drivers/net/irda/nsc-ircc.c

   1 /*********************************************************************
   2  *
   3  * Filename:      nsc-ircc.c
   4  * Version:       1.0
   5  * Description:   Driver for the NSC PC'108 and PC'338 IrDA chipsets
   6  * Status:        Stable.
   7  * Author:        Dag Brattli <dagb@cs.uit.no>
   8  * Created at:    Sat Nov  7 21:43:15 1998
   9  * Modified at:   Wed Mar  1 11:29:34 2000
  10  * Modified by:   Dag Brattli <dagb@cs.uit.no>
  11  *
  12  *     Copyright (c) 1998-2000 Dag Brattli <dagb@cs.uit.no>
  13  *     Copyright (c) 1998 Lichen Wang, <lwang@actisys.com>
  14  *     Copyright (c) 1998 Actisys Corp., www.actisys.com
  15  *     Copyright (c) 2000-2004 Jean Tourrilhes <jt@hpl.hp.com>
  16  *     All Rights Reserved
  17  *
  18  *     This program is free software; you can redistribute it and/or
  19  *     modify it under the terms of the GNU General Public License as
  20  *     published by the Free Software Foundation; either version 2 of
  21  *     the License, or (at your option) any later version.
  22  *
  23  *     Neither Dag Brattli nor University of Tromsø admit liability nor
  24  *     provide warranty for any of this software. This material is
  25  *     provided "AS-IS" and at no charge.
  26  *
  27  *     Notice that all functions that needs to access the chip in _any_
  28  *     way, must save BSR register on entry, and restore it on exit.
  29  *     It is _very_ important to follow this policy!
  30  *
  31  *         __u8 bank;
  32  *
  33  *         bank = inb(iobase+BSR);
  34  *
  35  *         do_your_stuff_here();
  36  *
  37  *         outb(bank, iobase+BSR);
  38  *
  39  *    If you find bugs in this file, its very likely that the same bug
  40  *    will also be in w83977af_ir.c since the implementations are quite
  41  *    similar.
  42  *
  43  ********************************************************************/
  44
  45 #include <linux/module.h>
  46
  47 #include <linux/kernel.h>
  48 #include <linux/types.h>
  49 #include <linux/skbuff.h>
  50 #include <linux/netdevice.h>
  51 #include <linux/ioport.h>
  52 #include <linux/delay.h>
  53 #include <linux/slab.h>
  54 #include <linux/init.h>
  55 #include <linux/rtnetlink.h>
  56 #include <linux/dma-mapping.h>
  57 #include <linux/pnp.h>
  58 #include <linux/platform_device.h>
  59
  60 #include <asm/io.h>
  61 #include <asm/dma.h>
  62 #include <asm/byteorder.h>
  63
  64 #include <net/irda/wrapper.h>
  65 #include <net/irda/irda.h>
  66 #include <net/irda/irda_device.h>
  67
  68 #include "nsc-ircc.h"
  69
  70 #define CHIP_IO_EXTENT 8
  71 #define BROKEN_DONGLE_ID
  72
  73 static char *driver_name = "nsc-ircc";
  74
  75 /* Power Management */
  76 #define NSC_IRCC_DRIVER_NAME                  "nsc-ircc"
  77 static int nsc_ircc_suspend(struct platform_device *dev, pm_message_t state);
  78 static int nsc_ircc_resume(struct platform_device *dev);
  79
  80 static struct platform_driver nsc_ircc_driver = {
  81         .suspend        = nsc_ircc_suspend,
  82         .resume         = nsc_ircc_resume,
  83         .driver         = {
  84                 .name   = NSC_IRCC_DRIVER_NAME,
  85         },
  86 };
  87
  88 /* Module parameters */
  89 static int qos_mtt_bits = 0x07;  /* 1 ms or more */
  90 static int dongle_id;
  91
  92 /* Use BIOS settions by default, but user may supply module parameters */
  93 static unsigned int io[]  = { ~0, ~0, ~0, ~0, ~0 };
  94 static unsigned int irq[] = {  0,  0,  0,  0,  0 };
  95 static unsigned int dma[] = {  0,  0,  0,  0,  0 };
  96
  97 static int nsc_ircc_probe_108(nsc_chip_t *chip, chipio_t *info);
  98 static int nsc_ircc_probe_338(nsc_chip_t *chip, chipio_t *info);
  99 static int nsc_ircc_probe_39x(nsc_chip_t *chip, chipio_t *info);
 100 static int nsc_ircc_init_108(nsc_chip_t *chip, chipio_t *info);
 101 static int nsc_ircc_init_338(nsc_chip_t *chip, chipio_t *info);
 102 static int nsc_ircc_init_39x(nsc_chip_t *chip, chipio_t *info);
 103 #ifdef CONFIG_PNP
 104 static int nsc_ircc_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *id);
 105 #endif
 106
 107 /* These are the known NSC chips */
 108 static nsc_chip_t chips[] = {
 109 /*  Name, {cfg registers}, chip id index reg, chip id expected value, revision mask */
 110         { "PC87108", { 0x150, 0x398, 0xea }, 0x05, 0x10, 0xf0,
 111           nsc_ircc_probe_108, nsc_ircc_init_108 },
 112         { "PC87338", { 0x398, 0x15c, 0x2e }, 0x08, 0xb0, 0xf8,
 113           nsc_ircc_probe_338, nsc_ircc_init_338 },
 114         /* Contributed by Steffen Pingel - IBM X40 */
 115         { "PC8738x", { 0x164e, 0x4e, 0x2e }, 0x20, 0xf4, 0xff,
 116           nsc_ircc_probe_39x, nsc_ircc_init_39x },
 117         /* Contributed by Jan Frey - IBM A30/A31 */
 118         { "PC8739x", { 0x2e, 0x4e, 0x0 }, 0x20, 0xea, 0xff,
 119           nsc_ircc_probe_39x, nsc_ircc_init_39x },
 120         /* IBM ThinkPads using PC8738x (T60/X60/Z60) */
 121         { "IBM-PC8738x", { 0x2e, 0x4e, 0x0 }, 0x20, 0xf4, 0xff,
 122           nsc_ircc_probe_39x, nsc_ircc_init_39x },
 123         /* IBM ThinkPads using PC8394T (T43/R52/?) */
 124         { "IBM-PC8394T", { 0x2e, 0x4e, 0x0 }, 0x20, 0xf9, 0xff,
 125           nsc_ircc_probe_39x, nsc_ircc_init_39x },
 126         { NULL }
 127 };
 128
 129 static struct nsc_ircc_cb *dev_self[] = { NULL, NULL, NULL, NULL, NULL };
 130
 131 static char *dongle_types[] = {
 132         "Differential serial interface",
 133         "Differential serial interface",
 134         "Reserved",
 135         "Reserved",
 136         "Sharp RY5HD01",
 137         "Reserved",
 138         "Single-ended serial interface",
 139         "Consumer-IR only",
 140         "HP HSDL-2300, HP HSDL-3600/HSDL-3610",
 141         "IBM31T1100 or Temic TFDS6000/TFDS6500",
 142         "Reserved",
 143         "Reserved",
 144         "HP HSDL-1100/HSDL-2100",
 145         "HP HSDL-1100/HSDL-2100",
 146         "Supports SIR Mode only",
 147         "No dongle connected",
 148 };
 149
 150 /* PNP probing */
 151 static chipio_t pnp_info;
 152 static const struct pnp_device_id nsc_ircc_pnp_table[] = {
 153         { .id = "NSC6001", .driver_data = 0 },
 154         { .id = "IBM0071", .driver_data = 0 },
 155         { .id = "HWPC224", .driver_data = 0 },
 156         { }
 157 };
 158
 159 MODULE_DEVICE_TABLE(pnp, nsc_ircc_pnp_table);
 160
 161 static struct pnp_driver nsc_ircc_pnp_driver = {
 162 #ifdef CONFIG_PNP
 163         .name = "nsc-ircc",
 164         .id_table = nsc_ircc_pnp_table,
 165         .probe = nsc_ircc_pnp_probe,
 166 #endif
 167 };
 168
 169 /* Some prototypes */
 170 static int  nsc_ircc_open(chipio_t *info);
 171 static int  nsc_ircc_close(struct nsc_ircc_cb *self);
 172 static int  nsc_ircc_setup(chipio_t *info);
 173 static void nsc_ircc_pio_receive(struct nsc_ircc_cb *self);
 174 static int  nsc_ircc_dma_receive(struct nsc_ircc_cb *self);
 175 static int  nsc_ircc_dma_receive_complete(struct nsc_ircc_cb *self, int iobase);
 176 static int  nsc_ircc_hard_xmit_sir(struct sk_buff *skb, struct net_device *dev);
 177 static int  nsc_ircc_hard_xmit_fir(struct sk_buff *skb, struct net_device *dev);
 178 static int  nsc_ircc_pio_write(int iobase, __u8 *buf, int len, int fifo_size);
 179 static void nsc_ircc_dma_xmit(struct nsc_ircc_cb *self, int iobase);
 180 static __u8 nsc_ircc_change_speed(struct nsc_ircc_cb *self, __u32 baud);
 181 static int  nsc_ircc_is_receiving(struct nsc_ircc_cb *self);
 182 static int  nsc_ircc_read_dongle_id (int iobase);
 183 static void nsc_ircc_init_dongle_interface (int iobase, int dongle_id);
 184
 185 static int  nsc_ircc_net_open(struct net_device *dev);
 186 static int  nsc_ircc_net_close(struct net_device *dev);
 187 static int  nsc_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
 188 static struct net_device_stats *nsc_ircc_net_get_stats(struct net_device *dev);
 189
 190 /* Globals */
 191 static int pnp_registered;
 192 static int pnp_succeeded;
 193
 194 /*
 195  * Function nsc_ircc_init ()
 196  *
 197  *    Initialize chip. Just try to find out how many chips we are dealing with
 198  *    and where they are
 199  */
 200 static int __init nsc_ircc_init(void)
 201 {
 202         chipio_t info;
 203         nsc_chip_t *chip;
 204         int ret;
 205         int cfg_base;
 206         int cfg, id;
 207         int reg;
 208         int i = 0;
 209
 210         ret = platform_driver_register(&nsc_ircc_driver);
 211         if (ret) {
 212                 IRDA_ERROR("%s, Can't register driver!\n", driver_name);
 213                 return ret;
 214         }
 215
 216         /* Register with PnP subsystem to detect disable ports */
 217         ret = pnp_register_driver(&nsc_ircc_pnp_driver);
 218
 219         if (!ret)
 220                 pnp_registered = 1;
 221
 222         ret = -ENODEV;
 223
 224         /* Probe for all the NSC chipsets we know about */
 225         for (chip = chips; chip->name ; chip++) {
 226                 IRDA_DEBUG(2, "%s(), Probing for %s ...\n", __FUNCTION__,
 227                            chip->name);
 228
 229                 /* Try all config registers for this chip */
 230                 for (cfg = 0; cfg < ARRAY_SIZE(chip->cfg); cfg++) {
 231                         cfg_base = chip->cfg[cfg];
 232                         if (!cfg_base)
 233                                 continue;
 234
 235                         /* Read index register */
 236                         reg = inb(cfg_base);
 237                         if (reg == 0xff) {
 238                                 IRDA_DEBUG(2, "%s() no chip at 0x%03x\n", __FUNCTION__, cfg_base);
 239                                 continue;
 240                         }
 241
 242                         /* Read chip identification register */
 243                         outb(chip->cid_index, cfg_base);
 244                         id = inb(cfg_base+1);
 245                         if ((id & chip->cid_mask) == chip->cid_value) {
 246                                 IRDA_DEBUG(2, "%s() Found %s chip, revision=%d\n",
 247                                            __FUNCTION__, chip->name, id & ~chip->cid_mask);
 248
 249                                 /*
 250                                  * If we found a correct PnP setting,
 251                                  * we first try it.
