drivers/net/wan/pc300_drv.c

   1 #define USE_PCI_CLOCK
   2 static char rcsid[] =
   3 "Revision: 3.4.5 Date: 2002/03/07 ";
   4
   5 /*
   6  * pc300.c      Cyclades-PC300(tm) Driver.
   7  *
   8  * Author:      Ivan Passos <ivan@cyclades.com>
   9  * Maintainer:  PC300 Maintainer <pc300@cyclades.com>
  10  *
  11  * Copyright:   (c) 1999-2003 Cyclades Corp.
  12  *
  13  *      This program is free software; you can redistribute it and/or
  14  *      modify it under the terms of the GNU General Public License
  15  *      as published by the Free Software Foundation; either version
  16  *      2 of the License, or (at your option) any later version.
  17  *
  18  *      Using tabstop = 4.
  19  *
  20  * $Log: pc300_drv.c,v $
  21  * Revision 3.23  2002/03/20 13:58:40  henrique
  22  * Fixed ortographic mistakes
  23  *
  24  * Revision 3.22  2002/03/13 16:56:56  henrique
  25  * Take out the debug messages
  26  *
  27  * Revision 3.21  2002/03/07 14:17:09  henrique
  28  * License data fixed
  29  *
  30  * Revision 3.20  2002/01/17 17:58:52  ivan
  31  * Support for PC300-TE/M (PMC).
  32  *
  33  * Revision 3.19  2002/01/03 17:08:47  daniela
  34  * Enables DMA reception when the SCA-II disables it improperly.
  35  *
  36  * Revision 3.18  2001/12/03 18:47:50  daniela
  37  * Esthetic changes.
  38  *
  39  * Revision 3.17  2001/10/19 16:50:13  henrique
  40  * Patch to kernel 2.4.12 and new generic hdlc.
  41  *
  42  * Revision 3.16  2001/10/16 15:12:31  regina
  43  * clear statistics
  44  *
  45  * Revision 3.11 to 3.15  2001/10/11 20:26:04  daniela
  46  * More DMA fixes for noisy lines.
  47  * Return the size of bad frames in dma_get_rx_frame_size, so that the Rx buffer
  48  * descriptors can be cleaned by dma_buf_read (called in cpc_net_rx).
  49  * Renamed dma_start routine to rx_dma_start. Improved Rx statistics.
  50  * Fixed BOF interrupt treatment. Created dma_start routine.
  51  * Changed min and max to cpc_min and cpc_max.
  52  *
  53  * Revision 3.10  2001/08/06 12:01:51  regina
  54  * Fixed problem in DSR_DE bit.
  55  *
  56  * Revision 3.9  2001/07/18 19:27:26  daniela
  57  * Added some history comments.
  58  *
  59  * Revision 3.8  2001/07/12 13:11:19  regina
  60  * bug fix - DCD-OFF in pc300 tty driver
  61  *
  62  * Revision 3.3 to 3.7  2001/07/06 15:00:20  daniela
  63  * Removing kernel 2.4.3 and previous support.
  64  * DMA transmission bug fix.
  65  * MTU check in cpc_net_rx fixed.
  66  * Boot messages reviewed.
  67  * New configuration parameters (line code, CRC calculation and clock).
  68  *
  69  * Revision 3.2 2001/06/22 13:13:02  regina
  70  * MLPPP implementation. Changed the header of message trace to include
  71  * the device name. New format : "hdlcX[R/T]: ".
  72  * Default configuration changed.
  73  *
  74  * Revision 3.1 2001/06/15 regina
  75  * in cpc_queue_xmit, netif_stop_queue is called if don't have free descriptor
  76  * upping major version number
  77  *
  78  * Revision 1.1.1.1  2001/06/13 20:25:04  daniela
  79  * PC300 initial CVS version (3.4.0-pre1)
  80  *
  81  * Revision 3.0.1.2 2001/06/08 daniela
  82  * Did some changes in the DMA programming implementation to avoid the
  83  * occurrence of a SCA-II bug when CDA is accessed during a DMA transfer.
  84  *
  85  * Revision 3.0.1.1 2001/05/02 daniela
  86  * Added kernel 2.4.3 support.
  87  *
  88  * Revision 3.0.1.0 2001/03/13 daniela, henrique
  89  * Added Frame Relay Support.
  90  * Driver now uses HDLC generic driver to provide protocol support.
  91  *
  92  * Revision 3.0.0.8 2001/03/02 daniela
  93  * Fixed ram size detection.
  94  * Changed SIOCGPC300CONF ioctl, to give hw information to pc300util.
  95  *
  96  * Revision 3.0.0.7 2001/02/23 daniela
  97  * netif_stop_queue called before the SCA-II transmition commands in
  98  * cpc_queue_xmit, and with interrupts disabled to avoid race conditions with
  99  * transmition interrupts.
 100  * Fixed falc_check_status for Unframed E1.
 101  *
 102  * Revision 3.0.0.6 2000/12/13 daniela
 103  * Implemented pc300util support: trace, statistics, status and loopback
 104  * tests for the PC300 TE boards.
 105  *
 106  * Revision 3.0.0.5 2000/12/12 ivan
 107  * Added support for Unframed E1.
 108  * Implemented monitor mode.
 109  * Fixed DCD sensitivity on the second channel.
 110  * Driver now complies with new PCI kernel architecture.
 111  *
 112  * Revision 3.0.0.4 2000/09/28 ivan
 113  * Implemented DCD sensitivity.
 114  * Moved hardware-specific open to the end of cpc_open, to avoid race
 115  * conditions with early reception interrupts.
 116  * Included code for [request|release]_mem_region().
 117  * Changed location of pc300.h .
 118  * Minor code revision (contrib. of Jeff Garzik).
 119  *
 120  * Revision 3.0.0.3 2000/07/03 ivan
 121  * Previous bugfix for the framing errors with external clock made X21
 122  * boards stop working. This version fixes it.
 123  *
 124  * Revision 3.0.0.2 2000/06/23 ivan
 125  * Revisited cpc_queue_xmit to prevent race conditions on Tx DMA buffer
 126  * handling when Tx timeouts occur.
 127  * Revisited Rx statistics.
 128  * Fixed a bug in the SCA-II programming that would cause framing errors
 129  * when external clock was configured.
 130  *
 131  * Revision 3.0.0.1 2000/05/26 ivan
 132  * Added logic in the SCA interrupt handler so that no board can monopolize
 133  * the driver.
 134  * Request PLX I/O region, although driver doesn't use it, to avoid
 135  * problems with other drivers accessing it.
 136  *
 137  * Revision 3.0.0.0 2000/05/15 ivan
 138  * Did some changes in the DMA programming implementation to avoid the
 139  * occurrence of a SCA-II bug in the second channel.
 140  * Implemented workaround for PLX9050 bug that would cause a system lockup
 141  * in certain systems, depending on the MMIO addresses allocated to the
 142  * board.
 143  * Fixed the FALC chip programming to avoid synchronization problems in the
 144  * second channel (TE only).
 145  * Implemented a cleaner and faster Tx DMA descriptor cleanup procedure in
 146  * cpc_queue_xmit().
 147  * Changed the built-in driver implementation so that the driver can use the
 148  * general 'hdlcN' naming convention instead of proprietary device names.
 149  * Driver load messages are now device-centric, instead of board-centric.
 150  * Dynamic allocation of net_device structures.
 151  * Code is now compliant with the new module interface (module_[init|exit]).
 152  * Make use of the PCI helper functions to access PCI resources.
 153  *
 154  * Revision 2.0.0.0 2000/04/15 ivan
 155  * Added support for the PC300/TE boards (T1/FT1/E1/FE1).
 156  *
 157  * Revision 1.1.0.0 2000/02/28 ivan
 158  * Major changes in the driver architecture.
 159  * Softnet compliancy implemented.
 160  * Driver now reports physical instead of virtual memory addresses.
 161  * Added cpc_change_mtu function.
 162  *
 163  * Revision 1.0.0.0 1999/12/16 ivan
 164  * First official release.
 165  * Support for 1- and 2-channel boards (which use distinct PCI Device ID's).
 166  * Support for monolythic installation (i.e., drv built into the kernel).
 167  * X.25 additional checking when lapb_[dis]connect_request returns an error.
 168  * SCA programming now covers X.21 as well.
 169  *
 170  * Revision 0.3.1.0 1999/11/18 ivan
 171  * Made X.25 support configuration-dependent (as it depends on external
 172  * modules to work).
 173  * Changed X.25-specific function names to comply with adopted convention.
 174  * Fixed typos in X.25 functions that would cause compile errors (Daniela).
 175  * Fixed bug in ch_config that would disable interrupts on a previously
 176  * enabled channel if the other channel on the same board was enabled later.
 177  *
 178  * Revision 0.3.0.0 1999/11/16 daniela
 179  * X.25 support.
 180  *
 181  * Revision 0.2.3.0 1999/11/15 ivan
 182  * Function cpc_ch_status now provides more detailed information.
 183  * Added support for X.21 clock configuration.
 184  * Changed TNR1 setting in order to prevent Tx FIFO overaccesses by the SCA.
 185  * Now using PCI clock instead of internal oscillator clock for the SCA.
 186  *
 187  * Revision 0.2.2.0 1999/11/10 ivan
 188  * Changed the *_dma_buf_check functions so that they would print only
 189  * the useful info instead of the whole buffer descriptor bank.
 190  * Fixed bug in cpc_queue_xmit that would eventually crash the system
 191  * in case of a packet drop.
 192  * Implemented TX underrun handling.
 193  * Improved SCA fine tuning to boost up its performance.
 194  *
 195  * Revision 0.2.1.0 1999/11/03 ivan
 196  * Added functions *dma_buf_pt_init to allow independent initialization
 197  * of the next-descr. and DMA buffer pointers on the DMA descriptors.
 198  * Kernel buffer release and tbusy clearing is now done in the interrupt
 199  * handler.
 200  * Fixed bug in cpc_open that would cause an interface reopen to fail.
 201  * Added a protocol-specific code section in cpc_net_rx.
 202  * Removed printk level defs (they might be added back after the beta phase).
 203  *
 204  * Revision 0.2.0.0 1999/10/28 ivan
 205  * Revisited the code so that new protocols can be easily added / supported.
 206  *
 207  * Revision 0.1.0.1 1999/10/20 ivan
 208  * Mostly "esthetic" changes.
 209  *
 210  * Revision 0.1.0.0 1999/10/11 ivan
 211  * Initial version.
 212  *
 213  */
 214
 215 #include <linux/module.h>
 216 #include <linux/kernel.h>
 217 #include <linux/mm.h>
 218 #include <linux/ioport.h>
 219 #include <linux/pci.h>
 220 #include <linux/errno.h>
 221 #include <linux/string.h>
 222 #include <linux/init.h>
 223 #include <linux/delay.h>
 224 #include <linux/net.h>
 225 #include <linux/skbuff.h>
 226 #include <linux/if_arp.h>
 227 #include <linux/netdevice.h>
 228 #include <linux/etherdevice.h>
 229 #include <linux/spinlock.h>
 230 #include <linux/if.h>
 231 #include <net/arp.h>
 232
 233 #include <asm/io.h>
 234 #include <asm/uaccess.h>
 235
 236 #include "pc300.h"
 237
 238 #define CPC_LOCK(card,flags)            \
 239                 do {                                            \
 240                 spin_lock_irqsave(&card->card_lock, flags);     \
 241                 } while (0)
 242
 243 #define CPC_UNLOCK(card,flags)                  \
 244                 do {                                                    \
 245                 spin_unlock_irqrestore(&card->card_lock, flags);        \
 246                 } while (0)
 247
 248 #undef  PC300_DEBUG_PCI
 249 #undef  PC300_DEBUG_INTR
 250 #undef  PC300_DEBUG_TX
 251 #undef  PC300_DEBUG_RX
 252 #undef  PC300_DEBUG_OTHER
 253
 254 static struct pci_device_id cpc_pci_dev_id[] __devinitdata = {
 255         /* PC300/RSV or PC300/X21, 2 chan */
 256         {0x120e, 0x300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0x300},
 257         /* PC300/RSV or PC300/X21, 1 chan */
 258         {0x120e, 0x301, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0x301},
 259         /* PC300/TE, 2 chan */
 260         {0x120e, 0x310, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0x310},
 261         /* PC300/TE, 1 chan */
 262         {0x120e, 0x311, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0x311},
 263         /* PC300/TE-M, 2 chan */
 264         {0x120e, 0x320, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0x320},
 265         /* PC300/TE-M, 1 chan */
 266         {0x120e, 0x321, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0x321},
 267         /* End of table */
 268         {0,},
 269 };
 270 MODULE_DEVICE_TABLE(pci, cpc_pci_dev_id);
 271
 272 #ifndef cpc_min
 273 #define cpc_min(a,b)    (((a)<(b))?(a):(b))
 274 #endif
 275 #ifndef cpc_max
 276 #define cpc_max(a,b)    (((a)>(b))?(a):(b))
 277 #endif
 278
 279 /* prototypes */
 280 static void tx_dma_buf_pt_init(pc300_t *, int);
 281 static void tx_dma_buf_init(pc300_t *, int);
 282 static void rx_dma_buf_pt_init(pc300_t *, int);
 283 static void rx_dma_buf_init(pc300_t *, int);
 284 static void tx_dma_buf_check(pc300_t *, int);
 285 static void rx_dma_buf_check(pc300_t *, int);
 286 static irqreturn_t cpc_intr(int, void *);
 287 static int clock_rate_calc(u32, u32, int *);
 288 static u32 detect_ram(pc300_t *);
 289 static void plx_init(pc300_t *);
 290 static void cpc_trace(struct net_device *, struct sk_buff *, char);
 291 static int cpc_attach(struct net_device *, unsigned short, unsigned short);
 292 static int cpc_close(struct net_device *dev);
 293
 294 #ifdef CONFIG_PC300_MLPPP
 295 void cpc_tty_init(pc300dev_t * dev);
 296 void cpc_tty_unregister_service(pc300dev_t * pc300dev);
 297 void cpc_tty_receive(pc300dev_t * pc300dev);
 298 void cpc_tty_trigger_poll(pc300dev_t * pc300dev);
 299 void cpc_tty_reset_var(void);
 300 #endif
 301
 302 /************************/
 303 /***   DMA Routines   ***/
 304 /************************/
 305 static void tx_dma_buf_pt_init(pc300_t * card, int ch)
 306 {
 307         int i;
 308         int ch_factor = ch * N_DMA_TX_BUF;
 309         volatile pcsca_bd_t __iomem *ptdescr = (card->hw.rambase
 310                                        + DMA_TX_BD_BASE + ch_factor * sizeof(pcsca_bd_t));
 311
 312         for (i = 0; i < N_DMA_TX_BUF; i++, ptdescr++) {
 313                 cpc_writel(&ptdescr->next, (u32)(DMA_TX_BD_BASE +
 314                         (ch_factor + ((i + 1) & (N_DMA_TX_BUF - 1))) * sizeof(pcsca_bd_t)));
 315                 cpc_writel(&ptdescr->ptbuf,
 316                            (u32)(DMA_TX_BASE + (ch_factor + i) * BD_DEF_LEN));
 317         }
 318 }
 319
 320 static void tx_dma_buf_init(pc300_t * card, int ch)
 321 {
 322         int i;
 323         int ch_factor = ch * N_DMA_TX_BUF;
 324         volatile pcsca_bd_t __iomem *ptdescr = (card->hw.rambase
 325                                + DMA_TX_BD_BASE + ch_factor * sizeof(pcsca_bd_t));
 326
 327         for (i = 0; i < N_DMA_TX_BUF; i++, ptdescr++) {
 328                 memset_io(ptdescr, 0, sizeof(pcsca_bd_t));
 329                 cpc_writew(&ptdescr->len, 0);
 330                 cpc_writeb(&ptdescr->status, DST_OSB);
 331         }
 332         tx_dma_buf_pt_init(card, ch);
 333 }
 334
 335 static void rx_dma_buf_pt_init(pc300_t * card, int ch)
 336 {
 337         int i;
 338         int ch_factor = ch * N_DMA_RX_BUF;
 339         volatile pcsca_bd_t __iomem *ptdescr = (card->hw.rambase
 340                                        + DMA_RX_BD_BASE + ch_factor * sizeof(pcsca_bd_t));
 341
 342         for (i = 0; i < N_DMA_RX_BUF; i++, ptdescr++) {
 343                 cpc_writel(&ptdescr->next, (u32)(DMA_RX_BD_BASE +
 344                         (ch_factor + ((i + 1) & (N_DMA_RX_BUF - 1))) * sizeof(pcsca_bd_t)));
 345                 cpc_writel(&ptdescr->ptbuf,
 346                            (u32)(DMA_RX_BASE + (ch_factor + i) * BD_DEF_LEN));
 347         }
 348 }
 349
 350 static void rx_dma_buf_init(pc300_t * card, int ch)
 351 {
 352         int i;
 353         int ch_factor = ch * N_DMA_RX_BUF;
 354         volatile pcsca_bd_t __iomem *ptdescr = (card->hw.rambase
 355                                        + DMA_RX_BD_BASE + ch_factor * sizeof(pcsca_bd_t));
 356
 357         for (i = 0; i < N_DMA_RX_BUF; i++, ptdescr++) {
 358                 memset_io(ptdescr, 0, sizeof(pcsca_bd_t));
 359                 cpc_writew(&ptdescr->len, 0);
 360                 cpc_writeb(&ptdescr->status, 0);
 361         }
 362         rx_dma_buf_pt_init(card, ch);
 363 }
 364
 365 static void tx_dma_buf_check(pc300_t * card, int ch)
 366 {
 367         volatile pcsca_bd_t __iomem *ptdescr;
 368         int i;
 369         u16 first_bd = card->chan[ch].tx_first_bd;
 370         u16 next_bd = card->chan[ch].tx_next_bd;
 371
 372         printk("#CH%d: f_bd = %d(0x%08zx), n_bd = %d(0x%08zx)\n", ch,
 373                first_bd, TX_BD_ADDR(ch, first_bd),
 374                next_bd, TX_BD_ADDR(ch, next_bd));
 375         for (i = first_bd,
 376              ptdescr = (card->hw.rambase + TX_BD_ADDR(ch, first_bd));
 377              i != ((next_bd + 1) & (N_DMA_TX_BUF - 1));
 378              i = (i + 1) & (N_DMA_TX_BUF - 1),
 379                  ptdescr = (card->hw.rambase + TX_BD_ADDR(ch, i))) {
 380                 printk("\n CH%d TX%d: next=0x%x, ptbuf=0x%x, ST=0x%x, len=%d",
 381                        ch, i, cpc_readl(&ptdescr->next),
 382                        cpc_readl(&ptdescr->ptbuf),
 383                        cpc_readb(&ptdescr->status), cpc_readw(&ptdescr->len));
 384         }
 385         printk("\n");
 386 }
 387
 388 #ifdef  PC300_DEBUG_OTHER
 389 /* Show all TX buffer descriptors */
 390 static void tx1_dma_buf_check(pc300_t * card, int ch)
 391 {
 392         volatile pcsca_bd_t __iomem *ptdescr;
 393         int i;
 394         u16 first_bd = card->chan[ch].tx_first_bd;
 395         u16 next_bd = card->chan[ch].tx_next_bd;
 396         u32 scabase = card->hw.scabase;
 397
 398         printk ("\nnfree_tx_bd = %d \n", card->chan[ch].nfree_tx_bd);
 399         printk("#CH%d: f_bd = %d(0x%08x), n_bd = %d(0x%08x)\n", ch,
 400                first_bd, TX_BD_ADDR(ch, first_bd),
 401                next_bd, TX_BD_ADDR(ch, next_bd));
 402         printk("TX_CDA=0x%08x, TX_EDA=0x%08x\n",
 403                cpc_readl(scabase + DTX_REG(CDAL, ch)),
 404                cpc_readl(scabase + DTX_REG(EDAL, ch)));
 405         for (i = 0; i < N_DMA_TX_BUF; i++) {
 406                 ptdescr = (card->hw.rambase + TX_BD_ADDR(ch, i));
 407                 printk("\n CH%d TX%d: next=0x%x, ptbuf=0x%x, ST=0x%x, len=%d",
 408                        ch, i, cpc_readl(&ptdescr->next),
 409                        cpc_readl(&ptdescr->ptbuf),
 410                        cpc_readb(&ptdescr->status), cpc_readw(&ptdescr->len));
 411         }
 412         printk("\n");
 413 }
 414 #endif
 415
 416 static void rx_dma_buf_check(pc300_t * card, int ch)
 417 {
 418         volatile pcsca_bd_t __iomem *ptdescr;
 419         int i;
 420         u16 first_bd = card->chan[ch].rx_first_bd;
 421         u16 last_bd = card->chan[ch].rx_last_bd;
 422         int ch_factor;
 423
 424         ch_factor = ch * N_DMA_RX_BUF;
 425         printk("#CH%d: f_bd = %d, l_bd = %d\n", ch, first_bd, last_bd);
 426         for (i = 0, ptdescr = (card->hw.rambase +
 427                                               DMA_RX_BD_BASE + ch_factor * sizeof(pcsca_bd_t));
 428              i < N_DMA_RX_BUF; i++, ptdescr++) {
 429                 if (cpc_readb(&ptdescr->status) & DST_OSB)
 430                         printk ("\n CH%d RX%d: next=0x%x, ptbuf=0x%x, ST=0x%x, len=%d",
 431                                  ch, i, cpc_readl(&ptdescr->next),
 432                                  cpc_readl(&ptdescr->ptbuf),
 433                                  cpc_readb(&ptdescr->status),
 434                                  cpc_readw(&ptdescr->len));
 435         }
 436         printk("\n");
 437 }
 438
 439 static int dma_get_rx_frame_size(pc300_t * card, int ch)
 440 {
 441         volatile pcsca_bd_t __iomem *ptdescr;
 442         u16 first_bd = card->chan[ch].rx_first_bd;
 443         int rcvd = 0;
 444         volatile u8 status;
 445
 446         ptdescr = (card->hw.rambase + RX_BD_ADDR(ch, first_bd));
 447         while ((status = cpc_readb(&ptdescr->status)) & DST_OSB) {
 448                 rcvd += cpc_readw(&ptdescr->len);
 449                 first_bd = (first_bd + 1) & (N_DMA_RX_BUF - 1);
 450                 if ((status & DST_EOM) || (first_bd == card->chan[ch].rx_last_bd)) {
 451                         /* Return the size of a good frame or incomplete bad frame
 452                         * (dma_buf_read will clean the buffer descriptors in this case). */
 453                         return (rcvd);
 454                 }
 455                 ptdescr = (card->hw.rambase + cpc_readl(&ptdescr->next));
 456         }
 457         return (-1);
 458 }
 459
 460 /*
 461  * dma_buf_write: writes a frame to the Tx DMA buffers
 462  * NOTE: this function writes one frame at a time.
