drivers/net/wireless/b43/phy_lp.c

   1 /*
   2
   3   Broadcom B43 wireless driver
   4   IEEE 802.11g LP-PHY driver
   5
   6   Copyright (c) 2008-2009 Michael Buesch <mb@bu3sch.de>
   7
   8   This program is free software; you can redistribute it and/or modify
   9   it under the terms of the GNU General Public License as published by
  10   the Free Software Foundation; either version 2 of the License, or
  11   (at your option) any later version.
  12
  13   This program is distributed in the hope that it will be useful,
  14   but WITHOUT ANY WARRANTY; without even the implied warranty of
  15   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16   GNU General Public License for more details.
  17
  18   You should have received a copy of the GNU General Public License
  19   along with this program; see the file COPYING.  If not, write to
  20   the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor,
  21   Boston, MA 02110-1301, USA.
  22
  23 */
  24
  25 #include "b43.h"
  26 #include "main.h"
  27 #include "phy_lp.h"
  28 #include "phy_common.h"
  29 #include "tables_lpphy.h"
  30
  31
  32 static int b43_lpphy_op_allocate(struct b43_wldev *dev)
  33 {
  34         struct b43_phy_lp *lpphy;
  35
  36         lpphy = kzalloc(sizeof(*lpphy), GFP_KERNEL);
  37         if (!lpphy)
  38                 return -ENOMEM;
  39         dev->phy.lp = lpphy;
  40
  41         return 0;
  42 }
  43
  44 static void b43_lpphy_op_prepare_structs(struct b43_wldev *dev)
  45 {
  46         struct b43_phy *phy = &dev->phy;
  47         struct b43_phy_lp *lpphy = phy->lp;
  48
  49         memset(lpphy, 0, sizeof(*lpphy));
  50
  51         //TODO
  52 }
  53
  54 static void b43_lpphy_op_free(struct b43_wldev *dev)
  55 {
  56         struct b43_phy_lp *lpphy = dev->phy.lp;
  57
  58         kfree(lpphy);
  59         dev->phy.lp = NULL;
  60 }
  61
  62 static void lpphy_table_init(struct b43_wldev *dev)
  63 {
  64         //TODO
  65 }
  66
  67 static void lpphy_baseband_rev0_1_init(struct b43_wldev *dev)
  68 {
  69         B43_WARN_ON(1);//TODO rev < 2 not supported, yet.
  70 }
  71
  72 static void lpphy_baseband_rev2plus_init(struct b43_wldev *dev)
  73 {
  74         struct ssb_bus *bus = dev->dev->bus;
  75         struct b43_phy_lp *lpphy = dev->phy.lp;
  76
  77         b43_phy_write(dev, B43_LPPHY_AFE_DAC_CTL, 0x50);
  78         b43_phy_write(dev, B43_LPPHY_AFE_CTL, 0x8800);
  79         b43_phy_write(dev, B43_LPPHY_AFE_CTL_OVR, 0);
  80         b43_phy_write(dev, B43_LPPHY_AFE_CTL_OVRVAL, 0);
  81         b43_phy_write(dev, B43_LPPHY_RF_OVERRIDE_0, 0);
  82         b43_phy_write(dev, B43_LPPHY_RF_OVERRIDE_2, 0);
  83         b43_phy_write(dev, B43_PHY_OFDM(0xF9), 0);
  84         b43_phy_write(dev, B43_LPPHY_TR_LOOKUP_1, 0);
  85         b43_phy_set(dev, B43_LPPHY_ADC_COMPENSATION_CTL, 0x10);
  86         b43_phy_maskset(dev, B43_LPPHY_OFDMSYNCTHRESH0, 0xFF00, 0x78);
  87         b43_phy_maskset(dev, B43_LPPHY_DCOFFSETTRANSIENT, 0xF8FF, 0x200);
  88         b43_phy_maskset(dev, B43_LPPHY_DCOFFSETTRANSIENT, 0xFF00, 0x7F);
  89         b43_phy_maskset(dev, B43_LPPHY_GAINDIRECTMISMATCH, 0xFF0F, 0x40);
  90         b43_phy_maskset(dev, B43_LPPHY_PREAMBLECONFIRMTO, 0xFF00, 0x2);