 252                                  */
 253                                 if (pnp_succeeded) {
 254                                         memset(&info, 0, sizeof(chipio_t));
 255                                         info.cfg_base = cfg_base;
 256                                         info.fir_base = pnp_info.fir_base;
 257                                         info.dma = pnp_info.dma;
 258                                         info.irq = pnp_info.irq;
 259
 260                                         if (info.fir_base < 0x2000) {
 261                                                 IRDA_MESSAGE("%s, chip->init\n", driver_name);
 262                                                 chip->init(chip, &info);
 263                                         } else
 264                                                 chip->probe(chip, &info);
 265
 266                                         if (nsc_ircc_open(&info) >= 0)
 267                                                 ret = 0;
 268                                 }
 269
 270                                 /*
 271                                  * Opening based on PnP values failed.
 272                                  * Let's fallback to user values, or probe
 273                                  * the chip.
 274                                  */
 275                                 if (ret) {
 276                                         IRDA_DEBUG(2, "%s, PnP init failed\n", driver_name);
 277                                         memset(&info, 0, sizeof(chipio_t));
 278                                         info.cfg_base = cfg_base;
 279                                         info.fir_base = io[i];
 280                                         info.dma = dma[i];
 281                                         info.irq = irq[i];
 282
 283                                         /*
 284                                          * If the user supplies the base address, then
 285                                          * we init the chip, if not we probe the values
 286                                          * set by the BIOS
 287                                          */
 288                                         if (io[i] < 0x2000) {
 289                                                 chip->init(chip, &info);
 290                                         } else
 291                                                 chip->probe(chip, &info);
 292
 293                                         if (nsc_ircc_open(&info) >= 0)
 294                                                 ret = 0;
 295                                 }
 296                                 i++;
 297                         } else {
 298                                 IRDA_DEBUG(2, "%s(), Wrong chip id=0x%02x\n", __FUNCTION__, id);
 299                         }
 300                 }
 301         }
 302
 303         if (ret) {
 304                 platform_driver_unregister(&nsc_ircc_driver);
 305                 pnp_unregister_driver(&nsc_ircc_pnp_driver);
 306                 pnp_registered = 0;
 307         }
 308
 309         return ret;
 310 }
 311
 312 /*
 313  * Function nsc_ircc_cleanup ()
 314  *
 315  *    Close all configured chips
 316  *
 317  */
 318 static void __exit nsc_ircc_cleanup(void)
 319 {
 320         int i;
 321
 322         for (i = 0; i < ARRAY_SIZE(dev_self); i++) {
 323                 if (dev_self[i])
 324                         nsc_ircc_close(dev_self[i]);
 325         }
 326
 327         platform_driver_unregister(&nsc_ircc_driver);
 328
 329         if (pnp_registered)
 330                 pnp_unregister_driver(&nsc_ircc_pnp_driver);
 331
 332         pnp_registered = 0;
 333 }
 334
 335 /*
 336  * Function nsc_ircc_open (iobase, irq)
 337  *
 338  *    Open driver instance
 339  *
 340  */
 341 static int __init nsc_ircc_open(chipio_t *info)
 342 {
 343         struct net_device *dev;
 344         struct nsc_ircc_cb *self;
 345         void *ret;
 346         int err, chip_index;
 347
 348         IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
 349
 350
 351         for (chip_index = 0; chip_index < ARRAY_SIZE(dev_self); chip_index++) {
 352                 if (!dev_self[chip_index])
 353                         break;
 354         }
 355
 356         if (chip_index == ARRAY_SIZE(dev_self)) {
 357                 IRDA_ERROR("%s(), maximum number of supported chips reached!\n", __FUNCTION__);
 358                 return -ENOMEM;
 359         }
 360
 361         IRDA_MESSAGE("%s, Found chip at base=0x%03x\n", driver_name,
 362                      info->cfg_base);
 363
 364         if ((nsc_ircc_setup(info)) == -1)
 365                 return -1;
 366
 367         IRDA_MESSAGE("%s, driver loaded (Dag Brattli)\n", driver_name);
 368
 369         dev = alloc_irdadev(sizeof(struct nsc_ircc_cb));
 370         if (dev == NULL) {
 371                 IRDA_ERROR("%s(), can't allocate memory for "
 372                            "control block!\n", __FUNCTION__);
 373                 return -ENOMEM;
 374         }
 375
 376         self = dev->priv;
 377         self->netdev = dev;
 378         spin_lock_init(&self->lock);
 379
 380         /* Need to store self somewhere */
 381         dev_self[chip_index] = self;
 382         self->index = chip_index;
 383
 384         /* Initialize IO */
 385         self->io.cfg_base  = info->cfg_base;
 386         self->io.fir_base  = info->fir_base;
 387         self->io.irq       = info->irq;
 388         self->io.fir_ext   = CHIP_IO_EXTENT;
 389         self->io.dma       = info->dma;
 390         self->io.fifo_size = 32;
 391
 392         /* Reserve the ioports that we need */
 393         ret = request_region(self->io.fir_base, self->io.fir_ext, driver_name);
 394         if (!ret) {
 395                 IRDA_WARNING("%s(), can't get iobase of 0x%03x\n",
 396                              __FUNCTION__, self->io.fir_base);
 397                 err = -ENODEV;
 398                 goto out1;
 399         }
 400
 401         /* Initialize QoS for this device */
 402         irda_init_max_qos_capabilies(&self->qos);
 403
 404         /* The only value we must override it the baudrate */
 405         self->qos.baud_rate.bits = IR_9600|IR_19200|IR_38400|IR_57600|
 406                 IR_115200|IR_576000|IR_1152000 |(IR_4000000 << 8);
 407
 408         self->qos.min_turn_time.bits = qos_mtt_bits;
 409         irda_qos_bits_to_value(&self->qos);
 410
 411         /* Max DMA buffer size needed = (data_size + 6) * (window_size) + 6; */
 412         self->rx_buff.truesize = 14384;
 413         self->tx_buff.truesize = 14384;
 414
 415         /* Allocate memory if needed */
 416         self->rx_buff.head =
 417                 dma_alloc_coherent(NULL, self->rx_buff.truesize,
 418                                    &self->rx_buff_dma, GFP_KERNEL);
 419         if (self->rx_buff.head == NULL) {
 420                 err = -ENOMEM;
 421                 goto out2;
 422
 423         }
 424         memset(self->rx_buff.head, 0, self->rx_buff.truesize);
 425
 426         self->tx_buff.head =
 427                 dma_alloc_coherent(NULL, self->tx_buff.truesize,
 428                                    &self->tx_buff_dma, GFP_KERNEL);
 429         if (self->tx_buff.head == NULL) {
 430                 err = -ENOMEM;
 431                 goto out3;
 432         }
 433         memset(self->tx_buff.head, 0, self->tx_buff.truesize);
 434
 435         self->rx_buff.in_frame = FALSE;
 436         self->rx_buff.state = OUTSIDE_FRAME;
 437         self->tx_buff.data = self->tx_buff.head;
 438         self->rx_buff.data = self->rx_buff.head;
 439
 440         /* Reset Tx queue info */
 441         self->tx_fifo.len = self->tx_fifo.ptr = self->tx_fifo.free = 0;
 442         self->tx_fifo.tail = self->tx_buff.head;
 443
 444         /* Override the network functions we need to use */
 445         dev->hard_start_xmit = nsc_ircc_hard_xmit_sir;
 446         dev->open            = nsc_ircc_net_open;
 447         dev->stop            = nsc_ircc_net_close;
 448         dev->do_ioctl        = nsc_ircc_net_ioctl;
 449         dev->get_stats       = nsc_ircc_net_get_stats;
 450
 451         err = register_netdev(dev);
 452         if (err) {
 453                 IRDA_ERROR("%s(), register_netdev() failed!\n", __FUNCTION__);
 454                 goto out4;
 455         }
 456         IRDA_MESSAGE("IrDA: Registered device %s\n", dev->name);
 457
 458         /* Check if user has supplied a valid dongle id or not */
 459         if ((dongle_id <= 0) ||
 460             (dongle_id >= ARRAY_SIZE(dongle_types))) {
 461                 dongle_id = nsc_ircc_read_dongle_id(self->io.fir_base);
 462
 463                 IRDA_MESSAGE("%s, Found dongle: %s\n", driver_name,
 464                              dongle_types[dongle_id]);
 465         } else {
 466                 IRDA_MESSAGE("%s, Using dongle: %s\n", driver_name,
 467                              dongle_types[dongle_id]);
 468         }
 469
 470         self->io.dongle_id = dongle_id;
 471         nsc_ircc_init_dongle_interface(self->io.fir_base, dongle_id);
 472
 473         self->pldev = platform_device_register_simple(NSC_IRCC_DRIVER_NAME,
 474                                                       self->index, NULL, 0);
 475         if (IS_ERR(self->pldev)) {
 476                 err = PTR_ERR(self->pldev);
 477                 goto out5;
 478         }
 479         platform_set_drvdata(self->pldev, self);
 480
 481         return chip_index;
 482
 483  out5:
 484         unregister_netdev(dev);
 485  out4:
 486         dma_free_coherent(NULL, self->tx_buff.truesize,
 487                           self->tx_buff.head, self->tx_buff_dma);
 488  out3:
 489         dma_free_coherent(NULL, self->rx_buff.truesize,
 490                           self->rx_buff.head, self->rx_buff_dma);
 491  out2:
 492         release_region(self->io.fir_base, self->io.fir_ext);
 493  out1:
 494         free_netdev(dev);
 495         dev_self[chip_index] = NULL;
 496         return err;
 497 }
 498
 499 /*
 500  * Function nsc_ircc_close (self)
 501  *
 502  *    Close driver instance
 503  *
 504  */
 505 static int __exit nsc_ircc_close(struct nsc_ircc_cb *self)
 506 {
 507         int iobase;
 508
 509         IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
 510
 511         IRDA_ASSERT(self != NULL, return -1;);
 512
 513         iobase = self->io.fir_base;
 514
 515         platform_device_unregister(self->pldev);
 516
 517         /* Remove netdevice */
 518         unregister_netdev(self->netdev);
 519
 520         /* Release the PORT that this driver is using */
 521         IRDA_DEBUG(4, "%s(), Releasing Region %03x\n",
 522                    __FUNCTION__, self->io.fir_base);
 523         release_region(self->io.fir_base, self->io.fir_ext);
 524
 525         if (self->tx_buff.head)
 526                 dma_free_coherent(NULL, self->tx_buff.truesize,
 527                                   self->tx_buff.head, self->tx_buff_dma);
 528
 529         if (self->rx_buff.head)
 530                 dma_free_coherent(NULL, self->rx_buff.truesize,
 531                                   self->rx_buff.head, self->rx_buff_dma);
 532
 533         dev_self[self->index] = NULL;
 534         free_netdev(self->netdev);
 535
 536         return 0;
 537 }
 538
 539 /*
 540  * Function nsc_ircc_init_108 (iobase, cfg_base, irq, dma)
 541  *
 542  *    Initialize the NSC '108 chip
 543  *
 544  */
 545 static int nsc_ircc_init_108(nsc_chip_t *chip, chipio_t *info)
 546 {
 547         int cfg_base = info->cfg_base;
 548         __u8 temp=0;
 549
 550         outb(2, cfg_base);      /* Mode Control Register (MCTL) */
 551         outb(0x00, cfg_base+1); /* Disable device */
 552
 553         /* Base Address and Interrupt Control Register (BAIC) */
 554         outb(CFG_108_BAIC, cfg_base);
 555         switch (info->fir_base) {
 556         case 0x3e8: outb(0x14, cfg_base+1); break;
 557         case 0x2e8: outb(0x15, cfg_base+1); break;
 558         case 0x3f8: outb(0x16, cfg_base+1); break;
 559         case 0x2f8: outb(0x17, cfg_base+1); break;
 560         default: IRDA_ERROR("%s(), invalid base_address", __FUNCTION__);
 561         }
 562
 563         /* Control Signal Routing Register (CSRT) */
 564         switch (info->irq) {
 565         case 3:  temp = 0x01; break;
 566         case 4:  temp = 0x02; break;
 567         case 5:  temp = 0x03; break;
 568         case 7:  temp = 0x04; break;
 569         case 9:  temp = 0x05; break;
 570         case 11: temp = 0x06; break;
