drivers/net/e1000/e1000_main.c

   1 /*******************************************************************************
   2
   3   Intel PRO/1000 Linux driver
   4   Copyright(c) 1999 - 2006 Intel Corporation.
   5
   6   This program is free software; you can redistribute it and/or modify it
   7   under the terms and conditions of the GNU General Public License,
   8   version 2, as published by the Free Software Foundation.
   9
  10   This program is distributed in the hope it will be useful, but WITHOUT
  11   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  12   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  13   more details.
  14
  15   You should have received a copy of the GNU General Public License along with
  16   this program; if not, write to the Free Software Foundation, Inc.,
  17   51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
  18
  19   The full GNU General Public License is included in this distribution in
  20   the file called "COPYING".
  21
  22   Contact Information:
  23   Linux NICS <linux.nics@intel.com>
  24   e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
  25   Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
  26
  27 *******************************************************************************/
  28
  29 #include "e1000.h"
  30 #include <net/ip6_checksum.h>
  31
  32 char e1000_driver_name[] = "e1000";
  33 static char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver";
  34 #ifndef CONFIG_E1000_NAPI
  35 #define DRIVERNAPI
  36 #else
  37 #define DRIVERNAPI "-NAPI"
  38 #endif
  39 #define DRV_VERSION "7.3.20-k2"DRIVERNAPI
  40 char e1000_driver_version[] = DRV_VERSION;
  41 static char e1000_copyright[] = "Copyright (c) 1999-2006 Intel Corporation.";
  42
  43 /* e1000_pci_tbl - PCI Device ID Table
  44  *
  45  * Last entry must be all 0s
  46  *
  47  * Macro expands to...
  48  *   {PCI_DEVICE(PCI_VENDOR_ID_INTEL, device_id)}
  49  */
  50 static struct pci_device_id e1000_pci_tbl[] = {
  51         INTEL_E1000_ETHERNET_DEVICE(0x1000),
  52         INTEL_E1000_ETHERNET_DEVICE(0x1001),
  53         INTEL_E1000_ETHERNET_DEVICE(0x1004),
  54         INTEL_E1000_ETHERNET_DEVICE(0x1008),
  55         INTEL_E1000_ETHERNET_DEVICE(0x1009),
  56         INTEL_E1000_ETHERNET_DEVICE(0x100C),
  57         INTEL_E1000_ETHERNET_DEVICE(0x100D),
  58         INTEL_E1000_ETHERNET_DEVICE(0x100E),
  59         INTEL_E1000_ETHERNET_DEVICE(0x100F),
  60         INTEL_E1000_ETHERNET_DEVICE(0x1010),
  61         INTEL_E1000_ETHERNET_DEVICE(0x1011),
  62         INTEL_E1000_ETHERNET_DEVICE(0x1012),
  63         INTEL_E1000_ETHERNET_DEVICE(0x1013),
  64         INTEL_E1000_ETHERNET_DEVICE(0x1014),
  65         INTEL_E1000_ETHERNET_DEVICE(0x1015),
  66         INTEL_E1000_ETHERNET_DEVICE(0x1016),
  67         INTEL_E1000_ETHERNET_DEVICE(0x1017),
  68         INTEL_E1000_ETHERNET_DEVICE(0x1018),
  69         INTEL_E1000_ETHERNET_DEVICE(0x1019),
  70         INTEL_E1000_ETHERNET_DEVICE(0x101A),
  71         INTEL_E1000_ETHERNET_DEVICE(0x101D),
  72         INTEL_E1000_ETHERNET_DEVICE(0x101E),
  73         INTEL_E1000_ETHERNET_DEVICE(0x1026),
  74         INTEL_E1000_ETHERNET_DEVICE(0x1027),
  75         INTEL_E1000_ETHERNET_DEVICE(0x1028),
  76         INTEL_E1000_ETHERNET_DEVICE(0x1049),
  77         INTEL_E1000_ETHERNET_DEVICE(0x104A),
  78         INTEL_E1000_ETHERNET_DEVICE(0x104B),
  79         INTEL_E1000_ETHERNET_DEVICE(0x104C),
  80         INTEL_E1000_ETHERNET_DEVICE(0x104D),
  81         INTEL_E1000_ETHERNET_DEVICE(0x105E),
  82         INTEL_E1000_ETHERNET_DEVICE(0x105F),
  83         INTEL_E1000_ETHERNET_DEVICE(0x1060),
  84         INTEL_E1000_ETHERNET_DEVICE(0x1075),
  85         INTEL_E1000_ETHERNET_DEVICE(0x1076),
  86         INTEL_E1000_ETHERNET_DEVICE(0x1077),
  87         INTEL_E1000_ETHERNET_DEVICE(0x1078),
  88         INTEL_E1000_ETHERNET_DEVICE(0x1079),
  89         INTEL_E1000_ETHERNET_DEVICE(0x107A),
  90         INTEL_E1000_ETHERNET_DEVICE(0x107B),
  91         INTEL_E1000_ETHERNET_DEVICE(0x107C),
  92         INTEL_E1000_ETHERNET_DEVICE(0x107D),
  93         INTEL_E1000_ETHERNET_DEVICE(0x107E),
  94         INTEL_E1000_ETHERNET_DEVICE(0x107F),
  95         INTEL_E1000_ETHERNET_DEVICE(0x108A),
  96         INTEL_E1000_ETHERNET_DEVICE(0x108B),
  97         INTEL_E1000_ETHERNET_DEVICE(0x108C),
  98         INTEL_E1000_ETHERNET_DEVICE(0x1096),
  99         INTEL_E1000_ETHERNET_DEVICE(0x1098),
 100         INTEL_E1000_ETHERNET_DEVICE(0x1099),
 101         INTEL_E1000_ETHERNET_DEVICE(0x109A),
 102         INTEL_E1000_ETHERNET_DEVICE(0x10A4),
 103         INTEL_E1000_ETHERNET_DEVICE(0x10B5),
 104         INTEL_E1000_ETHERNET_DEVICE(0x10B9),
 105         INTEL_E1000_ETHERNET_DEVICE(0x10BA),
 106         INTEL_E1000_ETHERNET_DEVICE(0x10BB),
 107         INTEL_E1000_ETHERNET_DEVICE(0x10BC),
 108         INTEL_E1000_ETHERNET_DEVICE(0x10C4),
 109         INTEL_E1000_ETHERNET_DEVICE(0x10C5),
 110         /* required last entry */
 111         {0,}
 112 };
 113
 114 MODULE_DEVICE_TABLE(pci, e1000_pci_tbl);
 115
 116 int e1000_up(struct e1000_adapter *adapter);
 117 void e1000_down(struct e1000_adapter *adapter);
 118 void e1000_reinit_locked(struct e1000_adapter *adapter);
 119 void e1000_reset(struct e1000_adapter *adapter);
 120 int e1000_set_spd_dplx(struct e1000_adapter *adapter, uint16_t spddplx);
 121 int e1000_setup_all_tx_resources(struct e1000_adapter *adapter);
 122 int e1000_setup_all_rx_resources(struct e1000_adapter *adapter);
 123 void e1000_free_all_tx_resources(struct e1000_adapter *adapter);
 124 void e1000_free_all_rx_resources(struct e1000_adapter *adapter);
 125 static int e1000_setup_tx_resources(struct e1000_adapter *adapter,
 126                              struct e1000_tx_ring *txdr);
 127 static int e1000_setup_rx_resources(struct e1000_adapter *adapter,
 128                              struct e1000_rx_ring *rxdr);
 129 static void e1000_free_tx_resources(struct e1000_adapter *adapter,
 130                              struct e1000_tx_ring *tx_ring);
 131 static void e1000_free_rx_resources(struct e1000_adapter *adapter,
 132                              struct e1000_rx_ring *rx_ring);
 133 void e1000_update_stats(struct e1000_adapter *adapter);
 134
 135 static int e1000_init_module(void);
 136 static void e1000_exit_module(void);
 137 static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent);
 138 static void __devexit e1000_remove(struct pci_dev *pdev);
 139 static int e1000_alloc_queues(struct e1000_adapter *adapter);
 140 static int e1000_sw_init(struct e1000_adapter *adapter);
 141 static int e1000_open(struct net_device *netdev);
 142 static int e1000_close(struct net_device *netdev);
 143 static void e1000_configure_tx(struct e1000_adapter *adapter);
 144 static void e1000_configure_rx(struct e1000_adapter *adapter);
 145 static void e1000_setup_rctl(struct e1000_adapter *adapter);
 146 static void e1000_clean_all_tx_rings(struct e1000_adapter *adapter);
 147 static void e1000_clean_all_rx_rings(struct e1000_adapter *adapter);
 148 static void e1000_clean_tx_ring(struct e1000_adapter *adapter,
 149                                 struct e1000_tx_ring *tx_ring);
 150 static void e1000_clean_rx_ring(struct e1000_adapter *adapter,
 151                                 struct e1000_rx_ring *rx_ring);
 152 static void e1000_set_multi(struct net_device *netdev);
 153 static void e1000_update_phy_info(unsigned long data);
 154 static void e1000_watchdog(unsigned long data);
 155 static void e1000_82547_tx_fifo_stall(unsigned long data);
 156 static int e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev);
 157 static struct net_device_stats * e1000_get_stats(struct net_device *netdev);
 158 static int e1000_change_mtu(struct net_device *netdev, int new_mtu);
 159 static int e1000_set_mac(struct net_device *netdev, void *p);
 160 static irqreturn_t e1000_intr(int irq, void *data);
 161 #ifdef CONFIG_PCI_MSI
 162 static irqreturn_t e1000_intr_msi(int irq, void *data);
 163 #endif
 164 static boolean_t e1000_clean_tx_irq(struct e1000_adapter *adapter,
 165                                     struct e1000_tx_ring *tx_ring);
 166 #ifdef CONFIG_E1000_NAPI
 167 static int e1000_clean(struct net_device *poll_dev, int *budget);
 168 static boolean_t e1000_clean_rx_irq(struct e1000_adapter *adapter,
 169                                     struct e1000_rx_ring *rx_ring,
 170                                     int *work_done, int work_to_do);
 171 static boolean_t e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
 172                                        struct e1000_rx_ring *rx_ring,
 173                                        int *work_done, int work_to_do);
 174 #else
 175 static boolean_t e1000_clean_rx_irq(struct e1000_adapter *adapter,
 176                                     struct e1000_rx_ring *rx_ring);
 177 static boolean_t e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
 178                                        struct e1000_rx_ring *rx_ring);
 179 #endif
 180 static void e1000_alloc_rx_buffers(struct e1000_adapter *adapter,
 181                                    struct e1000_rx_ring *rx_ring,
 182                                    int cleaned_count);
 183 static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter,
 184                                       struct e1000_rx_ring *rx_ring,
 185                                       int cleaned_count);
 186 static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd);
 187 static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr,
 188                            int cmd);
 189 void e1000_set_ethtool_ops(struct net_device *netdev);
 190 static void e1000_enter_82542_rst(struct e1000_adapter *adapter);
 191 static void e1000_leave_82542_rst(struct e1000_adapter *adapter);
 192 static void e1000_tx_timeout(struct net_device *dev);
 193 static void e1000_reset_task(struct work_struct *work);
 194 static void e1000_smartspeed(struct e1000_adapter *adapter);
 195 static int e1000_82547_fifo_workaround(struct e1000_adapter *adapter,
 196                                        struct sk_buff *skb);
 197
 198 static void e1000_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp);
 199 static void e1000_vlan_rx_add_vid(struct net_device *netdev, uint16_t vid);
 200 static void e1000_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid);
 201 static void e1000_restore_vlan(struct e1000_adapter *adapter);
 202
 203 static int e1000_suspend(struct pci_dev *pdev, pm_message_t state);
 204 #ifdef CONFIG_PM
 205 static int e1000_resume(struct pci_dev *pdev);
 206 #endif
 207 static void e1000_shutdown(struct pci_dev *pdev);
 208
 209 #ifdef CONFIG_NET_POLL_CONTROLLER
 210 /* for netdump / net console */
 211 static void e1000_netpoll (struct net_device *netdev);
 212 #endif
 213
 214 extern void e1000_check_options(struct e1000_adapter *adapter);
 215
 216 #define COPYBREAK_DEFAULT 256
 217 static unsigned int copybreak __read_mostly = COPYBREAK_DEFAULT;
 218 module_param(copybreak, uint, 0644);
 219 MODULE_PARM_DESC(copybreak,
 220         "Maximum size of packet that is copied to a new buffer on receive");
 221
 222 static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev,
 223                      pci_channel_state_t state);
 224 static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev);
 225 static void e1000_io_resume(struct pci_dev *pdev);
 226
 227 static struct pci_error_handlers e1000_err_handler = {
 228         .error_detected = e1000_io_error_detected,
 229         .slot_reset = e1000_io_slot_reset,
 230         .resume = e1000_io_resume,
 231 };
 232
 233 static struct pci_driver e1000_driver = {
 234         .name     = e1000_driver_name,
 235         .id_table = e1000_pci_tbl,
 236         .probe    = e1000_probe,
 237         .remove   = __devexit_p(e1000_remove),
 238 #ifdef CONFIG_PM
 239         /* Power Managment Hooks */
 240         .suspend  = e1000_suspend,
 241         .resume   = e1000_resume,
 242 #endif
 243         .shutdown = e1000_shutdown,
 244         .err_handler = &e1000_err_handler
 245 };
 246
 247 MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>");
 248 MODULE_DESCRIPTION("Intel(R) PRO/1000 Network Driver");
 249 MODULE_LICENSE("GPL");
 250 MODULE_VERSION(DRV_VERSION);
 251
 252 static int debug = NETIF_MSG_DRV | NETIF_MSG_PROBE;
 253 module_param(debug, int, 0);
 254 MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
 255
 256 /**
 257  * e1000_init_module - Driver Registration Routine
 258  *
 259  * e1000_init_module is the first routine called when the driver is
 260  * loaded. All it does is register with the PCI subsystem.
