drivers/regulator/core.c

   1 /*
   2  * core.c  --  Voltage/Current Regulator framework.
   3  *
   4  * Copyright 2007, 2008 Wolfson Microelectronics PLC.
   5  * Copyright 2008 SlimLogic Ltd.
   6  *
   7  * Author: Liam Girdwood <lrg@slimlogic.co.uk>
   8  *
   9  *  This program is free software; you can redistribute  it and/or modify it
  10  *  under  the terms of  the GNU General  Public License as published by the
  11  *  Free Software Foundation;  either version 2 of the  License, or (at your
  12  *  option) any later version.
  13  *
  14  */
  15
  16 #include <linux/kernel.h>
  17 #include <linux/init.h>
  18 #include <linux/device.h>
  19 #include <linux/slab.h>
  20 #include <linux/err.h>
  21 #include <linux/mutex.h>
  22 #include <linux/suspend.h>
  23 #include <linux/delay.h>
  24 #include <linux/regulator/consumer.h>
  25 #include <linux/regulator/driver.h>
  26 #include <linux/regulator/machine.h>
  27
  28 #include "dummy.h"
  29
  30 #define REGULATOR_VERSION "0.5"
  31
  32 static DEFINE_MUTEX(regulator_list_mutex);
  33 static LIST_HEAD(regulator_list);
  34 static LIST_HEAD(regulator_map_list);
  35 static int has_full_constraints;
  36 static bool board_wants_dummy_regulator;
  37
  38 /*
  39  * struct regulator_map
  40  *
  41  * Used to provide symbolic supply names to devices.
  42  */
  43 struct regulator_map {
  44         struct list_head list;
  45         const char *dev_name;   /* The dev_name() for the consumer */
  46         const char *supply;
  47         struct regulator_dev *regulator;
  48 };
  49
  50 /*
  51  * struct regulator
  52  *
  53  * One for each consumer device.
  54  */
  55 struct regulator {
  56         struct device *dev;
  57         struct list_head list;
  58         int uA_load;
  59         int min_uV;
  60         int max_uV;
  61         char *supply_name;
  62         struct device_attribute dev_attr;
  63         struct regulator_dev *rdev;
  64 };
  65
  66 static int _regulator_is_enabled(struct regulator_dev *rdev);
  67 static int _regulator_disable(struct regulator_dev *rdev,
  68                 struct regulator_dev **supply_rdev_ptr);
  69 static int _regulator_get_voltage(struct regulator_dev *rdev);
  70 static int _regulator_get_current_limit(struct regulator_dev *rdev);
  71 static unsigned int _regulator_get_mode(struct regulator_dev *rdev);
  72 static void _notifier_call_chain(struct regulator_dev *rdev,
  73                                   unsigned long event, void *data);
  74
  75 static const char *rdev_get_name(struct regulator_dev *rdev)
  76 {
  77         if (rdev->constraints && rdev->constraints->name)
  78                 return rdev->constraints->name;
  79         else if (rdev->desc->name)
  80                 return rdev->desc->name;
  81         else
  82                 return "";
  83 }
  84
  85 /* gets the regulator for a given consumer device */
  86 static struct regulator *get_device_regulator(struct device *dev)
  87 {
  88         struct regulator *regulator = NULL;
  89         struct regulator_dev *rdev;
  90
  91         mutex_lock(&regulator_list_mutex);
  92         list_for_each_entry(rdev, &regulator_list, list) {
  93                 mutex_lock(&rdev->mutex);
  94                 list_for_each_entry(regulator, &rdev->consumer_list, list) {
  95                         if (regulator->dev == dev) {
  96                                 mutex_unlock(&rdev->mutex);
  97                                 mutex_unlock(&regulator_list_mutex);
  98                                 return regulator;
  99                         }
 100                 }
 101                 mutex_unlock(&rdev->mutex);
 102         }
 103         mutex_unlock(&regulator_list_mutex);
 104         return NULL;
 105 }
 106
 107 /* Platform voltage constraint check */
 108 static int regulator_check_voltage(struct regulator_dev *rdev,
 109                                    int *min_uV, int *max_uV)
 110 {
 111         BUG_ON(*min_uV > *max_uV);
 112
 113         if (!rdev->constraints) {
 114                 printk(KERN_ERR "%s: no constraints for %s\n", __func__,
 115                        rdev_get_name(rdev));
 116                 return -ENODEV;
 117         }
 118         if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_VOLTAGE)) {
 119                 printk(KERN_ERR "%s: operation not allowed for %s\n",
 120                        __func__, rdev_get_name(rdev));
 121                 return -EPERM;
 122         }
 123
 124         if (*max_uV > rdev->constraints->max_uV)
 125                 *max_uV = rdev->constraints->max_uV;
 126         if (*min_uV < rdev->constraints->min_uV)
 127                 *min_uV = rdev->constraints->min_uV;
 128
 129         if (*min_uV > *max_uV)
 130                 return -EINVAL;
 131
 132         return 0;
 133 }
 134
 135 /* current constraint check */
 136 static int regulator_check_current_limit(struct regulator_dev *rdev,
 137                                         int *min_uA, int *max_uA)
 138 {
 139         BUG_ON(*min_uA > *max_uA);
 140
 141         if (!rdev->constraints) {
 142                 printk(KERN_ERR "%s: no constraints for %s\n", __func__,
 143                        rdev_get_name(rdev));
 144                 return -ENODEV;
 145         }
 146         if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_CURRENT)) {
 147                 printk(KERN_ERR "%s: operation not allowed for %s\n",
 148                        __func__, rdev_get_name(rdev));
 149                 return -EPERM;
 150         }
 151
 152         if (*max_uA > rdev->constraints->max_uA)
 153                 *max_uA = rdev->constraints->max_uA;
 154         if (*min_uA < rdev->constraints->min_uA)
 155                 *min_uA = rdev->constraints->min_uA;
 156
 157         if (*min_uA > *max_uA)
 158                 return -EINVAL;
 159
 160         return 0;
 161 }
 162
 163 /* operating mode constraint check */
 164 static int regulator_check_mode(struct regulator_dev *rdev, int mode)
 165 {
 166         switch (mode) {
 167         case REGULATOR_MODE_FAST:
 168         case REGULATOR_MODE_NORMAL:
 169         case REGULATOR_MODE_IDLE:
 170         case REGULATOR_MODE_STANDBY:
 171                 break;
 172         default:
 173                 return -EINVAL;
 174         }
 175
 176         if (!rdev->constraints) {
 177                 printk(KERN_ERR "%s: no constraints for %s\n", __func__,
 178                        rdev_get_name(rdev));
 179                 return -ENODEV;
 180         }
 181         if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_MODE)) {
 182                 printk(KERN_ERR "%s: operation not allowed for %s\n",
 183                        __func__, rdev_get_name(rdev));
 184                 return -EPERM;
 185         }
 186         if (!(rdev->constraints->valid_modes_mask & mode)) {
 187                 printk(KERN_ERR "%s: invalid mode %x for %s\n",
 188                        __func__, mode, rdev_get_name(rdev));
 189                 return -EINVAL;
 190         }
 191         return 0;
 192 }
 193
 194 /* dynamic regulator mode switching constraint check */
 195 static int regulator_check_drms(struct regulator_dev *rdev)
 196 {
 197         if (!rdev->constraints) {
 198                 printk(KERN_ERR "%s: no constraints for %s\n", __func__,
 199                        rdev_get_name(rdev));
 200                 return -ENODEV;
 201         }
 202         if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_DRMS)) {
 203                 printk(KERN_ERR "%s: operation not allowed for %s\n",
 204                        __func__, rdev_get_name(rdev));
 205                 return -EPERM;
 206         }
 207         return 0;
 208 }
 209
 210 static ssize_t device_requested_uA_show(struct device *dev,
 211                              struct device_attribute *attr, char *buf)
 212 {
 213         struct regulator *regulator;
 214
 215         regulator = get_device_regulator(dev);
 216         if (regulator == NULL)
 217                 return 0;
 218
 219         return sprintf(buf, "%d\n", regulator->uA_load);
 220 }
 221
 222 static ssize_t regulator_uV_show(struct device *dev,
 223                                 struct device_attribute *attr, char *buf)
 224 {
 225         struct regulator_dev *rdev = dev_get_drvdata(dev);
 226         ssize_t ret;
 227
 228         mutex_lock(&rdev->mutex);
 229         ret = sprintf(buf, "%d\n", _regulator_get_voltage(rdev));
 230         mutex_unlock(&rdev->mutex);
 231
 232         return ret;
 233 }
 234 static DEVICE_ATTR(microvolts, 0444, regulator_uV_show, NULL);
 235
 236 static ssize_t regulator_uA_show(struct device *dev,
 237                                 struct device_attribute *attr, char *buf)
 238 {
 239         struct regulator_dev *rdev = dev_get_drvdata(dev);
 240
 241         return sprintf(buf, "%d\n", _regulator_get_current_limit(rdev));
 242 }
 243 static DEVICE_ATTR(microamps, 0444, regulator_uA_show, NULL);
 244
 245 static ssize_t regulator_name_show(struct device *dev,
 246                              struct device_attribute *attr, char *buf)
 247 {
 248         struct regulator_dev *rdev = dev_get_drvdata(dev);
 249
 250         return sprintf(buf, "%s\n", rdev_get_name(rdev));
 251 }
 252
 253 static ssize_t regulator_print_opmode(char *buf, int mode)
 254 {
 255         switch (mode) {
 256         case REGULATOR_MODE_FAST:
 257                 return sprintf(buf, "fast\n");
 258         case REGULATOR_MODE_NORMAL:
 259                 return sprintf(buf, "normal\n");
 260         case REGULATOR_MODE_IDLE:
 261                 return sprintf(buf, "idle\n");
 262         case REGULATOR_MODE_STANDBY:
 263                 return sprintf(buf, "standby\n");
 264         }
 265         return sprintf(buf, "unknown\n");
 266 }
 267
 268 static ssize_t regulator_opmode_show(struct device *dev,
 269                                     struct device_attribute *attr, char *buf)
 270 {
 271         struct regulator_dev *rdev = dev_get_drvdata(dev);
 272
 273         return regulator_print_opmode(buf, _regulator_get_mode(rdev));
 274 }
 275 static DEVICE_ATTR(opmode, 0444, regulator_opmode_show, NULL);
 276
 277 static ssize_t regulator_print_state(char *buf, int state)
 278 {
 279         if (state > 0)
 280                 return sprintf(buf, "enabled\n");
 281         else if (state == 0)
 282                 return sprintf(buf, "disabled\n");
 283         else
 284                 return sprintf(buf, "unknown\n");
 285 }
 286
 287 static ssize_t regulator_state_show(struct device *dev,
 288                                    struct device_attribute *attr, char *buf)
 289 {
 290         struct regulator_dev *rdev = dev_get_drvdata(dev);
 291         ssize_t ret;
 292
 293         mutex_lock(&rdev->mutex);
 294         ret = regulator_print_state(buf, _regulator_is_enabled(rdev));
 295         mutex_unlock(&rdev->mutex);
 296
 297         return ret;
 298 }
 299 static DEVICE_ATTR(state, 0444, regulator_state_show, NULL);
 300
 301 static ssize_t regulator_status_show(struct device *dev,
 302                                    struct device_attribute *attr, char *buf)
 303 {
 304         struct regulator_dev *rdev = dev_get_drvdata(dev);
 305         int status;
 306         char *label;
 307
 308         status = rdev->desc->ops->get_status(rdev);
 309         if (status < 0)
 310                 return status;
