drivers/platform/x86/compal-laptop.c

   1 /*-*-linux-c-*-*/
   2
   3 /*
   4   Copyright (C) 2008 Cezary Jackiewicz <cezary.jackiewicz (at) gmail.com>
   5
   6   based on MSI driver
   7
   8   Copyright (C) 2006 Lennart Poettering <mzxreary (at) 0pointer (dot) de>
   9
  10   This program is free software; you can redistribute it and/or modify
  11   it under the terms of the GNU General Public License as published by
  12   the Free Software Foundation; either version 2 of the License, or
  13   (at your option) any later version.
  14
  15   This program is distributed in the hope that it will be useful, but
  16   WITHOUT ANY WARRANTY; without even the implied warranty of
  17   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  18   General Public License for more details.
  19
  20   You should have received a copy of the GNU General Public License
  21   along with this program; if not, write to the Free Software
  22   Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
  23   02110-1301, USA.
  24  */
  25
  26 /*
  27  * compal-laptop.c - Compal laptop support.
  28  *
  29  * This driver exports a few files in /sys/devices/platform/compal-laptop/:
  30  *   wake_up_XXX   Whether or not we listen to such wake up events (rw)
  31  *
  32  * In addition to these platform device attributes the driver
  33  * registers itself in the Linux backlight control, power_supply, rfkill
  34  * and hwmon subsystem and is available to userspace under:
  35  *
  36  *   /sys/class/backlight/compal-laptop/
  37  *   /sys/class/power_supply/compal-laptop/
  38  *   /sys/class/rfkill/rfkillX/
  39  *   /sys/class/hwmon/hwmonX/
  40  *
  41  * Notes on the power_supply battery interface:
  42  *   - the "minimum" design voltage is *the* design voltage
  43  *   - the ambient temperature is the average battery temperature
  44  *     and the value is an educated guess (see commented code below)
  45  *
  46  *
  47  * This driver might work on other laptops produced by Compal. If you
  48  * want to try it you can pass force=1 as argument to the module which
  49  * will force it to load even when the DMI data doesn't identify the
  50  * laptop as compatible.
  51  *
  52  * Lots of data available at:
  53  * http://service1.marasst.com/Compal/JHL90_91/Service%20Manual/
  54  * JHL90%20service%20manual-Final-0725.pdf
  55  *
  56  *
  57  *
  58  * Support for the Compal JHL90 added by Roald Frederickx
  59  * (roald.frederickx@gmail.com):
  60  * Driver got large revision. Added functionalities: backlight
  61  * power, wake_on_XXX, a hwmon and power_supply interface.
  62  *
  63  * In case this gets merged into the kernel source: I want to dedicate this
  64  * to Kasper Meerts, the awesome guy who showed me Linux and C!
  65  */
  66
  67 /* NOTE: currently the wake_on_XXX, hwmon and power_supply interfaces are
  68  * only enabled on a JHL90 board until it is verified that they work on the
  69  * other boards too.  See the extra_features variable. */
  70
  71 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  72
  73 #include <linux/module.h>
  74 #include <linux/kernel.h>
  75 #include <linux/init.h>
  76 #include <linux/acpi.h>
  77 #include <linux/dmi.h>
  78 #include <linux/backlight.h>
  79 #include <linux/platform_device.h>
  80 #include <linux/rfkill.h>
  81 #include <linux/hwmon.h>
  82 #include <linux/hwmon-sysfs.h>
  83 #include <linux/power_supply.h>
  84 #include <linux/fb.h>
  85
  86
  87 /* ======= */
  88 /* Defines */
  89 /* ======= */
  90 #define DRIVER_NAME "compal-laptop"
  91 #define DRIVER_VERSION  "0.2.7"
  92
  93 #define BACKLIGHT_LEVEL_ADDR            0xB9
  94 #define BACKLIGHT_LEVEL_MAX             7
  95 #define BACKLIGHT_STATE_ADDR            0x59
  96 #define BACKLIGHT_STATE_ON_DATA         0xE1
  97 #define BACKLIGHT_STATE_OFF_DATA        0xE2
  98
  99 #define WAKE_UP_ADDR                    0xA4
 100 #define WAKE_UP_PME                     (1 << 0)
 101 #define WAKE_UP_MODEM                   (1 << 1)
 102 #define WAKE_UP_LAN                     (1 << 2)
 103 #define WAKE_UP_WLAN                    (1 << 4)
 104 #define WAKE_UP_KEY                     (1 << 6)
 105 #define WAKE_UP_MOUSE                   (1 << 7)
 106
 107 #define WIRELESS_ADDR                   0xBB
 108 #define WIRELESS_WLAN                   (1 << 0)
 109 #define WIRELESS_BT                     (1 << 1)
 110 #define WIRELESS_WLAN_EXISTS            (1 << 2)
 111 #define WIRELESS_BT_EXISTS              (1 << 3)
 112 #define WIRELESS_KILLSWITCH             (1 << 4)
 113
 114 #define PWM_ADDRESS                     0x46
 115 #define PWM_DISABLE_ADDR                0x59
 116 #define PWM_DISABLE_DATA                0xA5
 117 #define PWM_ENABLE_ADDR                 0x59
 118 #define PWM_ENABLE_DATA                 0xA8
 119
 120 #define FAN_ADDRESS                     0x46
 121 #define FAN_DATA                        0x81
 122 #define FAN_FULL_ON_CMD                 0x59 /* Doesn't seem to work. Just */
 123 #define FAN_FULL_ON_ENABLE              0x76 /* force the pwm signal to its */
 124 #define FAN_FULL_ON_DISABLE             0x77 /* maximum value instead */
 125
 126 #define TEMP_CPU                        0xB0
 127 #define TEMP_CPU_LOCAL                  0xB1
 128 #define TEMP_CPU_DTS                    0xB5
 129 #define TEMP_NORTHBRIDGE                0xB6
 130 #define TEMP_VGA                        0xB4
 131 #define TEMP_SKIN                       0xB2
 132
 133 #define BAT_MANUFACTURER_NAME_ADDR      0x10