 261  **/
 262
 263 static int __init
 264 e1000_init_module(void)
 265 {
 266         int ret;
 267         printk(KERN_INFO "%s - version %s\n",
 268                e1000_driver_string, e1000_driver_version);
 269
 270         printk(KERN_INFO "%s\n", e1000_copyright);
 271
 272         ret = pci_register_driver(&e1000_driver);
 273         if (copybreak != COPYBREAK_DEFAULT) {
 274                 if (copybreak == 0)
 275                         printk(KERN_INFO "e1000: copybreak disabled\n");
 276                 else
 277                         printk(KERN_INFO "e1000: copybreak enabled for "
 278                                "packets <= %u bytes\n", copybreak);
 279         }
 280         return ret;
 281 }
 282
 283 module_init(e1000_init_module);
 284
 285 /**
 286  * e1000_exit_module - Driver Exit Cleanup Routine
 287  *
 288  * e1000_exit_module is called just before the driver is removed
 289  * from memory.
 290  **/
 291
 292 static void __exit
 293 e1000_exit_module(void)
 294 {
 295         pci_unregister_driver(&e1000_driver);
 296 }
 297
 298 module_exit(e1000_exit_module);
 299
 300 static int e1000_request_irq(struct e1000_adapter *adapter)
 301 {
 302         struct net_device *netdev = adapter->netdev;
 303         int flags, err = 0;
 304
 305         flags = IRQF_SHARED;
 306 #ifdef CONFIG_PCI_MSI
 307         if (adapter->hw.mac_type >= e1000_82571) {
 308                 adapter->have_msi = TRUE;
 309                 if ((err = pci_enable_msi(adapter->pdev))) {
 310                         DPRINTK(PROBE, ERR,
 311                          "Unable to allocate MSI interrupt Error: %d\n", err);
 312                         adapter->have_msi = FALSE;
 313                 }
 314         }
 315         if (adapter->have_msi) {
 316                 flags &= ~IRQF_SHARED;
 317                 err = request_irq(adapter->pdev->irq, &e1000_intr_msi, flags,
 318                                   netdev->name, netdev);
 319                 if (err)
 320                         DPRINTK(PROBE, ERR,
 321                                "Unable to allocate interrupt Error: %d\n", err);
 322         } else
 323 #endif
 324         if ((err = request_irq(adapter->pdev->irq, &e1000_intr, flags,
 325                                netdev->name, netdev)))
 326                 DPRINTK(PROBE, ERR,
 327                         "Unable to allocate interrupt Error: %d\n", err);
 328
 329         return err;
 330 }
 331
 332 static void e1000_free_irq(struct e1000_adapter *adapter)
 333 {
 334         struct net_device *netdev = adapter->netdev;
 335
 336         free_irq(adapter->pdev->irq, netdev);
 337
 338 #ifdef CONFIG_PCI_MSI
 339         if (adapter->have_msi)
 340                 pci_disable_msi(adapter->pdev);
 341 #endif
 342 }
 343
 344 /**
 345  * e1000_irq_disable - Mask off interrupt generation on the NIC
 346  * @adapter: board private structure
 347  **/
 348
 349 static void
 350 e1000_irq_disable(struct e1000_adapter *adapter)
 351 {
 352         atomic_inc(&adapter->irq_sem);
 353         E1000_WRITE_REG(&adapter->hw, IMC, ~0);
 354         E1000_WRITE_FLUSH(&adapter->hw);
 355         synchronize_irq(adapter->pdev->irq);
 356 }
 357
 358 /**
 359  * e1000_irq_enable - Enable default interrupt generation settings
 360  * @adapter: board private structure
 361  **/
 362
 363 static void
 364 e1000_irq_enable(struct e1000_adapter *adapter)
 365 {
 366         if (likely(atomic_dec_and_test(&adapter->irq_sem))) {
 367                 E1000_WRITE_REG(&adapter->hw, IMS, IMS_ENABLE_MASK);
 368                 E1000_WRITE_FLUSH(&adapter->hw);
 369         }
 370 }
 371
 372 static void
 373 e1000_update_mng_vlan(struct e1000_adapter *adapter)
 374 {
 375         struct net_device *netdev = adapter->netdev;
 376         uint16_t vid = adapter->hw.mng_cookie.vlan_id;
 377         uint16_t old_vid = adapter->mng_vlan_id;
 378         if (adapter->vlgrp) {
 379                 if (!vlan_group_get_device(adapter->vlgrp, vid)) {
 380                         if (adapter->hw.mng_cookie.status &
 381                                 E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) {
 382                                 e1000_vlan_rx_add_vid(netdev, vid);
 383                                 adapter->mng_vlan_id = vid;
 384                         } else
 385                                 adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
 386
 387                         if ((old_vid != (uint16_t)E1000_MNG_VLAN_NONE) &&
 388                                         (vid != old_vid) &&
 389                             !vlan_group_get_device(adapter->vlgrp, old_vid))
 390                                 e1000_vlan_rx_kill_vid(netdev, old_vid);
 391                 } else
 392                         adapter->mng_vlan_id = vid;
 393         }
 394 }
 395
 396 /**
 397  * e1000_release_hw_control - release control of the h/w to f/w
 398  * @adapter: address of board private structure
 399  *
 400  * e1000_release_hw_control resets {CTRL_EXT|FWSM}:DRV_LOAD bit.
 401  * For ASF and Pass Through versions of f/w this means that the
 402  * driver is no longer loaded. For AMT version (only with 82573) i
 403  * of the f/w this means that the network i/f is closed.
 404  *
 405  **/
 406
 407 static void
 408 e1000_release_hw_control(struct e1000_adapter *adapter)
 409 {
 410         uint32_t ctrl_ext;
 411         uint32_t swsm;
 412
 413         /* Let firmware taken over control of h/w */
 414         switch (adapter->hw.mac_type) {
 415         case e1000_82573:
 416                 swsm = E1000_READ_REG(&adapter->hw, SWSM);
 417                 E1000_WRITE_REG(&adapter->hw, SWSM,
 418                                 swsm & ~E1000_SWSM_DRV_LOAD);
 419                 break;
 420         case e1000_82571:
 421         case e1000_82572:
 422         case e1000_80003es2lan:
 423         case e1000_ich8lan:
 424                 ctrl_ext = E1000_READ_REG(&adapter->hw, CTRL_EXT);
 425                 E1000_WRITE_REG(&adapter->hw, CTRL_EXT,
 426                                 ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD);
 427                 break;
 428         default:
 429                 break;
 430         }
 431 }
 432
 433 /**
 434  * e1000_get_hw_control - get control of the h/w from f/w
 435  * @adapter: address of board private structure
 436  *
 437  * e1000_get_hw_control sets {CTRL_EXT|FWSM}:DRV_LOAD bit.
 438  * For ASF and Pass Through versions of f/w this means that
 439  * the driver is loaded. For AMT version (only with 82573)
 440  * of the f/w this means that the network i/f is open.
 441  *
 442  **/
 443
 444 static void
 445 e1000_get_hw_control(struct e1000_adapter *adapter)
 446 {
 447         uint32_t ctrl_ext;
 448         uint32_t swsm;
 449
 450         /* Let firmware know the driver has taken over */
 451         switch (adapter->hw.mac_type) {
 452         case e1000_82573:
 453                 swsm = E1000_READ_REG(&adapter->hw, SWSM);
 454                 E1000_WRITE_REG(&adapter->hw, SWSM,
 455                                 swsm | E1000_SWSM_DRV_LOAD);
 456                 break;
 457         case e1000_82571:
 458         case e1000_82572:
 459         case e1000_80003es2lan:
 460         case e1000_ich8lan:
 461                 ctrl_ext = E1000_READ_REG(&adapter->hw, CTRL_EXT);
 462                 E1000_WRITE_REG(&adapter->hw, CTRL_EXT,
 463                                 ctrl_ext | E1000_CTRL_EXT_DRV_LOAD);
 464                 break;
 465         default:
 466                 break;
 467         }
 468 }
 469
 470 static void
 471 e1000_init_manageability(struct e1000_adapter *adapter)
 472 {
 473         if (adapter->en_mng_pt) {
 474                 uint32_t manc = E1000_READ_REG(&adapter->hw, MANC);
 475
 476                 /* disable hardware interception of ARP */
 477                 manc &= ~(E1000_MANC_ARP_EN);
 478
 479                 /* enable receiving management packets to the host */
 480                 /* this will probably generate destination unreachable messages
 481                  * from the host OS, but the packets will be handled on SMBUS */
 482                 if (adapter->hw.has_manc2h) {
 483                         uint32_t manc2h = E1000_READ_REG(&adapter->hw, MANC2H);
 484
 485                         manc |= E1000_MANC_EN_MNG2HOST;
 486 #define E1000_MNG2HOST_PORT_623 (1 << 5)
 487 #define E1000_MNG2HOST_PORT_664 (1 << 6)
 488                         manc2h |= E1000_MNG2HOST_PORT_623;
 489                         manc2h |= E1000_MNG2HOST_PORT_664;
 490                         E1000_WRITE_REG(&adapter->hw, MANC2H, manc2h);
 491                 }
 492
 493                 E1000_WRITE_REG(&adapter->hw, MANC, manc);
 494         }
 495 }
 496
 497 static void
 498 e1000_release_manageability(struct e1000_adapter *adapter)
 499 {
 500         if (adapter->en_mng_pt) {
 501                 uint32_t manc = E1000_READ_REG(&adapter->hw, MANC);
 502
 503                 /* re-enable hardware interception of ARP */
 504                 manc |= E1000_MANC_ARP_EN;
 505
 506                 if (adapter->hw.has_manc2h)
 507                         manc &= ~E1000_MANC_EN_MNG2HOST;
 508
 509                 /* don't explicitly have to mess with MANC2H since
 510                  * MANC has an enable disable that gates MANC2H */
 511
 512                 E1000_WRITE_REG(&adapter->hw, MANC, manc);
 513         }
 514 }
 515
 516 /**
 517  * e1000_configure - configure the hardware for RX and TX
 518  * @adapter = private board structure
 519  **/
 520 static void e1000_configure(struct e1000_adapter *adapter)
 521 {
 522         struct net_device *netdev = adapter->netdev;
 523         int i;
 524
 525         e1000_set_multi(netdev);
 526
 527         e1000_restore_vlan(adapter);
 528         e1000_init_manageability(adapter);
 529
 530         e1000_configure_tx(adapter);
 531         e1000_setup_rctl(adapter);
 532         e1000_configure_rx(adapter);
 533         /* call E1000_DESC_UNUSED which always leaves
 534          * at least 1 descriptor unused to make sure
 535          * next_to_use != next_to_clean */
 536         for (i = 0; i < adapter->num_rx_queues; i++) {
 537                 struct e1000_rx_ring *ring = &adapter->rx_ring[i];
 538                 adapter->alloc_rx_buf(adapter, ring,
 539                                       E1000_DESC_UNUSED(ring));
 540         }
 541
 542         adapter->tx_queue_len = netdev->tx_queue_len;
 543 }
 544
 545 int e1000_up(struct e1000_adapter *adapter)
 546 {
 547         /* hardware has been reset, we need to reload some things */
 548         e1000_configure(adapter);
 549
 550         clear_bit(__E1000_DOWN, &adapter->flags);
 551
 552 #ifdef CONFIG_E1000_NAPI
 553         netif_poll_enable(adapter->netdev);
 554 #endif
 555         e1000_irq_enable(adapter);
 556
 557         /* fire a link change interrupt to start the watchdog */
 558         E1000_WRITE_REG(&adapter->hw, ICS, E1000_ICS_LSC);
 559         return 0;
 560 }
 561
 562 /**
 563  * e1000_power_up_phy - restore link in case the phy was powered down
 564  * @adapter: address of board private structure
 565  *
 566  * The phy may be powered down to save power and turn off link when the
 567  * driver is unloaded and wake on lan is not enabled (among others)
 568  * *** this routine MUST be followed by a call to e1000_reset ***
 569  *
 570  **/
 571
 572 void e1000_power_up_phy(struct e1000_adapter *adapter)
 573 {
 574         uint16_t mii_reg = 0;
 575
 576         /* Just clear the power down bit to wake the phy back up */
 577         if (adapter->hw.media_type == e1000_media_type_copper) {
 578                 /* according to the manual, the phy will retain its
 579                  * settings across a power-down/up cycle */
 580                 e1000_read_phy_reg(&adapter->hw, PHY_CTRL, &mii_reg);
 581                 mii_reg &= ~MII_CR_POWER_DOWN;
 582                 e1000_write_phy_reg(&adapter->hw, PHY_CTRL, mii_reg);
 583         }
 584 }
 585
 586 static void e1000_power_down_phy(struct e1000_adapter *adapter)
 587 {
 588         /* Power down the PHY so no link is implied when interface is down *
 589          * The PHY cannot be powered down if any of the following is TRUE *
 590          * (a) WoL is enabled
 591          * (b) AMT is active
 592          * (c) SoL/IDER session is active */
 593         if (!adapter->wol && adapter->hw.mac_type >= e1000_82540 &&
 594            adapter->hw.media_type == e1000_media_type_copper) {
 595                 uint16_t mii_reg = 0;
 596
 597                 switch (adapter->hw.mac_type) {
 598                 case e1000_82540:
 599                 case e1000_82545:
 600                 case e1000_82545_rev_3:
 601                 case e1000_82546:
 602                 case e1000_82546_rev_3:
 603                 case e1000_82541:
 604                 case e1000_82541_rev_2:
 605                 case e1000_82547:
 606                 case e1000_82547_rev_2:
 607                         if (E1000_READ_REG(&adapter->hw, MANC) &
 608                             E1000_MANC_SMBUS_EN)
 609                                 goto out;
 610                         break;
 611                 case e1000_82571:
 612                 case e1000_82572:
 613                 case e1000_82573:
 614                 case e1000_80003es2lan:
 615                 case e1000_ich8lan:
 616                         if (e1000_check_mng_mode(&adapter->hw) ||
 617                             e1000_check_phy_reset_block(&adapter->hw))
 618                                 goto out;
 619                         break;
 620                 default:
 621                         goto out;
 622                 }
 623                 e1000_read_phy_reg(&adapter->hw, PHY_CTRL, &mii_reg);
 624                 mii_reg |= MII_CR_POWER_DOWN;
 625                 e1000_write_phy_reg(&adapter->hw, PHY_CTRL, mii_reg);
 626                 mdelay(1);
 627         }
 628 out:
 629         return;
 630 }
 631
 632 void
 633 e1000_down(struct e1000_adapter *adapter)
 634 {
 635         struct net_device *netdev = adapter->netdev;
 636
 637         /* signal that we're down so the interrupt handler does not
 638          * reschedule our watchdog timer */
 639         set_bit(__E1000_DOWN, &adapter->flags);
 640
 641 #ifdef CONFIG_E1000_NAPI
 642         netif_poll_disable(netdev);
 643 #endif
 644         e1000_irq_disable(adapter);
 645
 646         del_timer_sync(&adapter->tx_fifo_stall_timer);
 647         del_timer_sync(&adapter->watchdog_timer);
 648         del_timer_sync(&adapter->phy_info_timer);
 649
 650         netdev->tx_queue_len = adapter->tx_queue_len;
 651         adapter->link_speed = 0;
 652         adapter->link_duplex = 0;
 653         netif_carrier_off(netdev);
 654         netif_stop_queue(netdev);
 655
 656         e1000_reset(adapter);
 657         e1000_clean_all_tx_rings(adapter);
 658         e1000_clean_all_rx_rings(adapter);
 659 }
 660
 661 void
 662 e1000_reinit_locked(struct e1000_adapter *adapter)
 663 {
 664         WARN_ON(in_interrupt());
 665         while (test_and_set_bit(__E1000_RESETTING, &adapter->flags))
 666                 msleep(1);
 667         e1000_down(adapter);
 668         e1000_up(adapter);
 669         clear_bit(__E1000_RESETTING, &adapter->flags);
 670 }
 671
 672 void
 673 e1000_reset(struct e1000_adapter *adapter)
 674 {
 675         uint32_t pba = 0, tx_space, min_tx_space, min_rx_space;
 676         uint16_t fc_high_water_mark = E1000_FC_HIGH_DIFF;
 677         boolean_t legacy_pba_adjust = FALSE;
 678
 679         /* Repartition Pba for greater than 9k mtu
 680          * To take effect CTRL.RST is required.
