drivers/net/irda/ali-ircc.c

   1 /*********************************************************************
   2  *
   3  * Filename:      ali-ircc.h
   4  * Version:       0.5
   5  * Description:   Driver for the ALI M1535D and M1543C FIR Controller
   6  * Status:        Experimental.
   7  * Author:        Benjamin Kong <benjamin_kong@ali.com.tw>
   8  * Created at:    2000/10/16 03:46PM
   9  * Modified at:   2001/1/3 02:55PM
  10  * Modified by:   Benjamin Kong <benjamin_kong@ali.com.tw>
  11  * Modified at:   2003/11/6 and support for ALi south-bridge chipsets M1563
  12  * Modified by:   Clear Zhang <clear_zhang@ali.com.tw>
  13  *
  14  *     Copyright (c) 2000 Benjamin Kong <benjamin_kong@ali.com.tw>
  15  *     All Rights Reserved
  16  *
  17  *     This program is free software; you can redistribute it and/or
  18  *     modify it under the terms of the GNU General Public License as
  19  *     published by the Free Software Foundation; either version 2 of
  20  *     the License, or (at your option) any later version.
  21  *
  22  ********************************************************************/
  23
  24 #include <linux/module.h>
  25
  26 #include <linux/kernel.h>
  27 #include <linux/types.h>
  28 #include <linux/skbuff.h>
  29 #include <linux/netdevice.h>
  30 #include <linux/ioport.h>
  31 #include <linux/delay.h>
  32 #include <linux/slab.h>
  33 #include <linux/init.h>
  34 #include <linux/rtnetlink.h>
  35 #include <linux/serial_reg.h>
  36 #include <linux/dma-mapping.h>
  37 #include <linux/platform_device.h>
  38
  39 #include <asm/io.h>
  40 #include <asm/dma.h>
  41 #include <asm/byteorder.h>
  42
  43 #include <net/irda/wrapper.h>
  44 #include <net/irda/irda.h>
  45 #include <net/irda/irda_device.h>
  46
  47 #include "ali-ircc.h"
  48
  49 #define CHIP_IO_EXTENT 8
  50 #define BROKEN_DONGLE_ID
  51
  52 #define ALI_IRCC_DRIVER_NAME "ali-ircc"
  53
  54 /* Power Management */
  55 static int ali_ircc_suspend(struct platform_device *dev, pm_message_t state);
  56 static int ali_ircc_resume(struct platform_device *dev);
  57
  58 static struct platform_driver ali_ircc_driver = {
  59         .suspend        = ali_ircc_suspend,
  60         .resume         = ali_ircc_resume,
  61         .driver         = {
  62                 .name   = ALI_IRCC_DRIVER_NAME,
  63         },
  64 };
  65
  66 /* Module parameters */
  67 static int qos_mtt_bits = 0x07;  /* 1 ms or more */
  68
  69 /* Use BIOS settions by default, but user may supply module parameters */
  70 static unsigned int io[]  = { ~0, ~0, ~0, ~0 };
  71 static unsigned int irq[] = { 0, 0, 0, 0 };
  72 static unsigned int dma[] = { 0, 0, 0, 0 };
  73
  74 static int  ali_ircc_probe_53(ali_chip_t *chip, chipio_t *info);
  75 static int  ali_ircc_init_43(ali_chip_t *chip, chipio_t *info);
  76 static int  ali_ircc_init_53(ali_chip_t *chip, chipio_t *info);
  77
  78 /* These are the currently known ALi sourth-bridge chipsets, the only one difference
  79  * is that M1543C doesn't support HP HDSL-3600
  80  */
  81 static ali_chip_t chips[] =
  82 {
  83         { "M1543", { 0x3f0, 0x370 }, 0x51, 0x23, 0x20, 0x43, ali_ircc_probe_53, ali_ircc_init_43 },
  84         { "M1535", { 0x3f0, 0x370 }, 0x51, 0x23, 0x20, 0x53, ali_ircc_probe_53, ali_ircc_init_53 },
  85         { "M1563", { 0x3f0, 0x370 }, 0x51, 0x23, 0x20, 0x63, ali_ircc_probe_53, ali_ircc_init_53 },
  86         { NULL }
  87 };
  88
  89 /* Max 4 instances for now */
  90 static struct ali_ircc_cb *dev_self[] = { NULL, NULL, NULL, NULL };
  91
  92 /* Dongle Types */
  93 static char *dongle_types[] = {
  94         "TFDS6000",
  95         "HP HSDL-3600",
  96         "HP HSDL-1100",
  97         "No dongle connected",
  98 };
  99
 100 /* Some prototypes */
 101 static int  ali_ircc_open(int i, chipio_t *info);
 102
 103 static int  ali_ircc_close(struct ali_ircc_cb *self);
 104
 105 static int  ali_ircc_setup(chipio_t *info);
 106 static int  ali_ircc_is_receiving(struct ali_ircc_cb *self);
 107 static int  ali_ircc_net_open(struct net_device *dev);
 108 static int  ali_ircc_net_close(struct net_device *dev);
 109 static int  ali_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
 110 static void ali_ircc_change_speed(struct ali_ircc_cb *self, __u32 baud);
 111 static struct net_device_stats *ali_ircc_net_get_stats(struct net_device *dev);
 112
 113 /* SIR function */
 114 static int  ali_ircc_sir_hard_xmit(struct sk_buff *skb, struct net_device *dev);
 115 static irqreturn_t ali_ircc_sir_interrupt(struct ali_ircc_cb *self);
 116 static void ali_ircc_sir_receive(struct ali_ircc_cb *self);
 117 static void ali_ircc_sir_write_wakeup(struct ali_ircc_cb *self);
 118 static int  ali_ircc_sir_write(int iobase, int fifo_size, __u8 *buf, int len);
 119 static void ali_ircc_sir_change_speed(struct ali_ircc_cb *priv, __u32 speed);
 120
 121 /* FIR function */
 122 static int  ali_ircc_fir_hard_xmit(struct sk_buff *skb, struct net_device *dev);
 123 static void ali_ircc_fir_change_speed(struct ali_ircc_cb *priv, __u32 speed);
 124 static irqreturn_t ali_ircc_fir_interrupt(struct ali_ircc_cb *self);
 125 static int  ali_ircc_dma_receive(struct ali_ircc_cb *self);
 126 static int  ali_ircc_dma_receive_complete(struct ali_ircc_cb *self);
 127 static int  ali_ircc_dma_xmit_complete(struct ali_ircc_cb *self);
 128 static void ali_ircc_dma_xmit(struct ali_ircc_cb *self);
 129
 130 /* My Function */
 131 static int  ali_ircc_read_dongle_id (int i, chipio_t *info);
 132 static void ali_ircc_change_dongle_speed(struct ali_ircc_cb *priv, int speed);
 133
 134 /* ALi chip function */
 135 static void SIR2FIR(int iobase);
 136 static void FIR2SIR(int iobase);
 137 static void SetCOMInterrupts(struct ali_ircc_cb *self , unsigned char enable);
 138
 139 /*
 140  * Function ali_ircc_init ()
 141  *
 142  *    Initialize chip. Find out whay kinds of chips we are dealing with
 143  *    and their configuation registers address
 144  */
 145 static int __init ali_ircc_init(void)
 146 {
 147         ali_chip_t *chip;
 148         chipio_t info;
 149         int ret;
 150         int cfg, cfg_base;
 151         int reg, revision;
 152         int i = 0;
 153
 154         IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__);
 155
 156         ret = platform_driver_register(&ali_ircc_driver);
 157         if (ret) {
 158                 IRDA_ERROR("%s, Can't register driver!\n",
 159                            ALI_IRCC_DRIVER_NAME);
 160                 return ret;
 161         }
 162
 163         ret = -ENODEV;
 164
 165         /* Probe for all the ALi chipsets we know about */
 166         for (chip= chips; chip->name; chip++, i++)
 167         {
 168                 IRDA_DEBUG(2, "%s(), Probing for %s ...\n", __FUNCTION__, chip->name);
 169
 170                 /* Try all config registers for this chip */
 171                 for (cfg=0; cfg<2; cfg++)
 172                 {
 173                         cfg_base = chip->cfg[cfg];
 174                         if (!cfg_base)
 175                                 continue;
 176
 177                         memset(&info, 0, sizeof(chipio_t));
 178                         info.cfg_base = cfg_base;
 179                         info.fir_base = io[i];
 180                         info.dma = dma[i];
 181                         info.irq = irq[i];
 182
 183
 184                         /* Enter Configuration */
 185                         outb(chip->entr1, cfg_base);
 186                         outb(chip->entr2, cfg_base);
 187
 188                         /* Select Logical Device 5 Registers (UART2) */
 189                         outb(0x07, cfg_base);
 190                         outb(0x05, cfg_base+1);
 191
 192                         /* Read Chip Identification Register */
 193                         outb(chip->cid_index, cfg_base);
 194                         reg = inb(cfg_base+1);
 195
 196                         if (reg == chip->cid_value)
 197                         {
 198                                 IRDA_DEBUG(2, "%s(), Chip found at 0x%03x\n", __FUNCTION__, cfg_base);
 199
 200                                 outb(0x1F, cfg_base);
 201                                 revision = inb(cfg_base+1);
 202                                 IRDA_DEBUG(2, "%s(), Found %s chip, revision=%d\n", __FUNCTION__,
 203                                            chip->name, revision);
 204
 205                                 /*
 206                                  * If the user supplies the base address, then
 207                                  * we init the chip, if not we probe the values
 208                                  * set by the BIOS
 209                                  */
 210                                 if (io[i] < 2000)
 211                                 {
 212                                         chip->init(chip, &info);
 213                                 }
 214                                 else
 215                                 {
 216                                         chip->probe(chip, &info);
 217                                 }
 218
 219                                 if (ali_ircc_open(i, &info) == 0)
 220                                         ret = 0;
 221                                 i++;
 222                         }
 223                         else
 224                         {
 225                                 IRDA_DEBUG(2, "%s(), No %s chip at 0x%03x\n", __FUNCTION__, chip->name, cfg_base);
 226                         }
 227                         /* Exit configuration */
 228                         outb(0xbb, cfg_base);
 229                 }
 230         }
 231
 232         IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __FUNCTION__);
 233
 234         if (ret)
 235                 platform_driver_unregister(&ali_ircc_driver);
 236
 237         return ret;
 238 }
 239
 240 /*
 241  * Function ali_ircc_cleanup ()
 242  *
 243  *    Close all configured chips
 244  *
 245  */
 246 static void __exit ali_ircc_cleanup(void)
 247 {
 248         int i;
 249
 250         IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__);
 251
 252         for (i=0; i < ARRAY_SIZE(dev_self); i++) {
 253                 if (dev_self[i])
 254                         ali_ircc_close(dev_self[i]);
 255         }
 256
