Merge branch 'origin'
[pandora-kernel.git] / drivers / parisc / sba_iommu.c
1 /*
2 **  System Bus Adapter (SBA) I/O MMU manager
3 **
4 **      (c) Copyright 2000-2004 Grant Grundler <grundler @ parisc-linux x org>
5 **      (c) Copyright 2004 Naresh Kumar Inna <knaresh at india x hp x com>
6 **      (c) Copyright 2000-2004 Hewlett-Packard Company
7 **
8 **      Portions (c) 1999 Dave S. Miller (from sparc64 I/O MMU code)
9 **
10 **      This program is free software; you can redistribute it and/or modify
11 **      it under the terms of the GNU General Public License as published by
12 **      the Free Software Foundation; either version 2 of the License, or
13 **      (at your option) any later version.
14 **
15 **
16 ** This module initializes the IOC (I/O Controller) found on B1000/C3000/
17 ** J5000/J7000/N-class/L-class machines and their successors.
18 **
19 ** FIXME: add DMA hint support programming in both sba and lba modules.
20 */
21
22 #include <linux/config.h>
23 #include <linux/types.h>
24 #include <linux/kernel.h>
25 #include <linux/spinlock.h>
26 #include <linux/slab.h>
27 #include <linux/init.h>
28
29 #include <linux/mm.h>
30 #include <linux/string.h>
31 #include <linux/pci.h>
32
33 #include <asm/byteorder.h>
34 #include <asm/io.h>
35 #include <asm/dma.h>            /* for DMA_CHUNK_SIZE */
36
37 #include <asm/hardware.h>       /* for register_parisc_driver() stuff */
38
39 #include <linux/proc_fs.h>
40 #include <linux/seq_file.h>
41
42 #include <asm/runway.h>         /* for proc_runway_root */
43 #include <asm/pdc.h>            /* for PDC_MODEL_* */
44 #include <asm/pdcpat.h>         /* for is_pdc_pat() */
45 #include <asm/parisc-device.h>
46
47
48 /* declared in arch/parisc/kernel/setup.c */
49 extern struct proc_dir_entry * proc_mckinley_root;
50
51 #define MODULE_NAME "SBA"
52
53 #ifdef CONFIG_PROC_FS
54 /* depends on proc fs support. But costs CPU performance */
55 #undef SBA_COLLECT_STATS
56 #endif
57
58 /*
59 ** The number of debug flags is a clue - this code is fragile.
60 ** Don't even think about messing with it unless you have
61 ** plenty of 710's to sacrifice to the computer gods. :^)
62 */
63 #undef DEBUG_SBA_INIT
64 #undef DEBUG_SBA_RUN
65 #undef DEBUG_SBA_RUN_SG
66 #undef DEBUG_SBA_RESOURCE
67 #undef ASSERT_PDIR_SANITY
68 #undef DEBUG_LARGE_SG_ENTRIES
69 #undef DEBUG_DMB_TRAP
70
71 #ifdef DEBUG_SBA_INIT
72 #define DBG_INIT(x...)  printk(x)
73 #else
74 #define DBG_INIT(x...)
75 #endif
76
77 #ifdef DEBUG_SBA_RUN
78 #define DBG_RUN(x...)   printk(x)
79 #else
80 #define DBG_RUN(x...)
81 #endif
82
83 #ifdef DEBUG_SBA_RUN_SG
84 #define DBG_RUN_SG(x...)        printk(x)
85 #else
86 #define DBG_RUN_SG(x...)
87 #endif
88
89
90 #ifdef DEBUG_SBA_RESOURCE
91 #define DBG_RES(x...)   printk(x)
92 #else
93 #define DBG_RES(x...)
94 #endif
95
96 #if defined(CONFIG_64BIT)
97 /* "low end" PA8800 machines use ZX1 chipset: PAT PDC and only run 64-bit */
98 #define ZX1_SUPPORT
99 #endif
100
101 #define SBA_INLINE      __inline__
102
103
104 /*
105 ** The number of pdir entries to "free" before issueing
106 ** a read to PCOM register to flush out PCOM writes.
107 ** Interacts with allocation granularity (ie 4 or 8 entries
108 ** allocated and free'd/purged at a time might make this
109 ** less interesting).
110 */
111 #define DELAYED_RESOURCE_CNT    16
112
113 #define DEFAULT_DMA_HINT_REG    0
114
115 #define ASTRO_RUNWAY_PORT       0x582
116 #define IKE_MERCED_PORT         0x803
117 #define REO_MERCED_PORT         0x804
118 #define REOG_MERCED_PORT        0x805
119 #define PLUTO_MCKINLEY_PORT     0x880
120
121 #define SBA_FUNC_ID     0x0000  /* function id */
122 #define SBA_FCLASS      0x0008  /* function class, bist, header, rev... */
123
124 #define IS_ASTRO(id)            ((id)->hversion == ASTRO_RUNWAY_PORT)
125 #define IS_IKE(id)              ((id)->hversion == IKE_MERCED_PORT)
126 #define IS_PLUTO(id)            ((id)->hversion == PLUTO_MCKINLEY_PORT)
127
128 #define SBA_FUNC_SIZE 4096   /* SBA configuration function reg set */
129
130 #define ASTRO_IOC_OFFSET        (32 * SBA_FUNC_SIZE)
131 #define PLUTO_IOC_OFFSET        (1 * SBA_FUNC_SIZE)
132 /* Ike's IOC's occupy functions 2 and 3 */
133 #define IKE_IOC_OFFSET(p)       ((p+2) * SBA_FUNC_SIZE)
134
135 #define IOC_CTRL          0x8   /* IOC_CTRL offset */
136 #define IOC_CTRL_TC       (1 << 0) /* TOC Enable */
137 #define IOC_CTRL_CE       (1 << 1) /* Coalesce Enable */
138 #define IOC_CTRL_DE       (1 << 2) /* Dillon Enable */
139 #define IOC_CTRL_RM       (1 << 8) /* Real Mode */
140 #define IOC_CTRL_NC       (1 << 9) /* Non Coherent Mode */
141 #define IOC_CTRL_D4       (1 << 11) /* Disable 4-byte coalescing */
142 #define IOC_CTRL_DD       (1 << 13) /* Disable distr. LMMIO range coalescing */
143
144 #define MAX_IOC         2       /* per Ike. Pluto/Astro only have 1. */
145
146 #define ROPES_PER_IOC   8       /* per Ike half or Pluto/Astro */
147
148
149 /*
150 ** Offsets into MBIB (Function 0 on Ike and hopefully Astro)
151 ** Firmware programs this stuff. Don't touch it.
152 */
153 #define LMMIO_DIRECT0_BASE  0x300
154 #define LMMIO_DIRECT0_MASK  0x308
155 #define LMMIO_DIRECT0_ROUTE 0x310
156
157 #define LMMIO_DIST_BASE  0x360
158 #define LMMIO_DIST_MASK  0x368
159 #define LMMIO_DIST_ROUTE 0x370
160
161 #define IOS_DIST_BASE   0x390
162 #define IOS_DIST_MASK   0x398
163 #define IOS_DIST_ROUTE  0x3A0
164
165 #define IOS_DIRECT_BASE 0x3C0
166 #define IOS_DIRECT_MASK 0x3C8
167 #define IOS_DIRECT_ROUTE 0x3D0
168
169 /*
170 ** Offsets into I/O TLB (Function 2 and 3 on Ike)
171 */
172 #define ROPE0_CTL       0x200  /* "regbus pci0" */
173 #define ROPE1_CTL       0x208
174 #define ROPE2_CTL       0x210
175 #define ROPE3_CTL       0x218
176 #define ROPE4_CTL       0x220
177 #define ROPE5_CTL       0x228
178 #define ROPE6_CTL       0x230
179 #define ROPE7_CTL       0x238
180
181 #define HF_ENABLE       0x40
182
183
184 #define IOC_IBASE       0x300   /* IO TLB */
185 #define IOC_IMASK       0x308
186 #define IOC_PCOM        0x310
187 #define IOC_TCNFG       0x318
188 #define IOC_PDIR_BASE   0x320
189
190 /* AGP GART driver looks for this */
191 #define SBA_IOMMU_COOKIE    0x0000badbadc0ffeeUL
192
193
194 /*
195 ** IOC supports 4/8/16/64KB page sizes (see TCNFG register)
196 ** It's safer (avoid memory corruption) to keep DMA page mappings
197 ** equivalently sized to VM PAGE_SIZE.
198 **
199 ** We really can't avoid generating a new mapping for each
200 ** page since the Virtual Coherence Index has to be generated
201 ** and updated for each page.
202 **
203 ** PAGE_SIZE could be greater than IOVP_SIZE. But not the inverse.
204 */
205 #define IOVP_SIZE       PAGE_SIZE
206 #define IOVP_SHIFT      PAGE_SHIFT
207 #define IOVP_MASK       PAGE_MASK
208
209 #define SBA_PERF_CFG    0x708   /* Performance Counter stuff */
210 #define SBA_PERF_MASK1  0x718
211 #define SBA_PERF_MASK2  0x730
212
213
214 /*
215 ** Offsets into PCI Performance Counters (functions 12 and 13)
216 ** Controlled by PERF registers in function 2 & 3 respectively.
217 */
218 #define SBA_PERF_CNT1   0x200
219 #define SBA_PERF_CNT2   0x208
220 #define SBA_PERF_CNT3   0x210
221
222
223 struct ioc {
224         void __iomem    *ioc_hpa;       /* I/O MMU base address */
225         char            *res_map;       /* resource map, bit == pdir entry */
226         u64             *pdir_base;     /* physical base address */
227         unsigned long   ibase;  /* pdir IOV Space base - shared w/lba_pci */
228         unsigned long   imask;  /* pdir IOV Space mask - shared w/lba_pci */
229 #ifdef ZX1_SUPPORT
230         unsigned long   iovp_mask;      /* help convert IOVA to IOVP */
231 #endif
232         unsigned long   *res_hint;      /* next avail IOVP - circular search */
233         spinlock_t      res_lock;
234         unsigned int    res_bitshift;   /* from the LEFT! */
235         unsigned int    res_size;       /* size of resource map in bytes */
236 #ifdef SBA_HINT_SUPPORT
237 /* FIXME : DMA HINTs not used */
238         unsigned long   hint_mask_pdir; /* bits used for DMA hints */
239         unsigned int    hint_shift_pdir;
240 #endif
241 #if DELAYED_RESOURCE_CNT > 0
242         int saved_cnt;
243         struct sba_dma_pair {
244                 dma_addr_t      iova;
245                 size_t          size;
246         } saved[DELAYED_RESOURCE_CNT];
247 #endif
248
249 #ifdef SBA_COLLECT_STATS
250 #define SBA_SEARCH_SAMPLE       0x100
251         unsigned long avg_search[SBA_SEARCH_SAMPLE];
252         unsigned long avg_idx;  /* current index into avg_search */
253         unsigned long used_pages;
254         unsigned long msingle_calls;
255         unsigned long msingle_pages;
256         unsigned long msg_calls;
257         unsigned long msg_pages;
258         unsigned long usingle_calls;
259         unsigned long usingle_pages;
260         unsigned long usg_calls;
261         unsigned long usg_pages;
262 #endif
263
264         /* STUFF We don't need in performance path */
265         unsigned int    pdir_size;      /* in bytes, determined by IOV Space size */
266 };
267
268 struct sba_device {
269         struct sba_device       *next;  /* list of SBA's in system */
270         struct parisc_device    *dev;   /* dev found in bus walk */
271         struct parisc_device_id *iodc;  /* data about dev from firmware */
272         const char              *name;
273         void __iomem            *sba_hpa; /* base address */
274         spinlock_t              sba_lock;
275         unsigned int            flags;  /* state/functionality enabled */
276         unsigned int            hw_rev;  /* HW revision of chip */
277
278         struct resource         chip_resv; /* MMIO reserved for chip */
279         struct resource         iommu_resv; /* MMIO reserved for iommu */
280
281         unsigned int            num_ioc;  /* number of on-board IOC's */
282         struct ioc              ioc[MAX_IOC];
283 };
284
285
286 static struct sba_device *sba_list;
287
288 static unsigned long ioc_needs_fdc = 0;
289
290 /* global count of IOMMUs in the system */
291 static unsigned int global_ioc_cnt = 0;
292
293 /* PA8700 (Piranha 2.2) bug workaround */
294 static unsigned long piranha_bad_128k = 0;
295
296 /* Looks nice and keeps the compiler happy */
297 #define SBA_DEV(d) ((struct sba_device *) (d))
298
299 #ifdef SBA_AGP_SUPPORT
300 static int reserve_sba_gart = 1;
301 #endif
302
303 #define ROUNDUP(x,y) ((x + ((y)-1)) & ~((y)-1))
304
305
306 /************************************
307 ** SBA register read and write support
308 **
309 ** BE WARNED: register writes are posted.