 681          */
 682
 683         switch (adapter->hw.mac_type) {
 684         case e1000_82542_rev2_0:
 685         case e1000_82542_rev2_1:
 686         case e1000_82543:
 687         case e1000_82544:
 688         case e1000_82540:
 689         case e1000_82541:
 690         case e1000_82541_rev_2:
 691                 legacy_pba_adjust = TRUE;
 692                 pba = E1000_PBA_48K;
 693                 break;
 694         case e1000_82545:
 695         case e1000_82545_rev_3:
 696         case e1000_82546:
 697         case e1000_82546_rev_3:
 698                 pba = E1000_PBA_48K;
 699                 break;
 700         case e1000_82547:
 701         case e1000_82547_rev_2:
 702                 legacy_pba_adjust = TRUE;
 703                 pba = E1000_PBA_30K;
 704                 break;
 705         case e1000_82571:
 706         case e1000_82572:
 707         case e1000_80003es2lan:
 708                 pba = E1000_PBA_38K;
 709                 break;
 710         case e1000_82573:
 711                 pba = E1000_PBA_20K;
 712                 break;
 713         case e1000_ich8lan:
 714                 pba = E1000_PBA_8K;
 715         case e1000_undefined:
 716         case e1000_num_macs:
 717                 break;
 718         }
 719
 720         if (legacy_pba_adjust == TRUE) {
 721                 if (adapter->netdev->mtu > E1000_RXBUFFER_8192)
 722                         pba -= 8; /* allocate more FIFO for Tx */
 723
 724                 if (adapter->hw.mac_type == e1000_82547) {
 725                         adapter->tx_fifo_head = 0;
 726                         adapter->tx_head_addr = pba << E1000_TX_HEAD_ADDR_SHIFT;
 727                         adapter->tx_fifo_size =
 728                                 (E1000_PBA_40K - pba) << E1000_PBA_BYTES_SHIFT;
 729                         atomic_set(&adapter->tx_fifo_stall, 0);
 730                 }
 731         } else if (adapter->hw.max_frame_size > MAXIMUM_ETHERNET_FRAME_SIZE) {
 732                 /* adjust PBA for jumbo frames */
 733                 E1000_WRITE_REG(&adapter->hw, PBA, pba);
 734
 735                 /* To maintain wire speed transmits, the Tx FIFO should be
 736                  * large enough to accomodate two full transmit packets,
 737                  * rounded up to the next 1KB and expressed in KB.  Likewise,
 738                  * the Rx FIFO should be large enough to accomodate at least
 739                  * one full receive packet and is similarly rounded up and
 740                  * expressed in KB. */
 741                 pba = E1000_READ_REG(&adapter->hw, PBA);
 742                 /* upper 16 bits has Tx packet buffer allocation size in KB */
 743                 tx_space = pba >> 16;
 744                 /* lower 16 bits has Rx packet buffer allocation size in KB */
 745                 pba &= 0xffff;
 746                 /* don't include ethernet FCS because hardware appends/strips */
 747                 min_rx_space = adapter->netdev->mtu + ENET_HEADER_SIZE +
 748                                VLAN_TAG_SIZE;
 749                 min_tx_space = min_rx_space;
 750                 min_tx_space *= 2;
 751                 E1000_ROUNDUP(min_tx_space, 1024);
 752                 min_tx_space >>= 10;
 753                 E1000_ROUNDUP(min_rx_space, 1024);
 754                 min_rx_space >>= 10;
 755
 756                 /* If current Tx allocation is less than the min Tx FIFO size,
 757                  * and the min Tx FIFO size is less than the current Rx FIFO
 758                  * allocation, take space away from current Rx allocation */
 759                 if (tx_space < min_tx_space &&
 760                     ((min_tx_space - tx_space) < pba)) {
 761                         pba = pba - (min_tx_space - tx_space);
 762
 763                         /* PCI/PCIx hardware has PBA alignment constraints */
 764                         switch (adapter->hw.mac_type) {
 765                         case e1000_82545 ... e1000_82546_rev_3:
 766                                 pba &= ~(E1000_PBA_8K - 1);
 767                                 break;
 768                         default:
 769                                 break;
 770                         }
 771
 772                         /* if short on rx space, rx wins and must trump tx
 773                          * adjustment or use Early Receive if available */
 774                         if (pba < min_rx_space) {
 775                                 switch (adapter->hw.mac_type) {
 776                                 case e1000_82573:
 777                                         /* ERT enabled in e1000_configure_rx */
 778                                         break;
 779                                 default:
 780                                         pba = min_rx_space;
 781                                         break;
 782                                 }
 783                         }
 784                 }
 785         }
 786
 787         E1000_WRITE_REG(&adapter->hw, PBA, pba);
 788
 789         /* flow control settings */
 790         /* Set the FC high water mark to 90% of the FIFO size.
 791          * Required to clear last 3 LSB */
 792         fc_high_water_mark = ((pba * 9216)/10) & 0xFFF8;
 793         /* We can't use 90% on small FIFOs because the remainder
 794          * would be less than 1 full frame.  In this case, we size
 795          * it to allow at least a full frame above the high water
 796          *  mark. */
 797         if (pba < E1000_PBA_16K)
 798                 fc_high_water_mark = (pba * 1024) - 1600;
 799
 800         adapter->hw.fc_high_water = fc_high_water_mark;
 801         adapter->hw.fc_low_water = fc_high_water_mark - 8;
 802         if (adapter->hw.mac_type == e1000_80003es2lan)
 803                 adapter->hw.fc_pause_time = 0xFFFF;
 804         else
 805                 adapter->hw.fc_pause_time = E1000_FC_PAUSE_TIME;
 806         adapter->hw.fc_send_xon = 1;
 807         adapter->hw.fc = adapter->hw.original_fc;
 808
 809         /* Allow time for pending master requests to run */
 810         e1000_reset_hw(&adapter->hw);
 811         if (adapter->hw.mac_type >= e1000_82544)
 812                 E1000_WRITE_REG(&adapter->hw, WUC, 0);
 813
 814         if (e1000_init_hw(&adapter->hw))
 815                 DPRINTK(PROBE, ERR, "Hardware Error\n");
 816         e1000_update_mng_vlan(adapter);
 817
 818         /* if (adapter->hwflags & HWFLAGS_PHY_PWR_BIT) { */
 819         if (adapter->hw.mac_type >= e1000_82544 &&
 820             adapter->hw.mac_type <= e1000_82547_rev_2 &&
 821             adapter->hw.autoneg == 1 &&
 822             adapter->hw.autoneg_advertised == ADVERTISE_1000_FULL) {
 823                 uint32_t ctrl = E1000_READ_REG(&adapter->hw, CTRL);
 824                 /* clear phy power management bit if we are in gig only mode,
 825                  * which if enabled will attempt negotiation to 100Mb, which
 826                  * can cause a loss of link at power off or driver unload */
 827                 ctrl &= ~E1000_CTRL_SWDPIN3;
 828                 E1000_WRITE_REG(&adapter->hw, CTRL, ctrl);
 829         }
 830
 831         /* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */
 832         E1000_WRITE_REG(&adapter->hw, VET, ETHERNET_IEEE_VLAN_TYPE);
 833
 834         e1000_reset_adaptive(&adapter->hw);
 835         e1000_phy_get_info(&adapter->hw, &adapter->phy_info);
 836
 837         if (!adapter->smart_power_down &&
 838             (adapter->hw.mac_type == e1000_82571 ||
 839              adapter->hw.mac_type == e1000_82572)) {
 840                 uint16_t phy_data = 0;
 841                 /* speed up time to link by disabling smart power down, ignore
 842                  * the return value of this function because there is nothing
 843                  * different we would do if it failed */
 844                 e1000_read_phy_reg(&adapter->hw, IGP02E1000_PHY_POWER_MGMT,
 845                                    &phy_data);
 846                 phy_data &= ~IGP02E1000_PM_SPD;
 847                 e1000_write_phy_reg(&adapter->hw, IGP02E1000_PHY_POWER_MGMT,
 848                                     phy_data);
 849         }
 850
 851         e1000_release_manageability(adapter);
 852 }
 853
 854 /**
 855  * e1000_probe - Device Initialization Routine
 856  * @pdev: PCI device information struct
 857  * @ent: entry in e1000_pci_tbl
 858  *
 859  * Returns 0 on success, negative on failure
 860  *
 861  * e1000_probe initializes an adapter identified by a pci_dev structure.
 862  * The OS initialization, configuring of the adapter private structure,
 863  * and a hardware reset occur.