 571         case 15: temp = 0x07; break;
 572         default: IRDA_ERROR("%s(), invalid irq", __FUNCTION__);
 573         }
 574         outb(CFG_108_CSRT, cfg_base);
 575
 576         switch (info->dma) {
 577         case 0: outb(0x08+temp, cfg_base+1); break;
 578         case 1: outb(0x10+temp, cfg_base+1); break;
 579         case 3: outb(0x18+temp, cfg_base+1); break;
 580         default: IRDA_ERROR("%s(), invalid dma", __FUNCTION__);
 581         }
 582
 583         outb(CFG_108_MCTL, cfg_base);      /* Mode Control Register (MCTL) */
 584         outb(0x03, cfg_base+1); /* Enable device */
 585
 586         return 0;
 587 }
 588
 589 /*
 590  * Function nsc_ircc_probe_108 (chip, info)
 591  *
 592  *
 593  *
 594  */
 595 static int nsc_ircc_probe_108(nsc_chip_t *chip, chipio_t *info)
 596 {
 597         int cfg_base = info->cfg_base;
 598         int reg;
 599
 600         /* Read address and interrupt control register (BAIC) */
 601         outb(CFG_108_BAIC, cfg_base);
 602         reg = inb(cfg_base+1);
 603
 604         switch (reg & 0x03) {
 605         case 0:
 606                 info->fir_base = 0x3e8;
 607                 break;
 608         case 1:
 609                 info->fir_base = 0x2e8;
 610                 break;
 611         case 2:
 612                 info->fir_base = 0x3f8;
 613                 break;
 614         case 3:
 615                 info->fir_base = 0x2f8;
 616                 break;
 617         }
 618         info->sir_base = info->fir_base;
 619         IRDA_DEBUG(2, "%s(), probing fir_base=0x%03x\n", __FUNCTION__,
 620                    info->fir_base);
 621
 622         /* Read control signals routing register (CSRT) */
 623         outb(CFG_108_CSRT, cfg_base);
 624         reg = inb(cfg_base+1);
 625
 626         switch (reg & 0x07) {
 627         case 0:
 628                 info->irq = -1;
 629                 break;
 630         case 1:
 631                 info->irq = 3;
 632                 break;
 633         case 2:
 634                 info->irq = 4;
 635                 break;
 636         case 3:
 637                 info->irq = 5;
 638                 break;
 639         case 4:
 640                 info->irq = 7;
 641                 break;
 642         case 5:
 643                 info->irq = 9;
 644                 break;
 645         case 6:
 646                 info->irq = 11;
 647                 break;
 648         case 7:
 649                 info->irq = 15;
 650                 break;
 651         }
 652         IRDA_DEBUG(2, "%s(), probing irq=%d\n", __FUNCTION__, info->irq);
 653
 654         /* Currently we only read Rx DMA but it will also be used for Tx */
 655         switch ((reg >> 3) & 0x03) {
 656         case 0:
 657                 info->dma = -1;
 658                 break;
 659         case 1:
 660                 info->dma = 0;
 661                 break;
 662         case 2:
 663                 info->dma = 1;
 664                 break;
 665         case 3:
 666                 info->dma = 3;
 667                 break;
 668         }
 669         IRDA_DEBUG(2, "%s(), probing dma=%d\n", __FUNCTION__, info->dma);
 670
 671         /* Read mode control register (MCTL) */
 672         outb(CFG_108_MCTL, cfg_base);
 673         reg = inb(cfg_base+1);
 674
 675         info->enabled = reg & 0x01;
 676         info->suspended = !((reg >> 1) & 0x01);
 677
 678         return 0;
 679 }
 680
 681 /*
 682  * Function nsc_ircc_init_338 (chip, info)
 683  *
 684  *    Initialize the NSC '338 chip. Remember that the 87338 needs two
 685  *    consecutive writes to the data registers while CPU interrupts are
 686  *    disabled. The 97338 does not require this, but shouldn't be any
 687  *    harm if we do it anyway.
 688  */
 689 static int nsc_ircc_init_338(nsc_chip_t *chip, chipio_t *info)
 690 {
 691         /* No init yet */
 692
 693         return 0;
 694 }
 695
 696 /*
 697  * Function nsc_ircc_probe_338 (chip, info)
 698  *
 699  *
 700  *
 701  */
 702 static int nsc_ircc_probe_338(nsc_chip_t *chip, chipio_t *info)
 703 {
 704         int cfg_base = info->cfg_base;
 705         int reg, com = 0;
 706         int pnp;
 707
 708         /* Read funtion enable register (FER) */
 709         outb(CFG_338_FER, cfg_base);
 710         reg = inb(cfg_base+1);
 711
 712         info->enabled = (reg >> 2) & 0x01;
 713
 714         /* Check if we are in Legacy or PnP mode */
 715         outb(CFG_338_PNP0, cfg_base);
 716         reg = inb(cfg_base+1);
 717
 718         pnp = (reg >> 3) & 0x01;
 719         if (pnp) {
 720                 IRDA_DEBUG(2, "(), Chip is in PnP mode\n");
 721                 outb(0x46, cfg_base);
 722                 reg = (inb(cfg_base+1) & 0xfe) << 2;
 723
 724                 outb(0x47, cfg_base);
 725                 reg |= ((inb(cfg_base+1) & 0xfc) << 8);
 726
 727                 info->fir_base = reg;
 728         } else {
 729                 /* Read function address register (FAR) */
 730                 outb(CFG_338_FAR, cfg_base);
 731                 reg = inb(cfg_base+1);
 732
 733                 switch ((reg >> 4) & 0x03) {
 734                 case 0:
 735                         info->fir_base = 0x3f8;
 736                         break;
 737                 case 1:
 738                         info->fir_base = 0x2f8;
 739                         break;
 740                 case 2:
 741                         com = 3;
 742                         break;
 743                 case 3:
 744                         com = 4;
 745                         break;
 746                 }
 747
 748                 if (com) {
 749                         switch ((reg >> 6) & 0x03) {
 750                         case 0:
 751                                 if (com == 3)
 752                                         info->fir_base = 0x3e8;
 753                                 else
 754                                         info->fir_base = 0x2e8;
 755                                 break;
 756                         case 1:
 757                                 if (com == 3)
 758                                         info->fir_base = 0x338;
 759                                 else
 760                                         info->fir_base = 0x238;
 761                                 break;
 762                         case 2:
 763                                 if (com == 3)
 764                                         info->fir_base = 0x2e8;
 765                                 else
 766                                         info->fir_base = 0x2e0;
 767                                 break;
 768                         case 3:
 769                                 if (com == 3)
 770                                         info->fir_base = 0x220;
 771                                 else
 772                                         info->fir_base = 0x228;
 773                                 break;
 774                         }
 775                 }
 776         }
 777         info->sir_base = info->fir_base;
 778
 779         /* Read PnP register 1 (PNP1) */
 780         outb(CFG_338_PNP1, cfg_base);
 781         reg = inb(cfg_base+1);
 782
 783         info->irq = reg >> 4;
 784
 785         /* Read PnP register 3 (PNP3) */
 786         outb(CFG_338_PNP3, cfg_base);
 787         reg = inb(cfg_base+1);
 788
 789         info->dma = (reg & 0x07) - 1;
 790
 791         /* Read power and test register (PTR) */
 792         outb(CFG_338_PTR, cfg_base);
 793         reg = inb(cfg_base+1);
 794
 795         info->suspended = reg & 0x01;
 796
 797         return 0;
 798 }
 799
 800
 801 /*
 802  * Function nsc_ircc_init_39x (chip, info)
 803  *
 804  *    Now that we know it's a '39x (see probe below), we need to
 805  *    configure it so we can use it.
 806  *
 807  * The NSC '338 chip is a Super I/O chip with a "bank" architecture,
 808  * the configuration of the different functionality (serial, parallel,
 809  * floppy...) are each in a different bank (Logical Device Number).
 810  * The base address, irq and dma configuration registers are common
 811  * to all functionalities (index 0x30 to 0x7F).
 812  * There is only one configuration register specific to the
 813  * serial port, CFG_39X_SPC.
 814  * JeanII
 815  *
 816  * Note : this code was written by Jan Frey <janfrey@web.de>
 817  */
 818 static int nsc_ircc_init_39x(nsc_chip_t *chip, chipio_t *info)
 819 {
 820         int cfg_base = info->cfg_base;
 821         int enabled;
 822
 823         /* User is sure about his config... accept it. */
 824         IRDA_DEBUG(2, "%s(): nsc_ircc_init_39x (user settings): "
 825                    "io=0x%04x, irq=%d, dma=%d\n",
 826                    __FUNCTION__, info->fir_base, info->irq, info->dma);
 827
 828         /* Access bank for SP2 */
 829         outb(CFG_39X_LDN, cfg_base);
 830         outb(0x02, cfg_base+1);
 831
 832         /* Configure SP2 */
 833
 834         /* We want to enable the device if not enabled */
 835         outb(CFG_39X_ACT, cfg_base);
 836         enabled = inb(cfg_base+1) & 0x01;
 837
 838         if (!enabled) {
 839                 /* Enable the device */
 840                 outb(CFG_39X_SIOCF1, cfg_base);
 841                 outb(0x01, cfg_base+1);
 842                 /* May want to update info->enabled. Jean II */
 843         }
 844
 845         /* Enable UART bank switching (bit 7) ; Sets the chip to normal
 846          * power mode (wake up from sleep mode) (bit 1) */
 847         outb(CFG_39X_SPC, cfg_base);
 848         outb(0x82, cfg_base+1);
 849
 850         return 0;
 851 }
 852
 853 /*
 854  * Function nsc_ircc_probe_39x (chip, info)
 855  *
 856  *    Test if we really have a '39x chip at the given address
 857  *
 858  * Note : this code was written by Jan Frey <janfrey@web.de>
 859  */
 860 static int nsc_ircc_probe_39x(nsc_chip_t *chip, chipio_t *info)
 861 {
 862         int cfg_base = info->cfg_base;
 863         int reg1, reg2, irq, irqt, dma1, dma2;
 864         int enabled, susp;
 865
 866         IRDA_DEBUG(2, "%s(), nsc_ircc_probe_39x, base=%d\n",
 867                    __FUNCTION__, cfg_base);
 868
 869         /* This function should be executed with irq off to avoid
 870          * another driver messing with the Super I/O bank - Jean II */
 871
 872         /* Access bank for SP2 */
 873         outb(CFG_39X_LDN, cfg_base);
 874         outb(0x02, cfg_base+1);
 875
 876         /* Read infos about SP2 ; store in info struct */
 877         outb(CFG_39X_BASEH, cfg_base);
 878         reg1 = inb(cfg_base+1);
 879         outb(CFG_39X_BASEL, cfg_base);
 880         reg2 = inb(cfg_base+1);
 881         info->fir_base = (reg1 << 8) | reg2;
 882
 883         outb(CFG_39X_IRQNUM, cfg_base);
 884         irq = inb(cfg_base+1);
 885         outb(CFG_39X_IRQSEL, cfg_base);
 886         irqt = inb(cfg_base+1);
 887         info->irq = irq;
 888
 889         outb(CFG_39X_DMA0, cfg_base);
 890         dma1 = inb(cfg_base+1);
 891         outb(CFG_39X_DMA1, cfg_base);
 892         dma2 = inb(cfg_base+1);
 893         info->dma = dma1 -1;
 894
 895         outb(CFG_39X_ACT, cfg_base);
 896         info->enabled = enabled = inb(cfg_base+1) & 0x01;
 897
 898         outb(CFG_39X_SPC, cfg_base);
 899         susp = 1 - ((inb(cfg_base+1) & 0x02) >> 1);
 900
 901         IRDA_DEBUG(2, "%s(): io=0x%02x%02x, irq=%d (type %d), rxdma=%d, txdma=%d, enabled=%d (suspended=%d)\n", __FUNCTION__, reg1,reg2,irq,irqt,dma1,dma2,enabled,susp);
 902
 903         /* Configure SP2 */
 904
 905         /* We want to enable the device if not enabled */
 906         outb(CFG_39X_ACT, cfg_base);
 907         enabled = inb(cfg_base+1) & 0x01;
 908
 909         if (!enabled) {
 910                 /* Enable the device */
 911                 outb(CFG_39X_SIOCF1, cfg_base);
 912                 outb(0x01, cfg_base+1);
 913                 /* May want to update info->enabled. Jean II */
 914         }
 915
 916         /* Enable UART bank switching (bit 7) ; Sets the chip to normal
 917          * power mode (wake up from sleep mode) (bit 1) */
 918         outb(CFG_39X_SPC, cfg_base);
 919         outb(0x82, cfg_base+1);
 920
 921         return 0;
 922 }
 923
 924 #ifdef CONFIG_PNP
 925 /* PNP probing */
 926 static int nsc_ircc_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *id)
 927 {
 928         memset(&pnp_info, 0, sizeof(chipio_t));
 929         pnp_info.irq = -1;
 930         pnp_info.dma = -1;
 931         pnp_succeeded = 1;
 932
 933         /* There don't seem to be any way to get the cfg_base.