 311
 312         switch (status) {
 313         case REGULATOR_STATUS_OFF:
 314                 label = "off";
 315                 break;
 316         case REGULATOR_STATUS_ON:
 317                 label = "on";
 318                 break;
 319         case REGULATOR_STATUS_ERROR:
 320                 label = "error";
 321                 break;
 322         case REGULATOR_STATUS_FAST:
 323                 label = "fast";
 324                 break;
 325         case REGULATOR_STATUS_NORMAL:
 326                 label = "normal";
 327                 break;
 328         case REGULATOR_STATUS_IDLE:
 329                 label = "idle";
 330                 break;
 331         case REGULATOR_STATUS_STANDBY:
 332                 label = "standby";
 333                 break;
 334         default:
 335                 return -ERANGE;
 336         }
 337
 338         return sprintf(buf, "%s\n", label);
 339 }
 340 static DEVICE_ATTR(status, 0444, regulator_status_show, NULL);
 341
 342 static ssize_t regulator_min_uA_show(struct device *dev,
 343                                     struct device_attribute *attr, char *buf)
 344 {
 345         struct regulator_dev *rdev = dev_get_drvdata(dev);
 346
 347         if (!rdev->constraints)
 348                 return sprintf(buf, "constraint not defined\n");
 349
 350         return sprintf(buf, "%d\n", rdev->constraints->min_uA);
 351 }
 352 static DEVICE_ATTR(min_microamps, 0444, regulator_min_uA_show, NULL);
 353
 354 static ssize_t regulator_max_uA_show(struct device *dev,
 355                                     struct device_attribute *attr, char *buf)
 356 {
 357         struct regulator_dev *rdev = dev_get_drvdata(dev);
 358
 359         if (!rdev->constraints)
 360                 return sprintf(buf, "constraint not defined\n");
 361
 362         return sprintf(buf, "%d\n", rdev->constraints->max_uA);
 363 }
 364 static DEVICE_ATTR(max_microamps, 0444, regulator_max_uA_show, NULL);
 365
 366 static ssize_t regulator_min_uV_show(struct device *dev,
 367                                     struct device_attribute *attr, char *buf)
 368 {
 369         struct regulator_dev *rdev = dev_get_drvdata(dev);
 370
 371         if (!rdev->constraints)
 372                 return sprintf(buf, "constraint not defined\n");
 373
 374         return sprintf(buf, "%d\n", rdev->constraints->min_uV);
 375 }
 376 static DEVICE_ATTR(min_microvolts, 0444, regulator_min_uV_show, NULL);
 377
 378 static ssize_t regulator_max_uV_show(struct device *dev,
 379                                     struct device_attribute *attr, char *buf)
 380 {
 381         struct regulator_dev *rdev = dev_get_drvdata(dev);
 382
 383         if (!rdev->constraints)
 384                 return sprintf(buf, "constraint not defined\n");
 385
 386         return sprintf(buf, "%d\n", rdev->constraints->max_uV);
 387 }
 388 static DEVICE_ATTR(max_microvolts, 0444, regulator_max_uV_show, NULL);
 389
 390 static ssize_t regulator_total_uA_show(struct device *dev,
 391                                       struct device_attribute *attr, char *buf)
 392 {
 393         struct regulator_dev *rdev = dev_get_drvdata(dev);
 394         struct regulator *regulator;
 395         int uA = 0;
 396
 397         mutex_lock(&rdev->mutex);
 398         list_for_each_entry(regulator, &rdev->consumer_list, list)
 399                 uA += regulator->uA_load;
 400         mutex_unlock(&rdev->mutex);
 401         return sprintf(buf, "%d\n", uA);
 402 }
 403 static DEVICE_ATTR(requested_microamps, 0444, regulator_total_uA_show, NULL);
 404
 405 static ssize_t regulator_num_users_show(struct device *dev,
 406                                       struct device_attribute *attr, char *buf)
 407 {
 408         struct regulator_dev *rdev = dev_get_drvdata(dev);
 409         return sprintf(buf, "%d\n", rdev->use_count);
 410 }
 411
 412 static ssize_t regulator_type_show(struct device *dev,
 413                                   struct device_attribute *attr, char *buf)
 414 {
 415         struct regulator_dev *rdev = dev_get_drvdata(dev);
 416
 417         switch (rdev->desc->type) {
 418         case REGULATOR_VOLTAGE:
 419                 return sprintf(buf, "voltage\n");
 420         case REGULATOR_CURRENT:
 421                 return sprintf(buf, "current\n");
 422         }
 423         return sprintf(buf, "unknown\n");
 424 }
 425
 426 static ssize_t regulator_suspend_mem_uV_show(struct device *dev,
 427                                 struct device_attribute *attr, char *buf)
 428 {
 429         struct regulator_dev *rdev = dev_get_drvdata(dev);
 430
 431         return sprintf(buf, "%d\n", rdev->constraints->state_mem.uV);
 432 }
 433 static DEVICE_ATTR(suspend_mem_microvolts, 0444,
 434                 regulator_suspend_mem_uV_show, NULL);
 435
 436 static ssize_t regulator_suspend_disk_uV_show(struct device *dev,
 437                                 struct device_attribute *attr, char *buf)
 438 {
 439         struct regulator_dev *rdev = dev_get_drvdata(dev);
 440
 441         return sprintf(buf, "%d\n", rdev->constraints->state_disk.uV);
 442 }
 443 static DEVICE_ATTR(suspend_disk_microvolts, 0444,
 444                 regulator_suspend_disk_uV_show, NULL);
 445
 446 static ssize_t regulator_suspend_standby_uV_show(struct device *dev,
 447                                 struct device_attribute *attr, char *buf)
 448 {
 449         struct regulator_dev *rdev = dev_get_drvdata(dev);
 450
 451         return sprintf(buf, "%d\n", rdev->constraints->state_standby.uV);
 452 }
 453 static DEVICE_ATTR(suspend_standby_microvolts, 0444,
 454                 regulator_suspend_standby_uV_show, NULL);
 455
 456 static ssize_t regulator_suspend_mem_mode_show(struct device *dev,
 457                                 struct device_attribute *attr, char *buf)
 458 {
 459         struct regulator_dev *rdev = dev_get_drvdata(dev);
 460
 461         return regulator_print_opmode(buf,
 462                 rdev->constraints->state_mem.mode);
 463 }
 464 static DEVICE_ATTR(suspend_mem_mode, 0444,
 465                 regulator_suspend_mem_mode_show, NULL);
 466
 467 static ssize_t regulator_suspend_disk_mode_show(struct device *dev,
 468                                 struct device_attribute *attr, char *buf)
 469 {
 470         struct regulator_dev *rdev = dev_get_drvdata(dev);
 471
 472         return regulator_print_opmode(buf,
 473                 rdev->constraints->state_disk.mode);
 474 }
 475 static DEVICE_ATTR(suspend_disk_mode, 0444,
 476                 regulator_suspend_disk_mode_show, NULL);
 477
 478 static ssize_t regulator_suspend_standby_mode_show(struct device *dev,
 479                                 struct device_attribute *attr, char *buf)
 480 {
 481         struct regulator_dev *rdev = dev_get_drvdata(dev);
 482
 483         return regulator_print_opmode(buf,
 484                 rdev->constraints->state_standby.mode);
 485 }
 486 static DEVICE_ATTR(suspend_standby_mode, 0444,
 487                 regulator_suspend_standby_mode_show, NULL);
 488
 489 static ssize_t regulator_suspend_mem_state_show(struct device *dev,
 490                                    struct device_attribute *attr, char *buf)
 491 {
 492         struct regulator_dev *rdev = dev_get_drvdata(dev);
 493
 494         return regulator_print_state(buf,
 495                         rdev->constraints->state_mem.enabled);
 496 }
 497 static DEVICE_ATTR(suspend_mem_state, 0444,
 498                 regulator_suspend_mem_state_show, NULL);
 499
 500 static ssize_t regulator_suspend_disk_state_show(struct device *dev,
 501                                    struct device_attribute *attr, char *buf)
 502 {
 503         struct regulator_dev *rdev = dev_get_drvdata(dev);
 504
 505         return regulator_print_state(buf,
 506                         rdev->constraints->state_disk.enabled);
 507 }
 508 static DEVICE_ATTR(suspend_disk_state, 0444,
 509                 regulator_suspend_disk_state_show, NULL);
 510
 511 static ssize_t regulator_suspend_standby_state_show(struct device *dev,
 512                                    struct device_attribute *attr, char *buf)
 513 {
 514         struct regulator_dev *rdev = dev_get_drvdata(dev);
 515
 516         return regulator_print_state(buf,
 517                         rdev->constraints->state_standby.enabled);
 518 }
 519 static DEVICE_ATTR(suspend_standby_state, 0444,
 520                 regulator_suspend_standby_state_show, NULL);
 521
 522
 523 /*
 524  * These are the only attributes are present for all regulators.
 525  * Other attributes are a function of regulator functionality.
 526  */
 527 static struct device_attribute regulator_dev_attrs[] = {
 528         __ATTR(name, 0444, regulator_name_show, NULL),
 529         __ATTR(num_users, 0444, regulator_num_users_show, NULL),
 530         __ATTR(type, 0444, regulator_type_show, NULL),
 531         __ATTR_NULL,
 532 };
 533
 534 static void regulator_dev_release(struct device *dev)
 535 {
 536         struct regulator_dev *rdev = dev_get_drvdata(dev);
 537         kfree(rdev);
 538 }
 539
 540 static struct class regulator_class = {
 541         .name = "regulator",
 542         .dev_release = regulator_dev_release,
 543         .dev_attrs = regulator_dev_attrs,
 544 };
 545
 546 /* Calculate the new optimum regulator operating mode based on the new total
 547  * consumer load. All locks held by caller */
 548 static void drms_uA_update(struct regulator_dev *rdev)
 549 {
 550         struct regulator *sibling;
 551         int current_uA = 0, output_uV, input_uV, err;
 552         unsigned int mode;
 553
 554         err = regulator_check_drms(rdev);
 555         if (err < 0 || !rdev->desc->ops->get_optimum_mode ||
 556             !rdev->desc->ops->get_voltage || !rdev->desc->ops->set_mode)
 557                 return;
 558
 559         /* get output voltage */
 560         output_uV = rdev->desc->ops->get_voltage(rdev);
 561         if (output_uV <= 0)
 562                 return;
 563
 564         /* get input voltage */
 565         if (rdev->supply && rdev->supply->desc->ops->get_voltage)
 566                 input_uV = rdev->supply->desc->ops->get_voltage(rdev->supply);
 567         else
 568                 input_uV = rdev->constraints->input_uV;
 569         if (input_uV <= 0)
 570                 return;
 571
 572         /* calc total requested load */
 573         list_for_each_entry(sibling, &rdev->consumer_list, list)
 574                 current_uA += sibling->uA_load;
 575
 576         /* now get the optimum mode for our new total regulator load */
 577         mode = rdev->desc->ops->get_optimum_mode(rdev, input_uV,
 578                                                   output_uV, current_uA);
 579
 580         /* check the new mode is allowed */
 581         err = regulator_check_mode(rdev, mode);
 582         if (err == 0)
 583                 rdev->desc->ops->set_mode(rdev, mode);
 584 }
 585
 586 static int suspend_set_state(struct regulator_dev *rdev,
 587         struct regulator_state *rstate)
 588 {
 589         int ret = 0;
 590         bool can_set_state;
 591
 592         can_set_state = rdev->desc->ops->set_suspend_enable &&
 593                 rdev->desc->ops->set_suspend_disable;
 594
 595         /* If we have no suspend mode configration don't set anything;
 596          * only warn if the driver actually makes the suspend mode
 597          * configurable.
