drivers/net/ethernet/intel/e1000e/netdev.c

   1 /*******************************************************************************
   2
   3   Intel PRO/1000 Linux driver
   4   Copyright(c) 1999 - 2011 Intel Corporation.
   5
   6   This program is free software; you can redistribute it and/or modify it
   7   under the terms and conditions of the GNU General Public License,
   8   version 2, as published by the Free Software Foundation.
   9
  10   This program is distributed in the hope it will be useful, but WITHOUT
  11   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  12   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  13   more details.
  14
  15   You should have received a copy of the GNU General Public License along with
  16   this program; if not, write to the Free Software Foundation, Inc.,
  17   51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
  18
  19   The full GNU General Public License is included in this distribution in
  20   the file called "COPYING".
  21
  22   Contact Information:
  23   Linux NICS <linux.nics@intel.com>
  24   e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
  25   Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
  26
  27 *******************************************************************************/
  28
  29 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  30
  31 #include <linux/module.h>
  32 #include <linux/types.h>
  33 #include <linux/init.h>
  34 #include <linux/pci.h>
  35 #include <linux/vmalloc.h>
  36 #include <linux/pagemap.h>
  37 #include <linux/delay.h>
  38 #include <linux/netdevice.h>
  39 #include <linux/interrupt.h>
  40 #include <linux/tcp.h>
  41 #include <linux/ipv6.h>
  42 #include <linux/slab.h>
  43 #include <net/checksum.h>
  44 #include <net/ip6_checksum.h>
  45 #include <linux/mii.h>
  46 #include <linux/ethtool.h>
  47 #include <linux/if_vlan.h>
  48 #include <linux/cpu.h>
  49 #include <linux/smp.h>
  50 #include <linux/pm_qos_params.h>
  51 #include <linux/pm_runtime.h>
  52 #include <linux/aer.h>
  53 #include <linux/prefetch.h>
  54
  55 #include "e1000.h"
  56
  57 #define DRV_EXTRAVERSION "-k"
  58
  59 #define DRV_VERSION "1.5.1" DRV_EXTRAVERSION
  60 char e1000e_driver_name[] = "e1000e";
  61 const char e1000e_driver_version[] = DRV_VERSION;
  62
  63 static void e1000e_disable_aspm(struct pci_dev *pdev, u16 state);
  64
  65 static const struct e1000_info *e1000_info_tbl[] = {
  66         [board_82571]           = &e1000_82571_info,
  67         [board_82572]           = &e1000_82572_info,
  68         [board_82573]           = &e1000_82573_info,
  69         [board_82574]           = &e1000_82574_info,
  70         [board_82583]           = &e1000_82583_info,
  71         [board_80003es2lan]     = &e1000_es2_info,
  72         [board_ich8lan]         = &e1000_ich8_info,
  73         [board_ich9lan]         = &e1000_ich9_info,
  74         [board_ich10lan]        = &e1000_ich10_info,
  75         [board_pchlan]          = &e1000_pch_info,
  76         [board_pch2lan]         = &e1000_pch2_info,
  77 };
  78
  79 struct e1000_reg_info {
  80         u32 ofs;
  81         char *name;
  82 };
  83
  84 #define E1000_RDFH      0x02410 /* Rx Data FIFO Head - RW */
  85 #define E1000_RDFT      0x02418 /* Rx Data FIFO Tail - RW */
  86 #define E1000_RDFHS     0x02420 /* Rx Data FIFO Head Saved - RW */
  87 #define E1000_RDFTS     0x02428 /* Rx Data FIFO Tail Saved - RW */
  88 #define E1000_RDFPC     0x02430 /* Rx Data FIFO Packet Count - RW */
  89
  90 #define E1000_TDFH      0x03410 /* Tx Data FIFO Head - RW */
  91 #define E1000_TDFT      0x03418 /* Tx Data FIFO Tail - RW */
  92 #define E1000_TDFHS     0x03420 /* Tx Data FIFO Head Saved - RW */
  93 #define E1000_TDFTS     0x03428 /* Tx Data FIFO Tail Saved - RW */
  94 #define E1000_TDFPC     0x03430 /* Tx Data FIFO Packet Count - RW */
  95
  96 static const struct e1000_reg_info e1000_reg_info_tbl[] = {
  97
  98         /* General Registers */
  99         {E1000_CTRL, "CTRL"},
 100         {E1000_STATUS, "STATUS"},
 101         {E1000_CTRL_EXT, "CTRL_EXT"},
 102
 103         /* Interrupt Registers */
 104         {E1000_ICR, "ICR"},
 105
 106         /* Rx Registers */
 107         {E1000_RCTL, "RCTL"},
 108         {E1000_RDLEN, "RDLEN"},
 109         {E1000_RDH, "RDH"},
 110         {E1000_RDT, "RDT"},
 111         {E1000_RDTR, "RDTR"},
 112         {E1000_RXDCTL(0), "RXDCTL"},
 113         {E1000_ERT, "ERT"},
 114         {E1000_RDBAL, "RDBAL"},
 115         {E1000_RDBAH, "RDBAH"},
 116         {E1000_RDFH, "RDFH"},
 117         {E1000_RDFT, "RDFT"},
 118         {E1000_RDFHS, "RDFHS"},
 119         {E1000_RDFTS, "RDFTS"},
 120         {E1000_RDFPC, "RDFPC"},
 121
 122         /* Tx Registers */
 123         {E1000_TCTL, "TCTL"},
 124         {E1000_TDBAL, "TDBAL"},
 125         {E1000_TDBAH, "TDBAH"},
 126         {E1000_TDLEN, "TDLEN"},
 127         {E1000_TDH, "TDH"},
 128         {E1000_TDT, "TDT"},
 129         {E1000_TIDV, "TIDV"},
 130         {E1000_TXDCTL(0), "TXDCTL"},
 131         {E1000_TADV, "TADV"},
 132         {E1000_TARC(0), "TARC"},
 133         {E1000_TDFH, "TDFH"},
 134         {E1000_TDFT, "TDFT"},
 135         {E1000_TDFHS, "TDFHS"},
 136         {E1000_TDFTS, "TDFTS"},
 137         {E1000_TDFPC, "TDFPC"},
 138
 139         /* List Terminator */
 140         {}
 141 };
 142
 143 /*
 144  * e1000_regdump - register printout routine
 145  */
 146 static void e1000_regdump(struct e1000_hw *hw, struct e1000_reg_info *reginfo)
 147 {
 148         int n = 0;
 149         char rname[16];
 150         u32 regs[8];
 151
 152         switch (reginfo->ofs) {
 153         case E1000_RXDCTL(0):
 154                 for (n = 0; n < 2; n++)
 155                         regs[n] = __er32(hw, E1000_RXDCTL(n));
 156                 break;
 157         case E1000_TXDCTL(0):
 158                 for (n = 0; n < 2; n++)
 159                         regs[n] = __er32(hw, E1000_TXDCTL(n));
 160                 break;
 161         case E1000_TARC(0):
 162                 for (n = 0; n < 2; n++)
 163                         regs[n] = __er32(hw, E1000_TARC(n));
 164                 break;
 165         default:
 166                 printk(KERN_INFO "%-15s %08x\n",
 167                        reginfo->name, __er32(hw, reginfo->ofs));
 168                 return;
 169         }
 170
 171         snprintf(rname, 16, "%s%s", reginfo->name, "[0-1]");
 172         printk(KERN_INFO "%-15s ", rname);
 173         for (n = 0; n < 2; n++)
 174                 printk(KERN_CONT "%08x ", regs[n]);
 175         printk(KERN_CONT "\n");
 176 }
 177
 178 /*
 179  * e1000e_dump - Print registers, Tx-ring and Rx-ring
 180  */
 181 static void e1000e_dump(struct e1000_adapter *adapter)
 182 {
 183         struct net_device *netdev = adapter->netdev;
 184         struct e1000_hw *hw = &adapter->hw;
 185         struct e1000_reg_info *reginfo;
 186         struct e1000_ring *tx_ring = adapter->tx_ring;
 187         struct e1000_tx_desc *tx_desc;
 188         struct my_u0 {
 189                 u64 a;
 190                 u64 b;
 191         } *u0;
 192         struct e1000_buffer *buffer_info;
 193         struct e1000_ring *rx_ring = adapter->rx_ring;
 194         union e1000_rx_desc_packet_split *rx_desc_ps;
 195         union e1000_rx_desc_extended *rx_desc;
 196         struct my_u1 {
 197                 u64 a;
 198                 u64 b;
 199                 u64 c;
 200                 u64 d;
 201         } *u1;
 202         u32 staterr;
 203         int i = 0;
 204
 205         if (!netif_msg_hw(adapter))
 206                 return;
 207
 208         /* Print netdevice Info */
 209         if (netdev) {
 210                 dev_info(&adapter->pdev->dev, "Net device Info\n");
 211                 printk(KERN_INFO "Device Name     state            "
 212                        "trans_start      last_rx\n");
 213                 printk(KERN_INFO "%-15s %016lX %016lX %016lX\n",
 214                        netdev->name, netdev->state, netdev->trans_start,
 215                        netdev->last_rx);
 216         }
 217
 218         /* Print Registers */
 219         dev_info(&adapter->pdev->dev, "Register Dump\n");
 220         printk(KERN_INFO " Register Name   Value\n");
 221         for (reginfo = (struct e1000_reg_info *)e1000_reg_info_tbl;
 222              reginfo->name; reginfo++) {
 223                 e1000_regdump(hw, reginfo);
 224         }
 225
 226         /* Print Tx Ring Summary */
 227         if (!netdev || !netif_running(netdev))
 228                 goto exit;
 229
 230         dev_info(&adapter->pdev->dev, "Tx Ring Summary\n");
 231         printk(KERN_INFO "Queue [NTU] [NTC] [bi(ntc)->dma  ]"
 232                " leng ntw timestamp\n");
 233         buffer_info = &tx_ring->buffer_info[tx_ring->next_to_clean];
 234         printk(KERN_INFO " %5d %5X %5X %016llX %04X %3X %016llX\n",
 235                0, tx_ring->next_to_use, tx_ring->next_to_clean,
 236                (unsigned long long)buffer_info->dma,
 237                buffer_info->length,
 238                buffer_info->next_to_watch,
 239                (unsigned long long)buffer_info->time_stamp);
 240
 241         /* Print Tx Ring */
 242         if (!netif_msg_tx_done(adapter))
 243                 goto rx_ring_summary;
 244
 245         dev_info(&adapter->pdev->dev, "Tx Ring Dump\n");
 246
 247         /* Transmit Descriptor Formats - DEXT[29] is 0 (Legacy) or 1 (Extended)
 248          *
 249          * Legacy Transmit Descriptor
 250          *   +--------------------------------------------------------------+
 251          * 0 |         Buffer Address [63:0] (Reserved on Write Back)       |
 252          *   +--------------------------------------------------------------+
 253          * 8 | Special  |    CSS     | Status |  CMD    |  CSO   |  Length  |
 254          *   +--------------------------------------------------------------+
 255          *   63       48 47        36 35    32 31     24 23    16 15        0
 256          *
 257          * Extended Context Descriptor (DTYP=0x0) for TSO or checksum offload
 258          *   63      48 47    40 39       32 31             16 15    8 7      0
 259          *   +----------------------------------------------------------------+
 260          * 0 |  TUCSE  | TUCS0  |   TUCSS   |     IPCSE       | IPCS0 | IPCSS |
 261          *   +----------------------------------------------------------------+
 262          * 8 |   MSS   | HDRLEN | RSV | STA | TUCMD | DTYP |      PAYLEN      |
 263          *   +----------------------------------------------------------------+
 264          *   63      48 47    40 39 36 35 32 31   24 23  20 19                0
 265          *
 266          * Extended Data Descriptor (DTYP=0x1)
 267          *   +----------------------------------------------------------------+
 268          * 0 |                     Buffer Address [63:0]                      |
 269          *   +----------------------------------------------------------------+
 270          * 8 | VLAN tag |  POPTS  | Rsvd | Status | Command | DTYP |  DTALEN  |
 271          *   +----------------------------------------------------------------+
 272          *   63       48 47     40 39  36 35    32 31     24 23  20 19        0
 273          */
 274         printk(KERN_INFO "Tl[desc]     [address 63:0  ] [SpeCssSCmCsLen]"
 275                " [bi->dma       ] leng  ntw timestamp        bi->skb "
 276                "<-- Legacy format\n");
 277         printk(KERN_INFO "Tc[desc]     [Ce CoCsIpceCoS] [MssHlRSCm0Plen]"
 278                " [bi->dma       ] leng  ntw timestamp        bi->skb "
 279                "<-- Ext Context format\n");
 280         printk(KERN_INFO "Td[desc]     [address 63:0  ] [VlaPoRSCm1Dlen]"
 281                " [bi->dma       ] leng  ntw timestamp        bi->skb "
 282                "<-- Ext Data format\n");
 283         for (i = 0; tx_ring->desc && (i < tx_ring->count); i++) {
 284                 tx_desc = E1000_TX_DESC(*tx_ring, i);
 285                 buffer_info = &tx_ring->buffer_info[i];
 286                 u0 = (struct my_u0 *)tx_desc;
 287                 printk(KERN_INFO "T%c[0x%03X]    %016llX %016llX %016llX "
 288                        "%04X  %3X %016llX %p",
 289                        (!(le64_to_cpu(u0->b) & (1 << 29)) ? 'l' :
 290                         ((le64_to_cpu(u0->b) & (1 << 20)) ? 'd' : 'c')), i,
 291                        (unsigned long long)le64_to_cpu(u0->a),
 292                        (unsigned long long)le64_to_cpu(u0->b),
 293                        (unsigned long long)buffer_info->dma,
 294                        buffer_info->length, buffer_info->next_to_watch,
 295                        (unsigned long long)buffer_info->time_stamp,
 296                        buffer_info->skb);
 297                 if (i == tx_ring->next_to_use && i == tx_ring->next_to_clean)
 298                         printk(KERN_CONT " NTC/U\n");
 299                 else if (i == tx_ring->next_to_use)
 300                         printk(KERN_CONT " NTU\n");
 301                 else if (i == tx_ring->next_to_clean)
 302                         printk(KERN_CONT " NTC\n");
 303                 else
 304                         printk(KERN_CONT "\n");
 305
 306                 if (netif_msg_pktdata(adapter) && buffer_info->dma != 0)
 307                         print_hex_dump(KERN_INFO, "", DUMP_PREFIX_ADDRESS,
 308                                        16, 1, phys_to_virt(buffer_info->dma),
 309                                        buffer_info->length, true);
 310         }
 311
 312         /* Print Rx Ring Summary */
 313 rx_ring_summary:
 314         dev_info(&adapter->pdev->dev, "Rx Ring Summary\n");
 315         printk(KERN_INFO "Queue [NTU] [NTC]\n");
 316         printk(KERN_INFO " %5d %5X %5X\n", 0,
 317                rx_ring->next_to_use, rx_ring->next_to_clean);
 318
 319         /* Print Rx Ring */
 320         if (!netif_msg_rx_status(adapter))
 321                 goto exit;
 322
 323         dev_info(&adapter->pdev->dev, "Rx Ring Dump\n");
 324         switch (adapter->rx_ps_pages) {
 325         case 1:
 326         case 2:
 327         case 3:
 328                 /* [Extended] Packet Split Receive Descriptor Format
 329                  *
 330                  *    +-----------------------------------------------------+
 331                  *  0 |                Buffer Address 0 [63:0]              |
 332                  *    +-----------------------------------------------------+
 333                  *  8 |                Buffer Address 1 [63:0]              |
 334                  *    +-----------------------------------------------------+
 335                  * 16 |                Buffer Address 2 [63:0]              |
 336                  *    +-----------------------------------------------------+
 337                  * 24 |                Buffer Address 3 [63:0]              |
 338                  *    +-----------------------------------------------------+
 339                  */
 340                 printk(KERN_INFO "R  [desc]      [buffer 0 63:0 ] "
 341                        "[buffer 1 63:0 ] "
 342                        "[buffer 2 63:0 ] [buffer 3 63:0 ] [bi->dma       ] "
 343                        "[bi->skb] <-- Ext Pkt Split format\n");
 344                 /* [Extended] Receive Descriptor (Write-Back) Format
 345                  *
 346                  *   63       48 47    32 31     13 12    8 7    4 3        0
 347                  *   +------------------------------------------------------+
 348                  * 0 | Packet   | IP     |  Rsvd   | MRQ   | Rsvd | MRQ RSS |
 349                  *   | Checksum | Ident  |         | Queue |      |  Type   |
 350                  *   +------------------------------------------------------+
 351                  * 8 | VLAN Tag | Length | Extended Error | Extended Status |
 352                  *   +------------------------------------------------------+
 353                  *   63       48 47    32 31            20 19               0
 354                  */
 355                 printk(KERN_INFO "RWB[desc]      [ck ipid mrqhsh] "
 356                        "[vl   l0 ee  es] "
 357                        "[ l3  l2  l1 hs] [reserved      ] ---------------- "
 358                        "[bi->skb] <-- Ext Rx Write-Back format\n");
 359                 for (i = 0; i < rx_ring->count; i++) {
 360                         buffer_info = &rx_ring->buffer_info[i];
 361                         rx_desc_ps = E1000_RX_DESC_PS(*rx_ring, i);
 362                         u1 = (struct my_u1 *)rx_desc_ps;
 363                         staterr =
 364                             le32_to_cpu(rx_desc_ps->wb.middle.status_error);
 365                         if (staterr & E1000_RXD_STAT_DD) {
 366                                 /* Descriptor Done */
 367                                 printk(KERN_INFO "RWB[0x%03X]     %016llX "
 368                                        "%016llX %016llX %016llX "
 369                                        "---------------- %p", i,
 370                                        (unsigned long long)le64_to_cpu(u1->a),
 371                                        (unsigned long long)le64_to_cpu(u1->b),
 372                                        (unsigned long long)le64_to_cpu(u1->c),
 373                                        (unsigned long long)le64_to_cpu(u1->d),
 374                                        buffer_info->skb);
 375                         } else {
 376                                 printk(KERN_INFO "R  [0x%03X]     %016llX "
 377                                        "%016llX %016llX %016llX %016llX %p", i,
 378                                        (unsigned long long)le64_to_cpu(u1->a),
 379                                        (unsigned long long)le64_to_cpu(u1->b),
 380                                        (unsigned long long)le64_to_cpu(u1->c),
 381                                        (unsigned long long)le64_to_cpu(u1->d),
 382                                        (unsigned long long)buffer_info->dma,
 383                                        buffer_info->skb);
 384
 385                                 if (netif_msg_pktdata(adapter))
 386                                         print_hex_dump(KERN_INFO, "",
 387                                                 DUMP_PREFIX_ADDRESS, 16, 1,
 388                                                 phys_to_virt(buffer_info->dma),
 389                                                 adapter->rx_ps_bsize0, true);
 390                         }
 391
 392                         if (i == rx_ring->next_to_use)
 393                                 printk(KERN_CONT " NTU\n");
 394                         else if (i == rx_ring->next_to_clean)
 395                                 printk(KERN_CONT " NTC\n");
 396                         else
 397                                 printk(KERN_CONT "\n");
 398                 }
 399                 break;
 400         default:
 401         case 0:
 402                 /* Extended Receive Descriptor (Read) Format
 403                  *
 404                  *   +-----------------------------------------------------+
 405                  * 0 |                Buffer Address [63:0]                |
 406                  *   +-----------------------------------------------------+
 407                  * 8 |                      Reserved                       |
 408                  *   +-----------------------------------------------------+
 409                  */
 410                 printk(KERN_INFO "R  [desc]      [buf addr 63:0 ] "
 411                        "[reserved 63:0 ] [bi->dma       ] "
 412                        "[bi->skb] <-- Ext (Read) format\n");
 413                 /* Extended Receive Descriptor (Write-Back) Format
 414                  *
 415                  *   63       48 47    32 31    24 23            4 3        0
 416                  *   +------------------------------------------------------+
 417                  *   |     RSS Hash      |        |               |         |
 418                  * 0 +-------------------+  Rsvd  |   Reserved    | MRQ RSS |
 419                  *   | Packet   | IP     |        |               |  Type   |
 420                  *   | Checksum | Ident  |        |               |         |
 421                  *   +------------------------------------------------------+
 422                  * 8 | VLAN Tag | Length | Extended Error | Extended Status |
 423                  *   +------------------------------------------------------+
 424                  *   63       48 47    32 31            20 19               0
 425                  */
 426                 printk(KERN_INFO "RWB[desc]      [cs ipid    mrq] "
 427                        "[vt   ln xe  xs] "
 428                        "[bi->skb] <-- Ext (Write-Back) format\n");
 429
 430                 for (i = 0; i < rx_ring->count; i++) {
 431                         buffer_info = &rx_ring->buffer_info[i];
 432                         rx_desc = E1000_RX_DESC_EXT(*rx_ring, i);
 433                         u1 = (struct my_u1 *)rx_desc;
 434                         staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
 435                         if (staterr & E1000_RXD_STAT_DD) {
 436                                 /* Descriptor Done */
 437                                 printk(KERN_INFO "RWB[0x%03X]     %016llX "
 438                                        "%016llX ---------------- %p", i,
 439                                        (unsigned long long)le64_to_cpu(u1->a),
 440                                        (unsigned long long)le64_to_cpu(u1->b),
 441                                        buffer_info->skb);
 442                         } else {
 443                                 printk(KERN_INFO "R  [0x%03X]     %016llX "
 444                                        "%016llX %016llX %p", i,
 445                                        (unsigned long long)le64_to_cpu(u1->a),
 446                                        (unsigned long long)le64_to_cpu(u1->b),
 447                                        (unsigned long long)buffer_info->dma,
 448                                        buffer_info->skb);
 449
 450                                 if (netif_msg_pktdata(adapter))
 451                                         print_hex_dump(KERN_INFO, "",
 452                                                        DUMP_PREFIX_ADDRESS, 16,
 453                                                        1,
 454                                                        phys_to_virt
 455                                                        (buffer_info->dma),
 456                                                        adapter->rx_buffer_len,
 457                                                        true);
 458                         }
 459
 460                         if (i == rx_ring->next_to_use)
 461                                 printk(KERN_CONT " NTU\n");
 462                         else if (i == rx_ring->next_to_clean)
 463                                 printk(KERN_CONT " NTC\n");
 464                         else
 465                                 printk(KERN_CONT "\n");
 466                 }
 467         }
 468
 469 exit:
 470         return;
 471 }
 472
 473 /**
 474  * e1000_desc_unused - calculate if we have unused descriptors
 475  **/
 476 static int e1000_desc_unused(struct e1000_ring *ring)
 477 {
 478         if (ring->next_to_clean > ring->next_to_use)
 479                 return ring->next_to_clean - ring->next_to_use - 1;
 480
 481         return ring->count + ring->next_to_clean - ring->next_to_use - 1;
 482 }
 483
 484 /**
 485  * e1000_receive_skb - helper function to handle Rx indications
 486  * @adapter: board private structure
 487  * @status: descriptor status field as written by hardware
 488  * @vlan: descriptor vlan field as written by hardware (no le/be conversion)
 489  * @skb: pointer to sk_buff to be indicated to stack
 490  **/
 491 static void e1000_receive_skb(struct e1000_adapter *adapter,
 492                               struct net_device *netdev, struct sk_buff *skb,
 493                               u8 status, __le16 vlan)
 494 {
 495         u16 tag = le16_to_cpu(vlan);
 496         skb->protocol = eth_type_trans(skb, netdev);
 497
 498         if (status & E1000_RXD_STAT_VP)
 499                 __vlan_hwaccel_put_tag(skb, tag);
 500
 501         napi_gro_receive(&adapter->napi, skb);
 502 }
 503
 504 /**
 505  * e1000_rx_checksum - Receive Checksum Offload
 506  * @adapter:     board private structure
 507  * @status_err:  receive descriptor status and error fields
 508  * @csum:       receive descriptor csum field
 509  * @sk_buff:     socket buffer with received data
 510  **/
 511 static void e1000_rx_checksum(struct e1000_adapter *adapter, u32 status_err,
 512                               u32 csum, struct sk_buff *skb)
 513 {
 514         u16 status = (u16)status_err;
 515         u8 errors = (u8)(status_err >> 24);
 516
 517         skb_checksum_none_assert(skb);
 518
 519         /* Ignore Checksum bit is set */
 520         if (status & E1000_RXD_STAT_IXSM)
 521                 return;
 522         /* TCP/UDP checksum error bit is set */
 523         if (errors & E1000_RXD_ERR_TCPE) {
 524                 /* let the stack verify checksum errors */
 525                 adapter->hw_csum_err++;
 526                 return;
 527         }
 528
 529         /* TCP/UDP Checksum has not been calculated */
 530         if (!(status & (E1000_RXD_STAT_TCPCS | E1000_RXD_STAT_UDPCS)))
 531                 return;
 532
 533         /* It must be a TCP or UDP packet with a valid checksum */
 534         if (status & E1000_RXD_STAT_TCPCS) {
 535                 /* TCP checksum is good */
 536                 skb->ip_summed = CHECKSUM_UNNECESSARY;
 537         } else {
 538                 /*
 539                  * IP fragment with UDP payload
 540                  * Hardware complements the payload checksum, so we undo it
 541                  * and then put the value in host order for further stack use.
 542                  */
 543                 __sum16 sum = (__force __sum16)htons(csum);
 544                 skb->csum = csum_unfold(~sum);
 545                 skb->ip_summed = CHECKSUM_COMPLETE;
 546         }
 547         adapter->hw_csum_good++;
 548 }
 549
 550 /**
 551  * e1000e_update_tail_wa - helper function for e1000e_update_[rt]dt_wa()
 552  * @hw: pointer to the HW structure
 553  * @tail: address of tail descriptor register
 554  * @i: value to write to tail descriptor register
 555  *
 556  * When updating the tail register, the ME could be accessing Host CSR
 557  * registers at the same time.  Normally, this is handled in h/w by an
 558  * arbiter but on some parts there is a bug that acknowledges Host accesses
 559  * later than it should which could result in the descriptor register to
 560  * have an incorrect value.  Workaround this by checking the FWSM register
 561  * which has bit 24 set while ME is accessing Host CSR registers, wait
 562  * if it is set and try again a number of times.
 563  **/
 564 static inline s32 e1000e_update_tail_wa(struct e1000_hw *hw, u8 __iomem * tail,
 565                                         unsigned int i)
 566 {
 567         unsigned int j = 0;
 568
 569         while ((j++ < E1000_ICH_FWSM_PCIM2PCI_COUNT) &&
 570                (er32(FWSM) & E1000_ICH_FWSM_PCIM2PCI))
 571                 udelay(50);
 572
 573         writel(i, tail);
 574
 575         if ((j == E1000_ICH_FWSM_PCIM2PCI_COUNT) && (i != readl(tail)))
 576                 return E1000_ERR_SWFW_SYNC;
 577
 578         return 0;
 579 }
 580
 581 static void e1000e_update_rdt_wa(struct e1000_adapter *adapter, unsigned int i)
 582 {
 583         u8 __iomem *tail = (adapter->hw.hw_addr + adapter->rx_ring->tail);
 584         struct e1000_hw *hw = &adapter->hw;
 585
 586         if (e1000e_update_tail_wa(hw, tail, i)) {
 587                 u32 rctl = er32(RCTL);
 588                 ew32(RCTL, rctl & ~E1000_RCTL_EN);
 589                 e_err("ME firmware caused invalid RDT - resetting\n");
 590                 schedule_work(&adapter->reset_task);
 591         }
 592 }
 593
 594 static void e1000e_update_tdt_wa(struct e1000_adapter *adapter, unsigned int i)
 595 {
 596         u8 __iomem *tail = (adapter->hw.hw_addr + adapter->tx_ring->tail);
 597         struct e1000_hw *hw = &adapter->hw;
 598
 599         if (e1000e_update_tail_wa(hw, tail, i)) {
 600                 u32 tctl = er32(TCTL);
 601                 ew32(TCTL, tctl & ~E1000_TCTL_EN);
 602                 e_err("ME firmware caused invalid TDT - resetting\n");
 603                 schedule_work(&adapter->reset_task);
 604         }
 605 }
 606
 607 /**
 608  * e1000_alloc_rx_buffers - Replace used receive buffers
 609  * @adapter: address of board private structure
 610  **/
 611 static void e1000_alloc_rx_buffers(struct e1000_adapter *adapter,
 612                                    int cleaned_count, gfp_t gfp)
 613 {
 614         struct net_device *netdev = adapter->netdev;
 615         struct pci_dev *pdev = adapter->pdev;
 616         struct e1000_ring *rx_ring = adapter->rx_ring;
 617         union e1000_rx_desc_extended *rx_desc;
 618         struct e1000_buffer *buffer_info;
 619         struct sk_buff *skb;
 620         unsigned int i;
 621         unsigned int bufsz = adapter->rx_buffer_len;
 622
 623         i = rx_ring->next_to_use;
 624         buffer_info = &rx_ring->buffer_info[i];
 625
 626         while (cleaned_count--) {
 627                 skb = buffer_info->skb;
 628                 if (skb) {
 629                         skb_trim(skb, 0);
 630                         goto map_skb;
 631                 }
 632
 633                 skb = __netdev_alloc_skb_ip_align(netdev, bufsz, gfp);
 634                 if (!skb) {
 635                         /* Better luck next round */
 636                         adapter->alloc_rx_buff_failed++;
 637                         break;
 638                 }
 639
 640                 buffer_info->skb = skb;
 641 map_skb:
 642                 buffer_info->dma = dma_map_single(&pdev->dev, skb->data,
 643                                                   adapter->rx_buffer_len,
 644                                                   DMA_FROM_DEVICE);
 645                 if (dma_mapping_error(&pdev->dev, buffer_info->dma)) {
 646                         dev_err(&pdev->dev, "Rx DMA map failed\n");
 647                         adapter->rx_dma_failed++;
 648                         break;
 649                 }
 650
 651                 rx_desc = E1000_RX_DESC_EXT(*rx_ring, i);
 652                 rx_desc->read.buffer_addr = cpu_to_le64(buffer_info->dma);
 653
 654                 if (unlikely(!(i & (E1000_RX_BUFFER_WRITE - 1)))) {
 655                         /*
 656                          * Force memory writes to complete before letting h/w
 657                          * know there are new descriptors to fetch.  (Only
 658                          * applicable for weak-ordered memory model archs,
 659                          * such as IA-64).
 660                          */
 661                         wmb();
 662                         if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
 663                                 e1000e_update_rdt_wa(adapter, i);
 664                         else
 665                                 writel(i, adapter->hw.hw_addr + rx_ring->tail);
 666                 }
 667                 i++;
 668                 if (i == rx_ring->count)
 669                         i = 0;
 670                 buffer_info = &rx_ring->buffer_info[i];
 671         }
 672
 673         rx_ring->next_to_use = i;
 674 }
 675
 676 /**
 677  * e1000_alloc_rx_buffers_ps - Replace used receive buffers; packet split
 678  * @adapter: address of board private structure
 679  **/
 680 static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter,
 681                                       int cleaned_count, gfp_t gfp)
 682 {
 683         struct net_device *netdev = adapter->netdev;
 684         struct pci_dev *pdev = adapter->pdev;
 685         union e1000_rx_desc_packet_split *rx_desc;
 686         struct e1000_ring *rx_ring = adapter->rx_ring;
 687         struct e1000_buffer *buffer_info;
 688         struct e1000_ps_page *ps_page;
 689         struct sk_buff *skb;
 690         unsigned int i, j;
 691
 692         i = rx_ring->next_to_use;
 693         buffer_info = &rx_ring->buffer_info[i];
 694
 695         while (cleaned_count--) {
 696                 rx_desc = E1000_RX_DESC_PS(*rx_ring, i);
 697
 698                 for (j = 0; j < PS_PAGE_BUFFERS; j++) {
 699                         ps_page = &buffer_info->ps_pages[j];
 700                         if (j >= adapter->rx_ps_pages) {
 701                                 /* all unused desc entries get hw null ptr */
 702                                 rx_desc->read.buffer_addr[j + 1] =
 703                                     ~cpu_to_le64(0);
 704                                 continue;
 705                         }
 706                         if (!ps_page->page) {
 707                                 ps_page->page = alloc_page(gfp);
 708                                 if (!ps_page->page) {
 709                                         adapter->alloc_rx_buff_failed++;
 710                                         goto no_buffers;
 711                                 }
 712                                 ps_page->dma = dma_map_page(&pdev->dev,
 713                                                             ps_page->page,
 714                                                             0, PAGE_SIZE,
 715                                                             DMA_FROM_DEVICE);
 716                                 if (dma_mapping_error(&pdev->dev,
 717                                                       ps_page->dma)) {
 718                                         dev_err(&adapter->pdev->dev,
 719                                                 "Rx DMA page map failed\n");
 720                                         adapter->rx_dma_failed++;
 721                                         goto no_buffers;
 722                                 }
 723                         }
 724                         /*
 725                          * Refresh the desc even if buffer_addrs
 726                          * didn't change because each write-back
 727                          * erases this info.
