drivers/net/irda/smsc-ircc2.c

   1 /*********************************************************************
   2  * $Id: smsc-ircc2.c,v 1.19.2.5 2002/10/27 11:34:26 dip Exp $
   3  *
   4  * Description:   Driver for the SMC Infrared Communications Controller
   5  * Status:        Experimental.
   6  * Author:        Daniele Peri (peri@csai.unipa.it)
   7  * Created at:
   8  * Modified at:
   9  * Modified by:
  10  *
  11  *     Copyright (c) 2002      Daniele Peri
  12  *     All Rights Reserved.
  13  *     Copyright (c) 2002      Jean Tourrilhes
  14  *     Copyright (c) 2006      Linus Walleij
  15  *
  16  *
  17  * Based on smc-ircc.c:
  18  *
  19  *     Copyright (c) 2001      Stefani Seibold
  20  *     Copyright (c) 1999-2001 Dag Brattli
  21  *     Copyright (c) 1998-1999 Thomas Davis,
  22  *
  23  *      and irport.c:
  24  *
  25  *     Copyright (c) 1997, 1998, 1999-2000 Dag Brattli, All Rights Reserved.
  26  *
  27  *
  28  *     This program is free software; you can redistribute it and/or
  29  *     modify it under the terms of the GNU General Public License as
  30  *     published by the Free Software Foundation; either version 2 of
  31  *     the License, or (at your option) any later version.
  32  *
  33  *     This program is distributed in the hope that it will be useful,
  34  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  35  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  36  *     GNU General Public License for more details.
  37  *
  38  *     You should have received a copy of the GNU General Public License
  39  *     along with this program; if not, write to the Free Software
  40  *     Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  41  *     MA 02111-1307 USA
  42  *
  43  ********************************************************************/
  44
  45 #include <linux/module.h>
  46 #include <linux/kernel.h>
  47 #include <linux/types.h>
  48 #include <linux/skbuff.h>
  49 #include <linux/netdevice.h>
  50 #include <linux/ioport.h>
  51 #include <linux/delay.h>
  52 #include <linux/slab.h>
  53 #include <linux/init.h>
  54 #include <linux/rtnetlink.h>
  55 #include <linux/serial_reg.h>
  56 #include <linux/dma-mapping.h>
  57 #include <linux/pnp.h>
  58 #include <linux/platform_device.h>
  59
  60 #include <asm/io.h>
  61 #include <asm/dma.h>
  62 #include <asm/byteorder.h>
  63
  64 #include <linux/spinlock.h>
  65 #include <linux/pm.h>
  66 #ifdef CONFIG_PCI
  67 #include <linux/pci.h>
  68 #endif
  69
  70 #include <net/irda/wrapper.h>
  71 #include <net/irda/irda.h>
  72 #include <net/irda/irda_device.h>
  73
  74 #include "smsc-ircc2.h"
  75 #include "smsc-sio.h"
  76
  77
  78 MODULE_AUTHOR("Daniele Peri <peri@csai.unipa.it>");
  79 MODULE_DESCRIPTION("SMC IrCC SIR/FIR controller driver");
  80 MODULE_LICENSE("GPL");
  81
  82 static int ircc_dma = 255;
  83 module_param(ircc_dma, int, 0);
  84 MODULE_PARM_DESC(ircc_dma, "DMA channel");
  85
  86 static int ircc_irq = 255;
  87 module_param(ircc_irq, int, 0);
  88 MODULE_PARM_DESC(ircc_irq, "IRQ line");
  89
  90 static int ircc_fir;
  91 module_param(ircc_fir, int, 0);
  92 MODULE_PARM_DESC(ircc_fir, "FIR Base Address");
  93
  94 static int ircc_sir;
  95 module_param(ircc_sir, int, 0);
  96 MODULE_PARM_DESC(ircc_sir, "SIR Base Address");
  97
  98 static int ircc_cfg;
  99 module_param(ircc_cfg, int, 0);
 100 MODULE_PARM_DESC(ircc_cfg, "Configuration register base address");
 101
 102 static int ircc_transceiver;
 103 module_param(ircc_transceiver, int, 0);
 104 MODULE_PARM_DESC(ircc_transceiver, "Transceiver type");
 105
 106 /* Types */
 107
 108 #ifdef CONFIG_PCI
 109 struct smsc_ircc_subsystem_configuration {
 110         unsigned short vendor; /* PCI vendor ID */
 111         unsigned short device; /* PCI vendor ID */
 112         unsigned short subvendor; /* PCI subsystem vendor ID */
 113         unsigned short subdevice; /* PCI sybsystem device ID */
 114         unsigned short sir_io; /* I/O port for SIR */
 115         unsigned short fir_io; /* I/O port for FIR */
 116         unsigned char  fir_irq; /* FIR IRQ */
 117         unsigned char  fir_dma; /* FIR DMA */
 118         unsigned short cfg_base; /* I/O port for chip configuration */
 119         int (*preconfigure)(struct pci_dev *dev, struct smsc_ircc_subsystem_configuration *conf); /* Preconfig function */
 120         const char *name;       /* name shown as info */
 121 };
 122 #endif
 123
 124 struct smsc_transceiver {
 125         char *name;
 126         void (*set_for_speed)(int fir_base, u32 speed);
 127         int  (*probe)(int fir_base);
 128 };
 129
 130 struct smsc_chip {
 131         char *name;
 132         #if 0
 133         u8      type;
 134         #endif
 135         u16 flags;
 136         u8 devid;
 137         u8 rev;
 138 };
 139
 140 struct smsc_chip_address {
 141         unsigned int cfg_base;
 142         unsigned int type;
 143 };
 144
 145 /* Private data for each instance */
 146 struct smsc_ircc_cb {
 147         struct net_device *netdev;     /* Yes! we are some kind of netdevice */
 148         struct net_device_stats stats;
 149         struct irlap_cb    *irlap; /* The link layer we are binded to */
 150
 151         chipio_t io;               /* IrDA controller information */
 152         iobuff_t tx_buff;          /* Transmit buffer */
 153         iobuff_t rx_buff;          /* Receive buffer */
 154         dma_addr_t tx_buff_dma;
 155         dma_addr_t rx_buff_dma;
 156
 157         struct qos_info qos;       /* QoS capabilities for this device */
 158
 159         spinlock_t lock;           /* For serializing operations */
 160
 161         __u32 new_speed;
 162         __u32 flags;               /* Interface flags */
 163
 164         int tx_buff_offsets[10];   /* Offsets between frames in tx_buff */
 165         int tx_len;                /* Number of frames in tx_buff */
 166
 167         int transceiver;
 168         struct platform_device *pldev;
 169 };
 170
 171 /* Constants */
 172
 173 #define SMSC_IRCC2_DRIVER_NAME                  "smsc-ircc2"
 174
 175 #define SMSC_IRCC2_C_IRDA_FALLBACK_SPEED        9600
 176 #define SMSC_IRCC2_C_DEFAULT_TRANSCEIVER        1
 177 #define SMSC_IRCC2_C_NET_TIMEOUT                0
 178 #define SMSC_IRCC2_C_SIR_STOP                   0
 179
 180 static const char *driver_name = SMSC_IRCC2_DRIVER_NAME;
 181
 182 /* Prototypes */
 183
 184 static int smsc_ircc_open(unsigned int firbase, unsigned int sirbase, u8 dma, u8 irq);
 185 static int smsc_ircc_present(unsigned int fir_base, unsigned int sir_base);
 186 static void smsc_ircc_setup_io(struct smsc_ircc_cb *self, unsigned int fir_base, unsigned int sir_base, u8 dma, u8 irq);
 187 static void smsc_ircc_setup_qos(struct smsc_ircc_cb *self);
 188 static void smsc_ircc_init_chip(struct smsc_ircc_cb *self);
 189 static int __exit smsc_ircc_close(struct smsc_ircc_cb *self);
 190 static int  smsc_ircc_dma_receive(struct smsc_ircc_cb *self);
 191 static void smsc_ircc_dma_receive_complete(struct smsc_ircc_cb *self);
 192 static void smsc_ircc_sir_receive(struct smsc_ircc_cb *self);
 193 static int  smsc_ircc_hard_xmit_sir(struct sk_buff *skb, struct net_device *dev);
 194 static int  smsc_ircc_hard_xmit_fir(struct sk_buff *skb, struct net_device *dev);
 195 static void smsc_ircc_dma_xmit(struct smsc_ircc_cb *self, int bofs);
 196 static void smsc_ircc_dma_xmit_complete(struct smsc_ircc_cb *self);
 197 static void smsc_ircc_change_speed(struct smsc_ircc_cb *self, u32 speed);
 198 static void smsc_ircc_set_sir_speed(struct smsc_ircc_cb *self, u32 speed);
 199 static irqreturn_t smsc_ircc_interrupt(int irq, void *dev_id, struct pt_regs *regs);
 200 static irqreturn_t smsc_ircc_interrupt_sir(struct net_device *dev);
 201 static void smsc_ircc_sir_start(struct smsc_ircc_cb *self);
 202 #if SMSC_IRCC2_C_SIR_STOP
 203 static void smsc_ircc_sir_stop(struct smsc_ircc_cb *self);
 204 #endif
 205 static void smsc_ircc_sir_write_wakeup(struct smsc_ircc_cb *self);
 206 static int  smsc_ircc_sir_write(int iobase, int fifo_size, __u8 *buf, int len);
 207 static int  smsc_ircc_net_open(struct net_device *dev);
 208 static int  smsc_ircc_net_close(struct net_device *dev);
 209 static int  smsc_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
 210 #if SMSC_IRCC2_C_NET_TIMEOUT
 211 static void smsc_ircc_timeout(struct net_device *dev);
 212 #endif
 213 static struct net_device_stats *smsc_ircc_net_get_stats(struct net_device *dev);
 214 static int smsc_ircc_is_receiving(struct smsc_ircc_cb *self);
 215 static void smsc_ircc_probe_transceiver(struct smsc_ircc_cb *self);
 216 static void smsc_ircc_set_transceiver_for_speed(struct smsc_ircc_cb *self, u32 speed);
 217 static void smsc_ircc_sir_wait_hw_transmitter_finish(struct smsc_ircc_cb *self);
 218
 219 /* Probing */
 220 static int __init smsc_ircc_look_for_chips(void);
 221 static const struct smsc_chip * __init smsc_ircc_probe(unsigned short cfg_base, u8 reg, const struct smsc_chip *chip, char *type);
 222 static int __init smsc_superio_flat(const struct smsc_chip *chips, unsigned short cfg_base, char *type);
 223 static int __init smsc_superio_paged(const struct smsc_chip *chips, unsigned short cfg_base, char *type);
 224 static int __init smsc_superio_fdc(unsigned short cfg_base);
 225 static int __init smsc_superio_lpc(unsigned short cfg_base);
 226 #ifdef CONFIG_PCI
 227 static int __init preconfigure_smsc_chip(struct smsc_ircc_subsystem_configuration *conf);
 228 static int __init preconfigure_through_82801(struct pci_dev *dev, struct smsc_ircc_subsystem_configuration *conf);
 229 static void __init preconfigure_ali_port(struct pci_dev *dev,
 230                                          unsigned short port);
 231 static int __init preconfigure_through_ali(struct pci_dev *dev, struct smsc_ircc_subsystem_configuration *conf);
 232 static int __init smsc_ircc_preconfigure_subsystems(unsigned short ircc_cfg,
 233                                                     unsigned short ircc_fir,
 234                                                     unsigned short ircc_sir,
 235                                                     unsigned char ircc_dma,
 236                                                     unsigned char ircc_irq);
 237 #endif
 238
 239 /* Transceivers specific functions */
 240
 241 static void smsc_ircc_set_transceiver_toshiba_sat1800(int fir_base, u32 speed);
 242 static int  smsc_ircc_probe_transceiver_toshiba_sat1800(int fir_base);
 243 static void smsc_ircc_set_transceiver_smsc_ircc_fast_pin_select(int fir_base, u32 speed);
 244 static int  smsc_ircc_probe_transceiver_smsc_ircc_fast_pin_select(int fir_base);
 245 static void smsc_ircc_set_transceiver_smsc_ircc_atc(int fir_base, u32 speed);
 246 static int  smsc_ircc_probe_transceiver_smsc_ircc_atc(int fir_base);
 247
 248 /* Power Management */
 249
 250 static int smsc_ircc_suspend(struct platform_device *dev, pm_message_t state);
 251 static int smsc_ircc_resume(struct platform_device *dev);
 252
 253 static struct platform_driver smsc_ircc_driver = {
 254         .suspend        = smsc_ircc_suspend,
 255         .resume         = smsc_ircc_resume,
 256         .driver         = {
 257                 .name   = SMSC_IRCC2_DRIVER_NAME,
 258         },
 259 };
 260
 261 /* Transceivers for SMSC-ircc */
 262
 263 static struct smsc_transceiver smsc_transceivers[] =
 264 {
 265         { "Toshiba Satellite 1800 (GP data pin select)", smsc_ircc_set_transceiver_toshiba_sat1800, smsc_ircc_probe_transceiver_toshiba_sat1800 },
 266         { "Fast pin select", smsc_ircc_set_transceiver_smsc_ircc_fast_pin_select, smsc_ircc_probe_transceiver_smsc_ircc_fast_pin_select },
 267         { "ATC IRMode", smsc_ircc_set_transceiver_smsc_ircc_atc, smsc_ircc_probe_transceiver_smsc_ircc_atc },
 268         { NULL, NULL }
 269 };
 270 #define SMSC_IRCC2_C_NUMBER_OF_TRANSCEIVERS (ARRAY_SIZE(smsc_transceivers) - 1)
 271
 272 /*  SMC SuperIO chipsets definitions */
 273
 274 #define KEY55_1 0       /* SuperIO Configuration mode with Key <0x55> */
 275 #define KEY55_2 1       /* SuperIO Configuration mode with Key <0x55,0x55> */
 276 #define NoIRDA  2       /* SuperIO Chip has no IRDA Port */
 277 #define SIR     0       /* SuperIO Chip has only slow IRDA */
 278 #define FIR     4       /* SuperIO Chip has fast IRDA */
 279 #define SERx4   8       /* SuperIO Chip supports 115,2 KBaud * 4=460,8 KBaud */
 280
 281 static struct smsc_chip __initdata fdc_chips_flat[] =
 282 {
 283         /* Base address 0x3f0 or 0x370 */
 284         { "37C44",      KEY55_1|NoIRDA,         0x00, 0x00 }, /* This chip cannot be detected */
 285         { "37C665GT",   KEY55_2|NoIRDA,         0x65, 0x01 },
 286         { "37C665GT",   KEY55_2|NoIRDA,         0x66, 0x01 },
 287         { "37C669",     KEY55_2|SIR|SERx4,      0x03, 0x02 },
 288         { "37C669",     KEY55_2|SIR|SERx4,      0x04, 0x02 }, /* ID? */
 289         { "37C78",      KEY55_2|NoIRDA,         0x78, 0x00 },
 290         { "37N769",     KEY55_1|FIR|SERx4,      0x28, 0x00 },
 291         { "37N869",     KEY55_1|FIR|SERx4,      0x29, 0x00 },
 292         { NULL }
 293 };
 294
 295 static struct smsc_chip __initdata fdc_chips_paged[] =
 296 {
 297         /* Base address 0x3f0 or 0x370 */
 298         { "37B72X",     KEY55_1|SIR|SERx4,      0x4c, 0x00 },
 299         { "37B77X",     KEY55_1|SIR|SERx4,      0x43, 0x00 },
 300         { "37B78X",     KEY55_1|SIR|SERx4,      0x44, 0x00 },
 301         { "37B80X",     KEY55_1|SIR|SERx4,      0x42, 0x00 },
 302         { "37C67X",     KEY55_1|FIR|SERx4,      0x40, 0x00 },
 303         { "37C93X",     KEY55_2|SIR|SERx4,      0x02, 0x01 },
 304         { "37C93XAPM",  KEY55_1|SIR|SERx4,      0x30, 0x01 },
 305         { "37C93XFR",   KEY55_2|FIR|SERx4,      0x03, 0x01 },
 306         { "37M707",     KEY55_1|SIR|SERx4,      0x42, 0x00 },
 307         { "37M81X",     KEY55_1|SIR|SERx4,      0x4d, 0x00 },
 308         { "37N958FR",   KEY55_1|FIR|SERx4,      0x09, 0x04 },
 309         { "37N971",     KEY55_1|FIR|SERx4,      0x0a, 0x00 },
 310         { "37N972",     KEY55_1|FIR|SERx4,      0x0b, 0x00 },
 311         { NULL }
 312 };
 313
 314 static struct smsc_chip __initdata lpc_chips_flat[] =
 315 {
 316         /* Base address 0x2E or 0x4E */
 317         { "47N227",     KEY55_1|FIR|SERx4,      0x5a, 0x00 },
