mm: thp: set the accessed flag for old pages on access fault
[pandora-kernel.git] / drivers / rtc / rtc-mxc.c
1 /*
2  * Copyright 2004-2008 Freescale Semiconductor, Inc. All Rights Reserved.
3  *
4  * The code contained herein is licensed under the GNU General Public
5  * License. You may obtain a copy of the GNU General Public License
6  * Version 2 or later at the following locations:
7  *
8  * http://www.opensource.org/licenses/gpl-license.html
9  * http://www.gnu.org/copyleft/gpl.html
10  */
11
12 #include <linux/io.h>
13 #include <linux/rtc.h>
14 #include <linux/module.h>
15 #include <linux/slab.h>
16 #include <linux/interrupt.h>
17 #include <linux/platform_device.h>
18 #include <linux/clk.h>
19
20 #include <mach/hardware.h>
21
22 #define RTC_INPUT_CLK_32768HZ   (0x00 << 5)
23 #define RTC_INPUT_CLK_32000HZ   (0x01 << 5)
24 #define RTC_INPUT_CLK_38400HZ   (0x02 << 5)
25
26 #define RTC_SW_BIT      (1 << 0)
27 #define RTC_ALM_BIT     (1 << 2)
28 #define RTC_1HZ_BIT     (1 << 4)
29 #define RTC_2HZ_BIT     (1 << 7)
30 #define RTC_SAM0_BIT    (1 << 8)
31 #define RTC_SAM1_BIT    (1 << 9)
32 #define RTC_SAM2_BIT    (1 << 10)
33 #define RTC_SAM3_BIT    (1 << 11)
34 #define RTC_SAM4_BIT    (1 << 12)
35 #define RTC_SAM5_BIT    (1 << 13)
36 #define RTC_SAM6_BIT    (1 << 14)
37 #define RTC_SAM7_BIT    (1 << 15)
38 #define PIT_ALL_ON      (RTC_2HZ_BIT | RTC_SAM0_BIT | RTC_SAM1_BIT | \
39                          RTC_SAM2_BIT | RTC_SAM3_BIT | RTC_SAM4_BIT | \
40                          RTC_SAM5_BIT | RTC_SAM6_BIT | RTC_SAM7_BIT)
41
42 #define RTC_ENABLE_BIT  (1 << 7)
43
44 #define MAX_PIE_NUM     9
45 #define MAX_PIE_FREQ    512
46 static const u32 PIE_BIT_DEF[MAX_PIE_NUM][2] = {
47         { 2,            RTC_2HZ_BIT },
48         { 4,            RTC_SAM0_BIT },
49         { 8,            RTC_SAM1_BIT },
50         { 16,           RTC_SAM2_BIT },
51         { 32,           RTC_SAM3_BIT },
52         { 64,           RTC_SAM4_BIT },
53         { 128,          RTC_SAM5_BIT },
54         { 256,          RTC_SAM6_BIT },
55         { MAX_PIE_FREQ, RTC_SAM7_BIT },
56 };
57
58 #define MXC_RTC_TIME    0
59 #define MXC_RTC_ALARM   1
60
61 #define RTC_HOURMIN     0x00    /*  32bit rtc hour/min counter reg */
62 #define RTC_SECOND      0x04    /*  32bit rtc seconds counter reg */
63 #define RTC_ALRM_HM     0x08    /*  32bit rtc alarm hour/min reg */
64 #define RTC_ALRM_SEC    0x0C    /*  32bit rtc alarm seconds reg */
65 #define RTC_RTCCTL      0x10    /*  32bit rtc control reg */
66 #define RTC_RTCISR      0x14    /*  32bit rtc interrupt status reg */
67 #define RTC_RTCIENR     0x18    /*  32bit rtc interrupt enable reg */
68 #define RTC_STPWCH      0x1C    /*  32bit rtc stopwatch min reg */
69 #define RTC_DAYR        0x20    /*  32bit rtc days counter reg */
70 #define RTC_DAYALARM    0x24    /*  32bit rtc day alarm reg */
71 #define RTC_TEST1       0x28    /*  32bit rtc test reg 1 */
72 #define RTC_TEST2       0x2C    /*  32bit rtc test reg 2 */
73 #define RTC_TEST3       0x30    /*  32bit rtc test reg 3 */
74
75 struct rtc_plat_data {
76         struct rtc_device *rtc;
77         void __iomem *ioaddr;
78         int irq;
79         struct clk *clk;
80         struct rtc_time g_rtc_alarm;
81 };
82
83 /*
84  * This function is used to obtain the RTC time or the alarm value in
85  * second.
