drivers/staging/tty/specialix.c

   1 /*
   2  *      specialix.c  -- specialix IO8+ multiport serial driver.
   3  *
   4  *      Copyright (C) 1997  Roger Wolff (R.E.Wolff@BitWizard.nl)
   5  *      Copyright (C) 1994-1996  Dmitry Gorodchanin (pgmdsg@ibi.com)
   6  *
   7  *      Specialix pays for the development and support of this driver.
   8  *      Please DO contact io8-linux@specialix.co.uk if you require
   9  *      support. But please read the documentation (specialix.txt)
  10  *      first.
  11  *
  12  *      This driver was developed in the BitWizard linux device
  13  *      driver service. If you require a linux device driver for your
  14  *      product, please contact devices@BitWizard.nl for a quote.
  15  *
  16  *      This code is firmly based on the riscom/8 serial driver,
  17  *      written by Dmitry Gorodchanin. The specialix IO8+ card
  18  *      programming information was obtained from the CL-CD1865 Data
  19  *      Book, and Specialix document number 6200059: IO8+ Hardware
  20  *      Functional Specification.
  21  *
  22  *      This program is free software; you can redistribute it and/or
  23  *      modify it under the terms of the GNU General Public License as
  24  *      published by the Free Software Foundation; either version 2 of
  25  *      the License, or (at your option) any later version.
  26  *
  27  *      This program is distributed in the hope that it will be
  28  *      useful, but WITHOUT ANY WARRANTY; without even the implied
  29  *      warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
  30  *      PURPOSE.  See the GNU General Public License for more details.
  31  *
  32  *      You should have received a copy of the GNU General Public
  33  *      License along with this program; if not, write to the Free
  34  *      Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139,
  35  *      USA.
  36  *
  37  * Revision history:
  38  *
  39  * Revision 1.0:  April 1st 1997.
  40  *                Initial release for alpha testing.
  41  * Revision 1.1:  April 14th 1997.
  42  *                Incorporated Richard Hudsons suggestions,
  43  *                removed some debugging printk's.
  44  * Revision 1.2:  April 15th 1997.
  45  *                Ported to 2.1.x kernels.
  46  * Revision 1.3:  April 17th 1997
  47  *                Backported to 2.0. (Compatibility macros).
  48  * Revision 1.4:  April 18th 1997
  49  *                Fixed DTR/RTS bug that caused the card to indicate
  50  *                "don't send data" to a modem after the password prompt.
  51  *                Fixed bug for premature (fake) interrupts.
  52  * Revision 1.5:  April 19th 1997
  53  *                fixed a minor typo in the header file, cleanup a little.
  54  *                performance warnings are now MAXed at once per minute.
  55  * Revision 1.6:  May 23 1997
  56  *                Changed the specialix=... format to include interrupt.
  57  * Revision 1.7:  May 27 1997
  58  *                Made many more debug printk's a compile time option.
  59  * Revision 1.8:  Jul 1  1997
  60  *                port to linux-2.1.43 kernel.
  61  * Revision 1.9:  Oct 9  1998
  62  *                Added stuff for the IO8+/PCI version.
  63  * Revision 1.10: Oct 22  1999 / Jan 21 2000.
  64  *                Added stuff for setserial.
  65  *                Nicolas Mailhot (Nicolas.Mailhot@email.enst.fr)
  66  *
  67  */
  68
  69 #define VERSION "1.11"
  70
  71
  72 /*
  73  * There is a bunch of documentation about the card, jumpers, config
  74  * settings, restrictions, cables, device names and numbers in
  75  * Documentation/serial/specialix.txt
  76  */
  77
  78 #include <linux/module.h>
  79
  80 #include <linux/io.h>
  81 #include <linux/kernel.h>
  82 #include <linux/sched.h>
  83 #include <linux/ioport.h>
  84 #include <linux/interrupt.h>
  85 #include <linux/errno.h>
  86 #include <linux/tty.h>
  87 #include <linux/tty_flip.h>
  88 #include <linux/mm.h>
  89 #include <linux/serial.h>
  90 #include <linux/fcntl.h>
  91 #include <linux/major.h>
  92 #include <linux/delay.h>
  93 #include <linux/pci.h>
  94 #include <linux/init.h>
  95 #include <linux/uaccess.h>
  96 #include <linux/gfp.h>
  97
  98 #include "specialix_io8.h"
  99 #include "cd1865.h"
 100
 101
 102 /*
 103    This driver can spew a whole lot of debugging output at you. If you
 104    need maximum performance, you should disable the DEBUG define. To
 105    aid in debugging in the field, I'm leaving the compile-time debug
 106    features enabled, and disable them "runtime". That allows me to
 107    instruct people with problems to enable debugging without requiring
 108    them to recompile...
 109 */
 110 #define DEBUG
 111
 112 static int sx_debug;
 113 static int sx_rxfifo = SPECIALIX_RXFIFO;
 114 static int sx_rtscts;
 115
 116 #ifdef DEBUG
 117 #define dprintk(f, str...) if (sx_debug & f) printk(str)
 118 #else
 119 #define dprintk(f, str...) /* nothing */
 120 #endif
 121
 122 #define SX_DEBUG_FLOW    0x0001
 123 #define SX_DEBUG_DATA    0x0002
 124 #define SX_DEBUG_PROBE   0x0004
 125 #define SX_DEBUG_CHAN    0x0008
 126 #define SX_DEBUG_INIT    0x0010
 127 #define SX_DEBUG_RX      0x0020
 128 #define SX_DEBUG_TX      0x0040
 129 #define SX_DEBUG_IRQ     0x0080
 130 #define SX_DEBUG_OPEN    0x0100
 131 #define SX_DEBUG_TERMIOS 0x0200
 132 #define SX_DEBUG_SIGNALS 0x0400
 133 #define SX_DEBUG_FIFO    0x0800
 134
 135
 136 #define func_enter() dprintk(SX_DEBUG_FLOW, "io8: enter %s\n", __func__)
 137 #define func_exit()  dprintk(SX_DEBUG_FLOW, "io8: exit  %s\n", __func__)
 138
 139
 140 /* Configurable options: */
 141
 142 /* Am I paranoid or not ? ;-) */
 143 #define SPECIALIX_PARANOIA_CHECK
 144
 145 /*
 146  * The following defines are mostly for testing purposes. But if you need
 147  * some nice reporting in your syslog, you can define them also.
 148  */
 149 #undef SX_REPORT_FIFO
 150 #undef SX_REPORT_OVERRUN
 151
 152
 153
 154
 155 #define SPECIALIX_LEGAL_FLAGS \
 156         (ASYNC_HUP_NOTIFY   | ASYNC_SAK          | ASYNC_SPLIT_TERMIOS   | \
 157          ASYNC_SPD_HI       | ASYNC_SPEED_VHI    | ASYNC_SESSION_LOCKOUT | \
 158          ASYNC_PGRP_LOCKOUT | ASYNC_CALLOUT_NOHUP)
 159
 160 static struct tty_driver *specialix_driver;
 161
 162 static struct specialix_board sx_board[SX_NBOARD] =  {
 163         { 0, SX_IOBASE1,  9, },
 164         { 0, SX_IOBASE2, 11, },
 165         { 0, SX_IOBASE3, 12, },
 166         { 0, SX_IOBASE4, 15, },
 167 };
 168
 169 static struct specialix_port sx_port[SX_NBOARD * SX_NPORT];
 170
 171
 172 static int sx_paranoia_check(struct specialix_port const *port,
 173                                     char *name, const char *routine)
 174 {
 175 #ifdef SPECIALIX_PARANOIA_CHECK
 176         static const char *badmagic = KERN_ERR
 177           "sx: Warning: bad specialix port magic number for device %s in %s\n";
 178         static const char *badinfo = KERN_ERR
 179           "sx: Warning: null specialix port for device %s in %s\n";
 180
 181         if (!port) {
 182                 printk(badinfo, name, routine);
 183                 return 1;
 184         }
 185         if (port->magic != SPECIALIX_MAGIC) {
 186                 printk(badmagic, name, routine);
 187                 return 1;
 188         }
 189 #endif
 190         return 0;
 191 }
 192
 193
 194 /*
 195  *
 196  *  Service functions for specialix IO8+ driver.
 197  *
 198  */
 199
 200 /* Get board number from pointer */
 201 static inline int board_No(struct specialix_board *bp)
 202 {
 203         return bp - sx_board;
 204 }
 205
 206
 207 /* Get port number from pointer */
 208 static inline int port_No(struct specialix_port const *port)
 209 {
 210         return SX_PORT(port - sx_port);
 211 }
 212
 213
 214 /* Get pointer to board from pointer to port */
 215 static inline struct specialix_board *port_Board(
 216                                         struct specialix_port const *port)
 217 {
 218         return &sx_board[SX_BOARD(port - sx_port)];
 219 }
 220
 221
 222 /* Input Byte from CL CD186x register */
 223 static inline unsigned char sx_in(struct specialix_board *bp,
 224                                                         unsigned short reg)
 225 {
 226         bp->reg = reg | 0x80;
 227         outb(reg | 0x80, bp->base + SX_ADDR_REG);
 228         return inb(bp->base + SX_DATA_REG);
 229 }
 230
 231
 232 /* Output Byte to CL CD186x register */
 233 static inline void sx_out(struct specialix_board *bp, unsigned short reg,
 234                           unsigned char val)
 235 {
 236         bp->reg = reg | 0x80;
 237         outb(reg | 0x80, bp->base + SX_ADDR_REG);
 238         outb(val, bp->base + SX_DATA_REG);
 239 }
 240
 241
 242 /* Input Byte from CL CD186x register */
 243 static inline unsigned char sx_in_off(struct specialix_board *bp,
 244                                 unsigned short reg)
 245 {
 246         bp->reg = reg;
 247         outb(reg, bp->base + SX_ADDR_REG);
 248         return inb(bp->base + SX_DATA_REG);
 249 }
 250
 251
 252 /* Output Byte to CL CD186x register */
 253 static inline void sx_out_off(struct specialix_board  *bp,
 254                                 unsigned short reg, unsigned char val)
 255 {
 256         bp->reg = reg;
 257         outb(reg, bp->base + SX_ADDR_REG);
 258         outb(val, bp->base + SX_DATA_REG);
 259 }
 260
 261
 262 /* Wait for Channel Command Register ready */
 263 static void sx_wait_CCR(struct specialix_board  *bp)
 264 {
 265         unsigned long delay, flags;
 266         unsigned char ccr;
 267
 268         for (delay = SX_CCR_TIMEOUT; delay; delay--) {
 269                 spin_lock_irqsave(&bp->lock, flags);
 270                 ccr = sx_in(bp, CD186x_CCR);
 271                 spin_unlock_irqrestore(&bp->lock, flags);
 272                 if (!ccr)
 273                         return;
 274                 udelay(1);
 275         }
 276
 277         printk(KERN_ERR "sx%d: Timeout waiting for CCR.\n", board_No(bp));
 278 }
 279
 280
 281 /* Wait for Channel Command Register ready */
 282 static void sx_wait_CCR_off(struct specialix_board  *bp)
 283 {
 284         unsigned long delay;
 285         unsigned char crr;
 286         unsigned long flags;
 287
 288         for (delay = SX_CCR_TIMEOUT; delay; delay--) {
 289                 spin_lock_irqsave(&bp->lock, flags);
 290                 crr = sx_in_off(bp, CD186x_CCR);
 291                 spin_unlock_irqrestore(&bp->lock, flags);
 292                 if (!crr)
 293                         return;
 294                 udelay(1);
 295         }
 296
 297         printk(KERN_ERR "sx%d: Timeout waiting for CCR.\n", board_No(bp));
 298 }
 299
 300
 301 /*
 302  *  specialix IO8+ IO range functions.