 318         { "47N267",     KEY55_1|FIR|SERx4,      0x5e, 0x00 },
 319         { NULL }
 320 };
 321
 322 static struct smsc_chip __initdata lpc_chips_paged[] =
 323 {
 324         /* Base address 0x2E or 0x4E */
 325         { "47B27X",     KEY55_1|SIR|SERx4,      0x51, 0x00 },
 326         { "47B37X",     KEY55_1|SIR|SERx4,      0x52, 0x00 },
 327         { "47M10X",     KEY55_1|SIR|SERx4,      0x59, 0x00 },
 328         { "47M120",     KEY55_1|NoIRDA|SERx4,   0x5c, 0x00 },
 329         { "47M13X",     KEY55_1|SIR|SERx4,      0x59, 0x00 },
 330         { "47M14X",     KEY55_1|SIR|SERx4,      0x5f, 0x00 },
 331         { "47N252",     KEY55_1|FIR|SERx4,      0x0e, 0x00 },
 332         { "47S42X",     KEY55_1|SIR|SERx4,      0x57, 0x00 },
 333         { NULL }
 334 };
 335
 336 #define SMSCSIO_TYPE_FDC        1
 337 #define SMSCSIO_TYPE_LPC        2
 338 #define SMSCSIO_TYPE_FLAT       4
 339 #define SMSCSIO_TYPE_PAGED      8
 340
 341 static struct smsc_chip_address __initdata possible_addresses[] =
 342 {
 343         { 0x3f0, SMSCSIO_TYPE_FDC|SMSCSIO_TYPE_FLAT|SMSCSIO_TYPE_PAGED },
 344         { 0x370, SMSCSIO_TYPE_FDC|SMSCSIO_TYPE_FLAT|SMSCSIO_TYPE_PAGED },
 345         { 0xe0,  SMSCSIO_TYPE_FDC|SMSCSIO_TYPE_FLAT|SMSCSIO_TYPE_PAGED },
 346         { 0x2e,  SMSCSIO_TYPE_LPC|SMSCSIO_TYPE_FLAT|SMSCSIO_TYPE_PAGED },
 347         { 0x4e,  SMSCSIO_TYPE_LPC|SMSCSIO_TYPE_FLAT|SMSCSIO_TYPE_PAGED },
 348         { 0, 0 }
 349 };
 350
 351 /* Globals */
 352
 353 static struct smsc_ircc_cb *dev_self[] = { NULL, NULL };
 354 static unsigned short dev_count;
 355
 356 static inline void register_bank(int iobase, int bank)
 357 {
 358         outb(((inb(iobase + IRCC_MASTER) & 0xf0) | (bank & 0x07)),
 359                iobase + IRCC_MASTER);
 360 }
 361
 362 #ifdef  CONFIG_PNP
 363 /* PNP hotplug support */
 364 static const struct pnp_device_id smsc_ircc_pnp_table[] = {
 365         { .id = "SMCf010", .driver_data = 0 },
 366         /* and presumably others */
 367         { }
 368 };
 369 MODULE_DEVICE_TABLE(pnp, smsc_ircc_pnp_table);
 370 #endif
 371
 372
 373 /*******************************************************************************
 374  *
 375  *
 376  * SMSC-ircc stuff
 377  *
 378  *
 379  *******************************************************************************/
 380
 381 /*
 382  * Function smsc_ircc_init ()
 383  *
 384  *    Initialize chip. Just try to find out how many chips we are dealing with
 385  *    and where they are
 386  */
 387 static int __init smsc_ircc_init(void)
 388 {
 389         int ret;
 390
 391         IRDA_DEBUG(1, "%s\n", __FUNCTION__);
 392
 393         ret = platform_driver_register(&smsc_ircc_driver);
 394         if (ret) {
 395                 IRDA_ERROR("%s, Can't register driver!\n", driver_name);
 396                 return ret;
 397         }
 398
 399 #ifdef CONFIG_PCI
 400         if (smsc_ircc_preconfigure_subsystems(ircc_cfg, ircc_fir, ircc_sir, ircc_dma, ircc_irq) < 0) {
 401                 /* Ignore errors from preconfiguration */
 402                 IRDA_ERROR("%s, Preconfiguration failed !\n", driver_name);
 403         }
 404 #endif
 405
 406         dev_count = 0;
 407
 408         if (ircc_fir > 0 && ircc_sir > 0) {
 409                 IRDA_MESSAGE(" Overriding FIR address 0x%04x\n", ircc_fir);
 410                 IRDA_MESSAGE(" Overriding SIR address 0x%04x\n", ircc_sir);
 411
 412                 if (smsc_ircc_open(ircc_fir, ircc_sir, ircc_dma, ircc_irq))
 413                         ret = -ENODEV;
 414         } else {
 415                 ret = -ENODEV;
 416
 417                 /* try user provided configuration register base address */
 418                 if (ircc_cfg > 0) {
 419                         IRDA_MESSAGE(" Overriding configuration address "
 420                                      "0x%04x\n", ircc_cfg);
 421                         if (!smsc_superio_fdc(ircc_cfg))
 422                                 ret = 0;
 423                         if (!smsc_superio_lpc(ircc_cfg))
 424                                 ret = 0;
 425                 }
 426
 427                 if (smsc_ircc_look_for_chips() > 0)
 428                         ret = 0;
 429         }
 430
 431         if (ret)
 432                 platform_driver_unregister(&smsc_ircc_driver);
 433
 434         return ret;
 435 }
 436
 437 /*
 438  * Function smsc_ircc_open (firbase, sirbase, dma, irq)
 439  *
 440  *    Try to open driver instance
 441  *
 442  */
 443 static int __init smsc_ircc_open(unsigned int fir_base, unsigned int sir_base, u8 dma, u8 irq)
 444 {
 445         struct smsc_ircc_cb *self;
 446         struct net_device *dev;
 447         int err;
 448
 449         IRDA_DEBUG(1, "%s\n", __FUNCTION__);
 450
 451         err = smsc_ircc_present(fir_base, sir_base);
 452         if (err)
 453                 goto err_out;
 454
 455         err = -ENOMEM;
 456         if (dev_count >= ARRAY_SIZE(dev_self)) {
 457                 IRDA_WARNING("%s(), too many devices!\n", __FUNCTION__);
 458                 goto err_out1;
 459         }
 460
 461         /*
 462          *  Allocate new instance of the driver
 463          */
 464         dev = alloc_irdadev(sizeof(struct smsc_ircc_cb));
 465         if (!dev) {
 466                 IRDA_WARNING("%s() can't allocate net device\n", __FUNCTION__);
 467                 goto err_out1;
 468         }
 469
 470         SET_MODULE_OWNER(dev);
 471
 472         dev->hard_start_xmit = smsc_ircc_hard_xmit_sir;
 473 #if SMSC_IRCC2_C_NET_TIMEOUT
 474         dev->tx_timeout      = smsc_ircc_timeout;
 475         dev->watchdog_timeo  = HZ * 2;  /* Allow enough time for speed change */
 476 #endif
 477         dev->open            = smsc_ircc_net_open;
 478         dev->stop            = smsc_ircc_net_close;
 479         dev->do_ioctl        = smsc_ircc_net_ioctl;
 480         dev->get_stats       = smsc_ircc_net_get_stats;
 481
 482         self = netdev_priv(dev);
 483         self->netdev = dev;
 484
 485         /* Make ifconfig display some details */
 486         dev->base_addr = self->io.fir_base = fir_base;
 487         dev->irq = self->io.irq = irq;
 488
 489         /* Need to store self somewhere */
 490         dev_self[dev_count] = self;
 491         spin_lock_init(&self->lock);
 492
 493         self->rx_buff.truesize = SMSC_IRCC2_RX_BUFF_TRUESIZE;
 494         self->tx_buff.truesize = SMSC_IRCC2_TX_BUFF_TRUESIZE;
 495
 496         self->rx_buff.head =
 497                 dma_alloc_coherent(NULL, self->rx_buff.truesize,
 498                                    &self->rx_buff_dma, GFP_KERNEL);
 499         if (self->rx_buff.head == NULL) {
 500                 IRDA_ERROR("%s, Can't allocate memory for receive buffer!\n",
 501                            driver_name);
 502                 goto err_out2;
 503         }
 504
 505         self->tx_buff.head =
 506                 dma_alloc_coherent(NULL, self->tx_buff.truesize,
 507                                    &self->tx_buff_dma, GFP_KERNEL);
 508         if (self->tx_buff.head == NULL) {
 509                 IRDA_ERROR("%s, Can't allocate memory for transmit buffer!\n",
 510                            driver_name);
 511                 goto err_out3;
 512         }
 513
 514         memset(self->rx_buff.head, 0, self->rx_buff.truesize);
 515         memset(self->tx_buff.head, 0, self->tx_buff.truesize);
 516
 517         self->rx_buff.in_frame = FALSE;
 518         self->rx_buff.state = OUTSIDE_FRAME;
 519         self->tx_buff.data = self->tx_buff.head;
 520         self->rx_buff.data = self->rx_buff.head;
 521
 522         smsc_ircc_setup_io(self, fir_base, sir_base, dma, irq);
 523         smsc_ircc_setup_qos(self);
 524         smsc_ircc_init_chip(self);
 525
 526         if (ircc_transceiver > 0  &&
 527             ircc_transceiver < SMSC_IRCC2_C_NUMBER_OF_TRANSCEIVERS)
 528                 self->transceiver = ircc_transceiver;
 529         else
 530                 smsc_ircc_probe_transceiver(self);
 531
 532         err = register_netdev(self->netdev);
 533         if (err) {
 534                 IRDA_ERROR("%s, Network device registration failed!\n",
 535                            driver_name);
 536                 goto err_out4;
 537         }
 538
 539         self->pldev = platform_device_register_simple(SMSC_IRCC2_DRIVER_NAME,
 540                                                       dev_count, NULL, 0);
 541         if (IS_ERR(self->pldev)) {
 542                 err = PTR_ERR(self->pldev);
 543                 goto err_out5;
 544         }
 545         platform_set_drvdata(self->pldev, self);
 546
 547         IRDA_MESSAGE("IrDA: Registered device %s\n", dev->name);
 548         dev_count++;
 549
 550         return 0;
 551
 552  err_out5:
 553         unregister_netdev(self->netdev);
 554
 555  err_out4:
 556         dma_free_coherent(NULL, self->tx_buff.truesize,
 557                           self->tx_buff.head, self->tx_buff_dma);
 558  err_out3:
 559         dma_free_coherent(NULL, self->rx_buff.truesize,
 560                           self->rx_buff.head, self->rx_buff_dma);
 561  err_out2:
 562         free_netdev(self->netdev);
 563         dev_self[dev_count] = NULL;
 564  err_out1:
 565         release_region(fir_base, SMSC_IRCC2_FIR_CHIP_IO_EXTENT);
 566         release_region(sir_base, SMSC_IRCC2_SIR_CHIP_IO_EXTENT);
 567  err_out:
 568         return err;
 569 }
 570
 571 /*
 572  * Function smsc_ircc_present(fir_base, sir_base)
 573  *
 574  *    Check the smsc-ircc chip presence
 575  *
 576  */
 577 static int smsc_ircc_present(unsigned int fir_base, unsigned int sir_base)
 578 {
 579         unsigned char low, high, chip, config, dma, irq, version;
 580
 581         if (!request_region(fir_base, SMSC_IRCC2_FIR_CHIP_IO_EXTENT,
 582                             driver_name)) {
 583                 IRDA_WARNING("%s: can't get fir_base of 0x%03x\n",
 584                              __FUNCTION__, fir_base);
 585                 goto out1;
 586         }
 587
 588         if (!request_region(sir_base, SMSC_IRCC2_SIR_CHIP_IO_EXTENT,
 589                             driver_name)) {
 590                 IRDA_WARNING("%s: can't get sir_base of 0x%03x\n",
 591                              __FUNCTION__, sir_base);
 592                 goto out2;
 593         }
 594
 595         register_bank(fir_base, 3);
 596
 597         high    = inb(fir_base + IRCC_ID_HIGH);
 598         low     = inb(fir_base + IRCC_ID_LOW);
 599         chip    = inb(fir_base + IRCC_CHIP_ID);
 600         version = inb(fir_base + IRCC_VERSION);
 601         config  = inb(fir_base + IRCC_INTERFACE);
 602         dma     = config & IRCC_INTERFACE_DMA_MASK;
 603         irq     = (config & IRCC_INTERFACE_IRQ_MASK) >> 4;
 604
 605         if (high != 0x10 || low != 0xb8 || (chip != 0xf1 && chip != 0xf2)) {
 606                 IRDA_WARNING("%s(), addr 0x%04x - no device found!\n",
 607                              __FUNCTION__, fir_base);
 608                 goto out3;
 609         }
 610         IRDA_MESSAGE("SMsC IrDA Controller found\n IrCC version %d.%d, "
 611                      "firport 0x%03x, sirport 0x%03x dma=%d, irq=%d\n",
 612                      chip & 0x0f, version, fir_base, sir_base, dma, irq);
 613
 614         return 0;
 615
 616  out3:
 617         release_region(sir_base, SMSC_IRCC2_SIR_CHIP_IO_EXTENT);
 618  out2:
 619         release_region(fir_base, SMSC_IRCC2_FIR_CHIP_IO_EXTENT);
 620  out1:
 621         return -ENODEV;
 622 }
 623
 624 /*
 625  * Function smsc_ircc_setup_io(self, fir_base, sir_base, dma, irq)
 626  *
 627  *    Setup I/O
 628  *
 629  */
 630 static void smsc_ircc_setup_io(struct smsc_ircc_cb *self,
 631                                unsigned int fir_base, unsigned int sir_base,
 632                                u8 dma, u8 irq)
 633 {
 634         unsigned char config, chip_dma, chip_irq;
 635
 636         register_bank(fir_base, 3);
 637         config = inb(fir_base + IRCC_INTERFACE);
 638         chip_dma = config & IRCC_INTERFACE_DMA_MASK;
 639         chip_irq = (config & IRCC_INTERFACE_IRQ_MASK) >> 4;
 640
 641         self->io.fir_base  = fir_base;
 642         self->io.sir_base  = sir_base;
 643         self->io.fir_ext   = SMSC_IRCC2_FIR_CHIP_IO_EXTENT;
 644         self->io.sir_ext   = SMSC_IRCC2_SIR_CHIP_IO_EXTENT;
 645         self->io.fifo_size = SMSC_IRCC2_FIFO_SIZE;
 646         self->io.speed = SMSC_IRCC2_C_IRDA_FALLBACK_SPEED;
 647
 648         if (irq < 255) {
 649                 if (irq != chip_irq)
 650                         IRDA_MESSAGE("%s, Overriding IRQ - chip says %d, using %d\n",
 651                                      driver_name, chip_irq, irq);
 652                 self->io.irq = irq;
 653         } else
 654                 self->io.irq = chip_irq;
 655
 656         if (dma < 255) {
 657                 if (dma != chip_dma)
 658                         IRDA_MESSAGE("%s, Overriding DMA - chip says %d, using %d\n",
 659                                      driver_name, chip_dma, dma);
 660                 self->io.dma = dma;
 661         } else
 662                 self->io.dma = chip_dma;
 663
 664 }
 665
 666 /*
 667  * Function smsc_ircc_setup_qos(self)
 668  *
 669  *    Setup qos
 670  *
 671  */
 672 static void smsc_ircc_setup_qos(struct smsc_ircc_cb *self)
 673 {
 674         /* Initialize QoS for this device */
 675         irda_init_max_qos_capabilies(&self->qos);
 676
 677         self->qos.baud_rate.bits = IR_9600|IR_19200|IR_38400|IR_57600|
 678                 IR_115200|IR_576000|IR_1152000|(IR_4000000 << 8);
 679
 680         self->qos.min_turn_time.bits = SMSC_IRCC2_MIN_TURN_TIME;
 681         self->qos.window_size.bits = SMSC_IRCC2_WINDOW_SIZE;
 682         irda_qos_bits_to_value(&self->qos);
 683 }
 684
 685 /*
 686  * Function smsc_ircc_init_chip(self)
 687  *
 688  *    Init chip
 689  *
 690  */
 691 static void smsc_ircc_init_chip(struct smsc_ircc_cb *self)
 692 {
 693         int iobase = self->io.fir_base;
 694
 695         register_bank(iobase, 0);
 696         outb(IRCC_MASTER_RESET, iobase + IRCC_MASTER);
 697         outb(0x00, iobase + IRCC_MASTER);
 698
 699         register_bank(iobase, 1);
 700         outb(((inb(iobase + IRCC_SCE_CFGA) & 0x87) | IRCC_CFGA_IRDA_SIR_A),
 701              iobase + IRCC_SCE_CFGA);
 702
 703 #ifdef smsc_669 /* Uses pin 88/89 for Rx/Tx */
