drivers/scsi/scsi_transport_spi.c

   1 /*
   2  *  Parallel SCSI (SPI) transport specific attributes exported to sysfs.
   3  *
   4  *  Copyright (c) 2003 Silicon Graphics, Inc.  All rights reserved.
   5  *  Copyright (c) 2004, 2005 James Bottomley <James.Bottomley@SteelEye.com>
   6  *
   7  *  This program is free software; you can redistribute it and/or modify
   8  *  it under the terms of the GNU General Public License as published by
   9  *  the Free Software Foundation; either version 2 of the License, or
  10  *  (at your option) any later version.
  11  *
  12  *  This program is distributed in the hope that it will be useful,
  13  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15  *  GNU General Public License for more details.
  16  *
  17  *  You should have received a copy of the GNU General Public License
  18  *  along with this program; if not, write to the Free Software
  19  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  20  */
  21 #include <linux/ctype.h>
  22 #include <linux/init.h>
  23 #include <linux/module.h>
  24 #include <linux/workqueue.h>
  25 #include <linux/blkdev.h>
  26 #include <linux/mutex.h>
  27 #include <linux/sysfs.h>
  28 #include <linux/slab.h>
  29 #include <scsi/scsi.h>
  30 #include "scsi_priv.h"
  31 #include <scsi/scsi_device.h>
  32 #include <scsi/scsi_host.h>
  33 #include <scsi/scsi_cmnd.h>
  34 #include <scsi/scsi_eh.h>
  35 #include <scsi/scsi_transport.h>
  36 #include <scsi/scsi_transport_spi.h>
  37
  38 #define SPI_NUM_ATTRS 14        /* increase this if you add attributes */
  39 #define SPI_OTHER_ATTRS 1       /* Increase this if you add "always
  40                                  * on" attributes */
  41 #define SPI_HOST_ATTRS  1
  42
  43 #define SPI_MAX_ECHO_BUFFER_SIZE        4096
  44
  45 #define DV_LOOPS        3
  46 #define DV_TIMEOUT      (10*HZ)
  47 #define DV_RETRIES      3       /* should only need at most
  48                                  * two cc/ua clears */
  49
  50 /* Our blacklist flags */
  51 enum {
  52         SPI_BLIST_NOIUS = 0x1,
  53 };
  54
  55 /* blacklist table, modelled on scsi_devinfo.c */
  56 static struct {
  57         char *vendor;
  58         char *model;
  59         unsigned flags;
  60 } spi_static_device_list[] __initdata = {
  61         {"HP", "Ultrium 3-SCSI", SPI_BLIST_NOIUS },
  62         {"IBM", "ULTRIUM-TD3", SPI_BLIST_NOIUS },
  63         {NULL, NULL, 0}
  64 };
  65
  66 /* Private data accessors (keep these out of the header file) */
  67 #define spi_dv_in_progress(x) (((struct spi_transport_attrs *)&(x)->starget_data)->dv_in_progress)
  68 #define spi_dv_mutex(x) (((struct spi_transport_attrs *)&(x)->starget_data)->dv_mutex)
  69
  70 struct spi_internal {
  71         struct scsi_transport_template t;
  72         struct spi_function_template *f;
  73 };
  74
  75 #define to_spi_internal(tmpl)   container_of(tmpl, struct spi_internal, t)
  76
  77 static const int ppr_to_ps[] = {
  78         /* The PPR values 0-6 are reserved, fill them in when
  79          * the committee defines them */
  80         -1,                     /* 0x00 */
  81         -1,                     /* 0x01 */
  82         -1,                     /* 0x02 */
  83         -1,                     /* 0x03 */
  84         -1,                     /* 0x04 */
  85         -1,                     /* 0x05 */
  86         -1,                     /* 0x06 */
  87          3125,                  /* 0x07 */
  88          6250,                  /* 0x08 */
  89         12500,                  /* 0x09 */
  90         25000,                  /* 0x0a */
  91         30300,                  /* 0x0b */
  92         50000,                  /* 0x0c */
  93 };
  94 /* The PPR values at which you calculate the period in ns by multiplying
  95  * by 4 */
  96 #define SPI_STATIC_PPR  0x0c
  97
  98 static int sprint_frac(char *dest, int value, int denom)
  99 {
 100         int frac = value % denom;
 101         int result = sprintf(dest, "%d", value / denom);
 102
 103         if (frac == 0)
 104                 return result;
 105         dest[result++] = '.';
 106
 107         do {
 108                 denom /= 10;
 109                 sprintf(dest + result, "%d", frac / denom);
 110                 result++;
 111                 frac %= denom;
 112         } while (frac);
 113
 114         dest[result++] = '\0';
 115         return result;
 116 }
 117
 118 static int spi_execute(struct scsi_device *sdev, const void *cmd,
 119                        enum dma_data_direction dir,
 120                        void *buffer, unsigned bufflen,
 121                        struct scsi_sense_hdr *sshdr)
 122 {
 123         int i, result;
 124         unsigned char sense[SCSI_SENSE_BUFFERSIZE];
 125
 126         for(i = 0; i < DV_RETRIES; i++) {
 127                 result = scsi_execute(sdev, cmd, dir, buffer, bufflen,
 128                                       sense, DV_TIMEOUT, /* retries */ 1,
 129                                       REQ_FAILFAST_DEV |
 130                                       REQ_FAILFAST_TRANSPORT |
 131                                       REQ_FAILFAST_DRIVER,
 132                                       NULL);
 133                 if (driver_byte(result) & DRIVER_SENSE) {
 134                         struct scsi_sense_hdr sshdr_tmp;
 135                         if (!sshdr)
 136                                 sshdr = &sshdr_tmp;
 137
 138                         if (scsi_normalize_sense(sense, SCSI_SENSE_BUFFERSIZE,
 139                                                  sshdr)
 140                             && sshdr->sense_key == UNIT_ATTENTION)
 141                                 continue;
 142                 }
 143                 break;
 144         }
 145         return result;
 146 }
 147
 148 static struct {
 149         enum spi_signal_type    value;
 150         char                    *name;
 151 } signal_types[] = {
 152         { SPI_SIGNAL_UNKNOWN, "unknown" },
 153         { SPI_SIGNAL_SE, "SE" },
 154         { SPI_SIGNAL_LVD, "LVD" },
 155         { SPI_SIGNAL_HVD, "HVD" },
 156 };
 157
 158 static inline const char *spi_signal_to_string(enum spi_signal_type type)
 159 {
 160         int i;
 161
 162         for (i = 0; i < ARRAY_SIZE(signal_types); i++) {
 163                 if (type == signal_types[i].value)
 164                         return signal_types[i].name;
 165         }
 166         return NULL;
 167 }
 168 static inline enum spi_signal_type spi_signal_to_value(const char *name)
 169 {
 170         int i, len;
 171
 172         for (i = 0; i < ARRAY_SIZE(signal_types); i++) {
 173                 len =  strlen(signal_types[i].name);
 174                 if (strncmp(name, signal_types[i].name, len) == 0 &&
 175                     (name[len] == '\n' || name[len] == '\0'))
 176                         return signal_types[i].value;
 177         }
 178         return SPI_SIGNAL_UNKNOWN;
 179 }
 180
 181 static int spi_host_setup(struct transport_container *tc, struct device *dev,
 182                           struct device *cdev)
 183 {
 184         struct Scsi_Host *shost = dev_to_shost(dev);
 185
 186         spi_signalling(shost) = SPI_SIGNAL_UNKNOWN;
 187
 188         return 0;
 189 }
 190
 191 static int spi_host_configure(struct transport_container *tc,
 192                               struct device *dev,
 193                               struct device *cdev);
 194
 195 static DECLARE_TRANSPORT_CLASS(spi_host_class,
 196                                "spi_host",
 197                                spi_host_setup,
 198                                NULL,
 199                                spi_host_configure);
 200
 201 static int spi_host_match(struct attribute_container *cont,
 202                           struct device *dev)
 203 {
 204         struct Scsi_Host *shost;
 205
 206         if (!scsi_is_host_device(dev))
 207                 return 0;
 208
 209         shost = dev_to_shost(dev);
 210         if (!shost->transportt  || shost->transportt->host_attrs.ac.class
 211             != &spi_host_class.class)
 212                 return 0;
 213
 214         return &shost->transportt->host_attrs.ac == cont;
 215 }
 216
 217 static int spi_target_configure(struct transport_container *tc,
 218                                 struct device *dev,
 219                                 struct device *cdev);
 220
 221 static int spi_device_configure(struct transport_container *tc,
 222                                 struct device *dev,