 864  **/
 865
 866 static int __devinit
 867 e1000_probe(struct pci_dev *pdev,
 868             const struct pci_device_id *ent)
 869 {
 870         struct net_device *netdev;
 871         struct e1000_adapter *adapter;
 872         unsigned long mmio_start, mmio_len;
 873         unsigned long flash_start, flash_len;
 874
 875         static int cards_found = 0;
 876         static int global_quad_port_a = 0; /* global ksp3 port a indication */
 877         int i, err, pci_using_dac;
 878         uint16_t eeprom_data = 0;
 879         uint16_t eeprom_apme_mask = E1000_EEPROM_APME;
 880         if ((err = pci_enable_device(pdev)))
 881                 return err;
 882
 883         if (!(err = pci_set_dma_mask(pdev, DMA_64BIT_MASK)) &&
 884             !(err = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK))) {
 885                 pci_using_dac = 1;
 886         } else {
 887                 if ((err = pci_set_dma_mask(pdev, DMA_32BIT_MASK)) &&
 888                     (err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK))) {
 889                         E1000_ERR("No usable DMA configuration, aborting\n");
 890                         goto err_dma;
 891                 }
 892                 pci_using_dac = 0;
 893         }
 894
 895         if ((err = pci_request_regions(pdev, e1000_driver_name)))
 896                 goto err_pci_reg;
 897
 898         pci_set_master(pdev);
 899
 900         err = -ENOMEM;
 901         netdev = alloc_etherdev(sizeof(struct e1000_adapter));
 902         if (!netdev)
 903                 goto err_alloc_etherdev;
 904
 905         SET_MODULE_OWNER(netdev);
 906         SET_NETDEV_DEV(netdev, &pdev->dev);
 907
 908         pci_set_drvdata(pdev, netdev);
 909         adapter = netdev_priv(netdev);
 910         adapter->netdev = netdev;
 911         adapter->pdev = pdev;
 912         adapter->hw.back = adapter;
 913         adapter->msg_enable = (1 << debug) - 1;
 914
 915         mmio_start = pci_resource_start(pdev, BAR_0);
 916         mmio_len = pci_resource_len(pdev, BAR_0);
 917
 918         err = -EIO;
 919         adapter->hw.hw_addr = ioremap(mmio_start, mmio_len);
 920         if (!adapter->hw.hw_addr)
 921                 goto err_ioremap;
 922
 923         for (i = BAR_1; i <= BAR_5; i++) {
 924                 if (pci_resource_len(pdev, i) == 0)
 925                         continue;
 926                 if (pci_resource_flags(pdev, i) & IORESOURCE_IO) {
 927                         adapter->hw.io_base = pci_resource_start(pdev, i);
 928                         break;
 929                 }
 930         }
 931
 932         netdev->open = &e1000_open;
 933         netdev->stop = &e1000_close;
 934         netdev->hard_start_xmit = &e1000_xmit_frame;
 935         netdev->get_stats = &e1000_get_stats;
 936         netdev->set_multicast_list = &e1000_set_multi;
 937         netdev->set_mac_address = &e1000_set_mac;
 938         netdev->change_mtu = &e1000_change_mtu;
 939         netdev->do_ioctl = &e1000_ioctl;
 940         e1000_set_ethtool_ops(netdev);
 941         netdev->tx_timeout = &e1000_tx_timeout;
 942         netdev->watchdog_timeo = 5 * HZ;
 943 #ifdef CONFIG_E1000_NAPI
 944         netdev->poll = &e1000_clean;
 945         netdev->weight = 64;
 946 #endif
 947         netdev->vlan_rx_register = e1000_vlan_rx_register;
 948         netdev->vlan_rx_add_vid = e1000_vlan_rx_add_vid;
 949         netdev->vlan_rx_kill_vid = e1000_vlan_rx_kill_vid;
 950 #ifdef CONFIG_NET_POLL_CONTROLLER
 951         netdev->poll_controller = e1000_netpoll;
 952 #endif
 953         strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1);
 954
 955         netdev->mem_start = mmio_start;
 956         netdev->mem_end = mmio_start + mmio_len;
 957         netdev->base_addr = adapter->hw.io_base;
 958
 959         adapter->bd_number = cards_found;
 960
 961         /* setup the private structure */
 962
 963         if ((err = e1000_sw_init(adapter)))
 964                 goto err_sw_init;
 965
 966         err = -EIO;
 967         /* Flash BAR mapping must happen after e1000_sw_init
 968          * because it depends on mac_type */
 969         if ((adapter->hw.mac_type == e1000_ich8lan) &&
 970            (pci_resource_flags(pdev, 1) & IORESOURCE_MEM)) {
 971                 flash_start = pci_resource_start(pdev, 1);
 972                 flash_len = pci_resource_len(pdev, 1);
 973                 adapter->hw.flash_address = ioremap(flash_start, flash_len);
 974                 if (!adapter->hw.flash_address)
 975                         goto err_flashmap;
 976         }
 977
 978         if (e1000_check_phy_reset_block(&adapter->hw))
 979                 DPRINTK(PROBE, INFO, "PHY reset is blocked due to SOL/IDER session.\n");
 980
 981         if (adapter->hw.mac_type >= e1000_82543) {
 982                 netdev->features = NETIF_F_SG |
 983                                    NETIF_F_HW_CSUM |
 984                                    NETIF_F_HW_VLAN_TX |
 985                                    NETIF_F_HW_VLAN_RX |
 986                                    NETIF_F_HW_VLAN_FILTER;
 987                 if (adapter->hw.mac_type == e1000_ich8lan)
 988                         netdev->features &= ~NETIF_F_HW_VLAN_FILTER;
 989         }
 990
 991         if ((adapter->hw.mac_type >= e1000_82544) &&
 992            (adapter->hw.mac_type != e1000_82547))
 993                 netdev->features |= NETIF_F_TSO;
 994
 995         if (adapter->hw.mac_type > e1000_82547_rev_2)
 996                 netdev->features |= NETIF_F_TSO6;
 997         if (pci_using_dac)
 998                 netdev->features |= NETIF_F_HIGHDMA;
 999
1000         netdev->features |= NETIF_F_LLTX;
1001
1002         adapter->en_mng_pt = e1000_enable_mng_pass_thru(&adapter->hw);
1003
1004         /* initialize eeprom parameters */
1005
1006         if (e1000_init_eeprom_params(&adapter->hw)) {
1007                 E1000_ERR("EEPROM initialization failed\n");
1008                 goto err_eeprom;
1009         }
1010
1011         /* before reading the EEPROM, reset the controller to
1012          * put the device in a known good starting state */
1013
1014         e1000_reset_hw(&adapter->hw);
1015
1016         /* make sure the EEPROM is good */
1017
1018         if (e1000_validate_eeprom_checksum(&adapter->hw) < 0) {
1019                 DPRINTK(PROBE, ERR, "The EEPROM Checksum Is Not Valid\n");
1020                 goto err_eeprom;
1021         }
1022
1023         /* copy the MAC address out of the EEPROM */
1024
1025         if (e1000_read_mac_addr(&adapter->hw))
1026                 DPRINTK(PROBE, ERR, "EEPROM Read Error\n");
1027         memcpy(netdev->dev_addr, adapter->hw.mac_addr, netdev->addr_len);
1028         memcpy(netdev->perm_addr, adapter->hw.mac_addr, netdev->addr_len);
1029
1030         if (!is_valid_ether_addr(netdev->perm_addr)) {
1031                 DPRINTK(PROBE, ERR, "Invalid MAC Address\n");
1032                 goto err_eeprom;
1033         }
1034
1035         e1000_get_bus_info(&adapter->hw);
1036
1037         init_timer(&adapter->tx_fifo_stall_timer);
1038         adapter->tx_fifo_stall_timer.function = &e1000_82547_tx_fifo_stall;
1039         adapter->tx_fifo_stall_timer.data = (unsigned long) adapter;
1040
1041         init_timer(&adapter->watchdog_timer);
1042         adapter->watchdog_timer.function = &e1000_watchdog;
1043         adapter->watchdog_timer.data = (unsigned long) adapter;
1044
1045         init_timer(&adapter->phy_info_timer);
1046         adapter->phy_info_timer.function = &e1000_update_phy_info;
1047         adapter->phy_info_timer.data = (unsigned long) adapter;
1048
1049         INIT_WORK(&adapter->reset_task, e1000_reset_task);
1050
1051         e1000_check_options(adapter);
1052
1053         /* Initial Wake on LAN setting
1054          * If APM wake is enabled in the EEPROM,
1055          * enable the ACPI Magic Packet filter
1056          */
1057
1058         switch (adapter->hw.mac_type) {
1059         case e1000_82542_rev2_0:
1060         case e1000_82542_rev2_1:
1061         case e1000_82543:
1062                 break;
1063         case e1000_82544:
1064                 e1000_read_eeprom(&adapter->hw,
1065                         EEPROM_INIT_CONTROL2_REG, 1, &eeprom_data);
1066                 eeprom_apme_mask = E1000_EEPROM_82544_APM;
1067                 break;
1068         case e1000_ich8lan:
1069                 e1000_read_eeprom(&adapter->hw,
1070                         EEPROM_INIT_CONTROL1_REG, 1, &eeprom_data);
1071                 eeprom_apme_mask = E1000_EEPROM_ICH8_APME;
1072                 break;
1073         case e1000_82546:
1074         case e1000_82546_rev_3:
1075         case e1000_82571:
1076         case e1000_80003es2lan:
1077                 if (E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_FUNC_1){
1078                         e1000_read_eeprom(&adapter->hw,
1079                                 EEPROM_INIT_CONTROL3_PORT_B, 1, &eeprom_data);
1080                         break;
1081                 }
1082                 /* Fall Through */
1083         default:
1084                 e1000_read_eeprom(&adapter->hw,
1085                         EEPROM_INIT_CONTROL3_PORT_A, 1, &eeprom_data);
1086                 break;
1087         }
1088         if (eeprom_data & eeprom_apme_mask)
1089                 adapter->eeprom_wol |= E1000_WUFC_MAG;
1090
1091         /* now that we have the eeprom settings, apply the special cases
1092          * where the eeprom may be wrong or the board simply won't support
1093          * wake on lan on a particular port */
1094         switch (pdev->device) {
1095         case E1000_DEV_ID_82546GB_PCIE:
1096                 adapter->eeprom_wol = 0;
1097                 break;
1098         case E1000_DEV_ID_82546EB_FIBER:
1099         case E1000_DEV_ID_82546GB_FIBER:
1100         case E1000_DEV_ID_82571EB_FIBER:
1101                 /* Wake events only supported on port A for dual fiber
1102                  * regardless of eeprom setting */
1103                 if (E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_FUNC_1)
1104                         adapter->eeprom_wol = 0;
1105                 break;
1106         case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
1107         case E1000_DEV_ID_82571EB_QUAD_COPPER:
1108         case E1000_DEV_ID_82571EB_QUAD_COPPER_LOWPROFILE:
1109                 /* if quad port adapter, disable WoL on all but port A */
1110                 if (global_quad_port_a != 0)
1111                         adapter->eeprom_wol = 0;
1112                 else
1113                         adapter->quad_port_a = 1;
1114                 /* Reset for multiple quad port adapters */
1115                 if (++global_quad_port_a == 4)
1116                         global_quad_port_a = 0;
1117                 break;
1118         }
1119
1120         /* initialize the wol settings based on the eeprom settings */
1121         adapter->wol = adapter->eeprom_wol;
1122
1123         /* print bus type/speed/width info */
1124         {
1125         struct e1000_hw *hw = &adapter->hw;
1126         DPRINTK(PROBE, INFO, "(PCI%s:%s:%s) ",
1127                 ((hw->bus_type == e1000_bus_type_pcix) ? "-X" :
1128                  (hw->bus_type == e1000_bus_type_pci_express ? " Express":"")),
1129                 ((hw->bus_speed == e1000_bus_speed_2500) ? "2.5Gb/s" :
1130                  (hw->bus_speed == e1000_bus_speed_133) ? "133MHz" :
1131                  (hw->bus_speed == e1000_bus_speed_120) ? "120MHz" :
1132                  (hw->bus_speed == e1000_bus_speed_100) ? "100MHz" :
1133                  (hw->bus_speed == e1000_bus_speed_66) ? "66MHz" : "33MHz"),
1134                 ((hw->bus_width == e1000_bus_width_64) ? "64-bit" :
1135                  (hw->bus_width == e1000_bus_width_pciex_4) ? "Width x4" :
1136                  (hw->bus_width == e1000_bus_width_pciex_1) ? "Width x1" :
1137                  "32-bit"));
1138         }
1139
1140         for (i = 0; i < 6; i++)
1141                 printk("%2.2x%c", netdev->dev_addr[i], i == 5 ? '\n' : ':');
1142
1143         /* reset the hardware with the new settings */
1144         e1000_reset(adapter);
1145
1146         /* If the controller is 82573 and f/w is AMT, do not set
1147          * DRV_LOAD until the interface is up.  For all other cases,
1148          * let the f/w know that the h/w is now under the control
1149          * of the driver. */
1150         if (adapter->hw.mac_type != e1000_82573 ||
1151             !e1000_check_mng_mode(&adapter->hw))
1152                 e1000_get_hw_control(adapter);
1153
1154         strcpy(netdev->name, "eth%d");
1155         if ((err = register_netdev(netdev)))
1156                 goto err_register;
1157
1158         /* tell the stack to leave us alone until e1000_open() is called */
1159         netif_carrier_off(netdev);
1160         netif_stop_queue(netdev);
1161
1162         DPRINTK(PROBE, INFO, "Intel(R) PRO/1000 Network Connection\n");
1163
1164         cards_found++;
1165         return 0;
1166
1167 err_register:
1168         e1000_release_hw_control(adapter);
1169 err_eeprom:
1170         if (!e1000_check_phy_reset_block(&adapter->hw))
1171                 e1000_phy_hw_reset(&adapter->hw);
1172
1173         if (adapter->hw.flash_address)
1174                 iounmap(adapter->hw.flash_address);
1175 err_flashmap:
1176 #ifdef CONFIG_E1000_NAPI
1177         for (i = 0; i < adapter->num_rx_queues; i++)
1178                 dev_put(&adapter->polling_netdev[i]);
1179 #endif
1180
1181         kfree(adapter->tx_ring);
1182         kfree(adapter->rx_ring);
1183 #ifdef CONFIG_E1000_NAPI
1184         kfree(adapter->polling_netdev);
1185 #endif
1186 err_sw_init:
1187         iounmap(adapter->hw.hw_addr);
1188 err_ioremap:
1189         free_netdev(netdev);
1190 err_alloc_etherdev:
1191         pci_release_regions(pdev);
1192 err_pci_reg:
1193 err_dma:
1194         pci_disable_device(pdev);
1195         return err;
1196 }
1197
1198 /**
1199  * e1000_remove - Device Removal Routine
1200  * @pdev: PCI device information struct
1201  *
1202  * e1000_remove is called by the PCI subsystem to alert the driver
1203  * that it should release a PCI device.  The could be caused by a
1204  * Hot-Plug event, or because the driver is going to be removed from
1205  * memory.
