drivers/net/wireless/iwlwifi/iwl-6000.c

   1 /******************************************************************************
   2  *
   3  * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
   4  *
   5  * This program is free software; you can redistribute it and/or modify it
   6  * under the terms of version 2 of the GNU General Public License as
   7  * published by the Free Software Foundation.
   8  *
   9  * This program is distributed in the hope that it will be useful, but WITHOUT
  10  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  11  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  12  * more details.
  13  *
  14  * You should have received a copy of the GNU General Public License along with
  15  * this program; if not, write to the Free Software Foundation, Inc.,
  16  * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
  17  *
  18  * The full GNU General Public License is included in this distribution in the
  19  * file called LICENSE.
  20  *
  21  * Contact Information:
  22  *  Intel Linux Wireless <ilw@linux.intel.com>
  23  * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
  24  *
  25  *****************************************************************************/
  26
  27 #include <linux/kernel.h>
  28 #include <linux/module.h>
  29 #include <linux/init.h>
  30 #include <linux/pci.h>
  31 #include <linux/dma-mapping.h>
  32 #include <linux/delay.h>
  33 #include <linux/skbuff.h>
  34 #include <linux/netdevice.h>
  35 #include <linux/wireless.h>
  36 #include <net/mac80211.h>
  37 #include <linux/etherdevice.h>
  38 #include <asm/unaligned.h>
  39 #include <linux/stringify.h>
  40
  41 #include "iwl-eeprom.h"
  42 #include "iwl-dev.h"
  43 #include "iwl-core.h"
  44 #include "iwl-io.h"
  45 #include "iwl-sta.h"
  46 #include "iwl-agn.h"
  47 #include "iwl-helpers.h"
  48 #include "iwl-agn-hw.h"
  49 #include "iwl-6000-hw.h"
  50
  51 /* Highest firmware API version supported */
  52 #define IWL6000_UCODE_API_MAX 4
  53 #define IWL6050_UCODE_API_MAX 5
  54 #define IWL6000G2_UCODE_API_MAX 5
  55
  56 /* Lowest firmware API version supported */
  57 #define IWL6000_UCODE_API_MIN 4
  58 #define IWL6050_UCODE_API_MIN 4
  59 #define IWL6000G2_UCODE_API_MIN 4
  60
  61 #define IWL6000_FW_PRE "iwlwifi-6000-"
  62 #define IWL6000_MODULE_FIRMWARE(api) IWL6000_FW_PRE __stringify(api) ".ucode"
  63
  64 #define IWL6050_FW_PRE "iwlwifi-6050-"
  65 #define IWL6050_MODULE_FIRMWARE(api) IWL6050_FW_PRE __stringify(api) ".ucode"
  66
  67 #define IWL6005_FW_PRE "iwlwifi-6000g2a-"
  68 #define IWL6005_MODULE_FIRMWARE(api) IWL6005_FW_PRE __stringify(api) ".ucode"
  69
  70 #define IWL6030_FW_PRE "iwlwifi-6000g2b-"
  71 #define IWL6030_MODULE_FIRMWARE(api) IWL6030_FW_PRE __stringify(api) ".ucode"
  72
  73 static void iwl6000_set_ct_threshold(struct iwl_priv *priv)
  74 {
  75         /* want Celsius */
  76         priv->hw_params.ct_kill_threshold = CT_KILL_THRESHOLD;
  77         priv->hw_params.ct_kill_exit_threshold = CT_KILL_EXIT_THRESHOLD;
  78 }
  79
  80 static void iwl6050_additional_nic_config(struct iwl_priv *priv)
  81 {
  82         /* Indicate calibration version to uCode. */
  83         if (iwlagn_eeprom_calib_version(priv) >= 6)
  84                 iwl_set_bit(priv, CSR_GP_DRIVER_REG,
  85                                 CSR_GP_DRIVER_REG_BIT_CALIB_VERSION6);
  86 }
  87
  88 static void iwl6150_additional_nic_config(struct iwl_priv *priv)
  89 {
  90         /* Indicate calibration version to uCode. */
