2 * drivers/i2c/chips/tsl2563.c
4 * Copyright (C) 2008 Nokia Corporation
6 * Written by Timo O. Karjalainen <timo.o.karjalainen@nokia.com>
7 * Contact: Amit Kucheria <amit.kucheria@verdurent.com>
9 * Converted to IIO driver
10 * Amit Kucheria <amit.kucheria@verdurent.com>
12 * This program is free software; you can redistribute it and/or
13 * modify it under the terms of the GNU General Public License
14 * version 2 as published by the Free Software Foundation.
16 * This program is distributed in the hope that it will be useful, but
17 * WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
19 * General Public License for more details.
21 * You should have received a copy of the GNU General Public License
22 * along with this program; if not, write to the Free Software
23 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
27 #include <linux/module.h>
28 #include <linux/i2c.h>
29 #include <linux/interrupt.h>
30 #include <linux/irq.h>
31 #include <linux/sched.h>
32 #include <linux/mutex.h>
33 #include <linux/delay.h>
34 #include <linux/platform_device.h>
36 #include <linux/hwmon.h>
37 #include <linux/err.h>
38 #include <linux/slab.h>
43 /* Use this many bits for fraction part. */
44 #define ADC_FRAC_BITS (14)
46 /* Given number of 1/10000's in ADC_FRAC_BITS precision. */
47 #define FRAC10K(f) (((f) * (1L << (ADC_FRAC_BITS))) / (10000))
49 /* Bits used for fraction in calibration coefficients.*/
50 #define CALIB_FRAC_BITS (10)
51 /* 0.5 in CALIB_FRAC_BITS precision */
52 #define CALIB_FRAC_HALF (1 << (CALIB_FRAC_BITS - 1))
53 /* Make a fraction from a number n that was multiplied with b. */
54 #define CALIB_FRAC(n, b) (((n) << CALIB_FRAC_BITS) / (b))
55 /* Decimal 10^(digits in sysfs presentation) */
56 #define CALIB_BASE_SYSFS (1000)
58 #define TSL2563_CMD (0x80)
59 #define TSL2563_CLEARINT (0x40)
61 #define TSL2563_REG_CTRL (0x00)
62 #define TSL2563_REG_TIMING (0x01)
63 #define TSL2563_REG_LOWLOW (0x02) /* data0 low threshold, 2 bytes */
64 #define TSL2563_REG_LOWHIGH (0x03)
65 #define TSL2563_REG_HIGHLOW (0x04) /* data0 high threshold, 2 bytes */
66 #define TSL2563_REG_HIGHHIGH (0x05)
67 #define TSL2563_REG_INT (0x06)
68 #define TSL2563_REG_ID (0x0a)
69 #define TSL2563_REG_DATA0LOW (0x0c) /* broadband sensor value, 2 bytes */
70 #define TSL2563_REG_DATA0HIGH (0x0d)
71 #define TSL2563_REG_DATA1LOW (0x0e) /* infrared sensor value, 2 bytes */
72 #define TSL2563_REG_DATA1HIGH (0x0f)
74 #define TSL2563_CMD_POWER_ON (0x03)
75 #define TSL2563_CMD_POWER_OFF (0x00)
76 #define TSL2563_CTRL_POWER_MASK (0x03)
78 #define TSL2563_TIMING_13MS (0x00)
79 #define TSL2563_TIMING_100MS (0x01)
80 #define TSL2563_TIMING_400MS (0x02)
81 #define TSL2563_TIMING_MASK (0x03)
82 #define TSL2563_TIMING_GAIN16 (0x10)
83 #define TSL2563_TIMING_GAIN1 (0x00)
85 #define TSL2563_INT_DISBLED (0x00)
86 #define TSL2563_INT_LEVEL (0x10)
87 #define TSL2563_INT_PERSIST(n) ((n) & 0x0F)
89 struct tsl2563_gainlevel_coeff {
95 static struct tsl2563_gainlevel_coeff tsl2563_gainlevel_table[] = {
