phy: Add LSI ET1011C PHY driver
[pandora-kernel.git] / drivers / net / yellowfin.c
1 /* yellowfin.c: A Packet Engines G-NIC ethernet driver for linux. */
2 /*
3         Written 1997-2001 by Donald Becker.
4
5         This software may be used and distributed according to the terms of
6         the GNU General Public License (GPL), incorporated herein by reference.
7         Drivers based on or derived from this code fall under the GPL and must
8         retain the authorship, copyright and license notice.  This file is not
9         a complete program and may only be used when the entire operating
10         system is licensed under the GPL.
11
12         This driver is for the Packet Engines G-NIC PCI Gigabit Ethernet adapter.
13         It also supports the Symbios Logic version of the same chip core.
14
15         The author may be reached as becker@scyld.com, or C/O
16         Scyld Computing Corporation
17         410 Severn Ave., Suite 210
18         Annapolis MD 21403
19
20         Support and updates available at
21         http://www.scyld.com/network/yellowfin.html
22         [link no longer provides useful info -jgarzik]
23
24 */
25
26 #define DRV_NAME        "yellowfin"
27 #define DRV_VERSION     "2.1"
28 #define DRV_RELDATE     "Sep 11, 2006"
29
30 #define PFX DRV_NAME ": "
31
32 /* The user-configurable values.
33    These may be modified when a driver module is loaded.*/
34
35 static int debug = 1;                   /* 1 normal messages, 0 quiet .. 7 verbose. */
36 /* Maximum events (Rx packets, etc.) to handle at each interrupt. */
37 static int max_interrupt_work = 20;
38 static int mtu;
39 #ifdef YF_PROTOTYPE                     /* Support for prototype hardware errata. */
40 /* System-wide count of bogus-rx frames. */
41 static int bogus_rx;
42 static int dma_ctrl = 0x004A0263;                       /* Constrained by errata */
43 static int fifo_cfg = 0x0020;                           /* Bypass external Tx FIFO. */
44 #elif defined(YF_NEW)                                   /* A future perfect board :->.  */
45 static int dma_ctrl = 0x00CAC277;                       /* Override when loading module! */
46 static int fifo_cfg = 0x0028;
47 #else
48 static const int dma_ctrl = 0x004A0263;                         /* Constrained by errata */
49 static const int fifo_cfg = 0x0020;                             /* Bypass external Tx FIFO. */
50 #endif
51
52 /* Set the copy breakpoint for the copy-only-tiny-frames scheme.
53    Setting to > 1514 effectively disables this feature. */
54 static int rx_copybreak;
55
56 /* Used to pass the media type, etc.
57    No media types are currently defined.  These exist for driver
58    interoperability.
59 */
60 #define MAX_UNITS 8                             /* More are supported, limit only on options */
61 static int options[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
62 static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
63
64 /* Do ugly workaround for GX server chipset errata. */
65 static int gx_fix;
66
67 /* Operational parameters that are set at compile time. */
68
69 /* Keep the ring sizes a power of two for efficiency.
70    Making the Tx ring too long decreases the effectiveness of channel
71    bonding and packet priority.
72    There are no ill effects from too-large receive rings. */
73 #define TX_RING_SIZE    16
74 #define TX_QUEUE_SIZE   12              /* Must be > 4 && <= TX_RING_SIZE */
75 #define RX_RING_SIZE    64
76 #define STATUS_TOTAL_SIZE       TX_RING_SIZE*sizeof(struct tx_status_words)
77 #define TX_TOTAL_SIZE           2*TX_RING_SIZE*sizeof(struct yellowfin_desc)
78 #define RX_TOTAL_SIZE           RX_RING_SIZE*sizeof(struct yellowfin_desc)
79
80 /* Operational parameters that usually are not changed. */
81 /* Time in jiffies before concluding the transmitter is hung. */
82 #define TX_TIMEOUT  (2*HZ)
83 #define PKT_BUF_SZ              1536                    /* Size of each temporary Rx buffer.*/
84
85 #define yellowfin_debug debug
86
87 #include <linux/module.h>
88 #include <linux/kernel.h>
89 #include <linux/string.h>
90 #include <linux/timer.h>
91 #include <linux/errno.h>
92 #include <linux/ioport.h>
93 #include <linux/slab.h>
94 #include <linux/interrupt.h>
95 #include <linux/pci.h>
96 #include <linux/init.h>
97 #include <linux/mii.h>
98 #include <linux/netdevice.h>
99 #include <linux/etherdevice.h>
100 #include <linux/skbuff.h>
101 #include <linux/ethtool.h>
102 #include <linux/crc32.h>
103 #include <linux/bitops.h>
104 #include <asm/uaccess.h>
105 #include <asm/processor.h>              /* Processor type for cache alignment. */
106 #include <asm/unaligned.h>
107 #include <asm/io.h>
108
109 /* These identify the driver base version and may not be removed. */
110 static char version[] __devinitdata =
111 KERN_INFO DRV_NAME ".c:v1.05  1/09/2001  Written by Donald Becker <becker@scyld.com>\n"
112 KERN_INFO "  (unofficial 2.4.x port, " DRV_VERSION ", " DRV_RELDATE ")\n";
113
114 MODULE_AUTHOR("Donald Becker <becker@scyld.com>");
115 MODULE_DESCRIPTION("Packet Engines Yellowfin G-NIC Gigabit Ethernet driver");
116 MODULE_LICENSE("GPL");
117
118 module_param(max_interrupt_work, int, 0);
119 module_param(mtu, int, 0);
120 module_param(debug, int, 0);
121 module_param(rx_copybreak, int, 0);
122 module_param_array(options, int, NULL, 0);
123 module_param_array(full_duplex, int, NULL, 0);
124 module_param(gx_fix, int, 0);
125 MODULE_PARM_DESC(max_interrupt_work, "G-NIC maximum events handled per interrupt");
126 MODULE_PARM_DESC(mtu, "G-NIC MTU (all boards)");
127 MODULE_PARM_DESC(debug, "G-NIC debug level (0-7)");
128 MODULE_PARM_DESC(rx_copybreak, "G-NIC copy breakpoint for copy-only-tiny-frames");
129 MODULE_PARM_DESC(options, "G-NIC: Bits 0-3: media type, bit 17: full duplex");
130 MODULE_PARM_DESC(full_duplex, "G-NIC full duplex setting(s) (1)");
131 MODULE_PARM_DESC(gx_fix, "G-NIC: enable GX server chipset bug workaround (0-1)");
132
133 /*
134                                 Theory of Operation
135
136 I. Board Compatibility
137
138 This device driver is designed for the Packet Engines "Yellowfin" Gigabit
139 Ethernet adapter.  The G-NIC 64-bit PCI card is supported, as well as the
140 Symbios 53C885E dual function chip.
141
142 II. Board-specific settings
143
144 PCI bus devices are configured by the system at boot time, so no jumpers
145 need to be set on the board.  The system BIOS preferably should assign the
146 PCI INTA signal to an otherwise unused system IRQ line.
147 Note: Kernel versions earlier than 1.3.73 do not support shared PCI
148 interrupt lines.
149
150 III. Driver operation
151
152 IIIa. Ring buffers
153
154 The Yellowfin uses the Descriptor Based DMA Architecture specified by Apple.
155 This is a descriptor list scheme similar to that used by the EEPro100 and
156 Tulip.  This driver uses two statically allocated fixed-size descriptor lists
157 formed into rings by a branch from the final descriptor to the beginning of
158 the list.  The ring sizes are set at compile time by RX/TX_RING_SIZE.
159
160 The driver allocates full frame size skbuffs for the Rx ring buffers at
161 open() time and passes the skb->data field to the Yellowfin as receive data
162 buffers.  When an incoming frame is less than RX_COPYBREAK bytes long,
163 a fresh skbuff is allocated and the frame is copied to the new skbuff.
164 When the incoming frame is larger, the skbuff is passed directly up the
165 protocol stack and replaced by a newly allocated skbuff.
166
167 The RX_COPYBREAK value is chosen to trade-off the memory wasted by
168 using a full-sized skbuff for small frames vs. the copying costs of larger
169 frames.  For small frames the copying cost is negligible (esp. considering
170 that we are pre-loading the cache with immediately useful header
171 information).  For large frames the copying cost is non-trivial, and the
172 larger copy might flush the cache of useful data.
173
174 IIIC. Synchronization
175
176 The driver runs as two independent, single-threaded flows of control.  One
177 is the send-packet routine, which enforces single-threaded use by the
178 dev->tbusy flag.  The other thread is the interrupt handler, which is single
179 threaded by the hardware and other software.
