drivers/scsi/aacraid/src.c

   1 /*
   2  *      Adaptec AAC series RAID controller driver
   3  *      (c) Copyright 2001 Red Hat Inc.
   4  *
   5  * based on the old aacraid driver that is..
   6  * Adaptec aacraid device driver for Linux.
   7  *
   8  * Copyright (c) 2000-2010 Adaptec, Inc.
   9  *               2010 PMC-Sierra, Inc. (aacraid@pmc-sierra.com)
  10  *
  11  * This program is free software; you can redistribute it and/or modify
  12  * it under the terms of the GNU General Public License as published by
  13  * the Free Software Foundation; either version 2, or (at your option)
  14  * any later version.
  15  *
  16  * This program is distributed in the hope that it will be useful,
  17  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  18  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  19  * GNU General Public License for more details.
  20  *
  21  * You should have received a copy of the GNU General Public License
  22  * along with this program; see the file COPYING.  If not, write to
  23  * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
  24  *
  25  * Module Name:
  26  *  src.c
  27  *
  28  * Abstract: Hardware Device Interface for PMC SRC based controllers
  29  *
  30  */
  31
  32 #include <linux/kernel.h>
  33 #include <linux/init.h>
  34 #include <linux/types.h>
  35 #include <linux/pci.h>
  36 #include <linux/spinlock.h>
  37 #include <linux/slab.h>
  38 #include <linux/blkdev.h>
  39 #include <linux/delay.h>
  40 #include <linux/completion.h>
  41 #include <linux/time.h>
  42 #include <linux/interrupt.h>
  43 #include <scsi/scsi_host.h>
  44
  45 #include "aacraid.h"
  46
  47 static irqreturn_t aac_src_intr_message(int irq, void *dev_id)
  48 {
  49         struct aac_dev *dev = dev_id;
  50         unsigned long bellbits, bellbits_shifted;
  51         int our_interrupt = 0;
  52         int isFastResponse;
  53         u32 index, handle;
  54
  55         bellbits = src_readl(dev, MUnit.ODR_R);
  56         if (bellbits & PmDoorBellResponseSent) {
  57                 bellbits = PmDoorBellResponseSent;
  58                 /* handle async. status */
  59                 our_interrupt = 1;
  60                 index = dev->host_rrq_idx;
  61                 if (dev->host_rrq[index] == 0) {
  62                         u32 old_index = index;
  63                         /* adjust index */
  64                         do {
  65                                 index++;
  66                                 if (index == dev->scsi_host_ptr->can_queue +
  67                                                         AAC_NUM_MGT_FIB)
  68                                         index = 0;
  69                                 if (dev->host_rrq[index] != 0)
  70                                         break;
  71                         } while (index != old_index);
  72                         dev->host_rrq_idx = index;
  73                 }
  74                 for (;;) {
  75                         isFastResponse = 0;
  76                         /* remove toggle bit (31) */
  77                         handle = (dev->host_rrq[index] & 0x7fffffff);
  78                         /* check fast response bit (30) */
  79                         if (handle & 0x40000000)
  80                                 isFastResponse = 1;
  81                         handle &= 0x0000ffff;
  82                         if (handle == 0)
  83                                 break;
  84
  85                         aac_intr_normal(dev, handle-1, 0, isFastResponse, NULL);
  86
  87                         dev->host_rrq[index++] = 0;
  88                         if (index == dev->scsi_host_ptr->can_queue +
  89                                                 AAC_NUM_MGT_FIB)
  90                                 index = 0;
  91                         dev->host_rrq_idx = index;