 704         outb(((inb(iobase + IRCC_SCE_CFGB) & 0x3f) | IRCC_CFGB_MUX_COM),
 705              iobase + IRCC_SCE_CFGB);
 706 #else
 707         outb(((inb(iobase + IRCC_SCE_CFGB) & 0x3f) | IRCC_CFGB_MUX_IR),
 708              iobase + IRCC_SCE_CFGB);
 709 #endif
 710         (void) inb(iobase + IRCC_FIFO_THRESHOLD);
 711         outb(SMSC_IRCC2_FIFO_THRESHOLD, iobase + IRCC_FIFO_THRESHOLD);
 712
 713         register_bank(iobase, 4);
 714         outb((inb(iobase + IRCC_CONTROL) & 0x30), iobase + IRCC_CONTROL);
 715
 716         register_bank(iobase, 0);
 717         outb(0, iobase + IRCC_LCR_A);
 718
 719         smsc_ircc_set_sir_speed(self, SMSC_IRCC2_C_IRDA_FALLBACK_SPEED);
 720
 721         /* Power on device */
 722         outb(0x00, iobase + IRCC_MASTER);
 723 }
 724
 725 /*
 726  * Function smsc_ircc_net_ioctl (dev, rq, cmd)
 727  *
 728  *    Process IOCTL commands for this device
 729  *
 730  */
 731 static int smsc_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 732 {
 733         struct if_irda_req *irq = (struct if_irda_req *) rq;
 734         struct smsc_ircc_cb *self;
 735         unsigned long flags;
 736         int ret = 0;
 737
 738         IRDA_ASSERT(dev != NULL, return -1;);
 739
 740         self = netdev_priv(dev);
 741
 742         IRDA_ASSERT(self != NULL, return -1;);
 743
 744         IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __FUNCTION__, dev->name, cmd);
 745
 746         switch (cmd) {
 747         case SIOCSBANDWIDTH: /* Set bandwidth */
 748                 if (!capable(CAP_NET_ADMIN))
 749                         ret = -EPERM;
 750                 else {
 751                         /* Make sure we are the only one touching
 752                          * self->io.speed and the hardware - Jean II */
 753                         spin_lock_irqsave(&self->lock, flags);
 754                         smsc_ircc_change_speed(self, irq->ifr_baudrate);
 755                         spin_unlock_irqrestore(&self->lock, flags);
 756                 }
 757                 break;
 758         case SIOCSMEDIABUSY: /* Set media busy */
 759                 if (!capable(CAP_NET_ADMIN)) {
 760                         ret = -EPERM;
 761                         break;
 762                 }
 763
 764                 irda_device_set_media_busy(self->netdev, TRUE);
 765                 break;
 766         case SIOCGRECEIVING: /* Check if we are receiving right now */
 767                 irq->ifr_receiving = smsc_ircc_is_receiving(self);
 768                 break;
 769         #if 0
 770         case SIOCSDTRRTS:
 771                 if (!capable(CAP_NET_ADMIN)) {
 772                         ret = -EPERM;
 773                         break;
 774                 }
 775                 smsc_ircc_sir_set_dtr_rts(dev, irq->ifr_dtr, irq->ifr_rts);
 776                 break;
 777         #endif
 778         default:
 779                 ret = -EOPNOTSUPP;
 780         }
 781
 782         return ret;
 783 }
 784
 785 static struct net_device_stats *smsc_ircc_net_get_stats(struct net_device *dev)
 786 {
 787         struct smsc_ircc_cb *self = netdev_priv(dev);
 788
 789         return &self->stats;
 790 }
 791
 792 #if SMSC_IRCC2_C_NET_TIMEOUT
 793 /*
 794  * Function smsc_ircc_timeout (struct net_device *dev)
 795  *
 796  *    The networking timeout management.
 797  *
 798  */
 799
 800 static void smsc_ircc_timeout(struct net_device *dev)
 801 {
 802         struct smsc_ircc_cb *self = netdev_priv(dev);
 803         unsigned long flags;
 804
 805         IRDA_WARNING("%s: transmit timed out, changing speed to: %d\n",
 806                      dev->name, self->io.speed);
 807         spin_lock_irqsave(&self->lock, flags);
 808         smsc_ircc_sir_start(self);
 809         smsc_ircc_change_speed(self, self->io.speed);
 810         dev->trans_start = jiffies;
 811         netif_wake_queue(dev);
 812         spin_unlock_irqrestore(&self->lock, flags);
 813 }
 814 #endif
 815
 816 /*
 817  * Function smsc_ircc_hard_xmit_sir (struct sk_buff *skb, struct net_device *dev)
 818  *
 819  *    Transmits the current frame until FIFO is full, then
 820  *    waits until the next transmit interrupt, and continues until the
 821  *    frame is transmitted.
 822  */
 823 int smsc_ircc_hard_xmit_sir(struct sk_buff *skb, struct net_device *dev)
 824 {
 825         struct smsc_ircc_cb *self;
 826         unsigned long flags;
 827         s32 speed;
 828
 829         IRDA_DEBUG(1, "%s\n", __FUNCTION__);
 830
 831         IRDA_ASSERT(dev != NULL, return 0;);
 832
 833         self = netdev_priv(dev);
 834         IRDA_ASSERT(self != NULL, return 0;);
 835
 836         netif_stop_queue(dev);
 837
 838         /* Make sure test of self->io.speed & speed change are atomic */
 839         spin_lock_irqsave(&self->lock, flags);
 840
 841         /* Check if we need to change the speed */
 842         speed = irda_get_next_speed(skb);
 843         if (speed != self->io.speed && speed != -1) {
 844                 /* Check for empty frame */
 845                 if (!skb->len) {
 846                         /*
 847                          * We send frames one by one in SIR mode (no
 848                          * pipelining), so at this point, if we were sending
 849                          * a previous frame, we just received the interrupt
 850                          * telling us it is finished (UART_IIR_THRI).
 851                          * Therefore, waiting for the transmitter to really
 852                          * finish draining the fifo won't take too long.
 853                          * And the interrupt handler is not expected to run.
 854                          * - Jean II */
 855                         smsc_ircc_sir_wait_hw_transmitter_finish(self);
 856                         smsc_ircc_change_speed(self, speed);
 857                         spin_unlock_irqrestore(&self->lock, flags);
 858                         dev_kfree_skb(skb);
 859                         return 0;
 860                 }
 861                 self->new_speed = speed;
 862         }
 863
 864         /* Init tx buffer */
 865         self->tx_buff.data = self->tx_buff.head;
 866
 867         /* Copy skb to tx_buff while wrapping, stuffing and making CRC */
 868         self->tx_buff.len = async_wrap_skb(skb, self->tx_buff.data,
 869                                            self->tx_buff.truesize);
 870
 871         self->stats.tx_bytes += self->tx_buff.len;
 872
 873         /* Turn on transmit finished interrupt. Will fire immediately!  */
 874         outb(UART_IER_THRI, self->io.sir_base + UART_IER);
 875
 876         spin_unlock_irqrestore(&self->lock, flags);
 877
 878         dev_kfree_skb(skb);
 879
 880         return 0;
 881 }
 882
 883 /*
 884  * Function smsc_ircc_set_fir_speed (self, baud)
 885  *
 886  *    Change the speed of the device
 887  *
 888  */
 889 static void smsc_ircc_set_fir_speed(struct smsc_ircc_cb *self, u32 speed)
 890 {
 891         int fir_base, ir_mode, ctrl, fast;
 892
 893         IRDA_ASSERT(self != NULL, return;);
 894         fir_base = self->io.fir_base;
 895
 896         self->io.speed = speed;
 897
 898         switch (speed) {
 899         default:
 900         case 576000:
 901                 ir_mode = IRCC_CFGA_IRDA_HDLC;
 902                 ctrl = IRCC_CRC;
 903                 fast = 0;
 904                 IRDA_DEBUG(0, "%s(), handling baud of 576000\n", __FUNCTION__);
 905                 break;
 906         case 1152000:
 907                 ir_mode = IRCC_CFGA_IRDA_HDLC;
 908                 ctrl = IRCC_1152 | IRCC_CRC;
 909                 fast = IRCC_LCR_A_FAST | IRCC_LCR_A_GP_DATA;
 910                 IRDA_DEBUG(0, "%s(), handling baud of 1152000\n",
 911                            __FUNCTION__);
 912                 break;
 913         case 4000000:
 914                 ir_mode = IRCC_CFGA_IRDA_4PPM;
 915                 ctrl = IRCC_CRC;
 916                 fast = IRCC_LCR_A_FAST;
 917                 IRDA_DEBUG(0, "%s(), handling baud of 4000000\n",
 918                            __FUNCTION__);
 919                 break;
 920         }
 921         #if 0
 922         Now in tranceiver!
 923         /* This causes an interrupt */
 924         register_bank(fir_base, 0);
 925         outb((inb(fir_base + IRCC_LCR_A) &  0xbf) | fast, fir_base + IRCC_LCR_A);
 926         #endif
 927
 928         register_bank(fir_base, 1);
 929         outb(((inb(fir_base + IRCC_SCE_CFGA) & IRCC_SCE_CFGA_BLOCK_CTRL_BITS_MASK) | ir_mode), fir_base + IRCC_SCE_CFGA);
 930
 931         register_bank(fir_base, 4);
 932         outb((inb(fir_base + IRCC_CONTROL) & 0x30) | ctrl, fir_base + IRCC_CONTROL);
 933 }
 934
 935 /*
 936  * Function smsc_ircc_fir_start(self)
 937  *
 938  *    Change the speed of the device
 939  *
 940  */
 941 static void smsc_ircc_fir_start(struct smsc_ircc_cb *self)
 942 {
 943         struct net_device *dev;
 944         int fir_base;
 945
 946         IRDA_DEBUG(1, "%s\n", __FUNCTION__);
 947
 948         IRDA_ASSERT(self != NULL, return;);
 949         dev = self->netdev;
 950         IRDA_ASSERT(dev != NULL, return;);
 951
 952         fir_base = self->io.fir_base;
 953
 954         /* Reset everything */
 955
 956         /* Install FIR transmit handler */
 957         dev->hard_start_xmit = smsc_ircc_hard_xmit_fir;
 958
 959         /* Clear FIFO */
 960         outb(inb(fir_base + IRCC_LCR_A) | IRCC_LCR_A_FIFO_RESET, fir_base + IRCC_LCR_A);
 961
 962         /* Enable interrupt */
 963         /*outb(IRCC_IER_ACTIVE_FRAME|IRCC_IER_EOM, fir_base + IRCC_IER);*/
 964
 965         register_bank(fir_base, 1);
 966
 967         /* Select the TX/RX interface */
 968 #ifdef SMSC_669 /* Uses pin 88/89 for Rx/Tx */
 969         outb(((inb(fir_base + IRCC_SCE_CFGB) & 0x3f) | IRCC_CFGB_MUX_COM),
 970              fir_base + IRCC_SCE_CFGB);
 971 #else
 972         outb(((inb(fir_base + IRCC_SCE_CFGB) & 0x3f) | IRCC_CFGB_MUX_IR),
 973              fir_base + IRCC_SCE_CFGB);
 974 #endif
 975         (void) inb(fir_base + IRCC_FIFO_THRESHOLD);
 976
 977         /* Enable SCE interrupts */
 978         outb(0, fir_base + IRCC_MASTER);
 979         register_bank(fir_base, 0);
 980         outb(IRCC_IER_ACTIVE_FRAME | IRCC_IER_EOM, fir_base + IRCC_IER);
 981         outb(IRCC_MASTER_INT_EN, fir_base + IRCC_MASTER);
 982 }
 983
 984 /*
 985  * Function smsc_ircc_fir_stop(self, baud)
 986  *
 987  *    Change the speed of the device
 988  *
 989  */
 990 static void smsc_ircc_fir_stop(struct smsc_ircc_cb *self)
 991 {
 992         int fir_base;
 993
 994         IRDA_DEBUG(1, "%s\n", __FUNCTION__);
 995
 996         IRDA_ASSERT(self != NULL, return;);
 997
 998         fir_base = self->io.fir_base;
 999         register_bank(fir_base, 0);
1000         /*outb(IRCC_MASTER_RESET, fir_base + IRCC_MASTER);*/
1001         outb(inb(fir_base + IRCC_LCR_B) & IRCC_LCR_B_SIP_ENABLE, fir_base + IRCC_LCR_B);
1002 }
1003
1004
1005 /*
1006  * Function smsc_ircc_change_speed(self, baud)
1007  *
1008  *    Change the speed of the device
1009  *
1010  * This function *must* be called with spinlock held, because it may
1011  * be called from the irq handler. - Jean II
1012  */
1013 static void smsc_ircc_change_speed(struct smsc_ircc_cb *self, u32 speed)
1014 {
1015         struct net_device *dev;
1016         int last_speed_was_sir;
1017
1018         IRDA_DEBUG(0, "%s() changing speed to: %d\n", __FUNCTION__, speed);
1019
1020         IRDA_ASSERT(self != NULL, return;);
1021         dev = self->netdev;
1022
1023         last_speed_was_sir = self->io.speed <= SMSC_IRCC2_MAX_SIR_SPEED;
1024
1025         #if 0
1026         /* Temp Hack */
1027         speed= 1152000;
1028         self->io.speed = speed;
1029         last_speed_was_sir = 0;
1030         smsc_ircc_fir_start(self);
1031         #endif
1032
1033         if (self->io.speed == 0)
1034                 smsc_ircc_sir_start(self);
1035
1036         #if 0
1037         if (!last_speed_was_sir) speed = self->io.speed;
1038         #endif
1039
1040         if (self->io.speed != speed)
1041                 smsc_ircc_set_transceiver_for_speed(self, speed);
1042
1043         self->io.speed = speed;
1044
1045         if (speed <= SMSC_IRCC2_MAX_SIR_SPEED) {
1046                 if (!last_speed_was_sir) {
1047                         smsc_ircc_fir_stop(self);
1048                         smsc_ircc_sir_start(self);
1049                 }
1050                 smsc_ircc_set_sir_speed(self, speed);
1051         } else {
1052                 if (last_speed_was_sir) {
1053                         #if SMSC_IRCC2_C_SIR_STOP
1054                         smsc_ircc_sir_stop(self);
1055                         #endif
1056                         smsc_ircc_fir_start(self);
1057                 }
1058                 smsc_ircc_set_fir_speed(self, speed);
1059
1060                 #if 0
1061                 self->tx_buff.len = 10;
1062                 self->tx_buff.data = self->tx_buff.head;
1063
1064                 smsc_ircc_dma_xmit(self, 4000);
1065                 #endif
1066                 /* Be ready for incoming frames */
1067                 smsc_ircc_dma_receive(self);
1068         }
1069
1070         netif_wake_queue(dev);
1071 }
1072
1073 /*
1074  * Function smsc_ircc_set_sir_speed (self, speed)
1075  *
1076  *    Set speed of IrDA port to specified baudrate
1077  *
1078  */
1079 void smsc_ircc_set_sir_speed(struct smsc_ircc_cb *self, __u32 speed)
1080 {
1081         int iobase;
1082         int fcr;    /* FIFO control reg */
1083         int lcr;    /* Line control reg */
1084         int divisor;
1085
1086         IRDA_DEBUG(0, "%s(), Setting speed to: %d\n", __FUNCTION__, speed);
1087
1088         IRDA_ASSERT(self != NULL, return;);
1089         iobase = self->io.sir_base;
1090
1091         /* Update accounting for new speed */
1092         self->io.speed = speed;
1093
1094         /* Turn off interrupts */
1095         outb(0, iobase + UART_IER);
1096
1097         divisor = SMSC_IRCC2_MAX_SIR_SPEED / speed;
1098
1099         fcr = UART_FCR_ENABLE_FIFO;
1100
1101         /*
1102          * Use trigger level 1 to avoid 3 ms. timeout delay at 9600 bps, and
1103          * almost 1,7 ms at 19200 bps. At speeds above that we can just forget
1104          * about this timeout since it will always be fast enough.