  91         b43_phy_mask(dev, B43_LPPHY_CRSGAIN_CTL, ~0x4000);
  92         b43_phy_mask(dev, B43_LPPHY_CRSGAIN_CTL, ~0x2000);
  93         b43_phy_set(dev, B43_PHY_OFDM(0x10A), 0x1);
  94         b43_phy_maskset(dev, B43_PHY_OFDM(0x10A), 0xFF01, 0x10);
  95         b43_phy_maskset(dev, B43_PHY_OFDM(0xDF), 0xFF00, 0xF4);
  96         b43_phy_maskset(dev, B43_PHY_OFDM(0xDF), 0x00FF, 0xF100);
  97         b43_phy_write(dev, B43_LPPHY_CLIPTHRESH, 0x48);
  98         b43_phy_maskset(dev, B43_LPPHY_HIGAINDB, 0xFF00, 0x46);
  99         b43_phy_maskset(dev, B43_PHY_OFDM(0xE4), 0xFF00, 0x10);
 100         b43_phy_maskset(dev, B43_LPPHY_PWR_THRESH1, 0xFFF0, 0x9);
 101         b43_phy_mask(dev, B43_LPPHY_GAINDIRECTMISMATCH, ~0xF);
 102         b43_phy_maskset(dev, B43_LPPHY_VERYLOWGAINDB, 0x00FF, 0x5500);
 103         b43_phy_maskset(dev, B43_LPPHY_CLIPCTRTHRESH, 0xF81F, 0xA0);
 104         b43_phy_maskset(dev, B43_LPPHY_GAINDIRECTMISMATCH, 0xE0FF, 0x300);
 105         b43_phy_maskset(dev, B43_LPPHY_HIGAINDB, 0x00FF, 0x2A00);
 106         if ((bus->chip_id == 0x4325) && (bus->chip_rev == 0)) {
 107                 b43_phy_maskset(dev, B43_LPPHY_LOWGAINDB, 0x00FF, 0x2100);
 108                 b43_phy_maskset(dev, B43_LPPHY_VERYLOWGAINDB, 0xFF00, 0xA);
 109         } else {
 110                 b43_phy_maskset(dev, B43_LPPHY_LOWGAINDB, 0x00FF, 0x1E00);
 111                 b43_phy_maskset(dev, B43_LPPHY_VERYLOWGAINDB, 0xFF00, 0xD);
 112         }
 113         b43_phy_maskset(dev, B43_PHY_OFDM(0xFE), 0xFFE0, 0x1F);
 114         b43_phy_maskset(dev, B43_PHY_OFDM(0xFF), 0xFFE0, 0xC);
 115         b43_phy_maskset(dev, B43_PHY_OFDM(0x100), 0xFF00, 0x19);
 116         b43_phy_maskset(dev, B43_PHY_OFDM(0xFF), 0x03FF, 0x3C00);
 117         b43_phy_maskset(dev, B43_PHY_OFDM(0xFE), 0xFC1F, 0x3E0);
 118         b43_phy_maskset(dev, B43_PHY_OFDM(0xFF), 0xFFE0, 0xC);
 119         b43_phy_maskset(dev, B43_PHY_OFDM(0x100), 0x00FF, 0x1900);
 120         b43_phy_maskset(dev, B43_LPPHY_CLIPCTRTHRESH, 0x83FF, 0x5800);
 121         b43_phy_maskset(dev, B43_LPPHY_CLIPCTRTHRESH, 0xFFE0, 0x12);
 122         b43_phy_maskset(dev, B43_LPPHY_GAINMISMATCH, 0x0FFF, 0x9000);
 123
 124         b43_lptab_write(dev, B43_LPTAB16(0x08, 0x14), 0);
 125         b43_lptab_write(dev, B43_LPTAB16(0x08, 0x12), 0x40);
 126
 127         if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) {
 128                 b43_phy_set(dev, B43_LPPHY_CRSGAIN_CTL, 0x40);
 129                 b43_phy_maskset(dev, B43_LPPHY_CRSGAIN_CTL, 0xF0FF, 0xB00);
 130                 b43_phy_maskset(dev, B43_LPPHY_SYNCPEAKCNT, 0xFFF8, 0x6);
 131                 b43_phy_maskset(dev, B43_LPPHY_MINPWR_LEVEL, 0x00FF, 0x9D00);
 132                 b43_phy_maskset(dev, B43_LPPHY_MINPWR_LEVEL, 0xFF00, 0xA1);
 133         } else /* 5GHz */
 134                 b43_phy_mask(dev, B43_LPPHY_CRSGAIN_CTL, ~0x40);
 135
 136         b43_phy_maskset(dev, B43_LPPHY_CRS_ED_THRESH, 0xFF00, 0xB3);
 137         b43_phy_maskset(dev, B43_LPPHY_CRS_ED_THRESH, 0x00FF, 0xAD00);
 138         b43_phy_maskset(dev, B43_LPPHY_INPUT_PWRDB, 0xFF00, lpphy->rx_pwr_offset);
 139         b43_phy_set(dev, B43_LPPHY_RESET_CTL, 0x44);