 223                                 struct device *cdev)
 224 {
 225         struct scsi_device *sdev = to_scsi_device(dev);
 226         struct scsi_target *starget = sdev->sdev_target;
 227         unsigned bflags = scsi_get_device_flags_keyed(sdev, &sdev->inquiry[8],
 228                                                       &sdev->inquiry[16],
 229                                                       SCSI_DEVINFO_SPI);
 230
 231         /* Populate the target capability fields with the values
 232          * gleaned from the device inquiry */
 233
 234         spi_support_sync(starget) = scsi_device_sync(sdev);
 235         spi_support_wide(starget) = scsi_device_wide(sdev);
 236         spi_support_dt(starget) = scsi_device_dt(sdev);
 237         spi_support_dt_only(starget) = scsi_device_dt_only(sdev);
 238         spi_support_ius(starget) = scsi_device_ius(sdev);
 239         if (bflags & SPI_BLIST_NOIUS) {
 240                 dev_info(dev, "Information Units disabled by blacklist\n");
 241                 spi_support_ius(starget) = 0;
 242         }
 243         spi_support_qas(starget) = scsi_device_qas(sdev);
 244
 245         return 0;
 246 }
 247
 248 static int spi_setup_transport_attrs(struct transport_container *tc,
 249                                      struct device *dev,
 250                                      struct device *cdev)
 251 {
 252         struct scsi_target *starget = to_scsi_target(dev);
 253
 254         spi_period(starget) = -1;       /* illegal value */
 255         spi_min_period(starget) = 0;
 256         spi_offset(starget) = 0;        /* async */
 257         spi_max_offset(starget) = 255;
 258         spi_width(starget) = 0; /* narrow */
 259         spi_max_width(starget) = 1;
 260         spi_iu(starget) = 0;    /* no IU */
 261         spi_max_iu(starget) = 1;
 262         spi_dt(starget) = 0;    /* ST */
 263         spi_qas(starget) = 0;
 264         spi_max_qas(starget) = 1;
 265         spi_wr_flow(starget) = 0;
 266         spi_rd_strm(starget) = 0;
 267         spi_rti(starget) = 0;
 268         spi_pcomp_en(starget) = 0;
 269         spi_hold_mcs(starget) = 0;
 270         spi_dv_pending(starget) = 0;
 271         spi_dv_in_progress(starget) = 0;
 272         spi_initial_dv(starget) = 0;
 273         mutex_init(&spi_dv_mutex(starget));
 274
 275         return 0;
 276 }
 277
 278 #define spi_transport_show_simple(field, format_string)                 \
 279                                                                         \
 280 static ssize_t                                                          \
 281 show_spi_transport_##field(struct device *dev,                  \
 282                            struct device_attribute *attr, char *buf)    \
 283 {                                                                       \
 284         struct scsi_target *starget = transport_class_to_starget(dev);  \
 285         struct spi_transport_attrs *tp;                                 \
 286                                                                         \
 287         tp = (struct spi_transport_attrs *)&starget->starget_data;      \
 288         return snprintf(buf, 20, format_string, tp->field);             \
 289 }
 290
 291 #define spi_transport_store_simple(field, format_string)                \
 292                                                                         \
 293 static ssize_t                                                          \
 294 store_spi_transport_##field(struct device *dev,                         \
 295                             struct device_attribute *attr,              \
 296                             const char *buf, size_t count)              \
 297 {                                                                       \
 298         int val;                                                        \
 299         struct scsi_target *starget = transport_class_to_starget(dev);  \
 300         struct spi_transport_attrs *tp;                                 \
 301                                                                         \
 302         tp = (struct spi_transport_attrs *)&starget->starget_data;      \
 303         val = simple_strtoul(buf, NULL, 0);                             \
 304         tp->field = val;                                                \
 305         return count;                                                   \
 306 }
 307
 308 #define spi_transport_show_function(field, format_string)               \
 309                                                                         \
 310 static ssize_t                                                          \
 311 show_spi_transport_##field(struct device *dev,                  \
 312                            struct device_attribute *attr, char *buf)    \
 313 {                                                                       \
 314         struct scsi_target *starget = transport_class_to_starget(dev);  \
 315         struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);    \
 316         struct spi_transport_attrs *tp;                                 \
 317         struct spi_internal *i = to_spi_internal(shost->transportt);    \
 318         tp = (struct spi_transport_attrs *)&starget->starget_data;      \
 319         if (i->f->get_##field)                                          \
 320                 i->f->get_##field(starget);                             \
 321         return snprintf(buf, 20, format_string, tp->field);             \
 322 }
 323
 324 #define spi_transport_store_function(field, format_string)              \
 325 static ssize_t                                                          \
 326 store_spi_transport_##field(struct device *dev,                         \
 327                             struct device_attribute *attr,              \
 328                             const char *buf, size_t count)              \
 329 {                                                                       \
 330         int val;                                                        \
 331         struct scsi_target *starget = transport_class_to_starget(dev);  \
 332         struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);    \
 333         struct spi_internal *i = to_spi_internal(shost->transportt);    \
 334                                                                         \
 335         if (!i->f->set_##field)                                         \
 336                 return -EINVAL;                                         \
 337         val = simple_strtoul(buf, NULL, 0);                             \
 338         i->f->set_##field(starget, val);                                \
 339         return count;                                                   \
 340 }
 341
 342 #define spi_transport_store_max(field, format_string)                   \
 343 static ssize_t                                                          \
 344 store_spi_transport_##field(struct device *dev,                         \
 345                             struct device_attribute *attr,              \
 346                             const char *buf, size_t count)              \
 347 {                                                                       \
 348         int val;                                                        \
 349         struct scsi_target *starget = transport_class_to_starget(dev);  \
 350         struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);    \
 351         struct spi_internal *i = to_spi_internal(shost->transportt);    \
 352         struct spi_transport_attrs *tp                                  \
 353                 = (struct spi_transport_attrs *)&starget->starget_data; \
 354                                                                         \
 355         if (i->f->set_##field)                                          \
 356                 return -EINVAL;                                         \
 357         val = simple_strtoul(buf, NULL, 0);                             \
 358         if (val > tp->max_##field)                                      \
 359                 val = tp->max_##field;                                  \
 360         i->f->set_##field(starget, val);                                \
 361         return count;                                                   \
 362 }
 363
 364 #define spi_transport_rd_attr(field, format_string)                     \
 365         spi_transport_show_function(field, format_string)               \