 463  */
 464 static int dma_buf_write(pc300_t *card, int ch, u8 *ptdata, int len)
 465 {
 466         int i, nchar;
 467         volatile pcsca_bd_t __iomem *ptdescr;
 468         int tosend = len;
 469         u8 nbuf = ((len - 1) / BD_DEF_LEN) + 1;
 470
 471         if (nbuf >= card->chan[ch].nfree_tx_bd) {
 472                 return -ENOMEM;
 473         }
 474
 475         for (i = 0; i < nbuf; i++) {
 476                 ptdescr = (card->hw.rambase +
 477                                           TX_BD_ADDR(ch, card->chan[ch].tx_next_bd));
 478                 nchar = cpc_min(BD_DEF_LEN, tosend);
 479                 if (cpc_readb(&ptdescr->status) & DST_OSB) {
 480                         memcpy_toio((card->hw.rambase + cpc_readl(&ptdescr->ptbuf)),
 481                                     &ptdata[len - tosend], nchar);
 482                         cpc_writew(&ptdescr->len, nchar);
 483                         card->chan[ch].nfree_tx_bd--;
 484                         if ((i + 1) == nbuf) {
 485                                 /* This must be the last BD to be used */
 486                                 cpc_writeb(&ptdescr->status, DST_EOM);
 487                         } else {
 488                                 cpc_writeb(&ptdescr->status, 0);
 489                         }
 490                 } else {
 491                         return -ENOMEM;
 492                 }
 493                 tosend -= nchar;
 494                 card->chan[ch].tx_next_bd =
 495                         (card->chan[ch].tx_next_bd + 1) & (N_DMA_TX_BUF - 1);
 496         }
 497         /* If it gets to here, it means we have sent the whole frame */
 498         return 0;
 499 }
 500
 501 /*
 502  * dma_buf_read: reads a frame from the Rx DMA buffers
 503  * NOTE: this function reads one frame at a time.
 504  */
 505 static int dma_buf_read(pc300_t * card, int ch, struct sk_buff *skb)
 506 {
 507         int nchar;
 508         pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
 509         volatile pcsca_bd_t __iomem *ptdescr;
 510         int rcvd = 0;
 511         volatile u8 status;
 512
 513         ptdescr = (card->hw.rambase +
 514                                   RX_BD_ADDR(ch, chan->rx_first_bd));
 515         while ((status = cpc_readb(&ptdescr->status)) & DST_OSB) {
 516                 nchar = cpc_readw(&ptdescr->len);
 517                 if ((status & (DST_OVR | DST_CRC | DST_RBIT | DST_SHRT | DST_ABT))
 518                     || (nchar > BD_DEF_LEN)) {
 519
 520                         if (nchar > BD_DEF_LEN)
 521                                 status |= DST_RBIT;
 522                         rcvd = -status;
 523                         /* Discard remaining descriptors used by the bad frame */
 524                         while (chan->rx_first_bd != chan->rx_last_bd) {
 525                                 cpc_writeb(&ptdescr->status, 0);
 526                                 chan->rx_first_bd = (chan->rx_first_bd+1) & (N_DMA_RX_BUF-1);
 527                                 if (status & DST_EOM)
 528                                         break;
 529                                 ptdescr = (card->hw.rambase +
 530                                                           cpc_readl(&ptdescr->next));
 531                                 status = cpc_readb(&ptdescr->status);
 532                         }
 533                         break;
 534                 }
 535                 if (nchar != 0) {
 536                         if (skb) {
 537                                 memcpy_fromio(skb_put(skb, nchar),
 538                                  (card->hw.rambase+cpc_readl(&ptdescr->ptbuf)),nchar);
 539                         }
 540                         rcvd += nchar;
 541                 }
 542                 cpc_writeb(&ptdescr->status, 0);
 543                 cpc_writeb(&ptdescr->len, 0);
 544                 chan->rx_first_bd = (chan->rx_first_bd + 1) & (N_DMA_RX_BUF - 1);
 545
 546                 if (status & DST_EOM)
 547                         break;
 548
 549                 ptdescr = (card->hw.rambase + cpc_readl(&ptdescr->next));
 550         }
 551
 552         if (rcvd != 0) {
 553                 /* Update pointer */
 554                 chan->rx_last_bd = (chan->rx_first_bd - 1) & (N_DMA_RX_BUF - 1);
 555                 /* Update EDA */
 556                 cpc_writel(card->hw.scabase + DRX_REG(EDAL, ch),
 557                            RX_BD_ADDR(ch, chan->rx_last_bd));
 558         }
 559         return (rcvd);
 560 }
 561
 562 static void tx_dma_stop(pc300_t * card, int ch)
 563 {
 564         void __iomem *scabase = card->hw.scabase;
 565         u8 drr_ena_bit = 1 << (5 + 2 * ch);
 566         u8 drr_rst_bit = 1 << (1 + 2 * ch);
 567
 568         /* Disable DMA */
 569         cpc_writeb(scabase + DRR, drr_ena_bit);
 570         cpc_writeb(scabase + DRR, drr_rst_bit & ~drr_ena_bit);
 571 }
 572
 573 static void rx_dma_stop(pc300_t * card, int ch)
 574 {
 575         void __iomem *scabase = card->hw.scabase;
 576         u8 drr_ena_bit = 1 << (4 + 2 * ch);
 577         u8 drr_rst_bit = 1 << (2 * ch);
 578
 579         /* Disable DMA */
 580         cpc_writeb(scabase + DRR, drr_ena_bit);
 581         cpc_writeb(scabase + DRR, drr_rst_bit & ~drr_ena_bit);
 582 }
 583
 584 static void rx_dma_start(pc300_t * card, int ch)
 585 {
 586         void __iomem *scabase = card->hw.scabase;
 587         pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
 588
 589         /* Start DMA */
 590         cpc_writel(scabase + DRX_REG(CDAL, ch),
 591                    RX_BD_ADDR(ch, chan->rx_first_bd));
 592         if (cpc_readl(scabase + DRX_REG(CDAL,ch)) !=
 593                                   RX_BD_ADDR(ch, chan->rx_first_bd)) {
 594                 cpc_writel(scabase + DRX_REG(CDAL, ch),
 595                                    RX_BD_ADDR(ch, chan->rx_first_bd));
 596         }
 597         cpc_writel(scabase + DRX_REG(EDAL, ch),
 598                    RX_BD_ADDR(ch, chan->rx_last_bd));
 599         cpc_writew(scabase + DRX_REG(BFLL, ch), BD_DEF_LEN);
 600         cpc_writeb(scabase + DSR_RX(ch), DSR_DE);
 601         if (!(cpc_readb(scabase + DSR_RX(ch)) & DSR_DE)) {
 602         cpc_writeb(scabase + DSR_RX(ch), DSR_DE);
 603         }
 604 }
 605
 606 /*************************/
 607 /***   FALC Routines   ***/
 608 /*************************/
 609 static void falc_issue_cmd(pc300_t *card, int ch, u8 cmd)
 610 {
 611         void __iomem *falcbase = card->hw.falcbase;
 612         unsigned long i = 0;
 613
 614         while (cpc_readb(falcbase + F_REG(SIS, ch)) & SIS_CEC) {
 615                 if (i++ >= PC300_FALC_MAXLOOP) {
 616                         printk("%s: FALC command locked(cmd=0x%x).\n",
 617                                card->chan[ch].d.name, cmd);
 618                         break;
 619                 }
 620         }
 621         cpc_writeb(falcbase + F_REG(CMDR, ch), cmd);
 622 }
 623
 624 static void falc_intr_enable(pc300_t * card, int ch)
 625 {
 626         pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
 627         pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
 628         falc_t *pfalc = (falc_t *) & chan->falc;
 629         void __iomem *falcbase = card->hw.falcbase;
 630
 631         /* Interrupt pins are open-drain */
 632         cpc_writeb(falcbase + F_REG(IPC, ch),
 633                    cpc_readb(falcbase + F_REG(IPC, ch)) & ~IPC_IC0);
 634         /* Conters updated each second */
 635         cpc_writeb(falcbase + F_REG(FMR1, ch),
 636                    cpc_readb(falcbase + F_REG(FMR1, ch)) | FMR1_ECM);
 637         /* Enable SEC and ES interrupts  */
 638         cpc_writeb(falcbase + F_REG(IMR3, ch),
 639                    cpc_readb(falcbase + F_REG(IMR3, ch)) & ~(IMR3_SEC | IMR3_ES));
 640         if (conf->fr_mode == PC300_FR_UNFRAMED) {
 641                 cpc_writeb(falcbase + F_REG(IMR4, ch),
 642                            cpc_readb(falcbase + F_REG(IMR4, ch)) & ~(IMR4_LOS));
 643         } else {
 644                 cpc_writeb(falcbase + F_REG(IMR4, ch),
 645                            cpc_readb(falcbase + F_REG(IMR4, ch)) &
 646                            ~(IMR4_LFA | IMR4_AIS | IMR4_LOS | IMR4_SLIP));
 647         }
 648         if (conf->media == IF_IFACE_T1) {
 649                 cpc_writeb(falcbase + F_REG(IMR3, ch),
 650                            cpc_readb(falcbase + F_REG(IMR3, ch)) & ~IMR3_LLBSC);
 651         } else {
 652                 cpc_writeb(falcbase + F_REG(IPC, ch),
 653                            cpc_readb(falcbase + F_REG(IPC, ch)) | IPC_SCI);
 654                 if (conf->fr_mode == PC300_FR_UNFRAMED) {
 655                         cpc_writeb(falcbase + F_REG(IMR2, ch),
 656                                    cpc_readb(falcbase + F_REG(IMR2, ch)) & ~(IMR2_LOS));
 657                 } else {
 658                         cpc_writeb(falcbase + F_REG(IMR2, ch),
 659                                    cpc_readb(falcbase + F_REG(IMR2, ch)) &
 660                                    ~(IMR2_FAR | IMR2_LFA | IMR2_AIS | IMR2_LOS));
 661                         if (pfalc->multiframe_mode) {
 662                                 cpc_writeb(falcbase + F_REG(IMR2, ch),
 663                                            cpc_readb(falcbase + F_REG(IMR2, ch)) &
 664                                            ~(IMR2_T400MS | IMR2_MFAR));
 665                         } else {
 666                                 cpc_writeb(falcbase + F_REG(IMR2, ch),
 667                                            cpc_readb(falcbase + F_REG(IMR2, ch)) |
 668                                            IMR2_T400MS | IMR2_MFAR);
 669                         }
 670                 }
 671         }
 672 }
 673
 674 static void falc_open_timeslot(pc300_t * card, int ch, int timeslot)
 675 {
 676         void __iomem *falcbase = card->hw.falcbase;
 677         u8 tshf = card->chan[ch].falc.offset;
 678
 679         cpc_writeb(falcbase + F_REG((ICB1 + (timeslot - tshf) / 8), ch),
 680                    cpc_readb(falcbase + F_REG((ICB1 + (timeslot - tshf) / 8), ch)) &
 681                         ~(0x80 >> ((timeslot - tshf) & 0x07)));
 682         cpc_writeb(falcbase + F_REG((TTR1 + timeslot / 8), ch),
 683                    cpc_readb(falcbase + F_REG((TTR1 + timeslot / 8), ch)) |
 684                         (0x80 >> (timeslot & 0x07)));
 685         cpc_writeb(falcbase + F_REG((RTR1 + timeslot / 8), ch),
 686                    cpc_readb(falcbase + F_REG((RTR1 + timeslot / 8), ch)) |
 687                         (0x80 >> (timeslot & 0x07)));
 688 }
 689
 690 static void falc_close_timeslot(pc300_t * card, int ch, int timeslot)
 691 {
 692         void __iomem *falcbase = card->hw.falcbase;
 693         u8 tshf = card->chan[ch].falc.offset;
 694
 695         cpc_writeb(falcbase + F_REG((ICB1 + (timeslot - tshf) / 8), ch),
 696                    cpc_readb(falcbase + F_REG((ICB1 + (timeslot - tshf) / 8), ch)) |
 697                    (0x80 >> ((timeslot - tshf) & 0x07)));
 698         cpc_writeb(falcbase + F_REG((TTR1 + timeslot / 8), ch),
 699                    cpc_readb(falcbase + F_REG((TTR1 + timeslot / 8), ch)) &
 700                    ~(0x80 >> (timeslot & 0x07)));
 701         cpc_writeb(falcbase + F_REG((RTR1 + timeslot / 8), ch),
 702                    cpc_readb(falcbase + F_REG((RTR1 + timeslot / 8), ch)) &
 703                    ~(0x80 >> (timeslot & 0x07)));
 704 }
 705
 706 static void falc_close_all_timeslots(pc300_t * card, int ch)
 707 {
 708         pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
 709         pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
 710         void __iomem *falcbase = card->hw.falcbase;
 711
 712         cpc_writeb(falcbase + F_REG(ICB1, ch), 0xff);
 713         cpc_writeb(falcbase + F_REG(TTR1, ch), 0);
 714         cpc_writeb(falcbase + F_REG(RTR1, ch), 0);
 715         cpc_writeb(falcbase + F_REG(ICB2, ch), 0xff);
 716         cpc_writeb(falcbase + F_REG(TTR2, ch), 0);
 717         cpc_writeb(falcbase + F_REG(RTR2, ch), 0);
 718         cpc_writeb(falcbase + F_REG(ICB3, ch), 0xff);
 719         cpc_writeb(falcbase + F_REG(TTR3, ch), 0);
 720         cpc_writeb(falcbase + F_REG(RTR3, ch), 0);
 721         if (conf->media == IF_IFACE_E1) {
 722                 cpc_writeb(falcbase + F_REG(ICB4, ch), 0xff);
 723                 cpc_writeb(falcbase + F_REG(TTR4, ch), 0);
 724                 cpc_writeb(falcbase + F_REG(RTR4, ch), 0);
 725         }
 726 }
 727
 728 static void falc_open_all_timeslots(pc300_t * card, int ch)
 729 {
 730         pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
 731         pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
 732         void __iomem *falcbase = card->hw.falcbase;
 733
 734         cpc_writeb(falcbase + F_REG(ICB1, ch), 0);
 735         if (conf->fr_mode == PC300_FR_UNFRAMED) {
 736                 cpc_writeb(falcbase + F_REG(TTR1, ch), 0xff);
 737                 cpc_writeb(falcbase + F_REG(RTR1, ch), 0xff);
 738         } else {
 739                 /* Timeslot 0 is never enabled */
 740                 cpc_writeb(falcbase + F_REG(TTR1, ch), 0x7f);
 741                 cpc_writeb(falcbase + F_REG(RTR1, ch), 0x7f);
 742         }
 743         cpc_writeb(falcbase + F_REG(ICB2, ch), 0);
 744         cpc_writeb(falcbase + F_REG(TTR2, ch), 0xff);
 745         cpc_writeb(falcbase + F_REG(RTR2, ch), 0xff);
 746         cpc_writeb(falcbase + F_REG(ICB3, ch), 0);
 747         cpc_writeb(falcbase + F_REG(TTR3, ch), 0xff);
 748         cpc_writeb(falcbase + F_REG(RTR3, ch), 0xff);
 749         if (conf->media == IF_IFACE_E1) {
 750                 cpc_writeb(falcbase + F_REG(ICB4, ch), 0);
 751                 cpc_writeb(falcbase + F_REG(TTR4, ch), 0xff);
 752                 cpc_writeb(falcbase + F_REG(RTR4, ch), 0xff);
 753         } else {
 754                 cpc_writeb(falcbase + F_REG(ICB4, ch), 0xff);
 755                 cpc_writeb(falcbase + F_REG(TTR4, ch), 0x80);
 756                 cpc_writeb(falcbase + F_REG(RTR4, ch), 0x80);
 757         }
 758 }
 759
 760 static void falc_init_timeslot(pc300_t * card, int ch)
 761 {
 762         pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
 763         pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
 764         falc_t *pfalc = (falc_t *) & chan->falc;
 765         int tslot;
 766
 767         for (tslot = 0; tslot < pfalc->num_channels; tslot++) {
 768                 if (conf->tslot_bitmap & (1 << tslot)) {
 769                         // Channel enabled
 770                         falc_open_timeslot(card, ch, tslot + 1);
 771                 } else {
 772                         // Channel disabled
 773                         falc_close_timeslot(card, ch, tslot + 1);
 774                 }
 775         }
 776 }
 777
 778 static void falc_enable_comm(pc300_t * card, int ch)
 779 {
 780         pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
 781         falc_t *pfalc = (falc_t *) & chan->falc;
 782
 783         if (pfalc->full_bandwidth) {
 784                 falc_open_all_timeslots(card, ch);
 785         } else {
 786                 falc_init_timeslot(card, ch);
 787         }
 788         // CTS/DCD ON
 789         cpc_writeb(card->hw.falcbase + card->hw.cpld_reg1,
 790                    cpc_readb(card->hw.falcbase + card->hw.cpld_reg1) &
 791                    ~((CPLD_REG1_FALC_DCD | CPLD_REG1_FALC_CTS) << (2 * ch)));
 792 }
 793
 794 static void falc_disable_comm(pc300_t * card, int ch)
 795 {
 796         pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
 797         falc_t *pfalc = (falc_t *) & chan->falc;
 798
 799         if (pfalc->loop_active != 2) {
 800                 falc_close_all_timeslots(card, ch);
 801         }
 802         // CTS/DCD OFF
 803         cpc_writeb(card->hw.falcbase + card->hw.cpld_reg1,
 804                    cpc_readb(card->hw.falcbase + card->hw.cpld_reg1) |
 805                    ((CPLD_REG1_FALC_DCD | CPLD_REG1_FALC_CTS) << (2 * ch)));
 806 }
 807
 808 static void falc_init_t1(pc300_t * card, int ch)
 809 {
 810         pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
 811         pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
 812         falc_t *pfalc = (falc_t *) & chan->falc;
 813         void __iomem *falcbase = card->hw.falcbase;
 814         u8 dja = (ch ? (LIM2_DJA2 | LIM2_DJA1) : 0);
 815
 816         /* Switch to T1 mode (PCM 24) */
 817         cpc_writeb(falcbase + F_REG(FMR1, ch), FMR1_PMOD);
 818
 819         /* Wait 20 us for setup */
 820         udelay(20);
 821
 822         /* Transmit Buffer Size (1 frame) */
 823         cpc_writeb(falcbase + F_REG(SIC1, ch), SIC1_XBS0);
 824
 825         /* Clock mode */
 826         if (conf->phys_settings.clock_type == CLOCK_INT) { /* Master mode */
 827                 cpc_writeb(falcbase + F_REG(LIM0, ch),
 828                            cpc_readb(falcbase + F_REG(LIM0, ch)) | LIM0_MAS);
 829         } else { /* Slave mode */
 830                 cpc_writeb(falcbase + F_REG(LIM0, ch),
 831                            cpc_readb(falcbase + F_REG(LIM0, ch)) & ~LIM0_MAS);
 832                 cpc_writeb(falcbase + F_REG(LOOP, ch),
 833                            cpc_readb(falcbase + F_REG(LOOP, ch)) & ~LOOP_RTM);
 834         }
 835
 836         cpc_writeb(falcbase + F_REG(IPC, ch), IPC_SCI);
 837         cpc_writeb(falcbase + F_REG(FMR0, ch),
 838                    cpc_readb(falcbase + F_REG(FMR0, ch)) &
 839                    ~(FMR0_XC0 | FMR0_XC1 | FMR0_RC0 | FMR0_RC1));
 840
 841         switch (conf->lcode) {
 842                 case PC300_LC_AMI:
 843                         cpc_writeb(falcbase + F_REG(FMR0, ch),
 844                                    cpc_readb(falcbase + F_REG(FMR0, ch)) |
 845                                    FMR0_XC1 | FMR0_RC1);
 846                         /* Clear Channel register to ON for all channels */
 847                         cpc_writeb(falcbase + F_REG(CCB1, ch), 0xff);
 848                         cpc_writeb(falcbase + F_REG(CCB2, ch), 0xff);
 849                         cpc_writeb(falcbase + F_REG(CCB3, ch), 0xff);
 850                         break;
 851
 852                 case PC300_LC_B8ZS:
 853                         cpc_writeb(falcbase + F_REG(FMR0, ch),
 854                                    cpc_readb(falcbase + F_REG(FMR0, ch)) |
 855                                    FMR0_XC0 | FMR0_XC1 | FMR0_RC0 | FMR0_RC1);
 856                         break;
 857
 858                 case PC300_LC_NRZ:
 859                         cpc_writeb(falcbase + F_REG(FMR0, ch),
 860                                    cpc_readb(falcbase + F_REG(FMR0, ch)) | 0x00);
 861                         break;
 862         }
 863
 864         cpc_writeb(falcbase + F_REG(LIM0, ch),
 865                    cpc_readb(falcbase + F_REG(LIM0, ch)) | LIM0_ELOS);
 866         cpc_writeb(falcbase + F_REG(LIM0, ch),
 867                    cpc_readb(falcbase + F_REG(LIM0, ch)) & ~(LIM0_SCL1 | LIM0_SCL0));
 868         /* Set interface mode to 2 MBPS */
 869         cpc_writeb(falcbase + F_REG(FMR1, ch),
 870                    cpc_readb(falcbase + F_REG(FMR1, ch)) | FMR1_IMOD);
 871
 872         switch (conf->fr_mode) {
 873                 case PC300_FR_ESF:
 874                         pfalc->multiframe_mode = 0;
 875                         cpc_writeb(falcbase + F_REG(FMR4, ch),
 876                                    cpc_readb(falcbase + F_REG(FMR4, ch)) | FMR4_FM1);
 877                         cpc_writeb(falcbase + F_REG(FMR1, ch),
 878                                    cpc_readb(falcbase + F_REG(FMR1, ch)) |
 879                                    FMR1_CRC | FMR1_EDL);
 880                         cpc_writeb(falcbase + F_REG(XDL1, ch), 0);
 881                         cpc_writeb(falcbase + F_REG(XDL2, ch), 0);
 882                         cpc_writeb(falcbase + F_REG(XDL3, ch), 0);
 883                         cpc_writeb(falcbase + F_REG(FMR0, ch),
 884                                    cpc_readb(falcbase + F_REG(FMR0, ch)) & ~FMR0_SRAF);
 885                         cpc_writeb(falcbase + F_REG(FMR2, ch),
 886                                    cpc_readb(falcbase + F_REG(FMR2,ch)) | FMR2_MCSP | FMR2_SSP);
 887                         break;
 888
 889                 case PC300_FR_D4:
 890                         pfalc->multiframe_mode = 1;