 134 #define BAT_MANUFACTURER_NAME_LEN       9
 135 #define BAT_MODEL_NAME_ADDR             0x19
 136 #define BAT_MODEL_NAME_LEN              6
 137 #define BAT_SERIAL_NUMBER_ADDR          0xC4
 138 #define BAT_SERIAL_NUMBER_LEN           5
 139 #define BAT_CHARGE_NOW                  0xC2
 140 #define BAT_CHARGE_DESIGN               0xCA
 141 #define BAT_VOLTAGE_NOW                 0xC6
 142 #define BAT_VOLTAGE_DESIGN              0xC8
 143 #define BAT_CURRENT_NOW                 0xD0
 144 #define BAT_CURRENT_AVG                 0xD2
 145 #define BAT_POWER                       0xD4
 146 #define BAT_CAPACITY                    0xCE
 147 #define BAT_TEMP                        0xD6
 148 #define BAT_TEMP_AVG                    0xD7
 149 #define BAT_STATUS0                     0xC1
 150 #define BAT_STATUS1                     0xF0
 151 #define BAT_STATUS2                     0xF1
 152 #define BAT_STOP_CHARGE1                0xF2
 153 #define BAT_STOP_CHARGE2                0xF3
 154
 155 #define BAT_S0_DISCHARGE                (1 << 0)
 156 #define BAT_S0_DISCHRG_CRITICAL         (1 << 2)
 157 #define BAT_S0_LOW                      (1 << 3)
 158 #define BAT_S0_CHARGING                 (1 << 1)
 159 #define BAT_S0_AC                       (1 << 7)
 160 #define BAT_S1_EXISTS                   (1 << 0)
 161 #define BAT_S1_FULL                     (1 << 1)
 162 #define BAT_S1_EMPTY                    (1 << 2)
 163 #define BAT_S1_LiION_OR_NiMH            (1 << 7)
 164 #define BAT_S2_LOW_LOW                  (1 << 0)
 165 #define BAT_STOP_CHRG1_BAD_CELL         (1 << 1)
 166 #define BAT_STOP_CHRG1_COMM_FAIL        (1 << 2)
 167 #define BAT_STOP_CHRG1_OVERVOLTAGE      (1 << 6)
 168 #define BAT_STOP_CHRG1_OVERTEMPERATURE  (1 << 7)
 169
 170
 171 /* ======= */
 172 /* Structs */
 173 /* ======= */
 174 struct compal_data{
 175         /* Fan control */
 176         struct device *hwmon_dev;
 177         int pwm_enable; /* 0:full on, 1:set by pwm1, 2:control by moterboard */
 178         unsigned char curr_pwm;
 179
 180         /* Power supply */
 181         struct power_supply psy;
 182         struct power_supply_info psy_info;
 183         char bat_model_name[BAT_MODEL_NAME_LEN + 1];
 184         char bat_manufacturer_name[BAT_MANUFACTURER_NAME_LEN + 1];
 185         char bat_serial_number[BAT_SERIAL_NUMBER_LEN + 1];
 186 };
 187
 188
 189 /* =============== */
 190 /* General globals */
 191 /* =============== */
 192 static int force;
 193 module_param(force, bool, 0);
 194 MODULE_PARM_DESC(force, "Force driver load, ignore DMI data");
 195
 196 /* Support for the wake_on_XXX, hwmon and power_supply interface. Currently
 197  * only gets enabled on a JHL90 board. Might work with the others too */
 198 static bool extra_features;
 199
 200 /* Nasty stuff. For some reason the fan control is very un-linear.  I've
 201  * come up with these values by looping through the possible inputs and
 202  * watching the output of address 0x4F (do an ec_transaction writing 0x33
 203  * into 0x4F and read a few bytes from the output, like so:
 204  *      u8 writeData = 0x33;
 205  *      ec_transaction(0x4F, &writeData, 1, buffer, 32);
 206  * That address is labeled "fan1 table information" in the service manual.
 207  * It should be clear which value in 'buffer' changes). This seems to be
 208  * related to fan speed. It isn't a proper 'realtime' fan speed value
 209  * though, because physically stopping or speeding up the fan doesn't
 210  * change it. It might be the average voltage or current of the pwm output.
 211  * Nevertheless, it is more fine-grained than the actual RPM reading */
 212 static const unsigned char pwm_lookup_table[256] = {
 213         0, 0, 0, 1, 1, 1, 2, 253, 254, 3, 3, 3, 4, 4, 4, 5, 5, 5, 6, 6, 6,
 214         7, 7, 7, 8, 86, 86, 9, 9, 9, 10, 10, 10, 11, 92, 92, 12, 12, 95,
 215         13, 66, 66, 14, 14, 98, 15, 15, 15, 16, 16, 67, 17, 17, 72, 18, 70,
 216         75, 19, 90, 90, 73, 73, 73, 21, 21, 91, 91, 91, 96, 23, 94, 94, 94,
 217         94, 94, 94, 94, 94, 94, 94, 141, 141, 238, 223, 192, 139, 139, 139,
 218         139, 139, 142, 142, 142, 142, 142, 78, 78, 78, 78, 78, 76, 76, 76,
 219         76, 76, 79, 79, 79, 79, 79, 79, 79, 20, 20, 20, 20, 20, 22, 22, 22,
 220         22, 22, 24, 24, 24, 24, 24, 24, 219, 219, 219, 219, 219, 219, 219,
 221         219, 27, 27, 188, 188, 28, 28, 28, 29, 186, 186, 186, 186, 186,
 222         186, 186, 186, 186, 186, 31, 31, 31, 31, 31, 32, 32, 32, 41, 33,
 223         33, 33, 33, 33, 252, 252, 34, 34, 34, 43, 35, 35, 35, 36, 36, 38,
 224         206, 206, 206, 206, 206, 206, 206, 206, 206, 37, 37, 37, 46, 46,
 225         47, 47, 232, 232, 232, 232, 232, 232, 232, 232, 232, 232, 48, 48,
 226         48, 48, 48, 40, 40, 40, 49, 42, 42, 42, 42, 42, 42, 42, 42, 44,
 227         189, 189, 189, 189, 54, 54, 45, 45, 45, 45, 45, 45, 45, 45, 251,
 228         191, 199, 199, 199, 199, 199, 215, 215, 215, 215, 187, 187, 187,
 229         187, 187, 193, 50
 230 };
 231
 232
 233
 234
 235 /* ========================= */
 236 /* Hardware access functions */
 237 /* ========================= */
 238 /* General access */
 239 static u8 ec_read_u8(u8 addr)
 240 {
 241         u8 value;
 242         ec_read(addr, &value);
 243         return value;
 244 }
 245
 246 static s8 ec_read_s8(u8 addr)
 247 {
 248         return (s8)ec_read_u8(addr);
 249 }
 250
 251 static u16 ec_read_u16(u8 addr)
 252 {
 253         int hi, lo;
 254         lo = ec_read_u8(addr);
 255         hi = ec_read_u8(addr + 1);