86  */
87 static u32 get_alarm_or_time(struct device *dev, int time_alarm)
88 {
89         struct platform_device *pdev = to_platform_device(dev);
90         struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
91         void __iomem *ioaddr = pdata->ioaddr;
92         u32 day = 0, hr = 0, min = 0, sec = 0, hr_min = 0;
93
94         switch (time_alarm) {
95         case MXC_RTC_TIME:
96                 day = readw(ioaddr + RTC_DAYR);
97                 hr_min = readw(ioaddr + RTC_HOURMIN);
98                 sec = readw(ioaddr + RTC_SECOND);
99                 break;
100         case MXC_RTC_ALARM:
101                 day = readw(ioaddr + RTC_DAYALARM);
102                 hr_min = readw(ioaddr + RTC_ALRM_HM) & 0xffff;
103                 sec = readw(ioaddr + RTC_ALRM_SEC);
104                 break;
105         }
106
107         hr = hr_min >> 8;
108         min = hr_min & 0xff;
109
110         return (((day * 24 + hr) * 60) + min) * 60 + sec;
111 }
112
113 /*
114  * This function sets the RTC alarm value or the time value.
115  */
116 static void set_alarm_or_time(struct device *dev, int time_alarm, u32 time)
117 {
118         u32 day, hr, min, sec, temp;
119         struct platform_device *pdev = to_platform_device(dev);
120         struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
121         void __iomem *ioaddr = pdata->ioaddr;
122
123         day = time / 86400;
124         time -= day * 86400;
125
126         /* time is within a day now */
127         hr = time / 3600;
128         time -= hr * 3600;
129
130         /* time is within an hour now */
131         min = time / 60;
132         sec = time - min * 60;
133
134         temp = (hr << 8) + min;
135
136         switch (time_alarm) {
137         case MXC_RTC_TIME:
138                 writew(day, ioaddr + RTC_DAYR);
139                 writew(sec, ioaddr + RTC_SECOND);
140                 writew(temp, ioaddr + RTC_HOURMIN);
141                 break;
142         case MXC_RTC_ALARM:
143                 writew(day, ioaddr + RTC_DAYALARM);
144                 writew(sec, ioaddr + RTC_ALRM_SEC);
145                 writew(temp, ioaddr + RTC_ALRM_HM);
146                 break;
147         }
148 }
149
150 /*
151  * This function updates the RTC alarm registers and then clears all the
152  * interrupt status bits.
153  */
154 static int rtc_update_alarm(struct device *dev, struct rtc_time *alrm)
155 {
156         struct rtc_time alarm_tm, now_tm;
157         unsigned long now, time;
158         int ret;
159         struct platform_device *pdev = to_platform_device(dev);
160         struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
161         void __iomem *ioaddr = pdata->ioaddr;
162
163         now = get_alarm_or_time(dev, MXC_RTC_TIME);
164         rtc_time_to_tm(now, &now_tm);
165         alarm_tm.tm_year = now_tm.tm_year;
166         alarm_tm.tm_mon = now_tm.tm_mon;
167         alarm_tm.tm_mday = now_tm.tm_mday;
168         alarm_tm.tm_hour = alrm->tm_hour;
169         alarm_tm.tm_min = alrm->tm_min;
170         alarm_tm.tm_sec = alrm->tm_sec;
171         rtc_tm_to_time(&now_tm, &now);
172         rtc_tm_to_time(&alarm_tm, &time);
173
174         if (time < now) {
175                 time += 60 * 60 * 24;
176                 rtc_time_to_tm(time, &alarm_tm);
177         }
178
179         ret = rtc_tm_to_time(&alarm_tm, &time);
180
181         /* clear all the interrupt status bits */
182         writew(readw(ioaddr + RTC_RTCISR), ioaddr + RTC_RTCISR);
183         set_alarm_or_time(dev, MXC_RTC_ALARM, time);
184
185         return ret;
186 }
187
188 /* This function is the RTC interrupt service routine. */
189 static irqreturn_t mxc_rtc_interrupt(int irq, void *dev_id)
190 {
191         struct platform_device *pdev = dev_id;
192         struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
193         void __iomem *ioaddr = pdata->ioaddr;
194         unsigned long flags;
195         u32 status;
196         u32 events = 0;
197
198         spin_lock_irqsave(&pdata->rtc->irq_lock, flags);