 257         platform_driver_unregister(&ali_ircc_driver);
 258
 259         IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __FUNCTION__);
 260 }
 261
 262 /*
 263  * Function ali_ircc_open (int i, chipio_t *inf)
 264  *
 265  *    Open driver instance
 266  *
 267  */
 268 static int ali_ircc_open(int i, chipio_t *info)
 269 {
 270         struct net_device *dev;
 271         struct ali_ircc_cb *self;
 272         int dongle_id;
 273         int err;
 274
 275         IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__);
 276
 277         if (i >= ARRAY_SIZE(dev_self)) {
 278                 IRDA_ERROR("%s(), maximum number of supported chips reached!\n",
 279                            __FUNCTION__);
 280                 return -ENOMEM;
 281         }
 282
 283         /* Set FIR FIFO and DMA Threshold */
 284         if ((ali_ircc_setup(info)) == -1)
 285                 return -1;
 286
 287         dev = alloc_irdadev(sizeof(*self));
 288         if (dev == NULL) {
 289                 IRDA_ERROR("%s(), can't allocate memory for control block!\n",
 290                            __FUNCTION__);
 291                 return -ENOMEM;
 292         }
 293
 294         self = dev->priv;
 295         self->netdev = dev;
 296         spin_lock_init(&self->lock);
 297
 298         /* Need to store self somewhere */
 299         dev_self[i] = self;
 300         self->index = i;
 301
 302         /* Initialize IO */
 303         self->io.cfg_base  = info->cfg_base;    /* In ali_ircc_probe_53 assign          */
 304         self->io.fir_base  = info->fir_base;    /* info->sir_base = info->fir_base      */
 305         self->io.sir_base  = info->sir_base;    /* ALi SIR and FIR use the same address */
 306         self->io.irq       = info->irq;
 307         self->io.fir_ext   = CHIP_IO_EXTENT;
 308         self->io.dma       = info->dma;
 309         self->io.fifo_size = 16;                /* SIR: 16, FIR: 32 Benjamin 2000/11/1 */
 310
 311         /* Reserve the ioports that we need */
 312         if (!request_region(self->io.fir_base, self->io.fir_ext,
 313                             ALI_IRCC_DRIVER_NAME)) {
 314                 IRDA_WARNING("%s(), can't get iobase of 0x%03x\n", __FUNCTION__,
 315                         self->io.fir_base);
 316                 err = -ENODEV;
 317                 goto err_out1;
 318         }
 319
 320         /* Initialize QoS for this device */
 321         irda_init_max_qos_capabilies(&self->qos);
 322
 323         /* The only value we must override it the baudrate */
 324         self->qos.baud_rate.bits = IR_9600|IR_19200|IR_38400|IR_57600|
 325                 IR_115200|IR_576000|IR_1152000|(IR_4000000 << 8); // benjamin 2000/11/8 05:27PM
 326
 327         self->qos.min_turn_time.bits = qos_mtt_bits;
 328
 329         irda_qos_bits_to_value(&self->qos);
 330
 331         /* Max DMA buffer size needed = (data_size + 6) * (window_size) + 6; */
 332         self->rx_buff.truesize = 14384;
 333         self->tx_buff.truesize = 14384;
 334
 335         /* Allocate memory if needed */
 336         self->rx_buff.head =
 337                 dma_alloc_coherent(NULL, self->rx_buff.truesize,
 338                                    &self->rx_buff_dma, GFP_KERNEL);
 339         if (self->rx_buff.head == NULL) {
 340                 err = -ENOMEM;
 341                 goto err_out2;
 342         }
 343         memset(self->rx_buff.head, 0, self->rx_buff.truesize);
 344
 345         self->tx_buff.head =
 346                 dma_alloc_coherent(NULL, self->tx_buff.truesize,
 347                                    &self->tx_buff_dma, GFP_KERNEL);
 348         if (self->tx_buff.head == NULL) {
 349                 err = -ENOMEM;
 350                 goto err_out3;
 351         }
 352         memset(self->tx_buff.head, 0, self->tx_buff.truesize);
 353
 354         self->rx_buff.in_frame = FALSE;
 355         self->rx_buff.state = OUTSIDE_FRAME;
 356         self->tx_buff.data = self->tx_buff.head;
 357         self->rx_buff.data = self->rx_buff.head;
 358
 359         /* Reset Tx queue info */
 360         self->tx_fifo.len = self->tx_fifo.ptr = self->tx_fifo.free = 0;
 361         self->tx_fifo.tail = self->tx_buff.head;
 362
 363
 364         /* Keep track of module usage */
 365         SET_MODULE_OWNER(dev);
 366
 367         /* Override the network functions we need to use */
 368         dev->hard_start_xmit = ali_ircc_sir_hard_xmit;
 369         dev->open            = ali_ircc_net_open;
 370         dev->stop            = ali_ircc_net_close;
 371         dev->do_ioctl        = ali_ircc_net_ioctl;
 372         dev->get_stats       = ali_ircc_net_get_stats;
 373
 374         err = register_netdev(dev);
 375         if (err) {
 376                 IRDA_ERROR("%s(), register_netdev() failed!\n", __FUNCTION__);
 377                 goto err_out4;
 378         }
 379         IRDA_MESSAGE("IrDA: Registered device %s\n", dev->name);
 380
 381         /* Check dongle id */
 382         dongle_id = ali_ircc_read_dongle_id(i, info);
 383         IRDA_MESSAGE("%s(), %s, Found dongle: %s\n", __FUNCTION__,
 384                      ALI_IRCC_DRIVER_NAME, dongle_types[dongle_id]);
 385
 386         self->io.dongle_id = dongle_id;
 387
 388         IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __FUNCTION__);
 389
 390         return 0;
 391
 392  err_out4:
 393         dma_free_coherent(NULL, self->tx_buff.truesize,
 394                           self->tx_buff.head, self->tx_buff_dma);
 395  err_out3:
 396         dma_free_coherent(NULL, self->rx_buff.truesize,
 397                           self->rx_buff.head, self->rx_buff_dma);
 398  err_out2:
 399         release_region(self->io.fir_base, self->io.fir_ext);
 400  err_out1:
 401         dev_self[i] = NULL;
 402         free_netdev(dev);
 403         return err;
 404 }
 405
 406
 407 /*
 408  * Function ali_ircc_close (self)
 409  *
 410  *    Close driver instance
 411  *
 412  */
 413 static int __exit ali_ircc_close(struct ali_ircc_cb *self)
 414 {
 415         int iobase;
 416
 417         IRDA_DEBUG(4, "%s(), ---------------- Start ----------------\n", __FUNCTION__);
 418
 419         IRDA_ASSERT(self != NULL, return -1;);
 420
 421         iobase = self->io.fir_base;
 422
 423         /* Remove netdevice */
 424         unregister_netdev(self->netdev);
 425
 426         /* Release the PORT that this driver is using */
 427         IRDA_DEBUG(4, "%s(), Releasing Region %03x\n", __FUNCTION__, self->io.fir_base);
 428         release_region(self->io.fir_base, self->io.fir_ext);
 429
 430         if (self->tx_buff.head)
 431                 dma_free_coherent(NULL, self->tx_buff.truesize,
 432                                   self->tx_buff.head, self->tx_buff_dma);
 433
 434         if (self->rx_buff.head)
 435                 dma_free_coherent(NULL, self->rx_buff.truesize,
 436                                   self->rx_buff.head, self->rx_buff_dma);
 437
 438         dev_self[self->index] = NULL;
 439         free_netdev(self->netdev);
 440
 441         IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __FUNCTION__);
 442
 443         return 0;
 444 }
 445
 446 /*
 447  * Function ali_ircc_init_43 (chip, info)
 448  *
 449  *    Initialize the ALi M1543 chip.
 450  */
 451 static int ali_ircc_init_43(ali_chip_t *chip, chipio_t *info)
 452 {
 453         /* All controller information like I/O address, DMA channel, IRQ
 454          * are set by BIOS
 455          */
 456
 457         return 0;
 458 }
 459
 460 /*
 461  * Function ali_ircc_init_53 (chip, info)
 462  *
 463  *    Initialize the ALi M1535 chip.
 464  */
 465 static int ali_ircc_init_53(ali_chip_t *chip, chipio_t *info)
 466 {
 467         /* All controller information like I/O address, DMA channel, IRQ
 468          * are set by BIOS
 469          */
 470
 471         return 0;
 472 }
 473
 474 /*
 475  * Function ali_ircc_probe_53 (chip, info)
 476  *
 477  *      Probes for the ALi M1535D or M1535
 478  */
 479 static int ali_ircc_probe_53(ali_chip_t *chip, chipio_t *info)
 480 {
 481         int cfg_base = info->cfg_base;
 482         int hi, low, reg;
 483
 484         IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__);
 485
 486         /* Enter Configuration */
 487         outb(chip->entr1, cfg_base);
 488         outb(chip->entr2, cfg_base);
 489
 490         /* Select Logical Device 5 Registers (UART2) */
 491         outb(0x07, cfg_base);
 492         outb(0x05, cfg_base+1);
 493
 494         /* Read address control register */
 495         outb(0x60, cfg_base);
 496         hi = inb(cfg_base+1);
 497         outb(0x61, cfg_base);
 498         low = inb(cfg_base+1);
 499         info->fir_base = (hi<<8) + low;
 500
 501         info->sir_base = info->fir_base;
 502
 503         IRDA_DEBUG(2, "%s(), probing fir_base=0x%03x\n", __FUNCTION__, info->fir_base);
 504
 505         /* Read IRQ control register */
 506         outb(0x70, cfg_base);
 507         reg = inb(cfg_base+1);
 508         info->irq = reg & 0x0f;
 509         IRDA_DEBUG(2, "%s(), probing irq=%d\n", __FUNCTION__, info->irq);
 510
 511         /* Read DMA channel */
 512         outb(0x74, cfg_base);
 513         reg = inb(cfg_base+1);
 514         info->dma = reg & 0x07;
 515
 516         if(info->dma == 0x04)
 517                 IRDA_WARNING("%s(), No DMA channel assigned !\n", __FUNCTION__);
 518         else
 519                 IRDA_DEBUG(2, "%s(), probing dma=%d\n", __FUNCTION__, info->dma);
 520
 521         /* Read Enabled Status */
 522         outb(0x30, cfg_base);
 523         reg = inb(cfg_base+1);
 524         info->enabled = (reg & 0x80) && (reg & 0x01);
 525         IRDA_DEBUG(2, "%s(), probing enabled=%d\n", __FUNCTION__, info->enabled);
 526
 527         /* Read Power Status */
 528         outb(0x22, cfg_base);
 529         reg = inb(cfg_base+1);
 530         info->suspended = (reg & 0x20);
 531         IRDA_DEBUG(2, "%s(), probing suspended=%d\n", __FUNCTION__, info->suspended);
 532
 533         /* Exit configuration */
 534         outb(0xbb, cfg_base);
 535
 536         IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __FUNCTION__);
 537
 538         return 0;
 539 }
 540
 541 /*
 542  * Function ali_ircc_setup (info)
 543  *
 544  *      Set FIR FIFO and DMA Threshold
 545  *      Returns non-negative on success.
