drivers/scsi/aacraid/commsup.c

   1 /*
   2  *      Adaptec AAC series RAID controller driver
   3  *      (c) Copyright 2001 Red Hat Inc. <alan@redhat.com>
   4  *
   5  * based on the old aacraid driver that is..
   6  * Adaptec aacraid device driver for Linux.
   7  *
   8  * Copyright (c) 2000-2007 Adaptec, Inc. (aacraid@adaptec.com)
   9  *
  10  * This program is free software; you can redistribute it and/or modify
  11  * it under the terms of the GNU General Public License as published by
  12  * the Free Software Foundation; either version 2, or (at your option)
  13  * any later version.
  14  *
  15  * This program is distributed in the hope that it will be useful,
  16  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  18  * GNU General Public License for more details.
  19  *
  20  * You should have received a copy of the GNU General Public License
  21  * along with this program; see the file COPYING.  If not, write to
  22  * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
  23  *
  24  * Module Name:
  25  *  commsup.c
  26  *
  27  * Abstract: Contain all routines that are required for FSA host/adapter
  28  *    communication.
  29  *
  30  */
  31
  32 #include <linux/kernel.h>
  33 #include <linux/init.h>
  34 #include <linux/types.h>
  35 #include <linux/sched.h>
  36 #include <linux/pci.h>
  37 #include <linux/spinlock.h>
  38 #include <linux/slab.h>
  39 #include <linux/completion.h>
  40 #include <linux/blkdev.h>
  41 #include <linux/delay.h>
  42 #include <linux/kthread.h>
  43 #include <linux/interrupt.h>
  44 #include <scsi/scsi.h>
  45 #include <scsi/scsi_host.h>
  46 #include <scsi/scsi_device.h>
  47 #include <scsi/scsi_cmnd.h>
  48 #include <asm/semaphore.h>
  49
  50 #include "aacraid.h"
  51
  52 /**
  53  *      fib_map_alloc           -       allocate the fib objects
  54  *      @dev: Adapter to allocate for
  55  *
  56  *      Allocate and map the shared PCI space for the FIB blocks used to
  57  *      talk to the Adaptec firmware.
  58  */
  59
  60 static int fib_map_alloc(struct aac_dev *dev)
  61 {
  62         dprintk((KERN_INFO
  63           "allocate hardware fibs pci_alloc_consistent(%p, %d * (%d + %d), %p)\n",
  64           dev->pdev, dev->max_fib_size, dev->scsi_host_ptr->can_queue,
  65           AAC_NUM_MGT_FIB, &dev->hw_fib_pa));
  66         if((dev->hw_fib_va = pci_alloc_consistent(dev->pdev, dev->max_fib_size
  67           * (dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB),
  68           &dev->hw_fib_pa))==NULL)
  69                 return -ENOMEM;
  70         return 0;
  71 }
  72
  73 /**
  74  *      aac_fib_map_free                -       free the fib objects
  75  *      @dev: Adapter to free
  76  *
  77  *      Free the PCI mappings and the memory allocated for FIB blocks
  78  *      on this adapter.
  79  */
  80
  81 void aac_fib_map_free(struct aac_dev *dev)
  82 {
  83         pci_free_consistent(dev->pdev, dev->max_fib_size * (dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB), dev->hw_fib_va, dev->hw_fib_pa);
  84 }
  85
  86 /**
  87  *      aac_fib_setup   -       setup the fibs
  88  *      @dev: Adapter to set up
  89  *
  90  *      Allocate the PCI space for the fibs, map it and then intialise the
  91  *      fib area, the unmapped fib data and also the free list
  92  */
  93
  94 int aac_fib_setup(struct aac_dev * dev)
  95 {
  96         struct fib *fibptr;
  97         struct hw_fib *hw_fib;
  98         dma_addr_t hw_fib_pa;
  99         int i;
 100
 101         while (((i = fib_map_alloc(dev)) == -ENOMEM)
 102          && (dev->scsi_host_ptr->can_queue > (64 - AAC_NUM_MGT_FIB))) {
 103                 dev->init->MaxIoCommands = cpu_to_le32((dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB) >> 1);
 104                 dev->scsi_host_ptr->can_queue = le32_to_cpu(dev->init->MaxIoCommands) - AAC_NUM_MGT_FIB;
 105         }
 106         if (i<0)
 107                 return -ENOMEM;
 108
 109         hw_fib = dev->hw_fib_va;
 110         hw_fib_pa = dev->hw_fib_pa;
 111         memset(hw_fib, 0, dev->max_fib_size * (dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB));
 112         /*
 113          *      Initialise the fibs
 114          */
 115         for (i = 0, fibptr = &dev->fibs[i]; i < (dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB); i++, fibptr++)
 116         {
 117                 fibptr->dev = dev;
 118                 fibptr->hw_fib_va = hw_fib;
 119                 fibptr->data = (void *) fibptr->hw_fib_va->data;
 120                 fibptr->next = fibptr+1;        /* Forward chain the fibs */
 121                 init_MUTEX_LOCKED(&fibptr->event_wait);
 122                 spin_lock_init(&fibptr->event_lock);
 123                 hw_fib->header.XferState = cpu_to_le32(0xffffffff);
 124                 hw_fib->header.SenderSize = cpu_to_le16(dev->max_fib_size);
 125                 fibptr->hw_fib_pa = hw_fib_pa;
 126                 hw_fib = (struct hw_fib *)((unsigned char *)hw_fib + dev->max_fib_size);
 127                 hw_fib_pa = hw_fib_pa + dev->max_fib_size;
 128         }
 129         /*
 130          *      Add the fib chain to the free list
 131          */
 132         dev->fibs[dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB - 1].next = NULL;
 133         /*
 134          *      Enable this to debug out of queue space
 135          */
 136         dev->free_fib = &dev->fibs[0];
 137         return 0;
 138 }
 139
 140 /**
 141  *      aac_fib_alloc   -       allocate a fib
 142  *      @dev: Adapter to allocate the fib for
 143  *
 144  *      Allocate a fib from the adapter fib pool. If the pool is empty we
 145  *      return NULL.
 146  */
 147
 148 struct fib *aac_fib_alloc(struct aac_dev *dev)
 149 {
 150         struct fib * fibptr;
 151         unsigned long flags;
 152         spin_lock_irqsave(&dev->fib_lock, flags);
 153         fibptr = dev->free_fib;
 154         if(!fibptr){
 155                 spin_unlock_irqrestore(&dev->fib_lock, flags);
 156                 return fibptr;
 157         }
 158         dev->free_fib = fibptr->next;
 159         spin_unlock_irqrestore(&dev->fib_lock, flags);
 160         /*
 161          *      Set the proper node type code and node byte size
 162          */
 163         fibptr->type = FSAFS_NTC_FIB_CONTEXT;
 164         fibptr->size = sizeof(struct fib);
 165         /*
 166          *      Null out fields that depend on being zero at the start of
 167          *      each I/O
 168          */
 169         fibptr->hw_fib_va->header.XferState = 0;
 170         fibptr->callback = NULL;
 171         fibptr->callback_data = NULL;
 172
 173         return fibptr;
 174 }
 175
 176 /**
 177  *      aac_fib_free    -       free a fib
 178  *      @fibptr: fib to free up
 179  *
 180  *      Frees up a fib and places it on the appropriate queue
 181  */
 182
 183 void aac_fib_free(struct fib *fibptr)
 184 {
 185         unsigned long flags;
 186
 187         spin_lock_irqsave(&fibptr->dev->fib_lock, flags);
 188         if (unlikely(fibptr->flags & FIB_CONTEXT_FLAG_TIMED_OUT))
 189                 aac_config.fib_timeouts++;
 190         if (fibptr->hw_fib_va->header.XferState != 0) {
 191                 printk(KERN_WARNING "aac_fib_free, XferState != 0, fibptr = 0x%p, XferState = 0x%x\n",
 192                          (void*)fibptr,
 193                          le32_to_cpu(fibptr->hw_fib_va->header.XferState));
 194         }
 195         fibptr->next = fibptr->dev->free_fib;
 196         fibptr->dev->free_fib = fibptr;
 197         spin_unlock_irqrestore(&fibptr->dev->fib_lock, flags);
 198 }
 199
 200 /**
 201  *      aac_fib_init    -       initialise a fib
 202  *      @fibptr: The fib to initialize
 203  *
 204  *      Set up the generic fib fields ready for use
 205  */
 206
 207 void aac_fib_init(struct fib *fibptr)
 208 {
 209         struct hw_fib *hw_fib = fibptr->hw_fib_va;
 210
 211         hw_fib->header.StructType = FIB_MAGIC;
 212         hw_fib->header.Size = cpu_to_le16(fibptr->dev->max_fib_size);
 213         hw_fib->header.XferState = cpu_to_le32(HostOwned | FibInitialized | FibEmpty | FastResponseCapable);
 214         hw_fib->header.SenderFibAddress = 0; /* Filled in later if needed */
 215         hw_fib->header.ReceiverFibAddress = cpu_to_le32(fibptr->hw_fib_pa);
 216         hw_fib->header.SenderSize = cpu_to_le16(fibptr->dev->max_fib_size);
 217 }
 218
 219 /**
 220  *      fib_deallocate          -       deallocate a fib
 221  *      @fibptr: fib to deallocate
 222  *
 223  *      Will deallocate and return to the free pool the FIB pointed to by the
 224  *      caller.