 303  */
 304
 305 static int sx_request_io_range(struct specialix_board *bp)
 306 {
 307         return request_region(bp->base,
 308                 bp->flags & SX_BOARD_IS_PCI ? SX_PCI_IO_SPACE : SX_IO_SPACE,
 309                 "specialix IO8+") == NULL;
 310 }
 311
 312
 313 static void sx_release_io_range(struct specialix_board *bp)
 314 {
 315         release_region(bp->base, bp->flags & SX_BOARD_IS_PCI ?
 316                                         SX_PCI_IO_SPACE : SX_IO_SPACE);
 317 }
 318
 319
 320 /* Set the IRQ using the RTS lines that run to the PAL on the board.... */
 321 static int sx_set_irq(struct specialix_board *bp)
 322 {
 323         int virq;
 324         int i;
 325         unsigned long flags;
 326
 327         if (bp->flags & SX_BOARD_IS_PCI)
 328                 return 1;
 329         switch (bp->irq) {
 330         /* In the same order as in the docs... */
 331         case 15:
 332                 virq = 0;
 333                 break;
 334         case 12:
 335                 virq = 1;
 336                 break;
 337         case 11:
 338                 virq = 2;
 339                 break;
 340         case 9:
 341                 virq = 3;
 342                 break;
 343         default:printk(KERN_ERR
 344                             "Speclialix: cannot set irq to %d.\n", bp->irq);
 345                 return 0;
 346         }
 347         spin_lock_irqsave(&bp->lock, flags);
 348         for (i = 0; i < 2; i++) {
 349                 sx_out(bp, CD186x_CAR, i);
 350                 sx_out(bp, CD186x_MSVRTS, ((virq >> i) & 0x1)? MSVR_RTS:0);
 351         }
 352         spin_unlock_irqrestore(&bp->lock, flags);
 353         return 1;
 354 }
 355
 356
 357 /* Reset and setup CD186x chip */
 358 static int sx_init_CD186x(struct specialix_board  *bp)
 359 {
 360         unsigned long flags;
 361         int scaler;
 362         int rv = 1;
 363
 364         func_enter();
 365         sx_wait_CCR_off(bp);                       /* Wait for CCR ready        */
 366         spin_lock_irqsave(&bp->lock, flags);
 367         sx_out_off(bp, CD186x_CCR, CCR_HARDRESET);      /* Reset CD186x chip          */
 368         spin_unlock_irqrestore(&bp->lock, flags);
 369         msleep(50);                                     /* Delay 0.05 sec            */
 370         spin_lock_irqsave(&bp->lock, flags);
 371         sx_out_off(bp, CD186x_GIVR, SX_ID);             /* Set ID for this chip      */
 372         sx_out_off(bp, CD186x_GICR, 0);                 /* Clear all bits            */
 373         sx_out_off(bp, CD186x_PILR1, SX_ACK_MINT);      /* Prio for modem intr       */
 374         sx_out_off(bp, CD186x_PILR2, SX_ACK_TINT);      /* Prio for transmitter intr */
 375         sx_out_off(bp, CD186x_PILR3, SX_ACK_RINT);      /* Prio for receiver intr    */
 376         /* Set RegAckEn */
 377         sx_out_off(bp, CD186x_SRCR, sx_in(bp, CD186x_SRCR) | SRCR_REGACKEN);
 378
 379         /* Setting up prescaler. We need 4 ticks per 1 ms */
 380         scaler =  SX_OSCFREQ/SPECIALIX_TPS;
 381
 382         sx_out_off(bp, CD186x_PPRH, scaler >> 8);
 383         sx_out_off(bp, CD186x_PPRL, scaler & 0xff);
 384         spin_unlock_irqrestore(&bp->lock, flags);
 385
 386         if (!sx_set_irq(bp)) {
 387                 /* Figure out how to pass this along... */
 388                 printk(KERN_ERR "Cannot set irq to %d.\n", bp->irq);
 389                 rv = 0;
 390         }
 391
 392         func_exit();
 393         return rv;
 394 }
 395
 396
 397 static int read_cross_byte(struct specialix_board *bp, int reg, int bit)
 398 {
 399         int i;
 400         int t;
 401         unsigned long flags;
 402
 403         spin_lock_irqsave(&bp->lock, flags);
 404         for (i = 0, t = 0; i < 8; i++) {
 405                 sx_out_off(bp, CD186x_CAR, i);
 406                 if (sx_in_off(bp, reg) & bit)
 407                         t |= 1 << i;
 408         }
 409         spin_unlock_irqrestore(&bp->lock, flags);
 410
 411         return t;
 412 }
 413
 414
 415 /* Main probing routine, also sets irq. */
 416 static int sx_probe(struct specialix_board *bp)
 417 {
 418         unsigned char val1, val2;
 419         int rev;
 420         int chip;
 421
 422         func_enter();
 423
 424         if (sx_request_io_range(bp)) {
 425                 func_exit();
 426                 return 1;
 427         }
 428
 429         /* Are the I/O ports here ? */
 430         sx_out_off(bp, CD186x_PPRL, 0x5a);
 431         udelay(1);
 432         val1 = sx_in_off(bp, CD186x_PPRL);
 433
 434         sx_out_off(bp, CD186x_PPRL, 0xa5);
 435         udelay(1);
 436         val2 = sx_in_off(bp, CD186x_PPRL);
 437
 438
 439         if (val1 != 0x5a || val2 != 0xa5) {
 440                 printk(KERN_INFO
 441                         "sx%d: specialix IO8+ Board at 0x%03x not found.\n",
 442                                                 board_No(bp), bp->base);
 443                 sx_release_io_range(bp);
 444                 func_exit();
 445                 return 1;
 446         }
 447
 448         /* Check the DSR lines that Specialix uses as board
 449            identification */
 450         val1 = read_cross_byte(bp, CD186x_MSVR, MSVR_DSR);
 451         val2 = read_cross_byte(bp, CD186x_MSVR, MSVR_RTS);
 452         dprintk(SX_DEBUG_INIT,
 453                         "sx%d: DSR lines are: %02x, rts lines are: %02x\n",
 454                                         board_No(bp), val1, val2);
 455
 456         /* They managed to switch the bit order between the docs and
 457            the IO8+ card. The new PCI card now conforms to old docs.
 458            They changed the PCI docs to reflect the situation on the
 459            old card. */
 460         val2 = (bp->flags & SX_BOARD_IS_PCI)?0x4d : 0xb2;
 461         if (val1 != val2) {
 462                 printk(KERN_INFO
 463                   "sx%d: specialix IO8+ ID %02x at 0x%03x not found (%02x).\n",
 464                        board_No(bp), val2, bp->base, val1);
 465                 sx_release_io_range(bp);
 466                 func_exit();
 467                 return 1;
 468         }
 469
 470
 471         /* Reset CD186x again  */
 472         if (!sx_init_CD186x(bp)) {
 473                 sx_release_io_range(bp);
 474                 func_exit();
 475                 return 1;
 476         }
 477
 478         sx_request_io_range(bp);
 479         bp->flags |= SX_BOARD_PRESENT;
 480
 481         /* Chip           revcode   pkgtype
 482                           GFRCR     SRCR bit 7
 483            CD180 rev B    0x81      0
 484            CD180 rev C    0x82      0
 485            CD1864 rev A   0x82      1
 486            CD1865 rev A   0x83      1  -- Do not use!!! Does not work.
 487            CD1865 rev B   0x84      1
 488          -- Thanks to Gwen Wang, Cirrus Logic.
 489          */
 490
 491         switch (sx_in_off(bp, CD186x_GFRCR)) {
 492         case 0x82:
 493                 chip = 1864;
 494                 rev = 'A';
 495                 break;
 496         case 0x83:
 497                 chip = 1865;
 498                 rev = 'A';
 499                 break;
 500         case 0x84:
 501                 chip = 1865;
 502                 rev = 'B';
 503                 break;
 504         case 0x85:
 505                 chip = 1865;
 506                 rev = 'C';
 507                 break; /* Does not exist at this time */
 508         default:
 509                 chip = -1;
 510                 rev = 'x';
 511         }
 512
 513         dprintk(SX_DEBUG_INIT, " GFCR = 0x%02x\n", sx_in_off(bp, CD186x_GFRCR));
 514
 515         printk(KERN_INFO
 516     "sx%d: specialix IO8+ board detected at 0x%03x, IRQ %d, CD%d Rev. %c.\n",
 517                                 board_No(bp), bp->base, bp->irq, chip, rev);
 518
 519         func_exit();
 520         return 0;
 521 }
 522
 523 /*
 524  *
 525  *  Interrupt processing routines.