 140         b43_phy_write(dev, B43_LPPHY_RESET_CTL, 0x80);
 141         b43_phy_write(dev, B43_LPPHY_AFE_RSSI_CTL_0, 0xA954);
 142         b43_phy_write(dev, B43_LPPHY_AFE_RSSI_CTL_1,
 143                       0x2000 | ((u16)lpphy->rssi_gs << 10) |
 144                       ((u16)lpphy->rssi_vc << 4) | lpphy->rssi_vf);
 145 }
 146
 147 static void lpphy_baseband_init(struct b43_wldev *dev)
 148 {
 149         lpphy_table_init(dev);
 150         if (dev->phy.rev >= 2)
 151                 lpphy_baseband_rev2plus_init(dev);
 152         else
 153                 lpphy_baseband_rev0_1_init(dev);
 154 }
 155
 156 struct b2062_freqdata {
 157         u16 freq;
 158         u8 data[6];
 159 };
 160
 161 /* Initialize the 2062 radio. */
 162 static void lpphy_2062_init(struct b43_wldev *dev)
 163 {
 164         struct ssb_bus *bus = dev->dev->bus;
 165         u32 crystalfreq, pdiv, tmp, ref;
 166         unsigned int i;
 167         const struct b2062_freqdata *fd = NULL;
 168
 169         static const struct b2062_freqdata freqdata_tab[] = {
 170                 { .freq = 12000, .data[0] =  6, .data[1] =  6, .data[2] =  6,
 171                                  .data[3] =  6, .data[4] = 10, .data[5] =  6, },
 172                 { .freq = 13000, .data[0] =  4, .data[1] =  4, .data[2] =  4,
 173                                  .data[3] =  4, .data[4] = 11, .data[5] =  7, },
 174                 { .freq = 14400, .data[0] =  3, .data[1] =  3, .data[2] =  3,
 175                                  .data[3] =  3, .data[4] = 12, .data[5] =  7, },
 176                 { .freq = 16200, .data[0] =  3, .data[1] =  3, .data[2] =  3,
 177                                  .data[3] =  3, .data[4] = 13, .data[5] =  8, },
 178                 { .freq = 18000, .data[0] =  2, .data[1] =  2, .data[2] =  2,
 179                                  .data[3] =  2, .data[4] = 14, .data[5] =  8, },
 180                 { .freq = 19200, .data[0] =  1, .data[1] =  1, .data[2] =  1,
 181                                  .data[3] =  1, .data[4] = 14, .data[5] =  9, },
 182         };
 183
 184         b2062_upload_init_table(dev);
 185
 186         b43_radio_write(dev, B2062_N_TX_CTL3, 0);
 187         b43_radio_write(dev, B2062_N_TX_CTL4, 0);
 188         b43_radio_write(dev, B2062_N_TX_CTL5, 0);
 189         b43_radio_write(dev, B2062_N_PDN_CTL0, 0x40);
 190         b43_radio_write(dev, B2062_N_PDN_CTL0, 0);
 191         b43_radio_write(dev, B2062_N_CALIB_TS, 0x10);
 192         b43_radio_write(dev, B2062_N_CALIB_TS, 0);
 193         if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ)
 194                 b43_radio_set(dev, B2062_N_TSSI_CTL0, 0x1);
 195         else
 196                 b43_radio_mask(dev, B2062_N_TSSI_CTL0, ~0x1);
 197
 198         /* Get the crystal freq, in Hz. */
 199         crystalfreq = bus->chipco.pmu.crystalfreq * 1000;
 200
 201         B43_WARN_ON(!(bus->chipco.capabilities & SSB_CHIPCO_CAP_PMU));
 202         B43_WARN_ON(crystalfreq == 0);
 203
 204         if (crystalfreq >= 30000000) {
 205                 pdiv = 1;
 206                 b43_radio_mask(dev, B2062_S_RFPLL_CTL1, 0xFFFB);
 207         } else {
 208                 pdiv = 2;
 209                 b43_radio_set(dev, B2062_S_RFPLL_CTL1, 0x4);