 256         return (hi << 8) + lo;
 257 }
 258
 259 static s16 ec_read_s16(u8 addr)
 260 {
 261         return (s16) ec_read_u16(addr);
 262 }
 263
 264 static void ec_read_sequence(u8 addr, u8 *buf, int len)
 265 {
 266         int i;
 267         for (i = 0; i < len; i++)
 268                 ec_read(addr + i, buf + i);
 269 }
 270
 271
 272 /* Backlight access */
 273 static int set_backlight_level(int level)
 274 {
 275         if (level < 0 || level > BACKLIGHT_LEVEL_MAX)
 276                 return -EINVAL;
 277
 278         ec_write(BACKLIGHT_LEVEL_ADDR, level);
 279
 280         return 0;
 281 }
 282
 283 static int get_backlight_level(void)
 284 {
 285         return (int) ec_read_u8(BACKLIGHT_LEVEL_ADDR);
 286 }
 287
 288 static void set_backlight_state(bool on)
 289 {
 290         u8 data = on ? BACKLIGHT_STATE_ON_DATA : BACKLIGHT_STATE_OFF_DATA;
 291         ec_transaction(BACKLIGHT_STATE_ADDR, &data, 1, NULL, 0);
 292 }
 293
 294
 295 /* Fan control access */
 296 static void pwm_enable_control(void)
 297 {
 298         unsigned char writeData = PWM_ENABLE_DATA;
 299         ec_transaction(PWM_ENABLE_ADDR, &writeData, 1, NULL, 0);
 300 }
 301
 302 static void pwm_disable_control(void)
 303 {
 304         unsigned char writeData = PWM_DISABLE_DATA;
 305         ec_transaction(PWM_DISABLE_ADDR, &writeData, 1, NULL, 0);
 306 }
 307
 308 static void set_pwm(int pwm)
 309 {
 310         ec_transaction(PWM_ADDRESS, &pwm_lookup_table[pwm], 1, NULL, 0);
 311 }
 312
 313 static int get_fan_rpm(void)
 314 {
 315         u8 value, data = FAN_DATA;
 316         ec_transaction(FAN_ADDRESS, &data, 1, &value, 1);
 317         return 100 * (int)value;
 318 }
 319
 320
 321
 322
 323 /* =================== */
 324 /* Interface functions */
 325 /* =================== */
 326
 327 /* Backlight interface */
 328 static int bl_get_brightness(struct backlight_device *b)
 329 {
 330         return get_backlight_level();
 331 }
 332
 333 static int bl_update_status(struct backlight_device *b)
 334 {
 335         int ret = set_backlight_level(b->props.brightness);
 336         if (ret)
 337                 return ret;
 338
 339         set_backlight_state((b->props.power == FB_BLANK_UNBLANK)
 340                 &&    !(b->props.state & BL_CORE_SUSPENDED)
 341                 &&    !(b->props.state & BL_CORE_FBBLANK));
 342         return 0;
 343 }
 344
 345 static const struct backlight_ops compalbl_ops = {
 346         .get_brightness = bl_get_brightness,
 347         .update_status  = bl_update_status,
 348 };
 349
 350
 351 /* Wireless interface */
 352 static int compal_rfkill_set(void *data, bool blocked)
 353 {
 354         unsigned long radio = (unsigned long) data;
 355         u8 result = ec_read_u8(WIRELESS_ADDR);
 356         u8 value;
 357
 358         if (!blocked)
 359                 value = (u8) (result | radio);
 360         else
 361                 value = (u8) (result & ~radio);
 362         ec_write(WIRELESS_ADDR, value);
 363
 364         return 0;
 365 }
 366
 367 static void compal_rfkill_poll(struct rfkill *rfkill, void *data)
 368 {
 369         u8 result = ec_read_u8(WIRELESS_ADDR);
 370         bool hw_blocked = !(result & WIRELESS_KILLSWITCH);
 371         rfkill_set_hw_state(rfkill, hw_blocked);
 372 }
 373
 374 static const struct rfkill_ops compal_rfkill_ops = {
 375         .poll = compal_rfkill_poll,
 376         .set_block = compal_rfkill_set,
 377 };
 378
 379
 380 /* Wake_up interface */
 381 #define SIMPLE_MASKED_STORE_SHOW(NAME, ADDR, MASK)                      \
 382 static ssize_t NAME##_show(struct device *dev,                          \
 383         struct device_attribute *attr, char *buf)                       \
 384 {                                                                       \
 385         return sprintf(buf, "%d\n", ((ec_read_u8(ADDR) & MASK) != 0));  \
 386 }                                                                       \
 387 static ssize_t NAME##_store(struct device *dev,                         \
 388         struct device_attribute *attr, const char *buf, size_t count)   \
 389 {                                                                       \
 390         int state;                                                      \
 391         u8 old_val = ec_read_u8(ADDR);                                  \
 392         if (sscanf(buf, "%d", &state) != 1 || (state < 0 || state > 1)) \
 393                 return -EINVAL;                                         \
 394         ec_write(ADDR, state ? (old_val | MASK) : (old_val & ~MASK));   \
 395         return count;                                                   \
 396 }
 397
 398 SIMPLE_MASKED_STORE_SHOW(wake_up_pme,   WAKE_UP_ADDR, WAKE_UP_PME)
 399 SIMPLE_MASKED_STORE_SHOW(wake_up_modem, WAKE_UP_ADDR, WAKE_UP_MODEM)
 400 SIMPLE_MASKED_STORE_SHOW(wake_up_lan,   WAKE_UP_ADDR, WAKE_UP_LAN)
 401 SIMPLE_MASKED_STORE_SHOW(wake_up_wlan,  WAKE_UP_ADDR, WAKE_UP_WLAN)
 402 SIMPLE_MASKED_STORE_SHOW(wake_up_key,   WAKE_UP_ADDR, WAKE_UP_KEY)
 403 SIMPLE_MASKED_STORE_SHOW(wake_up_mouse, WAKE_UP_ADDR, WAKE_UP_MOUSE)
 404
 405
 406 /* General hwmon interface */
 407 static ssize_t hwmon_name_show(struct device *dev,
 408                 struct device_attribute *attr, char *buf)
 409 {
 410         return sprintf(buf, "%s\n", DRIVER_NAME);
 411 }
 412
 413
 414 /* Fan control interface */
 415 static ssize_t pwm_enable_show(struct device *dev,
 416                 struct device_attribute *attr, char *buf)
 417 {
 418         struct compal_data *data = dev_get_drvdata(dev);