180
181 The send packet thread has partial control over the Tx ring and 'dev->tbusy'
182 flag.  It sets the tbusy flag whenever it's queuing a Tx packet. If the next
183 queue slot is empty, it clears the tbusy flag when finished otherwise it sets
184 the 'yp->tx_full' flag.
185
186 The interrupt handler has exclusive control over the Rx ring and records stats
187 from the Tx ring.  After reaping the stats, it marks the Tx queue entry as
188 empty by incrementing the dirty_tx mark. Iff the 'yp->tx_full' flag is set, it
189 clears both the tx_full and tbusy flags.
190
191 IV. Notes
192
193 Thanks to Kim Stearns of Packet Engines for providing a pair of G-NIC boards.
194 Thanks to Bruce Faust of Digitalscape for providing both their SYM53C885 board
195 and an AlphaStation to verifty the Alpha port!
196
197 IVb. References
198
199 Yellowfin Engineering Design Specification, 4/23/97 Preliminary/Confidential
200 Symbios SYM53C885 PCI-SCSI/Fast Ethernet Multifunction Controller Preliminary
201    Data Manual v3.0
202 http://cesdis.gsfc.nasa.gov/linux/misc/NWay.html
203 http://cesdis.gsfc.nasa.gov/linux/misc/100mbps.html
204
205 IVc. Errata
206
207 See Packet Engines confidential appendix (prototype chips only).
208 */
209
210
211
212 enum capability_flags {
213         HasMII=1, FullTxStatus=2, IsGigabit=4, HasMulticastBug=8, FullRxStatus=16,
214         HasMACAddrBug=32, /* Only on early revs.  */
215         DontUseEeprom=64, /* Don't read the MAC from the EEPROm. */
216 };
217
218 /* The PCI I/O space extent. */
219 enum {
220         YELLOWFIN_SIZE  = 0x100,
221 };
222
223 struct pci_id_info {
224         const char *name;
225         struct match_info {
226                 int     pci, pci_mask, subsystem, subsystem_mask;
227                 int revision, revision_mask;                            /* Only 8 bits. */
228         } id;
229         int drv_flags;                          /* Driver use, intended as capability flags. */
230 };
231
232 static const struct pci_id_info pci_id_tbl[] = {
233         {"Yellowfin G-NIC Gigabit Ethernet", { 0x07021000, 0xffffffff},
234          FullTxStatus | IsGigabit | HasMulticastBug | HasMACAddrBug | DontUseEeprom},
235         {"Symbios SYM83C885", { 0x07011000, 0xffffffff},
236           HasMII | DontUseEeprom },
237         { }
238 };
239
240 static const struct pci_device_id yellowfin_pci_tbl[] = {
241         { 0x1000, 0x0702, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
242         { 0x1000, 0x0701, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 },
243         { }
244 };
245 MODULE_DEVICE_TABLE (pci, yellowfin_pci_tbl);
246
247
248 /* Offsets to the Yellowfin registers.  Various sizes and alignments. */
249 enum yellowfin_offsets {
250         TxCtrl=0x00, TxStatus=0x04, TxPtr=0x0C,
251         TxIntrSel=0x10, TxBranchSel=0x14, TxWaitSel=0x18,
252         RxCtrl=0x40, RxStatus=0x44, RxPtr=0x4C,
253         RxIntrSel=0x50, RxBranchSel=0x54, RxWaitSel=0x58,
254         EventStatus=0x80, IntrEnb=0x82, IntrClear=0x84, IntrStatus=0x86,
255         ChipRev=0x8C, DMACtrl=0x90, TxThreshold=0x94,
256         Cnfg=0xA0, FrameGap0=0xA2, FrameGap1=0xA4,
257         MII_Cmd=0xA6, MII_Addr=0xA8, MII_Wr_Data=0xAA, MII_Rd_Data=0xAC,
258         MII_Status=0xAE,
259         RxDepth=0xB8, FlowCtrl=0xBC,
260         AddrMode=0xD0, StnAddr=0xD2, HashTbl=0xD8, FIFOcfg=0xF8,
261         EEStatus=0xF0, EECtrl=0xF1, EEAddr=0xF2, EERead=0xF3, EEWrite=0xF4,
262         EEFeature=0xF5,
263 };
264
265 /* The Yellowfin Rx and Tx buffer descriptors.
266    Elements are written as 32 bit for endian portability. */
267 struct yellowfin_desc {
268         __le32 dbdma_cmd;
269         __le32 addr;
270         __le32 branch_addr;
271         __le32 result_status;
272 };
273
274 struct tx_status_words {
275 #ifdef __BIG_ENDIAN
276         u16 tx_errs;
277         u16 tx_cnt;
278         u16 paused;
279         u16 total_tx_cnt;
280 #else  /* Little endian chips. */
281         u16 tx_cnt;
282         u16 tx_errs;
283         u16 total_tx_cnt;
284         u16 paused;
285 #endif /* __BIG_ENDIAN */
286 };
287
288 /* Bits in yellowfin_desc.cmd */
289 enum desc_cmd_bits {
290         CMD_TX_PKT=0x10000000, CMD_RX_BUF=0x20000000, CMD_TXSTATUS=0x30000000,
291         CMD_NOP=0x60000000, CMD_STOP=0x70000000,
292         BRANCH_ALWAYS=0x0C0000, INTR_ALWAYS=0x300000, WAIT_ALWAYS=0x030000,
293         BRANCH_IFTRUE=0x040000,
294 };
295
296 /* Bits in yellowfin_desc.status */
297 enum desc_status_bits { RX_EOP=0x0040, };
298
299 /* Bits in the interrupt status/mask registers. */
300 enum intr_status_bits {
301         IntrRxDone=0x01, IntrRxInvalid=0x02, IntrRxPCIFault=0x04,IntrRxPCIErr=0x08,
302         IntrTxDone=0x10, IntrTxInvalid=0x20, IntrTxPCIFault=0x40,IntrTxPCIErr=0x80,
303         IntrEarlyRx=0x100, IntrWakeup=0x200, };
304
305 #define PRIV_ALIGN      31      /* Required alignment mask */
306 #define MII_CNT         4
307 struct yellowfin_private {
308         /* Descriptor rings first for alignment.