 225  */
 226
 227 static void fib_dealloc(struct fib * fibptr)
 228 {
 229         struct hw_fib *hw_fib = fibptr->hw_fib_va;
 230         BUG_ON(hw_fib->header.StructType != FIB_MAGIC);
 231         hw_fib->header.XferState = 0;
 232 }
 233
 234 /*
 235  *      Commuication primitives define and support the queuing method we use to
 236  *      support host to adapter commuication. All queue accesses happen through
 237  *      these routines and are the only routines which have a knowledge of the
 238  *       how these queues are implemented.
 239  */
 240
 241 /**
 242  *      aac_get_entry           -       get a queue entry
 243  *      @dev: Adapter
 244  *      @qid: Queue Number
 245  *      @entry: Entry return
 246  *      @index: Index return
 247  *      @nonotify: notification control
 248  *
 249  *      With a priority the routine returns a queue entry if the queue has free entries. If the queue
 250  *      is full(no free entries) than no entry is returned and the function returns 0 otherwise 1 is
 251  *      returned.
 252  */
 253
 254 static int aac_get_entry (struct aac_dev * dev, u32 qid, struct aac_entry **entry, u32 * index, unsigned long *nonotify)
 255 {
 256         struct aac_queue * q;
 257         unsigned long idx;
 258
 259         /*
 260          *      All of the queues wrap when they reach the end, so we check
 261          *      to see if they have reached the end and if they have we just
 262          *      set the index back to zero. This is a wrap. You could or off
 263          *      the high bits in all updates but this is a bit faster I think.
 264          */
 265
 266         q = &dev->queues->queue[qid];
 267
 268         idx = *index = le32_to_cpu(*(q->headers.producer));
 269         /* Interrupt Moderation, only interrupt for first two entries */
 270         if (idx != le32_to_cpu(*(q->headers.consumer))) {
 271                 if (--idx == 0) {
 272                         if (qid == AdapNormCmdQueue)
 273                                 idx = ADAP_NORM_CMD_ENTRIES;
 274                         else
 275                                 idx = ADAP_NORM_RESP_ENTRIES;
 276                 }
 277                 if (idx != le32_to_cpu(*(q->headers.consumer)))
 278                         *nonotify = 1;
 279         }
 280
 281         if (qid == AdapNormCmdQueue) {
 282                 if (*index >= ADAP_NORM_CMD_ENTRIES)
 283                         *index = 0; /* Wrap to front of the Producer Queue. */
 284         } else {
 285                 if (*index >= ADAP_NORM_RESP_ENTRIES)
 286                         *index = 0; /* Wrap to front of the Producer Queue. */
 287         }
 288
 289         if ((*index + 1) == le32_to_cpu(*(q->headers.consumer))) { /* Queue is full */
 290                 printk(KERN_WARNING "Queue %d full, %u outstanding.\n",
 291                                 qid, q->numpending);
 292                 return 0;
 293         } else {
 294                 *entry = q->base + *index;
 295                 return 1;
 296         }
 297 }
 298
 299 /**
 300  *      aac_queue_get           -       get the next free QE
 301  *      @dev: Adapter
 302  *      @index: Returned index
 303  *      @priority: Priority of fib
 304  *      @fib: Fib to associate with the queue entry
 305  *      @wait: Wait if queue full
 306  *      @fibptr: Driver fib object to go with fib
 307  *      @nonotify: Don't notify the adapter
 308  *
 309  *      Gets the next free QE off the requested priorty adapter command
 310  *      queue and associates the Fib with the QE. The QE represented by
 311  *      index is ready to insert on the queue when this routine returns
 312  *      success.
 313  */
 314
 315 int aac_queue_get(struct aac_dev * dev, u32 * index, u32 qid, struct hw_fib * hw_fib, int wait, struct fib * fibptr, unsigned long *nonotify)
 316 {
 317         struct aac_entry * entry = NULL;
 318         int map = 0;
 319
 320         if (qid == AdapNormCmdQueue) {
 321                 /*  if no entries wait for some if caller wants to */
 322                 while (!aac_get_entry(dev, qid, &entry, index, nonotify))
 323                 {
 324                         printk(KERN_ERR "GetEntries failed\n");
 325                 }
 326                 /*
 327                  *      Setup queue entry with a command, status and fib mapped
 328                  */
 329                 entry->size = cpu_to_le32(le16_to_cpu(hw_fib->header.Size));
 330                 map = 1;
 331         } else {
 332                 while(!aac_get_entry(dev, qid, &entry, index, nonotify))
 333                 {
 334                         /* if no entries wait for some if caller wants to */
 335                 }
 336                 /*
 337                  *      Setup queue entry with command, status and fib mapped
 338                  */
 339                 entry->size = cpu_to_le32(le16_to_cpu(hw_fib->header.Size));
 340                 entry->addr = hw_fib->header.SenderFibAddress;
 341                         /* Restore adapters pointer to the FIB */
 342                 hw_fib->header.ReceiverFibAddress = hw_fib->header.SenderFibAddress;    /* Let the adapter now where to find its data */
 343                 map = 0;
 344         }
 345         /*
 346          *      If MapFib is true than we need to map the Fib and put pointers
 347          *      in the queue entry.
 348          */
 349         if (map)
 350                 entry->addr = cpu_to_le32(fibptr->hw_fib_pa);
 351         return 0;
 352 }
 353
 354 /*
 355  *      Define the highest level of host to adapter communication routines.
 356  *      These routines will support host to adapter FS commuication. These
 357  *      routines have no knowledge of the commuication method used. This level
 358  *      sends and receives FIBs. This level has no knowledge of how these FIBs
 359  *      get passed back and forth.
 360  */
 361
 362 /**
 363  *      aac_fib_send    -       send a fib to the adapter
 364  *      @command: Command to send
 365  *      @fibptr: The fib
 366  *      @size: Size of fib data area
 367  *      @priority: Priority of Fib
 368  *      @wait: Async/sync select
 369  *      @reply: True if a reply is wanted
 370  *      @callback: Called with reply
 371  *      @callback_data: Passed to callback
 372  *
 373  *      Sends the requested FIB to the adapter and optionally will wait for a
 374  *      response FIB. If the caller does not wish to wait for a response than
 375  *      an event to wait on must be supplied. This event will be set when a
 376  *      response FIB is received from the adapter.
 377  */
 378
 379 int aac_fib_send(u16 command, struct fib *fibptr, unsigned long size,
 380                 int priority, int wait, int reply, fib_callback callback,
 381                 void *callback_data)
 382 {
 383         struct aac_dev * dev = fibptr->dev;
 384         struct hw_fib * hw_fib = fibptr->hw_fib_va;
 385         unsigned long flags = 0;
 386         unsigned long qflags;
 387
 388         if (!(hw_fib->header.XferState & cpu_to_le32(HostOwned)))
 389                 return -EBUSY;
 390         /*
 391          *      There are 5 cases with the wait and reponse requested flags.
