3 Sensoray s626 Comedi driver
5 COMEDI - Linux Control and Measurement Device Interface
6 Copyright (C) 2000 David A. Schleef <ds@schleef.org>
8 Based on Sensoray Model 626 Linux driver Version 0.2
9 Copyright (C) 2002-2004 Sensoray Co., Inc.
11 This program is free software; you can redistribute it and/or modify
12 it under the terms of the GNU General Public License as published by
13 the Free Software Foundation; either version 2 of the License, or
14 (at your option) any later version.
16 This program is distributed in the hope that it will be useful,
17 but WITHOUT ANY WARRANTY; without even the implied warranty of
18 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 GNU General Public License for more details.
21 You should have received a copy of the GNU General Public License
22 along with this program; if not, write to the Free Software
23 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
29 Description: Sensoray 626 driver
30 Devices: [Sensoray] 626 (s626)
31 Authors: Gianluca Palli <gpalli@deis.unibo.it>,
32 Updated: Fri, 15 Feb 2008 10:28:42 +0000
35 Configuration options:
36 [0] - PCI bus of device (optional)
37 [1] - PCI slot of device (optional)
38 If bus/slot is not specified, the first supported
39 PCI device found will be used.
41 INSN_CONFIG instructions:
49 s626 has 3 dio subdevices (2,3 and 4) each with 16 i/o channels
50 supported configuration options:
56 Every channel must be configured before reading.
60 insn.insn=INSN_CONFIG; //configuration instruction
61 insn.n=1; //number of operation (must be 1)
62 insn.data=&initialvalue; //initial value loaded into encoder
63 //during configuration
64 insn.subdev=5; //encoder subdevice
65 insn.chanspec=CR_PACK(encoder_channel,0,AREF_OTHER); //encoder_channel
68 comedi_do_insn(cf,&insn); //executing configuration
71 #include <linux/interrupt.h>
72 #include <linux/kernel.h>
73 #include <linux/types.h>
75 #include "../comedidev.h"
77 #include "comedi_pci.h"
79 #include "comedi_fc.h"
82 MODULE_AUTHOR("Gianluca Palli <gpalli@deis.unibo.it>");
83 MODULE_DESCRIPTION("Sensoray 626 Comedi driver module");
84 MODULE_LICENSE("GPL");
97 static const struct s626_board s626_boards[] = {
100 .ai_chans = S626_ADC_CHANNELS,
102 .ao_chans = S626_DAC_CHANNELS,
104 .dio_chans = S626_DIO_CHANNELS,
105 .dio_banks = S626_DIO_BANKS,
106 .enc_chans = S626_ENCODER_CHANNELS,
110 #define thisboard ((const struct s626_board *)dev->board_ptr)
111 #define PCI_VENDOR_ID_S626 0x1131
112 #define PCI_DEVICE_ID_S626 0x7146
115 * For devices with vendor:device id == 0x1131:0x7146 you must specify
116 * also subvendor:subdevice ids, because otherwise it will conflict with
117 * Philips SAA7146 media/dvb based cards.
119 static DEFINE_PCI_DEVICE_TABLE(s626_pci_table) = {
120 {PCI_VENDOR_ID_S626, PCI_DEVICE_ID_S626, 0x6000, 0x0272, 0, 0, 0},
124 MODULE_DEVICE_TABLE(pci, s626_pci_table);
126 static int s626_attach(struct comedi_device *dev, struct comedi_devconfig *it);
127 static int s626_detach(struct comedi_device *dev);
129 static struct comedi_driver driver_s626 = {
130 .driver_name = "s626",
131 .module = THIS_MODULE,
132 .attach = s626_attach,
133 .detach = s626_detach,
136 struct s626_private {
137 struct pci_dev *pdev;
141 uint8_t ai_cmd_running; /* ai_cmd is running */
142 uint8_t ai_continous; /* continous aquisition */
143 int ai_sample_count; /* number of samples to aquire */
144 unsigned int ai_sample_timer;
145 /* time between samples in units of the timer */
146 int ai_convert_count; /* conversion counter */
147 unsigned int ai_convert_timer;
148 /* time between conversion in units of the timer */
149 uint16_t CounterIntEnabs;
150 /* Counter interrupt enable mask for MISC2 register. */
151 uint8_t AdcItems; /* Number of items in ADC poll list. */
152 struct bufferDMA RPSBuf; /* DMA buffer used to hold ADC (RPS1) program. */
153 struct bufferDMA ANABuf;
154 /* DMA buffer used to receive ADC data and hold DAC data. */
156 /* Pointer to logical adrs of DMA buffer used to hold DAC data. */
157 uint16_t Dacpol; /* Image of DAC polarity register. */
158 uint8_t TrimSetpoint[12]; /* Images of TrimDAC setpoints */
159 uint16_t ChargeEnabled; /* Image of MISC2 Battery */
160 /* Charge Enabled (0 or WRMISC2_CHARGE_ENABLE). */
161 uint16_t WDInterval; /* Image of MISC2 watchdog interval control bits. */
163 /* I2C device address for onboard EEPROM (board rev dependent). */
165 unsigned int ao_readback[S626_DAC_CHANNELS];
180 static struct dio_private dio_private_A = {
182 .WRDOut = LP_WRDOUTA,
183 .RDEdgSel = LP_RDEDGSELA,
184 .WREdgSel = LP_WREDGSELA,
185 .RDCapSel = LP_RDCAPSELA,
186 .WRCapSel = LP_WRCAPSELA,
187 .RDCapFlg = LP_RDCAPFLGA,
188 .RDIntSel = LP_RDINTSELA,
189 .WRIntSel = LP_WRINTSELA,
192 static struct dio_private dio_private_B = {
194 .WRDOut = LP_WRDOUTB,
195 .RDEdgSel = LP_RDEDGSELB,
196 .WREdgSel = LP_WREDGSELB,
197 .RDCapSel = LP_RDCAPSELB,
198 .WRCapSel = LP_WRCAPSELB,
199 .RDCapFlg = LP_RDCAPFLGB,
200 .RDIntSel = LP_RDINTSELB,
201 .WRIntSel = LP_WRINTSELB,
204 static struct dio_private dio_private_C = {
206 .WRDOut = LP_WRDOUTC,
207 .RDEdgSel = LP_RDEDGSELC,
208 .WREdgSel = LP_WREDGSELC,
209 .RDCapSel = LP_RDCAPSELC,
210 .WRCapSel = LP_WRCAPSELC,
211 .RDCapFlg = LP_RDCAPFLGC,
212 .RDIntSel = LP_RDINTSELC,
213 .WRIntSel = LP_WRINTSELC,
216 /* to group dio devices (48 bits mask and data are not allowed ???)
217 static struct dio_private *dio_private_word[]={
224 #define devpriv ((struct s626_private *)dev->private)
225 #define diopriv ((struct dio_private *)s->private)
227 COMEDI_PCI_INITCLEANUP_NOMODULE(driver_s626, s626_pci_table);
230 static int s626_ai_insn_config(struct comedi_device *dev, struct comedi_subdevice *s,
231 struct comedi_insn *insn, unsigned int *data);
232 /* static int s626_ai_rinsn(struct comedi_device *dev,struct comedi_subdevice *s,struct comedi_insn *insn,unsigned int *data); */
233 static int s626_ai_insn_read(struct comedi_device *dev, struct comedi_subdevice *s,
234 struct comedi_insn *insn, unsigned int *data);
235 static int s626_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s);
236 static int s626_ai_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
237 struct comedi_cmd *cmd);
238 static int s626_ai_cancel(struct comedi_device *dev, struct comedi_subdevice *s);
239 static int s626_ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
240 struct comedi_insn *insn, unsigned int *data);
241 static int s626_ao_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
242 struct comedi_insn *insn, unsigned int *data);
243 static int s626_dio_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s,
244 struct comedi_insn *insn, unsigned int *data);
245 static int s626_dio_insn_config(struct comedi_device *dev, struct comedi_subdevice *s,
246 struct comedi_insn *insn, unsigned int *data);
247 static int s626_dio_set_irq(struct comedi_device *dev, unsigned int chan);
248 static int s626_dio_reset_irq(struct comedi_device *dev, unsigned int gruop,
250 static int s626_dio_clear_irq(struct comedi_device *dev);
251 static int s626_enc_insn_config(struct comedi_device *dev, struct comedi_subdevice *s,
252 struct comedi_insn *insn, unsigned int *data);
253 static int s626_enc_insn_read(struct comedi_device *dev, struct comedi_subdevice *s,
254 struct comedi_insn *insn, unsigned int *data);
255 static int s626_enc_insn_write(struct comedi_device *dev, struct comedi_subdevice *s,
256 struct comedi_insn *insn, unsigned int *data);
257 static int s626_ns_to_timer(int *nanosec, int round_mode);
258 static int s626_ai_load_polllist(uint8_t *ppl, struct comedi_cmd *cmd);
259 static int s626_ai_inttrig(struct comedi_device *dev, struct comedi_subdevice *s,
260 unsigned int trignum);
261 static irqreturn_t s626_irq_handler(int irq, void *d);
262 static unsigned int s626_ai_reg_to_uint(int data);
263 /* static unsigned int s626_uint_to_reg(struct comedi_subdevice *s, int data); */
265 /* end ioctl routines */
267 /* internal routines */
268 static void s626_dio_init(struct comedi_device *dev);
269 static void ResetADC(struct comedi_device *dev, uint8_t *ppl);
270 static void LoadTrimDACs(struct comedi_device *dev);
271 static void WriteTrimDAC(struct comedi_device *dev, uint8_t LogicalChan,
273 static uint8_t I2Cread(struct comedi_device *dev, uint8_t addr);
274 static uint32_t I2Chandshake(struct comedi_device *dev, uint32_t val);
275 static void SetDAC(struct comedi_device *dev, uint16_t chan, short dacdata);
276 static void SendDAC(struct comedi_device *dev, uint32_t val);
277 static void WriteMISC2(struct comedi_device *dev, uint16_t NewImage);
278 static void DEBItransfer(struct comedi_device *dev);
279 static uint16_t DEBIread(struct comedi_device *dev, uint16_t addr);
280 static void DEBIwrite(struct comedi_device *dev, uint16_t addr, uint16_t wdata);
281 static void DEBIreplace(struct comedi_device *dev, uint16_t addr, uint16_t mask,
283 static void CloseDMAB(struct comedi_device *dev, struct bufferDMA *pdma, size_t bsize);
285 /* COUNTER OBJECT ------------------------------------------------ */
287 /* Pointers to functions that differ for A and B counters: */
288 uint16_t(*GetEnable) (struct comedi_device *dev, struct enc_private *); /* Return clock enable. */
289 uint16_t(*GetIntSrc) (struct comedi_device *dev, struct enc_private *); /* Return interrupt source. */
290 uint16_t(*GetLoadTrig) (struct comedi_device *dev, struct enc_private *); /* Return preload trigger source. */
291 uint16_t(*GetMode) (struct comedi_device *dev, struct enc_private *); /* Return standardized operating mode. */
292 void (*PulseIndex) (struct comedi_device *dev, struct enc_private *); /* Generate soft index strobe. */
293 void (*SetEnable) (struct comedi_device *dev, struct enc_private *, uint16_t enab); /* Program clock enable. */
294 void (*SetIntSrc) (struct comedi_device *dev, struct enc_private *, uint16_t IntSource); /* Program interrupt source. */
295 void (*SetLoadTrig) (struct comedi_device *dev, struct enc_private *, uint16_t Trig); /* Program preload trigger source. */
296 void (*SetMode) (struct comedi_device *dev, struct enc_private *, uint16_t Setup, uint16_t DisableIntSrc); /* Program standardized operating mode. */
297 void (*ResetCapFlags) (struct comedi_device *dev, struct enc_private *); /* Reset event capture flags. */
299 uint16_t MyCRA; /* Address of CRA register. */
300 uint16_t MyCRB; /* Address of CRB register. */
301 uint16_t MyLatchLsw; /* Address of Latch least-significant-word */
303 uint16_t MyEventBits[4]; /* Bit translations for IntSrc -->RDMISC2. */
306 #define encpriv ((struct enc_private *)(dev->subdevices+5)->private)
308 /* counters routines */
309 static void s626_timer_load(struct comedi_device *dev, struct enc_private *k, int tick);
310 static uint32_t ReadLatch(struct comedi_device *dev, struct enc_private *k);
311 static void ResetCapFlags_A(struct comedi_device *dev, struct enc_private *k);
312 static void ResetCapFlags_B(struct comedi_device *dev, struct enc_private *k);
313 static uint16_t GetMode_A(struct comedi_device *dev, struct enc_private *k);
314 static uint16_t GetMode_B(struct comedi_device *dev, struct enc_private *k);
315 static void SetMode_A(struct comedi_device *dev, struct enc_private *k, uint16_t Setup,
316 uint16_t DisableIntSrc);
317 static void SetMode_B(struct comedi_device *dev, struct enc_private *k, uint16_t Setup,
318 uint16_t DisableIntSrc);
319 static void SetEnable_A(struct comedi_device *dev, struct enc_private *k, uint16_t enab);
320 static void SetEnable_B(struct comedi_device *dev, struct enc_private *k, uint16_t enab);
321 static uint16_t GetEnable_A(struct comedi_device *dev, struct enc_private *k);
322 static uint16_t GetEnable_B(struct comedi_device *dev, struct enc_private *k);
323 static void SetLatchSource(struct comedi_device *dev, struct enc_private *k,
325 /* static uint16_t GetLatchSource(struct comedi_device *dev, struct enc_private *k ); */
326 static void SetLoadTrig_A(struct comedi_device *dev, struct enc_private *k, uint16_t Trig);
327 static void SetLoadTrig_B(struct comedi_device *dev, struct enc_private *k, uint16_t Trig);
328 static uint16_t GetLoadTrig_A(struct comedi_device *dev, struct enc_private *k);
329 static uint16_t GetLoadTrig_B(struct comedi_device *dev, struct enc_private *k);
330 static void SetIntSrc_B(struct comedi_device *dev, struct enc_private *k,
332 static void SetIntSrc_A(struct comedi_device *dev, struct enc_private *k,
334 static uint16_t GetIntSrc_A(struct comedi_device *dev, struct enc_private *k);
335 static uint16_t GetIntSrc_B(struct comedi_device *dev, struct enc_private *k);
336 /* static void SetClkMult(struct comedi_device *dev, struct enc_private *k, uint16_t value ) ; */
337 /* static uint16_t GetClkMult(struct comedi_device *dev, struct enc_private *k ) ; */
338 /* static void SetIndexPol(struct comedi_device *dev, struct enc_private *k, uint16_t value ); */
339 /* static uint16_t GetClkPol(struct comedi_device *dev, struct enc_private *k ) ; */
340 /* static void SetIndexSrc( struct comedi_device *dev,struct enc_private *k, uint16_t value ); */