310 **  (ie follow writes which must reach HW with a read)
311 **
312 ** Superdome (in particular, REO) allows only 64-bit CSR accesses.
313 */
314 #define READ_REG32(addr)         le32_to_cpu(__raw_readl(addr))
315 #define READ_REG64(addr)         le64_to_cpu(__raw_readq(addr))
316 #define WRITE_REG32(val, addr) __raw_writel(cpu_to_le32(val), addr)
317 #define WRITE_REG64(val, addr) __raw_writeq(cpu_to_le64(val), addr)
318
319 #ifdef CONFIG_64BIT
320 #define READ_REG(addr)          READ_REG64(addr)
321 #define WRITE_REG(value, addr)  WRITE_REG64(value, addr)
322 #else
323 #define READ_REG(addr)          READ_REG32(addr)
324 #define WRITE_REG(value, addr)  WRITE_REG32(value, addr)
325 #endif
326
327 #ifdef DEBUG_SBA_INIT
328
329 /* NOTE: When CONFIG_64BIT isn't defined, READ_REG64() is two 32-bit reads */
330
331 /**
332  * sba_dump_ranges - debugging only - print ranges assigned to this IOA
333  * @hpa: base address of the sba
334  *
335  * Print the MMIO and IO Port address ranges forwarded by an Astro/Ike/RIO
336  * IO Adapter (aka Bus Converter).
337  */
338 static void
339 sba_dump_ranges(void __iomem *hpa)
340 {
341         DBG_INIT("SBA at 0x%p\n", hpa);
342         DBG_INIT("IOS_DIST_BASE   : %Lx\n", READ_REG64(hpa+IOS_DIST_BASE));
343         DBG_INIT("IOS_DIST_MASK   : %Lx\n", READ_REG64(hpa+IOS_DIST_MASK));
344         DBG_INIT("IOS_DIST_ROUTE  : %Lx\n", READ_REG64(hpa+IOS_DIST_ROUTE));
345         DBG_INIT("\n");
346         DBG_INIT("IOS_DIRECT_BASE : %Lx\n", READ_REG64(hpa+IOS_DIRECT_BASE));
347         DBG_INIT("IOS_DIRECT_MASK : %Lx\n", READ_REG64(hpa+IOS_DIRECT_MASK));
348         DBG_INIT("IOS_DIRECT_ROUTE: %Lx\n", READ_REG64(hpa+IOS_DIRECT_ROUTE));
349 }
350
351 /**
352  * sba_dump_tlb - debugging only - print IOMMU operating parameters
353  * @hpa: base address of the IOMMU
354  *
355  * Print the size/location of the IO MMU PDIR.
356  */
357 static void sba_dump_tlb(void __iomem *hpa)
358 {
359         DBG_INIT("IO TLB at 0x%p\n", hpa);
360         DBG_INIT("IOC_IBASE    : 0x%Lx\n", READ_REG64(hpa+IOC_IBASE));
361         DBG_INIT("IOC_IMASK    : 0x%Lx\n", READ_REG64(hpa+IOC_IMASK));
362         DBG_INIT("IOC_TCNFG    : 0x%Lx\n", READ_REG64(hpa+IOC_TCNFG));
363         DBG_INIT("IOC_PDIR_BASE: 0x%Lx\n", READ_REG64(hpa+IOC_PDIR_BASE));
364         DBG_INIT("\n");
365 }
366 #else
367 #define sba_dump_ranges(x)
368 #define sba_dump_tlb(x)
369 #endif  /* DEBUG_SBA_INIT */
370
371
372 #ifdef ASSERT_PDIR_SANITY
373
374 /**
375  * sba_dump_pdir_entry - debugging only - print one IOMMU PDIR entry
376  * @ioc: IO MMU structure which owns the pdir we are interested in.
377  * @msg: text to print ont the output line.
378  * @pide: pdir index.
379  *
380  * Print one entry of the IO MMU PDIR in human readable form.
381  */
382 static void
383 sba_dump_pdir_entry(struct ioc *ioc, char *msg, uint pide)
384 {
385         /* start printing from lowest pde in rval */
386         u64 *ptr = &(ioc->pdir_base[pide & (~0U * BITS_PER_LONG)]);
387         unsigned long *rptr = (unsigned long *) &(ioc->res_map[(pide >>3) & ~(sizeof(unsigned long) - 1)]);
388         uint rcnt;
389
390         printk(KERN_DEBUG "SBA: %s rp %p bit %d rval 0x%lx\n",
391                  msg,
392                  rptr, pide & (BITS_PER_LONG - 1), *rptr);
393
394         rcnt = 0;
395         while (rcnt < BITS_PER_LONG) {
396                 printk(KERN_DEBUG "%s %2d %p %016Lx\n",
397                         (rcnt == (pide & (BITS_PER_LONG - 1)))
398                                 ? "    -->" : "       ",
399                         rcnt, ptr, *ptr );
400                 rcnt++;
401                 ptr++;
402         }
403         printk(KERN_DEBUG "%s", msg);
404 }
405
406
407 /**
408  * sba_check_pdir - debugging only - consistency checker
409  * @ioc: IO MMU structure which owns the pdir we are interested in.
410  * @msg: text to print ont the output line.
411  *
412  * Verify the resource map and pdir state is consistent
413  */
414 static int
415 sba_check_pdir(struct ioc *ioc, char *msg)
416 {
417         u32 *rptr_end = (u32 *) &(ioc->res_map[ioc->res_size]);
418         u32 *rptr = (u32 *) ioc->res_map;       /* resource map ptr */
419         u64 *pptr = ioc->pdir_base;     /* pdir ptr */
420         uint pide = 0;
421
422         while (rptr < rptr_end) {
423                 u32 rval = *rptr;
424                 int rcnt = 32;  /* number of bits we might check */
425
426                 while (rcnt) {
427                         /* Get last byte and highest bit from that */
428                         u32 pde = ((u32) (((char *)pptr)[7])) << 24;
429                         if ((rval ^ pde) & 0x80000000)
430                         {
431                                 /*
432                                 ** BUMMER!  -- res_map != pdir --
433                                 ** Dump rval and matching pdir entries
434                                 */
435                                 sba_dump_pdir_entry(ioc, msg, pide);
436                                 return(1);
437                         }
438                         rcnt--;
439                         rval <<= 1;     /* try the next bit */
440                         pptr++;
441                         pide++;
442                 }
443                 rptr++; /* look at next word of res_map */
444         }
445         /* It'd be nice if we always got here :^) */
446         return 0;
447 }
448
449
450 /**
451  * sba_dump_sg - debugging only - print Scatter-Gather list
452  * @ioc: IO MMU structure which owns the pdir we are interested in.
453  * @startsg: head of the SG list
454  * @nents: number of entries in SG list
455  *
456  * print the SG list so we can verify it's correct by hand.
457  */
458 static void
459 sba_dump_sg( struct ioc *ioc, struct scatterlist *startsg, int nents)
460 {
461         while (nents-- > 0) {
462                 printk(KERN_DEBUG " %d : %08lx/%05x %p/%05x\n",
463                                 nents,
464                                 (unsigned long) sg_dma_address(startsg),
465                                 sg_dma_len(startsg),
466                                 sg_virt_addr(startsg), startsg->length);
467                 startsg++;
468         }
469 }
470
471 #endif /* ASSERT_PDIR_SANITY */
472
473
474
475
476 /**************************************************************
477 *
478 *   I/O Pdir Resource Management
479 *
480 *   Bits set in the resource map are in use.
481 *   Each bit can represent a number of pages.
482 *   LSbs represent lower addresses (IOVA's).
483 *
484 ***************************************************************/
485 #define PAGES_PER_RANGE 1       /* could increase this to 4 or 8 if needed */
486
487 /* Convert from IOVP to IOVA and vice versa. */
488
489 #ifdef ZX1_SUPPORT
490 /* Pluto (aka ZX1) boxes need to set or clear the ibase bits appropriately */
491 #define SBA_IOVA(ioc,iovp,offset,hint_reg) ((ioc->ibase) | (iovp) | (offset))
492 #define SBA_IOVP(ioc,iova) ((iova) & (ioc)->iovp_mask)
493 #else
494 /* only support Astro and ancestors. Saves a few cycles in key places */
495 #define SBA_IOVA(ioc,iovp,offset,hint_reg) ((iovp) | (offset))
496 #define SBA_IOVP(ioc,iova) (iova)
497 #endif
498
499 #define PDIR_INDEX(iovp)   ((iovp)>>IOVP_SHIFT)
500
501 #define RESMAP_MASK(n)    (~0UL << (BITS_PER_LONG - (n)))
502 #define RESMAP_IDX_MASK   (sizeof(unsigned long) - 1)
503
504
505 /**
506  * sba_search_bitmap - find free space in IO PDIR resource bitmap
507  * @ioc: IO MMU structure which owns the pdir we are interested in.
508  * @bits_wanted: number of entries we need.
509  *
510  * Find consecutive free bits in resource bitmap.
511  * Each bit represents one entry in the IO Pdir.
512  * Cool perf optimization: search for log2(size) bits at a time.
513  */
514 static SBA_INLINE unsigned long
515 sba_search_bitmap(struct ioc *ioc, unsigned long bits_wanted)
516 {
517         unsigned long *res_ptr = ioc->res_hint;
518         unsigned long *res_end = (unsigned long *) &(ioc->res_map[ioc->res_size]);
519         unsigned long pide = ~0UL;
520
521         if (bits_wanted > (BITS_PER_LONG/2)) {
522                 /* Search word at a time - no mask needed */
523                 for(; res_ptr < res_end; ++res_ptr) {
524                         if (*res_ptr == 0) {
525                                 *res_ptr = RESMAP_MASK(bits_wanted);
526                                 pide = ((unsigned long)res_ptr - (unsigned long)ioc->res_map);
527                                 pide <<= 3;     /* convert to bit address */
528                                 break;
529                         }
530                 }
531                 /* point to the next word on next pass */
532                 res_ptr++;
533                 ioc->res_bitshift = 0;
534         } else {
535                 /*
536                 ** Search the resource bit map on well-aligned values.
537                 ** "o" is the alignment.
538                 ** We need the alignment to invalidate I/O TLB using
539                 ** SBA HW features in the unmap path.
540                 */
541                 unsigned long o = 1 << get_order(bits_wanted << PAGE_SHIFT);
542                 uint bitshiftcnt = ROUNDUP(ioc->res_bitshift, o);
543                 unsigned long mask;
544
545                 if (bitshiftcnt >= BITS_PER_LONG) {
546                         bitshiftcnt = 0;
547                         res_ptr++;
548                 }
549                 mask = RESMAP_MASK(bits_wanted) >> bitshiftcnt;
550
551                 DBG_RES("%s() o %ld %p", __FUNCTION__, o, res_ptr);
552                 while(res_ptr < res_end)
553                 { 
554                         DBG_RES("    %p %lx %lx\n", res_ptr, mask, *res_ptr);
555                         WARN_ON(mask == 0);
556                         if(((*res_ptr) & mask) == 0) {
557                                 *res_ptr |= mask;     /* mark resources busy! */
558                                 pide = ((unsigned long)res_ptr - (unsigned long)ioc->res_map);
559                                 pide <<= 3;     /* convert to bit address */
560                                 pide += bitshiftcnt;
561                                 break;
562                         }
563                         mask >>= o;
564                         bitshiftcnt += o;
565                         if (mask == 0) {
566                                 mask = RESMAP_MASK(bits_wanted);
567                                 bitshiftcnt=0;
568                                 res_ptr++;
569                         }
570                 }
571                 /* look in the same word on the next pass */
572                 ioc->res_bitshift = bitshiftcnt + bits_wanted;
573         }
574
575         /* wrapped ? */
576         if (res_end <= res_ptr) {
577                 ioc->res_hint = (unsigned long *) ioc->res_map;
578                 ioc->res_bitshift = 0;
579         } else {
580                 ioc->res_hint = res_ptr;
581         }
582         return (pide);
583 }
584
585
586 /**
587  * sba_alloc_range - find free bits and mark them in IO PDIR resource bitmap
588  * @ioc: IO MMU structure which owns the pdir we are interested in.