 419         return sprintf(buf, "%d\n", data->pwm_enable);
 420 }
 421
 422 static ssize_t pwm_enable_store(struct device *dev,
 423                 struct device_attribute *attr, const char *buf, size_t count)
 424 {
 425         struct compal_data *data = dev_get_drvdata(dev);
 426         long val;
 427         int err;
 428         err = strict_strtol(buf, 10, &val);
 429         if (err)
 430                 return err;
 431         if (val < 0)
 432                 return -EINVAL;
 433
 434         data->pwm_enable = val;
 435
 436         switch (val) {
 437         case 0:  /* Full speed */
 438                 pwm_enable_control();
 439                 set_pwm(255);
 440                 break;
 441         case 1:  /* As set by pwm1 */
 442                 pwm_enable_control();
 443                 set_pwm(data->curr_pwm);
 444                 break;
 445         default: /* Control by motherboard */
 446                 pwm_disable_control();
 447                 break;
 448         }
 449
 450         return count;
 451 }
 452
 453 static ssize_t pwm_show(struct device *dev, struct device_attribute *attr,
 454                 char *buf)
 455 {
 456         struct compal_data *data = dev_get_drvdata(dev);
 457         return sprintf(buf, "%hhu\n", data->curr_pwm);
 458 }
 459
 460 static ssize_t pwm_store(struct device *dev, struct device_attribute *attr,
 461                 const char *buf, size_t count)
 462 {
 463         struct compal_data *data = dev_get_drvdata(dev);
 464         long val;
 465         int err;
 466         err = strict_strtol(buf, 10, &val);
 467         if (err)
 468                 return err;
 469         if (val < 0 || val > 255)
 470                 return -EINVAL;
 471
 472         data->curr_pwm = val;
 473
 474         if (data->pwm_enable != 1)
 475                 return count;
 476         set_pwm(val);
 477
 478         return count;
 479 }
 480
 481 static ssize_t fan_show(struct device *dev, struct device_attribute *attr,
 482                 char *buf)
 483 {
 484         return sprintf(buf, "%d\n", get_fan_rpm());
 485 }
 486
 487
 488 /* Temperature interface */
 489 #define TEMPERATURE_SHOW_TEMP_AND_LABEL(POSTFIX, ADDRESS, LABEL)        \
 490 static ssize_t temp_##POSTFIX(struct device *dev,                       \
 491                 struct device_attribute *attr, char *buf)               \
 492 {                                                                       \
 493         return sprintf(buf, "%d\n", 1000 * (int)ec_read_s8(ADDRESS));   \
 494 }                                                                       \
 495 static ssize_t label_##POSTFIX(struct device *dev,                      \
 496                 struct device_attribute *attr, char *buf)               \
 497 {                                                                       \
 498         return sprintf(buf, "%s\n", LABEL);                             \
 499 }
 500
 501 /* Labels as in service guide */
 502 TEMPERATURE_SHOW_TEMP_AND_LABEL(cpu,        TEMP_CPU,        "CPU_TEMP");
 503 TEMPERATURE_SHOW_TEMP_AND_LABEL(cpu_local,  TEMP_CPU_LOCAL,  "CPU_TEMP_LOCAL");
 504 TEMPERATURE_SHOW_TEMP_AND_LABEL(cpu_DTS,    TEMP_CPU_DTS,    "CPU_DTS");
 505 TEMPERATURE_SHOW_TEMP_AND_LABEL(northbridge,TEMP_NORTHBRIDGE,"NorthBridge");
 506 TEMPERATURE_SHOW_TEMP_AND_LABEL(vga,        TEMP_VGA,        "VGA_TEMP");
 507 TEMPERATURE_SHOW_TEMP_AND_LABEL(SKIN,       TEMP_SKIN,       "SKIN_TEMP90");
 508
 509
 510 /* Power supply interface */
 511 static int bat_status(void)
 512 {
 513         u8 status0 = ec_read_u8(BAT_STATUS0);
 514         u8 status1 = ec_read_u8(BAT_STATUS1);
 515
 516         if (status0 & BAT_S0_CHARGING)
 517                 return POWER_SUPPLY_STATUS_CHARGING;
 518         if (status0 & BAT_S0_DISCHARGE)
 519                 return POWER_SUPPLY_STATUS_DISCHARGING;
 520         if (status1 & BAT_S1_FULL)
 521                 return POWER_SUPPLY_STATUS_FULL;
 522         return POWER_SUPPLY_STATUS_NOT_CHARGING;
 523 }
 524
 525 static int bat_health(void)
 526 {
 527         u8 status = ec_read_u8(BAT_STOP_CHARGE1);
 528
 529         if (status & BAT_STOP_CHRG1_OVERTEMPERATURE)
 530                 return POWER_SUPPLY_HEALTH_OVERHEAT;
 531         if (status & BAT_STOP_CHRG1_OVERVOLTAGE)
 532                 return POWER_SUPPLY_HEALTH_OVERVOLTAGE;
 533         if (status & BAT_STOP_CHRG1_BAD_CELL)
 534                 return POWER_SUPPLY_HEALTH_DEAD;
 535         if (status & BAT_STOP_CHRG1_COMM_FAIL)
 536                 return POWER_SUPPLY_HEALTH_UNKNOWN;
 537         return POWER_SUPPLY_HEALTH_GOOD;
 538 }
 539
 540 static int bat_is_present(void)
 541 {
 542         u8 status = ec_read_u8(BAT_STATUS2);
 543         return ((status & BAT_S1_EXISTS) != 0);
 544 }
 545
 546 static int bat_technology(void)
 547 {
 548         u8 status = ec_read_u8(BAT_STATUS1);
 549
 550         if (status & BAT_S1_LiION_OR_NiMH)
 551                 return POWER_SUPPLY_TECHNOLOGY_LION;
 552         return POWER_SUPPLY_TECHNOLOGY_NiMH;
 553 }
 554
 555 static int bat_capacity_level(void)
 556 {
 557         u8 status0 = ec_read_u8(BAT_STATUS0);
 558         u8 status1 = ec_read_u8(BAT_STATUS1);
 559         u8 status2 = ec_read_u8(BAT_STATUS2);
 560
 561         if (status0 & BAT_S0_DISCHRG_CRITICAL
 562                         || status1 & BAT_S1_EMPTY
 563                         || status2 & BAT_S2_LOW_LOW)
 564                 return POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL;