341 /* static uint16_t GetClkSrc( struct comedi_device *dev,struct enc_private *k ); */
342 /* static void SetIndexSrc( struct comedi_device *dev,struct enc_private *k, uint16_t value ); */
343 /* static uint16_t GetIndexSrc( struct comedi_device *dev,struct enc_private *k ); */
344 static void PulseIndex_A(struct comedi_device *dev, struct enc_private *k);
345 static void PulseIndex_B(struct comedi_device *dev, struct enc_private *k);
346 static void Preload(struct comedi_device *dev, struct enc_private *k, uint32_t value);
347 static void CountersInit(struct comedi_device *dev);
348 /* end internal routines */
350 /* Counter objects constructor. */
352 /* Counter overflow/index event flag masks for RDMISC2. */
353 #define INDXMASK(C) (1 << (((C) > 2) ? ((C) * 2 - 1) : ((C) * 2 + 4)))
354 #define OVERMASK(C) (1 << (((C) > 2) ? ((C) * 2 + 5) : ((C) * 2 + 10)))
355 #define EVBITS(C) { 0, OVERMASK(C), INDXMASK(C), OVERMASK(C) | INDXMASK(C) }
357 /* Translation table to map IntSrc into equivalent RDMISC2 event flag bits. */
358 /* static const uint16_t EventBits[][4] = { EVBITS(0), EVBITS(1), EVBITS(2), EVBITS(3), EVBITS(4), EVBITS(5) }; */
360 /* struct enc_private; */
361 static struct enc_private enc_private_data[] = {
363 .GetEnable = GetEnable_A,
364 .GetIntSrc = GetIntSrc_A,
365 .GetLoadTrig = GetLoadTrig_A,
366 .GetMode = GetMode_A,
367 .PulseIndex = PulseIndex_A,
368 .SetEnable = SetEnable_A,
369 .SetIntSrc = SetIntSrc_A,
370 .SetLoadTrig = SetLoadTrig_A,
371 .SetMode = SetMode_A,
372 .ResetCapFlags = ResetCapFlags_A,
375 .MyLatchLsw = LP_CNTR0ALSW,
376 .MyEventBits = EVBITS(0),
379 .GetEnable = GetEnable_A,
380 .GetIntSrc = GetIntSrc_A,
381 .GetLoadTrig = GetLoadTrig_A,
382 .GetMode = GetMode_A,
383 .PulseIndex = PulseIndex_A,
384 .SetEnable = SetEnable_A,
385 .SetIntSrc = SetIntSrc_A,
386 .SetLoadTrig = SetLoadTrig_A,
387 .SetMode = SetMode_A,
388 .ResetCapFlags = ResetCapFlags_A,
391 .MyLatchLsw = LP_CNTR1ALSW,
392 .MyEventBits = EVBITS(1),
395 .GetEnable = GetEnable_A,
396 .GetIntSrc = GetIntSrc_A,
397 .GetLoadTrig = GetLoadTrig_A,
398 .GetMode = GetMode_A,
399 .PulseIndex = PulseIndex_A,
400 .SetEnable = SetEnable_A,
401 .SetIntSrc = SetIntSrc_A,
402 .SetLoadTrig = SetLoadTrig_A,
403 .SetMode = SetMode_A,
404 .ResetCapFlags = ResetCapFlags_A,
407 .MyLatchLsw = LP_CNTR2ALSW,
408 .MyEventBits = EVBITS(2),
411 .GetEnable = GetEnable_B,
412 .GetIntSrc = GetIntSrc_B,
413 .GetLoadTrig = GetLoadTrig_B,
414 .GetMode = GetMode_B,
415 .PulseIndex = PulseIndex_B,
416 .SetEnable = SetEnable_B,
417 .SetIntSrc = SetIntSrc_B,
418 .SetLoadTrig = SetLoadTrig_B,
419 .SetMode = SetMode_B,
420 .ResetCapFlags = ResetCapFlags_B,
423 .MyLatchLsw = LP_CNTR0BLSW,
424 .MyEventBits = EVBITS(3),
427 .GetEnable = GetEnable_B,
428 .GetIntSrc = GetIntSrc_B,
429 .GetLoadTrig = GetLoadTrig_B,
430 .GetMode = GetMode_B,
431 .PulseIndex = PulseIndex_B,
432 .SetEnable = SetEnable_B,
433 .SetIntSrc = SetIntSrc_B,
434 .SetLoadTrig = SetLoadTrig_B,
435 .SetMode = SetMode_B,
436 .ResetCapFlags = ResetCapFlags_B,
439 .MyLatchLsw = LP_CNTR1BLSW,
440 .MyEventBits = EVBITS(4),
443 .GetEnable = GetEnable_B,
444 .GetIntSrc = GetIntSrc_B,
445 .GetLoadTrig = GetLoadTrig_B,
446 .GetMode = GetMode_B,
447 .PulseIndex = PulseIndex_B,
448 .SetEnable = SetEnable_B,
449 .SetIntSrc = SetIntSrc_B,
450 .SetLoadTrig = SetLoadTrig_B,
451 .SetMode = SetMode_B,
452 .ResetCapFlags = ResetCapFlags_B,
455 .MyLatchLsw = LP_CNTR2BLSW,
456 .MyEventBits = EVBITS(5),
460 /* enab/disable a function or test status bit(s) that are accessed */
461 /* through Main Control Registers 1 or 2. */
462 #define MC_ENABLE(REGADRS, CTRLWORD) writel(((uint32_t)(CTRLWORD) << 16) | (uint32_t)(CTRLWORD), devpriv->base_addr+(REGADRS))
464 #define MC_DISABLE(REGADRS, CTRLWORD) writel((uint32_t)(CTRLWORD) << 16 , devpriv->base_addr+(REGADRS))
466 #define MC_TEST(REGADRS, CTRLWORD) ((readl(devpriv->base_addr+(REGADRS)) & CTRLWORD) != 0)
468 /* #define WR7146(REGARDS,CTRLWORD)
469 writel(CTRLWORD,(uint32_t)(devpriv->base_addr+(REGARDS))) */
470 #define WR7146(REGARDS, CTRLWORD) writel(CTRLWORD, devpriv->base_addr+(REGARDS))
472 /* #define RR7146(REGARDS)
473 readl((uint32_t)(devpriv->base_addr+(REGARDS))) */
474 #define RR7146(REGARDS) readl(devpriv->base_addr+(REGARDS))
476 #define BUGFIX_STREG(REGADRS) (REGADRS - 4)
478 /* Write a time slot control record to TSL2. */
479 #define VECTPORT(VECTNUM) (P_TSL2 + ((VECTNUM) << 2))
480 #define SETVECT(VECTNUM, VECTVAL) WR7146(VECTPORT(VECTNUM), (VECTVAL))
482 /* Code macros used for constructing I2C command bytes. */
483 #define I2C_B2(ATTR, VAL) (((ATTR) << 6) | ((VAL) << 24))
484 #define I2C_B1(ATTR, VAL) (((ATTR) << 4) | ((VAL) << 16))
485 #define I2C_B0(ATTR, VAL) (((ATTR) << 2) | ((VAL) << 8))
487 static const struct comedi_lrange s626_range_table = { 2, {
493 static int s626_attach(struct comedi_device *dev, struct comedi_devconfig *it)
495 /* uint8_t PollList; */
496 /* uint16_t AdcData; */
497 /* uint16_t StartVal; */
498 /* uint16_t index; */
499 /* unsigned int data[16]; */
503 resource_size_t resourceStart;
505 struct comedi_subdevice *s;
506 const struct pci_device_id *ids;
507 struct pci_dev *pdev = NULL;
509 if (alloc_private(dev, sizeof(struct s626_private)) < 0)
512 for (i = 0; i < (ARRAY_SIZE(s626_pci_table) - 1) && !pdev; i++) {
513 ids = &s626_pci_table[i];
515 pdev = pci_get_subsys(ids->vendor, ids->device, ids->subvendor,
516 ids->subdevice, pdev);
518 if ((it->options[0] || it->options[1]) && pdev) {
519 /* matches requested bus/slot */
520 if (pdev->bus->number == it->options[0] &&
521 PCI_SLOT(pdev->devfn) == it->options[1])
527 devpriv->pdev = pdev;
530 printk("s626_attach: Board not present!!!\n");
534 result = comedi_pci_enable(pdev, "s626");
536 printk("s626_attach: comedi_pci_enable fails\n");
539 devpriv->got_regions = 1;
541 resourceStart = pci_resource_start(devpriv->pdev, 0);
543 devpriv->base_addr = ioremap(resourceStart, SIZEOF_ADDRESS_SPACE);
544 if (devpriv->base_addr == NULL) {
545 printk("s626_attach: IOREMAP failed\n");
549 if (devpriv->base_addr) {
550 /* disable master interrupt */
551 writel(0, devpriv->base_addr + P_IER);
554 writel(MC1_SOFT_RESET, devpriv->base_addr + P_MC1);
556 /* DMA FIXME DMA// */
557 DEBUG("s626_attach: DMA ALLOCATION\n");
559 /* adc buffer allocation */
560 devpriv->allocatedBuf = 0;
562 devpriv->ANABuf.LogicalBase =
563 pci_alloc_consistent(devpriv->pdev, DMABUF_SIZE, &appdma);
565 if (devpriv->ANABuf.LogicalBase == NULL) {
566 printk("s626_attach: DMA Memory mapping error\n");
570 devpriv->ANABuf.PhysicalBase = appdma;
572 DEBUG("s626_attach: AllocDMAB ADC Logical=%p, bsize=%d, Physical=0x%x\n", devpriv->ANABuf.LogicalBase, DMABUF_SIZE, (uint32_t) devpriv->ANABuf.PhysicalBase);
574 devpriv->allocatedBuf++;
576 devpriv->RPSBuf.LogicalBase =
577 pci_alloc_consistent(devpriv->pdev, DMABUF_SIZE, &appdma);
579 if (devpriv->RPSBuf.LogicalBase == NULL) {
580 printk("s626_attach: DMA Memory mapping error\n");
584 devpriv->RPSBuf.PhysicalBase = appdma;
586 DEBUG("s626_attach: AllocDMAB RPS Logical=%p, bsize=%d, Physical=0x%x\n", devpriv->RPSBuf.LogicalBase, DMABUF_SIZE, (uint32_t) devpriv->RPSBuf.PhysicalBase);
588 devpriv->allocatedBuf++;
592 dev->board_ptr = s626_boards;
593 dev->board_name = thisboard->name;
595 if (alloc_subdevices(dev, 6) < 0)
598 dev->iobase = (unsigned long)devpriv->base_addr;
599 dev->irq = devpriv->pdev->irq;
601 /* set up interrupt handler */
603 printk(" unknown irq (bad)\n");
605 ret = request_irq(dev->irq, s626_irq_handler, IRQF_SHARED,
609 printk(" irq not available\n");
614 DEBUG("s626_attach: -- it opts %d,%d -- \n",
615 it->options[0], it->options[1]);
617 s = dev->subdevices + 0;
618 /* analog input subdevice */
619 dev->read_subdev = s;
620 /* we support single-ended (ground) and differential */
621 s->type = COMEDI_SUBD_AI;
622 s->subdev_flags = SDF_READABLE | SDF_DIFF | SDF_CMD_READ;
623 s->n_chan = thisboard->ai_chans;
624 s->maxdata = (0xffff >> 2);
625 s->range_table = &s626_range_table;
626 s->len_chanlist = thisboard->ai_chans; /* This is the maximum chanlist
627 length that the board can
629 s->insn_config = s626_ai_insn_config;
630 s->insn_read = s626_ai_insn_read;
631 s->do_cmd = s626_ai_cmd;
632 s->do_cmdtest = s626_ai_cmdtest;
633 s->cancel = s626_ai_cancel;
635 s = dev->subdevices + 1;
636 /* analog output subdevice */
637 s->type = COMEDI_SUBD_AO;
638 s->subdev_flags = SDF_WRITABLE | SDF_READABLE;
639 s->n_chan = thisboard->ao_chans;
640 s->maxdata = (0x3fff);
641 s->range_table = &range_bipolar10;
642 s->insn_write = s626_ao_winsn;
643 s->insn_read = s626_ao_rinsn;
645 s = dev->subdevices + 2;
646 /* digital I/O subdevice */
647 s->type = COMEDI_SUBD_DIO;
648 s->subdev_flags = SDF_WRITABLE | SDF_READABLE;
649 s->n_chan = S626_DIO_CHANNELS;
652 s->private = &dio_private_A;
653 s->range_table = &range_digital;
654 s->insn_config = s626_dio_insn_config;
655 s->insn_bits = s626_dio_insn_bits;
657 s = dev->subdevices + 3;
658 /* digital I/O subdevice */
659 s->type = COMEDI_SUBD_DIO;
660 s->subdev_flags = SDF_WRITABLE | SDF_READABLE;
664 s->private = &dio_private_B;
665 s->range_table = &range_digital;
666 s->insn_config = s626_dio_insn_config;
667 s->insn_bits = s626_dio_insn_bits;
669 s = dev->subdevices + 4;
670 /* digital I/O subdevice */
671 s->type = COMEDI_SUBD_DIO;
672 s->subdev_flags = SDF_WRITABLE | SDF_READABLE;
676 s->private = &dio_private_C;
677 s->range_table = &range_digital;
678 s->insn_config = s626_dio_insn_config;
679 s->insn_bits = s626_dio_insn_bits;
681 s = dev->subdevices + 5;
682 /* encoder (counter) subdevice */
683 s->type = COMEDI_SUBD_COUNTER;
684 s->subdev_flags = SDF_WRITABLE | SDF_READABLE | SDF_LSAMPL;
685 s->n_chan = thisboard->enc_chans;
686 s->private = enc_private_data;
687 s->insn_config = s626_enc_insn_config;
688 s->insn_read = s626_enc_insn_read;
689 s->insn_write = s626_enc_insn_write;
690 s->maxdata = 0xffffff;
691 s->range_table = &range_unknown;
693 /* stop ai_command */
694 devpriv->ai_cmd_running = 0;
696 if (devpriv->base_addr && (devpriv->allocatedBuf == 2)) {
700 /* enab DEBI and audio pins, enable I2C interface. */
701 MC_ENABLE(P_MC1, MC1_DEBI | MC1_AUDIO | MC1_I2C);
702 /* Configure DEBI operating mode. */
703 WR7146(P_DEBICFG, DEBI_CFG_SLAVE16 /* Local bus is 16 */
705 | (DEBI_TOUT << DEBI_CFG_TOUT_BIT) /* Declare DEBI */
706 /* transfer timeout */
708 | DEBI_SWAP /* Set up byte lane */
710 | DEBI_CFG_INTEL); /* Intel-compatible */
711 /* local bus (DEBI */
712 /* never times out). */
713 DEBUG("s626_attach: %d debi init -- %d\n",
714 DEBI_CFG_SLAVE16 | (DEBI_TOUT << DEBI_CFG_TOUT_BIT) |
715 DEBI_SWAP | DEBI_CFG_INTEL,
716 DEBI_CFG_INTEL | DEBI_CFG_TOQ | DEBI_CFG_INCQ |
719 /* DEBI INIT S626 WR7146( P_DEBICFG, DEBI_CFG_INTEL | DEBI_CFG_TOQ */
720 /* | DEBI_CFG_INCQ| DEBI_CFG_16Q); //end */
722 /* Paging is disabled. */
723 WR7146(P_DEBIPAGE, DEBI_PAGE_DISABLE); /* Disable MMU paging. */
725 /* Init GPIO so that ADC Start* is negated. */
726 WR7146(P_GPIO, GPIO_BASE | GPIO1_HI);
728 /* IsBoardRevA is a boolean that indicates whether the board is RevA.
730 * VERSION 2.01 CHANGE: REV A & B BOARDS NOW SUPPORTED BY DYNAMIC
731 * EEPROM ADDRESS SELECTION. Initialize the I2C interface, which
732 * is used to access the onboard serial EEPROM. The EEPROM's I2C
733 * DeviceAddress is hardwired to a value that is dependent on the
734 * 626 board revision. On all board revisions, the EEPROM stores
735 * TrimDAC calibration constants for analog I/O. On RevB and
736 * higher boards, the DeviceAddress is hardwired to 0 to enable
737 * the EEPROM to also store the PCI SubVendorID and SubDeviceID;
738 * this is the address at which the SAA7146 expects a
739 * configuration EEPROM to reside. On RevA boards, the EEPROM
740 * device address, which is hardwired to 4, prevents the SAA7146
741 * from retrieving PCI sub-IDs, so the SAA7146 uses its built-in
742 * default values, instead.
745 /* devpriv->I2Cards= IsBoardRevA ? 0xA8 : 0xA0; // Set I2C EEPROM */
746 /* DeviceType (0xA0) */
747 /* and DeviceAddress<<1. */
749 devpriv->I2CAdrs = 0xA0; /* I2C device address for onboard */
752 /* Issue an I2C ABORT command to halt any I2C operation in */
753 /* progress and reset BUSY flag. */
754 WR7146(P_I2CSTAT, I2C_CLKSEL | I2C_ABORT);
755 /* Write I2C control: abort any I2C activity. */
756 MC_ENABLE(P_MC2, MC2_UPLD_IIC);
757 /* Invoke command upload */
758 while ((RR7146(P_MC2) & MC2_UPLD_IIC) == 0)
760 /* and wait for upload to complete. */
762 /* Per SAA7146 data sheet, write to STATUS reg twice to
763 * reset all I2C error flags. */
764 for (i = 0; i < 2; i++) {
765 WR7146(P_I2CSTAT, I2C_CLKSEL);
766 /* Write I2C control: reset error flags. */
767 MC_ENABLE(P_MC2, MC2_UPLD_IIC); /* Invoke command upload */
768 while (!MC_TEST(P_MC2, MC2_UPLD_IIC))
770 /* and wait for upload to complete. */
773 /* Init audio interface functional attributes: set DAC/ADC
774 * serial clock rates, invert DAC serial clock so that
775 * DAC data setup times are satisfied, enable DAC serial
779 WR7146(P_ACON2, ACON2_INIT);
781 /* Set up TSL1 slot list, which is used to control the
782 * accumulation of ADC data: RSD1 = shift data in on SD1.