 526  * */
 527
 528 static struct specialix_port *sx_get_port(struct specialix_board *bp,
 529                                                unsigned char const *what)
 530 {
 531         unsigned char channel;
 532         struct specialix_port *port = NULL;
 533
 534         channel = sx_in(bp, CD186x_GICR) >> GICR_CHAN_OFF;
 535         dprintk(SX_DEBUG_CHAN, "channel: %d\n", channel);
 536         if (channel < CD186x_NCH) {
 537                 port = &sx_port[board_No(bp) * SX_NPORT + channel];
 538                 dprintk(SX_DEBUG_CHAN, "port: %d %p flags: 0x%lx\n",
 539                         board_No(bp) * SX_NPORT + channel,  port,
 540                         port->port.flags & ASYNC_INITIALIZED);
 541
 542                 if (port->port.flags & ASYNC_INITIALIZED) {
 543                         dprintk(SX_DEBUG_CHAN, "port: %d %p\n", channel, port);
 544                         func_exit();
 545                         return port;
 546                 }
 547         }
 548         printk(KERN_INFO "sx%d: %s interrupt from invalid port %d\n",
 549                board_No(bp), what, channel);
 550         return NULL;
 551 }
 552
 553
 554 static void sx_receive_exc(struct specialix_board *bp)
 555 {
 556         struct specialix_port *port;
 557         struct tty_struct *tty;
 558         unsigned char status;
 559         unsigned char ch, flag;
 560
 561         func_enter();
 562
 563         port = sx_get_port(bp, "Receive");
 564         if (!port) {
 565                 dprintk(SX_DEBUG_RX, "Hmm, couldn't find port.\n");
 566                 func_exit();
 567                 return;
 568         }
 569         tty = port->port.tty;
 570
 571         status = sx_in(bp, CD186x_RCSR);
 572
 573         dprintk(SX_DEBUG_RX, "status: 0x%x\n", status);
 574         if (status & RCSR_OE) {
 575                 port->overrun++;
 576                 dprintk(SX_DEBUG_FIFO,
 577                         "sx%d: port %d: Overrun. Total %ld overruns.\n",
 578                                 board_No(bp), port_No(port), port->overrun);
 579         }
 580         status &= port->mark_mask;
 581
 582         /* This flip buffer check needs to be below the reading of the
 583            status register to reset the chip's IRQ.... */
 584         if (tty_buffer_request_room(tty, 1) == 0) {
 585                 dprintk(SX_DEBUG_FIFO,
 586                     "sx%d: port %d: Working around flip buffer overflow.\n",
 587                                         board_No(bp), port_No(port));
 588                 func_exit();
 589                 return;
 590         }
 591
 592         ch = sx_in(bp, CD186x_RDR);
 593         if (!status) {
 594                 func_exit();
 595                 return;
 596         }
 597         if (status & RCSR_TOUT) {
 598                 printk(KERN_INFO
 599                     "sx%d: port %d: Receiver timeout. Hardware problems ?\n",
 600                                         board_No(bp), port_No(port));
 601                 func_exit();
 602                 return;
 603
 604         } else if (status & RCSR_BREAK) {
 605                 dprintk(SX_DEBUG_RX, "sx%d: port %d: Handling break...\n",
 606                        board_No(bp), port_No(port));
 607                 flag = TTY_BREAK;
 608                 if (port->port.flags & ASYNC_SAK)
 609                         do_SAK(tty);
 610
 611         } else if (status & RCSR_PE)
 612                 flag = TTY_PARITY;
 613
 614         else if (status & RCSR_FE)
 615                 flag = TTY_FRAME;
 616
 617         else if (status & RCSR_OE)
 618                 flag = TTY_OVERRUN;
 619
 620         else
 621                 flag = TTY_NORMAL;
 622
 623         if (tty_insert_flip_char(tty, ch, flag))
 624                 tty_flip_buffer_push(tty);
 625         func_exit();
 626 }
 627
 628
 629 static void sx_receive(struct specialix_board *bp)
 630 {
 631         struct specialix_port *port;
 632         struct tty_struct *tty;
 633         unsigned char count;
 634
 635         func_enter();
 636
 637         port = sx_get_port(bp, "Receive");
 638         if (port == NULL) {
 639                 dprintk(SX_DEBUG_RX, "Hmm, couldn't find port.\n");
 640                 func_exit();
 641                 return;
 642         }
 643         tty = port->port.tty;
 644
 645         count = sx_in(bp, CD186x_RDCR);
 646         dprintk(SX_DEBUG_RX, "port: %p: count: %d\n", port, count);
 647         port->hits[count > 8 ? 9 : count]++;
 648
 649         while (count--)
 650                 tty_insert_flip_char(tty, sx_in(bp, CD186x_RDR), TTY_NORMAL);
 651         tty_flip_buffer_push(tty);
 652         func_exit();
 653 }
 654
 655
 656 static void sx_transmit(struct specialix_board *bp)
 657 {
 658         struct specialix_port *port;
 659         struct tty_struct *tty;
 660         unsigned char count;
 661
 662         func_enter();
 663         port = sx_get_port(bp, "Transmit");
 664         if (port == NULL) {
 665                 func_exit();
 666                 return;
 667         }
 668         dprintk(SX_DEBUG_TX, "port: %p\n", port);
 669         tty = port->port.tty;
 670
 671         if (port->IER & IER_TXEMPTY) {
 672                 /* FIFO drained */
 673                 sx_out(bp, CD186x_CAR, port_No(port));
 674                 port->IER &= ~IER_TXEMPTY;
 675                 sx_out(bp, CD186x_IER, port->IER);
 676                 func_exit();
 677                 return;
 678         }
 679
 680         if ((port->xmit_cnt <= 0 && !port->break_length)
 681             || tty->stopped || tty->hw_stopped) {
 682                 sx_out(bp, CD186x_CAR, port_No(port));
 683                 port->IER &= ~IER_TXRDY;
 684                 sx_out(bp, CD186x_IER, port->IER);
 685                 func_exit();
 686                 return;
 687         }
 688
 689         if (port->break_length) {
 690                 if (port->break_length > 0) {
 691                         if (port->COR2 & COR2_ETC) {
 692                                 sx_out(bp, CD186x_TDR, CD186x_C_ESC);
 693                                 sx_out(bp, CD186x_TDR, CD186x_C_SBRK);
 694                                 port->COR2 &= ~COR2_ETC;
 695                         }
 696                         count = min_t(int, port->break_length, 0xff);
 697                         sx_out(bp, CD186x_TDR, CD186x_C_ESC);
 698                         sx_out(bp, CD186x_TDR, CD186x_C_DELAY);
 699                         sx_out(bp, CD186x_TDR, count);
 700                         port->break_length -= count;
 701                         if (port->break_length == 0)
 702                                 port->break_length--;
 703                 } else {
 704                         sx_out(bp, CD186x_TDR, CD186x_C_ESC);
 705                         sx_out(bp, CD186x_TDR, CD186x_C_EBRK);
 706                         sx_out(bp, CD186x_COR2, port->COR2);
 707                         sx_wait_CCR(bp);
 708                         sx_out(bp, CD186x_CCR, CCR_CORCHG2);
 709                         port->break_length = 0;
 710                 }
 711
 712                 func_exit();
 713                 return;
 714         }
 715
 716         count = CD186x_NFIFO;
 717         do {
 718                 sx_out(bp, CD186x_TDR, port->xmit_buf[port->xmit_tail++]);
 719                 port->xmit_tail = port->xmit_tail & (SERIAL_XMIT_SIZE-1);
 720                 if (--port->xmit_cnt <= 0)
 721                         break;
 722         } while (--count > 0);
 723
 724         if (port->xmit_cnt <= 0) {
 725                 sx_out(bp, CD186x_CAR, port_No(port));
 726                 port->IER &= ~IER_TXRDY;
 727                 sx_out(bp, CD186x_IER, port->IER);
 728         }
 729         if (port->xmit_cnt <= port->wakeup_chars)
 730                 tty_wakeup(tty);
 731
 732         func_exit();
 733 }
 734
 735
 736 static void sx_check_modem(struct specialix_board *bp)
 737 {
 738         struct specialix_port *port;
 739         struct tty_struct *tty;
 740         unsigned char mcr;
 741         int msvr_cd;
 742
 743         dprintk(SX_DEBUG_SIGNALS, "Modem intr. ");
 744         port = sx_get_port(bp, "Modem");
 745         if (port == NULL)
 746                 return;
 747
 748         tty = port->port.tty;
 749
 750         mcr = sx_in(bp, CD186x_MCR);
 751
 752         if ((mcr & MCR_CDCHG)) {
 753                 dprintk(SX_DEBUG_SIGNALS, "CD just changed... ");
 754                 msvr_cd = sx_in(bp, CD186x_MSVR) & MSVR_CD;
 755                 if (msvr_cd) {
 756                         dprintk(SX_DEBUG_SIGNALS, "Waking up guys in open.\n");
 757                         wake_up_interruptible(&port->port.open_wait);
 758                 } else {
 759                         dprintk(SX_DEBUG_SIGNALS, "Sending HUP.\n");
 760                         tty_hangup(tty);
 761                 }
 762         }
 763
 764 #ifdef SPECIALIX_BRAIN_DAMAGED_CTS
 765         if (mcr & MCR_CTSCHG) {
 766                 if (sx_in(bp, CD186x_MSVR) & MSVR_CTS) {
 767                         tty->hw_stopped = 0;
 768                         port->IER |= IER_TXRDY;
 769                         if (port->xmit_cnt <= port->wakeup_chars)
 770                                 tty_wakeup(tty);
 771                 } else {
 772                         tty->hw_stopped = 1;
 773                         port->IER &= ~IER_TXRDY;
 774                 }
 775                 sx_out(bp, CD186x_IER, port->IER);
 776         }
 777         if (mcr & MCR_DSSXHG) {
 778                 if (sx_in(bp, CD186x_MSVR) & MSVR_DSR) {
 779                         tty->hw_stopped = 0;
 780                         port->IER |= IER_TXRDY;
 781                         if (port->xmit_cnt <= port->wakeup_chars)
 782                                 tty_wakeup(tty);
 783                 } else {
 784                         tty->hw_stopped = 1;
 785                         port->IER &= ~IER_TXRDY;
 786                 }
 787                 sx_out(bp, CD186x_IER, port->IER);
 788         }
 789 #endif /* SPECIALIX_BRAIN_DAMAGED_CTS */
 790
 791         /* Clear change bits */
 792         sx_out(bp, CD186x_MCR, 0);
 793 }
 794
 795
 796 /* The main interrupt processing routine */
 797 static irqreturn_t sx_interrupt(int dummy, void *dev_id)
 798 {
 799         unsigned char status;
 800         unsigned char ack;
 801         struct specialix_board *bp = dev_id;
 802         unsigned long loop = 0;
 803         int saved_reg;
 804         unsigned long flags;
 805
 806         func_enter();
 807
 808         spin_lock_irqsave(&bp->lock, flags);
 809
 810         dprintk(SX_DEBUG_FLOW, "enter %s port %d room: %ld\n", __func__,
 811                 port_No(sx_get_port(bp, "INT")),
 812                 SERIAL_XMIT_SIZE - sx_get_port(bp, "ITN")->xmit_cnt - 1);
 813         if (!(bp->flags & SX_BOARD_ACTIVE)) {
 814                 dprintk(SX_DEBUG_IRQ, "sx: False interrupt. irq %d.\n",
 815                                                                 bp->irq);
 816                 spin_unlock_irqrestore(&bp->lock, flags);
 817                 func_exit();
 818                 return IRQ_NONE;
 819         }
 820
 821         saved_reg = bp->reg;
 822
 823         while (++loop < 16) {
 824                 status = sx_in(bp, CD186x_SRSR) &
 825                                 (SRSR_RREQint | SRSR_TREQint | SRSR_MREQint);
 826                 if (status == 0)
 827                         break;
 828                 if (status & SRSR_RREQint) {
 829                         ack = sx_in(bp, CD186x_RRAR);
 830
 831                         if (ack == (SX_ID | GIVR_IT_RCV))
 832                                 sx_receive(bp);
 833                         else if (ack == (SX_ID | GIVR_IT_REXC))
 834                                 sx_receive_exc(bp);
 835                         else
 836                                 printk(KERN_ERR
 837                                 "sx%d: status: 0x%x Bad receive ack 0x%02x.\n",
 838                                                 board_No(bp), status, ack);
 839
 840                 } else if (status & SRSR_TREQint) {
 841                         ack = sx_in(bp, CD186x_TRAR);
 842
 843                         if (ack == (SX_ID | GIVR_IT_TX))
 844                                 sx_transmit(bp);
 845                         else
 846                                 printk(KERN_ERR "sx%d: status: 0x%x Bad transmit ack 0x%02x. port: %d\n",
 847                                         board_No(bp), status, ack,
 848                                         port_No(sx_get_port(bp, "Int")));
 849                 } else if (status & SRSR_MREQint) {
 850                         ack = sx_in(bp, CD186x_MRAR);
 851
 852                         if (ack == (SX_ID | GIVR_IT_MODEM))
 853                                 sx_check_modem(bp);
 854                         else
 855                                 printk(KERN_ERR
 856                                   "sx%d: status: 0x%x Bad modem ack 0x%02x.\n",
 857                                        board_No(bp), status, ack);
 858
 859                 }
 860
 861                 sx_out(bp, CD186x_EOIR, 0);   /* Mark end of interrupt */
 862         }
 863         bp->reg = saved_reg;
 864         outb(bp->reg, bp->base + SX_ADDR_REG);
 865         spin_unlock_irqrestore(&bp->lock, flags);
 866         func_exit();
 867         return IRQ_HANDLED;
 868 }
 869
 870
 871 /*
 872  *  Routines for open & close processing.