97 .gaintime = TSL2563_TIMING_400MS | TSL2563_TIMING_GAIN16,
101 .gaintime = TSL2563_TIMING_400MS | TSL2563_TIMING_GAIN1,
105 .gaintime = TSL2563_TIMING_100MS | TSL2563_TIMING_GAIN1,
109 .gaintime = TSL2563_TIMING_13MS | TSL2563_TIMING_GAIN1,
115 struct tsl2563_chip {
117 struct i2c_client *client;
118 struct iio_dev *indio_dev;
119 struct delayed_work poweroff_work;
121 struct work_struct work_thresh;
123 /* Remember state for suspend and resume functions */
126 struct tsl2563_gainlevel_coeff *gainlevel;
133 /* Calibration coefficients */
138 /* Cache current values, to be returned while suspended */
143 static int tsl2563_write(struct i2c_client *client, u8 reg, u8 value)
148 buf[0] = TSL2563_CMD | reg;
151 ret = i2c_master_send(client, buf, sizeof(buf));
152 return (ret == sizeof(buf)) ? 0 : ret;
155 static int tsl2563_read(struct i2c_client *client, u8 reg, void *buf, int len)
158 u8 cmd = TSL2563_CMD | reg;
160 ret = i2c_master_send(client, &cmd, sizeof(cmd));
161 if (ret != sizeof(cmd))
164 return i2c_master_recv(client, buf, len);
167 static int tsl2563_set_power(struct tsl2563_chip *chip, int on)
169 struct i2c_client *client = chip->client;
172 cmd = on ? TSL2563_CMD_POWER_ON : TSL2563_CMD_POWER_OFF;
173 return tsl2563_write(client, TSL2563_REG_CTRL, cmd);
177 * Return value is 0 for off, 1 for on, or a negative error
178 * code if reading failed.
180 static int tsl2563_get_power(struct tsl2563_chip *chip)
182 struct i2c_client *client = chip->client;
186 ret = tsl2563_read(client, TSL2563_REG_CTRL, &val, sizeof(val));
187 if (ret != sizeof(val))
190 return (val & TSL2563_CTRL_POWER_MASK) == TSL2563_CMD_POWER_ON;
193 static int tsl2563_configure(struct tsl2563_chip *chip)
197 ret = tsl2563_write(chip->client, TSL2563_REG_TIMING,
198 chip->gainlevel->gaintime);
201 ret = tsl2563_write(chip->client, TSL2563_REG_HIGHLOW,
202 chip->high_thres & 0xFF);
205 ret = tsl2563_write(chip->client, TSL2563_REG_HIGHHIGH,
206 (chip->high_thres >> 8) & 0xFF);
209 ret = tsl2563_write(chip->client, TSL2563_REG_LOWLOW,
210 chip->low_thres & 0xFF);
213 ret = tsl2563_write(chip->client, TSL2563_REG_LOWHIGH,
214 (chip->low_thres >> 8) & 0xFF);
215 /* Interrupt register is automatically written anyway if it is relevant
221 static void tsl2563_poweroff_work(struct work_struct *work)
223 struct tsl2563_chip *chip =
224 container_of(work, struct tsl2563_chip, poweroff_work.work);
225 tsl2563_set_power(chip, 0);
228 static int tsl2563_detect(struct tsl2563_chip *chip)
232 ret = tsl2563_set_power(chip, 1);
236 ret = tsl2563_get_power(chip);
240 return ret ? 0 : -ENODEV;
243 static int tsl2563_read_id(struct tsl2563_chip *chip, u8 *id)
245 struct i2c_client *client = chip->client;
248 ret = tsl2563_read(client, TSL2563_REG_ID, id, sizeof(*id));
249 if (ret != sizeof(*id))
256 * "Normalized" ADC value is one obtained with 400ms of integration time and
257 * 16x gain. This function returns the number of bits of shift needed to
258 * convert between normalized values and HW values obtained using given
259 * timing and gain settings.