 210         }
 211
 212         tmp = (800000000 * pdiv + crystalfreq) / (32000000 * pdiv);
 213         tmp = (tmp - 1) & 0xFF;
 214         b43_radio_write(dev, B2062_S_RFPLL_CTL18, tmp);
 215
 216         tmp = (2 * crystalfreq + 1000000 * pdiv) / (2000000 * pdiv);
 217         tmp = ((tmp & 0xFF) - 1) & 0xFFFF;
 218         b43_radio_write(dev, B2062_S_RFPLL_CTL19, tmp);
 219
 220         ref = (1000 * pdiv + 2 * crystalfreq) / (2000 * pdiv);
 221         ref &= 0xFFFF;
 222         for (i = 0; i < ARRAY_SIZE(freqdata_tab); i++) {
 223                 if (ref < freqdata_tab[i].freq) {
 224                         fd = &freqdata_tab[i];
 225                         break;
 226                 }
 227         }
 228         if (!fd)
 229                 fd = &freqdata_tab[ARRAY_SIZE(freqdata_tab) - 1];
 230         b43dbg(dev->wl, "b2062: Using crystal tab entry %u kHz.\n",
 231                fd->freq); /* FIXME: Keep this printk until the code is fully debugged. */
 232
 233         b43_radio_write(dev, B2062_S_RFPLL_CTL8,
 234                         ((u16)(fd->data[1]) << 4) | fd->data[0]);
 235         b43_radio_write(dev, B2062_S_RFPLL_CTL9,
 236                         ((u16)(fd->data[3]) << 4) | fd->data[2]);
 237         b43_radio_write(dev, B2062_S_RFPLL_CTL10, fd->data[4]);
 238         b43_radio_write(dev, B2062_S_RFPLL_CTL11, fd->data[5]);
 239 }
 240
 241 /* Initialize the 2063 radio. */
 242 static void lpphy_2063_init(struct b43_wldev *dev)
 243 {
 244         //TODO
 245 }
 246
 247 static void lpphy_sync_stx(struct b43_wldev *dev)
 248 {
 249         //TODO
 250 }
 251
 252 static void lpphy_radio_init(struct b43_wldev *dev)
 253 {
 254         /* The radio is attached through the 4wire bus. */
 255         b43_phy_set(dev, B43_LPPHY_FOURWIRE_CTL, 0x2);
 256         udelay(1);
 257         b43_phy_mask(dev, B43_LPPHY_FOURWIRE_CTL, 0xFFFD);
 258         udelay(1);
 259
 260         if (dev->phy.rev < 2) {
 261                 lpphy_2062_init(dev);
 262         } else {
 263                 lpphy_2063_init(dev);
 264                 lpphy_sync_stx(dev);
 265                 b43_phy_write(dev, B43_PHY_OFDM(0xF0), 0x5F80);
 266                 b43_phy_write(dev, B43_PHY_OFDM(0xF1), 0);
 267                 //TODO Do something on the backplane
 268         }
 269 }
 270
 271 /* Read the TX power control mode from hardware. */
 272 static void lpphy_read_tx_pctl_mode_from_hardware(struct b43_wldev *dev)
 273 {
 274         struct b43_phy_lp *lpphy = dev->phy.lp;
 275         u16 ctl;
 276
 277         ctl = b43_phy_read(dev, B43_LPPHY_TX_PWR_CTL_CMD);
 278         switch (ctl & B43_LPPHY_TX_PWR_CTL_CMD_MODE) {
 279         case B43_LPPHY_TX_PWR_CTL_CMD_MODE_OFF:
 280                 lpphy->txpctl_mode = B43_LPPHY_TXPCTL_OFF;
 281                 break;
 282         case B43_LPPHY_TX_PWR_CTL_CMD_MODE_SW:
 283                 lpphy->txpctl_mode = B43_LPPHY_TXPCTL_SW;
 284                 break;
 285         case B43_LPPHY_TX_PWR_CTL_CMD_MODE_HW:
 286                 lpphy->txpctl_mode = B43_LPPHY_TXPCTL_HW;
 287                 break;
 288         default:
 289                 lpphy->txpctl_mode = B43_LPPHY_TXPCTL_UNKNOWN;
 290                 B43_WARN_ON(1);