 546  *
 547  */
 548 static int ali_ircc_setup(chipio_t *info)
 549 {
 550         unsigned char tmp;
 551         int version;
 552         int iobase = info->fir_base;
 553
 554         IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__);
 555
 556         /* Locking comments :
 557          * Most operations here need to be protected. We are called before
 558          * the device instance is created in ali_ircc_open(), therefore
 559          * nobody can bother us - Jean II */
 560
 561         /* Switch to FIR space */
 562         SIR2FIR(iobase);
 563
 564         /* Master Reset */
 565         outb(0x40, iobase+FIR_MCR); // benjamin 2000/11/30 11:45AM
 566
 567         /* Read FIR ID Version Register */
 568         switch_bank(iobase, BANK3);
 569         version = inb(iobase+FIR_ID_VR);
 570
 571         /* Should be 0x00 in the M1535/M1535D */
 572         if(version != 0x00)
 573         {
 574                 IRDA_ERROR("%s, Wrong chip version %02x\n",
 575                            ALI_IRCC_DRIVER_NAME, version);
 576                 return -1;
 577         }
 578
 579         /* Set FIR FIFO Threshold Register */
 580         switch_bank(iobase, BANK1);
 581         outb(RX_FIFO_Threshold, iobase+FIR_FIFO_TR);
 582
 583         /* Set FIR DMA Threshold Register */
 584         outb(RX_DMA_Threshold, iobase+FIR_DMA_TR);
 585
 586         /* CRC enable */
 587         switch_bank(iobase, BANK2);
 588         outb(inb(iobase+FIR_IRDA_CR) | IRDA_CR_CRC, iobase+FIR_IRDA_CR);
 589
 590         /* NDIS driver set TX Length here BANK2 Alias 3, Alias4*/
 591
 592         /* Switch to Bank 0 */
 593         switch_bank(iobase, BANK0);
 594
 595         tmp = inb(iobase+FIR_LCR_B);
 596         tmp &=~0x20; // disable SIP
 597         tmp |= 0x80; // these two steps make RX mode
 598         tmp &= 0xbf;
 599         outb(tmp, iobase+FIR_LCR_B);
 600
 601         /* Disable Interrupt */
 602         outb(0x00, iobase+FIR_IER);
 603
 604
 605         /* Switch to SIR space */
 606         FIR2SIR(iobase);
 607
 608         IRDA_MESSAGE("%s, driver loaded (Benjamin Kong)\n",
 609                      ALI_IRCC_DRIVER_NAME);
 610
 611         /* Enable receive interrupts */
 612         // outb(UART_IER_RDI, iobase+UART_IER); //benjamin 2000/11/23 01:25PM
 613         // Turn on the interrupts in ali_ircc_net_open
 614
 615         IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__);
 616
 617         return 0;
 618 }
 619
 620 /*
 621  * Function ali_ircc_read_dongle_id (int index, info)
 622  *
 623  * Try to read dongle indentification. This procedure needs to be executed
 624  * once after power-on/reset. It also needs to be used whenever you suspect
 625  * that the user may have plugged/unplugged the IrDA Dongle.
 626  */
 627 static int ali_ircc_read_dongle_id (int i, chipio_t *info)
 628 {
 629         int dongle_id, reg;
 630         int cfg_base = info->cfg_base;
 631
 632         IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__);
 633
 634         /* Enter Configuration */
 635         outb(chips[i].entr1, cfg_base);
 636         outb(chips[i].entr2, cfg_base);
 637
 638         /* Select Logical Device 5 Registers (UART2) */
 639         outb(0x07, cfg_base);
 640         outb(0x05, cfg_base+1);
 641
 642         /* Read Dongle ID */
 643         outb(0xf0, cfg_base);
 644         reg = inb(cfg_base+1);
 645         dongle_id = ((reg>>6)&0x02) | ((reg>>5)&0x01);
 646         IRDA_DEBUG(2, "%s(), probing dongle_id=%d, dongle_types=%s\n", __FUNCTION__,
 647                 dongle_id, dongle_types[dongle_id]);
 648
 649         /* Exit configuration */
 650         outb(0xbb, cfg_base);
 651
 652         IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__);
 653
 654         return dongle_id;
 655 }
 656
 657 /*
 658  * Function ali_ircc_interrupt (irq, dev_id, regs)
 659  *
 660  *    An interrupt from the chip has arrived. Time to do some work
 661  *
 662  */
 663 static irqreturn_t ali_ircc_interrupt(int irq, void *dev_id,
 664                                         struct pt_regs *regs)
 665 {
 666         struct net_device *dev = (struct net_device *) dev_id;
 667         struct ali_ircc_cb *self;
 668         int ret;
 669
 670         IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__);
 671
 672         if (!dev) {
 673                 IRDA_WARNING("%s: irq %d for unknown device.\n",
 674                              ALI_IRCC_DRIVER_NAME, irq);
 675                 return IRQ_NONE;
 676         }
 677
 678         self = (struct ali_ircc_cb *) dev->priv;
 679
 680         spin_lock(&self->lock);
 681
 682         /* Dispatch interrupt handler for the current speed */
 683         if (self->io.speed > 115200)
 684                 ret = ali_ircc_fir_interrupt(self);
 685         else
 686                 ret = ali_ircc_sir_interrupt(self);
 687
 688         spin_unlock(&self->lock);
 689
 690         IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__);
 691         return ret;
 692 }
 693 /*
 694  * Function ali_ircc_fir_interrupt(irq, struct ali_ircc_cb *self)
 695  *
 696  *    Handle MIR/FIR interrupt
 697  *
 698  */
 699 static irqreturn_t ali_ircc_fir_interrupt(struct ali_ircc_cb *self)
 700 {
 701         __u8 eir, OldMessageCount;
 702         int iobase, tmp;
 703
 704         IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __FUNCTION__);
 705
 706         iobase = self->io.fir_base;
 707
 708         switch_bank(iobase, BANK0);
 709         self->InterruptID = inb(iobase+FIR_IIR);
 710         self->BusStatus = inb(iobase+FIR_BSR);
 711
 712         OldMessageCount = (self->LineStatus + 1) & 0x07;
 713         self->LineStatus = inb(iobase+FIR_LSR);
 714         //self->ier = inb(iobase+FIR_IER);              2000/12/1 04:32PM
 715         eir = self->InterruptID & self->ier; /* Mask out the interesting ones */
 716
 717         IRDA_DEBUG(1, "%s(), self->InterruptID = %x\n", __FUNCTION__,self->InterruptID);
 718         IRDA_DEBUG(1, "%s(), self->LineStatus = %x\n", __FUNCTION__,self->LineStatus);
 719         IRDA_DEBUG(1, "%s(), self->ier = %x\n", __FUNCTION__,self->ier);
 720         IRDA_DEBUG(1, "%s(), eir = %x\n", __FUNCTION__,eir);
 721
 722         /* Disable interrupts */
 723          SetCOMInterrupts(self, FALSE);
 724
 725         /* Tx or Rx Interrupt */
 726
 727         if (eir & IIR_EOM)
 728         {
 729                 if (self->io.direction == IO_XMIT) /* TX */
 730                 {
 731                         IRDA_DEBUG(1, "%s(), ******* IIR_EOM (Tx) *******\n", __FUNCTION__);
 732
 733                         if(ali_ircc_dma_xmit_complete(self))
 734                         {
 735                                 if (irda_device_txqueue_empty(self->netdev))
 736                                 {
 737                                         /* Prepare for receive */
 738                                         ali_ircc_dma_receive(self);
 739                                         self->ier = IER_EOM;
 740                                 }
 741                         }
 742                         else
 743                         {
 744                                 self->ier = IER_EOM;
 745                         }
 746
 747                 }
 748                 else /* RX */
 749                 {
 750                         IRDA_DEBUG(1, "%s(), ******* IIR_EOM (Rx) *******\n", __FUNCTION__);
 751
 752                         if(OldMessageCount > ((self->LineStatus+1) & 0x07))
 753                         {
 754                                 self->rcvFramesOverflow = TRUE;
 755                                 IRDA_DEBUG(1, "%s(), ******* self->rcvFramesOverflow = TRUE ******** \n", __FUNCTION__);
 756                         }
 757
 758                         if (ali_ircc_dma_receive_complete(self))
 759                         {
 760                                 IRDA_DEBUG(1, "%s(), ******* receive complete ******** \n", __FUNCTION__);
 761
 762                                 self->ier = IER_EOM;
 763                         }
 764                         else
 765                         {
 766                                 IRDA_DEBUG(1, "%s(), ******* Not receive complete ******** \n", __FUNCTION__);
 767
 768                                 self->ier = IER_EOM | IER_TIMER;
 769                         }
 770
 771                 }
 772         }
 773         /* Timer Interrupt */
 774         else if (eir & IIR_TIMER)
 775         {
 776                 if(OldMessageCount > ((self->LineStatus+1) & 0x07))
 777                 {
 778                         self->rcvFramesOverflow = TRUE;
 779                         IRDA_DEBUG(1, "%s(), ******* self->rcvFramesOverflow = TRUE ******* \n", __FUNCTION__);
 780                 }
 781                 /* Disable Timer */
 782                 switch_bank(iobase, BANK1);
 783                 tmp = inb(iobase+FIR_CR);
 784                 outb( tmp& ~CR_TIMER_EN, iobase+FIR_CR);
 785
 786                 /* Check if this is a Tx timer interrupt */
 787                 if (self->io.direction == IO_XMIT)
 788                 {
 789                         ali_ircc_dma_xmit(self);
 790
 791                         /* Interrupt on EOM */
 792                         self->ier = IER_EOM;
 793
 794                 }
 795                 else /* Rx */
 796                 {
 797                         if(ali_ircc_dma_receive_complete(self))
 798                         {
 799                                 self->ier = IER_EOM;
 800                         }
 801                         else
 802                         {
 803                                 self->ier = IER_EOM | IER_TIMER;
 804                         }
 805                 }
 806         }
 807
 808         /* Restore Interrupt */
 809         SetCOMInterrupts(self, TRUE);
 810
 811         IRDA_DEBUG(1, "%s(), ----------------- End ---------------\n", __FUNCTION__);
 812         return IRQ_RETVAL(eir);
 813 }
 814
 815 /*
 816  * Function ali_ircc_sir_interrupt (irq, self, eir)
 817  *
 818  *    Handle SIR interrupt
 819  *
 820  */
 821 static irqreturn_t ali_ircc_sir_interrupt(struct ali_ircc_cb *self)
 822 {
 823         int iobase;
 824         int iir, lsr;
 825
 826         IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__);
 827
 828         iobase = self->io.sir_base;
 829
 830         iir = inb(iobase+UART_IIR) & UART_IIR_ID;
 831         if (iir) {
 832                 /* Clear interrupt */
 833                 lsr = inb(iobase+UART_LSR);
 834
 835                 IRDA_DEBUG(4, "%s(), iir=%02x, lsr=%02x, iobase=%#x\n", __FUNCTION__,
 836                            iir, lsr, iobase);
 837
 838                 switch (iir)
 839                 {
 840                         case UART_IIR_RLSI:
 841                                 IRDA_DEBUG(2, "%s(), RLSI\n", __FUNCTION__);
 842                                 break;
 843                         case UART_IIR_RDI:
 844                                 /* Receive interrupt */
 845                                 ali_ircc_sir_receive(self);
 846                                 break;
 847                         case UART_IIR_THRI:
 848                                 if (lsr & UART_LSR_THRE)
 849                                 {
 850                                         /* Transmitter ready for data */
 851                                         ali_ircc_sir_write_wakeup(self);
 852                                 }
 853                                 break;
 854                         default:
 855                                 IRDA_DEBUG(0, "%s(), unhandled IIR=%#x\n", __FUNCTION__, iir);
 856                                 break;
 857                 }
 858
 859         }
 860
 861
 862         IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__);
 863
 864         return IRQ_RETVAL(iir);
 865 }
 866
 867
 868 /*
 869  * Function ali_ircc_sir_receive (self)
 870  *
 871  *    Receive one frame from the infrared port
 872  *
 873  */
 874 static void ali_ircc_sir_receive(struct ali_ircc_cb *self)
 875 {
 876         int boguscount = 0;
 877         int iobase;
 878
 879         IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__);
 880         IRDA_ASSERT(self != NULL, return;);
 881
 882         iobase = self->io.sir_base;
 883
 884         /*
 885          * Receive all characters in Rx FIFO, unwrap and unstuff them.