 728                          */
 729                         rx_desc->read.buffer_addr[j + 1] =
 730                             cpu_to_le64(ps_page->dma);
 731                 }
 732
 733                 skb = __netdev_alloc_skb_ip_align(netdev,
 734                                                   adapter->rx_ps_bsize0,
 735                                                   gfp);
 736
 737                 if (!skb) {
 738                         adapter->alloc_rx_buff_failed++;
 739                         break;
 740                 }
 741
 742                 buffer_info->skb = skb;
 743                 buffer_info->dma = dma_map_single(&pdev->dev, skb->data,
 744                                                   adapter->rx_ps_bsize0,
 745                                                   DMA_FROM_DEVICE);
 746                 if (dma_mapping_error(&pdev->dev, buffer_info->dma)) {
 747                         dev_err(&pdev->dev, "Rx DMA map failed\n");
 748                         adapter->rx_dma_failed++;
 749                         /* cleanup skb */
 750                         dev_kfree_skb_any(skb);
 751                         buffer_info->skb = NULL;
 752                         break;
 753                 }
 754
 755                 rx_desc->read.buffer_addr[0] = cpu_to_le64(buffer_info->dma);
 756
 757                 if (unlikely(!(i & (E1000_RX_BUFFER_WRITE - 1)))) {
 758                         /*
 759                          * Force memory writes to complete before letting h/w
 760                          * know there are new descriptors to fetch.  (Only
 761                          * applicable for weak-ordered memory model archs,
 762                          * such as IA-64).
 763                          */
 764                         wmb();
 765                         if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
 766                                 e1000e_update_rdt_wa(adapter, i << 1);
 767                         else
 768                                 writel(i << 1,
 769                                        adapter->hw.hw_addr + rx_ring->tail);
 770                 }
 771
 772                 i++;
 773                 if (i == rx_ring->count)
 774                         i = 0;
 775                 buffer_info = &rx_ring->buffer_info[i];
 776         }
 777
 778 no_buffers:
 779         rx_ring->next_to_use = i;
 780 }
 781
 782 /**
 783  * e1000_alloc_jumbo_rx_buffers - Replace used jumbo receive buffers
 784  * @adapter: address of board private structure
 785  * @cleaned_count: number of buffers to allocate this pass
 786  **/
 787
 788 static void e1000_alloc_jumbo_rx_buffers(struct e1000_adapter *adapter,
 789                                          int cleaned_count, gfp_t gfp)
 790 {
 791         struct net_device *netdev = adapter->netdev;
 792         struct pci_dev *pdev = adapter->pdev;
 793         union e1000_rx_desc_extended *rx_desc;
 794         struct e1000_ring *rx_ring = adapter->rx_ring;
 795         struct e1000_buffer *buffer_info;
 796         struct sk_buff *skb;
 797         unsigned int i;
 798         unsigned int bufsz = 256 - 16 /* for skb_reserve */;
 799
 800         i = rx_ring->next_to_use;
 801         buffer_info = &rx_ring->buffer_info[i];
 802
 803         while (cleaned_count--) {
 804                 skb = buffer_info->skb;
 805                 if (skb) {
 806                         skb_trim(skb, 0);
 807                         goto check_page;
 808                 }
 809
 810                 skb = __netdev_alloc_skb_ip_align(netdev, bufsz, gfp);
 811                 if (unlikely(!skb)) {
 812                         /* Better luck next round */
 813                         adapter->alloc_rx_buff_failed++;
 814                         break;
 815                 }
 816
 817                 buffer_info->skb = skb;
 818 check_page:
 819                 /* allocate a new page if necessary */
 820                 if (!buffer_info->page) {
 821                         buffer_info->page = alloc_page(gfp);
 822                         if (unlikely(!buffer_info->page)) {
 823                                 adapter->alloc_rx_buff_failed++;
 824                                 break;
 825                         }
 826                 }
 827
 828                 if (!buffer_info->dma)
 829                         buffer_info->dma = dma_map_page(&pdev->dev,
 830                                                         buffer_info->page, 0,
 831                                                         PAGE_SIZE,
 832                                                         DMA_FROM_DEVICE);
 833
 834                 rx_desc = E1000_RX_DESC_EXT(*rx_ring, i);
 835                 rx_desc->read.buffer_addr = cpu_to_le64(buffer_info->dma);
 836
 837                 if (unlikely(++i == rx_ring->count))
 838                         i = 0;
 839                 buffer_info = &rx_ring->buffer_info[i];
 840         }
 841
 842         if (likely(rx_ring->next_to_use != i)) {
 843                 rx_ring->next_to_use = i;
 844                 if (unlikely(i-- == 0))
 845                         i = (rx_ring->count - 1);
 846
 847                 /* Force memory writes to complete before letting h/w
 848                  * know there are new descriptors to fetch.  (Only
 849                  * applicable for weak-ordered memory model archs,
 850                  * such as IA-64). */
 851                 wmb();
 852                 if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
 853                         e1000e_update_rdt_wa(adapter, i);
 854                 else
 855                         writel(i, adapter->hw.hw_addr + rx_ring->tail);
 856         }
 857 }
 858
 859 /**
 860  * e1000_clean_rx_irq - Send received data up the network stack; legacy
 861  * @adapter: board private structure
 862  *
 863  * the return value indicates whether actual cleaning was done, there
 864  * is no guarantee that everything was cleaned
 865  **/
 866 static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
 867                                int *work_done, int work_to_do)
 868 {
 869         struct net_device *netdev = adapter->netdev;
 870         struct pci_dev *pdev = adapter->pdev;
 871         struct e1000_hw *hw = &adapter->hw;
 872         struct e1000_ring *rx_ring = adapter->rx_ring;
 873         union e1000_rx_desc_extended *rx_desc, *next_rxd;
 874         struct e1000_buffer *buffer_info, *next_buffer;
 875         u32 length, staterr;
 876         unsigned int i;
 877         int cleaned_count = 0;
 878         bool cleaned = 0;
 879         unsigned int total_rx_bytes = 0, total_rx_packets = 0;
 880
 881         i = rx_ring->next_to_clean;
 882         rx_desc = E1000_RX_DESC_EXT(*rx_ring, i);
 883         staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
 884         buffer_info = &rx_ring->buffer_info[i];
 885
 886         while (staterr & E1000_RXD_STAT_DD) {
 887                 struct sk_buff *skb;
 888
 889                 if (*work_done >= work_to_do)
 890                         break;
 891                 (*work_done)++;
 892                 rmb();  /* read descriptor and rx_buffer_info after status DD */
 893
 894                 skb = buffer_info->skb;
 895                 buffer_info->skb = NULL;
 896
 897                 prefetch(skb->data - NET_IP_ALIGN);
 898
 899                 i++;
 900                 if (i == rx_ring->count)
 901                         i = 0;
 902                 next_rxd = E1000_RX_DESC_EXT(*rx_ring, i);
 903                 prefetch(next_rxd);
 904
 905                 next_buffer = &rx_ring->buffer_info[i];
 906
 907                 cleaned = 1;
 908                 cleaned_count++;
 909                 dma_unmap_single(&pdev->dev,
 910                                  buffer_info->dma,
 911                                  adapter->rx_buffer_len,
 912                                  DMA_FROM_DEVICE);
 913                 buffer_info->dma = 0;
 914
 915                 length = le16_to_cpu(rx_desc->wb.upper.length);
 916
 917                 /*
 918                  * !EOP means multiple descriptors were used to store a single
 919                  * packet, if that's the case we need to toss it.  In fact, we
 920                  * need to toss every packet with the EOP bit clear and the
 921                  * next frame that _does_ have the EOP bit set, as it is by
 922                  * definition only a frame fragment
 923                  */
 924                 if (unlikely(!(staterr & E1000_RXD_STAT_EOP)))
 925                         adapter->flags2 |= FLAG2_IS_DISCARDING;
 926
 927                 if (adapter->flags2 & FLAG2_IS_DISCARDING) {
 928                         /* All receives must fit into a single buffer */
 929                         e_dbg("Receive packet consumed multiple buffers\n");
 930                         /* recycle */
 931                         buffer_info->skb = skb;
 932                         if (staterr & E1000_RXD_STAT_EOP)
 933                                 adapter->flags2 &= ~FLAG2_IS_DISCARDING;
 934                         goto next_desc;
 935                 }
 936
 937                 if (staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK) {
 938                         /* recycle */
 939                         buffer_info->skb = skb;
 940                         goto next_desc;
 941                 }
 942
 943                 /* adjust length to remove Ethernet CRC */
 944                 if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
 945                         length -= 4;
 946
 947                 total_rx_bytes += length;
 948                 total_rx_packets++;
 949
 950                 /*
 951                  * code added for copybreak, this should improve
 952                  * performance for small packets with large amounts
 953                  * of reassembly being done in the stack
 954                  */
 955                 if (length < copybreak) {
 956                         struct sk_buff *new_skb =
 957                             netdev_alloc_skb_ip_align(netdev, length);
 958                         if (new_skb) {
 959                                 skb_copy_to_linear_data_offset(new_skb,
 960                                                                -NET_IP_ALIGN,
 961                                                                (skb->data -
 962                                                                 NET_IP_ALIGN),
 963                                                                (length +
 964                                                                 NET_IP_ALIGN));
 965                                 /* save the skb in buffer_info as good */
 966                                 buffer_info->skb = skb;
 967                                 skb = new_skb;
 968                         }
 969                         /* else just continue with the old one */
 970                 }
 971                 /* end copybreak code */
 972                 skb_put(skb, length);
 973
 974                 /* Receive Checksum Offload */
 975                 e1000_rx_checksum(adapter, staterr,
 976                                   le16_to_cpu(rx_desc->wb.lower.hi_dword.
 977                                               csum_ip.csum), skb);
 978
 979                 e1000_receive_skb(adapter, netdev, skb, staterr,
 980                                   rx_desc->wb.upper.vlan);
 981
 982 next_desc:
 983                 rx_desc->wb.upper.status_error &= cpu_to_le32(~0xFF);
 984
 985                 /* return some buffers to hardware, one at a time is too slow */
 986                 if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
 987                         adapter->alloc_rx_buf(adapter, cleaned_count,
 988                                               GFP_ATOMIC);
 989                         cleaned_count = 0;
 990                 }
 991
 992                 /* use prefetched values */
 993                 rx_desc = next_rxd;
 994                 buffer_info = next_buffer;
 995
 996                 staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
 997         }
 998         rx_ring->next_to_clean = i;
 999
1000         cleaned_count = e1000_desc_unused(rx_ring);
1001         if (cleaned_count)
1002                 adapter->alloc_rx_buf(adapter, cleaned_count, GFP_ATOMIC);
1003
1004         adapter->total_rx_bytes += total_rx_bytes;
1005         adapter->total_rx_packets += total_rx_packets;
1006         return cleaned;
1007 }
1008
1009 static void e1000_put_txbuf(struct e1000_adapter *adapter,
1010                              struct e1000_buffer *buffer_info)
1011 {
1012         if (buffer_info->dma) {
1013                 if (buffer_info->mapped_as_page)
1014                         dma_unmap_page(&adapter->pdev->dev, buffer_info->dma,
1015                                        buffer_info->length, DMA_TO_DEVICE);
1016                 else
1017                         dma_unmap_single(&adapter->pdev->dev, buffer_info->dma,
1018                                          buffer_info->length, DMA_TO_DEVICE);
1019                 buffer_info->dma = 0;
1020         }
1021         if (buffer_info->skb) {
1022                 dev_kfree_skb_any(buffer_info->skb);
1023                 buffer_info->skb = NULL;
1024         }
1025         buffer_info->time_stamp = 0;
1026 }
1027
1028 static void e1000_print_hw_hang(struct work_struct *work)
1029 {
1030         struct e1000_adapter *adapter = container_of(work,
1031                                                      struct e1000_adapter,
1032                                                      print_hang_task);
1033         struct e1000_ring *tx_ring = adapter->tx_ring;
1034         unsigned int i = tx_ring->next_to_clean;
1035         unsigned int eop = tx_ring->buffer_info[i].next_to_watch;
1036         struct e1000_tx_desc *eop_desc = E1000_TX_DESC(*tx_ring, eop);
1037         struct e1000_hw *hw = &adapter->hw;
1038         u16 phy_status, phy_1000t_status, phy_ext_status;
1039         u16 pci_status;
1040
1041         if (test_bit(__E1000_DOWN, &adapter->state))
1042                 return;
1043
1044         e1e_rphy(hw, PHY_STATUS, &phy_status);
1045         e1e_rphy(hw, PHY_1000T_STATUS, &phy_1000t_status);
1046         e1e_rphy(hw, PHY_EXT_STATUS, &phy_ext_status);
1047
1048         pci_read_config_word(adapter->pdev, PCI_STATUS, &pci_status);
1049
1050         /* detected Hardware unit hang */
1051         e_err("Detected Hardware Unit Hang:\n"
1052               "  TDH                  <%x>\n"
1053               "  TDT                  <%x>\n"
1054               "  next_to_use          <%x>\n"
1055               "  next_to_clean        <%x>\n"
1056               "buffer_info[next_to_clean]:\n"
1057               "  time_stamp           <%lx>\n"
1058               "  next_to_watch        <%x>\n"
1059               "  jiffies              <%lx>\n"
1060               "  next_to_watch.status <%x>\n"
1061               "MAC Status             <%x>\n"
1062               "PHY Status             <%x>\n"
1063               "PHY 1000BASE-T Status  <%x>\n"
1064               "PHY Extended Status    <%x>\n"
1065               "PCI Status             <%x>\n",
1066               readl(adapter->hw.hw_addr + tx_ring->head),
1067               readl(adapter->hw.hw_addr + tx_ring->tail),
1068               tx_ring->next_to_use,
1069               tx_ring->next_to_clean,
1070               tx_ring->buffer_info[eop].time_stamp,
1071               eop,
1072               jiffies,
1073               eop_desc->upper.fields.status,
1074               er32(STATUS),
1075               phy_status,
1076               phy_1000t_status,
1077               phy_ext_status,
1078               pci_status);
1079 }
1080
1081 /**
1082  * e1000_clean_tx_irq - Reclaim resources after transmit completes
1083  * @adapter: board private structure
1084  *
1085  * the return value indicates whether actual cleaning was done, there
1086  * is no guarantee that everything was cleaned
1087  **/
1088 static bool e1000_clean_tx_irq(struct e1000_adapter *adapter)
1089 {
1090         struct net_device *netdev = adapter->netdev;
1091         struct e1000_hw *hw = &adapter->hw;
1092         struct e1000_ring *tx_ring = adapter->tx_ring;
1093         struct e1000_tx_desc *tx_desc, *eop_desc;
1094         struct e1000_buffer *buffer_info;
1095         unsigned int i, eop;
1096         unsigned int count = 0;
1097         unsigned int total_tx_bytes = 0, total_tx_packets = 0;
1098
1099         i = tx_ring->next_to_clean;
1100         eop = tx_ring->buffer_info[i].next_to_watch;
1101         eop_desc = E1000_TX_DESC(*tx_ring, eop);
1102
1103         while ((eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) &&
1104                (count < tx_ring->count)) {
1105                 bool cleaned = false;
1106                 rmb(); /* read buffer_info after eop_desc */
1107                 for (; !cleaned; count++) {
1108                         tx_desc = E1000_TX_DESC(*tx_ring, i);
1109                         buffer_info = &tx_ring->buffer_info[i];
1110                         cleaned = (i == eop);
1111
1112                         if (cleaned) {
1113                                 total_tx_packets += buffer_info->segs;
1114                                 total_tx_bytes += buffer_info->bytecount;
1115                         }
1116
1117                         e1000_put_txbuf(adapter, buffer_info);
1118                         tx_desc->upper.data = 0;
1119
1120                         i++;
1121                         if (i == tx_ring->count)
1122                                 i = 0;
1123                 }
1124
1125                 if (i == tx_ring->next_to_use)
1126                         break;
1127                 eop = tx_ring->buffer_info[i].next_to_watch;
1128                 eop_desc = E1000_TX_DESC(*tx_ring, eop);
1129         }
1130
1131         tx_ring->next_to_clean = i;
1132
1133 #define TX_WAKE_THRESHOLD 32
1134         if (count && netif_carrier_ok(netdev) &&
1135             e1000_desc_unused(tx_ring) >= TX_WAKE_THRESHOLD) {
1136                 /* Make sure that anybody stopping the queue after this
1137                  * sees the new next_to_clean.
1138                  */
1139                 smp_mb();
1140
1141                 if (netif_queue_stopped(netdev) &&
1142                     !(test_bit(__E1000_DOWN, &adapter->state))) {
1143                         netif_wake_queue(netdev);
1144                         ++adapter->restart_queue;
1145                 }
1146         }
1147
1148         if (adapter->detect_tx_hung) {
1149                 /*
1150                  * Detect a transmit hang in hardware, this serializes the
1151                  * check with the clearing of time_stamp and movement of i
1152                  */
1153                 adapter->detect_tx_hung = 0;
1154                 if (tx_ring->buffer_info[i].time_stamp &&
1155                     time_after(jiffies, tx_ring->buffer_info[i].time_stamp
1156                                + (adapter->tx_timeout_factor * HZ)) &&
1157                     !(er32(STATUS) & E1000_STATUS_TXOFF)) {
1158                         schedule_work(&adapter->print_hang_task);
1159                         netif_stop_queue(netdev);
1160                 }
1161         }
1162         adapter->total_tx_bytes += total_tx_bytes;
1163         adapter->total_tx_packets += total_tx_packets;
1164         return count < tx_ring->count;
1165 }
1166
1167 /**
1168  * e1000_clean_rx_irq_ps - Send received data up the network stack; packet split
1169  * @adapter: board private structure
1170  *
1171  * the return value indicates whether actual cleaning was done, there
1172  * is no guarantee that everything was cleaned
1173  **/
1174 static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
1175                                   int *work_done, int work_to_do)
1176 {
1177         struct e1000_hw *hw = &adapter->hw;
1178         union e1000_rx_desc_packet_split *rx_desc, *next_rxd;
1179         struct net_device *netdev = adapter->netdev;
1180         struct pci_dev *pdev = adapter->pdev;
1181         struct e1000_ring *rx_ring = adapter->rx_ring;
1182         struct e1000_buffer *buffer_info, *next_buffer;
1183         struct e1000_ps_page *ps_page;
1184         struct sk_buff *skb;
1185         unsigned int i, j;
1186         u32 length, staterr;
1187         int cleaned_count = 0;
1188         bool cleaned = 0;
1189         unsigned int total_rx_bytes = 0, total_rx_packets = 0;
1190
1191         i = rx_ring->next_to_clean;
1192         rx_desc = E1000_RX_DESC_PS(*rx_ring, i);
1193         staterr = le32_to_cpu(rx_desc->wb.middle.status_error);
1194         buffer_info = &rx_ring->buffer_info[i];
1195
1196         while (staterr & E1000_RXD_STAT_DD) {
1197                 if (*work_done >= work_to_do)
1198                         break;
1199                 (*work_done)++;
1200                 skb = buffer_info->skb;
1201                 rmb();  /* read descriptor and rx_buffer_info after status DD */
1202
1203                 /* in the packet split case this is header only */
1204                 prefetch(skb->data - NET_IP_ALIGN);
1205
1206                 i++;
1207                 if (i == rx_ring->count)
1208                         i = 0;
1209                 next_rxd = E1000_RX_DESC_PS(*rx_ring, i);
1210                 prefetch(next_rxd);
1211
1212                 next_buffer = &rx_ring->buffer_info[i];
1213
1214                 cleaned = 1;
1215                 cleaned_count++;
1216                 dma_unmap_single(&pdev->dev, buffer_info->dma,
1217                                  adapter->rx_ps_bsize0, DMA_FROM_DEVICE);
1218                 buffer_info->dma = 0;
1219
1220                 /* see !EOP comment in other Rx routine */
1221                 if (!(staterr & E1000_RXD_STAT_EOP))
1222                         adapter->flags2 |= FLAG2_IS_DISCARDING;
1223
1224                 if (adapter->flags2 & FLAG2_IS_DISCARDING) {
1225                         e_dbg("Packet Split buffers didn't pick up the full "
1226                               "packet\n");
1227                         dev_kfree_skb_irq(skb);
1228                         if (staterr & E1000_RXD_STAT_EOP)
1229                                 adapter->flags2 &= ~FLAG2_IS_DISCARDING;
1230                         goto next_desc;
1231                 }
1232
1233                 if (staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK) {
1234                         dev_kfree_skb_irq(skb);
1235                         goto next_desc;
1236                 }
1237
1238                 length = le16_to_cpu(rx_desc->wb.middle.length0);
1239
1240                 if (!length) {
1241                         e_dbg("Last part of the packet spanning multiple "
1242                               "descriptors\n");
1243                         dev_kfree_skb_irq(skb);
1244                         goto next_desc;
1245                 }
1246
1247                 /* Good Receive */
1248                 skb_put(skb, length);
1249
1250                 {
1251                 /*
1252                  * this looks ugly, but it seems compiler issues make it
1253                  * more efficient than reusing j
1254                  */
1255                 int l1 = le16_to_cpu(rx_desc->wb.upper.length[0]);
1256
1257                 /*
1258                  * page alloc/put takes too long and effects small packet
1259                  * throughput, so unsplit small packets and save the alloc/put
1260                  * only valid in softirq (napi) context to call kmap_*
1261                  */
1262                 if (l1 && (l1 <= copybreak) &&
1263                     ((length + l1) <= adapter->rx_ps_bsize0)) {
1264                         u8 *vaddr;
1265
1266                         ps_page = &buffer_info->ps_pages[0];
1267
1268                         /*
1269                          * there is no documentation about how to call
1270                          * kmap_atomic, so we can't hold the mapping
1271                          * very long
1272                          */
1273                         dma_sync_single_for_cpu(&pdev->dev, ps_page->dma,
1274                                                 PAGE_SIZE, DMA_FROM_DEVICE);
1275                         vaddr = kmap_atomic(ps_page->page, KM_SKB_DATA_SOFTIRQ);
1276                         memcpy(skb_tail_pointer(skb), vaddr, l1);
1277                         kunmap_atomic(vaddr, KM_SKB_DATA_SOFTIRQ);
1278                         dma_sync_single_for_device(&pdev->dev, ps_page->dma,
1279                                                    PAGE_SIZE, DMA_FROM_DEVICE);
1280
1281                         /* remove the CRC */
1282                         if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
1283                                 l1 -= 4;
1284
1285                         skb_put(skb, l1);
1286                         goto copydone;
1287                 } /* if */
1288                 }
1289
1290                 for (j = 0; j < PS_PAGE_BUFFERS; j++) {
1291                         length = le16_to_cpu(rx_desc->wb.upper.length[j]);
1292                         if (!length)
1293                                 break;
1294
1295                         ps_page = &buffer_info->ps_pages[j];
1296                         dma_unmap_page(&pdev->dev, ps_page->dma, PAGE_SIZE,
1297                                        DMA_FROM_DEVICE);
1298                         ps_page->dma = 0;
1299                         skb_fill_page_desc(skb, j, ps_page->page, 0, length);
1300                         ps_page->page = NULL;
1301                         skb->len += length;
1302                         skb->data_len += length;
1303                         skb->truesize += PAGE_SIZE;
1304                 }
1305
1306                 /* strip the ethernet crc, problem is we're using pages now so
1307                  * this whole operation can get a little cpu intensive
1308                  */
1309                 if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
1310                         pskb_trim(skb, skb->len - 4);
1311
1312 copydone:
1313                 total_rx_bytes += skb->len;
1314                 total_rx_packets++;
1315
1316                 e1000_rx_checksum(adapter, staterr, le16_to_cpu(
1317                         rx_desc->wb.lower.hi_dword.csum_ip.csum), skb);
1318
1319                 if (rx_desc->wb.upper.header_status &
1320                            cpu_to_le16(E1000_RXDPS_HDRSTAT_HDRSP))
1321                         adapter->rx_hdr_split++;
1322
1323                 e1000_receive_skb(adapter, netdev, skb,
1324                                   staterr, rx_desc->wb.middle.vlan);
1325
1326 next_desc:
1327                 rx_desc->wb.middle.status_error &= cpu_to_le32(~0xFF);
1328                 buffer_info->skb = NULL;
1329
1330                 /* return some buffers to hardware, one at a time is too slow */
1331                 if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
1332                         adapter->alloc_rx_buf(adapter, cleaned_count,
1333                                               GFP_ATOMIC);
1334                         cleaned_count = 0;
1335                 }
1336
1337                 /* use prefetched values */
1338                 rx_desc = next_rxd;
1339                 buffer_info = next_buffer;
1340
1341                 staterr = le32_to_cpu(rx_desc->wb.middle.status_error);
1342         }
1343         rx_ring->next_to_clean = i;
1344
1345         cleaned_count = e1000_desc_unused(rx_ring);
1346         if (cleaned_count)
1347                 adapter->alloc_rx_buf(adapter, cleaned_count, GFP_ATOMIC);
1348
1349         adapter->total_rx_bytes += total_rx_bytes;
1350         adapter->total_rx_packets += total_rx_packets;
1351         return cleaned;
1352 }
1353
1354 /**
1355  * e1000_consume_page - helper function
1356  **/
1357 static void e1000_consume_page(struct e1000_buffer *bi, struct sk_buff *skb,
1358                                u16 length)
1359 {
1360         bi->page = NULL;
1361         skb->len += length;
1362         skb->data_len += length;
1363         skb->truesize += PAGE_SIZE;
1364 }
1365
1366 /**
1367  * e1000_clean_jumbo_rx_irq - Send received data up the network stack; legacy
1368  * @adapter: board private structure
1369  *
1370  * the return value indicates whether actual cleaning was done, there
1371  * is no guarantee that everything was cleaned
1372  **/
1373
1374 static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter,
1375                                      int *work_done, int work_to_do)
1376 {
1377         struct net_device *netdev = adapter->netdev;
1378         struct pci_dev *pdev = adapter->pdev;
1379         struct e1000_ring *rx_ring = adapter->rx_ring;
1380         union e1000_rx_desc_extended *rx_desc, *next_rxd;
1381         struct e1000_buffer *buffer_info, *next_buffer;
1382         u32 length, staterr;
1383         unsigned int i;
1384         int cleaned_count = 0;
1385         bool cleaned = false;
1386         unsigned int total_rx_bytes=0, total_rx_packets=0;
1387
1388         i = rx_ring->next_to_clean;
1389         rx_desc = E1000_RX_DESC_EXT(*rx_ring, i);
1390         staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
1391         buffer_info = &rx_ring->buffer_info[i];
1392
1393         while (staterr & E1000_RXD_STAT_DD) {
1394                 struct sk_buff *skb;
1395
1396                 if (*work_done >= work_to_do)
1397                         break;
1398                 (*work_done)++;
1399                 rmb();  /* read descriptor and rx_buffer_info after status DD */
1400
1401                 skb = buffer_info->skb;
1402                 buffer_info->skb = NULL;
1403
1404                 ++i;
1405                 if (i == rx_ring->count)
1406                         i = 0;
1407                 next_rxd = E1000_RX_DESC_EXT(*rx_ring, i);
1408                 prefetch(next_rxd);
1409
1410                 next_buffer = &rx_ring->buffer_info[i];
1411
1412                 cleaned = true;
1413                 cleaned_count++;
1414                 dma_unmap_page(&pdev->dev, buffer_info->dma, PAGE_SIZE,
1415                                DMA_FROM_DEVICE);
1416                 buffer_info->dma = 0;
1417
1418                 length = le16_to_cpu(rx_desc->wb.upper.length);
1419
1420                 /* errors is only valid for DD + EOP descriptors */
1421                 if (unlikely((staterr & E1000_RXD_STAT_EOP) &&
1422                              (staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK))) {
1423                         /* recycle both page and skb */
1424                         buffer_info->skb = skb;
1425                         /* an error means any chain goes out the window too */
1426                         if (rx_ring->rx_skb_top)
1427                                 dev_kfree_skb_irq(rx_ring->rx_skb_top);
1428                         rx_ring->rx_skb_top = NULL;
1429                         goto next_desc;
1430                 }
1431
1432 #define rxtop (rx_ring->rx_skb_top)
1433                 if (!(staterr & E1000_RXD_STAT_EOP)) {
1434                         /* this descriptor is only the beginning (or middle) */
1435                         if (!rxtop) {
1436                                 /* this is the beginning of a chain */
1437                                 rxtop = skb;
1438                                 skb_fill_page_desc(rxtop, 0, buffer_info->page,
1439                                                    0, length);
1440                         } else {
1441                                 /* this is the middle of a chain */
1442                                 skb_fill_page_desc(rxtop,
1443                                     skb_shinfo(rxtop)->nr_frags,
1444                                     buffer_info->page, 0, length);
1445                                 /* re-use the skb, only consumed the page */
1446                                 buffer_info->skb = skb;
1447                         }
1448                         e1000_consume_page(buffer_info, rxtop, length);
1449                         goto next_desc;
1450                 } else {
1451                         if (rxtop) {
1452                                 /* end of the chain */
1453                                 skb_fill_page_desc(rxtop,
1454                                     skb_shinfo(rxtop)->nr_frags,
1455                                     buffer_info->page, 0, length);
1456                                 /* re-use the current skb, we only consumed the
1457                                  * page */
1458                                 buffer_info->skb = skb;
1459                                 skb = rxtop;
1460                                 rxtop = NULL;
1461                                 e1000_consume_page(buffer_info, skb, length);
1462                         } else {
1463                                 /* no chain, got EOP, this buf is the packet
1464                                  * copybreak to save the put_page/alloc_page */
1465                                 if (length <= copybreak &&
1466                                     skb_tailroom(skb) >= length) {
1467                                         u8 *vaddr;
1468                                         vaddr = kmap_atomic(buffer_info->page,
1469                                                            KM_SKB_DATA_SOFTIRQ);
1470                                         memcpy(skb_tail_pointer(skb), vaddr,
1471                                                length);
1472                                         kunmap_atomic(vaddr,
1473                                                       KM_SKB_DATA_SOFTIRQ);
1474                                         /* re-use the page, so don't erase
1475                                          * buffer_info->page */
1476                                         skb_put(skb, length);
1477                                 } else {
1478                                         skb_fill_page_desc(skb, 0,
1479                                                            buffer_info->page, 0,
1480                                                            length);
1481                                         e1000_consume_page(buffer_info, skb,
1482                                                            length);
1483                                 }
1484                         }
1485                 }
1486
1487                 /* Receive Checksum Offload XXX recompute due to CRC strip? */
1488                 e1000_rx_checksum(adapter, staterr,
1489                                   le16_to_cpu(rx_desc->wb.lower.hi_dword.