 598          */
 599         if (!rstate->enabled && !rstate->disabled) {
 600                 if (can_set_state)
 601                         printk(KERN_WARNING "%s: No configuration for %s\n",
 602                                __func__, rdev_get_name(rdev));
 603                 return 0;
 604         }
 605
 606         if (rstate->enabled && rstate->disabled) {
 607                 printk(KERN_ERR "%s: invalid configuration for %s\n",
 608                        __func__, rdev_get_name(rdev));
 609                 return -EINVAL;
 610         }
 611
 612         if (!can_set_state) {
 613                 printk(KERN_ERR "%s: no way to set suspend state\n",
 614                         __func__);
 615                 return -EINVAL;
 616         }
 617
 618         if (rstate->enabled)
 619                 ret = rdev->desc->ops->set_suspend_enable(rdev);
 620         else
 621                 ret = rdev->desc->ops->set_suspend_disable(rdev);
 622         if (ret < 0) {
 623                 printk(KERN_ERR "%s: failed to enabled/disable\n", __func__);
 624                 return ret;
 625         }
 626
 627         if (rdev->desc->ops->set_suspend_voltage && rstate->uV > 0) {
 628                 ret = rdev->desc->ops->set_suspend_voltage(rdev, rstate->uV);
 629                 if (ret < 0) {
 630                         printk(KERN_ERR "%s: failed to set voltage\n",
 631                                 __func__);
 632                         return ret;
 633                 }
 634         }
 635
 636         if (rdev->desc->ops->set_suspend_mode && rstate->mode > 0) {
 637                 ret = rdev->desc->ops->set_suspend_mode(rdev, rstate->mode);
 638                 if (ret < 0) {
 639                         printk(KERN_ERR "%s: failed to set mode\n", __func__);
 640                         return ret;
 641                 }
 642         }
 643         return ret;
 644 }
 645
 646 /* locks held by caller */
 647 static int suspend_prepare(struct regulator_dev *rdev, suspend_state_t state)
 648 {
 649         if (!rdev->constraints)
 650                 return -EINVAL;
 651
 652         switch (state) {
 653         case PM_SUSPEND_STANDBY:
 654                 return suspend_set_state(rdev,
 655                         &rdev->constraints->state_standby);
 656         case PM_SUSPEND_MEM:
 657                 return suspend_set_state(rdev,
 658                         &rdev->constraints->state_mem);
 659         case PM_SUSPEND_MAX:
 660                 return suspend_set_state(rdev,
 661                         &rdev->constraints->state_disk);
 662         default:
 663                 return -EINVAL;
 664         }
 665 }
 666
 667 static void print_constraints(struct regulator_dev *rdev)
 668 {
 669         struct regulation_constraints *constraints = rdev->constraints;
 670         char buf[80] = "";
 671         int count = 0;
 672         int ret;
 673
 674         if (constraints->min_uV && constraints->max_uV) {
 675                 if (constraints->min_uV == constraints->max_uV)
 676                         count += sprintf(buf + count, "%d mV ",
 677                                          constraints->min_uV / 1000);
 678                 else
 679                         count += sprintf(buf + count, "%d <--> %d mV ",
 680                                          constraints->min_uV / 1000,
 681                                          constraints->max_uV / 1000);
 682         }
 683
 684         if (!constraints->min_uV ||
 685             constraints->min_uV != constraints->max_uV) {
 686                 ret = _regulator_get_voltage(rdev);
 687                 if (ret > 0)
 688                         count += sprintf(buf + count, "at %d mV ", ret / 1000);
 689         }
 690
 691         if (constraints->min_uA && constraints->max_uA) {
 692                 if (constraints->min_uA == constraints->max_uA)
 693                         count += sprintf(buf + count, "%d mA ",
 694                                          constraints->min_uA / 1000);
 695                 else
 696                         count += sprintf(buf + count, "%d <--> %d mA ",
 697                                          constraints->min_uA / 1000,
 698                                          constraints->max_uA / 1000);
 699         }
 700
 701         if (!constraints->min_uA ||
 702             constraints->min_uA != constraints->max_uA) {
 703                 ret = _regulator_get_current_limit(rdev);
 704                 if (ret > 0)
 705                         count += sprintf(buf + count, "at %d mA ", ret / 1000);
 706         }
 707
 708         if (constraints->valid_modes_mask & REGULATOR_MODE_FAST)
 709                 count += sprintf(buf + count, "fast ");
 710         if (constraints->valid_modes_mask & REGULATOR_MODE_NORMAL)
 711                 count += sprintf(buf + count, "normal ");
 712         if (constraints->valid_modes_mask & REGULATOR_MODE_IDLE)
 713                 count += sprintf(buf + count, "idle ");
 714         if (constraints->valid_modes_mask & REGULATOR_MODE_STANDBY)
 715                 count += sprintf(buf + count, "standby");
 716
 717         printk(KERN_INFO "regulator: %s: %s\n", rdev_get_name(rdev), buf);
 718 }
 719
 720 static int machine_constraints_voltage(struct regulator_dev *rdev,
 721         struct regulation_constraints *constraints)
 722 {
 723         struct regulator_ops *ops = rdev->desc->ops;
 724         const char *name = rdev_get_name(rdev);
 725         int ret;
 726
 727         /* do we need to apply the constraint voltage */
 728         if (rdev->constraints->apply_uV &&
 729                 rdev->constraints->min_uV == rdev->constraints->max_uV &&
 730                 ops->set_voltage) {
 731                 ret = ops->set_voltage(rdev,
 732                         rdev->constraints->min_uV, rdev->constraints->max_uV);
 733                         if (ret < 0) {
 734                                 printk(KERN_ERR "%s: failed to apply %duV constraint to %s\n",
 735                                        __func__,
 736                                        rdev->constraints->min_uV, name);
 737                                 rdev->constraints = NULL;
 738                                 return ret;
 739                         }
 740         }
 741
 742         /* constrain machine-level voltage specs to fit
 743          * the actual range supported by this regulator.
 744          */
 745         if (ops->list_voltage && rdev->desc->n_voltages) {
 746                 int     count = rdev->desc->n_voltages;
 747                 int     i;
 748                 int     min_uV = INT_MAX;
 749                 int     max_uV = INT_MIN;
 750                 int     cmin = constraints->min_uV;
 751                 int     cmax = constraints->max_uV;
 752
 753                 /* it's safe to autoconfigure fixed-voltage supplies
 754                    and the constraints are used by list_voltage. */
 755                 if (count == 1 && !cmin) {
 756                         cmin = 1;
 757                         cmax = INT_MAX;
 758                         constraints->min_uV = cmin;
 759                         constraints->max_uV = cmax;
 760                 }
 761
 762                 /* voltage constraints are optional */
 763                 if ((cmin == 0) && (cmax == 0))
 764                         return 0;
 765
 766                 /* else require explicit machine-level constraints */
 767                 if (cmin <= 0 || cmax <= 0 || cmax < cmin) {
 768                         pr_err("%s: %s '%s' voltage constraints\n",
 769                                        __func__, "invalid", name);
 770                         return -EINVAL;
 771                 }
 772
 773                 /* initial: [cmin..cmax] valid, [min_uV..max_uV] not */
 774                 for (i = 0; i < count; i++) {
 775                         int     value;
 776
 777                         value = ops->list_voltage(rdev, i);
 778                         if (value <= 0)
 779                                 continue;
 780
 781                         /* maybe adjust [min_uV..max_uV] */
 782                         if (value >= cmin && value < min_uV)
 783                                 min_uV = value;
 784                         if (value <= cmax && value > max_uV)
 785                                 max_uV = value;
 786                 }
 787
 788                 /* final: [min_uV..max_uV] valid iff constraints valid */
 789                 if (max_uV < min_uV) {
 790                         pr_err("%s: %s '%s' voltage constraints\n",
 791                                        __func__, "unsupportable", name);
 792                         return -EINVAL;
 793                 }
 794
 795                 /* use regulator's subset of machine constraints */
 796                 if (constraints->min_uV < min_uV) {
 797                         pr_debug("%s: override '%s' %s, %d -> %d\n",
 798                                        __func__, name, "min_uV",
 799                                         constraints->min_uV, min_uV);
 800                         constraints->min_uV = min_uV;
 801                 }
 802                 if (constraints->max_uV > max_uV) {
 803                         pr_debug("%s: override '%s' %s, %d -> %d\n",
 804                                        __func__, name, "max_uV",
 805                                         constraints->max_uV, max_uV);
 806                         constraints->max_uV = max_uV;
 807                 }
 808         }
 809
 810         return 0;
 811 }
 812
 813 /**
 814  * set_machine_constraints - sets regulator constraints
 815  * @rdev: regulator source
 816  * @constraints: constraints to apply
 817  *
 818  * Allows platform initialisation code to define and constrain
 819  * regulator circuits e.g. valid voltage/current ranges, etc.  NOTE:
 820  * Constraints *must* be set by platform code in order for some
 821  * regulator operations to proceed i.e. set_voltage, set_current_limit,
 822  * set_mode.
 823  */
 824 static int set_machine_constraints(struct regulator_dev *rdev,
 825         struct regulation_constraints *constraints)
 826 {
 827         int ret = 0;
 828         const char *name;
 829         struct regulator_ops *ops = rdev->desc->ops;
 830
 831         rdev->constraints = constraints;
 832
 833         name = rdev_get_name(rdev);
 834
 835         ret = machine_constraints_voltage(rdev, constraints);
 836         if (ret != 0)
 837                 goto out;
 838
 839         /* do we need to setup our suspend state */
 840         if (constraints->initial_state) {
 841                 ret = suspend_prepare(rdev, constraints->initial_state);
 842                 if (ret < 0) {
 843                         printk(KERN_ERR "%s: failed to set suspend state for %s\n",
 844                                __func__, name);
 845                         rdev->constraints = NULL;
 846                         goto out;
 847                 }
 848         }
 849
 850         if (constraints->initial_mode) {
 851                 if (!ops->set_mode) {
 852                         printk(KERN_ERR "%s: no set_mode operation for %s\n",
 853                                __func__, name);
 854                         ret = -EINVAL;
 855                         goto out;
 856                 }
 857
 858                 ret = ops->set_mode(rdev, constraints->initial_mode);
 859                 if (ret < 0) {
 860                         printk(KERN_ERR
 861                                "%s: failed to set initial mode for %s: %d\n",
 862                                __func__, name, ret);
 863                         goto out;
 864                 }
 865         }
 866
 867         /* If the constraints say the regulator should be on at this point
 868          * and we have control then make sure it is enabled.
 869          */
 870         if ((constraints->always_on || constraints->boot_on) && ops->enable) {
 871                 ret = ops->enable(rdev);
 872                 if (ret < 0) {
 873                         printk(KERN_ERR "%s: failed to enable %s\n",
 874                                __func__, name);
 875                         rdev->constraints = NULL;
 876                         goto out;
 877                 }
 878         }
 879
 880         print_constraints(rdev);
 881 out:
 882         return ret;
 883 }
 884
 885 /**
 886  * set_supply - set regulator supply regulator
 887  * @rdev: regulator name
 888  * @supply_rdev: supply regulator name
 889  *
 890  * Called by platform initialisation code to set the supply regulator for this
 891  * regulator. This ensures that a regulators supply will also be enabled by the
 892  * core if it's child is enabled.
 893  */
 894 static int set_supply(struct regulator_dev *rdev,
 895         struct regulator_dev *supply_rdev)
 896 {
 897         int err;
 898
 899         err = sysfs_create_link(&rdev->dev.kobj, &supply_rdev->dev.kobj,
 900                                 "supply");
 901         if (err) {
 902                 printk(KERN_ERR
 903                        "%s: could not add device link %s err %d\n",
 904                        __func__, supply_rdev->dev.kobj.name, err);
 905                        goto out;
 906         }
 907         rdev->supply = supply_rdev;
 908         list_add(&rdev->slist, &supply_rdev->supply_list);
 909 out:
 910         return err;
 911 }
 912
 913 /**
 914  * set_consumer_device_supply: Bind a regulator to a symbolic supply
 915  * @rdev:         regulator source
 916  * @consumer_dev: device the supply applies to
 917  * @consumer_dev_name: dev_name() string for device supply applies to
 918  * @supply:       symbolic name for supply
 919  *
 920  * Allows platform initialisation code to map physical regulator
 921  * sources to symbolic names for supplies for use by devices.  Devices
 922  * should use these symbolic names to request regulators, avoiding the
 923  * need to provide board-specific regulator names as platform data.
 924  *
 925  * Only one of consumer_dev and consumer_dev_name may be specified.