 934          * On my box, cfg_base is in the PnP descriptor of the
 935          * motherboard. Oh well... Jean II */
 936
 937         if (pnp_port_valid(dev, 0) &&
 938                 !(pnp_port_flags(dev, 0) & IORESOURCE_DISABLED))
 939                 pnp_info.fir_base = pnp_port_start(dev, 0);
 940
 941         if (pnp_irq_valid(dev, 0) &&
 942                 !(pnp_irq_flags(dev, 0) & IORESOURCE_DISABLED))
 943                 pnp_info.irq = pnp_irq(dev, 0);
 944
 945         if (pnp_dma_valid(dev, 0) &&
 946                 !(pnp_dma_flags(dev, 0) & IORESOURCE_DISABLED))
 947                 pnp_info.dma = pnp_dma(dev, 0);
 948
 949         IRDA_DEBUG(0, "%s() : From PnP, found firbase 0x%03X ; irq %d ; dma %d.\n",
 950                    __FUNCTION__, pnp_info.fir_base, pnp_info.irq, pnp_info.dma);
 951
 952         if((pnp_info.fir_base == 0) ||
 953            (pnp_info.irq == -1) || (pnp_info.dma == -1)) {
 954                 /* Returning an error will disable the device. Yuck ! */
 955                 //return -EINVAL;
 956                 pnp_succeeded = 0;
 957         }
 958
 959         return 0;
 960 }
 961 #endif
 962
 963 /*
 964  * Function nsc_ircc_setup (info)
 965  *
 966  *    Returns non-negative on success.
 967  *
 968  */
 969 static int nsc_ircc_setup(chipio_t *info)
 970 {
 971         int version;
 972         int iobase = info->fir_base;
 973
 974         /* Read the Module ID */
 975         switch_bank(iobase, BANK3);
 976         version = inb(iobase+MID);
 977
 978         IRDA_DEBUG(2, "%s() Driver %s Found chip version %02x\n",
 979                    __FUNCTION__, driver_name, version);
 980
 981         /* Should be 0x2? */
 982         if (0x20 != (version & 0xf0)) {
 983                 IRDA_ERROR("%s, Wrong chip version %02x\n",
 984                            driver_name, version);
 985                 return -1;
 986         }
 987
 988         /* Switch to advanced mode */
 989         switch_bank(iobase, BANK2);
 990         outb(ECR1_EXT_SL, iobase+ECR1);
 991         switch_bank(iobase, BANK0);
 992
 993         /* Set FIFO threshold to TX17, RX16, reset and enable FIFO's */
 994         switch_bank(iobase, BANK0);
 995         outb(FCR_RXTH|FCR_TXTH|FCR_TXSR|FCR_RXSR|FCR_FIFO_EN, iobase+FCR);
 996
 997         outb(0x03, iobase+LCR);         /* 8 bit word length */
 998         outb(MCR_SIR, iobase+MCR);      /* Start at SIR-mode, also clears LSR*/
 999
1000         /* Set FIFO size to 32 */
1001         switch_bank(iobase, BANK2);
1002         outb(EXCR2_RFSIZ|EXCR2_TFSIZ, iobase+EXCR2);
1003
1004         /* IRCR2: FEND_MD is not set */
1005         switch_bank(iobase, BANK5);
1006         outb(0x02, iobase+4);
1007
1008         /* Make sure that some defaults are OK */
1009         switch_bank(iobase, BANK6);
1010         outb(0x20, iobase+0); /* Set 32 bits FIR CRC */
1011         outb(0x0a, iobase+1); /* Set MIR pulse width */
1012         outb(0x0d, iobase+2); /* Set SIR pulse width to 1.6us */
1013         outb(0x2a, iobase+4); /* Set beginning frag, and preamble length */
1014
1015         /* Enable receive interrupts */
1016         switch_bank(iobase, BANK0);
1017         outb(IER_RXHDL_IE, iobase+IER);
1018
1019         return 0;
1020 }
1021
1022 /*
1023  * Function nsc_ircc_read_dongle_id (void)
1024  *
1025  * Try to read dongle indentification. This procedure needs to be executed
1026  * once after power-on/reset. It also needs to be used whenever you suspect
1027  * that the user may have plugged/unplugged the IrDA Dongle.
1028  */
1029 static int nsc_ircc_read_dongle_id (int iobase)
1030 {
1031         int dongle_id;
1032         __u8 bank;
1033
1034         bank = inb(iobase+BSR);
1035
1036         /* Select Bank 7 */
1037         switch_bank(iobase, BANK7);
1038
1039         /* IRCFG4: IRSL0_DS and IRSL21_DS are cleared */
1040         outb(0x00, iobase+7);
1041
1042         /* ID0, 1, and 2 are pulled up/down very slowly */
1043         udelay(50);
1044
1045         /* IRCFG1: read the ID bits */
1046         dongle_id = inb(iobase+4) & 0x0f;
1047
1048 #ifdef BROKEN_DONGLE_ID
1049         if (dongle_id == 0x0a)
1050                 dongle_id = 0x09;
1051 #endif
1052         /* Go back to  bank 0 before returning */
1053         switch_bank(iobase, BANK0);
1054
1055         outb(bank, iobase+BSR);
1056
1057         return dongle_id;
1058 }
1059
1060 /*
1061  * Function nsc_ircc_init_dongle_interface (iobase, dongle_id)
1062  *
1063  *     This function initializes the dongle for the transceiver that is
1064  *     used. This procedure needs to be executed once after
1065  *     power-on/reset. It also needs to be used whenever you suspect that
1066  *     the dongle is changed.
1067  */
1068 static void nsc_ircc_init_dongle_interface (int iobase, int dongle_id)
1069 {
1070         int bank;
1071
1072         /* Save current bank */
1073         bank = inb(iobase+BSR);
1074
1075         /* Select Bank 7 */
1076         switch_bank(iobase, BANK7);
1077
1078         /* IRCFG4: set according to dongle_id */
1079         switch (dongle_id) {
1080         case 0x00: /* same as */
1081         case 0x01: /* Differential serial interface */
1082                 IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
1083                            __FUNCTION__, dongle_types[dongle_id]);
1084                 break;
1085         case 0x02: /* same as */
1086         case 0x03: /* Reserved */
1087                 IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
1088                            __FUNCTION__, dongle_types[dongle_id]);
1089                 break;
1090         case 0x04: /* Sharp RY5HD01 */
1091                 break;
1092         case 0x05: /* Reserved, but this is what the Thinkpad reports */
1093                 IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
1094                            __FUNCTION__, dongle_types[dongle_id]);
1095                 break;
1096         case 0x06: /* Single-ended serial interface */
1097                 IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
1098                            __FUNCTION__, dongle_types[dongle_id]);
1099                 break;
1100         case 0x07: /* Consumer-IR only */
1101                 IRDA_DEBUG(0, "%s(), %s is not for IrDA mode\n",
1102                            __FUNCTION__, dongle_types[dongle_id]);
1103                 break;
1104         case 0x08: /* HP HSDL-2300, HP HSDL-3600/HSDL-3610 */
1105                 IRDA_DEBUG(0, "%s(), %s\n",
1106                            __FUNCTION__, dongle_types[dongle_id]);
1107                 break;
1108         case 0x09: /* IBM31T1100 or Temic TFDS6000/TFDS6500 */
1109                 outb(0x28, iobase+7); /* Set irsl[0-2] as output */
1110                 break;
1111         case 0x0A: /* same as */
1112         case 0x0B: /* Reserved */
1113                 IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
1114                            __FUNCTION__, dongle_types[dongle_id]);
1115                 break;
1116         case 0x0C: /* same as */
1117         case 0x0D: /* HP HSDL-1100/HSDL-2100 */
1118                 /*
1119                  * Set irsl0 as input, irsl[1-2] as output, and separate
1120                  * inputs are used for SIR and MIR/FIR
1121                  */
1122                 outb(0x48, iobase+7);
1123                 break;
1124         case 0x0E: /* Supports SIR Mode only */
1125                 outb(0x28, iobase+7); /* Set irsl[0-2] as output */
1126                 break;
1127         case 0x0F: /* No dongle connected */
1128                 IRDA_DEBUG(0, "%s(), %s\n",
1129                            __FUNCTION__, dongle_types[dongle_id]);
1130
1131                 switch_bank(iobase, BANK0);
1132                 outb(0x62, iobase+MCR);
1133                 break;
1134         default:
1135                 IRDA_DEBUG(0, "%s(), invalid dongle_id %#x",
1136                            __FUNCTION__, dongle_id);
1137         }
1138
1139         /* IRCFG1: IRSL1 and 2 are set to IrDA mode */
1140         outb(0x00, iobase+4);
1141
1142         /* Restore bank register */
1143         outb(bank, iobase+BSR);
1144
1145 } /* set_up_dongle_interface */
1146
1147 /*
1148  * Function nsc_ircc_change_dongle_speed (iobase, speed, dongle_id)
1149  *
1150  *    Change speed of the attach dongle
1151  *
1152  */
1153 static void nsc_ircc_change_dongle_speed(int iobase, int speed, int dongle_id)
1154 {
1155         __u8 bank;
1156
1157         /* Save current bank */
1158         bank = inb(iobase+BSR);
1159
1160         /* Select Bank 7 */
1161         switch_bank(iobase, BANK7);
1162
1163         /* IRCFG1: set according to dongle_id */
1164         switch (dongle_id) {
1165         case 0x00: /* same as */
1166         case 0x01: /* Differential serial interface */
1167                 IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
1168                            __FUNCTION__, dongle_types[dongle_id]);
1169                 break;
1170         case 0x02: /* same as */
1171         case 0x03: /* Reserved */
1172                 IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
1173                            __FUNCTION__, dongle_types[dongle_id]);
1174                 break;
1175         case 0x04: /* Sharp RY5HD01 */
1176                 break;
1177         case 0x05: /* Reserved */
1178                 IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
1179                            __FUNCTION__, dongle_types[dongle_id]);
1180                 break;
1181         case 0x06: /* Single-ended serial interface */
1182                 IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
1183                            __FUNCTION__, dongle_types[dongle_id]);
1184                 break;
1185         case 0x07: /* Consumer-IR only */
1186                 IRDA_DEBUG(0, "%s(), %s is not for IrDA mode\n",
1187                            __FUNCTION__, dongle_types[dongle_id]);
1188                 break;
1189         case 0x08: /* HP HSDL-2300, HP HSDL-3600/HSDL-3610 */
1190                 IRDA_DEBUG(0, "%s(), %s\n",
1191                            __FUNCTION__, dongle_types[dongle_id]);
1192                 outb(0x00, iobase+4);
1193                 if (speed > 115200)
1194                         outb(0x01, iobase+4);
1195                 break;
1196         case 0x09: /* IBM31T1100 or Temic TFDS6000/TFDS6500 */
1197                 outb(0x01, iobase+4);
1198
1199                 if (speed == 4000000) {
1200                         /* There was a cli() there, but we now are already
1201                          * under spin_lock_irqsave() - JeanII */
1202                         outb(0x81, iobase+4);
1203                         outb(0x80, iobase+4);
1204                 } else
1205                         outb(0x00, iobase+4);
1206                 break;
1207         case 0x0A: /* same as */
1208         case 0x0B: /* Reserved */
1209                 IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
1210                            __FUNCTION__, dongle_types[dongle_id]);
1211                 break;
1212         case 0x0C: /* same as */
1213         case 0x0D: /* HP HSDL-1100/HSDL-2100 */
1214                 break;
1215         case 0x0E: /* Supports SIR Mode only */
1216                 break;
1217         case 0x0F: /* No dongle connected */
1218                 IRDA_DEBUG(0, "%s(), %s is not for IrDA mode\n",
1219                            __FUNCTION__, dongle_types[dongle_id]);
1220
1221                 switch_bank(iobase, BANK0);
1222                 outb(0x62, iobase+MCR);
1223                 break;
1224         default:
1225                 IRDA_DEBUG(0, "%s(), invalid data_rate\n", __FUNCTION__);
1226         }
1227         /* Restore bank register */
1228         outb(bank, iobase+BSR);
1229 }
1230
1231 /*
1232  * Function nsc_ircc_change_speed (self, baud)
1233  *
1234  *    Change the speed of the device
1235  *
1236  * This function *must* be called with irq off and spin-lock.