589  * @size: number of bytes to create a mapping for
590  *
591  * Given a size, find consecutive unmarked and then mark those bits in the
592  * resource bit map.
593  */
594 static int
595 sba_alloc_range(struct ioc *ioc, size_t size)
596 {
597         unsigned int pages_needed = size >> IOVP_SHIFT;
598 #ifdef SBA_COLLECT_STATS
599         unsigned long cr_start = mfctl(16);
600 #endif
601         unsigned long pide;
602
603         pide = sba_search_bitmap(ioc, pages_needed);
604         if (pide >= (ioc->res_size << 3)) {
605                 pide = sba_search_bitmap(ioc, pages_needed);
606                 if (pide >= (ioc->res_size << 3))
607                         panic("%s: I/O MMU @ %p is out of mapping resources\n",
608                               __FILE__, ioc->ioc_hpa);
609         }
610
611 #ifdef ASSERT_PDIR_SANITY
612         /* verify the first enable bit is clear */
613         if(0x00 != ((u8 *) ioc->pdir_base)[pide*sizeof(u64) + 7]) {
614                 sba_dump_pdir_entry(ioc, "sba_search_bitmap() botched it?", pide);
615         }
616 #endif
617
618         DBG_RES("%s(%x) %d -> %lx hint %x/%x\n",
619                 __FUNCTION__, size, pages_needed, pide,
620                 (uint) ((unsigned long) ioc->res_hint - (unsigned long) ioc->res_map),
621                 ioc->res_bitshift );
622
623 #ifdef SBA_COLLECT_STATS
624         {
625                 unsigned long cr_end = mfctl(16);
626                 unsigned long tmp = cr_end - cr_start;
627                 /* check for roll over */
628                 cr_start = (cr_end < cr_start) ?  -(tmp) : (tmp);
629         }
630         ioc->avg_search[ioc->avg_idx++] = cr_start;
631         ioc->avg_idx &= SBA_SEARCH_SAMPLE - 1;
632
633         ioc->used_pages += pages_needed;
634 #endif
635
636         return (pide);
637 }
638
639
640 /**
641  * sba_free_range - unmark bits in IO PDIR resource bitmap
642  * @ioc: IO MMU structure which owns the pdir we are interested in.
643  * @iova: IO virtual address which was previously allocated.
644  * @size: number of bytes to create a mapping for
645  *
646  * clear bits in the ioc's resource map
647  */
648 static SBA_INLINE void
649 sba_free_range(struct ioc *ioc, dma_addr_t iova, size_t size)
650 {
651         unsigned long iovp = SBA_IOVP(ioc, iova);
652         unsigned int pide = PDIR_INDEX(iovp);
653         unsigned int ridx = pide >> 3;  /* convert bit to byte address */
654         unsigned long *res_ptr = (unsigned long *) &((ioc)->res_map[ridx & ~RESMAP_IDX_MASK]);
655
656         int bits_not_wanted = size >> IOVP_SHIFT;
657
658         /* 3-bits "bit" address plus 2 (or 3) bits for "byte" == bit in word */
659         unsigned long m = RESMAP_MASK(bits_not_wanted) >> (pide & (BITS_PER_LONG - 1));
660
661         DBG_RES("%s( ,%x,%x) %x/%lx %x %p %lx\n",
662                 __FUNCTION__, (uint) iova, size,
663                 bits_not_wanted, m, pide, res_ptr, *res_ptr);
664
665 #ifdef SBA_COLLECT_STATS
666         ioc->used_pages -= bits_not_wanted;
667 #endif
668
669         *res_ptr &= ~m;
670 }
671
672
673 /**************************************************************
674 *
675 *   "Dynamic DMA Mapping" support (aka "Coherent I/O")
676 *
677 ***************************************************************/
678
679 #ifdef SBA_HINT_SUPPORT
680 #define SBA_DMA_HINT(ioc, val) ((val) << (ioc)->hint_shift_pdir)
681 #endif
682
683 typedef unsigned long space_t;
684 #define KERNEL_SPACE 0
685
686 /**
687  * sba_io_pdir_entry - fill in one IO PDIR entry
688  * @pdir_ptr:  pointer to IO PDIR entry
689  * @sid: process Space ID - currently only support KERNEL_SPACE
690  * @vba: Virtual CPU address of buffer to map
691  * @hint: DMA hint set to use for this mapping
692  *
693  * SBA Mapping Routine
694  *
695  * Given a virtual address (vba, arg2) and space id, (sid, arg1)
696  * sba_io_pdir_entry() loads the I/O PDIR entry pointed to by
697  * pdir_ptr (arg0). 
698  * Using the bass-ackwards HP bit numbering, Each IO Pdir entry
699  * for Astro/Ike looks like:
700  *
701  *
702  *  0                    19                                 51   55       63
703  * +-+---------------------+----------------------------------+----+--------+
704  * |V|        U            |            PPN[43:12]            | U  |   VI   |
705  * +-+---------------------+----------------------------------+----+--------+
706  *
707  * Pluto is basically identical, supports fewer physical address bits:
708  *
709  *  0                       23                              51   55       63
710  * +-+------------------------+-------------------------------+----+--------+
711  * |V|        U               |         PPN[39:12]            | U  |   VI   |
712  * +-+------------------------+-------------------------------+----+--------+
713  *
714  *  V  == Valid Bit  (Most Significant Bit is bit 0)
715  *  U  == Unused
716  * PPN == Physical Page Number
717  * VI  == Virtual Index (aka Coherent Index)
718  *
719  * LPA instruction output is put into PPN field.
720  * LCI (Load Coherence Index) instruction provides the "VI" bits.
721  *
722  * We pre-swap the bytes since PCX-W is Big Endian and the
723  * IOMMU uses little endian for the pdir.
724  */
725
726 void SBA_INLINE
727 sba_io_pdir_entry(u64 *pdir_ptr, space_t sid, unsigned long vba,
728                   unsigned long hint)
729 {
730         u64 pa; /* physical address */
731         register unsigned ci; /* coherent index */
732
733         pa = virt_to_phys(vba);
734         pa &= IOVP_MASK;
735
736         mtsp(sid,1);
737         asm("lci 0(%%sr1, %1), %0" : "=r" (ci) : "r" (vba));
738         pa |= (ci >> 12) & 0xff;  /* move CI (8 bits) into lowest byte */
739
740         pa |= 0x8000000000000000ULL;    /* set "valid" bit */
741         *pdir_ptr = cpu_to_le64(pa);    /* swap and store into I/O Pdir */
742
743         /*
744          * If the PDC_MODEL capabilities has Non-coherent IO-PDIR bit set
745          * (bit #61, big endian), we have to flush and sync every time
746          * IO-PDIR is changed in Ike/Astro.
747          */
748         if (ioc_needs_fdc)
749                 asm volatile("fdc %%r0(%0)" : : "r" (pdir_ptr));
750 }
751
752
753 /**
754  * sba_mark_invalid - invalidate one or more IO PDIR entries
755  * @ioc: IO MMU structure which owns the pdir we are interested in.
756  * @iova:  IO Virtual Address mapped earlier
757  * @byte_cnt:  number of bytes this mapping covers.
758  *
759  * Marking the IO PDIR entry(ies) as Invalid and invalidate
760  * corresponding IO TLB entry. The Ike PCOM (Purge Command Register)
761  * is to purge stale entries in the IO TLB when unmapping entries.
762  *
763  * The PCOM register supports purging of multiple pages, with a minium
764  * of 1 page and a maximum of 2GB. Hardware requires the address be
765  * aligned to the size of the range being purged. The size of the range
766  * must be a power of 2. The "Cool perf optimization" in the
767  * allocation routine helps keep that true.
768  */
769 static SBA_INLINE void
770 sba_mark_invalid(struct ioc *ioc, dma_addr_t iova, size_t byte_cnt)
771 {
772         u32 iovp = (u32) SBA_IOVP(ioc,iova);
773         u64 *pdir_ptr = &ioc->pdir_base[PDIR_INDEX(iovp)];
774
775 #ifdef ASSERT_PDIR_SANITY
776         /* Assert first pdir entry is set.
777         **
778         ** Even though this is a big-endian machine, the entries
779         ** in the iopdir are little endian. That's why we look at
780         ** the byte at +7 instead of at +0.
781         */
782         if (0x80 != (((u8 *) pdir_ptr)[7])) {
783                 sba_dump_pdir_entry(ioc,"sba_mark_invalid()", PDIR_INDEX(iovp));
784         }
785 #endif
786
787         if (byte_cnt > IOVP_SIZE)
788         {
789 #if 0
790                 unsigned long entries_per_cacheline = ioc_needs_fdc ?
791                                 L1_CACHE_ALIGN(((unsigned long) pdir_ptr))
792                                         - (unsigned long) pdir_ptr;
793                                 : 262144;
794 #endif
795
796                 /* set "size" field for PCOM */
797                 iovp |= get_order(byte_cnt) + PAGE_SHIFT;
798
799                 do {
800                         /* clear I/O Pdir entry "valid" bit first */
801                         ((u8 *) pdir_ptr)[7] = 0;
802                         if (ioc_needs_fdc) {
803                                 asm volatile("fdc %%r0(%0)" : : "r" (pdir_ptr));
804 #if 0
805                                 entries_per_cacheline = L1_CACHE_SHIFT - 3;
806 #endif
807                         }
808                         pdir_ptr++;
809                         byte_cnt -= IOVP_SIZE;
810                 } while (byte_cnt > IOVP_SIZE);
811         } else
812                 iovp |= IOVP_SHIFT;     /* set "size" field for PCOM */
813
814         /*
815         ** clear I/O PDIR entry "valid" bit.
816         ** We have to R/M/W the cacheline regardless how much of the
817         ** pdir entry that we clobber.
818         ** The rest of the entry would be useful for debugging if we
819         ** could dump core on HPMC.
820         */
821         ((u8 *) pdir_ptr)[7] = 0;
822         if (ioc_needs_fdc)
823                 asm volatile("fdc %%r0(%0)" : : "r" (pdir_ptr));
824
825         WRITE_REG( SBA_IOVA(ioc, iovp, 0, 0), ioc->ioc_hpa+IOC_PCOM);
826 }
827
828 /**
829  * sba_dma_supported - PCI driver can query DMA support
830  * @dev: instance of PCI owned by the driver that's asking
831  * @mask:  number of address bits this PCI device can handle
832  *
833  * See Documentation/DMA-mapping.txt
834  */
835 static int sba_dma_supported( struct device *dev, u64 mask)
836 {
837         struct ioc *ioc;
838
839         if (dev == NULL) {
840                 printk(KERN_ERR MODULE_NAME ": EISA/ISA/et al not supported\n");
841                 BUG();
842                 return(0);
843         }
844
845         /* Documentation/DMA-mapping.txt tells drivers to try 64-bit first,
846          * then fall back to 32-bit if that fails.
847          * We are just "encouraging" 32-bit DMA masks here since we can
848          * never allow IOMMU bypass unless we add special support for ZX1.
849          */
850         if (mask > ~0U)
851                 return 0;
852
853         ioc = GET_IOC(dev);
854
855         /*
856          * check if mask is >= than the current max IO Virt Address
857          * The max IO Virt address will *always* < 30 bits.
858          */
859         return((int)(mask >= (ioc->ibase - 1 +
860                         (ioc->pdir_size / sizeof(u64) * IOVP_SIZE) )));
861 }
862
863
864 /**
865  * sba_map_single - map one buffer and return IOVA for DMA
866  * @dev: instance of PCI owned by the driver that's asking.
867  * @addr:  driver buffer to map.
868  * @size:  number of bytes to map in driver buffer.
869  * @direction:  R/W or both.