 366         spi_transport_store_function(field, format_string)              \
 367 static DEVICE_ATTR(field, S_IRUGO,                              \
 368                    show_spi_transport_##field,                  \
 369                    store_spi_transport_##field);
 370
 371 #define spi_transport_simple_attr(field, format_string)                 \
 372         spi_transport_show_simple(field, format_string)                 \
 373         spi_transport_store_simple(field, format_string)                \
 374 static DEVICE_ATTR(field, S_IRUGO,                              \
 375                    show_spi_transport_##field,                  \
 376                    store_spi_transport_##field);
 377
 378 #define spi_transport_max_attr(field, format_string)                    \
 379         spi_transport_show_function(field, format_string)               \
 380         spi_transport_store_max(field, format_string)                   \
 381         spi_transport_simple_attr(max_##field, format_string)           \
 382 static DEVICE_ATTR(field, S_IRUGO,                              \
 383                    show_spi_transport_##field,                  \
 384                    store_spi_transport_##field);
 385
 386 /* The Parallel SCSI Tranport Attributes: */
 387 spi_transport_max_attr(offset, "%d\n");
 388 spi_transport_max_attr(width, "%d\n");
 389 spi_transport_max_attr(iu, "%d\n");
 390 spi_transport_rd_attr(dt, "%d\n");
 391 spi_transport_max_attr(qas, "%d\n");
 392 spi_transport_rd_attr(wr_flow, "%d\n");
 393 spi_transport_rd_attr(rd_strm, "%d\n");
 394 spi_transport_rd_attr(rti, "%d\n");
 395 spi_transport_rd_attr(pcomp_en, "%d\n");
 396 spi_transport_rd_attr(hold_mcs, "%d\n");
 397
 398 /* we only care about the first child device that's a real SCSI device
 399  * so we return 1 to terminate the iteration when we find it */
 400 static int child_iter(struct device *dev, void *data)
 401 {
 402         if (!scsi_is_sdev_device(dev))
 403                 return 0;
 404
 405         spi_dv_device(to_scsi_device(dev));
 406         return 1;
 407 }
 408
 409 static ssize_t
 410 store_spi_revalidate(struct device *dev, struct device_attribute *attr,
 411                      const char *buf, size_t count)
 412 {
 413         struct scsi_target *starget = transport_class_to_starget(dev);
 414
 415         device_for_each_child(&starget->dev, NULL, child_iter);
 416         return count;
 417 }
 418 static DEVICE_ATTR(revalidate, S_IWUSR, NULL, store_spi_revalidate);
 419
 420 /* Translate the period into ns according to the current spec
 421  * for SDTR/PPR messages */
 422 static int period_to_str(char *buf, int period)
 423 {
 424         int len, picosec;
 425
 426         if (period < 0 || period > 0xff) {
 427                 picosec = -1;
 428         } else if (period <= SPI_STATIC_PPR) {
 429                 picosec = ppr_to_ps[period];
 430         } else {
 431                 picosec = period * 4000;
 432         }
 433
 434         if (picosec == -1) {
 435                 len = sprintf(buf, "reserved");
 436         } else {
 437                 len = sprint_frac(buf, picosec, 1000);
 438         }
 439
 440         return len;
 441 }
 442
 443 static ssize_t
 444 show_spi_transport_period_helper(char *buf, int period)
 445 {
 446         int len = period_to_str(buf, period);
 447         buf[len++] = '\n';
 448         buf[len] = '\0';
 449         return len;
 450 }
 451
 452 static ssize_t
 453 store_spi_transport_period_helper(struct device *dev, const char *buf,
 454                                   size_t count, int *periodp)
 455 {
 456         int j, picosec, period = -1;
 457         char *endp;
 458
 459         picosec = simple_strtoul(buf, &endp, 10) * 1000;
 460         if (*endp == '.') {
 461                 int mult = 100;
 462                 do {
 463                         endp++;
 464                         if (!isdigit(*endp))
 465                                 break;
 466                         picosec += (*endp - '0') * mult;
 467                         mult /= 10;
 468                 } while (mult > 0);
 469         }
 470
 471         for (j = 0; j <= SPI_STATIC_PPR; j++) {
 472                 if (ppr_to_ps[j] < picosec)
 473                         continue;
 474                 period = j;
 475                 break;
 476         }
 477
 478         if (period == -1)
 479                 period = picosec / 4000;
 480
 481         if (period > 0xff)
 482                 period = 0xff;
 483
 484         *periodp = period;
 485
 486         return count;
 487 }
 488
 489 static ssize_t
 490 show_spi_transport_period(struct device *dev,
 491                           struct device_attribute *attr, char *buf)
 492 {
 493         struct scsi_target *starget = transport_class_to_starget(dev);
 494         struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
 495         struct spi_internal *i = to_spi_internal(shost->transportt);
 496         struct spi_transport_attrs *tp =
 497                 (struct spi_transport_attrs *)&starget->starget_data;
 498
 499         if (i->f->get_period)
 500                 i->f->get_period(starget);
 501
 502         return show_spi_transport_period_helper(buf, tp->period);
 503 }
 504
 505 static ssize_t
 506 store_spi_transport_period(struct device *cdev, struct device_attribute *attr,
 507                            const char *buf, size_t count)
 508 {
 509         struct scsi_target *starget = transport_class_to_starget(cdev);
 510         struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
 511         struct spi_internal *i = to_spi_internal(shost->transportt);
 512         struct spi_transport_attrs *tp =
 513                 (struct spi_transport_attrs *)&starget->starget_data;
 514         int period, retval;
 515
 516         if (!i->f->set_period)
 517                 return -EINVAL;
 518
 519         retval = store_spi_transport_period_helper(cdev, buf, count, &period);
 520
 521         if (period < tp->min_period)
 522                 period = tp->min_period;
 523
 524         i->f->set_period(starget, period);
 525
 526         return retval;
 527 }
 528
 529 static DEVICE_ATTR(period, S_IRUGO,
 530                    show_spi_transport_period,
 531                    store_spi_transport_period);
 532
 533 static ssize_t
 534 show_spi_transport_min_period(struct device *cdev,
 535                               struct device_attribute *attr, char *buf)
 536 {
 537         struct scsi_target *starget = transport_class_to_starget(cdev);
 538         struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
 539         struct spi_internal *i = to_spi_internal(shost->transportt);
 540         struct spi_transport_attrs *tp =
 541                 (struct spi_transport_attrs *)&starget->starget_data;
 542
 543         if (!i->f->set_period)
 544                 return -EINVAL;
 545
 546         return show_spi_transport_period_helper(buf, tp->min_period);
 547 }
 548
 549 static ssize_t
 550 store_spi_transport_min_period(struct device *cdev,
 551                                struct device_attribute *attr,
 552                                const char *buf, size_t count)
 553 {
 554         struct scsi_target *starget = transport_class_to_starget(cdev);
 555         struct spi_transport_attrs *tp =
 556                 (struct spi_transport_attrs *)&starget->starget_data;
 557
 558         return store_spi_transport_period_helper(cdev, buf, count,
 559                                                  &tp->min_period);
 560 }
 561
 562
 563 static DEVICE_ATTR(min_period, S_IRUGO,
 564                    show_spi_transport_min_period,
 565                    store_spi_transport_min_period);
 566
 567
 568 static ssize_t show_spi_host_signalling(struct device *cdev,
 569                                         struct device_attribute *attr,
 570                                         char *buf)
 571 {
 572         struct Scsi_Host *shost = transport_class_to_shost(cdev);
 573         struct spi_internal *i = to_spi_internal(shost->transportt);
 574
 575         if (i->f->get_signalling)
 576                 i->f->get_signalling(shost);
 577
 578         return sprintf(buf, "%s\n", spi_signal_to_string(spi_signalling(shost)));
 579 }
 580 static ssize_t store_spi_host_signalling(struct device *dev,
 581                                          struct device_attribute *attr,
 582                                          const char *buf, size_t count)