309            Tx requires a second descriptor for status. */
310         struct yellowfin_desc *rx_ring;
311         struct yellowfin_desc *tx_ring;
312         struct sk_buff* rx_skbuff[RX_RING_SIZE];
313         struct sk_buff* tx_skbuff[TX_RING_SIZE];
314         dma_addr_t rx_ring_dma;
315         dma_addr_t tx_ring_dma;
316
317         struct tx_status_words *tx_status;
318         dma_addr_t tx_status_dma;
319
320         struct timer_list timer;        /* Media selection timer. */
321         /* Frequently used and paired value: keep adjacent for cache effect. */
322         int chip_id, drv_flags;
323         struct pci_dev *pci_dev;
324         unsigned int cur_rx, dirty_rx;          /* Producer/consumer ring indices */
325         unsigned int rx_buf_sz;                         /* Based on MTU+slack. */
326         struct tx_status_words *tx_tail_desc;
327         unsigned int cur_tx, dirty_tx;
328         int tx_threshold;
329         unsigned int tx_full:1;                         /* The Tx queue is full. */
330         unsigned int full_duplex:1;                     /* Full-duplex operation requested. */
331         unsigned int duplex_lock:1;
332         unsigned int medialock:1;                       /* Do not sense media. */
333         unsigned int default_port:4;            /* Last dev->if_port value. */
334         /* MII transceiver section. */
335         int mii_cnt;                                            /* MII device addresses. */
336         u16 advertising;                                        /* NWay media advertisement */
337         unsigned char phys[MII_CNT];            /* MII device addresses, only first one used */
338         spinlock_t lock;
339         void __iomem *base;
340 };
341
342 static int read_eeprom(void __iomem *ioaddr, int location);
343 static int mdio_read(void __iomem *ioaddr, int phy_id, int location);
344 static void mdio_write(void __iomem *ioaddr, int phy_id, int location, int value);
345 static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
346 static int yellowfin_open(struct net_device *dev);
347 static void yellowfin_timer(unsigned long data);
348 static void yellowfin_tx_timeout(struct net_device *dev);
349 static void yellowfin_init_ring(struct net_device *dev);
350 static int yellowfin_start_xmit(struct sk_buff *skb, struct net_device *dev);
351 static irqreturn_t yellowfin_interrupt(int irq, void *dev_instance);
352 static int yellowfin_rx(struct net_device *dev);
353 static void yellowfin_error(struct net_device *dev, int intr_status);
354 static int yellowfin_close(struct net_device *dev);
355 static void set_rx_mode(struct net_device *dev);
356 static const struct ethtool_ops ethtool_ops;
357
358 static const struct net_device_ops netdev_ops = {
359         .ndo_open               = yellowfin_open,
360         .ndo_stop               = yellowfin_close,
361         .ndo_start_xmit         = yellowfin_start_xmit,
362         .ndo_set_multicast_list = set_rx_mode,
363         .ndo_change_mtu         = eth_change_mtu,
364         .ndo_validate_addr      = eth_validate_addr,
365         .ndo_do_ioctl           = netdev_ioctl,
366         .ndo_tx_timeout         = yellowfin_tx_timeout,
367 };
368
369 static int __devinit yellowfin_init_one(struct pci_dev *pdev,
370                                         const struct pci_device_id *ent)
371 {
372         struct net_device *dev;
373         struct yellowfin_private *np;
374         int irq;
375         int chip_idx = ent->driver_data;
376         static int find_cnt;
377         void __iomem *ioaddr;
378         int i, option = find_cnt < MAX_UNITS ? options[find_cnt] : 0;
379         int drv_flags = pci_id_tbl[chip_idx].drv_flags;
380         void *ring_space;
381         dma_addr_t ring_dma;
382 #ifdef USE_IO_OPS
383         int bar = 0;
384 #else
385         int bar = 1;
386 #endif
387
388 /* when built into the kernel, we only print version if device is found */
389 #ifndef MODULE
390         static int printed_version;
391         if (!printed_version++)
392                 printk(version);
393 #endif
394
395         i = pci_enable_device(pdev);
396         if (i) return i;
397
398         dev = alloc_etherdev(sizeof(*np));
399         if (!dev) {
400                 printk (KERN_ERR PFX "cannot allocate ethernet device\n");
401                 return -ENOMEM;
402         }
403         SET_NETDEV_DEV(dev, &pdev->dev);
404
405         np = netdev_priv(dev);
406
407         if (pci_request_regions(pdev, DRV_NAME))
408                 goto err_out_free_netdev;
409
410         pci_set_master (pdev);
411
412         ioaddr = pci_iomap(pdev, bar, YELLOWFIN_SIZE);
413         if (!ioaddr)
414                 goto err_out_free_res;
415
416         irq = pdev->irq;
417
418         if (drv_flags & DontUseEeprom)
419                 for (i = 0; i < 6; i++)
420                         dev->dev_addr[i] = ioread8(ioaddr + StnAddr + i);
421         else {
422                 int ee_offset = (read_eeprom(ioaddr, 6) == 0xff ? 0x100 : 0);
423                 for (i = 0; i < 6; i++)
424                         dev->dev_addr[i] = read_eeprom(ioaddr, ee_offset + i);
425         }
426
427         /* Reset the chip. */
428         iowrite32(0x80000000, ioaddr + DMACtrl);
429
430         dev->base_addr = (unsigned long)ioaddr;
431         dev->irq = irq;
432
433         pci_set_drvdata(pdev, dev);
434         spin_lock_init(&np->lock);
435
436         np->pci_dev = pdev;
437         np->chip_id = chip_idx;
438         np->drv_flags = drv_flags;
439         np->base = ioaddr;
440
441         ring_space = pci_alloc_consistent(pdev, TX_TOTAL_SIZE, &ring_dma);
442         if (!ring_space)
443                 goto err_out_cleardev;
444         np->tx_ring = (struct yellowfin_desc *)ring_space;
445         np->tx_ring_dma = ring_dma;
446
447         ring_space = pci_alloc_consistent(pdev, RX_TOTAL_SIZE, &ring_dma);
448         if (!ring_space)
449                 goto err_out_unmap_tx;
450         np->rx_ring = (struct yellowfin_desc *)ring_space;
451         np->rx_ring_dma = ring_dma;
452
453         ring_space = pci_alloc_consistent(pdev, STATUS_TOTAL_SIZE, &ring_dma);
454         if (!ring_space)
455                 goto err_out_unmap_rx;
456         np->tx_status = (struct tx_status_words *)ring_space;
457         np->tx_status_dma = ring_dma;
458
459         if (dev->mem_start)
460                 option = dev->mem_start;
461
462         /* The lower four bits are the media type. */
463         if (option > 0) {
464                 if (option & 0x200)
465                         np->full_duplex = 1;
466                 np->default_port = option & 15;
467                 if (np->default_port)
468                         np->medialock = 1;
469         }
470         if (find_cnt < MAX_UNITS  &&  full_duplex[find_cnt] > 0)
471                 np->full_duplex = 1;
472
473         if (np->full_duplex)
474                 np->duplex_lock = 1;
475
476         /* The Yellowfin-specific entries in the device structure. */
477         dev->netdev_ops = &netdev_ops;
478         SET_ETHTOOL_OPS(dev, &ethtool_ops);
479         dev->watchdog_timeo = TX_TIMEOUT;
480
481         if (mtu)
482                 dev->mtu = mtu;
483
484         i = register_netdev(dev);
485         if (i)
486                 goto err_out_unmap_status;
487
488         printk(KERN_INFO "%s: %s type %8x at %p, %pM, IRQ %d.\n",
489                    dev->name, pci_id_tbl[chip_idx].name,
490                    ioread32(ioaddr + ChipRev), ioaddr,
491                    dev->dev_addr, irq);
492
493         if (np->drv_flags & HasMII) {
494                 int phy, phy_idx = 0;
495                 for (phy = 0; phy < 32 && phy_idx < MII_CNT; phy++) {
496                         int mii_status = mdio_read(ioaddr, phy, 1);
497                         if (mii_status != 0xffff  &&  mii_status != 0x0000) {
498                                 np->phys[phy_idx++] = phy;
499                                 np->advertising = mdio_read(ioaddr, phy, 4);
500                                 printk(KERN_INFO "%s: MII PHY found at address %d, status "
501                                            "0x%4.4x advertising %4.4x.\n",
502                                            dev->name, phy, mii_status, np->advertising);
503                         }
504                 }
505                 np->mii_cnt = phy_idx;
506         }
507
508         find_cnt++;
509
510         return 0;
511
512 err_out_unmap_status:
513         pci_free_consistent(pdev, STATUS_TOTAL_SIZE, np->tx_status,
514                 np->tx_status_dma);
515 err_out_unmap_rx:
516         pci_free_consistent(pdev, RX_TOTAL_SIZE, np->rx_ring, np->rx_ring_dma);
517 err_out_unmap_tx:
518         pci_free_consistent(pdev, TX_TOTAL_SIZE, np->tx_ring, np->tx_ring_dma);
519 err_out_cleardev:
520         pci_set_drvdata(pdev, NULL);
521         pci_iounmap(pdev, ioaddr);
522 err_out_free_res:
523         pci_release_regions(pdev);
524 err_out_free_netdev:
525         free_netdev (dev);
526         return -ENODEV;
527 }
528
529 static int __devinit read_eeprom(void __iomem *ioaddr, int location)
530 {
531         int bogus_cnt = 10000;          /* Typical 33Mhz: 1050 ticks */
532
533         iowrite8(location, ioaddr + EEAddr);
534         iowrite8(0x30 | ((location >> 8) & 7), ioaddr + EECtrl);
535         while ((ioread8(ioaddr + EEStatus) & 0x80)  &&  --bogus_cnt > 0)
536                 ;
537         return ioread8(ioaddr + EERead);
538 }
539
540 /* MII Managemen Data I/O accesses.