 886          * async_unwrap_char will deliver all found frames
 887          */
 888         do {
 889                 async_unwrap_char(self->netdev, &self->stats, &self->rx_buff,
 890                                   inb(iobase+UART_RX));
 891
 892                 /* Make sure we don't stay here too long */
 893                 if (boguscount++ > 32) {
 894                         IRDA_DEBUG(2,"%s(), breaking!\n", __FUNCTION__);
 895                         break;
 896                 }
 897         } while (inb(iobase+UART_LSR) & UART_LSR_DR);
 898
 899         IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ );
 900 }
 901
 902 /*
 903  * Function ali_ircc_sir_write_wakeup (tty)
 904  *
 905  *    Called by the driver when there's room for more data.  If we have
 906  *    more packets to send, we send them here.
 907  *
 908  */
 909 static void ali_ircc_sir_write_wakeup(struct ali_ircc_cb *self)
 910 {
 911         int actual = 0;
 912         int iobase;
 913
 914         IRDA_ASSERT(self != NULL, return;);
 915
 916         IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
 917
 918         iobase = self->io.sir_base;
 919
 920         /* Finished with frame?  */
 921         if (self->tx_buff.len > 0)
 922         {
 923                 /* Write data left in transmit buffer */
 924                 actual = ali_ircc_sir_write(iobase, self->io.fifo_size,
 925                                       self->tx_buff.data, self->tx_buff.len);
 926                 self->tx_buff.data += actual;
 927                 self->tx_buff.len  -= actual;
 928         }
 929         else
 930         {
 931                 if (self->new_speed)
 932                 {
 933                         /* We must wait until all data are gone */
 934                         while(!(inb(iobase+UART_LSR) & UART_LSR_TEMT))
 935                                 IRDA_DEBUG(1, "%s(), UART_LSR_THRE\n", __FUNCTION__ );
 936
 937                         IRDA_DEBUG(1, "%s(), Changing speed! self->new_speed = %d\n", __FUNCTION__ , self->new_speed);
 938                         ali_ircc_change_speed(self, self->new_speed);
 939                         self->new_speed = 0;
 940
 941                         // benjamin 2000/11/10 06:32PM
 942                         if (self->io.speed > 115200)
 943                         {
 944                                 IRDA_DEBUG(2, "%s(), ali_ircc_change_speed from UART_LSR_TEMT \n", __FUNCTION__ );
 945
 946                                 self->ier = IER_EOM;
 947                                 // SetCOMInterrupts(self, TRUE);
 948                                 return;
 949                         }
 950                 }
 951                 else
 952                 {
 953                         netif_wake_queue(self->netdev);
 954                 }
 955
 956                 self->stats.tx_packets++;
 957
 958                 /* Turn on receive interrupts */
 959                 outb(UART_IER_RDI, iobase+UART_IER);
 960         }
 961
 962         IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ );
 963 }
 964
 965 static void ali_ircc_change_speed(struct ali_ircc_cb *self, __u32 baud)
 966 {
 967         struct net_device *dev = self->netdev;
 968         int iobase;
 969
 970         IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
 971
 972         IRDA_DEBUG(2, "%s(), setting speed = %d \n", __FUNCTION__ , baud);
 973
 974         /* This function *must* be called with irq off and spin-lock.
 975          * - Jean II */
 976
 977         iobase = self->io.fir_base;
 978
 979         SetCOMInterrupts(self, FALSE); // 2000/11/24 11:43AM
 980
 981         /* Go to MIR, FIR Speed */
 982         if (baud > 115200)
 983         {
 984
 985
 986                 ali_ircc_fir_change_speed(self, baud);
 987
 988                 /* Install FIR xmit handler*/
 989                 dev->hard_start_xmit = ali_ircc_fir_hard_xmit;
 990
 991                 /* Enable Interuupt */
 992                 self->ier = IER_EOM; // benjamin 2000/11/20 07:24PM
 993
 994                 /* Be ready for incomming frames */
 995                 ali_ircc_dma_receive(self);     // benajmin 2000/11/8 07:46PM not complete
 996         }
 997         /* Go to SIR Speed */
 998         else
 999         {
1000                 ali_ircc_sir_change_speed(self, baud);
1001
1002                 /* Install SIR xmit handler*/
1003                 dev->hard_start_xmit = ali_ircc_sir_hard_xmit;
1004         }
1005
1006
1007         SetCOMInterrupts(self, TRUE);   // 2000/11/24 11:43AM
1008
1009         netif_wake_queue(self->netdev);
1010
1011         IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ );
1012 }
1013
1014 static void ali_ircc_fir_change_speed(struct ali_ircc_cb *priv, __u32 baud)
1015 {
1016
1017         int iobase;
1018         struct ali_ircc_cb *self = (struct ali_ircc_cb *) priv;
1019         struct net_device *dev;
1020
1021         IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
1022
1023         IRDA_ASSERT(self != NULL, return;);
1024
1025         dev = self->netdev;
1026         iobase = self->io.fir_base;
1027
1028         IRDA_DEBUG(1, "%s(), self->io.speed = %d, change to speed = %d\n", __FUNCTION__ ,self->io.speed,baud);
1029
1030         /* Come from SIR speed */
1031         if(self->io.speed <=115200)
1032         {
1033                 SIR2FIR(iobase);
1034         }
1035
1036         /* Update accounting for new speed */
1037         self->io.speed = baud;
1038
1039         // Set Dongle Speed mode
1040         ali_ircc_change_dongle_speed(self, baud);
1041
1042         IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ );
1043 }
1044
1045 /*
1046  * Function ali_sir_change_speed (self, speed)
1047  *
1048  *    Set speed of IrDA port to specified baudrate
1049  *
1050  */
1051 static void ali_ircc_sir_change_speed(struct ali_ircc_cb *priv, __u32 speed)
1052 {
1053         struct ali_ircc_cb *self = (struct ali_ircc_cb *) priv;
1054         unsigned long flags;
1055         int iobase;
1056         int fcr;    /* FIFO control reg */
1057         int lcr;    /* Line control reg */
1058         int divisor;
1059
1060         IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
1061
1062         IRDA_DEBUG(1, "%s(), Setting speed to: %d\n", __FUNCTION__ , speed);
1063
1064         IRDA_ASSERT(self != NULL, return;);
1065
1066         iobase = self->io.sir_base;
1067
1068         /* Come from MIR or FIR speed */
1069         if(self->io.speed >115200)
1070         {
1071                 // Set Dongle Speed mode first
1072                 ali_ircc_change_dongle_speed(self, speed);
1073
1074                 FIR2SIR(iobase);
1075         }
1076
1077         // Clear Line and Auxiluary status registers 2000/11/24 11:47AM
1078
1079         inb(iobase+UART_LSR);
1080         inb(iobase+UART_SCR);
1081
1082         /* Update accounting for new speed */
1083         self->io.speed = speed;
1084
1085         spin_lock_irqsave(&self->lock, flags);
1086
1087         divisor = 115200/speed;
1088
1089         fcr = UART_FCR_ENABLE_FIFO;
1090
1091         /*
1092          * Use trigger level 1 to avoid 3 ms. timeout delay at 9600 bps, and
1093          * almost 1,7 ms at 19200 bps. At speeds above that we can just forget
1094          * about this timeout since it will always be fast enough.