 873  */
 874
 875 static void turn_ints_off(struct specialix_board *bp)
 876 {
 877         unsigned long flags;
 878
 879         func_enter();
 880         spin_lock_irqsave(&bp->lock, flags);
 881         (void) sx_in_off(bp, 0); /* Turn off interrupts. */
 882         spin_unlock_irqrestore(&bp->lock, flags);
 883
 884         func_exit();
 885 }
 886
 887 static void turn_ints_on(struct specialix_board *bp)
 888 {
 889         unsigned long flags;
 890
 891         func_enter();
 892
 893         spin_lock_irqsave(&bp->lock, flags);
 894         (void) sx_in(bp, 0); /* Turn ON interrupts. */
 895         spin_unlock_irqrestore(&bp->lock, flags);
 896
 897         func_exit();
 898 }
 899
 900
 901 /* Called with disabled interrupts */
 902 static int sx_setup_board(struct specialix_board *bp)
 903 {
 904         int error;
 905
 906         if (bp->flags & SX_BOARD_ACTIVE)
 907                 return 0;
 908
 909         if (bp->flags & SX_BOARD_IS_PCI)
 910                 error = request_irq(bp->irq, sx_interrupt,
 911                         IRQF_DISABLED | IRQF_SHARED, "specialix IO8+", bp);
 912         else
 913                 error = request_irq(bp->irq, sx_interrupt,
 914                         IRQF_DISABLED, "specialix IO8+", bp);
 915
 916         if (error)
 917                 return error;
 918
 919         turn_ints_on(bp);
 920         bp->flags |= SX_BOARD_ACTIVE;
 921
 922         return 0;
 923 }
 924
 925
 926 /* Called with disabled interrupts */
 927 static void sx_shutdown_board(struct specialix_board *bp)
 928 {
 929         func_enter();
 930
 931         if (!(bp->flags & SX_BOARD_ACTIVE)) {
 932                 func_exit();
 933                 return;
 934         }
 935
 936         bp->flags &= ~SX_BOARD_ACTIVE;
 937
 938         dprintk(SX_DEBUG_IRQ, "Freeing IRQ%d for board %d.\n",
 939                  bp->irq, board_No(bp));
 940         free_irq(bp->irq, bp);
 941         turn_ints_off(bp);
 942         func_exit();
 943 }
 944
 945 static unsigned int sx_crtscts(struct tty_struct *tty)
 946 {
 947         if (sx_rtscts)
 948                 return C_CRTSCTS(tty);
 949         return 1;
 950 }
 951
 952 /*
 953  * Setting up port characteristics.
 954  * Must be called with disabled interrupts
 955  */
 956 static void sx_change_speed(struct specialix_board *bp,
 957                                                 struct specialix_port *port)
 958 {
 959         struct tty_struct *tty;
 960         unsigned long baud;
 961         long tmp;
 962         unsigned char cor1 = 0, cor3 = 0;
 963         unsigned char mcor1 = 0, mcor2 = 0;
 964         static unsigned long again;
 965         unsigned long flags;
 966
 967         func_enter();
 968
 969         tty = port->port.tty;
 970         if (!tty || !tty->termios) {
 971                 func_exit();
 972                 return;
 973         }
 974
 975         port->IER  = 0;
 976         port->COR2 = 0;
 977         /* Select port on the board */
 978         spin_lock_irqsave(&bp->lock, flags);
 979         sx_out(bp, CD186x_CAR, port_No(port));
 980
 981         /* The Specialix board doesn't implement the RTS lines.
 982            They are used to set the IRQ level. Don't touch them. */
 983         if (sx_crtscts(tty))
 984                 port->MSVR = MSVR_DTR | (sx_in(bp, CD186x_MSVR) & MSVR_RTS);
 985         else
 986                 port->MSVR =  (sx_in(bp, CD186x_MSVR) & MSVR_RTS);
 987         spin_unlock_irqrestore(&bp->lock, flags);
 988         dprintk(SX_DEBUG_TERMIOS, "sx: got MSVR=%02x.\n", port->MSVR);
 989         baud = tty_get_baud_rate(tty);
 990
 991         if (baud == 38400) {
 992                 if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
 993                         baud = 57600;
 994                 if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
 995                         baud = 115200;
 996         }
 997
 998         if (!baud) {
 999                 /* Drop DTR & exit */
1000                 dprintk(SX_DEBUG_TERMIOS, "Dropping DTR...  Hmm....\n");
1001                 if (!sx_crtscts(tty)) {
1002                         port->MSVR &= ~MSVR_DTR;
1003                         spin_lock_irqsave(&bp->lock, flags);
1004                         sx_out(bp, CD186x_MSVR, port->MSVR);
1005                         spin_unlock_irqrestore(&bp->lock, flags);
1006                 } else
1007                         dprintk(SX_DEBUG_TERMIOS, "Can't drop DTR: no DTR.\n");
1008                 return;
1009         } else {
1010                 /* Set DTR on */
1011                 if (!sx_crtscts(tty))
1012                         port->MSVR |= MSVR_DTR;
1013         }
1014
1015         /*
1016          * Now we must calculate some speed depended things
1017          */
1018
1019         /* Set baud rate for port */
1020         tmp = port->custom_divisor ;
1021         if (tmp)
1022                 printk(KERN_INFO
1023                         "sx%d: Using custom baud rate divisor %ld. \n"
1024                         "This is an untested option, please be careful.\n",
1025                                                         port_No(port), tmp);
1026         else
1027                 tmp = (((SX_OSCFREQ + baud/2) / baud + CD186x_TPC/2) /
1028                                                                 CD186x_TPC);
1029
1030         if (tmp < 0x10 && time_before(again, jiffies)) {
1031                 again = jiffies + HZ * 60;
1032                 /* Page 48 of version 2.0 of the CL-CD1865 databook */
1033                 if (tmp >= 12) {
1034                         printk(KERN_INFO "sx%d: Baud rate divisor is %ld. \n"
1035                                 "Performance degradation is possible.\n"
1036                                 "Read specialix.txt for more info.\n",
1037                                                 port_No(port), tmp);
1038                 } else {
1039                         printk(KERN_INFO "sx%d: Baud rate divisor is %ld. \n"
1040                 "Warning: overstressing Cirrus chip. This might not work.\n"
1041                 "Read specialix.txt for more info.\n", port_No(port), tmp);
1042                 }
1043         }
1044         spin_lock_irqsave(&bp->lock, flags);
1045         sx_out(bp, CD186x_RBPRH, (tmp >> 8) & 0xff);
1046         sx_out(bp, CD186x_TBPRH, (tmp >> 8) & 0xff);
1047         sx_out(bp, CD186x_RBPRL, tmp & 0xff);
1048         sx_out(bp, CD186x_TBPRL, tmp & 0xff);
1049         spin_unlock_irqrestore(&bp->lock, flags);
1050         if (port->custom_divisor)
1051                 baud = (SX_OSCFREQ + port->custom_divisor/2) /
1052                                                         port->custom_divisor;
1053         baud = (baud + 5) / 10;         /* Estimated CPS */
1054
1055         /* Two timer ticks seems enough to wakeup something like SLIP driver */
1056         tmp = ((baud + HZ/2) / HZ) * 2 - CD186x_NFIFO;
1057         port->wakeup_chars = (tmp < 0) ? 0 : ((tmp >= SERIAL_XMIT_SIZE) ?
1058                                               SERIAL_XMIT_SIZE - 1 : tmp);
1059
1060         /* Receiver timeout will be transmission time for 1.5 chars */
1061         tmp = (SPECIALIX_TPS + SPECIALIX_TPS/2 + baud/2) / baud;
1062         tmp = (tmp > 0xff) ? 0xff : tmp;
1063         spin_lock_irqsave(&bp->lock, flags);
1064         sx_out(bp, CD186x_RTPR, tmp);
1065         spin_unlock_irqrestore(&bp->lock, flags);
1066         switch (C_CSIZE(tty)) {
1067         case CS5:
1068                 cor1 |= COR1_5BITS;
1069                 break;
1070         case CS6:
1071                 cor1 |= COR1_6BITS;
1072                 break;
1073         case CS7:
1074                 cor1 |= COR1_7BITS;
1075                 break;
1076         case CS8:
1077                 cor1 |= COR1_8BITS;
1078                 break;
1079         }
1080
1081         if (C_CSTOPB(tty))
1082                 cor1 |= COR1_2SB;
1083
1084         cor1 |= COR1_IGNORE;
1085         if (C_PARENB(tty)) {
1086                 cor1 |= COR1_NORMPAR;
1087                 if (C_PARODD(tty))
1088                         cor1 |= COR1_ODDP;
1089                 if (I_INPCK(tty))
1090                         cor1 &= ~COR1_IGNORE;
1091         }
1092         /* Set marking of some errors */
1093         port->mark_mask = RCSR_OE | RCSR_TOUT;
1094         if (I_INPCK(tty))
1095                 port->mark_mask |= RCSR_FE | RCSR_PE;
1096         if (I_BRKINT(tty) || I_PARMRK(tty))
1097                 port->mark_mask |= RCSR_BREAK;
1098         if (I_IGNPAR(tty))
1099                 port->mark_mask &= ~(RCSR_FE | RCSR_PE);
1100         if (I_IGNBRK(tty)) {
1101                 port->mark_mask &= ~RCSR_BREAK;
1102                 if (I_IGNPAR(tty))
1103                         /* Real raw mode. Ignore all */
1104                         port->mark_mask &= ~RCSR_OE;
1105         }
1106         /* Enable Hardware Flow Control */
1107         if (C_CRTSCTS(tty)) {
1108 #ifdef SPECIALIX_BRAIN_DAMAGED_CTS
1109                 port->IER |= IER_DSR | IER_CTS;
1110                 mcor1 |= MCOR1_DSRZD | MCOR1_CTSZD;
1111                 mcor2 |= MCOR2_DSROD | MCOR2_CTSOD;
1112                 spin_lock_irqsave(&bp->lock, flags);
1113                 tty->hw_stopped = !(sx_in(bp, CD186x_MSVR) &
1114                                                         (MSVR_CTS|MSVR_DSR));
1115                 spin_unlock_irqrestore(&bp->lock, flags);
1116 #else
1117                 port->COR2 |= COR2_CTSAE;
1118 #endif
1119         }
1120         /* Enable Software Flow Control. FIXME: I'm not sure about this */
1121         /* Some people reported that it works, but I still doubt it */
1122         if (I_IXON(tty)) {
1123                 port->COR2 |= COR2_TXIBE;
1124                 cor3 |= (COR3_FCT | COR3_SCDE);
1125                 if (I_IXANY(tty))
1126                         port->COR2 |= COR2_IXM;
1127                 spin_lock_irqsave(&bp->lock, flags);
1128                 sx_out(bp, CD186x_SCHR1, START_CHAR(tty));
1129                 sx_out(bp, CD186x_SCHR2, STOP_CHAR(tty));
1130                 sx_out(bp, CD186x_SCHR3, START_CHAR(tty));
1131                 sx_out(bp, CD186x_SCHR4, STOP_CHAR(tty));
1132                 spin_unlock_irqrestore(&bp->lock, flags);
1133         }
1134         if (!C_CLOCAL(tty)) {
1135                 /* Enable CD check */
1136                 port->IER |= IER_CD;
1137                 mcor1 |= MCOR1_CDZD;
1138                 mcor2 |= MCOR2_CDOD;
1139         }
1140
1141         if (C_CREAD(tty))
1142                 /* Enable receiver */
1143                 port->IER |= IER_RXD;
1144
1145         /* Set input FIFO size (1-8 bytes) */
1146         cor3 |= sx_rxfifo;
1147         /* Setting up CD186x channel registers */
1148         spin_lock_irqsave(&bp->lock, flags);
1149         sx_out(bp, CD186x_COR1, cor1);
1150         sx_out(bp, CD186x_COR2, port->COR2);
1151         sx_out(bp, CD186x_COR3, cor3);
1152         spin_unlock_irqrestore(&bp->lock, flags);
1153         /* Make CD186x know about registers change */
1154         sx_wait_CCR(bp);
1155         spin_lock_irqsave(&bp->lock, flags);
1156         sx_out(bp, CD186x_CCR, CCR_CORCHG1 | CCR_CORCHG2 | CCR_CORCHG3);
1157         /* Setting up modem option registers */
1158         dprintk(SX_DEBUG_TERMIOS, "Mcor1 = %02x, mcor2 = %02x.\n",
1159                                                                 mcor1, mcor2);
1160         sx_out(bp, CD186x_MCOR1, mcor1);
1161         sx_out(bp, CD186x_MCOR2, mcor2);
1162         spin_unlock_irqrestore(&bp->lock, flags);
1163         /* Enable CD186x transmitter & receiver */
1164         sx_wait_CCR(bp);
1165         spin_lock_irqsave(&bp->lock, flags);
1166         sx_out(bp, CD186x_CCR, CCR_TXEN | CCR_RXEN);
1167         /* Enable interrupts */
1168         sx_out(bp, CD186x_IER, port->IER);
1169         /* And finally set the modem lines... */
1170         sx_out(bp, CD186x_MSVR, port->MSVR);
1171         spin_unlock_irqrestore(&bp->lock, flags);
1172
1173         func_exit();