541    These routines assume the MDIO controller is idle, and do not exit until
542    the command is finished. */
543
544 static int mdio_read(void __iomem *ioaddr, int phy_id, int location)
545 {
546         int i;
547
548         iowrite16((phy_id<<8) + location, ioaddr + MII_Addr);
549         iowrite16(1, ioaddr + MII_Cmd);
550         for (i = 10000; i >= 0; i--)
551                 if ((ioread16(ioaddr + MII_Status) & 1) == 0)
552                         break;
553         return ioread16(ioaddr + MII_Rd_Data);
554 }
555
556 static void mdio_write(void __iomem *ioaddr, int phy_id, int location, int value)
557 {
558         int i;
559
560         iowrite16((phy_id<<8) + location, ioaddr + MII_Addr);
561         iowrite16(value, ioaddr + MII_Wr_Data);
562
563         /* Wait for the command to finish. */
564         for (i = 10000; i >= 0; i--)
565                 if ((ioread16(ioaddr + MII_Status) & 1) == 0)
566                         break;
567         return;
568 }
569
570
571 static int yellowfin_open(struct net_device *dev)
572 {
573         struct yellowfin_private *yp = netdev_priv(dev);
574         void __iomem *ioaddr = yp->base;
575         int i;
576
577         /* Reset the chip. */
578         iowrite32(0x80000000, ioaddr + DMACtrl);
579
580         i = request_irq(dev->irq, &yellowfin_interrupt, IRQF_SHARED, dev->name, dev);
581         if (i) return i;
582
583         if (yellowfin_debug > 1)
584                 printk(KERN_DEBUG "%s: yellowfin_open() irq %d.\n",
585                            dev->name, dev->irq);
586
587         yellowfin_init_ring(dev);
588
589         iowrite32(yp->rx_ring_dma, ioaddr + RxPtr);
590         iowrite32(yp->tx_ring_dma, ioaddr + TxPtr);
591
592         for (i = 0; i < 6; i++)
593                 iowrite8(dev->dev_addr[i], ioaddr + StnAddr + i);
594
595         /* Set up various condition 'select' registers.
596            There are no options here. */
597         iowrite32(0x00800080, ioaddr + TxIntrSel);      /* Interrupt on Tx abort */
598         iowrite32(0x00800080, ioaddr + TxBranchSel);    /* Branch on Tx abort */
599         iowrite32(0x00400040, ioaddr + TxWaitSel);      /* Wait on Tx status */
600         iowrite32(0x00400040, ioaddr + RxIntrSel);      /* Interrupt on Rx done */
601         iowrite32(0x00400040, ioaddr + RxBranchSel);    /* Branch on Rx error */
602         iowrite32(0x00400040, ioaddr + RxWaitSel);      /* Wait on Rx done */
603
604         /* Initialize other registers: with so many this eventually this will
605            converted to an offset/value list. */
606         iowrite32(dma_ctrl, ioaddr + DMACtrl);
607         iowrite16(fifo_cfg, ioaddr + FIFOcfg);
608         /* Enable automatic generation of flow control frames, period 0xffff. */
609         iowrite32(0x0030FFFF, ioaddr + FlowCtrl);
610
611         yp->tx_threshold = 32;
612         iowrite32(yp->tx_threshold, ioaddr + TxThreshold);
613
614         if (dev->if_port == 0)
615                 dev->if_port = yp->default_port;
616
617         netif_start_queue(dev);
618
619         /* Setting the Rx mode will start the Rx process. */
620         if (yp->drv_flags & IsGigabit) {
621                 /* We are always in full-duplex mode with gigabit! */
622                 yp->full_duplex = 1;
623                 iowrite16(0x01CF, ioaddr + Cnfg);
624         } else {
625                 iowrite16(0x0018, ioaddr + FrameGap0); /* 0060/4060 for non-MII 10baseT */
626                 iowrite16(0x1018, ioaddr + FrameGap1);
627                 iowrite16(0x101C | (yp->full_duplex ? 2 : 0), ioaddr + Cnfg);
628         }
629         set_rx_mode(dev);
630
631         /* Enable interrupts by setting the interrupt mask. */
632         iowrite16(0x81ff, ioaddr + IntrEnb);                    /* See enum intr_status_bits */
633         iowrite16(0x0000, ioaddr + EventStatus);                /* Clear non-interrupting events */
634         iowrite32(0x80008000, ioaddr + RxCtrl);         /* Start Rx and Tx channels. */
635         iowrite32(0x80008000, ioaddr + TxCtrl);
636
637         if (yellowfin_debug > 2) {
638                 printk(KERN_DEBUG "%s: Done yellowfin_open().\n",
639                            dev->name);
640         }
641
642         /* Set the timer to check for link beat. */
643         init_timer(&yp->timer);
644         yp->timer.expires = jiffies + 3*HZ;
645         yp->timer.data = (unsigned long)dev;
646         yp->timer.function = &yellowfin_timer;                          /* timer handler */
647         add_timer(&yp->timer);
648
649         return 0;
650 }
651
652 static void yellowfin_timer(unsigned long data)
653 {
654         struct net_device *dev = (struct net_device *)data;
655         struct yellowfin_private *yp = netdev_priv(dev);
656         void __iomem *ioaddr = yp->base;
657         int next_tick = 60*HZ;
658
659         if (yellowfin_debug > 3) {
660                 printk(KERN_DEBUG "%s: Yellowfin timer tick, status %8.8x.\n",
661                            dev->name, ioread16(ioaddr + IntrStatus));
662         }
663
664         if (yp->mii_cnt) {
665                 int bmsr = mdio_read(ioaddr, yp->phys[0], MII_BMSR);
666                 int lpa = mdio_read(ioaddr, yp->phys[0], MII_LPA);
667                 int negotiated = lpa & yp->advertising;
668                 if (yellowfin_debug > 1)
669                         printk(KERN_DEBUG "%s: MII #%d status register is %4.4x, "
670                                    "link partner capability %4.4x.\n",
671                                    dev->name, yp->phys[0], bmsr, lpa);
672
673                 yp->full_duplex = mii_duplex(yp->duplex_lock, negotiated);
674
675                 iowrite16(0x101C | (yp->full_duplex ? 2 : 0), ioaddr + Cnfg);
676
677                 if (bmsr & BMSR_LSTATUS)
678                         next_tick = 60*HZ;
679                 else
680                         next_tick = 3*HZ;
681         }
682
683         yp->timer.expires = jiffies + next_tick;
684         add_timer(&yp->timer);
685 }
686
687 static void yellowfin_tx_timeout(struct net_device *dev)
688 {
689         struct yellowfin_private *yp = netdev_priv(dev);
690         void __iomem *ioaddr = yp->base;
691
692         printk(KERN_WARNING "%s: Yellowfin transmit timed out at %d/%d Tx "
693                    "status %4.4x, Rx status %4.4x, resetting...\n",
694                    dev->name, yp->cur_tx, yp->dirty_tx,
695                    ioread32(ioaddr + TxStatus), ioread32(ioaddr + RxStatus));
696
697         /* Note: these should be KERN_DEBUG. */
698         if (yellowfin_debug) {
699                 int i;
700                 printk(KERN_WARNING "  Rx ring %p: ", yp->rx_ring);
701                 for (i = 0; i < RX_RING_SIZE; i++)
702                         printk(" %8.8x", yp->rx_ring[i].result_status);
703                 printk("\n"KERN_WARNING"  Tx ring %p: ", yp->tx_ring);
704                 for (i = 0; i < TX_RING_SIZE; i++)
705                         printk(" %4.4x /%8.8x", yp->tx_status[i].tx_errs,
706                                    yp->tx_ring[i].result_status);
707                 printk("\n");
708         }
709
710         /* If the hardware is found to hang regularly, we will update the code
711            to reinitialize the chip here. */
712         dev->if_port = 0;
713
714         /* Wake the potentially-idle transmit channel. */
715         iowrite32(0x10001000, yp->base + TxCtrl);
716         if (yp->cur_tx - yp->dirty_tx < TX_QUEUE_SIZE)
717                 netif_wake_queue (dev);         /* Typical path */
718
719         dev->trans_start = jiffies;
720         dev->stats.tx_errors++;
721 }
722
723 /* Initialize the Rx and Tx rings, along with various 'dev' bits. */
724 static void yellowfin_init_ring(struct net_device *dev)
725 {
726         struct yellowfin_private *yp = netdev_priv(dev);
727         int i;
728
729         yp->tx_full = 0;
730         yp->cur_rx = yp->cur_tx = 0;
731         yp->dirty_tx = 0;
732
733         yp->rx_buf_sz = (dev->mtu <= 1500 ? PKT_BUF_SZ : dev->mtu + 32);
734
735         for (i = 0; i < RX_RING_SIZE; i++) {
736                 yp->rx_ring[i].dbdma_cmd =
737                         cpu_to_le32(CMD_RX_BUF | INTR_ALWAYS | yp->rx_buf_sz);
738                 yp->rx_ring[i].branch_addr = cpu_to_le32(yp->rx_ring_dma +
739                         ((i+1)%RX_RING_SIZE)*sizeof(struct yellowfin_desc));
740         }
741
742         for (i = 0; i < RX_RING_SIZE; i++) {
743                 struct sk_buff *skb = dev_alloc_skb(yp->rx_buf_sz);
744                 yp->rx_skbuff[i] = skb;