1490                                               csum_ip.csum), skb);
1491
1492                 /* probably a little skewed due to removing CRC */
1493                 total_rx_bytes += skb->len;
1494                 total_rx_packets++;
1495
1496                 /* eth type trans needs skb->data to point to something */
1497                 if (!pskb_may_pull(skb, ETH_HLEN)) {
1498                         e_err("pskb_may_pull failed.\n");
1499                         dev_kfree_skb_irq(skb);
1500                         goto next_desc;
1501                 }
1502
1503                 e1000_receive_skb(adapter, netdev, skb, staterr,
1504                                   rx_desc->wb.upper.vlan);
1505
1506 next_desc:
1507                 rx_desc->wb.upper.status_error &= cpu_to_le32(~0xFF);
1508
1509                 /* return some buffers to hardware, one at a time is too slow */
1510                 if (unlikely(cleaned_count >= E1000_RX_BUFFER_WRITE)) {
1511                         adapter->alloc_rx_buf(adapter, cleaned_count,
1512                                               GFP_ATOMIC);
1513                         cleaned_count = 0;
1514                 }
1515
1516                 /* use prefetched values */
1517                 rx_desc = next_rxd;
1518                 buffer_info = next_buffer;
1519
1520                 staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
1521         }
1522         rx_ring->next_to_clean = i;
1523
1524         cleaned_count = e1000_desc_unused(rx_ring);
1525         if (cleaned_count)
1526                 adapter->alloc_rx_buf(adapter, cleaned_count, GFP_ATOMIC);
1527
1528         adapter->total_rx_bytes += total_rx_bytes;
1529         adapter->total_rx_packets += total_rx_packets;
1530         return cleaned;
1531 }
1532
1533 /**
1534  * e1000_clean_rx_ring - Free Rx Buffers per Queue
1535  * @adapter: board private structure
1536  **/
1537 static void e1000_clean_rx_ring(struct e1000_adapter *adapter)
1538 {
1539         struct e1000_ring *rx_ring = adapter->rx_ring;
1540         struct e1000_buffer *buffer_info;
1541         struct e1000_ps_page *ps_page;
1542         struct pci_dev *pdev = adapter->pdev;
1543         unsigned int i, j;
1544
1545         /* Free all the Rx ring sk_buffs */
1546         for (i = 0; i < rx_ring->count; i++) {
1547                 buffer_info = &rx_ring->buffer_info[i];
1548                 if (buffer_info->dma) {
1549                         if (adapter->clean_rx == e1000_clean_rx_irq)
1550                                 dma_unmap_single(&pdev->dev, buffer_info->dma,
1551                                                  adapter->rx_buffer_len,
1552                                                  DMA_FROM_DEVICE);
1553                         else if (adapter->clean_rx == e1000_clean_jumbo_rx_irq)
1554                                 dma_unmap_page(&pdev->dev, buffer_info->dma,
1555                                                PAGE_SIZE,
1556                                                DMA_FROM_DEVICE);
1557                         else if (adapter->clean_rx == e1000_clean_rx_irq_ps)
1558                                 dma_unmap_single(&pdev->dev, buffer_info->dma,
1559                                                  adapter->rx_ps_bsize0,
1560                                                  DMA_FROM_DEVICE);
1561                         buffer_info->dma = 0;
1562                 }
1563
1564                 if (buffer_info->page) {
1565                         put_page(buffer_info->page);
1566                         buffer_info->page = NULL;
1567                 }
1568
1569                 if (buffer_info->skb) {
1570                         dev_kfree_skb(buffer_info->skb);
1571                         buffer_info->skb = NULL;
1572                 }
1573
1574                 for (j = 0; j < PS_PAGE_BUFFERS; j++) {
1575                         ps_page = &buffer_info->ps_pages[j];
1576                         if (!ps_page->page)
1577                                 break;
1578                         dma_unmap_page(&pdev->dev, ps_page->dma, PAGE_SIZE,
1579                                        DMA_FROM_DEVICE);
1580                         ps_page->dma = 0;
1581                         put_page(ps_page->page);
1582                         ps_page->page = NULL;
1583                 }
1584         }
1585
1586         /* there also may be some cached data from a chained receive */
1587         if (rx_ring->rx_skb_top) {
1588                 dev_kfree_skb(rx_ring->rx_skb_top);
1589                 rx_ring->rx_skb_top = NULL;
1590         }
1591
1592         /* Zero out the descriptor ring */
1593         memset(rx_ring->desc, 0, rx_ring->size);
1594
1595         rx_ring->next_to_clean = 0;
1596         rx_ring->next_to_use = 0;
1597         adapter->flags2 &= ~FLAG2_IS_DISCARDING;
1598
1599         writel(0, adapter->hw.hw_addr + rx_ring->head);
1600         writel(0, adapter->hw.hw_addr + rx_ring->tail);
1601 }
1602
1603 static void e1000e_downshift_workaround(struct work_struct *work)
1604 {
1605         struct e1000_adapter *adapter = container_of(work,
1606                                         struct e1000_adapter, downshift_task);
1607
1608         if (test_bit(__E1000_DOWN, &adapter->state))
1609                 return;
1610
1611         e1000e_gig_downshift_workaround_ich8lan(&adapter->hw);
1612 }
1613
1614 /**
1615  * e1000_intr_msi - Interrupt Handler
1616  * @irq: interrupt number
1617  * @data: pointer to a network interface device structure
1618  **/
1619 static irqreturn_t e1000_intr_msi(int irq, void *data)
1620 {
1621         struct net_device *netdev = data;
1622         struct e1000_adapter *adapter = netdev_priv(netdev);
1623         struct e1000_hw *hw = &adapter->hw;
1624         u32 icr = er32(ICR);
1625
1626         /*
1627          * read ICR disables interrupts using IAM
1628          */
1629
1630         if (icr & E1000_ICR_LSC) {
1631                 hw->mac.get_link_status = 1;
1632                 /*
1633                  * ICH8 workaround-- Call gig speed drop workaround on cable
1634                  * disconnect (LSC) before accessing any PHY registers
1635                  */
1636                 if ((adapter->flags & FLAG_LSC_GIG_SPEED_DROP) &&
1637                     (!(er32(STATUS) & E1000_STATUS_LU)))
1638                         schedule_work(&adapter->downshift_task);
1639
1640                 /*
1641                  * 80003ES2LAN workaround-- For packet buffer work-around on
1642                  * link down event; disable receives here in the ISR and reset
1643                  * adapter in watchdog
1644                  */
1645                 if (netif_carrier_ok(netdev) &&
1646                     adapter->flags & FLAG_RX_NEEDS_RESTART) {
1647                         /* disable receives */
1648                         u32 rctl = er32(RCTL);
1649                         ew32(RCTL, rctl & ~E1000_RCTL_EN);
1650                         adapter->flags |= FLAG_RX_RESTART_NOW;
1651                 }
1652                 /* guard against interrupt when we're going down */
1653                 if (!test_bit(__E1000_DOWN, &adapter->state))
1654                         mod_timer(&adapter->watchdog_timer, jiffies + 1);
1655         }
1656
1657         if (napi_schedule_prep(&adapter->napi)) {
1658                 adapter->total_tx_bytes = 0;
1659                 adapter->total_tx_packets = 0;
1660                 adapter->total_rx_bytes = 0;
1661                 adapter->total_rx_packets = 0;
1662                 __napi_schedule(&adapter->napi);
1663         }
1664
1665         return IRQ_HANDLED;
1666 }
1667
1668 /**
1669  * e1000_intr - Interrupt Handler
1670  * @irq: interrupt number
1671  * @data: pointer to a network interface device structure
1672  **/
1673 static irqreturn_t e1000_intr(int irq, void *data)
1674 {
1675         struct net_device *netdev = data;
1676         struct e1000_adapter *adapter = netdev_priv(netdev);
1677         struct e1000_hw *hw = &adapter->hw;
1678         u32 rctl, icr = er32(ICR);
1679
1680         if (!icr || test_bit(__E1000_DOWN, &adapter->state))
1681                 return IRQ_NONE;  /* Not our interrupt */
1682
1683         /*
1684          * IMS will not auto-mask if INT_ASSERTED is not set, and if it is
1685          * not set, then the adapter didn't send an interrupt
1686          */
1687         if (!(icr & E1000_ICR_INT_ASSERTED))
1688                 return IRQ_NONE;
1689
1690         /*
1691          * Interrupt Auto-Mask...upon reading ICR,
1692          * interrupts are masked.  No need for the
1693          * IMC write
1694          */
1695
1696         if (icr & E1000_ICR_LSC) {
1697                 hw->mac.get_link_status = 1;
1698                 /*
1699                  * ICH8 workaround-- Call gig speed drop workaround on cable
1700                  * disconnect (LSC) before accessing any PHY registers
1701                  */
1702                 if ((adapter->flags & FLAG_LSC_GIG_SPEED_DROP) &&
1703                     (!(er32(STATUS) & E1000_STATUS_LU)))
1704                         schedule_work(&adapter->downshift_task);
1705
1706                 /*
1707                  * 80003ES2LAN workaround--
1708                  * For packet buffer work-around on link down event;
1709                  * disable receives here in the ISR and
1710                  * reset adapter in watchdog
1711                  */
1712                 if (netif_carrier_ok(netdev) &&
1713                     (adapter->flags & FLAG_RX_NEEDS_RESTART)) {
1714                         /* disable receives */
1715                         rctl = er32(RCTL);
1716                         ew32(RCTL, rctl & ~E1000_RCTL_EN);
1717                         adapter->flags |= FLAG_RX_RESTART_NOW;
1718                 }
1719                 /* guard against interrupt when we're going down */
1720                 if (!test_bit(__E1000_DOWN, &adapter->state))
1721                         mod_timer(&adapter->watchdog_timer, jiffies + 1);
1722         }
1723
1724         if (napi_schedule_prep(&adapter->napi)) {
1725                 adapter->total_tx_bytes = 0;
1726                 adapter->total_tx_packets = 0;
1727                 adapter->total_rx_bytes = 0;
1728                 adapter->total_rx_packets = 0;
1729                 __napi_schedule(&adapter->napi);
1730         }
1731
1732         return IRQ_HANDLED;
1733 }
1734
1735 static irqreturn_t e1000_msix_other(int irq, void *data)
1736 {
1737         struct net_device *netdev = data;
1738         struct e1000_adapter *adapter = netdev_priv(netdev);
1739         struct e1000_hw *hw = &adapter->hw;
1740         u32 icr = er32(ICR);
1741
1742         if (!(icr & E1000_ICR_INT_ASSERTED)) {
1743                 if (!test_bit(__E1000_DOWN, &adapter->state))
1744                         ew32(IMS, E1000_IMS_OTHER);
1745                 return IRQ_NONE;
1746         }
1747
1748         if (icr & adapter->eiac_mask)
1749                 ew32(ICS, (icr & adapter->eiac_mask));
1750
1751         if (icr & E1000_ICR_OTHER) {
1752                 if (!(icr & E1000_ICR_LSC))
1753                         goto no_link_interrupt;
1754                 hw->mac.get_link_status = 1;
1755                 /* guard against interrupt when we're going down */
1756                 if (!test_bit(__E1000_DOWN, &adapter->state))
1757                         mod_timer(&adapter->watchdog_timer, jiffies + 1);
1758         }
1759
1760 no_link_interrupt:
1761         if (!test_bit(__E1000_DOWN, &adapter->state))
1762                 ew32(IMS, E1000_IMS_LSC | E1000_IMS_OTHER);
1763
1764         return IRQ_HANDLED;
1765 }
1766
1767
1768 static irqreturn_t e1000_intr_msix_tx(int irq, void *data)
1769 {
1770         struct net_device *netdev = data;
1771         struct e1000_adapter *adapter = netdev_priv(netdev);
1772         struct e1000_hw *hw = &adapter->hw;
1773         struct e1000_ring *tx_ring = adapter->tx_ring;
1774
1775
1776         adapter->total_tx_bytes = 0;
1777         adapter->total_tx_packets = 0;
1778
1779         if (!e1000_clean_tx_irq(adapter))
1780                 /* Ring was not completely cleaned, so fire another interrupt */
1781                 ew32(ICS, tx_ring->ims_val);
1782
1783         return IRQ_HANDLED;
1784 }
1785
1786 static irqreturn_t e1000_intr_msix_rx(int irq, void *data)
1787 {
1788         struct net_device *netdev = data;
1789         struct e1000_adapter *adapter = netdev_priv(netdev);
1790
1791         /* Write the ITR value calculated at the end of the
1792          * previous interrupt.
1793          */
1794         if (adapter->rx_ring->set_itr) {
1795                 writel(1000000000 / (adapter->rx_ring->itr_val * 256),
1796                        adapter->hw.hw_addr + adapter->rx_ring->itr_register);
1797                 adapter->rx_ring->set_itr = 0;
1798         }
1799
1800         if (napi_schedule_prep(&adapter->napi)) {
1801                 adapter->total_rx_bytes = 0;
1802                 adapter->total_rx_packets = 0;
1803                 __napi_schedule(&adapter->napi);
1804         }
1805         return IRQ_HANDLED;
1806 }
1807
1808 /**
1809  * e1000_configure_msix - Configure MSI-X hardware
1810  *
1811  * e1000_configure_msix sets up the hardware to properly
1812  * generate MSI-X interrupts.
1813  **/
1814 static void e1000_configure_msix(struct e1000_adapter *adapter)
1815 {
1816         struct e1000_hw *hw = &adapter->hw;
1817         struct e1000_ring *rx_ring = adapter->rx_ring;
1818         struct e1000_ring *tx_ring = adapter->tx_ring;
1819         int vector = 0;
1820         u32 ctrl_ext, ivar = 0;
1821
1822         adapter->eiac_mask = 0;
1823
1824         /* Workaround issue with spurious interrupts on 82574 in MSI-X mode */
1825         if (hw->mac.type == e1000_82574) {
1826                 u32 rfctl = er32(RFCTL);
1827                 rfctl |= E1000_RFCTL_ACK_DIS;
1828                 ew32(RFCTL, rfctl);
1829         }
1830
1831 #define E1000_IVAR_INT_ALLOC_VALID      0x8
1832         /* Configure Rx vector */
1833         rx_ring->ims_val = E1000_IMS_RXQ0;
1834         adapter->eiac_mask |= rx_ring->ims_val;
1835         if (rx_ring->itr_val)
1836                 writel(1000000000 / (rx_ring->itr_val * 256),
1837                        hw->hw_addr + rx_ring->itr_register);
1838         else
1839                 writel(1, hw->hw_addr + rx_ring->itr_register);
1840         ivar = E1000_IVAR_INT_ALLOC_VALID | vector;
1841
1842         /* Configure Tx vector */
1843         tx_ring->ims_val = E1000_IMS_TXQ0;
1844         vector++;
1845         if (tx_ring->itr_val)
1846                 writel(1000000000 / (tx_ring->itr_val * 256),
1847                        hw->hw_addr + tx_ring->itr_register);
1848         else
1849                 writel(1, hw->hw_addr + tx_ring->itr_register);
1850         adapter->eiac_mask |= tx_ring->ims_val;
1851         ivar |= ((E1000_IVAR_INT_ALLOC_VALID | vector) << 8);
1852
1853         /* set vector for Other Causes, e.g. link changes */
1854         vector++;
1855         ivar |= ((E1000_IVAR_INT_ALLOC_VALID | vector) << 16);
1856         if (rx_ring->itr_val)
1857                 writel(1000000000 / (rx_ring->itr_val * 256),
1858                        hw->hw_addr + E1000_EITR_82574(vector));
1859         else
1860                 writel(1, hw->hw_addr + E1000_EITR_82574(vector));
1861
1862         /* Cause Tx interrupts on every write back */
1863         ivar |= (1 << 31);
1864
1865         ew32(IVAR, ivar);
1866
1867         /* enable MSI-X PBA support */
1868         ctrl_ext = er32(CTRL_EXT);
1869         ctrl_ext |= E1000_CTRL_EXT_PBA_CLR;
1870
1871         /* Auto-Mask Other interrupts upon ICR read */
1872 #define E1000_EIAC_MASK_82574   0x01F00000
1873         ew32(IAM, ~E1000_EIAC_MASK_82574 | E1000_IMS_OTHER);
1874         ctrl_ext |= E1000_CTRL_EXT_EIAME;
1875         ew32(CTRL_EXT, ctrl_ext);
1876         e1e_flush();
1877 }
1878
1879 void e1000e_reset_interrupt_capability(struct e1000_adapter *adapter)
1880 {
1881         if (adapter->msix_entries) {
1882                 pci_disable_msix(adapter->pdev);
1883                 kfree(adapter->msix_entries);
1884                 adapter->msix_entries = NULL;
1885         } else if (adapter->flags & FLAG_MSI_ENABLED) {
1886                 pci_disable_msi(adapter->pdev);
1887                 adapter->flags &= ~FLAG_MSI_ENABLED;
1888         }
1889 }
1890
1891 /**
1892  * e1000e_set_interrupt_capability - set MSI or MSI-X if supported
1893  *
1894  * Attempt to configure interrupts using the best available
1895  * capabilities of the hardware and kernel.
1896  **/
1897 void e1000e_set_interrupt_capability(struct e1000_adapter *adapter)
1898 {
1899         int err;
1900         int i;
1901
1902         switch (adapter->int_mode) {
1903         case E1000E_INT_MODE_MSIX:
1904                 if (adapter->flags & FLAG_HAS_MSIX) {
1905                         adapter->num_vectors = 3; /* RxQ0, TxQ0 and other */
1906                         adapter->msix_entries = kcalloc(adapter->num_vectors,
1907                                                       sizeof(struct msix_entry),
1908                                                       GFP_KERNEL);
1909                         if (adapter->msix_entries) {
1910                                 for (i = 0; i < adapter->num_vectors; i++)
1911                                         adapter->msix_entries[i].entry = i;
1912
1913                                 err = pci_enable_msix(adapter->pdev,
1914                                                       adapter->msix_entries,
1915                                                       adapter->num_vectors);
1916                                 if (err == 0)
1917                                         return;
1918                         }
1919                         /* MSI-X failed, so fall through and try MSI */
1920                         e_err("Failed to initialize MSI-X interrupts.  "
1921                               "Falling back to MSI interrupts.\n");
1922                         e1000e_reset_interrupt_capability(adapter);
1923                 }
1924                 adapter->int_mode = E1000E_INT_MODE_MSI;
1925                 /* Fall through */
1926         case E1000E_INT_MODE_MSI:
1927                 if (!pci_enable_msi(adapter->pdev)) {
1928                         adapter->flags |= FLAG_MSI_ENABLED;
1929                 } else {
1930                         adapter->int_mode = E1000E_INT_MODE_LEGACY;
1931                         e_err("Failed to initialize MSI interrupts.  Falling "
1932                               "back to legacy interrupts.\n");
1933                 }
1934                 /* Fall through */
1935         case E1000E_INT_MODE_LEGACY:
1936                 /* Don't do anything; this is the system default */
1937                 break;
1938         }
1939
1940         /* store the number of vectors being used */
1941         adapter->num_vectors = 1;
1942 }
1943
1944 /**
1945  * e1000_request_msix - Initialize MSI-X interrupts
1946  *
1947  * e1000_request_msix allocates MSI-X vectors and requests interrupts from the
1948  * kernel.
1949  **/
1950 static int e1000_request_msix(struct e1000_adapter *adapter)
1951 {
1952         struct net_device *netdev = adapter->netdev;
1953         int err = 0, vector = 0;
1954
1955         if (strlen(netdev->name) < (IFNAMSIZ - 5))
1956                 snprintf(adapter->rx_ring->name,
1957                          sizeof(adapter->rx_ring->name) - 1,
1958                          "%s-rx-0", netdev->name);
1959         else
1960                 memcpy(adapter->rx_ring->name, netdev->name, IFNAMSIZ);
1961         err = request_irq(adapter->msix_entries[vector].vector,
1962                           e1000_intr_msix_rx, 0, adapter->rx_ring->name,
1963                           netdev);
1964         if (err)
1965                 goto out;
1966         adapter->rx_ring->itr_register = E1000_EITR_82574(vector);
1967         adapter->rx_ring->itr_val = adapter->itr;
1968         vector++;
1969
1970         if (strlen(netdev->name) < (IFNAMSIZ - 5))
1971                 snprintf(adapter->tx_ring->name,
1972                          sizeof(adapter->tx_ring->name) - 1,
1973                          "%s-tx-0", netdev->name);
1974         else
1975                 memcpy(adapter->tx_ring->name, netdev->name, IFNAMSIZ);
1976         err = request_irq(adapter->msix_entries[vector].vector,
1977                           e1000_intr_msix_tx, 0, adapter->tx_ring->name,
1978                           netdev);
1979         if (err)
1980                 goto out;
1981         adapter->tx_ring->itr_register = E1000_EITR_82574(vector);
1982         adapter->tx_ring->itr_val = adapter->itr;
1983         vector++;
1984
1985         err = request_irq(adapter->msix_entries[vector].vector,
1986                           e1000_msix_other, 0, netdev->name, netdev);
1987         if (err)
1988                 goto out;
1989
1990         e1000_configure_msix(adapter);
1991         return 0;
1992 out:
1993         return err;
1994 }
1995
1996 /**
1997  * e1000_request_irq - initialize interrupts
1998  *
1999  * Attempts to configure interrupts using the best available
2000  * capabilities of the hardware and kernel.
2001  **/
2002 static int e1000_request_irq(struct e1000_adapter *adapter)
2003 {
2004         struct net_device *netdev = adapter->netdev;
2005         int err;
2006
2007         if (adapter->msix_entries) {
2008                 err = e1000_request_msix(adapter);
2009                 if (!err)
2010                         return err;
2011                 /* fall back to MSI */
2012                 e1000e_reset_interrupt_capability(adapter);
2013                 adapter->int_mode = E1000E_INT_MODE_MSI;
2014                 e1000e_set_interrupt_capability(adapter);
2015         }
2016         if (adapter->flags & FLAG_MSI_ENABLED) {
2017                 err = request_irq(adapter->pdev->irq, e1000_intr_msi, 0,
2018                                   netdev->name, netdev);
2019                 if (!err)
2020                         return err;
2021
2022                 /* fall back to legacy interrupt */
2023                 e1000e_reset_interrupt_capability(adapter);
2024                 adapter->int_mode = E1000E_INT_MODE_LEGACY;
2025         }
2026
2027         err = request_irq(adapter->pdev->irq, e1000_intr, IRQF_SHARED,
2028                           netdev->name, netdev);
2029         if (err)
2030                 e_err("Unable to allocate interrupt, Error: %d\n", err);
2031
2032         return err;
2033 }
2034
2035 static void e1000_free_irq(struct e1000_adapter *adapter)
2036 {
2037         struct net_device *netdev = adapter->netdev;
2038
2039         if (adapter->msix_entries) {
2040                 int vector = 0;
2041
2042                 free_irq(adapter->msix_entries[vector].vector, netdev);
2043                 vector++;
2044
2045                 free_irq(adapter->msix_entries[vector].vector, netdev);
2046                 vector++;
2047
2048                 /* Other Causes interrupt vector */
2049                 free_irq(adapter->msix_entries[vector].vector, netdev);
2050                 return;
2051         }
2052
2053         free_irq(adapter->pdev->irq, netdev);
2054 }
2055
2056 /**
2057  * e1000_irq_disable - Mask off interrupt generation on the NIC
2058  **/
2059 static void e1000_irq_disable(struct e1000_adapter *adapter)
2060 {
2061         struct e1000_hw *hw = &adapter->hw;
2062
2063         ew32(IMC, ~0);
2064         if (adapter->msix_entries)
2065                 ew32(EIAC_82574, 0);
2066         e1e_flush();
2067
2068         if (adapter->msix_entries) {
2069                 int i;
2070                 for (i = 0; i < adapter->num_vectors; i++)
2071                         synchronize_irq(adapter->msix_entries[i].vector);
2072         } else {
2073                 synchronize_irq(adapter->pdev->irq);
2074         }
2075 }
2076
2077 /**
2078  * e1000_irq_enable - Enable default interrupt generation settings
2079  **/
2080 static void e1000_irq_enable(struct e1000_adapter *adapter)
2081 {
2082         struct e1000_hw *hw = &adapter->hw;
2083
2084         if (adapter->msix_entries) {
2085                 ew32(EIAC_82574, adapter->eiac_mask & E1000_EIAC_MASK_82574);
2086                 ew32(IMS, adapter->eiac_mask | E1000_IMS_OTHER | E1000_IMS_LSC);
2087         } else {
2088                 ew32(IMS, IMS_ENABLE_MASK);
2089         }
2090         e1e_flush();
2091 }
2092
2093 /**
2094  * e1000e_get_hw_control - get control of the h/w from f/w
2095  * @adapter: address of board private structure
2096  *
2097  * e1000e_get_hw_control sets {CTRL_EXT|SWSM}:DRV_LOAD bit.
2098  * For ASF and Pass Through versions of f/w this means that
2099  * the driver is loaded. For AMT version (only with 82573)
2100  * of the f/w this means that the network i/f is open.
2101  **/
2102 void e1000e_get_hw_control(struct e1000_adapter *adapter)
2103 {
2104         struct e1000_hw *hw = &adapter->hw;
2105         u32 ctrl_ext;
2106         u32 swsm;
2107
2108         /* Let firmware know the driver has taken over */
2109         if (adapter->flags & FLAG_HAS_SWSM_ON_LOAD) {
2110                 swsm = er32(SWSM);
2111                 ew32(SWSM, swsm | E1000_SWSM_DRV_LOAD);
2112         } else if (adapter->flags & FLAG_HAS_CTRLEXT_ON_LOAD) {
2113                 ctrl_ext = er32(CTRL_EXT);
2114                 ew32(CTRL_EXT, ctrl_ext | E1000_CTRL_EXT_DRV_LOAD);
2115         }
2116 }
2117
2118 /**
2119  * e1000e_release_hw_control - release control of the h/w to f/w
2120  * @adapter: address of board private structure
2121  *
2122  * e1000e_release_hw_control resets {CTRL_EXT|SWSM}:DRV_LOAD bit.
2123  * For ASF and Pass Through versions of f/w this means that the
2124  * driver is no longer loaded. For AMT version (only with 82573) i
2125  * of the f/w this means that the network i/f is closed.
2126  *
2127  **/
2128 void e1000e_release_hw_control(struct e1000_adapter *adapter)
2129 {
2130         struct e1000_hw *hw = &adapter->hw;
2131         u32 ctrl_ext;
2132         u32 swsm;
2133
2134         /* Let firmware taken over control of h/w */
2135         if (adapter->flags & FLAG_HAS_SWSM_ON_LOAD) {
2136                 swsm = er32(SWSM);
2137                 ew32(SWSM, swsm & ~E1000_SWSM_DRV_LOAD);
2138         } else if (adapter->flags & FLAG_HAS_CTRLEXT_ON_LOAD) {
2139                 ctrl_ext = er32(CTRL_EXT);
2140                 ew32(CTRL_EXT, ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD);
2141         }
2142 }
2143
2144 /**
2145  * @e1000_alloc_ring - allocate memory for a ring structure
2146  **/
2147 static int e1000_alloc_ring_dma(struct e1000_adapter *adapter,
2148                                 struct e1000_ring *ring)
2149 {
2150         struct pci_dev *pdev = adapter->pdev;
2151
2152         ring->desc = dma_alloc_coherent(&pdev->dev, ring->size, &ring->dma,
2153                                         GFP_KERNEL);
2154         if (!ring->desc)
2155                 return -ENOMEM;
2156
2157         return 0;
2158 }
2159
2160 /**
2161  * e1000e_setup_tx_resources - allocate Tx resources (Descriptors)
2162  * @adapter: board private structure
2163  *
2164  * Return 0 on success, negative on failure
2165  **/
2166 int e1000e_setup_tx_resources(struct e1000_adapter *adapter)
2167 {
2168         struct e1000_ring *tx_ring = adapter->tx_ring;
2169         int err = -ENOMEM, size;
2170
2171         size = sizeof(struct e1000_buffer) * tx_ring->count;
2172         tx_ring->buffer_info = vzalloc(size);
2173         if (!tx_ring->buffer_info)
2174                 goto err;
2175
2176         /* round up to nearest 4K */
2177         tx_ring->size = tx_ring->count * sizeof(struct e1000_tx_desc);
2178         tx_ring->size = ALIGN(tx_ring->size, 4096);
2179
2180         err = e1000_alloc_ring_dma(adapter, tx_ring);
2181         if (err)
2182                 goto err;
2183
2184         tx_ring->next_to_use = 0;
2185         tx_ring->next_to_clean = 0;
2186
2187         return 0;
2188 err:
2189         vfree(tx_ring->buffer_info);
2190         e_err("Unable to allocate memory for the transmit descriptor ring\n");
2191         return err;
2192 }
2193
2194 /**
2195  * e1000e_setup_rx_resources - allocate Rx resources (Descriptors)
2196  * @adapter: board private structure
2197  *
2198  * Returns 0 on success, negative on failure
2199  **/
2200 int e1000e_setup_rx_resources(struct e1000_adapter *adapter)
2201 {
2202         struct e1000_ring *rx_ring = adapter->rx_ring;
2203         struct e1000_buffer *buffer_info;
2204         int i, size, desc_len, err = -ENOMEM;
2205
2206         size = sizeof(struct e1000_buffer) * rx_ring->count;
2207         rx_ring->buffer_info = vzalloc(size);
2208         if (!rx_ring->buffer_info)
2209                 goto err;
2210
2211         for (i = 0; i < rx_ring->count; i++) {
2212                 buffer_info = &rx_ring->buffer_info[i];
2213                 buffer_info->ps_pages = kcalloc(PS_PAGE_BUFFERS,
2214                                                 sizeof(struct e1000_ps_page),
2215                                                 GFP_KERNEL);
2216                 if (!buffer_info->ps_pages)
2217                         goto err_pages;
2218         }
2219
2220         desc_len = sizeof(union e1000_rx_desc_packet_split);
2221
2222         /* Round up to nearest 4K */
2223         rx_ring->size = rx_ring->count * desc_len;
2224         rx_ring->size = ALIGN(rx_ring->size, 4096);
2225
2226         err = e1000_alloc_ring_dma(adapter, rx_ring);
2227         if (err)
2228                 goto err_pages;
2229
2230         rx_ring->next_to_clean = 0;
2231         rx_ring->next_to_use = 0;
2232         rx_ring->rx_skb_top = NULL;
2233
2234         return 0;
2235
2236 err_pages:
2237         for (i = 0; i < rx_ring->count; i++) {
2238                 buffer_info = &rx_ring->buffer_info[i];
2239                 kfree(buffer_info->ps_pages);
2240         }
2241 err:
2242         vfree(rx_ring->buffer_info);
2243         e_err("Unable to allocate memory for the receive descriptor ring\n");
2244         return err;
2245 }
2246
2247 /**
2248  * e1000_clean_tx_ring - Free Tx Buffers
2249  * @adapter: board private structure
2250  **/
2251 static void e1000_clean_tx_ring(struct e1000_adapter *adapter)
2252 {
2253         struct e1000_ring *tx_ring = adapter->tx_ring;
2254         struct e1000_buffer *buffer_info;
2255         unsigned long size;
2256         unsigned int i;
2257
2258         for (i = 0; i < tx_ring->count; i++) {
2259                 buffer_info = &tx_ring->buffer_info[i];
2260                 e1000_put_txbuf(adapter, buffer_info);
2261         }
2262
2263         size = sizeof(struct e1000_buffer) * tx_ring->count;
2264         memset(tx_ring->buffer_info, 0, size);
2265
2266         memset(tx_ring->desc, 0, tx_ring->size);
2267
2268         tx_ring->next_to_use = 0;
2269         tx_ring->next_to_clean = 0;
2270
2271         writel(0, adapter->hw.hw_addr + tx_ring->head);
2272         writel(0, adapter->hw.hw_addr + tx_ring->tail);
2273 }
2274
2275 /**
2276  * e1000e_free_tx_resources - Free Tx Resources per Queue
2277  * @adapter: board private structure
2278  *
2279  * Free all transmit software resources
2280  **/
2281 void e1000e_free_tx_resources(struct e1000_adapter *adapter)
2282 {
2283         struct pci_dev *pdev = adapter->pdev;
2284         struct e1000_ring *tx_ring = adapter->tx_ring;
2285
2286         e1000_clean_tx_ring(adapter);
2287
2288         vfree(tx_ring->buffer_info);
2289         tx_ring->buffer_info = NULL;
2290
2291         dma_free_coherent(&pdev->dev, tx_ring->size, tx_ring->desc,
2292                           tx_ring->dma);
2293         tx_ring->desc = NULL;
2294 }
2295
2296 /**
2297  * e1000e_free_rx_resources - Free Rx Resources
2298  * @adapter: board private structure
2299  *
2300  * Free all receive software resources
2301  **/
2302
2303 void e1000e_free_rx_resources(struct e1000_adapter *adapter)
2304 {
2305         struct pci_dev *pdev = adapter->pdev;
2306         struct e1000_ring *rx_ring = adapter->rx_ring;
2307         int i;
2308
2309         e1000_clean_rx_ring(adapter);
2310
2311         for (i = 0; i < rx_ring->count; i++)
2312                 kfree(rx_ring->buffer_info[i].ps_pages);
2313
2314         vfree(rx_ring->buffer_info);
2315         rx_ring->buffer_info = NULL;
2316
2317         dma_free_coherent(&pdev->dev, rx_ring->size, rx_ring->desc,
2318                           rx_ring->dma);
2319         rx_ring->desc = NULL;
2320 }
2321
2322 /**
2323  * e1000_update_itr - update the dynamic ITR value based on statistics
2324  * @adapter: pointer to adapter
2325  * @itr_setting: current adapter->itr
2326  * @packets: the number of packets during this measurement interval
2327  * @bytes: the number of bytes during this measurement interval
2328  *
2329  *      Stores a new ITR value based on packets and byte
2330  *      counts during the last interrupt.  The advantage of per interrupt
2331  *      computation is faster updates and more accurate ITR for the current
2332  *      traffic pattern.  Constants in this function were computed
2333  *      based on theoretical maximum wire speed and thresholds were set based
2334  *      on testing data as well as attempting to minimize response time
2335  *      while increasing bulk throughput.  This functionality is controlled
2336  *      by the InterruptThrottleRate module parameter.