 565         if (status0 & BAT_S0_LOW)
 566                 return POWER_SUPPLY_CAPACITY_LEVEL_LOW;
 567         if (status1 & BAT_S1_FULL)
 568                 return POWER_SUPPLY_CAPACITY_LEVEL_FULL;
 569         return POWER_SUPPLY_CAPACITY_LEVEL_NORMAL;
 570 }
 571
 572 static int bat_get_property(struct power_supply *psy,
 573                                 enum power_supply_property psp,
 574                                 union power_supply_propval *val)
 575 {
 576         struct compal_data *data;
 577         data = container_of(psy, struct compal_data, psy);
 578
 579         switch (psp) {
 580         case POWER_SUPPLY_PROP_STATUS:
 581                 val->intval = bat_status();
 582                 break;
 583         case POWER_SUPPLY_PROP_HEALTH:
 584                 val->intval = bat_health();
 585                 break;
 586         case POWER_SUPPLY_PROP_PRESENT:
 587                 val->intval = bat_is_present();
 588                 break;
 589         case POWER_SUPPLY_PROP_TECHNOLOGY:
 590                 val->intval = bat_technology();
 591                 break;
 592         case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN: /* THE design voltage... */
 593                 val->intval = ec_read_u16(BAT_VOLTAGE_DESIGN) * 1000;
 594                 break;
 595         case POWER_SUPPLY_PROP_VOLTAGE_NOW:
 596                 val->intval = ec_read_u16(BAT_VOLTAGE_NOW) * 1000;
 597                 break;
 598         case POWER_SUPPLY_PROP_CURRENT_NOW:
 599                 val->intval = ec_read_s16(BAT_CURRENT_NOW) * 1000;
 600                 break;
 601         case POWER_SUPPLY_PROP_CURRENT_AVG:
 602                 val->intval = ec_read_s16(BAT_CURRENT_AVG) * 1000;
 603                 break;
 604         case POWER_SUPPLY_PROP_POWER_NOW:
 605                 val->intval = ec_read_u8(BAT_POWER) * 1000000;
 606                 break;
 607         case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
 608                 val->intval = ec_read_u16(BAT_CHARGE_DESIGN) * 1000;
 609                 break;
 610         case POWER_SUPPLY_PROP_CHARGE_NOW:
 611                 val->intval = ec_read_u16(BAT_CHARGE_NOW) * 1000;
 612                 break;
 613         case POWER_SUPPLY_PROP_CAPACITY:
 614                 val->intval = ec_read_u8(BAT_CAPACITY);
 615                 break;
 616         case POWER_SUPPLY_PROP_CAPACITY_LEVEL:
 617                 val->intval = bat_capacity_level();
 618                 break;
 619         /* It smees that BAT_TEMP_AVG is a (2's complement?) value showing
 620          * the number of degrees, whereas BAT_TEMP is somewhat more
 621          * complicated. It looks like this is a negative nember with a
 622          * 100/256 divider and an offset of 222. Both were determined
 623          * experimentally by comparing BAT_TEMP and BAT_TEMP_AVG. */
 624         case POWER_SUPPLY_PROP_TEMP:
 625                 val->intval = ((222 - (int)ec_read_u8(BAT_TEMP)) * 1000) >> 8;
 626                 break;
 627         case POWER_SUPPLY_PROP_TEMP_AMBIENT: /* Ambient, Avg, ... same thing */
 628                 val->intval = ec_read_s8(BAT_TEMP_AVG) * 10;
 629                 break;
 630         /* Neither the model name nor manufacturer name work for me. */
 631         case POWER_SUPPLY_PROP_MODEL_NAME:
 632                 val->strval = data->bat_model_name;
 633                 break;
 634         case POWER_SUPPLY_PROP_MANUFACTURER:
 635                 val->strval = data->bat_manufacturer_name;
 636                 break;
 637         case POWER_SUPPLY_PROP_SERIAL_NUMBER:
 638                 val->strval = data->bat_serial_number;
 639                 break;
 640         default:
 641                 break;
 642         }
 643         return 0;
 644 }
 645
 646
 647
 648
 649
 650 /* ============== */
 651 /* Driver Globals */
 652 /* ============== */
 653 static DEVICE_ATTR(wake_up_pme,
 654                 0644, wake_up_pme_show,         wake_up_pme_store);
 655 static DEVICE_ATTR(wake_up_modem,
 656                 0644, wake_up_modem_show,       wake_up_modem_store);
 657 static DEVICE_ATTR(wake_up_lan,
 658                 0644, wake_up_lan_show, wake_up_lan_store);
 659 static DEVICE_ATTR(wake_up_wlan,
 660                 0644, wake_up_wlan_show,        wake_up_wlan_store);
 661 static DEVICE_ATTR(wake_up_key,
 662                 0644, wake_up_key_show, wake_up_key_store);
 663 static DEVICE_ATTR(wake_up_mouse,
 664                 0644, wake_up_mouse_show,       wake_up_mouse_store);
 665
 666 static SENSOR_DEVICE_ATTR(name,        S_IRUGO, hwmon_name_show,   NULL, 1);
 667 static SENSOR_DEVICE_ATTR(fan1_input,  S_IRUGO, fan_show,          NULL, 1);
 668 static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, temp_cpu,          NULL, 1);
 669 static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, temp_cpu_local,    NULL, 1);
 670 static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, temp_cpu_DTS,      NULL, 1);
 671 static SENSOR_DEVICE_ATTR(temp4_input, S_IRUGO, temp_northbridge,  NULL, 1);
 672 static SENSOR_DEVICE_ATTR(temp5_input, S_IRUGO, temp_vga,          NULL, 1);
 673 static SENSOR_DEVICE_ATTR(temp6_input, S_IRUGO, temp_SKIN,         NULL, 1);
 674 static SENSOR_DEVICE_ATTR(temp1_label, S_IRUGO, label_cpu,         NULL, 1);
 675 static SENSOR_DEVICE_ATTR(temp2_label, S_IRUGO, label_cpu_local,   NULL, 1);
 676 static SENSOR_DEVICE_ATTR(temp3_label, S_IRUGO, label_cpu_DTS,     NULL, 1);
 677 static SENSOR_DEVICE_ATTR(temp4_label, S_IRUGO, label_northbridge, NULL, 1);