745                 if (skb == NULL)
746                         break;
747                 skb->dev = dev;         /* Mark as being used by this device. */
748                 skb_reserve(skb, 2);    /* 16 byte align the IP header. */
749                 yp->rx_ring[i].addr = cpu_to_le32(pci_map_single(yp->pci_dev,
750                         skb->data, yp->rx_buf_sz, PCI_DMA_FROMDEVICE));
751         }
752         yp->rx_ring[i-1].dbdma_cmd = cpu_to_le32(CMD_STOP);
753         yp->dirty_rx = (unsigned int)(i - RX_RING_SIZE);
754
755 #define NO_TXSTATS
756 #ifdef NO_TXSTATS
757         /* In this mode the Tx ring needs only a single descriptor. */
758         for (i = 0; i < TX_RING_SIZE; i++) {
759                 yp->tx_skbuff[i] = NULL;
760                 yp->tx_ring[i].dbdma_cmd = cpu_to_le32(CMD_STOP);
761                 yp->tx_ring[i].branch_addr = cpu_to_le32(yp->tx_ring_dma +
762                         ((i+1)%TX_RING_SIZE)*sizeof(struct yellowfin_desc));
763         }
764         /* Wrap ring */
765         yp->tx_ring[--i].dbdma_cmd = cpu_to_le32(CMD_STOP | BRANCH_ALWAYS);
766 #else
767 {
768         int j;
769
770         /* Tx ring needs a pair of descriptors, the second for the status. */
771         for (i = 0; i < TX_RING_SIZE; i++) {
772                 j = 2*i;
773                 yp->tx_skbuff[i] = 0;
774                 /* Branch on Tx error. */
775                 yp->tx_ring[j].dbdma_cmd = cpu_to_le32(CMD_STOP);
776                 yp->tx_ring[j].branch_addr = cpu_to_le32(yp->tx_ring_dma +
777                         (j+1)*sizeof(struct yellowfin_desc));
778                 j++;
779                 if (yp->flags & FullTxStatus) {
780                         yp->tx_ring[j].dbdma_cmd =
781                                 cpu_to_le32(CMD_TXSTATUS | sizeof(*yp->tx_status));
782                         yp->tx_ring[j].request_cnt = sizeof(*yp->tx_status);
783                         yp->tx_ring[j].addr = cpu_to_le32(yp->tx_status_dma +
784                                 i*sizeof(struct tx_status_words));
785                 } else {
786                         /* Symbios chips write only tx_errs word. */
787                         yp->tx_ring[j].dbdma_cmd =
788                                 cpu_to_le32(CMD_TXSTATUS | INTR_ALWAYS | 2);
789                         yp->tx_ring[j].request_cnt = 2;
790                         /* Om pade ummmmm... */
791                         yp->tx_ring[j].addr = cpu_to_le32(yp->tx_status_dma +
792                                 i*sizeof(struct tx_status_words) +
793                                 &(yp->tx_status[0].tx_errs) -
794                                 &(yp->tx_status[0]));
795                 }
796                 yp->tx_ring[j].branch_addr = cpu_to_le32(yp->tx_ring_dma +
797                         ((j+1)%(2*TX_RING_SIZE))*sizeof(struct yellowfin_desc));
798         }
799         /* Wrap ring */
800         yp->tx_ring[++j].dbdma_cmd |= cpu_to_le32(BRANCH_ALWAYS | INTR_ALWAYS);
801 }
802 #endif
803         yp->tx_tail_desc = &yp->tx_status[0];
804         return;
805 }
806
807 static int yellowfin_start_xmit(struct sk_buff *skb, struct net_device *dev)
808 {
809         struct yellowfin_private *yp = netdev_priv(dev);
810         unsigned entry;
811         int len = skb->len;
812
813         netif_stop_queue (dev);
814
815         /* Note: Ordering is important here, set the field with the
816            "ownership" bit last, and only then increment cur_tx. */
817
818         /* Calculate the next Tx descriptor entry. */
819         entry = yp->cur_tx % TX_RING_SIZE;
820
821         if (gx_fix) {   /* Note: only works for paddable protocols e.g.  IP. */
822                 int cacheline_end = ((unsigned long)skb->data + skb->len) % 32;
823                 /* Fix GX chipset errata. */
824                 if (cacheline_end > 24  || cacheline_end == 0) {
825                         len = skb->len + 32 - cacheline_end + 1;
826                         if (skb_padto(skb, len)) {
827                                 yp->tx_skbuff[entry] = NULL;
828                                 netif_wake_queue(dev);
829                                 return 0;
830                         }
831                 }
832         }
833         yp->tx_skbuff[entry] = skb;
834
835 #ifdef NO_TXSTATS
836         yp->tx_ring[entry].addr = cpu_to_le32(pci_map_single(yp->pci_dev,
837                 skb->data, len, PCI_DMA_TODEVICE));
838         yp->tx_ring[entry].result_status = 0;
839         if (entry >= TX_RING_SIZE-1) {
840                 /* New stop command. */
841                 yp->tx_ring[0].dbdma_cmd = cpu_to_le32(CMD_STOP);
842                 yp->tx_ring[TX_RING_SIZE-1].dbdma_cmd =
843                         cpu_to_le32(CMD_TX_PKT|BRANCH_ALWAYS | len);
844         } else {
845                 yp->tx_ring[entry+1].dbdma_cmd = cpu_to_le32(CMD_STOP);
846                 yp->tx_ring[entry].dbdma_cmd =
847                         cpu_to_le32(CMD_TX_PKT | BRANCH_IFTRUE | len);
848         }
849         yp->cur_tx++;
850 #else
851         yp->tx_ring[entry<<1].request_cnt = len;
852         yp->tx_ring[entry<<1].addr = cpu_to_le32(pci_map_single(yp->pci_dev,
853                 skb->data, len, PCI_DMA_TODEVICE));
854         /* The input_last (status-write) command is constant, but we must
855            rewrite the subsequent 'stop' command. */
856
857         yp->cur_tx++;
858         {
859                 unsigned next_entry = yp->cur_tx % TX_RING_SIZE;
860                 yp->tx_ring[next_entry<<1].dbdma_cmd = cpu_to_le32(CMD_STOP);
861         }
862         /* Final step -- overwrite the old 'stop' command. */
863
864         yp->tx_ring[entry<<1].dbdma_cmd =
865                 cpu_to_le32( ((entry % 6) == 0 ? CMD_TX_PKT|INTR_ALWAYS|BRANCH_IFTRUE :
866                                           CMD_TX_PKT | BRANCH_IFTRUE) | len);
867 #endif
868
869         /* Non-x86 Todo: explicitly flush cache lines here. */
870
871         /* Wake the potentially-idle transmit channel. */
872         iowrite32(0x10001000, yp->base + TxCtrl);
873
874         if (yp->cur_tx - yp->dirty_tx < TX_QUEUE_SIZE)
875                 netif_start_queue (dev);                /* Typical path */
876         else
877                 yp->tx_full = 1;
878         dev->trans_start = jiffies;
879
880         if (yellowfin_debug > 4) {
881                 printk(KERN_DEBUG "%s: Yellowfin transmit frame #%d queued in slot %d.\n",
882                            dev->name, yp->cur_tx, entry);
883         }
884         return 0;
885 }
886
887 /* The interrupt handler does all of the Rx thread work and cleans up
888    after the Tx thread. */
889 static irqreturn_t yellowfin_interrupt(int irq, void *dev_instance)
890 {
891         struct net_device *dev = dev_instance;
892         struct yellowfin_private *yp;
893         void __iomem *ioaddr;
894         int boguscnt = max_interrupt_work;
895         unsigned int handled = 0;
896
897         yp = netdev_priv(dev);
898         ioaddr = yp->base;
899
900         spin_lock (&yp->lock);
901
902         do {
903                 u16 intr_status = ioread16(ioaddr + IntrClear);
904
905                 if (yellowfin_debug > 4)
906                         printk(KERN_DEBUG "%s: Yellowfin interrupt, status %4.4x.\n",
907                                    dev->name, intr_status);
908
909                 if (intr_status == 0)
910                         break;
911                 handled = 1;
912
913                 if (intr_status & (IntrRxDone | IntrEarlyRx)) {
914                         yellowfin_rx(dev);
915                         iowrite32(0x10001000, ioaddr + RxCtrl);         /* Wake Rx engine. */
916                 }
917
918 #ifdef NO_TXSTATS
919                 for (; yp->cur_tx - yp->dirty_tx > 0; yp->dirty_tx++) {
920                         int entry = yp->dirty_tx % TX_RING_SIZE;
921                         struct sk_buff *skb;
922
923                         if (yp->tx_ring[entry].result_status == 0)
924                                 break;
925                         skb = yp->tx_skbuff[entry];
926                         dev->stats.tx_packets++;
927                         dev->stats.tx_bytes += skb->len;
928                         /* Free the original skb. */
929                         pci_unmap_single(yp->pci_dev, le32_to_cpu(yp->tx_ring[entry].addr),
930                                 skb->len, PCI_DMA_TODEVICE);
931                         dev_kfree_skb_irq(skb);
932                         yp->tx_skbuff[entry] = NULL;
933                 }
934                 if (yp->tx_full