 392          *      The only invalid cases are if the caller requests to wait and
 393          *      does not request a response and if the caller does not want a
 394          *      response and the Fib is not allocated from pool. If a response
 395          *      is not requesed the Fib will just be deallocaed by the DPC
 396          *      routine when the response comes back from the adapter. No
 397          *      further processing will be done besides deleting the Fib. We
 398          *      will have a debug mode where the adapter can notify the host
 399          *      it had a problem and the host can log that fact.
 400          */
 401         if (wait && !reply) {
 402                 return -EINVAL;
 403         } else if (!wait && reply) {
 404                 hw_fib->header.XferState |= cpu_to_le32(Async | ResponseExpected);
 405                 FIB_COUNTER_INCREMENT(aac_config.AsyncSent);
 406         } else if (!wait && !reply) {
 407                 hw_fib->header.XferState |= cpu_to_le32(NoResponseExpected);
 408                 FIB_COUNTER_INCREMENT(aac_config.NoResponseSent);
 409         } else if (wait && reply) {
 410                 hw_fib->header.XferState |= cpu_to_le32(ResponseExpected);
 411                 FIB_COUNTER_INCREMENT(aac_config.NormalSent);
 412         }
 413         /*
 414          *      Map the fib into 32bits by using the fib number
 415          */
 416
 417         hw_fib->header.SenderFibAddress = cpu_to_le32(((u32)(fibptr - dev->fibs)) << 2);
 418         hw_fib->header.SenderData = (u32)(fibptr - dev->fibs);
 419         /*
 420          *      Set FIB state to indicate where it came from and if we want a
 421          *      response from the adapter. Also load the command from the
 422          *      caller.
 423          *
 424          *      Map the hw fib pointer as a 32bit value
 425          */
 426         hw_fib->header.Command = cpu_to_le16(command);
 427         hw_fib->header.XferState |= cpu_to_le32(SentFromHost);
 428         fibptr->hw_fib_va->header.Flags = 0;    /* 0 the flags field - internal only*/
 429         /*
 430          *      Set the size of the Fib we want to send to the adapter
 431          */
 432         hw_fib->header.Size = cpu_to_le16(sizeof(struct aac_fibhdr) + size);
 433         if (le16_to_cpu(hw_fib->header.Size) > le16_to_cpu(hw_fib->header.SenderSize)) {
 434                 return -EMSGSIZE;
 435         }
 436         /*
 437          *      Get a queue entry connect the FIB to it and send an notify
 438          *      the adapter a command is ready.
 439          */
 440         hw_fib->header.XferState |= cpu_to_le32(NormalPriority);
 441
 442         /*
 443          *      Fill in the Callback and CallbackContext if we are not
 444          *      going to wait.
 445          */
 446         if (!wait) {
 447                 fibptr->callback = callback;
 448                 fibptr->callback_data = callback_data;
 449         }
 450
 451         fibptr->done = 0;
 452         fibptr->flags = 0;
 453
 454         FIB_COUNTER_INCREMENT(aac_config.FibsSent);
 455
 456         dprintk((KERN_DEBUG "Fib contents:.\n"));
 457         dprintk((KERN_DEBUG "  Command =               %d.\n", le32_to_cpu(hw_fib->header.Command)));
 458         dprintk((KERN_DEBUG "  SubCommand =            %d.\n", le32_to_cpu(((struct aac_query_mount *)fib_data(fibptr))->command)));
 459         dprintk((KERN_DEBUG "  XferState  =            %x.\n", le32_to_cpu(hw_fib->header.XferState)));
 460         dprintk((KERN_DEBUG "  hw_fib va being sent=%p\n",fibptr->hw_fib_va));
 461         dprintk((KERN_DEBUG "  hw_fib pa being sent=%lx\n",(ulong)fibptr->hw_fib_pa));
 462         dprintk((KERN_DEBUG "  fib being sent=%p\n",fibptr));
 463
 464         if (!dev->queues)
 465                 return -EBUSY;
 466
 467         if(wait)
 468                 spin_lock_irqsave(&fibptr->event_lock, flags);
 469         aac_adapter_deliver(fibptr);
 470
 471         /*
 472          *      If the caller wanted us to wait for response wait now.
 473          */
 474
 475         if (wait) {
 476                 spin_unlock_irqrestore(&fibptr->event_lock, flags);
 477                 /* Only set for first known interruptable command */
 478                 if (wait < 0) {
 479                         /*
 480                          * *VERY* Dangerous to time out a command, the
 481                          * assumption is made that we have no hope of
 482                          * functioning because an interrupt routing or other
 483                          * hardware failure has occurred.
 484                          */
 485                         unsigned long count = 36000000L; /* 3 minutes */
 486                         while (down_trylock(&fibptr->event_wait)) {
 487                                 int blink;
 488                                 if (--count == 0) {
 489                                         struct aac_queue * q = &dev->queues->queue[AdapNormCmdQueue];
 490                                         spin_lock_irqsave(q->lock, qflags);
 491                                         q->numpending--;
 492                                         spin_unlock_irqrestore(q->lock, qflags);
 493                                         if (wait == -1) {
 494                                                 printk(KERN_ERR "aacraid: aac_fib_send: first asynchronous command timed out.\n"
 495                                                   "Usually a result of a PCI interrupt routing problem;\n"
 496                                                   "update mother board BIOS or consider utilizing one of\n"
 497                                                   "the SAFE mode kernel options (acpi, apic etc)\n");
 498                                         }
 499                                         return -ETIMEDOUT;
 500                                 }
 501                                 if ((blink = aac_adapter_check_health(dev)) > 0) {
 502                                         if (wait == -1) {
 503                                                 printk(KERN_ERR "aacraid: aac_fib_send: adapter blinkLED 0x%x.\n"
 504                                                   "Usually a result of a serious unrecoverable hardware problem\n",
 505                                                   blink);
 506                                         }
 507                                         return -EFAULT;
 508                                 }
 509                                 udelay(5);
 510                         }
 511                 } else
 512                         (void)down_interruptible(&fibptr->event_wait);
 513                 spin_lock_irqsave(&fibptr->event_lock, flags);
 514                 if (fibptr->done == 0) {
 515                         fibptr->done = 2; /* Tell interrupt we aborted */
 516                         spin_unlock_irqrestore(&fibptr->event_lock, flags);
 517                         return -EINTR;
 518                 }
 519                 spin_unlock_irqrestore(&fibptr->event_lock, flags);
 520                 BUG_ON(fibptr->done == 0);
 521
 522                 if(unlikely(fibptr->flags & FIB_CONTEXT_FLAG_TIMED_OUT))
 523                         return -ETIMEDOUT;
 524                 return 0;
 525         }
 526         /*
 527          *      If the user does not want a response than return success otherwise
 528          *      return pending
 529          */
 530         if (reply)
 531                 return -EINPROGRESS;
 532         else
 533                 return 0;
 534 }
 535
 536 /**
 537  *      aac_consumer_get        -       get the top of the queue
 538  *      @dev: Adapter
 539  *      @q: Queue
 540  *      @entry: Return entry
 541  *
 542  *      Will return a pointer to the entry on the top of the queue requested that
 543  *      we are a consumer of, and return the address of the queue entry. It does
 544  *      not change the state of the queue.