261 static int adc_shiftbits(u8 timing)
265 switch (timing & TSL2563_TIMING_MASK) {
266 case TSL2563_TIMING_13MS:
269 case TSL2563_TIMING_100MS:
272 case TSL2563_TIMING_400MS:
277 if (!(timing & TSL2563_TIMING_GAIN16))
283 /* Convert a HW ADC value to normalized scale. */
284 static u32 normalize_adc(u16 adc, u8 timing)
286 return adc << adc_shiftbits(timing);
289 static void tsl2563_wait_adc(struct tsl2563_chip *chip)
293 switch (chip->gainlevel->gaintime & TSL2563_TIMING_MASK) {
294 case TSL2563_TIMING_13MS:
297 case TSL2563_TIMING_100MS:
304 * TODO: Make sure that we wait at least required delay but why we
305 * have to extend it one tick more?
307 schedule_timeout_interruptible(msecs_to_jiffies(delay) + 2);
310 static int tsl2563_adjust_gainlevel(struct tsl2563_chip *chip, u16 adc)
312 struct i2c_client *client = chip->client;
314 if (adc > chip->gainlevel->max || adc < chip->gainlevel->min) {
316 (adc > chip->gainlevel->max) ?
317 chip->gainlevel++ : chip->gainlevel--;
319 tsl2563_write(client, TSL2563_REG_TIMING,
320 chip->gainlevel->gaintime);
322 tsl2563_wait_adc(chip);
323 tsl2563_wait_adc(chip);
330 static int tsl2563_get_adc(struct tsl2563_chip *chip)
332 struct i2c_client *client = chip->client;
338 if (chip->state.event != PM_EVENT_ON)
341 if (!chip->int_enabled) {
342 cancel_delayed_work(&chip->poweroff_work);
344 if (!tsl2563_get_power(chip)) {
345 ret = tsl2563_set_power(chip, 1);
348 ret = tsl2563_configure(chip);
351 tsl2563_wait_adc(chip);
356 ret = tsl2563_read(client,
357 TSL2563_REG_DATA0LOW,
359 if (ret != sizeof(buf0))
362 ret = tsl2563_read(client, TSL2563_REG_DATA1LOW,
364 if (ret != sizeof(buf1))
367 adc0 = (buf0[1] << 8) + buf0[0];
368 adc1 = (buf1[1] << 8) + buf1[0];
370 retry = tsl2563_adjust_gainlevel(chip, adc0);
373 chip->data0 = normalize_adc(adc0, chip->gainlevel->gaintime);
374 chip->data1 = normalize_adc(adc1, chip->gainlevel->gaintime);
376 if (!chip->int_enabled)
377 schedule_delayed_work(&chip->poweroff_work, 5 * HZ);
384 static inline int calib_to_sysfs(u32 calib)
386 return (int) (((calib * CALIB_BASE_SYSFS) +
387 CALIB_FRAC_HALF) >> CALIB_FRAC_BITS);
390 static inline u32 calib_from_sysfs(int value)
392 return (((u32) value) << CALIB_FRAC_BITS) / CALIB_BASE_SYSFS;
396 * Conversions between lux and ADC values.
398 * The basic formula is lux = c0 * adc0 - c1 * adc1, where c0 and c1 are
399 * appropriate constants. Different constants are needed for different
400 * kinds of light, determined by the ratio adc1/adc0 (basically the ratio
401 * of the intensities in infrared and visible wavelengths). lux_table below
402 * lists the upper threshold of the adc1/adc0 ratio and the corresponding
406 struct tsl2563_lux_coeff {
407 unsigned long ch_ratio;
408 unsigned long ch0_coeff;
409 unsigned long ch1_coeff;
412 static const struct tsl2563_lux_coeff lux_table[] = {
414 .ch_ratio = FRAC10K(1300),
415 .ch0_coeff = FRAC10K(315),
416 .ch1_coeff = FRAC10K(262),
418 .ch_ratio = FRAC10K(2600),
419 .ch0_coeff = FRAC10K(337),
420 .ch1_coeff = FRAC10K(430),
422 .ch_ratio = FRAC10K(3900),
423 .ch0_coeff = FRAC10K(363),
424 .ch1_coeff = FRAC10K(529),
426 .ch_ratio = FRAC10K(5200),
427 .ch0_coeff = FRAC10K(392),
428 .ch1_coeff = FRAC10K(605),
430 .ch_ratio = FRAC10K(6500),
431 .ch0_coeff = FRAC10K(229),
432 .ch1_coeff = FRAC10K(291),
434 .ch_ratio = FRAC10K(8000),
435 .ch0_coeff = FRAC10K(157),
436 .ch1_coeff = FRAC10K(180),
438 .ch_ratio = FRAC10K(13000),
439 .ch0_coeff = FRAC10K(34),
440 .ch1_coeff = FRAC10K(26),
442 .ch_ratio = ULONG_MAX,
449 * Convert normalized, scaled ADC values to lux.