935                         && yp->cur_tx - yp->dirty_tx < TX_QUEUE_SIZE - 4) {
936                         /* The ring is no longer full, clear tbusy. */
937                         yp->tx_full = 0;
938                         netif_wake_queue(dev);
939                 }
940 #else
941                 if ((intr_status & IntrTxDone) || (yp->tx_tail_desc->tx_errs)) {
942                         unsigned dirty_tx = yp->dirty_tx;
943
944                         for (dirty_tx = yp->dirty_tx; yp->cur_tx - dirty_tx > 0;
945                                  dirty_tx++) {
946                                 /* Todo: optimize this. */
947                                 int entry = dirty_tx % TX_RING_SIZE;
948                                 u16 tx_errs = yp->tx_status[entry].tx_errs;
949                                 struct sk_buff *skb;
950
951 #ifndef final_version
952                                 if (yellowfin_debug > 5)
953                                         printk(KERN_DEBUG "%s: Tx queue %d check, Tx status "
954                                                    "%4.4x %4.4x %4.4x %4.4x.\n",
955                                                    dev->name, entry,
956                                                    yp->tx_status[entry].tx_cnt,
957                                                    yp->tx_status[entry].tx_errs,
958                                                    yp->tx_status[entry].total_tx_cnt,
959                                                    yp->tx_status[entry].paused);
960 #endif
961                                 if (tx_errs == 0)
962                                         break;  /* It still hasn't been Txed */
963                                 skb = yp->tx_skbuff[entry];
964                                 if (tx_errs & 0xF810) {
965                                         /* There was an major error, log it. */
966 #ifndef final_version
967                                         if (yellowfin_debug > 1)
968                                                 printk(KERN_DEBUG "%s: Transmit error, Tx status %4.4x.\n",
969                                                            dev->name, tx_errs);
970 #endif
971                                         dev->stats.tx_errors++;
972                                         if (tx_errs & 0xF800) dev->stats.tx_aborted_errors++;
973                                         if (tx_errs & 0x0800) dev->stats.tx_carrier_errors++;
974                                         if (tx_errs & 0x2000) dev->stats.tx_window_errors++;
975                                         if (tx_errs & 0x8000) dev->stats.tx_fifo_errors++;
976                                 } else {
977 #ifndef final_version
978                                         if (yellowfin_debug > 4)
979                                                 printk(KERN_DEBUG "%s: Normal transmit, Tx status %4.4x.\n",
980                                                            dev->name, tx_errs);
981 #endif
982                                         dev->stats.tx_bytes += skb->len;
983                                         dev->stats.collisions += tx_errs & 15;
984                                         dev->stats.tx_packets++;
985                                 }
986                                 /* Free the original skb. */
987                                 pci_unmap_single(yp->pci_dev,
988                                         yp->tx_ring[entry<<1].addr, skb->len,
989                                         PCI_DMA_TODEVICE);
990                                 dev_kfree_skb_irq(skb);
991                                 yp->tx_skbuff[entry] = 0;
992                                 /* Mark status as empty. */
993                                 yp->tx_status[entry].tx_errs = 0;
994                         }
995
996 #ifndef final_version
997                         if (yp->cur_tx - dirty_tx > TX_RING_SIZE) {
998                                 printk(KERN_ERR "%s: Out-of-sync dirty pointer, %d vs. %d, full=%d.\n",
999                                            dev->name, dirty_tx, yp->cur_tx, yp->tx_full);
1000                                 dirty_tx += TX_RING_SIZE;
1001                         }
1002 #endif
1003
1004                         if (yp->tx_full
1005                                 && yp->cur_tx - dirty_tx < TX_QUEUE_SIZE - 2) {
1006                                 /* The ring is no longer full, clear tbusy. */
1007                                 yp->tx_full = 0;
1008                                 netif_wake_queue(dev);
1009                         }
1010
1011                         yp->dirty_tx = dirty_tx;
1012                         yp->tx_tail_desc = &yp->tx_status[dirty_tx % TX_RING_SIZE];
1013                 }
1014 #endif
1015
1016                 /* Log errors and other uncommon events. */
1017                 if (intr_status & 0x2ee)        /* Abnormal error summary. */
1018                         yellowfin_error(dev, intr_status);
1019
1020                 if (--boguscnt < 0) {
1021                         printk(KERN_WARNING "%s: Too much work at interrupt, "
1022                                    "status=0x%4.4x.\n",
1023                                    dev->name, intr_status);
1024                         break;
1025                 }
1026         } while (1);
1027
1028         if (yellowfin_debug > 3)
1029                 printk(KERN_DEBUG "%s: exiting interrupt, status=%#4.4x.\n",
1030                            dev->name, ioread16(ioaddr + IntrStatus));
1031
1032         spin_unlock (&yp->lock);
1033         return IRQ_RETVAL(handled);
1034 }
1035
1036 /* This routine is logically part of the interrupt handler, but separated
1037    for clarity and better register allocation. */
1038 static int yellowfin_rx(struct net_device *dev)
1039 {
1040         struct yellowfin_private *yp = netdev_priv(dev);
1041         int entry = yp->cur_rx % RX_RING_SIZE;
1042         int boguscnt = yp->dirty_rx + RX_RING_SIZE - yp->cur_rx;
1043
1044         if (yellowfin_debug > 4) {
1045                 printk(KERN_DEBUG " In yellowfin_rx(), entry %d status %8.8x.\n",
1046                            entry, yp->rx_ring[entry].result_status);
1047                 printk(KERN_DEBUG "   #%d desc. %8.8x %8.8x %8.8x.\n",
1048                            entry, yp->rx_ring[entry].dbdma_cmd, yp->rx_ring[entry].addr,
1049                            yp->rx_ring[entry].result_status);
1050         }
1051
1052         /* If EOP is set on the next entry, it's a new packet. Send it up. */
1053         while (1) {
1054                 struct yellowfin_desc *desc = &yp->rx_ring[entry];
1055                 struct sk_buff *rx_skb = yp->rx_skbuff[entry];
1056                 s16 frame_status;
1057                 u16 desc_status;
1058                 int data_size;
1059                 u8 *buf_addr;
1060
1061                 if(!desc->result_status)
1062                         break;
1063                 pci_dma_sync_single_for_cpu(yp->pci_dev, le32_to_cpu(desc->addr),
1064                         yp->rx_buf_sz, PCI_DMA_FROMDEVICE);
1065                 desc_status = le32_to_cpu(desc->result_status) >> 16;
1066                 buf_addr = rx_skb->data;
1067                 data_size = (le32_to_cpu(desc->dbdma_cmd) -
1068                         le32_to_cpu(desc->result_status)) & 0xffff;
1069                 frame_status = get_unaligned_le16(&(buf_addr[data_size - 2]));
1070                 if (yellowfin_debug > 4)
1071                         printk(KERN_DEBUG "  yellowfin_rx() status was %4.4x.\n",
1072                                    frame_status);
1073                 if (--boguscnt < 0)
1074                         break;
1075                 if ( ! (desc_status & RX_EOP)) {
1076                         if (data_size != 0)
1077                                 printk(KERN_WARNING "%s: Oversized Ethernet frame spanned multiple buffers,"
1078                                            " status %4.4x, data_size %d!\n", dev->name, desc_status, data_size);
1079                         dev->stats.rx_length_errors++;
1080                 } else if ((yp->drv_flags & IsGigabit)  &&  (frame_status & 0x0038)) {
1081                         /* There was a error. */
1082                         if (yellowfin_debug > 3)
1083                                 printk(KERN_DEBUG "  yellowfin_rx() Rx error was %4.4x.\n",
1084                                            frame_status);
1085                         dev->stats.rx_errors++;
1086                         if (frame_status & 0x0060) dev->stats.rx_length_errors++;