2337  **/
2338 static unsigned int e1000_update_itr(struct e1000_adapter *adapter,
2339                                      u16 itr_setting, int packets,
2340                                      int bytes)
2341 {
2342         unsigned int retval = itr_setting;
2343
2344         if (packets == 0)
2345                 goto update_itr_done;
2346
2347         switch (itr_setting) {
2348         case lowest_latency:
2349                 /* handle TSO and jumbo frames */
2350                 if (bytes/packets > 8000)
2351                         retval = bulk_latency;
2352                 else if ((packets < 5) && (bytes > 512))
2353                         retval = low_latency;
2354                 break;
2355         case low_latency:  /* 50 usec aka 20000 ints/s */
2356                 if (bytes > 10000) {
2357                         /* this if handles the TSO accounting */
2358                         if (bytes/packets > 8000)
2359                                 retval = bulk_latency;
2360                         else if ((packets < 10) || ((bytes/packets) > 1200))
2361                                 retval = bulk_latency;
2362                         else if ((packets > 35))
2363                                 retval = lowest_latency;
2364                 } else if (bytes/packets > 2000) {
2365                         retval = bulk_latency;
2366                 } else if (packets <= 2 && bytes < 512) {
2367                         retval = lowest_latency;
2368                 }
2369                 break;
2370         case bulk_latency: /* 250 usec aka 4000 ints/s */
2371                 if (bytes > 25000) {
2372                         if (packets > 35)
2373                                 retval = low_latency;
2374                 } else if (bytes < 6000) {
2375                         retval = low_latency;
2376                 }
2377                 break;
2378         }
2379
2380 update_itr_done:
2381         return retval;
2382 }
2383
2384 static void e1000_set_itr(struct e1000_adapter *adapter)
2385 {
2386         struct e1000_hw *hw = &adapter->hw;
2387         u16 current_itr;
2388         u32 new_itr = adapter->itr;
2389
2390         /* for non-gigabit speeds, just fix the interrupt rate at 4000 */
2391         if (adapter->link_speed != SPEED_1000) {
2392                 current_itr = 0;
2393                 new_itr = 4000;
2394                 goto set_itr_now;
2395         }
2396
2397         if (adapter->flags2 & FLAG2_DISABLE_AIM) {
2398                 new_itr = 0;
2399                 goto set_itr_now;
2400         }
2401
2402         adapter->tx_itr = e1000_update_itr(adapter,
2403                                     adapter->tx_itr,
2404                                     adapter->total_tx_packets,
2405                                     adapter->total_tx_bytes);
2406         /* conservative mode (itr 3) eliminates the lowest_latency setting */
2407         if (adapter->itr_setting == 3 && adapter->tx_itr == lowest_latency)
2408                 adapter->tx_itr = low_latency;
2409
2410         adapter->rx_itr = e1000_update_itr(adapter,
2411                                     adapter->rx_itr,
2412                                     adapter->total_rx_packets,
2413                                     adapter->total_rx_bytes);
2414         /* conservative mode (itr 3) eliminates the lowest_latency setting */
2415         if (adapter->itr_setting == 3 && adapter->rx_itr == lowest_latency)
2416                 adapter->rx_itr = low_latency;
2417
2418         current_itr = max(adapter->rx_itr, adapter->tx_itr);
2419
2420         switch (current_itr) {
2421         /* counts and packets in update_itr are dependent on these numbers */
2422         case lowest_latency:
2423                 new_itr = 70000;
2424                 break;
2425         case low_latency:
2426                 new_itr = 20000; /* aka hwitr = ~200 */
2427                 break;
2428         case bulk_latency:
2429                 new_itr = 4000;
2430                 break;
2431         default:
2432                 break;
2433         }
2434
2435 set_itr_now:
2436         if (new_itr != adapter->itr) {
2437                 /*
2438                  * this attempts to bias the interrupt rate towards Bulk
2439                  * by adding intermediate steps when interrupt rate is
2440                  * increasing
2441                  */
2442                 new_itr = new_itr > adapter->itr ?
2443                              min(adapter->itr + (new_itr >> 2), new_itr) :
2444                              new_itr;
2445                 adapter->itr = new_itr;
2446                 adapter->rx_ring->itr_val = new_itr;
2447                 if (adapter->msix_entries)
2448                         adapter->rx_ring->set_itr = 1;
2449                 else
2450                         if (new_itr)
2451                                 ew32(ITR, 1000000000 / (new_itr * 256));
2452                         else
2453                                 ew32(ITR, 0);
2454         }
2455 }
2456
2457 /**
2458  * e1000_alloc_queues - Allocate memory for all rings
2459  * @adapter: board private structure to initialize
2460  **/
2461 static int __devinit e1000_alloc_queues(struct e1000_adapter *adapter)
2462 {
2463         adapter->tx_ring = kzalloc(sizeof(struct e1000_ring), GFP_KERNEL);
2464         if (!adapter->tx_ring)
2465                 goto err;
2466
2467         adapter->rx_ring = kzalloc(sizeof(struct e1000_ring), GFP_KERNEL);
2468         if (!adapter->rx_ring)
2469                 goto err;
2470
2471         return 0;
2472 err:
2473         e_err("Unable to allocate memory for queues\n");
2474         kfree(adapter->rx_ring);
2475         kfree(adapter->tx_ring);
2476         return -ENOMEM;
2477 }
2478
2479 /**
2480  * e1000_clean - NAPI Rx polling callback
2481  * @napi: struct associated with this polling callback
2482  * @budget: amount of packets driver is allowed to process this poll
2483  **/
2484 static int e1000_clean(struct napi_struct *napi, int budget)
2485 {
2486         struct e1000_adapter *adapter = container_of(napi, struct e1000_adapter, napi);
2487         struct e1000_hw *hw = &adapter->hw;
2488         struct net_device *poll_dev = adapter->netdev;
2489         int tx_cleaned = 1, work_done = 0;
2490
2491         adapter = netdev_priv(poll_dev);
2492
2493         if (adapter->msix_entries &&
2494             !(adapter->rx_ring->ims_val & adapter->tx_ring->ims_val))
2495                 goto clean_rx;
2496
2497         tx_cleaned = e1000_clean_tx_irq(adapter);
2498
2499 clean_rx:
2500         adapter->clean_rx(adapter, &work_done, budget);
2501
2502         if (!tx_cleaned)
2503                 work_done = budget;
2504
2505         /* If budget not fully consumed, exit the polling mode */
2506         if (work_done < budget) {
2507                 if (adapter->itr_setting & 3)
2508                         e1000_set_itr(adapter);
2509                 napi_complete(napi);
2510                 if (!test_bit(__E1000_DOWN, &adapter->state)) {
2511                         if (adapter->msix_entries)
2512                                 ew32(IMS, adapter->rx_ring->ims_val);
2513                         else
2514                                 e1000_irq_enable(adapter);
2515                 }
2516         }
2517
2518         return work_done;
2519 }
2520
2521 static void e1000_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
2522 {
2523         struct e1000_adapter *adapter = netdev_priv(netdev);
2524         struct e1000_hw *hw = &adapter->hw;
2525         u32 vfta, index;
2526
2527         /* don't update vlan cookie if already programmed */
2528         if ((adapter->hw.mng_cookie.status &
2529              E1000_MNG_DHCP_COOKIE_STATUS_VLAN) &&
2530             (vid == adapter->mng_vlan_id))
2531                 return;
2532
2533         /* add VID to filter table */
2534         if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) {
2535                 index = (vid >> 5) & 0x7F;
2536                 vfta = E1000_READ_REG_ARRAY(hw, E1000_VFTA, index);
2537                 vfta |= (1 << (vid & 0x1F));
2538                 hw->mac.ops.write_vfta(hw, index, vfta);
2539         }
2540
2541         set_bit(vid, adapter->active_vlans);
2542 }
2543
2544 static void e1000_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
2545 {
2546         struct e1000_adapter *adapter = netdev_priv(netdev);
2547         struct e1000_hw *hw = &adapter->hw;
2548         u32 vfta, index;
2549
2550         if ((adapter->hw.mng_cookie.status &
2551              E1000_MNG_DHCP_COOKIE_STATUS_VLAN) &&
2552             (vid == adapter->mng_vlan_id)) {
2553                 /* release control to f/w */
2554                 e1000e_release_hw_control(adapter);
2555                 return;
2556         }
2557
2558         /* remove VID from filter table */
2559         if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) {
2560                 index = (vid >> 5) & 0x7F;
2561                 vfta = E1000_READ_REG_ARRAY(hw, E1000_VFTA, index);
2562                 vfta &= ~(1 << (vid & 0x1F));
2563                 hw->mac.ops.write_vfta(hw, index, vfta);
2564         }
2565
2566         clear_bit(vid, adapter->active_vlans);
2567 }
2568
2569 /**
2570  * e1000e_vlan_filter_disable - helper to disable hw VLAN filtering
2571  * @adapter: board private structure to initialize
2572  **/
2573 static void e1000e_vlan_filter_disable(struct e1000_adapter *adapter)
2574 {
2575         struct net_device *netdev = adapter->netdev;
2576         struct e1000_hw *hw = &adapter->hw;
2577         u32 rctl;
2578
2579         if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) {
2580                 /* disable VLAN receive filtering */
2581                 rctl = er32(RCTL);
2582                 rctl &= ~(E1000_RCTL_VFE | E1000_RCTL_CFIEN);
2583                 ew32(RCTL, rctl);
2584
2585                 if (adapter->mng_vlan_id != (u16)E1000_MNG_VLAN_NONE) {
2586                         e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id);
2587                         adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
2588                 }
2589         }
2590 }
2591
2592 /**
2593  * e1000e_vlan_filter_enable - helper to enable HW VLAN filtering
2594  * @adapter: board private structure to initialize
2595  **/
2596 static void e1000e_vlan_filter_enable(struct e1000_adapter *adapter)
2597 {
2598         struct e1000_hw *hw = &adapter->hw;
2599         u32 rctl;
2600
2601         if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) {
2602                 /* enable VLAN receive filtering */
2603                 rctl = er32(RCTL);
2604                 rctl |= E1000_RCTL_VFE;
2605                 rctl &= ~E1000_RCTL_CFIEN;
2606                 ew32(RCTL, rctl);
2607         }
2608 }
2609
2610 /**
2611  * e1000e_vlan_strip_enable - helper to disable HW VLAN stripping
2612  * @adapter: board private structure to initialize
2613  **/
2614 static void e1000e_vlan_strip_disable(struct e1000_adapter *adapter)
2615 {
2616         struct e1000_hw *hw = &adapter->hw;
2617         u32 ctrl;
2618
2619         /* disable VLAN tag insert/strip */
2620         ctrl = er32(CTRL);
2621         ctrl &= ~E1000_CTRL_VME;
2622         ew32(CTRL, ctrl);
2623 }
2624
2625 /**
2626  * e1000e_vlan_strip_enable - helper to enable HW VLAN stripping
2627  * @adapter: board private structure to initialize
2628  **/
2629 static void e1000e_vlan_strip_enable(struct e1000_adapter *adapter)
2630 {
2631         struct e1000_hw *hw = &adapter->hw;
2632         u32 ctrl;
2633
2634         /* enable VLAN tag insert/strip */
2635         ctrl = er32(CTRL);
2636         ctrl |= E1000_CTRL_VME;
2637         ew32(CTRL, ctrl);
2638 }
2639
2640 static void e1000_update_mng_vlan(struct e1000_adapter *adapter)
2641 {
2642         struct net_device *netdev = adapter->netdev;
2643         u16 vid = adapter->hw.mng_cookie.vlan_id;
2644         u16 old_vid = adapter->mng_vlan_id;
2645
2646         if (adapter->hw.mng_cookie.status &
2647             E1000_MNG_DHCP_COOKIE_STATUS_VLAN) {
2648                 e1000_vlan_rx_add_vid(netdev, vid);
2649                 adapter->mng_vlan_id = vid;
2650         }
2651
2652         if ((old_vid != (u16)E1000_MNG_VLAN_NONE) && (vid != old_vid))
2653                 e1000_vlan_rx_kill_vid(netdev, old_vid);
2654 }
2655
2656 static void e1000_restore_vlan(struct e1000_adapter *adapter)
2657 {
2658         u16 vid;
2659
2660         e1000_vlan_rx_add_vid(adapter->netdev, 0);
2661
2662         for_each_set_bit(vid, adapter->active_vlans, VLAN_N_VID)
2663                 e1000_vlan_rx_add_vid(adapter->netdev, vid);
2664 }
2665
2666 static void e1000_init_manageability_pt(struct e1000_adapter *adapter)
2667 {
2668         struct e1000_hw *hw = &adapter->hw;
2669         u32 manc, manc2h, mdef, i, j;
2670
2671         if (!(adapter->flags & FLAG_MNG_PT_ENABLED))
2672                 return;
2673
2674         manc = er32(MANC);
2675
2676         /*
2677          * enable receiving management packets to the host. this will probably
2678          * generate destination unreachable messages from the host OS, but
2679          * the packets will be handled on SMBUS
2680          */
2681         manc |= E1000_MANC_EN_MNG2HOST;
2682         manc2h = er32(MANC2H);
2683
2684         switch (hw->mac.type) {
2685         default:
2686                 manc2h |= (E1000_MANC2H_PORT_623 | E1000_MANC2H_PORT_664);
2687                 break;
2688         case e1000_82574:
2689         case e1000_82583:
2690                 /*
2691                  * Check if IPMI pass-through decision filter already exists;
2692                  * if so, enable it.
2693                  */
2694                 for (i = 0, j = 0; i < 8; i++) {
2695                         mdef = er32(MDEF(i));
2696
2697                         /* Ignore filters with anything other than IPMI ports */
2698                         if (mdef & ~(E1000_MDEF_PORT_623 | E1000_MDEF_PORT_664))
2699                                 continue;
2700
2701                         /* Enable this decision filter in MANC2H */
2702                         if (mdef)
2703                                 manc2h |= (1 << i);
2704
2705                         j |= mdef;
2706                 }
2707
2708                 if (j == (E1000_MDEF_PORT_623 | E1000_MDEF_PORT_664))
2709                         break;
2710
2711                 /* Create new decision filter in an empty filter */
2712                 for (i = 0, j = 0; i < 8; i++)
2713                         if (er32(MDEF(i)) == 0) {
2714                                 ew32(MDEF(i), (E1000_MDEF_PORT_623 |
2715                                                E1000_MDEF_PORT_664));
2716                                 manc2h |= (1 << 1);
2717                                 j++;
2718                                 break;
2719                         }
2720
2721                 if (!j)
2722                         e_warn("Unable to create IPMI pass-through filter\n");
2723                 break;
2724         }
2725
2726         ew32(MANC2H, manc2h);
2727         ew32(MANC, manc);
2728 }
2729
2730 /**
2731  * e1000_configure_tx - Configure Transmit Unit after Reset
2732  * @adapter: board private structure
2733  *
2734  * Configure the Tx unit of the MAC after a reset.
2735  **/
2736 static void e1000_configure_tx(struct e1000_adapter *adapter)
2737 {
2738         struct e1000_hw *hw = &adapter->hw;
2739         struct e1000_ring *tx_ring = adapter->tx_ring;
2740         u64 tdba;
2741         u32 tdlen, tctl, tipg, tarc;
2742         u32 ipgr1, ipgr2;
2743
2744         /* Setup the HW Tx Head and Tail descriptor pointers */
2745         tdba = tx_ring->dma;
2746         tdlen = tx_ring->count * sizeof(struct e1000_tx_desc);
2747         ew32(TDBAL, (tdba & DMA_BIT_MASK(32)));
2748         ew32(TDBAH, (tdba >> 32));
2749         ew32(TDLEN, tdlen);
2750         ew32(TDH, 0);
2751         ew32(TDT, 0);
2752         tx_ring->head = E1000_TDH;
2753         tx_ring->tail = E1000_TDT;
2754
2755         /* Set the default values for the Tx Inter Packet Gap timer */
2756         tipg = DEFAULT_82543_TIPG_IPGT_COPPER;          /*  8  */
2757         ipgr1 = DEFAULT_82543_TIPG_IPGR1;               /*  8  */
2758         ipgr2 = DEFAULT_82543_TIPG_IPGR2;               /*  6  */
2759
2760         if (adapter->flags & FLAG_TIPG_MEDIUM_FOR_80003ESLAN)
2761                 ipgr2 = DEFAULT_80003ES2LAN_TIPG_IPGR2; /*  7  */
2762
2763         tipg |= ipgr1 << E1000_TIPG_IPGR1_SHIFT;
2764         tipg |= ipgr2 << E1000_TIPG_IPGR2_SHIFT;
2765         ew32(TIPG, tipg);
2766
2767         /* Set the Tx Interrupt Delay register */
2768         ew32(TIDV, adapter->tx_int_delay);
2769         /* Tx irq moderation */
2770         ew32(TADV, adapter->tx_abs_int_delay);
2771
2772         if (adapter->flags2 & FLAG2_DMA_BURST) {
2773                 u32 txdctl = er32(TXDCTL(0));
2774                 txdctl &= ~(E1000_TXDCTL_PTHRESH | E1000_TXDCTL_HTHRESH |
2775                             E1000_TXDCTL_WTHRESH);
2776                 /*
2777                  * set up some performance related parameters to encourage the
2778                  * hardware to use the bus more efficiently in bursts, depends
2779                  * on the tx_int_delay to be enabled,
2780                  * wthresh = 5 ==> burst write a cacheline (64 bytes) at a time
2781                  * hthresh = 1 ==> prefetch when one or more available
2782                  * pthresh = 0x1f ==> prefetch if internal cache 31 or less
2783                  * BEWARE: this seems to work but should be considered first if
2784                  * there are Tx hangs or other Tx related bugs
2785                  */
2786                 txdctl |= E1000_TXDCTL_DMA_BURST_ENABLE;
2787                 ew32(TXDCTL(0), txdctl);
2788                 /* erratum work around: set txdctl the same for both queues */
2789                 ew32(TXDCTL(1), txdctl);
2790         }
2791
2792         /* Program the Transmit Control Register */
2793         tctl = er32(TCTL);
2794         tctl &= ~E1000_TCTL_CT;
2795         tctl |= E1000_TCTL_PSP | E1000_TCTL_RTLC |
2796                 (E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT);
2797
2798         if (adapter->flags & FLAG_TARC_SPEED_MODE_BIT) {
2799                 tarc = er32(TARC(0));
2800                 /*
2801                  * set the speed mode bit, we'll clear it if we're not at
2802                  * gigabit link later
2803                  */
2804 #define SPEED_MODE_BIT (1 << 21)
2805                 tarc |= SPEED_MODE_BIT;
2806                 ew32(TARC(0), tarc);
2807         }
2808
2809         /* errata: program both queues to unweighted RR */
2810         if (adapter->flags & FLAG_TARC_SET_BIT_ZERO) {
2811                 tarc = er32(TARC(0));
2812                 tarc |= 1;
2813                 ew32(TARC(0), tarc);
2814                 tarc = er32(TARC(1));
2815                 tarc |= 1;
2816                 ew32(TARC(1), tarc);
2817         }
2818
2819         /* Setup Transmit Descriptor Settings for eop descriptor */
2820         adapter->txd_cmd = E1000_TXD_CMD_EOP | E1000_TXD_CMD_IFCS;
2821
2822         /* only set IDE if we are delaying interrupts using the timers */
2823         if (adapter->tx_int_delay)
2824                 adapter->txd_cmd |= E1000_TXD_CMD_IDE;
2825
2826         /* enable Report Status bit */
2827         adapter->txd_cmd |= E1000_TXD_CMD_RS;
2828
2829         ew32(TCTL, tctl);
2830
2831         e1000e_config_collision_dist(hw);
2832 }
2833
2834 /**
2835  * e1000_setup_rctl - configure the receive control registers
2836  * @adapter: Board private structure
2837  **/
2838 #define PAGE_USE_COUNT(S) (((S) >> PAGE_SHIFT) + \
2839                            (((S) & (PAGE_SIZE - 1)) ? 1 : 0))
2840 static void e1000_setup_rctl(struct e1000_adapter *adapter)
2841 {
2842         struct e1000_hw *hw = &adapter->hw;
2843         u32 rctl, rfctl;
2844         u32 pages = 0;
2845
2846         /* Workaround Si errata on 82579 - configure jumbo frame flow */
2847         if (hw->mac.type == e1000_pch2lan) {
2848                 s32 ret_val;
2849
2850                 if (adapter->netdev->mtu > ETH_DATA_LEN)
2851                         ret_val = e1000_lv_jumbo_workaround_ich8lan(hw, true);
2852                 else
2853                         ret_val = e1000_lv_jumbo_workaround_ich8lan(hw, false);
2854
2855                 if (ret_val)
2856                         e_dbg("failed to enable jumbo frame workaround mode\n");
2857         }
2858
2859         /* Program MC offset vector base */
2860         rctl = er32(RCTL);
2861         rctl &= ~(3 << E1000_RCTL_MO_SHIFT);
2862         rctl |= E1000_RCTL_EN | E1000_RCTL_BAM |
2863                 E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF |
2864                 (adapter->hw.mac.mc_filter_type << E1000_RCTL_MO_SHIFT);
2865
2866         /* Do not Store bad packets */
2867         rctl &= ~E1000_RCTL_SBP;
2868
2869         /* Enable Long Packet receive */
2870         if (adapter->netdev->mtu <= ETH_DATA_LEN)
2871                 rctl &= ~E1000_RCTL_LPE;
2872         else
2873                 rctl |= E1000_RCTL_LPE;
2874
2875         /* Some systems expect that the CRC is included in SMBUS traffic. The
2876          * hardware strips the CRC before sending to both SMBUS (BMC) and to
2877          * host memory when this is enabled
2878          */
2879         if (adapter->flags2 & FLAG2_CRC_STRIPPING)
2880                 rctl |= E1000_RCTL_SECRC;
2881
2882         /* Workaround Si errata on 82577 PHY - configure IPG for jumbos */
2883         if ((hw->phy.type == e1000_phy_82577) && (rctl & E1000_RCTL_LPE)) {
2884                 u16 phy_data;
2885
2886                 e1e_rphy(hw, PHY_REG(770, 26), &phy_data);
2887                 phy_data &= 0xfff8;
2888                 phy_data |= (1 << 2);
2889                 e1e_wphy(hw, PHY_REG(770, 26), phy_data);
2890
2891                 e1e_rphy(hw, 22, &phy_data);
2892                 phy_data &= 0x0fff;
2893                 phy_data |= (1 << 14);
2894                 e1e_wphy(hw, 0x10, 0x2823);
2895                 e1e_wphy(hw, 0x11, 0x0003);
2896                 e1e_wphy(hw, 22, phy_data);
2897         }
2898
2899         /* Setup buffer sizes */
2900         rctl &= ~E1000_RCTL_SZ_4096;
2901         rctl |= E1000_RCTL_BSEX;
2902         switch (adapter->rx_buffer_len) {
2903         case 2048:
2904         default:
2905                 rctl |= E1000_RCTL_SZ_2048;
2906                 rctl &= ~E1000_RCTL_BSEX;
2907                 break;
2908         case 4096:
2909                 rctl |= E1000_RCTL_SZ_4096;
2910                 break;
2911         case 8192:
2912                 rctl |= E1000_RCTL_SZ_8192;
2913                 break;
2914         case 16384:
2915                 rctl |= E1000_RCTL_SZ_16384;
2916                 break;
2917         }
2918
2919         /* Enable Extended Status in all Receive Descriptors */
2920         rfctl = er32(RFCTL);
2921         rfctl |= E1000_RFCTL_EXTEN;
2922
2923         /*
2924          * 82571 and greater support packet-split where the protocol
2925          * header is placed in skb->data and the packet data is
2926          * placed in pages hanging off of skb_shinfo(skb)->nr_frags.
2927          * In the case of a non-split, skb->data is linearly filled,
2928          * followed by the page buffers.  Therefore, skb->data is
2929          * sized to hold the largest protocol header.
2930          *
2931          * allocations using alloc_page take too long for regular MTU
2932          * so only enable packet split for jumbo frames
2933          *
2934          * Using pages when the page size is greater than 16k wastes
2935          * a lot of memory, since we allocate 3 pages at all times
2936          * per packet.
2937          */
2938         pages = PAGE_USE_COUNT(adapter->netdev->mtu);
2939         if (!(adapter->flags & FLAG_HAS_ERT) && (pages <= 3) &&
2940             (PAGE_SIZE <= 16384) && (rctl & E1000_RCTL_LPE))
2941                 adapter->rx_ps_pages = pages;
2942         else
2943                 adapter->rx_ps_pages = 0;
2944
2945         if (adapter->rx_ps_pages) {
2946                 u32 psrctl = 0;
2947
2948                 /*
2949                  * disable packet split support for IPv6 extension headers,
2950                  * because some malformed IPv6 headers can hang the Rx
2951                  */
2952                 rfctl |= (E1000_RFCTL_IPV6_EX_DIS |
2953                           E1000_RFCTL_NEW_IPV6_EXT_DIS);
2954
2955                 /* Enable Packet split descriptors */
2956                 rctl |= E1000_RCTL_DTYP_PS;
2957
2958                 psrctl |= adapter->rx_ps_bsize0 >>
2959                         E1000_PSRCTL_BSIZE0_SHIFT;
2960
2961                 switch (adapter->rx_ps_pages) {
2962                 case 3:
2963                         psrctl |= PAGE_SIZE <<
2964                                 E1000_PSRCTL_BSIZE3_SHIFT;
2965                 case 2:
2966                         psrctl |= PAGE_SIZE <<
2967                                 E1000_PSRCTL_BSIZE2_SHIFT;
2968                 case 1:
2969                         psrctl |= PAGE_SIZE >>
2970                                 E1000_PSRCTL_BSIZE1_SHIFT;
2971                         break;
2972                 }
2973
2974                 ew32(PSRCTL, psrctl);
2975         }
2976
2977         ew32(RFCTL, rfctl);
2978         ew32(RCTL, rctl);
2979         /* just started the receive unit, no need to restart */
2980         adapter->flags &= ~FLAG_RX_RESTART_NOW;
2981 }
2982
2983 /**
2984  * e1000_configure_rx - Configure Receive Unit after Reset
2985  * @adapter: board private structure
2986  *
2987  * Configure the Rx unit of the MAC after a reset.
2988  **/
2989 static void e1000_configure_rx(struct e1000_adapter *adapter)
2990 {
2991         struct e1000_hw *hw = &adapter->hw;
2992         struct e1000_ring *rx_ring = adapter->rx_ring;
2993         u64 rdba;
2994         u32 rdlen, rctl, rxcsum, ctrl_ext;
2995
2996         if (adapter->rx_ps_pages) {
2997                 /* this is a 32 byte descriptor */
2998                 rdlen = rx_ring->count *
2999                     sizeof(union e1000_rx_desc_packet_split);
3000                 adapter->clean_rx = e1000_clean_rx_irq_ps;
3001                 adapter->alloc_rx_buf = e1000_alloc_rx_buffers_ps;
3002         } else if (adapter->netdev->mtu > ETH_FRAME_LEN + ETH_FCS_LEN) {
3003                 rdlen = rx_ring->count * sizeof(union e1000_rx_desc_extended);
3004                 adapter->clean_rx = e1000_clean_jumbo_rx_irq;
3005                 adapter->alloc_rx_buf = e1000_alloc_jumbo_rx_buffers;
3006         } else {
3007                 rdlen = rx_ring->count * sizeof(union e1000_rx_desc_extended);
3008                 adapter->clean_rx = e1000_clean_rx_irq;
3009                 adapter->alloc_rx_buf = e1000_alloc_rx_buffers;
3010         }
3011
3012         /* disable receives while setting up the descriptors */
3013         rctl = er32(RCTL);
3014         if (!(adapter->flags2 & FLAG2_NO_DISABLE_RX))
3015                 ew32(RCTL, rctl & ~E1000_RCTL_EN);
3016         e1e_flush();
3017         usleep_range(10000, 20000);
3018
3019         if (adapter->flags2 & FLAG2_DMA_BURST) {
3020                 /*
3021                  * set the writeback threshold (only takes effect if the RDTR
3022                  * is set). set GRAN=1 and write back up to 0x4 worth, and
3023                  * enable prefetching of 0x20 Rx descriptors
3024                  * granularity = 01
3025                  * wthresh = 04,
3026                  * hthresh = 04,
3027                  * pthresh = 0x20
3028                  */
3029                 ew32(RXDCTL(0), E1000_RXDCTL_DMA_BURST_ENABLE);
3030                 ew32(RXDCTL(1), E1000_RXDCTL_DMA_BURST_ENABLE);
3031
3032                 /*
3033                  * override the delay timers for enabling bursting, only if
3034                  * the value was not set by the user via module options
3035                  */
3036                 if (adapter->rx_int_delay == DEFAULT_RDTR)
3037                         adapter->rx_int_delay = BURST_RDTR;
3038                 if (adapter->rx_abs_int_delay == DEFAULT_RADV)
3039                         adapter->rx_abs_int_delay = BURST_RADV;
3040         }
3041
3042         /* set the Receive Delay Timer Register */
3043         ew32(RDTR, adapter->rx_int_delay);
3044
3045         /* irq moderation */
3046         ew32(RADV, adapter->rx_abs_int_delay);
3047         if ((adapter->itr_setting != 0) && (adapter->itr != 0))
3048                 ew32(ITR, 1000000000 / (adapter->itr * 256));
3049
3050         ctrl_ext = er32(CTRL_EXT);
3051         /* Auto-Mask interrupts upon ICR access */
3052         ctrl_ext |= E1000_CTRL_EXT_IAME;
3053         ew32(IAM, 0xffffffff);
3054         ew32(CTRL_EXT, ctrl_ext);
3055         e1e_flush();
3056
3057         /*
3058          * Setup the HW Rx Head and Tail Descriptor Pointers and
3059          * the Base and Length of the Rx Descriptor Ring
3060          */
3061         rdba = rx_ring->dma;
3062         ew32(RDBAL, (rdba & DMA_BIT_MASK(32)));
3063         ew32(RDBAH, (rdba >> 32));
3064         ew32(RDLEN, rdlen);
3065         ew32(RDH, 0);
3066         ew32(RDT, 0);
3067         rx_ring->head = E1000_RDH;
3068         rx_ring->tail = E1000_RDT;
3069
3070         /* Enable Receive Checksum Offload for TCP and UDP */
3071         rxcsum = er32(RXCSUM);
3072         if (adapter->netdev->features & NETIF_F_RXCSUM) {
3073                 rxcsum |= E1000_RXCSUM_TUOFL;
3074
3075                 /*
3076                  * IPv4 payload checksum for UDP fragments must be
3077                  * used in conjunction with packet-split.
3078                  */
3079                 if (adapter->rx_ps_pages)
3080                         rxcsum |= E1000_RXCSUM_IPPCSE;
3081         } else {
3082                 rxcsum &= ~E1000_RXCSUM_TUOFL;
3083                 /* no need to clear IPPCSE as it defaults to 0 */
3084         }
3085         ew32(RXCSUM, rxcsum);
3086
3087         /*
3088          * Enable early receives on supported devices, only takes effect when
3089          * packet size is equal or larger than the specified value (in 8 byte
3090          * units), e.g. using jumbo frames when setting to E1000_ERT_2048
3091          */
3092         if ((adapter->flags & FLAG_HAS_ERT) ||
3093             (adapter->hw.mac.type == e1000_pch2lan)) {
3094                 if (adapter->netdev->mtu > ETH_DATA_LEN) {
3095                         u32 rxdctl = er32(RXDCTL(0));
3096                         ew32(RXDCTL(0), rxdctl | 0x3);
3097                         if (adapter->flags & FLAG_HAS_ERT)
3098                                 ew32(ERT, E1000_ERT_2048 | (1 << 13));
3099                         /*
3100                          * With jumbo frames and early-receive enabled,
3101                          * excessive C-state transition latencies result in
3102                          * dropped transactions.
3103                          */
3104                         pm_qos_update_request(&adapter->netdev->pm_qos_req, 55);
3105                 } else {
3106                         pm_qos_update_request(&adapter->netdev->pm_qos_req,
3107                                               PM_QOS_DEFAULT_VALUE);
3108                 }
3109         }
3110
3111         /* Enable Receives */
3112         ew32(RCTL, rctl);
3113 }
3114
3115 /**
3116  *  e1000_update_mc_addr_list - Update Multicast addresses
3117  *  @hw: pointer to the HW structure
3118  *  @mc_addr_list: array of multicast addresses to program
3119  *  @mc_addr_count: number of multicast addresses to program
3120  *
3121  *  Updates the Multicast Table Array.
3122  *  The caller must have a packed mc_addr_list of multicast addresses.
3123  **/
3124 static void e1000_update_mc_addr_list(struct e1000_hw *hw, u8 *mc_addr_list,
3125                                       u32 mc_addr_count)
3126 {
3127         hw->mac.ops.update_mc_addr_list(hw, mc_addr_list, mc_addr_count);
3128 }
3129
3130 /**
3131  * e1000_set_multi - Multicast and Promiscuous mode set
3132  * @netdev: network interface device structure
3133  *
3134  * The set_multi entry point is called whenever the multicast address
3135  * list or the network interface flags are updated.  This routine is
3136  * responsible for configuring the hardware for proper multicast,
3137  * promiscuous mode, and all-multi behavior.