1237  */
1238 static __u8 nsc_ircc_change_speed(struct nsc_ircc_cb *self, __u32 speed)
1239 {
1240         struct net_device *dev = self->netdev;
1241         __u8 mcr = MCR_SIR;
1242         int iobase;
1243         __u8 bank;
1244         __u8 ier;                  /* Interrupt enable register */
1245
1246         IRDA_DEBUG(2, "%s(), speed=%d\n", __FUNCTION__, speed);
1247
1248         IRDA_ASSERT(self != NULL, return 0;);
1249
1250         iobase = self->io.fir_base;
1251
1252         /* Update accounting for new speed */
1253         self->io.speed = speed;
1254
1255         /* Save current bank */
1256         bank = inb(iobase+BSR);
1257
1258         /* Disable interrupts */
1259         switch_bank(iobase, BANK0);
1260         outb(0, iobase+IER);
1261
1262         /* Select Bank 2 */
1263         switch_bank(iobase, BANK2);
1264
1265         outb(0x00, iobase+BGDH);
1266         switch (speed) {
1267         case 9600:   outb(0x0c, iobase+BGDL); break;
1268         case 19200:  outb(0x06, iobase+BGDL); break;
1269         case 38400:  outb(0x03, iobase+BGDL); break;
1270         case 57600:  outb(0x02, iobase+BGDL); break;
1271         case 115200: outb(0x01, iobase+BGDL); break;
1272         case 576000:
1273                 switch_bank(iobase, BANK5);
1274
1275                 /* IRCR2: MDRS is set */
1276                 outb(inb(iobase+4) | 0x04, iobase+4);
1277
1278                 mcr = MCR_MIR;
1279                 IRDA_DEBUG(0, "%s(), handling baud of 576000\n", __FUNCTION__);
1280                 break;
1281         case 1152000:
1282                 mcr = MCR_MIR;
1283                 IRDA_DEBUG(0, "%s(), handling baud of 1152000\n", __FUNCTION__);
1284                 break;
1285         case 4000000:
1286                 mcr = MCR_FIR;
1287                 IRDA_DEBUG(0, "%s(), handling baud of 4000000\n", __FUNCTION__);
1288                 break;
1289         default:
1290                 mcr = MCR_FIR;
1291                 IRDA_DEBUG(0, "%s(), unknown baud rate of %d\n",
1292                            __FUNCTION__, speed);
1293                 break;
1294         }
1295
1296         /* Set appropriate speed mode */
1297         switch_bank(iobase, BANK0);
1298         outb(mcr | MCR_TX_DFR, iobase+MCR);
1299
1300         /* Give some hits to the transceiver */
1301         nsc_ircc_change_dongle_speed(iobase, speed, self->io.dongle_id);
1302
1303         /* Set FIFO threshold to TX17, RX16 */
1304         switch_bank(iobase, BANK0);
1305         outb(0x00, iobase+FCR);
1306         outb(FCR_FIFO_EN, iobase+FCR);
1307         outb(FCR_RXTH|     /* Set Rx FIFO threshold */
1308              FCR_TXTH|     /* Set Tx FIFO threshold */
1309              FCR_TXSR|     /* Reset Tx FIFO */
1310              FCR_RXSR|     /* Reset Rx FIFO */
1311              FCR_FIFO_EN,  /* Enable FIFOs */
1312              iobase+FCR);
1313
1314         /* Set FIFO size to 32 */
1315         switch_bank(iobase, BANK2);
1316         outb(EXCR2_RFSIZ|EXCR2_TFSIZ, iobase+EXCR2);
1317
1318         /* Enable some interrupts so we can receive frames */
1319         switch_bank(iobase, BANK0);
1320         if (speed > 115200) {
1321                 /* Install FIR xmit handler */
1322                 dev->hard_start_xmit = nsc_ircc_hard_xmit_fir;
1323                 ier = IER_SFIF_IE;
1324                 nsc_ircc_dma_receive(self);
1325         } else {
1326                 /* Install SIR xmit handler */
1327                 dev->hard_start_xmit = nsc_ircc_hard_xmit_sir;
1328                 ier = IER_RXHDL_IE;
1329         }
1330         /* Set our current interrupt mask */
1331         outb(ier, iobase+IER);
1332
1333         /* Restore BSR */
1334         outb(bank, iobase+BSR);
1335
1336         /* Make sure interrupt handlers keep the proper interrupt mask */
1337         return(ier);
1338 }
1339
1340 /*
1341  * Function nsc_ircc_hard_xmit (skb, dev)
1342  *
1343  *    Transmit the frame!
1344  *
1345  */
1346 static int nsc_ircc_hard_xmit_sir(struct sk_buff *skb, struct net_device *dev)
1347 {
1348         struct nsc_ircc_cb *self;
1349         unsigned long flags;
1350         int iobase;
1351         __s32 speed;
1352         __u8 bank;
1353
1354         self = (struct nsc_ircc_cb *) dev->priv;
1355
1356         IRDA_ASSERT(self != NULL, return 0;);
1357
1358         iobase = self->io.fir_base;
1359
1360         netif_stop_queue(dev);
1361
1362         /* Make sure tests *& speed change are atomic */
1363         spin_lock_irqsave(&self->lock, flags);
1364
1365         /* Check if we need to change the speed */
1366         speed = irda_get_next_speed(skb);
1367         if ((speed != self->io.speed) && (speed != -1)) {
1368                 /* Check for empty frame. */
1369                 if (!skb->len) {
1370                         /* If we just sent a frame, we get called before
1371                          * the last bytes get out (because of the SIR FIFO).
1372                          * If this is the case, let interrupt handler change
1373                          * the speed itself... Jean II */
1374                         if (self->io.direction == IO_RECV) {
1375                                 nsc_ircc_change_speed(self, speed);
1376                                 /* TODO : For SIR->SIR, the next packet
1377                                  * may get corrupted - Jean II */
1378                                 netif_wake_queue(dev);
1379                         } else {
1380                                 self->new_speed = speed;
1381                                 /* Queue will be restarted after speed change
1382                                  * to make sure packets gets through the
1383                                  * proper xmit handler - Jean II */
1384                         }
1385                         dev->trans_start = jiffies;
1386                         spin_unlock_irqrestore(&self->lock, flags);
1387                         dev_kfree_skb(skb);
1388                         return 0;
1389                 } else
1390                         self->new_speed = speed;
1391         }
1392
1393         /* Save current bank */
1394         bank = inb(iobase+BSR);
1395
1396         self->tx_buff.data = self->tx_buff.head;
1397
1398         self->tx_buff.len = async_wrap_skb(skb, self->tx_buff.data,
1399                                            self->tx_buff.truesize);
1400
1401         self->stats.tx_bytes += self->tx_buff.len;
1402
1403         /* Add interrupt on tx low level (will fire immediately) */
1404         switch_bank(iobase, BANK0);
1405         outb(IER_TXLDL_IE, iobase+IER);
1406
1407         /* Restore bank register */
1408         outb(bank, iobase+BSR);
1409
1410         dev->trans_start = jiffies;
1411         spin_unlock_irqrestore(&self->lock, flags);
1412
1413         dev_kfree_skb(skb);
1414
1415         return 0;
1416 }
1417
1418 static int nsc_ircc_hard_xmit_fir(struct sk_buff *skb, struct net_device *dev)
1419 {
1420         struct nsc_ircc_cb *self;
1421         unsigned long flags;
1422         int iobase;
1423         __s32 speed;
1424         __u8 bank;
1425         int mtt, diff;
1426
1427         self = (struct nsc_ircc_cb *) dev->priv;
1428         iobase = self->io.fir_base;
1429
1430         netif_stop_queue(dev);
1431
1432         /* Make sure tests *& speed change are atomic */
1433         spin_lock_irqsave(&self->lock, flags);
1434
1435         /* Check if we need to change the speed */
1436         speed = irda_get_next_speed(skb);
1437         if ((speed != self->io.speed) && (speed != -1)) {
1438                 /* Check for empty frame. */
1439                 if (!skb->len) {
1440                         /* If we are currently transmitting, defer to
1441                          * interrupt handler. - Jean II */
1442                         if(self->tx_fifo.len == 0) {
1443                                 nsc_ircc_change_speed(self, speed);
1444                                 netif_wake_queue(dev);
1445                         } else {
1446                                 self->new_speed = speed;
1447                                 /* Keep queue stopped :
1448                                  * the speed change operation may change the
1449                                  * xmit handler, and we want to make sure
1450                                  * the next packet get through the proper
1451                                  * Tx path, so block the Tx queue until
1452                                  * the speed change has been done.