 545  */
 546
 547 int aac_consumer_get(struct aac_dev * dev, struct aac_queue * q, struct aac_entry **entry)
 548 {
 549         u32 index;
 550         int status;
 551         if (le32_to_cpu(*q->headers.producer) == le32_to_cpu(*q->headers.consumer)) {
 552                 status = 0;
 553         } else {
 554                 /*
 555                  *      The consumer index must be wrapped if we have reached
 556                  *      the end of the queue, else we just use the entry
 557                  *      pointed to by the header index
 558                  */
 559                 if (le32_to_cpu(*q->headers.consumer) >= q->entries)
 560                         index = 0;
 561                 else
 562                         index = le32_to_cpu(*q->headers.consumer);
 563                 *entry = q->base + index;
 564                 status = 1;
 565         }
 566         return(status);
 567 }
 568
 569 /**
 570  *      aac_consumer_free       -       free consumer entry
 571  *      @dev: Adapter
 572  *      @q: Queue
 573  *      @qid: Queue ident
 574  *
 575  *      Frees up the current top of the queue we are a consumer of. If the
 576  *      queue was full notify the producer that the queue is no longer full.
 577  */
 578
 579 void aac_consumer_free(struct aac_dev * dev, struct aac_queue *q, u32 qid)
 580 {
 581         int wasfull = 0;
 582         u32 notify;
 583
 584         if ((le32_to_cpu(*q->headers.producer)+1) == le32_to_cpu(*q->headers.consumer))
 585                 wasfull = 1;
 586
 587         if (le32_to_cpu(*q->headers.consumer) >= q->entries)
 588                 *q->headers.consumer = cpu_to_le32(1);
 589         else
 590                 *q->headers.consumer = cpu_to_le32(le32_to_cpu(*q->headers.consumer)+1);
 591
 592         if (wasfull) {
 593                 switch (qid) {
 594
 595                 case HostNormCmdQueue:
 596                         notify = HostNormCmdNotFull;
 597                         break;
 598                 case HostNormRespQueue:
 599                         notify = HostNormRespNotFull;
 600                         break;
 601                 default:
 602                         BUG();
 603                         return;
 604                 }
 605                 aac_adapter_notify(dev, notify);
 606         }
 607 }
 608
 609 /**
 610  *      aac_fib_adapter_complete        -       complete adapter issued fib
 611  *      @fibptr: fib to complete
 612  *      @size: size of fib
 613  *
 614  *      Will do all necessary work to complete a FIB that was sent from
 615  *      the adapter.
 616  */
 617
 618 int aac_fib_adapter_complete(struct fib *fibptr, unsigned short size)
 619 {
 620         struct hw_fib * hw_fib = fibptr->hw_fib_va;
 621         struct aac_dev * dev = fibptr->dev;
 622         struct aac_queue * q;
 623         unsigned long nointr = 0;
 624         unsigned long qflags;
 625
 626         if (hw_fib->header.XferState == 0) {
 627                 if (dev->comm_interface == AAC_COMM_MESSAGE)
 628                         kfree (hw_fib);
 629                 return 0;
 630         }
 631         /*
 632          *      If we plan to do anything check the structure type first.
 633          */
 634         if ( hw_fib->header.StructType != FIB_MAGIC ) {
 635                 if (dev->comm_interface == AAC_COMM_MESSAGE)
 636                         kfree (hw_fib);
 637                 return -EINVAL;
 638         }
 639         /*
 640          *      This block handles the case where the adapter had sent us a
 641          *      command and we have finished processing the command. We
 642          *      call completeFib when we are done processing the command
 643          *      and want to send a response back to the adapter. This will
 644          *      send the completed cdb to the adapter.
 645          */
 646         if (hw_fib->header.XferState & cpu_to_le32(SentFromAdapter)) {
 647                 if (dev->comm_interface == AAC_COMM_MESSAGE) {
 648                         kfree (hw_fib);
 649                 } else {
 650                         u32 index;
 651                         hw_fib->header.XferState |= cpu_to_le32(HostProcessed);
 652                         if (size) {
 653                                 size += sizeof(struct aac_fibhdr);
 654                                 if (size > le16_to_cpu(hw_fib->header.SenderSize))
 655                                         return -EMSGSIZE;
 656                                 hw_fib->header.Size = cpu_to_le16(size);
 657                         }
 658                         q = &dev->queues->queue[AdapNormRespQueue];
 659                         spin_lock_irqsave(q->lock, qflags);
 660                         aac_queue_get(dev, &index, AdapNormRespQueue, hw_fib, 1, NULL, &nointr);
 661                         *(q->headers.producer) = cpu_to_le32(index + 1);
 662                         spin_unlock_irqrestore(q->lock, qflags);
 663                         if (!(nointr & (int)aac_config.irq_mod))
 664                                 aac_adapter_notify(dev, AdapNormRespQueue);
 665                 }
 666         }
 667         else
 668         {
 669                 printk(KERN_WARNING "aac_fib_adapter_complete: Unknown xferstate detected.\n");
 670                 BUG();
 671         }
 672         return 0;
 673 }
 674
 675 /**
 676  *      aac_fib_complete        -       fib completion handler
 677  *      @fib: FIB to complete
 678  *
 679  *      Will do all necessary work to complete a FIB.
 680  */
 681
 682 int aac_fib_complete(struct fib *fibptr)
 683 {
 684         struct hw_fib * hw_fib = fibptr->hw_fib_va;
 685
 686         /*
 687          *      Check for a fib which has already been completed
 688          */
 689
 690         if (hw_fib->header.XferState == 0)
 691                 return 0;
 692         /*
 693          *      If we plan to do anything check the structure type first.
 694          */
 695
 696         if (hw_fib->header.StructType != FIB_MAGIC)
 697                 return -EINVAL;
 698         /*
 699          *      This block completes a cdb which orginated on the host and we
 700          *      just need to deallocate the cdb or reinit it. At this point the
 701          *      command is complete that we had sent to the adapter and this
 702          *      cdb could be reused.
 703          */
 704         if((hw_fib->header.XferState & cpu_to_le32(SentFromHost)) &&
 705                 (hw_fib->header.XferState & cpu_to_le32(AdapterProcessed)))
 706         {
 707                 fib_dealloc(fibptr);
 708         }
 709         else if(hw_fib->header.XferState & cpu_to_le32(SentFromHost))
 710         {
 711                 /*
 712                  *      This handles the case when the host has aborted the I/O
 713                  *      to the adapter because the adapter is not responding
 714                  */
 715                 fib_dealloc(fibptr);
 716         } else if(hw_fib->header.XferState & cpu_to_le32(HostOwned)) {
 717                 fib_dealloc(fibptr);
 718         } else {
 719                 BUG();
 720         }
 721         return 0;
 722 }
 723
 724 /**
 725  *      aac_printf      -       handle printf from firmware
 726  *      @dev: Adapter
 727  *      @val: Message info
 728  *
 729  *      Print a message passed to us by the controller firmware on the
 730  *      Adaptec board
 731  */
 732
 733 void aac_printf(struct aac_dev *dev, u32 val)
 734 {
 735         char *cp = dev->printfbuf;
 736         if (dev->printf_enabled)
 737         {
 738                 int length = val & 0xffff;
 739                 int level = (val >> 16) & 0xffff;
 740
 741                 /*
 742                  *      The size of the printfbuf is set in port.c
 743                  *      There is no variable or define for it
 744                  */
 745                 if (length > 255)
 746                         length = 255;
 747                 if (cp[length] != 0)
 748                         cp[length] = 0;
 749                 if (level == LOG_AAC_HIGH_ERROR)
 750                         printk(KERN_WARNING "%s:%s", dev->name, cp);
 751                 else
 752                         printk(KERN_INFO "%s:%s", dev->name, cp);
 753         }
 754         memset(cp, 0,  256);
 755 }
 756
 757
 758 /**
 759  *      aac_handle_aif          -       Handle a message from the firmware
 760  *      @dev: Which adapter this fib is from
 761  *      @fibptr: Pointer to fibptr from adapter
 762  *
 763  *      This routine handles a driver notify fib from the adapter and
 764  *      dispatches it to the appropriate routine for handling.