  91         if (iwlagn_eeprom_calib_version(priv) >= 6)
  92                 iwl_set_bit(priv, CSR_GP_DRIVER_REG,
  93                                 CSR_GP_DRIVER_REG_BIT_CALIB_VERSION6);
  94         iwl_set_bit(priv, CSR_GP_DRIVER_REG,
  95                     CSR_GP_DRIVER_REG_BIT_6050_1x2);
  96 }
  97
  98 /* NIC configuration for 6000 series */
  99 static void iwl6000_nic_config(struct iwl_priv *priv)
 100 {
 101         u16 radio_cfg;
 102
 103         radio_cfg = iwl_eeprom_query16(priv, EEPROM_RADIO_CONFIG);
 104
 105         /* write radio config values to register */
 106         if (EEPROM_RF_CFG_TYPE_MSK(radio_cfg) <= EEPROM_RF_CONFIG_TYPE_MAX)
 107                 iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
 108                             EEPROM_RF_CFG_TYPE_MSK(radio_cfg) |
 109                             EEPROM_RF_CFG_STEP_MSK(radio_cfg) |
 110                             EEPROM_RF_CFG_DASH_MSK(radio_cfg));
 111
 112         /* set CSR_HW_CONFIG_REG for uCode use */
 113         iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
 114                     CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI |
 115                     CSR_HW_IF_CONFIG_REG_BIT_MAC_SI);
 116
 117         /* no locking required for register write */
 118         if (priv->cfg->pa_type == IWL_PA_INTERNAL) {
 119                 /* 2x2 IPA phy type */
 120                 iwl_write32(priv, CSR_GP_DRIVER_REG,
 121                              CSR_GP_DRIVER_REG_BIT_RADIO_SKU_2x2_IPA);
 122         }
 123         /* do additional nic configuration if needed */
 124         if (priv->cfg->ops->nic &&
 125                 priv->cfg->ops->nic->additional_nic_config) {
 126                         priv->cfg->ops->nic->additional_nic_config(priv);
 127         }
 128 }
 129
 130 static struct iwl_sensitivity_ranges iwl6000_sensitivity = {
 131         .min_nrg_cck = 97,
 132         .max_nrg_cck = 0, /* not used, set to 0 */
 133         .auto_corr_min_ofdm = 80,
 134         .auto_corr_min_ofdm_mrc = 128,
 135         .auto_corr_min_ofdm_x1 = 105,
 136         .auto_corr_min_ofdm_mrc_x1 = 192,
 137
 138         .auto_corr_max_ofdm = 145,
 139         .auto_corr_max_ofdm_mrc = 232,
 140         .auto_corr_max_ofdm_x1 = 110,
 141         .auto_corr_max_ofdm_mrc_x1 = 232,
 142
 143         .auto_corr_min_cck = 125,
 144         .auto_corr_max_cck = 175,
 145         .auto_corr_min_cck_mrc = 160,
 146         .auto_corr_max_cck_mrc = 310,
 147         .nrg_th_cck = 97,
 148         .nrg_th_ofdm = 100,
 149
 150         .barker_corr_th_min = 190,
 151         .barker_corr_th_min_mrc = 390,
 152         .nrg_th_cca = 62,
 153 };
 154
 155 static int iwl6000_hw_set_hw_params(struct iwl_priv *priv)
 156 {
 157         if (iwlagn_mod_params.num_of_queues >= IWL_MIN_NUM_QUEUES &&
 158             iwlagn_mod_params.num_of_queues <= IWLAGN_NUM_QUEUES)
 159                 priv->cfg->base_params->num_of_queues =
 160                         iwlagn_mod_params.num_of_queues;
 161
 162         priv->hw_params.max_txq_num = priv->cfg->base_params->num_of_queues;
 163         priv->hw_params.dma_chnl_num = FH50_TCSR_CHNL_NUM;
 164         priv->hw_params.scd_bc_tbls_size =
 165                         priv->cfg->base_params->num_of_queues *
 166                         sizeof(struct iwlagn_scd_bc_tbl);
 167         priv->hw_params.tfd_size = sizeof(struct iwl_tfd);
 168         priv->hw_params.max_stations = IWLAGN_STATION_COUNT;