 891                         cpc_writeb(falcbase + F_REG(FMR4, ch),
 892                                    cpc_readb(falcbase + F_REG(FMR4, ch)) &
 893                                    ~(FMR4_FM1 | FMR4_FM0));
 894                         cpc_writeb(falcbase + F_REG(FMR0, ch),
 895                                    cpc_readb(falcbase + F_REG(FMR0, ch)) | FMR0_SRAF);
 896                         cpc_writeb(falcbase + F_REG(FMR2, ch),
 897                                    cpc_readb(falcbase + F_REG(FMR2, ch)) & ~FMR2_SSP);
 898                         break;
 899         }
 900
 901         /* Enable Automatic Resynchronization */
 902         cpc_writeb(falcbase + F_REG(FMR4, ch),
 903                    cpc_readb(falcbase + F_REG(FMR4, ch)) | FMR4_AUTO);
 904
 905         /* Transmit Automatic Remote Alarm */
 906         cpc_writeb(falcbase + F_REG(FMR2, ch),
 907                    cpc_readb(falcbase + F_REG(FMR2, ch)) | FMR2_AXRA);
 908
 909         /* Channel translation mode 1 : one to one */
 910         cpc_writeb(falcbase + F_REG(FMR1, ch),
 911                    cpc_readb(falcbase + F_REG(FMR1, ch)) | FMR1_CTM);
 912
 913         /* No signaling */
 914         cpc_writeb(falcbase + F_REG(FMR1, ch),
 915                    cpc_readb(falcbase + F_REG(FMR1, ch)) & ~FMR1_SIGM);
 916         cpc_writeb(falcbase + F_REG(FMR5, ch),
 917                    cpc_readb(falcbase + F_REG(FMR5, ch)) &
 918                    ~(FMR5_EIBR | FMR5_SRS));
 919         cpc_writeb(falcbase + F_REG(CCR1, ch), 0);
 920
 921         cpc_writeb(falcbase + F_REG(LIM1, ch),
 922                    cpc_readb(falcbase + F_REG(LIM1, ch)) | LIM1_RIL0 | LIM1_RIL1);
 923
 924         switch (conf->lbo) {
 925                         /* Provides proper Line Build Out */
 926                 case PC300_LBO_0_DB:
 927                         cpc_writeb(falcbase + F_REG(LIM2, ch), (LIM2_LOS1 | dja));
 928                         cpc_writeb(falcbase + F_REG(XPM0, ch), 0x5a);
 929                         cpc_writeb(falcbase + F_REG(XPM1, ch), 0x8f);
 930                         cpc_writeb(falcbase + F_REG(XPM2, ch), 0x20);
 931                         break;
 932                 case PC300_LBO_7_5_DB:
 933                         cpc_writeb(falcbase + F_REG(LIM2, ch), (0x40 | LIM2_LOS1 | dja));
 934                         cpc_writeb(falcbase + F_REG(XPM0, ch), 0x11);
 935                         cpc_writeb(falcbase + F_REG(XPM1, ch), 0x02);
 936                         cpc_writeb(falcbase + F_REG(XPM2, ch), 0x20);
 937                         break;
 938                 case PC300_LBO_15_DB:
 939                         cpc_writeb(falcbase + F_REG(LIM2, ch), (0x80 | LIM2_LOS1 | dja));
 940                         cpc_writeb(falcbase + F_REG(XPM0, ch), 0x8e);
 941                         cpc_writeb(falcbase + F_REG(XPM1, ch), 0x01);
 942                         cpc_writeb(falcbase + F_REG(XPM2, ch), 0x20);
 943                         break;
 944                 case PC300_LBO_22_5_DB:
 945                         cpc_writeb(falcbase + F_REG(LIM2, ch), (0xc0 | LIM2_LOS1 | dja));
 946                         cpc_writeb(falcbase + F_REG(XPM0, ch), 0x09);
 947                         cpc_writeb(falcbase + F_REG(XPM1, ch), 0x01);
 948                         cpc_writeb(falcbase + F_REG(XPM2, ch), 0x20);
 949                         break;
 950         }
 951
 952         /* Transmit Clock-Slot Offset */
 953         cpc_writeb(falcbase + F_REG(XC0, ch),
 954                    cpc_readb(falcbase + F_REG(XC0, ch)) | 0x01);
 955         /* Transmit Time-slot Offset */
 956         cpc_writeb(falcbase + F_REG(XC1, ch), 0x3e);
 957         /* Receive  Clock-Slot offset */
 958         cpc_writeb(falcbase + F_REG(RC0, ch), 0x05);
 959         /* Receive  Time-slot offset */
 960         cpc_writeb(falcbase + F_REG(RC1, ch), 0x00);
 961
 962         /* LOS Detection after 176 consecutive 0s */
 963         cpc_writeb(falcbase + F_REG(PCDR, ch), 0x0a);
 964         /* LOS Recovery after 22 ones in the time window of PCD */
 965         cpc_writeb(falcbase + F_REG(PCRR, ch), 0x15);
 966
 967         cpc_writeb(falcbase + F_REG(IDLE, ch), 0x7f);
 968
 969         if (conf->fr_mode == PC300_FR_ESF_JAPAN) {
 970                 cpc_writeb(falcbase + F_REG(RC1, ch),
 971                            cpc_readb(falcbase + F_REG(RC1, ch)) | 0x80);
 972         }
 973
 974         falc_close_all_timeslots(card, ch);
 975 }
 976
 977 static void falc_init_e1(pc300_t * card, int ch)
 978 {
 979         pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
 980         pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
 981         falc_t *pfalc = (falc_t *) & chan->falc;
 982         void __iomem *falcbase = card->hw.falcbase;
 983         u8 dja = (ch ? (LIM2_DJA2 | LIM2_DJA1) : 0);
 984
 985         /* Switch to E1 mode (PCM 30) */
 986         cpc_writeb(falcbase + F_REG(FMR1, ch),
 987                    cpc_readb(falcbase + F_REG(FMR1, ch)) & ~FMR1_PMOD);
 988
 989         /* Clock mode */
 990         if (conf->phys_settings.clock_type == CLOCK_INT) { /* Master mode */
 991                 cpc_writeb(falcbase + F_REG(LIM0, ch),
 992                            cpc_readb(falcbase + F_REG(LIM0, ch)) | LIM0_MAS);
 993         } else { /* Slave mode */
 994                 cpc_writeb(falcbase + F_REG(LIM0, ch),
 995                            cpc_readb(falcbase + F_REG(LIM0, ch)) & ~LIM0_MAS);
 996         }
 997         cpc_writeb(falcbase + F_REG(LOOP, ch),
 998                    cpc_readb(falcbase + F_REG(LOOP, ch)) & ~LOOP_SFM);
 999
1000         cpc_writeb(falcbase + F_REG(IPC, ch), IPC_SCI);
1001         cpc_writeb(falcbase + F_REG(FMR0, ch),
1002                    cpc_readb(falcbase + F_REG(FMR0, ch)) &
1003                    ~(FMR0_XC0 | FMR0_XC1 | FMR0_RC0 | FMR0_RC1));
1004
1005         switch (conf->lcode) {
1006                 case PC300_LC_AMI:
1007                         cpc_writeb(falcbase + F_REG(FMR0, ch),
1008                                    cpc_readb(falcbase + F_REG(FMR0, ch)) |
1009                                    FMR0_XC1 | FMR0_RC1);
1010                         break;
1011
1012                 case PC300_LC_HDB3:
1013                         cpc_writeb(falcbase + F_REG(FMR0, ch),
1014                                    cpc_readb(falcbase + F_REG(FMR0, ch)) |
1015                                    FMR0_XC0 | FMR0_XC1 | FMR0_RC0 | FMR0_RC1);
1016                         break;
1017
1018                 case PC300_LC_NRZ:
1019                         break;
1020         }
1021
1022         cpc_writeb(falcbase + F_REG(LIM0, ch),
1023                    cpc_readb(falcbase + F_REG(LIM0, ch)) & ~(LIM0_SCL1 | LIM0_SCL0));
1024         /* Set interface mode to 2 MBPS */
1025         cpc_writeb(falcbase + F_REG(FMR1, ch),
1026                    cpc_readb(falcbase + F_REG(FMR1, ch)) | FMR1_IMOD);
1027
1028         cpc_writeb(falcbase + F_REG(XPM0, ch), 0x18);
1029         cpc_writeb(falcbase + F_REG(XPM1, ch), 0x03);
1030         cpc_writeb(falcbase + F_REG(XPM2, ch), 0x00);
1031
1032         switch (conf->fr_mode) {
1033                 case PC300_FR_MF_CRC4:
1034                         pfalc->multiframe_mode = 1;
1035                         cpc_writeb(falcbase + F_REG(FMR1, ch),
1036                                    cpc_readb(falcbase + F_REG(FMR1, ch)) | FMR1_XFS);
1037                         cpc_writeb(falcbase + F_REG(FMR2, ch),
1038                                    cpc_readb(falcbase + F_REG(FMR2, ch)) | FMR2_RFS1);
1039                         cpc_writeb(falcbase + F_REG(FMR2, ch),
1040                                    cpc_readb(falcbase + F_REG(FMR2, ch)) & ~FMR2_RFS0);
1041                         cpc_writeb(falcbase + F_REG(FMR3, ch),
1042                                    cpc_readb(falcbase + F_REG(FMR3, ch)) & ~FMR3_EXTIW);
1043
1044                         /* MultiFrame Resynchronization */
1045                         cpc_writeb(falcbase + F_REG(FMR1, ch),
1046                                    cpc_readb(falcbase + F_REG(FMR1, ch)) | FMR1_MFCS);
1047
1048                         /* Automatic Loss of Multiframe > 914 CRC errors */
1049                         cpc_writeb(falcbase + F_REG(FMR2, ch),
1050                                    cpc_readb(falcbase + F_REG(FMR2, ch)) | FMR2_ALMF);
1051
1052                         /* S1 and SI1/SI2 spare Bits set to 1 */
1053                         cpc_writeb(falcbase + F_REG(XSP, ch),
1054                                    cpc_readb(falcbase + F_REG(XSP, ch)) & ~XSP_AXS);
1055                         cpc_writeb(falcbase + F_REG(XSP, ch),
1056                                    cpc_readb(falcbase + F_REG(XSP, ch)) | XSP_EBP);
1057                         cpc_writeb(falcbase + F_REG(XSP, ch),
1058                                    cpc_readb(falcbase + F_REG(XSP, ch)) | XSP_XS13 | XSP_XS15);
1059
1060                         /* Automatic Force Resynchronization */
1061                         cpc_writeb(falcbase + F_REG(FMR1, ch),
1062                                    cpc_readb(falcbase + F_REG(FMR1, ch)) | FMR1_AFR);
1063
1064                         /* Transmit Automatic Remote Alarm */
1065                         cpc_writeb(falcbase + F_REG(FMR2, ch),
1066                                    cpc_readb(falcbase + F_REG(FMR2, ch)) | FMR2_AXRA);
1067
1068                         /* Transmit Spare Bits for National Use (Y, Sn, Sa) */
1069                         cpc_writeb(falcbase + F_REG(XSW, ch),
1070                                    cpc_readb(falcbase + F_REG(XSW, ch)) |
1071                                    XSW_XY0 | XSW_XY1 | XSW_XY2 | XSW_XY3 | XSW_XY4);
1072                         break;
1073
1074                 case PC300_FR_MF_NON_CRC4:
1075                 case PC300_FR_D4:
1076                         pfalc->multiframe_mode = 0;
1077                         cpc_writeb(falcbase + F_REG(FMR1, ch),
1078                                    cpc_readb(falcbase + F_REG(FMR1, ch)) & ~FMR1_XFS);
1079                         cpc_writeb(falcbase + F_REG(FMR2, ch),
1080                                    cpc_readb(falcbase + F_REG(FMR2, ch)) &
1081                                    ~(FMR2_RFS1 | FMR2_RFS0));
1082                         cpc_writeb(falcbase + F_REG(XSW, ch),
1083                                    cpc_readb(falcbase + F_REG(XSW, ch)) | XSW_XSIS);
1084                         cpc_writeb(falcbase + F_REG(XSP, ch),
1085                                    cpc_readb(falcbase + F_REG(XSP, ch)) | XSP_XSIF);
1086
1087                         /* Automatic Force Resynchronization */
1088                         cpc_writeb(falcbase + F_REG(FMR1, ch),
1089                                    cpc_readb(falcbase + F_REG(FMR1, ch)) | FMR1_AFR);
1090
1091                         /* Transmit Automatic Remote Alarm */
1092                         cpc_writeb(falcbase + F_REG(FMR2, ch),
1093                                    cpc_readb(falcbase + F_REG(FMR2, ch)) | FMR2_AXRA);
1094
1095                         /* Transmit Spare Bits for National Use (Y, Sn, Sa) */
1096                         cpc_writeb(falcbase + F_REG(XSW, ch),
1097                                    cpc_readb(falcbase + F_REG(XSW, ch)) |
1098                                    XSW_XY0 | XSW_XY1 | XSW_XY2 | XSW_XY3 | XSW_XY4);
1099                         break;
1100
1101                 case PC300_FR_UNFRAMED:
1102                         pfalc->multiframe_mode = 0;
1103                         cpc_writeb(falcbase + F_REG(FMR1, ch),
1104                                    cpc_readb(falcbase + F_REG(FMR1, ch)) & ~FMR1_XFS);
1105                         cpc_writeb(falcbase + F_REG(FMR2, ch),
1106                                    cpc_readb(falcbase + F_REG(FMR2, ch)) &
1107                                    ~(FMR2_RFS1 | FMR2_RFS0));
1108                         cpc_writeb(falcbase + F_REG(XSP, ch),
1109                                    cpc_readb(falcbase + F_REG(XSP, ch)) | XSP_TT0);
1110                         cpc_writeb(falcbase + F_REG(XSW, ch),
1111                                    cpc_readb(falcbase + F_REG(XSW, ch)) &
1112                                    ~(XSW_XTM|XSW_XY0|XSW_XY1|XSW_XY2|XSW_XY3|XSW_XY4));
1113                         cpc_writeb(falcbase + F_REG(TSWM, ch), 0xff);
1114                         cpc_writeb(falcbase + F_REG(FMR2, ch),
1115                                    cpc_readb(falcbase + F_REG(FMR2, ch)) |
1116                                    (FMR2_RTM | FMR2_DAIS));
1117                         cpc_writeb(falcbase + F_REG(FMR2, ch),
1118                                    cpc_readb(falcbase + F_REG(FMR2, ch)) & ~FMR2_AXRA);
1119                         cpc_writeb(falcbase + F_REG(FMR1, ch),
1120                                    cpc_readb(falcbase + F_REG(FMR1, ch)) & ~FMR1_AFR);
1121                         pfalc->sync = 1;
1122                         cpc_writeb(falcbase + card->hw.cpld_reg2,
1123                                    cpc_readb(falcbase + card->hw.cpld_reg2) |
1124                                    (CPLD_REG2_FALC_LED2 << (2 * ch)));
1125                         break;
1126         }
1127
1128         /* No signaling */
1129         cpc_writeb(falcbase + F_REG(XSP, ch),
1130                    cpc_readb(falcbase + F_REG(XSP, ch)) & ~XSP_CASEN);
1131         cpc_writeb(falcbase + F_REG(CCR1, ch), 0);
1132
1133         cpc_writeb(falcbase + F_REG(LIM1, ch),
1134                    cpc_readb(falcbase + F_REG(LIM1, ch)) | LIM1_RIL0 | LIM1_RIL1);
1135         cpc_writeb(falcbase + F_REG(LIM2, ch), (LIM2_LOS1 | dja));
1136
1137         /* Transmit Clock-Slot Offset */
1138         cpc_writeb(falcbase + F_REG(XC0, ch),
1139                    cpc_readb(falcbase + F_REG(XC0, ch)) | 0x01);
1140         /* Transmit Time-slot Offset */
1141         cpc_writeb(falcbase + F_REG(XC1, ch), 0x3e);
1142         /* Receive  Clock-Slot offset */
1143         cpc_writeb(falcbase + F_REG(RC0, ch), 0x05);
1144         /* Receive  Time-slot offset */
1145         cpc_writeb(falcbase + F_REG(RC1, ch), 0x00);
1146
1147         /* LOS Detection after 176 consecutive 0s */
1148         cpc_writeb(falcbase + F_REG(PCDR, ch), 0x0a);
1149         /* LOS Recovery after 22 ones in the time window of PCD */
1150         cpc_writeb(falcbase + F_REG(PCRR, ch), 0x15);
1151
1152         cpc_writeb(falcbase + F_REG(IDLE, ch), 0x7f);
1153
1154         falc_close_all_timeslots(card, ch);
1155 }
1156
1157 static void falc_init_hdlc(pc300_t * card, int ch)
1158 {
1159         void __iomem *falcbase = card->hw.falcbase;
1160         pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
1161         pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
1162
1163         /* Enable transparent data transfer */
1164         if (conf->fr_mode == PC300_FR_UNFRAMED) {
1165                 cpc_writeb(falcbase + F_REG(MODE, ch), 0);
1166         } else {
1167                 cpc_writeb(falcbase + F_REG(MODE, ch),
1168                            cpc_readb(falcbase + F_REG(MODE, ch)) |
1169                            (MODE_HRAC | MODE_MDS2));
1170                 cpc_writeb(falcbase + F_REG(RAH2, ch), 0xff);
1171                 cpc_writeb(falcbase + F_REG(RAH1, ch), 0xff);
1172                 cpc_writeb(falcbase + F_REG(RAL2, ch), 0xff);
1173                 cpc_writeb(falcbase + F_REG(RAL1, ch), 0xff);
1174         }
1175
1176         /* Tx/Rx reset  */
1177         falc_issue_cmd(card, ch, CMDR_RRES | CMDR_XRES | CMDR_SRES);
1178
1179         /* Enable interrupt sources */
1180         falc_intr_enable(card, ch);
1181 }
1182
1183 static void te_config(pc300_t * card, int ch)
1184 {
1185         pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
1186         pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
1187         falc_t *pfalc = (falc_t *) & chan->falc;
1188         void __iomem *falcbase = card->hw.falcbase;
1189         u8 dummy;
1190         unsigned long flags;
1191
1192         memset(pfalc, 0, sizeof(falc_t));
1193         switch (conf->media) {
1194                 case IF_IFACE_T1:
1195                         pfalc->num_channels = NUM_OF_T1_CHANNELS;
1196                         pfalc->offset = 1;
1197                         break;
1198                 case IF_IFACE_E1:
1199                         pfalc->num_channels = NUM_OF_E1_CHANNELS;
1200                         pfalc->offset = 0;
1201                         break;
1202         }
1203         if (conf->tslot_bitmap == 0xffffffffUL)
1204                 pfalc->full_bandwidth = 1;
1205         else
1206                 pfalc->full_bandwidth = 0;
1207
1208         CPC_LOCK(card, flags);
1209         /* Reset the FALC chip */
1210         cpc_writeb(card->hw.falcbase + card->hw.cpld_reg1,
1211                    cpc_readb(card->hw.falcbase + card->hw.cpld_reg1) |
1212                    (CPLD_REG1_FALC_RESET << (2 * ch)));
1213         udelay(10000);
1214         cpc_writeb(card->hw.falcbase + card->hw.cpld_reg1,
1215                    cpc_readb(card->hw.falcbase + card->hw.cpld_reg1) &
1216                    ~(CPLD_REG1_FALC_RESET << (2 * ch)));
1217
1218         if (conf->media == IF_IFACE_T1) {
1219                 falc_init_t1(card, ch);
1220         } else {
1221                 falc_init_e1(card, ch);
1222         }
1223         falc_init_hdlc(card, ch);
1224         if (conf->rx_sens == PC300_RX_SENS_SH) {
1225                 cpc_writeb(falcbase + F_REG(LIM0, ch),
1226                            cpc_readb(falcbase + F_REG(LIM0, ch)) & ~LIM0_EQON);
1227         } else {
1228                 cpc_writeb(falcbase + F_REG(LIM0, ch),
1229                            cpc_readb(falcbase + F_REG(LIM0, ch)) | LIM0_EQON);
1230         }
1231         cpc_writeb(card->hw.falcbase + card->hw.cpld_reg2,
1232                    cpc_readb(card->hw.falcbase + card->hw.cpld_reg2) |
1233                    ((CPLD_REG2_FALC_TX_CLK | CPLD_REG2_FALC_RX_CLK) << (2 * ch)));
1234
1235         /* Clear all interrupt registers */
1236         dummy = cpc_readb(falcbase + F_REG(FISR0, ch)) +
1237                 cpc_readb(falcbase + F_REG(FISR1, ch)) +
1238                 cpc_readb(falcbase + F_REG(FISR2, ch)) +
1239                 cpc_readb(falcbase + F_REG(FISR3, ch));
1240         CPC_UNLOCK(card, flags);
1241 }
1242
1243 static void falc_check_status(pc300_t * card, int ch, unsigned char frs0)
1244 {
1245         pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
1246         pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
1247         falc_t *pfalc = (falc_t *) & chan->falc;
1248         void __iomem *falcbase = card->hw.falcbase;
1249
1250         /* Verify LOS */
1251         if (frs0 & FRS0_LOS) {
1252                 if (!pfalc->red_alarm) {
1253                         pfalc->red_alarm = 1;
1254                         pfalc->los++;
1255                         if (!pfalc->blue_alarm) {
1256                                 // EVENT_FALC_ABNORMAL
1257                                 if (conf->media == IF_IFACE_T1) {
1258                                         /* Disable this interrupt as it may otherwise interfere
1259                                          * with other working boards. */
1260                                         cpc_writeb(falcbase + F_REG(IMR0, ch),
1261                                                    cpc_readb(falcbase + F_REG(IMR0, ch))
1262                                                    | IMR0_PDEN);
1263                                 }
1264                                 falc_disable_comm(card, ch);
1265                                 // EVENT_FALC_ABNORMAL
1266                         }
1267                 }
1268         } else {
1269                 if (pfalc->red_alarm) {
1270                         pfalc->red_alarm = 0;
1271                         pfalc->losr++;
1272                 }
1273         }
1274
1275         if (conf->fr_mode != PC300_FR_UNFRAMED) {
1276                 /* Verify AIS alarm */
1277                 if (frs0 & FRS0_AIS) {
1278                         if (!pfalc->blue_alarm) {
1279                                 pfalc->blue_alarm = 1;
1280                                 pfalc->ais++;
1281                                 // EVENT_AIS
1282                                 if (conf->media == IF_IFACE_T1) {