 583 {
 584         struct Scsi_Host *shost = transport_class_to_shost(dev);
 585         struct spi_internal *i = to_spi_internal(shost->transportt);
 586         enum spi_signal_type type = spi_signal_to_value(buf);
 587
 588         if (!i->f->set_signalling)
 589                 return -EINVAL;
 590
 591         if (type != SPI_SIGNAL_UNKNOWN)
 592                 i->f->set_signalling(shost, type);
 593
 594         return count;
 595 }
 596 static DEVICE_ATTR(signalling, S_IRUGO,
 597                    show_spi_host_signalling,
 598                    store_spi_host_signalling);
 599
 600 #define DV_SET(x, y)                    \
 601         if(i->f->set_##x)               \
 602                 i->f->set_##x(sdev->sdev_target, y)
 603
 604 enum spi_compare_returns {
 605         SPI_COMPARE_SUCCESS,
 606         SPI_COMPARE_FAILURE,
 607         SPI_COMPARE_SKIP_TEST,
 608 };
 609
 610
 611 /* This is for read/write Domain Validation:  If the device supports
 612  * an echo buffer, we do read/write tests to it */
 613 static enum spi_compare_returns
 614 spi_dv_device_echo_buffer(struct scsi_device *sdev, u8 *buffer,
 615                           u8 *ptr, const int retries)
 616 {
 617         int len = ptr - buffer;
 618         int j, k, r, result;
 619         unsigned int pattern = 0x0000ffff;
 620         struct scsi_sense_hdr sshdr;
 621
 622         const char spi_write_buffer[] = {
 623                 WRITE_BUFFER, 0x0a, 0, 0, 0, 0, 0, len >> 8, len & 0xff, 0
 624         };
 625         const char spi_read_buffer[] = {
 626                 READ_BUFFER, 0x0a, 0, 0, 0, 0, 0, len >> 8, len & 0xff, 0
 627         };
 628
 629         /* set up the pattern buffer.  Doesn't matter if we spill
 630          * slightly beyond since that's where the read buffer is */
 631         for (j = 0; j < len; ) {
 632
 633                 /* fill the buffer with counting (test a) */
 634                 for ( ; j < min(len, 32); j++)
 635                         buffer[j] = j;
 636                 k = j;
 637                 /* fill the buffer with alternating words of 0x0 and
 638                  * 0xffff (test b) */
 639                 for ( ; j < min(len, k + 32); j += 2) {
 640                         u16 *word = (u16 *)&buffer[j];
 641
 642                         *word = (j & 0x02) ? 0x0000 : 0xffff;
 643                 }
 644                 k = j;
 645                 /* fill with crosstalk (alternating 0x5555 0xaaa)
 646                  * (test c) */
 647                 for ( ; j < min(len, k + 32); j += 2) {
 648                         u16 *word = (u16 *)&buffer[j];
 649
 650                         *word = (j & 0x02) ? 0x5555 : 0xaaaa;
 651                 }
 652                 k = j;
 653                 /* fill with shifting bits (test d) */
 654                 for ( ; j < min(len, k + 32); j += 4) {
 655                         u32 *word = (unsigned int *)&buffer[j];
 656                         u32 roll = (pattern & 0x80000000) ? 1 : 0;
 657
 658                         *word = pattern;
 659                         pattern = (pattern << 1) | roll;
 660                 }
 661                 /* don't bother with random data (test e) */
 662         }
 663
 664         for (r = 0; r < retries; r++) {
 665                 result = spi_execute(sdev, spi_write_buffer, DMA_TO_DEVICE,
 666                                      buffer, len, &sshdr);
 667                 if(result || !scsi_device_online(sdev)) {
 668
 669                         scsi_device_set_state(sdev, SDEV_QUIESCE);
 670                         if (scsi_sense_valid(&sshdr)
 671                             && sshdr.sense_key == ILLEGAL_REQUEST
 672                             /* INVALID FIELD IN CDB */
 673                             && sshdr.asc == 0x24 && sshdr.ascq == 0x00)
 674                                 /* This would mean that the drive lied
 675                                  * to us about supporting an echo
 676                                  * buffer (unfortunately some Western
 677                                  * Digital drives do precisely this)
 678                                  */
 679                                 return SPI_COMPARE_SKIP_TEST;
 680
 681
 682                         sdev_printk(KERN_ERR, sdev, "Write Buffer failure %x\n", result);
 683                         return SPI_COMPARE_FAILURE;
 684                 }
 685
 686                 memset(ptr, 0, len);
 687                 spi_execute(sdev, spi_read_buffer, DMA_FROM_DEVICE,
 688                             ptr, len, NULL);
 689                 scsi_device_set_state(sdev, SDEV_QUIESCE);
 690
 691                 if (memcmp(buffer, ptr, len) != 0)
 692                         return SPI_COMPARE_FAILURE;
 693         }
 694         return SPI_COMPARE_SUCCESS;
 695 }
 696
 697 /* This is for the simplest form of Domain Validation: a read test
 698  * on the inquiry data from the device */
 699 static enum spi_compare_returns
 700 spi_dv_device_compare_inquiry(struct scsi_device *sdev, u8 *buffer,
 701                               u8 *ptr, const int retries)
 702 {
 703         int r, result;
 704         const int len = sdev->inquiry_len;
 705         const char spi_inquiry[] = {
 706                 INQUIRY, 0, 0, 0, len, 0
 707         };
 708
 709         for (r = 0; r < retries; r++) {
 710                 memset(ptr, 0, len);
 711
 712                 result = spi_execute(sdev, spi_inquiry, DMA_FROM_DEVICE,
 713                                      ptr, len, NULL);
 714
 715                 if(result || !scsi_device_online(sdev)) {
 716                         scsi_device_set_state(sdev, SDEV_QUIESCE);
 717                         return SPI_COMPARE_FAILURE;
 718                 }
 719
 720                 /* If we don't have the inquiry data already, the
 721                  * first read gets it */
 722                 if (ptr == buffer) {
 723                         ptr += len;
 724                         --r;
 725                         continue;
 726                 }
 727
 728                 if (memcmp(buffer, ptr, len) != 0)
 729                         /* failure */
 730                         return SPI_COMPARE_FAILURE;
 731         }
 732         return SPI_COMPARE_SUCCESS;
 733 }
 734
 735 static enum spi_compare_returns
 736 spi_dv_retrain(struct scsi_device *sdev, u8 *buffer, u8 *ptr,
 737                enum spi_compare_returns
 738                (*compare_fn)(struct scsi_device *, u8 *, u8 *, int))
 739 {
 740         struct spi_internal *i = to_spi_internal(sdev->host->transportt);
 741         struct scsi_target *starget = sdev->sdev_target;
 742         int period = 0, prevperiod = 0;
 743         enum spi_compare_returns retval;
 744
 745
 746         for (;;) {
 747                 int newperiod;
 748                 retval = compare_fn(sdev, buffer, ptr, DV_LOOPS);
 749
 750                 if (retval == SPI_COMPARE_SUCCESS
 751                     || retval == SPI_COMPARE_SKIP_TEST)
 752                         break;
 753
 754                 /* OK, retrain, fallback */
 755                 if (i->f->get_iu)
 756                         i->f->get_iu(starget);
 757                 if (i->f->get_qas)
 758                         i->f->get_qas(starget);
 759                 if (i->f->get_period)
 760                         i->f->get_period(sdev->sdev_target);
 761
 762                 /* Here's the fallback sequence; first try turning off
 763                  * IU, then QAS (if we can control them), then finally
 764                  * fall down the periods */
 765                 if (i->f->set_iu && spi_iu(starget)) {
 766                         starget_printk(KERN_ERR, starget, "Domain Validation Disabing Information Units\n");
 767                         DV_SET(iu, 0);
 768                 } else if (i->f->set_qas && spi_qas(starget)) {
 769                         starget_printk(KERN_ERR, starget, "Domain Validation Disabing Quick Arbitration and Selection\n");
 770                         DV_SET(qas, 0);
 771                 } else {
 772                         newperiod = spi_period(starget);
 773                         period = newperiod > period ? newperiod : period;
 774                         if (period < 0x0d)
 775                                 period++;
 776                         else
 777                                 period += period >> 1;
 778
 779                         if (unlikely(period > 0xff || period == prevperiod)) {