 169         priv->contexts[IWL_RXON_CTX_BSS].bcast_sta_id = IWLAGN_BROADCAST_ID;
 170
 171         priv->hw_params.max_data_size = IWL60_RTC_DATA_SIZE;
 172         priv->hw_params.max_inst_size = IWL60_RTC_INST_SIZE;
 173
 174         priv->hw_params.ht40_channel =  BIT(IEEE80211_BAND_2GHZ) |
 175                                         BIT(IEEE80211_BAND_5GHZ);
 176         priv->hw_params.rx_wrt_ptr_reg = FH_RSCSR_CHNL0_WPTR;
 177
 178         priv->hw_params.tx_chains_num = num_of_ant(priv->cfg->valid_tx_ant);
 179         if (priv->cfg->rx_with_siso_diversity)
 180                 priv->hw_params.rx_chains_num = 1;
 181         else
 182                 priv->hw_params.rx_chains_num =
 183                         num_of_ant(priv->cfg->valid_rx_ant);
 184         priv->hw_params.valid_tx_ant = priv->cfg->valid_tx_ant;
 185         priv->hw_params.valid_rx_ant = priv->cfg->valid_rx_ant;
 186
 187         iwl6000_set_ct_threshold(priv);
 188
 189         /* Set initial sensitivity parameters */
 190         /* Set initial calibration set */
 191         priv->hw_params.sens = &iwl6000_sensitivity;
 192         priv->hw_params.calib_init_cfg =
 193                 BIT(IWL_CALIB_XTAL)             |
 194                 BIT(IWL_CALIB_LO)               |
 195                 BIT(IWL_CALIB_TX_IQ)            |
 196                 BIT(IWL_CALIB_BASE_BAND);
 197         if (priv->cfg->need_dc_calib)
 198                 priv->hw_params.calib_rt_cfg |= BIT(IWL_CALIB_CFG_DC_IDX);
 199         if (priv->cfg->need_temp_offset_calib)
 200                 priv->hw_params.calib_init_cfg |= BIT(IWL_CALIB_TEMP_OFFSET);
 201
 202         priv->hw_params.beacon_time_tsf_bits = IWLAGN_EXT_BEACON_TIME_POS;
 203
 204         return 0;
 205 }
 206
 207 static int iwl6000_hw_channel_switch(struct iwl_priv *priv,
 208                                      struct ieee80211_channel_switch *ch_switch)
 209 {
 210         /*
 211          * MULTI-FIXME
 212          * See iwl_mac_channel_switch.
 213          */
 214         struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
 215         struct iwl6000_channel_switch_cmd cmd;
 216         const struct iwl_channel_info *ch_info;
 217         u32 switch_time_in_usec, ucode_switch_time;
 218         u16 ch;
 219         u32 tsf_low;
 220         u8 switch_count;
 221         u16 beacon_interval = le16_to_cpu(ctx->timing.beacon_interval);
 222         struct ieee80211_vif *vif = ctx->vif;
 223         struct iwl_host_cmd hcmd = {
 224                 .id = REPLY_CHANNEL_SWITCH,
 225                 .len = { sizeof(cmd), },
 226                 .flags = CMD_SYNC,
 227                 .data = { &cmd, },
 228         };
 229
 230         cmd.band = priv->band == IEEE80211_BAND_2GHZ;
 231         ch = ch_switch->channel->hw_value;
 232         IWL_DEBUG_11H(priv, "channel switch from %u to %u\n",
 233                       ctx->active.channel, ch);
 234         cmd.channel = cpu_to_le16(ch);
 235         cmd.rxon_flags = ctx->staging.flags;
 236         cmd.rxon_filter_flags = ctx->staging.filter_flags;
 237         switch_count = ch_switch->count;
 238         tsf_low = ch_switch->timestamp & 0x0ffffffff;
 239         /*
 240          * calculate the ucode channel switch time
 241          * adding TSF as one of the factor for when to switch
 242          */
 243         if ((priv->ucode_beacon_time > tsf_low) && beacon_interval) {
 244                 if (switch_count > ((priv->ucode_beacon_time - tsf_low) /