  92                 }
  93         } else {
  94                 bellbits_shifted = (bellbits >> SRC_ODR_SHIFT);
  95                 if (bellbits_shifted & DoorBellAifPending) {
  96                         our_interrupt = 1;
  97                         /* handle AIF */
  98                         aac_intr_normal(dev, 0, 2, 0, NULL);
  99                 }
 100         }
 101
 102         if (our_interrupt) {
 103                 src_writel(dev, MUnit.ODR_C, bellbits);
 104                 return IRQ_HANDLED;
 105         }
 106         return IRQ_NONE;
 107 }
 108
 109 /**
 110  *      aac_src_disable_interrupt       -       Disable interrupts
 111  *      @dev: Adapter
 112  */
 113
 114 static void aac_src_disable_interrupt(struct aac_dev *dev)
 115 {
 116         src_writel(dev, MUnit.OIMR, dev->OIMR = 0xffffffff);
 117 }
 118
 119 /**
 120  *      aac_src_enable_interrupt_message        -       Enable interrupts
 121  *      @dev: Adapter
 122  */
 123
 124 static void aac_src_enable_interrupt_message(struct aac_dev *dev)
 125 {
 126         src_writel(dev, MUnit.OIMR, dev->OIMR = 0xfffffff8);
 127 }
 128
 129 /**
 130  *      src_sync_cmd    -       send a command and wait
 131  *      @dev: Adapter
 132  *      @command: Command to execute
 133  *      @p1: first parameter
 134  *      @ret: adapter status
 135  *
 136  *      This routine will send a synchronous command to the adapter and wait
 137  *      for its completion.
 138  */
 139
 140 static int src_sync_cmd(struct aac_dev *dev, u32 command,
 141         u32 p1, u32 p2, u32 p3, u32 p4, u32 p5, u32 p6,
 142         u32 *status, u32 * r1, u32 * r2, u32 * r3, u32 * r4)
 143 {
 144         unsigned long start;
 145         int ok;
 146
 147         /*
 148          *      Write the command into Mailbox 0
 149          */
 150         writel(command, &dev->IndexRegs->Mailbox[0]);
 151         /*
 152          *      Write the parameters into Mailboxes 1 - 6
 153          */
 154         writel(p1, &dev->IndexRegs->Mailbox[1]);
 155         writel(p2, &dev->IndexRegs->Mailbox[2]);
 156         writel(p3, &dev->IndexRegs->Mailbox[3]);
 157         writel(p4, &dev->IndexRegs->Mailbox[4]);
 158
 159         /*
 160          *      Clear the synch command doorbell to start on a clean slate.
 161          */
 162         src_writel(dev, MUnit.ODR_C, OUTBOUNDDOORBELL_0 << SRC_ODR_SHIFT);
 163
 164         /*
 165          *      Disable doorbell interrupts
 166          */
 167         src_writel(dev, MUnit.OIMR, dev->OIMR = 0xffffffff);
 168
 169         /*
 170          *      Force the completion of the mask register write before issuing
 171          *      the interrupt.
 172          */
 173         src_readl(dev, MUnit.OIMR);
 174
 175         /*
 176          *      Signal that there is a new synch command
 177          */
 178         src_writel(dev, MUnit.IDR, INBOUNDDOORBELL_0 << SRC_IDR_SHIFT);
 179
 180         ok = 0;
 181         start = jiffies;
 182
 183         /*
 184          *      Wait up to 30 seconds
 185          */
 186         while (time_before(jiffies, start+30*HZ)) {
 187                 /* Delay 5 microseconds to let Mon960 get info. */
 188                 udelay(5);
 189
 190                 /* Mon960 will set doorbell0 bit
 191                  * when it has completed the command
 192                  */
 193                 if ((src_readl(dev, MUnit.ODR_R) >> SRC_ODR_SHIFT) & OUTBOUNDDOORBELL_0) {
 194                         /* Clear the doorbell */
 195                         src_writel(dev,
 196                                 MUnit.ODR_C,
 197                                 OUTBOUNDDOORBELL_0 << SRC_ODR_SHIFT);
 198                         ok = 1;
 199                         break;
 200                 }
 201
 202                  /* Yield the processor in case we are slow */