 780                                 /* Total failure; set to async and return */
 781                                 starget_printk(KERN_ERR, starget, "Domain Validation Failure, dropping back to Asynchronous\n");
 782                                 DV_SET(offset, 0);
 783                                 return SPI_COMPARE_FAILURE;
 784                         }
 785                         starget_printk(KERN_ERR, starget, "Domain Validation detected failure, dropping back\n");
 786                         DV_SET(period, period);
 787                         prevperiod = period;
 788                 }
 789         }
 790         return retval;
 791 }
 792
 793 static int
 794 spi_dv_device_get_echo_buffer(struct scsi_device *sdev, u8 *buffer)
 795 {
 796         int l, result;
 797
 798         /* first off do a test unit ready.  This can error out
 799          * because of reservations or some other reason.  If it
 800          * fails, the device won't let us write to the echo buffer
 801          * so just return failure */
 802
 803         const char spi_test_unit_ready[] = {
 804                 TEST_UNIT_READY, 0, 0, 0, 0, 0
 805         };
 806
 807         const char spi_read_buffer_descriptor[] = {
 808                 READ_BUFFER, 0x0b, 0, 0, 0, 0, 0, 0, 4, 0
 809         };
 810
 811
 812         /* We send a set of three TURs to clear any outstanding
 813          * unit attention conditions if they exist (Otherwise the
 814          * buffer tests won't be happy).  If the TUR still fails
 815          * (reservation conflict, device not ready, etc) just
 816          * skip the write tests */
 817         for (l = 0; ; l++) {
 818                 result = spi_execute(sdev, spi_test_unit_ready, DMA_NONE,
 819                                      NULL, 0, NULL);
 820
 821                 if(result) {
 822                         if(l >= 3)
 823                                 return 0;
 824                 } else {
 825                         /* TUR succeeded */
 826                         break;
 827                 }
 828         }
 829
 830         result = spi_execute(sdev, spi_read_buffer_descriptor,
 831                              DMA_FROM_DEVICE, buffer, 4, NULL);
 832
 833         if (result)
 834                 /* Device has no echo buffer */
 835                 return 0;
 836
 837         return buffer[3] + ((buffer[2] & 0x1f) << 8);
 838 }
 839
 840 static void
 841 spi_dv_device_internal(struct scsi_device *sdev, u8 *buffer)
 842 {
 843         struct spi_internal *i = to_spi_internal(sdev->host->transportt);
 844         struct scsi_target *starget = sdev->sdev_target;
 845         struct Scsi_Host *shost = sdev->host;
 846         int len = sdev->inquiry_len;
 847         int min_period = spi_min_period(starget);
 848         int max_width = spi_max_width(starget);
 849         /* first set us up for narrow async */
 850         DV_SET(offset, 0);
 851         DV_SET(width, 0);
 852
 853         if (spi_dv_device_compare_inquiry(sdev, buffer, buffer, DV_LOOPS)
 854             != SPI_COMPARE_SUCCESS) {
 855                 starget_printk(KERN_ERR, starget, "Domain Validation Initial Inquiry Failed\n");
 856                 /* FIXME: should probably offline the device here? */
 857                 return;
 858         }
 859
 860         if (!spi_support_wide(starget)) {
 861                 spi_max_width(starget) = 0;
 862                 max_width = 0;
 863         }
 864
 865         /* test width */
 866         if (i->f->set_width && max_width) {
 867                 i->f->set_width(starget, 1);
 868
 869                 if (spi_dv_device_compare_inquiry(sdev, buffer,
 870                                                    buffer + len,
 871                                                    DV_LOOPS)
 872                     != SPI_COMPARE_SUCCESS) {
 873                         starget_printk(KERN_ERR, starget, "Wide Transfers Fail\n");
 874                         i->f->set_width(starget, 0);
 875                         /* Make sure we don't force wide back on by asking
 876                          * for a transfer period that requires it */
 877                         max_width = 0;
 878                         if (min_period < 10)
 879                                 min_period = 10;
 880                 }
 881         }
 882
 883         if (!i->f->set_period)
 884                 return;
 885
 886         /* device can't handle synchronous */
 887         if (!spi_support_sync(starget) && !spi_support_dt(starget))
 888                 return;
 889
 890         /* len == -1 is the signal that we need to ascertain the
 891          * presence of an echo buffer before trying to use it.  len ==
 892          * 0 means we don't have an echo buffer */
 893         len = -1;
 894
 895  retry:
 896
 897         /* now set up to the maximum */
 898         DV_SET(offset, spi_max_offset(starget));
 899         DV_SET(period, min_period);
 900
 901         /* try QAS requests; this should be harmless to set if the
 902          * target supports it */
 903         if (spi_support_qas(starget) && spi_max_qas(starget)) {
 904                 DV_SET(qas, 1);
 905         } else {
 906                 DV_SET(qas, 0);
 907         }
 908
 909         if (spi_support_ius(starget) && spi_max_iu(starget) &&
 910             min_period < 9) {
 911                 /* This u320 (or u640). Set IU transfers */
 912                 DV_SET(iu, 1);
 913                 /* Then set the optional parameters */
 914                 DV_SET(rd_strm, 1);
 915                 DV_SET(wr_flow, 1);
 916                 DV_SET(rti, 1);
 917                 if (min_period == 8)
 918                         DV_SET(pcomp_en, 1);
 919         } else {
 920                 DV_SET(iu, 0);
 921         }
 922
 923         /* now that we've done all this, actually check the bus
 924          * signal type (if known).  Some devices are stupid on
 925          * a SE bus and still claim they can try LVD only settings */
 926         if (i->f->get_signalling)
 927                 i->f->get_signalling(shost);
 928         if (spi_signalling(shost) == SPI_SIGNAL_SE ||
 929             spi_signalling(shost) == SPI_SIGNAL_HVD ||
 930             !spi_support_dt(starget)) {
 931                 DV_SET(dt, 0);
 932         } else {
 933                 DV_SET(dt, 1);
 934         }
 935         /* set width last because it will pull all the other
 936          * parameters down to required values */
 937         DV_SET(width, max_width);
 938
 939         /* Do the read only INQUIRY tests */
 940         spi_dv_retrain(sdev, buffer, buffer + sdev->inquiry_len,
 941                        spi_dv_device_compare_inquiry);
 942         /* See if we actually managed to negotiate and sustain DT */
 943         if (i->f->get_dt)
 944                 i->f->get_dt(starget);
 945
 946         /* see if the device has an echo buffer.  If it does we can do
 947          * the SPI pattern write tests.  Because of some broken
 948          * devices, we *only* try this on a device that has actually
 949          * negotiated DT */
 950
 951         if (len == -1 && spi_dt(starget))
 952                 len = spi_dv_device_get_echo_buffer(sdev, buffer);
 953
 954         if (len <= 0) {
 955                 starget_printk(KERN_INFO, starget, "Domain Validation skipping write tests\n");
 956                 return;
 957         }
 958
 959         if (len > SPI_MAX_ECHO_BUFFER_SIZE) {
 960                 starget_printk(KERN_WARNING, starget, "Echo buffer size %d is too big, trimming to %d\n", len, SPI_MAX_ECHO_BUFFER_SIZE);
 961                 len = SPI_MAX_ECHO_BUFFER_SIZE;
 962         }
 963
 964         if (spi_dv_retrain(sdev, buffer, buffer + len,
 965                            spi_dv_device_echo_buffer)
 966             == SPI_COMPARE_SKIP_TEST) {
 967                 /* OK, the stupid drive can't do a write echo buffer
 968                  * test after all, fall back to the read tests */
 969                 len = 0;
 970                 goto retry;
 971         }
 972 }
 973
 974
 975 /**     spi_dv_device - Do Domain Validation on the device
 976  *      @sdev:          scsi device to validate
 977  *
 978  *      Performs the domain validation on the given device in the
 979  *      current execution thread.  Since DV operations may sleep,
 980  *      the current thread must have user context.  Also no SCSI
 981  *      related locks that would deadlock I/O issued by the DV may
 982  *      be held.