1206  **/
1207
1208 static void __devexit
1209 e1000_remove(struct pci_dev *pdev)
1210 {
1211         struct net_device *netdev = pci_get_drvdata(pdev);
1212         struct e1000_adapter *adapter = netdev_priv(netdev);
1213 #ifdef CONFIG_E1000_NAPI
1214         int i;
1215 #endif
1216
1217         flush_scheduled_work();
1218
1219         e1000_release_manageability(adapter);
1220
1221         /* Release control of h/w to f/w.  If f/w is AMT enabled, this
1222          * would have already happened in close and is redundant. */
1223         e1000_release_hw_control(adapter);
1224
1225         unregister_netdev(netdev);
1226 #ifdef CONFIG_E1000_NAPI
1227         for (i = 0; i < adapter->num_rx_queues; i++)
1228                 dev_put(&adapter->polling_netdev[i]);
1229 #endif
1230
1231         if (!e1000_check_phy_reset_block(&adapter->hw))
1232                 e1000_phy_hw_reset(&adapter->hw);
1233
1234         kfree(adapter->tx_ring);
1235         kfree(adapter->rx_ring);
1236 #ifdef CONFIG_E1000_NAPI
1237         kfree(adapter->polling_netdev);
1238 #endif
1239
1240         iounmap(adapter->hw.hw_addr);
1241         if (adapter->hw.flash_address)
1242                 iounmap(adapter->hw.flash_address);
1243         pci_release_regions(pdev);
1244
1245         free_netdev(netdev);
1246
1247         pci_disable_device(pdev);
1248 }
1249
1250 /**
1251  * e1000_sw_init - Initialize general software structures (struct e1000_adapter)
1252  * @adapter: board private structure to initialize
1253  *
1254  * e1000_sw_init initializes the Adapter private data structure.
1255  * Fields are initialized based on PCI device information and
1256  * OS network device settings (MTU size).
1257  **/
1258
1259 static int __devinit
1260 e1000_sw_init(struct e1000_adapter *adapter)
1261 {
1262         struct e1000_hw *hw = &adapter->hw;
1263         struct net_device *netdev = adapter->netdev;
1264         struct pci_dev *pdev = adapter->pdev;
1265 #ifdef CONFIG_E1000_NAPI
1266         int i;
1267 #endif
1268
1269         /* PCI config space info */
1270
1271         hw->vendor_id = pdev->vendor;
1272         hw->device_id = pdev->device;
1273         hw->subsystem_vendor_id = pdev->subsystem_vendor;
1274         hw->subsystem_id = pdev->subsystem_device;
1275
1276         pci_read_config_byte(pdev, PCI_REVISION_ID, &hw->revision_id);
1277
1278         pci_read_config_word(pdev, PCI_COMMAND, &hw->pci_cmd_word);
1279
1280         adapter->rx_buffer_len = MAXIMUM_ETHERNET_VLAN_SIZE;
1281         adapter->rx_ps_bsize0 = E1000_RXBUFFER_128;
1282         hw->max_frame_size = netdev->mtu +
1283                              ENET_HEADER_SIZE + ETHERNET_FCS_SIZE;
1284         hw->min_frame_size = MINIMUM_ETHERNET_FRAME_SIZE;
1285
1286         /* identify the MAC */
1287
1288         if (e1000_set_mac_type(hw)) {
1289                 DPRINTK(PROBE, ERR, "Unknown MAC Type\n");
1290                 return -EIO;
1291         }
1292
1293         switch (hw->mac_type) {
1294         default:
1295                 break;
1296         case e1000_82541:
1297         case e1000_82547:
1298         case e1000_82541_rev_2:
1299         case e1000_82547_rev_2:
1300                 hw->phy_init_script = 1;
1301                 break;
1302         }
1303
1304         e1000_set_media_type(hw);
1305
1306         hw->wait_autoneg_complete = FALSE;
1307         hw->tbi_compatibility_en = TRUE;
1308         hw->adaptive_ifs = TRUE;
1309
1310         /* Copper options */
1311
1312         if (hw->media_type == e1000_media_type_copper) {
1313                 hw->mdix = AUTO_ALL_MODES;
1314                 hw->disable_polarity_correction = FALSE;
1315                 hw->master_slave = E1000_MASTER_SLAVE;
1316         }
1317
1318         adapter->num_tx_queues = 1;
1319         adapter->num_rx_queues = 1;
1320
1321         if (e1000_alloc_queues(adapter)) {
1322                 DPRINTK(PROBE, ERR, "Unable to allocate memory for queues\n");
1323                 return -ENOMEM;
1324         }
1325
1326 #ifdef CONFIG_E1000_NAPI
1327         for (i = 0; i < adapter->num_rx_queues; i++) {
1328                 adapter->polling_netdev[i].priv = adapter;
1329                 adapter->polling_netdev[i].poll = &e1000_clean;
1330                 adapter->polling_netdev[i].weight = 64;
1331                 dev_hold(&adapter->polling_netdev[i]);
1332                 set_bit(__LINK_STATE_START, &adapter->polling_netdev[i].state);
1333         }
1334         spin_lock_init(&adapter->tx_queue_lock);
1335 #endif
1336
1337         atomic_set(&adapter->irq_sem, 1);
1338         spin_lock_init(&adapter->stats_lock);
1339
1340         set_bit(__E1000_DOWN, &adapter->flags);
1341
1342         return 0;
1343 }
1344
1345 /**
1346  * e1000_alloc_queues - Allocate memory for all rings
1347  * @adapter: board private structure to initialize
1348  *
1349  * We allocate one ring per queue at run-time since we don't know the
1350  * number of queues at compile-time.  The polling_netdev array is
1351  * intended for Multiqueue, but should work fine with a single queue.
1352  **/
1353
1354 static int __devinit
1355 e1000_alloc_queues(struct e1000_adapter *adapter)
1356 {
1357         int size;
1358
1359         size = sizeof(struct e1000_tx_ring) * adapter->num_tx_queues;
1360         adapter->tx_ring = kmalloc(size, GFP_KERNEL);
1361         if (!adapter->tx_ring)
1362                 return -ENOMEM;
1363         memset(adapter->tx_ring, 0, size);
1364
1365         size = sizeof(struct e1000_rx_ring) * adapter->num_rx_queues;
1366         adapter->rx_ring = kmalloc(size, GFP_KERNEL);
1367         if (!adapter->rx_ring) {
1368                 kfree(adapter->tx_ring);
1369                 return -ENOMEM;
1370         }
1371         memset(adapter->rx_ring, 0, size);
1372
1373 #ifdef CONFIG_E1000_NAPI
1374         size = sizeof(struct net_device) * adapter->num_rx_queues;
1375         adapter->polling_netdev = kmalloc(size, GFP_KERNEL);
1376         if (!adapter->polling_netdev) {
1377                 kfree(adapter->tx_ring);
1378                 kfree(adapter->rx_ring);
1379                 return -ENOMEM;
1380         }
1381         memset(adapter->polling_netdev, 0, size);
1382 #endif
1383
1384         return E1000_SUCCESS;
1385 }
1386
1387 /**
1388  * e1000_open - Called when a network interface is made active
1389  * @netdev: network interface device structure
1390  *
1391  * Returns 0 on success, negative value on failure
1392  *
1393  * The open entry point is called when a network interface is made
1394  * active by the system (IFF_UP).  At this point all resources needed
1395  * for transmit and receive operations are allocated, the interrupt
1396  * handler is registered with the OS, the watchdog timer is started,
1397  * and the stack is notified that the interface is ready.
1398  **/
1399
1400 static int
1401 e1000_open(struct net_device *netdev)
1402 {
1403         struct e1000_adapter *adapter = netdev_priv(netdev);
1404         int err;
1405
1406         /* disallow open during test */
1407         if (test_bit(__E1000_TESTING, &adapter->flags))
1408                 return -EBUSY;
1409
1410         /* allocate transmit descriptors */
1411         err = e1000_setup_all_tx_resources(adapter);
1412         if (err)
1413                 goto err_setup_tx;
1414
1415         /* allocate receive descriptors */
1416         err = e1000_setup_all_rx_resources(adapter);
1417         if (err)
1418                 goto err_setup_rx;
1419
1420         e1000_power_up_phy(adapter);
1421
1422         adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
1423         if ((adapter->hw.mng_cookie.status &
1424                           E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT)) {
1425                 e1000_update_mng_vlan(adapter);
1426         }
1427
1428         /* If AMT is enabled, let the firmware know that the network
1429          * interface is now open */
1430         if (adapter->hw.mac_type == e1000_82573 &&
1431             e1000_check_mng_mode(&adapter->hw))
1432                 e1000_get_hw_control(adapter);
1433
1434         /* before we allocate an interrupt, we must be ready to handle it.
1435          * Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt
1436          * as soon as we call pci_request_irq, so we have to setup our
1437          * clean_rx handler before we do so.  */
1438         e1000_configure(adapter);
1439
1440         err = e1000_request_irq(adapter);
1441         if (err)
1442                 goto err_req_irq;
1443
1444         /* From here on the code is the same as e1000_up() */
1445         clear_bit(__E1000_DOWN, &adapter->flags);
1446
1447 #ifdef CONFIG_E1000_NAPI
1448         netif_poll_enable(netdev);
1449 #endif
1450
1451         e1000_irq_enable(adapter);
1452
1453         /* fire a link status change interrupt to start the watchdog */
1454         E1000_WRITE_REG(&adapter->hw, ICS, E1000_ICS_LSC);
1455
1456         return E1000_SUCCESS;
1457
1458 err_req_irq:
1459         e1000_release_hw_control(adapter);
1460         e1000_power_down_phy(adapter);
1461         e1000_free_all_rx_resources(adapter);
1462 err_setup_rx:
1463         e1000_free_all_tx_resources(adapter);
1464 err_setup_tx:
1465         e1000_reset(adapter);
1466
1467         return err;
1468 }
1469
1470 /**
1471  * e1000_close - Disables a network interface
1472  * @netdev: network interface device structure
1473  *
1474  * Returns 0, this is not allowed to fail
1475  *
1476  * The close entry point is called when an interface is de-activated
1477  * by the OS.  The hardware is still under the drivers control, but
1478  * needs to be disabled.  A global MAC reset is issued to stop the
1479  * hardware, and all transmit and receive resources are freed.
1480  **/
1481
1482 static int
1483 e1000_close(struct net_device *netdev)
1484 {
1485         struct e1000_adapter *adapter = netdev_priv(netdev);
1486
1487         WARN_ON(test_bit(__E1000_RESETTING, &adapter->flags));
1488         e1000_down(adapter);
1489         e1000_power_down_phy(adapter);
1490         e1000_free_irq(adapter);
1491
1492         e1000_free_all_tx_resources(adapter);
1493         e1000_free_all_rx_resources(adapter);
1494
1495         /* kill manageability vlan ID if supported, but not if a vlan with
1496          * the same ID is registered on the host OS (let 8021q kill it) */
1497         if ((adapter->hw.mng_cookie.status &
1498                           E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) &&
1499              !(adapter->vlgrp &&
1500                vlan_group_get_device(adapter->vlgrp, adapter->mng_vlan_id))) {
1501                 e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id);
1502         }
1503
1504         /* If AMT is enabled, let the firmware know that the network
1505          * interface is now closed */
1506         if (adapter->hw.mac_type == e1000_82573 &&
1507             e1000_check_mng_mode(&adapter->hw))
1508                 e1000_release_hw_control(adapter);
1509
1510         return 0;
1511 }
1512
1513 /**
1514  * e1000_check_64k_bound - check that memory doesn't cross 64kB boundary
1515  * @adapter: address of board private structure
1516  * @start: address of beginning of memory
1517  * @len: length of memory
1518  **/
1519 static boolean_t
1520 e1000_check_64k_bound(struct e1000_adapter *adapter,
1521                       void *start, unsigned long len)
1522 {
1523         unsigned long begin = (unsigned long) start;
1524         unsigned long end = begin + len;
1525
1526         /* First rev 82545 and 82546 need to not allow any memory
1527          * write location to cross 64k boundary due to errata 23 */
1528         if (adapter->hw.mac_type == e1000_82545 ||
1529             adapter->hw.mac_type == e1000_82546) {
1530                 return ((begin ^ (end - 1)) >> 16) != 0 ? FALSE : TRUE;
1531         }
1532
1533         return TRUE;
1534 }
1535
1536 /**
1537  * e1000_setup_tx_resources - allocate Tx resources (Descriptors)
1538  * @adapter: board private structure
1539  * @txdr:    tx descriptor ring (for a specific queue) to setup
1540  *
1541  * Return 0 on success, negative on failure
1542  **/
1543
1544 static int
1545 e1000_setup_tx_resources(struct e1000_adapter *adapter,
1546                          struct e1000_tx_ring *txdr)
1547 {
1548         struct pci_dev *pdev = adapter->pdev;
1549         int size;
1550
1551         size = sizeof(struct e1000_buffer) * txdr->count;
1552         txdr->buffer_info = vmalloc(size);
1553         if (!txdr->buffer_info) {
1554                 DPRINTK(PROBE, ERR,
1555                 "Unable to allocate memory for the transmit descriptor ring\n");
1556                 return -ENOMEM;
1557         }
1558         memset(txdr->buffer_info, 0, size);
1559
1560         /* round up to nearest 4K */
1561
1562         txdr->size = txdr->count * sizeof(struct e1000_tx_desc);
1563         E1000_ROUNDUP(txdr->size, 4096);
1564
1565         txdr->desc = pci_alloc_consistent(pdev, txdr->size, &txdr->dma);
1566         if (!txdr->desc) {
1567 setup_tx_desc_die:
1568                 vfree(txdr->buffer_info);
1569                 DPRINTK(PROBE, ERR,
1570                 "Unable to allocate memory for the transmit descriptor ring\n");
1571                 return -ENOMEM;
1572         }
1573
1574         /* Fix for errata 23, can't cross 64kB boundary */
1575         if (!e1000_check_64k_bound(adapter, txdr->desc, txdr->size)) {
1576                 void *olddesc = txdr->desc;
1577                 dma_addr_t olddma = txdr->dma;
1578                 DPRINTK(TX_ERR, ERR, "txdr align check failed: %u bytes "
1579                                      "at %p\n", txdr->size, txdr->desc);
1580                 /* Try again, without freeing the previous */
1581                 txdr->desc = pci_alloc_consistent(pdev, txdr->size, &txdr->dma);
1582                 /* Failed allocation, critical failure */
1583                 if (!txdr->desc) {
1584                         pci_free_consistent(pdev, txdr->size, olddesc, olddma);
1585                         goto setup_tx_desc_die;
1586                 }
1587
1588                 if (!e1000_check_64k_bound(adapter, txdr->desc, txdr->size)) {
1589                         /* give up */
1590                         pci_free_consistent(pdev, txdr->size, txdr->desc,
1591                                             txdr->dma);
1592                         pci_free_consistent(pdev, txdr->size, olddesc, olddma);
1593                         DPRINTK(PROBE, ERR,
1594                                 "Unable to allocate aligned memory "
1595                                 "for the transmit descriptor ring\n");
1596                         vfree(txdr->buffer_info);
1597                         return -ENOMEM;
1598                 } else {
1599                         /* Free old allocation, new allocation was successful */
1600                         pci_free_consistent(pdev, txdr->size, olddesc, olddma);
1601                 }
1602         }
1603         memset(txdr->desc, 0, txdr->size);
1604
1605         txdr->next_to_use = 0;
1606         txdr->next_to_clean = 0;
1607         spin_lock_init(&txdr->tx_lock);
1608
1609         return 0;
1610 }
1611
1612 /**
1613  * e1000_setup_all_tx_resources - wrapper to allocate Tx resources
1614  *                                (Descriptors) for all queues
1615  * @adapter: board private structure
1616  *
1617  * Return 0 on success, negative on failure
1618  **/
1619
1620 int
1621 e1000_setup_all_tx_resources(struct e1000_adapter *adapter)
1622 {
1623         int i, err = 0;
1624
1625         for (i = 0; i < adapter->num_tx_queues; i++) {
1626                 err = e1000_setup_tx_resources(adapter, &adapter->tx_ring[i]);
1627                 if (err) {
1628                         DPRINTK(PROBE, ERR,
1629                                 "Allocation for Tx Queue %u failed\n", i);
1630                         for (i-- ; i >= 0; i--)
1631                                 e1000_free_tx_resources(adapter,
1632                                                         &adapter->tx_ring[i]);
1633                         break;
1634                 }
1635         }
1636
1637         return err;
1638 }
1639
1640 /**
1641  * e1000_configure_tx - Configure 8254x Transmit Unit after Reset
1642  * @adapter: board private structure
1643  *
1644  * Configure the Tx unit of the MAC after a reset.
