx_serial_driver);
 844         uart_unregister_driver(&pnx8xxx_reg);
 845 }
 846
 847 module_init(pnx8xxx_serial_init);
 848 module_exit(pnx8xxx_serial_exit);
 849
 850 MODULE_AUTHOR("Embedded Alley Solutions, Inc.");
 851 MODULE_DESCRIPTION("PNX8XXX SoCs serial port driver");
 852 MODULE_LICENSE("GPL");
 853 MODULE_ALIAS_CHARDEV_MAJOR(SERIAL_PNX8XXX_MAJOR);
 854 MODULE_ALIAS("platform:pnx8xxx-uart");