 765  */
 766
 767 #define AIF_SNIFF_TIMEOUT       (30*HZ)
 768 static void aac_handle_aif(struct aac_dev * dev, struct fib * fibptr)
 769 {
 770         struct hw_fib * hw_fib = fibptr->hw_fib_va;
 771         struct aac_aifcmd * aifcmd = (struct aac_aifcmd *)hw_fib->data;
 772         u32 container;
 773         struct scsi_device *device;
 774         enum {
 775                 NOTHING,
 776                 DELETE,
 777                 ADD,
 778                 CHANGE
 779         } device_config_needed;
 780
 781         /* Sniff for container changes */
 782
 783         if (!dev || !dev->fsa_dev)
 784                 return;
 785         container = (u32)-1;
 786
 787         /*
 788          *      We have set this up to try and minimize the number of
 789          * re-configures that take place. As a result of this when
 790          * certain AIF's come in we will set a flag waiting for another
 791          * type of AIF before setting the re-config flag.
 792          */
 793         switch (le32_to_cpu(aifcmd->command)) {
 794         case AifCmdDriverNotify:
 795                 switch (le32_to_cpu(((u32 *)aifcmd->data)[0])) {
 796                 /*
 797                  *      Morph or Expand complete
 798                  */
 799                 case AifDenMorphComplete:
 800                 case AifDenVolumeExtendComplete:
 801                         container = le32_to_cpu(((u32 *)aifcmd->data)[1]);
 802                         if (container >= dev->maximum_num_containers)
 803                                 break;
 804
 805                         /*
 806                          *      Find the scsi_device associated with the SCSI
 807                          * address. Make sure we have the right array, and if
 808                          * so set the flag to initiate a new re-config once we
 809                          * see an AifEnConfigChange AIF come through.
 810                          */
 811
 812                         if ((dev != NULL) && (dev->scsi_host_ptr != NULL)) {
 813                                 device = scsi_device_lookup(dev->scsi_host_ptr,
 814                                         CONTAINER_TO_CHANNEL(container),
 815                                         CONTAINER_TO_ID(container),
 816                                         CONTAINER_TO_LUN(container));
 817                                 if (device) {
 818                                         dev->fsa_dev[container].config_needed = CHANGE;
 819                                         dev->fsa_dev[container].config_waiting_on = AifEnConfigChange;
 820                                         dev->fsa_dev[container].config_waiting_stamp = jiffies;
 821                                         scsi_device_put(device);
 822                                 }
 823                         }
 824                 }
 825
 826                 /*
 827                  *      If we are waiting on something and this happens to be
 828                  * that thing then set the re-configure flag.
 829                  */
 830                 if (container != (u32)-1) {
 831                         if (container >= dev->maximum_num_containers)
 832                                 break;
 833                         if ((dev->fsa_dev[container].config_waiting_on ==
 834                             le32_to_cpu(*(u32 *)aifcmd->data)) &&
 835                          time_before(jiffies, dev->fsa_dev[container].config_waiting_stamp + AIF_SNIFF_TIMEOUT))
 836                                 dev->fsa_dev[container].config_waiting_on = 0;
 837                 } else for (container = 0;
 838                     container < dev->maximum_num_containers; ++container) {
 839                         if ((dev->fsa_dev[container].config_waiting_on ==
 840                             le32_to_cpu(*(u32 *)aifcmd->data)) &&
 841                          time_before(jiffies, dev->fsa_dev[container].config_waiting_stamp + AIF_SNIFF_TIMEOUT))
 842                                 dev->fsa_dev[container].config_waiting_on = 0;
 843                 }
 844                 break;
 845
 846         case AifCmdEventNotify:
 847                 switch (le32_to_cpu(((u32 *)aifcmd->data)[0])) {
 848                 /*
 849                  *      Add an Array.
 850                  */
 851                 case AifEnAddContainer:
 852                         container = le32_to_cpu(((u32 *)aifcmd->data)[1]);
 853                         if (container >= dev->maximum_num_containers)
 854                                 break;
 855                         dev->fsa_dev[container].config_needed = ADD;
 856                         dev->fsa_dev[container].config_waiting_on =
 857                                 AifEnConfigChange;
 858                         dev->fsa_dev[container].config_waiting_stamp = jiffies;
 859                         break;
 860
 861                 /*
 862                  *      Delete an Array.
 863                  */
 864                 case AifEnDeleteContainer:
 865                         container = le32_to_cpu(((u32 *)aifcmd->data)[1]);
 866                         if (container >= dev->maximum_num_containers)
 867                                 break;
 868                         dev->fsa_dev[container].config_needed = DELETE;
 869                         dev->fsa_dev[container].config_waiting_on =
 870                                 AifEnConfigChange;
 871                         dev->fsa_dev[container].config_waiting_stamp = jiffies;
 872                         break;
 873
 874                 /*
 875                  *      Container change detected. If we currently are not
 876                  * waiting on something else, setup to wait on a Config Change.
 877                  */
 878                 case AifEnContainerChange:
 879                         container = le32_to_cpu(((u32 *)aifcmd->data)[1]);
 880                         if (container >= dev->maximum_num_containers)
 881                                 break;
 882                         if (dev->fsa_dev[container].config_waiting_on &&
 883                          time_before(jiffies, dev->fsa_dev[container].config_waiting_stamp + AIF_SNIFF_TIMEOUT))
 884                                 break;
 885                         dev->fsa_dev[container].config_needed = CHANGE;
 886                         dev->fsa_dev[container].config_waiting_on =
 887                                 AifEnConfigChange;
 888                         dev->fsa_dev[container].config_waiting_stamp = jiffies;
 889                         break;
 890
 891                 case AifEnConfigChange:
 892                         break;
 893
 894                 }
 895
 896                 /*
 897                  *      If we are waiting on something and this happens to be
 898                  * that thing then set the re-configure flag.
 899                  */
 900                 if (container != (u32)-1) {
 901                         if (container >= dev->maximum_num_containers)
 902                                 break;
 903                         if ((dev->fsa_dev[container].config_waiting_on ==
 904                             le32_to_cpu(*(u32 *)aifcmd->data)) &&
 905                          time_before(jiffies, dev->fsa_dev[container].config_waiting_stamp + AIF_SNIFF_TIMEOUT))
 906                                 dev->fsa_dev[container].config_waiting_on = 0;
 907                 } else for (container = 0;
 908                     container < dev->maximum_num_containers; ++container) {
 909                         if ((dev->fsa_dev[container].config_waiting_on ==
 910                             le32_to_cpu(*(u32 *)aifcmd->data)) &&
 911                          time_before(jiffies, dev->fsa_dev[container].config_waiting_stamp + AIF_SNIFF_TIMEOUT))
 912                                 dev->fsa_dev[container].config_waiting_on = 0;
 913                 }
 914                 break;
 915
 916         case AifCmdJobProgress:
 917                 /*
 918                  *      These are job progress AIF's. When a Clear is being
 919                  * done on a container it is initially created then hidden from
 920                  * the OS. When the clear completes we don't get a config
 921                  * change so we monitor the job status complete on a clear then
 922                  * wait for a container change.
 923                  */
 924
 925                 if ((((u32 *)aifcmd->data)[1] == cpu_to_le32(AifJobCtrZero))
 926                  && ((((u32 *)aifcmd->data)[6] == ((u32 *)aifcmd->data)[5])
 927                   || (((u32 *)aifcmd->data)[4] == cpu_to_le32(AifJobStsSuccess)))) {
 928                         for (container = 0;
 929                             container < dev->maximum_num_containers;
 930                             ++container) {
 931                                 /*
 932                                  * Stomp on all config sequencing for all
 933                                  * containers?
 934                                  */
 935                                 dev->fsa_dev[container].config_waiting_on =
 936                                         AifEnContainerChange;
 937                                 dev->fsa_dev[container].config_needed = ADD;
 938                                 dev->fsa_dev[container].config_waiting_stamp =
 939                                         jiffies;
 940                         }
 941                 }
 942                 if ((((u32 *)aifcmd->data)[1] == cpu_to_le32(AifJobCtrZero))
 943                  && (((u32 *)aifcmd->data)[6] == 0)
 944                  && (((u32 *)aifcmd->data)[4] == cpu_to_le32(AifJobStsRunning))) {
 945                         for (container = 0;
 946                             container < dev->maximum_num_containers;
 947                             ++container) {
 948                                 /*
 949                                  * Stomp on all config sequencing for all
 950                                  * containers?