 926  */
 927 static int set_consumer_device_supply(struct regulator_dev *rdev,
 928         struct device *consumer_dev, const char *consumer_dev_name,
 929         const char *supply)
 930 {
 931         struct regulator_map *node;
 932         int has_dev;
 933
 934         if (consumer_dev && consumer_dev_name)
 935                 return -EINVAL;
 936
 937         if (!consumer_dev_name && consumer_dev)
 938                 consumer_dev_name = dev_name(consumer_dev);
 939
 940         if (supply == NULL)
 941                 return -EINVAL;
 942
 943         if (consumer_dev_name != NULL)
 944                 has_dev = 1;
 945         else
 946                 has_dev = 0;
 947
 948         list_for_each_entry(node, &regulator_map_list, list) {
 949                 if (node->dev_name && consumer_dev_name) {
 950                         if (strcmp(node->dev_name, consumer_dev_name) != 0)
 951                                 continue;
 952                 } else if (node->dev_name || consumer_dev_name) {
 953                         continue;
 954                 }
 955
 956                 if (strcmp(node->supply, supply) != 0)
 957                         continue;
 958
 959                 dev_dbg(consumer_dev, "%s/%s is '%s' supply; fail %s/%s\n",
 960                                 dev_name(&node->regulator->dev),
 961                                 node->regulator->desc->name,
 962                                 supply,
 963                                 dev_name(&rdev->dev), rdev_get_name(rdev));
 964                 return -EBUSY;
 965         }
 966
 967         node = kzalloc(sizeof(struct regulator_map), GFP_KERNEL);
 968         if (node == NULL)
 969                 return -ENOMEM;
 970
 971         node->regulator = rdev;
 972         node->supply = supply;
 973
 974         if (has_dev) {
 975                 node->dev_name = kstrdup(consumer_dev_name, GFP_KERNEL);
 976                 if (node->dev_name == NULL) {
 977                         kfree(node);
 978                         return -ENOMEM;
 979                 }
 980         }
 981
 982         list_add(&node->list, &regulator_map_list);
 983         return 0;
 984 }
 985
 986 static void unset_regulator_supplies(struct regulator_dev *rdev)
 987 {
 988         struct regulator_map *node, *n;
 989
 990         list_for_each_entry_safe(node, n, &regulator_map_list, list) {
 991                 if (rdev == node->regulator) {
 992                         list_del(&node->list);
 993                         kfree(node->dev_name);
 994                         kfree(node);
 995                 }
 996         }
 997 }
 998
 999 #define REG_STR_SIZE    32
1000
1001 static struct regulator *create_regulator(struct regulator_dev *rdev,
1002                                           struct device *dev,
1003                                           const char *supply_name)
1004 {
1005         struct regulator *regulator;
1006         char buf[REG_STR_SIZE];
1007         int err, size;
1008
1009         regulator = kzalloc(sizeof(*regulator), GFP_KERNEL);
1010         if (regulator == NULL)
1011                 return NULL;
1012
1013         mutex_lock(&rdev->mutex);
1014         regulator->rdev = rdev;
1015         list_add(&regulator->list, &rdev->consumer_list);
1016
1017         if (dev) {
1018                 /* create a 'requested_microamps_name' sysfs entry */
1019                 size = scnprintf(buf, REG_STR_SIZE, "microamps_requested_%s",
1020                         supply_name);
1021                 if (size >= REG_STR_SIZE)
1022                         goto overflow_err;
1023
1024                 regulator->dev = dev;
1025                 sysfs_attr_init(&regulator->dev_attr.attr);
1026                 regulator->dev_attr.attr.name = kstrdup(buf, GFP_KERNEL);
1027                 if (regulator->dev_attr.attr.name == NULL)
1028                         goto attr_name_err;
1029
1030                 regulator->dev_attr.attr.mode = 0444;
1031                 regulator->dev_attr.show = device_requested_uA_show;
1032                 err = device_create_file(dev, &regulator->dev_attr);
1033                 if (err < 0) {
1034                         printk(KERN_WARNING "%s: could not add regulator_dev"
1035                                 " load sysfs\n", __func__);
1036                         goto attr_name_err;
1037                 }
1038
1039                 /* also add a link to the device sysfs entry */
1040                 size = scnprintf(buf, REG_STR_SIZE, "%s-%s",
1041                                  dev->kobj.name, supply_name);
1042                 if (size >= REG_STR_SIZE)
1043                         goto attr_err;
1044
1045                 regulator->supply_name = kstrdup(buf, GFP_KERNEL);
1046                 if (regulator->supply_name == NULL)
1047                         goto attr_err;
1048
1049                 err = sysfs_create_link(&rdev->dev.kobj, &dev->kobj,
1050                                         buf);
1051                 if (err) {
1052                         printk(KERN_WARNING
1053                                "%s: could not add device link %s err %d\n",
1054                                __func__, dev->kobj.name, err);
1055                         device_remove_file(dev, &regulator->dev_attr);
1056                         goto link_name_err;
1057                 }
1058         }
1059         mutex_unlock(&rdev->mutex);
1060         return regulator;
1061 link_name_err:
1062         kfree(regulator->supply_name);
1063 attr_err:
1064         device_remove_file(regulator->dev, &regulator->dev_attr);
1065 attr_name_err:
1066         kfree(regulator->dev_attr.attr.name);
1067 overflow_err:
1068         list_del(&regulator->list);
1069         kfree(regulator);
1070         mutex_unlock(&rdev->mutex);
1071         return NULL;
1072 }
1073
1074 static int _regulator_get_enable_time(struct regulator_dev *rdev)
1075 {
1076         if (!rdev->desc->ops->enable_time)
1077                 return 0;
1078         return rdev->desc->ops->enable_time(rdev);
1079 }
1080
1081 /* Internal regulator request function */
1082 static struct regulator *_regulator_get(struct device *dev, const char *id,
1083                                         int exclusive)
1084 {
1085         struct regulator_dev *rdev;
1086         struct regulator_map *map;
1087         struct regulator *regulator = ERR_PTR(-ENODEV);
1088         const char *devname = NULL;
1089         int ret;
1090
1091         if (id == NULL) {
1092                 printk(KERN_ERR "regulator: get() with no identifier\n");
1093                 return regulator;
1094         }
1095
1096         if (dev)
1097                 devname = dev_name(dev);
1098
1099         mutex_lock(&regulator_list_mutex);
1100
1101         list_for_each_entry(map, &regulator_map_list, list) {
1102                 /* If the mapping has a device set up it must match */
1103                 if (map->dev_name &&
1104                     (!devname || strcmp(map->dev_name, devname)))
1105                         continue;
1106
1107                 if (strcmp(map->supply, id) == 0) {
1108                         rdev = map->regulator;
1109                         goto found;
1110                 }
1111         }
1112
1113         if (board_wants_dummy_regulator) {
1114                 rdev = dummy_regulator_rdev;
1115                 goto found;
1116         }
1117
1118 #ifdef CONFIG_REGULATOR_DUMMY
1119         if (!devname)
1120                 devname = "deviceless";
1121
1122         /* If the board didn't flag that it was fully constrained then
1123          * substitute in a dummy regulator so consumers can continue.
1124          */
1125         if (!has_full_constraints) {
1126                 pr_warning("%s supply %s not found, using dummy regulator\n",
1127                            devname, id);
1128                 rdev = dummy_regulator_rdev;
1129                 goto found;
1130         }
1131 #endif
1132
1133         mutex_unlock(&regulator_list_mutex);
1134         return regulator;
1135
1136 found:
1137         if (rdev->exclusive) {
1138                 regulator = ERR_PTR(-EPERM);
1139                 goto out;
1140         }
1141
1142         if (exclusive && rdev->open_count) {
1143                 regulator = ERR_PTR(-EBUSY);
1144                 goto out;
1145         }
1146
1147         if (!try_module_get(rdev->owner))
1148                 goto out;
1149
1150         regulator = create_regulator(rdev, dev, id);
1151         if (regulator == NULL) {
1152                 regulator = ERR_PTR(-ENOMEM);
1153                 module_put(rdev->owner);
1154         }
1155
1156         rdev->open_count++;
1157         if (exclusive) {
1158                 rdev->exclusive = 1;
1159
1160                 ret = _regulator_is_enabled(rdev);
1161                 if (ret > 0)
1162                         rdev->use_count = 1;
1163                 else
1164                         rdev->use_count = 0;
1165         }
1166
1167 out:
1168         mutex_unlock(&regulator_list_mutex);
1169
1170         return regulator;
1171 }
1172
1173 /**
1174  * regulator_get - lookup and obtain a reference to a regulator.
1175  * @dev: device for regulator "consumer"
1176  * @id: Supply name or regulator ID.
1177  *
1178  * Returns a struct regulator corresponding to the regulator producer,
1179  * or IS_ERR() condition containing errno.
1180  *
1181  * Use of supply names configured via regulator_set_device_supply() is
1182  * strongly encouraged.  It is recommended that the supply name used
1183  * should match the name used for the supply and/or the relevant
1184  * device pins in the datasheet.
1185  */
1186 struct regulator *regulator_get(struct device *dev, const char *id)
1187 {
1188         return _regulator_get(dev, id, 0);
1189 }
1190 EXPORT_SYMBOL_GPL(regulator_get);
1191
1192 /**
1193  * regulator_get_exclusive - obtain exclusive access to a regulator.
1194  * @dev: device for regulator "consumer"
1195  * @id: Supply name or regulator ID.
1196  *
1197  * Returns a struct regulator corresponding to the regulator producer,
1198  * or IS_ERR() condition containing errno.  Other consumers will be
1199  * unable to obtain this reference is held and the use count for the
1200  * regulator will be initialised to reflect the current state of the
1201  * regulator.
1202  *
1203  * This is intended for use by consumers which cannot tolerate shared
1204  * use of the regulator such as those which need to force the
1205  * regulator off for correct operation of the hardware they are
1206  * controlling.
1207  *
1208  * Use of supply names configured via regulator_set_device_supply() is
1209  * strongly encouraged.  It is recommended that the supply name used
1210  * should match the name used for the supply and/or the relevant
1211  * device pins in the datasheet.
1212  */
1213 struct regulator *regulator_get_exclusive(struct device *dev, const char *id)
1214 {
1215         return _regulator_get(dev, id, 1);
1216 }
1217 EXPORT_SYMBOL_GPL(regulator_get_exclusive);
1218
1219 /**
1220  * regulator_put - "free" the regulator source
1221  * @regulator: regulator source
1222  *
1223  * Note: drivers must ensure that all regulator_enable calls made on this
1224  * regulator source are balanced by regulator_disable calls prior to calling
1225  * this function.