 291                 break;
 292         }
 293 }
 294
 295 /* Set the TX power control mode in hardware. */
 296 static void lpphy_write_tx_pctl_mode_to_hardware(struct b43_wldev *dev)
 297 {
 298         struct b43_phy_lp *lpphy = dev->phy.lp;
 299         u16 ctl;
 300
 301         switch (lpphy->txpctl_mode) {
 302         case B43_LPPHY_TXPCTL_OFF:
 303                 ctl = B43_LPPHY_TX_PWR_CTL_CMD_MODE_OFF;
 304                 break;
 305         case B43_LPPHY_TXPCTL_HW:
 306                 ctl = B43_LPPHY_TX_PWR_CTL_CMD_MODE_HW;
 307                 break;
 308         case B43_LPPHY_TXPCTL_SW:
 309                 ctl = B43_LPPHY_TX_PWR_CTL_CMD_MODE_SW;
 310                 break;
 311         default:
 312                 ctl = 0;
 313                 B43_WARN_ON(1);
 314         }
 315         b43_phy_maskset(dev, B43_LPPHY_TX_PWR_CTL_CMD,
 316                         (u16)~B43_LPPHY_TX_PWR_CTL_CMD_MODE, ctl);
 317 }
 318
 319 static void lpphy_set_tx_power_control(struct b43_wldev *dev,
 320                                        enum b43_lpphy_txpctl_mode mode)
 321 {
 322         struct b43_phy_lp *lpphy = dev->phy.lp;
 323         enum b43_lpphy_txpctl_mode oldmode;
 324
 325         oldmode = lpphy->txpctl_mode;
 326         lpphy_read_tx_pctl_mode_from_hardware(dev);
 327         if (lpphy->txpctl_mode == mode)
 328                 return;
 329         lpphy->txpctl_mode = mode;
 330
 331         if (oldmode == B43_LPPHY_TXPCTL_HW) {
 332                 //TODO Update TX Power NPT
 333                 //TODO Clear all TX Power offsets
 334         } else {
 335                 if (mode == B43_LPPHY_TXPCTL_HW) {
 336                         //TODO Recalculate target TX power
 337                         b43_phy_maskset(dev, B43_LPPHY_TX_PWR_CTL_CMD,
 338                                         0xFF80, lpphy->tssi_idx);
 339                         b43_phy_maskset(dev, B43_LPPHY_TX_PWR_CTL_NNUM,
 340                                         0x8FFF, ((u16)lpphy->tssi_npt << 16));
 341                         //TODO Set "TSSI Transmit Count" variable to total transmitted frame count
 342                         //TODO Disable TX gain override
 343                         lpphy->tx_pwr_idx_over = -1;
 344                 }
 345         }
 346         if (dev->phy.rev >= 2) {
 347                 if (mode == B43_LPPHY_TXPCTL_HW)
 348                         b43_phy_maskset(dev, B43_PHY_OFDM(0xD0), 0xFD, 0x2);
 349                 else
 350                         b43_phy_maskset(dev, B43_PHY_OFDM(0xD0), 0xFD, 0);
 351         }
 352         lpphy_write_tx_pctl_mode_to_hardware(dev);
 353 }
 354
 355 static void lpphy_set_tx_power_by_index(struct b43_wldev *dev, u8 index)
 356 {
 357         struct b43_phy_lp *lpphy = dev->phy.lp;
 358
 359         lpphy->tx_pwr_idx_over = index;
 360         if (lpphy->txpctl_mode != B43_LPPHY_TXPCTL_OFF)
 361                 lpphy_set_tx_power_control(dev, B43_LPPHY_TXPCTL_SW);
 362
 363         //TODO
 364 }
 365
 366 static void lpphy_btcoex_override(struct b43_wldev *dev)
 367 {
 368         b43_write16(dev, B43_MMIO_BTCOEX_CTL, 0x3);
 369         b43_write16(dev, B43_MMIO_BTCOEX_TXCTL, 0xFF);
 370 }
 371