1105          */
1106         fcr |= self->io.speed < 38400 ?
1107                 UART_FCR_TRIGGER_1 : UART_FCR_TRIGGER_14;
1108
1109         /* IrDA ports use 8N1 */
1110         lcr = UART_LCR_WLEN8;
1111
1112         outb(UART_LCR_DLAB | lcr, iobase + UART_LCR); /* Set DLAB */
1113         outb(divisor & 0xff,      iobase + UART_DLL); /* Set speed */
1114         outb(divisor >> 8,        iobase + UART_DLM);
1115         outb(lcr,                 iobase + UART_LCR); /* Set 8N1 */
1116         outb(fcr,                 iobase + UART_FCR); /* Enable FIFO's */
1117
1118         /* Turn on interrups */
1119         outb(UART_IER_RLSI | UART_IER_RDI | UART_IER_THRI, iobase + UART_IER);
1120
1121         IRDA_DEBUG(2, "%s() speed changed to: %d\n", __FUNCTION__, speed);
1122 }
1123
1124
1125 /*
1126  * Function smsc_ircc_hard_xmit_fir (skb, dev)
1127  *
1128  *    Transmit the frame!
1129  *
1130  */
1131 static int smsc_ircc_hard_xmit_fir(struct sk_buff *skb, struct net_device *dev)
1132 {
1133         struct smsc_ircc_cb *self;
1134         unsigned long flags;
1135         s32 speed;
1136         int mtt;
1137
1138         IRDA_ASSERT(dev != NULL, return 0;);
1139         self = netdev_priv(dev);
1140         IRDA_ASSERT(self != NULL, return 0;);
1141
1142         netif_stop_queue(dev);
1143
1144         /* Make sure test of self->io.speed & speed change are atomic */
1145         spin_lock_irqsave(&self->lock, flags);
1146
1147         /* Check if we need to change the speed after this frame */
1148         speed = irda_get_next_speed(skb);
1149         if (speed != self->io.speed && speed != -1) {
1150                 /* Check for empty frame */
1151                 if (!skb->len) {
1152                         /* Note : you should make sure that speed changes
1153                          * are not going to corrupt any outgoing frame.
1154                          * Look at nsc-ircc for the gory details - Jean II */
1155                         smsc_ircc_change_speed(self, speed);
1156                         spin_unlock_irqrestore(&self->lock, flags);
1157                         dev_kfree_skb(skb);
1158                         return 0;
1159                 }
1160
1161                 self->new_speed = speed;
1162         }
1163
1164         memcpy(self->tx_buff.head, skb->data, skb->len);
1165
1166         self->tx_buff.len = skb->len;
1167         self->tx_buff.data = self->tx_buff.head;
1168
1169         mtt = irda_get_mtt(skb);
1170         if (mtt) {
1171                 int bofs;
1172
1173                 /*
1174                  * Compute how many BOFs (STA or PA's) we need to waste the
1175                  * min turn time given the speed of the link.
1176                  */
1177                 bofs = mtt * (self->io.speed / 1000) / 8000;
1178                 if (bofs > 4095)
1179                         bofs = 4095;
1180
1181                 smsc_ircc_dma_xmit(self, bofs);
1182         } else {
1183                 /* Transmit frame */
1184                 smsc_ircc_dma_xmit(self, 0);
1185         }
1186
1187         spin_unlock_irqrestore(&self->lock, flags);
1188         dev_kfree_skb(skb);
1189
1190         return 0;
1191 }
1192
1193 /*
1194  * Function smsc_ircc_dma_xmit (self, bofs)
1195  *
1196  *    Transmit data using DMA
1197  *
1198  */
1199 static void smsc_ircc_dma_xmit(struct smsc_ircc_cb *self, int bofs)
1200 {
1201         int iobase = self->io.fir_base;
1202         u8 ctrl;
1203
1204         IRDA_DEBUG(3, "%s\n", __FUNCTION__);
1205 #if 1
1206         /* Disable Rx */
1207         register_bank(iobase, 0);
1208         outb(0x00, iobase + IRCC_LCR_B);
1209 #endif
1210         register_bank(iobase, 1);
1211         outb(inb(iobase + IRCC_SCE_CFGB) & ~IRCC_CFGB_DMA_ENABLE,
1212              iobase + IRCC_SCE_CFGB);
1213
1214         self->io.direction = IO_XMIT;
1215
1216         /* Set BOF additional count for generating the min turn time */
1217         register_bank(iobase, 4);
1218         outb(bofs & 0xff, iobase + IRCC_BOF_COUNT_LO);
1219         ctrl = inb(iobase + IRCC_CONTROL) & 0xf0;
1220         outb(ctrl | ((bofs >> 8) & 0x0f), iobase + IRCC_BOF_COUNT_HI);
1221
1222         /* Set max Tx frame size */
1223         outb(self->tx_buff.len >> 8, iobase + IRCC_TX_SIZE_HI);
1224         outb(self->tx_buff.len & 0xff, iobase + IRCC_TX_SIZE_LO);
1225
1226         /*outb(UART_MCR_OUT2, self->io.sir_base + UART_MCR);*/
1227
1228         /* Enable burst mode chip Tx DMA */
1229         register_bank(iobase, 1);
1230         outb(inb(iobase + IRCC_SCE_CFGB) | IRCC_CFGB_DMA_ENABLE |
1231              IRCC_CFGB_DMA_BURST, iobase + IRCC_SCE_CFGB);
1232
1233         /* Setup DMA controller (must be done after enabling chip DMA) */
1234         irda_setup_dma(self->io.dma, self->tx_buff_dma, self->tx_buff.len,
1235                        DMA_TX_MODE);
1236
1237         /* Enable interrupt */
1238
1239         register_bank(iobase, 0);
1240         outb(IRCC_IER_ACTIVE_FRAME | IRCC_IER_EOM, iobase + IRCC_IER);
1241         outb(IRCC_MASTER_INT_EN, iobase + IRCC_MASTER);
1242
1243         /* Enable transmit */
1244         outb(IRCC_LCR_B_SCE_TRANSMIT | IRCC_LCR_B_SIP_ENABLE, iobase + IRCC_LCR_B);
1245 }
1246
1247 /*
1248  * Function smsc_ircc_dma_xmit_complete (self)
1249  *
1250  *    The transfer of a frame in finished. This function will only be called
1251  *    by the interrupt handler
1252  *
1253  */
1254 static void smsc_ircc_dma_xmit_complete(struct smsc_ircc_cb *self)
1255 {
1256         int iobase = self->io.fir_base;
1257
1258         IRDA_DEBUG(3, "%s\n", __FUNCTION__);
1259 #if 0
1260         /* Disable Tx */
1261         register_bank(iobase, 0);
1262         outb(0x00, iobase + IRCC_LCR_B);
1263 #endif
1264         register_bank(iobase, 1);
1265         outb(inb(iobase + IRCC_SCE_CFGB) & ~IRCC_CFGB_DMA_ENABLE,
1266              iobase + IRCC_SCE_CFGB);
1267
1268         /* Check for underrun! */
1269         register_bank(iobase, 0);
1270         if (inb(iobase + IRCC_LSR) & IRCC_LSR_UNDERRUN) {
1271                 self->stats.tx_errors++;
1272                 self->stats.tx_fifo_errors++;
1273
1274                 /* Reset error condition */
1275                 register_bank(iobase, 0);
1276                 outb(IRCC_MASTER_ERROR_RESET, iobase + IRCC_MASTER);
1277                 outb(0x00, iobase + IRCC_MASTER);
1278         } else {
1279                 self->stats.tx_packets++;
1280                 self->stats.tx_bytes += self->tx_buff.len;
1281         }
1282
1283         /* Check if it's time to change the speed */
1284         if (self->new_speed) {
1285                 smsc_ircc_change_speed(self, self->new_speed);
1286                 self->new_speed = 0;
1287         }
1288
1289         netif_wake_queue(self->netdev);
1290 }
1291
1292 /*
1293  * Function smsc_ircc_dma_receive(self)
1294  *
1295  *    Get ready for receiving a frame. The device will initiate a DMA
1296  *    if it starts to receive a frame.
1297  *
1298  */
1299 static int smsc_ircc_dma_receive(struct smsc_ircc_cb *self)
1300 {
1301         int iobase = self->io.fir_base;
1302 #if 0
1303         /* Turn off chip DMA */
1304         register_bank(iobase, 1);
1305         outb(inb(iobase + IRCC_SCE_CFGB) & ~IRCC_CFGB_DMA_ENABLE,
1306              iobase + IRCC_SCE_CFGB);
1307 #endif
1308
1309         /* Disable Tx */
1310         register_bank(iobase, 0);
1311         outb(0x00, iobase + IRCC_LCR_B);
1312
1313         /* Turn off chip DMA */
1314         register_bank(iobase, 1);
1315         outb(inb(iobase + IRCC_SCE_CFGB) & ~IRCC_CFGB_DMA_ENABLE,
1316              iobase + IRCC_SCE_CFGB);
1317
1318         self->io.direction = IO_RECV;
1319         self->rx_buff.data = self->rx_buff.head;
1320
1321         /* Set max Rx frame size */
1322         register_bank(iobase, 4);
1323         outb((2050 >> 8) & 0x0f, iobase + IRCC_RX_SIZE_HI);
1324         outb(2050 & 0xff, iobase + IRCC_RX_SIZE_LO);
1325
1326         /* Setup DMA controller */
1327         irda_setup_dma(self->io.dma, self->rx_buff_dma, self->rx_buff.truesize,
1328                        DMA_RX_MODE);
1329
1330         /* Enable burst mode chip Rx DMA */
1331         register_bank(iobase, 1);
1332         outb(inb(iobase + IRCC_SCE_CFGB) | IRCC_CFGB_DMA_ENABLE |
1333              IRCC_CFGB_DMA_BURST, iobase + IRCC_SCE_CFGB);
1334
1335         /* Enable interrupt */
1336         register_bank(iobase, 0);
1337         outb(IRCC_IER_ACTIVE_FRAME | IRCC_IER_EOM, iobase + IRCC_IER);
1338         outb(IRCC_MASTER_INT_EN, iobase + IRCC_MASTER);
1339
1340         /* Enable receiver */
1341         register_bank(iobase, 0);
1342         outb(IRCC_LCR_B_SCE_RECEIVE | IRCC_LCR_B_SIP_ENABLE,
1343              iobase + IRCC_LCR_B);
1344
1345         return 0;
1346 }
1347
1348 /*
1349  * Function smsc_ircc_dma_receive_complete(self)
1350  *
1351  *    Finished with receiving frames
1352  *
1353  */
1354 static void smsc_ircc_dma_receive_complete(struct smsc_ircc_cb *self)
1355 {
1356         struct sk_buff *skb;
1357         int len, msgcnt, lsr;
1358         int iobase = self->io.fir_base;
1359
1360         register_bank(iobase, 0);
1361
1362         IRDA_DEBUG(3, "%s\n", __FUNCTION__);
1363 #if 0
1364         /* Disable Rx */
1365         register_bank(iobase, 0);
1366         outb(0x00, iobase + IRCC_LCR_B);
1367 #endif
1368         register_bank(iobase, 0);
1369         outb(inb(iobase + IRCC_LSAR) & ~IRCC_LSAR_ADDRESS_MASK, iobase + IRCC_LSAR);
1370         lsr= inb(iobase + IRCC_LSR);
1371         msgcnt = inb(iobase + IRCC_LCR_B) & 0x08;
1372
1373         IRDA_DEBUG(2, "%s: dma count = %d\n", __FUNCTION__,
1374                    get_dma_residue(self->io.dma));
1375
1376         len = self->rx_buff.truesize - get_dma_residue(self->io.dma);
1377
1378         /* Look for errors */
1379         if (lsr & (IRCC_LSR_FRAME_ERROR | IRCC_LSR_CRC_ERROR | IRCC_LSR_SIZE_ERROR)) {
1380                 self->stats.rx_errors++;
1381                 if (lsr & IRCC_LSR_FRAME_ERROR)
1382                         self->stats.rx_frame_errors++;
1383                 if (lsr & IRCC_LSR_CRC_ERROR)
1384                         self->stats.rx_crc_errors++;
1385                 if (lsr & IRCC_LSR_SIZE_ERROR)
1386                         self->stats.rx_length_errors++;
1387                 if (lsr & (IRCC_LSR_UNDERRUN | IRCC_LSR_OVERRUN))
1388                         self->stats.rx_length_errors++;
1389                 return;
1390         }
1391
1392         /* Remove CRC */
1393         len -= self->io.speed < 4000000 ? 2 : 4;
1394
1395         if (len < 2 || len > 2050) {
1396                 IRDA_WARNING("%s(), bogus len=%d\n", __FUNCTION__, len);
1397                 return;
1398         }
1399         IRDA_DEBUG(2, "%s: msgcnt = %d, len=%d\n", __FUNCTION__, msgcnt, len);
1400
1401         skb = dev_alloc_skb(len + 1);
1402         if (!skb) {
1403                 IRDA_WARNING("%s(), memory squeeze, dropping frame.\n",
1404                              __FUNCTION__);
1405                 return;
1406         }
1407         /* Make sure IP header gets aligned */
1408         skb_reserve(skb, 1);
1409
1410         memcpy(skb_put(skb, len), self->rx_buff.data, len);
1411         self->stats.rx_packets++;
1412         self->stats.rx_bytes += len;
1413
1414         skb->dev = self->netdev;
1415         skb->mac.raw  = skb->data;
1416         skb->protocol = htons(ETH_P_IRDA);
1417         netif_rx(skb);
1418 }
1419
1420 /*
1421  * Function smsc_ircc_sir_receive (self)
1422  *
1423  *    Receive one frame from the infrared port
1424  *
1425  */
1426 static void smsc_ircc_sir_receive(struct smsc_ircc_cb *self)
1427 {
1428         int boguscount = 0;
1429         int iobase;
1430
1431         IRDA_ASSERT(self != NULL, return;);
1432
1433         iobase = self->io.sir_base;
1434
1435         /*
1436          * Receive all characters in Rx FIFO, unwrap and unstuff them.