1095          */
1096         if (self->io.speed < 38400)
1097                 fcr |= UART_FCR_TRIGGER_1;
1098         else
1099                 fcr |= UART_FCR_TRIGGER_14;
1100
1101         /* IrDA ports use 8N1 */
1102         lcr = UART_LCR_WLEN8;
1103
1104         outb(UART_LCR_DLAB | lcr, iobase+UART_LCR); /* Set DLAB */
1105         outb(divisor & 0xff,      iobase+UART_DLL); /* Set speed */
1106         outb(divisor >> 8,        iobase+UART_DLM);
1107         outb(lcr,                 iobase+UART_LCR); /* Set 8N1  */
1108         outb(fcr,                 iobase+UART_FCR); /* Enable FIFO's */
1109
1110         /* without this, the conection will be broken after come back from FIR speed,
1111            but with this, the SIR connection is harder to established */
1112         outb((UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2), iobase+UART_MCR);
1113
1114         spin_unlock_irqrestore(&self->lock, flags);
1115
1116         IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ );
1117 }
1118
1119 static void ali_ircc_change_dongle_speed(struct ali_ircc_cb *priv, int speed)
1120 {
1121
1122         struct ali_ircc_cb *self = (struct ali_ircc_cb *) priv;
1123         int iobase,dongle_id;
1124         int tmp = 0;
1125
1126         IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
1127
1128         iobase = self->io.fir_base;     /* or iobase = self->io.sir_base; */
1129         dongle_id = self->io.dongle_id;
1130
1131         /* We are already locked, no need to do it again */
1132
1133         IRDA_DEBUG(1, "%s(), Set Speed for %s , Speed = %d\n", __FUNCTION__ , dongle_types[dongle_id], speed);
1134
1135         switch_bank(iobase, BANK2);
1136         tmp = inb(iobase+FIR_IRDA_CR);
1137
1138         /* IBM type dongle */
1139         if(dongle_id == 0)
1140         {
1141                 if(speed == 4000000)
1142                 {
1143                         //            __ __
1144                         // SD/MODE __|     |__ __
1145                         //               __ __
1146                         // IRTX    __ __|     |__
1147                         //         T1 T2 T3 T4 T5
1148
1149                         tmp &=  ~IRDA_CR_HDLC;          // HDLC=0
1150                         tmp |= IRDA_CR_CRC;             // CRC=1
1151
1152                         switch_bank(iobase, BANK2);
1153                         outb(tmp, iobase+FIR_IRDA_CR);
1154
1155                         // T1 -> SD/MODE:0 IRTX:0
1156                         tmp &= ~0x09;
1157                         tmp |= 0x02;
1158                         outb(tmp, iobase+FIR_IRDA_CR);
1159                         udelay(2);
1160
1161                         // T2 -> SD/MODE:1 IRTX:0
1162                         tmp &= ~0x01;
1163                         tmp |= 0x0a;
1164                         outb(tmp, iobase+FIR_IRDA_CR);
1165                         udelay(2);
1166
1167                         // T3 -> SD/MODE:1 IRTX:1
1168                         tmp |= 0x0b;
1169                         outb(tmp, iobase+FIR_IRDA_CR);
1170                         udelay(2);
1171
1172                         // T4 -> SD/MODE:0 IRTX:1
1173                         tmp &= ~0x08;
1174                         tmp |= 0x03;
1175                         outb(tmp, iobase+FIR_IRDA_CR);
1176                         udelay(2);
1177
1178                         // T5 -> SD/MODE:0 IRTX:0
1179                         tmp &= ~0x09;
1180                         tmp |= 0x02;
1181                         outb(tmp, iobase+FIR_IRDA_CR);
1182                         udelay(2);
1183
1184                         // reset -> Normal TX output Signal
1185                         outb(tmp & ~0x02, iobase+FIR_IRDA_CR);
1186                 }
1187                 else /* speed <=1152000 */
1188                 {
1189                         //            __
1190                         // SD/MODE __|  |__
1191                         //
1192                         // IRTX    ________
1193                         //         T1 T2 T3
1194
1195                         /* MIR 115200, 57600 */
1196                         if (speed==1152000)
1197                         {
1198                                 tmp |= 0xA0;       //HDLC=1, 1.152Mbps=1
1199                         }
1200                         else
1201                         {
1202                                 tmp &=~0x80;       //HDLC 0.576Mbps
1203                                 tmp |= 0x20;       //HDLC=1,
1204                         }
1205
1206                         tmp |= IRDA_CR_CRC;             // CRC=1
1207
1208                         switch_bank(iobase, BANK2);
1209                         outb(tmp, iobase+FIR_IRDA_CR);
1210
1211                         /* MIR 115200, 57600 */
1212
1213                         //switch_bank(iobase, BANK2);
1214                         // T1 -> SD/MODE:0 IRTX:0
1215                         tmp &= ~0x09;
1216                         tmp |= 0x02;
1217                         outb(tmp, iobase+FIR_IRDA_CR);
1218                         udelay(2);
1219
1220                         // T2 -> SD/MODE:1 IRTX:0
1221                         tmp &= ~0x01;
1222                         tmp |= 0x0a;
1223                         outb(tmp, iobase+FIR_IRDA_CR);
1224
1225                         // T3 -> SD/MODE:0 IRTX:0
1226                         tmp &= ~0x09;
1227                         tmp |= 0x02;
1228                         outb(tmp, iobase+FIR_IRDA_CR);
1229                         udelay(2);
1230
1231                         // reset -> Normal TX output Signal
1232                         outb(tmp & ~0x02, iobase+FIR_IRDA_CR);
1233                 }
1234         }
1235         else if (dongle_id == 1) /* HP HDSL-3600 */
1236         {
1237                 switch(speed)
1238                 {
1239                 case 4000000:
1240                         tmp &=  ~IRDA_CR_HDLC;  // HDLC=0
1241                         break;
1242
1243                 case 1152000:
1244                         tmp |= 0xA0;            // HDLC=1, 1.152Mbps=1
1245                         break;
1246
1247                 case 576000:
1248                         tmp &=~0x80;            // HDLC 0.576Mbps
1249                         tmp |= 0x20;            // HDLC=1,
1250                         break;
1251                 }
1252
1253                 tmp |= IRDA_CR_CRC;             // CRC=1
1254
1255                 switch_bank(iobase, BANK2);
1256                 outb(tmp, iobase+FIR_IRDA_CR);
1257         }
1258         else /* HP HDSL-1100 */
1259         {
1260                 if(speed <= 115200) /* SIR */
1261                 {
1262
1263                         tmp &= ~IRDA_CR_FIR_SIN;        // HP sin select = 0
1264
1265                         switch_bank(iobase, BANK2);
1266                         outb(tmp, iobase+FIR_IRDA_CR);
1267                 }
1268                 else /* MIR FIR */
1269                 {
1270
1271                         switch(speed)
1272                         {
1273                         case 4000000:
1274                                 tmp &=  ~IRDA_CR_HDLC;  // HDLC=0
1275                                 break;
1276
1277                         case 1152000:
1278                                 tmp |= 0xA0;            // HDLC=1, 1.152Mbps=1
1279                                 break;
1280
1281                         case 576000:
1282                                 tmp &=~0x80;            // HDLC 0.576Mbps
1283                                 tmp |= 0x20;            // HDLC=1,
1284                                 break;
1285                         }
1286
1287                         tmp |= IRDA_CR_CRC;             // CRC=1
1288                         tmp |= IRDA_CR_FIR_SIN;         // HP sin select = 1
1289
1290                         switch_bank(iobase, BANK2);
1291                         outb(tmp, iobase+FIR_IRDA_CR);
1292                 }
1293         }
1294
1295         switch_bank(iobase, BANK0);
1296
1297         IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ );
1298 }
1299
1300 /*
1301  * Function ali_ircc_sir_write (driver)
1302  *
1303  *    Fill Tx FIFO with transmit data
1304  *
1305  */
1306 static int ali_ircc_sir_write(int iobase, int fifo_size, __u8 *buf, int len)
1307 {
1308         int actual = 0;
1309
1310         IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
1311
1312         /* Tx FIFO should be empty! */
1313         if (!(inb(iobase+UART_LSR) & UART_LSR_THRE)) {
1314                 IRDA_DEBUG(0, "%s(), failed, fifo not empty!\n", __FUNCTION__ );
1315                 return 0;
1316         }
1317
1318         /* Fill FIFO with current frame */
1319         while ((fifo_size-- > 0) && (actual < len)) {
1320                 /* Transmit next byte */
1321                 outb(buf[actual], iobase+UART_TX);
1322
1323                 actual++;
1324         }
1325
1326         IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ );
1327         return actual;
1328 }
1329
1330 /*
1331  * Function ali_ircc_net_open (dev)
1332  *
1333  *    Start the device
1334  *
1335  */
1336 static int ali_ircc_net_open(struct net_device *dev)
1337 {
1338         struct ali_ircc_cb *self;
1339         int iobase;
1340         char hwname[32];
1341
1342         IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
1343
1344         IRDA_ASSERT(dev != NULL, return -1;);
1345
1346         self = (struct ali_ircc_cb *) dev->priv;
1347
1348         IRDA_ASSERT(self != NULL, return 0;);
1349
1350         iobase = self->io.fir_base;
1351
1352         /* Request IRQ and install Interrupt Handler */
1353         if (request_irq(self->io.irq, ali_ircc_interrupt, 0, dev->name, dev))
1354         {
1355                 IRDA_WARNING("%s, unable to allocate irq=%d\n",
1356                              ALI_IRCC_DRIVER_NAME,
1357                              self->io.irq);
1358                 return -EAGAIN;
1359         }
1360
1361         /*
1362          * Always allocate the DMA channel after the IRQ, and clean up on
1363          * failure.