1226  */
1227 void regulator_put(struct regulator *regulator)
1228 {
1229         struct regulator_dev *rdev;
1230
1231         if (regulator == NULL || IS_ERR(regulator))
1232                 return;
1233
1234         mutex_lock(&regulator_list_mutex);
1235         rdev = regulator->rdev;
1236
1237         /* remove any sysfs entries */
1238         if (regulator->dev) {
1239                 sysfs_remove_link(&rdev->dev.kobj, regulator->supply_name);
1240                 kfree(regulator->supply_name);
1241                 device_remove_file(regulator->dev, &regulator->dev_attr);
1242                 kfree(regulator->dev_attr.attr.name);
1243         }
1244         list_del(&regulator->list);
1245         kfree(regulator);
1246
1247         rdev->open_count--;
1248         rdev->exclusive = 0;
1249
1250         module_put(rdev->owner);
1251         mutex_unlock(&regulator_list_mutex);
1252 }
1253 EXPORT_SYMBOL_GPL(regulator_put);
1254
1255 static int _regulator_can_change_status(struct regulator_dev *rdev)
1256 {
1257         if (!rdev->constraints)
1258                 return 0;
1259
1260         if (rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_STATUS)
1261                 return 1;
1262         else
1263                 return 0;
1264 }
1265
1266 /* locks held by regulator_enable() */
1267 static int _regulator_enable(struct regulator_dev *rdev)
1268 {
1269         int ret, delay;
1270
1271         /* do we need to enable the supply regulator first */
1272         if (rdev->supply) {
1273                 ret = _regulator_enable(rdev->supply);
1274                 if (ret < 0) {
1275                         printk(KERN_ERR "%s: failed to enable %s: %d\n",
1276                                __func__, rdev_get_name(rdev), ret);
1277                         return ret;
1278                 }
1279         }
1280
1281         /* check voltage and requested load before enabling */
1282         if (rdev->constraints &&
1283             (rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_DRMS))
1284                 drms_uA_update(rdev);
1285
1286         if (rdev->use_count == 0) {
1287                 /* The regulator may on if it's not switchable or left on */
1288                 ret = _regulator_is_enabled(rdev);
1289                 if (ret == -EINVAL || ret == 0) {
1290                         if (!_regulator_can_change_status(rdev))
1291                                 return -EPERM;
1292
1293                         if (!rdev->desc->ops->enable)
1294                                 return -EINVAL;
1295
1296                         /* Query before enabling in case configuration
1297                          * dependant.  */
1298                         ret = _regulator_get_enable_time(rdev);
1299                         if (ret >= 0) {
1300                                 delay = ret;
1301                         } else {
1302                                 printk(KERN_WARNING
1303                                         "%s: enable_time() failed for %s: %d\n",
1304                                         __func__, rdev_get_name(rdev),
1305                                         ret);
1306                                 delay = 0;
1307                         }
1308
1309                         /* Allow the regulator to ramp; it would be useful
1310                          * to extend this for bulk operations so that the
1311                          * regulators can ramp together.  */
1312                         ret = rdev->desc->ops->enable(rdev);
1313                         if (ret < 0)
1314                                 return ret;
1315
1316                         if (delay >= 1000)
1317                                 mdelay(delay / 1000);
1318                         else if (delay)
1319                                 udelay(delay);
1320
1321                 } else if (ret < 0) {
1322                         printk(KERN_ERR "%s: is_enabled() failed for %s: %d\n",
1323                                __func__, rdev_get_name(rdev), ret);
1324                         return ret;
1325                 }
1326                 /* Fallthrough on positive return values - already enabled */
1327         }
1328
1329         rdev->use_count++;
1330
1331         return 0;
1332 }
1333
1334 /**
1335  * regulator_enable - enable regulator output
1336  * @regulator: regulator source
1337  *
1338  * Request that the regulator be enabled with the regulator output at
1339  * the predefined voltage or current value.  Calls to regulator_enable()
1340  * must be balanced with calls to regulator_disable().
1341  *
1342  * NOTE: the output value can be set by other drivers, boot loader or may be
1343  * hardwired in the regulator.
1344  */
1345 int regulator_enable(struct regulator *regulator)
1346 {
1347         struct regulator_dev *rdev = regulator->rdev;
1348         int ret = 0;
1349
1350         mutex_lock(&rdev->mutex);
1351         ret = _regulator_enable(rdev);
1352         mutex_unlock(&rdev->mutex);
1353         return ret;
1354 }
1355 EXPORT_SYMBOL_GPL(regulator_enable);
1356
1357 /* locks held by regulator_disable() */
1358 static int _regulator_disable(struct regulator_dev *rdev,
1359                 struct regulator_dev **supply_rdev_ptr)
1360 {
1361         int ret = 0;
1362
1363         if (WARN(rdev->use_count <= 0,
1364                         "unbalanced disables for %s\n",
1365                         rdev_get_name(rdev)))
1366                 return -EIO;
1367
1368         /* are we the last user and permitted to disable ? */
1369         if (rdev->use_count == 1 &&
1370             (rdev->constraints && !rdev->constraints->always_on)) {
1371
1372                 /* we are last user */
1373                 if (_regulator_can_change_status(rdev) &&
1374                     rdev->desc->ops->disable) {
1375                         ret = rdev->desc->ops->disable(rdev);
1376                         if (ret < 0) {
1377                                 printk(KERN_ERR "%s: failed to disable %s\n",
1378                                        __func__, rdev_get_name(rdev));
1379                                 return ret;
1380                         }
1381
1382                         _notifier_call_chain(rdev, REGULATOR_EVENT_DISABLE,
1383                                              NULL);
1384                 }
1385
1386                 /* decrease our supplies ref count and disable if required */
1387                 *supply_rdev_ptr = rdev->supply;
1388
1389                 rdev->use_count = 0;
1390         } else if (rdev->use_count > 1) {
1391
1392                 if (rdev->constraints &&
1393                         (rdev->constraints->valid_ops_mask &
1394                         REGULATOR_CHANGE_DRMS))
1395                         drms_uA_update(rdev);
1396
1397                 rdev->use_count--;
1398         }
1399         return ret;
1400 }
1401
1402 /**
1403  * regulator_disable - disable regulator output
1404  * @regulator: regulator source
1405  *
1406  * Disable the regulator output voltage or current.  Calls to
1407  * regulator_enable() must be balanced with calls to
1408  * regulator_disable().
1409  *
1410  * NOTE: this will only disable the regulator output if no other consumer
1411  * devices have it enabled, the regulator device supports disabling and
1412  * machine constraints permit this operation.
1413  */
1414 int regulator_disable(struct regulator *regulator)
1415 {
1416         struct regulator_dev *rdev = regulator->rdev;
1417         struct regulator_dev *supply_rdev = NULL;
1418         int ret = 0;
1419
1420         mutex_lock(&rdev->mutex);
1421         ret = _regulator_disable(rdev, &supply_rdev);
1422         mutex_unlock(&rdev->mutex);
1423
1424         /* decrease our supplies ref count and disable if required */
1425         while (supply_rdev != NULL) {
1426                 rdev = supply_rdev;
1427
1428                 mutex_lock(&rdev->mutex);
1429                 _regulator_disable(rdev, &supply_rdev);
1430                 mutex_unlock(&rdev->mutex);
1431         }
1432
1433         return ret;
1434 }
1435 EXPORT_SYMBOL_GPL(regulator_disable);
1436
1437 /* locks held by regulator_force_disable() */
1438 static int _regulator_force_disable(struct regulator_dev *rdev,
1439                 struct regulator_dev **supply_rdev_ptr)
1440 {
1441         int ret = 0;
1442
1443         /* force disable */
1444         if (rdev->desc->ops->disable) {
1445                 /* ah well, who wants to live forever... */
1446                 ret = rdev->desc->ops->disable(rdev);
1447                 if (ret < 0) {
1448                         printk(KERN_ERR "%s: failed to force disable %s\n",
1449                                __func__, rdev_get_name(rdev));
1450                         return ret;
1451                 }
1452                 /* notify other consumers that power has been forced off */
1453                 _notifier_call_chain(rdev, REGULATOR_EVENT_FORCE_DISABLE |
1454                         REGULATOR_EVENT_DISABLE, NULL);
1455         }
1456
1457         /* decrease our supplies ref count and disable if required */
1458         *supply_rdev_ptr = rdev->supply;
1459
1460         rdev->use_count = 0;
1461         return ret;
1462 }
1463
1464 /**
1465  * regulator_force_disable - force disable regulator output
1466  * @regulator: regulator source
1467  *
1468  * Forcibly disable the regulator output voltage or current.
1469  * NOTE: this *will* disable the regulator output even if other consumer
1470  * devices have it enabled. This should be used for situations when device
1471  * damage will likely occur if the regulator is not disabled (e.g. over temp).
1472  */
1473 int regulator_force_disable(struct regulator *regulator)
1474 {
1475         struct regulator_dev *supply_rdev = NULL;
1476         int ret;
1477
1478         mutex_lock(&regulator->rdev->mutex);
1479         regulator->uA_load = 0;
1480         ret = _regulator_force_disable(regulator->rdev, &supply_rdev);
1481         mutex_unlock(&regulator->rdev->mutex);
1482
1483         if (supply_rdev)
1484                 regulator_disable(get_device_regulator(rdev_get_dev(supply_rdev)));
1485
1486         return ret;
1487 }
1488 EXPORT_SYMBOL_GPL(regulator_force_disable);
1489
1490 static int _regulator_is_enabled(struct regulator_dev *rdev)
1491 {
1492         /* If we don't know then assume that the regulator is always on */
1493         if (!rdev->desc->ops->is_enabled)
1494                 return 1;
1495
1496         return rdev->desc->ops->is_enabled(rdev);
1497 }
1498
1499 /**
1500  * regulator_is_enabled - is the regulator output enabled
1501  * @regulator: regulator source
1502  *
1503  * Returns positive if the regulator driver backing the source/client
1504  * has requested that the device be enabled, zero if it hasn't, else a
1505  * negative errno code.
1506  *
1507  * Note that the device backing this regulator handle can have multiple
1508  * users, so it might be enabled even if regulator_enable() was never
1509  * called for this particular source.
1510  */
1511 int regulator_is_enabled(struct regulator *regulator)
1512 {
1513         int ret;
1514
1515         mutex_lock(&regulator->rdev->mutex);
1516         ret = _regulator_is_enabled(regulator->rdev);
1517         mutex_unlock(&regulator->rdev->mutex);
1518
1519         return ret;
1520 }
1521 EXPORT_SYMBOL_GPL(regulator_is_enabled);
1522
1523 /**
1524  * regulator_count_voltages - count regulator_list_voltage() selectors
1525  * @regulator: regulator source
1526  *
1527  * Returns number of selectors, or negative errno.  Selectors are
1528  * numbered starting at zero, and typically correspond to bitfields
1529  * in hardware registers.
1530  */
1531 int regulator_count_voltages(struct regulator *regulator)
1532 {
1533         struct regulator_dev    *rdev = regulator->rdev;
1534
1535         return rdev->desc->n_voltages ? : -EINVAL;
1536 }
1537 EXPORT_SYMBOL_GPL(regulator_count_voltages);
1538
1539 /**
1540  * regulator_list_voltage - enumerate supported voltages
1541  * @regulator: regulator source
1542  * @selector: identify voltage to list
1543  * Context: can sleep
1544  *
1545  * Returns a voltage that can be passed to @regulator_set_voltage(),
1546  * zero if this selector code can't be used on this system, or a
1547  * negative errno.
1548  */
1549 int regulator_list_voltage(struct regulator *regulator, unsigned selector)
1550 {
1551         struct regulator_dev    *rdev = regulator->rdev;
1552         struct regulator_ops    *ops = rdev->desc->ops;
1553         int                     ret;
1554
1555         if (!ops->list_voltage || selector >= rdev->desc->n_voltages)
1556                 return -EINVAL;
1557
1558         mutex_lock(&rdev->mutex);
1559         ret = ops->list_voltage(rdev, selector);
1560         mutex_unlock(&rdev->mutex);
1561
1562         if (ret > 0) {
1563                 if (ret < rdev->constraints->min_uV)
1564                         ret = 0;
1565                 else if (ret > rdev->constraints->max_uV)
1566                         ret = 0;
1567         }
1568
1569         return ret;
1570 }
1571 EXPORT_SYMBOL_GPL(regulator_list_voltage);
1572
1573 /**
1574  * regulator_is_supported_voltage - check if a voltage range can be supported
1575  *
1576  * @regulator: Regulator to check.
1577  * @min_uV: Minimum required voltage in uV.
1578  * @max_uV: Maximum required voltage in uV.
1579  *
1580  * Returns a boolean or a negative error code.
1581  */
1582 int regulator_is_supported_voltage(struct regulator *regulator,
1583                                    int min_uV, int max_uV)
1584 {
1585         int i, voltages, ret;
1586
1587         ret = regulator_count_voltages(regulator);
1588         if (ret < 0)
1589                 return ret;
1590         voltages = ret;
1591
1592         for (i = 0; i < voltages; i++) {
1593                 ret = regulator_list_voltage(regulator, i);
1594
1595                 if (ret >= min_uV && ret <= max_uV)
1596                         return 1;
1597         }
1598
1599         return 0;
1600 }
1601
1602 /**
1603  * regulator_set_voltage - set regulator output voltage
1604  * @regulator: regulator source
1605  * @min_uV: Minimum required voltage in uV
1606  * @max_uV: Maximum acceptable voltage in uV
1607  *
1608  * Sets a voltage regulator to the desired output voltage. This can be set
1609  * during any regulator state. IOW, regulator can be disabled or enabled.
1610  *
1611  * If the regulator is enabled then the voltage will change to the new value
1612  * immediately otherwise if the regulator is disabled the regulator will
1613  * output at the new voltage when enabled.