870  *
871  * See Documentation/DMA-mapping.txt
872  */
873 static dma_addr_t
874 sba_map_single(struct device *dev, void *addr, size_t size,
875                enum dma_data_direction direction)
876 {
877         struct ioc *ioc;
878         unsigned long flags; 
879         dma_addr_t iovp;
880         dma_addr_t offset;
881         u64 *pdir_start;
882         int pide;
883
884         ioc = GET_IOC(dev);
885
886         /* save offset bits */
887         offset = ((dma_addr_t) (long) addr) & ~IOVP_MASK;
888
889         /* round up to nearest IOVP_SIZE */
890         size = (size + offset + ~IOVP_MASK) & IOVP_MASK;
891
892         spin_lock_irqsave(&ioc->res_lock, flags);
893 #ifdef ASSERT_PDIR_SANITY
894         sba_check_pdir(ioc,"Check before sba_map_single()");
895 #endif
896
897 #ifdef SBA_COLLECT_STATS
898         ioc->msingle_calls++;
899         ioc->msingle_pages += size >> IOVP_SHIFT;
900 #endif
901         pide = sba_alloc_range(ioc, size);
902         iovp = (dma_addr_t) pide << IOVP_SHIFT;
903
904         DBG_RUN("%s() 0x%p -> 0x%lx\n",
905                 __FUNCTION__, addr, (long) iovp | offset);
906
907         pdir_start = &(ioc->pdir_base[pide]);
908
909         while (size > 0) {
910                 sba_io_pdir_entry(pdir_start, KERNEL_SPACE, (unsigned long) addr, 0);
911
912                 DBG_RUN("       pdir 0x%p %02x%02x%02x%02x%02x%02x%02x%02x\n",
913                         pdir_start,
914                         (u8) (((u8 *) pdir_start)[7]),
915                         (u8) (((u8 *) pdir_start)[6]),
916                         (u8) (((u8 *) pdir_start)[5]),
917                         (u8) (((u8 *) pdir_start)[4]),
918                         (u8) (((u8 *) pdir_start)[3]),
919                         (u8) (((u8 *) pdir_start)[2]),
920                         (u8) (((u8 *) pdir_start)[1]),
921                         (u8) (((u8 *) pdir_start)[0])
922                         );
923
924                 addr += IOVP_SIZE;
925                 size -= IOVP_SIZE;
926                 pdir_start++;
927         }
928
929         /* force FDC ops in io_pdir_entry() to be visible to IOMMU */
930         if (ioc_needs_fdc)
931                 asm volatile("sync" : : );
932
933 #ifdef ASSERT_PDIR_SANITY
934         sba_check_pdir(ioc,"Check after sba_map_single()");
935 #endif
936         spin_unlock_irqrestore(&ioc->res_lock, flags);
937
938         /* form complete address */
939         return SBA_IOVA(ioc, iovp, offset, DEFAULT_DMA_HINT_REG);
940 }
941
942
943 /**
944  * sba_unmap_single - unmap one IOVA and free resources
945  * @dev: instance of PCI owned by the driver that's asking.
946  * @iova:  IOVA of driver buffer previously mapped.
947  * @size:  number of bytes mapped in driver buffer.
948  * @direction:  R/W or both.
949  *
950  * See Documentation/DMA-mapping.txt
951  */
952 static void
953 sba_unmap_single(struct device *dev, dma_addr_t iova, size_t size,
954                  enum dma_data_direction direction)
955 {
956         struct ioc *ioc;
957 #if DELAYED_RESOURCE_CNT > 0
958         struct sba_dma_pair *d;
959 #endif
960         unsigned long flags; 
961         dma_addr_t offset;
962
963         DBG_RUN("%s() iovp 0x%lx/%x\n", __FUNCTION__, (long) iova, size);
964
965         ioc = GET_IOC(dev);
966         offset = iova & ~IOVP_MASK;
967         iova ^= offset;        /* clear offset bits */
968         size += offset;
969         size = ROUNDUP(size, IOVP_SIZE);
970
971         spin_lock_irqsave(&ioc->res_lock, flags);
972
973 #ifdef SBA_COLLECT_STATS
974         ioc->usingle_calls++;
975         ioc->usingle_pages += size >> IOVP_SHIFT;
976 #endif
977
978         sba_mark_invalid(ioc, iova, size);
979
980 #if DELAYED_RESOURCE_CNT > 0
981         /* Delaying when we re-use a IO Pdir entry reduces the number
982          * of MMIO reads needed to flush writes to the PCOM register.
983          */
984         d = &(ioc->saved[ioc->saved_cnt]);
985         d->iova = iova;
986         d->size = size;
987         if (++(ioc->saved_cnt) >= DELAYED_RESOURCE_CNT) {
988                 int cnt = ioc->saved_cnt;
989                 while (cnt--) {
990                         sba_free_range(ioc, d->iova, d->size);
991                         d--;
992                 }
993                 ioc->saved_cnt = 0;
994
995                 READ_REG(ioc->ioc_hpa+IOC_PCOM);        /* flush purges */
996         }
997 #else /* DELAYED_RESOURCE_CNT == 0 */
998         sba_free_range(ioc, iova, size);
999
1000         /* If fdc's were issued, force fdc's to be visible now */
1001         if (ioc_needs_fdc)
1002                 asm volatile("sync" : : );
1003
1004         READ_REG(ioc->ioc_hpa+IOC_PCOM);        /* flush purges */
1005 #endif /* DELAYED_RESOURCE_CNT == 0 */
1006
1007         spin_unlock_irqrestore(&ioc->res_lock, flags);
1008
1009         /* XXX REVISIT for 2.5 Linux - need syncdma for zero-copy support.
1010         ** For Astro based systems this isn't a big deal WRT performance.
1011         ** As long as 2.4 kernels copyin/copyout data from/to userspace,
1012         ** we don't need the syncdma. The issue here is I/O MMU cachelines
1013         ** are *not* coherent in all cases.  May be hwrev dependent.
1014         ** Need to investigate more.
1015         asm volatile("syncdma");        
1016         */
1017 }
1018
1019
1020 /**
1021  * sba_alloc_consistent - allocate/map shared mem for DMA
1022  * @hwdev: instance of PCI owned by the driver that's asking.
1023  * @size:  number of bytes mapped in driver buffer.
1024  * @dma_handle:  IOVA of new buffer.
1025  *
1026  * See Documentation/DMA-mapping.txt
1027  */
1028 static void *sba_alloc_consistent(struct device *hwdev, size_t size,
1029                                         dma_addr_t *dma_handle, gfp_t gfp)
1030 {
1031         void *ret;
1032
1033         if (!hwdev) {
1034                 /* only support PCI */
1035                 *dma_handle = 0;
1036                 return 0;
1037         }
1038
1039         ret = (void *) __get_free_pages(gfp, get_order(size));
1040
1041         if (ret) {
1042                 memset(ret, 0, size);
1043                 *dma_handle = sba_map_single(hwdev, ret, size, 0);
1044         }
1045
1046         return ret;
1047 }
1048
1049
1050 /**
1051  * sba_free_consistent - free/unmap shared mem for DMA
1052  * @hwdev: instance of PCI owned by the driver that's asking.
1053  * @size:  number of bytes mapped in driver buffer.
1054  * @vaddr:  virtual address IOVA of "consistent" buffer.
1055  * @dma_handler:  IO virtual address of "consistent" buffer.
1056  *
1057  * See Documentation/DMA-mapping.txt
1058  */
1059 static void
1060 sba_free_consistent(struct device *hwdev, size_t size, void *vaddr,
1061                     dma_addr_t dma_handle)
1062 {
1063         sba_unmap_single(hwdev, dma_handle, size, 0);
1064         free_pages((unsigned long) vaddr, get_order(size));
1065 }
1066
1067
1068 /*
1069 ** Since 0 is a valid pdir_base index value, can't use that
1070 ** to determine if a value is valid or not. Use a flag to indicate
1071 ** the SG list entry contains a valid pdir index.
1072 */
1073 #define PIDE_FLAG 0x80000000UL
1074
1075 #ifdef SBA_COLLECT_STATS
1076 #define IOMMU_MAP_STATS
1077 #endif
1078 #include "iommu-helpers.h"
1079
1080 #ifdef DEBUG_LARGE_SG_ENTRIES
1081 int dump_run_sg = 0;
1082 #endif
1083
1084
1085 /**
1086  * sba_map_sg - map Scatter/Gather list
1087  * @dev: instance of PCI owned by the driver that's asking.
1088  * @sglist:  array of buffer/length pairs
1089  * @nents:  number of entries in list
1090  * @direction:  R/W or both.
1091  *
1092  * See Documentation/DMA-mapping.txt
1093  */
1094 static int
1095 sba_map_sg(struct device *dev, struct scatterlist *sglist, int nents,
1096            enum dma_data_direction direction)
1097 {
1098         struct ioc *ioc;
1099         int coalesced, filled = 0;
1100         unsigned long flags;
1101
1102         DBG_RUN_SG("%s() START %d entries\n", __FUNCTION__, nents);
1103
1104         ioc = GET_IOC(dev);
1105
1106         /* Fast path single entry scatterlists. */
1107         if (nents == 1) {
1108                 sg_dma_address(sglist) = sba_map_single(dev,
1109                                                 (void *)sg_virt_addr(sglist),
1110                                                 sglist->length, direction);
1111                 sg_dma_len(sglist)     = sglist->length;
1112                 return 1;
1113         }
1114
1115         spin_lock_irqsave(&ioc->res_lock, flags);
1116
1117 #ifdef ASSERT_PDIR_SANITY
1118         if (sba_check_pdir(ioc,"Check before sba_map_sg()"))
1119         {
1120                 sba_dump_sg(ioc, sglist, nents);
1121                 panic("Check before sba_map_sg()");
1122         }
1123 #endif
1124
1125 #ifdef SBA_COLLECT_STATS
1126         ioc->msg_calls++;
1127 #endif
1128
1129         /*
1130         ** First coalesce the chunks and allocate I/O pdir space
1131         **
1132         ** If this is one DMA stream, we can properly map using the
1133         ** correct virtual address associated with each DMA page.
1134         ** w/o this association, we wouldn't have coherent DMA!
1135         ** Access to the virtual address is what forces a two pass algorithm.
1136         */
1137         coalesced = iommu_coalesce_chunks(ioc, sglist, nents, sba_alloc_range);
1138
1139         /*
1140         ** Program the I/O Pdir
1141         **
1142         ** map the virtual addresses to the I/O Pdir
1143         ** o dma_address will contain the pdir index
1144         ** o dma_len will contain the number of bytes to map 
1145         ** o address contains the virtual address.
1146         */
1147         filled = iommu_fill_pdir(ioc, sglist, nents, 0, sba_io_pdir_entry);
1148
1149         /* force FDC ops in io_pdir_entry() to be visible to IOMMU */
1150         if (ioc_needs_fdc)
1151                 asm volatile("sync" : : );
1152
1153 #ifdef ASSERT_PDIR_SANITY
1154         if (sba_check_pdir(ioc,"Check after sba_map_sg()"))
1155         {
1156                 sba_dump_sg(ioc, sglist, nents);
1157                 panic("Check after sba_map_sg()\n");
1158         }
1159 #endif
1160
1161         spin_unlock_irqrestore(&ioc->res_lock, flags);
1162
1163         DBG_RUN_SG("%s() DONE %d mappings\n", __FUNCTION__, filled);
1164
1165         return filled;
1166 }
1167
1168
1169 /**
1170  * sba_unmap_sg - unmap Scatter/Gather list
1171  * @dev: instance of PCI owned by the driver that's asking.
1172  * @sglist:  array of buffer/length pairs
1173  * @nents:  number of entries in list
1174  * @direction:  R/W or both.