 678 static SENSOR_DEVICE_ATTR(temp5_label, S_IRUGO, label_vga,         NULL, 1);
 679 static SENSOR_DEVICE_ATTR(temp6_label, S_IRUGO, label_SKIN,        NULL, 1);
 680 static SENSOR_DEVICE_ATTR(pwm1, S_IRUGO | S_IWUSR, pwm_show, pwm_store, 1);
 681 static SENSOR_DEVICE_ATTR(pwm1_enable,
 682                 S_IRUGO | S_IWUSR, pwm_enable_show, pwm_enable_store, 0);
 683
 684 static struct attribute *compal_attributes[] = {
 685         &dev_attr_wake_up_pme.attr,
 686         &dev_attr_wake_up_modem.attr,
 687         &dev_attr_wake_up_lan.attr,
 688         &dev_attr_wake_up_wlan.attr,
 689         &dev_attr_wake_up_key.attr,
 690         &dev_attr_wake_up_mouse.attr,
 691         /* Maybe put the sensor-stuff in a separate hwmon-driver? That way,
 692          * the hwmon sysfs won't be cluttered with the above files. */
 693         &sensor_dev_attr_name.dev_attr.attr,
 694         &sensor_dev_attr_pwm1_enable.dev_attr.attr,
 695         &sensor_dev_attr_pwm1.dev_attr.attr,
 696         &sensor_dev_attr_fan1_input.dev_attr.attr,
 697         &sensor_dev_attr_temp1_input.dev_attr.attr,
 698         &sensor_dev_attr_temp2_input.dev_attr.attr,
 699         &sensor_dev_attr_temp3_input.dev_attr.attr,
 700         &sensor_dev_attr_temp4_input.dev_attr.attr,
 701         &sensor_dev_attr_temp5_input.dev_attr.attr,
 702         &sensor_dev_attr_temp6_input.dev_attr.attr,
 703         &sensor_dev_attr_temp1_label.dev_attr.attr,
 704         &sensor_dev_attr_temp2_label.dev_attr.attr,
 705         &sensor_dev_attr_temp3_label.dev_attr.attr,
 706         &sensor_dev_attr_temp4_label.dev_attr.attr,
 707         &sensor_dev_attr_temp5_label.dev_attr.attr,
 708         &sensor_dev_attr_temp6_label.dev_attr.attr,
 709         NULL
 710 };
 711
 712 static struct attribute_group compal_attribute_group = {
 713         .attrs = compal_attributes
 714 };
 715
 716 static int __devinit compal_probe(struct platform_device *);
 717 static int __devexit compal_remove(struct platform_device *);
 718 static struct platform_driver compal_driver = {
 719         .driver = {
 720                 .name = DRIVER_NAME,
 721                 .owner = THIS_MODULE,
 722         },
 723         .probe  = compal_probe,
 724         .remove = __devexit_p(compal_remove)
 725 };
 726
 727 static enum power_supply_property compal_bat_properties[] = {
 728         POWER_SUPPLY_PROP_STATUS,
 729         POWER_SUPPLY_PROP_HEALTH,
 730         POWER_SUPPLY_PROP_PRESENT,
 731         POWER_SUPPLY_PROP_TECHNOLOGY,
 732         POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
 733         POWER_SUPPLY_PROP_VOLTAGE_NOW,
 734         POWER_SUPPLY_PROP_CURRENT_NOW,
 735         POWER_SUPPLY_PROP_CURRENT_AVG,
 736         POWER_SUPPLY_PROP_POWER_NOW,
 737         POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
 738         POWER_SUPPLY_PROP_CHARGE_NOW,
 739         POWER_SUPPLY_PROP_CAPACITY,
 740         POWER_SUPPLY_PROP_CAPACITY_LEVEL,
 741         POWER_SUPPLY_PROP_TEMP,
 742         POWER_SUPPLY_PROP_TEMP_AMBIENT,
 743         POWER_SUPPLY_PROP_MODEL_NAME,
 744         POWER_SUPPLY_PROP_MANUFACTURER,
 745         POWER_SUPPLY_PROP_SERIAL_NUMBER,
 746 };
 747
 748 static struct backlight_device *compalbl_device;
 749
 750 static struct platform_device *compal_device;
 751
 752 static struct rfkill *wifi_rfkill;
 753 static struct rfkill *bt_rfkill;
 754
 755
 756
 757
 758
 759 /* =================================== */
 760 /* Initialization & clean-up functions */
 761 /* =================================== */
 762
 763 static int dmi_check_cb(const struct dmi_system_id *id)
 764 {
 765         pr_info("Identified laptop model '%s'\n", id->ident);
 766         extra_features = false;
 767         return 1;
 768 }
 769
 770 static int dmi_check_cb_extra(const struct dmi_system_id *id)
 771 {
 772         pr_info("Identified laptop model '%s', enabling extra features\n",
 773                 id->ident);
 774         extra_features = true;
 775         return 1;
 776 }
 777
 778 static struct dmi_system_id __initdata compal_dmi_table[] = {
 779         {
 780                 .ident = "FL90/IFL90",
 781                 .matches = {
 782                         DMI_MATCH(DMI_BOARD_NAME, "IFL90"),
 783                         DMI_MATCH(DMI_BOARD_VERSION, "IFT00"),
 784                 },
 785                 .callback = dmi_check_cb
 786         },
 787         {
 788                 .ident = "FL90/IFL90",
 789                 .matches = {
 790                         DMI_MATCH(DMI_BOARD_NAME, "IFL90"),
 791                         DMI_MATCH(DMI_BOARD_VERSION, "REFERENCE"),
 792                 },
 793                 .callback = dmi_check_cb
 794         },
 795         {
 796                 .ident = "FL91/IFL91",
 797                 .matches = {
 798                         DMI_MATCH(DMI_BOARD_NAME, "IFL91"),
 799                         DMI_MATCH(DMI_BOARD_VERSION, "IFT00"),
 800                 },
 801                 .callback = dmi_check_cb
 802         },
 803         {
 804                 .ident = "FL92/JFL92",
 805                 .matches = {
 806                         DMI_MATCH(DMI_BOARD_NAME, "JFL92"),
 807                         DMI_MATCH(DMI_BOARD_VERSION, "IFT00"),
 808                 },
 809                 .callback = dmi_check_cb
 810         },
 811         {
 812                 .ident = "FT00/IFT00",
 813                 .matches = {
 814                         DMI_MATCH(DMI_BOARD_NAME, "IFT00"),