 245                     beacon_interval)) {
 246                         switch_count -= (priv->ucode_beacon_time -
 247                                 tsf_low) / beacon_interval;
 248                 } else
 249                         switch_count = 0;
 250         }
 251         if (switch_count <= 1)
 252                 cmd.switch_time = cpu_to_le32(priv->ucode_beacon_time);
 253         else {
 254                 switch_time_in_usec =
 255                         vif->bss_conf.beacon_int * switch_count * TIME_UNIT;
 256                 ucode_switch_time = iwl_usecs_to_beacons(priv,
 257                                                          switch_time_in_usec,
 258                                                          beacon_interval);
 259                 cmd.switch_time = iwl_add_beacon_time(priv,
 260                                                       priv->ucode_beacon_time,
 261                                                       ucode_switch_time,
 262                                                       beacon_interval);
 263         }
 264         IWL_DEBUG_11H(priv, "uCode time for the switch is 0x%x\n",
 265                       cmd.switch_time);
 266         ch_info = iwl_get_channel_info(priv, priv->band, ch);
 267         if (ch_info)
 268                 cmd.expect_beacon = is_channel_radar(ch_info);
 269         else {
 270                 IWL_ERR(priv, "invalid channel switch from %u to %u\n",
 271                         ctx->active.channel, ch);
 272                 return -EFAULT;
 273         }
 274
 275         return iwl_send_cmd_sync(priv, &hcmd);
 276 }
 277
 278 static struct iwl_lib_ops iwl6000_lib = {
 279         .set_hw_params = iwl6000_hw_set_hw_params,
 280         .rx_handler_setup = iwlagn_rx_handler_setup,
 281         .setup_deferred_work = iwlagn_setup_deferred_work,
 282         .is_valid_rtc_data_addr = iwlagn_hw_valid_rtc_data_addr,
 283         .send_tx_power = iwlagn_send_tx_power,
 284         .update_chain_flags = iwl_update_chain_flags,
 285         .set_channel_switch = iwl6000_hw_channel_switch,
 286         .apm_ops = {
 287                 .init = iwl_apm_init,
 288                 .config = iwl6000_nic_config,
 289         },
 290         .eeprom_ops = {
 291                 .regulatory_bands = {
 292                         EEPROM_REG_BAND_1_CHANNELS,
 293                         EEPROM_REG_BAND_2_CHANNELS,
 294                         EEPROM_REG_BAND_3_CHANNELS,
 295                         EEPROM_REG_BAND_4_CHANNELS,
 296                         EEPROM_REG_BAND_5_CHANNELS,
 297                         EEPROM_6000_REG_BAND_24_HT40_CHANNELS,
 298                         EEPROM_REG_BAND_52_HT40_CHANNELS
 299                 },
 300                 .query_addr = iwlagn_eeprom_query_addr,
 301                 .update_enhanced_txpower = iwlcore_eeprom_enhanced_txpower,
 302         },
 303         .temp_ops = {
 304                 .temperature = iwlagn_temperature,
 305          },
 306         .txfifo_flush = iwlagn_txfifo_flush,
 307         .dev_txfifo_flush = iwlagn_dev_txfifo_flush,
 308 };
 309
 310 static struct iwl_lib_ops iwl6030_lib = {
 311         .set_hw_params = iwl6000_hw_set_hw_params,
 312         .rx_handler_setup = iwlagn_bt_rx_handler_setup,
 313         .setup_deferred_work = iwlagn_bt_setup_deferred_work,
 314         .cancel_deferred_work = iwlagn_bt_cancel_deferred_work,
 315         .is_valid_rtc_data_addr = iwlagn_hw_valid_rtc_data_addr,