199         status = readw(ioaddr + RTC_RTCISR) & readw(ioaddr + RTC_RTCIENR);
200         /* clear interrupt sources */
201         writew(status, ioaddr + RTC_RTCISR);
202
203         /* clear alarm interrupt if it has occurred */
204         if (status & RTC_ALM_BIT)
205                 status &= ~RTC_ALM_BIT;
206
207         /* update irq data & counter */
208         if (status & RTC_ALM_BIT)
209                 events |= (RTC_AF | RTC_IRQF);
210
211         if (status & RTC_1HZ_BIT)
212                 events |= (RTC_UF | RTC_IRQF);
213
214         if (status & PIT_ALL_ON)
215                 events |= (RTC_PF | RTC_IRQF);
216
217         if ((status & RTC_ALM_BIT) && rtc_valid_tm(&pdata->g_rtc_alarm))
218                 rtc_update_alarm(&pdev->dev, &pdata->g_rtc_alarm);
219
220         rtc_update_irq(pdata->rtc, 1, events);
221         spin_unlock_irqrestore(&pdata->rtc->irq_lock, flags);
222
223         return IRQ_HANDLED;
224 }
225
226 /*
227  * Clear all interrupts and release the IRQ
228  */
229 static void mxc_rtc_release(struct device *dev)
230 {
231         struct platform_device *pdev = to_platform_device(dev);
232         struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
233         void __iomem *ioaddr = pdata->ioaddr;
234
235         spin_lock_irq(&pdata->rtc->irq_lock);
236
237         /* Disable all rtc interrupts */
238         writew(0, ioaddr + RTC_RTCIENR);
239
240         /* Clear all interrupt status */
241         writew(0xffffffff, ioaddr + RTC_RTCISR);
242
243         spin_unlock_irq(&pdata->rtc->irq_lock);
244 }
245
246 static void mxc_rtc_irq_enable(struct device *dev, unsigned int bit,
247                                 unsigned int enabled)
248 {
249         struct platform_device *pdev = to_platform_device(dev);
250         struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
251         void __iomem *ioaddr = pdata->ioaddr;
252         u32 reg;
253
254         spin_lock_irq(&pdata->rtc->irq_lock);
255         reg = readw(ioaddr + RTC_RTCIENR);
256
257         if (enabled)
258                 reg |= bit;
259         else
260                 reg &= ~bit;
261
262         writew(reg, ioaddr + RTC_RTCIENR);
263         spin_unlock_irq(&pdata->rtc->irq_lock);
264 }
265
266 static int mxc_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
267 {
268         mxc_rtc_irq_enable(dev, RTC_ALM_BIT, enabled);
269         return 0;
270 }
271
272 /*
273  * This function reads the current RTC time into tm in Gregorian date.
274  */
275 static int mxc_rtc_read_time(struct device *dev, struct rtc_time *tm)
276 {
277         u32 val;
278
279         /* Avoid roll-over from reading the different registers */
280         do {
281                 val = get_alarm_or_time(dev, MXC_RTC_TIME);
282         } while (val != get_alarm_or_time(dev, MXC_RTC_TIME));
283
284         rtc_time_to_tm(val, tm);
285
286         return 0;
287 }
288
289 /*
290  * This function sets the internal RTC time based on tm in Gregorian date.
291  */
292 static int mxc_rtc_set_mmss(struct device *dev, unsigned long time)
293 {
294         /* Avoid roll-over from reading the different registers */
295         do {
296                 set_alarm_or_time(dev, MXC_RTC_TIME, time);
297         } while (time != get_alarm_or_time(dev, MXC_RTC_TIME));
298
299         return 0;
300 }
301
302 /*
303  * This function reads the current alarm value into the passed in 'alrm'
304  * argument. It updates the alrm's pending field value based on the whether
305  * an alarm interrupt occurs or not.
306  */
307 static int mxc_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
308 {
309         struct platform_device *pdev = to_platform_device(dev);
310         struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
311         void __iomem *ioaddr = pdata->ioaddr;
312
313         rtc_time_to_tm(get_alarm_or_time(dev, MXC_RTC_ALARM), &alrm->time);
314         alrm->pending = ((readw(ioaddr + RTC_RTCISR) & RTC_ALM_BIT)) ? 1 : 0;
315
316         return 0;
317 }
318
319 /*
320  * This function sets the RTC alarm based on passed in alrm.