1283                                         /* Disable this interrupt as it may otherwise interfere with                       other working boards. */
1284                                         cpc_writeb(falcbase + F_REG(IMR0, ch),
1285                                                    cpc_readb(falcbase + F_REG(IMR0, ch)) | IMR0_PDEN);
1286                                 }
1287                                 falc_disable_comm(card, ch);
1288                                 // EVENT_AIS
1289                         }
1290                 } else {
1291                         pfalc->blue_alarm = 0;
1292                 }
1293
1294                 /* Verify LFA */
1295                 if (frs0 & FRS0_LFA) {
1296                         if (!pfalc->loss_fa) {
1297                                 pfalc->loss_fa = 1;
1298                                 pfalc->lfa++;
1299                                 if (!pfalc->blue_alarm && !pfalc->red_alarm) {
1300                                         // EVENT_FALC_ABNORMAL
1301                                         if (conf->media == IF_IFACE_T1) {
1302                                                 /* Disable this interrupt as it may otherwise
1303                                                  * interfere with other working boards. */
1304                                                 cpc_writeb(falcbase + F_REG(IMR0, ch),
1305                                                            cpc_readb(falcbase + F_REG(IMR0, ch))
1306                                                            | IMR0_PDEN);
1307                                         }
1308                                         falc_disable_comm(card, ch);
1309                                         // EVENT_FALC_ABNORMAL
1310                                 }
1311                         }
1312                 } else {
1313                         if (pfalc->loss_fa) {
1314                                 pfalc->loss_fa = 0;
1315                                 pfalc->farec++;
1316                         }
1317                 }
1318
1319                 /* Verify LMFA */
1320                 if (pfalc->multiframe_mode && (frs0 & FRS0_LMFA)) {
1321                         /* D4 or CRC4 frame mode */
1322                         if (!pfalc->loss_mfa) {
1323                                 pfalc->loss_mfa = 1;
1324                                 pfalc->lmfa++;
1325                                 if (!pfalc->blue_alarm && !pfalc->red_alarm &&
1326                                     !pfalc->loss_fa) {
1327                                         // EVENT_FALC_ABNORMAL
1328                                         if (conf->media == IF_IFACE_T1) {
1329                                                 /* Disable this interrupt as it may otherwise
1330                                                  * interfere with other working boards. */
1331                                                 cpc_writeb(falcbase + F_REG(IMR0, ch),
1332                                                            cpc_readb(falcbase + F_REG(IMR0, ch))
1333                                                            | IMR0_PDEN);
1334                                         }
1335                                         falc_disable_comm(card, ch);
1336                                         // EVENT_FALC_ABNORMAL
1337                                 }
1338                         }
1339                 } else {
1340                         pfalc->loss_mfa = 0;
1341                 }
1342
1343                 /* Verify Remote Alarm */
1344                 if (frs0 & FRS0_RRA) {
1345                         if (!pfalc->yellow_alarm) {
1346                                 pfalc->yellow_alarm = 1;
1347                                 pfalc->rai++;
1348                                 if (pfalc->sync) {
1349                                         // EVENT_RAI
1350                                         falc_disable_comm(card, ch);
1351                                         // EVENT_RAI
1352                                 }
1353                         }
1354                 } else {
1355                         pfalc->yellow_alarm = 0;
1356                 }
1357         } /* if !PC300_UNFRAMED */
1358
1359         if (pfalc->red_alarm || pfalc->loss_fa ||
1360             pfalc->loss_mfa || pfalc->blue_alarm) {
1361                 if (pfalc->sync) {
1362                         pfalc->sync = 0;
1363                         chan->d.line_off++;
1364                         cpc_writeb(falcbase + card->hw.cpld_reg2,
1365                                    cpc_readb(falcbase + card->hw.cpld_reg2) &
1366                                    ~(CPLD_REG2_FALC_LED2 << (2 * ch)));
1367                 }
1368         } else {
1369                 if (!pfalc->sync) {
1370                         pfalc->sync = 1;
1371                         chan->d.line_on++;
1372                         cpc_writeb(falcbase + card->hw.cpld_reg2,
1373                                    cpc_readb(falcbase + card->hw.cpld_reg2) |
1374                                    (CPLD_REG2_FALC_LED2 << (2 * ch)));
1375                 }
1376         }
1377
1378         if (pfalc->sync && !pfalc->yellow_alarm) {
1379                 if (!pfalc->active) {
1380                         // EVENT_FALC_NORMAL
1381                         if (pfalc->loop_active) {
1382                                 return;
1383                         }
1384                         if (conf->media == IF_IFACE_T1) {
1385                                 cpc_writeb(falcbase + F_REG(IMR0, ch),
1386                                            cpc_readb(falcbase + F_REG(IMR0, ch)) & ~IMR0_PDEN);
1387                         }
1388                         falc_enable_comm(card, ch);
1389                         // EVENT_FALC_NORMAL
1390                         pfalc->active = 1;
1391                 }
1392         } else {
1393                 if (pfalc->active) {
1394                         pfalc->active = 0;
1395                 }
1396         }
1397 }
1398
1399 static void falc_update_stats(pc300_t * card, int ch)
1400 {
1401         pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
1402         pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
1403         falc_t *pfalc = (falc_t *) & chan->falc;
1404         void __iomem *falcbase = card->hw.falcbase;
1405         u16 counter;
1406
1407         counter = cpc_readb(falcbase + F_REG(FECL, ch));
1408         counter |= cpc_readb(falcbase + F_REG(FECH, ch)) << 8;
1409         pfalc->fec += counter;
1410
1411         counter = cpc_readb(falcbase + F_REG(CVCL, ch));
1412         counter |= cpc_readb(falcbase + F_REG(CVCH, ch)) << 8;
1413         pfalc->cvc += counter;
1414
1415         counter = cpc_readb(falcbase + F_REG(CECL, ch));
1416         counter |= cpc_readb(falcbase + F_REG(CECH, ch)) << 8;
1417         pfalc->cec += counter;
1418
1419         counter = cpc_readb(falcbase + F_REG(EBCL, ch));
1420         counter |= cpc_readb(falcbase + F_REG(EBCH, ch)) << 8;
1421         pfalc->ebc += counter;
1422
1423         if (cpc_readb(falcbase + F_REG(LCR1, ch)) & LCR1_EPRM) {
1424                 mdelay(10);
1425                 counter = cpc_readb(falcbase + F_REG(BECL, ch));
1426                 counter |= cpc_readb(falcbase + F_REG(BECH, ch)) << 8;
1427                 pfalc->bec += counter;
1428
1429                 if (((conf->media == IF_IFACE_T1) &&
1430                      (cpc_readb(falcbase + F_REG(FRS1, ch)) & FRS1_LLBAD) &&
1431                      (!(cpc_readb(falcbase + F_REG(FRS1, ch)) & FRS1_PDEN)))
1432                     ||
1433                     ((conf->media == IF_IFACE_E1) &&
1434                      (cpc_readb(falcbase + F_REG(RSP, ch)) & RSP_LLBAD))) {
1435                         pfalc->prbs = 2;
1436                 } else {
1437                         pfalc->prbs = 1;
1438                 }
1439         }
1440 }
1441
1442 /*----------------------------------------------------------------------------
1443  * falc_remote_loop
1444  *----------------------------------------------------------------------------
1445  * Description: In the remote loopback mode the clock and data recovered
1446  *              from the line inputs RL1/2 or RDIP/RDIN are routed back
1447  *              to the line outputs XL1/2 or XDOP/XDON via the analog
1448  *              transmitter. As in normal mode they are processsed by
1449  *              the synchronizer and then sent to the system interface.
1450  *----------------------------------------------------------------------------
1451  */
1452 static void falc_remote_loop(pc300_t * card, int ch, int loop_on)
1453 {
1454         pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
1455         pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
1456         falc_t *pfalc = (falc_t *) & chan->falc;
1457         void __iomem *falcbase = card->hw.falcbase;
1458
1459         if (loop_on) {
1460                 // EVENT_FALC_ABNORMAL
1461                 if (conf->media == IF_IFACE_T1) {
1462                         /* Disable this interrupt as it may otherwise interfere with
1463                          * other working boards. */
1464                         cpc_writeb(falcbase + F_REG(IMR0, ch),
1465                                    cpc_readb(falcbase + F_REG(IMR0, ch)) | IMR0_PDEN);
1466                 }
1467                 falc_disable_comm(card, ch);
1468                 // EVENT_FALC_ABNORMAL
1469                 cpc_writeb(falcbase + F_REG(LIM1, ch),
1470                            cpc_readb(falcbase + F_REG(LIM1, ch)) | LIM1_RL);
1471                 pfalc->loop_active = 1;
1472         } else {
1473                 cpc_writeb(falcbase + F_REG(LIM1, ch),
1474                            cpc_readb(falcbase + F_REG(LIM1, ch)) & ~LIM1_RL);
1475                 pfalc->sync = 0;
1476                 cpc_writeb(falcbase + card->hw.cpld_reg2,
1477                            cpc_readb(falcbase + card->hw.cpld_reg2) &
1478                            ~(CPLD_REG2_FALC_LED2 << (2 * ch)));
1479                 pfalc->active = 0;
1480                 falc_issue_cmd(card, ch, CMDR_XRES);
1481                 pfalc->loop_active = 0;
1482         }
1483 }
1484
1485 /*----------------------------------------------------------------------------
1486  * falc_local_loop
1487  *----------------------------------------------------------------------------
1488  * Description: The local loopback mode disconnects the receive lines
1489  *              RL1/RL2 resp. RDIP/RDIN from the receiver. Instead of the
1490  *              signals coming from the line the data provided by system
1491  *              interface are routed through the analog receiver back to
1492  *              the system interface. The unipolar bit stream will be
1493  *              undisturbed transmitted on the line. Receiver and transmitter
1494  *              coding must be identical.
1495  *----------------------------------------------------------------------------
1496  */
1497 static void falc_local_loop(pc300_t * card, int ch, int loop_on)
1498 {
1499         pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
1500         falc_t *pfalc = (falc_t *) & chan->falc;
1501         void __iomem *falcbase = card->hw.falcbase;
1502
1503         if (loop_on) {
1504                 cpc_writeb(falcbase + F_REG(LIM0, ch),
1505                            cpc_readb(falcbase + F_REG(LIM0, ch)) | LIM0_LL);
1506                 pfalc->loop_active = 1;
1507         } else {
1508                 cpc_writeb(falcbase + F_REG(LIM0, ch),
1509                            cpc_readb(falcbase + F_REG(LIM0, ch)) & ~LIM0_LL);
1510                 pfalc->loop_active = 0;
1511         }
1512 }
1513
1514 /*----------------------------------------------------------------------------
1515  * falc_payload_loop
1516  *----------------------------------------------------------------------------
1517  * Description: This routine allows to enable/disable payload loopback.
1518  *              When the payload loop is activated, the received 192 bits
1519  *              of payload data will be looped back to the transmit
1520  *              direction. The framing bits, CRC6 and DL bits are not
1521  *              looped. They are originated by the FALC-LH transmitter.
1522  *----------------------------------------------------------------------------
1523  */
1524 static void falc_payload_loop(pc300_t * card, int ch, int loop_on)
1525 {
1526         pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
1527         pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
1528         falc_t *pfalc = (falc_t *) & chan->falc;
1529         void __iomem *falcbase = card->hw.falcbase;
1530
1531         if (loop_on) {
1532                 // EVENT_FALC_ABNORMAL
1533                 if (conf->media == IF_IFACE_T1) {
1534                         /* Disable this interrupt as it may otherwise interfere with
1535                          * other working boards. */
1536                         cpc_writeb(falcbase + F_REG(IMR0, ch),
1537                                    cpc_readb(falcbase + F_REG(IMR0, ch)) | IMR0_PDEN);
1538                 }
1539                 falc_disable_comm(card, ch);
1540                 // EVENT_FALC_ABNORMAL
1541                 cpc_writeb(falcbase + F_REG(FMR2, ch),
1542                            cpc_readb(falcbase + F_REG(FMR2, ch)) | FMR2_PLB);
1543                 if (conf->media == IF_IFACE_T1) {
1544                         cpc_writeb(falcbase + F_REG(FMR4, ch),
1545                                    cpc_readb(falcbase + F_REG(FMR4, ch)) | FMR4_TM);
1546                 } else {
1547                         cpc_writeb(falcbase + F_REG(FMR5, ch),
1548                                    cpc_readb(falcbase + F_REG(FMR5, ch)) | XSP_TT0);
1549                 }
1550                 falc_open_all_timeslots(card, ch);
1551                 pfalc->loop_active = 2;
1552         } else {
1553                 cpc_writeb(falcbase + F_REG(FMR2, ch),
1554                            cpc_readb(falcbase + F_REG(FMR2, ch)) & ~FMR2_PLB);
1555                 if (conf->media == IF_IFACE_T1) {
1556                         cpc_writeb(falcbase + F_REG(FMR4, ch),
1557                                    cpc_readb(falcbase + F_REG(FMR4, ch)) & ~FMR4_TM);
1558                 } else {
1559                         cpc_writeb(falcbase + F_REG(FMR5, ch),
1560                                    cpc_readb(falcbase + F_REG(FMR5, ch)) & ~XSP_TT0);
1561                 }
1562                 pfalc->sync = 0;
1563                 cpc_writeb(falcbase + card->hw.cpld_reg2,
1564                            cpc_readb(falcbase + card->hw.cpld_reg2) &
1565                            ~(CPLD_REG2_FALC_LED2 << (2 * ch)));
1566                 pfalc->active = 0;
1567                 falc_issue_cmd(card, ch, CMDR_XRES);
1568                 pfalc->loop_active = 0;
1569         }
1570 }
1571
1572 /*----------------------------------------------------------------------------
1573  * turn_off_xlu
1574  *----------------------------------------------------------------------------
1575  * Description: Turns XLU bit off in the proper register
1576  *----------------------------------------------------------------------------
1577  */
1578 static void turn_off_xlu(pc300_t * card, int ch)
1579 {
1580         pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
1581         pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
1582         void __iomem *falcbase = card->hw.falcbase;
1583
1584         if (conf->media == IF_IFACE_T1) {
1585                 cpc_writeb(falcbase + F_REG(FMR5, ch),
1586                            cpc_readb(falcbase + F_REG(FMR5, ch)) & ~FMR5_XLU);
1587         } else {
1588                 cpc_writeb(falcbase + F_REG(FMR3, ch),
1589                            cpc_readb(falcbase + F_REG(FMR3, ch)) & ~FMR3_XLU);
1590         }
1591 }
1592
1593 /*----------------------------------------------------------------------------
1594  * turn_off_xld
1595  *----------------------------------------------------------------------------
1596  * Description: Turns XLD bit off in the proper register
1597  *----------------------------------------------------------------------------
1598  */
1599 static void turn_off_xld(pc300_t * card, int ch)
1600 {
1601         pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
1602         pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
1603         void __iomem *falcbase = card->hw.falcbase;
1604
1605         if (conf->media == IF_IFACE_T1) {
1606                 cpc_writeb(falcbase + F_REG(FMR5, ch),
1607                            cpc_readb(falcbase + F_REG(FMR5, ch)) & ~FMR5_XLD);
1608         } else {
1609                 cpc_writeb(falcbase + F_REG(FMR3, ch),
1610                            cpc_readb(falcbase + F_REG(FMR3, ch)) & ~FMR3_XLD);
1611         }
1612 }
1613
1614 /*----------------------------------------------------------------------------
1615  * falc_generate_loop_up_code
1616  *----------------------------------------------------------------------------
1617  * Description: This routine writes the proper FALC chip register in order
1618  *              to generate a LOOP activation code over a T1/E1 line.
1619  *----------------------------------------------------------------------------
1620  */
1621 static void falc_generate_loop_up_code(pc300_t * card, int ch)
1622 {
1623         pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
1624         pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
1625         falc_t *pfalc = (falc_t *) & chan->falc;
1626         void __iomem *falcbase = card->hw.falcbase;
1627
1628         if (conf->media == IF_IFACE_T1) {
1629                 cpc_writeb(falcbase + F_REG(FMR5, ch),
1630                            cpc_readb(falcbase + F_REG(FMR5, ch)) | FMR5_XLU);
1631         } else {
1632                 cpc_writeb(falcbase + F_REG(FMR3, ch),
1633                            cpc_readb(falcbase + F_REG(FMR3, ch)) | FMR3_XLU);
1634         }
1635         // EVENT_FALC_ABNORMAL
1636         if (conf->media == IF_IFACE_T1) {
1637                 /* Disable this interrupt as it may otherwise interfere with
1638                  * other working boards. */
1639                 cpc_writeb(falcbase + F_REG(IMR0, ch),
1640                            cpc_readb(falcbase + F_REG(IMR0, ch)) | IMR0_PDEN);
1641         }
1642         falc_disable_comm(card, ch);
1643         // EVENT_FALC_ABNORMAL
1644         pfalc->loop_gen = 1;
1645 }
1646
1647 /*----------------------------------------------------------------------------
1648  * falc_generate_loop_down_code
1649  *----------------------------------------------------------------------------
1650  * Description: This routine writes the proper FALC chip register in order
1651  *              to generate a LOOP deactivation code over a T1/E1 line.
1652  *----------------------------------------------------------------------------
1653  */
1654 static void falc_generate_loop_down_code(pc300_t * card, int ch)
1655 {
1656         pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
1657         pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
1658         falc_t *pfalc = (falc_t *) & chan->falc;
1659         void __iomem *falcbase = card->hw.falcbase;
1660
1661         if (conf->media == IF_IFACE_T1) {
1662                 cpc_writeb(falcbase + F_REG(FMR5, ch),
1663                            cpc_readb(falcbase + F_REG(FMR5, ch)) | FMR5_XLD);
1664         } else {
1665                 cpc_writeb(falcbase + F_REG(FMR3, ch),
1666                            cpc_readb(falcbase + F_REG(FMR3, ch)) | FMR3_XLD);
1667         }
1668         pfalc->sync = 0;
1669         cpc_writeb(falcbase + card->hw.cpld_reg2,
1670                    cpc_readb(falcbase + card->hw.cpld_reg2) &
1671                    ~(CPLD_REG2_FALC_LED2 << (2 * ch)));
1672         pfalc->active = 0;
1673 //?    falc_issue_cmd(card, ch, CMDR_XRES);
1674         pfalc->loop_gen = 0;
1675 }
1676
1677 /*----------------------------------------------------------------------------
1678  * falc_pattern_test
1679  *----------------------------------------------------------------------------
1680  * Description: This routine generates a pattern code and checks
1681  *              it on the reception side.