 203                 msleep(1);
 204         }
 205         if (unlikely(ok != 1)) {
 206                  /* Restore interrupt mask even though we timed out */
 207                 aac_adapter_enable_int(dev);
 208                 return -ETIMEDOUT;
 209         }
 210
 211          /* Pull the synch status from Mailbox 0 */
 212         if (status)
 213                 *status = readl(&dev->IndexRegs->Mailbox[0]);
 214         if (r1)
 215                 *r1 = readl(&dev->IndexRegs->Mailbox[1]);
 216         if (r2)
 217                 *r2 = readl(&dev->IndexRegs->Mailbox[2]);
 218         if (r3)
 219                 *r3 = readl(&dev->IndexRegs->Mailbox[3]);
 220         if (r4)
 221                 *r4 = readl(&dev->IndexRegs->Mailbox[4]);
 222
 223          /* Clear the synch command doorbell */
 224         src_writel(dev, MUnit.ODR_C, OUTBOUNDDOORBELL_0 << SRC_ODR_SHIFT);
 225
 226          /* Restore interrupt mask */
 227         aac_adapter_enable_int(dev);
 228         return 0;
 229
 230 }
 231
 232 /**
 233  *      aac_src_interrupt_adapter       -       interrupt adapter
 234  *      @dev: Adapter
 235  *
 236  *      Send an interrupt to the i960 and breakpoint it.
 237  */
 238
 239 static void aac_src_interrupt_adapter(struct aac_dev *dev)
 240 {
 241         src_sync_cmd(dev, BREAKPOINT_REQUEST,
 242                 0, 0, 0, 0, 0, 0,
 243                 NULL, NULL, NULL, NULL, NULL);
 244 }
 245
 246 /**
 247  *      aac_src_notify_adapter          -       send an event to the adapter
 248  *      @dev: Adapter
 249  *      @event: Event to send
 250  *
 251  *      Notify the i960 that something it probably cares about has
 252  *      happened.
 253  */
 254
 255 static void aac_src_notify_adapter(struct aac_dev *dev, u32 event)
 256 {
 257         switch (event) {
 258
 259         case AdapNormCmdQue:
 260                 src_writel(dev, MUnit.ODR_C,
 261                         INBOUNDDOORBELL_1 << SRC_ODR_SHIFT);
 262                 break;
 263         case HostNormRespNotFull:
 264                 src_writel(dev, MUnit.ODR_C,
 265                         INBOUNDDOORBELL_4 << SRC_ODR_SHIFT);
 266                 break;
 267         case AdapNormRespQue:
 268                 src_writel(dev, MUnit.ODR_C,
 269                         INBOUNDDOORBELL_2 << SRC_ODR_SHIFT);
 270                 break;
 271         case HostNormCmdNotFull:
 272                 src_writel(dev, MUnit.ODR_C,
 273                         INBOUNDDOORBELL_3 << SRC_ODR_SHIFT);
 274                 break;
 275         case FastIo:
 276                 src_writel(dev, MUnit.ODR_C,
 277                         INBOUNDDOORBELL_6 << SRC_ODR_SHIFT);
 278                 break;
 279         case AdapPrintfDone:
 280                 src_writel(dev, MUnit.ODR_C,
 281                         INBOUNDDOORBELL_5 << SRC_ODR_SHIFT);
 282                 break;
 283         default:
 284                 BUG();
 285                 break;
 286         }
 287 }
 288
 289 /**
 290  *      aac_src_start_adapter           -       activate adapter
 291  *      @dev:   Adapter
 292  *
 293  *      Start up processing on an i960 based AAC adapter
 294  */
 295
 296 static void aac_src_start_adapter(struct aac_dev *dev)
 297 {
 298         struct aac_init *init;
 299
 300         init = dev->init;
 301         init->HostElapsedSeconds = cpu_to_le32(get_seconds());
 302
 303         /* We can only use a 32 bit address here */
 304         src_sync_cmd(dev, INIT_STRUCT_BASE_ADDRESS, (u32)(ulong)dev->init_pa,
 305           0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL);
 306 }
 307
 308 /**
 309  *      aac_src_check_health
 310  *      @dev: device to check if healthy
 311  *
 312  *      Will attempt to determine if the specified adapter is alive and
 313  *      capable of handling requests, returning 0 if alive.