783 * SIB_A1 = store data uint8_t at next available location in
784 * FB BUFFER1 register. */
785 WR7146(P_TSL1, RSD1 | SIB_A1);
786 /* Fetch ADC high data uint8_t. */
787 WR7146(P_TSL1 + 4, RSD1 | SIB_A1 | EOS);
788 /* Fetch ADC low data uint8_t; end of TSL1. */
790 /* enab TSL1 slot list so that it executes all the time. */
791 WR7146(P_ACON1, ACON1_ADCSTART);
793 /* Initialize RPS registers used for ADC. */
795 /* Physical start of RPS program. */
796 WR7146(P_RPSADDR1, (uint32_t) devpriv->RPSBuf.PhysicalBase);
798 WR7146(P_RPSPAGE1, 0);
799 /* RPS program performs no explicit mem writes. */
800 WR7146(P_RPS1_TOUT, 0); /* Disable RPS timeouts. */
802 /* SAA7146 BUG WORKAROUND. Initialize SAA7146 ADC interface
803 * to a known state by invoking ADCs until FB BUFFER 1
804 * register shows that it is correctly receiving ADC data.
805 * This is necessary because the SAA7146 ADC interface does
806 * not start up in a defined state after a PCI reset.
809 /* PollList = EOPL; // Create a simple polling */
810 /* // list for analog input */
812 /* ResetADC( dev, &PollList ); */
814 /* s626_ai_rinsn(dev,dev->subdevices,NULL,data); //( &AdcData ); // */
815 /* //Get initial ADC */
818 /* StartVal = data[0]; */
820 /* // VERSION 2.01 CHANGE: TIMEOUT ADDED TO PREVENT HANGED EXECUTION. */
821 /* // Invoke ADCs until the new ADC value differs from the initial */
822 /* // value or a timeout occurs. The timeout protects against the */
823 /* // possibility that the driver is restarting and the ADC data is a */
824 /* // fixed value resulting from the applied ADC analog input being */
825 /* // unusually quiet or at the rail. */
827 /* for ( index = 0; index < 500; index++ ) */
829 /* s626_ai_rinsn(dev,dev->subdevices,NULL,data); */
830 /* AdcData = data[0]; //ReadADC( &AdcData ); */
831 /* if ( AdcData != StartVal ) */
837 /* init the DAC interface */
839 /* Init Audio2's output DMAC attributes: burst length = 1
840 * DWORD, threshold = 1 DWORD.
842 WR7146(P_PCI_BT_A, 0);
844 /* Init Audio2's output DMA physical addresses. The protection
845 * address is set to 1 DWORD past the base address so that a
846 * single DWORD will be transferred each time a DMA transfer is
850 devpriv->ANABuf.PhysicalBase +
851 (DAC_WDMABUF_OS * sizeof(uint32_t));
853 WR7146(P_BASEA2_OUT, (uint32_t) pPhysBuf); /* Buffer base adrs. */
854 WR7146(P_PROTA2_OUT, (uint32_t) (pPhysBuf + sizeof(uint32_t))); /* Protection address. */
856 /* Cache Audio2's output DMA buffer logical address. This is
857 * where DAC data is buffered for A2 output DMA transfers. */
859 (uint32_t *) devpriv->ANABuf.LogicalBase +
862 /* Audio2's output channels does not use paging. The protection
863 * violation handling bit is set so that the DMAC will
864 * automatically halt and its PCI address pointer will be reset
865 * when the protection address is reached. */
867 WR7146(P_PAGEA2_OUT, 8);
869 /* Initialize time slot list 2 (TSL2), which is used to control
870 * the clock generation for and serialization of data to be sent
871 * to the DAC devices. Slot 0 is a NOP that is used to trap TSL
872 * execution; this permits other slots to be safely modified
873 * without first turning off the TSL sequencer (which is
874 * apparently impossible to do). Also, SD3 (which is driven by a
875 * pull-up resistor) is shifted in and stored to the MSB of
876 * FB_BUFFER2 to be used as evidence that the slot sequence has
877 * not yet finished executing.
880 SETVECT(0, XSD2 | RSD3 | SIB_A2 | EOS);
881 /* Slot 0: Trap TSL execution, shift 0xFF into FB_BUFFER2. */
883 /* Initialize slot 1, which is constant. Slot 1 causes a
884 * DWORD to be transferred from audio channel 2's output FIFO
885 * to the FIFO's output buffer so that it can be serialized
886 * and sent to the DAC during subsequent slots. All remaining
887 * slots are dynamically populated as required by the target
891 /* Slot 1: Fetch DWORD from Audio2's output FIFO. */
893 /* Start DAC's audio interface (TSL2) running. */
894 WR7146(P_ACON1, ACON1_DACSTART);
896 /* end init DAC interface */
898 /* Init Trim DACs to calibrated values. Do it twice because the
899 * SAA7146 audio channel does not always reset properly and
900 * sometimes causes the first few TrimDAC writes to malfunction.
904 LoadTrimDACs(dev); /* Insurance. */
906 /* Manually init all gate array hardware in case this is a soft
907 * reset (we have no way of determining whether this is a warm
908 * or cold start). This is necessary because the gate array will
909 * reset only in response to a PCI hard reset; there is no soft
912 /* Init all DAC outputs to 0V and init all DAC setpoint and
915 for (chan = 0; chan < S626_DAC_CHANNELS; chan++)
916 SetDAC(dev, chan, 0);
918 /* Init image of WRMISC2 Battery Charger Enabled control bit.
919 * This image is used when the state of the charger control bit,
920 * which has no direct hardware readback mechanism, is queried.
922 devpriv->ChargeEnabled = 0;
924 /* Init image of watchdog timer interval in WRMISC2. This image
925 * maintains the value of the control bits of MISC2 are
926 * continuously reset to zero as long as the WD timer is disabled.
928 devpriv->WDInterval = 0;
930 /* Init Counter Interrupt enab mask for RDMISC2. This mask is
931 * applied against MISC2 when testing to determine which timer
932 * events are requesting interrupt service.
934 devpriv->CounterIntEnabs = 0;
939 /* Without modifying the state of the Battery Backup enab, disable
940 * the watchdog timer, set DIO channels 0-5 to operate in the
941 * standard DIO (vs. counter overflow) mode, disable the battery
942 * charger, and reset the watchdog interval selector to zero.
944 WriteMISC2(dev, (uint16_t) (DEBIread(dev,
945 LP_RDMISC2) & MISC2_BATT_ENABLE));
947 /* Initialize the digital I/O subsystem. */
950 /* enable interrupt test */
951 /* writel(IRQ_GPIO3 | IRQ_RPS1,devpriv->base_addr+P_IER); */
954 DEBUG("s626_attach: comedi%d s626 attached %04x\n", dev->minor,
955 (uint32_t) devpriv->base_addr);
960 static unsigned int s626_ai_reg_to_uint(int data)
962 unsigned int tempdata;
964 tempdata = (data >> 18);
965 if (tempdata & 0x2000)
968 tempdata += (1 << 13);
973 /* static unsigned int s626_uint_to_reg(struct comedi_subdevice *s, int data){ */
977 static irqreturn_t s626_irq_handler(int irq, void *d)
979 struct comedi_device *dev = d;
980 struct comedi_subdevice *s;
981 struct comedi_cmd *cmd;
982 struct enc_private *k;
985 uint32_t irqtype, irqstatus;
991 DEBUG("s626_irq_handler: interrupt request recieved!!!\n");
993 if (dev->attached == 0)
995 /* lock to avoid race with comedi_poll */
996 spin_lock_irqsave(&dev->spinlock, flags);
998 /* save interrupt enable register state */
999 irqstatus = readl(devpriv->base_addr + P_IER);
1001 /* read interrupt type */
1002 irqtype = readl(devpriv->base_addr + P_ISR);
1004 /* disable master interrupt */
1005 writel(0, devpriv->base_addr + P_IER);
1007 /* clear interrupt */
1008 writel(irqtype, devpriv->base_addr + P_ISR);
1011 DEBUG("s626_irq_handler: interrupt type %d\n", irqtype);
1014 case IRQ_RPS1: /* end_of_scan occurs */
1016 DEBUG("s626_irq_handler: RPS1 irq detected\n");
1018 /* manage ai subdevice */
1019 s = dev->subdevices;
1020 cmd = &(s->async->cmd);
1022 /* Init ptr to DMA buffer that holds new ADC data. We skip the
1023 * first uint16_t in the buffer because it contains junk data from
1024 * the final ADC of the previous poll list scan.
1026 readaddr = (int32_t *) devpriv->ANABuf.LogicalBase + 1;
1028 /* get the data and hand it over to comedi */
1029 for (i = 0; i < (s->async->cmd.chanlist_len); i++) {
1030 /* Convert ADC data to 16-bit integer values and copy to application */
1032 tempdata = s626_ai_reg_to_uint((int)*readaddr);
1035 /* put data into read buffer */
1036 /* comedi_buf_put(s->async, tempdata); */
1037 if (cfc_write_to_buffer(s, tempdata) == 0)
1038 printk("s626_irq_handler: cfc_write_to_buffer error!\n");
1040 DEBUG("s626_irq_handler: ai channel %d acquired: %d\n",
1044 /* end of scan occurs */
1045 s->async->events |= COMEDI_CB_EOS;
1047 if (!(devpriv->ai_continous))
1048 devpriv->ai_sample_count--;
1049 if (devpriv->ai_sample_count <= 0) {
1050 devpriv->ai_cmd_running = 0;
1052 /* Stop RPS program. */
1053 MC_DISABLE(P_MC1, MC1_ERPS1);
1055 /* send end of acquisition */
1056 s->async->events |= COMEDI_CB_EOA;
1058 /* disable master interrupt */
1062 if (devpriv->ai_cmd_running && cmd->scan_begin_src == TRIG_EXT) {
1063 DEBUG("s626_irq_handler: enable interrupt on dio channel %d\n", cmd->scan_begin_arg);
1065 s626_dio_set_irq(dev, cmd->scan_begin_arg);
1067 DEBUG("s626_irq_handler: External trigger is set!!!\n");
1069 /* tell comedi that data is there */
1070 DEBUG("s626_irq_handler: events %d\n", s->async->events);
1071 comedi_event(dev, s);
1073 case IRQ_GPIO3: /* check dio and conter interrupt */
1075 DEBUG("s626_irq_handler: GPIO3 irq detected\n");
1077 /* manage ai subdevice */
1078 s = dev->subdevices;
1079 cmd = &(s->async->cmd);
1081 /* s626_dio_clear_irq(dev); */
1083 for (group = 0; group < S626_DIO_BANKS; group++) {
1085 /* read interrupt type */
1086 irqbit = DEBIread(dev,
1087 ((struct dio_private *) (dev->subdevices + 2 +
1088 group)->private)->RDCapFlg);
1090 /* check if interrupt is generated from dio channels */
1092 s626_dio_reset_irq(dev, group, irqbit);
1093 DEBUG("s626_irq_handler: check interrupt on dio group %d %d\n", group, i);
1094 if (devpriv->ai_cmd_running) {
1095 /* check if interrupt is an ai acquisition start trigger */
1096 if ((irqbit >> (cmd->start_arg -
1099 && cmd->start_src == TRIG_EXT) {
1100 DEBUG("s626_irq_handler: Edge capture interrupt recieved from channel %d\n", cmd->start_arg);
1102 /* Start executing the RPS program. */
1103 MC_ENABLE(P_MC1, MC1_ERPS1);
1105 DEBUG("s626_irq_handler: aquisition start triggered!!!\n");
1107 if (cmd->scan_begin_src ==
1109 DEBUG("s626_ai_cmd: enable interrupt on dio channel %d\n", cmd->scan_begin_arg);
1111 s626_dio_set_irq(dev,
1115 DEBUG("s626_irq_handler: External scan trigger is set!!!\n");
1118 if ((irqbit >> (cmd->scan_begin_arg -
1121 && cmd->scan_begin_src ==
1123 DEBUG("s626_irq_handler: Edge capture interrupt recieved from channel %d\n", cmd->scan_begin_arg);
1125 /* Trigger ADC scan loop start by setting RPS Signal 0. */
1126 MC_ENABLE(P_MC2, MC2_ADC_RPS);
1128 DEBUG("s626_irq_handler: scan triggered!!! %d\n", devpriv->ai_sample_count);
1129 if (cmd->convert_src ==
1132 DEBUG("s626_ai_cmd: enable interrupt on dio channel %d group %d\n", cmd->convert_arg - (16 * group), group);
1140 s626_dio_set_irq(dev,
1144 DEBUG("s626_irq_handler: External convert trigger is set!!!\n");
1147 if (cmd->convert_src ==
1155 k->SetEnable(dev, k,
1159 if ((irqbit >> (cmd->convert_arg -
1162 && cmd->convert_src ==
1164 DEBUG("s626_irq_handler: Edge capture interrupt recieved from channel %d\n", cmd->convert_arg);
1166 /* Trigger ADC scan loop start by setting RPS Signal 0. */
1167 MC_ENABLE(P_MC2, MC2_ADC_RPS);
1169 DEBUG("s626_irq_handler: adc convert triggered!!!\n");
1171 devpriv->ai_convert_count--;
1173 if (devpriv->ai_convert_count >
1176 DEBUG("s626_ai_cmd: enable interrupt on dio channel %d group %d\n", cmd->convert_arg - (16 * group), group);
1178 s626_dio_set_irq(dev,
1182 DEBUG("s626_irq_handler: External trigger is set!!!\n");
1190 /* read interrupt type */
1191 irqbit = DEBIread(dev, LP_RDMISC2);
1193 /* check interrupt on counters */
1194 DEBUG("s626_irq_handler: check counters interrupt %d\n",
1197 if (irqbit & IRQ_COINT1A) {
1198 DEBUG("s626_irq_handler: interrupt on counter 1A overflow\n");
1201 /* clear interrupt capture flag */
1202 k->ResetCapFlags(dev, k);
1204 if (irqbit & IRQ_COINT2A) {
1205 DEBUG("s626_irq_handler: interrupt on counter 2A overflow\n");
1208 /* clear interrupt capture flag */
1209 k->ResetCapFlags(dev, k);
1211 if (irqbit & IRQ_COINT3A) {
1212 DEBUG("s626_irq_handler: interrupt on counter 3A overflow\n");
1215 /* clear interrupt capture flag */
1216 k->ResetCapFlags(dev, k);
1218 if (irqbit & IRQ_COINT1B) {
1219 DEBUG("s626_irq_handler: interrupt on counter 1B overflow\n");
1222 /* clear interrupt capture flag */
1223 k->ResetCapFlags(dev, k);
1225 if (irqbit & IRQ_COINT2B) {
1226 DEBUG("s626_irq_handler: interrupt on counter 2B overflow\n");
1229 /* clear interrupt capture flag */
1230 k->ResetCapFlags(dev, k);
1232 if (devpriv->ai_convert_count > 0) {
1233 devpriv->ai_convert_count--;
1234 if (devpriv->ai_convert_count == 0)
1235 k->SetEnable(dev, k, CLKENAB_INDEX);
1237 if (cmd->convert_src == TRIG_TIMER) {
1238 DEBUG("s626_irq_handler: conver timer trigger!!! %d\n", devpriv->ai_convert_count);
1240 /* Trigger ADC scan loop start by setting RPS Signal 0. */
1241 MC_ENABLE(P_MC2, MC2_ADC_RPS);
1245 if (irqbit & IRQ_COINT3B) {
1246 DEBUG("s626_irq_handler: interrupt on counter 3B overflow\n");
1249 /* clear interrupt capture flag */
1250 k->ResetCapFlags(dev, k);
1252 if (cmd->scan_begin_src == TRIG_TIMER) {
1253 DEBUG("s626_irq_handler: scan timer trigger!!!\n");
1255 /* Trigger ADC scan loop start by setting RPS Signal 0. */
1256 MC_ENABLE(P_MC2, MC2_ADC_RPS);
1259 if (cmd->convert_src == TRIG_TIMER) {
1260 DEBUG("s626_irq_handler: convert timer trigger is set\n");
1262 devpriv->ai_convert_count = cmd->chanlist_len;
1263 k->SetEnable(dev, k, CLKENAB_ALWAYS);
1268 /* enable interrupt */
1269 writel(irqstatus, devpriv->base_addr + P_IER);
1271 DEBUG("s626_irq_handler: exit interrupt service routine.\n");
1273 spin_unlock_irqrestore(&dev->spinlock, flags);
1277 static int s626_detach(struct comedi_device *dev)
1280 /* stop ai_command */
1281 devpriv->ai_cmd_running = 0;
1283 if (devpriv->base_addr) {
1284 /* interrupt mask */
1285 WR7146(P_IER, 0); /* Disable master interrupt. */
1286 WR7146(P_ISR, IRQ_GPIO3 | IRQ_RPS1); /* Clear board's IRQ status flag. */
1288 /* Disable the watchdog timer and battery charger. */
1291 /* Close all interfaces on 7146 device. */
1292 WR7146(P_MC1, MC1_SHUTDOWN);
1293 WR7146(P_ACON1, ACON1_BASE);
1295 CloseDMAB(dev, &devpriv->RPSBuf, DMABUF_SIZE);
1296 CloseDMAB(dev, &devpriv->ANABuf, DMABUF_SIZE);
1300 free_irq(dev->irq, dev);
1302 if (devpriv->base_addr)
1303 iounmap(devpriv->base_addr);
1305 if (devpriv->pdev) {
1306 if (devpriv->got_regions)
1307 comedi_pci_disable(devpriv->pdev);
1308 pci_dev_put(devpriv->pdev);
1312 DEBUG("s626_detach: S626 detached!\n");
1318 * this functions build the RPS program for hardware driven acquistion
1320 void ResetADC(struct comedi_device *dev, uint8_t *ppl)
1322 register uint32_t *pRPS;
1327 struct comedi_cmd *cmd = &(dev->subdevices->async->cmd);
1329 /* Stop RPS program in case it is currently running. */
1330 MC_DISABLE(P_MC1, MC1_ERPS1);
1332 /* Set starting logical address to write RPS commands. */
1333 pRPS = (uint32_t *) devpriv->RPSBuf.LogicalBase;
1335 /* Initialize RPS instruction pointer. */
1336 WR7146(P_RPSADDR1, (uint32_t) devpriv->RPSBuf.PhysicalBase);
1338 /* Construct RPS program in RPSBuf DMA buffer */
1340 if (cmd != NULL && cmd->scan_begin_src != TRIG_FOLLOW) {
1341 DEBUG("ResetADC: scan_begin pause inserted\n");
1342 /* Wait for Start trigger. */
1343 *pRPS++ = RPS_PAUSE | RPS_SIGADC;
1344 *pRPS++ = RPS_CLRSIGNAL | RPS_SIGADC;
1347 /* SAA7146 BUG WORKAROUND Do a dummy DEBI Write. This is necessary
1348 * because the first RPS DEBI Write following a non-RPS DEBI write
1349 * seems to always fail. If we don't do this dummy write, the ADC
1350 * gain might not be set to the value required for the first slot in
1351 * the poll list; the ADC gain would instead remain unchanged from
1352 * the previously programmed value.