1175  *
1176  * See Documentation/DMA-mapping.txt
1177  */
1178 static void 
1179 sba_unmap_sg(struct device *dev, struct scatterlist *sglist, int nents,
1180              enum dma_data_direction direction)
1181 {
1182         struct ioc *ioc;
1183 #ifdef ASSERT_PDIR_SANITY
1184         unsigned long flags;
1185 #endif
1186
1187         DBG_RUN_SG("%s() START %d entries,  %p,%x\n",
1188                 __FUNCTION__, nents, sg_virt_addr(sglist), sglist->length);
1189
1190         ioc = GET_IOC(dev);
1191
1192 #ifdef SBA_COLLECT_STATS
1193         ioc->usg_calls++;
1194 #endif
1195
1196 #ifdef ASSERT_PDIR_SANITY
1197         spin_lock_irqsave(&ioc->res_lock, flags);
1198         sba_check_pdir(ioc,"Check before sba_unmap_sg()");
1199         spin_unlock_irqrestore(&ioc->res_lock, flags);
1200 #endif
1201
1202         while (sg_dma_len(sglist) && nents--) {
1203
1204                 sba_unmap_single(dev, sg_dma_address(sglist), sg_dma_len(sglist), direction);
1205 #ifdef SBA_COLLECT_STATS
1206                 ioc->usg_pages += ((sg_dma_address(sglist) & ~IOVP_MASK) + sg_dma_len(sglist) + IOVP_SIZE - 1) >> PAGE_SHIFT;
1207                 ioc->usingle_calls--;   /* kluge since call is unmap_sg() */
1208 #endif
1209                 ++sglist;
1210         }
1211
1212         DBG_RUN_SG("%s() DONE (nents %d)\n", __FUNCTION__,  nents);
1213
1214 #ifdef ASSERT_PDIR_SANITY
1215         spin_lock_irqsave(&ioc->res_lock, flags);
1216         sba_check_pdir(ioc,"Check after sba_unmap_sg()");
1217         spin_unlock_irqrestore(&ioc->res_lock, flags);
1218 #endif
1219
1220 }
1221
1222 static struct hppa_dma_ops sba_ops = {
1223         .dma_supported =        sba_dma_supported,
1224         .alloc_consistent =     sba_alloc_consistent,
1225         .alloc_noncoherent =    sba_alloc_consistent,
1226         .free_consistent =      sba_free_consistent,
1227         .map_single =           sba_map_single,
1228         .unmap_single =         sba_unmap_single,
1229         .map_sg =               sba_map_sg,
1230         .unmap_sg =             sba_unmap_sg,
1231         .dma_sync_single_for_cpu =      NULL,
1232         .dma_sync_single_for_device =   NULL,
1233         .dma_sync_sg_for_cpu =          NULL,
1234         .dma_sync_sg_for_device =       NULL,
1235 };
1236
1237
1238 /**************************************************************************
1239 **
1240 **   SBA PAT PDC support
1241 **
1242 **   o call pdc_pat_cell_module()
1243 **   o store ranges in PCI "resource" structures
1244 **
1245 **************************************************************************/
1246
1247 static void
1248 sba_get_pat_resources(struct sba_device *sba_dev)
1249 {
1250 #if 0
1251 /*
1252 ** TODO/REVISIT/FIXME: support for directed ranges requires calls to
1253 **      PAT PDC to program the SBA/LBA directed range registers...this
1254 **      burden may fall on the LBA code since it directly supports the
1255 **      PCI subsystem. It's not clear yet. - ggg
1256 */
1257 PAT_MOD(mod)->mod_info.mod_pages   = PAT_GET_MOD_PAGES(temp);
1258         FIXME : ???
1259 PAT_MOD(mod)->mod_info.dvi         = PAT_GET_DVI(temp);
1260         Tells where the dvi bits are located in the address.
1261 PAT_MOD(mod)->mod_info.ioc         = PAT_GET_IOC(temp);
1262         FIXME : ???
1263 #endif
1264 }
1265
1266
1267 /**************************************************************
1268 *
1269 *   Initialization and claim
1270 *
1271 ***************************************************************/
1272 #define PIRANHA_ADDR_MASK       0x00160000UL /* bit 17,18,20 */
1273 #define PIRANHA_ADDR_VAL        0x00060000UL /* bit 17,18 on */
1274 static void *
1275 sba_alloc_pdir(unsigned int pdir_size)
1276 {
1277         unsigned long pdir_base;
1278         unsigned long pdir_order = get_order(pdir_size);
1279
1280         pdir_base = __get_free_pages(GFP_KERNEL, pdir_order);
1281         if (NULL == (void *) pdir_base) {
1282                 panic("%s() could not allocate I/O Page Table\n",
1283                         __FUNCTION__);
1284         }
1285
1286         /* If this is not PA8700 (PCX-W2)
1287         **      OR newer than ver 2.2
1288         **      OR in a system that doesn't need VINDEX bits from SBA,
1289         **
1290         ** then we aren't exposed to the HW bug.
1291         */
1292         if ( ((boot_cpu_data.pdc.cpuid >> 5) & 0x7f) != 0x13
1293                         || (boot_cpu_data.pdc.versions > 0x202)
1294                         || (boot_cpu_data.pdc.capabilities & 0x08L) )
1295                 return (void *) pdir_base;
1296
1297         /*
1298          * PA8700 (PCX-W2, aka piranha) silent data corruption fix
1299          *
1300          * An interaction between PA8700 CPU (Ver 2.2 or older) and
1301          * Ike/Astro can cause silent data corruption. This is only
1302          * a problem if the I/O PDIR is located in memory such that
1303          * (little-endian)  bits 17 and 18 are on and bit 20 is off.
1304          *
1305          * Since the max IO Pdir size is 2MB, by cleverly allocating the
1306          * right physical address, we can either avoid (IOPDIR <= 1MB)
1307          * or minimize (2MB IO Pdir) the problem if we restrict the
1308          * IO Pdir to a maximum size of 2MB-128K (1902K).
1309          *
1310          * Because we always allocate 2^N sized IO pdirs, either of the
1311          * "bad" regions will be the last 128K if at all. That's easy
1312          * to test for.
1313          * 
1314          */
1315         if (pdir_order <= (19-12)) {
1316                 if (((virt_to_phys(pdir_base)+pdir_size-1) & PIRANHA_ADDR_MASK) == PIRANHA_ADDR_VAL) {
1317                         /* allocate a new one on 512k alignment */
1318                         unsigned long new_pdir = __get_free_pages(GFP_KERNEL, (19-12));
1319                         /* release original */
1320                         free_pages(pdir_base, pdir_order);
1321
1322                         pdir_base = new_pdir;
1323
1324                         /* release excess */
1325                         while (pdir_order < (19-12)) {
1326                                 new_pdir += pdir_size;
1327                                 free_pages(new_pdir, pdir_order);
1328                                 pdir_order +=1;
1329                                 pdir_size <<=1;
1330                         }
1331                 }
1332         } else {
1333                 /*
1334                 ** 1MB or 2MB Pdir
1335                 ** Needs to be aligned on an "odd" 1MB boundary.
1336                 */
1337                 unsigned long new_pdir = __get_free_pages(GFP_KERNEL, pdir_order+1); /* 2 or 4MB */
1338
1339                 /* release original */
1340                 free_pages( pdir_base, pdir_order);
1341
1342                 /* release first 1MB */
1343                 free_pages(new_pdir, 20-12);
1344
1345                 pdir_base = new_pdir + 1024*1024;
1346
1347                 if (pdir_order > (20-12)) {
1348                         /*
1349                         ** 2MB Pdir.
1350                         **
1351                         ** Flag tells init_bitmap() to mark bad 128k as used
1352                         ** and to reduce the size by 128k.
1353                         */
1354                         piranha_bad_128k = 1;
1355
1356                         new_pdir += 3*1024*1024;
1357                         /* release last 1MB */
1358                         free_pages(new_pdir, 20-12);
1359
1360                         /* release unusable 128KB */
1361                         free_pages(new_pdir - 128*1024 , 17-12);
1362
1363                         pdir_size -= 128*1024;
1364                 }
1365         }
1366
1367         memset((void *) pdir_base, 0, pdir_size);
1368         return (void *) pdir_base;
1369 }
1370
1371 static struct device *next_device(struct klist_iter *i)
1372 {
1373         struct klist_node * n = klist_next(i);
1374         return n ? container_of(n, struct device, knode_parent) : NULL;
1375 }
1376
1377 /* setup Mercury or Elroy IBASE/IMASK registers. */
1378 static void 
1379 setup_ibase_imask(struct parisc_device *sba, struct ioc *ioc, int ioc_num)
1380 {
1381         /* lba_set_iregs() is in drivers/parisc/lba_pci.c */
1382         extern void lba_set_iregs(struct parisc_device *, u32, u32);
1383         struct device *dev;
1384         struct klist_iter i;
1385
1386         klist_iter_init(&sba->dev.klist_children, &i);
1387         while ((dev = next_device(&i))) {
1388                 struct parisc_device *lba = to_parisc_device(dev);
1389                 int rope_num = (lba->hpa.start >> 13) & 0xf;
1390                 if (rope_num >> 3 == ioc_num)
1391                         lba_set_iregs(lba, ioc->ibase, ioc->imask);
1392         }
1393         klist_iter_exit(&i);
1394 }
1395
1396 static void
1397 sba_ioc_init_pluto(struct parisc_device *sba, struct ioc *ioc, int ioc_num)
1398 {
1399         u32 iova_space_mask;
1400         u32 iova_space_size;
1401         int iov_order, tcnfg;
1402 #ifdef SBA_AGP_SUPPORT
1403         int agp_found = 0;
1404 #endif
1405         /*
1406         ** Firmware programs the base and size of a "safe IOVA space"
1407         ** (one that doesn't overlap memory or LMMIO space) in the
1408         ** IBASE and IMASK registers.
1409         */
1410         ioc->ibase = READ_REG(ioc->ioc_hpa + IOC_IBASE);
1411         iova_space_size = ~(READ_REG(ioc->ioc_hpa + IOC_IMASK) & 0xFFFFFFFFUL) + 1;
1412
1413         if ((ioc->ibase < 0xfed00000UL) && ((ioc->ibase + iova_space_size) > 0xfee00000UL)) {
1414                 printk("WARNING: IOV space overlaps local config and interrupt message, truncating\n");
1415                 iova_space_size /= 2;
1416         }
1417
1418         /*
1419         ** iov_order is always based on a 1GB IOVA space since we want to
1420         ** turn on the other half for AGP GART.
1421         */
1422         iov_order = get_order(iova_space_size >> (IOVP_SHIFT - PAGE_SHIFT));
1423         ioc->pdir_size = (iova_space_size / IOVP_SIZE) * sizeof(u64);
1424
1425         DBG_INIT("%s() hpa 0x%lx IOV %dMB (%d bits)\n",
1426                 __FUNCTION__, ioc->ioc_hpa, iova_space_size >> 20,
1427                 iov_order + PAGE_SHIFT);
1428
1429         ioc->pdir_base = (void *) __get_free_pages(GFP_KERNEL,
1430                                                    get_order(ioc->pdir_size));
1431         if (!ioc->pdir_base)
1432                 panic("Couldn't allocate I/O Page Table\n");
1433
1434         memset(ioc->pdir_base, 0, ioc->pdir_size);
1435
1436         DBG_INIT("%s() pdir %p size %x\n",
1437                         __FUNCTION__, ioc->pdir_base, ioc->pdir_size);
1438
1439 #ifdef SBA_HINT_SUPPORT
1440         ioc->hint_shift_pdir = iov_order + PAGE_SHIFT;
1441         ioc->hint_mask_pdir = ~(0x3 << (iov_order + PAGE_SHIFT));
1442
1443         DBG_INIT("      hint_shift_pdir %x hint_mask_pdir %lx\n",
1444                 ioc->hint_shift_pdir, ioc->hint_mask_pdir);
1445 #endif
1446
1447         WARN_ON((((unsigned long) ioc->pdir_base) & PAGE_MASK) != (unsigned long) ioc->pdir_base);
1448         WRITE_REG(virt_to_phys(ioc->pdir_base), ioc->ioc_hpa + IOC_PDIR_BASE);
1449
1450         /* build IMASK for IOC and Elroy */
1451         iova_space_mask =  0xffffffff;
1452         iova_space_mask <<= (iov_order + PAGE_SHIFT);
1453         ioc->imask = iova_space_mask;
1454 #ifdef ZX1_SUPPORT
1455         ioc->iovp_mask = ~(iova_space_mask + PAGE_SIZE - 1);
1456 #endif
1457         sba_dump_tlb(ioc->ioc_hpa);
1458
1459         setup_ibase_imask(sba, ioc, ioc_num);
1460
1461         WRITE_REG(ioc->imask, ioc->ioc_hpa + IOC_IMASK);
1462
1463 #ifdef CONFIG_64BIT
1464         /*
1465         ** Setting the upper bits makes checking for bypass addresses
1466         ** a little faster later on.