3138  **/
3139 static void e1000_set_multi(struct net_device *netdev)
3140 {
3141         struct e1000_adapter *adapter = netdev_priv(netdev);
3142         struct e1000_hw *hw = &adapter->hw;
3143         struct netdev_hw_addr *ha;
3144         u8  *mta_list;
3145         u32 rctl;
3146
3147         /* Check for Promiscuous and All Multicast modes */
3148
3149         rctl = er32(RCTL);
3150
3151         if (netdev->flags & IFF_PROMISC) {
3152                 rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE);
3153                 rctl &= ~E1000_RCTL_VFE;
3154                 /* Do not hardware filter VLANs in promisc mode */
3155                 e1000e_vlan_filter_disable(adapter);
3156         } else {
3157                 if (netdev->flags & IFF_ALLMULTI) {
3158                         rctl |= E1000_RCTL_MPE;
3159                         rctl &= ~E1000_RCTL_UPE;
3160                 } else {
3161                         rctl &= ~(E1000_RCTL_UPE | E1000_RCTL_MPE);
3162                 }
3163                 e1000e_vlan_filter_enable(adapter);
3164         }
3165
3166         ew32(RCTL, rctl);
3167
3168         if (!netdev_mc_empty(netdev)) {
3169                 int i = 0;
3170
3171                 mta_list = kmalloc(netdev_mc_count(netdev) * 6, GFP_ATOMIC);
3172                 if (!mta_list)
3173                         return;
3174
3175                 /* prepare a packed array of only addresses. */
3176                 netdev_for_each_mc_addr(ha, netdev)
3177                         memcpy(mta_list + (i++ * ETH_ALEN), ha->addr, ETH_ALEN);
3178
3179                 e1000_update_mc_addr_list(hw, mta_list, i);
3180                 kfree(mta_list);
3181         } else {
3182                 /*
3183                  * if we're called from probe, we might not have
3184                  * anything to do here, so clear out the list
3185                  */
3186                 e1000_update_mc_addr_list(hw, NULL, 0);
3187         }
3188
3189         if (netdev->features & NETIF_F_HW_VLAN_RX)
3190                 e1000e_vlan_strip_enable(adapter);
3191         else
3192                 e1000e_vlan_strip_disable(adapter);
3193 }
3194
3195 /**
3196  * e1000_configure - configure the hardware for Rx and Tx
3197  * @adapter: private board structure
3198  **/
3199 static void e1000_configure(struct e1000_adapter *adapter)
3200 {
3201         e1000_set_multi(adapter->netdev);
3202
3203         e1000_restore_vlan(adapter);
3204         e1000_init_manageability_pt(adapter);
3205
3206         e1000_configure_tx(adapter);
3207         e1000_setup_rctl(adapter);
3208         e1000_configure_rx(adapter);
3209         adapter->alloc_rx_buf(adapter, e1000_desc_unused(adapter->rx_ring),
3210                               GFP_KERNEL);
3211 }
3212
3213 /**
3214  * e1000e_power_up_phy - restore link in case the phy was powered down
3215  * @adapter: address of board private structure
3216  *
3217  * The phy may be powered down to save power and turn off link when the
3218  * driver is unloaded and wake on lan is not enabled (among others)
3219  * *** this routine MUST be followed by a call to e1000e_reset ***
3220  **/
3221 void e1000e_power_up_phy(struct e1000_adapter *adapter)
3222 {
3223         if (adapter->hw.phy.ops.power_up)
3224                 adapter->hw.phy.ops.power_up(&adapter->hw);
3225
3226         adapter->hw.mac.ops.setup_link(&adapter->hw);
3227 }
3228
3229 /**
3230  * e1000_power_down_phy - Power down the PHY
3231  *
3232  * Power down the PHY so no link is implied when interface is down.
3233  * The PHY cannot be powered down if management or WoL is active.
3234  */
3235 static void e1000_power_down_phy(struct e1000_adapter *adapter)
3236 {
3237         /* WoL is enabled */
3238         if (adapter->wol)
3239                 return;
3240
3241         if (adapter->hw.phy.ops.power_down)
3242                 adapter->hw.phy.ops.power_down(&adapter->hw);
3243 }
3244
3245 /**
3246  * e1000e_reset - bring the hardware into a known good state
3247  *
3248  * This function boots the hardware and enables some settings that
3249  * require a configuration cycle of the hardware - those cannot be
3250  * set/changed during runtime. After reset the device needs to be
3251  * properly configured for Rx, Tx etc.
3252  */
3253 void e1000e_reset(struct e1000_adapter *adapter)
3254 {
3255         struct e1000_mac_info *mac = &adapter->hw.mac;
3256         struct e1000_fc_info *fc = &adapter->hw.fc;
3257         struct e1000_hw *hw = &adapter->hw;
3258         u32 tx_space, min_tx_space, min_rx_space;
3259         u32 pba = adapter->pba;
3260         u16 hwm;
3261
3262         /* reset Packet Buffer Allocation to default */
3263         ew32(PBA, pba);
3264
3265         if (adapter->max_frame_size > ETH_FRAME_LEN + ETH_FCS_LEN) {
3266                 /*
3267                  * To maintain wire speed transmits, the Tx FIFO should be
3268                  * large enough to accommodate two full transmit packets,
3269                  * rounded up to the next 1KB and expressed in KB.  Likewise,
3270                  * the Rx FIFO should be large enough to accommodate at least
3271                  * one full receive packet and is similarly rounded up and
3272                  * expressed in KB.
3273                  */
3274                 pba = er32(PBA);
3275                 /* upper 16 bits has Tx packet buffer allocation size in KB */
3276                 tx_space = pba >> 16;
3277                 /* lower 16 bits has Rx packet buffer allocation size in KB */
3278                 pba &= 0xffff;
3279                 /*
3280                  * the Tx fifo also stores 16 bytes of information about the Tx
3281                  * but don't include ethernet FCS because hardware appends it
3282                  */
3283                 min_tx_space = (adapter->max_frame_size +
3284                                 sizeof(struct e1000_tx_desc) -
3285                                 ETH_FCS_LEN) * 2;
3286                 min_tx_space = ALIGN(min_tx_space, 1024);
3287                 min_tx_space >>= 10;
3288                 /* software strips receive CRC, so leave room for it */
3289                 min_rx_space = adapter->max_frame_size;
3290                 min_rx_space = ALIGN(min_rx_space, 1024);
3291                 min_rx_space >>= 10;
3292
3293                 /*
3294                  * If current Tx allocation is less than the min Tx FIFO size,
3295                  * and the min Tx FIFO size is less than the current Rx FIFO
3296                  * allocation, take space away from current Rx allocation
3297                  */
3298                 if ((tx_space < min_tx_space) &&
3299                     ((min_tx_space - tx_space) < pba)) {
3300                         pba -= min_tx_space - tx_space;
3301
3302                         /*
3303                          * if short on Rx space, Rx wins and must trump Tx
3304                          * adjustment or use Early Receive if available
3305                          */
3306                         if ((pba < min_rx_space) &&
3307                             (!(adapter->flags & FLAG_HAS_ERT)))
3308                                 /* ERT enabled in e1000_configure_rx */
3309                                 pba = min_rx_space;
3310                 }
3311
3312                 ew32(PBA, pba);
3313         }
3314
3315         /*
3316          * flow control settings
3317          *
3318          * The high water mark must be low enough to fit one full frame
3319          * (or the size used for early receive) above it in the Rx FIFO.
3320          * Set it to the lower of:
3321          * - 90% of the Rx FIFO size, and
3322          * - the full Rx FIFO size minus the early receive size (for parts
3323          *   with ERT support assuming ERT set to E1000_ERT_2048), or
3324          * - the full Rx FIFO size minus one full frame
3325          */
3326         if (adapter->flags & FLAG_DISABLE_FC_PAUSE_TIME)
3327                 fc->pause_time = 0xFFFF;
3328         else
3329                 fc->pause_time = E1000_FC_PAUSE_TIME;
3330         fc->send_xon = 1;
3331         fc->current_mode = fc->requested_mode;
3332
3333         switch (hw->mac.type) {
3334         default:
3335                 if ((adapter->flags & FLAG_HAS_ERT) &&
3336                     (adapter->netdev->mtu > ETH_DATA_LEN))
3337                         hwm = min(((pba << 10) * 9 / 10),
3338                                   ((pba << 10) - (E1000_ERT_2048 << 3)));
3339                 else
3340                         hwm = min(((pba << 10) * 9 / 10),
3341                                   ((pba << 10) - adapter->max_frame_size));
3342
3343                 fc->high_water = hwm & E1000_FCRTH_RTH; /* 8-byte granularity */
3344                 fc->low_water = fc->high_water - 8;
3345                 break;
3346         case e1000_pchlan:
3347                 /*
3348                  * Workaround PCH LOM adapter hangs with certain network
3349                  * loads.  If hangs persist, try disabling Tx flow control.
3350                  */
3351                 if (adapter->netdev->mtu > ETH_DATA_LEN) {
3352                         fc->high_water = 0x3500;
3353                         fc->low_water  = 0x1500;
3354                 } else {
3355                         fc->high_water = 0x5000;
3356                         fc->low_water  = 0x3000;
3357                 }
3358                 fc->refresh_time = 0x1000;
3359                 break;
3360         case e1000_pch2lan:
3361                 fc->high_water = 0x05C20;
3362                 fc->low_water = 0x05048;
3363                 fc->pause_time = 0x0650;
3364                 fc->refresh_time = 0x0400;
3365                 if (adapter->netdev->mtu > ETH_DATA_LEN) {
3366                         pba = 14;
3367                         ew32(PBA, pba);
3368                 }
3369                 break;
3370         }
3371
3372         /*
3373          * Disable Adaptive Interrupt Moderation if 2 full packets cannot
3374          * fit in receive buffer and early-receive not supported.
3375          */
3376         if (adapter->itr_setting & 0x3) {
3377                 if (((adapter->max_frame_size * 2) > (pba << 10)) &&
3378                     !(adapter->flags & FLAG_HAS_ERT)) {
3379                         if (!(adapter->flags2 & FLAG2_DISABLE_AIM)) {
3380                                 dev_info(&adapter->pdev->dev,
3381                                         "Interrupt Throttle Rate turned off\n");
3382                                 adapter->flags2 |= FLAG2_DISABLE_AIM;
3383                                 ew32(ITR, 0);
3384                         }
3385                 } else if (adapter->flags2 & FLAG2_DISABLE_AIM) {
3386                         dev_info(&adapter->pdev->dev,
3387                                  "Interrupt Throttle Rate turned on\n");
3388                         adapter->flags2 &= ~FLAG2_DISABLE_AIM;
3389                         adapter->itr = 20000;
3390                         ew32(ITR, 1000000000 / (adapter->itr * 256));
3391                 }
3392         }
3393
3394         /* Allow time for pending master requests to run */
3395         mac->ops.reset_hw(hw);
3396
3397         /*
3398          * For parts with AMT enabled, let the firmware know
3399          * that the network interface is in control
3400          */
3401         if (adapter->flags & FLAG_HAS_AMT)
3402                 e1000e_get_hw_control(adapter);
3403
3404         ew32(WUC, 0);
3405
3406         if (mac->ops.init_hw(hw))
3407                 e_err("Hardware Error\n");
3408
3409         e1000_update_mng_vlan(adapter);
3410
3411         /* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */
3412         ew32(VET, ETH_P_8021Q);
3413
3414         e1000e_reset_adaptive(hw);
3415
3416         if (!netif_running(adapter->netdev) &&
3417             !test_bit(__E1000_TESTING, &adapter->state)) {
3418                 e1000_power_down_phy(adapter);
3419                 return;
3420         }
3421
3422         e1000_get_phy_info(hw);
3423
3424         if ((adapter->flags & FLAG_HAS_SMART_POWER_DOWN) &&
3425             !(adapter->flags & FLAG_SMART_POWER_DOWN)) {
3426                 u16 phy_data = 0;
3427                 /*
3428                  * speed up time to link by disabling smart power down, ignore
3429                  * the return value of this function because there is nothing
3430                  * different we would do if it failed
3431                  */
3432                 e1e_rphy(hw, IGP02E1000_PHY_POWER_MGMT, &phy_data);
3433                 phy_data &= ~IGP02E1000_PM_SPD;
3434                 e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT, phy_data);
3435         }
3436 }
3437
3438 int e1000e_up(struct e1000_adapter *adapter)
3439 {
3440         struct e1000_hw *hw = &adapter->hw;
3441
3442         /* hardware has been reset, we need to reload some things */
3443         e1000_configure(adapter);
3444
3445         clear_bit(__E1000_DOWN, &adapter->state);
3446
3447         napi_enable(&adapter->napi);
3448         if (adapter->msix_entries)
3449                 e1000_configure_msix(adapter);
3450         e1000_irq_enable(adapter);
3451
3452         netif_start_queue(adapter->netdev);
3453
3454         /* fire a link change interrupt to start the watchdog */
3455         if (adapter->msix_entries)
3456                 ew32(ICS, E1000_ICS_LSC | E1000_ICR_OTHER);
3457         else
3458                 ew32(ICS, E1000_ICS_LSC);
3459
3460         return 0;
3461 }
3462
3463 static void e1000e_flush_descriptors(struct e1000_adapter *adapter)
3464 {
3465         struct e1000_hw *hw = &adapter->hw;
3466
3467         if (!(adapter->flags2 & FLAG2_DMA_BURST))
3468                 return;
3469
3470         /* flush pending descriptor writebacks to memory */
3471         ew32(TIDV, adapter->tx_int_delay | E1000_TIDV_FPD);
3472         ew32(RDTR, adapter->rx_int_delay | E1000_RDTR_FPD);
3473
3474         /* execute the writes immediately */
3475         e1e_flush();
3476 }
3477
3478 static void e1000e_update_stats(struct e1000_adapter *adapter);
3479
3480 void e1000e_down(struct e1000_adapter *adapter)
3481 {
3482         struct net_device *netdev = adapter->netdev;
3483         struct e1000_hw *hw = &adapter->hw;
3484         u32 tctl, rctl;
3485
3486         /*
3487          * signal that we're down so the interrupt handler does not
3488          * reschedule our watchdog timer
3489          */
3490         set_bit(__E1000_DOWN, &adapter->state);
3491
3492         /* disable receives in the hardware */
3493         rctl = er32(RCTL);
3494         if (!(adapter->flags2 & FLAG2_NO_DISABLE_RX))
3495                 ew32(RCTL, rctl & ~E1000_RCTL_EN);
3496         /* flush and sleep below */
3497
3498         netif_stop_queue(netdev);
3499
3500         /* disable transmits in the hardware */
3501         tctl = er32(TCTL);
3502         tctl &= ~E1000_TCTL_EN;
3503         ew32(TCTL, tctl);
3504
3505         /* flush both disables and wait for them to finish */
3506         e1e_flush();
3507         usleep_range(10000, 20000);
3508
3509         napi_disable(&adapter->napi);
3510         e1000_irq_disable(adapter);
3511
3512         del_timer_sync(&adapter->watchdog_timer);
3513         del_timer_sync(&adapter->phy_info_timer);
3514
3515         netif_carrier_off(netdev);
3516
3517         spin_lock(&adapter->stats64_lock);
3518         e1000e_update_stats(adapter);
3519         spin_unlock(&adapter->stats64_lock);
3520
3521         e1000e_flush_descriptors(adapter);
3522         e1000_clean_tx_ring(adapter);
3523         e1000_clean_rx_ring(adapter);
3524
3525         adapter->link_speed = 0;
3526         adapter->link_duplex = 0;
3527
3528         if (!pci_channel_offline(adapter->pdev))
3529                 e1000e_reset(adapter);
3530
3531         /*
3532          * TODO: for power management, we could drop the link and
3533          * pci_disable_device here.
3534          */
3535 }
3536
3537 void e1000e_reinit_locked(struct e1000_adapter *adapter)
3538 {
3539         might_sleep();
3540         while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
3541                 usleep_range(1000, 2000);
3542         e1000e_down(adapter);
3543         e1000e_up(adapter);
3544         clear_bit(__E1000_RESETTING, &adapter->state);
3545 }
3546
3547 /**
3548  * e1000_sw_init - Initialize general software structures (struct e1000_adapter)
3549  * @adapter: board private structure to initialize
3550  *
3551  * e1000_sw_init initializes the Adapter private data structure.
3552  * Fields are initialized based on PCI device information and
3553  * OS network device settings (MTU size).
3554  **/
3555 static int __devinit e1000_sw_init(struct e1000_adapter *adapter)
3556 {
3557         struct net_device *netdev = adapter->netdev;
3558
3559         adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN;
3560         adapter->rx_ps_bsize0 = 128;
3561         adapter->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN;
3562         adapter->min_frame_size = ETH_ZLEN + ETH_FCS_LEN;
3563
3564         spin_lock_init(&adapter->stats64_lock);
3565
3566         e1000e_set_interrupt_capability(adapter);
3567
3568         if (e1000_alloc_queues(adapter))
3569                 return -ENOMEM;
3570
3571         /* Explicitly disable IRQ since the NIC can be in any state. */
3572         e1000_irq_disable(adapter);
3573
3574         set_bit(__E1000_DOWN, &adapter->state);
3575         return 0;
3576 }
3577
3578 /**
3579  * e1000_intr_msi_test - Interrupt Handler
3580  * @irq: interrupt number
3581  * @data: pointer to a network interface device structure
3582  **/
3583 static irqreturn_t e1000_intr_msi_test(int irq, void *data)
3584 {
3585         struct net_device *netdev = data;
3586         struct e1000_adapter *adapter = netdev_priv(netdev);
3587         struct e1000_hw *hw = &adapter->hw;
3588         u32 icr = er32(ICR);
3589
3590         e_dbg("icr is %08X\n", icr);
3591         if (icr & E1000_ICR_RXSEQ) {
3592                 adapter->flags &= ~FLAG_MSI_TEST_FAILED;
3593                 wmb();
3594         }
3595
3596         return IRQ_HANDLED;
3597 }
3598
3599 /**
3600  * e1000_test_msi_interrupt - Returns 0 for successful test
3601  * @adapter: board private struct
3602  *
3603  * code flow taken from tg3.c
3604  **/
3605 static int e1000_test_msi_interrupt(struct e1000_adapter *adapter)
3606 {
3607         struct net_device *netdev = adapter->netdev;
3608         struct e1000_hw *hw = &adapter->hw;
3609         int err;
3610
3611         /* poll_enable hasn't been called yet, so don't need disable */
3612         /* clear any pending events */
3613         er32(ICR);
3614
3615         /* free the real vector and request a test handler */
3616         e1000_free_irq(adapter);
3617         e1000e_reset_interrupt_capability(adapter);
3618
3619         /* Assume that the test fails, if it succeeds then the test
3620          * MSI irq handler will unset this flag */
3621         adapter->flags |= FLAG_MSI_TEST_FAILED;
3622
3623         err = pci_enable_msi(adapter->pdev);
3624         if (err)
3625                 goto msi_test_failed;
3626
3627         err = request_irq(adapter->pdev->irq, e1000_intr_msi_test, 0,
3628                           netdev->name, netdev);
3629         if (err) {
3630                 pci_disable_msi(adapter->pdev);
3631                 goto msi_test_failed;
3632         }
3633
3634         wmb();
3635
3636         e1000_irq_enable(adapter);
3637
3638         /* fire an unusual interrupt on the test handler */
3639         ew32(ICS, E1000_ICS_RXSEQ);
3640         e1e_flush();
3641         msleep(50);
3642
3643         e1000_irq_disable(adapter);
3644
3645         rmb();
3646
3647         if (adapter->flags & FLAG_MSI_TEST_FAILED) {
3648                 adapter->int_mode = E1000E_INT_MODE_LEGACY;
3649                 e_info("MSI interrupt test failed, using legacy interrupt.\n");
3650         } else
3651                 e_dbg("MSI interrupt test succeeded!\n");
3652
3653         free_irq(adapter->pdev->irq, netdev);
3654         pci_disable_msi(adapter->pdev);
3655
3656 msi_test_failed:
3657         e1000e_set_interrupt_capability(adapter);
3658         return e1000_request_irq(adapter);
3659 }
3660
3661 /**
3662  * e1000_test_msi - Returns 0 if MSI test succeeds or INTx mode is restored
3663  * @adapter: board private struct
3664  *
3665  * code flow taken from tg3.c, called with e1000 interrupts disabled.
3666  **/
3667 static int e1000_test_msi(struct e1000_adapter *adapter)
3668 {
3669         int err;
3670         u16 pci_cmd;
3671
3672         if (!(adapter->flags & FLAG_MSI_ENABLED))
3673                 return 0;
3674
3675         /* disable SERR in case the MSI write causes a master abort */
3676         pci_read_config_word(adapter->pdev, PCI_COMMAND, &pci_cmd);
3677         if (pci_cmd & PCI_COMMAND_SERR)
3678                 pci_write_config_word(adapter->pdev, PCI_COMMAND,
3679                                       pci_cmd & ~PCI_COMMAND_SERR);
3680
3681         err = e1000_test_msi_interrupt(adapter);
3682
3683         /* re-enable SERR */
3684         if (pci_cmd & PCI_COMMAND_SERR) {
3685                 pci_read_config_word(adapter->pdev, PCI_COMMAND, &pci_cmd);
3686                 pci_cmd |= PCI_COMMAND_SERR;
3687                 pci_write_config_word(adapter->pdev, PCI_COMMAND, pci_cmd);
3688         }
3689
3690         return err;
3691 }
3692
3693 /**
3694  * e1000_open - Called when a network interface is made active
3695  * @netdev: network interface device structure
3696  *
3697  * Returns 0 on success, negative value on failure
3698  *
3699  * The open entry point is called when a network interface is made
3700  * active by the system (IFF_UP).  At this point all resources needed
3701  * for transmit and receive operations are allocated, the interrupt
3702  * handler is registered with the OS, the watchdog timer is started,
3703  * and the stack is notified that the interface is ready.
3704  **/
3705 static int e1000_open(struct net_device *netdev)
3706 {
3707         struct e1000_adapter *adapter = netdev_priv(netdev);
3708         struct e1000_hw *hw = &adapter->hw;
3709         struct pci_dev *pdev = adapter->pdev;
3710         int err;
3711
3712         /* disallow open during test */
3713         if (test_bit(__E1000_TESTING, &adapter->state))
3714                 return -EBUSY;
3715
3716         pm_runtime_get_sync(&pdev->dev);
3717
3718         netif_carrier_off(netdev);
3719
3720         /* allocate transmit descriptors */
3721         err = e1000e_setup_tx_resources(adapter);
3722         if (err)
3723                 goto err_setup_tx;
3724
3725         /* allocate receive descriptors */
3726         err = e1000e_setup_rx_resources(adapter);
3727         if (err)
3728                 goto err_setup_rx;
3729
3730         /*
3731          * If AMT is enabled, let the firmware know that the network
3732          * interface is now open and reset the part to a known state.
3733          */
3734         if (adapter->flags & FLAG_HAS_AMT) {
3735                 e1000e_get_hw_control(adapter);
3736                 e1000e_reset(adapter);
3737         }
3738
3739         e1000e_power_up_phy(adapter);
3740
3741         adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
3742         if ((adapter->hw.mng_cookie.status &
3743              E1000_MNG_DHCP_COOKIE_STATUS_VLAN))
3744                 e1000_update_mng_vlan(adapter);
3745
3746         /* DMA latency requirement to workaround early-receive/jumbo issue */
3747         if ((adapter->flags & FLAG_HAS_ERT) ||
3748             (adapter->hw.mac.type == e1000_pch2lan))
3749                 pm_qos_add_request(&adapter->netdev->pm_qos_req,
3750                                    PM_QOS_CPU_DMA_LATENCY,
3751                                    PM_QOS_DEFAULT_VALUE);
3752
3753         /*
3754          * before we allocate an interrupt, we must be ready to handle it.
3755          * Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt
3756          * as soon as we call pci_request_irq, so we have to setup our
3757          * clean_rx handler before we do so.
3758          */
3759         e1000_configure(adapter);
3760
3761         err = e1000_request_irq(adapter);
3762         if (err)
3763                 goto err_req_irq;
3764
3765         /*
3766          * Work around PCIe errata with MSI interrupts causing some chipsets to
3767          * ignore e1000e MSI messages, which means we need to test our MSI
3768          * interrupt now
3769          */
3770         if (adapter->int_mode != E1000E_INT_MODE_LEGACY) {
3771                 err = e1000_test_msi(adapter);
3772                 if (err) {
3773                         e_err("Interrupt allocation failed\n");
3774                         goto err_req_irq;
3775                 }
3776         }
3777
3778         /* From here on the code is the same as e1000e_up() */
3779         clear_bit(__E1000_DOWN, &adapter->state);
3780
3781         napi_enable(&adapter->napi);
3782
3783         e1000_irq_enable(adapter);
3784
3785         netif_start_queue(netdev);
3786
3787         adapter->idle_check = true;
3788         pm_runtime_put(&pdev->dev);
3789
3790         /* fire a link status change interrupt to start the watchdog */
3791         if (adapter->msix_entries)
3792                 ew32(ICS, E1000_ICS_LSC | E1000_ICR_OTHER);
3793         else
3794                 ew32(ICS, E1000_ICS_LSC);
3795
3796         return 0;
3797
3798 err_req_irq:
3799         e1000e_release_hw_control(adapter);
3800         e1000_power_down_phy(adapter);
3801         e1000e_free_rx_resources(adapter);
3802 err_setup_rx:
3803         e1000e_free_tx_resources(adapter);
3804 err_setup_tx:
3805         e1000e_reset(adapter);
3806         pm_runtime_put_sync(&pdev->dev);
3807
3808         return err;
3809 }
3810
3811 /**
3812  * e1000_close - Disables a network interface
3813  * @netdev: network interface device structure
3814  *
3815  * Returns 0, this is not allowed to fail
3816  *
3817  * The close entry point is called when an interface is de-activated
3818  * by the OS.  The hardware is still under the drivers control, but
3819  * needs to be disabled.  A global MAC reset is issued to stop the
3820  * hardware, and all transmit and receive resources are freed.
3821  **/
3822 static int e1000_close(struct net_device *netdev)
3823 {
3824         struct e1000_adapter *adapter = netdev_priv(netdev);
3825         struct pci_dev *pdev = adapter->pdev;
3826
3827         WARN_ON(test_bit(__E1000_RESETTING, &adapter->state));
3828
3829         pm_runtime_get_sync(&pdev->dev);
3830
3831         if (!test_bit(__E1000_DOWN, &adapter->state)) {
3832                 e1000e_down(adapter);
3833                 e1000_free_irq(adapter);
3834         }
3835         e1000_power_down_phy(adapter);
3836
3837         e1000e_free_tx_resources(adapter);
3838         e1000e_free_rx_resources(adapter);
3839
3840         /*
3841          * kill manageability vlan ID if supported, but not if a vlan with
3842          * the same ID is registered on the host OS (let 8021q kill it)
3843          */
3844         if (adapter->hw.mng_cookie.status &
3845             E1000_MNG_DHCP_COOKIE_STATUS_VLAN)
3846                 e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id);
3847
3848         /*
3849          * If AMT is enabled, let the firmware know that the network
3850          * interface is now closed
3851          */
3852         if ((adapter->flags & FLAG_HAS_AMT) &&
3853             !test_bit(__E1000_TESTING, &adapter->state))
3854                 e1000e_release_hw_control(adapter);
3855
3856         if ((adapter->flags & FLAG_HAS_ERT) ||
3857             (adapter->hw.mac.type == e1000_pch2lan))
3858                 pm_qos_remove_request(&adapter->netdev->pm_qos_req);
3859
3860         pm_runtime_put_sync(&pdev->dev);
3861
3862         return 0;
3863 }
3864 /**
3865  * e1000_set_mac - Change the Ethernet Address of the NIC
3866  * @netdev: network interface device structure
3867  * @p: pointer to an address structure
3868  *
3869  * Returns 0 on success, negative on failure
3870  **/
3871 static int e1000_set_mac(struct net_device *netdev, void *p)
3872 {
3873         struct e1000_adapter *adapter = netdev_priv(netdev);
3874         struct sockaddr *addr = p;
3875
3876         if (!is_valid_ether_addr(addr->sa_data))
3877                 return -EADDRNOTAVAIL;
3878
3879         memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
3880         memcpy(adapter->hw.mac.addr, addr->sa_data, netdev->addr_len);
3881
3882         e1000e_rar_set(&adapter->hw, adapter->hw.mac.addr, 0);
3883
3884         if (adapter->flags & FLAG_RESET_OVERWRITES_LAA) {
3885                 /* activate the work around */
3886                 e1000e_set_laa_state_82571(&adapter->hw, 1);
3887
3888                 /*
3889                  * Hold a copy of the LAA in RAR[14] This is done so that
3890                  * between the time RAR[0] gets clobbered  and the time it
3891                  * gets fixed (in e1000_watchdog), the actual LAA is in one
3892                  * of the RARs and no incoming packets directed to this port
3893                  * are dropped. Eventually the LAA will be in RAR[0] and
3894                  * RAR[14]
3895                  */
3896                 e1000e_rar_set(&adapter->hw,
3897                               adapter->hw.mac.addr,
3898                               adapter->hw.mac.rar_entry_count - 1);
3899         }
3900
3901         return 0;
3902 }
3903
3904 /**
3905  * e1000e_update_phy_task - work thread to update phy
3906  * @work: pointer to our work struct
3907  *
3908  * this worker thread exists because we must acquire a
3909  * semaphore to read the phy, which we could msleep while
3910  * waiting for it, and we can't msleep in a timer.
3911  **/
3912 static void e1000e_update_phy_task(struct work_struct *work)
3913 {
3914         struct e1000_adapter *adapter = container_of(work,
3915                                         struct e1000_adapter, update_phy_task);
3916
3917         if (test_bit(__E1000_DOWN, &adapter->state))
3918                 return;
3919
3920         e1000_get_phy_info(&adapter->hw);
3921 }
3922
3923 /*
3924  * Need to wait a few seconds after link up to get diagnostic information from
3925  * the phy
3926  */
3927 static void e1000_update_phy_info(unsigned long data)
3928 {
3929         struct e1000_adapter *adapter = (struct e1000_adapter *) data;
3930
3931         if (test_bit(__E1000_DOWN, &adapter->state))
3932                 return;
3933
3934         schedule_work(&adapter->update_phy_task);
3935 }
3936
3937 /**
3938  * e1000e_update_phy_stats - Update the PHY statistics counters
3939  * @adapter: board private structure
3940  *
3941  * Read/clear the upper 16-bit PHY registers and read/accumulate lower
3942  **/
3943 static void e1000e_update_phy_stats(struct e1000_adapter *adapter)
3944 {
3945         struct e1000_hw *hw = &adapter->hw;
3946         s32 ret_val;
3947         u16 phy_data;
3948
3949         ret_val = hw->phy.ops.acquire(hw);
3950         if (ret_val)
3951                 return;
3952
3953         /*
3954          * A page set is expensive so check if already on desired page.
3955          * If not, set to the page with the PHY status registers.
3956          */
3957         hw->phy.addr = 1;
3958         ret_val = e1000e_read_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT,
3959                                            &phy_data);
3960         if (ret_val)
3961                 goto release;
3962         if (phy_data != (HV_STATS_PAGE << IGP_PAGE_SHIFT)) {
3963                 ret_val = hw->phy.ops.set_page(hw,
3964                                                HV_STATS_PAGE << IGP_PAGE_SHIFT);
3965                 if (ret_val)
3966                         goto release;
3967         }
3968
3969         /* Single Collision Count */
3970         hw->phy.ops.read_reg_page(hw, HV_SCC_UPPER, &phy_data);
3971         ret_val = hw->phy.ops.read_reg_page(hw, HV_SCC_LOWER, &phy_data);
3972         if (!ret_val)
3973                 adapter->stats.scc += phy_data;
3974
3975         /* Excessive Collision Count */
3976         hw->phy.ops.read_reg_page(hw, HV_ECOL_UPPER, &phy_data);
3977         ret_val = hw->phy.ops.read_reg_page(hw, HV_ECOL_LOWER, &phy_data);
3978         if (!ret_val)
3979                 adapter->stats.ecol += phy_data;
3980
3981         /* Multiple Collision Count */
3982         hw->phy.ops.read_reg_page(hw, HV_MCC_UPPER, &phy_data);
3983         ret_val = hw->phy.ops.read_reg_page(hw, HV_MCC_LOWER, &phy_data);
3984         if (!ret_val)
3985                 adapter->stats.mcc += phy_data;
3986
3987         /* Late Collision Count */
3988         hw->phy.ops.read_reg_page(hw, HV_LATECOL_UPPER, &phy_data);
3989         ret_val = hw->phy.ops.read_reg_page(hw, HV_LATECOL_LOWER, &phy_data);
3990         if (!ret_val)
3991                 adapter->stats.latecol += phy_data;
3992
3993         /* Collision Count - also used for adaptive IFS */
3994         hw->phy.ops.read_reg_page(hw, HV_COLC_UPPER, &phy_data);
3995         ret_val = hw->phy.ops.read_reg_page(hw, HV_COLC_LOWER, &phy_data);
3996         if (!ret_val)
3997                 hw->mac.collision_delta = phy_data;
3998
3999         /* Defer Count */
4000         hw->phy.ops.read_reg_page(hw, HV_DC_UPPER, &phy_data);
4001         ret_val = hw->phy.ops.read_reg_page(hw, HV_DC_LOWER, &phy_data);
4002         if (!ret_val)
4003                 adapter->stats.dc += phy_data;
4004
4005         /* Transmit with no CRS */
4006         hw->phy.ops.read_reg_page(hw, HV_TNCRS_UPPER, &phy_data);
4007         ret_val = hw->phy.ops.read_reg_page(hw, HV_TNCRS_LOWER, &phy_data);
4008         if (!ret_val)
4009                 adapter->stats.tncrs += phy_data;
4010
4011 release:
4012         hw->phy.ops.release(hw);
4013 }
4014
4015 /**
4016  * e1000e_update_stats - Update the board statistics counters
4017  * @adapter: board private structure
4018  **/
4019 static void e1000e_update_stats(struct e1000_adapter *adapter)
4020 {
4021         struct net_device *netdev = adapter->netdev;
4022         struct e1000_hw *hw = &adapter->hw;
4023         struct pci_dev *pdev = adapter->pdev;
4024
4025         /*
4026          * Prevent stats update while adapter is being reset, or if the pci
4027          * connection is down.