1645  **/
1646
1647 static void
1648 e1000_configure_tx(struct e1000_adapter *adapter)
1649 {
1650         uint64_t tdba;
1651         struct e1000_hw *hw = &adapter->hw;
1652         uint32_t tdlen, tctl, tipg, tarc;
1653         uint32_t ipgr1, ipgr2;
1654
1655         /* Setup the HW Tx Head and Tail descriptor pointers */
1656
1657         switch (adapter->num_tx_queues) {
1658         case 1:
1659         default:
1660                 tdba = adapter->tx_ring[0].dma;
1661                 tdlen = adapter->tx_ring[0].count *
1662                         sizeof(struct e1000_tx_desc);
1663                 E1000_WRITE_REG(hw, TDLEN, tdlen);
1664                 E1000_WRITE_REG(hw, TDBAH, (tdba >> 32));
1665                 E1000_WRITE_REG(hw, TDBAL, (tdba & 0x00000000ffffffffULL));
1666                 E1000_WRITE_REG(hw, TDT, 0);
1667                 E1000_WRITE_REG(hw, TDH, 0);
1668                 adapter->tx_ring[0].tdh = ((hw->mac_type >= e1000_82543) ? E1000_TDH : E1000_82542_TDH);
1669                 adapter->tx_ring[0].tdt = ((hw->mac_type >= e1000_82543) ? E1000_TDT : E1000_82542_TDT);
1670                 break;
1671         }
1672
1673         /* Set the default values for the Tx Inter Packet Gap timer */
1674         if (adapter->hw.mac_type <= e1000_82547_rev_2 &&
1675             (hw->media_type == e1000_media_type_fiber ||
1676              hw->media_type == e1000_media_type_internal_serdes))
1677                 tipg = DEFAULT_82543_TIPG_IPGT_FIBER;
1678         else
1679                 tipg = DEFAULT_82543_TIPG_IPGT_COPPER;
1680
1681         switch (hw->mac_type) {
1682         case e1000_82542_rev2_0:
1683         case e1000_82542_rev2_1:
1684                 tipg = DEFAULT_82542_TIPG_IPGT;
1685                 ipgr1 = DEFAULT_82542_TIPG_IPGR1;
1686                 ipgr2 = DEFAULT_82542_TIPG_IPGR2;
1687                 break;
1688         case e1000_80003es2lan:
1689                 ipgr1 = DEFAULT_82543_TIPG_IPGR1;
1690                 ipgr2 = DEFAULT_80003ES2LAN_TIPG_IPGR2;
1691                 break;
1692         default:
1693                 ipgr1 = DEFAULT_82543_TIPG_IPGR1;
1694                 ipgr2 = DEFAULT_82543_TIPG_IPGR2;
1695                 break;
1696         }
1697         tipg |= ipgr1 << E1000_TIPG_IPGR1_SHIFT;
1698         tipg |= ipgr2 << E1000_TIPG_IPGR2_SHIFT;
1699         E1000_WRITE_REG(hw, TIPG, tipg);
1700
1701         /* Set the Tx Interrupt Delay register */
1702
1703         E1000_WRITE_REG(hw, TIDV, adapter->tx_int_delay);
1704         if (hw->mac_type >= e1000_82540)
1705                 E1000_WRITE_REG(hw, TADV, adapter->tx_abs_int_delay);
1706
1707         /* Program the Transmit Control Register */
1708
1709         tctl = E1000_READ_REG(hw, TCTL);
1710         tctl &= ~E1000_TCTL_CT;
1711         tctl |= E1000_TCTL_PSP | E1000_TCTL_RTLC |
1712                 (E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT);
1713
1714         if (hw->mac_type == e1000_82571 || hw->mac_type == e1000_82572) {
1715                 tarc = E1000_READ_REG(hw, TARC0);
1716                 /* set the speed mode bit, we'll clear it if we're not at
1717                  * gigabit link later */
1718                 tarc |= (1 << 21);
1719                 E1000_WRITE_REG(hw, TARC0, tarc);
1720         } else if (hw->mac_type == e1000_80003es2lan) {
1721                 tarc = E1000_READ_REG(hw, TARC0);
1722                 tarc |= 1;
1723                 E1000_WRITE_REG(hw, TARC0, tarc);
1724                 tarc = E1000_READ_REG(hw, TARC1);
1725                 tarc |= 1;
1726                 E1000_WRITE_REG(hw, TARC1, tarc);
1727         }
1728
1729         e1000_config_collision_dist(hw);
1730
1731         /* Setup Transmit Descriptor Settings for eop descriptor */
1732         adapter->txd_cmd = E1000_TXD_CMD_EOP | E1000_TXD_CMD_IFCS;
1733
1734         /* only set IDE if we are delaying interrupts using the timers */
1735         if (adapter->tx_int_delay)
1736                 adapter->txd_cmd |= E1000_TXD_CMD_IDE;
1737
1738         if (hw->mac_type < e1000_82543)
1739                 adapter->txd_cmd |= E1000_TXD_CMD_RPS;
1740         else
1741                 adapter->txd_cmd |= E1000_TXD_CMD_RS;
1742
1743         /* Cache if we're 82544 running in PCI-X because we'll
1744          * need this to apply a workaround later in the send path. */
1745         if (hw->mac_type == e1000_82544 &&
1746             hw->bus_type == e1000_bus_type_pcix)
1747                 adapter->pcix_82544 = 1;
1748
1749         E1000_WRITE_REG(hw, TCTL, tctl);
1750
1751 }
1752
1753 /**
1754  * e1000_setup_rx_resources - allocate Rx resources (Descriptors)
1755  * @adapter: board private structure
1756  * @rxdr:    rx descriptor ring (for a specific queue) to setup
1757  *
1758  * Returns 0 on success, negative on failure
1759  **/
1760
1761 static int
1762 e1000_setup_rx_resources(struct e1000_adapter *adapter,
1763                          struct e1000_rx_ring *rxdr)
1764 {
1765         struct pci_dev *pdev = adapter->pdev;
1766         int size, desc_len;
1767
1768         size = sizeof(struct e1000_buffer) * rxdr->count;
1769         rxdr->buffer_info = vmalloc(size);
1770         if (!rxdr->buffer_info) {
1771                 DPRINTK(PROBE, ERR,
1772                 "Unable to allocate memory for the receive descriptor ring\n");
1773                 return -ENOMEM;
1774         }
1775         memset(rxdr->buffer_info, 0, size);
1776
1777         size = sizeof(struct e1000_ps_page) * rxdr->count;
1778         rxdr->ps_page = kmalloc(size, GFP_KERNEL);
1779         if (!rxdr->ps_page) {
1780                 vfree(rxdr->buffer_info);
1781                 DPRINTK(PROBE, ERR,
1782                 "Unable to allocate memory for the receive descriptor ring\n");
1783                 return -ENOMEM;
1784         }
1785         memset(rxdr->ps_page, 0, size);
1786
1787         size = sizeof(struct e1000_ps_page_dma) * rxdr->count;
1788         rxdr->ps_page_dma = kmalloc(size, GFP_KERNEL);
1789         if (!rxdr->ps_page_dma) {
1790                 vfree(rxdr->buffer_info);
1791                 kfree(rxdr->ps_page);
1792                 DPRINTK(PROBE, ERR,
1793                 "Unable to allocate memory for the receive descriptor ring\n");
1794                 return -ENOMEM;
1795         }
1796         memset(rxdr->ps_page_dma, 0, size);
1797
1798         if (adapter->hw.mac_type <= e1000_82547_rev_2)
1799                 desc_len = sizeof(struct e1000_rx_desc);
1800         else
1801                 desc_len = sizeof(union e1000_rx_desc_packet_split);
1802
1803         /* Round up to nearest 4K */
1804
1805         rxdr->size = rxdr->count * desc_len;
1806         E1000_ROUNDUP(rxdr->size, 4096);
1807
1808         rxdr->desc = pci_alloc_consistent(pdev, rxdr->size, &rxdr->dma);
1809
1810         if (!rxdr->desc) {
1811                 DPRINTK(PROBE, ERR,
1812                 "Unable to allocate memory for the receive descriptor ring\n");
1813 setup_rx_desc_die:
1814                 vfree(rxdr->buffer_info);
1815                 kfree(rxdr->ps_page);
1816                 kfree(rxdr->ps_page_dma);
1817                 return -ENOMEM;
1818         }
1819
1820         /* Fix for errata 23, can't cross 64kB boundary */
1821         if (!e1000_check_64k_bound(adapter, rxdr->desc, rxdr->size)) {
1822                 void *olddesc = rxdr->desc;
1823                 dma_addr_t olddma = rxdr->dma;
1824                 DPRINTK(RX_ERR, ERR, "rxdr align check failed: %u bytes "
1825                                      "at %p\n", rxdr->size, rxdr->desc);
1826                 /* Try again, without freeing the previous */
1827                 rxdr->desc = pci_alloc_consistent(pdev, rxdr->size, &rxdr->dma);
1828                 /* Failed allocation, critical failure */
1829                 if (!rxdr->desc) {
1830                         pci_free_consistent(pdev, rxdr->size, olddesc, olddma);
1831                         DPRINTK(PROBE, ERR,
1832                                 "Unable to allocate memory "
1833                                 "for the receive descriptor ring\n");
1834                         goto setup_rx_desc_die;
1835                 }
1836
1837                 if (!e1000_check_64k_bound(adapter, rxdr->desc, rxdr->size)) {
1838                         /* give up */
1839                         pci_free_consistent(pdev, rxdr->size, rxdr->desc,
1840                                             rxdr->dma);
1841                         pci_free_consistent(pdev, rxdr->size, olddesc, olddma);
1842                         DPRINTK(PROBE, ERR,
1843                                 "Unable to allocate aligned memory "
1844                                 "for the receive descriptor ring\n");
1845                         goto setup_rx_desc_die;
1846                 } else {
1847                         /* Free old allocation, new allocation was successful */
1848                         pci_free_consistent(pdev, rxdr->size, olddesc, olddma);
1849                 }
1850         }
1851         memset(rxdr->desc, 0, rxdr->size);
1852
1853         rxdr->next_to_clean = 0;
1854         rxdr->next_to_use = 0;
1855
1856         return 0;
1857 }
1858
1859 /**
1860  * e1000_setup_all_rx_resources - wrapper to allocate Rx resources
1861  *                                (Descriptors) for all queues
1862  * @adapter: board private structure
1863  *
1864  * Return 0 on success, negative on failure
1865  **/
1866
1867 int
1868 e1000_setup_all_rx_resources(struct e1000_adapter *adapter)
1869 {
1870         int i, err = 0;
1871
1872         for (i = 0; i < adapter->num_rx_queues; i++) {
1873                 err = e1000_setup_rx_resources(adapter, &adapter->rx_ring[i]);
1874                 if (err) {
1875                         DPRINTK(PROBE, ERR,
1876                                 "Allocation for Rx Queue %u failed\n", i);
1877                         for (i-- ; i >= 0; i--)
1878                                 e1000_free_rx_resources(adapter,
1879                                                         &adapter->rx_ring[i]);
1880                         break;
1881                 }
1882         }
1883
1884         return err;
1885 }
1886
1887 /**
1888  * e1000_setup_rctl - configure the receive control registers
1889  * @adapter: Board private structure
1890  **/
1891 #define PAGE_USE_COUNT(S) (((S) >> PAGE_SHIFT) + \
1892                         (((S) & (PAGE_SIZE - 1)) ? 1 : 0))
1893 static void
1894 e1000_setup_rctl(struct e1000_adapter *adapter)
1895 {
1896         uint32_t rctl, rfctl;
1897         uint32_t psrctl = 0;
1898 #ifndef CONFIG_E1000_DISABLE_PACKET_SPLIT
1899         uint32_t pages = 0;
1900 #endif
1901
1902         rctl = E1000_READ_REG(&adapter->hw, RCTL);
1903
1904         rctl &= ~(3 << E1000_RCTL_MO_SHIFT);
1905
1906         rctl |= E1000_RCTL_EN | E1000_RCTL_BAM |
1907                 E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF |
1908                 (adapter->hw.mc_filter_type << E1000_RCTL_MO_SHIFT);
1909
1910         if (adapter->hw.tbi_compatibility_on == 1)
1911                 rctl |= E1000_RCTL_SBP;
1912         else
1913                 rctl &= ~E1000_RCTL_SBP;
1914
1915         if (adapter->netdev->mtu <= ETH_DATA_LEN)
1916                 rctl &= ~E1000_RCTL_LPE;
1917         else
1918                 rctl |= E1000_RCTL_LPE;
1919
1920         /* Setup buffer sizes */
1921         rctl &= ~E1000_RCTL_SZ_4096;
1922         rctl |= E1000_RCTL_BSEX;
1923         switch (adapter->rx_buffer_len) {
1924                 case E1000_RXBUFFER_256:
1925                         rctl |= E1000_RCTL_SZ_256;
1926                         rctl &= ~E1000_RCTL_BSEX;
1927                         break;
1928                 case E1000_RXBUFFER_512:
1929                         rctl |= E1000_RCTL_SZ_512;
1930                         rctl &= ~E1000_RCTL_BSEX;
1931                         break;
1932                 case E1000_RXBUFFER_1024:
1933                         rctl |= E1000_RCTL_SZ_1024;
1934                         rctl &= ~E1000_RCTL_BSEX;
1935                         break;
1936                 case E1000_RXBUFFER_2048:
1937                 default:
1938                         rctl |= E1000_RCTL_SZ_2048;
1939                         rctl &= ~E1000_RCTL_BSEX;
1940                         break;
1941                 case E1000_RXBUFFER_4096:
1942                         rctl |= E1000_RCTL_SZ_4096;
1943                         break;
1944                 case E1000_RXBUFFER_8192:
1945                         rctl |= E1000_RCTL_SZ_8192;
1946                         break;
1947                 case E1000_RXBUFFER_16384:
1948                         rctl |= E1000_RCTL_SZ_16384;
1949                         break;
1950         }
1951
1952 #ifndef CONFIG_E1000_DISABLE_PACKET_SPLIT
1953         /* 82571 and greater support packet-split where the protocol
1954          * header is placed in skb->data and the packet data is
1955          * placed in pages hanging off of skb_shinfo(skb)->nr_frags.