1467         */
1468         ioc->imask |= 0xFFFFFFFF00000000UL;
1469 #endif
1470
1471         /* Set I/O PDIR Page size to system page size */
1472         switch (PAGE_SHIFT) {
1473                 case 12: tcnfg = 0; break;      /*  4K */
1474                 case 13: tcnfg = 1; break;      /*  8K */
1475                 case 14: tcnfg = 2; break;      /* 16K */
1476                 case 16: tcnfg = 3; break;      /* 64K */
1477                 default:
1478                         panic(__FILE__ "Unsupported system page size %d",
1479                                 1 << PAGE_SHIFT);
1480                         break;
1481         }
1482         WRITE_REG(tcnfg, ioc->ioc_hpa + IOC_TCNFG);
1483
1484         /*
1485         ** Program the IOC's ibase and enable IOVA translation
1486         ** Bit zero == enable bit.
1487         */
1488         WRITE_REG(ioc->ibase | 1, ioc->ioc_hpa + IOC_IBASE);
1489
1490         /*
1491         ** Clear I/O TLB of any possible entries.
1492         ** (Yes. This is a bit paranoid...but so what)
1493         */
1494         WRITE_REG(ioc->ibase | 31, ioc->ioc_hpa + IOC_PCOM);
1495
1496 #ifdef SBA_AGP_SUPPORT
1497         /*
1498         ** If an AGP device is present, only use half of the IOV space
1499         ** for PCI DMA.  Unfortunately we can't know ahead of time
1500         ** whether GART support will actually be used, for now we
1501         ** can just key on any AGP device found in the system.
1502         ** We program the next pdir index after we stop w/ a key for
1503         ** the GART code to handshake on.
1504         */
1505         device=NULL;
1506         for (lba = sba->child; lba; lba = lba->sibling) {
1507                 if (IS_QUICKSILVER(lba))
1508                         break;
1509         }
1510
1511         if (lba) {
1512                 DBG_INIT("%s: Reserving half of IOVA space for AGP GART support\n", __FUNCTION__);
1513                 ioc->pdir_size /= 2;
1514                 ((u64 *)ioc->pdir_base)[PDIR_INDEX(iova_space_size/2)] = SBA_IOMMU_COOKIE;
1515         } else {
1516                 DBG_INIT("%s: No GART needed - no AGP controller found\n", __FUNCTION__);
1517         }
1518 #endif /* 0 */
1519
1520 }
1521
1522 static void
1523 sba_ioc_init(struct parisc_device *sba, struct ioc *ioc, int ioc_num)
1524 {
1525         u32 iova_space_size, iova_space_mask;
1526         unsigned int pdir_size, iov_order;
1527
1528         /*
1529         ** Determine IOVA Space size from memory size.
1530         **
1531         ** Ideally, PCI drivers would register the maximum number
1532         ** of DMA they can have outstanding for each device they
1533         ** own.  Next best thing would be to guess how much DMA
1534         ** can be outstanding based on PCI Class/sub-class. Both
1535         ** methods still require some "extra" to support PCI
1536         ** Hot-Plug/Removal of PCI cards. (aka PCI OLARD).
1537         **
1538         ** While we have 32-bits "IOVA" space, top two 2 bits are used
1539         ** for DMA hints - ergo only 30 bits max.
1540         */
1541
1542         iova_space_size = (u32) (num_physpages/global_ioc_cnt);
1543
1544         /* limit IOVA space size to 1MB-1GB */
1545         if (iova_space_size < (1 << (20 - PAGE_SHIFT))) {
1546                 iova_space_size = 1 << (20 - PAGE_SHIFT);
1547         }
1548         else if (iova_space_size > (1 << (30 - PAGE_SHIFT))) {
1549                 iova_space_size = 1 << (30 - PAGE_SHIFT);
1550         }
1551
1552         /*
1553         ** iova space must be log2() in size.
1554         ** thus, pdir/res_map will also be log2().
1555         ** PIRANHA BUG: Exception is when IO Pdir is 2MB (gets reduced)
1556         */
1557         iov_order = get_order(iova_space_size << PAGE_SHIFT);
1558
1559         /* iova_space_size is now bytes, not pages */
1560         iova_space_size = 1 << (iov_order + PAGE_SHIFT);
1561
1562         ioc->pdir_size = pdir_size = (iova_space_size/IOVP_SIZE) * sizeof(u64);
1563
1564         DBG_INIT("%s() hpa 0x%lx mem %ldMB IOV %dMB (%d bits)\n",
1565                         __FUNCTION__,
1566                         ioc->ioc_hpa,
1567                         (unsigned long) num_physpages >> (20 - PAGE_SHIFT),
1568                         iova_space_size>>20,
1569                         iov_order + PAGE_SHIFT);
1570
1571         ioc->pdir_base = sba_alloc_pdir(pdir_size);
1572
1573         DBG_INIT("%s() pdir %p size %x\n",
1574                         __FUNCTION__, ioc->pdir_base, pdir_size);
1575
1576 #ifdef SBA_HINT_SUPPORT
1577         /* FIXME : DMA HINTs not used */
1578         ioc->hint_shift_pdir = iov_order + PAGE_SHIFT;
1579         ioc->hint_mask_pdir = ~(0x3 << (iov_order + PAGE_SHIFT));
1580
1581         DBG_INIT("      hint_shift_pdir %x hint_mask_pdir %lx\n",
1582                         ioc->hint_shift_pdir, ioc->hint_mask_pdir);
1583 #endif
1584
1585         WRITE_REG64(virt_to_phys(ioc->pdir_base), ioc->ioc_hpa + IOC_PDIR_BASE);
1586
1587         /* build IMASK for IOC and Elroy */
1588         iova_space_mask =  0xffffffff;
1589         iova_space_mask <<= (iov_order + PAGE_SHIFT);
1590
1591         /*
1592         ** On C3000 w/512MB mem, HP-UX 10.20 reports:
1593         **     ibase=0, imask=0xFE000000, size=0x2000000.
1594         */
1595         ioc->ibase = 0;
1596         ioc->imask = iova_space_mask;   /* save it */
1597 #ifdef ZX1_SUPPORT
1598         ioc->iovp_mask = ~(iova_space_mask + PAGE_SIZE - 1);
1599 #endif
1600
1601         DBG_INIT("%s() IOV base 0x%lx mask 0x%0lx\n",
1602                 __FUNCTION__, ioc->ibase, ioc->imask);
1603
1604         /*
1605         ** FIXME: Hint registers are programmed with default hint
1606         ** values during boot, so hints should be sane even if we
1607         ** can't reprogram them the way drivers want.
1608         */
1609
1610         setup_ibase_imask(sba, ioc, ioc_num);
1611
1612         /*
1613         ** Program the IOC's ibase and enable IOVA translation
1614         */
1615         WRITE_REG(ioc->ibase | 1, ioc->ioc_hpa+IOC_IBASE);
1616         WRITE_REG(ioc->imask, ioc->ioc_hpa+IOC_IMASK);
1617
1618         /* Set I/O PDIR Page size to 4K */
1619         WRITE_REG(0, ioc->ioc_hpa+IOC_TCNFG);
1620
1621         /*
1622         ** Clear I/O TLB of any possible entries.
1623         ** (Yes. This is a bit paranoid...but so what)
1624         */
1625         WRITE_REG(0 | 31, ioc->ioc_hpa+IOC_PCOM);
1626
1627         ioc->ibase = 0; /* used by SBA_IOVA and related macros */       
1628
1629         DBG_INIT("%s() DONE\n", __FUNCTION__);
1630 }
1631
1632
1633
1634 /**************************************************************************
1635 **
1636 **   SBA initialization code (HW and SW)
1637 **
1638 **   o identify SBA chip itself
1639 **   o initialize SBA chip modes (HardFail)
1640 **   o initialize SBA chip modes (HardFail)
1641 **   o FIXME: initialize DMA hints for reasonable defaults
1642 **
1643 **************************************************************************/
1644
1645 static void __iomem *ioc_remap(struct sba_device *sba_dev, int offset)
1646 {
1647         return ioremap(sba_dev->dev->hpa.start + offset, SBA_FUNC_SIZE);
1648 }
1649
1650 static void sba_hw_init(struct sba_device *sba_dev)
1651
1652         int i;
1653         int num_ioc;
1654         u64 ioc_ctl;
1655
1656         if (!is_pdc_pat()) {
1657                 /* Shutdown the USB controller on Astro-based workstations.
1658                 ** Once we reprogram the IOMMU, the next DMA performed by
1659                 ** USB will HPMC the box. USB is only enabled if a
1660                 ** keyboard is present and found.
1661                 **
1662                 ** With serial console, j6k v5.0 firmware says:
1663                 **   mem_kbd hpa 0xfee003f8 sba 0x0 pad 0x0 cl_class 0x7
1664                 **
1665                 ** FIXME: Using GFX+USB console at power up but direct
1666                 **      linux to serial console is still broken.
1667                 **      USB could generate DMA so we must reset USB.
1668                 **      The proper sequence would be:
1669                 **      o block console output
1670                 **      o reset USB device
1671                 **      o reprogram serial port
1672                 **      o unblock console output
1673                 */
1674                 if (PAGE0->mem_kbd.cl_class == CL_KEYBD) {
1675                         pdc_io_reset_devices();
1676                 }
1677
1678         }
1679
1680
1681 #if 0
1682 printk("sba_hw_init(): mem_boot 0x%x 0x%x 0x%x 0x%x\n", PAGE0->mem_boot.hpa,
1683         PAGE0->mem_boot.spa, PAGE0->mem_boot.pad, PAGE0->mem_boot.cl_class);
1684
1685         /*
1686         ** Need to deal with DMA from LAN.
1687         **      Maybe use page zero boot device as a handle to talk
1688         **      to PDC about which device to shutdown.
1689         **
1690         ** Netbooting, j6k v5.0 firmware says:
1691         **      mem_boot hpa 0xf4008000 sba 0x0 pad 0x0 cl_class 0x1002
1692         ** ARGH! invalid class.
1693         */
1694         if ((PAGE0->mem_boot.cl_class != CL_RANDOM)
1695                 && (PAGE0->mem_boot.cl_class != CL_SEQU)) {
1696                         pdc_io_reset();
1697         }
1698 #endif
1699
1700         if (!IS_PLUTO(sba_dev->iodc)) {
1701                 ioc_ctl = READ_REG(sba_dev->sba_hpa+IOC_CTRL);
1702                 DBG_INIT("%s() hpa 0x%lx ioc_ctl 0x%Lx ->",
1703                         __FUNCTION__, sba_dev->sba_hpa, ioc_ctl);
1704                 ioc_ctl &= ~(IOC_CTRL_RM | IOC_CTRL_NC | IOC_CTRL_CE);
1705                 ioc_ctl |= IOC_CTRL_DD | IOC_CTRL_D4 | IOC_CTRL_TC;
1706                         /* j6700 v1.6 firmware sets 0x294f */
1707                         /* A500 firmware sets 0x4d */
1708
1709                 WRITE_REG(ioc_ctl, sba_dev->sba_hpa+IOC_CTRL);
1710
1711 #ifdef DEBUG_SBA_INIT
1712                 ioc_ctl = READ_REG64(sba_dev->sba_hpa+IOC_CTRL);
1713                 DBG_INIT(" 0x%Lx\n", ioc_ctl);
1714 #endif
1715         } /* if !PLUTO */
1716
1717         if (IS_ASTRO(sba_dev->iodc)) {
1718                 int err;
1719                 /* PAT_PDC (L-class) also reports the same goofy base */
1720                 sba_dev->ioc[0].ioc_hpa = ioc_remap(sba_dev, ASTRO_IOC_OFFSET);
1721                 num_ioc = 1;
1722
1723                 sba_dev->chip_resv.name = "Astro Intr Ack";
1724                 sba_dev->chip_resv.start = PCI_F_EXTEND | 0xfef00000UL;
1725                 sba_dev->chip_resv.end   = PCI_F_EXTEND | (0xff000000UL - 1) ;
1726                 err = request_resource(&iomem_resource, &(sba_dev->chip_resv));
1727                 if (err < 0) {
1728                         BUG();
1729                 }
1730
1731         } else if (IS_PLUTO(sba_dev->iodc)) {
1732                 int err;
1733
1734                 /* We use a negative value for IOC HPA so it gets 
1735                  * corrected when we add it with IKE's IOC offset.