1453                                  * Jean II */
1454                         }
1455                         dev->trans_start = jiffies;
1456                         spin_unlock_irqrestore(&self->lock, flags);
1457                         dev_kfree_skb(skb);
1458                         return 0;
1459                 } else {
1460                         /* Change speed after current frame */
1461                         self->new_speed = speed;
1462                 }
1463         }
1464
1465         /* Save current bank */
1466         bank = inb(iobase+BSR);
1467
1468         /* Register and copy this frame to DMA memory */
1469         self->tx_fifo.queue[self->tx_fifo.free].start = self->tx_fifo.tail;
1470         self->tx_fifo.queue[self->tx_fifo.free].len = skb->len;
1471         self->tx_fifo.tail += skb->len;
1472
1473         self->stats.tx_bytes += skb->len;
1474
1475         skb_copy_from_linear_data(skb, self->tx_fifo.queue[self->tx_fifo.free].start,
1476                       skb->len);
1477         self->tx_fifo.len++;
1478         self->tx_fifo.free++;
1479
1480         /* Start transmit only if there is currently no transmit going on */
1481         if (self->tx_fifo.len == 1) {
1482                 /* Check if we must wait the min turn time or not */
1483                 mtt = irda_get_mtt(skb);
1484                 if (mtt) {
1485                         /* Check how much time we have used already */
1486                         do_gettimeofday(&self->now);
1487                         diff = self->now.tv_usec - self->stamp.tv_usec;
1488                         if (diff < 0)
1489                                 diff += 1000000;
1490
1491                         /* Check if the mtt is larger than the time we have
1492                          * already used by all the protocol processing
1493                          */
1494                         if (mtt > diff) {
1495                                 mtt -= diff;
1496
1497                                 /*
1498                                  * Use timer if delay larger than 125 us, and
1499                                  * use udelay for smaller values which should
1500                                  * be acceptable
1501                                  */
1502                                 if (mtt > 125) {
1503                                         /* Adjust for timer resolution */
1504                                         mtt = mtt / 125;
1505
1506                                         /* Setup timer */
1507                                         switch_bank(iobase, BANK4);
1508                                         outb(mtt & 0xff, iobase+TMRL);
1509                                         outb((mtt >> 8) & 0x0f, iobase+TMRH);
1510
1511                                         /* Start timer */
1512                                         outb(IRCR1_TMR_EN, iobase+IRCR1);
1513                                         self->io.direction = IO_XMIT;
1514
1515                                         /* Enable timer interrupt */
1516                                         switch_bank(iobase, BANK0);
1517                                         outb(IER_TMR_IE, iobase+IER);
1518
1519                                         /* Timer will take care of the rest */
1520                                         goto out;
1521                                 } else
1522                                         udelay(mtt);
1523                         }
1524                 }
1525                 /* Enable DMA interrupt */
1526                 switch_bank(iobase, BANK0);
1527                 outb(IER_DMA_IE, iobase+IER);
1528
1529                 /* Transmit frame */
1530                 nsc_ircc_dma_xmit(self, iobase);
1531         }
1532  out:
1533         /* Not busy transmitting anymore if window is not full,
1534          * and if we don't need to change speed */
1535         if ((self->tx_fifo.free < MAX_TX_WINDOW) && (self->new_speed == 0))
1536                 netif_wake_queue(self->netdev);
1537
1538         /* Restore bank register */
1539         outb(bank, iobase+BSR);
1540
1541         dev->trans_start = jiffies;
1542         spin_unlock_irqrestore(&self->lock, flags);
1543         dev_kfree_skb(skb);
1544
1545         return 0;
1546 }
1547
1548 /*
1549  * Function nsc_ircc_dma_xmit (self, iobase)
1550  *
1551  *    Transmit data using DMA
1552  *
1553  */
1554 static void nsc_ircc_dma_xmit(struct nsc_ircc_cb *self, int iobase)
1555 {
1556         int bsr;
1557
1558         /* Save current bank */
1559         bsr = inb(iobase+BSR);
1560
1561         /* Disable DMA */
1562         switch_bank(iobase, BANK0);
1563         outb(inb(iobase+MCR) & ~MCR_DMA_EN, iobase+MCR);
1564
1565         self->io.direction = IO_XMIT;
1566
1567         /* Choose transmit DMA channel  */
1568         switch_bank(iobase, BANK2);
1569         outb(ECR1_DMASWP|ECR1_DMANF|ECR1_EXT_SL, iobase+ECR1);
1570
1571         irda_setup_dma(self->io.dma,
1572                        ((u8 *)self->tx_fifo.queue[self->tx_fifo.ptr].start -
1573                         self->tx_buff.head) + self->tx_buff_dma,
1574                        self->tx_fifo.queue[self->tx_fifo.ptr].len,
1575                        DMA_TX_MODE);
1576
1577         /* Enable DMA and SIR interaction pulse */
1578         switch_bank(iobase, BANK0);
1579         outb(inb(iobase+MCR)|MCR_TX_DFR|MCR_DMA_EN|MCR_IR_PLS, iobase+MCR);
1580
1581         /* Restore bank register */
1582         outb(bsr, iobase+BSR);
1583 }
1584
1585 /*
1586  * Function nsc_ircc_pio_xmit (self, iobase)
1587  *
1588  *    Transmit data using PIO. Returns the number of bytes that actually
1589  *    got transferred
1590  *
1591  */
1592 static int nsc_ircc_pio_write(int iobase, __u8 *buf, int len, int fifo_size)
1593 {
1594         int actual = 0;
1595         __u8 bank;
1596
1597         IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
1598
1599         /* Save current bank */
1600         bank = inb(iobase+BSR);
1601
1602         switch_bank(iobase, BANK0);
1603         if (!(inb_p(iobase+LSR) & LSR_TXEMP)) {
1604                 IRDA_DEBUG(4, "%s(), warning, FIFO not empty yet!\n",
1605                            __FUNCTION__);
1606
1607                 /* FIFO may still be filled to the Tx interrupt threshold */
1608                 fifo_size -= 17;
1609         }
1610
1611         /* Fill FIFO with current frame */
1612         while ((fifo_size-- > 0) && (actual < len)) {
1613                 /* Transmit next byte */
1614                 outb(buf[actual++], iobase+TXD);
1615         }
1616
1617         IRDA_DEBUG(4, "%s(), fifo_size %d ; %d sent of %d\n",
1618                    __FUNCTION__, fifo_size, actual, len);
1619
1620         /* Restore bank */
1621         outb(bank, iobase+BSR);
1622
1623         return actual;
1624 }
1625
1626 /*
1627  * Function nsc_ircc_dma_xmit_complete (self)
1628  *
1629  *    The transfer of a frame in finished. This function will only be called
1630  *    by the interrupt handler
1631  *
1632  */
1633 static int nsc_ircc_dma_xmit_complete(struct nsc_ircc_cb *self)
1634 {
1635         int iobase;
1636         __u8 bank;
1637         int ret = TRUE;
1638
1639         IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
1640
1641         iobase = self->io.fir_base;
1642
1643         /* Save current bank */
1644         bank = inb(iobase+BSR);
1645
1646         /* Disable DMA */
1647         switch_bank(iobase, BANK0);
1648         outb(inb(iobase+MCR) & ~MCR_DMA_EN, iobase+MCR);
1649
1650         /* Check for underrrun! */
1651         if (inb(iobase+ASCR) & ASCR_TXUR) {
1652                 self->stats.tx_errors++;
1653                 self->stats.tx_fifo_errors++;
1654
1655                 /* Clear bit, by writing 1 into it */
1656                 outb(ASCR_TXUR, iobase+ASCR);
1657         } else {
1658                 self->stats.tx_packets++;
1659         }
1660
1661         /* Finished with this frame, so prepare for next */
1662         self->tx_fifo.ptr++;
1663         self->tx_fifo.len--;
1664
1665         /* Any frames to be sent back-to-back? */
1666         if (self->tx_fifo.len) {
1667                 nsc_ircc_dma_xmit(self, iobase);
1668
1669                 /* Not finished yet! */
1670                 ret = FALSE;
1671         } else {
1672                 /* Reset Tx FIFO info */
1673                 self->tx_fifo.len = self->tx_fifo.ptr = self->tx_fifo.free = 0;
1674                 self->tx_fifo.tail = self->tx_buff.head;
1675         }
1676
1677         /* Make sure we have room for more frames and
1678          * that we don't need to change speed */
1679         if ((self->tx_fifo.free < MAX_TX_WINDOW) && (self->new_speed == 0)) {
1680                 /* Not busy transmitting anymore */
1681                 /* Tell the network layer, that we can accept more frames */
1682                 netif_wake_queue(self->netdev);
1683         }
1684
1685         /* Restore bank */
1686         outb(bank, iobase+BSR);
1687
1688         return ret;
1689 }
1690
1691 /*
1692  * Function nsc_ircc_dma_receive (self)
1693  *
1694  *    Get ready for receiving a frame. The device will initiate a DMA
1695  *    if it starts to receive a frame.
1696  *
1697  */
1698 static int nsc_ircc_dma_receive(struct nsc_ircc_cb *self)
1699 {
1700         int iobase;
1701         __u8 bsr;
1702
1703         iobase = self->io.fir_base;
1704
1705         /* Reset Tx FIFO info */
1706         self->tx_fifo.len = self->tx_fifo.ptr = self->tx_fifo.free = 0;
1707         self->tx_fifo.tail = self->tx_buff.head;
1708
1709         /* Save current bank */
1710         bsr = inb(iobase+BSR);
1711
1712         /* Disable DMA */
1713         switch_bank(iobase, BANK0);
1714         outb(inb(iobase+MCR) & ~MCR_DMA_EN, iobase+MCR);
1715
1716         /* Choose DMA Rx, DMA Fairness, and Advanced mode */
1717         switch_bank(iobase, BANK2);
1718         outb(ECR1_DMANF|ECR1_EXT_SL, iobase+ECR1);
1719
1720         self->io.direction = IO_RECV;
1721         self->rx_buff.data = self->rx_buff.head;
1722
1723         /* Reset Rx FIFO. This will also flush the ST_FIFO */
1724         switch_bank(iobase, BANK0);
1725         outb(FCR_RXSR|FCR_FIFO_EN, iobase+FCR);
1726
1727         self->st_fifo.len = self->st_fifo.pending_bytes = 0;
1728         self->st_fifo.tail = self->st_fifo.head = 0;
1729
1730         irda_setup_dma(self->io.dma, self->rx_buff_dma, self->rx_buff.truesize,
1731                        DMA_RX_MODE);
1732
1733         /* Enable DMA */
1734         switch_bank(iobase, BANK0);
1735         outb(inb(iobase+MCR)|MCR_DMA_EN, iobase+MCR);
1736
1737         /* Restore bank register */
1738         outb(bsr, iobase+BSR);
1739
1740         return 0;
1741 }
1742
1743 /*
1744  * Function nsc_ircc_dma_receive_complete (self)
1745  *
1746  *    Finished with receiving frames
1747  *
1748  *
1749  */
1750 static int nsc_ircc_dma_receive_complete(struct nsc_ircc_cb *self, int iobase)
1751 {
1752         struct st_fifo *st_fifo;
1753         struct sk_buff *skb;
1754         __u8 status;
1755         __u8 bank;
1756         int len;
1757
1758         st_fifo = &self->st_fifo;
1759
1760         /* Save current bank */
1761         bank = inb(iobase+BSR);
1762
1763         /* Read all entries in status FIFO */
1764         switch_bank(iobase, BANK5);
1765         while ((status = inb(iobase+FRM_ST)) & FRM_ST_VLD) {
1766                 /* We must empty the status FIFO no matter what */
1767                 len = inb(iobase+RFLFL) | ((inb(iobase+RFLFH) & 0x1f) << 8);
1768
1769                 if (st_fifo->tail >= MAX_RX_WINDOW) {
1770                         IRDA_DEBUG(0, "%s(), window is full!\n", __FUNCTION__);
1771                         continue;
1772                 }
1773
1774                 st_fifo->entries[st_fifo->tail].status = status;
1775                 st_fifo->entries[st_fifo->tail].len = len;
1776                 st_fifo->pending_bytes += len;
1777                 st_fifo->tail++;
1778                 st_fifo->len++;
1779         }
1780         /* Try to process all entries in status FIFO */
1781         while (st_fifo->len > 0) {
1782                 /* Get first entry */
1783                 status = st_fifo->entries[st_fifo->head].status;
1784                 len    = st_fifo->entries[st_fifo->head].len;
1785                 st_fifo->pending_bytes -= len;
1786                 st_fifo->head++;
1787                 st_fifo->len--;
1788
1789                 /* Check for errors */
1790                 if (status & FRM_ST_ERR_MSK) {
1791                         if (status & FRM_ST_LOST_FR) {
1792                                 /* Add number of lost frames to stats */
1793                                 self->stats.rx_errors += len;
1794                         } else {
1795                                 /* Skip frame */
1796                                 self->stats.rx_errors++;
1797
1798                                 self->rx_buff.data += len;
1799
1800                                 if (status & FRM_ST_MAX_LEN)
1801                                         self->stats.rx_length_errors++;
1802
1803                                 if (status & FRM_ST_PHY_ERR)
1804                                         self->stats.rx_frame_errors++;
1805
1806                                 if (status & FRM_ST_BAD_CRC)
1807                                         self->stats.rx_crc_errors++;
1808                         }
1809                         /* The errors below can be reported in both cases */
1810                         if (status & FRM_ST_OVR1)
1811                                 self->stats.rx_fifo_errors++;
1812
1813                         if (status & FRM_ST_OVR2)
1814                                 self->stats.rx_fifo_errors++;
1815                 } else {
1816                         /*
1817                          * First we must make sure that the frame we
1818                          * want to deliver is all in main memory. If we
1819                          * cannot tell, then we check if the Rx FIFO is
1820                          * empty. If not then we will have to take a nap
1821                          * and try again later.