4028          */
4029         if (adapter->link_speed == 0)
4030                 return;
4031         if (pci_channel_offline(pdev))
4032                 return;
4033
4034         adapter->stats.crcerrs += er32(CRCERRS);
4035         adapter->stats.gprc += er32(GPRC);
4036         adapter->stats.gorc += er32(GORCL);
4037         er32(GORCH); /* Clear gorc */
4038         adapter->stats.bprc += er32(BPRC);
4039         adapter->stats.mprc += er32(MPRC);
4040         adapter->stats.roc += er32(ROC);
4041
4042         adapter->stats.mpc += er32(MPC);
4043
4044         /* Half-duplex statistics */
4045         if (adapter->link_duplex == HALF_DUPLEX) {
4046                 if (adapter->flags2 & FLAG2_HAS_PHY_STATS) {
4047                         e1000e_update_phy_stats(adapter);
4048                 } else {
4049                         adapter->stats.scc += er32(SCC);
4050                         adapter->stats.ecol += er32(ECOL);
4051                         adapter->stats.mcc += er32(MCC);
4052                         adapter->stats.latecol += er32(LATECOL);
4053                         adapter->stats.dc += er32(DC);
4054
4055                         hw->mac.collision_delta = er32(COLC);
4056
4057                         if ((hw->mac.type != e1000_82574) &&
4058                             (hw->mac.type != e1000_82583))
4059                                 adapter->stats.tncrs += er32(TNCRS);
4060                 }
4061                 adapter->stats.colc += hw->mac.collision_delta;
4062         }
4063
4064         adapter->stats.xonrxc += er32(XONRXC);
4065         adapter->stats.xontxc += er32(XONTXC);
4066         adapter->stats.xoffrxc += er32(XOFFRXC);
4067         adapter->stats.xofftxc += er32(XOFFTXC);
4068         adapter->stats.gptc += er32(GPTC);
4069         adapter->stats.gotc += er32(GOTCL);
4070         er32(GOTCH); /* Clear gotc */
4071         adapter->stats.rnbc += er32(RNBC);
4072         adapter->stats.ruc += er32(RUC);
4073
4074         adapter->stats.mptc += er32(MPTC);
4075         adapter->stats.bptc += er32(BPTC);
4076
4077         /* used for adaptive IFS */
4078
4079         hw->mac.tx_packet_delta = er32(TPT);
4080         adapter->stats.tpt += hw->mac.tx_packet_delta;
4081
4082         adapter->stats.algnerrc += er32(ALGNERRC);
4083         adapter->stats.rxerrc += er32(RXERRC);
4084         adapter->stats.cexterr += er32(CEXTERR);
4085         adapter->stats.tsctc += er32(TSCTC);
4086         adapter->stats.tsctfc += er32(TSCTFC);
4087
4088         /* Fill out the OS statistics structure */
4089         netdev->stats.multicast = adapter->stats.mprc;
4090         netdev->stats.collisions = adapter->stats.colc;
4091
4092         /* Rx Errors */
4093
4094         /*
4095          * RLEC on some newer hardware can be incorrect so build
4096          * our own version based on RUC and ROC
4097          */
4098         netdev->stats.rx_errors = adapter->stats.rxerrc +
4099                 adapter->stats.crcerrs + adapter->stats.algnerrc +
4100                 adapter->stats.ruc + adapter->stats.roc +
4101                 adapter->stats.cexterr;
4102         netdev->stats.rx_length_errors = adapter->stats.ruc +
4103                                               adapter->stats.roc;
4104         netdev->stats.rx_crc_errors = adapter->stats.crcerrs;
4105         netdev->stats.rx_frame_errors = adapter->stats.algnerrc;
4106         netdev->stats.rx_missed_errors = adapter->stats.mpc;
4107
4108         /* Tx Errors */
4109         netdev->stats.tx_errors = adapter->stats.ecol +
4110                                        adapter->stats.latecol;
4111         netdev->stats.tx_aborted_errors = adapter->stats.ecol;
4112         netdev->stats.tx_window_errors = adapter->stats.latecol;
4113         netdev->stats.tx_carrier_errors = adapter->stats.tncrs;
4114
4115         /* Tx Dropped needs to be maintained elsewhere */
4116
4117         /* Management Stats */
4118         adapter->stats.mgptc += er32(MGTPTC);
4119         adapter->stats.mgprc += er32(MGTPRC);
4120         adapter->stats.mgpdc += er32(MGTPDC);
4121 }
4122
4123 /**
4124  * e1000_phy_read_status - Update the PHY register status snapshot
4125  * @adapter: board private structure
4126  **/
4127 static void e1000_phy_read_status(struct e1000_adapter *adapter)
4128 {
4129         struct e1000_hw *hw = &adapter->hw;
4130         struct e1000_phy_regs *phy = &adapter->phy_regs;
4131
4132         if ((er32(STATUS) & E1000_STATUS_LU) &&
4133             (adapter->hw.phy.media_type == e1000_media_type_copper)) {
4134                 int ret_val;
4135
4136                 ret_val  = e1e_rphy(hw, PHY_CONTROL, &phy->bmcr);
4137                 ret_val |= e1e_rphy(hw, PHY_STATUS, &phy->bmsr);
4138                 ret_val |= e1e_rphy(hw, PHY_AUTONEG_ADV, &phy->advertise);
4139                 ret_val |= e1e_rphy(hw, PHY_LP_ABILITY, &phy->lpa);
4140                 ret_val |= e1e_rphy(hw, PHY_AUTONEG_EXP, &phy->expansion);
4141                 ret_val |= e1e_rphy(hw, PHY_1000T_CTRL, &phy->ctrl1000);
4142                 ret_val |= e1e_rphy(hw, PHY_1000T_STATUS, &phy->stat1000);
4143                 ret_val |= e1e_rphy(hw, PHY_EXT_STATUS, &phy->estatus);
4144                 if (ret_val)
4145                         e_warn("Error reading PHY register\n");
4146         } else {
4147                 /*
4148                  * Do not read PHY registers if link is not up
4149                  * Set values to typical power-on defaults
4150                  */
4151                 phy->bmcr = (BMCR_SPEED1000 | BMCR_ANENABLE | BMCR_FULLDPLX);
4152                 phy->bmsr = (BMSR_100FULL | BMSR_100HALF | BMSR_10FULL |
4153                              BMSR_10HALF | BMSR_ESTATEN | BMSR_ANEGCAPABLE |
4154                              BMSR_ERCAP);
4155                 phy->advertise = (ADVERTISE_PAUSE_ASYM | ADVERTISE_PAUSE_CAP |
4156                                   ADVERTISE_ALL | ADVERTISE_CSMA);
4157                 phy->lpa = 0;
4158                 phy->expansion = EXPANSION_ENABLENPAGE;
4159                 phy->ctrl1000 = ADVERTISE_1000FULL;
4160                 phy->stat1000 = 0;
4161                 phy->estatus = (ESTATUS_1000_TFULL | ESTATUS_1000_THALF);
4162         }
4163 }
4164
4165 static void e1000_print_link_info(struct e1000_adapter *adapter)
4166 {
4167         struct e1000_hw *hw = &adapter->hw;
4168         u32 ctrl = er32(CTRL);
4169
4170         /* Link status message must follow this format for user tools */
4171         printk(KERN_INFO "e1000e: %s NIC Link is Up %d Mbps %s, "
4172                "Flow Control: %s\n",
4173                adapter->netdev->name,
4174                adapter->link_speed,
4175                (adapter->link_duplex == FULL_DUPLEX) ?
4176                "Full Duplex" : "Half Duplex",
4177                ((ctrl & E1000_CTRL_TFCE) && (ctrl & E1000_CTRL_RFCE)) ?
4178                "Rx/Tx" :
4179                ((ctrl & E1000_CTRL_RFCE) ? "Rx" :
4180                 ((ctrl & E1000_CTRL_TFCE) ? "Tx" : "None")));
4181 }
4182
4183 static bool e1000e_has_link(struct e1000_adapter *adapter)
4184 {
4185         struct e1000_hw *hw = &adapter->hw;
4186         bool link_active = 0;
4187         s32 ret_val = 0;
4188
4189         /*
4190          * get_link_status is set on LSC (link status) interrupt or
4191          * Rx sequence error interrupt.  get_link_status will stay
4192          * false until the check_for_link establishes link
4193          * for copper adapters ONLY
4194          */
4195         switch (hw->phy.media_type) {
4196         case e1000_media_type_copper:
4197                 if (hw->mac.get_link_status) {
4198                         ret_val = hw->mac.ops.check_for_link(hw);
4199                         link_active = !hw->mac.get_link_status;
4200                 } else {
4201                         link_active = 1;
4202                 }
4203                 break;
4204         case e1000_media_type_fiber:
4205                 ret_val = hw->mac.ops.check_for_link(hw);
4206                 link_active = !!(er32(STATUS) & E1000_STATUS_LU);
4207                 break;
4208         case e1000_media_type_internal_serdes:
4209                 ret_val = hw->mac.ops.check_for_link(hw);
4210                 link_active = adapter->hw.mac.serdes_has_link;
4211                 break;
4212         default:
4213         case e1000_media_type_unknown:
4214                 break;
4215         }
4216
4217         if ((ret_val == E1000_ERR_PHY) && (hw->phy.type == e1000_phy_igp_3) &&
4218             (er32(CTRL) & E1000_PHY_CTRL_GBE_DISABLE)) {
4219                 /* See e1000_kmrn_lock_loss_workaround_ich8lan() */
4220                 e_info("Gigabit has been disabled, downgrading speed\n");
4221         }
4222
4223         return link_active;
4224 }
4225
4226 static void e1000e_enable_receives(struct e1000_adapter *adapter)
4227 {
4228         /* make sure the receive unit is started */
4229         if ((adapter->flags & FLAG_RX_NEEDS_RESTART) &&
4230             (adapter->flags & FLAG_RX_RESTART_NOW)) {
4231                 struct e1000_hw *hw = &adapter->hw;
4232                 u32 rctl = er32(RCTL);
4233                 ew32(RCTL, rctl | E1000_RCTL_EN);
4234                 adapter->flags &= ~FLAG_RX_RESTART_NOW;
4235         }
4236 }
4237
4238 static void e1000e_check_82574_phy_workaround(struct e1000_adapter *adapter)
4239 {
4240         struct e1000_hw *hw = &adapter->hw;
4241
4242         /*
4243          * With 82574 controllers, PHY needs to be checked periodically
4244          * for hung state and reset, if two calls return true
4245          */
4246         if (e1000_check_phy_82574(hw))
4247                 adapter->phy_hang_count++;
4248         else
4249                 adapter->phy_hang_count = 0;
4250
4251         if (adapter->phy_hang_count > 1) {
4252                 adapter->phy_hang_count = 0;
4253                 schedule_work(&adapter->reset_task);
4254         }
4255 }
4256
4257 /**
4258  * e1000_watchdog - Timer Call-back
4259  * @data: pointer to adapter cast into an unsigned long
4260  **/
4261 static void e1000_watchdog(unsigned long data)
4262 {
4263         struct e1000_adapter *adapter = (struct e1000_adapter *) data;
4264
4265         /* Do the rest outside of interrupt context */
4266         schedule_work(&adapter->watchdog_task);
4267
4268         /* TODO: make this use queue_delayed_work() */
4269 }
4270
4271 static void e1000_watchdog_task(struct work_struct *work)
4272 {
4273         struct e1000_adapter *adapter = container_of(work,
4274                                         struct e1000_adapter, watchdog_task);
4275         struct net_device *netdev = adapter->netdev;
4276         struct e1000_mac_info *mac = &adapter->hw.mac;
4277         struct e1000_phy_info *phy = &adapter->hw.phy;
4278         struct e1000_ring *tx_ring = adapter->tx_ring;
4279         struct e1000_hw *hw = &adapter->hw;
4280         u32 link, tctl;
4281
4282         if (test_bit(__E1000_DOWN, &adapter->state))
4283                 return;
4284
4285         link = e1000e_has_link(adapter);
4286         if ((netif_carrier_ok(netdev)) && link) {
4287                 /* Cancel scheduled suspend requests. */
4288                 pm_runtime_resume(netdev->dev.parent);
4289
4290                 e1000e_enable_receives(adapter);
4291                 goto link_up;
4292         }
4293
4294         if ((e1000e_enable_tx_pkt_filtering(hw)) &&
4295             (adapter->mng_vlan_id != adapter->hw.mng_cookie.vlan_id))
4296                 e1000_update_mng_vlan(adapter);
4297
4298         if (link) {
4299                 if (!netif_carrier_ok(netdev)) {
4300                         bool txb2b = 1;
4301
4302                         /* Cancel scheduled suspend requests. */
4303                         pm_runtime_resume(netdev->dev.parent);
4304
4305                         /* update snapshot of PHY registers on LSC */
4306                         e1000_phy_read_status(adapter);
4307                         mac->ops.get_link_up_info(&adapter->hw,
4308                                                    &adapter->link_speed,
4309                                                    &adapter->link_duplex);
4310                         e1000_print_link_info(adapter);
4311                         /*
4312                          * On supported PHYs, check for duplex mismatch only
4313                          * if link has autonegotiated at 10/100 half
4314                          */
4315                         if ((hw->phy.type == e1000_phy_igp_3 ||
4316                              hw->phy.type == e1000_phy_bm) &&
4317                             (hw->mac.autoneg == true) &&
4318                             (adapter->link_speed == SPEED_10 ||
4319                              adapter->link_speed == SPEED_100) &&
4320                             (adapter->link_duplex == HALF_DUPLEX)) {
4321                                 u16 autoneg_exp;
4322
4323                                 e1e_rphy(hw, PHY_AUTONEG_EXP, &autoneg_exp);
4324
4325                                 if (!(autoneg_exp & NWAY_ER_LP_NWAY_CAPS))
4326                                         e_info("Autonegotiated half duplex but"
4327                                                " link partner cannot autoneg. "
4328                                                " Try forcing full duplex if "
4329                                                "link gets many collisions.\n");
4330                         }
4331
4332                         /* adjust timeout factor according to speed/duplex */
4333                         adapter->tx_timeout_factor = 1;
4334                         switch (adapter->link_speed) {
4335                         case SPEED_10:
4336                                 txb2b = 0;
4337                                 adapter->tx_timeout_factor = 16;
4338                                 break;
4339                         case SPEED_100:
4340                                 txb2b = 0;
4341                                 adapter->tx_timeout_factor = 10;
4342                                 break;
4343                         }
4344
4345                         /*
4346                          * workaround: re-program speed mode bit after
4347                          * link-up event
4348                          */
4349                         if ((adapter->flags & FLAG_TARC_SPEED_MODE_BIT) &&
4350                             !txb2b) {
4351                                 u32 tarc0;
4352                                 tarc0 = er32(TARC(0));
4353                                 tarc0 &= ~SPEED_MODE_BIT;
4354                                 ew32(TARC(0), tarc0);
4355                         }
4356
4357                         /*
4358                          * disable TSO for pcie and 10/100 speeds, to avoid
4359                          * some hardware issues
4360                          */
4361                         if (!(adapter->flags & FLAG_TSO_FORCE)) {
4362                                 switch (adapter->link_speed) {
4363                                 case SPEED_10:
4364                                 case SPEED_100:
4365                                         e_info("10/100 speed: disabling TSO\n");
4366                                         netdev->features &= ~NETIF_F_TSO;
4367                                         netdev->features &= ~NETIF_F_TSO6;
4368                                         break;
4369                                 case SPEED_1000:
4370                                         netdev->features |= NETIF_F_TSO;
4371                                         netdev->features |= NETIF_F_TSO6;
4372                                         break;
4373                                 default:
4374                                         /* oops */
4375                                         break;
4376                                 }
4377                         }
4378
4379                         /*
4380                          * enable transmits in the hardware, need to do this
4381                          * after setting TARC(0)
4382                          */
4383                         tctl = er32(TCTL);
4384                         tctl |= E1000_TCTL_EN;
4385                         ew32(TCTL, tctl);
4386
4387                         /*
4388                          * Perform any post-link-up configuration before
4389                          * reporting link up.
4390                          */
4391                         if (phy->ops.cfg_on_link_up)
4392                                 phy->ops.cfg_on_link_up(hw);
4393
4394                         netif_carrier_on(netdev);
4395
4396                         if (!test_bit(__E1000_DOWN, &adapter->state))
4397                                 mod_timer(&adapter->phy_info_timer,
4398                                           round_jiffies(jiffies + 2 * HZ));
4399                 }
4400         } else {
4401                 if (netif_carrier_ok(netdev)) {
4402                         adapter->link_speed = 0;
4403                         adapter->link_duplex = 0;
4404                         /* Link status message must follow this format */
4405                         printk(KERN_INFO "e1000e: %s NIC Link is Down\n",
4406                                adapter->netdev->name);
4407                         netif_carrier_off(netdev);
4408                         if (!test_bit(__E1000_DOWN, &adapter->state))
4409                                 mod_timer(&adapter->phy_info_timer,
4410                                           round_jiffies(jiffies + 2 * HZ));
4411
4412                         if (adapter->flags & FLAG_RX_NEEDS_RESTART)
4413                                 schedule_work(&adapter->reset_task);
4414                         else
4415                                 pm_schedule_suspend(netdev->dev.parent,
4416                                                         LINK_TIMEOUT);
4417                 }
4418         }
4419
4420 link_up:
4421         spin_lock(&adapter->stats64_lock);
4422         e1000e_update_stats(adapter);
4423
4424         mac->tx_packet_delta = adapter->stats.tpt - adapter->tpt_old;
4425         adapter->tpt_old = adapter->stats.tpt;
4426         mac->collision_delta = adapter->stats.colc - adapter->colc_old;
4427         adapter->colc_old = adapter->stats.colc;
4428
4429         adapter->gorc = adapter->stats.gorc - adapter->gorc_old;
4430         adapter->gorc_old = adapter->stats.gorc;
4431         adapter->gotc = adapter->stats.gotc - adapter->gotc_old;
4432         adapter->gotc_old = adapter->stats.gotc;
4433         spin_unlock(&adapter->stats64_lock);
4434
4435         e1000e_update_adaptive(&adapter->hw);
4436
4437         if (!netif_carrier_ok(netdev) &&
4438             (e1000_desc_unused(tx_ring) + 1 < tx_ring->count)) {
4439                 /*
4440                  * We've lost link, so the controller stops DMA,
4441                  * but we've got queued Tx work that's never going
4442                  * to get done, so reset controller to flush Tx.
4443                  * (Do the reset outside of interrupt context).
4444                  */
4445                 schedule_work(&adapter->reset_task);
4446                 /* return immediately since reset is imminent */
4447                 return;
4448         }
4449
4450         /* Simple mode for Interrupt Throttle Rate (ITR) */
4451         if (adapter->itr_setting == 4) {
4452                 /*
4453                  * Symmetric Tx/Rx gets a reduced ITR=2000;
4454                  * Total asymmetrical Tx or Rx gets ITR=8000;
4455                  * everyone else is between 2000-8000.
4456                  */
4457                 u32 goc = (adapter->gotc + adapter->gorc) / 10000;
4458                 u32 dif = (adapter->gotc > adapter->gorc ?
4459                             adapter->gotc - adapter->gorc :
4460                             adapter->gorc - adapter->gotc) / 10000;
4461                 u32 itr = goc > 0 ? (dif * 6000 / goc + 2000) : 8000;
4462
4463                 ew32(ITR, 1000000000 / (itr * 256));
4464         }
4465
4466         /* Cause software interrupt to ensure Rx ring is cleaned */
4467         if (adapter->msix_entries)
4468                 ew32(ICS, adapter->rx_ring->ims_val);
4469         else
4470                 ew32(ICS, E1000_ICS_RXDMT0);
4471
4472         /* flush pending descriptors to memory before detecting Tx hang */
4473         e1000e_flush_descriptors(adapter);
4474
4475         /* Force detection of hung controller every watchdog period */
4476         adapter->detect_tx_hung = 1;
4477
4478         /*
4479          * With 82571 controllers, LAA may be overwritten due to controller
4480          * reset from the other port. Set the appropriate LAA in RAR[0]
4481          */
4482         if (e1000e_get_laa_state_82571(hw))
4483                 e1000e_rar_set(hw, adapter->hw.mac.addr, 0);
4484
4485         if (adapter->flags2 & FLAG2_CHECK_PHY_HANG)
4486                 e1000e_check_82574_phy_workaround(adapter);
4487
4488         /* Reset the timer */
4489         if (!test_bit(__E1000_DOWN, &adapter->state))
4490                 mod_timer(&adapter->watchdog_timer,
4491                           round_jiffies(jiffies + 2 * HZ));
4492 }
4493
4494 #define E1000_TX_FLAGS_CSUM             0x00000001
4495 #define E1000_TX_FLAGS_VLAN             0x00000002
4496 #define E1000_TX_FLAGS_TSO              0x00000004
4497 #define E1000_TX_FLAGS_IPV4             0x00000008
4498 #define E1000_TX_FLAGS_VLAN_MASK        0xffff0000
4499 #define E1000_TX_FLAGS_VLAN_SHIFT       16
4500
4501 static int e1000_tso(struct e1000_adapter *adapter,
4502                      struct sk_buff *skb)
4503 {
4504         struct e1000_ring *tx_ring = adapter->tx_ring;
4505         struct e1000_context_desc *context_desc;
4506         struct e1000_buffer *buffer_info;
4507         unsigned int i;
4508         u32 cmd_length = 0;
4509         u16 ipcse = 0, tucse, mss;
4510         u8 ipcss, ipcso, tucss, tucso, hdr_len;
4511
4512         if (!skb_is_gso(skb))
4513                 return 0;
4514
4515         if (skb_header_cloned(skb)) {
4516                 int err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
4517
4518                 if (err)
4519                         return err;
4520         }
4521
4522         hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
4523         mss = skb_shinfo(skb)->gso_size;
4524         if (skb->protocol == htons(ETH_P_IP)) {
4525                 struct iphdr *iph = ip_hdr(skb);
4526                 iph->tot_len = 0;
4527                 iph->check = 0;
4528                 tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr, iph->daddr,
4529                                                          0, IPPROTO_TCP, 0);
4530                 cmd_length = E1000_TXD_CMD_IP;
4531                 ipcse = skb_transport_offset(skb) - 1;
4532         } else if (skb_is_gso_v6(skb)) {
4533                 ipv6_hdr(skb)->payload_len = 0;
4534                 tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
4535                                                        &ipv6_hdr(skb)->daddr,
4536                                                        0, IPPROTO_TCP, 0);
4537                 ipcse = 0;
4538         }
4539         ipcss = skb_network_offset(skb);
4540         ipcso = (void *)&(ip_hdr(skb)->check) - (void *)skb->data;
4541         tucss = skb_transport_offset(skb);
4542         tucso = (void *)&(tcp_hdr(skb)->check) - (void *)skb->data;
4543         tucse = 0;
4544
4545         cmd_length |= (E1000_TXD_CMD_DEXT | E1000_TXD_CMD_TSE |
4546                        E1000_TXD_CMD_TCP | (skb->len - (hdr_len)));
4547
4548         i = tx_ring->next_to_use;
4549         context_desc = E1000_CONTEXT_DESC(*tx_ring, i);
4550         buffer_info = &tx_ring->buffer_info[i];
4551
4552         context_desc->lower_setup.ip_fields.ipcss  = ipcss;
4553         context_desc->lower_setup.ip_fields.ipcso  = ipcso;
4554         context_desc->lower_setup.ip_fields.ipcse  = cpu_to_le16(ipcse);
4555         context_desc->upper_setup.tcp_fields.tucss = tucss;
4556         context_desc->upper_setup.tcp_fields.tucso = tucso;
4557         context_desc->upper_setup.tcp_fields.tucse = cpu_to_le16(tucse);
4558         context_desc->tcp_seg_setup.fields.mss     = cpu_to_le16(mss);
4559         context_desc->tcp_seg_setup.fields.hdr_len = hdr_len;
4560         context_desc->cmd_and_length = cpu_to_le32(cmd_length);
4561
4562         buffer_info->time_stamp = jiffies;
4563         buffer_info->next_to_watch = i;
4564
4565         i++;
4566         if (i == tx_ring->count)
4567                 i = 0;
4568         tx_ring->next_to_use = i;
4569
4570         return 1;
4571 }
4572
4573 static bool e1000_tx_csum(struct e1000_adapter *adapter, struct sk_buff *skb)
4574 {
4575         struct e1000_ring *tx_ring = adapter->tx_ring;
4576         struct e1000_context_desc *context_desc;
4577         struct e1000_buffer *buffer_info;
4578         unsigned int i;
4579         u8 css;
4580         u32 cmd_len = E1000_TXD_CMD_DEXT;
4581         __be16 protocol;
4582
4583         if (skb->ip_summed != CHECKSUM_PARTIAL)
4584                 return 0;
4585
4586         if (skb->protocol == cpu_to_be16(ETH_P_8021Q))
4587                 protocol = vlan_eth_hdr(skb)->h_vlan_encapsulated_proto;
4588         else
4589                 protocol = skb->protocol;
4590
4591         switch (protocol) {
4592         case cpu_to_be16(ETH_P_IP):
4593                 if (ip_hdr(skb)->protocol == IPPROTO_TCP)
4594                         cmd_len |= E1000_TXD_CMD_TCP;
4595                 break;
4596         case cpu_to_be16(ETH_P_IPV6):
4597                 /* XXX not handling all IPV6 headers */
4598                 if (ipv6_hdr(skb)->nexthdr == IPPROTO_TCP)
4599                         cmd_len |= E1000_TXD_CMD_TCP;
4600                 break;
4601         default:
4602                 if (unlikely(net_ratelimit()))
4603                         e_warn("checksum_partial proto=%x!\n",
4604                                be16_to_cpu(protocol));
4605                 break;
4606         }
4607
4608         css = skb_checksum_start_offset(skb);
4609
4610         i = tx_ring->next_to_use;
4611         buffer_info = &tx_ring->buffer_info[i];
4612         context_desc = E1000_CONTEXT_DESC(*tx_ring, i);
4613
4614         context_desc->lower_setup.ip_config = 0;
4615         context_desc->upper_setup.tcp_fields.tucss = css;
4616         context_desc->upper_setup.tcp_fields.tucso =
4617                                 css + skb->csum_offset;
4618         context_desc->upper_setup.tcp_fields.tucse = 0;
4619         context_desc->tcp_seg_setup.data = 0;
4620         context_desc->cmd_and_length = cpu_to_le32(cmd_len);
4621
4622         buffer_info->time_stamp = jiffies;
4623         buffer_info->next_to_watch = i;
4624
4625         i++;
4626         if (i == tx_ring->count)
4627                 i = 0;
4628         tx_ring->next_to_use = i;
4629
4630         return 1;
4631 }
4632
4633 #define E1000_MAX_PER_TXD       8192
4634 #define E1000_MAX_TXD_PWR       12
4635
4636 static int e1000_tx_map(struct e1000_adapter *adapter,
4637                         struct sk_buff *skb, unsigned int first,
4638                         unsigned int max_per_txd, unsigned int nr_frags,
4639                         unsigned int mss)
4640 {
4641         struct e1000_ring *tx_ring = adapter->tx_ring;
4642         struct pci_dev *pdev = adapter->pdev;
4643         struct e1000_buffer *buffer_info;
4644         unsigned int len = skb_headlen(skb);
4645         unsigned int offset = 0, size, count = 0, i;
4646         unsigned int f, bytecount, segs;
4647
4648         i = tx_ring->next_to_use;
4649
4650         while (len) {
4651                 buffer_info = &tx_ring->buffer_info[i];
4652                 size = min(len, max_per_txd);
4653
4654                 buffer_info->length = size;
4655                 buffer_info->time_stamp = jiffies;
4656                 buffer_info->next_to_watch = i;
4657                 buffer_info->dma = dma_map_single(&pdev->dev,
4658                                                   skb->data + offset,
4659                                                   size, DMA_TO_DEVICE);
4660                 buffer_info->mapped_as_page = false;
4661                 if (dma_mapping_error(&pdev->dev, buffer_info->dma))
4662                         goto dma_error;
4663
4664                 len -= size;
4665                 offset += size;
4666                 count++;
4667
4668                 if (len) {
4669                         i++;
4670                         if (i == tx_ring->count)
4671                                 i = 0;
4672                 }
4673         }
4674
4675         for (f = 0; f < nr_frags; f++) {
4676                 const struct skb_frag_struct *frag;
4677
4678                 frag = &skb_shinfo(skb)->frags[f];
4679                 len = skb_frag_size(frag);
4680                 offset = 0;
4681
4682                 while (len) {
4683                         i++;
4684                         if (i == tx_ring->count)
4685                                 i = 0;
4686
4687                         buffer_info = &tx_ring->buffer_info[i];
4688                         size = min(len, max_per_txd);
4689
4690                         buffer_info->length = size;
4691                         buffer_info->time_stamp = jiffies;
4692                         buffer_info->next_to_watch = i;
4693                         buffer_info->dma = skb_frag_dma_map(&pdev->dev, frag,
4694                                                 offset, size, DMA_TO_DEVICE);
4695                         buffer_info->mapped_as_page = true;
4696                         if (dma_mapping_error(&pdev->dev, buffer_info->dma))
4697                                 goto dma_error;
4698
4699                         len -= size;
4700                         offset += size;
4701                         count++;
4702                 }
4703         }
4704
4705         segs = skb_shinfo(skb)->gso_segs ? : 1;
4706         /* multiply data chunks by size of headers */
4707         bytecount = ((segs - 1) * skb_headlen(skb)) + skb->len;
4708
4709         tx_ring->buffer_info[i].skb = skb;
4710         tx_ring->buffer_info[i].segs = segs;
4711         tx_ring->buffer_info[i].bytecount = bytecount;
4712         tx_ring->buffer_info[first].next_to_watch = i;
4713
4714         return count;
4715
4716 dma_error:
4717         dev_err(&pdev->dev, "Tx DMA map failed\n");
4718         buffer_info->dma = 0;
4719         if (count)
4720                 count--;
4721
4722         while (count--) {
4723                 if (i == 0)
4724                         i += tx_ring->count;
4725                 i--;
4726                 buffer_info = &tx_ring->buffer_info[i];
4727                 e1000_put_txbuf(adapter, buffer_info);
4728         }
4729
4730         return 0;
4731 }
4732
4733 static void e1000_tx_queue(struct e1000_adapter *adapter,
4734                            int tx_flags, int count)
4735 {
4736         struct e1000_ring *tx_ring = adapter->tx_ring;
4737         struct e1000_tx_desc *tx_desc = NULL;
4738         struct e1000_buffer *buffer_info;
4739         u32 txd_upper = 0, txd_lower = E1000_TXD_CMD_IFCS;
4740         unsigned int i;
4741
4742         if (tx_flags & E1000_TX_FLAGS_TSO) {
4743                 txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D |
4744                              E1000_TXD_CMD_TSE;
4745                 txd_upper |= E1000_TXD_POPTS_TXSM << 8;
4746
4747                 if (tx_flags & E1000_TX_FLAGS_IPV4)
4748                         txd_upper |= E1000_TXD_POPTS_IXSM << 8;
4749         }
4750
4751         if (tx_flags & E1000_TX_FLAGS_CSUM) {
4752                 txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D;
4753                 txd_upper |= E1000_TXD_POPTS_TXSM << 8;
4754         }
4755
4756         if (tx_flags & E1000_TX_FLAGS_VLAN) {
4757                 txd_lower |= E1000_TXD_CMD_VLE;
4758                 txd_upper |= (tx_flags & E1000_TX_FLAGS_VLAN_MASK);
4759         }
4760
4761         i = tx_ring->next_to_use;
4762
4763         do {
4764                 buffer_info = &tx_ring->buffer_info[i];
4765                 tx_desc = E1000_TX_DESC(*tx_ring, i);
4766                 tx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
4767                 tx_desc->lower.data =
4768                         cpu_to_le32(txd_lower | buffer_info->length);
4769                 tx_desc->upper.data = cpu_to_le32(txd_upper);
4770
4771                 i++;
4772                 if (i == tx_ring->count)
4773                         i = 0;
4774         } while (--count > 0);
4775
4776         tx_desc->lower.data |= cpu_to_le32(adapter->txd_cmd);
4777
4778         /*
4779          * Force memory writes to complete before letting h/w
4780          * know there are new descriptors to fetch.  (Only
4781          * applicable for weak-ordered memory model archs,
4782          * such as IA-64).