1364          */
1365         if (request_dma(self->io.dma, dev->name)) {
1366                 IRDA_WARNING("%s, unable to allocate dma=%d\n",
1367                              ALI_IRCC_DRIVER_NAME,
1368                              self->io.dma);
1369                 free_irq(self->io.irq, self);
1370                 return -EAGAIN;
1371         }
1372
1373         /* Turn on interrups */
1374         outb(UART_IER_RDI , iobase+UART_IER);
1375
1376         /* Ready to play! */
1377         netif_start_queue(dev); //benjamin by irport
1378
1379         /* Give self a hardware name */
1380         sprintf(hwname, "ALI-FIR @ 0x%03x", self->io.fir_base);
1381
1382         /*
1383          * Open new IrLAP layer instance, now that everything should be
1384          * initialized properly
1385          */
1386         self->irlap = irlap_open(dev, &self->qos, hwname);
1387
1388         IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ );
1389
1390         return 0;
1391 }
1392
1393 /*
1394  * Function ali_ircc_net_close (dev)
1395  *
1396  *    Stop the device
1397  *
1398  */
1399 static int ali_ircc_net_close(struct net_device *dev)
1400 {
1401
1402         struct ali_ircc_cb *self;
1403         //int iobase;
1404
1405         IRDA_DEBUG(4, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
1406
1407         IRDA_ASSERT(dev != NULL, return -1;);
1408
1409         self = (struct ali_ircc_cb *) dev->priv;
1410         IRDA_ASSERT(self != NULL, return 0;);
1411
1412         /* Stop device */
1413         netif_stop_queue(dev);
1414
1415         /* Stop and remove instance of IrLAP */
1416         if (self->irlap)
1417                 irlap_close(self->irlap);
1418         self->irlap = NULL;
1419
1420         disable_dma(self->io.dma);
1421
1422         /* Disable interrupts */
1423         SetCOMInterrupts(self, FALSE);
1424
1425         free_irq(self->io.irq, dev);
1426         free_dma(self->io.dma);
1427
1428         IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ );
1429
1430         return 0;
1431 }
1432
1433 /*
1434  * Function ali_ircc_fir_hard_xmit (skb, dev)
1435  *
1436  *    Transmit the frame
1437  *
1438  */
1439 static int ali_ircc_fir_hard_xmit(struct sk_buff *skb, struct net_device *dev)
1440 {
1441         struct ali_ircc_cb *self;
1442         unsigned long flags;
1443         int iobase;
1444         __u32 speed;
1445         int mtt, diff;
1446
1447         IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __FUNCTION__ );
1448
1449         self = (struct ali_ircc_cb *) dev->priv;
1450         iobase = self->io.fir_base;
1451
1452         netif_stop_queue(dev);
1453
1454         /* Make sure tests *& speed change are atomic */
1455         spin_lock_irqsave(&self->lock, flags);
1456
1457         /* Note : you should make sure that speed changes are not going
1458          * to corrupt any outgoing frame. Look at nsc-ircc for the gory
1459          * details - Jean II */
1460
1461         /* Check if we need to change the speed */
1462         speed = irda_get_next_speed(skb);
1463         if ((speed != self->io.speed) && (speed != -1)) {
1464                 /* Check for empty frame */
1465                 if (!skb->len) {
1466                         ali_ircc_change_speed(self, speed);
1467                         dev->trans_start = jiffies;
1468                         spin_unlock_irqrestore(&self->lock, flags);
1469                         dev_kfree_skb(skb);
1470                         return 0;
1471                 } else
1472                         self->new_speed = speed;
1473         }
1474
1475         /* Register and copy this frame to DMA memory */
1476         self->tx_fifo.queue[self->tx_fifo.free].start = self->tx_fifo.tail;
1477         self->tx_fifo.queue[self->tx_fifo.free].len = skb->len;
1478         self->tx_fifo.tail += skb->len;
1479
1480         self->stats.tx_bytes += skb->len;
1481
1482         memcpy(self->tx_fifo.queue[self->tx_fifo.free].start, skb->data,
1483                skb->len);
1484
1485         self->tx_fifo.len++;
1486         self->tx_fifo.free++;
1487
1488         /* Start transmit only if there is currently no transmit going on */
1489         if (self->tx_fifo.len == 1)
1490         {
1491                 /* Check if we must wait the min turn time or not */
1492                 mtt = irda_get_mtt(skb);
1493
1494                 if (mtt)
1495                 {
1496                         /* Check how much time we have used already */
1497                         do_gettimeofday(&self->now);
1498
1499                         diff = self->now.tv_usec - self->stamp.tv_usec;
1500                         /* self->stamp is set from ali_ircc_dma_receive_complete() */
1501
1502                         IRDA_DEBUG(1, "%s(), ******* diff = %d ******* \n", __FUNCTION__ , diff);
1503
1504                         if (diff < 0)
1505                                 diff += 1000000;
1506
1507                         /* Check if the mtt is larger than the time we have
1508                          * already used by all the protocol processing
1509                          */
1510                         if (mtt > diff)
1511                         {
1512                                 mtt -= diff;
1513
1514                                 /*
1515                                  * Use timer if delay larger than 1000 us, and
1516                                  * use udelay for smaller values which should
1517                                  * be acceptable
1518                                  */
1519                                 if (mtt > 500)
1520                                 {
1521                                         /* Adjust for timer resolution */
1522                                         mtt = (mtt+250) / 500;  /* 4 discard, 5 get advanced, Let's round off */
1523
1524                                         IRDA_DEBUG(1, "%s(), ************** mtt = %d ***********\n", __FUNCTION__ , mtt);
1525
1526                                         /* Setup timer */
1527                                         if (mtt == 1) /* 500 us */
1528                                         {
1529                                                 switch_bank(iobase, BANK1);
1530                                                 outb(TIMER_IIR_500, iobase+FIR_TIMER_IIR);
1531                                         }
1532                                         else if (mtt == 2) /* 1 ms */
1533                                         {
1534                                                 switch_bank(iobase, BANK1);
1535                                                 outb(TIMER_IIR_1ms, iobase+FIR_TIMER_IIR);
1536                                         }
1537                                         else /* > 2ms -> 4ms */
1538                                         {
1539                                                 switch_bank(iobase, BANK1);
1540                                                 outb(TIMER_IIR_2ms, iobase+FIR_TIMER_IIR);
1541                                         }
1542
1543
1544                                         /* Start timer */
1545                                         outb(inb(iobase+FIR_CR) | CR_TIMER_EN, iobase+FIR_CR);
1546                                         self->io.direction = IO_XMIT;
1547
1548                                         /* Enable timer interrupt */
1549                                         self->ier = IER_TIMER;
1550                                         SetCOMInterrupts(self, TRUE);
1551
1552                                         /* Timer will take care of the rest */
1553                                         goto out;
1554                                 }
1555                                 else
1556                                         udelay(mtt);
1557                         } // if (if (mtt > diff)
1558                 }// if (mtt)
1559
1560                 /* Enable EOM interrupt */
1561                 self->ier = IER_EOM;
1562                 SetCOMInterrupts(self, TRUE);
1563
1564                 /* Transmit frame */
1565                 ali_ircc_dma_xmit(self);
1566         } // if (self->tx_fifo.len == 1)
1567
1568  out:
1569
1570         /* Not busy transmitting anymore if window is not full */
1571         if (self->tx_fifo.free < MAX_TX_WINDOW)
1572                 netif_wake_queue(self->netdev);
1573
1574         /* Restore bank register */
1575         switch_bank(iobase, BANK0);
1576
1577         dev->trans_start = jiffies;
1578         spin_unlock_irqrestore(&self->lock, flags);
1579         dev_kfree_skb(skb);
1580
1581         IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ );
1582         return 0;
1583 }
1584
1585
1586 static void ali_ircc_dma_xmit(struct ali_ircc_cb *self)
1587 {
1588         int iobase, tmp;
1589         unsigned char FIFO_OPTI, Hi, Lo;
1590
1591
1592         IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __FUNCTION__ );
1593
1594         iobase = self->io.fir_base;
1595
1596         /* FIFO threshold , this method comes from NDIS5 code */
1597
1598         if(self->tx_fifo.queue[self->tx_fifo.ptr].len < TX_FIFO_Threshold)
1599                 FIFO_OPTI = self->tx_fifo.queue[self->tx_fifo.ptr].len-1;
1600         else
1601                 FIFO_OPTI = TX_FIFO_Threshold;
1602
1603         /* Disable DMA */
1604         switch_bank(iobase, BANK1);
1605         outb(inb(iobase+FIR_CR) & ~CR_DMA_EN, iobase+FIR_CR);
1606
1607         self->io.direction = IO_XMIT;
1608
1609         irda_setup_dma(self->io.dma,
1610                        ((u8 *)self->tx_fifo.queue[self->tx_fifo.ptr].start -
1611                         self->tx_buff.head) + self->tx_buff_dma,
1612                        self->tx_fifo.queue[self->tx_fifo.ptr].len,
1613                        DMA_TX_MODE);
1614
1615         /* Reset Tx FIFO */
1616         switch_bank(iobase, BANK0);
1617         outb(LCR_A_FIFO_RESET, iobase+FIR_LCR_A);
1618
1619         /* Set Tx FIFO threshold */
1620         if (self->fifo_opti_buf!=FIFO_OPTI)
1621         {
1622                 switch_bank(iobase, BANK1);
1623                 outb(FIFO_OPTI, iobase+FIR_FIFO_TR) ;
1624                 self->fifo_opti_buf=FIFO_OPTI;
1625         }
1626
1627         /* Set Tx DMA threshold */
1628         switch_bank(iobase, BANK1);
1629         outb(TX_DMA_Threshold, iobase+FIR_DMA_TR);
1630
1631         /* Set max Tx frame size */
1632         Hi = (self->tx_fifo.queue[self->tx_fifo.ptr].len >> 8) & 0x0f;
1633         Lo = self->tx_fifo.queue[self->tx_fifo.ptr].len & 0xff;
1634         switch_bank(iobase, BANK2);
1635         outb(Hi, iobase+FIR_TX_DSR_HI);
1636         outb(Lo, iobase+FIR_TX_DSR_LO);
1637
1638         /* Disable SIP , Disable Brick Wall (we don't support in TX mode), Change to TX mode */
1639         switch_bank(iobase, BANK0);
1640         tmp = inb(iobase+FIR_LCR_B);
1641         tmp &= ~0x20; // Disable SIP
1642         outb(((unsigned char)(tmp & 0x3f) | LCR_B_TX_MODE) & ~LCR_B_BW, iobase+FIR_LCR_B);
1643         IRDA_DEBUG(1, "%s(), ******* Change to TX mode: FIR_LCR_B = 0x%x ******* \n", __FUNCTION__ , inb(iobase+FIR_LCR_B));
1644
1645         outb(0, iobase+FIR_LSR);
1646
1647         /* Enable DMA and Burst Mode */
1648         switch_bank(iobase, BANK1);
1649         outb(inb(iobase+FIR_CR) | CR_DMA_EN | CR_DMA_BURST, iobase+FIR_CR);
1650
1651         switch_bank(iobase, BANK0);
1652
1653         IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ );
1654 }
1655
1656 static int  ali_ircc_dma_xmit_complete(struct ali_ircc_cb *self)
1657 {
1658         int iobase;
1659         int ret = TRUE;
1660
1661         IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __FUNCTION__ );
1662
1663         iobase = self->io.fir_base;
1664
1665         /* Disable DMA */
1666         switch_bank(iobase, BANK1);
1667         outb(inb(iobase+FIR_CR) & ~CR_DMA_EN, iobase+FIR_CR);
1668
1669         /* Check for underrun! */
1670         switch_bank(iobase, BANK0);
1671         if((inb(iobase+FIR_LSR) & LSR_FRAME_ABORT) == LSR_FRAME_ABORT)
1672
1673         {
1674                 IRDA_ERROR("%s(), ********* LSR_FRAME_ABORT *********\n", __FUNCTION__);
1675                 self->stats.tx_errors++;
1676                 self->stats.tx_fifo_errors++;
1677         }
1678         else
1679         {
1680                 self->stats.tx_packets++;
1681         }
1682
1683         /* Check if we need to change the speed */
1684         if (self->new_speed)
1685         {
1686                 ali_ircc_change_speed(self, self->new_speed);
1687                 self->new_speed = 0;
1688         }
1689
1690         /* Finished with this frame, so prepare for next */
1691         self->tx_fifo.ptr++;
1692         self->tx_fifo.len--;
1693
1694         /* Any frames to be sent back-to-back? */
1695         if (self->tx_fifo.len)
1696         {
1697                 ali_ircc_dma_xmit(self);
1698
1699                 /* Not finished yet! */
1700                 ret = FALSE;
1701         }
1702         else
1703         {       /* Reset Tx FIFO info */
1704                 self->tx_fifo.len = self->tx_fifo.ptr = self->tx_fifo.free = 0;
1705                 self->tx_fifo.tail = self->tx_buff.head;
1706         }
1707
1708         /* Make sure we have room for more frames */
1709         if (self->tx_fifo.free < MAX_TX_WINDOW) {
1710                 /* Not busy transmitting anymore */
1711                 /* Tell the network layer, that we can accept more frames */
1712                 netif_wake_queue(self->netdev);
1713         }
1714
1715         switch_bank(iobase, BANK0);
1716
1717         IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ );
1718         return ret;
1719 }
1720
1721 /*
1722  * Function ali_ircc_dma_receive (self)
1723  *
1724  *    Get ready for receiving a frame. The device will initiate a DMA
1725  *    if it starts to receive a frame.