1174 }
1175
1176
1177 /* Must be called with interrupts enabled */
1178 static int sx_setup_port(struct specialix_board *bp,
1179                                                 struct specialix_port *port)
1180 {
1181         unsigned long flags;
1182
1183         func_enter();
1184
1185         if (port->port.flags & ASYNC_INITIALIZED) {
1186                 func_exit();
1187                 return 0;
1188         }
1189
1190         if (!port->xmit_buf) {
1191                 /* We may sleep in get_zeroed_page() */
1192                 unsigned long tmp;
1193
1194                 tmp = get_zeroed_page(GFP_KERNEL);
1195                 if (tmp == 0L) {
1196                         func_exit();
1197                         return -ENOMEM;
1198                 }
1199
1200                 if (port->xmit_buf) {
1201                         free_page(tmp);
1202                         func_exit();
1203                         return -ERESTARTSYS;
1204                 }
1205                 port->xmit_buf = (unsigned char *) tmp;
1206         }
1207
1208         spin_lock_irqsave(&port->lock, flags);
1209
1210         if (port->port.tty)
1211                 clear_bit(TTY_IO_ERROR, &port->port.tty->flags);
1212
1213         port->xmit_cnt = port->xmit_head = port->xmit_tail = 0;
1214         sx_change_speed(bp, port);
1215         port->port.flags |= ASYNC_INITIALIZED;
1216
1217         spin_unlock_irqrestore(&port->lock, flags);
1218
1219
1220         func_exit();
1221         return 0;
1222 }
1223
1224
1225 /* Must be called with interrupts disabled */
1226 static void sx_shutdown_port(struct specialix_board *bp,
1227                                                 struct specialix_port *port)
1228 {
1229         struct tty_struct *tty;
1230         int i;
1231         unsigned long flags;
1232
1233         func_enter();
1234
1235         if (!(port->port.flags & ASYNC_INITIALIZED)) {
1236                 func_exit();
1237                 return;
1238         }
1239
1240         if (sx_debug & SX_DEBUG_FIFO) {
1241                 dprintk(SX_DEBUG_FIFO,
1242                         "sx%d: port %d: %ld overruns, FIFO hits [ ",
1243                                 board_No(bp), port_No(port), port->overrun);
1244                 for (i = 0; i < 10; i++)
1245                         dprintk(SX_DEBUG_FIFO, "%ld ", port->hits[i]);
1246                 dprintk(SX_DEBUG_FIFO, "].\n");
1247         }
1248
1249         if (port->xmit_buf) {
1250                 free_page((unsigned long) port->xmit_buf);
1251                 port->xmit_buf = NULL;
1252         }
1253
1254         /* Select port */
1255         spin_lock_irqsave(&bp->lock, flags);
1256         sx_out(bp, CD186x_CAR, port_No(port));
1257
1258         tty = port->port.tty;
1259         if (tty == NULL || C_HUPCL(tty)) {
1260                 /* Drop DTR */
1261                 sx_out(bp, CD186x_MSVDTR, 0);
1262         }
1263         spin_unlock_irqrestore(&bp->lock, flags);
1264         /* Reset port */
1265         sx_wait_CCR(bp);
1266         spin_lock_irqsave(&bp->lock, flags);
1267         sx_out(bp, CD186x_CCR, CCR_SOFTRESET);
1268         /* Disable all interrupts from this port */
1269         port->IER = 0;
1270         sx_out(bp, CD186x_IER, port->IER);
1271         spin_unlock_irqrestore(&bp->lock, flags);
1272         if (tty)
1273                 set_bit(TTY_IO_ERROR, &tty->flags);
1274         port->port.flags &= ~ASYNC_INITIALIZED;
1275
1276         if (!bp->count)
1277                 sx_shutdown_board(bp);
1278         func_exit();
1279 }
1280
1281
1282 static int block_til_ready(struct tty_struct *tty, struct file *filp,
1283                                                 struct specialix_port *port)
1284 {
1285         DECLARE_WAITQUEUE(wait,  current);
1286         struct specialix_board *bp = port_Board(port);
1287         int    retval;
1288         int    do_clocal = 0;
1289         int    CD;
1290         unsigned long flags;
1291
1292         func_enter();
1293
1294         /*
1295          * If the device is in the middle of being closed, then block
1296          * until it's done, and then try again.
1297          */
1298         if (tty_hung_up_p(filp) || port->port.flags & ASYNC_CLOSING) {
1299                 interruptible_sleep_on(&port->port.close_wait);
1300                 if (port->port.flags & ASYNC_HUP_NOTIFY) {
1301                         func_exit();
1302                         return -EAGAIN;
1303                 } else {
1304                         func_exit();
1305                         return -ERESTARTSYS;
1306                 }
1307         }
1308
1309         /*
1310          * If non-blocking mode is set, or the port is not enabled,
1311          * then make the check up front and then exit.
1312          */
1313         if ((filp->f_flags & O_NONBLOCK) ||
1314             (tty->flags & (1 << TTY_IO_ERROR))) {
1315                 port->port.flags |= ASYNC_NORMAL_ACTIVE;
1316                 func_exit();
1317                 return 0;
1318         }
1319
1320         if (C_CLOCAL(tty))
1321                 do_clocal = 1;
1322
1323         /*
1324          * Block waiting for the carrier detect and the line to become
1325          * free (i.e., not in use by the callout).  While we are in
1326          * this loop, info->count is dropped by one, so that
1327          * rs_close() knows when to free things.  We restore it upon
1328          * exit, either normal or abnormal.
1329          */
1330         retval = 0;
1331         add_wait_queue(&port->port.open_wait, &wait);
1332         spin_lock_irqsave(&port->lock, flags);
1333         if (!tty_hung_up_p(filp))
1334                 port->port.count--;
1335         spin_unlock_irqrestore(&port->lock, flags);
1336         port->port.blocked_open++;
1337         while (1) {
1338                 spin_lock_irqsave(&bp->lock, flags);
1339                 sx_out(bp, CD186x_CAR, port_No(port));
1340                 CD = sx_in(bp, CD186x_MSVR) & MSVR_CD;
1341                 if (sx_crtscts(tty)) {
1342                         /* Activate RTS */
1343                         port->MSVR |= MSVR_DTR;         /* WTF? */
1344                         sx_out(bp, CD186x_MSVR, port->MSVR);
1345                 } else {
1346                         /* Activate DTR */
1347                         port->MSVR |= MSVR_DTR;
1348                         sx_out(bp, CD186x_MSVR, port->MSVR);
1349                 }
1350                 spin_unlock_irqrestore(&bp->lock, flags);
1351                 set_current_state(TASK_INTERRUPTIBLE);
1352                 if (tty_hung_up_p(filp) ||
1353                     !(port->port.flags & ASYNC_INITIALIZED)) {
1354                         if (port->port.flags & ASYNC_HUP_NOTIFY)
1355                                 retval = -EAGAIN;
1356                         else
1357                                 retval = -ERESTARTSYS;
1358                         break;
1359                 }
1360                 if (!(port->port.flags & ASYNC_CLOSING) &&
1361                     (do_clocal || CD))
1362                         break;
1363                 if (signal_pending(current)) {
1364                         retval = -ERESTARTSYS;
1365                         break;
1366                 }
1367                 tty_unlock();
1368                 schedule();
1369                 tty_lock();
1370         }
1371
1372         set_current_state(TASK_RUNNING);
1373         remove_wait_queue(&port->port.open_wait, &wait);
1374         spin_lock_irqsave(&port->lock, flags);
1375         if (!tty_hung_up_p(filp))
1376                 port->port.count++;
1377         port->port.blocked_open--;
1378         spin_unlock_irqrestore(&port->lock, flags);
1379         if (retval) {
1380                 func_exit();
1381                 return retval;
1382         }
1383
1384         port->port.flags |= ASYNC_NORMAL_ACTIVE;
1385         func_exit();
1386         return 0;
1387 }
1388
1389
1390 static int sx_open(struct tty_struct *tty, struct file *filp)
1391 {
1392         int board;
1393         int error;
1394         struct specialix_port *port;
1395         struct specialix_board *bp;
1396         int i;
1397         unsigned long flags;
1398
1399         func_enter();
1400
1401         board = SX_BOARD(tty->index);
1402
1403         if (board >= SX_NBOARD || !(sx_board[board].flags & SX_BOARD_PRESENT)) {
1404                 func_exit();
1405                 return -ENODEV;
1406         }
1407
1408         bp = &sx_board[board];
1409         port = sx_port + board * SX_NPORT + SX_PORT(tty->index);
1410         port->overrun = 0;
1411         for (i = 0; i < 10; i++)
1412                 port->hits[i] = 0;
1413
1414         dprintk(SX_DEBUG_OPEN,
1415                         "Board = %d, bp = %p, port = %p, portno = %d.\n",
1416                                  board, bp, port, SX_PORT(tty->index));
1417
1418         if (sx_paranoia_check(port, tty->name, "sx_open")) {
1419                 func_exit();
1420                 return -ENODEV;
1421         }
1422
1423         error = sx_setup_board(bp);
1424         if (error) {
1425                 func_exit();
1426                 return error;
1427         }
1428
1429         spin_lock_irqsave(&bp->lock, flags);
1430         port->port.count++;
1431         bp->count++;
1432         tty->driver_data = port;
1433         port->port.tty = tty;
1434         spin_unlock_irqrestore(&bp->lock, flags);
1435
1436         error = sx_setup_port(bp, port);
1437         if (error) {
1438                 func_exit();
1439                 return error;
1440         }
1441
1442         error = block_til_ready(tty, filp, port);
1443         if (error) {
1444                 func_exit();
1445                 return error;
1446         }
1447
1448         func_exit();
1449         return 0;
1450 }
1451
1452 static void sx_flush_buffer(struct tty_struct *tty)
1453 {
1454         struct specialix_port *port = tty->driver_data;
1455         unsigned long flags;
1456         struct specialix_board  *bp;
1457
1458         func_enter();
1459
1460         if (sx_paranoia_check(port, tty->name, "sx_flush_buffer")) {
1461                 func_exit();
1462                 return;
1463         }
1464
1465         bp = port_Board(port);
1466         spin_lock_irqsave(&port->lock, flags);
1467         port->xmit_cnt = port->xmit_head = port->xmit_tail = 0;
1468         spin_unlock_irqrestore(&port->lock, flags);
1469         tty_wakeup(tty);
1470
1471         func_exit();
1472 }
1473
1474 static void sx_close(struct tty_struct *tty, struct file *filp)
1475 {
1476         struct specialix_port *port = tty->driver_data;
1477         struct specialix_board *bp;
1478         unsigned long flags;
1479         unsigned long timeout;
1480
1481         func_enter();
1482         if (!port || sx_paranoia_check(port, tty->name, "close")) {
1483                 func_exit();
1484                 return;
1485         }
1486         spin_lock_irqsave(&port->lock, flags);
1487
1488         if (tty_hung_up_p(filp)) {
1489                 spin_unlock_irqrestore(&port->lock, flags);
1490                 func_exit();
1491                 return;
1492         }
1493
1494         bp = port_Board(port);
1495         if (tty->count == 1 && port->port.count != 1) {
1496                 printk(KERN_ERR "sx%d: sx_close: bad port count;"
1497                        " tty->count is 1, port count is %d\n",
1498                        board_No(bp), port->port.count);
1499                 port->port.count = 1;
1500         }
1501
1502         if (port->port.count > 1) {
1503                 port->port.count--;
1504                 bp->count--;
1505
1506                 spin_unlock_irqrestore(&port->lock, flags);
1507
1508                 func_exit();
1509                 return;
1510         }
1511         port->port.flags |= ASYNC_CLOSING;
1512         /*
1513          * Now we wait for the transmit buffer to clear; and we notify
1514          * the line discipline to only process XON/XOFF characters.