1437          * async_unwrap_char will deliver all found frames
1438          */
1439         do {
1440                 async_unwrap_char(self->netdev, &self->stats, &self->rx_buff,
1441                                   inb(iobase + UART_RX));
1442
1443                 /* Make sure we don't stay here to long */
1444                 if (boguscount++ > 32) {
1445                         IRDA_DEBUG(2, "%s(), breaking!\n", __FUNCTION__);
1446                         break;
1447                 }
1448         } while (inb(iobase + UART_LSR) & UART_LSR_DR);
1449 }
1450
1451
1452 /*
1453  * Function smsc_ircc_interrupt (irq, dev_id, regs)
1454  *
1455  *    An interrupt from the chip has arrived. Time to do some work
1456  *
1457  */
1458 static irqreturn_t smsc_ircc_interrupt(int irq, void *dev_id, struct pt_regs *regs)
1459 {
1460         struct net_device *dev = (struct net_device *) dev_id;
1461         struct smsc_ircc_cb *self;
1462         int iobase, iir, lcra, lsr;
1463         irqreturn_t ret = IRQ_NONE;
1464
1465         if (dev == NULL) {
1466                 printk(KERN_WARNING "%s: irq %d for unknown device.\n",
1467                        driver_name, irq);
1468                 goto irq_ret;
1469         }
1470
1471         self = netdev_priv(dev);
1472         IRDA_ASSERT(self != NULL, return IRQ_NONE;);
1473
1474         /* Serialise the interrupt handler in various CPUs, stop Tx path */
1475         spin_lock(&self->lock);
1476
1477         /* Check if we should use the SIR interrupt handler */
1478         if (self->io.speed <= SMSC_IRCC2_MAX_SIR_SPEED) {
1479                 ret = smsc_ircc_interrupt_sir(dev);
1480                 goto irq_ret_unlock;
1481         }
1482
1483         iobase = self->io.fir_base;
1484
1485         register_bank(iobase, 0);
1486         iir = inb(iobase + IRCC_IIR);
1487         if (iir == 0)
1488                 goto irq_ret_unlock;
1489         ret = IRQ_HANDLED;
1490
1491         /* Disable interrupts */
1492         outb(0, iobase + IRCC_IER);
1493         lcra = inb(iobase + IRCC_LCR_A);
1494         lsr = inb(iobase + IRCC_LSR);
1495
1496         IRDA_DEBUG(2, "%s(), iir = 0x%02x\n", __FUNCTION__, iir);
1497
1498         if (iir & IRCC_IIR_EOM) {
1499                 if (self->io.direction == IO_RECV)
1500                         smsc_ircc_dma_receive_complete(self);
1501                 else
1502                         smsc_ircc_dma_xmit_complete(self);
1503
1504                 smsc_ircc_dma_receive(self);
1505         }
1506
1507         if (iir & IRCC_IIR_ACTIVE_FRAME) {
1508                 /*printk(KERN_WARNING "%s(): Active Frame\n", __FUNCTION__);*/
1509         }
1510
1511         /* Enable interrupts again */
1512
1513         register_bank(iobase, 0);
1514         outb(IRCC_IER_ACTIVE_FRAME | IRCC_IER_EOM, iobase + IRCC_IER);
1515
1516  irq_ret_unlock:
1517         spin_unlock(&self->lock);
1518  irq_ret:
1519         return ret;
1520 }
1521
1522 /*
1523  * Function irport_interrupt_sir (irq, dev_id, regs)
1524  *
1525  *    Interrupt handler for SIR modes
1526  */
1527 static irqreturn_t smsc_ircc_interrupt_sir(struct net_device *dev)
1528 {
1529         struct smsc_ircc_cb *self = netdev_priv(dev);
1530         int boguscount = 0;
1531         int iobase;
1532         int iir, lsr;
1533
1534         /* Already locked comming here in smsc_ircc_interrupt() */
1535         /*spin_lock(&self->lock);*/
1536
1537         iobase = self->io.sir_base;
1538
1539         iir = inb(iobase + UART_IIR) & UART_IIR_ID;
1540         if (iir == 0)
1541                 return IRQ_NONE;
1542         while (iir) {
1543                 /* Clear interrupt */
1544                 lsr = inb(iobase + UART_LSR);
1545
1546                 IRDA_DEBUG(4, "%s(), iir=%02x, lsr=%02x, iobase=%#x\n",
1547                             __FUNCTION__, iir, lsr, iobase);
1548
1549                 switch (iir) {
1550                 case UART_IIR_RLSI:
1551                         IRDA_DEBUG(2, "%s(), RLSI\n", __FUNCTION__);
1552                         break;
1553                 case UART_IIR_RDI:
1554                         /* Receive interrupt */
1555                         smsc_ircc_sir_receive(self);
1556                         break;
1557                 case UART_IIR_THRI:
1558                         if (lsr & UART_LSR_THRE)
1559                                 /* Transmitter ready for data */
1560                                 smsc_ircc_sir_write_wakeup(self);
1561                         break;
1562                 default:
1563                         IRDA_DEBUG(0, "%s(), unhandled IIR=%#x\n",
1564                                    __FUNCTION__, iir);
1565                         break;
1566                 }
1567
1568                 /* Make sure we don't stay here to long */
1569                 if (boguscount++ > 100)
1570                         break;
1571
1572                 iir = inb(iobase + UART_IIR) & UART_IIR_ID;
1573         }
1574         /*spin_unlock(&self->lock);*/
1575         return IRQ_HANDLED;
1576 }
1577
1578
1579 #if 0 /* unused */
1580 /*
1581  * Function ircc_is_receiving (self)
1582  *
1583  *    Return TRUE is we are currently receiving a frame
1584  *
1585  */
1586 static int ircc_is_receiving(struct smsc_ircc_cb *self)
1587 {
1588         int status = FALSE;
1589         /* int iobase; */
1590
1591         IRDA_DEBUG(1, "%s\n", __FUNCTION__);
1592
1593         IRDA_ASSERT(self != NULL, return FALSE;);
1594
1595         IRDA_DEBUG(0, "%s: dma count = %d\n", __FUNCTION__,
1596                    get_dma_residue(self->io.dma));
1597
1598         status = (self->rx_buff.state != OUTSIDE_FRAME);
1599
1600         return status;
1601 }
1602 #endif /* unused */
1603
1604 static int smsc_ircc_request_irq(struct smsc_ircc_cb *self)
1605 {
1606         int error;
1607
1608         error = request_irq(self->io.irq, smsc_ircc_interrupt, 0,
1609                             self->netdev->name, self->netdev);
1610         if (error)
1611                 IRDA_DEBUG(0, "%s(), unable to allocate irq=%d, err=%d\n",
1612                            __FUNCTION__, self->io.irq, error);
1613
1614         return error;
1615 }
1616
1617 static void smsc_ircc_start_interrupts(struct smsc_ircc_cb *self)
1618 {
1619         unsigned long flags;
1620
1621         spin_lock_irqsave(&self->lock, flags);
1622
1623         self->io.speed = 0;
1624         smsc_ircc_change_speed(self, SMSC_IRCC2_C_IRDA_FALLBACK_SPEED);
1625
1626         spin_unlock_irqrestore(&self->lock, flags);
1627 }
1628
1629 static void smsc_ircc_stop_interrupts(struct smsc_ircc_cb *self)
1630 {
1631         int iobase = self->io.fir_base;
1632         unsigned long flags;
1633
1634         spin_lock_irqsave(&self->lock, flags);
1635
1636         register_bank(iobase, 0);
1637         outb(0, iobase + IRCC_IER);
1638         outb(IRCC_MASTER_RESET, iobase + IRCC_MASTER);
1639         outb(0x00, iobase + IRCC_MASTER);
1640
1641         spin_unlock_irqrestore(&self->lock, flags);
1642 }
1643
1644
1645 /*
1646  * Function smsc_ircc_net_open (dev)
1647  *
1648  *    Start the device
1649  *
1650  */
1651 static int smsc_ircc_net_open(struct net_device *dev)
1652 {
1653         struct smsc_ircc_cb *self;
1654         char hwname[16];
1655
1656         IRDA_DEBUG(1, "%s\n", __FUNCTION__);
1657
1658         IRDA_ASSERT(dev != NULL, return -1;);
1659         self = netdev_priv(dev);
1660         IRDA_ASSERT(self != NULL, return 0;);
1661
1662         if (self->io.suspended) {
1663                 IRDA_DEBUG(0, "%s(), device is suspended\n", __FUNCTION__);
1664                 return -EAGAIN;
1665         }
1666
1667         if (request_irq(self->io.irq, smsc_ircc_interrupt, 0, dev->name,
1668                         (void *) dev)) {
1669                 IRDA_DEBUG(0, "%s(), unable to allocate irq=%d\n",
1670                            __FUNCTION__, self->io.irq);
1671                 return -EAGAIN;
1672         }
1673
1674         smsc_ircc_start_interrupts(self);
1675
1676         /* Give self a hardware name */
1677         /* It would be cool to offer the chip revision here - Jean II */
1678         sprintf(hwname, "SMSC @ 0x%03x", self->io.fir_base);
1679
1680         /*
1681          * Open new IrLAP layer instance, now that everything should be
1682          * initialized properly
1683          */
1684         self->irlap = irlap_open(dev, &self->qos, hwname);
1685
1686         /*
1687          * Always allocate the DMA channel after the IRQ,
1688          * and clean up on failure.