 316         .send_tx_power = iwlagn_send_tx_power,
 317         .update_chain_flags = iwl_update_chain_flags,
 318         .set_channel_switch = iwl6000_hw_channel_switch,
 319         .apm_ops = {
 320                 .init = iwl_apm_init,
 321                 .config = iwl6000_nic_config,
 322         },
 323         .eeprom_ops = {
 324                 .regulatory_bands = {
 325                         EEPROM_REG_BAND_1_CHANNELS,
 326                         EEPROM_REG_BAND_2_CHANNELS,
 327                         EEPROM_REG_BAND_3_CHANNELS,
 328                         EEPROM_REG_BAND_4_CHANNELS,
 329                         EEPROM_REG_BAND_5_CHANNELS,
 330                         EEPROM_6000_REG_BAND_24_HT40_CHANNELS,
 331                         EEPROM_REG_BAND_52_HT40_CHANNELS
 332                 },
 333                 .query_addr = iwlagn_eeprom_query_addr,
 334                 .update_enhanced_txpower = iwlcore_eeprom_enhanced_txpower,
 335         },
 336         .temp_ops = {
 337                 .temperature = iwlagn_temperature,
 338          },
 339         .txfifo_flush = iwlagn_txfifo_flush,
 340         .dev_txfifo_flush = iwlagn_dev_txfifo_flush,
 341 };
 342
 343 static struct iwl_nic_ops iwl6050_nic_ops = {
 344         .additional_nic_config = &iwl6050_additional_nic_config,
 345 };
 346
 347 static struct iwl_nic_ops iwl6150_nic_ops = {
 348         .additional_nic_config = &iwl6150_additional_nic_config,
 349 };
 350
 351 static const struct iwl_ops iwl6000_ops = {
 352         .lib = &iwl6000_lib,
 353         .hcmd = &iwlagn_hcmd,
 354         .utils = &iwlagn_hcmd_utils,
 355 };
 356
 357 static const struct iwl_ops iwl6050_ops = {
 358         .lib = &iwl6000_lib,
 359         .hcmd = &iwlagn_hcmd,
 360         .utils = &iwlagn_hcmd_utils,
 361         .nic = &iwl6050_nic_ops,
 362 };
 363
 364 static const struct iwl_ops iwl6150_ops = {
 365         .lib = &iwl6000_lib,
 366         .hcmd = &iwlagn_hcmd,
 367         .utils = &iwlagn_hcmd_utils,
 368         .nic = &iwl6150_nic_ops,
 369 };
 370
 371 static const struct iwl_ops iwl6030_ops = {
 372         .lib = &iwl6030_lib,
 373         .hcmd = &iwlagn_bt_hcmd,
 374         .utils = &iwlagn_hcmd_utils,
 375 };
 376
 377 static struct iwl_base_params iwl6000_base_params = {
 378         .eeprom_size = OTP_LOW_IMAGE_SIZE,
 379         .num_of_queues = IWLAGN_NUM_QUEUES,
 380         .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
 381         .pll_cfg_val = 0,
 382         .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
 383         .shadow_ram_support = true,
 384         .led_compensation = 51,
 385         .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
 386         .adv_thermal_throttle = true,
 387         .support_ct_kill_exit = true,
 388         .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
 389         .chain_noise_scale = 1000,
 390         .wd_timeout = IWL_DEF_WD_TIMEOUT,
 391         .max_event_log_size = 512,
 392         .shadow_reg_enable = true,
 393 };
 394
 395 static struct iwl_base_params iwl6050_base_params = {
 396         .eeprom_size = OTP_LOW_IMAGE_SIZE,
 397         .num_of_queues = IWLAGN_NUM_QUEUES,
 398         .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
 399         .pll_cfg_val = 0,
 400         .max_ll_items = OTP_MAX_LL_ITEMS_6x50,
 401         .shadow_ram_support = true,
 402         .led_compensation = 51,
 403         .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