 372 static void lpphy_pr41573_workaround(struct b43_wldev *dev)
 373 {
 374         struct b43_phy_lp *lpphy = dev->phy.lp;
 375         u32 *saved_tab;
 376         const unsigned int saved_tab_size = 256;
 377         enum b43_lpphy_txpctl_mode txpctl_mode;
 378         s8 tx_pwr_idx_over;
 379         u16 tssi_npt, tssi_idx;
 380
 381         saved_tab = kcalloc(saved_tab_size, sizeof(saved_tab[0]), GFP_KERNEL);
 382         if (!saved_tab) {
 383                 b43err(dev->wl, "PR41573 failed. Out of memory!\n");
 384                 return;
 385         }
 386
 387         lpphy_read_tx_pctl_mode_from_hardware(dev);
 388         txpctl_mode = lpphy->txpctl_mode;
 389         tx_pwr_idx_over = lpphy->tx_pwr_idx_over;
 390         tssi_npt = lpphy->tssi_npt;
 391         tssi_idx = lpphy->tssi_idx;
 392
 393         if (dev->phy.rev < 2) {
 394                 b43_lptab_read_bulk(dev, B43_LPTAB32(10, 0x140),
 395                                     saved_tab_size, saved_tab);
 396         } else {
 397                 b43_lptab_read_bulk(dev, B43_LPTAB32(7, 0x140),
 398                                     saved_tab_size, saved_tab);
 399         }
 400         //TODO
 401
 402         kfree(saved_tab);
 403 }
 404
 405 static void lpphy_calibration(struct b43_wldev *dev)
 406 {
 407         struct b43_phy_lp *lpphy = dev->phy.lp;
 408         enum b43_lpphy_txpctl_mode saved_pctl_mode;
 409
 410         b43_mac_suspend(dev);
 411
 412         lpphy_btcoex_override(dev);
 413         lpphy_read_tx_pctl_mode_from_hardware(dev);
 414         saved_pctl_mode = lpphy->txpctl_mode;
 415         lpphy_set_tx_power_control(dev, B43_LPPHY_TXPCTL_OFF);
 416         //TODO Perform transmit power table I/Q LO calibration
 417         if ((dev->phy.rev == 0) && (saved_pctl_mode != B43_LPPHY_TXPCTL_OFF))
 418                 lpphy_pr41573_workaround(dev);
 419         //TODO If a full calibration has not been performed on this channel yet, perform PAPD TX-power calibration
 420         lpphy_set_tx_power_control(dev, saved_pctl_mode);
 421         //TODO Perform I/Q calibration with a single control value set
 422
 423         b43_mac_enable(dev);
 424 }
 425
 426 /* Initialize TX power control */
 427 static void lpphy_tx_pctl_init(struct b43_wldev *dev)
 428 {
 429         if (0/*FIXME HWPCTL capable */) {
 430                 //TODO
 431         } else { /* This device is only software TX power control capable. */
 432                 if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) {
 433                         //TODO
 434                 } else {
 435                         //TODO
 436                 }
 437                 //TODO set BB multiplier to 0x0096
 438         }
 439 }
 440
 441 static int b43_lpphy_op_init(struct b43_wldev *dev)
 442 {
 443         /* TODO: band SPROM */
 444         lpphy_baseband_init(dev);
 445         lpphy_radio_init(dev);
 446         //TODO calibrate RC
 447         //TODO set channel
 448         lpphy_tx_pctl_init(dev);
 449         //TODO full calib
 450
 451         return 0;
 452 }
 453
 454 static u16 b43_lpphy_op_read(struct b43_wldev *dev, u16 reg)
 455 {
 456         b43_write16(dev, B43_MMIO_PHY_CONTROL, reg);