 314  */
 315 static int aac_src_check_health(struct aac_dev *dev)
 316 {
 317         u32 status = src_readl(dev, MUnit.OMR);
 318
 319         /*
 320          *      Check to see if the board failed any self tests.
 321          */
 322         if (unlikely(status & SELF_TEST_FAILED))
 323                 return -1;
 324
 325         /*
 326          *      Check to see if the board panic'd.
 327          */
 328         if (unlikely(status & KERNEL_PANIC))
 329                 return (status >> 16) & 0xFF;
 330         /*
 331          *      Wait for the adapter to be up and running.
 332          */
 333         if (unlikely(!(status & KERNEL_UP_AND_RUNNING)))
 334                 return -3;
 335         /*
 336          *      Everything is OK
 337          */
 338         return 0;
 339 }
 340
 341 /**
 342  *      aac_src_deliver_message
 343  *      @fib: fib to issue
 344  *
 345  *      Will send a fib, returning 0 if successful.
 346  */
 347 static int aac_src_deliver_message(struct fib *fib)
 348 {
 349         struct aac_dev *dev = fib->dev;
 350         struct aac_queue *q = &dev->queues->queue[AdapNormCmdQueue];
 351         unsigned long qflags;
 352         u32 fibsize;
 353         u64 address;
 354         struct aac_fib_xporthdr *pFibX;
 355
 356         spin_lock_irqsave(q->lock, qflags);
 357         q->numpending++;
 358         spin_unlock_irqrestore(q->lock, qflags);
 359
 360         /* Calculate the amount to the fibsize bits */
 361         fibsize = (sizeof(struct aac_fib_xporthdr) +
 362                 fib->hw_fib_va->header.Size + 127) / 128 - 1;
 363         if (fibsize > (ALIGN32 - 1))
 364                 fibsize = ALIGN32 - 1;
 365
 366     /* Fill XPORT header */
 367         pFibX = (struct aac_fib_xporthdr *)
 368                 ((unsigned char *)fib->hw_fib_va -
 369                 sizeof(struct aac_fib_xporthdr));
 370         pFibX->Handle = fib->hw_fib_va->header.SenderData + 1;
 371         pFibX->HostAddress = fib->hw_fib_pa;
 372         pFibX->Size = fib->hw_fib_va->header.Size;
 373         address = fib->hw_fib_pa - (u64)sizeof(struct aac_fib_xporthdr);
 374
 375         src_writel(dev, MUnit.IQ_H, (u32)(address >> 32));
 376         src_writel(dev, MUnit.IQ_L, (u32)(address & 0xffffffff) + fibsize);
 377         return 0;
 378 }
 379
 380 /**
 381  *      aac_src_ioremap
 382  *      @size: mapping resize request
 383  *
 384  */
 385 static int aac_src_ioremap(struct aac_dev *dev, u32 size)
 386 {
 387         if (!size) {
 388                 iounmap(dev->regs.src.bar0);
 389                 dev->regs.src.bar0 = NULL;
 390                 iounmap(dev->base);
 391                 dev->base = NULL;
 392                 return 0;
 393         }
 394         dev->regs.src.bar1 = ioremap(pci_resource_start(dev->pdev, 2),
 395                 AAC_MIN_SRC_BAR1_SIZE);
 396         dev->base = NULL;
 397         if (dev->regs.src.bar1 == NULL)
 398                 return -1;
 399         dev->base = dev->regs.src.bar0 = ioremap(dev->scsi_host_ptr->base,
 400                                 size);
 401         if (dev->base == NULL) {
 402                 iounmap(dev->regs.src.bar1);
 403                 dev->regs.src.bar1 = NULL;
 404                 return -1;
 405         }
 406         dev->IndexRegs = &((struct src_registers __iomem *)
 407                 dev->base)->IndexRegs;
 408         return 0;
 409 }
 410
 411 static int aac_src_restart_adapter(struct aac_dev *dev, int bled)
 412 {
 413         u32 var, reset_mask;
 414
 415         if (bled >= 0) {