 404         .adv_thermal_throttle = true,
 405         .support_ct_kill_exit = true,
 406         .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
 407         .chain_noise_scale = 1500,
 408         .wd_timeout = IWL_DEF_WD_TIMEOUT,
 409         .max_event_log_size = 1024,
 410         .shadow_reg_enable = true,
 411 };
 412 static struct iwl_base_params iwl6000_g2_base_params = {
 413         .eeprom_size = OTP_LOW_IMAGE_SIZE,
 414         .num_of_queues = IWLAGN_NUM_QUEUES,
 415         .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
 416         .pll_cfg_val = 0,
 417         .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
 418         .shadow_ram_support = true,
 419         .led_compensation = 57,
 420         .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
 421         .adv_thermal_throttle = true,
 422         .support_ct_kill_exit = true,
 423         .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
 424         .chain_noise_scale = 1000,
 425         .wd_timeout = IWL_LONG_WD_TIMEOUT,
 426         .max_event_log_size = 512,
 427         .shadow_reg_enable = true,
 428 };
 429
 430 static struct iwl_ht_params iwl6000_ht_params = {
 431         .ht_greenfield_support = true,
 432         .use_rts_for_aggregation = true, /* use rts/cts protection */
 433 };
 434
 435 static struct iwl_bt_params iwl6000_bt_params = {
 436         /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
 437         .advanced_bt_coexist = true,
 438         .agg_time_limit = BT_AGG_THRESHOLD_DEF,
 439         .bt_init_traffic_load = IWL_BT_COEX_TRAFFIC_LOAD_NONE,
 440         .bt_prio_boost = IWLAGN_BT_PRIO_BOOST_DEFAULT,
 441         .bt_sco_disable = true,
 442 };
 443
 444 #define IWL_DEVICE_6005                                         \
 445         .fw_name_pre = IWL6005_FW_PRE,                  \
 446         .ucode_api_max = IWL6000G2_UCODE_API_MAX,               \
 447         .ucode_api_min = IWL6000G2_UCODE_API_MIN,               \
 448         .eeprom_ver = EEPROM_6005_EEPROM_VERSION,               \
 449         .eeprom_calib_ver = EEPROM_6005_TX_POWER_VERSION,       \
 450         .ops = &iwl6000_ops,                                    \
 451         .base_params = &iwl6000_g2_base_params,                 \
 452         .need_dc_calib = true,                                  \
 453         .need_temp_offset_calib = true,                         \
 454         .led_mode = IWL_LED_RF_STATE
 455
 456 struct iwl_cfg iwl6005_2agn_cfg = {
 457         .name = "Intel(R) Centrino(R) Advanced-N 6205 AGN",
 458         IWL_DEVICE_6005,
 459         .ht_params = &iwl6000_ht_params,
 460 };
 461
 462 struct iwl_cfg iwl6005_2abg_cfg = {
 463         .name = "Intel(R) Centrino(R) Advanced-N 6205 ABG",
 464         IWL_DEVICE_6005,
 465 };
 466
 467 struct iwl_cfg iwl6005_2bg_cfg = {
 468         .name = "Intel(R) Centrino(R) Advanced-N 6205 BG",
 469         IWL_DEVICE_6005,
 470 };
 471
 472 #define IWL_DEVICE_6030                                         \
 473         .fw_name_pre = IWL6030_FW_PRE,                  \
 474         .ucode_api_max = IWL6000G2_UCODE_API_MAX,               \
 475         .ucode_api_min = IWL6000G2_UCODE_API_MIN,               \
 476         .eeprom_ver = EEPROM_6030_EEPROM_VERSION,               \
 477         .eeprom_calib_ver = EEPROM_6030_TX_POWER_VERSION,       \
 478         .ops = &iwl6030_ops,                                    \