1956          * In the case of a non-split, skb->data is linearly filled,
1957          * followed by the page buffers.  Therefore, skb->data is
1958          * sized to hold the largest protocol header.
1959          */
1960         /* allocations using alloc_page take too long for regular MTU
1961          * so only enable packet split for jumbo frames */
1962         pages = PAGE_USE_COUNT(adapter->netdev->mtu);
1963         if ((adapter->hw.mac_type >= e1000_82571) && (pages <= 3) &&
1964             PAGE_SIZE <= 16384 && (rctl & E1000_RCTL_LPE))
1965                 adapter->rx_ps_pages = pages;
1966         else
1967                 adapter->rx_ps_pages = 0;
1968 #endif
1969         if (adapter->rx_ps_pages) {
1970                 /* Configure extra packet-split registers */
1971                 rfctl = E1000_READ_REG(&adapter->hw, RFCTL);
1972                 rfctl |= E1000_RFCTL_EXTEN;
1973                 /* disable packet split support for IPv6 extension headers,
1974                  * because some malformed IPv6 headers can hang the RX */
1975                 rfctl |= (E1000_RFCTL_IPV6_EX_DIS |
1976                           E1000_RFCTL_NEW_IPV6_EXT_DIS);
1977
1978                 E1000_WRITE_REG(&adapter->hw, RFCTL, rfctl);
1979
1980                 rctl |= E1000_RCTL_DTYP_PS;
1981
1982                 psrctl |= adapter->rx_ps_bsize0 >>
1983                         E1000_PSRCTL_BSIZE0_SHIFT;
1984
1985                 switch (adapter->rx_ps_pages) {
1986                 case 3:
1987                         psrctl |= PAGE_SIZE <<
1988                                 E1000_PSRCTL_BSIZE3_SHIFT;
1989                 case 2:
1990                         psrctl |= PAGE_SIZE <<
1991                                 E1000_PSRCTL_BSIZE2_SHIFT;
1992                 case 1:
1993                         psrctl |= PAGE_SIZE >>
1994                                 E1000_PSRCTL_BSIZE1_SHIFT;
1995                         break;
1996                 }
1997
1998                 E1000_WRITE_REG(&adapter->hw, PSRCTL, psrctl);
1999         }
2000
2001         E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
2002 }
2003
2004 /**
2005  * e1000_configure_rx - Configure 8254x Receive Unit after Reset
2006  * @adapter: board private structure
2007  *
2008  * Configure the Rx unit of the MAC after a reset.
2009  **/
2010
2011 static void
2012 e1000_configure_rx(struct e1000_adapter *adapter)
2013 {
2014         uint64_t rdba;
2015         struct e1000_hw *hw = &adapter->hw;
2016         uint32_t rdlen, rctl, rxcsum, ctrl_ext;
2017
2018         if (adapter->rx_ps_pages) {
2019                 /* this is a 32 byte descriptor */
2020                 rdlen = adapter->rx_ring[0].count *
2021                         sizeof(union e1000_rx_desc_packet_split);
2022                 adapter->clean_rx = e1000_clean_rx_irq_ps;
2023                 adapter->alloc_rx_buf = e1000_alloc_rx_buffers_ps;
2024         } else {
2025                 rdlen = adapter->rx_ring[0].count *
2026                         sizeof(struct e1000_rx_desc);
2027                 adapter->clean_rx = e1000_clean_rx_irq;
2028                 adapter->alloc_rx_buf = e1000_alloc_rx_buffers;
2029         }
2030
2031         /* disable receives while setting up the descriptors */
2032         rctl = E1000_READ_REG(hw, RCTL);
2033         E1000_WRITE_REG(hw, RCTL, rctl & ~E1000_RCTL_EN);
2034
2035         /* set the Receive Delay Timer Register */
2036         E1000_WRITE_REG(hw, RDTR, adapter->rx_int_delay);
2037
2038         if (hw->mac_type >= e1000_82540) {
2039                 E1000_WRITE_REG(hw, RADV, adapter->rx_abs_int_delay);
2040                 if (adapter->itr_setting != 0)
2041                         E1000_WRITE_REG(hw, ITR,
2042                                 1000000000 / (adapter->itr * 256));
2043         }
2044
2045         if (hw->mac_type >= e1000_82571) {
2046                 ctrl_ext = E1000_READ_REG(hw, CTRL_EXT);
2047                 /* Reset delay timers after every interrupt */
2048                 ctrl_ext |= E1000_CTRL_EXT_INT_TIMER_CLR;
2049 #ifdef CONFIG_E1000_NAPI
2050                 /* Auto-Mask interrupts upon ICR access */
2051                 ctrl_ext |= E1000_CTRL_EXT_IAME;
2052                 E1000_WRITE_REG(hw, IAM, 0xffffffff);
2053 #endif
2054                 E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext);
2055                 E1000_WRITE_FLUSH(hw);
2056         }
2057
2058         /* Setup the HW Rx Head and Tail Descriptor Pointers and
2059          * the Base and Length of the Rx Descriptor Ring */
2060         switch (adapter->num_rx_queues) {
2061         case 1:
2062         default:
2063                 rdba = adapter->rx_ring[0].dma;
2064                 E1000_WRITE_REG(hw, RDLEN, rdlen);
2065                 E1000_WRITE_REG(hw, RDBAH, (rdba >> 32));
2066                 E1000_WRITE_REG(hw, RDBAL, (rdba & 0x00000000ffffffffULL));
2067                 E1000_WRITE_REG(hw, RDT, 0);
2068                 E1000_WRITE_REG(hw, RDH, 0);
2069                 adapter->rx_ring[0].rdh = ((hw->mac_type >= e1000_82543) ? E1000_RDH : E1000_82542_RDH);
2070                 adapter->rx_ring[0].rdt = ((hw->mac_type >= e1000_82543) ? E1000_RDT : E1000_82542_RDT);
2071                 break;
2072         }
2073
2074         /* Enable 82543 Receive Checksum Offload for TCP and UDP */
2075         if (hw->mac_type >= e1000_82543) {
2076                 rxcsum = E1000_READ_REG(hw, RXCSUM);
2077                 if (adapter->rx_csum == TRUE) {
2078                         rxcsum |= E1000_RXCSUM_TUOFL;
2079
2080                         /* Enable 82571 IPv4 payload checksum for UDP fragments
2081                          * Must be used in conjunction with packet-split. */
2082                         if ((hw->mac_type >= e1000_82571) &&
2083                             (adapter->rx_ps_pages)) {
2084                                 rxcsum |= E1000_RXCSUM_IPPCSE;
2085                         }
2086                 } else {
2087                         rxcsum &= ~E1000_RXCSUM_TUOFL;
2088                         /* don't need to clear IPPCSE as it defaults to 0 */
2089                 }
2090                 E1000_WRITE_REG(hw, RXCSUM, rxcsum);
2091         }
2092
2093         /* enable early receives on 82573, only takes effect if using > 2048
2094          * byte total frame size.  for example only for jumbo frames */
2095 #define E1000_ERT_2048 0x100
2096         if (hw->mac_type == e1000_82573)
2097                 E1000_WRITE_REG(hw, ERT, E1000_ERT_2048);
2098
2099         /* Enable Receives */
2100         E1000_WRITE_REG(hw, RCTL, rctl);
2101 }
2102
2103 /**
2104  * e1000_free_tx_resources - Free Tx Resources per Queue
2105  * @adapter: board private structure
2106  * @tx_ring: Tx descriptor ring for a specific queue
2107  *
2108  * Free all transmit software resources
2109  **/
2110
2111 static void
2112 e1000_free_tx_resources(struct e1000_adapter *adapter,
2113                         struct e1000_tx_ring *tx_ring)
2114 {
2115         struct pci_dev *pdev = adapter->pdev;
2116
2117         e1000_clean_tx_ring(adapter, tx_ring);
2118
2119         vfree(tx_ring->buffer_info);
2120         tx_ring->buffer_info = NULL;
2121
2122         pci_free_consistent(pdev, tx_ring->size, tx_ring->desc, tx_ring->dma);
2123
2124         tx_ring->desc = NULL;
2125 }
2126
2127 /**
2128  * e1000_free_all_tx_resources - Free Tx Resources for All Queues
2129  * @adapter: board private structure
2130  *
2131  * Free all transmit software resources
2132  **/
2133
2134 void
2135 e1000_free_all_tx_resources(struct e1000_adapter *adapter)
2136 {
2137         int i;
2138
2139         for (i = 0; i < adapter->num_tx_queues; i++)
2140                 e1000_free_tx_resources(adapter, &adapter->tx_ring[i]);
2141 }
2142
2143 static void
2144 e1000_unmap_and_free_tx_resource(struct e1000_adapter *adapter,
2145                         struct e1000_buffer *buffer_info)
2146 {
2147         if (buffer_info->dma) {
2148                 pci_unmap_page(adapter->pdev,
2149                                 buffer_info->dma,
2150                                 buffer_info->length,
2151                                 PCI_DMA_TODEVICE);
2152                 buffer_info->dma = 0;
2153         }
2154         if (buffer_info->skb) {
2155                 dev_kfree_skb_any(buffer_info->skb);
2156                 buffer_info->skb = NULL;
2157         }
2158         /* buffer_info must be completely set up in the transmit path */
2159 }
2160
2161 /**
2162  * e1000_clean_tx_ring - Free Tx Buffers
2163  * @adapter: board private structure
2164  * @tx_ring: ring to be cleaned
2165  **/
2166
2167 static void
2168 e1000_clean_tx_ring(struct e1000_adapter *adapter,
2169                     struct e1000_tx_ring *tx_ring)
2170 {
2171         struct e1000_buffer *buffer_info;
2172         unsigned long size;
2173         unsigned int i;
2174
2175         /* Free all the Tx ring sk_buffs */
2176
2177         for (i = 0; i < tx_ring->count; i++) {
2178                 buffer_info = &tx_ring->buffer_info[i];
2179                 e1000_unmap_and_free_tx_resource(adapter, buffer_info);
2180         }
2181
2182         size = sizeof(struct e1000_buffer) * tx_ring->count;
2183         memset(tx_ring->buffer_info, 0, size);
2184
2185         /* Zero out the descriptor ring */
2186
2187         memset(tx_ring->desc, 0, tx_ring->size);
2188
2189         tx_ring->next_to_use = 0;
2190         tx_ring->next_to_clean = 0;
2191         tx_ring->last_tx_tso = 0;
2192
2193         writel(0, adapter->hw.hw_addr + tx_ring->tdh);
2194         writel(0, adapter->hw.hw_addr + tx_ring->tdt);
2195 }
2196
2197 /**
2198  * e1000_clean_all_tx_rings - Free Tx Buffers for all queues
2199  * @adapter: board private structure
2200  **/
2201
2202 static void
2203 e1000_clean_all_tx_rings(struct e1000_adapter *adapter)
2204 {
2205         int i;
2206
2207         for (i = 0; i < adapter->num_tx_queues; i++)
2208                 e1000_clean_tx_ring(adapter, &adapter->tx_ring[i]);
2209 }
2210
2211 /**
2212  * e1000_free_rx_resources - Free Rx Resources
2213  * @adapter: board private structure
2214  * @rx_ring: ring to clean the resources from
2215  *
2216  * Free all receive software resources
2217  **/
2218
2219 static void
2220 e1000_free_rx_resources(struct e1000_adapter *adapter,
2221                         struct e1000_rx_ring *rx_ring)
2222 {
2223         struct pci_dev *pdev = adapter->pdev;
2224
2225         e1000_clean_rx_ring(adapter, rx_ring);
2226
2227         vfree(rx_ring->buffer_info);
2228         rx_ring->buffer_info = NULL;
2229         kfree(rx_ring->ps_page);