 983  */
 984 void
 985 spi_dv_device(struct scsi_device *sdev)
 986 {
 987         struct scsi_target *starget = sdev->sdev_target;
 988         u8 *buffer;
 989         const int len = SPI_MAX_ECHO_BUFFER_SIZE*2;
 990
 991         if (unlikely(scsi_device_get(sdev)))
 992                 return;
 993
 994         if (unlikely(spi_dv_in_progress(starget)))
 995                 return;
 996         spi_dv_in_progress(starget) = 1;
 997
 998         buffer = kzalloc(len, GFP_KERNEL);
 999
1000         if (unlikely(!buffer))
1001                 goto out_put;
1002
1003         /* We need to verify that the actual device will quiesce; the
1004          * later target quiesce is just a nice to have */
1005         if (unlikely(scsi_device_quiesce(sdev)))
1006                 goto out_free;
1007
1008         scsi_target_quiesce(starget);
1009
1010         spi_dv_pending(starget) = 1;
1011         mutex_lock(&spi_dv_mutex(starget));
1012
1013         starget_printk(KERN_INFO, starget, "Beginning Domain Validation\n");
1014
1015         spi_dv_device_internal(sdev, buffer);
1016
1017         starget_printk(KERN_INFO, starget, "Ending Domain Validation\n");
1018
1019         mutex_unlock(&spi_dv_mutex(starget));
1020         spi_dv_pending(starget) = 0;
1021
1022         scsi_target_resume(starget);
1023
1024         spi_initial_dv(starget) = 1;
1025
1026  out_free:
1027         kfree(buffer);
1028  out_put:
1029         spi_dv_in_progress(starget) = 0;
1030         scsi_device_put(sdev);
1031 }
1032 EXPORT_SYMBOL(spi_dv_device);
1033
1034 struct work_queue_wrapper {
1035         struct work_struct      work;
1036         struct scsi_device      *sdev;
1037 };
1038
1039 static void
1040 spi_dv_device_work_wrapper(struct work_struct *work)
1041 {
1042         struct work_queue_wrapper *wqw =
1043                 container_of(work, struct work_queue_wrapper, work);
1044         struct scsi_device *sdev = wqw->sdev;
1045
1046         kfree(wqw);
1047         spi_dv_device(sdev);
1048         spi_dv_pending(sdev->sdev_target) = 0;
1049         scsi_device_put(sdev);
1050 }
1051
1052
1053 /**
1054  *      spi_schedule_dv_device - schedule domain validation to occur on the device
1055  *      @sdev:  The device to validate
1056  *
1057  *      Identical to spi_dv_device() above, except that the DV will be
1058  *      scheduled to occur in a workqueue later.  All memory allocations
1059  *      are atomic, so may be called from any context including those holding
1060  *      SCSI locks.
1061  */
1062 void
1063 spi_schedule_dv_device(struct scsi_device *sdev)
1064 {
1065         struct work_queue_wrapper *wqw =
1066                 kmalloc(sizeof(struct work_queue_wrapper), GFP_ATOMIC);
1067
1068         if (unlikely(!wqw))
1069                 return;
1070
1071         if (unlikely(spi_dv_pending(sdev->sdev_target))) {
1072                 kfree(wqw);
1073                 return;
1074         }
1075         /* Set pending early (dv_device doesn't check it, only sets it) */
1076         spi_dv_pending(sdev->sdev_target) = 1;
1077         if (unlikely(scsi_device_get(sdev))) {
1078                 kfree(wqw);
1079                 spi_dv_pending(sdev->sdev_target) = 0;
1080                 return;
1081         }
1082
1083         INIT_WORK(&wqw->work, spi_dv_device_work_wrapper);
1084         wqw->sdev = sdev;
1085
1086         schedule_work(&wqw->work);
1087 }
1088 EXPORT_SYMBOL(spi_schedule_dv_device);
1089
1090 /**
1091  * spi_display_xfer_agreement - Print the current target transfer agreement
1092  * @starget: The target for which to display the agreement
1093  *
1094  * Each SPI port is required to maintain a transfer agreement for each
1095  * other port on the bus.  This function prints a one-line summary of
1096  * the current agreement; more detailed information is available in sysfs.
1097  */
1098 void spi_display_xfer_agreement(struct scsi_target *starget)
1099 {
1100         struct spi_transport_attrs *tp;
1101         tp = (struct spi_transport_attrs *)&starget->starget_data;
1102
1103         if (tp->offset > 0 && tp->period > 0) {
1104                 unsigned int picosec, kb100;
1105                 char *scsi = "FAST-?";
1106                 char tmp[8];
1107
1108                 if (tp->period <= SPI_STATIC_PPR) {
1109                         picosec = ppr_to_ps[tp->period];
1110                         switch (tp->period) {
1111                                 case  7: scsi = "FAST-320"; break;
1112                                 case  8: scsi = "FAST-160"; break;
1113                                 case  9: scsi = "FAST-80"; break;
1114                                 case 10:
1115                                 case 11: scsi = "FAST-40"; break;
1116                                 case 12: scsi = "FAST-20"; break;
1117                         }
1118                 } else {
1119                         picosec = tp->period * 4000;
1120                         if (tp->period < 25)
1121                                 scsi = "FAST-20";
1122                         else if (tp->period < 50)
1123                                 scsi = "FAST-10";
1124                         else
1125                                 scsi = "FAST-5";
1126                 }
1127
1128                 kb100 = (10000000 + picosec / 2) / picosec;
1129                 if (tp->width)
1130                         kb100 *= 2;
1131                 sprint_frac(tmp, picosec, 1000);
1132
1133                 dev_info(&starget->dev,
1134                          "%s %sSCSI %d.%d MB/s %s%s%s%s%s%s%s%s (%s ns, offset %d)\n",
1135                          scsi, tp->width ? "WIDE " : "", kb100/10, kb100 % 10,
1136                          tp->dt ? "DT" : "ST",
1137                          tp->iu ? " IU" : "",
1138                          tp->qas  ? " QAS" : "",
1139                          tp->rd_strm ? " RDSTRM" : "",
1140                          tp->rti ? " RTI" : "",
1141                          tp->wr_flow ? " WRFLOW" : "",
1142                          tp->pcomp_en ? " PCOMP" : "",
1143                          tp->hold_mcs ? " HMCS" : "",
1144                          tmp, tp->offset);
1145         } else {
1146                 dev_info(&starget->dev, "%sasynchronous\n",
1147                                 tp->width ? "wide " : "");
1148         }
1149 }
1150 EXPORT_SYMBOL(spi_display_xfer_agreement);
1151
1152 int spi_populate_width_msg(unsigned char *msg, int width)
1153 {
1154         msg[0] = EXTENDED_MESSAGE;
1155         msg[1] = 2;
1156         msg[2] = EXTENDED_WDTR;
1157         msg[3] = width;
1158         return 4;
1159 }
1160 EXPORT_SYMBOL_GPL(spi_populate_width_msg);
1161
1162 int spi_populate_sync_msg(unsigned char *msg, int period, int offset)
1163 {
1164         msg[0] = EXTENDED_MESSAGE;
1165         msg[1] = 3;
1166         msg[2] = EXTENDED_SDTR;
1167         msg[3] = period;
1168         msg[4] = offset;
1169         return 5;
1170 }
1171 EXPORT_SYMBOL_GPL(spi_populate_sync_msg);
1172
1173 int spi_populate_ppr_msg(unsigned char *msg, int period, int offset,
1174                 int width, int options)
1175 {
1176         msg[0] = EXTENDED_MESSAGE;
1177         msg[1] = 6;
1178         msg[2] = EXTENDED_PPR;
1179         msg[3] = period;
1180         msg[4] = 0;
1181         msg[5] = offset;
1182         msg[6] = width;
1183         msg[7] = options;
1184         return 8;
1185 }
1186 EXPORT_SYMBOL_GPL(spi_populate_ppr_msg);
1187
1188 #ifdef CONFIG_SCSI_CONSTANTS
1189 static const char * const one_byte_msgs[] = {
1190 /* 0x00 */ "Task Complete", NULL /* Extended Message */, "Save Pointers",
1191 /* 0x03 */ "Restore Pointers", "Disconnect", "Initiator Error",
1192 /* 0x06 */ "Abort Task Set", "Message Reject", "Nop", "Message Parity Error",
1193 /* 0x0a */ "Linked Command Complete", "Linked Command Complete w/flag",
1194 /* 0x0c */ "Target Reset", "Abort Task", "Clear Task Set",
1195 /* 0x0f */ "Initiate Recovery", "Release Recovery",