1689          */
1690         if (request_dma(self->io.dma, dev->name)) {
1691                 smsc_ircc_net_close(dev);
1692
1693                 IRDA_WARNING("%s(), unable to allocate DMA=%d\n",
1694                              __FUNCTION__, self->io.dma);
1695                 return -EAGAIN;
1696         }
1697
1698         netif_start_queue(dev);
1699
1700         return 0;
1701 }
1702
1703 /*
1704  * Function smsc_ircc_net_close (dev)
1705  *
1706  *    Stop the device
1707  *
1708  */
1709 static int smsc_ircc_net_close(struct net_device *dev)
1710 {
1711         struct smsc_ircc_cb *self;
1712
1713         IRDA_DEBUG(1, "%s\n", __FUNCTION__);
1714
1715         IRDA_ASSERT(dev != NULL, return -1;);
1716         self = netdev_priv(dev);
1717         IRDA_ASSERT(self != NULL, return 0;);
1718
1719         /* Stop device */
1720         netif_stop_queue(dev);
1721
1722         /* Stop and remove instance of IrLAP */
1723         if (self->irlap)
1724                 irlap_close(self->irlap);
1725         self->irlap = NULL;
1726
1727         smsc_ircc_stop_interrupts(self);
1728
1729         /* if we are called from smsc_ircc_resume we don't have IRQ reserved */
1730         if (!self->io.suspended)
1731                 free_irq(self->io.irq, dev);
1732
1733         disable_dma(self->io.dma);
1734         free_dma(self->io.dma);
1735
1736         return 0;
1737 }
1738
1739 static int smsc_ircc_suspend(struct platform_device *dev, pm_message_t state)
1740 {
1741         struct smsc_ircc_cb *self = platform_get_drvdata(dev);
1742
1743         if (!self->io.suspended) {
1744                 IRDA_DEBUG(1, "%s, Suspending\n", driver_name);
1745
1746                 rtnl_lock();
1747                 if (netif_running(self->netdev)) {
1748                         netif_device_detach(self->netdev);
1749                         smsc_ircc_stop_interrupts(self);
1750                         free_irq(self->io.irq, self->netdev);
1751                         disable_dma(self->io.dma);
1752                 }
1753                 self->io.suspended = 1;
1754                 rtnl_unlock();
1755         }
1756
1757         return 0;
1758 }
1759
1760 static int smsc_ircc_resume(struct platform_device *dev)
1761 {
1762         struct smsc_ircc_cb *self = platform_get_drvdata(dev);
1763
1764         if (self->io.suspended) {
1765                 IRDA_DEBUG(1, "%s, Waking up\n", driver_name);
1766
1767                 rtnl_lock();
1768                 smsc_ircc_init_chip(self);
1769                 if (netif_running(self->netdev)) {
1770                         if (smsc_ircc_request_irq(self)) {
1771                                 /*
1772                                  * Don't fail resume process, just kill this
1773                                  * network interface
1774                                  */
1775                                 unregister_netdevice(self->netdev);
1776                         } else {
1777                                 enable_dma(self->io.dma);
1778                                 smsc_ircc_start_interrupts(self);
1779                                 netif_device_attach(self->netdev);
1780                         }
1781                 }
1782                 self->io.suspended = 0;
1783                 rtnl_unlock();
1784         }
1785         return 0;
1786 }
1787
1788 /*
1789  * Function smsc_ircc_close (self)
1790  *
1791  *    Close driver instance
1792  *
1793  */
1794 static int __exit smsc_ircc_close(struct smsc_ircc_cb *self)
1795 {
1796         IRDA_DEBUG(1, "%s\n", __FUNCTION__);
1797
1798         IRDA_ASSERT(self != NULL, return -1;);
1799
1800         platform_device_unregister(self->pldev);
1801
1802         /* Remove netdevice */
1803         unregister_netdev(self->netdev);
1804
1805         smsc_ircc_stop_interrupts(self);
1806
1807         /* Release the PORTS that this driver is using */
1808         IRDA_DEBUG(0, "%s(), releasing 0x%03x\n",  __FUNCTION__,
1809                    self->io.fir_base);
1810
1811         release_region(self->io.fir_base, self->io.fir_ext);
1812
1813         IRDA_DEBUG(0, "%s(), releasing 0x%03x\n", __FUNCTION__,
1814                    self->io.sir_base);
1815
1816         release_region(self->io.sir_base, self->io.sir_ext);
1817
1818         if (self->tx_buff.head)
1819                 dma_free_coherent(NULL, self->tx_buff.truesize,
1820                                   self->tx_buff.head, self->tx_buff_dma);
1821
1822         if (self->rx_buff.head)
1823                 dma_free_coherent(NULL, self->rx_buff.truesize,
1824                                   self->rx_buff.head, self->rx_buff_dma);
1825
1826         free_netdev(self->netdev);
1827
1828         return 0;
1829 }
1830
1831 static void __exit smsc_ircc_cleanup(void)
1832 {
1833         int i;
1834
1835         IRDA_DEBUG(1, "%s\n", __FUNCTION__);
1836
1837         for (i = 0; i < 2; i++) {
1838                 if (dev_self[i])
1839                         smsc_ircc_close(dev_self[i]);
1840         }
1841
1842         platform_driver_unregister(&smsc_ircc_driver);
1843 }
1844
1845 /*
1846  *      Start SIR operations
1847  *
1848  * This function *must* be called with spinlock held, because it may
1849  * be called from the irq handler (via smsc_ircc_change_speed()). - Jean II
1850  */
1851 void smsc_ircc_sir_start(struct smsc_ircc_cb *self)
1852 {
1853         struct net_device *dev;
1854         int fir_base, sir_base;
1855
1856         IRDA_DEBUG(3, "%s\n", __FUNCTION__);
1857
1858         IRDA_ASSERT(self != NULL, return;);
1859         dev = self->netdev;
1860         IRDA_ASSERT(dev != NULL, return;);
1861         dev->hard_start_xmit = &smsc_ircc_hard_xmit_sir;
1862
1863         fir_base = self->io.fir_base;
1864         sir_base = self->io.sir_base;
1865
1866         /* Reset everything */
1867         outb(IRCC_MASTER_RESET, fir_base + IRCC_MASTER);
1868
1869         #if SMSC_IRCC2_C_SIR_STOP
1870         /*smsc_ircc_sir_stop(self);*/
1871         #endif
1872
1873         register_bank(fir_base, 1);
1874         outb(((inb(fir_base + IRCC_SCE_CFGA) & IRCC_SCE_CFGA_BLOCK_CTRL_BITS_MASK) | IRCC_CFGA_IRDA_SIR_A), fir_base + IRCC_SCE_CFGA);
1875
1876         /* Initialize UART */
1877         outb(UART_LCR_WLEN8, sir_base + UART_LCR);  /* Reset DLAB */
1878         outb((UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2), sir_base + UART_MCR);
1879
1880         /* Turn on interrups */
1881         outb(UART_IER_RLSI | UART_IER_RDI |UART_IER_THRI, sir_base + UART_IER);
1882
1883         IRDA_DEBUG(3, "%s() - exit\n", __FUNCTION__);
1884
1885         outb(0x00, fir_base + IRCC_MASTER);
1886 }
1887
1888 #if SMSC_IRCC2_C_SIR_STOP
1889 void smsc_ircc_sir_stop(struct smsc_ircc_cb *self)
1890 {
1891         int iobase;
1892
1893         IRDA_DEBUG(3, "%s\n", __FUNCTION__);
1894         iobase = self->io.sir_base;
1895
1896         /* Reset UART */
1897         outb(0, iobase + UART_MCR);
1898
1899         /* Turn off interrupts */
1900         outb(0, iobase + UART_IER);
1901 }
1902 #endif
1903
1904 /*
1905  * Function smsc_sir_write_wakeup (self)
1906  *
1907  *    Called by the SIR interrupt handler when there's room for more data.
1908  *    If we have more packets to send, we send them here.
1909  *
1910  */
1911 static void smsc_ircc_sir_write_wakeup(struct smsc_ircc_cb *self)
1912 {
1913         int actual = 0;
1914         int iobase;
1915         int fcr;
1916
1917         IRDA_ASSERT(self != NULL, return;);
1918
1919         IRDA_DEBUG(4, "%s\n", __FUNCTION__);
1920
1921         iobase = self->io.sir_base;
1922
1923         /* Finished with frame?  */
1924         if (self->tx_buff.len > 0)  {
1925                 /* Write data left in transmit buffer */
1926                 actual = smsc_ircc_sir_write(iobase, self->io.fifo_size,
1927                                       self->tx_buff.data, self->tx_buff.len);
1928                 self->tx_buff.data += actual;
1929                 self->tx_buff.len  -= actual;
1930         } else {
1931
1932         /*if (self->tx_buff.len ==0)  {*/
1933
1934                 /*
1935                  *  Now serial buffer is almost free & we can start
1936                  *  transmission of another packet. But first we must check
1937                  *  if we need to change the speed of the hardware
1938                  */
1939                 if (self->new_speed) {
1940                         IRDA_DEBUG(5, "%s(), Changing speed to %d.\n",
1941                                    __FUNCTION__, self->new_speed);
1942                         smsc_ircc_sir_wait_hw_transmitter_finish(self);
1943                         smsc_ircc_change_speed(self, self->new_speed);
1944                         self->new_speed = 0;
1945                 } else {
1946                         /* Tell network layer that we want more frames */
1947                         netif_wake_queue(self->netdev);
1948                 }
1949                 self->stats.tx_packets++;
1950
1951                 if (self->io.speed <= 115200) {
1952                         /*
1953                          * Reset Rx FIFO to make sure that all reflected transmit data
1954                          * is discarded. This is needed for half duplex operation
1955                          */
1956                         fcr = UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR;
1957                         fcr |= self->io.speed < 38400 ?
1958                                         UART_FCR_TRIGGER_1 : UART_FCR_TRIGGER_14;
1959
1960                         outb(fcr, iobase + UART_FCR);
1961
1962                         /* Turn on receive interrupts */
1963                         outb(UART_IER_RDI, iobase + UART_IER);
1964                 }
1965         }
1966 }
1967
1968 /*
1969  * Function smsc_ircc_sir_write (iobase, fifo_size, buf, len)
1970  *
1971  *    Fill Tx FIFO with transmit data
1972  *
1973  */
1974 static int smsc_ircc_sir_write(int iobase, int fifo_size, __u8 *buf, int len)
1975 {
1976         int actual = 0;
1977
1978         /* Tx FIFO should be empty! */
1979         if (!(inb(iobase + UART_LSR) & UART_LSR_THRE)) {
1980                 IRDA_WARNING("%s(), failed, fifo not empty!\n", __FUNCTION__);
1981                 return 0;
1982         }
1983
1984         /* Fill FIFO with current frame */
1985         while (fifo_size-- > 0 && actual < len) {
1986                 /* Transmit next byte */
1987                 outb(buf[actual], iobase + UART_TX);
1988                 actual++;
1989         }
1990         return actual;
1991 }
1992
1993 /*
1994  * Function smsc_ircc_is_receiving (self)
1995  *
1996  *    Returns true is we are currently receiving data
1997  *
1998  */
1999 static int smsc_ircc_is_receiving(struct smsc_ircc_cb *self)
2000 {
2001         return (self->rx_buff.state != OUTSIDE_FRAME);
2002 }
2003
2004
2005 /*
2006  * Function smsc_ircc_probe_transceiver(self)
2007  *
2008  *    Tries to find the used Transceiver
2009  *
2010  */
2011 static void smsc_ircc_probe_transceiver(struct smsc_ircc_cb *self)
2012 {
2013         unsigned int    i;
2014
2015         IRDA_ASSERT(self != NULL, return;);
2016
2017         for (i = 0; smsc_transceivers[i].name != NULL; i++)
2018                 if (smsc_transceivers[i].probe(self->io.fir_base)) {
2019                         IRDA_MESSAGE(" %s transceiver found\n",
2020                                      smsc_transceivers[i].name);
2021                         self->transceiver= i + 1;
2022                         return;
2023                 }
2024
2025         IRDA_MESSAGE("No transceiver found. Defaulting to %s\n",
2026                      smsc_transceivers[SMSC_IRCC2_C_DEFAULT_TRANSCEIVER].name);
2027
2028         self->transceiver = SMSC_IRCC2_C_DEFAULT_TRANSCEIVER;
2029 }
2030
2031
2032 /*
2033  * Function smsc_ircc_set_transceiver_for_speed(self, speed)
2034  *
2035  *    Set the transceiver according to the speed
2036  *
2037  */
2038 static void smsc_ircc_set_transceiver_for_speed(struct smsc_ircc_cb *self, u32 speed)
2039 {
2040         unsigned int trx;
2041
2042         trx = self->transceiver;
2043         if (trx > 0)
2044                 smsc_transceivers[trx - 1].set_for_speed(self->io.fir_base, speed);
2045 }
2046
2047 /*
2048  * Function smsc_ircc_wait_hw_transmitter_finish ()
2049  *
2050  *    Wait for the real end of HW transmission
2051  *
2052  * The UART is a strict FIFO, and we get called only when we have finished
2053  * pushing data to the FIFO, so the maximum amount of time we must wait
2054  * is only for the FIFO to drain out.
2055  *
2056  * We use a simple calibrated loop. We may need to adjust the loop
2057  * delay (udelay) to balance I/O traffic and latency. And we also need to
2058  * adjust the maximum timeout.
2059  * It would probably be better to wait for the proper interrupt,
2060  * but it doesn't seem to be available.
2061  *
2062  * We can't use jiffies or kernel timers because :
2063  * 1) We are called from the interrupt handler, which disable softirqs,
2064  * so jiffies won't be increased
2065  * 2) Jiffies granularity is usually very coarse (10ms), and we don't
2066  * want to wait that long to detect stuck hardware.
2067  * Jean II
2068  */
2069
2070 static void smsc_ircc_sir_wait_hw_transmitter_finish(struct smsc_ircc_cb *self)
2071 {
2072         int iobase = self->io.sir_base;
2073         int count = SMSC_IRCC2_HW_TRANSMITTER_TIMEOUT_US;
2074
2075         /* Calibrated busy loop */
2076         while (count-- > 0 && !(inb(iobase + UART_LSR) & UART_LSR_TEMT))
2077                 udelay(1);
2078
2079         if (count == 0)
2080                 IRDA_DEBUG(0, "%s(): stuck transmitter\n", __FUNCTION__);
2081 }
2082
2083
2084 /* PROBING
2085  *
2086  * REVISIT we can be told about the device by PNP, and should use that info
2087  * instead of probing hardware and creating a platform_device ...