 479         .base_params = &iwl6000_g2_base_params,                 \
 480         .bt_params = &iwl6000_bt_params,                        \
 481         .need_dc_calib = true,                                  \
 482         .need_temp_offset_calib = true,                         \
 483         .led_mode = IWL_LED_RF_STATE,                           \
 484         .adv_pm = true                                          \
 485
 486 struct iwl_cfg iwl6030_2agn_cfg = {
 487         .name = "Intel(R) Centrino(R) Advanced-N 6230 AGN",
 488         IWL_DEVICE_6030,
 489         .ht_params = &iwl6000_ht_params,
 490 };
 491
 492 struct iwl_cfg iwl6030_2abg_cfg = {
 493         .name = "Intel(R) Centrino(R) Advanced-N 6230 ABG",
 494         IWL_DEVICE_6030,
 495 };
 496
 497 struct iwl_cfg iwl6030_2bgn_cfg = {
 498         .name = "Intel(R) Centrino(R) Advanced-N 6230 BGN",
 499         IWL_DEVICE_6030,
 500         .ht_params = &iwl6000_ht_params,
 501 };
 502
 503 struct iwl_cfg iwl6030_2bg_cfg = {
 504         .name = "Intel(R) Centrino(R) Advanced-N 6230 BG",
 505         IWL_DEVICE_6030,
 506 };
 507
 508 struct iwl_cfg iwl6035_2agn_cfg = {
 509         .name = "6035 Series 2x2 AGN/BT",
 510         IWL_DEVICE_6030,
 511         .ht_params = &iwl6000_ht_params,
 512 };
 513
 514 struct iwl_cfg iwl6035_2abg_cfg = {
 515         .name = "6035 Series 2x2 ABG/BT",
 516         IWL_DEVICE_6030,
 517 };
 518
 519 struct iwl_cfg iwl6035_2bg_cfg = {
 520         .name = "6035 Series 2x2 BG/BT",
 521         IWL_DEVICE_6030,
 522 };
 523
 524 struct iwl_cfg iwl1030_bgn_cfg = {
 525         .name = "Intel(R) Centrino(R) Wireless-N 1030 BGN",
 526         IWL_DEVICE_6030,
 527         .ht_params = &iwl6000_ht_params,
 528 };
 529
 530 struct iwl_cfg iwl1030_bg_cfg = {
 531         .name = "Intel(R) Centrino(R) Wireless-N 1030 BG",
 532         IWL_DEVICE_6030,
 533 };
 534
 535 struct iwl_cfg iwl130_bgn_cfg = {
 536         .name = "Intel(R) Centrino(R) Wireless-N 130 BGN",
 537         IWL_DEVICE_6030,
 538         .ht_params = &iwl6000_ht_params,
 539         .rx_with_siso_diversity = true,
 540 };
 541
 542 struct iwl_cfg iwl130_bg_cfg = {
 543         .name = "Intel(R) Centrino(R) Wireless-N 130 BG",
 544         IWL_DEVICE_6030,
 545         .rx_with_siso_diversity = true,
 546 };
 547
 548 /*
 549  * "i": Internal configuration, use internal Power Amplifier
 550  */
 551 #define IWL_DEVICE_6000i                                        \
 552         .fw_name_pre = IWL6000_FW_PRE,                          \
 553         .ucode_api_max = IWL6000_UCODE_API_MAX,                 \
 554         .ucode_api_min = IWL6000_UCODE_API_MIN,                 \
 555         .valid_tx_ant = ANT_BC,         /* .cfg overwrite */    \
 556         .valid_rx_ant = ANT_BC,         /* .cfg overwrite */    \
 557         .eeprom_ver = EEPROM_6000_EEPROM_VERSION,               \
 558         .eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION,       \
 559         .ops = &iwl6000_ops,                                    \
 560         .base_params = &iwl6000_base_params,                    \
 561         .pa_type = IWL_PA_INTERNAL,                             \
 562         .led_mode = IWL_LED_BLINK
 563
 564 struct iwl_cfg iwl6000i_2agn_cfg = {
 565         .name = "Intel(R) Centrino(R) Advanced-N 6200 AGN",
 566         IWL_DEVICE_6000i,
 567         .ht_params = &iwl6000_ht_params,
 568 };
 569
 570 struct iwl_cfg iwl6000i_2abg_cfg = {