1196 /* 0x11 */ "Terminate Process", "Continue Task", "Target Transfer Disable",
1197 /* 0x14 */ NULL, NULL, "Clear ACA", "LUN Reset"
1198 };
1199
1200 static const char * const two_byte_msgs[] = {
1201 /* 0x20 */ "Simple Queue Tag", "Head of Queue Tag", "Ordered Queue Tag",
1202 /* 0x23 */ "Ignore Wide Residue", "ACA"
1203 };
1204
1205 static const char * const extended_msgs[] = {
1206 /* 0x00 */ "Modify Data Pointer", "Synchronous Data Transfer Request",
1207 /* 0x02 */ "SCSI-I Extended Identify", "Wide Data Transfer Request",
1208 /* 0x04 */ "Parallel Protocol Request", "Modify Bidirectional Data Pointer"
1209 };
1210
1211 static void print_nego(const unsigned char *msg, int per, int off, int width)
1212 {
1213         if (per) {
1214                 char buf[20];
1215                 period_to_str(buf, msg[per]);
1216                 printk("period = %s ns ", buf);
1217         }
1218
1219         if (off)
1220                 printk("offset = %d ", msg[off]);
1221         if (width)
1222                 printk("width = %d ", 8 << msg[width]);
1223 }
1224
1225 static void print_ptr(const unsigned char *msg, int msb, const char *desc)
1226 {
1227         int ptr = (msg[msb] << 24) | (msg[msb+1] << 16) | (msg[msb+2] << 8) |
1228                         msg[msb+3];
1229         printk("%s = %d ", desc, ptr);
1230 }
1231
1232 int spi_print_msg(const unsigned char *msg)
1233 {
1234         int len = 1, i;
1235         if (msg[0] == EXTENDED_MESSAGE) {
1236                 len = 2 + msg[1];
1237                 if (len == 2)
1238                         len += 256;
1239                 if (msg[2] < ARRAY_SIZE(extended_msgs))
1240                         printk ("%s ", extended_msgs[msg[2]]);
1241                 else
1242                         printk ("Extended Message, reserved code (0x%02x) ",
1243                                 (int) msg[2]);
1244                 switch (msg[2]) {
1245                 case EXTENDED_MODIFY_DATA_POINTER:
1246                         print_ptr(msg, 3, "pointer");
1247                         break;
1248                 case EXTENDED_SDTR:
1249                         print_nego(msg, 3, 4, 0);
1250                         break;
1251                 case EXTENDED_WDTR:
1252                         print_nego(msg, 0, 0, 3);
1253                         break;
1254                 case EXTENDED_PPR:
1255                         print_nego(msg, 3, 5, 6);
1256                         break;
1257                 case EXTENDED_MODIFY_BIDI_DATA_PTR:
1258                         print_ptr(msg, 3, "out");
1259                         print_ptr(msg, 7, "in");
1260                         break;
1261                 default:
1262                 for (i = 2; i < len; ++i)
1263                         printk("%02x ", msg[i]);
1264                 }
1265         /* Identify */
1266         } else if (msg[0] & 0x80) {
1267                 printk("Identify disconnect %sallowed %s %d ",
1268                         (msg[0] & 0x40) ? "" : "not ",
1269                         (msg[0] & 0x20) ? "target routine" : "lun",
1270                         msg[0] & 0x7);
1271         /* Normal One byte */
1272         } else if (msg[0] < 0x1f) {
1273                 if (msg[0] < ARRAY_SIZE(one_byte_msgs) && one_byte_msgs[msg[0]])
1274                         printk("%s ", one_byte_msgs[msg[0]]);
1275                 else
1276                         printk("reserved (%02x) ", msg[0]);
1277         } else if (msg[0] == 0x55) {
1278                 printk("QAS Request ");
1279         /* Two byte */
1280         } else if (msg[0] <= 0x2f) {
1281                 if ((msg[0] - 0x20) < ARRAY_SIZE(two_byte_msgs))
1282                         printk("%s %02x ", two_byte_msgs[msg[0] - 0x20],
1283                                 msg[1]);
1284                 else
1285                         printk("reserved two byte (%02x %02x) ",
1286                                 msg[0], msg[1]);
1287                 len = 2;
1288         } else
1289                 printk("reserved ");
1290         return len;
1291 }
1292 EXPORT_SYMBOL(spi_print_msg);
1293
1294 #else  /* ifndef CONFIG_SCSI_CONSTANTS */
1295
1296 int spi_print_msg(const unsigned char *msg)
1297 {
1298         int len = 1, i;
1299
1300         if (msg[0] == EXTENDED_MESSAGE) {
1301                 len = 2 + msg[1];
1302                 if (len == 2)
1303                         len += 256;
1304                 for (i = 0; i < len; ++i)
1305                         printk("%02x ", msg[i]);
1306         /* Identify */
1307         } else if (msg[0] & 0x80) {
1308                 printk("%02x ", msg[0]);
1309         /* Normal One byte */
1310         } else if ((msg[0] < 0x1f) || (msg[0] == 0x55)) {
1311                 printk("%02x ", msg[0]);
1312         /* Two byte */
1313         } else if (msg[0] <= 0x2f) {
1314                 printk("%02x %02x", msg[0], msg[1]);
1315                 len = 2;
1316         } else
1317                 printk("%02x ", msg[0]);
1318         return len;
1319 }
1320 EXPORT_SYMBOL(spi_print_msg);
1321 #endif /* ! CONFIG_SCSI_CONSTANTS */
1322
1323 static int spi_device_match(struct attribute_container *cont,
1324                             struct device *dev)
1325 {
1326         struct scsi_device *sdev;
1327         struct Scsi_Host *shost;
1328         struct spi_internal *i;
1329
1330         if (!scsi_is_sdev_device(dev))
1331                 return 0;
1332
1333         sdev = to_scsi_device(dev);
1334         shost = sdev->host;
1335         if (!shost->transportt  || shost->transportt->host_attrs.ac.class
1336             != &spi_host_class.class)
1337                 return 0;
1338         /* Note: this class has no device attributes, so it has
1339          * no per-HBA allocation and thus we don't need to distinguish
1340          * the attribute containers for the device */
1341         i = to_spi_internal(shost->transportt);
1342         if (i->f->deny_binding && i->f->deny_binding(sdev->sdev_target))
1343                 return 0;
1344         return 1;
1345 }
1346
1347 static int spi_target_match(struct attribute_container *cont,
1348                             struct device *dev)
1349 {
1350         struct Scsi_Host *shost;
1351         struct scsi_target *starget;
1352         struct spi_internal *i;
1353
1354         if (!scsi_is_target_device(dev))
1355                 return 0;
1356
1357         shost = dev_to_shost(dev->parent);
1358         if (!shost->transportt  || shost->transportt->host_attrs.ac.class
1359             != &spi_host_class.class)
1360                 return 0;
1361
1362         i = to_spi_internal(shost->transportt);
1363         starget = to_scsi_target(dev);
1364
1365         if (i->f->deny_binding && i->f->deny_binding(starget))
1366                 return 0;
1367
1368         return &i->t.target_attrs.ac == cont;
1369 }
1370
1371 static DECLARE_TRANSPORT_CLASS(spi_transport_class,
1372                                "spi_transport",
1373                                spi_setup_transport_attrs,
1374                                NULL,
1375                                spi_target_configure);
1376
1377 static DECLARE_ANON_TRANSPORT_CLASS(spi_device_class,
1378                                     spi_device_match,
1379                                     spi_device_configure);
1380
1381 static struct attribute *host_attributes[] = {
1382         &dev_attr_signalling.attr,
1383         NULL
1384 };
1385
1386 static struct attribute_group host_attribute_group = {
1387         .attrs = host_attributes,
1388 };
1389
1390 static int spi_host_configure(struct transport_container *tc,
1391                               struct device *dev,
1392                               struct device *cdev)
1393 {
1394         struct kobject *kobj = &cdev->kobj;
1395         struct Scsi_Host *shost = transport_class_to_shost(cdev);
1396         struct spi_internal *si = to_spi_internal(shost->transportt);
1397         struct attribute *attr = &dev_attr_signalling.attr;
1398         int rc = 0;