1726  *
1727  */
1728 static int ali_ircc_dma_receive(struct ali_ircc_cb *self)
1729 {
1730         int iobase, tmp;
1731
1732         IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __FUNCTION__ );
1733
1734         iobase = self->io.fir_base;
1735
1736         /* Reset Tx FIFO info */
1737         self->tx_fifo.len = self->tx_fifo.ptr = self->tx_fifo.free = 0;
1738         self->tx_fifo.tail = self->tx_buff.head;
1739
1740         /* Disable DMA */
1741         switch_bank(iobase, BANK1);
1742         outb(inb(iobase+FIR_CR) & ~CR_DMA_EN, iobase+FIR_CR);
1743
1744         /* Reset Message Count */
1745         switch_bank(iobase, BANK0);
1746         outb(0x07, iobase+FIR_LSR);
1747
1748         self->rcvFramesOverflow = FALSE;
1749
1750         self->LineStatus = inb(iobase+FIR_LSR) ;
1751
1752         /* Reset Rx FIFO info */
1753         self->io.direction = IO_RECV;
1754         self->rx_buff.data = self->rx_buff.head;
1755
1756         /* Reset Rx FIFO */
1757         // switch_bank(iobase, BANK0);
1758         outb(LCR_A_FIFO_RESET, iobase+FIR_LCR_A);
1759
1760         self->st_fifo.len = self->st_fifo.pending_bytes = 0;
1761         self->st_fifo.tail = self->st_fifo.head = 0;
1762
1763         irda_setup_dma(self->io.dma, self->rx_buff_dma, self->rx_buff.truesize,
1764                        DMA_RX_MODE);
1765
1766         /* Set Receive Mode,Brick Wall */
1767         //switch_bank(iobase, BANK0);
1768         tmp = inb(iobase+FIR_LCR_B);
1769         outb((unsigned char)(tmp &0x3f) | LCR_B_RX_MODE | LCR_B_BW , iobase + FIR_LCR_B); // 2000/12/1 05:16PM
1770         IRDA_DEBUG(1, "%s(), *** Change To RX mode: FIR_LCR_B = 0x%x *** \n", __FUNCTION__ , inb(iobase+FIR_LCR_B));
1771
1772         /* Set Rx Threshold */
1773         switch_bank(iobase, BANK1);
1774         outb(RX_FIFO_Threshold, iobase+FIR_FIFO_TR);
1775         outb(RX_DMA_Threshold, iobase+FIR_DMA_TR);
1776
1777         /* Enable DMA and Burst Mode */
1778         // switch_bank(iobase, BANK1);
1779         outb(CR_DMA_EN | CR_DMA_BURST, iobase+FIR_CR);
1780
1781         switch_bank(iobase, BANK0);
1782         IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ );
1783         return 0;
1784 }
1785
1786 static int  ali_ircc_dma_receive_complete(struct ali_ircc_cb *self)
1787 {
1788         struct st_fifo *st_fifo;
1789         struct sk_buff *skb;
1790         __u8 status, MessageCount;
1791         int len, i, iobase, val;
1792
1793         IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __FUNCTION__ );
1794
1795         st_fifo = &self->st_fifo;
1796         iobase = self->io.fir_base;
1797
1798         switch_bank(iobase, BANK0);
1799         MessageCount = inb(iobase+ FIR_LSR)&0x07;
1800
1801         if (MessageCount > 0)
1802                 IRDA_DEBUG(0, "%s(), Messsage count = %d,\n", __FUNCTION__ , MessageCount);
1803
1804         for (i=0; i<=MessageCount; i++)
1805         {
1806                 /* Bank 0 */
1807                 switch_bank(iobase, BANK0);
1808                 status = inb(iobase+FIR_LSR);
1809
1810                 switch_bank(iobase, BANK2);
1811                 len = inb(iobase+FIR_RX_DSR_HI) & 0x0f;
1812                 len = len << 8;
1813                 len |= inb(iobase+FIR_RX_DSR_LO);
1814
1815                 IRDA_DEBUG(1, "%s(), RX Length = 0x%.2x,\n", __FUNCTION__ , len);
1816                 IRDA_DEBUG(1, "%s(), RX Status = 0x%.2x,\n", __FUNCTION__ , status);
1817
1818                 if (st_fifo->tail >= MAX_RX_WINDOW) {
1819                         IRDA_DEBUG(0, "%s(), window is full!\n", __FUNCTION__ );
1820                         continue;
1821                 }
1822
1823                 st_fifo->entries[st_fifo->tail].status = status;
1824                 st_fifo->entries[st_fifo->tail].len = len;
1825                 st_fifo->pending_bytes += len;
1826                 st_fifo->tail++;
1827                 st_fifo->len++;
1828         }
1829
1830         for (i=0; i<=MessageCount; i++)
1831         {
1832                 /* Get first entry */
1833                 status = st_fifo->entries[st_fifo->head].status;
1834                 len    = st_fifo->entries[st_fifo->head].len;
1835                 st_fifo->pending_bytes -= len;
1836                 st_fifo->head++;
1837                 st_fifo->len--;
1838
1839                 /* Check for errors */
1840                 if ((status & 0xd8) || self->rcvFramesOverflow || (len==0))
1841                 {
1842                         IRDA_DEBUG(0,"%s(), ************* RX Errors ************ \n", __FUNCTION__ );
1843
1844                         /* Skip frame */
1845                         self->stats.rx_errors++;
1846
1847                         self->rx_buff.data += len;
1848
1849                         if (status & LSR_FIFO_UR)
1850                         {
1851                                 self->stats.rx_frame_errors++;
1852                                 IRDA_DEBUG(0,"%s(), ************* FIFO Errors ************ \n", __FUNCTION__ );
1853                         }
1854                         if (status & LSR_FRAME_ERROR)
1855                         {
1856                                 self->stats.rx_frame_errors++;
1857                                 IRDA_DEBUG(0,"%s(), ************* FRAME Errors ************ \n", __FUNCTION__ );
1858                         }
1859
1860                         if (status & LSR_CRC_ERROR)
1861                         {
1862                                 self->stats.rx_crc_errors++;
1863                                 IRDA_DEBUG(0,"%s(), ************* CRC Errors ************ \n", __FUNCTION__ );
1864                         }
1865
1866                         if(self->rcvFramesOverflow)
1867                         {
1868                                 self->stats.rx_frame_errors++;
1869                                 IRDA_DEBUG(0,"%s(), ************* Overran DMA buffer ************ \n", __FUNCTION__ );
1870                         }
1871                         if(len == 0)
1872                         {
1873                                 self->stats.rx_frame_errors++;
1874                                 IRDA_DEBUG(0,"%s(), ********** Receive Frame Size = 0 ********* \n", __FUNCTION__ );
1875                         }
1876                 }
1877                 else
1878                 {
1879
1880                         if (st_fifo->pending_bytes < 32)
1881                         {
1882                                 switch_bank(iobase, BANK0);
1883                                 val = inb(iobase+FIR_BSR);
1884                                 if ((val& BSR_FIFO_NOT_EMPTY)== 0x80)
1885                                 {
1886                                         IRDA_DEBUG(0, "%s(), ************* BSR_FIFO_NOT_EMPTY ************ \n", __FUNCTION__ );
1887
1888                                         /* Put this entry back in fifo */
1889                                         st_fifo->head--;
1890                                         st_fifo->len++;
1891                                         st_fifo->pending_bytes += len;
1892                                         st_fifo->entries[st_fifo->head].status = status;
1893                                         st_fifo->entries[st_fifo->head].len = len;
1894
1895                                         /*
1896                                         * DMA not finished yet, so try again
1897                                         * later, set timer value, resolution
1898                                         * 500 us
1899                                         */
1900
1901                                         switch_bank(iobase, BANK1);
1902                                         outb(TIMER_IIR_500, iobase+FIR_TIMER_IIR); // 2001/1/2 05:07PM
1903
1904                                         /* Enable Timer */
1905                                         outb(inb(iobase+FIR_CR) | CR_TIMER_EN, iobase+FIR_CR);
1906
1907                                         return FALSE; /* I'll be back! */
1908                                 }
1909                         }
1910
1911                         /*
1912                          * Remember the time we received this frame, so we can
1913                          * reduce the min turn time a bit since we will know
1914                          * how much time we have used for protocol processing
1915                          */
1916                         do_gettimeofday(&self->stamp);
1917
1918                         skb = dev_alloc_skb(len+1);
1919                         if (skb == NULL)
1920                         {
1921                                 IRDA_WARNING("%s(), memory squeeze, "
1922                                              "dropping frame.\n",
1923                                              __FUNCTION__);
1924                                 self->stats.rx_dropped++;
1925
1926                                 return FALSE;
1927                         }
1928
1929                         /* Make sure IP header gets aligned */
1930                         skb_reserve(skb, 1);
1931
1932                         /* Copy frame without CRC, CRC is removed by hardware*/
1933                         skb_put(skb, len);
1934                         memcpy(skb->data, self->rx_buff.data, len);
1935
1936                         /* Move to next frame */
1937                         self->rx_buff.data += len;
1938                         self->stats.rx_bytes += len;
1939                         self->stats.rx_packets++;
1940
1941                         skb->dev = self->netdev;
1942                         skb->mac.raw  = skb->data;
1943                         skb->protocol = htons(ETH_P_IRDA);
1944                         netif_rx(skb);
1945                         self->netdev->last_rx = jiffies;
1946                 }
1947         }
1948
1949         switch_bank(iobase, BANK0);
1950
1951         IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ );
1952         return TRUE;
1953 }
1954
1955
1956
1957 /*
1958  * Function ali_ircc_sir_hard_xmit (skb, dev)
1959  *
1960  *    Transmit the frame!