321  */
322 static int mxc_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
323 {
324         struct platform_device *pdev = to_platform_device(dev);
325         struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
326         int ret;
327
328         if (rtc_valid_tm(&alrm->time)) {
329                 if (alrm->time.tm_sec > 59 ||
330                     alrm->time.tm_hour > 23 ||
331                     alrm->time.tm_min > 59)
332                         return -EINVAL;
333
334                 ret = rtc_update_alarm(dev, &alrm->time);
335         } else {
336                 ret = rtc_valid_tm(&alrm->time);
337                 if (ret)
338                         return ret;
339
340                 ret = rtc_update_alarm(dev, &alrm->time);
341         }
342
343         if (ret)
344                 return ret;
345
346         memcpy(&pdata->g_rtc_alarm, &alrm->time, sizeof(struct rtc_time));
347         mxc_rtc_irq_enable(dev, RTC_ALM_BIT, alrm->enabled);
348
349         return 0;
350 }
351
352 /* RTC layer */
353 static struct rtc_class_ops mxc_rtc_ops = {
354         .release                = mxc_rtc_release,
355         .read_time              = mxc_rtc_read_time,
356         .set_mmss               = mxc_rtc_set_mmss,
357         .read_alarm             = mxc_rtc_read_alarm,
358         .set_alarm              = mxc_rtc_set_alarm,
359         .alarm_irq_enable       = mxc_rtc_alarm_irq_enable,
360 };
361
362 static int __init mxc_rtc_probe(struct platform_device *pdev)
363 {
364         struct resource *res;
365         struct rtc_device *rtc;
366         struct rtc_plat_data *pdata = NULL;
367         u32 reg;
368         unsigned long rate;
369         int ret;
370
371         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
372         if (!res)
373                 return -ENODEV;
374
375         pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
376         if (!pdata)
377                 return -ENOMEM;
378
379         if (!devm_request_mem_region(&pdev->dev, res->start,
380                                      resource_size(res), pdev->name))
381                 return -EBUSY;
382
383         pdata->ioaddr = devm_ioremap(&pdev->dev, res->start,
384                                      resource_size(res));
385
386         pdata->clk = clk_get(&pdev->dev, "rtc");
387         if (IS_ERR(pdata->clk)) {
388                 dev_err(&pdev->dev, "unable to get clock!\n");
389                 ret = PTR_ERR(pdata->clk);
390                 goto exit_free_pdata;
391         }
392
393         clk_enable(pdata->clk);
394         rate = clk_get_rate(pdata->clk);
395
396         if (rate == 32768)
397                 reg = RTC_INPUT_CLK_32768HZ;
398         else if (rate == 32000)
399                 reg = RTC_INPUT_CLK_32000HZ;
400         else if (rate == 38400)
401                 reg = RTC_INPUT_CLK_38400HZ;
402         else {
403                 dev_err(&pdev->dev, "rtc clock is not valid (%lu)\n", rate);
404                 ret = -EINVAL;
405                 goto exit_put_clk;
406         }
407
408         reg |= RTC_ENABLE_BIT;
409         writew(reg, (pdata->ioaddr + RTC_RTCCTL));
410         if (((readw(pdata->ioaddr + RTC_RTCCTL)) & RTC_ENABLE_BIT) == 0) {
411                 dev_err(&pdev->dev, "hardware module can't be enabled!\n");
412                 ret = -EIO;
413                 goto exit_put_clk;
414         }
415
416         platform_set_drvdata(pdev, pdata);
417
418         /* Configure and enable the RTC */
419         pdata->irq = platform_get_irq(pdev, 0);
420
421         if (pdata->irq >= 0 &&
422             devm_request_irq(&pdev->dev, pdata->irq, mxc_rtc_interrupt,
423                              IRQF_SHARED, pdev->name, pdev) < 0) {
424                 dev_warn(&pdev->dev, "interrupt not available.\n");
425                 pdata->irq = -1;
426         }
427
428         rtc = rtc_device_register(pdev->name, &pdev->dev, &mxc_rtc_ops,
429                                   THIS_MODULE);
430         if (IS_ERR(rtc)) {
431                 ret = PTR_ERR(rtc);
432                 goto exit_clr_drvdata;
433         }
434
435         pdata->rtc = rtc;
436
437         return 0;
438
439 exit_clr_drvdata:
440         platform_set_drvdata(pdev, NULL);
441 exit_put_clk:
442         clk_disable(pdata->clk);
443         clk_put(pdata->clk);
444
445 exit_free_pdata:
446
447         return ret;
448 }
449
450 static int __exit mxc_rtc_remove(struct platform_device *pdev)
451 {
452         struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
453
454         rtc_device_unregister(pdata->rtc);
455
456         clk_disable(pdata->clk);
457         clk_put(pdata->clk);
458         platform_set_drvdata(pdev, NULL);
459
460         return 0;
461 }
462
463 static struct platform_driver mxc_rtc_driver = {
464         .driver = {
465                    .name        = "mxc_rtc",
466                    .owner       = THIS_MODULE,
467         },
468         .remove         = __exit_p(mxc_rtc_remove),
469 };
470
471 static int __init mxc_rtc_init(void)
472 {
473         return platform_driver_probe(&mxc_rtc_driver, mxc_rtc_probe);
474 }
475
476 static void __exit mxc_rtc_exit(void)
477 {
478         platform_driver_unregister(&mxc_rtc_driver);
479 }
480
481 module_init(mxc_rtc_init);
482 module_exit(mxc_rtc_exit);
483
484 MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>");
485 MODULE_DESCRIPTION("RTC driver for Freescale MXC");
486 MODULE_LICENSE("GPL");
487