451 static unsigned int adc_to_lux(u32 adc0, u32 adc1)
453 const struct tsl2563_lux_coeff *lp = lux_table;
454 unsigned long ratio, lux, ch0 = adc0, ch1 = adc1;
456 ratio = ch0 ? ((ch1 << ADC_FRAC_BITS) / ch0) : ULONG_MAX;
458 while (lp->ch_ratio < ratio)
461 lux = ch0 * lp->ch0_coeff - ch1 * lp->ch1_coeff;
463 return (unsigned int) (lux >> ADC_FRAC_BITS);
466 /*--------------------------------------------------------------*/
467 /* Sysfs interface */
468 /*--------------------------------------------------------------*/
470 static ssize_t tsl2563_adc_show(struct device *dev,
471 struct device_attribute *attr, char *buf)
473 struct iio_dev *indio_dev = dev_get_drvdata(dev);
474 struct tsl2563_chip *chip = indio_dev->dev_data;
475 struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
478 mutex_lock(&chip->lock);
480 ret = tsl2563_get_adc(chip);
484 switch (this_attr->address) {
486 ret = snprintf(buf, PAGE_SIZE, "%d\n", chip->data0);
489 ret = snprintf(buf, PAGE_SIZE, "%d\n", chip->data1);
493 mutex_unlock(&chip->lock);
497 /* Apply calibration coefficient to ADC count. */
498 static u32 calib_adc(u32 adc, u32 calib)
500 unsigned long scaled = adc;
503 scaled >>= CALIB_FRAC_BITS;
508 static ssize_t tsl2563_lux_show(struct device *dev,
509 struct device_attribute *attr, char *buf)
511 struct iio_dev *indio_dev = dev_get_drvdata(dev);
512 struct tsl2563_chip *chip = indio_dev->dev_data;
516 mutex_lock(&chip->lock);
518 ret = tsl2563_get_adc(chip);
522 calib0 = calib_adc(chip->data0, chip->calib0) * chip->cover_comp_gain;
523 calib1 = calib_adc(chip->data1, chip->calib1) * chip->cover_comp_gain;
525 ret = snprintf(buf, PAGE_SIZE, "%d\n", adc_to_lux(calib0, calib1));
528 mutex_unlock(&chip->lock);
532 static ssize_t format_calib(char *buf, int len, u32 calib)
534 return snprintf(buf, PAGE_SIZE, "%d\n", calib_to_sysfs(calib));
537 static ssize_t tsl2563_calib_show(struct device *dev,
538 struct device_attribute *attr, char *buf)
540 struct iio_dev *indio_dev = dev_get_drvdata(dev);
541 struct tsl2563_chip *chip = indio_dev->dev_data;
542 struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
545 mutex_lock(&chip->lock);
546 switch (this_attr->address) {
548 ret = format_calib(buf, PAGE_SIZE, chip->calib0);
551 ret = format_calib(buf, PAGE_SIZE, chip->calib1);
556 mutex_unlock(&chip->lock);
560 static ssize_t tsl2563_calib_store(struct device *dev,
561 struct device_attribute *attr,
562 const char *buf, size_t len)
564 struct iio_dev *indio_dev = dev_get_drvdata(dev);
565 struct tsl2563_chip *chip = indio_dev->dev_data;
566 struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
570 if (1 != sscanf(buf, "%d", &value))
573 calib = calib_from_sysfs(value);
575 switch (this_attr->address) {
577 chip->calib0 = calib;
580 chip->calib1 = calib;
587 static IIO_DEVICE_ATTR(intensity0_both_raw, S_IRUGO,
588 tsl2563_adc_show, NULL, 0);
589 static IIO_DEVICE_ATTR(intensity1_ir_raw, S_IRUGO,
590 tsl2563_adc_show, NULL, 1);