1614  *
1615  * NOTE: If the regulator is shared between several devices then the lowest
1616  * request voltage that meets the system constraints will be used.
1617  * Regulator system constraints must be set for this regulator before
1618  * calling this function otherwise this call will fail.
1619  */
1620 int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV)
1621 {
1622         struct regulator_dev *rdev = regulator->rdev;
1623         int ret;
1624
1625         mutex_lock(&rdev->mutex);
1626
1627         /* sanity check */
1628         if (!rdev->desc->ops->set_voltage) {
1629                 ret = -EINVAL;
1630                 goto out;
1631         }
1632
1633         /* constraints check */
1634         ret = regulator_check_voltage(rdev, &min_uV, &max_uV);
1635         if (ret < 0)
1636                 goto out;
1637         regulator->min_uV = min_uV;
1638         regulator->max_uV = max_uV;
1639         ret = rdev->desc->ops->set_voltage(rdev, min_uV, max_uV);
1640
1641 out:
1642         _notifier_call_chain(rdev, REGULATOR_EVENT_VOLTAGE_CHANGE, NULL);
1643         mutex_unlock(&rdev->mutex);
1644         return ret;
1645 }
1646 EXPORT_SYMBOL_GPL(regulator_set_voltage);
1647
1648 static int _regulator_get_voltage(struct regulator_dev *rdev)
1649 {
1650         /* sanity check */
1651         if (rdev->desc->ops->get_voltage)
1652                 return rdev->desc->ops->get_voltage(rdev);
1653         else
1654                 return -EINVAL;
1655 }
1656
1657 /**
1658  * regulator_get_voltage - get regulator output voltage
1659  * @regulator: regulator source
1660  *
1661  * This returns the current regulator voltage in uV.
1662  *
1663  * NOTE: If the regulator is disabled it will return the voltage value. This
1664  * function should not be used to determine regulator state.
1665  */
1666 int regulator_get_voltage(struct regulator *regulator)
1667 {
1668         int ret;
1669
1670         mutex_lock(&regulator->rdev->mutex);
1671
1672         ret = _regulator_get_voltage(regulator->rdev);
1673
1674         mutex_unlock(&regulator->rdev->mutex);
1675
1676         return ret;
1677 }
1678 EXPORT_SYMBOL_GPL(regulator_get_voltage);
1679
1680 /**
1681  * regulator_set_current_limit - set regulator output current limit
1682  * @regulator: regulator source
1683  * @min_uA: Minimuum supported current in uA
1684  * @max_uA: Maximum supported current in uA
1685  *
1686  * Sets current sink to the desired output current. This can be set during
1687  * any regulator state. IOW, regulator can be disabled or enabled.
1688  *
1689  * If the regulator is enabled then the current will change to the new value
1690  * immediately otherwise if the regulator is disabled the regulator will
1691  * output at the new current when enabled.
1692  *
1693  * NOTE: Regulator system constraints must be set for this regulator before
1694  * calling this function otherwise this call will fail.
1695  */
1696 int regulator_set_current_limit(struct regulator *regulator,
1697                                int min_uA, int max_uA)
1698 {
1699         struct regulator_dev *rdev = regulator->rdev;
1700         int ret;
1701
1702         mutex_lock(&rdev->mutex);
1703
1704         /* sanity check */
1705         if (!rdev->desc->ops->set_current_limit) {
1706                 ret = -EINVAL;
1707                 goto out;
1708         }
1709
1710         /* constraints check */
1711         ret = regulator_check_current_limit(rdev, &min_uA, &max_uA);
1712         if (ret < 0)
1713                 goto out;
1714
1715         ret = rdev->desc->ops->set_current_limit(rdev, min_uA, max_uA);
1716 out:
1717         mutex_unlock(&rdev->mutex);
1718         return ret;
1719 }
1720 EXPORT_SYMBOL_GPL(regulator_set_current_limit);
1721
1722 static int _regulator_get_current_limit(struct regulator_dev *rdev)
1723 {
1724         int ret;
1725
1726         mutex_lock(&rdev->mutex);
1727
1728         /* sanity check */
1729         if (!rdev->desc->ops->get_current_limit) {
1730                 ret = -EINVAL;
1731                 goto out;
1732         }
1733
1734         ret = rdev->desc->ops->get_current_limit(rdev);
1735 out:
1736         mutex_unlock(&rdev->mutex);
1737         return ret;
1738 }
1739
1740 /**
1741  * regulator_get_current_limit - get regulator output current
1742  * @regulator: regulator source
1743  *
1744  * This returns the current supplied by the specified current sink in uA.
1745  *
1746  * NOTE: If the regulator is disabled it will return the current value. This
1747  * function should not be used to determine regulator state.
1748  */
1749 int regulator_get_current_limit(struct regulator *regulator)
1750 {
1751         return _regulator_get_current_limit(regulator->rdev);
1752 }
1753 EXPORT_SYMBOL_GPL(regulator_get_current_limit);
1754
1755 /**
1756  * regulator_set_mode - set regulator operating mode
1757  * @regulator: regulator source
1758  * @mode: operating mode - one of the REGULATOR_MODE constants
1759  *
1760  * Set regulator operating mode to increase regulator efficiency or improve
1761  * regulation performance.
1762  *
1763  * NOTE: Regulator system constraints must be set for this regulator before
1764  * calling this function otherwise this call will fail.
1765  */
1766 int regulator_set_mode(struct regulator *regulator, unsigned int mode)
1767 {
1768         struct regulator_dev *rdev = regulator->rdev;
1769         int ret;
1770         int regulator_curr_mode;
1771
1772         mutex_lock(&rdev->mutex);
1773
1774         /* sanity check */
1775         if (!rdev->desc->ops->set_mode) {
1776                 ret = -EINVAL;
1777                 goto out;
1778         }
1779
1780         /* return if the same mode is requested */
1781         if (rdev->desc->ops->get_mode) {
1782                 regulator_curr_mode = rdev->desc->ops->get_mode(rdev);
1783                 if (regulator_curr_mode == mode) {
1784                         ret = 0;
1785                         goto out;
1786                 }
1787         }
1788
1789         /* constraints check */
1790         ret = regulator_check_mode(rdev, mode);
1791         if (ret < 0)
1792                 goto out;
1793
1794         ret = rdev->desc->ops->set_mode(rdev, mode);
1795 out:
1796         mutex_unlock(&rdev->mutex);
1797         return ret;
1798 }
1799 EXPORT_SYMBOL_GPL(regulator_set_mode);
1800
1801 static unsigned int _regulator_get_mode(struct regulator_dev *rdev)
1802 {
1803         int ret;
1804
1805         mutex_lock(&rdev->mutex);
1806
1807         /* sanity check */
1808         if (!rdev->desc->ops->get_mode) {
1809                 ret = -EINVAL;
1810                 goto out;
1811         }
1812
1813         ret = rdev->desc->ops->get_mode(rdev);
1814 out:
1815         mutex_unlock(&rdev->mutex);
1816         return ret;
1817 }
1818
1819 /**
1820  * regulator_get_mode - get regulator operating mode
1821  * @regulator: regulator source
1822  *
1823  * Get the current regulator operating mode.
1824  */
1825 unsigned int regulator_get_mode(struct regulator *regulator)
1826 {
1827         return _regulator_get_mode(regulator->rdev);
1828 }
1829 EXPORT_SYMBOL_GPL(regulator_get_mode);
1830
1831 /**
1832  * regulator_set_optimum_mode - set regulator optimum operating mode
1833  * @regulator: regulator source
1834  * @uA_load: load current
1835  *
1836  * Notifies the regulator core of a new device load. This is then used by
1837  * DRMS (if enabled by constraints) to set the most efficient regulator
1838  * operating mode for the new regulator loading.
1839  *
1840  * Consumer devices notify their supply regulator of the maximum power
1841  * they will require (can be taken from device datasheet in the power
1842  * consumption tables) when they change operational status and hence power
1843  * state. Examples of operational state changes that can affect power
1844  * consumption are :-
1845  *
1846  *    o Device is opened / closed.
1847  *    o Device I/O is about to begin or has just finished.
1848  *    o Device is idling in between work.
1849  *
1850  * This information is also exported via sysfs to userspace.
1851  *
1852  * DRMS will sum the total requested load on the regulator and change
1853  * to the most efficient operating mode if platform constraints allow.
1854  *
1855  * Returns the new regulator mode or error.
1856  */
1857 int regulator_set_optimum_mode(struct regulator *regulator, int uA_load)
1858 {
1859         struct regulator_dev *rdev = regulator->rdev;
1860         struct regulator *consumer;
1861         int ret, output_uV, input_uV, total_uA_load = 0;
1862         unsigned int mode;
1863
1864         mutex_lock(&rdev->mutex);
1865
1866         regulator->uA_load = uA_load;
1867         ret = regulator_check_drms(rdev);
1868         if (ret < 0)
1869                 goto out;
1870         ret = -EINVAL;
1871
1872         /* sanity check */
1873         if (!rdev->desc->ops->get_optimum_mode)
1874                 goto out;
1875
1876         /* get output voltage */
1877         output_uV = rdev->desc->ops->get_voltage(rdev);
1878         if (output_uV <= 0) {
1879                 printk(KERN_ERR "%s: invalid output voltage found for %s\n",
1880                         __func__, rdev_get_name(rdev));
1881                 goto out;
1882         }
1883
1884         /* get input voltage */
1885         if (rdev->supply && rdev->supply->desc->ops->get_voltage)
1886                 input_uV = rdev->supply->desc->ops->get_voltage(rdev->supply);
1887         else
1888                 input_uV = rdev->constraints->input_uV;
1889         if (input_uV <= 0) {
1890                 printk(KERN_ERR "%s: invalid input voltage found for %s\n",
1891                         __func__, rdev_get_name(rdev));
1892                 goto out;
1893         }
1894
1895         /* calc total requested load for this regulator */
1896         list_for_each_entry(consumer, &rdev->consumer_list, list)
1897                 total_uA_load += consumer->uA_load;
1898
1899         mode = rdev->desc->ops->get_optimum_mode(rdev,
1900                                                  input_uV, output_uV,
1901                                                  total_uA_load);
1902         ret = regulator_check_mode(rdev, mode);
1903         if (ret < 0) {
1904                 printk(KERN_ERR "%s: failed to get optimum mode for %s @"
1905                         " %d uA %d -> %d uV\n", __func__, rdev_get_name(rdev),
1906                         total_uA_load, input_uV, output_uV);
1907                 goto out;
1908         }
1909
1910         ret = rdev->desc->ops->set_mode(rdev, mode);
1911         if (ret < 0) {
1912                 printk(KERN_ERR "%s: failed to set optimum mode %x for %s\n",
1913                         __func__, mode, rdev_get_name(rdev));
1914                 goto out;
1915         }
1916         ret = mode;
1917 out:
1918         mutex_unlock(&rdev->mutex);
1919         return ret;
1920 }
1921 EXPORT_SYMBOL_GPL(regulator_set_optimum_mode);
1922
1923 /**
1924  * regulator_register_notifier - register regulator event notifier
1925  * @regulator: regulator source
1926  * @nb: notifier block
1927  *
1928  * Register notifier block to receive regulator events.
1929  */
1930 int regulator_register_notifier(struct regulator *regulator,
1931                               struct notifier_block *nb)
1932 {
1933         return blocking_notifier_chain_register(&regulator->rdev->notifier,
1934                                                 nb);
1935 }
1936 EXPORT_SYMBOL_GPL(regulator_register_notifier);
1937
1938 /**
1939  * regulator_unregister_notifier - unregister regulator event notifier
1940  * @regulator: regulator source
1941  * @nb: notifier block
1942  *
1943  * Unregister regulator event notifier block.
1944  */
1945 int regulator_unregister_notifier(struct regulator *regulator,
1946                                 struct notifier_block *nb)
1947 {
1948         return blocking_notifier_chain_unregister(&regulator->rdev->notifier,
1949                                                   nb);
1950 }
1951 EXPORT_SYMBOL_GPL(regulator_unregister_notifier);
1952
1953 /* notify regulator consumers and downstream regulator consumers.