1087                         if (frame_status & 0x0008) dev->stats.rx_frame_errors++;
1088                         if (frame_status & 0x0010) dev->stats.rx_crc_errors++;
1089                         if (frame_status < 0) dev->stats.rx_dropped++;
1090                 } else if ( !(yp->drv_flags & IsGigabit)  &&
1091                                    ((buf_addr[data_size-1] & 0x85) || buf_addr[data_size-2] & 0xC0)) {
1092                         u8 status1 = buf_addr[data_size-2];
1093                         u8 status2 = buf_addr[data_size-1];
1094                         dev->stats.rx_errors++;
1095                         if (status1 & 0xC0) dev->stats.rx_length_errors++;
1096                         if (status2 & 0x03) dev->stats.rx_frame_errors++;
1097                         if (status2 & 0x04) dev->stats.rx_crc_errors++;
1098                         if (status2 & 0x80) dev->stats.rx_dropped++;
1099 #ifdef YF_PROTOTYPE             /* Support for prototype hardware errata. */
1100                 } else if ((yp->flags & HasMACAddrBug)  &&
1101                         memcmp(le32_to_cpu(yp->rx_ring_dma +
1102                                 entry*sizeof(struct yellowfin_desc)),
1103                                 dev->dev_addr, 6) != 0 &&
1104                         memcmp(le32_to_cpu(yp->rx_ring_dma +
1105                                 entry*sizeof(struct yellowfin_desc)),
1106                                 "\377\377\377\377\377\377", 6) != 0) {
1107                         if (bogus_rx++ == 0)
1108                                 printk(KERN_WARNING "%s: Bad frame to %pM\n",
1109                                            dev->name, buf_addr);
1110 #endif
1111                 } else {
1112                         struct sk_buff *skb;
1113                         int pkt_len = data_size -
1114                                 (yp->chip_id ? 7 : 8 + buf_addr[data_size - 8]);
1115                         /* To verify: Yellowfin Length should omit the CRC! */
1116
1117 #ifndef final_version
1118                         if (yellowfin_debug > 4)
1119                                 printk(KERN_DEBUG "  yellowfin_rx() normal Rx pkt length %d"
1120                                            " of %d, bogus_cnt %d.\n",
1121                                            pkt_len, data_size, boguscnt);
1122 #endif
1123                         /* Check if the packet is long enough to just pass up the skbuff
1124                            without copying to a properly sized skbuff. */
1125                         if (pkt_len > rx_copybreak) {
1126                                 skb_put(skb = rx_skb, pkt_len);
1127                                 pci_unmap_single(yp->pci_dev,
1128                                         le32_to_cpu(yp->rx_ring[entry].addr),
1129                                         yp->rx_buf_sz,
1130                                         PCI_DMA_FROMDEVICE);
1131                                 yp->rx_skbuff[entry] = NULL;
1132                         } else {
1133                                 skb = dev_alloc_skb(pkt_len + 2);
1134                                 if (skb == NULL)
1135                                         break;
1136                                 skb_reserve(skb, 2);    /* 16 byte align the IP header */
1137                                 skb_copy_to_linear_data(skb, rx_skb->data, pkt_len);
1138                                 skb_put(skb, pkt_len);
1139                                 pci_dma_sync_single_for_device(yp->pci_dev,
1140                                                                 le32_to_cpu(desc->addr),
1141                                                                 yp->rx_buf_sz,
1142                                                                 PCI_DMA_FROMDEVICE);
1143                         }
1144                         skb->protocol = eth_type_trans(skb, dev);
1145                         netif_rx(skb);
1146                         dev->stats.rx_packets++;
1147                         dev->stats.rx_bytes += pkt_len;
1148                 }
1149                 entry = (++yp->cur_rx) % RX_RING_SIZE;
1150         }
1151
1152         /* Refill the Rx ring buffers. */
1153         for (; yp->cur_rx - yp->dirty_rx > 0; yp->dirty_rx++) {
1154                 entry = yp->dirty_rx % RX_RING_SIZE;
1155                 if (yp->rx_skbuff[entry] == NULL) {
1156                         struct sk_buff *skb = dev_alloc_skb(yp->rx_buf_sz);
1157                         if (skb == NULL)
1158                                 break;                          /* Better luck next round. */
1159                         yp->rx_skbuff[entry] = skb;
1160                         skb->dev = dev; /* Mark as being used by this device. */
1161                         skb_reserve(skb, 2);    /* Align IP on 16 byte boundaries */
1162                         yp->rx_ring[entry].addr = cpu_to_le32(pci_map_single(yp->pci_dev,
1163                                 skb->data, yp->rx_buf_sz, PCI_DMA_FROMDEVICE));
1164                 }
1165                 yp->rx_ring[entry].dbdma_cmd = cpu_to_le32(CMD_STOP);
1166                 yp->rx_ring[entry].result_status = 0;   /* Clear complete bit. */
1167                 if (entry != 0)
1168                         yp->rx_ring[entry - 1].dbdma_cmd =
1169                                 cpu_to_le32(CMD_RX_BUF | INTR_ALWAYS | yp->rx_buf_sz);
1170                 else
1171                         yp->rx_ring[RX_RING_SIZE - 1].dbdma_cmd =
1172                                 cpu_to_le32(CMD_RX_BUF | INTR_ALWAYS | BRANCH_ALWAYS
1173                                                         | yp->rx_buf_sz);
1174         }
1175
1176         return 0;
1177 }
1178
1179 static void yellowfin_error(struct net_device *dev, int intr_status)
1180 {
1181         printk(KERN_ERR "%s: Something Wicked happened! %4.4x.\n",
1182                    dev->name, intr_status);
1183         /* Hmmmmm, it's not clear what to do here. */
1184         if (intr_status & (IntrTxPCIErr | IntrTxPCIFault))
1185                 dev->stats.tx_errors++;
1186         if (intr_status & (IntrRxPCIErr | IntrRxPCIFault))
1187                 dev->stats.rx_errors++;
1188 }
1189
1190 static int yellowfin_close(struct net_device *dev)
1191 {
1192         struct yellowfin_private *yp = netdev_priv(dev);
1193         void __iomem *ioaddr = yp->base;
1194         int i;
1195
1196         netif_stop_queue (dev);
1197
1198         if (yellowfin_debug > 1) {
1199                 printk(KERN_DEBUG "%s: Shutting down ethercard, status was Tx %4.4x "
1200                            "Rx %4.4x Int %2.2x.\n",
1201                            dev->name, ioread16(ioaddr + TxStatus),
1202                            ioread16(ioaddr + RxStatus),
1203                            ioread16(ioaddr + IntrStatus));
1204                 printk(KERN_DEBUG "%s: Queue pointers were Tx %d / %d,  Rx %d / %d.\n",
1205                            dev->name, yp->cur_tx, yp->dirty_tx, yp->cur_rx, yp->dirty_rx);
1206         }
1207
1208         /* Disable interrupts by clearing the interrupt mask. */
1209         iowrite16(0x0000, ioaddr + IntrEnb);
1210
1211         /* Stop the chip's Tx and Rx processes. */
1212         iowrite32(0x80000000, ioaddr + RxCtrl);
1213         iowrite32(0x80000000, ioaddr + TxCtrl);
1214
1215         del_timer(&yp->timer);
1216
1217 #if defined(__i386__)
1218         if (yellowfin_debug > 2) {
1219                 printk("\n"KERN_DEBUG"  Tx ring at %8.8llx:\n",
1220                                 (unsigned long long)yp->tx_ring_dma);
1221                 for (i = 0; i < TX_RING_SIZE*2; i++)
1222                         printk(" %c #%d desc. %8.8x %8.8x %8.8x %8.8x.\n",
1223                                    ioread32(ioaddr + TxPtr) == (long)&yp->tx_ring[i] ? '>' : ' ',
1224                                    i, yp->tx_ring[i].dbdma_cmd, yp->tx_ring[i].addr,
1225                                    yp->tx_ring[i].branch_addr, yp->tx_ring[i].result_status);
1226                 printk(KERN_DEBUG "  Tx status %p:\n", yp->tx_status);
1227                 for (i = 0; i < TX_RING_SIZE; i++)
1228                         printk("   #%d status %4.4x %4.4x %4.4x %4.4x.\n",
1229                                    i, yp->tx_status[i].tx_cnt, yp->tx_status[i].tx_errs,
1230                                    yp->tx_status[i].total_tx_cnt, yp->tx_status[i].paused);
1231
1232                 printk("\n"KERN_DEBUG "  Rx ring %8.8llx:\n",
1233                                 (unsigned long long)yp->rx_ring_dma);