 416                 if (bled)
 417                         printk(KERN_ERR "%s%d: adapter kernel panic'd %x.\n",
 418                                 dev->name, dev->id, bled);
 419                 bled = aac_adapter_sync_cmd(dev, IOP_RESET_ALWAYS,
 420                         0, 0, 0, 0, 0, 0, &var, &reset_mask, NULL, NULL, NULL);
 421                         if (bled || (var != 0x00000001))
 422                                 bled = -EINVAL;
 423                 if (dev->supplement_adapter_info.SupportedOptions2 &
 424                         AAC_OPTION_DOORBELL_RESET) {
 425                         src_writel(dev, MUnit.IDR, reset_mask);
 426                         msleep(5000); /* Delay 5 seconds */
 427                 }
 428         }
 429
 430         if (src_readl(dev, MUnit.OMR) & KERNEL_PANIC)
 431                 return -ENODEV;
 432
 433         if (startup_timeout < 300)
 434                 startup_timeout = 300;
 435
 436         return 0;
 437 }
 438
 439 /**
 440  *      aac_src_select_comm     -       Select communications method
 441  *      @dev: Adapter
 442  *      @comm: communications method
 443  */
 444 int aac_src_select_comm(struct aac_dev *dev, int comm)
 445 {
 446         switch (comm) {
 447         case AAC_COMM_MESSAGE:
 448                 dev->a_ops.adapter_enable_int = aac_src_enable_interrupt_message;
 449                 dev->a_ops.adapter_intr = aac_src_intr_message;
 450                 dev->a_ops.adapter_deliver = aac_src_deliver_message;
 451                 break;
 452         default:
 453                 return 1;
 454         }
 455         return 0;
 456 }
 457
 458 /**
 459  *  aac_src_init        -       initialize an Cardinal Frey Bar card
 460  *  @dev: device to configure
 461  *
 462  */
 463
 464 int aac_src_init(struct aac_dev *dev)
 465 {
 466         unsigned long start;
 467         unsigned long status;
 468         int restart = 0;
 469         int instance = dev->id;
 470         const char *name = dev->name;
 471
 472         dev->a_ops.adapter_ioremap = aac_src_ioremap;
 473         dev->a_ops.adapter_comm = aac_src_select_comm;
 474
 475         dev->base_size = AAC_MIN_SRC_BAR0_SIZE;
 476         if (aac_adapter_ioremap(dev, dev->base_size)) {
 477                 printk(KERN_WARNING "%s: unable to map adapter.\n", name);
 478                 goto error_iounmap;
 479         }
 480
 481         /* Failure to reset here is an option ... */
 482         dev->a_ops.adapter_sync_cmd = src_sync_cmd;
 483         dev->a_ops.adapter_enable_int = aac_src_disable_interrupt;
 484         if ((aac_reset_devices || reset_devices) &&
 485                 !aac_src_restart_adapter(dev, 0))
 486                 ++restart;
 487         /*
 488          *      Check to see if the board panic'd while booting.
 489          */
 490         status = src_readl(dev, MUnit.OMR);
 491         if (status & KERNEL_PANIC) {
 492                 if (aac_src_restart_adapter(dev, aac_src_check_health(dev)))
 493                         goto error_iounmap;
 494                 ++restart;
 495         }
 496         /*
 497          *      Check to see if the board failed any self tests.
 498          */
 499         status = src_readl(dev, MUnit.OMR);
 500         if (status & SELF_TEST_FAILED) {
 501                 printk(KERN_ERR "%s%d: adapter self-test failed.\n",
 502                         dev->name, instance);
 503                 goto error_iounmap;
 504         }
 505         /*
 506          *      Check to see if the monitor panic'd while booting.