 815                         DMI_MATCH(DMI_BOARD_VERSION, "IFT00"),
 816                 },
 817                 .callback = dmi_check_cb
 818         },
 819         {
 820                 .ident = "Dell Mini 9",
 821                 .matches = {
 822                         DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
 823                         DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 910"),
 824                 },
 825                 .callback = dmi_check_cb
 826         },
 827         {
 828                 .ident = "Dell Mini 10",
 829                 .matches = {
 830                         DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
 831                         DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1010"),
 832                 },
 833                 .callback = dmi_check_cb
 834         },
 835         {
 836                 .ident = "Dell Mini 10v",
 837                 .matches = {
 838                         DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
 839                         DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1011"),
 840                 },
 841                 .callback = dmi_check_cb
 842         },
 843         {
 844                 .ident = "Dell Mini 1012",
 845                 .matches = {
 846                         DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
 847                         DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1012"),
 848                 },
 849                 .callback = dmi_check_cb
 850         },
 851         {
 852                 .ident = "Dell Inspiron 11z",
 853                 .matches = {
 854                         DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
 855                         DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1110"),
 856                 },
 857                 .callback = dmi_check_cb
 858         },
 859         {
 860                 .ident = "Dell Mini 12",
 861                 .matches = {
 862                         DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
 863                         DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1210"),
 864                 },
 865                 .callback = dmi_check_cb
 866         },
 867         {
 868                 .ident = "JHL90",
 869                 .matches = {
 870                         DMI_MATCH(DMI_BOARD_NAME, "JHL90"),
 871                         DMI_MATCH(DMI_BOARD_VERSION, "REFERENCE"),
 872                 },
 873                 .callback = dmi_check_cb_extra
 874         },
 875         {
 876                 .ident = "KHLB2",
 877                 .matches = {
 878                         DMI_MATCH(DMI_BOARD_NAME, "KHLB2"),
 879                         DMI_MATCH(DMI_BOARD_VERSION, "REFERENCE"),
 880                 },
 881                 .callback = dmi_check_cb_extra
 882         },
 883         { }
 884 };
 885
 886 static void initialize_power_supply_data(struct compal_data *data)
 887 {
 888         data->psy.name = DRIVER_NAME;
 889         data->psy.type = POWER_SUPPLY_TYPE_BATTERY;
 890         data->psy.properties = compal_bat_properties;
 891         data->psy.num_properties = ARRAY_SIZE(compal_bat_properties);
 892         data->psy.get_property = bat_get_property;
 893
 894         ec_read_sequence(BAT_MANUFACTURER_NAME_ADDR,
 895                                         data->bat_manufacturer_name,
 896                                         BAT_MANUFACTURER_NAME_LEN);
 897         data->bat_manufacturer_name[BAT_MANUFACTURER_NAME_LEN] = 0;
 898
 899         ec_read_sequence(BAT_MODEL_NAME_ADDR,
 900                                         data->bat_model_name,
 901                                         BAT_MODEL_NAME_LEN);
 902         data->bat_model_name[BAT_MODEL_NAME_LEN] = 0;
 903
 904         scnprintf(data->bat_serial_number, BAT_SERIAL_NUMBER_LEN + 1, "%d",
 905                                 ec_read_u16(BAT_SERIAL_NUMBER_ADDR));
 906 }
 907
 908 static void initialize_fan_control_data(struct compal_data *data)
 909 {
 910         data->pwm_enable = 2; /* Keep motherboard in control for now */
 911         data->curr_pwm = 255; /* Try not to cause a CPU_on_fire exception
 912                                  if we take over... */
 913 }
 914
 915 static int setup_rfkill(void)
 916 {
 917         int ret;
 918
 919         wifi_rfkill = rfkill_alloc("compal-wifi", &compal_device->dev,
 920                                 RFKILL_TYPE_WLAN, &compal_rfkill_ops,
 921                                 (void *) WIRELESS_WLAN);
 922         if (!wifi_rfkill)
 923                 return -ENOMEM;
 924
 925         ret = rfkill_register(wifi_rfkill);
 926         if (ret)
 927                 goto err_wifi;
 928
 929         bt_rfkill = rfkill_alloc("compal-bluetooth", &compal_device->dev,
 930                                 RFKILL_TYPE_BLUETOOTH, &compal_rfkill_ops,
 931                                 (void *) WIRELESS_BT);
 932         if (!bt_rfkill) {
 933                 ret = -ENOMEM;
 934                 goto err_allocate_bt;
 935         }
 936         ret = rfkill_register(bt_rfkill);
 937         if (ret)
 938                 goto err_register_bt;
 939
 940         return 0;
 941
 942 err_register_bt:
 943         rfkill_destroy(bt_rfkill);
 944
 945 err_allocate_bt:
 946         rfkill_unregister(wifi_rfkill);
 947
 948 err_wifi:
 949         rfkill_destroy(wifi_rfkill);
 950
 951         return ret;
 952 }
 953