1515          */
1516         tty->closing = 1;
1517         spin_unlock_irqrestore(&port->lock, flags);
1518         dprintk(SX_DEBUG_OPEN, "Closing\n");
1519         if (port->port.closing_wait != ASYNC_CLOSING_WAIT_NONE)
1520                 tty_wait_until_sent(tty, port->port.closing_wait);
1521         /*
1522          * At this point we stop accepting input.  To do this, we
1523          * disable the receive line status interrupts, and tell the
1524          * interrupt driver to stop checking the data ready bit in the
1525          * line status register.
1526          */
1527         dprintk(SX_DEBUG_OPEN, "Closed\n");
1528         port->IER &= ~IER_RXD;
1529         if (port->port.flags & ASYNC_INITIALIZED) {
1530                 port->IER &= ~IER_TXRDY;
1531                 port->IER |= IER_TXEMPTY;
1532                 spin_lock_irqsave(&bp->lock, flags);
1533                 sx_out(bp, CD186x_CAR, port_No(port));
1534                 sx_out(bp, CD186x_IER, port->IER);
1535                 spin_unlock_irqrestore(&bp->lock, flags);
1536                 /*
1537                  * Before we drop DTR, make sure the UART transmitter
1538                  * has completely drained; this is especially
1539                  * important if there is a transmit FIFO!
1540                  */
1541                 timeout = jiffies+HZ;
1542                 while (port->IER & IER_TXEMPTY) {
1543                         set_current_state(TASK_INTERRUPTIBLE);
1544                         msleep_interruptible(jiffies_to_msecs(port->timeout));
1545                         if (time_after(jiffies, timeout)) {
1546                                 printk(KERN_INFO "Timeout waiting for close\n");
1547                                 break;
1548                         }
1549                 }
1550
1551         }
1552
1553         if (--bp->count < 0) {
1554                 printk(KERN_ERR
1555                     "sx%d: sx_shutdown_port: bad board count: %d port: %d\n",
1556                                 board_No(bp), bp->count, tty->index);
1557                 bp->count = 0;
1558         }
1559         if (--port->port.count < 0) {
1560                 printk(KERN_ERR
1561                         "sx%d: sx_close: bad port count for tty%d: %d\n",
1562                                 board_No(bp), port_No(port), port->port.count);
1563                 port->port.count = 0;
1564         }
1565
1566         sx_shutdown_port(bp, port);
1567         sx_flush_buffer(tty);
1568         tty_ldisc_flush(tty);
1569         spin_lock_irqsave(&port->lock, flags);
1570         tty->closing = 0;
1571         port->port.tty = NULL;
1572         spin_unlock_irqrestore(&port->lock, flags);
1573         if (port->port.blocked_open) {
1574                 if (port->port.close_delay)
1575                         msleep_interruptible(
1576                                 jiffies_to_msecs(port->port.close_delay));
1577                 wake_up_interruptible(&port->port.open_wait);
1578         }
1579         port->port.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
1580         wake_up_interruptible(&port->port.close_wait);
1581
1582         func_exit();
1583 }
1584
1585
1586 static int sx_write(struct tty_struct *tty,
1587                                         const unsigned char *buf, int count)
1588 {
1589         struct specialix_port *port = tty->driver_data;
1590         struct specialix_board *bp;
1591         int c, total = 0;
1592         unsigned long flags;
1593
1594         func_enter();
1595         if (sx_paranoia_check(port, tty->name, "sx_write")) {
1596                 func_exit();
1597                 return 0;
1598         }
1599
1600         bp = port_Board(port);
1601
1602         if (!port->xmit_buf) {
1603                 func_exit();
1604                 return 0;
1605         }
1606
1607         while (1) {
1608                 spin_lock_irqsave(&port->lock, flags);
1609                 c = min_t(int, count, min(SERIAL_XMIT_SIZE - port->xmit_cnt - 1,
1610                                    SERIAL_XMIT_SIZE - port->xmit_head));
1611                 if (c <= 0) {
1612                         spin_unlock_irqrestore(&port->lock, flags);
1613                         break;
1614                 }
1615                 memcpy(port->xmit_buf + port->xmit_head, buf, c);
1616                 port->xmit_head = (port->xmit_head + c) & (SERIAL_XMIT_SIZE-1);
1617                 port->xmit_cnt += c;
1618                 spin_unlock_irqrestore(&port->lock, flags);
1619
1620                 buf += c;
1621                 count -= c;
1622                 total += c;
1623         }
1624
1625         spin_lock_irqsave(&bp->lock, flags);
1626         if (port->xmit_cnt && !tty->stopped && !tty->hw_stopped &&
1627             !(port->IER & IER_TXRDY)) {
1628                 port->IER |= IER_TXRDY;
1629                 sx_out(bp, CD186x_CAR, port_No(port));
1630                 sx_out(bp, CD186x_IER, port->IER);
1631         }
1632         spin_unlock_irqrestore(&bp->lock, flags);
1633         func_exit();
1634
1635         return total;
1636 }
1637
1638
1639 static int sx_put_char(struct tty_struct *tty, unsigned char ch)
1640 {
1641         struct specialix_port *port = tty->driver_data;
1642         unsigned long flags;
1643         struct specialix_board  *bp;
1644
1645         func_enter();
1646
1647         if (sx_paranoia_check(port, tty->name, "sx_put_char")) {
1648                 func_exit();
1649                 return 0;
1650         }
1651         dprintk(SX_DEBUG_TX, "check tty: %p %p\n", tty, port->xmit_buf);
1652         if (!port->xmit_buf) {
1653                 func_exit();
1654                 return 0;
1655         }
1656         bp = port_Board(port);
1657         spin_lock_irqsave(&port->lock, flags);
1658
1659         dprintk(SX_DEBUG_TX, "xmit_cnt: %d xmit_buf: %p\n",
1660                                         port->xmit_cnt, port->xmit_buf);
1661         if (port->xmit_cnt >= SERIAL_XMIT_SIZE - 1 || !port->xmit_buf) {
1662                 spin_unlock_irqrestore(&port->lock, flags);
1663                 dprintk(SX_DEBUG_TX, "Exit size\n");
1664                 func_exit();
1665                 return 0;
1666         }
1667         dprintk(SX_DEBUG_TX, "Handle xmit: %p %p\n", port, port->xmit_buf);
1668         port->xmit_buf[port->xmit_head++] = ch;
1669         port->xmit_head &= SERIAL_XMIT_SIZE - 1;
1670         port->xmit_cnt++;
1671         spin_unlock_irqrestore(&port->lock, flags);
1672
1673         func_exit();
1674         return 1;
1675 }
1676
1677
1678 static void sx_flush_chars(struct tty_struct *tty)
1679 {
1680         struct specialix_port *port = tty->driver_data;
1681         unsigned long flags;
1682         struct specialix_board  *bp = port_Board(port);
1683
1684         func_enter();
1685
1686         if (sx_paranoia_check(port, tty->name, "sx_flush_chars")) {
1687                 func_exit();
1688                 return;
1689         }
1690         if (port->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped ||
1691             !port->xmit_buf) {
1692                 func_exit();
1693                 return;
1694         }
1695         spin_lock_irqsave(&bp->lock, flags);
1696         port->IER |= IER_TXRDY;
1697         sx_out(port_Board(port), CD186x_CAR, port_No(port));
1698         sx_out(port_Board(port), CD186x_IER, port->IER);
1699         spin_unlock_irqrestore(&bp->lock, flags);
1700
1701         func_exit();
1702 }
1703
1704
1705 static int sx_write_room(struct tty_struct *tty)
1706 {
1707         struct specialix_port *port = tty->driver_data;
1708         int     ret;
1709
1710         func_enter();
1711
1712         if (sx_paranoia_check(port, tty->name, "sx_write_room")) {
1713                 func_exit();
1714                 return 0;
1715         }
1716
1717         ret = SERIAL_XMIT_SIZE - port->xmit_cnt - 1;
1718         if (ret < 0)
1719                 ret = 0;
1720
1721         func_exit();
1722         return ret;
1723 }
1724
1725
1726 static int sx_chars_in_buffer(struct tty_struct *tty)
1727 {
1728         struct specialix_port *port = tty->driver_data;
1729
1730         func_enter();
1731
1732         if (sx_paranoia_check(port, tty->name, "sx_chars_in_buffer")) {
1733                 func_exit();
1734                 return 0;
1735         }
1736         func_exit();
1737         return port->xmit_cnt;
1738 }
1739
1740 static int sx_tiocmget(struct tty_struct *tty)
1741 {
1742         struct specialix_port *port = tty->driver_data;
1743         struct specialix_board *bp;
1744         unsigned char status;
1745         unsigned int result;
1746         unsigned long flags;
1747
1748         func_enter();