1354 *pRPS++ = RPS_LDREG | (P_DEBICMD >> 2);
1355 /* Write DEBI Write command and address to shadow RAM. */
1357 *pRPS++ = DEBI_CMD_WRWORD | LP_GSEL;
1358 *pRPS++ = RPS_LDREG | (P_DEBIAD >> 2);
1359 /* Write DEBI immediate data to shadow RAM: */
1361 *pRPS++ = GSEL_BIPOLAR5V;
1362 /* arbitrary immediate data value. */
1364 *pRPS++ = RPS_CLRSIGNAL | RPS_DEBI;
1365 /* Reset "shadow RAM uploaded" flag. */
1366 *pRPS++ = RPS_UPLOAD | RPS_DEBI; /* Invoke shadow RAM upload. */
1367 *pRPS++ = RPS_PAUSE | RPS_DEBI; /* Wait for shadow upload to finish. */
1369 /* Digitize all slots in the poll list. This is implemented as a
1370 * for loop to limit the slot count to 16 in case the application
1371 * forgot to set the EOPL flag in the final slot.
1373 for (devpriv->AdcItems = 0; devpriv->AdcItems < 16; devpriv->AdcItems++) {
1374 /* Convert application's poll list item to private board class
1375 * format. Each app poll list item is an uint8_t with form
1376 * (EOPL,x,x,RANGE,CHAN<3:0>), where RANGE code indicates 0 =
1377 * +-10V, 1 = +-5V, and EOPL = End of Poll List marker.
1380 (*ppl << 8) | (*ppl & 0x10 ? GSEL_BIPOLAR5V :
1383 /* Switch ADC analog gain. */
1384 *pRPS++ = RPS_LDREG | (P_DEBICMD >> 2); /* Write DEBI command */
1385 /* and address to */
1387 *pRPS++ = DEBI_CMD_WRWORD | LP_GSEL;
1388 *pRPS++ = RPS_LDREG | (P_DEBIAD >> 2); /* Write DEBI */
1389 /* immediate data to */
1392 *pRPS++ = RPS_CLRSIGNAL | RPS_DEBI; /* Reset "shadow RAM uploaded" */
1394 *pRPS++ = RPS_UPLOAD | RPS_DEBI; /* Invoke shadow RAM upload. */
1395 *pRPS++ = RPS_PAUSE | RPS_DEBI; /* Wait for shadow upload to */
1398 /* Select ADC analog input channel. */
1399 *pRPS++ = RPS_LDREG | (P_DEBICMD >> 2);
1400 /* Write DEBI command and address to shadow RAM. */
1401 *pRPS++ = DEBI_CMD_WRWORD | LP_ISEL;
1402 *pRPS++ = RPS_LDREG | (P_DEBIAD >> 2);
1403 /* Write DEBI immediate data to shadow RAM. */
1405 *pRPS++ = RPS_CLRSIGNAL | RPS_DEBI;
1406 /* Reset "shadow RAM uploaded" flag. */
1408 *pRPS++ = RPS_UPLOAD | RPS_DEBI;
1409 /* Invoke shadow RAM upload. */
1411 *pRPS++ = RPS_PAUSE | RPS_DEBI;
1412 /* Wait for shadow upload to finish. */
1414 /* Delay at least 10 microseconds for analog input settling.
1415 * Instead of padding with NOPs, we use RPS_JUMP instructions
1416 * here; this allows us to produce a longer delay than is
1417 * possible with NOPs because each RPS_JUMP flushes the RPS'
1418 * instruction prefetch pipeline.
1421 (uint32_t) devpriv->RPSBuf.PhysicalBase +
1422 (uint32_t) ((unsigned long)pRPS -
1423 (unsigned long)devpriv->RPSBuf.LogicalBase);
1424 for (i = 0; i < (10 * RPSCLK_PER_US / 2); i++) {
1425 JmpAdrs += 8; /* Repeat to implement time delay: */
1426 *pRPS++ = RPS_JUMP; /* Jump to next RPS instruction. */
1430 if (cmd != NULL && cmd->convert_src != TRIG_NOW) {
1431 DEBUG("ResetADC: convert pause inserted\n");
1432 /* Wait for Start trigger. */
1433 *pRPS++ = RPS_PAUSE | RPS_SIGADC;
1434 *pRPS++ = RPS_CLRSIGNAL | RPS_SIGADC;
1436 /* Start ADC by pulsing GPIO1. */
1437 *pRPS++ = RPS_LDREG | (P_GPIO >> 2); /* Begin ADC Start pulse. */
1438 *pRPS++ = GPIO_BASE | GPIO1_LO;
1440 /* VERSION 2.03 CHANGE: STRETCH OUT ADC START PULSE. */
1441 *pRPS++ = RPS_LDREG | (P_GPIO >> 2); /* End ADC Start pulse. */
1442 *pRPS++ = GPIO_BASE | GPIO1_HI;
1444 /* Wait for ADC to complete (GPIO2 is asserted high when ADC not
1445 * busy) and for data from previous conversion to shift into FB
1446 * BUFFER 1 register.
1448 *pRPS++ = RPS_PAUSE | RPS_GPIO2; /* Wait for ADC done. */
1450 /* Transfer ADC data from FB BUFFER 1 register to DMA buffer. */
1451 *pRPS++ = RPS_STREG | (BUGFIX_STREG(P_FB_BUFFER1) >> 2);
1453 (uint32_t) devpriv->ANABuf.PhysicalBase +
1454 (devpriv->AdcItems << 2);
1456 /* If this slot's EndOfPollList flag is set, all channels have */
1457 /* now been processed. */
1458 if (*ppl++ & EOPL) {
1459 devpriv->AdcItems++; /* Adjust poll list item count. */
1460 break; /* Exit poll list processing loop. */
1463 DEBUG("ResetADC: ADC items %d \n", devpriv->AdcItems);
1465 /* VERSION 2.01 CHANGE: DELAY CHANGED FROM 250NS to 2US. Allow the
1466 * ADC to stabilize for 2 microseconds before starting the final
1467 * (dummy) conversion. This delay is necessary to allow sufficient
1468 * time between last conversion finished and the start of the dummy
1469 * conversion. Without this delay, the last conversion's data value
1470 * is sometimes set to the previous conversion's data value.
1472 for (n = 0; n < (2 * RPSCLK_PER_US); n++)
1475 /* Start a dummy conversion to cause the data from the last
1476 * conversion of interest to be shifted in.
1478 *pRPS++ = RPS_LDREG | (P_GPIO >> 2); /* Begin ADC Start pulse. */
1479 *pRPS++ = GPIO_BASE | GPIO1_LO;
1481 /* VERSION 2.03 CHANGE: STRETCH OUT ADC START PULSE. */
1482 *pRPS++ = RPS_LDREG | (P_GPIO >> 2); /* End ADC Start pulse. */
1483 *pRPS++ = GPIO_BASE | GPIO1_HI;
1485 /* Wait for the data from the last conversion of interest to arrive
1486 * in FB BUFFER 1 register.
1488 *pRPS++ = RPS_PAUSE | RPS_GPIO2; /* Wait for ADC done. */
1490 /* Transfer final ADC data from FB BUFFER 1 register to DMA buffer. */
1491 *pRPS++ = RPS_STREG | (BUGFIX_STREG(P_FB_BUFFER1) >> 2); /* */
1493 (uint32_t) devpriv->ANABuf.PhysicalBase +
1494 (devpriv->AdcItems << 2);
1496 /* Indicate ADC scan loop is finished. */
1497 /* *pRPS++= RPS_CLRSIGNAL | RPS_SIGADC ; // Signal ReadADC() that scan is done. */
1499 /* invoke interrupt */
1500 if (devpriv->ai_cmd_running == 1) {
1501 DEBUG("ResetADC: insert irq in ADC RPS task\n");
1504 /* Restart RPS program at its beginning. */
1505 *pRPS++ = RPS_JUMP; /* Branch to start of RPS program. */
1506 *pRPS++ = (uint32_t) devpriv->RPSBuf.PhysicalBase;
1508 /* End of RPS program build */
1511 /* TO COMPLETE, IF NECESSARY */
1512 static int s626_ai_insn_config(struct comedi_device *dev, struct comedi_subdevice *s,
1513 struct comedi_insn *insn, unsigned int *data)
1519 /* static int s626_ai_rinsn(struct comedi_device *dev,struct comedi_subdevice *s,struct comedi_insn *insn,unsigned int *data) */
1521 /* register uint8_t i; */
1522 /* register int32_t *readaddr; */
1524 /* DEBUG("as626_ai_rinsn: ai_rinsn enter \n"); */
1526 /* Trigger ADC scan loop start by setting RPS Signal 0. */
1527 /* MC_ENABLE( P_MC2, MC2_ADC_RPS ); */
1529 /* Wait until ADC scan loop is finished (RPS Signal 0 reset). */
1530 /* while ( MC_TEST( P_MC2, MC2_ADC_RPS ) ); */
1532 /* Init ptr to DMA buffer that holds new ADC data. We skip the
1533 * first uint16_t in the buffer because it contains junk data from
1534 * the final ADC of the previous poll list scan.
1536 /* readaddr = (uint32_t *)devpriv->ANABuf.LogicalBase + 1; */
1538 /* Convert ADC data to 16-bit integer values and copy to application buffer. */
1539 /* for ( i = 0; i < devpriv->AdcItems; i++ ) { */
1540 /* *data = s626_ai_reg_to_uint( *readaddr++ ); */
1541 /* DEBUG("s626_ai_rinsn: data %d \n",*data); */
1545 /* DEBUG("s626_ai_rinsn: ai_rinsn escape \n"); */
1549 static int s626_ai_insn_read(struct comedi_device *dev, struct comedi_subdevice *s,
1550 struct comedi_insn *insn, unsigned int *data)
1552 uint16_t chan = CR_CHAN(insn->chanspec);
1553 uint16_t range = CR_RANGE(insn->chanspec);
1554 uint16_t AdcSpec = 0;
1558 /* interrupt call test */
1559 /* writel(IRQ_GPIO3,devpriv->base_addr+P_PSR); */
1560 /* Writing a logical 1 into any of the RPS_PSR bits causes the
1561 * corresponding interrupt to be generated if enabled
1564 DEBUG("s626_ai_insn_read: entering\n");
1566 /* Convert application's ADC specification into form
1567 * appropriate for register programming.
1570 AdcSpec = (chan << 8) | (GSEL_BIPOLAR5V);
1572 AdcSpec = (chan << 8) | (GSEL_BIPOLAR10V);
1574 /* Switch ADC analog gain. */
1575 DEBIwrite(dev, LP_GSEL, AdcSpec); /* Set gain. */
1577 /* Select ADC analog input channel. */
1578 DEBIwrite(dev, LP_ISEL, AdcSpec); /* Select channel. */
1580 for (n = 0; n < insn->n; n++) {
1582 /* Delay 10 microseconds for analog input settling. */
1585 /* Start ADC by pulsing GPIO1 low. */
1586 GpioImage = RR7146(P_GPIO);
1587 /* Assert ADC Start command */
1588 WR7146(P_GPIO, GpioImage & ~GPIO1_HI);
1589 /* and stretch it out. */
1590 WR7146(P_GPIO, GpioImage & ~GPIO1_HI);
1591 WR7146(P_GPIO, GpioImage & ~GPIO1_HI);
1592 /* Negate ADC Start command. */
1593 WR7146(P_GPIO, GpioImage | GPIO1_HI);
1595 /* Wait for ADC to complete (GPIO2 is asserted high when */
1596 /* ADC not busy) and for data from previous conversion to */
1597 /* shift into FB BUFFER 1 register. */
1599 /* Wait for ADC done. */
1600 while (!(RR7146(P_PSR) & PSR_GPIO2))
1603 /* Fetch ADC data. */
1605 data[n - 1] = s626_ai_reg_to_uint(RR7146(P_FB_BUFFER1));
1607 /* Allow the ADC to stabilize for 4 microseconds before
1608 * starting the next (final) conversion. This delay is
1609 * necessary to allow sufficient time between last
1610 * conversion finished and the start of the next
1611 * conversion. Without this delay, the last conversion's
1612 * data value is sometimes set to the previous
1613 * conversion's data value.