1682  *----------------------------------------------------------------------------
1683  */
1684 static void falc_pattern_test(pc300_t * card, int ch, unsigned int activate)
1685 {
1686         pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
1687         pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
1688         falc_t *pfalc = (falc_t *) & chan->falc;
1689         void __iomem *falcbase = card->hw.falcbase;
1690
1691         if (activate) {
1692                 pfalc->prbs = 1;
1693                 pfalc->bec = 0;
1694                 if (conf->media == IF_IFACE_T1) {
1695                         /* Disable local loop activation/deactivation detect */
1696                         cpc_writeb(falcbase + F_REG(IMR3, ch),
1697                                    cpc_readb(falcbase + F_REG(IMR3, ch)) | IMR3_LLBSC);
1698                 } else {
1699                         /* Disable local loop activation/deactivation detect */
1700                         cpc_writeb(falcbase + F_REG(IMR1, ch),
1701                                    cpc_readb(falcbase + F_REG(IMR1, ch)) | IMR1_LLBSC);
1702                 }
1703                 /* Activates generation and monitoring of PRBS
1704                  * (Pseudo Random Bit Sequence) */
1705                 cpc_writeb(falcbase + F_REG(LCR1, ch),
1706                            cpc_readb(falcbase + F_REG(LCR1, ch)) | LCR1_EPRM | LCR1_XPRBS);
1707         } else {
1708                 pfalc->prbs = 0;
1709                 /* Deactivates generation and monitoring of PRBS
1710                  * (Pseudo Random Bit Sequence) */
1711                 cpc_writeb(falcbase + F_REG(LCR1, ch),
1712                            cpc_readb(falcbase+F_REG(LCR1,ch)) & ~(LCR1_EPRM | LCR1_XPRBS));
1713                 if (conf->media == IF_IFACE_T1) {
1714                         /* Enable local loop activation/deactivation detect */
1715                         cpc_writeb(falcbase + F_REG(IMR3, ch),
1716                                    cpc_readb(falcbase + F_REG(IMR3, ch)) & ~IMR3_LLBSC);
1717                 } else {
1718                         /* Enable local loop activation/deactivation detect */
1719                         cpc_writeb(falcbase + F_REG(IMR1, ch),
1720                                    cpc_readb(falcbase + F_REG(IMR1, ch)) & ~IMR1_LLBSC);
1721                 }
1722         }
1723 }
1724
1725 /*----------------------------------------------------------------------------
1726  * falc_pattern_test_error
1727  *----------------------------------------------------------------------------
1728  * Description: This routine returns the bit error counter value
1729  *----------------------------------------------------------------------------
1730  */
1731 static u16 falc_pattern_test_error(pc300_t * card, int ch)
1732 {
1733         pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
1734         falc_t *pfalc = (falc_t *) & chan->falc;
1735
1736         return (pfalc->bec);
1737 }
1738
1739 /**********************************/
1740 /***   Net Interface Routines   ***/
1741 /**********************************/
1742
1743 static void
1744 cpc_trace(struct net_device *dev, struct sk_buff *skb_main, char rx_tx)
1745 {
1746         struct sk_buff *skb;
1747
1748         if ((skb = dev_alloc_skb(10 + skb_main->len)) == NULL) {
1749                 printk("%s: out of memory\n", dev->name);
1750                 return;
1751         }
1752         skb_put(skb, 10 + skb_main->len);
1753
1754         skb->dev = dev;
1755         skb->protocol = htons(ETH_P_CUST);
1756         skb_reset_mac_header(skb);
1757         skb->pkt_type = PACKET_HOST;
1758         skb->len = 10 + skb_main->len;
1759
1760         skb_copy_to_linear_data(skb, dev->name, 5);
1761         skb->data[5] = '[';
1762         skb->data[6] = rx_tx;
1763         skb->data[7] = ']';
1764         skb->data[8] = ':';
1765         skb->data[9] = ' ';
1766         skb_copy_from_linear_data(skb_main, &skb->data[10], skb_main->len);
1767
1768         netif_rx(skb);
1769 }
1770
1771 static void cpc_tx_timeout(struct net_device *dev)
1772 {
1773         pc300dev_t *d = (pc300dev_t *) dev_to_hdlc(dev)->priv;
1774         pc300ch_t *chan = (pc300ch_t *) d->chan;
1775         pc300_t *card = (pc300_t *) chan->card;
1776         int ch = chan->channel;
1777         unsigned long flags;
1778         u8 ilar;
1779
1780         dev->stats.tx_errors++;
1781         dev->stats.tx_aborted_errors++;
1782         CPC_LOCK(card, flags);
1783         if ((ilar = cpc_readb(card->hw.scabase + ILAR)) != 0) {
1784                 printk("%s: ILAR=0x%x\n", dev->name, ilar);
1785                 cpc_writeb(card->hw.scabase + ILAR, ilar);
1786                 cpc_writeb(card->hw.scabase + DMER, 0x80);
1787         }
1788         if (card->hw.type == PC300_TE) {
1789                 cpc_writeb(card->hw.falcbase + card->hw.cpld_reg2,
1790                            cpc_readb(card->hw.falcbase + card->hw.cpld_reg2) &
1791                            ~(CPLD_REG2_FALC_LED1 << (2 * ch)));
1792         }
1793         dev->trans_start = jiffies;
1794         CPC_UNLOCK(card, flags);
1795         netif_wake_queue(dev);
1796 }
1797
1798 static int cpc_queue_xmit(struct sk_buff *skb, struct net_device *dev)
1799 {
1800         pc300dev_t *d = (pc300dev_t *) dev_to_hdlc(dev)->priv;
1801         pc300ch_t *chan = (pc300ch_t *) d->chan;
1802         pc300_t *card = (pc300_t *) chan->card;
1803         int ch = chan->channel;
1804         unsigned long flags;
1805 #ifdef PC300_DEBUG_TX
1806         int i;
1807 #endif
1808
1809         if (!netif_carrier_ok(dev)) {
1810                 /* DCD must be OFF: drop packet */
1811                 dev_kfree_skb(skb);
1812                 dev->stats.tx_errors++;
1813                 dev->stats.tx_carrier_errors++;
1814                 return 0;
1815         } else if (cpc_readb(card->hw.scabase + M_REG(ST3, ch)) & ST3_DCD) {
1816                 printk("%s: DCD is OFF. Going administrative down.\n", dev->name);
1817                 dev->stats.tx_errors++;
1818                 dev->stats.tx_carrier_errors++;
1819                 dev_kfree_skb(skb);
1820                 netif_carrier_off(dev);
1821                 CPC_LOCK(card, flags);
1822                 cpc_writeb(card->hw.scabase + M_REG(CMD, ch), CMD_TX_BUF_CLR);
1823                 if (card->hw.type == PC300_TE) {
1824                         cpc_writeb(card->hw.falcbase + card->hw.cpld_reg2,
1825                                    cpc_readb(card->hw.falcbase + card->hw.cpld_reg2) &
1826                                                         ~(CPLD_REG2_FALC_LED1 << (2 * ch)));
1827                 }
1828                 CPC_UNLOCK(card, flags);
1829                 netif_wake_queue(dev);
1830                 return 0;
1831         }
1832
1833         /* Write buffer to DMA buffers */
1834         if (dma_buf_write(card, ch, (u8 *)skb->data, skb->len) != 0) {
1835 //              printk("%s: write error. Dropping TX packet.\n", dev->name);
1836                 netif_stop_queue(dev);
1837                 dev_kfree_skb(skb);
1838                 dev->stats.tx_errors++;
1839                 dev->stats.tx_dropped++;
1840                 return 0;
1841         }
1842 #ifdef PC300_DEBUG_TX
1843         printk("%s T:", dev->name);
1844         for (i = 0; i < skb->len; i++)
1845                 printk(" %02x", *(skb->data + i));
1846         printk("\n");
1847 #endif
1848
1849         if (d->trace_on) {
1850                 cpc_trace(dev, skb, 'T');
1851         }
1852         dev->trans_start = jiffies;
1853
1854         /* Start transmission */
1855         CPC_LOCK(card, flags);
1856         /* verify if it has more than one free descriptor */
1857         if (card->chan[ch].nfree_tx_bd <= 1) {
1858                 /* don't have so stop the queue */
1859                 netif_stop_queue(dev);
1860         }
1861         cpc_writel(card->hw.scabase + DTX_REG(EDAL, ch),
1862                    TX_BD_ADDR(ch, chan->tx_next_bd));
1863         cpc_writeb(card->hw.scabase + M_REG(CMD, ch), CMD_TX_ENA);
1864         cpc_writeb(card->hw.scabase + DSR_TX(ch), DSR_DE);
1865         if (card->hw.type == PC300_TE) {
1866                 cpc_writeb(card->hw.falcbase + card->hw.cpld_reg2,
1867                            cpc_readb(card->hw.falcbase + card->hw.cpld_reg2) |
1868                            (CPLD_REG2_FALC_LED1 << (2 * ch)));
1869         }
1870         CPC_UNLOCK(card, flags);
1871         dev_kfree_skb(skb);
1872
1873         return 0;
1874 }
1875
1876 static void cpc_net_rx(struct net_device *dev)
1877 {
1878         pc300dev_t *d = (pc300dev_t *) dev_to_hdlc(dev)->priv;
1879         pc300ch_t *chan = (pc300ch_t *) d->chan;
1880         pc300_t *card = (pc300_t *) chan->card;
1881         int ch = chan->channel;
1882 #ifdef PC300_DEBUG_RX
1883         int i;
1884 #endif
1885         int rxb;
1886         struct sk_buff *skb;
1887
1888         while (1) {
1889                 if ((rxb = dma_get_rx_frame_size(card, ch)) == -1)
1890                         return;
1891
1892                 if (!netif_carrier_ok(dev)) {
1893                         /* DCD must be OFF: drop packet */
1894                     printk("%s : DCD is OFF - drop %d rx bytes\n", dev->name, rxb);
1895                         skb = NULL;
1896                 } else {
1897                         if (rxb > (dev->mtu + 40)) { /* add headers */
1898                                 printk("%s : MTU exceeded %d\n", dev->name, rxb);
1899                                 skb = NULL;
1900                         } else {
1901                                 skb = dev_alloc_skb(rxb);
1902                                 if (skb == NULL) {
1903                                         printk("%s: Memory squeeze!!\n", dev->name);
1904                                         return;
1905                                 }
1906                                 skb->dev = dev;
1907                         }
1908                 }
1909
1910                 if (((rxb = dma_buf_read(card, ch, skb)) <= 0) || (skb == NULL)) {
1911 #ifdef PC300_DEBUG_RX
1912                         printk("%s: rxb = %x\n", dev->name, rxb);
1913 #endif
1914                         if ((skb == NULL) && (rxb > 0)) {
1915                                 /* rxb > dev->mtu */
1916                                 dev->stats.rx_errors++;
1917                                 dev->stats.rx_length_errors++;
1918                                 continue;
1919                         }
1920
1921                         if (rxb < 0) {  /* Invalid frame */
1922                                 rxb = -rxb;
1923                                 if (rxb & DST_OVR) {
1924                                         dev->stats.rx_errors++;
1925                                         dev->stats.rx_fifo_errors++;
1926                                 }
1927                                 if (rxb & DST_CRC) {
1928                                         dev->stats.rx_errors++;
1929                                         dev->stats.rx_crc_errors++;
1930                                 }
1931                                 if (rxb & (DST_RBIT | DST_SHRT | DST_ABT)) {
1932                                         dev->stats.rx_errors++;
1933                                         dev->stats.rx_frame_errors++;
1934                                 }
1935                         }
1936                         if (skb) {
1937                                 dev_kfree_skb_irq(skb);
1938                         }
1939                         continue;
1940                 }
1941
1942                 dev->stats.rx_bytes += rxb;
1943
1944 #ifdef PC300_DEBUG_RX
1945                 printk("%s R:", dev->name);
1946                 for (i = 0; i < skb->len; i++)
1947                         printk(" %02x", *(skb->data + i));
1948                 printk("\n");
1949 #endif
1950                 if (d->trace_on) {
1951                         cpc_trace(dev, skb, 'R');
1952                 }
1953                 dev->stats.rx_packets++;
1954                 skb->protocol = hdlc_type_trans(skb, dev);
1955                 netif_rx(skb);
1956         }
1957 }
1958
1959 /************************************/
1960 /***   PC300 Interrupt Routines   ***/
1961 /************************************/
1962 static void sca_tx_intr(pc300dev_t *dev)
1963 {
1964         pc300ch_t *chan = (pc300ch_t *)dev->chan;
1965         pc300_t *card = (pc300_t *)chan->card;
1966         int ch = chan->channel;
1967         volatile pcsca_bd_t __iomem * ptdescr;
1968
1969     /* Clean up descriptors from previous transmission */
1970         ptdescr = (card->hw.rambase +
1971                                                 TX_BD_ADDR(ch,chan->tx_first_bd));
1972         while ((cpc_readl(card->hw.scabase + DTX_REG(CDAL,ch)) !=
1973                 TX_BD_ADDR(ch,chan->tx_first_bd)) &&
1974                (cpc_readb(&ptdescr->status) & DST_OSB)) {
1975                 dev->dev->stats.tx_packets++;
1976                 dev->dev->stats.tx_bytes += cpc_readw(&ptdescr->len);
1977                 cpc_writeb(&ptdescr->status, DST_OSB);
1978                 cpc_writew(&ptdescr->len, 0);
1979                 chan->nfree_tx_bd++;
1980                 chan->tx_first_bd = (chan->tx_first_bd + 1) & (N_DMA_TX_BUF - 1);
1981                 ptdescr = (card->hw.rambase + TX_BD_ADDR(ch,chan->tx_first_bd));
1982     }
1983
1984 #ifdef CONFIG_PC300_MLPPP
1985         if (chan->conf.proto == PC300_PROTO_MLPPP) {
1986                         cpc_tty_trigger_poll(dev);
1987         } else {
1988 #endif
1989         /* Tell the upper layer we are ready to transmit more packets */
1990                 netif_wake_queue(dev->dev);
1991 #ifdef CONFIG_PC300_MLPPP
1992         }
1993 #endif
1994 }
1995
1996 static void sca_intr(pc300_t * card)
1997 {
1998         void __iomem *scabase = card->hw.scabase;
1999         volatile u32 status;
2000         int ch;
2001         int intr_count = 0;
2002         unsigned char dsr_rx;
2003
2004         while ((status = cpc_readl(scabase + ISR0)) != 0) {
2005                 for (ch = 0; ch < card->hw.nchan; ch++) {
2006                         pc300ch_t *chan = &card->chan[ch];
2007                         pc300dev_t *d = &chan->d;
2008                         struct net_device *dev = d->dev;
2009
2010                         spin_lock(&card->card_lock);
2011
2012             /**** Reception ****/
2013                         if (status & IR0_DRX((IR0_DMIA | IR0_DMIB), ch)) {
2014                                 u8 drx_stat = cpc_readb(scabase + DSR_RX(ch));
2015
2016                                 /* Clear RX interrupts */
2017                                 cpc_writeb(scabase + DSR_RX(ch), drx_stat | DSR_DWE);
2018
2019 #ifdef PC300_DEBUG_INTR
2020                                 printk ("sca_intr: RX intr chan[%d] (st=0x%08lx, dsr=0x%02x)\n",
2021                                          ch, status, drx_stat);
2022 #endif
2023                                 if (status & IR0_DRX(IR0_DMIA, ch)) {
2024                                         if (drx_stat & DSR_BOF) {
2025 #ifdef CONFIG_PC300_MLPPP
2026                                                 if (chan->conf.proto == PC300_PROTO_MLPPP) {
2027                                                         /* verify if driver is TTY */
2028                                                         if ((cpc_readb(scabase + DSR_RX(ch)) & DSR_DE)) {
2029                                                                 rx_dma_stop(card, ch);
2030                                                         }
2031                                                         cpc_tty_receive(d);
2032                                                         rx_dma_start(card, ch);
2033                                                 } else
2034 #endif
2035                                                 {
2036                                                         if ((cpc_readb(scabase + DSR_RX(ch)) & DSR_DE)) {
2037                                                                 rx_dma_stop(card, ch);
2038                                                         }
2039                                                         cpc_net_rx(dev);
2040                                                         /* Discard invalid frames */
2041                                                         dev->stats.rx_errors++;
2042                                                         dev->stats.rx_over_errors++;
2043                                                         chan->rx_first_bd = 0;
2044                                                         chan->rx_last_bd = N_DMA_RX_BUF - 1;
2045                                                         rx_dma_start(card, ch);
2046                                                 }
2047                                         }
2048                                 }
2049                                 if (status & IR0_DRX(IR0_DMIB, ch)) {
2050                                         if (drx_stat & DSR_EOM) {
2051                                                 if (card->hw.type == PC300_TE) {
2052                                                         cpc_writeb(card->hw.falcbase +
2053                                                                    card->hw.cpld_reg2,
2054                                                                    cpc_readb (card->hw.falcbase +
2055                                                                         card->hw.cpld_reg2) |
2056                                                                    (CPLD_REG2_FALC_LED1 << (2 * ch)));
2057                                                 }
2058 #ifdef CONFIG_PC300_MLPPP
2059                                                 if (chan->conf.proto == PC300_PROTO_MLPPP) {
2060                                                         /* verify if driver is TTY */
2061                                                         cpc_tty_receive(d);
2062                                                 } else {
2063                                                         cpc_net_rx(dev);
2064                                                 }
2065 #else
2066                                                 cpc_net_rx(dev);
2067 #endif
2068                                                 if (card->hw.type == PC300_TE) {
2069                                                         cpc_writeb(card->hw.falcbase +
2070                                                                    card->hw.cpld_reg2,
2071                                                                    cpc_readb (card->hw.falcbase +
2072                                                                                 card->hw.cpld_reg2) &
2073                                                                    ~ (CPLD_REG2_FALC_LED1 << (2 * ch)));
2074                                                 }
2075                                         }
2076                                 }
2077                                 if (!(dsr_rx = cpc_readb(scabase + DSR_RX(ch)) & DSR_DE)) {
2078 #ifdef PC300_DEBUG_INTR
2079                 printk("%s: RX intr chan[%d] (st=0x%08lx, dsr=0x%02x, dsr2=0x%02x)\n",
2080                         dev->name, ch, status, drx_stat, dsr_rx);
2081 #endif
2082                                         cpc_writeb(scabase + DSR_RX(ch), (dsr_rx | DSR_DE) & 0xfe);
2083                                 }
2084                         }
2085
2086             /**** Transmission ****/
2087                         if (status & IR0_DTX((IR0_EFT | IR0_DMIA | IR0_DMIB), ch)) {
2088                                 u8 dtx_stat = cpc_readb(scabase + DSR_TX(ch));
2089
2090                                 /* Clear TX interrupts */
2091                                 cpc_writeb(scabase + DSR_TX(ch), dtx_stat | DSR_DWE);
2092
2093 #ifdef PC300_DEBUG_INTR
2094                                 printk ("sca_intr: TX intr chan[%d] (st=0x%08lx, dsr=0x%02x)\n",
2095                                          ch, status, dtx_stat);
2096 #endif
2097                                 if (status & IR0_DTX(IR0_EFT, ch)) {
2098                                         if (dtx_stat & DSR_UDRF) {
2099                                                 if (cpc_readb (scabase + M_REG(TBN, ch)) != 0) {
2100                                                         cpc_writeb(scabase + M_REG(CMD,ch), CMD_TX_BUF_CLR);
2101                                                 }
2102                                                 if (card->hw.type == PC300_TE) {
2103                                                         cpc_writeb(card->hw.falcbase + card->hw.cpld_reg2,
2104                                                                    cpc_readb (card->hw.falcbase +
2105                                                                                    card->hw.cpld_reg2) &
2106                                                                    ~ (CPLD_REG2_FALC_LED1 << (2 * ch)));
2107                                                 }
2108                                                 dev->stats.tx_errors++;
2109                                                 dev->stats.tx_fifo_errors++;
2110                                                 sca_tx_intr(d);
2111                                         }
2112                                 }
2113                                 if (status & IR0_DTX(IR0_DMIA, ch)) {
2114                                         if (dtx_stat & DSR_BOF) {
2115                                         }
2116                                 }
2117                                 if (status & IR0_DTX(IR0_DMIB, ch)) {
2118                                         if (dtx_stat & DSR_EOM) {
2119                                                 if (card->hw.type == PC300_TE) {
2120                                                         cpc_writeb(card->hw.falcbase + card->hw.cpld_reg2,
2121                                                                    cpc_readb (card->hw.falcbase +
2122                                                                                         card->hw.cpld_reg2) &
2123                                                                    ~ (CPLD_REG2_FALC_LED1 << (2 * ch)));
2124                                                 }
2125                                                 sca_tx_intr(d);
2126                                         }
2127                                 }
2128                         }
2129
2130             /**** MSCI ****/
2131                         if (status & IR0_M(IR0_RXINTA, ch)) {
2132                                 u8 st1 = cpc_readb(scabase + M_REG(ST1, ch));
2133
2134                                 /* Clear MSCI interrupts */
2135                                 cpc_writeb(scabase + M_REG(ST1, ch), st1);
2136
2137 #ifdef PC300_DEBUG_INTR
2138                                 printk("sca_intr: MSCI intr chan[%d] (st=0x%08lx, st1=0x%02x)\n",
2139                                          ch, status, st1);
2140 #endif
2141                                 if (st1 & ST1_CDCD) {   /* DCD changed */
2142                                         if (cpc_readb(scabase + M_REG(ST3, ch)) & ST3_DCD) {
2143                                                 printk ("%s: DCD is OFF. Going administrative down.\n",
2144                                                          dev->name);
2145 #ifdef CONFIG_PC300_MLPPP
2146                                                 if (chan->conf.proto != PC300_PROTO_MLPPP) {
2147                                                         netif_carrier_off(dev);
2148                                                 }
2149 #else
2150                                                 netif_carrier_off(dev);
2151
2152 #endif
2153                                                 card->chan[ch].d.line_off++;
2154                                         } else {        /* DCD = 1 */
2155                                                 printk ("%s: DCD is ON. Going administrative up.\n",