1749
1750         if (sx_paranoia_check(port, tty->name, __func__)) {
1751                 func_exit();
1752                 return -ENODEV;
1753         }
1754
1755         bp = port_Board(port);
1756         spin_lock_irqsave(&bp->lock, flags);
1757         sx_out(bp, CD186x_CAR, port_No(port));
1758         status = sx_in(bp, CD186x_MSVR);
1759         spin_unlock_irqrestore(&bp->lock, flags);
1760         dprintk(SX_DEBUG_INIT, "Got msvr[%d] = %02x, car = %d.\n",
1761                         port_No(port), status, sx_in(bp, CD186x_CAR));
1762         dprintk(SX_DEBUG_INIT, "sx_port = %p, port = %p\n", sx_port, port);
1763         if (sx_crtscts(port->port.tty)) {
1764                 result  = TIOCM_DTR | TIOCM_DSR
1765                           |   ((status & MSVR_DTR) ? TIOCM_RTS : 0)
1766                           |   ((status & MSVR_CD)  ? TIOCM_CAR : 0)
1767                           |   ((status & MSVR_CTS) ? TIOCM_CTS : 0);
1768         } else {
1769                 result  = TIOCM_RTS | TIOCM_DSR
1770                           |   ((status & MSVR_DTR) ? TIOCM_DTR : 0)
1771                           |   ((status & MSVR_CD)  ? TIOCM_CAR : 0)
1772                           |   ((status & MSVR_CTS) ? TIOCM_CTS : 0);
1773         }
1774
1775         func_exit();
1776
1777         return result;
1778 }
1779
1780
1781 static int sx_tiocmset(struct tty_struct *tty,
1782                        unsigned int set, unsigned int clear)
1783 {
1784         struct specialix_port *port = tty->driver_data;
1785         unsigned long flags;
1786         struct specialix_board *bp;
1787
1788         func_enter();
1789
1790         if (sx_paranoia_check(port, tty->name, __func__)) {
1791                 func_exit();
1792                 return -ENODEV;
1793         }
1794
1795         bp = port_Board(port);
1796
1797         spin_lock_irqsave(&port->lock, flags);
1798         if (sx_crtscts(port->port.tty)) {
1799                 if (set & TIOCM_RTS)
1800                         port->MSVR |= MSVR_DTR;
1801         } else {
1802                 if (set & TIOCM_DTR)
1803                         port->MSVR |= MSVR_DTR;
1804         }
1805         if (sx_crtscts(port->port.tty)) {
1806                 if (clear & TIOCM_RTS)
1807                         port->MSVR &= ~MSVR_DTR;
1808         } else {
1809                 if (clear & TIOCM_DTR)
1810                         port->MSVR &= ~MSVR_DTR;
1811         }
1812         spin_lock(&bp->lock);
1813         sx_out(bp, CD186x_CAR, port_No(port));
1814         sx_out(bp, CD186x_MSVR, port->MSVR);
1815         spin_unlock(&bp->lock);
1816         spin_unlock_irqrestore(&port->lock, flags);
1817         func_exit();
1818         return 0;
1819 }
1820
1821
1822 static int sx_send_break(struct tty_struct *tty, int length)
1823 {
1824         struct specialix_port *port = tty->driver_data;
1825         struct specialix_board *bp = port_Board(port);
1826         unsigned long flags;
1827
1828         func_enter();
1829         if (length == 0 || length == -1)
1830                 return -EOPNOTSUPP;
1831
1832         spin_lock_irqsave(&port->lock, flags);
1833         port->break_length = SPECIALIX_TPS / HZ * length;
1834         port->COR2 |= COR2_ETC;
1835         port->IER  |= IER_TXRDY;
1836         spin_lock(&bp->lock);
1837         sx_out(bp, CD186x_CAR, port_No(port));
1838         sx_out(bp, CD186x_COR2, port->COR2);
1839         sx_out(bp, CD186x_IER, port->IER);
1840         spin_unlock(&bp->lock);
1841         spin_unlock_irqrestore(&port->lock, flags);
1842         sx_wait_CCR(bp);
1843         spin_lock_irqsave(&bp->lock, flags);
1844         sx_out(bp, CD186x_CCR, CCR_CORCHG2);
1845         spin_unlock_irqrestore(&bp->lock, flags);
1846         sx_wait_CCR(bp);
1847
1848         func_exit();
1849         return 0;
1850 }
1851
1852
1853 static int sx_set_serial_info(struct specialix_port *port,
1854                                         struct serial_struct __user *newinfo)
1855 {
1856         struct serial_struct tmp;
1857         struct specialix_board *bp = port_Board(port);
1858         int change_speed;
1859
1860         func_enter();
1861
1862         if (copy_from_user(&tmp, newinfo, sizeof(tmp))) {
1863                 func_exit();
1864                 return -EFAULT;
1865         }
1866
1867         mutex_lock(&port->port.mutex);
1868         change_speed = ((port->port.flags & ASYNC_SPD_MASK) !=
1869                         (tmp.flags & ASYNC_SPD_MASK));
1870         change_speed |= (tmp.custom_divisor != port->custom_divisor);
1871
1872         if (!capable(CAP_SYS_ADMIN)) {
1873                 if ((tmp.close_delay != port->port.close_delay) ||
1874                     (tmp.closing_wait != port->port.closing_wait) ||
1875                     ((tmp.flags & ~ASYNC_USR_MASK) !=
1876                      (port->port.flags & ~ASYNC_USR_MASK))) {
1877                         func_exit();
1878                         mutex_unlock(&port->port.mutex);
1879                         return -EPERM;
1880                 }
1881                 port->port.flags = ((port->port.flags & ~ASYNC_USR_MASK) |
1882                                                 (tmp.flags & ASYNC_USR_MASK));
1883                 port->custom_divisor = tmp.custom_divisor;
1884         } else {
1885                 port->port.flags = ((port->port.flags & ~ASYNC_FLAGS) |
1886                                                 (tmp.flags & ASYNC_FLAGS));
1887                 port->port.close_delay = tmp.close_delay;
1888                 port->port.closing_wait = tmp.closing_wait;
1889                 port->custom_divisor = tmp.custom_divisor;
1890         }
1891         if (change_speed)
1892                 sx_change_speed(bp, port);
1893
1894         func_exit();
1895         mutex_unlock(&port->port.mutex);
1896         return 0;
1897 }
1898
1899
1900 static int sx_get_serial_info(struct specialix_port *port,
1901                                      struct serial_struct __user *retinfo)
1902 {
1903         struct serial_struct tmp;
1904         struct specialix_board *bp = port_Board(port);
1905
1906         func_enter();
1907
1908         memset(&tmp, 0, sizeof(tmp));
1909         mutex_lock(&port->port.mutex);
1910         tmp.type = PORT_CIRRUS;
1911         tmp.line = port - sx_port;
1912         tmp.port = bp->base;
1913         tmp.irq  = bp->irq;
1914         tmp.flags = port->port.flags;
1915         tmp.baud_base = (SX_OSCFREQ + CD186x_TPC/2) / CD186x_TPC;
1916         tmp.close_delay = port->port.close_delay * HZ/100;
1917         tmp.closing_wait = port->port.closing_wait * HZ/100;
1918         tmp.custom_divisor =  port->custom_divisor;
1919         tmp.xmit_fifo_size = CD186x_NFIFO;
1920         mutex_unlock(&port->port.mutex);
1921         if (copy_to_user(retinfo, &tmp, sizeof(tmp))) {
1922                 func_exit();
1923                 return -EFAULT;
1924         }
1925
1926         func_exit();
1927         return 0;
1928 }
1929
1930
1931 static int sx_ioctl(struct tty_struct *tty,
1932                                 unsigned int cmd, unsigned long arg)
1933 {
1934         struct specialix_port *port = tty->driver_data;
1935         void __user *argp = (void __user *)arg;
1936
1937         func_enter();
1938
1939         if (sx_paranoia_check(port, tty->name, "sx_ioctl")) {
1940                 func_exit();
1941                 return -ENODEV;
1942         }
1943
1944         switch (cmd) {
1945         case TIOCGSERIAL:
1946                 func_exit();
1947                 return sx_get_serial_info(port, argp);
1948         case TIOCSSERIAL:
1949                 func_exit();
1950                 return sx_set_serial_info(port, argp);
1951         default:
1952                 func_exit();
1953                 return -ENOIOCTLCMD;
1954         }
1955         func_exit();
1956         return 0;
1957 }
1958
1959
1960 static void sx_throttle(struct tty_struct *tty)
1961 {
1962         struct specialix_port *port = tty->driver_data;
1963         struct specialix_board *bp;
1964         unsigned long flags;
1965
1966         func_enter();
1967
1968         if (sx_paranoia_check(port, tty->name, "sx_throttle")) {
1969                 func_exit();
1970                 return;
1971         }
1972
1973         bp = port_Board(port);
1974
1975         /* Use DTR instead of RTS ! */
1976         if (sx_crtscts(tty))
1977                 port->MSVR &= ~MSVR_DTR;
1978         else {
1979                 /* Auch!!! I think the system shouldn't call this then. */
1980                 /* Or maybe we're supposed (allowed?) to do our side of hw
1981                    handshake anyway, even when hardware handshake is off.