 951                                  */
 952                                 dev->fsa_dev[container].config_waiting_on =
 953                                         AifEnContainerChange;
 954                                 dev->fsa_dev[container].config_needed = DELETE;
 955                                 dev->fsa_dev[container].config_waiting_stamp =
 956                                         jiffies;
 957                         }
 958                 }
 959                 break;
 960         }
 961
 962         device_config_needed = NOTHING;
 963         for (container = 0; container < dev->maximum_num_containers;
 964             ++container) {
 965                 if ((dev->fsa_dev[container].config_waiting_on == 0) &&
 966                         (dev->fsa_dev[container].config_needed != NOTHING) &&
 967                         time_before(jiffies, dev->fsa_dev[container].config_waiting_stamp + AIF_SNIFF_TIMEOUT)) {
 968                         device_config_needed =
 969                                 dev->fsa_dev[container].config_needed;
 970                         dev->fsa_dev[container].config_needed = NOTHING;
 971                         break;
 972                 }
 973         }
 974         if (device_config_needed == NOTHING)
 975                 return;
 976
 977         /*
 978          *      If we decided that a re-configuration needs to be done,
 979          * schedule it here on the way out the door, please close the door
 980          * behind you.
 981          */
 982
 983         /*
 984          *      Find the scsi_device associated with the SCSI address,
 985          * and mark it as changed, invalidating the cache. This deals
 986          * with changes to existing device IDs.
 987          */
 988
 989         if (!dev || !dev->scsi_host_ptr)
 990                 return;
 991         /*
 992          * force reload of disk info via aac_probe_container
 993          */
 994         if ((device_config_needed == CHANGE)
 995          && (dev->fsa_dev[container].valid == 1))
 996                 dev->fsa_dev[container].valid = 2;
 997         if ((device_config_needed == CHANGE) ||
 998                         (device_config_needed == ADD))
 999                 aac_probe_container(dev, container);
1000         device = scsi_device_lookup(dev->scsi_host_ptr,
1001                 CONTAINER_TO_CHANNEL(container),
1002                 CONTAINER_TO_ID(container),
1003                 CONTAINER_TO_LUN(container));
1004         if (device) {
1005                 switch (device_config_needed) {
1006                 case DELETE:
1007                 case CHANGE:
1008                         scsi_rescan_device(&device->sdev_gendev);
1009
1010                 default:
1011                         break;
1012                 }
1013                 scsi_device_put(device);
1014         }
1015         if (device_config_needed == ADD) {
1016                 scsi_add_device(dev->scsi_host_ptr,
1017                   CONTAINER_TO_CHANNEL(container),
1018                   CONTAINER_TO_ID(container),
1019                   CONTAINER_TO_LUN(container));
1020         }
1021
1022 }
1023
1024 static int _aac_reset_adapter(struct aac_dev *aac)
1025 {
1026         int index, quirks;
1027         int retval;
1028         struct Scsi_Host *host;
1029         struct scsi_device *dev;
1030         struct scsi_cmnd *command;
1031         struct scsi_cmnd *command_list;
1032
1033         /*
1034          * Assumptions:
1035          *      - host is locked.
1036          *      - in_reset is asserted, so no new i/o is getting to the
1037          *        card.
1038          *      - The card is dead.
1039          */
1040         host = aac->scsi_host_ptr;
1041         scsi_block_requests(host);
1042         aac_adapter_disable_int(aac);
1043         spin_unlock_irq(host->host_lock);
1044         kthread_stop(aac->thread);
1045
1046         /*
1047          *      If a positive health, means in a known DEAD PANIC
1048          * state and the adapter could be reset to `try again'.
1049          */
1050         retval = aac_adapter_restart(aac, aac_adapter_check_health(aac));
1051
1052         if (retval)
1053                 goto out;
1054
1055         /*
1056          *      Loop through the fibs, close the synchronous FIBS
1057          */
1058         for (retval = 1, index = 0; index < (aac->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB); index++) {
1059                 struct fib *fib = &aac->fibs[index];
1060                 if (!(fib->hw_fib_va->header.XferState & cpu_to_le32(NoResponseExpected | Async)) &&
1061                   (fib->hw_fib_va->header.XferState & cpu_to_le32(ResponseExpected))) {
1062                         unsigned long flagv;
1063                         spin_lock_irqsave(&fib->event_lock, flagv);
1064                         up(&fib->event_wait);
1065                         spin_unlock_irqrestore(&fib->event_lock, flagv);
1066                         schedule();
1067                         retval = 0;
1068                 }
1069         }
1070         /* Give some extra time for ioctls to complete. */
1071         if (retval == 0)
1072                 ssleep(2);
1073         index = aac->cardtype;
1074
1075         /*
1076          * Re-initialize the adapter, first free resources, then carefully
1077          * apply the initialization sequence to come back again. Only risk
1078          * is a change in Firmware dropping cache, it is assumed the caller
1079          * will ensure that i/o is queisced and the card is flushed in that
1080          * case.
1081          */
1082         aac_fib_map_free(aac);
1083         aac->hw_fib_va = NULL;
1084         aac->hw_fib_pa = 0;
1085         pci_free_consistent(aac->pdev, aac->comm_size, aac->comm_addr, aac->comm_phys);
1086         aac->comm_addr = NULL;
1087         aac->comm_phys = 0;
1088         kfree(aac->queues);
1089         aac->queues = NULL;
1090         free_irq(aac->pdev->irq, aac);
1091         kfree(aac->fsa_dev);
1092         aac->fsa_dev = NULL;
1093         if (aac_get_driver_ident(index)->quirks & AAC_QUIRK_31BIT) {
1094                 if (((retval = pci_set_dma_mask(aac->pdev, DMA_32BIT_MASK))) ||
1095                   ((retval = pci_set_consistent_dma_mask(aac->pdev, DMA_32BIT_MASK))))
1096                         goto out;
1097         } else {
1098                 if (((retval = pci_set_dma_mask(aac->pdev, 0x7FFFFFFFULL))) ||
1099                   ((retval = pci_set_consistent_dma_mask(aac->pdev, 0x7FFFFFFFULL))))
1100                         goto out;
1101         }
1102         if ((retval = (*(aac_get_driver_ident(index)->init))(aac)))
1103                 goto out;
1104         if (aac_get_driver_ident(index)->quirks & AAC_QUIRK_31BIT)
1105                 if ((retval = pci_set_dma_mask(aac->pdev, DMA_32BIT_MASK)))
1106                         goto out;
1107         aac->thread = kthread_run(aac_command_thread, aac, aac->name);
1108         if (IS_ERR(aac->thread)) {
1109                 retval = PTR_ERR(aac->thread);
1110                 goto out;
1111         }
1112         (void)aac_get_adapter_info(aac);
1113         quirks = aac_get_driver_ident(index)->quirks;
1114         if ((quirks & AAC_QUIRK_34SG) && (host->sg_tablesize > 34)) {
1115                 host->sg_tablesize = 34;
1116                 host->max_sectors = (host->sg_tablesize * 8) + 112;
1117         }
1118         if ((quirks & AAC_QUIRK_17SG) && (host->sg_tablesize > 17)) {
1119                 host->sg_tablesize = 17;
1120                 host->max_sectors = (host->sg_tablesize * 8) + 112;
1121         }
1122         aac_get_config_status(aac, 1);
1123         aac_get_containers(aac);
1124         /*
1125          * This is where the assumption that the Adapter is quiesced
1126          * is important.