 457         return b43_read16(dev, B43_MMIO_PHY_DATA);
 458 }
 459
 460 static void b43_lpphy_op_write(struct b43_wldev *dev, u16 reg, u16 value)
 461 {
 462         b43_write16(dev, B43_MMIO_PHY_CONTROL, reg);
 463         b43_write16(dev, B43_MMIO_PHY_DATA, value);
 464 }
 465
 466 static u16 b43_lpphy_op_radio_read(struct b43_wldev *dev, u16 reg)
 467 {
 468         /* Register 1 is a 32-bit register. */
 469         B43_WARN_ON(reg == 1);
 470         /* LP-PHY needs a special bit set for read access */
 471         if (dev->phy.rev < 2) {
 472                 if (reg != 0x4001)
 473                         reg |= 0x100;
 474         } else
 475                 reg |= 0x200;
 476
 477         b43_write16(dev, B43_MMIO_RADIO_CONTROL, reg);
 478         return b43_read16(dev, B43_MMIO_RADIO_DATA_LOW);
 479 }
 480
 481 static void b43_lpphy_op_radio_write(struct b43_wldev *dev, u16 reg, u16 value)
 482 {
 483         /* Register 1 is a 32-bit register. */
 484         B43_WARN_ON(reg == 1);
 485
 486         b43_write16(dev, B43_MMIO_RADIO_CONTROL, reg);
 487         b43_write16(dev, B43_MMIO_RADIO_DATA_LOW, value);
 488 }
 489
 490 static void b43_lpphy_op_software_rfkill(struct b43_wldev *dev,
 491                                          bool blocked)
 492 {
 493         //TODO
 494 }
 495
 496 static int b43_lpphy_op_switch_channel(struct b43_wldev *dev,
 497                                        unsigned int new_channel)
 498 {
 499         //TODO
 500         return 0;
 501 }
 502
 503 static unsigned int b43_lpphy_op_get_default_chan(struct b43_wldev *dev)
 504 {
 505         if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ)
 506                 return 1;
 507         return 36;
 508 }
 509
 510 static void b43_lpphy_op_set_rx_antenna(struct b43_wldev *dev, int antenna)
 511 {
 512         //TODO
 513 }
 514
 515 static void b43_lpphy_op_adjust_txpower(struct b43_wldev *dev)
 516 {
 517         //TODO
 518 }
 519
 520 static enum b43_txpwr_result b43_lpphy_op_recalc_txpower(struct b43_wldev *dev,
 521                                                          bool ignore_tssi)
 522 {
 523         //TODO
 524         return B43_TXPWR_RES_DONE;
 525 }
 526
 527
 528 const struct b43_phy_operations b43_phyops_lp = {
 529         .allocate               = b43_lpphy_op_allocate,
 530         .free                   = b43_lpphy_op_free,
 531         .prepare_structs        = b43_lpphy_op_prepare_structs,
 532         .init                   = b43_lpphy_op_init,
 533         .phy_read               = b43_lpphy_op_read,
 534         .phy_write              = b43_lpphy_op_write,
 535         .radio_read             = b43_lpphy_op_radio_read,
 536         .radio_write            = b43_lpphy_op_radio_write,
 537         .software_rfkill        = b43_lpphy_op_software_rfkill,
 538         .switch_analog          = b43_phyop_switch_analog_generic,
 539         .switch_channel         = b43_lpphy_op_switch_channel,
 540         .get_default_chan       = b43_lpphy_op_get_default_chan,
 541         .set_rx_antenna         = b43_lpphy_op_set_rx_antenna,
 542         .recalc_txpower         = b43_lpphy_op_recalc_txpower,
 543         .adjust_txpower         = b43_lpphy_op_adjust_txpower,
 544 };