2156                                                          dev->name);
2157 #ifdef CONFIG_PC300_MLPPP
2158                                                 if (chan->conf.proto != PC300_PROTO_MLPPP)
2159                                                         /* verify if driver is not TTY */
2160 #endif
2161                                                         netif_carrier_on(dev);
2162                                                 card->chan[ch].d.line_on++;
2163                                         }
2164                                 }
2165                         }
2166                         spin_unlock(&card->card_lock);
2167                 }
2168                 if (++intr_count == 10)
2169                         /* Too much work at this board. Force exit */
2170                         break;
2171         }
2172 }
2173
2174 static void falc_t1_loop_detection(pc300_t *card, int ch, u8 frs1)
2175 {
2176         pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
2177         falc_t *pfalc = (falc_t *) & chan->falc;
2178         void __iomem *falcbase = card->hw.falcbase;
2179
2180         if (((cpc_readb(falcbase + F_REG(LCR1, ch)) & LCR1_XPRBS) == 0) &&
2181             !pfalc->loop_gen) {
2182                 if (frs1 & FRS1_LLBDD) {
2183                         // A Line Loop Back Deactivation signal detected
2184                         if (pfalc->loop_active) {
2185                                 falc_remote_loop(card, ch, 0);
2186                         }
2187                 } else {
2188                         if ((frs1 & FRS1_LLBAD) &&
2189                             ((cpc_readb(falcbase + F_REG(LCR1, ch)) & LCR1_EPRM) == 0)) {
2190                                 // A Line Loop Back Activation signal detected
2191                                 if (!pfalc->loop_active) {
2192                                         falc_remote_loop(card, ch, 1);
2193                                 }
2194                         }
2195                 }
2196         }
2197 }
2198
2199 static void falc_e1_loop_detection(pc300_t *card, int ch, u8 rsp)
2200 {
2201         pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
2202         falc_t *pfalc = (falc_t *) & chan->falc;
2203         void __iomem *falcbase = card->hw.falcbase;
2204
2205         if (((cpc_readb(falcbase + F_REG(LCR1, ch)) & LCR1_XPRBS) == 0) &&
2206             !pfalc->loop_gen) {
2207                 if (rsp & RSP_LLBDD) {
2208                         // A Line Loop Back Deactivation signal detected
2209                         if (pfalc->loop_active) {
2210                                 falc_remote_loop(card, ch, 0);
2211                         }
2212                 } else {
2213                         if ((rsp & RSP_LLBAD) &&
2214                             ((cpc_readb(falcbase + F_REG(LCR1, ch)) & LCR1_EPRM) == 0)) {
2215                                 // A Line Loop Back Activation signal detected
2216                                 if (!pfalc->loop_active) {
2217                                         falc_remote_loop(card, ch, 1);
2218                                 }
2219                         }
2220                 }
2221         }
2222 }
2223
2224 static void falc_t1_intr(pc300_t * card, int ch)
2225 {
2226         pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
2227         falc_t *pfalc = (falc_t *) & chan->falc;
2228         void __iomem *falcbase = card->hw.falcbase;
2229         u8 isr0, isr3, gis;
2230         u8 dummy;
2231
2232         while ((gis = cpc_readb(falcbase + F_REG(GIS, ch))) != 0) {
2233                 if (gis & GIS_ISR0) {
2234                         isr0 = cpc_readb(falcbase + F_REG(FISR0, ch));
2235                         if (isr0 & FISR0_PDEN) {
2236                                 /* Read the bit to clear the situation */
2237                                 if (cpc_readb(falcbase + F_REG(FRS1, ch)) &
2238                                     FRS1_PDEN) {
2239                                         pfalc->pden++;
2240                                 }
2241                         }
2242                 }
2243
2244                 if (gis & GIS_ISR1) {
2245                         dummy = cpc_readb(falcbase + F_REG(FISR1, ch));
2246                 }
2247
2248                 if (gis & GIS_ISR2) {
2249                         dummy = cpc_readb(falcbase + F_REG(FISR2, ch));
2250                 }
2251
2252                 if (gis & GIS_ISR3) {
2253                         isr3 = cpc_readb(falcbase + F_REG(FISR3, ch));
2254                         if (isr3 & FISR3_SEC) {
2255                                 pfalc->sec++;
2256                                 falc_update_stats(card, ch);
2257                                 falc_check_status(card, ch,
2258                                                   cpc_readb(falcbase + F_REG(FRS0, ch)));
2259                         }
2260                         if (isr3 & FISR3_ES) {
2261                                 pfalc->es++;
2262                         }
2263                         if (isr3 & FISR3_LLBSC) {
2264                                 falc_t1_loop_detection(card, ch,
2265                                                        cpc_readb(falcbase + F_REG(FRS1, ch)));
2266                         }
2267                 }
2268         }
2269 }
2270
2271 static void falc_e1_intr(pc300_t * card, int ch)
2272 {
2273         pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
2274         falc_t *pfalc = (falc_t *) & chan->falc;
2275         void __iomem *falcbase = card->hw.falcbase;
2276         u8 isr1, isr2, isr3, gis, rsp;
2277         u8 dummy;
2278
2279         while ((gis = cpc_readb(falcbase + F_REG(GIS, ch))) != 0) {
2280                 rsp = cpc_readb(falcbase + F_REG(RSP, ch));
2281
2282                 if (gis & GIS_ISR0) {
2283                         dummy = cpc_readb(falcbase + F_REG(FISR0, ch));
2284                 }
2285                 if (gis & GIS_ISR1) {
2286                         isr1 = cpc_readb(falcbase + F_REG(FISR1, ch));
2287                         if (isr1 & FISR1_XMB) {
2288                                 if ((pfalc->xmb_cause & 2)
2289                                     && pfalc->multiframe_mode) {
2290                                         if (cpc_readb (falcbase + F_REG(FRS0, ch)) &
2291                                                                         (FRS0_LOS | FRS0_AIS | FRS0_LFA)) {
2292                                                 cpc_writeb(falcbase + F_REG(XSP, ch),
2293                                                            cpc_readb(falcbase + F_REG(XSP, ch))
2294                                                            & ~XSP_AXS);
2295                                         } else {
2296                                                 cpc_writeb(falcbase + F_REG(XSP, ch),
2297                                                            cpc_readb(falcbase + F_REG(XSP, ch))
2298                                                            | XSP_AXS);
2299                                         }
2300                                 }
2301                                 pfalc->xmb_cause = 0;
2302                                 cpc_writeb(falcbase + F_REG(IMR1, ch),
2303                                            cpc_readb(falcbase + F_REG(IMR1, ch)) | IMR1_XMB);
2304                         }
2305                         if (isr1 & FISR1_LLBSC) {
2306                                 falc_e1_loop_detection(card, ch, rsp);
2307                         }
2308                 }
2309                 if (gis & GIS_ISR2) {
2310                         isr2 = cpc_readb(falcbase + F_REG(FISR2, ch));
2311                         if (isr2 & FISR2_T400MS) {
2312                                 cpc_writeb(falcbase + F_REG(XSW, ch),
2313                                            cpc_readb(falcbase + F_REG(XSW, ch)) | XSW_XRA);
2314                         }
2315                         if (isr2 & FISR2_MFAR) {
2316                                 cpc_writeb(falcbase + F_REG(XSW, ch),
2317                                            cpc_readb(falcbase + F_REG(XSW, ch)) & ~XSW_XRA);
2318                         }
2319                         if (isr2 & (FISR2_FAR | FISR2_LFA | FISR2_AIS | FISR2_LOS)) {
2320                                 pfalc->xmb_cause |= 2;
2321                                 cpc_writeb(falcbase + F_REG(IMR1, ch),
2322                                            cpc_readb(falcbase + F_REG(IMR1, ch)) & ~IMR1_XMB);
2323                         }
2324                 }
2325                 if (gis & GIS_ISR3) {
2326                         isr3 = cpc_readb(falcbase + F_REG(FISR3, ch));
2327                         if (isr3 & FISR3_SEC) {
2328                                 pfalc->sec++;
2329                                 falc_update_stats(card, ch);
2330                                 falc_check_status(card, ch,
2331                                                   cpc_readb(falcbase + F_REG(FRS0, ch)));
2332                         }
2333                         if (isr3 & FISR3_ES) {
2334                                 pfalc->es++;
2335                         }
2336                 }
2337         }
2338 }
2339
2340 static void falc_intr(pc300_t * card)
2341 {
2342         int ch;
2343
2344         for (ch = 0; ch < card->hw.nchan; ch++) {
2345                 pc300ch_t *chan = &card->chan[ch];
2346                 pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
2347
2348                 if (conf->media == IF_IFACE_T1) {
2349                         falc_t1_intr(card, ch);
2350                 } else {
2351                         falc_e1_intr(card, ch);
2352                 }
2353         }
2354 }
2355
2356 static irqreturn_t cpc_intr(int irq, void *dev_id)
2357 {
2358         pc300_t *card = dev_id;
2359         volatile u8 plx_status;
2360
2361         if (!card) {
2362 #ifdef PC300_DEBUG_INTR
2363                 printk("cpc_intr: spurious intr %d\n", irq);
2364 #endif
2365                 return IRQ_NONE;                /* spurious intr */
2366         }
2367
2368         if (!card->hw.rambase) {
2369 #ifdef PC300_DEBUG_INTR
2370                 printk("cpc_intr: spurious intr2 %d\n", irq);
2371 #endif
2372                 return IRQ_NONE;                /* spurious intr */
2373         }
2374
2375         switch (card->hw.type) {
2376                 case PC300_RSV:
2377                 case PC300_X21:
2378                         sca_intr(card);
2379                         break;
2380
2381                 case PC300_TE:
2382                         while ( (plx_status = (cpc_readb(card->hw.plxbase + card->hw.intctl_reg) &
2383                                  (PLX_9050_LINT1_STATUS | PLX_9050_LINT2_STATUS))) != 0) {
2384                                 if (plx_status & PLX_9050_LINT1_STATUS) {       /* SCA Interrupt */
2385                                         sca_intr(card);
2386                                 }
2387                                 if (plx_status & PLX_9050_LINT2_STATUS) {       /* FALC Interrupt */
2388                                         falc_intr(card);
2389                                 }
2390                         }
2391                         break;
2392         }
2393         return IRQ_HANDLED;
2394 }
2395
2396 static void cpc_sca_status(pc300_t * card, int ch)
2397 {
2398         u8 ilar;
2399         void __iomem *scabase = card->hw.scabase;
2400         unsigned long flags;
2401
2402         tx_dma_buf_check(card, ch);
2403         rx_dma_buf_check(card, ch);
2404         ilar = cpc_readb(scabase + ILAR);
2405         printk ("ILAR=0x%02x, WCRL=0x%02x, PCR=0x%02x, BTCR=0x%02x, BOLR=0x%02x\n",
2406                  ilar, cpc_readb(scabase + WCRL), cpc_readb(scabase + PCR),
2407                  cpc_readb(scabase + BTCR), cpc_readb(scabase + BOLR));
2408         printk("TX_CDA=0x%08x, TX_EDA=0x%08x\n",
2409                cpc_readl(scabase + DTX_REG(CDAL, ch)),
2410                cpc_readl(scabase + DTX_REG(EDAL, ch)));
2411         printk("RX_CDA=0x%08x, RX_EDA=0x%08x, BFL=0x%04x\n",
2412                cpc_readl(scabase + DRX_REG(CDAL, ch)),
2413                cpc_readl(scabase + DRX_REG(EDAL, ch)),
2414                cpc_readw(scabase + DRX_REG(BFLL, ch)));
2415         printk("DMER=0x%02x, DSR_TX=0x%02x, DSR_RX=0x%02x\n",
2416                cpc_readb(scabase + DMER), cpc_readb(scabase + DSR_TX(ch)),
2417                cpc_readb(scabase + DSR_RX(ch)));
2418         printk("DMR_TX=0x%02x, DMR_RX=0x%02x, DIR_TX=0x%02x, DIR_RX=0x%02x\n",
2419                cpc_readb(scabase + DMR_TX(ch)), cpc_readb(scabase + DMR_RX(ch)),
2420                cpc_readb(scabase + DIR_TX(ch)),
2421                cpc_readb(scabase + DIR_RX(ch)));
2422         printk("DCR_TX=0x%02x, DCR_RX=0x%02x, FCT_TX=0x%02x, FCT_RX=0x%02x\n",
2423                cpc_readb(scabase + DCR_TX(ch)), cpc_readb(scabase + DCR_RX(ch)),
2424                cpc_readb(scabase + FCT_TX(ch)),
2425                cpc_readb(scabase + FCT_RX(ch)));
2426         printk("MD0=0x%02x, MD1=0x%02x, MD2=0x%02x, MD3=0x%02x, IDL=0x%02x\n",
2427                cpc_readb(scabase + M_REG(MD0, ch)),
2428                cpc_readb(scabase + M_REG(MD1, ch)),
2429                cpc_readb(scabase + M_REG(MD2, ch)),
2430                cpc_readb(scabase + M_REG(MD3, ch)),
2431                cpc_readb(scabase + M_REG(IDL, ch)));
2432         printk("CMD=0x%02x, SA0=0x%02x, SA1=0x%02x, TFN=0x%02x, CTL=0x%02x\n",
2433                cpc_readb(scabase + M_REG(CMD, ch)),
2434                cpc_readb(scabase + M_REG(SA0, ch)),
2435                cpc_readb(scabase + M_REG(SA1, ch)),
2436                cpc_readb(scabase + M_REG(TFN, ch)),
2437                cpc_readb(scabase + M_REG(CTL, ch)));
2438         printk("ST0=0x%02x, ST1=0x%02x, ST2=0x%02x, ST3=0x%02x, ST4=0x%02x\n",
2439                cpc_readb(scabase + M_REG(ST0, ch)),
2440                cpc_readb(scabase + M_REG(ST1, ch)),
2441                cpc_readb(scabase + M_REG(ST2, ch)),
2442                cpc_readb(scabase + M_REG(ST3, ch)),
2443                cpc_readb(scabase + M_REG(ST4, ch)));
2444         printk ("CST0=0x%02x, CST1=0x%02x, CST2=0x%02x, CST3=0x%02x, FST=0x%02x\n",
2445                  cpc_readb(scabase + M_REG(CST0, ch)),
2446                  cpc_readb(scabase + M_REG(CST1, ch)),
2447                  cpc_readb(scabase + M_REG(CST2, ch)),
2448                  cpc_readb(scabase + M_REG(CST3, ch)),
2449                  cpc_readb(scabase + M_REG(FST, ch)));
2450         printk("TRC0=0x%02x, TRC1=0x%02x, RRC=0x%02x, TBN=0x%02x, RBN=0x%02x\n",
2451                cpc_readb(scabase + M_REG(TRC0, ch)),
2452                cpc_readb(scabase + M_REG(TRC1, ch)),
2453                cpc_readb(scabase + M_REG(RRC, ch)),
2454                cpc_readb(scabase + M_REG(TBN, ch)),
2455                cpc_readb(scabase + M_REG(RBN, ch)));
2456         printk("TFS=0x%02x, TNR0=0x%02x, TNR1=0x%02x, RNR=0x%02x\n",
2457                cpc_readb(scabase + M_REG(TFS, ch)),
2458                cpc_readb(scabase + M_REG(TNR0, ch)),
2459                cpc_readb(scabase + M_REG(TNR1, ch)),
2460                cpc_readb(scabase + M_REG(RNR, ch)));
2461         printk("TCR=0x%02x, RCR=0x%02x, TNR1=0x%02x, RNR=0x%02x\n",
2462                cpc_readb(scabase + M_REG(TCR, ch)),
2463                cpc_readb(scabase + M_REG(RCR, ch)),
2464                cpc_readb(scabase + M_REG(TNR1, ch)),
2465                cpc_readb(scabase + M_REG(RNR, ch)));
2466         printk("TXS=0x%02x, RXS=0x%02x, EXS=0x%02x, TMCT=0x%02x, TMCR=0x%02x\n",
2467                cpc_readb(scabase + M_REG(TXS, ch)),
2468                cpc_readb(scabase + M_REG(RXS, ch)),
2469                cpc_readb(scabase + M_REG(EXS, ch)),
2470                cpc_readb(scabase + M_REG(TMCT, ch)),
2471                cpc_readb(scabase + M_REG(TMCR, ch)));
2472         printk("IE0=0x%02x, IE1=0x%02x, IE2=0x%02x, IE4=0x%02x, FIE=0x%02x\n",
2473                cpc_readb(scabase + M_REG(IE0, ch)),
2474                cpc_readb(scabase + M_REG(IE1, ch)),
2475                cpc_readb(scabase + M_REG(IE2, ch)),
2476                cpc_readb(scabase + M_REG(IE4, ch)),
2477                cpc_readb(scabase + M_REG(FIE, ch)));
2478         printk("IER0=0x%08x\n", cpc_readl(scabase + IER0));
2479
2480         if (ilar != 0) {
2481                 CPC_LOCK(card, flags);
2482                 cpc_writeb(scabase + ILAR, ilar);
2483                 cpc_writeb(scabase + DMER, 0x80);
2484                 CPC_UNLOCK(card, flags);
2485         }
2486 }
2487
2488 static void cpc_falc_status(pc300_t * card, int ch)
2489 {
2490         pc300ch_t *chan = &card->chan[ch];
2491         falc_t *pfalc = (falc_t *) & chan->falc;
2492         unsigned long flags;
2493
2494         CPC_LOCK(card, flags);
2495         printk("CH%d:   %s %s  %d channels\n",
2496                ch, (pfalc->sync ? "SYNC" : ""), (pfalc->active ? "ACTIVE" : ""),
2497                pfalc->num_channels);
2498
2499         printk("        pden=%d,  los=%d,  losr=%d,  lfa=%d,  farec=%d\n",
2500                pfalc->pden, pfalc->los, pfalc->losr, pfalc->lfa, pfalc->farec);
2501         printk("        lmfa=%d,  ais=%d,  sec=%d,  es=%d,  rai=%d\n",
2502                pfalc->lmfa, pfalc->ais, pfalc->sec, pfalc->es, pfalc->rai);
2503         printk("        bec=%d,  fec=%d,  cvc=%d,  cec=%d,  ebc=%d\n",
2504                pfalc->bec, pfalc->fec, pfalc->cvc, pfalc->cec, pfalc->ebc);
2505
2506         printk("\n");
2507         printk("        STATUS: %s  %s  %s  %s  %s  %s\n",
2508                (pfalc->red_alarm ? "RED" : ""),
2509                (pfalc->blue_alarm ? "BLU" : ""),
2510                (pfalc->yellow_alarm ? "YEL" : ""),
2511                (pfalc->loss_fa ? "LFA" : ""),
2512                (pfalc->loss_mfa ? "LMF" : ""), (pfalc->prbs ? "PRB" : ""));
2513         CPC_UNLOCK(card, flags);
2514 }
2515
2516 static int cpc_change_mtu(struct net_device *dev, int new_mtu)
2517 {
2518         if ((new_mtu < 128) || (new_mtu > PC300_DEF_MTU))
2519                 return -EINVAL;
2520         dev->mtu = new_mtu;
2521         return 0;
2522 }
2523
2524 static int cpc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
2525 {
2526         pc300dev_t *d = (pc300dev_t *) dev_to_hdlc(dev)->priv;
2527         pc300ch_t *chan = (pc300ch_t *) d->chan;
2528         pc300_t *card = (pc300_t *) chan->card;
2529         pc300conf_t conf_aux;
2530         pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
2531         int ch = chan->channel;
2532         void __user *arg = ifr->ifr_data;
2533         struct if_settings *settings = &ifr->ifr_settings;
2534         void __iomem *scabase = card->hw.scabase;
2535
2536         if (!capable(CAP_NET_ADMIN))
2537                 return -EPERM;
2538
2539         switch (cmd) {
2540                 case SIOCGPC300CONF:
2541 #ifdef CONFIG_PC300_MLPPP
2542                         if (conf->proto != PC300_PROTO_MLPPP) {
2543                                 conf->proto = /* FIXME hdlc->proto.id */ 0;
2544                         }
2545 #else
2546                         conf->proto = /* FIXME hdlc->proto.id */ 0;
2547 #endif
2548                         memcpy(&conf_aux.conf, conf, sizeof(pc300chconf_t));
2549                         memcpy(&conf_aux.hw, &card->hw, sizeof(pc300hw_t));
2550                         if (!arg ||
2551                                 copy_to_user(arg, &conf_aux, sizeof(pc300conf_t)))
2552                                 return -EINVAL;
2553                         return 0;
2554                 case SIOCSPC300CONF:
2555                         if (!capable(CAP_NET_ADMIN))
2556                                 return -EPERM;
2557                         if (!arg ||
2558                                 copy_from_user(&conf_aux.conf, arg, sizeof(pc300chconf_t)))
2559                                 return -EINVAL;
2560                         if (card->hw.cpld_id < 0x02 &&
2561                             conf_aux.conf.fr_mode == PC300_FR_UNFRAMED) {
2562                                 /* CPLD_ID < 0x02 doesn't support Unframed E1 */
2563                                 return -EINVAL;
2564                         }
2565 #ifdef CONFIG_PC300_MLPPP
2566                         if (conf_aux.conf.proto == PC300_PROTO_MLPPP) {
2567                                 if (conf->proto != PC300_PROTO_MLPPP) {
2568                                         memcpy(conf, &conf_aux.conf, sizeof(pc300chconf_t));
2569                                         cpc_tty_init(d);        /* init TTY driver */
2570                                 }
2571                         } else {
2572                                 if (conf_aux.conf.proto == 0xffff) {
2573                                         if (conf->proto == PC300_PROTO_MLPPP){
2574                                                 /* ifdown interface */
2575                                                 cpc_close(dev);
2576                                         }
2577                                 } else {
2578                                         memcpy(conf, &conf_aux.conf, sizeof(pc300chconf_t));
2579                                         /* FIXME hdlc->proto.id = conf->proto; */
2580                                 }
2581                         }
2582 #else
2583                         memcpy(conf, &conf_aux.conf, sizeof(pc300chconf_t));
2584                         /* FIXME hdlc->proto.id = conf->proto; */
2585 #endif
2586                         return 0;
2587                 case SIOCGPC300STATUS:
2588                         cpc_sca_status(card, ch);
2589                         return 0;
2590                 case SIOCGPC300FALCSTATUS:
2591                         cpc_falc_status(card, ch);
2592                         return 0;
2593
2594                 case SIOCGPC300UTILSTATS:
2595                         {
2596                                 if (!arg) {     /* clear statistics */
2597                                         memset(&dev->stats, 0, sizeof(dev->stats));
2598                                         if (card->hw.type == PC300_TE) {
2599                                                 memset(&chan->falc, 0, sizeof(falc_t));
2600                                         }
2601                                 } else {
2602                                         pc300stats_t pc300stats;
2603
2604                                         memset(&pc300stats, 0, sizeof(pc300stats_t));
2605                                         pc300stats.hw_type = card->hw.type;
2606                                         pc300stats.line_on = card->chan[ch].d.line_on;
2607                                         pc300stats.line_off = card->chan[ch].d.line_off;
2608                                         memcpy(&pc300stats.gen_stats, &dev->stats,
2609                                                sizeof(dev->stats));
2610                                         if (card->hw.type == PC300_TE)
2611                                                 memcpy(&pc300stats.te_stats,&chan->falc,sizeof(falc_t));
2612                                         if (copy_to_user(arg, &pc300stats, sizeof(pc300stats_t)))
2613                                                 return -EFAULT;
2614                                 }
2615                                 return 0;
2616                         }
2617
2618                 case SIOCGPC300UTILSTATUS:
2619                         {
2620                                 struct pc300status pc300status;
2621
2622                                 pc300status.hw_type = card->hw.type;
2623                                 if (card->hw.type == PC300_TE) {
2624                                         pc300status.te_status.sync = chan->falc.sync;
2625                                         pc300status.te_status.red_alarm = chan->falc.red_alarm;
2626                                         pc300status.te_status.blue_alarm = chan->falc.blue_alarm;
2627                                         pc300status.te_status.loss_fa = chan->falc.loss_fa;