1127          */
1128         command_list = NULL;
1129         __shost_for_each_device(dev, host) {
1130                 unsigned long flags;
1131                 spin_lock_irqsave(&dev->list_lock, flags);
1132                 list_for_each_entry(command, &dev->cmd_list, list)
1133                         if (command->SCp.phase == AAC_OWNER_FIRMWARE) {
1134                                 command->SCp.buffer = (struct scatterlist *)command_list;
1135                                 command_list = command;
1136                         }
1137                 spin_unlock_irqrestore(&dev->list_lock, flags);
1138         }
1139         while ((command = command_list)) {
1140                 command_list = (struct scsi_cmnd *)command->SCp.buffer;
1141                 command->SCp.buffer = NULL;
1142                 command->result = DID_OK << 16
1143                   | COMMAND_COMPLETE << 8
1144                   | SAM_STAT_TASK_SET_FULL;
1145                 command->SCp.phase = AAC_OWNER_ERROR_HANDLER;
1146                 command->scsi_done(command);
1147         }
1148         retval = 0;
1149
1150 out:
1151         aac->in_reset = 0;
1152         scsi_unblock_requests(host);
1153         spin_lock_irq(host->host_lock);
1154         return retval;
1155 }
1156
1157 int aac_check_health(struct aac_dev * aac)
1158 {
1159         int BlinkLED;
1160         unsigned long time_now, flagv = 0;
1161         struct list_head * entry;
1162         struct Scsi_Host * host;
1163
1164         /* Extending the scope of fib_lock slightly to protect aac->in_reset */
1165         if (spin_trylock_irqsave(&aac->fib_lock, flagv) == 0)
1166                 return 0;
1167
1168         if (aac->in_reset || !(BlinkLED = aac_adapter_check_health(aac))) {
1169                 spin_unlock_irqrestore(&aac->fib_lock, flagv);
1170                 return 0; /* OK */
1171         }
1172
1173         aac->in_reset = 1;
1174
1175         /* Fake up an AIF:
1176          *      aac_aifcmd.command = AifCmdEventNotify = 1
1177          *      aac_aifcmd.seqnum = 0xFFFFFFFF
1178          *      aac_aifcmd.data[0] = AifEnExpEvent = 23
1179          *      aac_aifcmd.data[1] = AifExeFirmwarePanic = 3
1180          *      aac.aifcmd.data[2] = AifHighPriority = 3
1181          *      aac.aifcmd.data[3] = BlinkLED
1182          */
1183
1184         time_now = jiffies/HZ;
1185         entry = aac->fib_list.next;
1186
1187         /*
1188          * For each Context that is on the
1189          * fibctxList, make a copy of the
1190          * fib, and then set the event to wake up the
1191          * thread that is waiting for it.
1192          */
1193         while (entry != &aac->fib_list) {
1194                 /*
1195                  * Extract the fibctx
1196                  */
1197                 struct aac_fib_context *fibctx = list_entry(entry, struct aac_fib_context, next);
1198                 struct hw_fib * hw_fib;
1199                 struct fib * fib;
1200                 /*
1201                  * Check if the queue is getting
1202                  * backlogged
1203                  */
1204                 if (fibctx->count > 20) {
1205                         /*
1206                          * It's *not* jiffies folks,
1207                          * but jiffies / HZ, so do not
1208                          * panic ...
1209                          */
1210                         u32 time_last = fibctx->jiffies;
1211                         /*
1212                          * Has it been > 2 minutes
1213                          * since the last read off
1214                          * the queue?
1215                          */
1216                         if ((time_now - time_last) > aif_timeout) {
1217                                 entry = entry->next;
1218                                 aac_close_fib_context(aac, fibctx);
1219                                 continue;
1220                         }
1221                 }
1222                 /*
1223                  * Warning: no sleep allowed while
1224                  * holding spinlock
1225                  */
1226                 hw_fib = kzalloc(sizeof(struct hw_fib), GFP_ATOMIC);
1227                 fib = kzalloc(sizeof(struct fib), GFP_ATOMIC);
1228                 if (fib && hw_fib) {
1229                         struct aac_aifcmd * aif;
1230
1231                         fib->hw_fib_va = hw_fib;
1232                         fib->dev = aac;
1233                         aac_fib_init(fib);
1234                         fib->type = FSAFS_NTC_FIB_CONTEXT;
1235                         fib->size = sizeof (struct fib);
1236                         fib->data = hw_fib->data;
1237                         aif = (struct aac_aifcmd *)hw_fib->data;
1238                         aif->command = cpu_to_le32(AifCmdEventNotify);
1239                         aif->seqnum = cpu_to_le32(0xFFFFFFFF);
1240                         aif->data[0] = cpu_to_le32(AifEnExpEvent);
1241                         aif->data[1] = cpu_to_le32(AifExeFirmwarePanic);
1242                         aif->data[2] = cpu_to_le32(AifHighPriority);
1243                         aif->data[3] = cpu_to_le32(BlinkLED);
1244
1245                         /*
1246                          * Put the FIB onto the
1247                          * fibctx's fibs
1248                          */
1249                         list_add_tail(&fib->fiblink, &fibctx->fib_list);
1250                         fibctx->count++;
1251                         /*
1252                          * Set the event to wake up the
1253                          * thread that will waiting.
1254                          */
1255                         up(&fibctx->wait_sem);
1256                 } else {
1257                         printk(KERN_WARNING "aifd: didn't allocate NewFib.\n");
1258                         kfree(fib);
1259                         kfree(hw_fib);
1260                 }
1261                 entry = entry->next;
1262         }
1263
1264         spin_unlock_irqrestore(&aac->fib_lock, flagv);
1265
1266         if (BlinkLED < 0) {
1267                 printk(KERN_ERR "%s: Host adapter dead %d\n", aac->name, BlinkLED);
1268                 goto out;
1269         }
1270
1271         printk(KERN_ERR "%s: Host adapter BLINK LED 0x%x\n", aac->name, BlinkLED);
1272
1273         host = aac->scsi_host_ptr;
1274         spin_lock_irqsave(host->host_lock, flagv);
1275         BlinkLED = _aac_reset_adapter(aac);
1276         spin_unlock_irqrestore(host->host_lock, flagv);
1277         return BlinkLED;
1278
1279 out:
1280         aac->in_reset = 0;
1281         return BlinkLED;
1282 }
1283
1284
1285 /**
1286  *      aac_command_thread      -       command processing thread
1287  *      @dev: Adapter to monitor
1288  *
1289  *      Waits on the commandready event in it's queue. When the event gets set
1290  *      it will pull FIBs off it's queue. It will continue to pull FIBs off
1291  *      until the queue is empty. When the queue is empty it will wait for
1292  *      more FIBs.
1293  */
1294
1295 int aac_command_thread(void *data)
1296 {
1297         struct aac_dev *dev = data;
1298         struct hw_fib *hw_fib, *hw_newfib;
1299         struct fib *fib, *newfib;
1300         struct aac_fib_context *fibctx;
1301         unsigned long flags;
1302         DECLARE_WAITQUEUE(wait, current);
1303
1304         /*
1305          *      We can only have one thread per adapter for AIF's.
1306          */
1307         if (dev->aif_thread)
1308                 return -EINVAL;
1309
1310         /*
1311          *      Let the DPC know it has a place to send the AIF's to.
1312          */
1313         dev->aif_thread = 1;
1314         add_wait_queue(&dev->queues->queue[HostNormCmdQueue].cmdready, &wait);
1315         set_current_state(TASK_INTERRUPTIBLE);
1316         dprintk ((KERN_INFO "aac_command_thread start\n"));
1317         while(1)
1318         {
1319                 spin_lock_irqsave(dev->queues->queue[HostNormCmdQueue].lock, flags);
1320                 while(!list_empty(&(dev->queues->queue[HostNormCmdQueue].cmdq))) {
1321                         struct list_head *entry;
1322                         struct aac_aifcmd * aifcmd;
1323
1324                         set_current_state(TASK_RUNNING);
1325
1326                         entry = dev->queues->queue[HostNormCmdQueue].cmdq.next;
1327                         list_del(entry);
1328
1329                         spin_unlock_irqrestore(dev->queues->queue[HostNormCmdQueue].lock, flags);
1330                         fib = list_entry(entry, struct fib, fiblink);
1331                         /*
1332                          *      We will process the FIB here or pass it to a
1333                          *      worker thread that is TBD. We Really can't
1334                          *      do anything at this point since we don't have
1335                          *      anything defined for this thread to do.