4783          */
4784         wmb();
4785
4786         tx_ring->next_to_use = i;
4787
4788         if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
4789                 e1000e_update_tdt_wa(adapter, i);
4790         else
4791                 writel(i, adapter->hw.hw_addr + tx_ring->tail);
4792
4793         /*
4794          * we need this if more than one processor can write to our tail
4795          * at a time, it synchronizes IO on IA64/Altix systems
4796          */
4797         mmiowb();
4798 }
4799
4800 #define MINIMUM_DHCP_PACKET_SIZE 282
4801 static int e1000_transfer_dhcp_info(struct e1000_adapter *adapter,
4802                                     struct sk_buff *skb)
4803 {
4804         struct e1000_hw *hw =  &adapter->hw;
4805         u16 length, offset;
4806
4807         if (vlan_tx_tag_present(skb)) {
4808                 if (!((vlan_tx_tag_get(skb) == adapter->hw.mng_cookie.vlan_id) &&
4809                     (adapter->hw.mng_cookie.status &
4810                         E1000_MNG_DHCP_COOKIE_STATUS_VLAN)))
4811                         return 0;
4812         }
4813
4814         if (skb->len <= MINIMUM_DHCP_PACKET_SIZE)
4815                 return 0;
4816
4817         if (((struct ethhdr *) skb->data)->h_proto != htons(ETH_P_IP))
4818                 return 0;
4819
4820         {
4821                 const struct iphdr *ip = (struct iphdr *)((u8 *)skb->data+14);
4822                 struct udphdr *udp;
4823
4824                 if (ip->protocol != IPPROTO_UDP)
4825                         return 0;
4826
4827                 udp = (struct udphdr *)((u8 *)ip + (ip->ihl << 2));
4828                 if (ntohs(udp->dest) != 67)
4829                         return 0;
4830
4831                 offset = (u8 *)udp + 8 - skb->data;
4832                 length = skb->len - offset;
4833                 return e1000e_mng_write_dhcp_info(hw, (u8 *)udp + 8, length);
4834         }
4835
4836         return 0;
4837 }
4838
4839 static int __e1000_maybe_stop_tx(struct net_device *netdev, int size)
4840 {
4841         struct e1000_adapter *adapter = netdev_priv(netdev);
4842
4843         netif_stop_queue(netdev);
4844         /*
4845          * Herbert's original patch had:
4846          *  smp_mb__after_netif_stop_queue();
4847          * but since that doesn't exist yet, just open code it.
4848          */
4849         smp_mb();
4850
4851         /*
4852          * We need to check again in a case another CPU has just
4853          * made room available.
4854          */
4855         if (e1000_desc_unused(adapter->tx_ring) < size)
4856                 return -EBUSY;
4857
4858         /* A reprieve! */
4859         netif_start_queue(netdev);
4860         ++adapter->restart_queue;
4861         return 0;
4862 }
4863
4864 static int e1000_maybe_stop_tx(struct net_device *netdev, int size)
4865 {
4866         struct e1000_adapter *adapter = netdev_priv(netdev);
4867
4868         if (e1000_desc_unused(adapter->tx_ring) >= size)
4869                 return 0;
4870         return __e1000_maybe_stop_tx(netdev, size);
4871 }
4872
4873 #define TXD_USE_COUNT(S, X) (((S) >> (X)) + 1 )
4874 static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
4875                                     struct net_device *netdev)
4876 {
4877         struct e1000_adapter *adapter = netdev_priv(netdev);
4878         struct e1000_ring *tx_ring = adapter->tx_ring;
4879         unsigned int first;
4880         unsigned int max_per_txd = E1000_MAX_PER_TXD;
4881         unsigned int max_txd_pwr = E1000_MAX_TXD_PWR;
4882         unsigned int tx_flags = 0;
4883         unsigned int len = skb_headlen(skb);
4884         unsigned int nr_frags;
4885         unsigned int mss;
4886         int count = 0;
4887         int tso;
4888         unsigned int f;
4889
4890         if (test_bit(__E1000_DOWN, &adapter->state)) {
4891                 dev_kfree_skb_any(skb);
4892                 return NETDEV_TX_OK;
4893         }
4894
4895         if (skb->len <= 0) {
4896                 dev_kfree_skb_any(skb);
4897                 return NETDEV_TX_OK;
4898         }
4899
4900         mss = skb_shinfo(skb)->gso_size;
4901         /*
4902          * The controller does a simple calculation to
4903          * make sure there is enough room in the FIFO before
4904          * initiating the DMA for each buffer.  The calc is:
4905          * 4 = ceil(buffer len/mss).  To make sure we don't
4906          * overrun the FIFO, adjust the max buffer len if mss
4907          * drops.
4908          */
4909         if (mss) {
4910                 u8 hdr_len;
4911                 max_per_txd = min(mss << 2, max_per_txd);
4912                 max_txd_pwr = fls(max_per_txd) - 1;
4913
4914                 /*
4915                  * TSO Workaround for 82571/2/3 Controllers -- if skb->data
4916                  * points to just header, pull a few bytes of payload from
4917                  * frags into skb->data
4918                  */
4919                 hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
4920                 /*
4921                  * we do this workaround for ES2LAN, but it is un-necessary,
4922                  * avoiding it could save a lot of cycles
4923                  */
4924                 if (skb->data_len && (hdr_len == len)) {
4925                         unsigned int pull_size;
4926
4927                         pull_size = min((unsigned int)4, skb->data_len);
4928                         if (!__pskb_pull_tail(skb, pull_size)) {
4929                                 e_err("__pskb_pull_tail failed.\n");
4930                                 dev_kfree_skb_any(skb);
4931                                 return NETDEV_TX_OK;
4932                         }
4933                         len = skb_headlen(skb);
4934                 }
4935         }
4936
4937         /* reserve a descriptor for the offload context */
4938         if ((mss) || (skb->ip_summed == CHECKSUM_PARTIAL))
4939                 count++;
4940         count++;
4941
4942         count += TXD_USE_COUNT(len, max_txd_pwr);
4943
4944         nr_frags = skb_shinfo(skb)->nr_frags;
4945         for (f = 0; f < nr_frags; f++)
4946                 count += TXD_USE_COUNT(skb_frag_size(&skb_shinfo(skb)->frags[f]),
4947                                        max_txd_pwr);
4948
4949         if (adapter->hw.mac.tx_pkt_filtering)
4950                 e1000_transfer_dhcp_info(adapter, skb);
4951
4952         /*
4953          * need: count + 2 desc gap to keep tail from touching
4954          * head, otherwise try next time
4955          */
4956         if (e1000_maybe_stop_tx(netdev, count + 2))
4957                 return NETDEV_TX_BUSY;
4958
4959         if (vlan_tx_tag_present(skb)) {
4960                 tx_flags |= E1000_TX_FLAGS_VLAN;
4961                 tx_flags |= (vlan_tx_tag_get(skb) << E1000_TX_FLAGS_VLAN_SHIFT);
4962         }
4963
4964         first = tx_ring->next_to_use;
4965
4966         tso = e1000_tso(adapter, skb);
4967         if (tso < 0) {
4968                 dev_kfree_skb_any(skb);
4969                 return NETDEV_TX_OK;
4970         }
4971
4972         if (tso)
4973                 tx_flags |= E1000_TX_FLAGS_TSO;
4974         else if (e1000_tx_csum(adapter, skb))
4975                 tx_flags |= E1000_TX_FLAGS_CSUM;
4976
4977         /*
4978          * Old method was to assume IPv4 packet by default if TSO was enabled.
4979          * 82571 hardware supports TSO capabilities for IPv6 as well...
4980          * no longer assume, we must.
4981          */
4982         if (skb->protocol == htons(ETH_P_IP))
4983                 tx_flags |= E1000_TX_FLAGS_IPV4;
4984
4985         /* if count is 0 then mapping error has occurred */
4986         count = e1000_tx_map(adapter, skb, first, max_per_txd, nr_frags, mss);
4987         if (count) {
4988                 e1000_tx_queue(adapter, tx_flags, count);
4989                 /* Make sure there is space in the ring for the next send. */
4990                 e1000_maybe_stop_tx(netdev, MAX_SKB_FRAGS + 2);
4991
4992         } else {
4993                 dev_kfree_skb_any(skb);
4994                 tx_ring->buffer_info[first].time_stamp = 0;
4995                 tx_ring->next_to_use = first;
4996         }
4997
4998         return NETDEV_TX_OK;
4999 }
5000
5001 /**
5002  * e1000_tx_timeout - Respond to a Tx Hang
5003  * @netdev: network interface device structure
5004  **/
5005 static void e1000_tx_timeout(struct net_device *netdev)
5006 {
5007         struct e1000_adapter *adapter = netdev_priv(netdev);
5008
5009         /* Do the reset outside of interrupt context */
5010         adapter->tx_timeout_count++;
5011         schedule_work(&adapter->reset_task);
5012 }
5013
5014 static void e1000_reset_task(struct work_struct *work)
5015 {
5016         struct e1000_adapter *adapter;
5017         adapter = container_of(work, struct e1000_adapter, reset_task);
5018
5019         /* don't run the task if already down */
5020         if (test_bit(__E1000_DOWN, &adapter->state))
5021                 return;
5022
5023         if (!((adapter->flags & FLAG_RX_NEEDS_RESTART) &&
5024               (adapter->flags & FLAG_RX_RESTART_NOW))) {
5025                 e1000e_dump(adapter);
5026                 e_err("Reset adapter\n");
5027         }
5028         e1000e_reinit_locked(adapter);
5029 }
5030
5031 /**
5032  * e1000_get_stats64 - Get System Network Statistics
5033  * @netdev: network interface device structure
5034  * @stats: rtnl_link_stats64 pointer
5035  *
5036  * Returns the address of the device statistics structure.
5037  **/
5038 struct rtnl_link_stats64 *e1000e_get_stats64(struct net_device *netdev,
5039                                              struct rtnl_link_stats64 *stats)
5040 {
5041         struct e1000_adapter *adapter = netdev_priv(netdev);
5042
5043         memset(stats, 0, sizeof(struct rtnl_link_stats64));
5044         spin_lock(&adapter->stats64_lock);
5045         e1000e_update_stats(adapter);
5046         /* Fill out the OS statistics structure */
5047         stats->rx_bytes = adapter->stats.gorc;
5048         stats->rx_packets = adapter->stats.gprc;
5049         stats->tx_bytes = adapter->stats.gotc;
5050         stats->tx_packets = adapter->stats.gptc;
5051         stats->multicast = adapter->stats.mprc;
5052         stats->collisions = adapter->stats.colc;
5053
5054         /* Rx Errors */
5055
5056         /*
5057          * RLEC on some newer hardware can be incorrect so build
5058          * our own version based on RUC and ROC
5059          */
5060         stats->rx_errors = adapter->stats.rxerrc +
5061                 adapter->stats.crcerrs + adapter->stats.algnerrc +
5062                 adapter->stats.ruc + adapter->stats.roc +
5063                 adapter->stats.cexterr;
5064         stats->rx_length_errors = adapter->stats.ruc +
5065                                               adapter->stats.roc;
5066         stats->rx_crc_errors = adapter->stats.crcerrs;
5067         stats->rx_frame_errors = adapter->stats.algnerrc;
5068         stats->rx_missed_errors = adapter->stats.mpc;
5069
5070         /* Tx Errors */
5071         stats->tx_errors = adapter->stats.ecol +
5072                                        adapter->stats.latecol;
5073         stats->tx_aborted_errors = adapter->stats.ecol;
5074         stats->tx_window_errors = adapter->stats.latecol;
5075         stats->tx_carrier_errors = adapter->stats.tncrs;
5076
5077         /* Tx Dropped needs to be maintained elsewhere */
5078
5079         spin_unlock(&adapter->stats64_lock);
5080         return stats;
5081 }
5082
5083 /**
5084  * e1000_change_mtu - Change the Maximum Transfer Unit
5085  * @netdev: network interface device structure
5086  * @new_mtu: new value for maximum frame size
5087  *
5088  * Returns 0 on success, negative on failure
5089  **/
5090 static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
5091 {
5092         struct e1000_adapter *adapter = netdev_priv(netdev);
5093         int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN;
5094
5095         /* Jumbo frame support */
5096         if ((max_frame > ETH_FRAME_LEN + ETH_FCS_LEN) &&
5097             !(adapter->flags & FLAG_HAS_JUMBO_FRAMES)) {
5098                 e_err("Jumbo Frames not supported.\n");
5099                 return -EINVAL;
5100         }
5101
5102         /* Supported frame sizes */
5103         if ((new_mtu < ETH_ZLEN + ETH_FCS_LEN + VLAN_HLEN) ||
5104             (max_frame > adapter->max_hw_frame_size)) {
5105                 e_err("Unsupported MTU setting\n");
5106                 return -EINVAL;
5107         }
5108
5109         /* Jumbo frame workaround on 82579 requires CRC be stripped */
5110         if ((adapter->hw.mac.type == e1000_pch2lan) &&
5111             !(adapter->flags2 & FLAG2_CRC_STRIPPING) &&
5112             (new_mtu > ETH_DATA_LEN)) {
5113                 e_err("Jumbo Frames not supported on 82579 when CRC "
5114                       "stripping is disabled.\n");
5115                 return -EINVAL;
5116         }
5117
5118         /* 82573 Errata 17 */
5119         if (((adapter->hw.mac.type == e1000_82573) ||
5120              (adapter->hw.mac.type == e1000_82574)) &&
5121             (max_frame > ETH_FRAME_LEN + ETH_FCS_LEN)) {
5122                 adapter->flags2 |= FLAG2_DISABLE_ASPM_L1;
5123                 e1000e_disable_aspm(adapter->pdev, PCIE_LINK_STATE_L1);
5124         }
5125
5126         while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
5127                 usleep_range(1000, 2000);
5128         /* e1000e_down -> e1000e_reset dependent on max_frame_size & mtu */
5129         adapter->max_frame_size = max_frame;
5130         e_info("changing MTU from %d to %d\n", netdev->mtu, new_mtu);
5131         netdev->mtu = new_mtu;
5132         if (netif_running(netdev))
5133                 e1000e_down(adapter);
5134
5135         /*
5136          * NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN
5137          * means we reserve 2 more, this pushes us to allocate from the next
5138          * larger slab size.
5139          * i.e. RXBUFFER_2048 --> size-4096 slab
5140          * However with the new *_jumbo_rx* routines, jumbo receives will use
5141          * fragmented skbs
5142          */
5143
5144         if (max_frame <= 2048)
5145                 adapter->rx_buffer_len = 2048;
5146         else
5147                 adapter->rx_buffer_len = 4096;
5148
5149         /* adjust allocation if LPE protects us, and we aren't using SBP */
5150         if ((max_frame == ETH_FRAME_LEN + ETH_FCS_LEN) ||
5151              (max_frame == ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN))
5152                 adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN
5153                                          + ETH_FCS_LEN;
5154
5155         if (netif_running(netdev))
5156                 e1000e_up(adapter);
5157         else
5158                 e1000e_reset(adapter);
5159
5160         clear_bit(__E1000_RESETTING, &adapter->state);
5161
5162         return 0;
5163 }
5164
5165 static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr,
5166                            int cmd)
5167 {
5168         struct e1000_adapter *adapter = netdev_priv(netdev);
5169         struct mii_ioctl_data *data = if_mii(ifr);
5170
5171         if (adapter->hw.phy.media_type != e1000_media_type_copper)
5172                 return -EOPNOTSUPP;
5173
5174         switch (cmd) {
5175         case SIOCGMIIPHY:
5176                 data->phy_id = adapter->hw.phy.addr;
5177                 break;
5178         case SIOCGMIIREG:
5179                 e1000_phy_read_status(adapter);
5180
5181                 switch (data->reg_num & 0x1F) {
5182                 case MII_BMCR:
5183                         data->val_out = adapter->phy_regs.bmcr;
5184                         break;
5185                 case MII_BMSR:
5186                         data->val_out = adapter->phy_regs.bmsr;
5187                         break;
5188                 case MII_PHYSID1:
5189                         data->val_out = (adapter->hw.phy.id >> 16);
5190                         break;
5191                 case MII_PHYSID2:
5192                         data->val_out = (adapter->hw.phy.id & 0xFFFF);
5193                         break;
5194                 case MII_ADVERTISE:
5195                         data->val_out = adapter->phy_regs.advertise;
5196                         break;
5197                 case MII_LPA:
5198                         data->val_out = adapter->phy_regs.lpa;
5199                         break;
5200                 case MII_EXPANSION:
5201                         data->val_out = adapter->phy_regs.expansion;
5202                         break;
5203                 case MII_CTRL1000:
5204                         data->val_out = adapter->phy_regs.ctrl1000;
5205                         break;
5206                 case MII_STAT1000:
5207                         data->val_out = adapter->phy_regs.stat1000;
5208                         break;
5209                 case MII_ESTATUS:
5210                         data->val_out = adapter->phy_regs.estatus;
5211                         break;
5212                 default:
5213                         return -EIO;
5214                 }
5215                 break;
5216         case SIOCSMIIREG:
5217         default:
5218                 return -EOPNOTSUPP;
5219         }
5220         return 0;
5221 }
5222
5223 static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
5224 {
5225         switch (cmd) {
5226         case SIOCGMIIPHY:
5227         case SIOCGMIIREG:
5228         case SIOCSMIIREG:
5229                 return e1000_mii_ioctl(netdev, ifr, cmd);
5230         default:
5231                 return -EOPNOTSUPP;
5232         }
5233 }
5234
5235 static int e1000_init_phy_wakeup(struct e1000_adapter *adapter, u32 wufc)
5236 {
5237         struct e1000_hw *hw = &adapter->hw;
5238         u32 i, mac_reg;
5239         u16 phy_reg, wuc_enable;
5240         int retval = 0;
5241
5242         /* copy MAC RARs to PHY RARs */
5243         e1000_copy_rx_addrs_to_phy_ich8lan(hw);
5244
5245         retval = hw->phy.ops.acquire(hw);
5246         if (retval) {
5247                 e_err("Could not acquire PHY\n");
5248                 return retval;
5249         }
5250
5251         /* Enable access to wakeup registers on and set page to BM_WUC_PAGE */
5252         retval = e1000_enable_phy_wakeup_reg_access_bm(hw, &wuc_enable);
5253         if (retval)
5254                 goto out;
5255
5256         /* copy MAC MTA to PHY MTA - only needed for pchlan */
5257         for (i = 0; i < adapter->hw.mac.mta_reg_count; i++) {
5258                 mac_reg = E1000_READ_REG_ARRAY(hw, E1000_MTA, i);
5259                 hw->phy.ops.write_reg_page(hw, BM_MTA(i),
5260                                            (u16)(mac_reg & 0xFFFF));
5261                 hw->phy.ops.write_reg_page(hw, BM_MTA(i) + 1,
5262                                            (u16)((mac_reg >> 16) & 0xFFFF));
5263         }
5264
5265         /* configure PHY Rx Control register */
5266         hw->phy.ops.read_reg_page(&adapter->hw, BM_RCTL, &phy_reg);
5267         mac_reg = er32(RCTL);
5268         if (mac_reg & E1000_RCTL_UPE)
5269                 phy_reg |= BM_RCTL_UPE;
5270         if (mac_reg & E1000_RCTL_MPE)
5271                 phy_reg |= BM_RCTL_MPE;
5272         phy_reg &= ~(BM_RCTL_MO_MASK);
5273         if (mac_reg & E1000_RCTL_MO_3)
5274                 phy_reg |= (((mac_reg & E1000_RCTL_MO_3) >> E1000_RCTL_MO_SHIFT)
5275                                 << BM_RCTL_MO_SHIFT);
5276         if (mac_reg & E1000_RCTL_BAM)
5277                 phy_reg |= BM_RCTL_BAM;
5278         if (mac_reg & E1000_RCTL_PMCF)
5279                 phy_reg |= BM_RCTL_PMCF;
5280         mac_reg = er32(CTRL);
5281         if (mac_reg & E1000_CTRL_RFCE)
5282                 phy_reg |= BM_RCTL_RFCE;
5283         hw->phy.ops.write_reg_page(&adapter->hw, BM_RCTL, phy_reg);
5284
5285         /* enable PHY wakeup in MAC register */
5286         ew32(WUFC, wufc);
5287         ew32(WUC, E1000_WUC_PHY_WAKE | E1000_WUC_PME_EN);
5288
5289         /* configure and enable PHY wakeup in PHY registers */
5290         hw->phy.ops.write_reg_page(&adapter->hw, BM_WUFC, wufc);
5291         hw->phy.ops.write_reg_page(&adapter->hw, BM_WUC, E1000_WUC_PME_EN);
5292
5293         /* activate PHY wakeup */
5294         wuc_enable |= BM_WUC_ENABLE_BIT | BM_WUC_HOST_WU_BIT;
5295         retval = e1000_disable_phy_wakeup_reg_access_bm(hw, &wuc_enable);
5296         if (retval)
5297                 e_err("Could not set PHY Host Wakeup bit\n");
5298 out:
5299         hw->phy.ops.release(hw);
5300
5301         return retval;
5302 }
5303
5304 static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake,
5305                             bool runtime)
5306 {
5307         struct net_device *netdev = pci_get_drvdata(pdev);
5308         struct e1000_adapter *adapter = netdev_priv(netdev);
5309         struct e1000_hw *hw = &adapter->hw;
5310         u32 ctrl, ctrl_ext, rctl, status;
5311         /* Runtime suspend should only enable wakeup for link changes */
5312         u32 wufc = runtime ? E1000_WUFC_LNKC : adapter->wol;
5313         int retval = 0;
5314
5315         netif_device_detach(netdev);
5316
5317         if (netif_running(netdev)) {
5318                 WARN_ON(test_bit(__E1000_RESETTING, &adapter->state));
5319                 e1000e_down(adapter);
5320                 e1000_free_irq(adapter);
5321         }
5322         e1000e_reset_interrupt_capability(adapter);
5323
5324         retval = pci_save_state(pdev);
5325         if (retval)
5326                 return retval;
5327
5328         status = er32(STATUS);
5329         if (status & E1000_STATUS_LU)
5330                 wufc &= ~E1000_WUFC_LNKC;
5331
5332         if (wufc) {
5333                 e1000_setup_rctl(adapter);
5334                 e1000_set_multi(netdev);
5335
5336                 /* turn on all-multi mode if wake on multicast is enabled */
5337                 if (wufc & E1000_WUFC_MC) {
5338                         rctl = er32(RCTL);
5339                         rctl |= E1000_RCTL_MPE;
5340                         ew32(RCTL, rctl);
5341                 }
5342
5343                 ctrl = er32(CTRL);
5344                 /* advertise wake from D3Cold */
5345                 #define E1000_CTRL_ADVD3WUC 0x00100000
5346                 /* phy power management enable */
5347                 #define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000
5348                 ctrl |= E1000_CTRL_ADVD3WUC;
5349                 if (!(adapter->flags2 & FLAG2_HAS_PHY_WAKEUP))
5350                         ctrl |= E1000_CTRL_EN_PHY_PWR_MGMT;
5351                 ew32(CTRL, ctrl);
5352
5353                 if (adapter->hw.phy.media_type == e1000_media_type_fiber ||
5354                     adapter->hw.phy.media_type ==
5355                     e1000_media_type_internal_serdes) {
5356                         /* keep the laser running in D3 */
5357                         ctrl_ext = er32(CTRL_EXT);
5358                         ctrl_ext |= E1000_CTRL_EXT_SDP3_DATA;
5359                         ew32(CTRL_EXT, ctrl_ext);
5360                 }
5361
5362                 if (adapter->flags & FLAG_IS_ICH)
5363                         e1000_suspend_workarounds_ich8lan(&adapter->hw);
5364
5365                 /* Allow time for pending master requests to run */
5366                 e1000e_disable_pcie_master(&adapter->hw);
5367
5368                 if (adapter->flags2 & FLAG2_HAS_PHY_WAKEUP) {
5369                         /* enable wakeup by the PHY */
5370                         retval = e1000_init_phy_wakeup(adapter, wufc);
5371                         if (retval)
5372                                 return retval;
5373                 } else {
5374                         /* enable wakeup by the MAC */
5375                         ew32(WUFC, wufc);
5376                         ew32(WUC, E1000_WUC_PME_EN);
5377                 }
5378         } else {
5379                 ew32(WUC, 0);
5380                 ew32(WUFC, 0);
5381         }
5382
5383         *enable_wake = !!wufc;
5384
5385         /* make sure adapter isn't asleep if manageability is enabled */
5386         if ((adapter->flags & FLAG_MNG_PT_ENABLED) ||
5387             (hw->mac.ops.check_mng_mode(hw)))
5388                 *enable_wake = true;
5389
5390         if (adapter->hw.phy.type == e1000_phy_igp_3)
5391                 e1000e_igp3_phy_powerdown_workaround_ich8lan(&adapter->hw);
5392
5393         /*
5394          * Release control of h/w to f/w.  If f/w is AMT enabled, this
5395          * would have already happened in close and is redundant.
5396          */
5397         e1000e_release_hw_control(adapter);
5398
5399         pci_disable_device(pdev);
5400
5401         return 0;
5402 }
5403
5404 static void e1000_power_off(struct pci_dev *pdev, bool sleep, bool wake)
5405 {
5406         if (sleep && wake) {
5407                 pci_prepare_to_sleep(pdev);
5408                 return;
5409         }
5410
5411         pci_wake_from_d3(pdev, wake);
5412         pci_set_power_state(pdev, PCI_D3hot);
5413 }
5414
5415 static void e1000_complete_shutdown(struct pci_dev *pdev, bool sleep,
5416                                     bool wake)
5417 {
5418         struct net_device *netdev = pci_get_drvdata(pdev);
5419         struct e1000_adapter *adapter = netdev_priv(netdev);
5420
5421         /*
5422          * The pci-e switch on some quad port adapters will report a
5423          * correctable error when the MAC transitions from D0 to D3.  To
5424          * prevent this we need to mask off the correctable errors on the
5425          * downstream port of the pci-e switch.
5426          */
5427         if (adapter->flags & FLAG_IS_QUAD_PORT) {
5428                 struct pci_dev *us_dev = pdev->bus->self;
5429                 int pos = pci_pcie_cap(us_dev);
5430                 u16 devctl;
5431
5432                 pci_read_config_word(us_dev, pos + PCI_EXP_DEVCTL, &devctl);
5433                 pci_write_config_word(us_dev, pos + PCI_EXP_DEVCTL,
5434                                       (devctl & ~PCI_EXP_DEVCTL_CERE));
5435
5436                 e1000_power_off(pdev, sleep, wake);
5437
5438                 pci_write_config_word(us_dev, pos + PCI_EXP_DEVCTL, devctl);
5439         } else {
5440                 e1000_power_off(pdev, sleep, wake);
5441         }
5442 }
5443
5444 #ifdef CONFIG_PCIEASPM
5445 static void __e1000e_disable_aspm(struct pci_dev *pdev, u16 state)
5446 {
5447         pci_disable_link_state_locked(pdev, state);
5448 }
5449 #else
5450 static void __e1000e_disable_aspm(struct pci_dev *pdev, u16 state)
5451 {
5452         int pos;
5453         u16 reg16;
5454
5455         /*
5456          * Both device and parent should have the same ASPM setting.
5457          * Disable ASPM in downstream component first and then upstream.
5458          */
5459         pos = pci_pcie_cap(pdev);
5460         pci_read_config_word(pdev, pos + PCI_EXP_LNKCTL, &reg16);
5461         reg16 &= ~state;
5462         pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, reg16);
5463
5464         if (!pdev->bus->self)
5465                 return;
5466
5467         pos = pci_pcie_cap(pdev->bus->self);
5468         pci_read_config_word(pdev->bus->self, pos + PCI_EXP_LNKCTL, &reg16);
5469         reg16 &= ~state;
5470         pci_write_config_word(pdev->bus->self, pos + PCI_EXP_LNKCTL, reg16);
5471 }
5472 #endif
5473 static void e1000e_disable_aspm(struct pci_dev *pdev, u16 state)
5474 {
5475         dev_info(&pdev->dev, "Disabling ASPM %s %s\n",
5476                  (state & PCIE_LINK_STATE_L0S) ? "L0s" : "",
5477                  (state & PCIE_LINK_STATE_L1) ? "L1" : "");
5478
5479         __e1000e_disable_aspm(pdev, state);
5480 }
5481
5482 #ifdef CONFIG_PM
5483 static bool e1000e_pm_ready(struct e1000_adapter *adapter)
5484 {
5485         return !!adapter->tx_ring->buffer_info;
5486 }
5487
5488 static int __e1000_resume(struct pci_dev *pdev)
5489 {
5490         struct net_device *netdev = pci_get_drvdata(pdev);
5491         struct e1000_adapter *adapter = netdev_priv(netdev);
5492         struct e1000_hw *hw = &adapter->hw;
5493         u16 aspm_disable_flag = 0;
5494         u32 err;
5495
5496         if (adapter->flags2 & FLAG2_DISABLE_ASPM_L0S)
5497                 aspm_disable_flag = PCIE_LINK_STATE_L0S;
5498         if (adapter->flags2 & FLAG2_DISABLE_ASPM_L1)
5499                 aspm_disable_flag |= PCIE_LINK_STATE_L1;
5500         if (aspm_disable_flag)
5501                 e1000e_disable_aspm(pdev, aspm_disable_flag);
5502
5503         pci_set_power_state(pdev, PCI_D0);
5504         pci_restore_state(pdev);
5505         pci_save_state(pdev);
5506
5507         e1000e_set_interrupt_capability(adapter);
5508         if (netif_running(netdev)) {
5509                 err = e1000_request_irq(adapter);
5510                 if (err)
5511                         return err;
5512         }
5513
5514         if (hw->mac.type == e1000_pch2lan)
5515                 e1000_resume_workarounds_pchlan(&adapter->hw);
5516
5517         e1000e_power_up_phy(adapter);
5518
5519         /* report the system wakeup cause from S3/S4 */
5520         if (adapter->flags2 & FLAG2_HAS_PHY_WAKEUP) {
5521                 u16 phy_data;
5522
5523                 e1e_rphy(&adapter->hw, BM_WUS, &phy_data);
5524                 if (phy_data) {
5525                         e_info("PHY Wakeup cause - %s\n",
5526                                 phy_data & E1000_WUS_EX ? "Unicast Packet" :
5527                                 phy_data & E1000_WUS_MC ? "Multicast Packet" :
5528                                 phy_data & E1000_WUS_BC ? "Broadcast Packet" :
5529                                 phy_data & E1000_WUS_MAG ? "Magic Packet" :
5530                                 phy_data & E1000_WUS_LNKC ? "Link Status "
5531                                 " Change" : "other");
5532                 }
5533                 e1e_wphy(&adapter->hw, BM_WUS, ~0);
5534         } else {
5535                 u32 wus = er32(WUS);
5536                 if (wus) {
5537                         e_info("MAC Wakeup cause - %s\n",
5538                                 wus & E1000_WUS_EX ? "Unicast Packet" :
5539                                 wus & E1000_WUS_MC ? "Multicast Packet" :
5540                                 wus & E1000_WUS_BC ? "Broadcast Packet" :
5541                                 wus & E1000_WUS_MAG ? "Magic Packet" :
5542                                 wus & E1000_WUS_LNKC ? "Link Status Change" :
5543                                 "other");
5544                 }
5545                 ew32(WUS, ~0);
5546         }
5547
5548         e1000e_reset(adapter);
5549
5550         e1000_init_manageability_pt(adapter);
5551
5552         if (netif_running(netdev))
5553                 e1000e_up(adapter);
5554
5555         netif_device_attach(netdev);
5556
5557         /*
5558          * If the controller has AMT, do not set DRV_LOAD until the interface
5559          * is up.  For all other cases, let the f/w know that the h/w is now
5560          * under the control of the driver.