1961  *
1962  */
1963 static int ali_ircc_sir_hard_xmit(struct sk_buff *skb, struct net_device *dev)
1964 {
1965         struct ali_ircc_cb *self;
1966         unsigned long flags;
1967         int iobase;
1968         __u32 speed;
1969
1970         IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
1971
1972         IRDA_ASSERT(dev != NULL, return 0;);
1973
1974         self = (struct ali_ircc_cb *) dev->priv;
1975         IRDA_ASSERT(self != NULL, return 0;);
1976
1977         iobase = self->io.sir_base;
1978
1979         netif_stop_queue(dev);
1980
1981         /* Make sure tests *& speed change are atomic */
1982         spin_lock_irqsave(&self->lock, flags);
1983
1984         /* Note : you should make sure that speed changes are not going
1985          * to corrupt any outgoing frame. Look at nsc-ircc for the gory
1986          * details - Jean II */
1987
1988         /* Check if we need to change the speed */
1989         speed = irda_get_next_speed(skb);
1990         if ((speed != self->io.speed) && (speed != -1)) {
1991                 /* Check for empty frame */
1992                 if (!skb->len) {
1993                         ali_ircc_change_speed(self, speed);
1994                         dev->trans_start = jiffies;
1995                         spin_unlock_irqrestore(&self->lock, flags);
1996                         dev_kfree_skb(skb);
1997                         return 0;
1998                 } else
1999                         self->new_speed = speed;
2000         }
2001
2002         /* Init tx buffer */
2003         self->tx_buff.data = self->tx_buff.head;
2004
2005         /* Copy skb to tx_buff while wrapping, stuffing and making CRC */
2006         self->tx_buff.len = async_wrap_skb(skb, self->tx_buff.data,
2007                                            self->tx_buff.truesize);
2008
2009         self->stats.tx_bytes += self->tx_buff.len;
2010
2011         /* Turn on transmit finished interrupt. Will fire immediately!  */
2012         outb(UART_IER_THRI, iobase+UART_IER);
2013
2014         dev->trans_start = jiffies;
2015         spin_unlock_irqrestore(&self->lock, flags);
2016
2017         dev_kfree_skb(skb);
2018
2019         IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ );
2020
2021         return 0;
2022 }
2023
2024
2025 /*
2026  * Function ali_ircc_net_ioctl (dev, rq, cmd)
2027  *
2028  *    Process IOCTL commands for this device
2029  *
2030  */
2031 static int ali_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
2032 {
2033         struct if_irda_req *irq = (struct if_irda_req *) rq;
2034         struct ali_ircc_cb *self;
2035         unsigned long flags;
2036         int ret = 0;
2037
2038         IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
2039
2040         IRDA_ASSERT(dev != NULL, return -1;);
2041
2042         self = dev->priv;
2043
2044         IRDA_ASSERT(self != NULL, return -1;);
2045
2046         IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __FUNCTION__ , dev->name, cmd);
2047
2048         switch (cmd) {
2049         case SIOCSBANDWIDTH: /* Set bandwidth */
2050                 IRDA_DEBUG(1, "%s(), SIOCSBANDWIDTH\n", __FUNCTION__ );
2051                 /*
2052                  * This function will also be used by IrLAP to change the
2053                  * speed, so we still must allow for speed change within
2054                  * interrupt context.
2055                  */
2056                 if (!in_interrupt() && !capable(CAP_NET_ADMIN))
2057                         return -EPERM;
2058
2059                 spin_lock_irqsave(&self->lock, flags);
2060                 ali_ircc_change_speed(self, irq->ifr_baudrate);
2061                 spin_unlock_irqrestore(&self->lock, flags);
2062                 break;
2063         case SIOCSMEDIABUSY: /* Set media busy */
2064                 IRDA_DEBUG(1, "%s(), SIOCSMEDIABUSY\n", __FUNCTION__ );
2065                 if (!capable(CAP_NET_ADMIN))
2066                         return -EPERM;
2067                 irda_device_set_media_busy(self->netdev, TRUE);
2068                 break;
2069         case SIOCGRECEIVING: /* Check if we are receiving right now */
2070                 IRDA_DEBUG(2, "%s(), SIOCGRECEIVING\n", __FUNCTION__ );
2071                 /* This is protected */
2072                 irq->ifr_receiving = ali_ircc_is_receiving(self);
2073                 break;
2074         default:
2075                 ret = -EOPNOTSUPP;
2076         }
2077
2078         IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ );
2079
2080         return ret;
2081 }
2082
2083 /*
2084  * Function ali_ircc_is_receiving (self)
2085  *
2086  *    Return TRUE is we are currently receiving a frame
2087  *
2088  */
2089 static int ali_ircc_is_receiving(struct ali_ircc_cb *self)
2090 {
2091         unsigned long flags;
2092         int status = FALSE;
2093         int iobase;
2094
2095         IRDA_DEBUG(2, "%s(), ---------------- Start -----------------\n", __FUNCTION__ );
2096
2097         IRDA_ASSERT(self != NULL, return FALSE;);
2098
2099         spin_lock_irqsave(&self->lock, flags);
2100
2101         if (self->io.speed > 115200)
2102         {
2103                 iobase = self->io.fir_base;
2104
2105                 switch_bank(iobase, BANK1);
2106                 if((inb(iobase+FIR_FIFO_FR) & 0x3f) != 0)
2107                 {
2108                         /* We are receiving something */
2109                         IRDA_DEBUG(1, "%s(), We are receiving something\n", __FUNCTION__ );
2110                         status = TRUE;
2111                 }
2112                 switch_bank(iobase, BANK0);
2113         }
2114         else
2115         {
2116                 status = (self->rx_buff.state != OUTSIDE_FRAME);
2117         }
2118
2119         spin_unlock_irqrestore(&self->lock, flags);
2120
2121         IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ );
2122
2123         return status;
2124 }
2125
2126 static struct net_device_stats *ali_ircc_net_get_stats(struct net_device *dev)
2127 {
2128         struct ali_ircc_cb *self = (struct ali_ircc_cb *) dev->priv;
2129
2130         IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
2131
2132         IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ );
2133
2134         return &self->stats;
2135 }
2136
2137 static int ali_ircc_suspend(struct platform_device *dev, pm_message_t state)
2138 {
2139         struct ali_ircc_cb *self = platform_get_drvdata(dev);
2140
2141         IRDA_MESSAGE("%s, Suspending\n", ALI_IRCC_DRIVER_NAME);
2142
2143         if (self->io.suspended)
2144                 return 0;
2145
2146         ali_ircc_net_close(self->netdev);
2147
2148         self->io.suspended = 1;
2149
2150         return 0;
2151 }
2152
2153 static int ali_ircc_resume(struct platform_device *dev)
2154 {
2155         struct ali_ircc_cb *self = platform_get_drvdata(dev);
2156
2157         if (!self->io.suspended)
2158                 return 0;
2159
2160         ali_ircc_net_open(self->netdev);
2161
2162         IRDA_MESSAGE("%s, Waking up\n", ALI_IRCC_DRIVER_NAME);
2163
2164         self->io.suspended = 0;
2165
2166         return 0;
2167 }
2168
2169 /* ALi Chip Function */
2170
2171 static void SetCOMInterrupts(struct ali_ircc_cb *self , unsigned char enable)
2172 {
2173
2174         unsigned char newMask;
2175
2176         int iobase = self->io.fir_base; /* or sir_base */
2177
2178         IRDA_DEBUG(2, "%s(), -------- Start -------- ( Enable = %d )\n", __FUNCTION__ , enable);
2179
2180         /* Enable the interrupt which we wish to */
2181         if (enable){
2182                 if (self->io.direction == IO_XMIT)
2183                 {
2184                         if (self->io.speed > 115200) /* FIR, MIR */
2185                         {
2186                                 newMask = self->ier;
2187                         }
2188                         else /* SIR */
2189                         {
2190                                 newMask = UART_IER_THRI | UART_IER_RDI;
2191                         }
2192                 }
2193                 else {
2194                         if (self->io.speed > 115200) /* FIR, MIR */
2195                         {
2196                                 newMask = self->ier;
2197                         }
2198                         else /* SIR */
2199                         {
2200                                 newMask = UART_IER_RDI;
2201                         }
2202                 }
2203         }
2204         else /* Disable all the interrupts */
2205         {
2206                 newMask = 0x00;
2207
2208         }
2209
2210         //SIR and FIR has different registers
2211         if (self->io.speed > 115200)
2212         {
2213                 switch_bank(iobase, BANK0);
2214                 outb(newMask, iobase+FIR_IER);
2215         }
2216         else
2217                 outb(newMask, iobase+UART_IER);
2218
2219         IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ );
2220 }
2221
2222 static void SIR2FIR(int iobase)
2223 {
2224         //unsigned char tmp;
2225
2226         IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
2227
2228         /* Already protected (change_speed() or setup()), no need to lock.
2229          * Jean II */
2230
2231         outb(0x28, iobase+UART_MCR);
2232         outb(0x68, iobase+UART_MCR);
2233         outb(0x88, iobase+UART_MCR);
2234
2235         outb(0x60, iobase+FIR_MCR);     /*  Master Reset */
2236         outb(0x20, iobase+FIR_MCR);     /*  Master Interrupt Enable */
2237
2238         //tmp = inb(iobase+FIR_LCR_B);  /* SIP enable */
2239         //tmp |= 0x20;
2240         //outb(tmp, iobase+FIR_LCR_B);
2241
2242         IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ );
2243 }
2244
2245 static void FIR2SIR(int iobase)
2246 {
2247         unsigned char val;
2248
2249         IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
2250
2251         /* Already protected (change_speed() or setup()), no need to lock.
2252          * Jean II */
2253
2254         outb(0x20, iobase+FIR_MCR);     /* IRQ to low */
2255         outb(0x00, iobase+UART_IER);
2256
2257         outb(0xA0, iobase+FIR_MCR);     /* Don't set master reset */
2258         outb(0x00, iobase+UART_FCR);
2259         outb(0x07, iobase+UART_FCR);
2260
2261         val = inb(iobase+UART_RX);
2262         val = inb(iobase+UART_LSR);
2263         val = inb(iobase+UART_MSR);
2264
2265         IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ );
2266 }
2267
2268 MODULE_AUTHOR("Benjamin Kong <benjamin_kong@ali.com.tw>");
2269 MODULE_DESCRIPTION("ALi FIR Controller Driver");
2270 MODULE_LICENSE("GPL");
2271
2272
2273 module_param_array(io, int, NULL, 0);
2274 MODULE_PARM_DESC(io, "Base I/O addresses");
2275 module_param_array(irq, int, NULL, 0);
2276 MODULE_PARM_DESC(irq, "IRQ lines");
2277 module_param_array(dma, int, NULL, 0);
2278 MODULE_PARM_DESC(dma, "DMA channels");
2279
2280 module_init(ali_ircc_init);
2281 module_exit(ali_ircc_cleanup);