2628                                         pc300status.te_status.yellow_alarm =chan->falc.yellow_alarm;
2629                                         pc300status.te_status.loss_mfa = chan->falc.loss_mfa;
2630                                         pc300status.te_status.prbs = chan->falc.prbs;
2631                                 } else {
2632                                         pc300status.gen_status.dcd =
2633                                                 !(cpc_readb (scabase + M_REG(ST3, ch)) & ST3_DCD);
2634                                         pc300status.gen_status.cts =
2635                                                 !(cpc_readb (scabase + M_REG(ST3, ch)) & ST3_CTS);
2636                                         pc300status.gen_status.rts =
2637                                                 !(cpc_readb (scabase + M_REG(CTL, ch)) & CTL_RTS);
2638                                         pc300status.gen_status.dtr =
2639                                                 !(cpc_readb (scabase + M_REG(CTL, ch)) & CTL_DTR);
2640                                         /* There is no DSR in HD64572 */
2641                                 }
2642                                 if (!arg
2643                                     || copy_to_user(arg, &pc300status, sizeof(pc300status_t)))
2644                                                 return -EINVAL;
2645                                 return 0;
2646                         }
2647
2648                 case SIOCSPC300TRACE:
2649                         /* Sets/resets a trace_flag for the respective device */
2650                         if (!arg || copy_from_user(&d->trace_on, arg,sizeof(unsigned char)))
2651                                         return -EINVAL;
2652                         return 0;
2653
2654                 case SIOCSPC300LOOPBACK:
2655                         {
2656                                 struct pc300loopback pc300loop;
2657
2658                                 /* TE boards only */
2659                                 if (card->hw.type != PC300_TE)
2660                                         return -EINVAL;
2661
2662                                 if (!arg ||
2663                                         copy_from_user(&pc300loop, arg, sizeof(pc300loopback_t)))
2664                                                 return -EINVAL;
2665                                 switch (pc300loop.loop_type) {
2666                                         case PC300LOCLOOP:      /* Turn the local loop on/off */
2667                                                 falc_local_loop(card, ch, pc300loop.loop_on);
2668                                                 return 0;
2669
2670                                         case PC300REMLOOP:      /* Turn the remote loop on/off */
2671                                                 falc_remote_loop(card, ch, pc300loop.loop_on);
2672                                                 return 0;
2673
2674                                         case PC300PAYLOADLOOP:  /* Turn the payload loop on/off */
2675                                                 falc_payload_loop(card, ch, pc300loop.loop_on);
2676                                                 return 0;
2677
2678                                         case PC300GENLOOPUP:    /* Generate loop UP */
2679                                                 if (pc300loop.loop_on) {
2680                                                         falc_generate_loop_up_code (card, ch);
2681                                                 } else {
2682                                                         turn_off_xlu(card, ch);
2683                                                 }
2684                                                 return 0;
2685
2686                                         case PC300GENLOOPDOWN:  /* Generate loop DOWN */
2687                                                 if (pc300loop.loop_on) {
2688                                                         falc_generate_loop_down_code (card, ch);
2689                                                 } else {
2690                                                         turn_off_xld(card, ch);
2691                                                 }
2692                                                 return 0;
2693
2694                                         default:
2695                                                 return -EINVAL;
2696                                 }
2697                         }
2698
2699                 case SIOCSPC300PATTERNTEST:
2700                         /* Turn the pattern test on/off and show the errors counter */
2701                         {
2702                                 struct pc300patterntst pc300patrntst;
2703
2704                                 /* TE boards only */
2705                                 if (card->hw.type != PC300_TE)
2706                                         return -EINVAL;
2707
2708                                 if (card->hw.cpld_id < 0x02) {
2709                                         /* CPLD_ID < 0x02 doesn't support pattern test */
2710                                         return -EINVAL;
2711                                 }
2712
2713                                 if (!arg ||
2714                                         copy_from_user(&pc300patrntst,arg,sizeof(pc300patterntst_t)))
2715                                                 return -EINVAL;
2716                                 if (pc300patrntst.patrntst_on == 2) {
2717                                         if (chan->falc.prbs == 0) {
2718                                                 falc_pattern_test(card, ch, 1);
2719                                         }
2720                                         pc300patrntst.num_errors =
2721                                                 falc_pattern_test_error(card, ch);
2722                                         if (copy_to_user(arg, &pc300patrntst,
2723                                                          sizeof(pc300patterntst_t)))
2724                                                         return -EINVAL;
2725                                 } else {
2726                                         falc_pattern_test(card, ch, pc300patrntst.patrntst_on);
2727                                 }
2728                                 return 0;
2729                         }
2730
2731                 case SIOCWANDEV:
2732                         switch (ifr->ifr_settings.type) {
2733                                 case IF_GET_IFACE:
2734                                 {
2735                                         const size_t size = sizeof(sync_serial_settings);
2736                                         ifr->ifr_settings.type = conf->media;
2737                                         if (ifr->ifr_settings.size < size) {
2738                                                 /* data size wanted */
2739                                                 ifr->ifr_settings.size = size;
2740                                                 return -ENOBUFS;
2741                                         }
2742
2743                                         if (copy_to_user(settings->ifs_ifsu.sync,
2744                                                          &conf->phys_settings, size)) {
2745                                                 return -EFAULT;
2746                                         }
2747                                         return 0;
2748                                 }
2749
2750                                 case IF_IFACE_V35:
2751                                 case IF_IFACE_V24:
2752                                 case IF_IFACE_X21:
2753                                 {
2754                                         const size_t size = sizeof(sync_serial_settings);
2755
2756                                         if (!capable(CAP_NET_ADMIN)) {
2757                                                 return -EPERM;
2758                                         }
2759                                         /* incorrect data len? */
2760                                         if (ifr->ifr_settings.size != size) {
2761                                                 return -ENOBUFS;
2762                                         }
2763
2764                                         if (copy_from_user(&conf->phys_settings,
2765                                                            settings->ifs_ifsu.sync, size)) {
2766                                                 return -EFAULT;
2767                                         }
2768
2769                                         if (conf->phys_settings.loopback) {
2770                                                 cpc_writeb(card->hw.scabase + M_REG(MD2, ch),
2771                                                         cpc_readb(card->hw.scabase + M_REG(MD2, ch)) |
2772                                                         MD2_LOOP_MIR);
2773                                         }
2774                                         conf->media = ifr->ifr_settings.type;
2775                                         return 0;
2776                                 }
2777
2778                                 case IF_IFACE_T1:
2779                                 case IF_IFACE_E1:
2780                                 {
2781                                         const size_t te_size = sizeof(te1_settings);
2782                                         const size_t size = sizeof(sync_serial_settings);
2783
2784                                         if (!capable(CAP_NET_ADMIN)) {
2785                                                 return -EPERM;
2786                                         }
2787
2788                                         /* incorrect data len? */
2789                                         if (ifr->ifr_settings.size != te_size) {
2790                                                 return -ENOBUFS;
2791                                         }
2792
2793                                         if (copy_from_user(&conf->phys_settings,
2794                                                            settings->ifs_ifsu.te1, size)) {
2795                                                 return -EFAULT;
2796                                         }/* Ignoring HDLC slot_map for a while */
2797
2798                                         if (conf->phys_settings.loopback) {
2799                                                 cpc_writeb(card->hw.scabase + M_REG(MD2, ch),
2800                                                         cpc_readb(card->hw.scabase + M_REG(MD2, ch)) |
2801                                                         MD2_LOOP_MIR);
2802                                         }
2803                                         conf->media = ifr->ifr_settings.type;
2804                                         return 0;
2805                                 }
2806                                 default:
2807                                         return hdlc_ioctl(dev, ifr, cmd);
2808                         }
2809
2810                 default:
2811                         return hdlc_ioctl(dev, ifr, cmd);
2812         }
2813 }
2814
2815 static int clock_rate_calc(u32 rate, u32 clock, int *br_io)
2816 {
2817         int br, tc;
2818         int br_pwr, error;
2819
2820         *br_io = 0;
2821
2822         if (rate == 0)
2823                 return (0);
2824
2825         for (br = 0, br_pwr = 1; br <= 9; br++, br_pwr <<= 1) {
2826                 if ((tc = clock / br_pwr / rate) <= 0xff) {
2827                         *br_io = br;
2828                         break;
2829                 }
2830         }
2831
2832         if (tc <= 0xff) {
2833                 error = ((rate - (clock / br_pwr / rate)) / rate) * 1000;
2834                 /* Errors bigger than +/- 1% won't be tolerated */
2835                 if (error < -10 || error > 10)
2836                         return (-1);
2837                 else
2838                         return (tc);
2839         } else {
2840                 return (-1);
2841         }
2842 }
2843
2844 static int ch_config(pc300dev_t * d)
2845 {
2846         pc300ch_t *chan = (pc300ch_t *) d->chan;
2847         pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
2848         pc300_t *card = (pc300_t *) chan->card;
2849         void __iomem *scabase = card->hw.scabase;
2850         void __iomem *plxbase = card->hw.plxbase;
2851         int ch = chan->channel;
2852         u32 clkrate = chan->conf.phys_settings.clock_rate;
2853         u32 clktype = chan->conf.phys_settings.clock_type;
2854         u16 encoding = chan->conf.proto_settings.encoding;
2855         u16 parity = chan->conf.proto_settings.parity;
2856         u8 md0, md2;
2857
2858         /* Reset the channel */
2859         cpc_writeb(scabase + M_REG(CMD, ch), CMD_CH_RST);
2860
2861         /* Configure the SCA registers */
2862         switch (parity) {
2863                 case PARITY_NONE:
2864                         md0 = MD0_BIT_SYNC;
2865                         break;
2866                 case PARITY_CRC16_PR0:
2867                         md0 = MD0_CRC16_0|MD0_CRCC0|MD0_BIT_SYNC;
2868                         break;
2869                 case PARITY_CRC16_PR1:
2870                         md0 = MD0_CRC16_1|MD0_CRCC0|MD0_BIT_SYNC;
2871                         break;
2872                 case PARITY_CRC32_PR1_CCITT:
2873                         md0 = MD0_CRC32|MD0_CRCC0|MD0_BIT_SYNC;
2874                         break;
2875                 case PARITY_CRC16_PR1_CCITT:
2876                 default:
2877                         md0 = MD0_CRC_CCITT|MD0_CRCC0|MD0_BIT_SYNC;
2878                         break;
2879         }
2880         switch (encoding) {
2881                 case ENCODING_NRZI:
2882                         md2 = MD2_F_DUPLEX|MD2_ADPLL_X8|MD2_NRZI;
2883                         break;
2884                 case ENCODING_FM_MARK:  /* FM1 */
2885                         md2 = MD2_F_DUPLEX|MD2_ADPLL_X8|MD2_FM|MD2_FM1;
2886                         break;
2887                 case ENCODING_FM_SPACE: /* FM0 */
2888                         md2 = MD2_F_DUPLEX|MD2_ADPLL_X8|MD2_FM|MD2_FM0;
2889                         break;
2890                 case ENCODING_MANCHESTER: /* It's not working... */
2891                         md2 = MD2_F_DUPLEX|MD2_ADPLL_X8|MD2_FM|MD2_MANCH;
2892                         break;
2893                 case ENCODING_NRZ:
2894                 default:
2895                         md2 = MD2_F_DUPLEX|MD2_ADPLL_X8|MD2_NRZ;
2896                         break;
2897         }
2898         cpc_writeb(scabase + M_REG(MD0, ch), md0);
2899         cpc_writeb(scabase + M_REG(MD1, ch), 0);
2900         cpc_writeb(scabase + M_REG(MD2, ch), md2);
2901         cpc_writeb(scabase + M_REG(IDL, ch), 0x7e);
2902         cpc_writeb(scabase + M_REG(CTL, ch), CTL_URSKP | CTL_IDLC);
2903
2904         /* Configure HW media */
2905         switch (card->hw.type) {
2906                 case PC300_RSV:
2907                         if (conf->media == IF_IFACE_V35) {
2908                                 cpc_writel((plxbase + card->hw.gpioc_reg),
2909                                            cpc_readl(plxbase + card->hw.gpioc_reg) | PC300_CHMEDIA_MASK(ch));
2910                         } else {
2911                                 cpc_writel((plxbase + card->hw.gpioc_reg),
2912                                            cpc_readl(plxbase + card->hw.gpioc_reg) & ~PC300_CHMEDIA_MASK(ch));
2913                         }
2914                         break;
2915
2916                 case PC300_X21:
2917                         break;
2918
2919                 case PC300_TE:
2920                         te_config(card, ch);
2921                         break;
2922         }
2923
2924         switch (card->hw.type) {
2925                 case PC300_RSV:
2926                 case PC300_X21:
2927                         if (clktype == CLOCK_INT || clktype == CLOCK_TXINT) {
2928                                 int tmc, br;
2929
2930                                 /* Calculate the clkrate parameters */
2931                                 tmc = clock_rate_calc(clkrate, card->hw.clock, &br);
2932                                 if (tmc < 0)
2933                                         return -EIO;
2934                                 cpc_writeb(scabase + M_REG(TMCT, ch), tmc);
2935                                 cpc_writeb(scabase + M_REG(TXS, ch),
2936                                            (TXS_DTRXC | TXS_IBRG | br));
2937                                 if (clktype == CLOCK_INT) {
2938                                         cpc_writeb(scabase + M_REG(TMCR, ch), tmc);
2939                                         cpc_writeb(scabase + M_REG(RXS, ch),
2940                                                    (RXS_IBRG | br));
2941                                 } else {
2942                                         cpc_writeb(scabase + M_REG(TMCR, ch), 1);
2943                                         cpc_writeb(scabase + M_REG(RXS, ch), 0);
2944                                 }
2945                                 if (card->hw.type == PC300_X21) {
2946                                         cpc_writeb(scabase + M_REG(GPO, ch), 1);
2947                                         cpc_writeb(scabase + M_REG(EXS, ch), EXS_TES1 | EXS_RES1);
2948                                 } else {
2949                                         cpc_writeb(scabase + M_REG(EXS, ch), EXS_TES1);
2950                                 }
2951                         } else {
2952                                 cpc_writeb(scabase + M_REG(TMCT, ch), 1);
2953                                 if (clktype == CLOCK_EXT) {
2954                                         cpc_writeb(scabase + M_REG(TXS, ch),
2955                                                    TXS_DTRXC);
2956                                 } else {
2957                                         cpc_writeb(scabase + M_REG(TXS, ch),
2958                                                    TXS_DTRXC|TXS_RCLK);
2959                                 }
2960                                 cpc_writeb(scabase + M_REG(TMCR, ch), 1);
2961                                 cpc_writeb(scabase + M_REG(RXS, ch), 0);
2962                                 if (card->hw.type == PC300_X21) {
2963                                         cpc_writeb(scabase + M_REG(GPO, ch), 0);
2964                                         cpc_writeb(scabase + M_REG(EXS, ch), EXS_TES1 | EXS_RES1);
2965                                 } else {
2966                                         cpc_writeb(scabase + M_REG(EXS, ch), EXS_TES1);
2967                                 }
2968                         }
2969                         break;
2970
2971                 case PC300_TE:
2972                         /* SCA always receives clock from the FALC chip */
2973                         cpc_writeb(scabase + M_REG(TMCT, ch), 1);
2974                         cpc_writeb(scabase + M_REG(TXS, ch), 0);
2975                         cpc_writeb(scabase + M_REG(TMCR, ch), 1);
2976                         cpc_writeb(scabase + M_REG(RXS, ch), 0);
2977                         cpc_writeb(scabase + M_REG(EXS, ch), 0);
2978                         break;
2979         }
2980
2981         /* Enable Interrupts */
2982         cpc_writel(scabase + IER0,
2983                    cpc_readl(scabase + IER0) |
2984                    IR0_M(IR0_RXINTA, ch) |
2985                    IR0_DRX(IR0_EFT | IR0_DMIA | IR0_DMIB, ch) |
2986                    IR0_DTX(IR0_EFT | IR0_DMIA | IR0_DMIB, ch));
2987         cpc_writeb(scabase + M_REG(IE0, ch),
2988                    cpc_readl(scabase + M_REG(IE0, ch)) | IE0_RXINTA);
2989         cpc_writeb(scabase + M_REG(IE1, ch),
2990                    cpc_readl(scabase + M_REG(IE1, ch)) | IE1_CDCD);
2991
2992         return 0;
2993 }
2994
2995 static int rx_config(pc300dev_t * d)
2996 {
2997         pc300ch_t *chan = (pc300ch_t *) d->chan;
2998         pc300_t *card = (pc300_t *) chan->card;
2999         void __iomem *scabase = card->hw.scabase;
3000         int ch = chan->channel;
3001
3002         cpc_writeb(scabase + DSR_RX(ch), 0);
3003
3004         /* General RX settings */
3005         cpc_writeb(scabase + M_REG(RRC, ch), 0);
3006         cpc_writeb(scabase + M_REG(RNR, ch), 16);
3007
3008         /* Enable reception */
3009         cpc_writeb(scabase + M_REG(CMD, ch), CMD_RX_CRC_INIT);
3010         cpc_writeb(scabase + M_REG(CMD, ch), CMD_RX_ENA);
3011
3012         /* Initialize DMA stuff */
3013         chan->rx_first_bd = 0;
3014         chan->rx_last_bd = N_DMA_RX_BUF - 1;
3015         rx_dma_buf_init(card, ch);
3016         cpc_writeb(scabase + DCR_RX(ch), DCR_FCT_CLR);
3017         cpc_writeb(scabase + DMR_RX(ch), (DMR_TMOD | DMR_NF));
3018         cpc_writeb(scabase + DIR_RX(ch), (DIR_EOM | DIR_BOF));
3019
3020         /* Start DMA */
3021         rx_dma_start(card, ch);
3022
3023         return 0;
3024 }
3025
3026 static int tx_config(pc300dev_t * d)
3027 {
3028         pc300ch_t *chan = (pc300ch_t *) d->chan;
3029         pc300_t *card = (pc300_t *) chan->card;
3030         void __iomem *scabase = card->hw.scabase;
3031         int ch = chan->channel;
3032
3033         cpc_writeb(scabase + DSR_TX(ch), 0);
3034
3035         /* General TX settings */
3036         cpc_writeb(scabase + M_REG(TRC0, ch), 0);
3037         cpc_writeb(scabase + M_REG(TFS, ch), 32);
3038         cpc_writeb(scabase + M_REG(TNR0, ch), 20);
3039         cpc_writeb(scabase + M_REG(TNR1, ch), 48);
3040         cpc_writeb(scabase + M_REG(TCR, ch), 8);
3041
3042         /* Enable transmission */
3043         cpc_writeb(scabase + M_REG(CMD, ch), CMD_TX_CRC_INIT);
3044
3045         /* Initialize DMA stuff */
3046         chan->tx_first_bd = 0;
3047         chan->tx_next_bd = 0;
3048         tx_dma_buf_init(card, ch);
3049         cpc_writeb(scabase + DCR_TX(ch), DCR_FCT_CLR);
3050         cpc_writeb(scabase + DMR_TX(ch), (DMR_TMOD | DMR_NF));
3051         cpc_writeb(scabase + DIR_TX(ch), (DIR_EOM | DIR_BOF | DIR_UDRF));
3052         cpc_writel(scabase + DTX_REG(CDAL, ch), TX_BD_ADDR(ch, chan->tx_first_bd));
3053         cpc_writel(scabase + DTX_REG(EDAL, ch), TX_BD_ADDR(ch, chan->tx_next_bd));
3054
3055         return 0;
3056 }
3057
3058 static int cpc_attach(struct net_device *dev, unsigned short encoding,
3059                       unsigned short parity)
3060 {
3061         pc300dev_t *d = (pc300dev_t *)dev_to_hdlc(dev)->priv;
3062         pc300ch_t *chan = (pc300ch_t *)d->chan;
3063         pc300_t *card = (pc300_t *)chan->card;
3064         pc300chconf_t *conf = (pc300chconf_t *)&chan->conf;
3065
3066         if (card->hw.type == PC300_TE) {
3067                 if (encoding != ENCODING_NRZ && encoding != ENCODING_NRZI) {
3068                         return -EINVAL;
3069                 }
3070         } else {
3071                 if (encoding != ENCODING_NRZ && encoding != ENCODING_NRZI &&
3072                     encoding != ENCODING_FM_MARK && encoding != ENCODING_FM_SPACE) {
3073                         /* Driver doesn't support ENCODING_MANCHESTER yet */
3074                         return -EINVAL;
3075                 }
3076         }
3077
3078         if (parity != PARITY_NONE && parity != PARITY_CRC16_PR0 &&
3079             parity != PARITY_CRC16_PR1 && parity != PARITY_CRC32_PR1_CCITT &&
3080             parity != PARITY_CRC16_PR1_CCITT) {
3081                 return -EINVAL;
3082         }
3083
3084         conf->proto_settings.encoding = encoding;
3085         conf->proto_settings.parity = parity;
3086         return 0;
3087 }
3088
3089 static int cpc_opench(pc300dev_t * d)
3090 {
3091         pc300ch_t *chan = (pc300ch_t *) d->chan;
3092         pc300_t *card = (pc300_t *) chan->card;
3093         int ch = chan->channel, rc;
3094         void __iomem *scabase = card->hw.scabase;
3095
3096         rc = ch_config(d);
3097         if (rc)
3098                 return rc;
3099
3100         rx_config(d);
3101