1736                  * Doesnt look clean, but fewer code. 
1737                  */
1738                 sba_dev->ioc[0].ioc_hpa = ioc_remap(sba_dev, PLUTO_IOC_OFFSET);
1739                 num_ioc = 1;
1740
1741                 sba_dev->chip_resv.name = "Pluto Intr/PIOP/VGA";
1742                 sba_dev->chip_resv.start = PCI_F_EXTEND | 0xfee00000UL;
1743                 sba_dev->chip_resv.end   = PCI_F_EXTEND | (0xff200000UL - 1);
1744                 err = request_resource(&iomem_resource, &(sba_dev->chip_resv));
1745                 WARN_ON(err < 0);
1746
1747                 sba_dev->iommu_resv.name = "IOVA Space";
1748                 sba_dev->iommu_resv.start = 0x40000000UL;
1749                 sba_dev->iommu_resv.end   = 0x50000000UL - 1;
1750                 err = request_resource(&iomem_resource, &(sba_dev->iommu_resv));
1751                 WARN_ON(err < 0);
1752         } else {
1753                 /* IS_IKE (ie N-class, L3000, L1500) */
1754                 sba_dev->ioc[0].ioc_hpa = ioc_remap(sba_dev, IKE_IOC_OFFSET(0));
1755                 sba_dev->ioc[1].ioc_hpa = ioc_remap(sba_dev, IKE_IOC_OFFSET(1));
1756                 num_ioc = 2;
1757
1758                 /* TODO - LOOKUP Ike/Stretch chipset mem map */
1759         }
1760         /* XXX: What about Reo? */
1761
1762         sba_dev->num_ioc = num_ioc;
1763         for (i = 0; i < num_ioc; i++) {
1764                 /*
1765                 ** Make sure the box crashes if we get any errors on a rope.
1766                 */
1767                 WRITE_REG(HF_ENABLE, sba_dev->ioc[i].ioc_hpa + ROPE0_CTL);
1768                 WRITE_REG(HF_ENABLE, sba_dev->ioc[i].ioc_hpa + ROPE1_CTL);
1769                 WRITE_REG(HF_ENABLE, sba_dev->ioc[i].ioc_hpa + ROPE2_CTL);
1770                 WRITE_REG(HF_ENABLE, sba_dev->ioc[i].ioc_hpa + ROPE3_CTL);
1771                 WRITE_REG(HF_ENABLE, sba_dev->ioc[i].ioc_hpa + ROPE4_CTL);
1772                 WRITE_REG(HF_ENABLE, sba_dev->ioc[i].ioc_hpa + ROPE5_CTL);
1773                 WRITE_REG(HF_ENABLE, sba_dev->ioc[i].ioc_hpa + ROPE6_CTL);
1774                 WRITE_REG(HF_ENABLE, sba_dev->ioc[i].ioc_hpa + ROPE7_CTL);
1775
1776                 /* flush out the writes */
1777                 READ_REG(sba_dev->ioc[i].ioc_hpa + ROPE7_CTL);
1778
1779                 DBG_INIT("      ioc[%d] ROPE_CFG 0x%Lx  ROPE_DBG 0x%Lx\n",
1780                                 i,
1781                                 READ_REG(sba_dev->ioc[i].ioc_hpa + 0x40),
1782                                 READ_REG(sba_dev->ioc[i].ioc_hpa + 0x50)
1783                         );
1784                 DBG_INIT("      STATUS_CONTROL 0x%Lx  FLUSH_CTRL 0x%Lx\n",
1785                                 READ_REG(sba_dev->ioc[i].ioc_hpa + 0x108),
1786                                 READ_REG(sba_dev->ioc[i].ioc_hpa + 0x400)
1787                         );
1788
1789                 if (IS_PLUTO(sba_dev->iodc)) {
1790                         sba_ioc_init_pluto(sba_dev->dev, &(sba_dev->ioc[i]), i);
1791                 } else {
1792                         sba_ioc_init(sba_dev->dev, &(sba_dev->ioc[i]), i);
1793                 }
1794         }
1795 }
1796
1797 static void
1798 sba_common_init(struct sba_device *sba_dev)
1799 {
1800         int i;
1801
1802         /* add this one to the head of the list (order doesn't matter)
1803         ** This will be useful for debugging - especially if we get coredumps
1804         */
1805         sba_dev->next = sba_list;
1806         sba_list = sba_dev;
1807
1808         for(i=0; i< sba_dev->num_ioc; i++) {
1809                 int res_size;
1810 #ifdef DEBUG_DMB_TRAP
1811                 extern void iterate_pages(unsigned long , unsigned long ,
1812                                           void (*)(pte_t * , unsigned long),
1813                                           unsigned long );
1814                 void set_data_memory_break(pte_t * , unsigned long);
1815 #endif
1816                 /* resource map size dictated by pdir_size */
1817                 res_size = sba_dev->ioc[i].pdir_size/sizeof(u64); /* entries */
1818
1819                 /* Second part of PIRANHA BUG */
1820                 if (piranha_bad_128k) {
1821                         res_size -= (128*1024)/sizeof(u64);
1822                 }
1823
1824                 res_size >>= 3;  /* convert bit count to byte count */
1825                 DBG_INIT("%s() res_size 0x%x\n",
1826                         __FUNCTION__, res_size);
1827
1828                 sba_dev->ioc[i].res_size = res_size;
1829                 sba_dev->ioc[i].res_map = (char *) __get_free_pages(GFP_KERNEL, get_order(res_size));
1830
1831 #ifdef DEBUG_DMB_TRAP
1832                 iterate_pages( sba_dev->ioc[i].res_map, res_size,
1833                                 set_data_memory_break, 0);
1834 #endif
1835
1836                 if (NULL == sba_dev->ioc[i].res_map)
1837                 {
1838                         panic("%s:%s() could not allocate resource map\n",
1839                               __FILE__, __FUNCTION__ );
1840                 }
1841
1842                 memset(sba_dev->ioc[i].res_map, 0, res_size);
1843                 /* next available IOVP - circular search */
1844                 sba_dev->ioc[i].res_hint = (unsigned long *)
1845                                 &(sba_dev->ioc[i].res_map[L1_CACHE_BYTES]);
1846
1847 #ifdef ASSERT_PDIR_SANITY
1848                 /* Mark first bit busy - ie no IOVA 0 */
1849                 sba_dev->ioc[i].res_map[0] = 0x80;
1850                 sba_dev->ioc[i].pdir_base[0] = 0xeeffc0addbba0080ULL;
1851 #endif
1852
1853                 /* Third (and last) part of PIRANHA BUG */
1854                 if (piranha_bad_128k) {
1855                         /* region from +1408K to +1536 is un-usable. */
1856
1857                         int idx_start = (1408*1024/sizeof(u64)) >> 3;
1858                         int idx_end   = (1536*1024/sizeof(u64)) >> 3;
1859                         long *p_start = (long *) &(sba_dev->ioc[i].res_map[idx_start]);
1860                         long *p_end   = (long *) &(sba_dev->ioc[i].res_map[idx_end]);
1861
1862                         /* mark that part of the io pdir busy */
1863                         while (p_start < p_end)
1864                                 *p_start++ = -1;
1865                                 
1866                 }
1867
1868 #ifdef DEBUG_DMB_TRAP
1869                 iterate_pages( sba_dev->ioc[i].res_map, res_size,
1870                                 set_data_memory_break, 0);
1871                 iterate_pages( sba_dev->ioc[i].pdir_base, sba_dev->ioc[i].pdir_size,
1872                                 set_data_memory_break, 0);
1873 #endif
1874
1875                 DBG_INIT("%s() %d res_map %x %p\n",
1876                         __FUNCTION__, i, res_size, sba_dev->ioc[i].res_map);
1877         }
1878
1879         spin_lock_init(&sba_dev->sba_lock);
1880         ioc_needs_fdc = boot_cpu_data.pdc.capabilities & PDC_MODEL_IOPDIR_FDC;
1881
1882 #ifdef DEBUG_SBA_INIT
1883         /*
1884          * If the PDC_MODEL capabilities has Non-coherent IO-PDIR bit set
1885          * (bit #61, big endian), we have to flush and sync every time
1886          * IO-PDIR is changed in Ike/Astro.
1887          */
1888         if (boot_cpu_data.pdc.capabilities & PDC_MODEL_IOPDIR_FDC) {
1889                 printk(KERN_INFO MODULE_NAME " FDC/SYNC required.\n");
1890         } else {
1891                 printk(KERN_INFO MODULE_NAME " IOC has cache coherent PDIR.\n");
1892         }
1893 #endif
1894 }
1895
1896 #ifdef CONFIG_PROC_FS
1897 static int sba_proc_info(struct seq_file *m, void *p)
1898 {
1899         struct sba_device *sba_dev = sba_list;
1900         struct ioc *ioc = &sba_dev->ioc[0];     /* FIXME: Multi-IOC support! */
1901         int total_pages = (int) (ioc->res_size << 3); /* 8 bits per byte */
1902 #ifdef SBA_COLLECT_STATS
1903         unsigned long avg = 0, min, max;
1904 #endif
1905         int i, len = 0;
1906
1907         len += seq_printf(m, "%s rev %d.%d\n",
1908                 sba_dev->name,
1909                 (sba_dev->hw_rev & 0x7) + 1,
1910                 (sba_dev->hw_rev & 0x18) >> 3
1911                 );
1912         len += seq_printf(m, "IO PDIR size    : %d bytes (%d entries)\n",
1913                 (int) ((ioc->res_size << 3) * sizeof(u64)), /* 8 bits/byte */
1914                 total_pages);
1915
1916         len += seq_printf(m, "Resource bitmap : %d bytes (%d pages)\n", 
1917                 ioc->res_size, ioc->res_size << 3);   /* 8 bits per byte */
1918
1919         len += seq_printf(m, "LMMIO_BASE/MASK/ROUTE %08x %08x %08x\n",
1920                 READ_REG32(sba_dev->sba_hpa + LMMIO_DIST_BASE),
1921                 READ_REG32(sba_dev->sba_hpa + LMMIO_DIST_MASK),
1922                 READ_REG32(sba_dev->sba_hpa + LMMIO_DIST_ROUTE)
1923                 );
1924
1925         for (i=0; i<4; i++)
1926                 len += seq_printf(m, "DIR%d_BASE/MASK/ROUTE %08x %08x %08x\n", i,
1927                         READ_REG32(sba_dev->sba_hpa + LMMIO_DIRECT0_BASE  + i*0x18),
1928                         READ_REG32(sba_dev->sba_hpa + LMMIO_DIRECT0_MASK  + i*0x18),
1929                         READ_REG32(sba_dev->sba_hpa + LMMIO_DIRECT0_ROUTE + i*0x18)
1930                 );
1931
1932 #ifdef SBA_COLLECT_STATS
1933         len += seq_printf(m, "IO PDIR entries : %ld free  %ld used (%d%%)\n",
1934                 total_pages - ioc->used_pages, ioc->used_pages,
1935                 (int) (ioc->used_pages * 100 / total_pages));
1936
1937         min = max = ioc->avg_search[0];
1938         for (i = 0; i < SBA_SEARCH_SAMPLE; i++) {
1939                 avg += ioc->avg_search[i];
1940                 if (ioc->avg_search[i] > max) max = ioc->avg_search[i];
1941                 if (ioc->avg_search[i] < min) min = ioc->avg_search[i];
1942         }
1943         avg /= SBA_SEARCH_SAMPLE;
1944         len += seq_printf(m, "  Bitmap search : %ld/%ld/%ld (min/avg/max CPU Cycles)\n",
1945                 min, avg, max);
1946
1947         len += seq_printf(m, "pci_map_single(): %12ld calls  %12ld pages (avg %d/1000)\n",
1948                 ioc->msingle_calls, ioc->msingle_pages,
1949                 (int) ((ioc->msingle_pages * 1000)/ioc->msingle_calls));
1950
1951         /* KLUGE - unmap_sg calls unmap_single for each mapped page */
1952         min = ioc->usingle_calls;
1953         max = ioc->usingle_pages - ioc->usg_pages;
1954         len += seq_printf(m, "pci_unmap_single: %12ld calls  %12ld pages (avg %d/1000)\n",
1955                 min, max, (int) ((max * 1000)/min));
1956
1957         len += seq_printf(m, "pci_map_sg()    : %12ld calls  %12ld pages (avg %d/1000)\n",
1958                 ioc->msg_calls, ioc->msg_pages, 
1959                 (int) ((ioc->msg_pages * 1000)/ioc->msg_calls));
1960
1961         len += seq_printf(m, "pci_unmap_sg()  : %12ld calls  %12ld pages (avg %d/1000)\n",
1962                 ioc->usg_calls, ioc->usg_pages,
1963                 (int) ((ioc->usg_pages * 1000)/ioc->usg_calls));
1964 #endif
1965
1966         return 0;
1967 }
1968
1969 static int
1970 sba_proc_open(struct inode *i, struct file *f)
1971 {
1972         return single_open(f, &sba_proc_info, NULL);
1973 }
1974
1975 static struct file_operations sba_proc_fops = {
1976         .owner = THIS_MODULE,
1977         .open = sba_proc_open,
1978         .read = seq_read,
1979         .llseek = seq_lseek,
1980         .release = single_release,
1981 };
1982
1983 static int
1984 sba_proc_bitmap_info(struct seq_file *m, void *p)
1985 {
1986         struct sba_device *sba_dev = sba_list;
1987         struct ioc *ioc = &sba_dev->ioc[0];     /* FIXME: Multi-IOC support! */
1988         unsigned int *res_ptr = (unsigned int *)ioc->res_map;
1989         int i, len = 0;
1990
1991         for (i = 0; i < (ioc->res_size/sizeof(unsigned int)); ++i, ++res_ptr) {
1992                 if ((i & 7) == 0)
1993                         len += seq_printf(m, "\n   ");
1994                 len += seq_printf(m, " %08x", *res_ptr);
1995         }
1996         len += seq_printf(m, "\n");
1997
1998         return 0;
1999 }
2000
2001 static int
2002 sba_proc_bitmap_open(struct inode *i, struct file *f)
2003 {
2004         return single_open(f, &sba_proc_bitmap_info, NULL);
2005 }
2006
2007 static struct file_operations sba_proc_bitmap_fops = {
2008         .owner = THIS_MODULE,
2009         .open = sba_proc_bitmap_open,
2010         .read = seq_read,
2011         .llseek = seq_lseek,
2012         .release = single_release,
2013 };
2014 #endif /* CONFIG_PROC_FS */
2015
2016 static struct parisc_device_id sba_tbl[] = {
2017         { HPHW_IOA, HVERSION_REV_ANY_ID, ASTRO_RUNWAY_PORT, 0xb },
2018         { HPHW_BCPORT, HVERSION_REV_ANY_ID, IKE_MERCED_PORT, 0xc },
2019         { HPHW_BCPORT, HVERSION_REV_ANY_ID, REO_MERCED_PORT, 0xc },
2020         { HPHW_BCPORT, HVERSION_REV_ANY_ID, REOG_MERCED_PORT, 0xc },
2021         { HPHW_IOA, HVERSION_REV_ANY_ID, PLUTO_MCKINLEY_PORT, 0xc },
2022         { 0, }
2023 };
2024
2025 int sba_driver_callback(struct parisc_device *);
2026
2027 static struct parisc_driver sba_driver = {
2028         .name =         MODULE_NAME,
2029         .id_table =     sba_tbl,
2030         .probe =        sba_driver_callback,
2031 };
2032
2033 /*
2034 ** Determine if sba should claim this chip (return 0) or not (return 1).