1618 /* Start a dummy conversion to cause the data from the
1619 * previous conversion to be shifted in. */
1620 GpioImage = RR7146(P_GPIO);
1622 /* Assert ADC Start command */
1623 WR7146(P_GPIO, GpioImage & ~GPIO1_HI);
1624 /* and stretch it out. */
1625 WR7146(P_GPIO, GpioImage & ~GPIO1_HI);
1626 WR7146(P_GPIO, GpioImage & ~GPIO1_HI);
1627 /* Negate ADC Start command. */
1628 WR7146(P_GPIO, GpioImage | GPIO1_HI);
1630 /* Wait for the data to arrive in FB BUFFER 1 register. */
1632 /* Wait for ADC done. */
1633 while (!(RR7146(P_PSR) & PSR_GPIO2))
1636 /* Fetch ADC data from audio interface's input shift register. */
1638 /* Fetch ADC data. */
1640 data[n - 1] = s626_ai_reg_to_uint(RR7146(P_FB_BUFFER1));
1642 DEBUG("s626_ai_insn_read: samples %d, data %d\n", n, data[n - 1]);
1647 static int s626_ai_load_polllist(uint8_t *ppl, struct comedi_cmd *cmd)
1652 for (n = 0; n < cmd->chanlist_len; n++) {
1653 if (CR_RANGE((cmd->chanlist)[n]) == 0)
1654 ppl[n] = (CR_CHAN((cmd->chanlist)[n])) | (RANGE_5V);
1656 ppl[n] = (CR_CHAN((cmd->chanlist)[n])) | (RANGE_10V);
1663 static int s626_ai_inttrig(struct comedi_device *dev, struct comedi_subdevice *s,
1664 unsigned int trignum)
1669 DEBUG("s626_ai_inttrig: trigger adc start...");
1671 /* Start executing the RPS program. */
1672 MC_ENABLE(P_MC1, MC1_ERPS1);
1674 s->async->inttrig = NULL;
1682 static int s626_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
1686 struct comedi_cmd *cmd = &s->async->cmd;
1687 struct enc_private *k;
1690 DEBUG("s626_ai_cmd: entering command function\n");
1692 if (devpriv->ai_cmd_running) {
1693 printk("s626_ai_cmd: Another ai_cmd is running %d\n",
1697 /* disable interrupt */
1698 writel(0, devpriv->base_addr + P_IER);
1700 /* clear interrupt request */
1701 writel(IRQ_RPS1 | IRQ_GPIO3, devpriv->base_addr + P_ISR);
1703 /* clear any pending interrupt */
1704 s626_dio_clear_irq(dev);
1705 /* s626_enc_clear_irq(dev); */
1707 /* reset ai_cmd_running flag */
1708 devpriv->ai_cmd_running = 0;
1710 /* test if cmd is valid */
1712 DEBUG("s626_ai_cmd: NULL command\n");
1715 DEBUG("s626_ai_cmd: command recieved!!!\n");
1718 if (dev->irq == 0) {
1720 "s626_ai_cmd: cannot run command without an irq");
1724 s626_ai_load_polllist(ppl, cmd);
1725 devpriv->ai_cmd_running = 1;
1726 devpriv->ai_convert_count = 0;
1728 switch (cmd->scan_begin_src) {
1732 /* set a conter to generate adc trigger at scan_begin_arg interval */
1734 tick = s626_ns_to_timer((int *)&cmd->scan_begin_arg,
1735 cmd->flags & TRIG_ROUND_MASK);
1737 /* load timer value and enable interrupt */
1738 s626_timer_load(dev, k, tick);
1739 k->SetEnable(dev, k, CLKENAB_ALWAYS);
1741 DEBUG("s626_ai_cmd: scan trigger timer is set with value %d\n",
1746 /* set the digital line and interrupt for scan trigger */
1747 if (cmd->start_src != TRIG_EXT)
1748 s626_dio_set_irq(dev, cmd->scan_begin_arg);
1750 DEBUG("s626_ai_cmd: External scan trigger is set!!!\n");
1755 switch (cmd->convert_src) {
1759 /* set a conter to generate adc trigger at convert_arg interval */
1761 tick = s626_ns_to_timer((int *)&cmd->convert_arg,
1762 cmd->flags & TRIG_ROUND_MASK);
1764 /* load timer value and enable interrupt */
1765 s626_timer_load(dev, k, tick);
1766 k->SetEnable(dev, k, CLKENAB_INDEX);
1768 DEBUG("s626_ai_cmd: convert trigger timer is set with value %d\n", tick);
1771 /* set the digital line and interrupt for convert trigger */
1772 if (cmd->scan_begin_src != TRIG_EXT
1773 && cmd->start_src == TRIG_EXT)
1774 s626_dio_set_irq(dev, cmd->convert_arg);
1776 DEBUG("s626_ai_cmd: External convert trigger is set!!!\n");
1781 switch (cmd->stop_src) {
1783 /* data arrives as one packet */
1784 devpriv->ai_sample_count = cmd->stop_arg;
1785 devpriv->ai_continous = 0;
1788 /* continous aquisition */
1789 devpriv->ai_continous = 1;
1790 devpriv->ai_sample_count = 0;
1796 switch (cmd->start_src) {
1798 /* Trigger ADC scan loop start by setting RPS Signal 0. */
1799 /* MC_ENABLE( P_MC2, MC2_ADC_RPS ); */
1801 /* Start executing the RPS program. */
1802 MC_ENABLE(P_MC1, MC1_ERPS1);
1804 DEBUG("s626_ai_cmd: ADC triggered\n");
1805 s->async->inttrig = NULL;
1808 /* configure DIO channel for acquisition trigger */
1809 s626_dio_set_irq(dev, cmd->start_arg);
1811 DEBUG("s626_ai_cmd: External start trigger is set!!!\n");
1813 s->async->inttrig = NULL;
1816 s->async->inttrig = s626_ai_inttrig;
1820 /* enable interrupt */
1821 writel(IRQ_GPIO3 | IRQ_RPS1, devpriv->base_addr + P_IER);
1823 DEBUG("s626_ai_cmd: command function terminated\n");
1828 static int s626_ai_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
1829 struct comedi_cmd *cmd)
1834 /* cmdtest tests a particular command to see if it is valid. Using
1835 * the cmdtest ioctl, a user can create a valid cmd and then have it
1836 * executes by the cmd ioctl.
1838 * cmdtest returns 1,2,3,4 or 0, depending on which tests the
1839 * command passes. */
1841 /* step 1: make sure trigger sources are trivially valid */
1843 tmp = cmd->start_src;
1844 cmd->start_src &= TRIG_NOW | TRIG_INT | TRIG_EXT;
1845 if (!cmd->start_src || tmp != cmd->start_src)
1848 tmp = cmd->scan_begin_src;
1849 cmd->scan_begin_src &= TRIG_TIMER | TRIG_EXT | TRIG_FOLLOW;
1850 if (!cmd->scan_begin_src || tmp != cmd->scan_begin_src)
1853 tmp = cmd->convert_src;
1854 cmd->convert_src &= TRIG_TIMER | TRIG_EXT | TRIG_NOW;
1855 if (!cmd->convert_src || tmp != cmd->convert_src)
1858 tmp = cmd->scan_end_src;
1859 cmd->scan_end_src &= TRIG_COUNT;
1860 if (!cmd->scan_end_src || tmp != cmd->scan_end_src)
1863 tmp = cmd->stop_src;
1864 cmd->stop_src &= TRIG_COUNT | TRIG_NONE;
1865 if (!cmd->stop_src || tmp != cmd->stop_src)
1871 /* step 2: make sure trigger sources are unique and mutually
1874 /* note that mutual compatiblity is not an issue here */
1875 if (cmd->scan_begin_src != TRIG_TIMER &&
1876 cmd->scan_begin_src != TRIG_EXT
1877 && cmd->scan_begin_src != TRIG_FOLLOW)
1879 if (cmd->convert_src != TRIG_TIMER &&
1880 cmd->convert_src != TRIG_EXT && cmd->convert_src != TRIG_NOW)
1882 if (cmd->stop_src != TRIG_COUNT && cmd->stop_src != TRIG_NONE)
1888 /* step 3: make sure arguments are trivially compatible */
1890 if (cmd->start_src != TRIG_EXT && cmd->start_arg != 0) {
1895 if (cmd->start_src == TRIG_EXT && cmd->start_arg > 39) {
1896 cmd->start_arg = 39;
1900 if (cmd->scan_begin_src == TRIG_EXT && cmd->scan_begin_arg > 39) {
1901 cmd->scan_begin_arg = 39;
1905 if (cmd->convert_src == TRIG_EXT && cmd->convert_arg > 39) {
1906 cmd->convert_arg = 39;
1909 #define MAX_SPEED 200000 /* in nanoseconds */
1910 #define MIN_SPEED 2000000000 /* in nanoseconds */
1912 if (cmd->scan_begin_src == TRIG_TIMER) {
1913 if (cmd->scan_begin_arg < MAX_SPEED) {
1914 cmd->scan_begin_arg = MAX_SPEED;
1917 if (cmd->scan_begin_arg > MIN_SPEED) {
1918 cmd->scan_begin_arg = MIN_SPEED;
1922 /* external trigger */
1923 /* should be level/edge, hi/lo specification here */
1924 /* should specify multiple external triggers */
1925 /* if(cmd->scan_begin_arg>9){ */
1926 /* cmd->scan_begin_arg=9; */
1930 if (cmd->convert_src == TRIG_TIMER) {
1931 if (cmd->convert_arg < MAX_SPEED) {
1932 cmd->convert_arg = MAX_SPEED;
1935 if (cmd->convert_arg > MIN_SPEED) {
1936 cmd->convert_arg = MIN_SPEED;
1940 /* external trigger */
1942 /* if(cmd->convert_arg>9){ */
1943 /* cmd->convert_arg=9; */
1948 if (cmd->scan_end_arg != cmd->chanlist_len) {
1949 cmd->scan_end_arg = cmd->chanlist_len;
1952 if (cmd->stop_src == TRIG_COUNT) {
1953 if (cmd->stop_arg > 0x00ffffff) {
1954 cmd->stop_arg = 0x00ffffff;
1959 if (cmd->stop_arg != 0) {
1968 /* step 4: fix up any arguments */
1970 if (cmd->scan_begin_src == TRIG_TIMER) {
1971 tmp = cmd->scan_begin_arg;
1972 s626_ns_to_timer((int *)&cmd->scan_begin_arg,
1973 cmd->flags & TRIG_ROUND_MASK);
1974 if (tmp != cmd->scan_begin_arg)
1977 if (cmd->convert_src == TRIG_TIMER) {
1978 tmp = cmd->convert_arg;
1979 s626_ns_to_timer((int *)&cmd->convert_arg,
1980 cmd->flags & TRIG_ROUND_MASK);
1981 if (tmp != cmd->convert_arg)
1983 if (cmd->scan_begin_src == TRIG_TIMER &&
1984 cmd->scan_begin_arg <
1985 cmd->convert_arg * cmd->scan_end_arg) {
1986 cmd->scan_begin_arg =
1987 cmd->convert_arg * cmd->scan_end_arg;
1998 static int s626_ai_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
2000 /* Stop RPS program in case it is currently running. */
2001 MC_DISABLE(P_MC1, MC1_ERPS1);
2003 /* disable master interrupt */
2004 writel(0, devpriv->base_addr + P_IER);
2006 devpriv->ai_cmd_running = 0;
2011 /* This function doesn't require a particular form, this is just what
2012 * happens to be used in some of the drivers. It should convert ns
2013 * nanoseconds to a counter value suitable for programming the device.
2014 * Also, it should adjust ns so that it cooresponds to the actual time
2015 * that the device will use. */
2016 static int s626_ns_to_timer(int *nanosec, int round_mode)
2020 base = 500; /* 2MHz internal clock */
2022 switch (round_mode) {
2023 case TRIG_ROUND_NEAREST:
2025 divider = (*nanosec + base / 2) / base;
2027 case TRIG_ROUND_DOWN:
2028 divider = (*nanosec) / base;
2031 divider = (*nanosec + base - 1) / base;
2035 *nanosec = base * divider;
2039 static int s626_ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
2040 struct comedi_insn *insn, unsigned int *data)
2044 uint16_t chan = CR_CHAN(insn->chanspec);
2047 for (i = 0; i < insn->n; i++) {
2048 dacdata = (int16_t) data[i];
2049 devpriv->ao_readback[CR_CHAN(insn->chanspec)] = data[i];
2050 dacdata -= (0x1fff);
2052 SetDAC(dev, chan, dacdata);
2058 static int s626_ao_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
2059 struct comedi_insn *insn, unsigned int *data)
2063 for (i = 0; i < insn->n; i++)
2064 data[i] = devpriv->ao_readback[CR_CHAN(insn->chanspec)];
2069 /* *************** DIGITAL I/O FUNCTIONS ***************
2070 * All DIO functions address a group of DIO channels by means of
2071 * "group" argument. group may be 0, 1 or 2, which correspond to DIO
2072 * ports A, B and C, respectively.
2075 static void s626_dio_init(struct comedi_device *dev)
2078 struct comedi_subdevice *s;
2080 /* Prepare to treat writes to WRCapSel as capture disables. */
2081 DEBIwrite(dev, LP_MISC1, MISC1_NOEDCAP);
2083 /* For each group of sixteen channels ... */
2084 for (group = 0; group < S626_DIO_BANKS; group++) {
2085 s = dev->subdevices + 2 + group;
2086 DEBIwrite(dev, diopriv->WRIntSel, 0); /* Disable all interrupts. */
2087 DEBIwrite(dev, diopriv->WRCapSel, 0xFFFF); /* Disable all event */
2089 DEBIwrite(dev, diopriv->WREdgSel, 0); /* Init all DIOs to */
2092 DEBIwrite(dev, diopriv->WRDOut, 0); /* Program all outputs */
2093 /* to inactive state. */
2095 DEBUG("s626_dio_init: DIO initialized \n");
2098 /* DIO devices are slightly special. Although it is possible to
2099 * implement the insn_read/insn_write interface, it is much more
2100 * useful to applications if you implement the insn_bits interface.
2101 * This allows packed reading/writing of the DIO channels. The comedi
2102 * core can convert between insn_bits and insn_read/write */
2104 static int s626_dio_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s,
2105 struct comedi_insn *insn, unsigned int *data)
2108 /* Length of data must be 2 (mask and new data, see below) */
2113 printk("comedi%d: s626: s626_dio_insn_bits(): Invalid instruction length\n", dev->minor);
2118 * The insn data consists of a mask in data[0] and the new data in
2119 * data[1]. The mask defines which bits we are concerning about.
2120 * The new data must be anded with the mask. Each channel
2121 * corresponds to a bit.