 954 static int __init compal_init(void)
 955 {
 956         int ret;
 957
 958         if (acpi_disabled) {
 959                 pr_err("ACPI needs to be enabled for this driver to work!\n");
 960                 return -ENODEV;
 961         }
 962
 963         if (!force && !dmi_check_system(compal_dmi_table)) {
 964                 pr_err("Motherboard not recognized (You could try the module's force-parameter)\n");
 965                 return -ENODEV;
 966         }
 967
 968         if (!acpi_video_backlight_support()) {
 969                 struct backlight_properties props;
 970                 memset(&props, 0, sizeof(struct backlight_properties));
 971                 props.type = BACKLIGHT_PLATFORM;
 972                 props.max_brightness = BACKLIGHT_LEVEL_MAX;
 973                 compalbl_device = backlight_device_register(DRIVER_NAME,
 974                                                             NULL, NULL,
 975                                                             &compalbl_ops,
 976                                                             &props);
 977                 if (IS_ERR(compalbl_device))
 978                         return PTR_ERR(compalbl_device);
 979         }
 980
 981         ret = platform_driver_register(&compal_driver);
 982         if (ret)
 983                 goto err_backlight;
 984
 985         compal_device = platform_device_alloc(DRIVER_NAME, -1);
 986         if (!compal_device) {
 987                 ret = -ENOMEM;
 988                 goto err_platform_driver;
 989         }
 990
 991         ret = platform_device_add(compal_device); /* This calls compal_probe */
 992         if (ret)
 993                 goto err_platform_device;
 994
 995         ret = setup_rfkill();
 996         if (ret)
 997                 goto err_rfkill;
 998
 999         pr_info("Driver " DRIVER_VERSION " successfully loaded\n");
1000         return 0;
1001
1002 err_rfkill:
1003         platform_device_del(compal_device);
1004
1005 err_platform_device:
1006         platform_device_put(compal_device);
1007
1008 err_platform_driver:
1009         platform_driver_unregister(&compal_driver);
1010
1011 err_backlight:
1012         backlight_device_unregister(compalbl_device);
1013
1014         return ret;
1015 }
1016
1017 static int __devinit compal_probe(struct platform_device *pdev)
1018 {
1019         int err;
1020         struct compal_data *data;
1021
1022         if (!extra_features)
1023                 return 0;
1024
1025         /* Fan control */
1026         data = kzalloc(sizeof(struct compal_data), GFP_KERNEL);
1027         if (!data)
1028                 return -ENOMEM;
1029
1030         initialize_fan_control_data(data);
1031
1032         err = sysfs_create_group(&pdev->dev.kobj, &compal_attribute_group);
1033         if (err) {
1034                 kfree(data);
1035                 return err;
1036         }
1037
1038         data->hwmon_dev = hwmon_device_register(&pdev->dev);
1039         if (IS_ERR(data->hwmon_dev)) {
1040                 err = PTR_ERR(data->hwmon_dev);
1041                 sysfs_remove_group(&pdev->dev.kobj,
1042                                 &compal_attribute_group);
1043                 kfree(data);
1044                 return err;
1045         }
1046
1047         /* Power supply */
1048         initialize_power_supply_data(data);
1049         power_supply_register(&compal_device->dev, &data->psy);
1050
1051         platform_set_drvdata(pdev, data);
1052
1053         return 0;
1054 }
1055
1056 static void __exit compal_cleanup(void)
1057 {
1058         platform_device_unregister(compal_device);
1059         platform_driver_unregister(&compal_driver);
1060         backlight_device_unregister(compalbl_device);
1061         rfkill_unregister(wifi_rfkill);
1062         rfkill_unregister(bt_rfkill);
1063         rfkill_destroy(wifi_rfkill);
1064         rfkill_destroy(bt_rfkill);
1065
1066         pr_info("Driver unloaded\n");
1067 }
1068
1069 static int __devexit compal_remove(struct platform_device *pdev)
1070 {
1071         struct compal_data *data;
1072
1073         if (!extra_features)
1074                 return 0;
1075
1076         pr_info("Unloading: resetting fan control to motherboard\n");
1077         pwm_disable_control();
1078
1079         data = platform_get_drvdata(pdev);
1080         hwmon_device_unregister(data->hwmon_dev);
1081         power_supply_unregister(&data->psy);
1082
1083         platform_set_drvdata(pdev, NULL);
1084         kfree(data);
1085
1086         sysfs_remove_group(&pdev->dev.kobj, &compal_attribute_group);
1087
1088         return 0;
1089 }
1090
1091
1092 module_init(compal_init);
1093 module_exit(compal_cleanup);
1094
1095 MODULE_AUTHOR("Cezary Jackiewicz");
1096 MODULE_AUTHOR("Roald Frederickx (roald.frederickx@gmail.com)");
1097 MODULE_DESCRIPTION("Compal Laptop Support");
1098 MODULE_VERSION(DRIVER_VERSION);
1099 MODULE_LICENSE("GPL");
1100
1101 MODULE_ALIAS("dmi:*:rnIFL90:rvrIFT00:*");
1102 MODULE_ALIAS("dmi:*:rnIFL90:rvrREFERENCE:*");
1103 MODULE_ALIAS("dmi:*:rnIFL91:rvrIFT00:*");
1104 MODULE_ALIAS("dmi:*:rnJFL92:rvrIFT00:*");
1105 MODULE_ALIAS("dmi:*:rnIFT00:rvrIFT00:*");
1106 MODULE_ALIAS("dmi:*:rnJHL90:rvrREFERENCE:*");
1107 MODULE_ALIAS("dmi:*:svnDellInc.:pnInspiron910:*");
1108 MODULE_ALIAS("dmi:*:svnDellInc.:pnInspiron1010:*");
1109 MODULE_ALIAS("dmi:*:svnDellInc.:pnInspiron1011:*");
1110 MODULE_ALIAS("dmi:*:svnDellInc.:pnInspiron1012:*");
1111 MODULE_ALIAS("dmi:*:svnDellInc.:pnInspiron1110:*");
1112 MODULE_ALIAS("dmi:*:svnDellInc.:pnInspiron1210:*");