1336                          */
1337                         hw_fib = fib->hw_fib_va;
1338                         memset(fib, 0, sizeof(struct fib));
1339                         fib->type = FSAFS_NTC_FIB_CONTEXT;
1340                         fib->size = sizeof( struct fib );
1341                         fib->hw_fib_va = hw_fib;
1342                         fib->data = hw_fib->data;
1343                         fib->dev = dev;
1344                         /*
1345                          *      We only handle AifRequest fibs from the adapter.
1346                          */
1347                         aifcmd = (struct aac_aifcmd *) hw_fib->data;
1348                         if (aifcmd->command == cpu_to_le32(AifCmdDriverNotify)) {
1349                                 /* Handle Driver Notify Events */
1350                                 aac_handle_aif(dev, fib);
1351                                 *(__le32 *)hw_fib->data = cpu_to_le32(ST_OK);
1352                                 aac_fib_adapter_complete(fib, (u16)sizeof(u32));
1353                         } else {
1354                                 struct list_head *entry;
1355                                 /* The u32 here is important and intended. We are using
1356                                    32bit wrapping time to fit the adapter field */
1357
1358                                 u32 time_now, time_last;
1359                                 unsigned long flagv;
1360                                 unsigned num;
1361                                 struct hw_fib ** hw_fib_pool, ** hw_fib_p;
1362                                 struct fib ** fib_pool, ** fib_p;
1363
1364                                 /* Sniff events */
1365                                 if ((aifcmd->command ==
1366                                      cpu_to_le32(AifCmdEventNotify)) ||
1367                                     (aifcmd->command ==
1368                                      cpu_to_le32(AifCmdJobProgress))) {
1369                                         aac_handle_aif(dev, fib);
1370                                 }
1371
1372                                 time_now = jiffies/HZ;
1373
1374                                 /*
1375                                  * Warning: no sleep allowed while
1376                                  * holding spinlock. We take the estimate
1377                                  * and pre-allocate a set of fibs outside the
1378                                  * lock.
1379                                  */
1380                                 num = le32_to_cpu(dev->init->AdapterFibsSize)
1381                                     / sizeof(struct hw_fib); /* some extra */
1382                                 spin_lock_irqsave(&dev->fib_lock, flagv);
1383                                 entry = dev->fib_list.next;
1384                                 while (entry != &dev->fib_list) {
1385                                         entry = entry->next;
1386                                         ++num;
1387                                 }
1388                                 spin_unlock_irqrestore(&dev->fib_lock, flagv);
1389                                 hw_fib_pool = NULL;
1390                                 fib_pool = NULL;
1391                                 if (num
1392                                  && ((hw_fib_pool = kmalloc(sizeof(struct hw_fib *) * num, GFP_KERNEL)))
1393                                  && ((fib_pool = kmalloc(sizeof(struct fib *) * num, GFP_KERNEL)))) {
1394                                         hw_fib_p = hw_fib_pool;
1395                                         fib_p = fib_pool;
1396                                         while (hw_fib_p < &hw_fib_pool[num]) {
1397                                                 if (!(*(hw_fib_p++) = kmalloc(sizeof(struct hw_fib), GFP_KERNEL))) {
1398                                                         --hw_fib_p;
1399                                                         break;
1400                                                 }
1401                                                 if (!(*(fib_p++) = kmalloc(sizeof(struct fib), GFP_KERNEL))) {
1402                                                         kfree(*(--hw_fib_p));
1403                                                         break;
1404                                                 }
1405                                         }
1406                                         if ((num = hw_fib_p - hw_fib_pool) == 0) {
1407                                                 kfree(fib_pool);
1408                                                 fib_pool = NULL;
1409                                                 kfree(hw_fib_pool);
1410                                                 hw_fib_pool = NULL;
1411                                         }
1412                                 } else {
1413                                         kfree(hw_fib_pool);
1414                                         hw_fib_pool = NULL;
1415                                 }
1416                                 spin_lock_irqsave(&dev->fib_lock, flagv);
1417                                 entry = dev->fib_list.next;
1418                                 /*
1419                                  * For each Context that is on the
1420                                  * fibctxList, make a copy of the
1421                                  * fib, and then set the event to wake up the
1422                                  * thread that is waiting for it.
1423                                  */
1424                                 hw_fib_p = hw_fib_pool;
1425                                 fib_p = fib_pool;
1426                                 while (entry != &dev->fib_list) {
1427                                         /*
1428                                          * Extract the fibctx
1429                                          */
1430                                         fibctx = list_entry(entry, struct aac_fib_context, next);
1431                                         /*
1432                                          * Check if the queue is getting
1433                                          * backlogged
1434                                          */
1435                                         if (fibctx->count > 20)
1436                                         {
1437                                                 /*
1438                                                  * It's *not* jiffies folks,
1439                                                  * but jiffies / HZ so do not
1440                                                  * panic ...
1441                                                  */
1442                                                 time_last = fibctx->jiffies;
1443                                                 /*
1444                                                  * Has it been > 2 minutes
1445                                                  * since the last read off
1446                                                  * the queue?
1447                                                  */
1448                                                 if ((time_now - time_last) > aif_timeout) {
1449                                                         entry = entry->next;
1450                                                         aac_close_fib_context(dev, fibctx);
1451                                                         continue;
1452                                                 }
1453                                         }
1454                                         /*
1455                                          * Warning: no sleep allowed while
1456                                          * holding spinlock
1457                                          */
1458                                         if (hw_fib_p < &hw_fib_pool[num]) {
1459                                                 hw_newfib = *hw_fib_p;
1460                                                 *(hw_fib_p++) = NULL;
1461                                                 newfib = *fib_p;
1462                                                 *(fib_p++) = NULL;
1463                                                 /*
1464                                                  * Make the copy of the FIB
1465                                                  */
1466                                                 memcpy(hw_newfib, hw_fib, sizeof(struct hw_fib));
1467                                                 memcpy(newfib, fib, sizeof(struct fib));
1468                                                 newfib->hw_fib_va = hw_newfib;
1469                                                 /*
1470                                                  * Put the FIB onto the
1471                                                  * fibctx's fibs
1472                                                  */
1473                                                 list_add_tail(&newfib->fiblink, &fibctx->fib_list);
1474                                                 fibctx->count++;
1475                                                 /*
1476                                                  * Set the event to wake up the
1477                                                  * thread that is waiting.
1478                                                  */
1479                                                 up(&fibctx->wait_sem);
1480                                         } else {
1481                                                 printk(KERN_WARNING "aifd: didn't allocate NewFib.\n");
1482                                         }
1483                                         entry = entry->next;
1484                                 }
1485                                 /*
1486                                  *      Set the status of this FIB
1487                                  */
1488                                 *(__le32 *)hw_fib->data = cpu_to_le32(ST_OK);
1489                                 aac_fib_adapter_complete(fib, sizeof(u32));
1490                                 spin_unlock_irqrestore(&dev->fib_lock, flagv);
1491                                 /* Free up the remaining resources */
1492                                 hw_fib_p = hw_fib_pool;
1493                                 fib_p = fib_pool;
1494                                 while (hw_fib_p < &hw_fib_pool[num]) {
1495                                         kfree(*hw_fib_p);
1496                                         kfree(*fib_p);
1497                                         ++fib_p;
1498                                         ++hw_fib_p;
1499                                 }
1500                                 kfree(hw_fib_pool);
1501                                 kfree(fib_pool);
1502                         }
1503                         kfree(fib);
1504                         spin_lock_irqsave(dev->queues->queue[HostNormCmdQueue].lock, flags);
1505                 }
1506                 /*
1507                  *      There are no more AIF's
1508                  */
1509                 spin_unlock_irqrestore(dev->queues->queue[HostNormCmdQueue].lock, flags);
1510                 schedule();
1511
1512                 if (kthread_should_stop())
1513                         break;
1514                 set_current_state(TASK_INTERRUPTIBLE);
1515         }
1516         if (dev->queues)
1517                 remove_wait_queue(&dev->queues->queue[HostNormCmdQueue].cmdready, &wait);
1518         dev->aif_thread = 0;
1519         return 0;
1520 }