2124 /* Check if requested ports are configured for output */
2125 if ((s->io_bits & data[0]) != data[0])
2128 s->state &= ~data[0];
2129 s->state |= data[0] & data[1];
2131 /* Write out the new digital output lines */
2133 DEBIwrite(dev, diopriv->WRDOut, s->state);
2135 data[1] = DEBIread(dev, diopriv->RDDIn);
2140 static int s626_dio_insn_config(struct comedi_device *dev, struct comedi_subdevice *s,
2141 struct comedi_insn *insn, unsigned int *data)
2145 case INSN_CONFIG_DIO_QUERY:
2147 (s->io_bits & (1 << CR_CHAN(insn->
2148 chanspec))) ? COMEDI_OUTPUT :
2153 s->io_bits &= ~(1 << CR_CHAN(insn->chanspec));
2156 s->io_bits |= 1 << CR_CHAN(insn->chanspec);
2162 DEBIwrite(dev, diopriv->WRDOut, s->io_bits);
2167 static int s626_dio_set_irq(struct comedi_device *dev, unsigned int chan)
2170 unsigned int bitmask;
2171 unsigned int status;
2173 /* select dio bank */
2175 bitmask = 1 << (chan - (16 * group));
2176 DEBUG("s626_dio_set_irq: enable interrupt on dio channel %d group %d\n",
2177 chan - (16 * group), group);
2179 /* set channel to capture positive edge */
2180 status = DEBIread(dev,
2181 ((struct dio_private *) (dev->subdevices + 2 +
2182 group)->private)->RDEdgSel);
2184 ((struct dio_private *) (dev->subdevices + 2 +
2185 group)->private)->WREdgSel, bitmask | status);
2187 /* enable interrupt on selected channel */
2188 status = DEBIread(dev,
2189 ((struct dio_private *) (dev->subdevices + 2 +
2190 group)->private)->RDIntSel);
2192 ((struct dio_private *) (dev->subdevices + 2 +
2193 group)->private)->WRIntSel, bitmask | status);
2195 /* enable edge capture write command */
2196 DEBIwrite(dev, LP_MISC1, MISC1_EDCAP);
2198 /* enable edge capture on selected channel */
2199 status = DEBIread(dev,
2200 ((struct dio_private *) (dev->subdevices + 2 +
2201 group)->private)->RDCapSel);
2203 ((struct dio_private *) (dev->subdevices + 2 +
2204 group)->private)->WRCapSel, bitmask | status);
2209 static int s626_dio_reset_irq(struct comedi_device *dev, unsigned int group,
2212 DEBUG("s626_dio_reset_irq: disable interrupt on dio channel %d group %d\n", mask, group);
2214 /* disable edge capture write command */
2215 DEBIwrite(dev, LP_MISC1, MISC1_NOEDCAP);
2217 /* enable edge capture on selected channel */
2219 ((struct dio_private *) (dev->subdevices + 2 +
2220 group)->private)->WRCapSel, mask);
2225 static int s626_dio_clear_irq(struct comedi_device *dev)
2229 /* disable edge capture write command */
2230 DEBIwrite(dev, LP_MISC1, MISC1_NOEDCAP);
2232 for (group = 0; group < S626_DIO_BANKS; group++) {
2233 /* clear pending events and interrupt */
2235 ((struct dio_private *) (dev->subdevices + 2 +
2236 group)->private)->WRCapSel, 0xffff);
2242 /* Now this function initializes the value of the counter (data[0])
2243 and set the subdevice. To complete with trigger and interrupt
2245 static int s626_enc_insn_config(struct comedi_device *dev, struct comedi_subdevice *s,
2246 struct comedi_insn *insn, unsigned int *data)
2248 uint16_t Setup = (LOADSRC_INDX << BF_LOADSRC) | /* Preload upon */
2250 (INDXSRC_SOFT << BF_INDXSRC) | /* Disable hardware index. */
2251 (CLKSRC_COUNTER << BF_CLKSRC) | /* Operating mode is Counter. */
2252 (CLKPOL_POS << BF_CLKPOL) | /* Active high clock. */
2253 /* ( CNTDIR_UP << BF_CLKPOL ) | // Count direction is Down. */
2254 (CLKMULT_1X << BF_CLKMULT) | /* Clock multiplier is 1x. */
2255 (CLKENAB_INDEX << BF_CLKENAB);
2256 /* uint16_t DisableIntSrc=TRUE; */
2257 /* uint32_t Preloadvalue; //Counter initial value */
2258 uint16_t valueSrclatch = LATCHSRC_AB_READ;
2259 uint16_t enab = CLKENAB_ALWAYS;
2260 struct enc_private *k = &encpriv[CR_CHAN(insn->chanspec)];
2262 DEBUG("s626_enc_insn_config: encoder config\n");
2264 /* (data==NULL) ? (Preloadvalue=0) : (Preloadvalue=data[0]); */
2266 k->SetMode(dev, k, Setup, TRUE);
2267 Preload(dev, k, *(insn->data));
2268 k->PulseIndex(dev, k);
2269 SetLatchSource(dev, k, valueSrclatch);
2270 k->SetEnable(dev, k, (uint16_t) (enab != 0));
2275 static int s626_enc_insn_read(struct comedi_device *dev, struct comedi_subdevice *s,
2276 struct comedi_insn *insn, unsigned int *data)
2280 struct enc_private *k = &encpriv[CR_CHAN(insn->chanspec)];
2282 DEBUG("s626_enc_insn_read: encoder read channel %d \n",
2283 CR_CHAN(insn->chanspec));
2285 for (n = 0; n < insn->n; n++)
2286 data[n] = ReadLatch(dev, k);
2288 DEBUG("s626_enc_insn_read: encoder sample %d\n", data[n]);
2293 static int s626_enc_insn_write(struct comedi_device *dev, struct comedi_subdevice *s,
2294 struct comedi_insn *insn, unsigned int *data)
2297 struct enc_private *k = &encpriv[CR_CHAN(insn->chanspec)];
2299 DEBUG("s626_enc_insn_write: encoder write channel %d \n",
2300 CR_CHAN(insn->chanspec));
2302 /* Set the preload register */
2303 Preload(dev, k, data[0]);
2305 /* Software index pulse forces the preload register to load */
2306 /* into the counter */
2307 k->SetLoadTrig(dev, k, 0);
2308 k->PulseIndex(dev, k);
2309 k->SetLoadTrig(dev, k, 2);
2311 DEBUG("s626_enc_insn_write: End encoder write\n");
2316 static void s626_timer_load(struct comedi_device *dev, struct enc_private *k, int tick)
2318 uint16_t Setup = (LOADSRC_INDX << BF_LOADSRC) | /* Preload upon */
2320 (INDXSRC_SOFT << BF_INDXSRC) | /* Disable hardware index. */
2321 (CLKSRC_TIMER << BF_CLKSRC) | /* Operating mode is Timer. */
2322 (CLKPOL_POS << BF_CLKPOL) | /* Active high clock. */
2323 (CNTDIR_DOWN << BF_CLKPOL) | /* Count direction is Down. */
2324 (CLKMULT_1X << BF_CLKMULT) | /* Clock multiplier is 1x. */
2325 (CLKENAB_INDEX << BF_CLKENAB);
2326 uint16_t valueSrclatch = LATCHSRC_A_INDXA;
2327 /* uint16_t enab=CLKENAB_ALWAYS; */
2329 k->SetMode(dev, k, Setup, FALSE);
2331 /* Set the preload register */
2332 Preload(dev, k, tick);
2334 /* Software index pulse forces the preload register to load */
2335 /* into the counter */
2336 k->SetLoadTrig(dev, k, 0);
2337 k->PulseIndex(dev, k);
2339 /* set reload on counter overflow */
2340 k->SetLoadTrig(dev, k, 1);
2342 /* set interrupt on overflow */
2343 k->SetIntSrc(dev, k, INTSRC_OVER);
2345 SetLatchSource(dev, k, valueSrclatch);
2346 /* k->SetEnable(dev,k,(uint16_t)(enab != 0)); */
2349 /* *********** DAC FUNCTIONS *********** */
2351 /* Slot 0 base settings. */
2352 #define VECT0 (XSD2 | RSD3 | SIB_A2)
2353 /* Slot 0 always shifts in 0xFF and store it to FB_BUFFER2. */
2355 /* TrimDac LogicalChan-to-PhysicalChan mapping table. */
2356 static uint8_t trimchan[] = { 10, 9, 8, 3, 2, 7, 6, 1, 0, 5, 4 };
2358 /* TrimDac LogicalChan-to-EepromAdrs mapping table. */
2359 static uint8_t trimadrs[] =
2360 { 0x40, 0x41, 0x42, 0x50, 0x51, 0x52, 0x53, 0x60, 0x61, 0x62, 0x63 };
2362 static void LoadTrimDACs(struct comedi_device *dev)
2366 /* Copy TrimDac setpoint values from EEPROM to TrimDacs. */
2367 for (i = 0; i < ARRAY_SIZE(trimchan); i++)
2368 WriteTrimDAC(dev, i, I2Cread(dev, trimadrs[i]));
2371 static void WriteTrimDAC(struct comedi_device *dev, uint8_t LogicalChan,
2376 /* Save the new setpoint in case the application needs to read it back later. */
2377 devpriv->TrimSetpoint[LogicalChan] = (uint8_t) DacData;
2379 /* Map logical channel number to physical channel number. */
2380 chan = (uint32_t) trimchan[LogicalChan];
2382 /* Set up TSL2 records for TrimDac write operation. All slots shift
2383 * 0xFF in from pulled-up SD3 so that the end of the slot sequence
2387 SETVECT(2, XSD2 | XFIFO_1 | WS3);
2388 /* Slot 2: Send high uint8_t to target TrimDac. */
2389 SETVECT(3, XSD2 | XFIFO_0 | WS3);
2390 /* Slot 3: Send low uint8_t to target TrimDac. */
2391 SETVECT(4, XSD2 | XFIFO_3 | WS1);
2392 /* Slot 4: Send NOP high uint8_t to DAC0 to keep clock running. */
2393 SETVECT(5, XSD2 | XFIFO_2 | WS1 | EOS);
2394 /* Slot 5: Send NOP low uint8_t to DAC0. */
2396 /* Construct and transmit target DAC's serial packet:
2397 * ( 0000 AAAA ), ( DDDD DDDD ),( 0x00 ),( 0x00 ) where A<3:0> is the
2398 * DAC channel's address, and D<7:0> is the DAC setpoint. Append a
2399 * WORD value (that writes a channel 0 NOP command to a non-existent
2400 * main DAC channel) that serves to keep the clock running after the
2401 * packet has been sent to the target DAC.
2404 /* Address the DAC channel within the trimdac device. */
2405 SendDAC(dev, ((uint32_t) chan << 8)
2406 | (uint32_t) DacData); /* Include DAC setpoint data. */
2409 /* ************** EEPROM ACCESS FUNCTIONS ************** */
2410 /* Read uint8_t from EEPROM. */
2412 static uint8_t I2Cread(struct comedi_device *dev, uint8_t addr)
2416 /* Send EEPROM target address. */
2417 if (I2Chandshake(dev, I2C_B2(I2C_ATTRSTART, I2CW)
2418 /* Byte2 = I2C command: write to I2C EEPROM device. */
2419 | I2C_B1(I2C_ATTRSTOP, addr)
2420 /* Byte1 = EEPROM internal target address. */
2421 | I2C_B0(I2C_ATTRNOP, 0))) { /* Byte0 = Not sent. */
2422 /* Abort function and declare error if handshake failed. */
2423 DEBUG("I2Cread: error handshake I2Cread a\n");
2426 /* Execute EEPROM read. */
2427 if (I2Chandshake(dev, I2C_B2(I2C_ATTRSTART, I2CR) /* Byte2 = I2C */
2429 /* from I2C EEPROM */
2431 | I2C_B1(I2C_ATTRSTOP, 0) /* Byte1 receives */
2434 | I2C_B0(I2C_ATTRNOP, 0))) { /* Byte0 = Not sent. */
2436 /* Abort function and declare error if handshake failed. */
2437 DEBUG("I2Cread: error handshake I2Cread b\n");
2440 /* Return copy of EEPROM value. */
2441 rtnval = (uint8_t) (RR7146(P_I2CCTRL) >> 16);
2445 static uint32_t I2Chandshake(struct comedi_device *dev, uint32_t val)
2447 /* Write I2C command to I2C Transfer Control shadow register. */
2448 WR7146(P_I2CCTRL, val);
2450 /* Upload I2C shadow registers into working registers and wait for */
2451 /* upload confirmation. */
2453 MC_ENABLE(P_MC2, MC2_UPLD_IIC);
2454 while (!MC_TEST(P_MC2, MC2_UPLD_IIC))
2457 /* Wait until I2C bus transfer is finished or an error occurs. */
2458 while ((RR7146(P_I2CCTRL) & (I2C_BUSY | I2C_ERR)) == I2C_BUSY)
2461 /* Return non-zero if I2C error occured. */
2462 return RR7146(P_I2CCTRL) & I2C_ERR;
2466 /* Private helper function: Write setpoint to an application DAC channel. */
2468 static void SetDAC(struct comedi_device *dev, uint16_t chan, short dacdata)
2470 register uint16_t signmask;
2471 register uint32_t WSImage;
2473 /* Adjust DAC data polarity and set up Polarity Control Register */
2475 signmask = 1 << chan;
2478 devpriv->Dacpol |= signmask;
2480 devpriv->Dacpol &= ~signmask;
2482 /* Limit DAC setpoint value to valid range. */
2483 if ((uint16_t) dacdata > 0x1FFF)
2486 /* Set up TSL2 records (aka "vectors") for DAC update. Vectors V2
2487 * and V3 transmit the setpoint to the target DAC. V4 and V5 send
2488 * data to a non-existent TrimDac channel just to keep the clock
2489 * running after sending data to the target DAC. This is necessary
2490 * to eliminate the clock glitch that would otherwise occur at the
2491 * end of the target DAC's serial data stream. When the sequence
2492 * restarts at V0 (after executing V5), the gate array automatically
2493 * disables gating for the DAC clock and all DAC chip selects.
2496 WSImage = (chan & 2) ? WS1 : WS2;
2497 /* Choose DAC chip select to be asserted. */
2498 SETVECT(2, XSD2 | XFIFO_1 | WSImage);
2499 /* Slot 2: Transmit high data byte to target DAC. */
2500 SETVECT(3, XSD2 | XFIFO_0 | WSImage);
2501 /* Slot 3: Transmit low data byte to target DAC. */
2502 SETVECT(4, XSD2 | XFIFO_3 | WS3);
2503 /* Slot 4: Transmit to non-existent TrimDac channel to keep clock */
2504 SETVECT(5, XSD2 | XFIFO_2 | WS3 | EOS);
2505 /* Slot 5: running after writing target DAC's low data byte. */
2507 /* Construct and transmit target DAC's serial packet:
2508 * ( A10D DDDD ),( DDDD DDDD ),( 0x0F ),( 0x00 ) where A is chan<0>,
2509 * and D<12:0> is the DAC setpoint. Append a WORD value (that writes
2510 * to a non-existent TrimDac channel) that serves to keep the clock
2511 * running after the packet has been sent to the target DAC.
2513 SendDAC(dev, 0x0F000000
2514 /* Continue clock after target DAC data (write to non-existent trimdac). */
2516 /* Address the two main dual-DAC devices (TSL's chip select enables
2517 * target device). */
2518 | ((uint32_t) (chan & 1) << 15)
2519 /* Address the DAC channel within the device. */
2520 | (uint32_t) dacdata); /* Include DAC setpoint data. */
2524 /* Private helper function: Transmit serial data to DAC via Audio
2525 * channel 2. Assumes: (1) TSL2 slot records initialized, and (2)
2526 * Dacpol contains valid target image.
2529 static void SendDAC(struct comedi_device *dev, uint32_t val)
2532 /* START THE SERIAL CLOCK RUNNING ------------- */
2534 /* Assert DAC polarity control and enable gating of DAC serial clock
2535 * and audio bit stream signals. At this point in time we must be
2536 * assured of being in time slot 0. If we are not in slot 0, the
2537 * serial clock and audio stream signals will be disabled; this is
2538 * because the following DEBIwrite statement (which enables signals
2539 * to be passed through the gate array) would execute before the
2540 * trailing edge of WS1/WS3 (which turns off the signals), thus
2541 * causing the signals to be inactive during the DAC write.
2543 DEBIwrite(dev, LP_DACPOL, devpriv->Dacpol);
2545 /* TRANSFER OUTPUT DWORD VALUE INTO A2'S OUTPUT FIFO ---------------- */
2547 /* Copy DAC setpoint value to DAC's output DMA buffer. */
2549 /* WR7146( (uint32_t)devpriv->pDacWBuf, val ); */
2550 *devpriv->pDacWBuf = val;
2552 /* enab the output DMA transfer. This will cause the DMAC to copy
2553 * the DAC's data value to A2's output FIFO. The DMA transfer will
2554 * then immediately terminate because the protection address is
2555 * reached upon transfer of the first DWORD value.
2557 MC_ENABLE(P_MC1, MC1_A2OUT);
2559 /* While the DMA transfer is executing ... */
2561 /* Reset Audio2 output FIFO's underflow flag (along with any other
2562 * FIFO underflow/overflow flags). When set, this flag will
2563 * indicate that we have emerged from slot 0.
2565 WR7146(P_ISR, ISR_AFOU);
2567 /* Wait for the DMA transfer to finish so that there will be data
2568 * available in the FIFO when time slot 1 tries to transfer a DWORD
2569 * from the FIFO to the output buffer register. We test for DMA
2570 * Done by polling the DMAC enable flag; this flag is automatically
2571 * cleared when the transfer has finished.
2573 while ((RR7146(P_MC1) & MC1_A2OUT) != 0)
2576 /* START THE OUTPUT STREAM TO THE TARGET DAC -------------------- */
2578 /* FIFO data is now available, so we enable execution of time slots
2579 * 1 and higher by clearing the EOS flag in slot 0. Note that SD3
2580 * will be shifted in and stored in FB_BUFFER2 for end-of-slot-list
2583 SETVECT(0, XSD2 | RSD3 | SIB_A2);
2585 /* Wait for slot 1 to execute to ensure that the Packet will be
2586 * transmitted. This is detected by polling the Audio2 output FIFO
2587 * underflow flag, which will be set when slot 1 execution has
2588 * finished transferring the DAC's data DWORD from the output FIFO
2589 * to the output buffer register.
2591 while ((RR7146(P_SSR) & SSR_AF2_OUT) == 0)
2594 /* Set up to trap execution at slot 0 when the TSL sequencer cycles
2595 * back to slot 0 after executing the EOS in slot 5. Also,
2596 * simultaneously shift out and in the 0x00 that is ALWAYS the value
2597 * stored in the last byte to be shifted out of the FIFO's DWORD
2600 SETVECT(0, XSD2 | XFIFO_2 | RSD2 | SIB_A2 | EOS);
2602 /* WAIT FOR THE TRANSACTION TO FINISH ----------------------- */
2604 /* Wait for the TSL to finish executing all time slots before
2605 * exiting this function. We must do this so that the next DAC
2606 * write doesn't start, thereby enabling clock/chip select signals:
2608 * 1. Before the TSL sequence cycles back to slot 0, which disables
2609 * the clock/cs signal gating and traps slot // list execution.
2610 * we have not yet finished slot 5 then the clock/cs signals are
2611 * still gated and we have not finished transmitting the stream.