591 static DEVICE_ATTR(illuminance0_input, S_IRUGO, tsl2563_lux_show, NULL);
592 static IIO_DEVICE_ATTR(intensity0_both_calibgain, S_IRUGO | S_IWUSR,
593 tsl2563_calib_show, tsl2563_calib_store, 0);
594 static IIO_DEVICE_ATTR(intensity1_ir_calibgain, S_IRUGO | S_IWUSR,
595 tsl2563_calib_show, tsl2563_calib_store, 1);
597 static ssize_t tsl2563_show_name(struct device *dev,
598 struct device_attribute *attr,
601 struct iio_dev *indio_dev = dev_get_drvdata(dev);
602 struct tsl2563_chip *chip = indio_dev->dev_data;
603 return sprintf(buf, "%s\n", chip->client->name);
606 static DEVICE_ATTR(name, S_IRUGO, tsl2563_show_name, NULL);
608 static struct attribute *tsl2563_attributes[] = {
609 &iio_dev_attr_intensity0_both_raw.dev_attr.attr,
610 &iio_dev_attr_intensity1_ir_raw.dev_attr.attr,
611 &dev_attr_illuminance0_input.attr,
612 &iio_dev_attr_intensity0_both_calibgain.dev_attr.attr,
613 &iio_dev_attr_intensity1_ir_calibgain.dev_attr.attr,
618 static const struct attribute_group tsl2563_group = {
619 .attrs = tsl2563_attributes,
622 static ssize_t tsl2563_read_thresh(struct device *dev,
623 struct device_attribute *attr,
626 struct iio_dev *indio_dev = dev_get_drvdata(dev);
627 struct tsl2563_chip *chip = indio_dev->dev_data;
628 struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
630 switch (this_attr->address) {
631 case TSL2563_REG_HIGHLOW:
632 val = chip->high_thres;
634 case TSL2563_REG_LOWLOW:
635 val = chip->low_thres;
638 return snprintf(buf, PAGE_SIZE, "%d\n", val);
641 static ssize_t tsl2563_write_thresh(struct device *dev,
642 struct device_attribute *attr,
646 struct iio_dev *indio_dev = dev_get_drvdata(dev);
647 struct tsl2563_chip *chip = indio_dev->dev_data;
648 struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
652 ret = strict_strtoul(buf, 10, &val);
655 mutex_lock(&chip->lock);
656 ret = tsl2563_write(chip->client, this_attr->address, val & 0xFF);
659 ret = tsl2563_write(chip->client, this_attr->address + 1,
661 switch (this_attr->address) {
662 case TSL2563_REG_HIGHLOW:
663 chip->high_thres = val;
665 case TSL2563_REG_LOWLOW:
666 chip->low_thres = val;
671 mutex_unlock(&chip->lock);
673 return ret < 0 ? ret : len;
676 static IIO_DEVICE_ATTR(intensity0_both_raw_thresh_rising_value,
679 tsl2563_write_thresh,
680 TSL2563_REG_HIGHLOW);
682 static IIO_DEVICE_ATTR(intensity0_both_raw_thresh_falling_value,
685 tsl2563_write_thresh,
688 static int tsl2563_int_th(struct iio_dev *dev_info,
693 struct tsl2563_chip *chip = dev_info->dev_data;
695 chip->event_timestamp = timestamp;
696 schedule_work(&chip->work_thresh);
701 static void tsl2563_int_bh(struct work_struct *work_s)
703 struct tsl2563_chip *chip
704 = container_of(work_s,
705 struct tsl2563_chip, work_thresh);
706 u8 cmd = TSL2563_CMD | TSL2563_CLEARINT;
708 iio_push_event(chip->indio_dev, 0,
709 IIO_UNMOD_EVENT_CODE(IIO_EV_CLASS_LIGHT,
713 chip->event_timestamp);
716 enable_irq(chip->client->irq);
717 /* clear the interrupt and push the event */