1234                 for (i = 0; i < RX_RING_SIZE; i++) {
1235                         printk(KERN_DEBUG " %c #%d desc. %8.8x %8.8x %8.8x\n",
1236                                    ioread32(ioaddr + RxPtr) == (long)&yp->rx_ring[i] ? '>' : ' ',
1237                                    i, yp->rx_ring[i].dbdma_cmd, yp->rx_ring[i].addr,
1238                                    yp->rx_ring[i].result_status);
1239                         if (yellowfin_debug > 6) {
1240                                 if (get_unaligned((u8*)yp->rx_ring[i].addr) != 0x69) {
1241                                         int j;
1242                                         for (j = 0; j < 0x50; j++)
1243                                                 printk(" %4.4x",
1244                                                            get_unaligned(((u16*)yp->rx_ring[i].addr) + j));
1245                                         printk("\n");
1246                                 }
1247                         }
1248                 }
1249         }
1250 #endif /* __i386__ debugging only */
1251
1252         free_irq(dev->irq, dev);
1253
1254         /* Free all the skbuffs in the Rx queue. */
1255         for (i = 0; i < RX_RING_SIZE; i++) {
1256                 yp->rx_ring[i].dbdma_cmd = cpu_to_le32(CMD_STOP);
1257                 yp->rx_ring[i].addr = cpu_to_le32(0xBADF00D0); /* An invalid address. */
1258                 if (yp->rx_skbuff[i]) {
1259                         dev_kfree_skb(yp->rx_skbuff[i]);
1260                 }
1261                 yp->rx_skbuff[i] = NULL;
1262         }
1263         for (i = 0; i < TX_RING_SIZE; i++) {
1264                 if (yp->tx_skbuff[i])
1265                         dev_kfree_skb(yp->tx_skbuff[i]);
1266                 yp->tx_skbuff[i] = NULL;
1267         }
1268
1269 #ifdef YF_PROTOTYPE                     /* Support for prototype hardware errata. */
1270         if (yellowfin_debug > 0) {
1271                 printk(KERN_DEBUG "%s: Received %d frames that we should not have.\n",
1272                            dev->name, bogus_rx);
1273         }
1274 #endif
1275
1276         return 0;
1277 }
1278
1279 /* Set or clear the multicast filter for this adaptor. */
1280
1281 static void set_rx_mode(struct net_device *dev)
1282 {
1283         struct yellowfin_private *yp = netdev_priv(dev);
1284         void __iomem *ioaddr = yp->base;
1285         u16 cfg_value = ioread16(ioaddr + Cnfg);
1286
1287         /* Stop the Rx process to change any value. */
1288         iowrite16(cfg_value & ~0x1000, ioaddr + Cnfg);
1289         if (dev->flags & IFF_PROMISC) {                 /* Set promiscuous. */
1290                 iowrite16(0x000F, ioaddr + AddrMode);
1291         } else if ((dev->mc_count > 64)  ||  (dev->flags & IFF_ALLMULTI)) {
1292                 /* Too many to filter well, or accept all multicasts. */
1293                 iowrite16(0x000B, ioaddr + AddrMode);
1294         } else if (dev->mc_count > 0) { /* Must use the multicast hash table. */
1295                 struct dev_mc_list *mclist;
1296                 u16 hash_table[4];
1297                 int i;
1298                 memset(hash_table, 0, sizeof(hash_table));
1299                 for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
1300                          i++, mclist = mclist->next) {
1301                         unsigned int bit;
1302
1303                         /* Due to a bug in the early chip versions, multiple filter
1304                            slots must be set for each address. */
1305                         if (yp->drv_flags & HasMulticastBug) {
1306                                 bit = (ether_crc_le(3, mclist->dmi_addr) >> 3) & 0x3f;
1307                                 hash_table[bit >> 4] |= (1 << bit);
1308                                 bit = (ether_crc_le(4, mclist->dmi_addr) >> 3) & 0x3f;
1309                                 hash_table[bit >> 4] |= (1 << bit);
1310                                 bit = (ether_crc_le(5, mclist->dmi_addr) >> 3) & 0x3f;
1311                                 hash_table[bit >> 4] |= (1 << bit);
1312                         }
1313                         bit = (ether_crc_le(6, mclist->dmi_addr) >> 3) & 0x3f;
1314                         hash_table[bit >> 4] |= (1 << bit);
1315                 }
1316                 /* Copy the hash table to the chip. */
1317                 for (i = 0; i < 4; i++)
1318                         iowrite16(hash_table[i], ioaddr + HashTbl + i*2);
1319                 iowrite16(0x0003, ioaddr + AddrMode);
1320         } else {                                        /* Normal, unicast/broadcast-only mode. */
1321                 iowrite16(0x0001, ioaddr + AddrMode);
1322         }
1323         /* Restart the Rx process. */
1324         iowrite16(cfg_value | 0x1000, ioaddr + Cnfg);
1325 }
1326
1327 static void yellowfin_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
1328 {
1329         struct yellowfin_private *np = netdev_priv(dev);
1330         strcpy(info->driver, DRV_NAME);
1331         strcpy(info->version, DRV_VERSION);
1332         strcpy(info->bus_info, pci_name(np->pci_dev));
1333 }
1334
1335 static const struct ethtool_ops ethtool_ops = {
1336         .get_drvinfo = yellowfin_get_drvinfo
1337 };
1338
1339 static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
1340 {
1341         struct yellowfin_private *np = netdev_priv(dev);
1342         void __iomem *ioaddr = np->base;
1343         struct mii_ioctl_data *data = if_mii(rq);
1344
1345         switch(cmd) {
1346         case SIOCGMIIPHY:               /* Get address of MII PHY in use. */
1347                 data->phy_id = np->phys[0] & 0x1f;
1348                 /* Fall Through */
1349
1350         case SIOCGMIIREG:               /* Read MII PHY register. */
1351                 data->val_out = mdio_read(ioaddr, data->phy_id & 0x1f, data->reg_num & 0x1f);
1352                 return 0;
1353
1354         case SIOCSMIIREG:               /* Write MII PHY register. */
1355                 if (!capable(CAP_NET_ADMIN))
1356                         return -EPERM;
1357                 if (data->phy_id == np->phys[0]) {
1358                         u16 value = data->val_in;
1359                         switch (data->reg_num) {
1360                         case 0:
1361                                 /* Check for autonegotiation on or reset. */
1362                                 np->medialock = (value & 0x9000) ? 0 : 1;
1363                                 if (np->medialock)
1364                                         np->full_duplex = (value & 0x0100) ? 1 : 0;
1365                                 break;
1366                         case 4: np->advertising = value; break;
1367                         }
1368                         /* Perhaps check_duplex(dev), depending on chip semantics. */
1369                 }
1370                 mdio_write(ioaddr, data->phy_id & 0x1f, data->reg_num & 0x1f, data->val_in);
1371                 return 0;
1372         default:
1373                 return -EOPNOTSUPP;
1374         }
1375 }
1376
1377
1378 static void __devexit yellowfin_remove_one (struct pci_dev *pdev)
1379 {
1380         struct net_device *dev = pci_get_drvdata(pdev);
1381         struct yellowfin_private *np;
1382
1383         BUG_ON(!dev);
1384         np = netdev_priv(dev);
1385
1386         pci_free_consistent(pdev, STATUS_TOTAL_SIZE, np->tx_status,
1387                 np->tx_status_dma);
1388         pci_free_consistent(pdev, RX_TOTAL_SIZE, np->rx_ring, np->rx_ring_dma);
1389         pci_free_consistent(pdev, TX_TOTAL_SIZE, np->tx_ring, np->tx_ring_dma);
1390         unregister_netdev (dev);
1391
1392         pci_iounmap(pdev, np->base);
1393
1394         pci_release_regions (pdev);
1395
1396         free_netdev (dev);
1397         pci_set_drvdata(pdev, NULL);
1398 }
1399
1400
1401 static struct pci_driver yellowfin_driver = {
1402         .name           = DRV_NAME,
1403         .id_table       = yellowfin_pci_tbl,
1404         .probe          = yellowfin_init_one,
1405         .remove         = __devexit_p(yellowfin_remove_one),
1406 };
1407
1408
1409 static int __init yellowfin_init (void)
1410 {
1411 /* when a module, this is printed whether or not devices are found in probe */
1412 #ifdef MODULE
1413         printk(version);
1414 #endif
1415         return pci_register_driver(&yellowfin_driver);
1416 }
1417
1418
1419 static void __exit yellowfin_cleanup (void)
1420 {
1421         pci_unregister_driver (&yellowfin_driver);
1422 }
1423
1424
1425 module_init(yellowfin_init);
1426 module_exit(yellowfin_cleanup);