1954  * Note mutex must be held by caller.
1955  */
1956 static void _notifier_call_chain(struct regulator_dev *rdev,
1957                                   unsigned long event, void *data)
1958 {
1959         struct regulator_dev *_rdev;
1960
1961         /* call rdev chain first */
1962         blocking_notifier_call_chain(&rdev->notifier, event, NULL);
1963
1964         /* now notify regulator we supply */
1965         list_for_each_entry(_rdev, &rdev->supply_list, slist) {
1966                 mutex_lock(&_rdev->mutex);
1967                 _notifier_call_chain(_rdev, event, data);
1968                 mutex_unlock(&_rdev->mutex);
1969         }
1970 }
1971
1972 /**
1973  * regulator_bulk_get - get multiple regulator consumers
1974  *
1975  * @dev:           Device to supply
1976  * @num_consumers: Number of consumers to register
1977  * @consumers:     Configuration of consumers; clients are stored here.
1978  *
1979  * @return 0 on success, an errno on failure.
1980  *
1981  * This helper function allows drivers to get several regulator
1982  * consumers in one operation.  If any of the regulators cannot be
1983  * acquired then any regulators that were allocated will be freed
1984  * before returning to the caller.
1985  */
1986 int regulator_bulk_get(struct device *dev, int num_consumers,
1987                        struct regulator_bulk_data *consumers)
1988 {
1989         int i;
1990         int ret;
1991
1992         for (i = 0; i < num_consumers; i++)
1993                 consumers[i].consumer = NULL;
1994
1995         for (i = 0; i < num_consumers; i++) {
1996                 consumers[i].consumer = regulator_get(dev,
1997                                                       consumers[i].supply);
1998                 if (IS_ERR(consumers[i].consumer)) {
1999                         ret = PTR_ERR(consumers[i].consumer);
2000                         dev_err(dev, "Failed to get supply '%s': %d\n",
2001                                 consumers[i].supply, ret);
2002                         consumers[i].consumer = NULL;
2003                         goto err;
2004                 }
2005         }
2006
2007         return 0;
2008
2009 err:
2010         for (i = 0; i < num_consumers && consumers[i].consumer; i++)
2011                 regulator_put(consumers[i].consumer);
2012
2013         return ret;
2014 }
2015 EXPORT_SYMBOL_GPL(regulator_bulk_get);
2016
2017 /**
2018  * regulator_bulk_enable - enable multiple regulator consumers
2019  *
2020  * @num_consumers: Number of consumers
2021  * @consumers:     Consumer data; clients are stored here.
2022  * @return         0 on success, an errno on failure
2023  *
2024  * This convenience API allows consumers to enable multiple regulator
2025  * clients in a single API call.  If any consumers cannot be enabled
2026  * then any others that were enabled will be disabled again prior to
2027  * return.
2028  */
2029 int regulator_bulk_enable(int num_consumers,
2030                           struct regulator_bulk_data *consumers)
2031 {
2032         int i;
2033         int ret;
2034
2035         for (i = 0; i < num_consumers; i++) {
2036                 ret = regulator_enable(consumers[i].consumer);
2037                 if (ret != 0)
2038                         goto err;
2039         }
2040
2041         return 0;
2042
2043 err:
2044         printk(KERN_ERR "Failed to enable %s: %d\n", consumers[i].supply, ret);
2045         for (--i; i >= 0; --i)
2046                 regulator_disable(consumers[i].consumer);
2047
2048         return ret;
2049 }
2050 EXPORT_SYMBOL_GPL(regulator_bulk_enable);
2051
2052 /**
2053  * regulator_bulk_disable - disable multiple regulator consumers
2054  *
2055  * @num_consumers: Number of consumers
2056  * @consumers:     Consumer data; clients are stored here.
2057  * @return         0 on success, an errno on failure
2058  *
2059  * This convenience API allows consumers to disable multiple regulator
2060  * clients in a single API call.  If any consumers cannot be enabled
2061  * then any others that were disabled will be disabled again prior to
2062  * return.
2063  */
2064 int regulator_bulk_disable(int num_consumers,
2065                            struct regulator_bulk_data *consumers)
2066 {
2067         int i;
2068         int ret;
2069
2070         for (i = 0; i < num_consumers; i++) {
2071                 ret = regulator_disable(consumers[i].consumer);
2072                 if (ret != 0)
2073                         goto err;
2074         }
2075
2076         return 0;
2077
2078 err:
2079         printk(KERN_ERR "Failed to disable %s: %d\n", consumers[i].supply,
2080                ret);
2081         for (--i; i >= 0; --i)
2082                 regulator_enable(consumers[i].consumer);
2083
2084         return ret;
2085 }
2086 EXPORT_SYMBOL_GPL(regulator_bulk_disable);
2087
2088 /**
2089  * regulator_bulk_free - free multiple regulator consumers
2090  *
2091  * @num_consumers: Number of consumers
2092  * @consumers:     Consumer data; clients are stored here.
2093  *
2094  * This convenience API allows consumers to free multiple regulator
2095  * clients in a single API call.
2096  */
2097 void regulator_bulk_free(int num_consumers,
2098                          struct regulator_bulk_data *consumers)
2099 {
2100         int i;
2101
2102         for (i = 0; i < num_consumers; i++) {
2103                 regulator_put(consumers[i].consumer);
2104                 consumers[i].consumer = NULL;
2105         }
2106 }
2107 EXPORT_SYMBOL_GPL(regulator_bulk_free);
2108
2109 /**
2110  * regulator_notifier_call_chain - call regulator event notifier
2111  * @rdev: regulator source
2112  * @event: notifier block
2113  * @data: callback-specific data.
2114  *
2115  * Called by regulator drivers to notify clients a regulator event has
2116  * occurred. We also notify regulator clients downstream.
2117  * Note lock must be held by caller.
2118  */
2119 int regulator_notifier_call_chain(struct regulator_dev *rdev,
2120                                   unsigned long event, void *data)
2121 {
2122         _notifier_call_chain(rdev, event, data);
2123         return NOTIFY_DONE;
2124
2125 }
2126 EXPORT_SYMBOL_GPL(regulator_notifier_call_chain);
2127
2128 /**
2129  * regulator_mode_to_status - convert a regulator mode into a status
2130  *
2131  * @mode: Mode to convert
2132  *
2133  * Convert a regulator mode into a status.
2134  */
2135 int regulator_mode_to_status(unsigned int mode)
2136 {
2137         switch (mode) {
2138         case REGULATOR_MODE_FAST:
2139                 return REGULATOR_STATUS_FAST;
2140         case REGULATOR_MODE_NORMAL:
2141                 return REGULATOR_STATUS_NORMAL;
2142         case REGULATOR_MODE_IDLE:
2143                 return REGULATOR_STATUS_IDLE;
2144         case REGULATOR_STATUS_STANDBY:
2145                 return REGULATOR_STATUS_STANDBY;
2146         default:
2147                 return 0;
2148         }
2149 }
2150 EXPORT_SYMBOL_GPL(regulator_mode_to_status);
2151
2152 /*
2153  * To avoid cluttering sysfs (and memory) with useless state, only
2154  * create attributes that can be meaningfully displayed.
2155  */
2156 static int add_regulator_attributes(struct regulator_dev *rdev)
2157 {
2158         struct device           *dev = &rdev->dev;
2159         struct regulator_ops    *ops = rdev->desc->ops;
2160         int                     status = 0;
2161
2162         /* some attributes need specific methods to be displayed */
2163         if (ops->get_voltage) {
2164                 status = device_create_file(dev, &dev_attr_microvolts);
2165                 if (status < 0)
2166                         return status;
2167         }
2168         if (ops->get_current_limit) {
2169                 status = device_create_file(dev, &dev_attr_microamps);
2170                 if (status < 0)
2171                         return status;
2172         }
2173         if (ops->get_mode) {
2174                 status = device_create_file(dev, &dev_attr_opmode);
2175                 if (status < 0)
2176                         return status;
2177         }
2178         if (ops->is_enabled) {
2179                 status = device_create_file(dev, &dev_attr_state);
2180                 if (status < 0)
2181                         return status;
2182         }
2183         if (ops->get_status) {
2184                 status = device_create_file(dev, &dev_attr_status);
2185                 if (status < 0)
2186                         return status;
2187         }
2188
2189         /* some attributes are type-specific */
2190         if (rdev->desc->type == REGULATOR_CURRENT) {
2191                 status = device_create_file(dev, &dev_attr_requested_microamps);
2192                 if (status < 0)
2193                         return status;
2194         }
2195
2196         /* all the other attributes exist to support constraints;
2197          * don't show them if there are no constraints, or if the
2198          * relevant supporting methods are missing.
2199          */
2200         if (!rdev->constraints)
2201                 return status;
2202
2203         /* constraints need specific supporting methods */
2204         if (ops->set_voltage) {
2205                 status = device_create_file(dev, &dev_attr_min_microvolts);
2206                 if (status < 0)
2207                         return status;
2208                 status = device_create_file(dev, &dev_attr_max_microvolts);
2209                 if (status < 0)
2210                         return status;
2211         }
2212         if (ops->set_current_limit) {
2213                 status = device_create_file(dev, &dev_attr_min_microamps);
2214                 if (status < 0)
2215                         return status;
2216                 status = device_create_file(dev, &dev_attr_max_microamps);
2217                 if (status < 0)
2218                         return status;
2219         }
2220
2221         /* suspend mode constraints need multiple supporting methods */
2222         if (!(ops->set_suspend_enable && ops->set_suspend_disable))
2223                 return status;
2224
2225         status = device_create_file(dev, &dev_attr_suspend_standby_state);
2226         if (status < 0)
2227                 return status;
2228         status = device_create_file(dev, &dev_attr_suspend_mem_state);
2229         if (status < 0)
2230                 return status;
2231         status = device_create_file(dev, &dev_attr_suspend_disk_state);
2232         if (status < 0)
2233                 return status;
2234
2235         if (ops->set_suspend_voltage) {
2236                 status = device_create_file(dev,
2237                                 &dev_attr_suspend_standby_microvolts);
2238                 if (status < 0)
2239                         return status;
2240                 status = device_create_file(dev,
2241                                 &dev_attr_suspend_mem_microvolts);
2242                 if (status < 0)
2243                         return status;
2244                 status = device_create_file(dev,
2245                                 &dev_attr_suspend_disk_microvolts);
2246                 if (status < 0)
2247                         return status;
2248         }
2249
2250         if (ops->set_suspend_mode) {
2251                 status = device_create_file(dev,
2252                                 &dev_attr_suspend_standby_mode);
2253                 if (status < 0)
2254                         return status;
2255                 status = device_create_file(dev,
2256                                 &dev_attr_suspend_mem_mode);
2257                 if (status < 0)
2258                         return status;
2259                 status = device_create_file(dev,
2260                                 &dev_attr_suspend_disk_mode);
2261                 if (status < 0)
2262                         return status;
2263         }
2264
2265         return status;
2266 }
2267
2268 /**
2269  * regulator_register - register regulator
2270  * @regulator_desc: regulator to register
2271  * @dev: struct device for the regulator
2272  * @init_data: platform provided init data, passed through by driver
2273  * @driver_data: private regulator data
2274  *
2275  * Called by regulator drivers to register a regulator.
2276  * Returns 0 on success.