718 i2c_master_send(chip->client, &cmd, sizeof(cmd));
722 static ssize_t tsl2563_write_interrupt_config(struct device *dev,
723 struct device_attribute *attr,
727 struct iio_dev *indio_dev = dev_get_drvdata(dev);
728 struct tsl2563_chip *chip = indio_dev->dev_data;
729 struct iio_event_attr *this_attr = to_iio_event_attr(attr);
732 ret = sscanf(buf, "%d", &input);
735 mutex_lock(&chip->lock);
736 if (input && !(chip->intr & 0x30)) {
737 iio_add_event_to_list(this_attr->listel,
738 &indio_dev->interrupts[0]->ev_list);
741 /* ensure the chip is actually on */
742 cancel_delayed_work(&chip->poweroff_work);
743 if (!tsl2563_get_power(chip)) {
744 ret = tsl2563_set_power(chip, 1);
747 ret = tsl2563_configure(chip);
751 ret = tsl2563_write(chip->client, TSL2563_REG_INT, chip->intr);
752 chip->int_enabled = true;
755 if (!input && (chip->intr & 0x30)) {
757 ret = tsl2563_write(chip->client, TSL2563_REG_INT, chip->intr);
758 iio_remove_event_from_list(this_attr->listel,
759 &indio_dev->interrupts[0]->ev_list);
760 chip->int_enabled = false;
761 /* now the interrupt is not enabled, we can go to sleep */
762 schedule_delayed_work(&chip->poweroff_work, 5 * HZ);
765 mutex_unlock(&chip->lock);
767 return (ret < 0) ? ret : len;
770 static ssize_t tsl2563_read_interrupt_config(struct device *dev,
771 struct device_attribute *attr,
774 struct iio_dev *indio_dev = dev_get_drvdata(dev);
775 struct tsl2563_chip *chip = indio_dev->dev_data;
780 mutex_lock(&chip->lock);
781 ret = tsl2563_read(chip->client,
785 mutex_unlock(&chip->lock);
788 len = snprintf(buf, PAGE_SIZE, "%d\n", !!(rxbuf & 0x30));
791 return (ret < 0) ? ret : len;
794 IIO_EVENT_ATTR(intensity0_both_thresh_en,
795 tsl2563_read_interrupt_config,
796 tsl2563_write_interrupt_config,
800 static struct attribute *tsl2563_event_attributes[] = {
801 &iio_event_attr_intensity0_both_thresh_en.dev_attr.attr,
802 &iio_dev_attr_intensity0_both_raw_thresh_rising_value.dev_attr.attr,
803 &iio_dev_attr_intensity0_both_raw_thresh_falling_value.dev_attr.attr,
807 static struct attribute_group tsl2563_event_attribute_group = {
808 .attrs = tsl2563_event_attributes,
811 /*--------------------------------------------------------------*/
812 /* Probe, Attach, Remove */
813 /*--------------------------------------------------------------*/
814 static struct i2c_driver tsl2563_i2c_driver;
816 static int __devinit tsl2563_probe(struct i2c_client *client,
817 const struct i2c_device_id *device_id)
819 struct tsl2563_chip *chip;
820 struct tsl2563_platform_data *pdata = client->dev.platform_data;
825 chip = kzalloc(sizeof(*chip), GFP_KERNEL);
829 INIT_WORK(&chip->work_thresh, tsl2563_int_bh);
830 i2c_set_clientdata(client, chip);
831 chip->client = client;
833 err = tsl2563_detect(chip);
835 dev_err(&client->dev, "device not found, error %d\n", -err);
839 err = tsl2563_read_id(chip, &id);
843 mutex_init(&chip->lock);
845 /* Default values used until userspace says otherwise */