1399
1400         if (si->f->set_signalling)
1401                 rc = sysfs_chmod_file(kobj, attr, attr->mode | S_IWUSR);
1402
1403         return rc;
1404 }
1405
1406 /* returns true if we should be showing the variable.  Also
1407  * overloads the return by setting 1<<1 if the attribute should
1408  * be writeable */
1409 #define TARGET_ATTRIBUTE_HELPER(name) \
1410         (si->f->show_##name ? S_IRUGO : 0) | \
1411         (si->f->set_##name ? S_IWUSR : 0)
1412
1413 static mode_t target_attribute_is_visible(struct kobject *kobj,
1414                                           struct attribute *attr, int i)
1415 {
1416         struct device *cdev = container_of(kobj, struct device, kobj);
1417         struct scsi_target *starget = transport_class_to_starget(cdev);
1418         struct Scsi_Host *shost = transport_class_to_shost(cdev);
1419         struct spi_internal *si = to_spi_internal(shost->transportt);
1420
1421         if (attr == &dev_attr_period.attr &&
1422             spi_support_sync(starget))
1423                 return TARGET_ATTRIBUTE_HELPER(period);
1424         else if (attr == &dev_attr_min_period.attr &&
1425                  spi_support_sync(starget))
1426                 return TARGET_ATTRIBUTE_HELPER(period);
1427         else if (attr == &dev_attr_offset.attr &&
1428                  spi_support_sync(starget))
1429                 return TARGET_ATTRIBUTE_HELPER(offset);
1430         else if (attr == &dev_attr_max_offset.attr &&
1431                  spi_support_sync(starget))
1432                 return TARGET_ATTRIBUTE_HELPER(offset);
1433         else if (attr == &dev_attr_width.attr &&
1434                  spi_support_wide(starget))
1435                 return TARGET_ATTRIBUTE_HELPER(width);
1436         else if (attr == &dev_attr_max_width.attr &&
1437                  spi_support_wide(starget))
1438                 return TARGET_ATTRIBUTE_HELPER(width);
1439         else if (attr == &dev_attr_iu.attr &&
1440                  spi_support_ius(starget))
1441                 return TARGET_ATTRIBUTE_HELPER(iu);
1442         else if (attr == &dev_attr_max_iu.attr &&
1443                  spi_support_ius(starget))
1444                 return TARGET_ATTRIBUTE_HELPER(iu);
1445         else if (attr == &dev_attr_dt.attr &&
1446                  spi_support_dt(starget))
1447                 return TARGET_ATTRIBUTE_HELPER(dt);
1448         else if (attr == &dev_attr_qas.attr &&
1449                  spi_support_qas(starget))
1450                 return TARGET_ATTRIBUTE_HELPER(qas);
1451         else if (attr == &dev_attr_max_qas.attr &&
1452                  spi_support_qas(starget))
1453                 return TARGET_ATTRIBUTE_HELPER(qas);
1454         else if (attr == &dev_attr_wr_flow.attr &&
1455                  spi_support_ius(starget))
1456                 return TARGET_ATTRIBUTE_HELPER(wr_flow);
1457         else if (attr == &dev_attr_rd_strm.attr &&
1458                  spi_support_ius(starget))
1459                 return TARGET_ATTRIBUTE_HELPER(rd_strm);
1460         else if (attr == &dev_attr_rti.attr &&
1461                  spi_support_ius(starget))
1462                 return TARGET_ATTRIBUTE_HELPER(rti);
1463         else if (attr == &dev_attr_pcomp_en.attr &&
1464                  spi_support_ius(starget))
1465                 return TARGET_ATTRIBUTE_HELPER(pcomp_en);
1466         else if (attr == &dev_attr_hold_mcs.attr &&
1467                  spi_support_ius(starget))
1468                 return TARGET_ATTRIBUTE_HELPER(hold_mcs);
1469         else if (attr == &dev_attr_revalidate.attr)
1470                 return S_IWUSR;
1471
1472         return 0;
1473 }
1474
1475 static struct attribute *target_attributes[] = {
1476         &dev_attr_period.attr,
1477         &dev_attr_min_period.attr,
1478         &dev_attr_offset.attr,
1479         &dev_attr_max_offset.attr,
1480         &dev_attr_width.attr,
1481         &dev_attr_max_width.attr,
1482         &dev_attr_iu.attr,
1483         &dev_attr_max_iu.attr,
1484         &dev_attr_dt.attr,
1485         &dev_attr_qas.attr,
1486         &dev_attr_max_qas.attr,
1487         &dev_attr_wr_flow.attr,
1488         &dev_attr_rd_strm.attr,
1489         &dev_attr_rti.attr,
1490         &dev_attr_pcomp_en.attr,
1491         &dev_attr_hold_mcs.attr,
1492         &dev_attr_revalidate.attr,
1493         NULL
1494 };
1495
1496 static struct attribute_group target_attribute_group = {
1497         .attrs = target_attributes,
1498         .is_visible = target_attribute_is_visible,
1499 };
1500
1501 static int spi_target_configure(struct transport_container *tc,
1502                                 struct device *dev,
1503                                 struct device *cdev)
1504 {
1505         struct kobject *kobj = &cdev->kobj;
1506
1507         /* force an update based on parameters read from the device */
1508         sysfs_update_group(kobj, &target_attribute_group);
1509
1510         return 0;
1511 }
1512
1513 struct scsi_transport_template *
1514 spi_attach_transport(struct spi_function_template *ft)
1515 {
1516         struct spi_internal *i = kzalloc(sizeof(struct spi_internal),
1517                                          GFP_KERNEL);
1518
1519         if (unlikely(!i))
1520                 return NULL;
1521
1522         i->t.target_attrs.ac.class = &spi_transport_class.class;
1523         i->t.target_attrs.ac.grp = &target_attribute_group;
1524         i->t.target_attrs.ac.match = spi_target_match;
1525         transport_container_register(&i->t.target_attrs);
1526         i->t.target_size = sizeof(struct spi_transport_attrs);
1527         i->t.host_attrs.ac.class = &spi_host_class.class;
1528         i->t.host_attrs.ac.grp = &host_attribute_group;
1529         i->t.host_attrs.ac.match = spi_host_match;
1530         transport_container_register(&i->t.host_attrs);
1531         i->t.host_size = sizeof(struct spi_host_attrs);
1532         i->f = ft;
1533
1534         return &i->t;
1535 }
1536 EXPORT_SYMBOL(spi_attach_transport);
1537
1538 void spi_release_transport(struct scsi_transport_template *t)
1539 {
1540         struct spi_internal *i = to_spi_internal(t);
1541
1542         transport_container_unregister(&i->t.target_attrs);
1543         transport_container_unregister(&i->t.host_attrs);
1544
1545         kfree(i);
1546 }
1547 EXPORT_SYMBOL(spi_release_transport);
1548
1549 static __init int spi_transport_init(void)
1550 {
1551         int error = scsi_dev_info_add_list(SCSI_DEVINFO_SPI,
1552                                            "SCSI Parallel Transport Class");
1553         if (!error) {
1554                 int i;
1555
1556                 for (i = 0; spi_static_device_list[i].vendor; i++)
1557                         scsi_dev_info_list_add_keyed(1, /* compatible */
1558                                                      spi_static_device_list[i].vendor,
1559                                                      spi_static_device_list[i].model,
1560                                                      NULL,
1561                                                      spi_static_device_list[i].flags,
1562                                                      SCSI_DEVINFO_SPI);
1563         }
1564
1565         error = transport_class_register(&spi_transport_class);
1566         if (error)
1567                 return error;
1568         error = anon_transport_class_register(&spi_device_class);
1569         return transport_class_register(&spi_host_class);
1570 }
1571
1572 static void __exit spi_transport_exit(void)
1573 {
1574         transport_class_unregister(&spi_transport_class);
1575         anon_transport_class_unregister(&spi_device_class);
1576         transport_class_unregister(&spi_host_class);
1577         scsi_dev_info_remove_list(SCSI_DEVINFO_SPI);
1578 }
1579
1580 MODULE_AUTHOR("Martin Hicks");
1581 MODULE_DESCRIPTION("SPI Transport Attributes");
1582 MODULE_LICENSE("GPL");
1583
1584 module_init(spi_transport_init);
1585 module_exit(spi_transport_exit);