 571         .name = "Intel(R) Centrino(R) Advanced-N 6200 ABG",
 572         IWL_DEVICE_6000i,
 573 };
 574
 575 struct iwl_cfg iwl6000i_2bg_cfg = {
 576         .name = "Intel(R) Centrino(R) Advanced-N 6200 BG",
 577         IWL_DEVICE_6000i,
 578 };
 579
 580 #define IWL_DEVICE_6050                                         \
 581         .fw_name_pre = IWL6050_FW_PRE,                          \
 582         .ucode_api_max = IWL6050_UCODE_API_MAX,                 \
 583         .ucode_api_min = IWL6050_UCODE_API_MIN,                 \
 584         .valid_tx_ant = ANT_AB,         /* .cfg overwrite */    \
 585         .valid_rx_ant = ANT_AB,         /* .cfg overwrite */    \
 586         .ops = &iwl6050_ops,                                    \
 587         .eeprom_ver = EEPROM_6050_EEPROM_VERSION,               \
 588         .eeprom_calib_ver = EEPROM_6050_TX_POWER_VERSION,       \
 589         .base_params = &iwl6050_base_params,                    \
 590         .need_dc_calib = true,                                  \
 591         .led_mode = IWL_LED_BLINK,                              \
 592         .internal_wimax_coex = true
 593
 594 struct iwl_cfg iwl6050_2agn_cfg = {
 595         .name = "Intel(R) Centrino(R) Advanced-N + WiMAX 6250 AGN",
 596         IWL_DEVICE_6050,
 597         .ht_params = &iwl6000_ht_params,
 598 };
 599
 600 struct iwl_cfg iwl6050_2abg_cfg = {
 601         .name = "Intel(R) Centrino(R) Advanced-N + WiMAX 6250 ABG",
 602         IWL_DEVICE_6050,
 603 };
 604
 605 #define IWL_DEVICE_6150                                         \
 606         .fw_name_pre = IWL6050_FW_PRE,                          \
 607         .ucode_api_max = IWL6050_UCODE_API_MAX,                 \
 608         .ucode_api_min = IWL6050_UCODE_API_MIN,                 \
 609         .ops = &iwl6150_ops,                                    \
 610         .eeprom_ver = EEPROM_6150_EEPROM_VERSION,               \
 611         .eeprom_calib_ver = EEPROM_6150_TX_POWER_VERSION,       \
 612         .base_params = &iwl6050_base_params,                    \
 613         .need_dc_calib = true,                                  \
 614         .led_mode = IWL_LED_BLINK,                              \
 615         .internal_wimax_coex = true
 616
 617 struct iwl_cfg iwl6150_bgn_cfg = {
 618         .name = "Intel(R) Centrino(R) Wireless-N + WiMAX 6150 BGN",
 619         IWL_DEVICE_6150,
 620         .ht_params = &iwl6000_ht_params,
 621 };
 622
 623 struct iwl_cfg iwl6150_bg_cfg = {
 624         .name = "Intel(R) Centrino(R) Wireless-N + WiMAX 6150 BG",
 625         IWL_DEVICE_6150,
 626 };
 627
 628 struct iwl_cfg iwl6000_3agn_cfg = {
 629         .name = "Intel(R) Centrino(R) Ultimate-N 6300 AGN",
 630         .fw_name_pre = IWL6000_FW_PRE,
 631         .ucode_api_max = IWL6000_UCODE_API_MAX,
 632         .ucode_api_min = IWL6000_UCODE_API_MIN,
 633         .eeprom_ver = EEPROM_6000_EEPROM_VERSION,
 634         .eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION,
 635         .ops = &iwl6000_ops,
 636         .base_params = &iwl6000_base_params,
 637         .ht_params = &iwl6000_ht_params,
 638         .need_dc_calib = true,
 639         .led_mode = IWL_LED_BLINK,
 640 };
 641
 642 MODULE_FIRMWARE(IWL6000_MODULE_FIRMWARE(IWL6000_UCODE_API_MAX));
 643 MODULE_FIRMWARE(IWL6050_MODULE_FIRMWARE(IWL6050_UCODE_API_MAX));
 644 MODULE_FIRMWARE(IWL6005_MODULE_FIRMWARE(IWL6000G2_UCODE_API_MAX));
 645 MODULE_FIRMWARE(IWL6030_MODULE_FIRMWARE(IWL6000G2_UCODE_API_MAX));