2613 * 2. While slots 2-5 are executing due to a late slot 0 trap. In
2614 * this case, the slot sequence is currently repeating, but with
2615 * clock/cs signals disabled. We must wait for slot 0 to trap
2616 * execution before setting up the next DAC setpoint DMA transfer
2617 * and enabling the clock/cs signals. To detect the end of slot 5,
2618 * we test for the FB_BUFFER2 MSB contents to be equal to 0xFF. If
2619 * the TSL has not yet finished executing slot 5 ...
2621 if ((RR7146(P_FB_BUFFER2) & 0xFF000000) != 0) {
2622 /* The trap was set on time and we are still executing somewhere
2623 * in slots 2-5, so we now wait for slot 0 to execute and trap
2624 * TSL execution. This is detected when FB_BUFFER2 MSB changes
2625 * from 0xFF to 0x00, which slot 0 causes to happen by shifting
2626 * out/in on SD2 the 0x00 that is always referenced by slot 5.
2628 while ((RR7146(P_FB_BUFFER2) & 0xFF000000) != 0)
2631 /* Either (1) we were too late setting the slot 0 trap; the TSL
2632 * sequencer restarted slot 0 before we could set the EOS trap flag,
2633 * or (2) we were not late and execution is now trapped at slot 0.
2634 * In either case, we must now change slot 0 so that it will store
2635 * value 0xFF (instead of 0x00) to FB_BUFFER2 next time it executes.
2636 * In order to do this, we reprogram slot 0 so that it will shift in
2637 * SD3, which is driven only by a pull-up resistor.
2639 SETVECT(0, RSD3 | SIB_A2 | EOS);
2641 /* Wait for slot 0 to execute, at which time the TSL is setup for
2642 * the next DAC write. This is detected when FB_BUFFER2 MSB changes
2643 * from 0x00 to 0xFF.
2645 while ((RR7146(P_FB_BUFFER2) & 0xFF000000) == 0)
2649 static void WriteMISC2(struct comedi_device *dev, uint16_t NewImage)
2651 DEBIwrite(dev, LP_MISC1, MISC1_WENABLE); /* enab writes to */
2652 /* MISC2 register. */
2653 DEBIwrite(dev, LP_WRMISC2, NewImage); /* Write new image to MISC2. */
2654 DEBIwrite(dev, LP_MISC1, MISC1_WDISABLE); /* Disable writes to MISC2. */
2657 /* Initialize the DEBI interface for all transfers. */
2659 static uint16_t DEBIread(struct comedi_device *dev, uint16_t addr)
2663 /* Set up DEBI control register value in shadow RAM. */
2664 WR7146(P_DEBICMD, DEBI_CMD_RDWORD | addr);
2666 /* Execute the DEBI transfer. */
2669 /* Fetch target register value. */
2670 retval = (uint16_t) RR7146(P_DEBIAD);
2672 /* Return register value. */
2676 /* Execute a DEBI transfer. This must be called from within a */
2677 /* critical section. */
2678 static void DEBItransfer(struct comedi_device *dev)
2680 /* Initiate upload of shadow RAM to DEBI control register. */
2681 MC_ENABLE(P_MC2, MC2_UPLD_DEBI);
2683 /* Wait for completion of upload from shadow RAM to DEBI control */
2685 while (!MC_TEST(P_MC2, MC2_UPLD_DEBI))
2688 /* Wait until DEBI transfer is done. */
2689 while (RR7146(P_PSR) & PSR_DEBI_S)
2693 /* Write a value to a gate array register. */
2694 static void DEBIwrite(struct comedi_device *dev, uint16_t addr, uint16_t wdata)
2697 /* Set up DEBI control register value in shadow RAM. */
2698 WR7146(P_DEBICMD, DEBI_CMD_WRWORD | addr);
2699 WR7146(P_DEBIAD, wdata);
2701 /* Execute the DEBI transfer. */
2705 /* Replace the specified bits in a gate array register. Imports: mask
2706 * specifies bits that are to be preserved, wdata is new value to be
2707 * or'd with the masked original.
2709 static void DEBIreplace(struct comedi_device *dev, uint16_t addr, uint16_t mask,
2713 /* Copy target gate array register into P_DEBIAD register. */
2714 WR7146(P_DEBICMD, DEBI_CMD_RDWORD | addr);
2715 /* Set up DEBI control reg value in shadow RAM. */
2716 DEBItransfer(dev); /* Execute the DEBI Read transfer. */
2718 /* Write back the modified image. */
2719 WR7146(P_DEBICMD, DEBI_CMD_WRWORD | addr);
2720 /* Set up DEBI control reg value in shadow RAM. */
2722 WR7146(P_DEBIAD, wdata | ((uint16_t) RR7146(P_DEBIAD) & mask));
2723 /* Modify the register image. */
2724 DEBItransfer(dev); /* Execute the DEBI Write transfer. */
2727 static void CloseDMAB(struct comedi_device *dev, struct bufferDMA *pdma, size_t bsize)
2732 DEBUG("CloseDMAB: Entering S626DRV_CloseDMAB():\n");
2735 /* find the matching allocation from the board struct */
2737 vbptr = pdma->LogicalBase;
2738 vpptr = pdma->PhysicalBase;
2740 pci_free_consistent(devpriv->pdev, bsize, vbptr, vpptr);
2741 pdma->LogicalBase = 0;
2742 pdma->PhysicalBase = 0;
2744 DEBUG("CloseDMAB(): Logical=%p, bsize=%d, Physical=0x%x\n",
2745 vbptr, bsize, (uint32_t) vpptr);
2749 /* ****** COUNTER FUNCTIONS ******* */
2750 /* All counter functions address a specific counter by means of the
2751 * "Counter" argument, which is a logical counter number. The Counter
2752 * argument may have any of the following legal values: 0=0A, 1=1A,
2753 * 2=2A, 3=0B, 4=1B, 5=2B.
2756 /* Forward declarations for functions that are common to both A and B counters: */
2758 /* ****** PRIVATE COUNTER FUNCTIONS ****** */
2760 /* Read a counter's output latch. */
2762 static uint32_t ReadLatch(struct comedi_device *dev, struct enc_private *k)
2764 register uint32_t value;
2765 /* DEBUG FIXME DEBUG("ReadLatch: Read Latch enter\n"); */
2767 /* Latch counts and fetch LSW of latched counts value. */
2768 value = (uint32_t) DEBIread(dev, k->MyLatchLsw);
2770 /* Fetch MSW of latched counts and combine with LSW. */
2771 value |= ((uint32_t) DEBIread(dev, k->MyLatchLsw + 2) << 16);
2773 /* DEBUG FIXME DEBUG("ReadLatch: Read Latch exit\n"); */
2775 /* Return latched counts. */
2779 /* Reset a counter's index and overflow event capture flags. */
2781 static void ResetCapFlags_A(struct comedi_device *dev, struct enc_private *k)
2783 DEBIreplace(dev, k->MyCRB, (uint16_t) (~CRBMSK_INTCTRL),
2784 CRBMSK_INTRESETCMD | CRBMSK_INTRESET_A);
2787 static void ResetCapFlags_B(struct comedi_device *dev, struct enc_private *k)
2789 DEBIreplace(dev, k->MyCRB, (uint16_t) (~CRBMSK_INTCTRL),
2790 CRBMSK_INTRESETCMD | CRBMSK_INTRESET_B);
2793 /* Return counter setup in a format (COUNTER_SETUP) that is consistent */
2794 /* for both A and B counters. */
2796 static uint16_t GetMode_A(struct comedi_device *dev, struct enc_private *k)
2798 register uint16_t cra;
2799 register uint16_t crb;
2800 register uint16_t setup;
2802 /* Fetch CRA and CRB register images. */
2803 cra = DEBIread(dev, k->MyCRA);
2804 crb = DEBIread(dev, k->MyCRB);
2806 /* Populate the standardized counter setup bit fields. Note: */
2807 /* IndexSrc is restricted to ENC_X or IndxPol. */
2808 setup = ((cra & STDMSK_LOADSRC) /* LoadSrc = LoadSrcA. */
2809 | ((crb << (STDBIT_LATCHSRC - CRBBIT_LATCHSRC)) & STDMSK_LATCHSRC) /* LatchSrc = LatchSrcA. */
2810 | ((cra << (STDBIT_INTSRC - CRABIT_INTSRC_A)) & STDMSK_INTSRC) /* IntSrc = IntSrcA. */
2811 | ((cra << (STDBIT_INDXSRC - (CRABIT_INDXSRC_A + 1))) & STDMSK_INDXSRC) /* IndxSrc = IndxSrcA<1>. */
2812 | ((cra >> (CRABIT_INDXPOL_A - STDBIT_INDXPOL)) & STDMSK_INDXPOL) /* IndxPol = IndxPolA. */
2813 | ((crb >> (CRBBIT_CLKENAB_A - STDBIT_CLKENAB)) & STDMSK_CLKENAB)); /* ClkEnab = ClkEnabA. */
2815 /* Adjust mode-dependent parameters. */
2816 if (cra & (2 << CRABIT_CLKSRC_A)) /* If Timer mode (ClkSrcA<1> == 1): */
2817 setup |= ((CLKSRC_TIMER << STDBIT_CLKSRC) /* Indicate Timer mode. */
2818 | ((cra << (STDBIT_CLKPOL - CRABIT_CLKSRC_A)) & STDMSK_CLKPOL) /* Set ClkPol to indicate count direction (ClkSrcA<0>). */
2819 | (MULT_X1 << STDBIT_CLKMULT)); /* ClkMult must be 1x in Timer mode. */
2821 else /* If Counter mode (ClkSrcA<1> == 0): */
2822 setup |= ((CLKSRC_COUNTER << STDBIT_CLKSRC) /* Indicate Counter mode. */
2823 | ((cra >> (CRABIT_CLKPOL_A - STDBIT_CLKPOL)) & STDMSK_CLKPOL) /* Pass through ClkPol. */
2824 | (((cra & CRAMSK_CLKMULT_A) == (MULT_X0 << CRABIT_CLKMULT_A)) ? /* Force ClkMult to 1x if not legal, else pass through. */
2825 (MULT_X1 << STDBIT_CLKMULT) :
2826 ((cra >> (CRABIT_CLKMULT_A -
2830 /* Return adjusted counter setup. */
2834 static uint16_t GetMode_B(struct comedi_device *dev, struct enc_private *k)
2836 register uint16_t cra;
2837 register uint16_t crb;
2838 register uint16_t setup;
2840 /* Fetch CRA and CRB register images. */
2841 cra = DEBIread(dev, k->MyCRA);
2842 crb = DEBIread(dev, k->MyCRB);
2844 /* Populate the standardized counter setup bit fields. Note: */
2845 /* IndexSrc is restricted to ENC_X or IndxPol. */
2846 setup = (((crb << (STDBIT_INTSRC - CRBBIT_INTSRC_B)) & STDMSK_INTSRC) /* IntSrc = IntSrcB. */
2847 | ((crb << (STDBIT_LATCHSRC - CRBBIT_LATCHSRC)) & STDMSK_LATCHSRC) /* LatchSrc = LatchSrcB. */
2848 | ((crb << (STDBIT_LOADSRC - CRBBIT_LOADSRC_B)) & STDMSK_LOADSRC) /* LoadSrc = LoadSrcB. */
2849 | ((crb << (STDBIT_INDXPOL - CRBBIT_INDXPOL_B)) & STDMSK_INDXPOL) /* IndxPol = IndxPolB. */
2850 | ((crb >> (CRBBIT_CLKENAB_B - STDBIT_CLKENAB)) & STDMSK_CLKENAB) /* ClkEnab = ClkEnabB. */
2851 | ((cra >> ((CRABIT_INDXSRC_B + 1) - STDBIT_INDXSRC)) & STDMSK_INDXSRC)); /* IndxSrc = IndxSrcB<1>. */
2853 /* Adjust mode-dependent parameters. */
2854 if ((crb & CRBMSK_CLKMULT_B) == (MULT_X0 << CRBBIT_CLKMULT_B)) /* If Extender mode (ClkMultB == MULT_X0): */
2855 setup |= ((CLKSRC_EXTENDER << STDBIT_CLKSRC) /* Indicate Extender mode. */
2856 | (MULT_X1 << STDBIT_CLKMULT) /* Indicate multiplier is 1x. */
2857 | ((cra >> (CRABIT_CLKSRC_B - STDBIT_CLKPOL)) & STDMSK_CLKPOL)); /* Set ClkPol equal to Timer count direction (ClkSrcB<0>). */
2859 else if (cra & (2 << CRABIT_CLKSRC_B)) /* If Timer mode (ClkSrcB<1> == 1): */
2860 setup |= ((CLKSRC_TIMER << STDBIT_CLKSRC) /* Indicate Timer mode. */
2861 | (MULT_X1 << STDBIT_CLKMULT) /* Indicate multiplier is 1x. */
2862 | ((cra >> (CRABIT_CLKSRC_B - STDBIT_CLKPOL)) & STDMSK_CLKPOL)); /* Set ClkPol equal to Timer count direction (ClkSrcB<0>). */
2864 else /* If Counter mode (ClkSrcB<1> == 0): */
2865 setup |= ((CLKSRC_COUNTER << STDBIT_CLKSRC) /* Indicate Timer mode. */
2866 | ((crb >> (CRBBIT_CLKMULT_B - STDBIT_CLKMULT)) & STDMSK_CLKMULT) /* Clock multiplier is passed through. */
2867 | ((crb << (STDBIT_CLKPOL - CRBBIT_CLKPOL_B)) & STDMSK_CLKPOL)); /* Clock polarity is passed through. */
2869 /* Return adjusted counter setup. */
2874 * Set the operating mode for the specified counter. The setup
2875 * parameter is treated as a COUNTER_SETUP data type. The following
2876 * parameters are programmable (all other parms are ignored): ClkMult,
2877 * ClkPol, ClkEnab, IndexSrc, IndexPol, LoadSrc.