1822                          */
1823                         if (st_fifo->pending_bytes < self->io.fifo_size) {
1824                                 switch_bank(iobase, BANK0);
1825                                 if (inb(iobase+LSR) & LSR_RXDA) {
1826                                         /* Put this entry back in fifo */
1827                                         st_fifo->head--;
1828                                         st_fifo->len++;
1829                                         st_fifo->pending_bytes += len;
1830                                         st_fifo->entries[st_fifo->head].status = status;
1831                                         st_fifo->entries[st_fifo->head].len = len;
1832                                         /*
1833                                          * DMA not finished yet, so try again
1834                                          * later, set timer value, resolution
1835                                          * 125 us
1836                                          */
1837                                         switch_bank(iobase, BANK4);
1838                                         outb(0x02, iobase+TMRL); /* x 125 us */
1839                                         outb(0x00, iobase+TMRH);
1840
1841                                         /* Start timer */
1842                                         outb(IRCR1_TMR_EN, iobase+IRCR1);
1843
1844                                         /* Restore bank register */
1845                                         outb(bank, iobase+BSR);
1846
1847                                         return FALSE; /* I'll be back! */
1848                                 }
1849                         }
1850
1851                         /*
1852                          * Remember the time we received this frame, so we can
1853                          * reduce the min turn time a bit since we will know
1854                          * how much time we have used for protocol processing
1855                          */
1856                         do_gettimeofday(&self->stamp);
1857
1858                         skb = dev_alloc_skb(len+1);
1859                         if (skb == NULL)  {
1860                                 IRDA_WARNING("%s(), memory squeeze, "
1861                                              "dropping frame.\n",
1862                                              __FUNCTION__);
1863                                 self->stats.rx_dropped++;
1864
1865                                 /* Restore bank register */
1866                                 outb(bank, iobase+BSR);
1867
1868                                 return FALSE;
1869                         }
1870
1871                         /* Make sure IP header gets aligned */
1872                         skb_reserve(skb, 1);
1873
1874                         /* Copy frame without CRC */
1875                         if (self->io.speed < 4000000) {
1876                                 skb_put(skb, len-2);
1877                                 skb_copy_to_linear_data(skb,
1878                                                         self->rx_buff.data,
1879                                                         len - 2);
1880                         } else {
1881                                 skb_put(skb, len-4);
1882                                 skb_copy_to_linear_data(skb,
1883                                                         self->rx_buff.data,
1884                                                         len - 4);
1885                         }
1886
1887                         /* Move to next frame */
1888                         self->rx_buff.data += len;
1889                         self->stats.rx_bytes += len;
1890                         self->stats.rx_packets++;
1891
1892                         skb->dev = self->netdev;
1893                         skb_reset_mac_header(skb);
1894                         skb->protocol = htons(ETH_P_IRDA);
1895                         netif_rx(skb);
1896                         self->netdev->last_rx = jiffies;
1897                 }
1898         }
1899         /* Restore bank register */
1900         outb(bank, iobase+BSR);
1901
1902         return TRUE;
1903 }
1904
1905 /*
1906  * Function nsc_ircc_pio_receive (self)
1907  *
1908  *    Receive all data in receiver FIFO
1909  *
1910  */
1911 static void nsc_ircc_pio_receive(struct nsc_ircc_cb *self)
1912 {
1913         __u8 byte;
1914         int iobase;
1915
1916         iobase = self->io.fir_base;
1917
1918         /*  Receive all characters in Rx FIFO */
1919         do {
1920                 byte = inb(iobase+RXD);
1921                 async_unwrap_char(self->netdev, &self->stats, &self->rx_buff,
1922                                   byte);
1923         } while (inb(iobase+LSR) & LSR_RXDA); /* Data available */
1924 }
1925
1926 /*
1927  * Function nsc_ircc_sir_interrupt (self, eir)
1928  *
1929  *    Handle SIR interrupt
1930  *
1931  */
1932 static void nsc_ircc_sir_interrupt(struct nsc_ircc_cb *self, int eir)
1933 {
1934         int actual;
1935
1936         /* Check if transmit FIFO is low on data */
1937         if (eir & EIR_TXLDL_EV) {
1938                 /* Write data left in transmit buffer */
1939                 actual = nsc_ircc_pio_write(self->io.fir_base,
1940                                            self->tx_buff.data,
1941                                            self->tx_buff.len,
1942                                            self->io.fifo_size);
1943                 self->tx_buff.data += actual;
1944                 self->tx_buff.len  -= actual;
1945
1946                 self->io.direction = IO_XMIT;
1947
1948                 /* Check if finished */
1949                 if (self->tx_buff.len > 0)
1950                         self->ier = IER_TXLDL_IE;
1951                 else {
1952
1953                         self->stats.tx_packets++;
1954                         netif_wake_queue(self->netdev);
1955                         self->ier = IER_TXEMP_IE;
1956                 }
1957
1958         }
1959         /* Check if transmission has completed */
1960         if (eir & EIR_TXEMP_EV) {
1961                 /* Turn around and get ready to receive some data */
1962                 self->io.direction = IO_RECV;
1963                 self->ier = IER_RXHDL_IE;
1964                 /* Check if we need to change the speed?
1965                  * Need to be after self->io.direction to avoid race with
1966                  * nsc_ircc_hard_xmit_sir() - Jean II */
1967                 if (self->new_speed) {
1968                         IRDA_DEBUG(2, "%s(), Changing speed!\n", __FUNCTION__);
1969                         self->ier = nsc_ircc_change_speed(self,
1970                                                           self->new_speed);
1971                         self->new_speed = 0;
1972                         netif_wake_queue(self->netdev);
1973
1974                         /* Check if we are going to FIR */
1975                         if (self->io.speed > 115200) {
1976                                 /* No need to do anymore SIR stuff */
1977                                 return;
1978                         }
1979                 }
1980         }
1981
1982         /* Rx FIFO threshold or timeout */
1983         if (eir & EIR_RXHDL_EV) {
1984                 nsc_ircc_pio_receive(self);
1985
1986                 /* Keep receiving */
1987                 self->ier = IER_RXHDL_IE;
1988         }
1989 }
1990
1991 /*
1992  * Function nsc_ircc_fir_interrupt (self, eir)
1993  *
1994  *    Handle MIR/FIR interrupt
1995  *
1996  */
1997 static void nsc_ircc_fir_interrupt(struct nsc_ircc_cb *self, int iobase,
1998                                    int eir)
1999 {
2000         __u8 bank;
2001
2002         bank = inb(iobase+BSR);
2003
2004         /* Status FIFO event*/
2005         if (eir & EIR_SFIF_EV) {
2006                 /* Check if DMA has finished */
2007                 if (nsc_ircc_dma_receive_complete(self, iobase)) {
2008                         /* Wait for next status FIFO interrupt */
2009                         self->ier = IER_SFIF_IE;
2010                 } else {
2011                         self->ier = IER_SFIF_IE | IER_TMR_IE;
2012                 }
2013         } else if (eir & EIR_TMR_EV) { /* Timer finished */
2014                 /* Disable timer */
2015                 switch_bank(iobase, BANK4);
2016                 outb(0, iobase+IRCR1);
2017
2018                 /* Clear timer event */
2019                 switch_bank(iobase, BANK0);
2020                 outb(ASCR_CTE, iobase+ASCR);
2021
2022                 /* Check if this is a Tx timer interrupt */
2023                 if (self->io.direction == IO_XMIT) {
2024                         nsc_ircc_dma_xmit(self, iobase);
2025
2026                         /* Interrupt on DMA */
2027                         self->ier = IER_DMA_IE;
2028                 } else {
2029                         /* Check (again) if DMA has finished */
2030                         if (nsc_ircc_dma_receive_complete(self, iobase)) {
2031                                 self->ier = IER_SFIF_IE;
2032                         } else {
2033                                 self->ier = IER_SFIF_IE | IER_TMR_IE;
2034                         }
2035                 }
2036         } else if (eir & EIR_DMA_EV) {
2037                 /* Finished with all transmissions? */
2038                 if (nsc_ircc_dma_xmit_complete(self)) {
2039                         if(self->new_speed != 0) {
2040                                 /* As we stop the Tx queue, the speed change
2041                                  * need to be done when the Tx fifo is
2042                                  * empty. Ask for a Tx done interrupt */
2043                                 self->ier = IER_TXEMP_IE;
2044                         } else {
2045                                 /* Check if there are more frames to be
2046                                  * transmitted */
2047                                 if (irda_device_txqueue_empty(self->netdev)) {
2048                                         /* Prepare for receive */
2049                                         nsc_ircc_dma_receive(self);
2050                                         self->ier = IER_SFIF_IE;
2051                                 } else
2052                                         IRDA_WARNING("%s(), potential "
2053                                                      "Tx queue lockup !\n",
2054                                                      __FUNCTION__);
2055                         }
2056                 } else {
2057                         /*  Not finished yet, so interrupt on DMA again */
2058                         self->ier = IER_DMA_IE;
2059                 }
2060         } else if (eir & EIR_TXEMP_EV) {
2061                 /* The Tx FIFO has totally drained out, so now we can change
2062                  * the speed... - Jean II */
2063                 self->ier = nsc_ircc_change_speed(self, self->new_speed);
2064                 self->new_speed = 0;
2065                 netif_wake_queue(self->netdev);
2066                 /* Note : nsc_ircc_change_speed() restarted Rx fifo */
2067         }
2068
2069         outb(bank, iobase+BSR);
2070 }
2071
2072 /*
2073  * Function nsc_ircc_interrupt (irq, dev_id, regs)
2074  *
2075  *    An interrupt from the chip has arrived. Time to do some work
2076  *
2077  */
2078 static irqreturn_t nsc_ircc_interrupt(int irq, void *dev_id)
2079 {
2080         struct net_device *dev = dev_id;
2081         struct nsc_ircc_cb *self;
2082         __u8 bsr, eir;
2083         int iobase;
2084
2085         self = dev->priv;
2086
2087         spin_lock(&self->lock);
2088
2089         iobase = self->io.fir_base;
2090
2091         bsr = inb(iobase+BSR);  /* Save current bank */
2092
2093         switch_bank(iobase, BANK0);
2094         self->ier = inb(iobase+IER);
2095         eir = inb(iobase+EIR) & self->ier; /* Mask out the interesting ones */
2096
2097         outb(0, iobase+IER); /* Disable interrupts */
2098
2099         if (eir) {
2100                 /* Dispatch interrupt handler for the current speed */
2101                 if (self->io.speed > 115200)
2102                         nsc_ircc_fir_interrupt(self, iobase, eir);
2103                 else
2104                         nsc_ircc_sir_interrupt(self, eir);
2105         }
2106
2107         outb(self->ier, iobase+IER); /* Restore interrupts */
2108         outb(bsr, iobase+BSR);       /* Restore bank register */
2109
2110         spin_unlock(&self->lock);
2111         return IRQ_RETVAL(eir);
2112 }
2113
2114 /*
2115  * Function nsc_ircc_is_receiving (self)
2116  *
2117  *    Return TRUE is we are currently receiving a frame
2118  *
2119  */
2120 static int nsc_ircc_is_receiving(struct nsc_ircc_cb *self)
2121 {
2122         unsigned long flags;
2123         int status = FALSE;
2124         int iobase;
2125         __u8 bank;
2126
2127         IRDA_ASSERT(self != NULL, return FALSE;);
2128
2129         spin_lock_irqsave(&self->lock, flags);
2130
2131         if (self->io.speed > 115200) {
2132                 iobase = self->io.fir_base;
2133
2134                 /* Check if rx FIFO is not empty */
2135                 bank = inb(iobase+BSR);
2136                 switch_bank(iobase, BANK2);
2137                 if ((inb(iobase+RXFLV) & 0x3f) != 0) {
2138                         /* We are receiving something */
2139                         status =  TRUE;
2140                 }
2141                 outb(bank, iobase+BSR);
2142         } else
2143                 status = (self->rx_buff.state != OUTSIDE_FRAME);
2144
2145         spin_unlock_irqrestore(&self->lock, flags);
2146
2147         return status;
2148 }
2149
2150 /*
2151  * Function nsc_ircc_net_open (dev)
2152  *
2153  *    Start the device
2154  *
2155  */
2156 static int nsc_ircc_net_open(struct net_device *dev)
2157 {
2158         struct nsc_ircc_cb *self;
2159         int iobase;
2160         char hwname[32];
2161         __u8 bank;
2162
2163         IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
2164
2165         IRDA_ASSERT(dev != NULL, return -1;);
2166         self = (struct nsc_ircc_cb *) dev->priv;
2167
2168         IRDA_ASSERT(self != NULL, return 0;);
2169
2170         iobase = self->io.fir_base;
2171
2172         if (request_irq(self->io.irq, nsc_ircc_interrupt, 0, dev->name, dev)) {
2173                 IRDA_WARNING("%s, unable to allocate irq=%d\n",
2174                              driver_name, self->io.irq);
2175                 return -EAGAIN;
2176         }
2177         /*
2178          * Always allocate the DMA channel after the IRQ, and clean up on
2179          * failure.