3102         tx_config(d);
3103
3104         /* Assert RTS and DTR */
3105         cpc_writeb(scabase + M_REG(CTL, ch),
3106                    cpc_readb(scabase + M_REG(CTL, ch)) & ~(CTL_RTS | CTL_DTR));
3107
3108         return 0;
3109 }
3110
3111 static void cpc_closech(pc300dev_t * d)
3112 {
3113         pc300ch_t *chan = (pc300ch_t *) d->chan;
3114         pc300_t *card = (pc300_t *) chan->card;
3115         falc_t *pfalc = (falc_t *) & chan->falc;
3116         int ch = chan->channel;
3117
3118         cpc_writeb(card->hw.scabase + M_REG(CMD, ch), CMD_CH_RST);
3119         rx_dma_stop(card, ch);
3120         tx_dma_stop(card, ch);
3121
3122         if (card->hw.type == PC300_TE) {
3123                 memset(pfalc, 0, sizeof(falc_t));
3124                 cpc_writeb(card->hw.falcbase + card->hw.cpld_reg2,
3125                            cpc_readb(card->hw.falcbase + card->hw.cpld_reg2) &
3126                            ~((CPLD_REG2_FALC_TX_CLK | CPLD_REG2_FALC_RX_CLK |
3127                               CPLD_REG2_FALC_LED2) << (2 * ch)));
3128                 /* Reset the FALC chip */
3129                 cpc_writeb(card->hw.falcbase + card->hw.cpld_reg1,
3130                            cpc_readb(card->hw.falcbase + card->hw.cpld_reg1) |
3131                            (CPLD_REG1_FALC_RESET << (2 * ch)));
3132                 udelay(10000);
3133                 cpc_writeb(card->hw.falcbase + card->hw.cpld_reg1,
3134                            cpc_readb(card->hw.falcbase + card->hw.cpld_reg1) &
3135                            ~(CPLD_REG1_FALC_RESET << (2 * ch)));
3136         }
3137 }
3138
3139 int cpc_open(struct net_device *dev)
3140 {
3141         pc300dev_t *d = (pc300dev_t *) dev_to_hdlc(dev)->priv;
3142         struct ifreq ifr;
3143         int result;
3144
3145 #ifdef  PC300_DEBUG_OTHER
3146         printk("pc300: cpc_open");
3147 #endif
3148
3149         result = hdlc_open(dev);
3150
3151         if (result)
3152                 return result;
3153
3154         sprintf(ifr.ifr_name, "%s", dev->name);
3155         result = cpc_opench(d);
3156         if (result)
3157                 goto err_out;
3158
3159         netif_start_queue(dev);
3160         return 0;
3161
3162 err_out:
3163         hdlc_close(dev);
3164         return result;
3165 }
3166
3167 static int cpc_close(struct net_device *dev)
3168 {
3169         pc300dev_t *d = (pc300dev_t *) dev_to_hdlc(dev)->priv;
3170         pc300ch_t *chan = (pc300ch_t *) d->chan;
3171         pc300_t *card = (pc300_t *) chan->card;
3172         unsigned long flags;
3173
3174 #ifdef  PC300_DEBUG_OTHER
3175         printk("pc300: cpc_close");
3176 #endif
3177
3178         netif_stop_queue(dev);
3179
3180         CPC_LOCK(card, flags);
3181         cpc_closech(d);
3182         CPC_UNLOCK(card, flags);
3183
3184         hdlc_close(dev);
3185
3186 #ifdef CONFIG_PC300_MLPPP
3187         if (chan->conf.proto == PC300_PROTO_MLPPP) {
3188                 cpc_tty_unregister_service(d);
3189                 chan->conf.proto = 0xffff;
3190         }
3191 #endif
3192
3193         return 0;
3194 }
3195
3196 static u32 detect_ram(pc300_t * card)
3197 {
3198         u32 i;
3199         u8 data;
3200         void __iomem *rambase = card->hw.rambase;
3201
3202         card->hw.ramsize = PC300_RAMSIZE;
3203         /* Let's find out how much RAM is present on this board */
3204         for (i = 0; i < card->hw.ramsize; i++) {
3205                 data = (u8)(i & 0xff);
3206                 cpc_writeb(rambase + i, data);
3207                 if (cpc_readb(rambase + i) != data) {
3208                         break;
3209                 }
3210         }
3211         return (i);
3212 }
3213
3214 static void plx_init(pc300_t * card)
3215 {
3216         struct RUNTIME_9050 __iomem *plx_ctl = card->hw.plxbase;
3217
3218         /* Reset PLX */
3219         cpc_writel(&plx_ctl->init_ctrl,
3220                    cpc_readl(&plx_ctl->init_ctrl) | 0x40000000);
3221         udelay(10000L);
3222         cpc_writel(&plx_ctl->init_ctrl,
3223                    cpc_readl(&plx_ctl->init_ctrl) & ~0x40000000);
3224
3225         /* Reload Config. Registers from EEPROM */
3226         cpc_writel(&plx_ctl->init_ctrl,
3227                    cpc_readl(&plx_ctl->init_ctrl) | 0x20000000);
3228         udelay(10000L);
3229         cpc_writel(&plx_ctl->init_ctrl,
3230                    cpc_readl(&plx_ctl->init_ctrl) & ~0x20000000);
3231
3232 }
3233
3234 static inline void show_version(void)
3235 {
3236         char *rcsvers, *rcsdate, *tmp;
3237
3238         rcsvers = strchr(rcsid, ' ');
3239         rcsvers++;
3240         tmp = strchr(rcsvers, ' ');
3241         *tmp++ = '\0';
3242         rcsdate = strchr(tmp, ' ');
3243         rcsdate++;
3244         tmp = strrchr(rcsdate, ' ');
3245         *tmp = '\0';
3246         printk(KERN_INFO "Cyclades-PC300 driver %s %s (built %s %s)\n",
3247                 rcsvers, rcsdate, __DATE__, __TIME__);
3248 }                               /* show_version */
3249
3250 static const struct net_device_ops cpc_netdev_ops = {
3251         .ndo_open               = cpc_open,
3252         .ndo_stop               = cpc_close,
3253         .ndo_tx_timeout         = cpc_tx_timeout,
3254         .ndo_set_mac_address    = NULL,
3255         .ndo_change_mtu         = cpc_change_mtu,
3256         .ndo_do_ioctl           = cpc_ioctl,
3257         .ndo_validate_addr      = eth_validate_addr,
3258 };
3259
3260 static void cpc_init_card(pc300_t * card)
3261 {
3262         int i, devcount = 0;
3263         static int board_nbr = 1;
3264
3265         /* Enable interrupts on the PCI bridge */
3266         plx_init(card);
3267         cpc_writew(card->hw.plxbase + card->hw.intctl_reg,
3268                    cpc_readw(card->hw.plxbase + card->hw.intctl_reg) | 0x0040);
3269
3270 #ifdef USE_PCI_CLOCK
3271         /* Set board clock to PCI clock */
3272         cpc_writel(card->hw.plxbase + card->hw.gpioc_reg,
3273                    cpc_readl(card->hw.plxbase + card->hw.gpioc_reg) | 0x00000004UL);
3274         card->hw.clock = PC300_PCI_CLOCK;
3275 #else
3276         /* Set board clock to internal oscillator clock */
3277         cpc_writel(card->hw.plxbase + card->hw.gpioc_reg,
3278                    cpc_readl(card->hw.plxbase + card->hw.gpioc_reg) & ~0x00000004UL);
3279         card->hw.clock = PC300_OSC_CLOCK;
3280 #endif
3281
3282         /* Detect actual on-board RAM size */
3283         card->hw.ramsize = detect_ram(card);
3284
3285         /* Set Global SCA-II registers */
3286         cpc_writeb(card->hw.scabase + PCR, PCR_PR2);
3287         cpc_writeb(card->hw.scabase + BTCR, 0x10);
3288         cpc_writeb(card->hw.scabase + WCRL, 0);
3289         cpc_writeb(card->hw.scabase + DMER, 0x80);
3290
3291         if (card->hw.type == PC300_TE) {
3292                 u8 reg1;
3293
3294                 /* Check CPLD version */
3295                 reg1 = cpc_readb(card->hw.falcbase + CPLD_REG1);
3296                 cpc_writeb(card->hw.falcbase + CPLD_REG1, (reg1 + 0x5a));
3297                 if (cpc_readb(card->hw.falcbase + CPLD_REG1) == reg1) {
3298                         /* New CPLD */
3299                         card->hw.cpld_id = cpc_readb(card->hw.falcbase + CPLD_ID_REG);
3300                         card->hw.cpld_reg1 = CPLD_V2_REG1;
3301                         card->hw.cpld_reg2 = CPLD_V2_REG2;
3302                 } else {
3303                         /* old CPLD */
3304                         card->hw.cpld_id = 0;
3305                         card->hw.cpld_reg1 = CPLD_REG1;
3306                         card->hw.cpld_reg2 = CPLD_REG2;
3307                         cpc_writeb(card->hw.falcbase + CPLD_REG1, reg1);
3308                 }
3309
3310                 /* Enable the board's global clock */
3311                 cpc_writeb(card->hw.falcbase + card->hw.cpld_reg1,
3312                            cpc_readb(card->hw.falcbase + card->hw.cpld_reg1) |
3313                            CPLD_REG1_GLOBAL_CLK);
3314
3315         }
3316
3317         for (i = 0; i < card->hw.nchan; i++) {
3318                 pc300ch_t *chan = &card->chan[i];
3319                 pc300dev_t *d = &chan->d;
3320                 hdlc_device *hdlc;
3321                 struct net_device *dev;
3322
3323                 chan->card = card;
3324                 chan->channel = i;
3325                 chan->conf.phys_settings.clock_rate = 0;
3326                 chan->conf.phys_settings.clock_type = CLOCK_EXT;
3327                 chan->conf.proto_settings.encoding = ENCODING_NRZ;
3328                 chan->conf.proto_settings.parity = PARITY_CRC16_PR1_CCITT;
3329                 switch (card->hw.type) {
3330                         case PC300_TE:
3331                                 chan->conf.media = IF_IFACE_T1;
3332                                 chan->conf.lcode = PC300_LC_B8ZS;
3333                                 chan->conf.fr_mode = PC300_FR_ESF;
3334                                 chan->conf.lbo = PC300_LBO_0_DB;
3335                                 chan->conf.rx_sens = PC300_RX_SENS_SH;
3336                                 chan->conf.tslot_bitmap = 0xffffffffUL;
3337                                 break;
3338
3339                         case PC300_X21:
3340                                 chan->conf.media = IF_IFACE_X21;
3341                                 break;
3342
3343                         case PC300_RSV:
3344                         default:
3345                                 chan->conf.media = IF_IFACE_V35;
3346                                 break;
3347                 }
3348                 chan->conf.proto = IF_PROTO_PPP;
3349                 chan->tx_first_bd = 0;
3350                 chan->tx_next_bd = 0;
3351                 chan->rx_first_bd = 0;
3352                 chan->rx_last_bd = N_DMA_RX_BUF - 1;
3353                 chan->nfree_tx_bd = N_DMA_TX_BUF;
3354
3355                 d->chan = chan;
3356                 d->trace_on = 0;
3357                 d->line_on = 0;
3358                 d->line_off = 0;
3359
3360                 dev = alloc_hdlcdev(d);
3361                 if (dev == NULL)
3362                         continue;
3363
3364                 hdlc = dev_to_hdlc(dev);
3365                 hdlc->xmit = cpc_queue_xmit;
3366                 hdlc->attach = cpc_attach;
3367                 d->dev = dev;
3368                 dev->mem_start = card->hw.ramphys;
3369                 dev->mem_end = card->hw.ramphys + card->hw.ramsize - 1;
3370                 dev->irq = card->hw.irq;
3371                 dev->tx_queue_len = PC300_TX_QUEUE_LEN;
3372                 dev->mtu = PC300_DEF_MTU;
3373
3374                 dev->netdev_ops = &cpc_netdev_ops;
3375                 dev->watchdog_timeo = PC300_TX_TIMEOUT;
3376
3377                 if (register_hdlc_device(dev) == 0) {
3378                         printk("%s: Cyclades-PC300/", dev->name);
3379                         switch (card->hw.type) {
3380                                 case PC300_TE:
3381                                         if (card->hw.bus == PC300_PMC) {
3382                                                 printk("TE-M");
3383                                         } else {
3384                                                 printk("TE  ");
3385                                         }
3386                                         break;
3387
3388                                 case PC300_X21:
3389                                         printk("X21 ");
3390                                         break;
3391
3392                                 case PC300_RSV:
3393                                 default:
3394                                         printk("RSV ");
3395                                         break;
3396                         }
3397                         printk (" #%d, %dKB of RAM at 0x%08x, IRQ%d, channel %d.\n",
3398                                  board_nbr, card->hw.ramsize / 1024,
3399                                  card->hw.ramphys, card->hw.irq, i + 1);
3400                         devcount++;
3401                 } else {
3402                         printk ("Dev%d on card(0x%08x): unable to allocate i/f name.\n",
3403                                  i + 1, card->hw.ramphys);
3404                         free_netdev(dev);
3405                         continue;
3406                 }
3407         }
3408         spin_lock_init(&card->card_lock);
3409
3410         board_nbr++;
3411 }
3412
3413 static int __devinit
3414 cpc_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
3415 {
3416         static int first_time = 1;
3417         int err, eeprom_outdated = 0;
3418         u16 device_id;
3419         pc300_t *card;
3420
3421         if (first_time) {
3422                 first_time = 0;
3423                 show_version();
3424 #ifdef CONFIG_PC300_MLPPP
3425                 cpc_tty_reset_var();
3426 #endif
3427         }
3428
3429         if ((err = pci_enable_device(pdev)) < 0)
3430                 return err;
3431
3432         card = kzalloc(sizeof(pc300_t), GFP_KERNEL);
3433         if (card == NULL) {
3434                 printk("PC300 found at RAM 0x%016llx, "
3435                        "but could not allocate card structure.\n",
3436                        (unsigned long long)pci_resource_start(pdev, 3));
3437                 err = -ENOMEM;
3438                 goto err_disable_dev;
3439         }
3440
3441         err = -ENODEV;
3442
3443         /* read PCI configuration area */
3444         device_id = ent->device;
3445         card->hw.irq = pdev->irq;
3446         card->hw.iophys = pci_resource_start(pdev, 1);
3447         card->hw.iosize = pci_resource_len(pdev, 1);
3448         card->hw.scaphys = pci_resource_start(pdev, 2);
3449         card->hw.scasize = pci_resource_len(pdev, 2);
3450         card->hw.ramphys = pci_resource_start(pdev, 3);
3451         card->hw.alloc_ramsize = pci_resource_len(pdev, 3);
3452         card->hw.falcphys = pci_resource_start(pdev, 4);
3453         card->hw.falcsize = pci_resource_len(pdev, 4);
3454         card->hw.plxphys = pci_resource_start(pdev, 5);
3455         card->hw.plxsize = pci_resource_len(pdev, 5);
3456
3457         switch (device_id) {
3458                 case PCI_DEVICE_ID_PC300_RX_1:
3459                 case PCI_DEVICE_ID_PC300_TE_1:
3460                 case PCI_DEVICE_ID_PC300_TE_M_1:
3461                         card->hw.nchan = 1;
3462                         break;
3463
3464                 case PCI_DEVICE_ID_PC300_RX_2:
3465                 case PCI_DEVICE_ID_PC300_TE_2:
3466                 case PCI_DEVICE_ID_PC300_TE_M_2:
3467                 default:
3468                         card->hw.nchan = PC300_MAXCHAN;
3469                         break;
3470         }
3471 #ifdef PC300_DEBUG_PCI
3472         printk("cpc (bus=0x0%x,pci_id=0x%x,", pdev->bus->number, pdev->devfn);
3473         printk("rev_id=%d) IRQ%d\n", pdev->revision, card->hw.irq);
3474         printk("cpc:found  ramaddr=0x%08lx plxaddr=0x%08lx "
3475                "ctladdr=0x%08lx falcaddr=0x%08lx\n",
3476                card->hw.ramphys, card->hw.plxphys, card->hw.scaphys,
3477                card->hw.falcphys);
3478 #endif
3479         /* Although we don't use this I/O region, we should
3480          * request it from the kernel anyway, to avoid problems
3481          * with other drivers accessing it. */
3482         if (!request_region(card->hw.iophys, card->hw.iosize, "PLX Registers")) {
3483                 /* In case we can't allocate it, warn user */
3484                 printk("WARNING: couldn't allocate I/O region for PC300 board "
3485                        "at 0x%08x!\n", card->hw.ramphys);
3486         }
3487
3488         if (card->hw.plxphys) {
3489                 pci_write_config_dword(pdev, PCI_BASE_ADDRESS_0, card->hw.plxphys);
3490         } else {
3491                 eeprom_outdated = 1;
3492                 card->hw.plxphys = pci_resource_start(pdev, 0);
3493                 card->hw.plxsize = pci_resource_len(pdev, 0);
3494         }
3495
3496         if (!request_mem_region(card->hw.plxphys, card->hw.plxsize,
3497                                 "PLX Registers")) {
3498                 printk("PC300 found at RAM 0x%08x, "
3499                        "but could not allocate PLX mem region.\n",
3500                        card->hw.ramphys);
3501                 goto err_release_io;
3502         }
3503         if (!request_mem_region(card->hw.ramphys, card->hw.alloc_ramsize,
3504                                 "On-board RAM")) {
3505                 printk("PC300 found at RAM 0x%08x, "
3506                        "but could not allocate RAM mem region.\n",
3507                        card->hw.ramphys);
3508                 goto err_release_plx;
3509         }
3510         if (!request_mem_region(card->hw.scaphys, card->hw.scasize,
3511                                 "SCA-II Registers")) {
3512                 printk("PC300 found at RAM 0x%08x, "
3513                        "but could not allocate SCA mem region.\n",
3514                        card->hw.ramphys);
3515                 goto err_release_ram;
3516         }
3517
3518         card->hw.plxbase = ioremap(card->hw.plxphys, card->hw.plxsize);
3519         card->hw.rambase = ioremap(card->hw.ramphys, card->hw.alloc_ramsize);
3520         card->hw.scabase = ioremap(card->hw.scaphys, card->hw.scasize);
3521         switch (device_id) {
3522                 case PCI_DEVICE_ID_PC300_TE_1:
3523                 case PCI_DEVICE_ID_PC300_TE_2:
3524                 case PCI_DEVICE_ID_PC300_TE_M_1:
3525                 case PCI_DEVICE_ID_PC300_TE_M_2:
3526                         request_mem_region(card->hw.falcphys, card->hw.falcsize,
3527                                            "FALC Registers");
3528                         card->hw.falcbase = ioremap(card->hw.falcphys, card->hw.falcsize);
3529                         break;
3530
3531                 case PCI_DEVICE_ID_PC300_RX_1:
3532                 case PCI_DEVICE_ID_PC300_RX_2:
3533                 default:
3534                         card->hw.falcbase = NULL;
3535                         break;
3536         }
3537
3538 #ifdef PC300_DEBUG_PCI
3539         printk("cpc: relocate ramaddr=0x%08lx plxaddr=0x%08lx "
3540                "ctladdr=0x%08lx falcaddr=0x%08lx\n",
3541                card->hw.rambase, card->hw.plxbase, card->hw.scabase,
3542                card->hw.falcbase);
3543 #endif
3544
3545         /* Set PCI drv pointer to the card structure */
3546         pci_set_drvdata(pdev, card);
3547
3548         /* Set board type */
3549         switch (device_id) {
3550                 case PCI_DEVICE_ID_PC300_TE_1:
3551                 case PCI_DEVICE_ID_PC300_TE_2:
3552                 case PCI_DEVICE_ID_PC300_TE_M_1:
3553                 case PCI_DEVICE_ID_PC300_TE_M_2:
3554                         card->hw.type = PC300_TE;
3555
3556                         if ((device_id == PCI_DEVICE_ID_PC300_TE_M_1) ||
3557                             (device_id == PCI_DEVICE_ID_PC300_TE_M_2)) {
3558                                 card->hw.bus = PC300_PMC;
3559                                 /* Set PLX register offsets */
3560                                 card->hw.gpioc_reg = 0x54;
3561                                 card->hw.intctl_reg = 0x4c;
3562                         } else {
3563                                 card->hw.bus = PC300_PCI;
3564                                 /* Set PLX register offsets */
3565                                 card->hw.gpioc_reg = 0x50;
3566                                 card->hw.intctl_reg = 0x4c;
3567                         }
3568                         break;
3569
3570                 case PCI_DEVICE_ID_PC300_RX_1:
3571                 case PCI_DEVICE_ID_PC300_RX_2:
3572                 default:
3573                         card->hw.bus = PC300_PCI;
3574                         /* Set PLX register offsets */
3575                         card->hw.gpioc_reg = 0x50;
3576                         card->hw.intctl_reg = 0x4c;
3577
3578                         if ((cpc_readl(card->hw.plxbase + card->hw.gpioc_reg) & PC300_CTYPE_MASK)) {
3579                                 card->hw.type = PC300_X21;
3580                         } else {
3581                                 card->hw.type = PC300_RSV;
3582                         }
3583                         break;
3584         }
3585
3586         /* Allocate IRQ */
3587         if (request_irq(card->hw.irq, cpc_intr, IRQF_SHARED, "Cyclades-PC300", card)) {
3588                 printk ("PC300 found at RAM 0x%08x, but could not allocate IRQ%d.\n",
3589                          card->hw.ramphys, card->hw.irq);
3590                 goto err_io_unmap;
3591         }
3592
3593         cpc_init_card(card);
3594
3595         if (eeprom_outdated)
3596                 printk("WARNING: PC300 with outdated EEPROM.\n");
3597         return 0;
3598
3599 err_io_unmap:
3600         iounmap(card->hw.plxbase);
3601         iounmap(card->hw.scabase);
3602         iounmap(card->hw.rambase);
3603         if (card->hw.type == PC300_TE) {
3604                 iounmap(card->hw.falcbase);
3605                 release_mem_region(card->hw.falcphys, card->hw.falcsize);
3606         }
3607         release_mem_region(card->hw.scaphys, card->hw.scasize);
3608 err_release_ram:
3609         release_mem_region(card->hw.ramphys, card->hw.alloc_ramsize);
3610 err_release_plx:
3611         release_mem_region(card->hw.plxphys, card->hw.plxsize);
3612 err_release_io:
3613         release_region(card->hw.iophys, card->hw.iosize);
3614         kfree(card);
3615 err_disable_dev:
3616         pci_disable_device(pdev);
3617         return err;
3618 }
3619
3620 static void __devexit cpc_remove_one(struct pci_dev *pdev)
3621 {
3622         pc300_t *card = pci_get_drvdata(pdev);
3623
3624         if (card->hw.rambase) {
3625                 int i;
3626
3627                 /* Disable interrupts on the PCI bridge */
3628                 cpc_writew(card->hw.plxbase + card->hw.intctl_reg,
3629                            cpc_readw(card->hw.plxbase + card->hw.intctl_reg) & ~(0x0040));
3630
3631                 for (i = 0; i < card->hw.nchan; i++) {
3632                         unregister_hdlc_device(card->chan[i].d.dev);
3633                 }
3634                 iounmap(card->hw.plxbase);
3635                 iounmap(card->hw.scabase);
3636                 iounmap(card->hw.rambase);
3637                 release_mem_region(card->hw.plxphys, card->hw.plxsize);
3638                 release_mem_region(card->hw.ramphys, card->hw.alloc_ramsize);
3639                 release_mem_region(card->hw.scaphys, card->hw.scasize);
3640                 release_region(card->hw.iophys, card->hw.iosize);
3641                 if (card->hw.type == PC300_TE) {
3642                         iounmap(card->hw.falcbase);
3643                         release_mem_region(card->hw.falcphys, card->hw.falcsize);
3644                 }
3645                 for (i = 0; i < card->hw.nchan; i++)
3646                         if (card->chan[i].d.dev)
3647                                 free_netdev(card->chan[i].d.dev);
3648                 if (card->hw.irq)
3649                         free_irq(card->hw.irq, card);
3650                 kfree(card);
3651                 pci_disable_device(pdev);
3652         }
3653 }
3654
3655 static struct pci_driver cpc_driver = {
3656         .name           = "pc300",
3657         .id_table       = cpc_pci_dev_id,
3658         .probe          = cpc_init_one,
3659         .remove         = __devexit_p(cpc_remove_one),
3660 };
3661
3662 static int __init cpc_init(void)
3663 {
3664         return pci_register_driver(&cpc_driver);
3665 }
3666
3667 static void __exit cpc_cleanup_module(void)
3668 {
3669         pci_unregister_driver(&cpc_driver);
3670 }
3671
3672 module_init(cpc_init);
3673 module_exit(cpc_cleanup_module);
3674
3675 MODULE_DESCRIPTION("Cyclades-PC300 cards driver");
3676 MODULE_AUTHOR(  "Author: Ivan Passos <ivan@cyclades.com>\r\n"
3677                 "Maintainer: PC300 Maintainer <pc300@cyclades.com");
3678 MODULE_LICENSE("GPL");
3679