2088  */
2089
2090 static int __init smsc_ircc_look_for_chips(void)
2091 {
2092         struct smsc_chip_address *address;
2093         char *type;
2094         unsigned int cfg_base, found;
2095
2096         found = 0;
2097         address = possible_addresses;
2098
2099         while (address->cfg_base) {
2100                 cfg_base = address->cfg_base;
2101
2102                 /*printk(KERN_WARNING "%s(): probing: 0x%02x for: 0x%02x\n", __FUNCTION__, cfg_base, address->type);*/
2103
2104                 if (address->type & SMSCSIO_TYPE_FDC) {
2105                         type = "FDC";
2106                         if (address->type & SMSCSIO_TYPE_FLAT)
2107                                 if (!smsc_superio_flat(fdc_chips_flat, cfg_base, type))
2108                                         found++;
2109
2110                         if (address->type & SMSCSIO_TYPE_PAGED)
2111                                 if (!smsc_superio_paged(fdc_chips_paged, cfg_base, type))
2112                                         found++;
2113                 }
2114                 if (address->type & SMSCSIO_TYPE_LPC) {
2115                         type = "LPC";
2116                         if (address->type & SMSCSIO_TYPE_FLAT)
2117                                 if (!smsc_superio_flat(lpc_chips_flat, cfg_base, type))
2118                                         found++;
2119
2120                         if (address->type & SMSCSIO_TYPE_PAGED)
2121                                 if (!smsc_superio_paged(lpc_chips_paged, cfg_base, type))
2122                                         found++;
2123                 }
2124                 address++;
2125         }
2126         return found;
2127 }
2128
2129 /*
2130  * Function smsc_superio_flat (chip, base, type)
2131  *
2132  *    Try to get configuration of a smc SuperIO chip with flat register model
2133  *
2134  */
2135 static int __init smsc_superio_flat(const struct smsc_chip *chips, unsigned short cfgbase, char *type)
2136 {
2137         unsigned short firbase, sirbase;
2138         u8 mode, dma, irq;
2139         int ret = -ENODEV;
2140
2141         IRDA_DEBUG(1, "%s\n", __FUNCTION__);
2142
2143         if (smsc_ircc_probe(cfgbase, SMSCSIOFLAT_DEVICEID_REG, chips, type) == NULL)
2144                 return ret;
2145
2146         outb(SMSCSIOFLAT_UARTMODE0C_REG, cfgbase);
2147         mode = inb(cfgbase + 1);
2148
2149         /*printk(KERN_WARNING "%s(): mode: 0x%02x\n", __FUNCTION__, mode);*/
2150
2151         if (!(mode & SMSCSIOFLAT_UART2MODE_VAL_IRDA))
2152                 IRDA_WARNING("%s(): IrDA not enabled\n", __FUNCTION__);
2153
2154         outb(SMSCSIOFLAT_UART2BASEADDR_REG, cfgbase);
2155         sirbase = inb(cfgbase + 1) << 2;
2156
2157         /* FIR iobase */
2158         outb(SMSCSIOFLAT_FIRBASEADDR_REG, cfgbase);
2159         firbase = inb(cfgbase + 1) << 3;
2160
2161         /* DMA */
2162         outb(SMSCSIOFLAT_FIRDMASELECT_REG, cfgbase);
2163         dma = inb(cfgbase + 1) & SMSCSIOFLAT_FIRDMASELECT_MASK;
2164
2165         /* IRQ */
2166         outb(SMSCSIOFLAT_UARTIRQSELECT_REG, cfgbase);
2167         irq = inb(cfgbase + 1) & SMSCSIOFLAT_UART2IRQSELECT_MASK;
2168
2169         IRDA_MESSAGE("%s(): fir: 0x%02x, sir: 0x%02x, dma: %02d, irq: %d, mode: 0x%02x\n", __FUNCTION__, firbase, sirbase, dma, irq, mode);
2170
2171         if (firbase && smsc_ircc_open(firbase, sirbase, dma, irq) == 0)
2172                 ret = 0;
2173
2174         /* Exit configuration */
2175         outb(SMSCSIO_CFGEXITKEY, cfgbase);
2176
2177         return ret;
2178 }
2179
2180 /*
2181  * Function smsc_superio_paged (chip, base, type)
2182  *
2183  *    Try  to get configuration of a smc SuperIO chip with paged register model
2184  *
2185  */
2186 static int __init smsc_superio_paged(const struct smsc_chip *chips, unsigned short cfg_base, char *type)
2187 {
2188         unsigned short fir_io, sir_io;
2189         int ret = -ENODEV;
2190
2191         IRDA_DEBUG(1, "%s\n", __FUNCTION__);
2192
2193         if (smsc_ircc_probe(cfg_base, 0x20, chips, type) == NULL)
2194                 return ret;
2195
2196         /* Select logical device (UART2) */
2197         outb(0x07, cfg_base);
2198         outb(0x05, cfg_base + 1);
2199
2200         /* SIR iobase */
2201         outb(0x60, cfg_base);
2202         sir_io = inb(cfg_base + 1) << 8;
2203         outb(0x61, cfg_base);
2204         sir_io |= inb(cfg_base + 1);
2205
2206         /* Read FIR base */
2207         outb(0x62, cfg_base);
2208         fir_io = inb(cfg_base + 1) << 8;
2209         outb(0x63, cfg_base);
2210         fir_io |= inb(cfg_base + 1);
2211         outb(0x2b, cfg_base); /* ??? */
2212
2213         if (fir_io && smsc_ircc_open(fir_io, sir_io, ircc_dma, ircc_irq) == 0)
2214                 ret = 0;
2215
2216         /* Exit configuration */
2217         outb(SMSCSIO_CFGEXITKEY, cfg_base);
2218
2219         return ret;
2220 }
2221
2222
2223 static int __init smsc_access(unsigned short cfg_base, unsigned char reg)
2224 {
2225         IRDA_DEBUG(1, "%s\n", __FUNCTION__);
2226
2227         outb(reg, cfg_base);
2228         return inb(cfg_base) != reg ? -1 : 0;
2229 }
2230
2231 static const struct smsc_chip * __init smsc_ircc_probe(unsigned short cfg_base, u8 reg, const struct smsc_chip *chip, char *type)
2232 {
2233         u8 devid, xdevid, rev;
2234
2235         IRDA_DEBUG(1, "%s\n", __FUNCTION__);
2236
2237         /* Leave configuration */
2238
2239         outb(SMSCSIO_CFGEXITKEY, cfg_base);
2240
2241         if (inb(cfg_base) == SMSCSIO_CFGEXITKEY)        /* not a smc superio chip */
2242                 return NULL;
2243
2244         outb(reg, cfg_base);
2245
2246         xdevid = inb(cfg_base + 1);
2247
2248         /* Enter configuration */
2249
2250         outb(SMSCSIO_CFGACCESSKEY, cfg_base);
2251
2252         #if 0
2253         if (smsc_access(cfg_base,0x55)) /* send second key and check */
2254                 return NULL;
2255         #endif
2256
2257         /* probe device ID */
2258
2259         if (smsc_access(cfg_base, reg))
2260                 return NULL;
2261
2262         devid = inb(cfg_base + 1);
2263
2264         if (devid == 0 || devid == 0xff)        /* typical values for unused port */
2265                 return NULL;
2266
2267         /* probe revision ID */
2268
2269         if (smsc_access(cfg_base, reg + 1))
2270                 return NULL;
2271
2272         rev = inb(cfg_base + 1);
2273
2274         if (rev >= 128)                 /* i think this will make no sense */
2275                 return NULL;
2276
2277         if (devid == xdevid)            /* protection against false positives */
2278                 return NULL;
2279
2280         /* Check for expected device ID; are there others? */
2281
2282         while (chip->devid != devid) {
2283
2284                 chip++;
2285
2286                 if (chip->name == NULL)
2287                         return NULL;
2288         }
2289
2290         IRDA_MESSAGE("found SMC SuperIO Chip (devid=0x%02x rev=%02X base=0x%04x): %s%s\n",
2291                      devid, rev, cfg_base, type, chip->name);
2292
2293         if (chip->rev > rev) {
2294                 IRDA_MESSAGE("Revision higher than expected\n");
2295                 return NULL;
2296         }
2297
2298         if (chip->flags & NoIRDA)
2299                 IRDA_MESSAGE("chipset does not support IRDA\n");
2300
2301         return chip;
2302 }
2303
2304 static int __init smsc_superio_fdc(unsigned short cfg_base)
2305 {
2306         int ret = -1;
2307
2308         if (!request_region(cfg_base, 2, driver_name)) {
2309                 IRDA_WARNING("%s: can't get cfg_base of 0x%03x\n",
2310                              __FUNCTION__, cfg_base);
2311         } else {
2312                 if (!smsc_superio_flat(fdc_chips_flat, cfg_base, "FDC") ||
2313                     !smsc_superio_paged(fdc_chips_paged, cfg_base, "FDC"))
2314                         ret =  0;
2315
2316                 release_region(cfg_base, 2);
2317         }
2318
2319         return ret;
2320 }
2321
2322 static int __init smsc_superio_lpc(unsigned short cfg_base)
2323 {
2324         int ret = -1;
2325
2326         if (!request_region(cfg_base, 2, driver_name)) {
2327                 IRDA_WARNING("%s: can't get cfg_base of 0x%03x\n",
2328                              __FUNCTION__, cfg_base);
2329         } else {
2330                 if (!smsc_superio_flat(lpc_chips_flat, cfg_base, "LPC") ||
2331                     !smsc_superio_paged(lpc_chips_paged, cfg_base, "LPC"))
2332                         ret = 0;
2333
2334                 release_region(cfg_base, 2);
2335         }
2336         return ret;
2337 }
2338
2339 /*
2340  * Look for some specific subsystem setups that need
2341  * pre-configuration not properly done by the BIOS (especially laptops)
2342  * This code is based in part on smcinit.c, tosh1800-smcinit.c
2343  * and tosh2450-smcinit.c. The table lists the device entries
2344  * for ISA bridges with an LPC (Low Pin Count) controller which
2345  * handles the communication with the SMSC device. After the LPC
2346  * controller is initialized through PCI, the SMSC device is initialized
2347  * through a dedicated port in the ISA port-mapped I/O area, this latter
2348  * area is used to configure the SMSC device with default
2349  * SIR and FIR I/O ports, DMA and IRQ. Different vendors have
2350  * used different sets of parameters and different control port
2351  * addresses making a subsystem device table necessary.
2352  */
2353 #ifdef CONFIG_PCI
2354 #define PCIID_VENDOR_INTEL 0x8086
2355 #define PCIID_VENDOR_ALI 0x10b9
2356 static struct smsc_ircc_subsystem_configuration subsystem_configurations[] __initdata = {
2357         {
2358                 .vendor = PCIID_VENDOR_INTEL, /* Intel 82801DBM LPC bridge */
2359                 .device = 0x24cc,
2360                 .subvendor = 0x103c,
2361                 .subdevice = 0x088c,
2362                 /* Quite certain these are the same for nc8000 as for nc6000 */
2363                 .sir_io = 0x02f8,
2364                 .fir_io = 0x0130,
2365                 .fir_irq = 0x05,
2366                 .fir_dma = 0x03,
2367                 .cfg_base = 0x004e,
2368                 .preconfigure = preconfigure_through_82801,
2369                 .name = "HP nc8000",
2370         },
2371         {
2372                 .vendor = PCIID_VENDOR_INTEL, /* Intel 82801DBM LPC bridge */
2373                 .device = 0x24cc,
2374                 .subvendor = 0x103c,
2375                 .subdevice = 0x0890,
2376                 .sir_io = 0x02f8,
2377                 .fir_io = 0x0130,
2378                 .fir_irq = 0x05,
2379                 .fir_dma = 0x03,
2380                 .cfg_base = 0x004e,
2381                 .preconfigure = preconfigure_through_82801,
2382                 .name = "HP nc6000",
2383         },
2384         {
2385                 /* Intel 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge */
2386                 .vendor = PCIID_VENDOR_INTEL,
2387                 .device = 0x24c0,
2388                 .subvendor = 0x1179,
2389                 .subdevice = 0xffff, /* 0xffff is "any" */
2390                 .sir_io = 0x03f8,
2391                 .fir_io = 0x0130,
2392                 .fir_irq = 0x07,
2393                 .fir_dma = 0x01,
2394                 .cfg_base = 0x002e,
2395                 .preconfigure = preconfigure_through_82801,
2396                 .name = "Toshiba laptop with Intel 82801DB/DBL LPC bridge",
2397         },
2398         {
2399                 .vendor = PCIID_VENDOR_INTEL, /* Intel 82801CAM ISA bridge */
2400                 .device = 0x248c,
2401                 .subvendor = 0x1179,
2402                 .subdevice = 0xffff, /* 0xffff is "any" */
2403                 .sir_io = 0x03f8,
2404                 .fir_io = 0x0130,
2405                 .fir_irq = 0x03,
2406                 .fir_dma = 0x03,
2407                 .cfg_base = 0x002e,
2408                 .preconfigure = preconfigure_through_82801,
2409                 .name = "Toshiba laptop with Intel 82801CAM ISA bridge",
2410         },
2411         {
2412                 /* 82801DBM (ICH4-M) LPC Interface Bridge */
2413                 .vendor = PCIID_VENDOR_INTEL,
2414                 .device = 0x24cc,
2415                 .subvendor = 0x1179,
2416                 .subdevice = 0xffff, /* 0xffff is "any" */
2417                 .sir_io = 0x03f8,
2418                 .fir_io = 0x0130,
2419                 .fir_irq = 0x03,
2420                 .fir_dma = 0x03,
2421                 .cfg_base = 0x002e,
2422                 .preconfigure = preconfigure_through_82801,
2423                 .name = "Toshiba laptop with Intel 8281DBM LPC bridge",
2424         },
2425         {
2426                 /* ALi M1533/M1535 PCI to ISA Bridge [Aladdin IV/V/V+] */
2427                 .vendor = PCIID_VENDOR_ALI,
2428                 .device = 0x1533,
2429                 .subvendor = 0x1179,
2430                 .subdevice = 0xffff, /* 0xffff is "any" */
2431                 .sir_io = 0x02e8,
2432                 .fir_io = 0x02f8,
2433                 .fir_irq = 0x07,
2434                 .fir_dma = 0x03,
2435                 .cfg_base = 0x002e,
2436                 .preconfigure = preconfigure_through_ali,
2437                 .name = "Toshiba laptop with ALi ISA bridge",
2438         },
2439         { } // Terminator
2440 };
2441
2442
2443 /*
2444  * This sets up the basic SMSC parameters
2445  * (FIR port, SIR port, FIR DMA, FIR IRQ)
2446  * through the chip configuration port.
2447  */
2448 static int __init preconfigure_smsc_chip(struct
2449                                          smsc_ircc_subsystem_configuration
2450                                          *conf)
2451 {
2452         unsigned short iobase = conf->cfg_base;
2453         unsigned char tmpbyte;
2454
2455         outb(LPC47N227_CFGACCESSKEY, iobase); // enter configuration state
2456         outb(SMSCSIOFLAT_DEVICEID_REG, iobase); // set for device ID
2457         tmpbyte = inb(iobase +1); // Read device ID
2458         IRDA_DEBUG(0,
2459                    "Detected Chip id: 0x%02x, setting up registers...\n",
2460                    tmpbyte);
2461
2462         /* Disable UART1 and set up SIR I/O port */
2463         outb(0x24, iobase);  // select CR24 - UART1 base addr
2464         outb(0x00, iobase + 1); // disable UART1
2465         outb(SMSCSIOFLAT_UART2BASEADDR_REG, iobase);  // select CR25 - UART2 base addr
2466         outb( (conf->sir_io >> 2), iobase + 1); // bits 2-9 of 0x3f8
2467         tmpbyte = inb(iobase + 1);
2468         if (tmpbyte != (conf->sir_io >> 2) ) {
2469                 IRDA_WARNING("ERROR: could not configure SIR ioport.\n");
2470                 IRDA_WARNING("Try to supply ircc_cfg argument.\n");
2471                 return -ENXIO;
2472         }
2473
2474         /* Set up FIR IRQ channel for UART2 */
2475         outb(SMSCSIOFLAT_UARTIRQSELECT_REG, iobase); // select CR28 - UART1,2 IRQ select
2476         tmpbyte = inb(iobase + 1);
2477         tmpbyte &= SMSCSIOFLAT_UART1IRQSELECT_MASK; // Do not touch the UART1 portion
2478         tmpbyte |= (conf->fir_irq & SMSCSIOFLAT_UART2IRQSELECT_MASK);
2479         outb(tmpbyte, iobase + 1);
2480         tmpbyte = inb(iobase + 1) & SMSCSIOFLAT_UART2IRQSELECT_MASK;
2481         if (tmpbyte != conf->fir_irq) {
2482                 IRDA_WARNING("ERROR: could not configure FIR IRQ channel.\n");
2483                 return -ENXIO;
2484         }
2485
2486         /* Set up FIR I/O port */
2487         outb(SMSCSIOFLAT_FIRBASEADDR_REG, iobase);  // CR2B - SCE (FIR) base addr
2488         outb((conf->fir_io >> 3), iobase + 1);
2489         tmpbyte = inb(iobase + 1);
2490         if (tmpbyte != (conf->fir_io >> 3) ) {
2491                 IRDA_WARNING("ERROR: could not configure FIR I/O port.\n");
2492                 return -ENXIO;
2493         }
2494
2495         /* Set up FIR DMA channel */
2496         outb(SMSCSIOFLAT_FIRDMASELECT_REG, iobase);  // CR2C - SCE (FIR) DMA select
2497         outb((conf->fir_dma & LPC47N227_FIRDMASELECT_MASK), iobase + 1); // DMA
2498         tmpbyte = inb(iobase + 1) & LPC47N227_FIRDMASELECT_MASK;
2499         if (tmpbyte != (conf->fir_dma & LPC47N227_FIRDMASELECT_MASK)) {
2500                 IRDA_WARNING("ERROR: could not configure FIR DMA channel.\n");
2501                 return -ENXIO;
2502         }
2503
2504         outb(SMSCSIOFLAT_UARTMODE0C_REG, iobase);  // CR0C - UART mode
2505         tmpbyte = inb(iobase + 1);
2506         tmpbyte &= ~SMSCSIOFLAT_UART2MODE_MASK |
2507                 SMSCSIOFLAT_UART2MODE_VAL_IRDA;
2508         outb(tmpbyte, iobase + 1); // enable IrDA (HPSIR) mode, high speed
2509
2510         outb(LPC47N227_APMBOOTDRIVE_REG, iobase);  // CR07 - Auto Pwr Mgt/boot drive sel
2511         tmpbyte = inb(iobase + 1);
2512         outb(tmpbyte | LPC47N227_UART2AUTOPWRDOWN_MASK, iobase + 1); // enable UART2 autopower down
2513
2514         /* This one was not part of tosh1800 */
2515         outb(0x0a, iobase);  // CR0a - ecp fifo / ir mux
2516         tmpbyte = inb(iobase + 1);
2517         outb(tmpbyte | 0x40, iobase + 1); // send active device to ir port
2518
2519         outb(LPC47N227_UART12POWER_REG, iobase);  // CR02 - UART 1,2 power
2520         tmpbyte = inb(iobase + 1);
2521         outb(tmpbyte | LPC47N227_UART2POWERDOWN_MASK, iobase + 1); // UART2 power up mode, UART1 power down
2522
2523         outb(LPC47N227_FDCPOWERVALIDCONF_REG, iobase);  // CR00 - FDC Power/valid config cycle
2524         tmpbyte = inb(iobase + 1);
2525         outb(tmpbyte | LPC47N227_VALID_MASK, iobase + 1); // valid config cycle done
2526
2527         outb(LPC47N227_CFGEXITKEY, iobase);  // Exit configuration
2528
2529         return 0;
2530 }
2531
2532 /* 82801CAM generic registers */
2533 #define VID 0x00
2534 #define DID 0x02
2535 #define PIRQ_A_D_ROUT 0x60
2536 #define SIRQ_CNTL 0x64
2537 #define PIRQ_E_H_ROUT 0x68
2538 #define PCI_DMA_C 0x90
2539 /* LPC-specific registers */
2540 #define COM_DEC 0xe0
2541 #define GEN1_DEC 0xe4
2542 #define LPC_EN 0xe6
2543 #define GEN2_DEC 0xec
2544 /*
2545  * Sets up the I/O range using the 82801CAM ISA bridge, 82801DBM LPC bridge
2546  * or Intel 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge.