 507          */
 508         if (status & MONITOR_PANIC) {
 509                 printk(KERN_ERR "%s%d: adapter monitor panic.\n",
 510                         dev->name, instance);
 511                 goto error_iounmap;
 512         }
 513         start = jiffies;
 514         /*
 515          *      Wait for the adapter to be up and running. Wait up to 3 minutes
 516          */
 517         while (!((status = src_readl(dev, MUnit.OMR)) &
 518                 KERNEL_UP_AND_RUNNING)) {
 519                 if ((restart &&
 520                   (status & (KERNEL_PANIC|SELF_TEST_FAILED|MONITOR_PANIC))) ||
 521                   time_after(jiffies, start+HZ*startup_timeout)) {
 522                         printk(KERN_ERR "%s%d: adapter kernel failed to start, init status = %lx.\n",
 523                                         dev->name, instance, status);
 524                         goto error_iounmap;
 525                 }
 526                 if (!restart &&
 527                   ((status & (KERNEL_PANIC|SELF_TEST_FAILED|MONITOR_PANIC)) ||
 528                   time_after(jiffies, start + HZ *
 529                   ((startup_timeout > 60)
 530                     ? (startup_timeout - 60)
 531                     : (startup_timeout / 2))))) {
 532                         if (likely(!aac_src_restart_adapter(dev,
 533                             aac_src_check_health(dev))))
 534                                 start = jiffies;
 535                         ++restart;
 536                 }
 537                 msleep(1);
 538         }
 539         if (restart && aac_commit)
 540                 aac_commit = 1;
 541         /*
 542          *      Fill in the common function dispatch table.
 543          */
 544         dev->a_ops.adapter_interrupt = aac_src_interrupt_adapter;
 545         dev->a_ops.adapter_disable_int = aac_src_disable_interrupt;
 546         dev->a_ops.adapter_notify = aac_src_notify_adapter;
 547         dev->a_ops.adapter_sync_cmd = src_sync_cmd;
 548         dev->a_ops.adapter_check_health = aac_src_check_health;
 549         dev->a_ops.adapter_restart = aac_src_restart_adapter;
 550
 551         /*
 552          *      First clear out all interrupts.  Then enable the one's that we
 553          *      can handle.
 554          */
 555         aac_adapter_comm(dev, AAC_COMM_MESSAGE);
 556         aac_adapter_disable_int(dev);
 557         src_writel(dev, MUnit.ODR_C, 0xffffffff);
 558         aac_adapter_enable_int(dev);
 559
 560         if (aac_init_adapter(dev) == NULL)
 561                 goto error_iounmap;
 562         if (dev->comm_interface != AAC_COMM_MESSAGE_TYPE1)
 563                 goto error_iounmap;
 564
 565         dev->msi = aac_msi && !pci_enable_msi(dev->pdev);
 566
 567         if (request_irq(dev->pdev->irq, dev->a_ops.adapter_intr,
 568                         IRQF_SHARED|IRQF_DISABLED, "aacraid", dev) < 0) {
 569
 570                 if (dev->msi)
 571                         pci_disable_msi(dev->pdev);
 572
 573                 printk(KERN_ERR "%s%d: Interrupt unavailable.\n",
 574                         name, instance);
 575                 goto error_iounmap;
 576         }
 577         dev->dbg_base = pci_resource_start(dev->pdev, 2);
 578         dev->dbg_base_mapped = dev->regs.src.bar1;
 579         dev->dbg_size = AAC_MIN_SRC_BAR1_SIZE;
 580
 581         aac_adapter_enable_int(dev);
 582         /*
 583          *      Tell the adapter that all is configured, and it can
 584          * start accepting requests
 585          */
 586         aac_src_start_adapter(dev);
 587
 588         return 0;
 589
 590 error_iounmap:
 591
 592         return -1;
 593 }