1982                    When you see this in your logs, please report.... */
1983                 printk(KERN_ERR
1984                    "sx%d: Need to throttle, but can't (hardware hs is off)\n",
1985                                                         port_No(port));
1986         }
1987         spin_lock_irqsave(&bp->lock, flags);
1988         sx_out(bp, CD186x_CAR, port_No(port));
1989         spin_unlock_irqrestore(&bp->lock, flags);
1990         if (I_IXOFF(tty)) {
1991                 sx_wait_CCR(bp);
1992                 spin_lock_irqsave(&bp->lock, flags);
1993                 sx_out(bp, CD186x_CCR, CCR_SSCH2);
1994                 spin_unlock_irqrestore(&bp->lock, flags);
1995                 sx_wait_CCR(bp);
1996         }
1997         spin_lock_irqsave(&bp->lock, flags);
1998         sx_out(bp, CD186x_MSVR, port->MSVR);
1999         spin_unlock_irqrestore(&bp->lock, flags);
2000
2001         func_exit();
2002 }
2003
2004
2005 static void sx_unthrottle(struct tty_struct *tty)
2006 {
2007         struct specialix_port *port = tty->driver_data;
2008         struct specialix_board *bp;
2009         unsigned long flags;
2010
2011         func_enter();
2012
2013         if (sx_paranoia_check(port, tty->name, "sx_unthrottle")) {
2014                 func_exit();
2015                 return;
2016         }
2017
2018         bp = port_Board(port);
2019
2020         spin_lock_irqsave(&port->lock, flags);
2021         /* XXXX Use DTR INSTEAD???? */
2022         if (sx_crtscts(tty))
2023                 port->MSVR |= MSVR_DTR;
2024         /* Else clause: see remark in "sx_throttle"... */
2025         spin_lock(&bp->lock);
2026         sx_out(bp, CD186x_CAR, port_No(port));
2027         spin_unlock(&bp->lock);
2028         if (I_IXOFF(tty)) {
2029                 spin_unlock_irqrestore(&port->lock, flags);
2030                 sx_wait_CCR(bp);
2031                 spin_lock_irqsave(&bp->lock, flags);
2032                 sx_out(bp, CD186x_CCR, CCR_SSCH1);
2033                 spin_unlock_irqrestore(&bp->lock, flags);
2034                 sx_wait_CCR(bp);
2035                 spin_lock_irqsave(&port->lock, flags);
2036         }
2037         spin_lock(&bp->lock);
2038         sx_out(bp, CD186x_MSVR, port->MSVR);
2039         spin_unlock(&bp->lock);
2040         spin_unlock_irqrestore(&port->lock, flags);
2041
2042         func_exit();
2043 }
2044
2045
2046 static void sx_stop(struct tty_struct *tty)
2047 {
2048         struct specialix_port *port = tty->driver_data;
2049         struct specialix_board *bp;
2050         unsigned long flags;
2051
2052         func_enter();
2053
2054         if (sx_paranoia_check(port, tty->name, "sx_stop")) {
2055                 func_exit();
2056                 return;
2057         }
2058
2059         bp = port_Board(port);
2060
2061         spin_lock_irqsave(&port->lock, flags);
2062         port->IER &= ~IER_TXRDY;
2063         spin_lock(&bp->lock);
2064         sx_out(bp, CD186x_CAR, port_No(port));
2065         sx_out(bp, CD186x_IER, port->IER);
2066         spin_unlock(&bp->lock);
2067         spin_unlock_irqrestore(&port->lock, flags);
2068
2069         func_exit();
2070 }
2071
2072
2073 static void sx_start(struct tty_struct *tty)
2074 {
2075         struct specialix_port *port = tty->driver_data;
2076         struct specialix_board *bp;
2077         unsigned long flags;
2078
2079         func_enter();
2080
2081         if (sx_paranoia_check(port, tty->name, "sx_start")) {
2082                 func_exit();
2083                 return;
2084         }
2085
2086         bp = port_Board(port);
2087
2088         spin_lock_irqsave(&port->lock, flags);
2089         if (port->xmit_cnt && port->xmit_buf && !(port->IER & IER_TXRDY)) {
2090                 port->IER |= IER_TXRDY;
2091                 spin_lock(&bp->lock);
2092                 sx_out(bp, CD186x_CAR, port_No(port));
2093                 sx_out(bp, CD186x_IER, port->IER);
2094                 spin_unlock(&bp->lock);
2095         }
2096         spin_unlock_irqrestore(&port->lock, flags);
2097
2098         func_exit();
2099 }
2100
2101 static void sx_hangup(struct tty_struct *tty)
2102 {
2103         struct specialix_port *port = tty->driver_data;
2104         struct specialix_board *bp;
2105         unsigned long flags;
2106
2107         func_enter();
2108
2109         if (sx_paranoia_check(port, tty->name, "sx_hangup")) {
2110                 func_exit();
2111                 return;
2112         }
2113
2114         bp = port_Board(port);
2115
2116         sx_shutdown_port(bp, port);
2117         spin_lock_irqsave(&port->lock, flags);
2118         bp->count -= port->port.count;
2119         if (bp->count < 0) {
2120                 printk(KERN_ERR
2121                         "sx%d: sx_hangup: bad board count: %d port: %d\n",
2122                                         board_No(bp), bp->count, tty->index);
2123                 bp->count = 0;
2124         }
2125         port->port.count = 0;
2126         port->port.flags &= ~ASYNC_NORMAL_ACTIVE;
2127         port->port.tty = NULL;
2128         spin_unlock_irqrestore(&port->lock, flags);
2129         wake_up_interruptible(&port->port.open_wait);
2130
2131         func_exit();
2132 }
2133
2134
2135 static void sx_set_termios(struct tty_struct *tty,
2136                                         struct ktermios *old_termios)
2137 {
2138         struct specialix_port *port = tty->driver_data;
2139         unsigned long flags;
2140         struct specialix_board  *bp;
2141
2142         if (sx_paranoia_check(port, tty->name, "sx_set_termios"))
2143                 return;
2144
2145         bp = port_Board(port);
2146         spin_lock_irqsave(&port->lock, flags);
2147         sx_change_speed(port_Board(port), port);
2148         spin_unlock_irqrestore(&port->lock, flags);
2149
2150         if ((old_termios->c_cflag & CRTSCTS) &&
2151             !(tty->termios->c_cflag & CRTSCTS)) {
2152                 tty->hw_stopped = 0;
2153                 sx_start(tty);
2154         }
2155 }
2156
2157 static const struct tty_operations sx_ops = {
2158         .open  = sx_open,
2159         .close = sx_close,
2160         .write = sx_write,
2161         .put_char = sx_put_char,
2162         .flush_chars = sx_flush_chars,
2163         .write_room = sx_write_room,
2164         .chars_in_buffer = sx_chars_in_buffer,
2165         .flush_buffer = sx_flush_buffer,
2166         .ioctl = sx_ioctl,
2167         .throttle = sx_throttle,
2168         .unthrottle = sx_unthrottle,
2169         .set_termios = sx_set_termios,
2170         .stop = sx_stop,
2171         .start = sx_start,
2172         .hangup = sx_hangup,
2173         .tiocmget = sx_tiocmget,
2174         .tiocmset = sx_tiocmset,
2175         .break_ctl = sx_send_break,
2176 };
2177
2178 static int sx_init_drivers(void)
2179 {
2180         int error;
2181         int i;
2182
2183         func_enter();
2184
2185         specialix_driver = alloc_tty_driver(SX_NBOARD * SX_NPORT);
2186         if (!specialix_driver) {
2187                 printk(KERN_ERR "sx: Couldn't allocate tty_driver.\n");
2188                 func_exit();
2189                 return 1;
2190         }
2191
2192         specialix_driver->owner = THIS_MODULE;
2193         specialix_driver->name = "ttyW";
2194         specialix_driver->major = SPECIALIX_NORMAL_MAJOR;
2195         specialix_driver->type = TTY_DRIVER_TYPE_SERIAL;
2196         specialix_driver->subtype = SERIAL_TYPE_NORMAL;
2197         specialix_driver->init_termios = tty_std_termios;
2198         specialix_driver->init_termios.c_cflag =
2199                 B9600 | CS8 | CREAD | HUPCL | CLOCAL;
2200         specialix_driver->init_termios.c_ispeed = 9600;
2201         specialix_driver->init_termios.c_ospeed = 9600;
2202         specialix_driver->flags = TTY_DRIVER_REAL_RAW |
2203                                                 TTY_DRIVER_HARDWARE_BREAK;
2204         tty_set_operations(specialix_driver, &sx_ops);
2205
2206         error = tty_register_driver(specialix_driver);
2207         if (error) {
2208                 put_tty_driver(specialix_driver);
2209                 printk(KERN_ERR
2210                   "sx: Couldn't register specialix IO8+ driver, error = %d\n",
2211                                                                 error);
2212                 func_exit();
2213                 return 1;
2214         }
2215         memset(sx_port, 0, sizeof(sx_port));
2216         for (i = 0; i < SX_NPORT * SX_NBOARD; i++) {
2217                 sx_port[i].magic = SPECIALIX_MAGIC;
2218                 tty_port_init(&sx_port[i].port);
2219                 spin_lock_init(&sx_port[i].lock);
2220         }
2221
2222         func_exit();
2223         return 0;
2224 }
2225
2226 static void sx_release_drivers(void)
2227 {
2228         func_enter();
2229
2230         tty_unregister_driver(specialix_driver);
2231         put_tty_driver(specialix_driver);
2232         func_exit();
2233 }
2234
2235 /*
2236  * This routine must be called by kernel at boot time
2237  */
2238 static int __init specialix_init(void)
2239 {
2240         int i;
2241         int found = 0;
2242
2243         func_enter();
2244
2245         printk(KERN_INFO "sx: Specialix IO8+ driver v" VERSION ", (c) R.E.Wolff 1997/1998.\n");
2246         printk(KERN_INFO "sx: derived from work (c) D.Gorodchanin 1994-1996.\n");
2247         if (sx_rtscts)
2248                 printk(KERN_INFO
2249                         "sx: DTR/RTS pin is RTS when CRTSCTS is on.\n");
2250         else
2251                 printk(KERN_INFO "sx: DTR/RTS pin is always RTS.\n");
2252
2253         for (i = 0; i < SX_NBOARD; i++)
2254                 spin_lock_init(&sx_board[i].lock);
2255
2256         if (sx_init_drivers()) {
2257                 func_exit();
2258                 return -EIO;
2259         }
2260
2261         for (i = 0; i < SX_NBOARD; i++)
2262                 if (sx_board[i].base && !sx_probe(&sx_board[i]))
2263                         found++;
2264
2265 #ifdef CONFIG_PCI
2266         {
2267                 struct pci_dev *pdev = NULL;
2268
2269                 i = 0;
2270                 while (i < SX_NBOARD) {
2271                         if (sx_board[i].flags & SX_BOARD_PRESENT) {
2272                                 i++;
2273                                 continue;
2274                         }
2275                         pdev = pci_get_device(PCI_VENDOR_ID_SPECIALIX,
2276                                         PCI_DEVICE_ID_SPECIALIX_IO8, pdev);
2277                         if (!pdev)
2278                                 break;
2279
2280                         if (pci_enable_device(pdev))
2281                                 continue;
2282
2283                         sx_board[i].irq = pdev->irq;
2284
2285                         sx_board[i].base = pci_resource_start(pdev, 2);
2286
2287                         sx_board[i].flags |= SX_BOARD_IS_PCI;
2288                         if (!sx_probe(&sx_board[i]))
2289                                 found++;
2290                 }
2291                 /* May exit pci_get sequence early with lots of boards */
2292                 if (pdev != NULL)
2293                         pci_dev_put(pdev);
2294         }
2295 #endif
2296
2297         if (!found) {
2298                 sx_release_drivers();
2299                 printk(KERN_INFO "sx: No specialix IO8+ boards detected.\n");
2300                 func_exit();
2301                 return -EIO;
2302         }
2303
2304         func_exit();
2305         return 0;
2306 }
2307
2308 static int iobase[SX_NBOARD]  = {0,};
2309 static int irq[SX_NBOARD] = {0,};
2310
2311 module_param_array(iobase, int, NULL, 0);
2312 module_param_array(irq, int, NULL, 0);
2313 module_param(sx_debug, int, 0);
2314 module_param(sx_rtscts, int, 0);
2315 module_param(sx_rxfifo, int, 0);
2316
2317 /*
2318  * You can setup up to 4 boards.
2319  * by specifying "iobase=0xXXX,0xXXX ..." as insmod parameter.
2320  * You should specify the IRQs too in that case "irq=....,...".
2321  *
2322  * More than 4 boards in one computer is not possible, as the card can
2323  * only use 4 different interrupts.
2324  *
2325  */
2326 static int __init specialix_init_module(void)
2327 {
2328         int i;
2329
2330         func_enter();
2331
2332         if (iobase[0] || iobase[1] || iobase[2] || iobase[3]) {
2333                 for (i = 0; i < SX_NBOARD; i++) {
2334                         sx_board[i].base = iobase[i];
2335                         sx_board[i].irq = irq[i];
2336                         sx_board[i].count = 0;
2337                 }
2338         }
2339
2340         func_exit();
2341
2342         return specialix_init();
2343 }
2344
2345 static void __exit specialix_exit_module(void)
2346 {
2347         int i;
2348
2349         func_enter();
2350
2351         sx_release_drivers();
2352         for (i = 0; i < SX_NBOARD; i++)
2353                 if (sx_board[i].flags & SX_BOARD_PRESENT)
2354                         sx_release_io_range(&sx_board[i]);
2355         func_exit();
2356 }
2357
2358 static struct pci_device_id specialx_pci_tbl[] __devinitdata __used = {
2359         { PCI_DEVICE(PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_SPECIALIX_IO8) },
2360         { }
2361 };
2362 MODULE_DEVICE_TABLE(pci, specialx_pci_tbl);
2363
2364 module_init(specialix_init_module);
2365 module_exit(specialix_exit_module);
2366
2367 MODULE_LICENSE("GPL");
2368 MODULE_ALIAS_CHARDEV_MAJOR(SPECIALIX_NORMAL_MAJOR);