2547  * They all work the same way!
2548  */
2549 static int __init preconfigure_through_82801(struct pci_dev *dev,
2550                                              struct
2551                                              smsc_ircc_subsystem_configuration
2552                                              *conf)
2553 {
2554         unsigned short tmpword;
2555         unsigned char tmpbyte;
2556
2557         IRDA_MESSAGE("Setting up Intel 82801 controller and SMSC device\n");
2558         /*
2559          * Select the range for the COMA COM port (SIR)
2560          * Register COM_DEC:
2561          * Bit 7: reserved
2562          * Bit 6-4, COMB decode range
2563          * Bit 3: reserved
2564          * Bit 2-0, COMA decode range
2565          *
2566          * Decode ranges:
2567          *   000 = 0x3f8-0x3ff (COM1)
2568          *   001 = 0x2f8-0x2ff (COM2)
2569          *   010 = 0x220-0x227
2570          *   011 = 0x228-0x22f
2571          *   100 = 0x238-0x23f
2572          *   101 = 0x2e8-0x2ef (COM4)
2573          *   110 = 0x338-0x33f
2574          *   111 = 0x3e8-0x3ef (COM3)
2575          */
2576         pci_read_config_byte(dev, COM_DEC, &tmpbyte);
2577         tmpbyte &= 0xf8; /* mask COMA bits */
2578         switch(conf->sir_io) {
2579         case 0x3f8:
2580                 tmpbyte |= 0x00;
2581                 break;
2582         case 0x2f8:
2583                 tmpbyte |= 0x01;
2584                 break;
2585         case 0x220:
2586                 tmpbyte |= 0x02;
2587                 break;
2588         case 0x228:
2589                 tmpbyte |= 0x03;
2590                 break;
2591         case 0x238:
2592                 tmpbyte |= 0x04;
2593                 break;
2594         case 0x2e8:
2595                 tmpbyte |= 0x05;
2596                 break;
2597         case 0x338:
2598                 tmpbyte |= 0x06;
2599                 break;
2600         case 0x3e8:
2601                 tmpbyte |= 0x07;
2602                 break;
2603         default:
2604                 tmpbyte |= 0x01; /* COM2 default */
2605         }
2606         IRDA_DEBUG(1, "COM_DEC (write): 0x%02x\n", tmpbyte);
2607         pci_write_config_byte(dev, COM_DEC, tmpbyte);
2608
2609         /* Enable Low Pin Count interface */
2610         pci_read_config_word(dev, LPC_EN, &tmpword);
2611         /* These seem to be set up at all times,
2612          * just make sure it is properly set.
2613          */
2614         switch(conf->cfg_base) {
2615         case 0x04e:
2616                 tmpword |= 0x2000;
2617                 break;
2618         case 0x02e:
2619                 tmpword |= 0x1000;
2620                 break;
2621         case 0x062:
2622                 tmpword |= 0x0800;
2623                 break;
2624         case 0x060:
2625                 tmpword |= 0x0400;
2626                 break;
2627         default:
2628                 IRDA_WARNING("Uncommon I/O base address: 0x%04x\n",
2629                              conf->cfg_base);
2630                 break;
2631         }
2632         tmpword &= 0xfffd; /* disable LPC COMB */
2633         tmpword |= 0x0001; /* set bit 0 : enable LPC COMA addr range (GEN2) */
2634         IRDA_DEBUG(1, "LPC_EN (write): 0x%04x\n", tmpword);
2635         pci_write_config_word(dev, LPC_EN, tmpword);
2636
2637         /*
2638          * Configure LPC DMA channel
2639          * PCI_DMA_C bits:
2640          * Bit 15-14: DMA channel 7 select
2641          * Bit 13-12: DMA channel 6 select
2642          * Bit 11-10: DMA channel 5 select
2643          * Bit 9-8:   Reserved
2644          * Bit 7-6:   DMA channel 3 select
2645          * Bit 5-4:   DMA channel 2 select
2646          * Bit 3-2:   DMA channel 1 select
2647          * Bit 1-0:   DMA channel 0 select
2648          *  00 = Reserved value
2649          *  01 = PC/PCI DMA
2650          *  10 = Reserved value
2651          *  11 = LPC I/F DMA
2652          */
2653         pci_read_config_word(dev, PCI_DMA_C, &tmpword);
2654         switch(conf->fir_dma) {
2655         case 0x07:
2656                 tmpword |= 0xc000;
2657                 break;
2658         case 0x06:
2659                 tmpword |= 0x3000;
2660                 break;
2661         case 0x05:
2662                 tmpword |= 0x0c00;
2663                 break;
2664         case 0x03:
2665                 tmpword |= 0x00c0;
2666                 break;
2667         case 0x02:
2668                 tmpword |= 0x0030;
2669                 break;
2670         case 0x01:
2671                 tmpword |= 0x000c;
2672                 break;
2673         case 0x00:
2674                 tmpword |= 0x0003;
2675                 break;
2676         default:
2677                 break; /* do not change settings */
2678         }
2679         IRDA_DEBUG(1, "PCI_DMA_C (write): 0x%04x\n", tmpword);
2680         pci_write_config_word(dev, PCI_DMA_C, tmpword);
2681
2682         /*
2683          * GEN2_DEC bits:
2684          * Bit 15-4: Generic I/O range
2685          * Bit 3-1: reserved (read as 0)
2686          * Bit 0: enable GEN2 range on LPC I/F
2687          */
2688         tmpword = conf->fir_io & 0xfff8;
2689         tmpword |= 0x0001;
2690         IRDA_DEBUG(1, "GEN2_DEC (write): 0x%04x\n", tmpword);
2691         pci_write_config_word(dev, GEN2_DEC, tmpword);
2692
2693         /* Pre-configure chip */
2694         return preconfigure_smsc_chip(conf);
2695 }
2696
2697 /*
2698  * Pre-configure a certain port on the ALi 1533 bridge.
2699  * This is based on reverse-engineering since ALi does not
2700  * provide any data sheet for the 1533 chip.
2701  */
2702 static void __init preconfigure_ali_port(struct pci_dev *dev,
2703                                          unsigned short port)
2704 {
2705         unsigned char reg;
2706         /* These bits obviously control the different ports */
2707         unsigned char mask;
2708         unsigned char tmpbyte;
2709
2710         switch(port) {
2711         case 0x0130:
2712         case 0x0178:
2713                 reg = 0xb0;
2714                 mask = 0x80;
2715                 break;
2716         case 0x03f8:
2717                 reg = 0xb4;
2718                 mask = 0x80;
2719                 break;
2720         case 0x02f8:
2721                 reg = 0xb4;
2722                 mask = 0x30;
2723                 break;
2724         case 0x02e8:
2725                 reg = 0xb4;
2726                 mask = 0x08;
2727                 break;
2728         default:
2729                 IRDA_ERROR("Failed to configure unsupported port on ALi 1533 bridge: 0x%04x\n", port);
2730                 return;
2731         }
2732
2733         pci_read_config_byte(dev, reg, &tmpbyte);
2734         /* Turn on the right bits */
2735         tmpbyte |= mask;
2736         pci_write_config_byte(dev, reg, tmpbyte);
2737         IRDA_MESSAGE("Activated ALi 1533 ISA bridge port 0x%04x.\n", port);
2738         return;
2739 }
2740
2741 static int __init preconfigure_through_ali(struct pci_dev *dev,
2742                                            struct
2743                                            smsc_ircc_subsystem_configuration
2744                                            *conf)
2745 {
2746         /* Configure the two ports on the ALi 1533 */
2747         preconfigure_ali_port(dev, conf->sir_io);
2748         preconfigure_ali_port(dev, conf->fir_io);
2749
2750         /* Pre-configure chip */
2751         return preconfigure_smsc_chip(conf);
2752 }
2753
2754 static int __init smsc_ircc_preconfigure_subsystems(unsigned short ircc_cfg,
2755                                                     unsigned short ircc_fir,
2756                                                     unsigned short ircc_sir,
2757                                                     unsigned char ircc_dma,
2758                                                     unsigned char ircc_irq)
2759 {
2760         struct pci_dev *dev = NULL;
2761         unsigned short ss_vendor = 0x0000;
2762         unsigned short ss_device = 0x0000;
2763         int ret = 0;
2764
2765         dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev);
2766
2767         while (dev != NULL) {
2768                 struct smsc_ircc_subsystem_configuration *conf;
2769
2770                 /*
2771                  * Cache the subsystem vendor/device:
2772                  * some manufacturers fail to set this for all components,
2773                  * so we save it in case there is just 0x0000 0x0000 on the
2774                  * device we want to check.
2775                  */
2776                 if (dev->subsystem_vendor != 0x0000U) {
2777                         ss_vendor = dev->subsystem_vendor;
2778                         ss_device = dev->subsystem_device;
2779                 }
2780                 conf = subsystem_configurations;
2781                 for( ; conf->subvendor; conf++) {
2782                         if(conf->vendor == dev->vendor &&
2783                            conf->device == dev->device &&
2784                            conf->subvendor == ss_vendor &&
2785                            /* Sometimes these are cached values */
2786                            (conf->subdevice == ss_device ||
2787                             conf->subdevice == 0xffff)) {
2788                                 struct smsc_ircc_subsystem_configuration
2789                                         tmpconf;
2790
2791                                 memcpy(&tmpconf, conf,
2792                                        sizeof(struct smsc_ircc_subsystem_configuration));
2793
2794                                 /*
2795                                  * Override the default values with anything
2796                                  * passed in as parameter
2797                                  */
2798                                 if (ircc_cfg != 0)
2799                                         tmpconf.cfg_base = ircc_cfg;
2800                                 if (ircc_fir != 0)
2801                                         tmpconf.fir_io = ircc_fir;
2802                                 if (ircc_sir != 0)
2803                                         tmpconf.sir_io = ircc_sir;
2804                                 if (ircc_dma != 0xff)
2805                                         tmpconf.fir_dma = ircc_dma;
2806                                 if (ircc_irq != 0xff)
2807                                         tmpconf.fir_irq = ircc_irq;
2808
2809                                 IRDA_MESSAGE("Detected unconfigured %s SMSC IrDA chip, pre-configuring device.\n", conf->name);
2810                                 if (conf->preconfigure)
2811                                         ret = conf->preconfigure(dev, &tmpconf);
2812                                 else
2813                                         ret = -ENODEV;
2814                         }
2815                 }
2816                 dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev);
2817         }
2818
2819         return ret;
2820 }
2821 #endif // CONFIG_PCI
2822
2823 /************************************************
2824  *
2825  * Transceivers specific functions
2826  *
2827  ************************************************/
2828
2829
2830 /*
2831  * Function smsc_ircc_set_transceiver_smsc_ircc_atc(fir_base, speed)
2832  *
2833  *    Program transceiver through smsc-ircc ATC circuitry
2834  *
2835  */
2836
2837 static void smsc_ircc_set_transceiver_smsc_ircc_atc(int fir_base, u32 speed)
2838 {
2839         unsigned long jiffies_now, jiffies_timeout;
2840         u8 val;
2841
2842         jiffies_now = jiffies;
2843         jiffies_timeout = jiffies + SMSC_IRCC2_ATC_PROGRAMMING_TIMEOUT_JIFFIES;
2844
2845         /* ATC */
2846         register_bank(fir_base, 4);
2847         outb((inb(fir_base + IRCC_ATC) & IRCC_ATC_MASK) | IRCC_ATC_nPROGREADY|IRCC_ATC_ENABLE,
2848              fir_base + IRCC_ATC);
2849
2850         while ((val = (inb(fir_base + IRCC_ATC) & IRCC_ATC_nPROGREADY)) &&
2851                 !time_after(jiffies, jiffies_timeout))
2852                 /* empty */;
2853
2854         if (val)
2855                 IRDA_WARNING("%s(): ATC: 0x%02x\n", __FUNCTION__,
2856                              inb(fir_base + IRCC_ATC));
2857 }
2858
2859 /*
2860  * Function smsc_ircc_probe_transceiver_smsc_ircc_atc(fir_base)
2861  *
2862  *    Probe transceiver smsc-ircc ATC circuitry
2863  *
2864  */
2865
2866 static int smsc_ircc_probe_transceiver_smsc_ircc_atc(int fir_base)
2867 {
2868         return 0;
2869 }
2870
2871 /*
2872  * Function smsc_ircc_set_transceiver_smsc_ircc_fast_pin_select(self, speed)
2873  *
2874  *    Set transceiver
2875  *
2876  */
2877
2878 static void smsc_ircc_set_transceiver_smsc_ircc_fast_pin_select(int fir_base, u32 speed)
2879 {
2880         u8 fast_mode;
2881
2882         switch (speed) {
2883         default:
2884         case 576000 :
2885                 fast_mode = 0;
2886                 break;
2887         case 1152000 :
2888         case 4000000 :
2889                 fast_mode = IRCC_LCR_A_FAST;
2890                 break;
2891         }
2892         register_bank(fir_base, 0);
2893         outb((inb(fir_base + IRCC_LCR_A) & 0xbf) | fast_mode, fir_base + IRCC_LCR_A);
2894 }
2895
2896 /*
2897  * Function smsc_ircc_probe_transceiver_smsc_ircc_fast_pin_select(fir_base)
2898  *
2899  *    Probe transceiver
2900  *
2901  */
2902
2903 static int smsc_ircc_probe_transceiver_smsc_ircc_fast_pin_select(int fir_base)
2904 {
2905         return 0;
2906 }
2907
2908 /*
2909  * Function smsc_ircc_set_transceiver_toshiba_sat1800(fir_base, speed)
2910  *
2911  *    Set transceiver
2912  *
2913  */
2914
2915 static void smsc_ircc_set_transceiver_toshiba_sat1800(int fir_base, u32 speed)
2916 {
2917         u8 fast_mode;
2918
2919         switch (speed) {
2920         default:
2921         case 576000 :
2922                 fast_mode = 0;
2923                 break;
2924         case 1152000 :
2925         case 4000000 :
2926                 fast_mode = /*IRCC_LCR_A_FAST |*/ IRCC_LCR_A_GP_DATA;
2927                 break;
2928
2929         }
2930         /* This causes an interrupt */
2931         register_bank(fir_base, 0);
2932         outb((inb(fir_base + IRCC_LCR_A) &  0xbf) | fast_mode, fir_base + IRCC_LCR_A);
2933 }
2934
2935 /*
2936  * Function smsc_ircc_probe_transceiver_toshiba_sat1800(fir_base)
2937  *
2938  *    Probe transceiver
2939  *
2940  */
2941
2942 static int smsc_ircc_probe_transceiver_toshiba_sat1800(int fir_base)
2943 {
2944         return 0;
2945 }
2946
2947
2948 module_init(smsc_ircc_init);
2949 module_exit(smsc_ircc_cleanup);