2180          */
2181         if (request_dma(self->io.dma, dev->name)) {
2182                 IRDA_WARNING("%s, unable to allocate dma=%d\n",
2183                              driver_name, self->io.dma);
2184                 free_irq(self->io.irq, dev);
2185                 return -EAGAIN;
2186         }
2187
2188         /* Save current bank */
2189         bank = inb(iobase+BSR);
2190
2191         /* turn on interrupts */
2192         switch_bank(iobase, BANK0);
2193         outb(IER_LS_IE | IER_RXHDL_IE, iobase+IER);
2194
2195         /* Restore bank register */
2196         outb(bank, iobase+BSR);
2197
2198         /* Ready to play! */
2199         netif_start_queue(dev);
2200
2201         /* Give self a hardware name */
2202         sprintf(hwname, "NSC-FIR @ 0x%03x", self->io.fir_base);
2203
2204         /*
2205          * Open new IrLAP layer instance, now that everything should be
2206          * initialized properly
2207          */
2208         self->irlap = irlap_open(dev, &self->qos, hwname);
2209
2210         return 0;
2211 }
2212
2213 /*
2214  * Function nsc_ircc_net_close (dev)
2215  *
2216  *    Stop the device
2217  *
2218  */
2219 static int nsc_ircc_net_close(struct net_device *dev)
2220 {
2221         struct nsc_ircc_cb *self;
2222         int iobase;
2223         __u8 bank;
2224
2225         IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
2226
2227         IRDA_ASSERT(dev != NULL, return -1;);
2228
2229         self = (struct nsc_ircc_cb *) dev->priv;
2230         IRDA_ASSERT(self != NULL, return 0;);
2231
2232         /* Stop device */
2233         netif_stop_queue(dev);
2234
2235         /* Stop and remove instance of IrLAP */
2236         if (self->irlap)
2237                 irlap_close(self->irlap);
2238         self->irlap = NULL;
2239
2240         iobase = self->io.fir_base;
2241
2242         disable_dma(self->io.dma);
2243
2244         /* Save current bank */
2245         bank = inb(iobase+BSR);
2246
2247         /* Disable interrupts */
2248         switch_bank(iobase, BANK0);
2249         outb(0, iobase+IER);
2250
2251         free_irq(self->io.irq, dev);
2252         free_dma(self->io.dma);
2253
2254         /* Restore bank register */
2255         outb(bank, iobase+BSR);
2256
2257         return 0;
2258 }
2259
2260 /*
2261  * Function nsc_ircc_net_ioctl (dev, rq, cmd)
2262  *
2263  *    Process IOCTL commands for this device
2264  *
2265  */
2266 static int nsc_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
2267 {
2268         struct if_irda_req *irq = (struct if_irda_req *) rq;
2269         struct nsc_ircc_cb *self;
2270         unsigned long flags;
2271         int ret = 0;
2272
2273         IRDA_ASSERT(dev != NULL, return -1;);
2274
2275         self = dev->priv;
2276
2277         IRDA_ASSERT(self != NULL, return -1;);
2278
2279         IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __FUNCTION__, dev->name, cmd);
2280
2281         switch (cmd) {
2282         case SIOCSBANDWIDTH: /* Set bandwidth */
2283                 if (!capable(CAP_NET_ADMIN)) {
2284                         ret = -EPERM;
2285                         break;
2286                 }
2287                 spin_lock_irqsave(&self->lock, flags);
2288                 nsc_ircc_change_speed(self, irq->ifr_baudrate);
2289                 spin_unlock_irqrestore(&self->lock, flags);
2290                 break;
2291         case SIOCSMEDIABUSY: /* Set media busy */
2292                 if (!capable(CAP_NET_ADMIN)) {
2293                         ret = -EPERM;
2294                         break;
2295                 }
2296                 irda_device_set_media_busy(self->netdev, TRUE);
2297                 break;
2298         case SIOCGRECEIVING: /* Check if we are receiving right now */
2299                 /* This is already protected */
2300                 irq->ifr_receiving = nsc_ircc_is_receiving(self);
2301                 break;
2302         default:
2303                 ret = -EOPNOTSUPP;
2304         }
2305         return ret;
2306 }
2307
2308 static struct net_device_stats *nsc_ircc_net_get_stats(struct net_device *dev)
2309 {
2310         struct nsc_ircc_cb *self = (struct nsc_ircc_cb *) dev->priv;
2311
2312         return &self->stats;
2313 }
2314
2315 static int nsc_ircc_suspend(struct platform_device *dev, pm_message_t state)
2316 {
2317         struct nsc_ircc_cb *self = platform_get_drvdata(dev);
2318         int bank;
2319         unsigned long flags;
2320         int iobase = self->io.fir_base;
2321
2322         if (self->io.suspended)
2323                 return 0;
2324
2325         IRDA_DEBUG(1, "%s, Suspending\n", driver_name);
2326
2327         rtnl_lock();
2328         if (netif_running(self->netdev)) {
2329                 netif_device_detach(self->netdev);
2330                 spin_lock_irqsave(&self->lock, flags);
2331                 /* Save current bank */
2332                 bank = inb(iobase+BSR);
2333
2334                 /* Disable interrupts */
2335                 switch_bank(iobase, BANK0);
2336                 outb(0, iobase+IER);
2337
2338                 /* Restore bank register */
2339                 outb(bank, iobase+BSR);
2340
2341                 spin_unlock_irqrestore(&self->lock, flags);
2342                 free_irq(self->io.irq, self->netdev);
2343                 disable_dma(self->io.dma);
2344         }
2345         self->io.suspended = 1;
2346         rtnl_unlock();
2347
2348         return 0;
2349 }
2350
2351 static int nsc_ircc_resume(struct platform_device *dev)
2352 {
2353         struct nsc_ircc_cb *self = platform_get_drvdata(dev);
2354         unsigned long flags;
2355
2356         if (!self->io.suspended)
2357                 return 0;
2358
2359         IRDA_DEBUG(1, "%s, Waking up\n", driver_name);
2360
2361         rtnl_lock();
2362         nsc_ircc_setup(&self->io);
2363         nsc_ircc_init_dongle_interface(self->io.fir_base, self->io.dongle_id);
2364
2365         if (netif_running(self->netdev)) {
2366                 if (request_irq(self->io.irq, nsc_ircc_interrupt, 0,
2367                                 self->netdev->name, self->netdev)) {
2368                         IRDA_WARNING("%s, unable to allocate irq=%d\n",
2369                                      driver_name, self->io.irq);
2370
2371                         /*
2372                          * Don't fail resume process, just kill this
2373                          * network interface
2374                          */
2375                         unregister_netdevice(self->netdev);
2376                 } else {
2377                         spin_lock_irqsave(&self->lock, flags);
2378                         nsc_ircc_change_speed(self, self->io.speed);
2379                         spin_unlock_irqrestore(&self->lock, flags);
2380                         netif_device_attach(self->netdev);
2381                 }
2382
2383         } else {
2384                 spin_lock_irqsave(&self->lock, flags);
2385                 nsc_ircc_change_speed(self, 9600);
2386                 spin_unlock_irqrestore(&self->lock, flags);
2387         }
2388         self->io.suspended = 0;
2389         rtnl_unlock();
2390
2391         return 0;
2392 }
2393
2394 MODULE_AUTHOR("Dag Brattli <dagb@cs.uit.no>");
2395 MODULE_DESCRIPTION("NSC IrDA Device Driver");
2396 MODULE_LICENSE("GPL");
2397
2398
2399 module_param(qos_mtt_bits, int, 0);
2400 MODULE_PARM_DESC(qos_mtt_bits, "Minimum Turn Time");
2401 module_param_array(io, int, NULL, 0);
2402 MODULE_PARM_DESC(io, "Base I/O addresses");
2403 module_param_array(irq, int, NULL, 0);
2404 MODULE_PARM_DESC(irq, "IRQ lines");
2405 module_param_array(dma, int, NULL, 0);
2406 MODULE_PARM_DESC(dma, "DMA channels");
2407 module_param(dongle_id, int, 0);
2408 MODULE_PARM_DESC(dongle_id, "Type-id of used dongle");
2409
2410 module_init(nsc_ircc_init);
2411 module_exit(nsc_ircc_cleanup);
2412