2277  */
2278 struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc,
2279         struct device *dev, struct regulator_init_data *init_data,
2280         void *driver_data)
2281 {
2282         static atomic_t regulator_no = ATOMIC_INIT(0);
2283         struct regulator_dev *rdev;
2284         int ret, i;
2285
2286         if (regulator_desc == NULL)
2287                 return ERR_PTR(-EINVAL);
2288
2289         if (regulator_desc->name == NULL || regulator_desc->ops == NULL)
2290                 return ERR_PTR(-EINVAL);
2291
2292         if (regulator_desc->type != REGULATOR_VOLTAGE &&
2293             regulator_desc->type != REGULATOR_CURRENT)
2294                 return ERR_PTR(-EINVAL);
2295
2296         if (!init_data)
2297                 return ERR_PTR(-EINVAL);
2298
2299         rdev = kzalloc(sizeof(struct regulator_dev), GFP_KERNEL);
2300         if (rdev == NULL)
2301                 return ERR_PTR(-ENOMEM);
2302
2303         mutex_lock(&regulator_list_mutex);
2304
2305         mutex_init(&rdev->mutex);
2306         rdev->reg_data = driver_data;
2307         rdev->owner = regulator_desc->owner;
2308         rdev->desc = regulator_desc;
2309         INIT_LIST_HEAD(&rdev->consumer_list);
2310         INIT_LIST_HEAD(&rdev->supply_list);
2311         INIT_LIST_HEAD(&rdev->list);
2312         INIT_LIST_HEAD(&rdev->slist);
2313         BLOCKING_INIT_NOTIFIER_HEAD(&rdev->notifier);
2314
2315         /* preform any regulator specific init */
2316         if (init_data->regulator_init) {
2317                 ret = init_data->regulator_init(rdev->reg_data);
2318                 if (ret < 0)
2319                         goto clean;
2320         }
2321
2322         /* register with sysfs */
2323         rdev->dev.class = &regulator_class;
2324         rdev->dev.parent = dev;
2325         dev_set_name(&rdev->dev, "regulator.%d",
2326                      atomic_inc_return(&regulator_no) - 1);
2327         ret = device_register(&rdev->dev);
2328         if (ret != 0) {
2329                 put_device(&rdev->dev);
2330                 goto clean;
2331         }
2332
2333         dev_set_drvdata(&rdev->dev, rdev);
2334
2335         /* set regulator constraints */
2336         ret = set_machine_constraints(rdev, &init_data->constraints);
2337         if (ret < 0)
2338                 goto scrub;
2339
2340         /* add attributes supported by this regulator */
2341         ret = add_regulator_attributes(rdev);
2342         if (ret < 0)
2343                 goto scrub;
2344
2345         /* set supply regulator if it exists */
2346         if (init_data->supply_regulator && init_data->supply_regulator_dev) {
2347                 dev_err(dev,
2348                         "Supply regulator specified by both name and dev\n");
2349                 goto scrub;
2350         }
2351
2352         if (init_data->supply_regulator) {
2353                 struct regulator_dev *r;
2354                 int found = 0;
2355
2356                 list_for_each_entry(r, &regulator_list, list) {
2357                         if (strcmp(rdev_get_name(r),
2358                                    init_data->supply_regulator) == 0) {
2359                                 found = 1;
2360                                 break;
2361                         }
2362                 }
2363
2364                 if (!found) {
2365                         dev_err(dev, "Failed to find supply %s\n",
2366                                 init_data->supply_regulator);
2367                         goto scrub;
2368                 }
2369
2370                 ret = set_supply(rdev, r);
2371                 if (ret < 0)
2372                         goto scrub;
2373         }
2374
2375         if (init_data->supply_regulator_dev) {
2376                 dev_warn(dev, "Uses supply_regulator_dev instead of regulator_supply\n");
2377                 ret = set_supply(rdev,
2378                         dev_get_drvdata(init_data->supply_regulator_dev));
2379                 if (ret < 0)
2380                         goto scrub;
2381         }
2382
2383         /* add consumers devices */
2384         for (i = 0; i < init_data->num_consumer_supplies; i++) {
2385                 ret = set_consumer_device_supply(rdev,
2386                         init_data->consumer_supplies[i].dev,
2387                         init_data->consumer_supplies[i].dev_name,
2388                         init_data->consumer_supplies[i].supply);
2389                 if (ret < 0)
2390                         goto unset_supplies;
2391         }
2392
2393         list_add(&rdev->list, &regulator_list);
2394 out:
2395         mutex_unlock(&regulator_list_mutex);
2396         return rdev;
2397
2398 unset_supplies:
2399         unset_regulator_supplies(rdev);
2400
2401 scrub:
2402         device_unregister(&rdev->dev);
2403         /* device core frees rdev */
2404         rdev = ERR_PTR(ret);
2405         goto out;
2406
2407 clean:
2408         kfree(rdev);
2409         rdev = ERR_PTR(ret);
2410         goto out;
2411 }
2412 EXPORT_SYMBOL_GPL(regulator_register);
2413
2414 /**
2415  * regulator_unregister - unregister regulator
2416  * @rdev: regulator to unregister
2417  *
2418  * Called by regulator drivers to unregister a regulator.
2419  */
2420 void regulator_unregister(struct regulator_dev *rdev)
2421 {
2422         if (rdev == NULL)
2423                 return;
2424
2425         mutex_lock(&regulator_list_mutex);
2426         WARN_ON(rdev->open_count);
2427         unset_regulator_supplies(rdev);
2428         list_del(&rdev->list);
2429         if (rdev->supply)
2430                 sysfs_remove_link(&rdev->dev.kobj, "supply");
2431         device_unregister(&rdev->dev);
2432         mutex_unlock(&regulator_list_mutex);
2433 }
2434 EXPORT_SYMBOL_GPL(regulator_unregister);
2435
2436 /**
2437  * regulator_suspend_prepare - prepare regulators for system wide suspend
2438  * @state: system suspend state
2439  *
2440  * Configure each regulator with it's suspend operating parameters for state.
2441  * This will usually be called by machine suspend code prior to supending.
2442  */
2443 int regulator_suspend_prepare(suspend_state_t state)
2444 {
2445         struct regulator_dev *rdev;
2446         int ret = 0;
2447
2448         /* ON is handled by regulator active state */
2449         if (state == PM_SUSPEND_ON)
2450                 return -EINVAL;
2451
2452         mutex_lock(&regulator_list_mutex);
2453         list_for_each_entry(rdev, &regulator_list, list) {
2454
2455                 mutex_lock(&rdev->mutex);
2456                 ret = suspend_prepare(rdev, state);
2457                 mutex_unlock(&rdev->mutex);
2458
2459                 if (ret < 0) {
2460                         printk(KERN_ERR "%s: failed to prepare %s\n",
2461                                 __func__, rdev_get_name(rdev));
2462                         goto out;
2463                 }
2464         }
2465 out:
2466         mutex_unlock(&regulator_list_mutex);
2467         return ret;
2468 }
2469 EXPORT_SYMBOL_GPL(regulator_suspend_prepare);
2470
2471 /**
2472  * regulator_has_full_constraints - the system has fully specified constraints
2473  *
2474  * Calling this function will cause the regulator API to disable all
2475  * regulators which have a zero use count and don't have an always_on
2476  * constraint in a late_initcall.
2477  *
2478  * The intention is that this will become the default behaviour in a
2479  * future kernel release so users are encouraged to use this facility
2480  * now.
2481  */
2482 void regulator_has_full_constraints(void)
2483 {
2484         has_full_constraints = 1;
2485 }
2486 EXPORT_SYMBOL_GPL(regulator_has_full_constraints);
2487
2488 /**
2489  * regulator_use_dummy_regulator - Provide a dummy regulator when none is found
2490  *
2491  * Calling this function will cause the regulator API to provide a
2492  * dummy regulator to consumers if no physical regulator is found,
2493  * allowing most consumers to proceed as though a regulator were
2494  * configured.  This allows systems such as those with software
2495  * controllable regulators for the CPU core only to be brought up more
2496  * readily.
2497  */
2498 void regulator_use_dummy_regulator(void)
2499 {
2500         board_wants_dummy_regulator = true;
2501 }
2502 EXPORT_SYMBOL_GPL(regulator_use_dummy_regulator);
2503
2504 /**
2505  * rdev_get_drvdata - get rdev regulator driver data
2506  * @rdev: regulator
2507  *
2508  * Get rdev regulator driver private data. This call can be used in the
2509  * regulator driver context.
2510  */
2511 void *rdev_get_drvdata(struct regulator_dev *rdev)
2512 {
2513         return rdev->reg_data;
2514 }
2515 EXPORT_SYMBOL_GPL(rdev_get_drvdata);
2516
2517 /**
2518  * regulator_get_drvdata - get regulator driver data
2519  * @regulator: regulator
2520  *
2521  * Get regulator driver private data. This call can be used in the consumer
2522  * driver context when non API regulator specific functions need to be called.
2523  */
2524 void *regulator_get_drvdata(struct regulator *regulator)
2525 {
2526         return regulator->rdev->reg_data;
2527 }
2528 EXPORT_SYMBOL_GPL(regulator_get_drvdata);
2529
2530 /**
2531  * regulator_set_drvdata - set regulator driver data
2532  * @regulator: regulator
2533  * @data: data
2534  */
2535 void regulator_set_drvdata(struct regulator *regulator, void *data)
2536 {
2537         regulator->rdev->reg_data = data;
2538 }
2539 EXPORT_SYMBOL_GPL(regulator_set_drvdata);
2540
2541 /**
2542  * regulator_get_id - get regulator ID
2543  * @rdev: regulator
2544  */
2545 int rdev_get_id(struct regulator_dev *rdev)
2546 {
2547         return rdev->desc->id;
2548 }
2549 EXPORT_SYMBOL_GPL(rdev_get_id);
2550
2551 struct device *rdev_get_dev(struct regulator_dev *rdev)
2552 {
2553         return &rdev->dev;
2554 }
2555 EXPORT_SYMBOL_GPL(rdev_get_dev);
2556
2557 void *regulator_get_init_drvdata(struct regulator_init_data *reg_init_data)
2558 {
2559         return reg_init_data->driver_data;
2560 }
2561 EXPORT_SYMBOL_GPL(regulator_get_init_drvdata);
2562
2563 static int __init regulator_init(void)
2564 {
2565         int ret;
2566
2567         printk(KERN_INFO "regulator: core version %s\n", REGULATOR_VERSION);
2568
2569         ret = class_register(&regulator_class);
2570
2571         regulator_dummy_init();
2572
2573         return ret;
2574 }
2575
2576 /* init early to allow our consumers to complete system booting */
2577 core_initcall(regulator_init);
2578
2579 static int __init regulator_init_complete(void)
2580 {
2581         struct regulator_dev *rdev;
2582         struct regulator_ops *ops;
2583         struct regulation_constraints *c;
2584         int enabled, ret;
2585         const char *name;
2586
2587         mutex_lock(&regulator_list_mutex);
2588
2589         /* If we have a full configuration then disable any regulators
2590          * which are not in use or always_on.  This will become the
2591          * default behaviour in the future.
2592          */
2593         list_for_each_entry(rdev, &regulator_list, list) {
2594                 ops = rdev->desc->ops;
2595                 c = rdev->constraints;
2596
2597                 name = rdev_get_name(rdev);
2598
2599                 if (!ops->disable || (c && c->always_on))
2600                         continue;
2601
2602                 mutex_lock(&rdev->mutex);
2603
2604                 if (rdev->use_count)
2605                         goto unlock;
2606
2607                 /* If we can't read the status assume it's on. */
2608                 if (ops->is_enabled)
2609                         enabled = ops->is_enabled(rdev);
2610                 else
2611                         enabled = 1;
2612
2613                 if (!enabled)
2614                         goto unlock;
2615
2616                 if (has_full_constraints) {
2617                         /* We log since this may kill the system if it
2618                          * goes wrong. */
2619                         printk(KERN_INFO "%s: disabling %s\n",
2620                                __func__, name);
2621                         ret = ops->disable(rdev);
2622                         if (ret != 0) {
2623                                 printk(KERN_ERR
2624                                        "%s: couldn't disable %s: %d\n",
2625                                        __func__, name, ret);
2626                         }
2627                 } else {
2628                         /* The intention is that in future we will
2629                          * assume that full constraints are provided
2630                          * so warn even if we aren't going to do
2631                          * anything here.
2632                          */
2633                         printk(KERN_WARNING
2634                                "%s: incomplete constraints, leaving %s on\n",
2635                                __func__, name);
2636                 }
2637
2638 unlock:
2639                 mutex_unlock(&rdev->mutex);
2640         }
2641
2642         mutex_unlock(&regulator_list_mutex);
2643
2644         return 0;
2645 }
2646 late_initcall(regulator_init_complete);