2880 static void SetMode_A(struct comedi_device *dev, struct enc_private *k, uint16_t Setup,
2881 uint16_t DisableIntSrc)
2883 register uint16_t cra;
2884 register uint16_t crb;
2885 register uint16_t setup = Setup; /* Cache the Standard Setup. */
2887 /* Initialize CRA and CRB images. */
2888 cra = ((setup & CRAMSK_LOADSRC_A) /* Preload trigger is passed through. */
2889 | ((setup & STDMSK_INDXSRC) >> (STDBIT_INDXSRC - (CRABIT_INDXSRC_A + 1)))); /* IndexSrc is restricted to ENC_X or IndxPol. */
2891 crb = (CRBMSK_INTRESETCMD | CRBMSK_INTRESET_A /* Reset any pending CounterA event captures. */
2892 | ((setup & STDMSK_CLKENAB) << (CRBBIT_CLKENAB_A - STDBIT_CLKENAB))); /* Clock enable is passed through. */
2894 /* Force IntSrc to Disabled if DisableIntSrc is asserted. */
2896 cra |= ((setup & STDMSK_INTSRC) >> (STDBIT_INTSRC -
2899 /* Populate all mode-dependent attributes of CRA & CRB images. */
2900 switch ((setup & STDMSK_CLKSRC) >> STDBIT_CLKSRC) {
2901 case CLKSRC_EXTENDER: /* Extender Mode: Force to Timer mode */
2902 /* (Extender valid only for B counters). */
2904 case CLKSRC_TIMER: /* Timer Mode: */
2905 cra |= ((2 << CRABIT_CLKSRC_A) /* ClkSrcA<1> selects system clock */
2906 | ((setup & STDMSK_CLKPOL) >> (STDBIT_CLKPOL - CRABIT_CLKSRC_A)) /* with count direction (ClkSrcA<0>) obtained from ClkPol. */
2907 | (1 << CRABIT_CLKPOL_A) /* ClkPolA behaves as always-on clock enable. */
2908 | (MULT_X1 << CRABIT_CLKMULT_A)); /* ClkMult must be 1x. */
2911 default: /* Counter Mode: */
2912 cra |= (CLKSRC_COUNTER /* Select ENC_C and ENC_D as clock/direction inputs. */
2913 | ((setup & STDMSK_CLKPOL) << (CRABIT_CLKPOL_A - STDBIT_CLKPOL)) /* Clock polarity is passed through. */
2914 | (((setup & STDMSK_CLKMULT) == (MULT_X0 << STDBIT_CLKMULT)) ? /* Force multiplier to x1 if not legal, otherwise pass through. */
2915 (MULT_X1 << CRABIT_CLKMULT_A) :
2916 ((setup & STDMSK_CLKMULT) << (CRABIT_CLKMULT_A -
2920 /* Force positive index polarity if IndxSrc is software-driven only, */
2921 /* otherwise pass it through. */
2922 if (~setup & STDMSK_INDXSRC)
2923 cra |= ((setup & STDMSK_INDXPOL) << (CRABIT_INDXPOL_A -
2926 /* If IntSrc has been forced to Disabled, update the MISC2 interrupt */
2927 /* enable mask to indicate the counter interrupt is disabled. */
2929 devpriv->CounterIntEnabs &= ~k->MyEventBits[3];
2931 /* While retaining CounterB and LatchSrc configurations, program the */
2932 /* new counter operating mode. */
2933 DEBIreplace(dev, k->MyCRA, CRAMSK_INDXSRC_B | CRAMSK_CLKSRC_B, cra);
2934 DEBIreplace(dev, k->MyCRB,
2935 (uint16_t) (~(CRBMSK_INTCTRL | CRBMSK_CLKENAB_A)), crb);
2938 static void SetMode_B(struct comedi_device *dev, struct enc_private *k, uint16_t Setup,
2939 uint16_t DisableIntSrc)
2941 register uint16_t cra;
2942 register uint16_t crb;
2943 register uint16_t setup = Setup; /* Cache the Standard Setup. */
2945 /* Initialize CRA and CRB images. */
2946 cra = ((setup & STDMSK_INDXSRC) << ((CRABIT_INDXSRC_B + 1) - STDBIT_INDXSRC)); /* IndexSrc field is restricted to ENC_X or IndxPol. */
2948 crb = (CRBMSK_INTRESETCMD | CRBMSK_INTRESET_B /* Reset event captures and disable interrupts. */
2949 | ((setup & STDMSK_CLKENAB) << (CRBBIT_CLKENAB_B - STDBIT_CLKENAB)) /* Clock enable is passed through. */
2950 | ((setup & STDMSK_LOADSRC) >> (STDBIT_LOADSRC - CRBBIT_LOADSRC_B))); /* Preload trigger source is passed through. */
2952 /* Force IntSrc to Disabled if DisableIntSrc is asserted. */
2954 crb |= ((setup & STDMSK_INTSRC) >> (STDBIT_INTSRC -
2957 /* Populate all mode-dependent attributes of CRA & CRB images. */
2958 switch ((setup & STDMSK_CLKSRC) >> STDBIT_CLKSRC) {
2959 case CLKSRC_TIMER: /* Timer Mode: */
2960 cra |= ((2 << CRABIT_CLKSRC_B) /* ClkSrcB<1> selects system clock */
2961 | ((setup & STDMSK_CLKPOL) << (CRABIT_CLKSRC_B - STDBIT_CLKPOL))); /* with direction (ClkSrcB<0>) obtained from ClkPol. */
2962 crb |= ((1 << CRBBIT_CLKPOL_B) /* ClkPolB behaves as always-on clock enable. */
2963 | (MULT_X1 << CRBBIT_CLKMULT_B)); /* ClkMultB must be 1x. */
2966 case CLKSRC_EXTENDER: /* Extender Mode: */
2967 cra |= ((2 << CRABIT_CLKSRC_B) /* ClkSrcB source is OverflowA (same as "timer") */
2968 | ((setup & STDMSK_CLKPOL) << (CRABIT_CLKSRC_B - STDBIT_CLKPOL))); /* with direction obtained from ClkPol. */
2969 crb |= ((1 << CRBBIT_CLKPOL_B) /* ClkPolB controls IndexB -- always set to active. */
2970 | (MULT_X0 << CRBBIT_CLKMULT_B)); /* ClkMultB selects OverflowA as the clock source. */
2973 default: /* Counter Mode: */
2974 cra |= (CLKSRC_COUNTER << CRABIT_CLKSRC_B); /* Select ENC_C and ENC_D as clock/direction inputs. */
2975 crb |= (((setup & STDMSK_CLKPOL) >> (STDBIT_CLKPOL - CRBBIT_CLKPOL_B)) /* ClkPol is passed through. */
2976 | (((setup & STDMSK_CLKMULT) == (MULT_X0 << STDBIT_CLKMULT)) ? /* Force ClkMult to x1 if not legal, otherwise pass through. */
2977 (MULT_X1 << CRBBIT_CLKMULT_B) :
2978 ((setup & STDMSK_CLKMULT) << (CRBBIT_CLKMULT_B -
2982 /* Force positive index polarity if IndxSrc is software-driven only, */
2983 /* otherwise pass it through. */
2984 if (~setup & STDMSK_INDXSRC)
2985 crb |= ((setup & STDMSK_INDXPOL) >> (STDBIT_INDXPOL -
2988 /* If IntSrc has been forced to Disabled, update the MISC2 interrupt */
2989 /* enable mask to indicate the counter interrupt is disabled. */
2991 devpriv->CounterIntEnabs &= ~k->MyEventBits[3];
2993 /* While retaining CounterA and LatchSrc configurations, program the */
2994 /* new counter operating mode. */
2995 DEBIreplace(dev, k->MyCRA,
2996 (uint16_t) (~(CRAMSK_INDXSRC_B | CRAMSK_CLKSRC_B)), cra);
2997 DEBIreplace(dev, k->MyCRB, CRBMSK_CLKENAB_A | CRBMSK_LATCHSRC, crb);
3000 /* Return/set a counter's enable. enab: 0=always enabled, 1=enabled by index. */
3002 static void SetEnable_A(struct comedi_device *dev, struct enc_private *k, uint16_t enab)
3004 DEBUG("SetEnable_A: SetEnable_A enter 3541\n");
3005 DEBIreplace(dev, k->MyCRB,
3006 (uint16_t) (~(CRBMSK_INTCTRL | CRBMSK_CLKENAB_A)),
3007 (uint16_t) (enab << CRBBIT_CLKENAB_A));
3010 static void SetEnable_B(struct comedi_device *dev, struct enc_private *k, uint16_t enab)
3012 DEBIreplace(dev, k->MyCRB,
3013 (uint16_t) (~(CRBMSK_INTCTRL | CRBMSK_CLKENAB_B)),
3014 (uint16_t) (enab << CRBBIT_CLKENAB_B));
3017 static uint16_t GetEnable_A(struct comedi_device *dev, struct enc_private *k)
3019 return (DEBIread(dev, k->MyCRB) >> CRBBIT_CLKENAB_A) & 1;
3022 static uint16_t GetEnable_B(struct comedi_device *dev, struct enc_private *k)
3024 return (DEBIread(dev, k->MyCRB) >> CRBBIT_CLKENAB_B) & 1;
3027 /* Return/set a counter pair's latch trigger source. 0: On read
3028 * access, 1: A index latches A, 2: B index latches B, 3: A overflow
3032 static void SetLatchSource(struct comedi_device *dev, struct enc_private *k, uint16_t value)
3034 DEBUG("SetLatchSource: SetLatchSource enter 3550 \n");
3035 DEBIreplace(dev, k->MyCRB,
3036 (uint16_t) (~(CRBMSK_INTCTRL | CRBMSK_LATCHSRC)),
3037 (uint16_t) (value << CRBBIT_LATCHSRC));
3039 DEBUG("SetLatchSource: SetLatchSource exit \n");
3043 * static uint16_t GetLatchSource(struct comedi_device *dev, struct enc_private *k )
3045 * return ( DEBIread( dev, k->MyCRB) >> CRBBIT_LATCHSRC ) & 3;
3050 * Return/set the event that will trigger transfer of the preload
3051 * register into the counter. 0=ThisCntr_Index, 1=ThisCntr_Overflow,
3052 * 2=OverflowA (B counters only), 3=disabled.
3055 static void SetLoadTrig_A(struct comedi_device *dev, struct enc_private *k, uint16_t Trig)
3057 DEBIreplace(dev, k->MyCRA, (uint16_t) (~CRAMSK_LOADSRC_A),
3058 (uint16_t) (Trig << CRABIT_LOADSRC_A));
3061 static void SetLoadTrig_B(struct comedi_device *dev, struct enc_private *k, uint16_t Trig)
3063 DEBIreplace(dev, k->MyCRB,
3064 (uint16_t) (~(CRBMSK_LOADSRC_B | CRBMSK_INTCTRL)),
3065 (uint16_t) (Trig << CRBBIT_LOADSRC_B));
3068 static uint16_t GetLoadTrig_A(struct comedi_device *dev, struct enc_private *k)
3070 return (DEBIread(dev, k->MyCRA) >> CRABIT_LOADSRC_A) & 3;
3073 static uint16_t GetLoadTrig_B(struct comedi_device *dev, struct enc_private *k)
3075 return (DEBIread(dev, k->MyCRB) >> CRBBIT_LOADSRC_B) & 3;
3078 /* Return/set counter interrupt source and clear any captured
3079 * index/overflow events. IntSource: 0=Disabled, 1=OverflowOnly,
3080 * 2=IndexOnly, 3=IndexAndOverflow.
3083 static void SetIntSrc_A(struct comedi_device *dev, struct enc_private *k,
3086 /* Reset any pending counter overflow or index captures. */
3087 DEBIreplace(dev, k->MyCRB, (uint16_t) (~CRBMSK_INTCTRL),
3088 CRBMSK_INTRESETCMD | CRBMSK_INTRESET_A);
3090 /* Program counter interrupt source. */
3091 DEBIreplace(dev, k->MyCRA, ~CRAMSK_INTSRC_A,
3092 (uint16_t) (IntSource << CRABIT_INTSRC_A));
3094 /* Update MISC2 interrupt enable mask. */
3095 devpriv->CounterIntEnabs =
3096 (devpriv->CounterIntEnabs & ~k->MyEventBits[3]) | k->
3097 MyEventBits[IntSource];
3100 static void SetIntSrc_B(struct comedi_device *dev, struct enc_private *k,
3105 /* Cache writeable CRB register image. */
3106 crb = DEBIread(dev, k->MyCRB) & ~CRBMSK_INTCTRL;
3108 /* Reset any pending counter overflow or index captures. */
3109 DEBIwrite(dev, k->MyCRB,
3110 (uint16_t) (crb | CRBMSK_INTRESETCMD | CRBMSK_INTRESET_B));
3112 /* Program counter interrupt source. */
3113 DEBIwrite(dev, k->MyCRB,
3114 (uint16_t) ((crb & ~CRBMSK_INTSRC_B) | (IntSource <<
3117 /* Update MISC2 interrupt enable mask. */
3118 devpriv->CounterIntEnabs =
3119 (devpriv->CounterIntEnabs & ~k->MyEventBits[3]) | k->
3120 MyEventBits[IntSource];
3123 static uint16_t GetIntSrc_A(struct comedi_device *dev, struct enc_private *k)
3125 return (DEBIread(dev, k->MyCRA) >> CRABIT_INTSRC_A) & 3;
3128 static uint16_t GetIntSrc_B(struct comedi_device *dev, struct enc_private *k)
3130 return (DEBIread(dev, k->MyCRB) >> CRBBIT_INTSRC_B) & 3;
3133 /* Return/set the clock multiplier. */
3135 /* static void SetClkMult(struct comedi_device *dev, struct enc_private *k, uint16_t value ) */
3137 /* k->SetMode(dev, k, (uint16_t)( ( k->GetMode(dev, k ) & ~STDMSK_CLKMULT ) | ( value << STDBIT_CLKMULT ) ), FALSE ); */
3140 /* static uint16_t GetClkMult(struct comedi_device *dev, struct enc_private *k ) */
3142 /* return ( k->GetMode(dev, k ) >> STDBIT_CLKMULT ) & 3; */
3145 /* Return/set the clock polarity. */
3147 /* static void SetClkPol( struct comedi_device *dev,struct enc_private *k, uint16_t value ) */
3149 /* k->SetMode(dev, k, (uint16_t)( ( k->GetMode(dev, k ) & ~STDMSK_CLKPOL ) | ( value << STDBIT_CLKPOL ) ), FALSE ); */
3152 /* static uint16_t GetClkPol(struct comedi_device *dev, struct enc_private *k ) */
3154 /* return ( k->GetMode(dev, k ) >> STDBIT_CLKPOL ) & 1; */
3157 /* Return/set the clock source. */
3159 /* static void SetClkSrc( struct comedi_device *dev,struct enc_private *k, uint16_t value ) */
3161 /* k->SetMode(dev, k, (uint16_t)( ( k->GetMode(dev, k ) & ~STDMSK_CLKSRC ) | ( value << STDBIT_CLKSRC ) ), FALSE ); */
3164 /* static uint16_t GetClkSrc( struct comedi_device *dev,struct enc_private *k ) */
3166 /* return ( k->GetMode(dev, k ) >> STDBIT_CLKSRC ) & 3; */
3169 /* Return/set the index polarity. */
3171 /* static void SetIndexPol(struct comedi_device *dev, struct enc_private *k, uint16_t value ) */
3173 /* k->SetMode(dev, k, (uint16_t)( ( k->GetMode(dev, k ) & ~STDMSK_INDXPOL ) | ( (value != 0) << STDBIT_INDXPOL ) ), FALSE ); */
3176 /* static uint16_t GetIndexPol(struct comedi_device *dev, struct enc_private *k ) */
3178 /* return ( k->GetMode(dev, k ) >> STDBIT_INDXPOL ) & 1; */
3181 /* Return/set the index source. */
3183 /* static void SetIndexSrc(struct comedi_device *dev, struct enc_private *k, uint16_t value ) */
3185 /* DEBUG("SetIndexSrc: set index src enter 3700\n"); */
3186 /* k->SetMode(dev, k, (uint16_t)( ( k->GetMode(dev, k ) & ~STDMSK_INDXSRC ) | ( (value != 0) << STDBIT_INDXSRC ) ), FALSE ); */
3189 /* static uint16_t GetIndexSrc(struct comedi_device *dev, struct enc_private *k ) */
3191 /* return ( k->GetMode(dev, k ) >> STDBIT_INDXSRC ) & 1; */
3194 /* Generate an index pulse. */
3196 static void PulseIndex_A(struct comedi_device *dev, struct enc_private *k)
3198 register uint16_t cra;
3200 DEBUG("PulseIndex_A: pulse index enter\n");
3202 cra = DEBIread(dev, k->MyCRA); /* Pulse index. */
3203 DEBIwrite(dev, k->MyCRA, (uint16_t) (cra ^ CRAMSK_INDXPOL_A));
3204 DEBUG("PulseIndex_A: pulse index step1\n");
3205 DEBIwrite(dev, k->MyCRA, cra);
3208 static void PulseIndex_B(struct comedi_device *dev, struct enc_private *k)
3210 register uint16_t crb;
3212 crb = DEBIread(dev, k->MyCRB) & ~CRBMSK_INTCTRL; /* Pulse index. */
3213 DEBIwrite(dev, k->MyCRB, (uint16_t) (crb ^ CRBMSK_INDXPOL_B));
3214 DEBIwrite(dev, k->MyCRB, crb);
3217 /* Write value into counter preload register. */
3219 static void Preload(struct comedi_device *dev, struct enc_private *k, uint32_t value)
3221 DEBUG("Preload: preload enter\n");
3222 DEBIwrite(dev, (uint16_t) (k->MyLatchLsw), (uint16_t) value); /* Write value to preload register. */
3223 DEBUG("Preload: preload step 1\n");
3224 DEBIwrite(dev, (uint16_t) (k->MyLatchLsw + 2),
3225 (uint16_t) (value >> 16));
3228 static void CountersInit(struct comedi_device *dev)
3231 struct enc_private *k;
3232 uint16_t Setup = (LOADSRC_INDX << BF_LOADSRC) | /* Preload upon */
3234 (INDXSRC_SOFT << BF_INDXSRC) | /* Disable hardware index. */
3235 (CLKSRC_COUNTER << BF_CLKSRC) | /* Operating mode is counter. */
3236 (CLKPOL_POS << BF_CLKPOL) | /* Active high clock. */
3237 (CNTDIR_UP << BF_CLKPOL) | /* Count direction is up. */
3238 (CLKMULT_1X << BF_CLKMULT) | /* Clock multiplier is 1x. */
3239 (CLKENAB_INDEX << BF_CLKENAB); /* Enabled by index */
3241 /* Disable all counter interrupts and clear any captured counter events. */
3242 for (chan = 0; chan < S626_ENCODER_CHANNELS; chan++) {
3244 k->SetMode(dev, k, Setup, TRUE);
3245 k->SetIntSrc(dev, k, 0);
3246 k->ResetCapFlags(dev, k);
3247 k->SetEnable(dev, k, CLKENAB_ALWAYS);
3249 DEBUG("CountersInit: counters initialized \n");