2035 ** If so, initialize the chip and tell other partners in crime they
2036 ** have work to do.
2037 */
2038 int
2039 sba_driver_callback(struct parisc_device *dev)
2040 {
2041         struct sba_device *sba_dev;
2042         u32 func_class;
2043         int i;
2044         char *version;
2045         void __iomem *sba_addr = ioremap(dev->hpa.start, SBA_FUNC_SIZE);
2046         struct proc_dir_entry *info_entry, *bitmap_entry, *root;
2047
2048         sba_dump_ranges(sba_addr);
2049
2050         /* Read HW Rev First */
2051         func_class = READ_REG(sba_addr + SBA_FCLASS);
2052
2053         if (IS_ASTRO(&dev->id)) {
2054                 unsigned long fclass;
2055                 static char astro_rev[]="Astro ?.?";
2056
2057                 /* Astro is broken...Read HW Rev First */
2058                 fclass = READ_REG(sba_addr);
2059
2060                 astro_rev[6] = '1' + (char) (fclass & 0x7);
2061                 astro_rev[8] = '0' + (char) ((fclass & 0x18) >> 3);
2062                 version = astro_rev;
2063
2064         } else if (IS_IKE(&dev->id)) {
2065                 static char ike_rev[] = "Ike rev ?";
2066                 ike_rev[8] = '0' + (char) (func_class & 0xff);
2067                 version = ike_rev;
2068         } else if (IS_PLUTO(&dev->id)) {
2069                 static char pluto_rev[]="Pluto ?.?";
2070                 pluto_rev[6] = '0' + (char) ((func_class & 0xf0) >> 4); 
2071                 pluto_rev[8] = '0' + (char) (func_class & 0x0f); 
2072                 version = pluto_rev;
2073         } else {
2074                 static char reo_rev[] = "REO rev ?";
2075                 reo_rev[8] = '0' + (char) (func_class & 0xff);
2076                 version = reo_rev;
2077         }
2078
2079         if (!global_ioc_cnt) {
2080                 global_ioc_cnt = count_parisc_driver(&sba_driver);
2081
2082                 /* Astro and Pluto have one IOC per SBA */
2083                 if ((!IS_ASTRO(&dev->id)) || (!IS_PLUTO(&dev->id)))
2084                         global_ioc_cnt *= 2;
2085         }
2086
2087         printk(KERN_INFO "%s found %s at 0x%lx\n",
2088                 MODULE_NAME, version, dev->hpa.start);
2089
2090         sba_dev = kzalloc(sizeof(struct sba_device), GFP_KERNEL);
2091         if (!sba_dev) {
2092                 printk(KERN_ERR MODULE_NAME " - couldn't alloc sba_device\n");
2093                 return -ENOMEM;
2094         }
2095
2096         parisc_set_drvdata(dev, sba_dev);
2097
2098         for(i=0; i<MAX_IOC; i++)
2099                 spin_lock_init(&(sba_dev->ioc[i].res_lock));
2100
2101         sba_dev->dev = dev;
2102         sba_dev->hw_rev = func_class;
2103         sba_dev->iodc = &dev->id;
2104         sba_dev->name = dev->name;
2105         sba_dev->sba_hpa = sba_addr;
2106
2107         sba_get_pat_resources(sba_dev);
2108         sba_hw_init(sba_dev);
2109         sba_common_init(sba_dev);
2110
2111         hppa_dma_ops = &sba_ops;
2112
2113 #ifdef CONFIG_PROC_FS
2114         switch (dev->id.hversion) {
2115         case PLUTO_MCKINLEY_PORT:
2116                 root = proc_mckinley_root;
2117                 break;
2118         case ASTRO_RUNWAY_PORT:
2119         case IKE_MERCED_PORT:
2120         default:
2121                 root = proc_runway_root;
2122                 break;
2123         }
2124
2125         info_entry = create_proc_entry("sba_iommu", 0, root);
2126         bitmap_entry = create_proc_entry("sba_iommu-bitmap", 0, root);
2127
2128         if (info_entry)
2129                 info_entry->proc_fops = &sba_proc_fops;
2130
2131         if (bitmap_entry)
2132                 bitmap_entry->proc_fops = &sba_proc_bitmap_fops;
2133 #endif
2134
2135         parisc_vmerge_boundary = IOVP_SIZE;
2136         parisc_vmerge_max_size = IOVP_SIZE * BITS_PER_LONG;
2137         parisc_has_iommu();
2138         return 0;
2139 }
2140
2141 /*
2142 ** One time initialization to let the world know the SBA was found.
2143 ** This is the only routine which is NOT static.
2144 ** Must be called exactly once before pci_init().
2145 */
2146 void __init sba_init(void)
2147 {
2148         register_parisc_driver(&sba_driver);
2149 }
2150
2151
2152 /**
2153  * sba_get_iommu - Assign the iommu pointer for the pci bus controller.
2154  * @dev: The parisc device.
2155  *
2156  * Returns the appropriate IOMMU data for the given parisc PCI controller.
2157  * This is cached and used later for PCI DMA Mapping.
2158  */
2159 void * sba_get_iommu(struct parisc_device *pci_hba)
2160 {
2161         struct parisc_device *sba_dev = parisc_parent(pci_hba);
2162         struct sba_device *sba = sba_dev->dev.driver_data;
2163         char t = sba_dev->id.hw_type;
2164         int iocnum = (pci_hba->hw_path >> 3);   /* rope # */
2165
2166         WARN_ON((t != HPHW_IOA) && (t != HPHW_BCPORT));
2167
2168         return &(sba->ioc[iocnum]);
2169 }
2170
2171
2172 /**
2173  * sba_directed_lmmio - return first directed LMMIO range routed to rope
2174  * @pa_dev: The parisc device.
2175  * @r: resource PCI host controller wants start/end fields assigned.
2176  *
2177  * For the given parisc PCI controller, determine if any direct ranges
2178  * are routed down the corresponding rope.
2179  */
2180 void sba_directed_lmmio(struct parisc_device *pci_hba, struct resource *r)
2181 {
2182         struct parisc_device *sba_dev = parisc_parent(pci_hba);
2183         struct sba_device *sba = sba_dev->dev.driver_data;
2184         char t = sba_dev->id.hw_type;
2185         int i;
2186         int rope = (pci_hba->hw_path & (ROPES_PER_IOC-1));  /* rope # */
2187
2188         if ((t!=HPHW_IOA) && (t!=HPHW_BCPORT))
2189                 BUG();
2190
2191         r->start = r->end = 0;
2192
2193         /* Astro has 4 directed ranges. Not sure about Ike/Pluto/et al */
2194         for (i=0; i<4; i++) {
2195                 int base, size;
2196                 void __iomem *reg = sba->sba_hpa + i*0x18;
2197
2198                 base = READ_REG32(reg + LMMIO_DIRECT0_BASE);
2199                 if ((base & 1) == 0)
2200                         continue;       /* not enabled */
2201
2202                 size = READ_REG32(reg + LMMIO_DIRECT0_ROUTE);
2203
2204                 if ((size & (ROPES_PER_IOC-1)) != rope)
2205                         continue;       /* directed down different rope */
2206                 
2207                 r->start = (base & ~1UL) | PCI_F_EXTEND;
2208                 size = ~ READ_REG32(reg + LMMIO_DIRECT0_MASK);
2209                 r->end = r->start + size;
2210         }
2211 }
2212
2213
2214 /**
2215  * sba_distributed_lmmio - return portion of distributed LMMIO range
2216  * @pa_dev: The parisc device.
2217  * @r: resource PCI host controller wants start/end fields assigned.
2218  *
2219  * For the given parisc PCI controller, return portion of distributed LMMIO
2220  * range. The distributed LMMIO is always present and it's just a question
2221  * of the base address and size of the range.
2222  */
2223 void sba_distributed_lmmio(struct parisc_device *pci_hba, struct resource *r )
2224 {
2225         struct parisc_device *sba_dev = parisc_parent(pci_hba);
2226         struct sba_device *sba = sba_dev->dev.driver_data;
2227         char t = sba_dev->id.hw_type;
2228         int base, size;
2229         int rope = (pci_hba->hw_path & (ROPES_PER_IOC-1));  /* rope # */
2230
2231         if ((t!=HPHW_IOA) && (t!=HPHW_BCPORT))
2232                 BUG();
2233
2234         r->start = r->end = 0;
2235
2236         base = READ_REG32(sba->sba_hpa + LMMIO_DIST_BASE);
2237         if ((base & 1) == 0) {
2238                 BUG();  /* Gah! Distr Range wasn't enabled! */
2239                 return;
2240         }
2241
2242         r->start = (base & ~1UL) | PCI_F_EXTEND;
2243
2244         size = (~READ_REG32(sba->sba_hpa + LMMIO_DIST_MASK)) / ROPES_PER_IOC;
2245         r->start += rope * (size + 1);  /* adjust base for this rope */
2246         r->end = r->start + size;
2247 }