846 chip->low_thres = 0x0;
847 chip->high_thres = 0xffff;
848 chip->gainlevel = tsl2563_gainlevel_table;
849 chip->intr = TSL2563_INT_PERSIST(4);
850 chip->calib0 = calib_from_sysfs(CALIB_BASE_SYSFS);
851 chip->calib1 = calib_from_sysfs(CALIB_BASE_SYSFS);
854 chip->cover_comp_gain = pdata->cover_comp_gain;
856 chip->cover_comp_gain = 1;
858 dev_info(&client->dev, "model %d, rev. %d\n", id >> 4, id & 0x0f);
860 chip->indio_dev = iio_allocate_device();
861 if (!chip->indio_dev)
863 chip->indio_dev->attrs = &tsl2563_group;
864 chip->indio_dev->dev.parent = &client->dev;
865 chip->indio_dev->dev_data = (void *)(chip);
866 chip->indio_dev->driver_module = THIS_MODULE;
867 chip->indio_dev->modes = INDIO_DIRECT_MODE;
869 chip->indio_dev->num_interrupt_lines = 1;
870 chip->indio_dev->event_attrs
871 = &tsl2563_event_attribute_group;
873 ret = iio_device_register(chip->indio_dev);
878 ret = iio_register_interrupt_line(client->irq,
886 err = tsl2563_configure(chip);
890 INIT_DELAYED_WORK(&chip->poweroff_work, tsl2563_poweroff_work);
891 /* The interrupt cannot yet be enabled so this is fine without lock */
892 schedule_delayed_work(&chip->poweroff_work, 5 * HZ);
897 iio_unregister_interrupt_line(chip->indio_dev, 0);
899 iio_device_unregister(chip->indio_dev);
905 static int tsl2563_remove(struct i2c_client *client)
907 struct tsl2563_chip *chip = i2c_get_clientdata(client);
908 if (!chip->int_enabled)
909 cancel_delayed_work(&chip->poweroff_work);
910 /* Ensure that interrupts are disabled - then flush any bottom halves */
912 tsl2563_write(chip->client, TSL2563_REG_INT, chip->intr);
913 flush_scheduled_work();
914 tsl2563_set_power(chip, 0);
916 iio_unregister_interrupt_line(chip->indio_dev, 0);
917 iio_device_unregister(chip->indio_dev);
923 static int tsl2563_suspend(struct i2c_client *client, pm_message_t state)
925 struct tsl2563_chip *chip = i2c_get_clientdata(client);
928 mutex_lock(&chip->lock);
930 ret = tsl2563_set_power(chip, 0);
937 mutex_unlock(&chip->lock);
941 static int tsl2563_resume(struct i2c_client *client)
943 struct tsl2563_chip *chip = i2c_get_clientdata(client);
946 mutex_lock(&chip->lock);
948 ret = tsl2563_set_power(chip, 1);
952 ret = tsl2563_configure(chip);
956 chip->state.event = PM_EVENT_ON;
959 mutex_unlock(&chip->lock);
963 static const struct i2c_device_id tsl2563_id[] = {
970 MODULE_DEVICE_TABLE(i2c, tsl2563_id);
972 static struct i2c_driver tsl2563_i2c_driver = {
976 .suspend = tsl2563_suspend,
977 .resume = tsl2563_resume,
978 .probe = tsl2563_probe,
979 .remove = __devexit_p(tsl2563_remove),
980 .id_table = tsl2563_id,
983 static int __init tsl2563_init(void)
985 return i2c_add_driver(&tsl2563_i2c_driver);
988 static void __exit tsl2563_exit(void)
990 i2c_del_driver(&tsl2563_i2c_driver);
993 MODULE_AUTHOR("Nokia Corporation");
994 MODULE_DESCRIPTION("tsl2563 light sensor driver");
995 MODULE_LICENSE("GPL");
997 module_init(tsl2563_init);
998 module_exit(tsl2563_exit);