5561          */
5562         if (!(adapter->flags & FLAG_HAS_AMT))
5563                 e1000e_get_hw_control(adapter);
5564
5565         return 0;
5566 }
5567
5568 #ifdef CONFIG_PM_SLEEP
5569 static int e1000_suspend(struct device *dev)
5570 {
5571         struct pci_dev *pdev = to_pci_dev(dev);
5572         int retval;
5573         bool wake;
5574
5575         retval = __e1000_shutdown(pdev, &wake, false);
5576         if (!retval)
5577                 e1000_complete_shutdown(pdev, true, wake);
5578
5579         return retval;
5580 }
5581
5582 static int e1000_resume(struct device *dev)
5583 {
5584         struct pci_dev *pdev = to_pci_dev(dev);
5585         struct net_device *netdev = pci_get_drvdata(pdev);
5586         struct e1000_adapter *adapter = netdev_priv(netdev);
5587
5588         if (e1000e_pm_ready(adapter))
5589                 adapter->idle_check = true;
5590
5591         return __e1000_resume(pdev);
5592 }
5593 #endif /* CONFIG_PM_SLEEP */
5594
5595 #ifdef CONFIG_PM_RUNTIME
5596 static int e1000_runtime_suspend(struct device *dev)
5597 {
5598         struct pci_dev *pdev = to_pci_dev(dev);
5599         struct net_device *netdev = pci_get_drvdata(pdev);
5600         struct e1000_adapter *adapter = netdev_priv(netdev);
5601
5602         if (e1000e_pm_ready(adapter)) {
5603                 bool wake;
5604
5605                 __e1000_shutdown(pdev, &wake, true);
5606         }
5607
5608         return 0;
5609 }
5610
5611 static int e1000_idle(struct device *dev)
5612 {
5613         struct pci_dev *pdev = to_pci_dev(dev);
5614         struct net_device *netdev = pci_get_drvdata(pdev);
5615         struct e1000_adapter *adapter = netdev_priv(netdev);
5616
5617         if (!e1000e_pm_ready(adapter))
5618                 return 0;
5619
5620         if (adapter->idle_check) {
5621                 adapter->idle_check = false;
5622                 if (!e1000e_has_link(adapter))
5623                         pm_schedule_suspend(dev, MSEC_PER_SEC);
5624         }
5625
5626         return -EBUSY;
5627 }
5628
5629 static int e1000_runtime_resume(struct device *dev)
5630 {
5631         struct pci_dev *pdev = to_pci_dev(dev);
5632         struct net_device *netdev = pci_get_drvdata(pdev);
5633         struct e1000_adapter *adapter = netdev_priv(netdev);
5634
5635         if (!e1000e_pm_ready(adapter))
5636                 return 0;
5637
5638         adapter->idle_check = !dev->power.runtime_auto;
5639         return __e1000_resume(pdev);
5640 }
5641 #endif /* CONFIG_PM_RUNTIME */
5642 #endif /* CONFIG_PM */
5643
5644 static void e1000_shutdown(struct pci_dev *pdev)
5645 {
5646         bool wake = false;
5647
5648         __e1000_shutdown(pdev, &wake, false);
5649
5650         if (system_state == SYSTEM_POWER_OFF)
5651                 e1000_complete_shutdown(pdev, false, wake);
5652 }
5653
5654 #ifdef CONFIG_NET_POLL_CONTROLLER
5655
5656 static irqreturn_t e1000_intr_msix(int irq, void *data)
5657 {
5658         struct net_device *netdev = data;
5659         struct e1000_adapter *adapter = netdev_priv(netdev);
5660
5661         if (adapter->msix_entries) {
5662                 int vector, msix_irq;
5663
5664                 vector = 0;
5665                 msix_irq = adapter->msix_entries[vector].vector;
5666                 disable_irq(msix_irq);
5667                 e1000_intr_msix_rx(msix_irq, netdev);
5668                 enable_irq(msix_irq);
5669
5670                 vector++;
5671                 msix_irq = adapter->msix_entries[vector].vector;
5672                 disable_irq(msix_irq);
5673                 e1000_intr_msix_tx(msix_irq, netdev);
5674                 enable_irq(msix_irq);
5675
5676                 vector++;
5677                 msix_irq = adapter->msix_entries[vector].vector;
5678                 disable_irq(msix_irq);
5679                 e1000_msix_other(msix_irq, netdev);
5680                 enable_irq(msix_irq);
5681         }
5682
5683         return IRQ_HANDLED;
5684 }
5685
5686 /*
5687  * Polling 'interrupt' - used by things like netconsole to send skbs
5688  * without having to re-enable interrupts. It's not called while
5689  * the interrupt routine is executing.
5690  */
5691 static void e1000_netpoll(struct net_device *netdev)
5692 {
5693         struct e1000_adapter *adapter = netdev_priv(netdev);
5694
5695         switch (adapter->int_mode) {
5696         case E1000E_INT_MODE_MSIX:
5697                 e1000_intr_msix(adapter->pdev->irq, netdev);
5698                 break;
5699         case E1000E_INT_MODE_MSI:
5700                 disable_irq(adapter->pdev->irq);
5701                 e1000_intr_msi(adapter->pdev->irq, netdev);
5702                 enable_irq(adapter->pdev->irq);
5703                 break;
5704         default: /* E1000E_INT_MODE_LEGACY */
5705                 disable_irq(adapter->pdev->irq);
5706                 e1000_intr(adapter->pdev->irq, netdev);
5707                 enable_irq(adapter->pdev->irq);
5708                 break;
5709         }
5710 }
5711 #endif
5712
5713 /**
5714  * e1000_io_error_detected - called when PCI error is detected
5715  * @pdev: Pointer to PCI device
5716  * @state: The current pci connection state
5717  *
5718  * This function is called after a PCI bus error affecting
5719  * this device has been detected.
5720  */
5721 static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev,
5722                                                 pci_channel_state_t state)
5723 {
5724         struct net_device *netdev = pci_get_drvdata(pdev);
5725         struct e1000_adapter *adapter = netdev_priv(netdev);
5726
5727         netif_device_detach(netdev);
5728
5729         if (state == pci_channel_io_perm_failure)
5730                 return PCI_ERS_RESULT_DISCONNECT;
5731
5732         if (netif_running(netdev))
5733                 e1000e_down(adapter);
5734         pci_disable_device(pdev);
5735
5736         /* Request a slot slot reset. */
5737         return PCI_ERS_RESULT_NEED_RESET;
5738 }
5739
5740 /**
5741  * e1000_io_slot_reset - called after the pci bus has been reset.
5742  * @pdev: Pointer to PCI device
5743  *
5744  * Restart the card from scratch, as if from a cold-boot. Implementation
5745  * resembles the first-half of the e1000_resume routine.
5746  */
5747 static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev)
5748 {
5749         struct net_device *netdev = pci_get_drvdata(pdev);
5750         struct e1000_adapter *adapter = netdev_priv(netdev);
5751         struct e1000_hw *hw = &adapter->hw;
5752         u16 aspm_disable_flag = 0;
5753         int err;
5754         pci_ers_result_t result;
5755
5756         if (adapter->flags2 & FLAG2_DISABLE_ASPM_L0S)
5757                 aspm_disable_flag = PCIE_LINK_STATE_L0S;
5758         if (adapter->flags2 & FLAG2_DISABLE_ASPM_L1)
5759                 aspm_disable_flag |= PCIE_LINK_STATE_L1;
5760         if (aspm_disable_flag)
5761                 e1000e_disable_aspm(pdev, aspm_disable_flag);
5762
5763         err = pci_enable_device_mem(pdev);
5764         if (err) {
5765                 dev_err(&pdev->dev,
5766                         "Cannot re-enable PCI device after reset.\n");
5767                 result = PCI_ERS_RESULT_DISCONNECT;
5768         } else {
5769                 pci_set_master(pdev);
5770                 pdev->state_saved = true;
5771                 pci_restore_state(pdev);
5772
5773                 pci_enable_wake(pdev, PCI_D3hot, 0);
5774                 pci_enable_wake(pdev, PCI_D3cold, 0);
5775
5776                 e1000e_reset(adapter);
5777                 ew32(WUS, ~0);
5778                 result = PCI_ERS_RESULT_RECOVERED;
5779         }
5780
5781         pci_cleanup_aer_uncorrect_error_status(pdev);
5782
5783         return result;
5784 }
5785
5786 /**
5787  * e1000_io_resume - called when traffic can start flowing again.
5788  * @pdev: Pointer to PCI device
5789  *
5790  * This callback is called when the error recovery driver tells us that
5791  * its OK to resume normal operation. Implementation resembles the
5792  * second-half of the e1000_resume routine.
5793  */
5794 static void e1000_io_resume(struct pci_dev *pdev)
5795 {
5796         struct net_device *netdev = pci_get_drvdata(pdev);
5797         struct e1000_adapter *adapter = netdev_priv(netdev);
5798
5799         e1000_init_manageability_pt(adapter);
5800
5801         if (netif_running(netdev)) {
5802                 if (e1000e_up(adapter)) {
5803                         dev_err(&pdev->dev,
5804                                 "can't bring device back up after reset\n");
5805                         return;
5806                 }
5807         }
5808
5809         netif_device_attach(netdev);
5810
5811         /*
5812          * If the controller has AMT, do not set DRV_LOAD until the interface
5813          * is up.  For all other cases, let the f/w know that the h/w is now
5814          * under the control of the driver.
5815          */
5816         if (!(adapter->flags & FLAG_HAS_AMT))
5817                 e1000e_get_hw_control(adapter);
5818
5819 }
5820
5821 static void e1000_print_device_info(struct e1000_adapter *adapter)
5822 {
5823         struct e1000_hw *hw = &adapter->hw;
5824         struct net_device *netdev = adapter->netdev;
5825         u32 ret_val;
5826         u8 pba_str[E1000_PBANUM_LENGTH];
5827
5828         /* print bus type/speed/width info */
5829         e_info("(PCI Express:2.5GT/s:%s) %pM\n",
5830                /* bus width */
5831                ((hw->bus.width == e1000_bus_width_pcie_x4) ? "Width x4" :
5832                 "Width x1"),
5833                /* MAC address */
5834                netdev->dev_addr);
5835         e_info("Intel(R) PRO/%s Network Connection\n",
5836                (hw->phy.type == e1000_phy_ife) ? "10/100" : "1000");
5837         ret_val = e1000_read_pba_string_generic(hw, pba_str,
5838                                                 E1000_PBANUM_LENGTH);
5839         if (ret_val)
5840                 strncpy((char *)pba_str, "Unknown", sizeof(pba_str) - 1);
5841         e_info("MAC: %d, PHY: %d, PBA No: %s\n",
5842                hw->mac.type, hw->phy.type, pba_str);
5843 }
5844
5845 static void e1000_eeprom_checks(struct e1000_adapter *adapter)
5846 {
5847         struct e1000_hw *hw = &adapter->hw;
5848         int ret_val;
5849         u16 buf = 0;
5850
5851         if (hw->mac.type != e1000_82573)
5852                 return;
5853
5854         ret_val = e1000_read_nvm(hw, NVM_INIT_CONTROL2_REG, 1, &buf);
5855         if (!ret_val && (!(le16_to_cpu(buf) & (1 << 0)))) {
5856                 /* Deep Smart Power Down (DSPD) */
5857                 dev_warn(&adapter->pdev->dev,
5858                          "Warning: detected DSPD enabled in EEPROM\n");
5859         }
5860 }
5861
5862 static int e1000_set_features(struct net_device *netdev, u32 features)
5863 {
5864         struct e1000_adapter *adapter = netdev_priv(netdev);
5865         u32 changed = features ^ netdev->features;
5866
5867         if (changed & (NETIF_F_TSO | NETIF_F_TSO6))
5868                 adapter->flags |= FLAG_TSO_FORCE;
5869
5870         if (!(changed & (NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_TX |
5871                          NETIF_F_RXCSUM)))
5872                 return 0;
5873
5874         if (netif_running(netdev))
5875                 e1000e_reinit_locked(adapter);
5876         else
5877                 e1000e_reset(adapter);
5878
5879         return 0;
5880 }
5881
5882 static const struct net_device_ops e1000e_netdev_ops = {
5883         .ndo_open               = e1000_open,
5884         .ndo_stop               = e1000_close,
5885         .ndo_start_xmit         = e1000_xmit_frame,
5886         .ndo_get_stats64        = e1000e_get_stats64,
5887         .ndo_set_rx_mode        = e1000_set_multi,
5888         .ndo_set_mac_address    = e1000_set_mac,
5889         .ndo_change_mtu         = e1000_change_mtu,
5890         .ndo_do_ioctl           = e1000_ioctl,
5891         .ndo_tx_timeout         = e1000_tx_timeout,
5892         .ndo_validate_addr      = eth_validate_addr,
5893
5894         .ndo_vlan_rx_add_vid    = e1000_vlan_rx_add_vid,
5895         .ndo_vlan_rx_kill_vid   = e1000_vlan_rx_kill_vid,
5896 #ifdef CONFIG_NET_POLL_CONTROLLER
5897         .ndo_poll_controller    = e1000_netpoll,
5898 #endif
5899         .ndo_set_features = e1000_set_features,
5900 };
5901
5902 /**
5903  * e1000_probe - Device Initialization Routine
5904  * @pdev: PCI device information struct
5905  * @ent: entry in e1000_pci_tbl
5906  *
5907  * Returns 0 on success, negative on failure
5908  *
5909  * e1000_probe initializes an adapter identified by a pci_dev structure.
5910  * The OS initialization, configuring of the adapter private structure,
5911  * and a hardware reset occur.
5912  **/
5913 static int __devinit e1000_probe(struct pci_dev *pdev,
5914                                  const struct pci_device_id *ent)
5915 {
5916         struct net_device *netdev;
5917         struct e1000_adapter *adapter;
5918         struct e1000_hw *hw;
5919         const struct e1000_info *ei = e1000_info_tbl[ent->driver_data];
5920         resource_size_t mmio_start, mmio_len;
5921         resource_size_t flash_start, flash_len;
5922
5923         static int cards_found;
5924         u16 aspm_disable_flag = 0;
5925         int i, err, pci_using_dac;
5926         u16 eeprom_data = 0;
5927         u16 eeprom_apme_mask = E1000_EEPROM_APME;
5928
5929         if (ei->flags2 & FLAG2_DISABLE_ASPM_L0S)
5930                 aspm_disable_flag = PCIE_LINK_STATE_L0S;
5931         if (ei->flags2 & FLAG2_DISABLE_ASPM_L1)
5932                 aspm_disable_flag |= PCIE_LINK_STATE_L1;
5933         if (aspm_disable_flag)
5934                 e1000e_disable_aspm(pdev, aspm_disable_flag);
5935
5936         err = pci_enable_device_mem(pdev);
5937         if (err)
5938                 return err;
5939
5940         pci_using_dac = 0;
5941         err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(64));
5942         if (!err) {
5943                 err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64));
5944                 if (!err)
5945                         pci_using_dac = 1;
5946         } else {
5947                 err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
5948                 if (err) {
5949                         err = dma_set_coherent_mask(&pdev->dev,
5950                                                     DMA_BIT_MASK(32));
5951                         if (err) {
5952                                 dev_err(&pdev->dev, "No usable DMA "
5953                                         "configuration, aborting\n");
5954                                 goto err_dma;
5955                         }
5956                 }
5957         }
5958
5959         err = pci_request_selected_regions_exclusive(pdev,
5960                                           pci_select_bars(pdev, IORESOURCE_MEM),
5961                                           e1000e_driver_name);
5962         if (err)
5963                 goto err_pci_reg;
5964
5965         /* AER (Advanced Error Reporting) hooks */
5966         pci_enable_pcie_error_reporting(pdev);
5967
5968         pci_set_master(pdev);
5969         /* PCI config space info */
5970         err = pci_save_state(pdev);
5971         if (err)
5972                 goto err_alloc_etherdev;
5973
5974         err = -ENOMEM;
5975         netdev = alloc_etherdev(sizeof(struct e1000_adapter));
5976         if (!netdev)
5977                 goto err_alloc_etherdev;
5978
5979         SET_NETDEV_DEV(netdev, &pdev->dev);
5980
5981         netdev->irq = pdev->irq;
5982
5983         pci_set_drvdata(pdev, netdev);
5984         adapter = netdev_priv(netdev);
5985         hw = &adapter->hw;
5986         adapter->netdev = netdev;
5987         adapter->pdev = pdev;
5988         adapter->ei = ei;
5989         adapter->pba = ei->pba;
5990         adapter->flags = ei->flags;
5991         adapter->flags2 = ei->flags2;
5992         adapter->hw.adapter = adapter;
5993         adapter->hw.mac.type = ei->mac;
5994         adapter->max_hw_frame_size = ei->max_hw_frame_size;
5995         adapter->msg_enable = (1 << NETIF_MSG_DRV | NETIF_MSG_PROBE) - 1;
5996
5997         mmio_start = pci_resource_start(pdev, 0);
5998         mmio_len = pci_resource_len(pdev, 0);
5999
6000         err = -EIO;
6001         adapter->hw.hw_addr = ioremap(mmio_start, mmio_len);
6002         if (!adapter->hw.hw_addr)
6003                 goto err_ioremap;
6004
6005         if ((adapter->flags & FLAG_HAS_FLASH) &&
6006             (pci_resource_flags(pdev, 1) & IORESOURCE_MEM)) {
6007                 flash_start = pci_resource_start(pdev, 1);
6008                 flash_len = pci_resource_len(pdev, 1);
6009                 adapter->hw.flash_address = ioremap(flash_start, flash_len);
6010                 if (!adapter->hw.flash_address)
6011                         goto err_flashmap;
6012         }
6013
6014         /* construct the net_device struct */
6015         netdev->netdev_ops              = &e1000e_netdev_ops;
6016         e1000e_set_ethtool_ops(netdev);
6017         netdev->watchdog_timeo          = 5 * HZ;
6018         netif_napi_add(netdev, &adapter->napi, e1000_clean, 64);
6019         strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1);
6020
6021         netdev->mem_start = mmio_start;
6022         netdev->mem_end = mmio_start + mmio_len;
6023
6024         adapter->bd_number = cards_found++;
6025
6026         e1000e_check_options(adapter);
6027
6028         /* setup adapter struct */
6029         err = e1000_sw_init(adapter);
6030         if (err)
6031                 goto err_sw_init;
6032
6033         memcpy(&hw->mac.ops, ei->mac_ops, sizeof(hw->mac.ops));
6034         memcpy(&hw->nvm.ops, ei->nvm_ops, sizeof(hw->nvm.ops));
6035         memcpy(&hw->phy.ops, ei->phy_ops, sizeof(hw->phy.ops));
6036
6037         err = ei->get_variants(adapter);
6038         if (err)
6039                 goto err_hw_init;
6040
6041         if ((adapter->flags & FLAG_IS_ICH) &&
6042             (adapter->flags & FLAG_READ_ONLY_NVM))
6043                 e1000e_write_protect_nvm_ich8lan(&adapter->hw);
6044
6045         hw->mac.ops.get_bus_info(&adapter->hw);
6046
6047         adapter->hw.phy.autoneg_wait_to_complete = 0;
6048
6049         /* Copper options */
6050         if (adapter->hw.phy.media_type == e1000_media_type_copper) {
6051                 adapter->hw.phy.mdix = AUTO_ALL_MODES;
6052                 adapter->hw.phy.disable_polarity_correction = 0;
6053                 adapter->hw.phy.ms_type = e1000_ms_hw_default;
6054         }
6055
6056         if (e1000_check_reset_block(&adapter->hw))
6057                 e_info("PHY reset is blocked due to SOL/IDER session.\n");
6058
6059         /* Set initial default active device features */
6060         netdev->features = (NETIF_F_SG |
6061                             NETIF_F_HW_VLAN_RX |
6062                             NETIF_F_HW_VLAN_TX |
6063                             NETIF_F_TSO |
6064                             NETIF_F_TSO6 |
6065                             NETIF_F_RXCSUM |
6066                             NETIF_F_HW_CSUM);
6067
6068         /* Set user-changeable features (subset of all device features) */
6069         netdev->hw_features = netdev->features;
6070
6071         if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER)
6072                 netdev->features |= NETIF_F_HW_VLAN_FILTER;
6073
6074         netdev->vlan_features |= (NETIF_F_SG |
6075                                   NETIF_F_TSO |
6076                                   NETIF_F_TSO6 |
6077                                   NETIF_F_HW_CSUM);
6078
6079         if (pci_using_dac) {
6080                 netdev->features |= NETIF_F_HIGHDMA;
6081                 netdev->vlan_features |= NETIF_F_HIGHDMA;
6082         }
6083
6084         if (e1000e_enable_mng_pass_thru(&adapter->hw))
6085                 adapter->flags |= FLAG_MNG_PT_ENABLED;
6086
6087         /*
6088          * before reading the NVM, reset the controller to
6089          * put the device in a known good starting state
6090          */
6091         adapter->hw.mac.ops.reset_hw(&adapter->hw);
6092
6093         /*
6094          * systems with ASPM and others may see the checksum fail on the first
6095          * attempt. Let's give it a few tries
6096          */
6097         for (i = 0;; i++) {
6098                 if (e1000_validate_nvm_checksum(&adapter->hw) >= 0)
6099                         break;
6100                 if (i == 2) {
6101                         e_err("The NVM Checksum Is Not Valid\n");
6102                         err = -EIO;
6103                         goto err_eeprom;
6104                 }
6105         }
6106
6107         e1000_eeprom_checks(adapter);
6108
6109         /* copy the MAC address */
6110         if (e1000e_read_mac_addr(&adapter->hw))
6111                 e_err("NVM Read Error while reading MAC address\n");
6112
6113         memcpy(netdev->dev_addr, adapter->hw.mac.addr, netdev->addr_len);
6114         memcpy(netdev->perm_addr, adapter->hw.mac.addr, netdev->addr_len);
6115
6116         if (!is_valid_ether_addr(netdev->perm_addr)) {
6117                 e_err("Invalid MAC Address: %pM\n", netdev->perm_addr);
6118                 err = -EIO;
6119                 goto err_eeprom;
6120         }
6121
6122         init_timer(&adapter->watchdog_timer);
6123         adapter->watchdog_timer.function = e1000_watchdog;
6124         adapter->watchdog_timer.data = (unsigned long) adapter;
6125
6126         init_timer(&adapter->phy_info_timer);
6127         adapter->phy_info_timer.function = e1000_update_phy_info;
6128         adapter->phy_info_timer.data = (unsigned long) adapter;
6129
6130         INIT_WORK(&adapter->reset_task, e1000_reset_task);
6131         INIT_WORK(&adapter->watchdog_task, e1000_watchdog_task);
6132         INIT_WORK(&adapter->downshift_task, e1000e_downshift_workaround);
6133         INIT_WORK(&adapter->update_phy_task, e1000e_update_phy_task);
6134         INIT_WORK(&adapter->print_hang_task, e1000_print_hw_hang);
6135
6136         /* Initialize link parameters. User can change them with ethtool */
6137         adapter->hw.mac.autoneg = 1;
6138         adapter->fc_autoneg = 1;
6139         adapter->hw.fc.requested_mode = e1000_fc_default;
6140         adapter->hw.fc.current_mode = e1000_fc_default;
6141         adapter->hw.phy.autoneg_advertised = 0x2f;
6142
6143         /* ring size defaults */
6144         adapter->rx_ring->count = 256;
6145         adapter->tx_ring->count = 256;
6146
6147         /*
6148          * Initial Wake on LAN setting - If APM wake is enabled in
6149          * the EEPROM, enable the ACPI Magic Packet filter
6150          */
6151         if (adapter->flags & FLAG_APME_IN_WUC) {
6152                 /* APME bit in EEPROM is mapped to WUC.APME */
6153                 eeprom_data = er32(WUC);
6154                 eeprom_apme_mask = E1000_WUC_APME;
6155                 if ((hw->mac.type > e1000_ich10lan) &&
6156                     (eeprom_data & E1000_WUC_PHY_WAKE))
6157                         adapter->flags2 |= FLAG2_HAS_PHY_WAKEUP;
6158         } else if (adapter->flags & FLAG_APME_IN_CTRL3) {
6159                 if (adapter->flags & FLAG_APME_CHECK_PORT_B &&
6160                     (adapter->hw.bus.func == 1))
6161                         e1000_read_nvm(&adapter->hw,
6162                                 NVM_INIT_CONTROL3_PORT_B, 1, &eeprom_data);
6163                 else
6164                         e1000_read_nvm(&adapter->hw,
6165                                 NVM_INIT_CONTROL3_PORT_A, 1, &eeprom_data);
6166         }
6167
6168         /* fetch WoL from EEPROM */
6169         if (eeprom_data & eeprom_apme_mask)
6170                 adapter->eeprom_wol |= E1000_WUFC_MAG;
6171
6172         /*
6173          * now that we have the eeprom settings, apply the special cases
6174          * where the eeprom may be wrong or the board simply won't support
6175          * wake on lan on a particular port
6176          */
6177         if (!(adapter->flags & FLAG_HAS_WOL))
6178                 adapter->eeprom_wol = 0;
6179
6180         /* initialize the wol settings based on the eeprom settings */
6181         adapter->wol = adapter->eeprom_wol;
6182         device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
6183
6184         /* save off EEPROM version number */
6185         e1000_read_nvm(&adapter->hw, 5, 1, &adapter->eeprom_vers);
6186
6187         /* reset the hardware with the new settings */
6188         e1000e_reset(adapter);
6189
6190         /*
6191          * If the controller has AMT, do not set DRV_LOAD until the interface
6192          * is up.  For all other cases, let the f/w know that the h/w is now
6193          * under the control of the driver.
6194          */
6195         if (!(adapter->flags & FLAG_HAS_AMT))
6196                 e1000e_get_hw_control(adapter);
6197
6198         strncpy(netdev->name, "eth%d", sizeof(netdev->name) - 1);
6199         err = register_netdev(netdev);
6200         if (err)
6201                 goto err_register;
6202
6203         /* carrier off reporting is important to ethtool even BEFORE open */
6204         netif_carrier_off(netdev);
6205
6206         e1000_print_device_info(adapter);
6207
6208         if (pci_dev_run_wake(pdev))
6209                 pm_runtime_put_noidle(&pdev->dev);
6210
6211         return 0;
6212
6213 err_register:
6214         if (!(adapter->flags & FLAG_HAS_AMT))
6215                 e1000e_release_hw_control(adapter);
6216 err_eeprom:
6217         if (!e1000_check_reset_block(&adapter->hw))
6218                 e1000_phy_hw_reset(&adapter->hw);
6219 err_hw_init:
6220         kfree(adapter->tx_ring);
6221         kfree(adapter->rx_ring);
6222 err_sw_init:
6223         if (adapter->hw.flash_address)
6224                 iounmap(adapter->hw.flash_address);
6225         e1000e_reset_interrupt_capability(adapter);
6226 err_flashmap:
6227         iounmap(adapter->hw.hw_addr);
6228 err_ioremap:
6229         free_netdev(netdev);
6230 err_alloc_etherdev:
6231         pci_release_selected_regions(pdev,
6232                                      pci_select_bars(pdev, IORESOURCE_MEM));
6233 err_pci_reg:
6234 err_dma:
6235         pci_disable_device(pdev);
6236         return err;
6237 }
6238
6239 /**
6240  * e1000_remove - Device Removal Routine
6241  * @pdev: PCI device information struct
6242  *
6243  * e1000_remove is called by the PCI subsystem to alert the driver
6244  * that it should release a PCI device.  The could be caused by a
6245  * Hot-Plug event, or because the driver is going to be removed from
6246  * memory.
6247  **/
6248 static void __devexit e1000_remove(struct pci_dev *pdev)
6249 {
6250         struct net_device *netdev = pci_get_drvdata(pdev);
6251         struct e1000_adapter *adapter = netdev_priv(netdev);
6252         bool down = test_bit(__E1000_DOWN, &adapter->state);
6253
6254         /*
6255          * The timers may be rescheduled, so explicitly disable them
6256          * from being rescheduled.
6257          */
6258         if (!down)
6259                 set_bit(__E1000_DOWN, &adapter->state);
6260         del_timer_sync(&adapter->watchdog_timer);
6261         del_timer_sync(&adapter->phy_info_timer);
6262
6263         cancel_work_sync(&adapter->reset_task);
6264         cancel_work_sync(&adapter->watchdog_task);
6265         cancel_work_sync(&adapter->downshift_task);
6266         cancel_work_sync(&adapter->update_phy_task);
6267         cancel_work_sync(&adapter->print_hang_task);
6268
6269         if (!(netdev->flags & IFF_UP))
6270                 e1000_power_down_phy(adapter);
6271
6272         /* Don't lie to e1000_close() down the road. */
6273         if (!down)
6274                 clear_bit(__E1000_DOWN, &adapter->state);
6275         unregister_netdev(netdev);
6276
6277         if (pci_dev_run_wake(pdev))
6278                 pm_runtime_get_noresume(&pdev->dev);
6279
6280         /*
6281          * Release control of h/w to f/w.  If f/w is AMT enabled, this
6282          * would have already happened in close and is redundant.
6283          */
6284         e1000e_release_hw_control(adapter);
6285
6286         e1000e_reset_interrupt_capability(adapter);
6287         kfree(adapter->tx_ring);
6288         kfree(adapter->rx_ring);
6289
6290         iounmap(adapter->hw.hw_addr);
6291         if (adapter->hw.flash_address)
6292                 iounmap(adapter->hw.flash_address);
6293         pci_release_selected_regions(pdev,
6294                                      pci_select_bars(pdev, IORESOURCE_MEM));
6295
6296         free_netdev(netdev);
6297
6298         /* AER disable */
6299         pci_disable_pcie_error_reporting(pdev);
6300
6301         pci_disable_device(pdev);
6302 }
6303
6304 /* PCI Error Recovery (ERS) */
6305 static struct pci_error_handlers e1000_err_handler = {
6306         .error_detected = e1000_io_error_detected,
6307         .slot_reset = e1000_io_slot_reset,
6308         .resume = e1000_io_resume,
6309 };
6310
6311 static DEFINE_PCI_DEVICE_TABLE(e1000_pci_tbl) = {
6312         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_COPPER), board_82571 },
6313         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_FIBER), board_82571 },
6314         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_COPPER), board_82571 },
6315         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_COPPER_LP), board_82571 },
6316         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_FIBER), board_82571 },
6317         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_SERDES), board_82571 },
6318         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_SERDES_DUAL), board_82571 },
6319         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_SERDES_QUAD), board_82571 },
6320         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571PT_QUAD_COPPER), board_82571 },
6321
6322         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI), board_82572 },
6323         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI_COPPER), board_82572 },
6324         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI_FIBER), board_82572 },
6325         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI_SERDES), board_82572 },
6326
6327         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82573E), board_82573 },
6328         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82573E_IAMT), board_82573 },
6329         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82573L), board_82573 },
6330
6331         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82574L), board_82574 },
6332         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82574LA), board_82574 },
6333         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82583V), board_82583 },
6334
6335         { PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_COPPER_DPT),
6336           board_80003es2lan },
6337         { PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_COPPER_SPT),
6338           board_80003es2lan },
6339         { PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_SERDES_DPT),
6340           board_80003es2lan },
6341         { PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_SERDES_SPT),
6342           board_80003es2lan },
6343
6344         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IFE), board_ich8lan },
6345         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IFE_G), board_ich8lan },
6346         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IFE_GT), board_ich8lan },
6347         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_AMT), board_ich8lan },
6348         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_C), board_ich8lan },
6349         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_M), board_ich8lan },
6350         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_M_AMT), board_ich8lan },
6351         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_82567V_3), board_ich8lan },
6352
6353         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE), board_ich9lan },
6354         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE_G), board_ich9lan },
6355         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE_GT), board_ich9lan },
6356         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_AMT), board_ich9lan },
6357         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_C), board_ich9lan },
6358         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_BM), board_ich9lan },
6359         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_M), board_ich9lan },
6360         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_M_AMT), board_ich9lan },
6361         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_M_V), board_ich9lan },
6362
6363         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_R_BM_LM), board_ich9lan },
6364         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_R_BM_LF), board_ich9lan },
6365         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_R_BM_V), board_ich9lan },
6366
6367         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_D_BM_LM), board_ich10lan },
6368         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_D_BM_LF), board_ich10lan },
6369         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_D_BM_V), board_ich10lan },
6370
6371         { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_M_HV_LM), board_pchlan },
6372         { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_M_HV_LC), board_pchlan },
6373         { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_D_HV_DM), board_pchlan },
6374         { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_D_HV_DC), board_pchlan },
6375
6376         { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH2_LV_LM), board_pch2lan },
6377         { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH2_LV_V), board_pch2lan },
6378
6379         { }     /* terminate list */
6380 };
6381 MODULE_DEVICE_TABLE(pci, e1000_pci_tbl);
6382
6383 #ifdef CONFIG_PM
6384 static const struct dev_pm_ops e1000_pm_ops = {
6385         SET_SYSTEM_SLEEP_PM_OPS(e1000_suspend, e1000_resume)
6386         SET_RUNTIME_PM_OPS(e1000_runtime_suspend,
6387                                 e1000_runtime_resume, e1000_idle)
6388 };
6389 #endif
6390
6391 /* PCI Device API Driver */
6392 static struct pci_driver e1000_driver = {
6393         .name     = e1000e_driver_name,
6394         .id_table = e1000_pci_tbl,
6395         .probe    = e1000_probe,
6396         .remove   = __devexit_p(e1000_remove),
6397 #ifdef CONFIG_PM
6398         .driver.pm = &e1000_pm_ops,
6399 #endif
6400         .shutdown = e1000_shutdown,
6401         .err_handler = &e1000_err_handler
6402 };
6403
6404 /**
6405  * e1000_init_module - Driver Registration Routine
6406  *
6407  * e1000_init_module is the first routine called when the driver is
6408  * loaded. All it does is register with the PCI subsystem.
6409  **/
6410 static int __init e1000_init_module(void)
6411 {
6412         int ret;
6413         pr_info("Intel(R) PRO/1000 Network Driver - %s\n",
6414                 e1000e_driver_version);
6415         pr_info("Copyright(c) 1999 - 2011 Intel Corporation.\n");
6416         ret = pci_register_driver(&e1000_driver);
6417
6418         return ret;
6419 }
6420 module_init(e1000_init_module);
6421
6422 /**
6423  * e1000_exit_module - Driver Exit Cleanup Routine
6424  *
6425  * e1000_exit_module is called just before the driver is removed
6426  * from memory.
6427  **/
6428 static void __exit e1000_exit_module(void)
6429 {
6430         pci_unregister_driver(&e1000_driver);
6431 }
6432 module_exit(e1000_exit_module);
6433
6434
6435 MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>");
6436 MODULE_DESCRIPTION("Intel(R) PRO/1000 Network Driver");
6437 MODULE_LICENSE("GPL");
6438 MODULE_VERSION(DRV_VERSION);
6439
6440 /* e1000_main.c */