2230         rx_ring->ps_page = NULL;
2231         kfree(rx_ring->ps_page_dma);
2232         rx_ring->ps_page_dma = NULL;
2233
2234         pci_free_consistent(pdev, rx_ring->size, rx_ring->desc, rx_ring->dma);
2235
2236         rx_ring->desc = NULL;
2237 }
2238
2239 /**
2240  * e1000_free_all_rx_resources - Free Rx Resources for All Queues
2241  * @adapter: board private structure
2242  *
2243  * Free all receive software resources
2244  **/
2245
2246 void
2247 e1000_free_all_rx_resources(struct e1000_adapter *adapter)
2248 {
2249         int i;
2250
2251         for (i = 0; i < adapter->num_rx_queues; i++)
2252                 e1000_free_rx_resources(adapter, &adapter->rx_ring[i]);
2253 }
2254
2255 /**
2256  * e1000_clean_rx_ring - Free Rx Buffers per Queue
2257  * @adapter: board private structure
2258  * @rx_ring: ring to free buffers from
2259  **/
2260
2261 static void
2262 e1000_clean_rx_ring(struct e1000_adapter *adapter,
2263                     struct e1000_rx_ring *rx_ring)
2264 {
2265         struct e1000_buffer *buffer_info;
2266         struct e1000_ps_page *ps_page;
2267         struct e1000_ps_page_dma *ps_page_dma;
2268         struct pci_dev *pdev = adapter->pdev;
2269         unsigned long size;
2270         unsigned int i, j;
2271
2272         /* Free all the Rx ring sk_buffs */
2273         for (i = 0; i < rx_ring->count; i++) {
2274                 buffer_info = &rx_ring->buffer_info[i];
2275                 if (buffer_info->skb) {
2276                         pci_unmap_single(pdev,
2277                                          buffer_info->dma,
2278                                          buffer_info->length,
2279                                          PCI_DMA_FROMDEVICE);
2280
2281                         dev_kfree_skb(buffer_info->skb);
2282                         buffer_info->skb = NULL;
2283                 }
2284                 ps_page = &rx_ring->ps_page[i];
2285                 ps_page_dma = &rx_ring->ps_page_dma[i];
2286                 for (j = 0; j < adapter->rx_ps_pages; j++) {
2287                         if (!ps_page->ps_page[j]) break;
2288                         pci_unmap_page(pdev,
2289                                        ps_page_dma->ps_page_dma[j],
2290                                        PAGE_SIZE, PCI_DMA_FROMDEVICE);
2291                         ps_page_dma->ps_page_dma[j] = 0;
2292                         put_page(ps_page->ps_page[j]);
2293                         ps_page->ps_page[j] = NULL;
2294                 }
2295         }
2296
2297         size = sizeof(struct e1000_buffer) * rx_ring->count;
2298         memset(rx_ring->buffer_info, 0, size);
2299         size = sizeof(struct e1000_ps_page) * rx_ring->count;
2300         memset(rx_ring->ps_page, 0, size);
2301         size = sizeof(struct e1000_ps_page_dma) * rx_ring->count;
2302         memset(rx_ring->ps_page_dma, 0, size);
2303
2304         /* Zero out the descriptor ring */
2305
2306         memset(rx_ring->desc, 0, rx_ring->size);
2307
2308         rx_ring->next_to_clean = 0;
2309         rx_ring->next_to_use = 0;
2310
2311         writel(0, adapter->hw.hw_addr + rx_ring->rdh);
2312         writel(0, adapter->hw.hw_addr + rx_ring->rdt);
2313 }
2314
2315 /**
2316  * e1000_clean_all_rx_rings - Free Rx Buffers for all queues
2317  * @adapter: board private structure
2318  **/
2319
2320 static void
2321 e1000_clean_all_rx_rings(struct e1000_adapter *adapter)
2322 {
2323         int i;
2324
2325         for (i = 0; i < adapter->num_rx_queues; i++)
2326                 e1000_clean_rx_ring(adapter, &adapter->rx_ring[i]);
2327 }
2328
2329 /* The 82542 2.0 (revision 2) needs to have the receive unit in reset
2330  * and memory write and invalidate disabled for certain operations
2331  */
2332 static void
2333 e1000_enter_82542_rst(struct e1000_adapter *adapter)
2334 {
2335         struct net_device *netdev = adapter->netdev;
2336         uint32_t rctl;
2337
2338         e1000_pci_clear_mwi(&adapter->hw);
2339
2340         rctl = E1000_READ_REG(&adapter->hw, RCTL);
2341         rctl |= E1000_RCTL_RST;
2342         E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
2343         E1000_WRITE_FLUSH(&adapter->hw);
2344         mdelay(5);
2345
2346         if (netif_running(netdev))
2347                 e1000_clean_all_rx_rings(adapter);
2348 }
2349
2350 static void
2351 e1000_leave_82542_rst(struct e1000_adapter *adapter)
2352 {
2353         struct net_device *netdev = adapter->netdev;
2354         uint32_t rctl;
2355
2356         rctl = E1000_READ_REG(&adapter->hw, RCTL);
2357         rctl &= ~E1000_RCTL_RST;
2358         E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
2359         E1000_WRITE_FLUSH(&adapter->hw);
2360         mdelay(5);
2361
2362         if (adapter->hw.pci_cmd_word & PCI_COMMAND_INVALIDATE)
2363                 e1000_pci_set_mwi(&adapter->hw);
2364
2365         if (netif_running(netdev)) {
2366                 /* No need to loop, because 82542 supports only 1 queue */
2367                 struct e1000_rx_ring *ring = &adapter->rx_ring[0];
2368                 e1000_configure_rx(adapter);
2369                 adapter->alloc_rx_buf(adapter, ring, E1000_DESC_UNUSED(ring));
2370         }
2371 }
2372
2373 /**
2374  * e1000_set_mac - Change the Ethernet Address of the NIC
2375  * @netdev: network interface device structure
2376  * @p: pointer to an address structure
2377  *
2378  * Returns 0 on success, negative on failure
2379  **/
2380
2381 static int
2382 e1000_set_mac(struct net_device *netdev, void *p)
2383 {
2384         struct e1000_adapter *adapter = netdev_priv(netdev);
2385         struct sockaddr *addr = p;
2386
2387         if (!is_valid_ether_addr(addr->sa_data))
2388                 return -EADDRNOTAVAIL;
2389
2390         /* 82542 2.0 needs to be in reset to write receive address registers */
2391
2392         if (adapter->hw.mac_type == e1000_82542_rev2_0)
2393                 e1000_enter_82542_rst(adapter);
2394
2395         memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
2396         memcpy(adapter->hw.mac_addr, addr->sa_data, netdev->addr_len);
2397
2398         e1000_rar_set(&adapter->hw, adapter->hw.mac_addr, 0);
2399
2400         /* With 82571 controllers, LAA may be overwritten (with the default)
2401          * due to controller reset from the other port. */
2402         if (adapter->hw.mac_type == e1000_82571) {
2403                 /* activate the work around */
2404                 adapter->hw.laa_is_present = 1;
2405
2406                 /* Hold a copy of the LAA in RAR[14] This is done so that
2407                  * between the time RAR[0] gets clobbered  and the time it
2408                  * gets fixed (in e1000_watchdog), the actual LAA is in one
2409                  * of the RARs and no incoming packets directed to this port
2410                  * are dropped. Eventaully the LAA will be in RAR[0] and
2411                  * RAR[14] */
2412                 e1000_rar_set(&adapter->hw, adapter->hw.mac_addr,
2413                                         E1000_RAR_ENTRIES - 1);
2414         }
2415
2416         if (adapter->hw.mac_type == e1000_82542_rev2_0)
2417                 e1000_leave_82542_rst(adapter);
2418
2419         return 0;
2420 }
2421
2422 /**
2423  * e1000_set_multi - Multicast and Promiscuous mode set
2424  * @netdev: network interface device structure
2425  *
2426  * The set_multi entry point is called whenever the multicast address
2427  * list or the network interface flags are updated.  This routine is
2428  * responsible for configuring the hardware for proper multicast,
2429  * promiscuous mode, and all-multi behavior.
2430  **/
2431
2432 static void
2433 e1000_set_multi(struct net_device *netdev)
2434 {
2435         struct e1000_adapter *adapter = netdev_priv(netdev);
2436         struct e1000_hw *hw = &adapter->hw;
2437         struct dev_mc_list *mc_ptr;
2438         uint32_t rctl;
2439         uint32_t hash_value;
2440         int i, rar_entries = E1000_RAR_ENTRIES;
2441         int mta_reg_count = (hw->mac_type == e1000_ich8lan) ?
2442                                 E1000_NUM_MTA_REGISTERS_ICH8LAN :
2443                                 E1000_NUM_MTA_REGISTERS;
2444
2445         if (adapter->hw.mac_type == e1000_ich8lan)
2446                 rar_entries = E1000_RAR_ENTRIES_ICH8LAN;
2447
2448         /* reserve RAR[14] for LAA over-write work-around */
2449         if (adapter->hw.mac_type == e1000_82571)
2450                 rar_entries--;
2451
2452         /* Check for Promiscuous and All Multicast modes */
2453
2454         rctl = E1000_READ_REG(hw, RCTL);
2455
2456         if (netdev->flags & IFF_PROMISC) {
2457                 rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE);
2458         } else if (netdev->flags & IFF_ALLMULTI) {
2459                 rctl |= E1000_RCTL_MPE;
2460                 rctl &= ~E1000_RCTL_UPE;
2461         } else {
2462                 rctl &= ~(E1000_RCTL_UPE | E1000_RCTL_MPE);
2463         }
2464
2465         E1000_WRITE_REG(hw, RCTL, rctl);
2466
2467         /* 82542 2.0 needs to be in reset to write receive address registers */
2468
2469         if (hw->mac_type == e1000_82542_rev2_0)
2470                 e1000_enter_82542_rst(adapter);
2471
2472         /* load the first 14 multicast address into the exact filters 1-14
2473          * RAR 0 is used for the station MAC adddress
2474          * if there are not 14 addresses, go ahead and clear the filters
2475          * -- with 82571 controllers only 0-13 entries are filled here
2476          */
2477         mc_ptr = netdev->mc_list;
2478
2479         for (i = 1; i < rar_entries; i++) {
2480                 if (mc_ptr) {
2481                         e1000_rar_set(hw, mc_ptr->dmi_addr, i);
2482                         mc_ptr = mc_ptr->next;
2483                 } else {
2484                         E1000_WRITE_REG_ARRAY(hw, RA, i << 1, 0);
2485                         E1000_WRITE_FLUSH(hw);
2486                         E1000_WRITE_REG_ARRAY(hw, RA, (i << 1) + 1, 0);
2487                         E1000_WRITE_FLUSH(hw);
2488                 }
2489         }
2490
2491         /* clear the old settings from the multicast hash table */
2492
2493         for (i = 0; i < mta_reg_count; i++) {
2494                 E1000_WRITE_REG_ARRAY(hw, MTA, i, 0);
2495                 E1000_WRITE_FLUSH(hw);
2496         }
2497
2498         /* load any remaining addresses into the hash table */
2499
2500         for (; mc_ptr; mc_ptr = mc_ptr->next) {
2501                 hash_value = e1000_hash_mc_addr(hw, mc_ptr->dmi_addr);
2502                 e1000_mta_set(hw, hash_value);
2503         }
2504
2505         if (hw->mac_type == e1000_82542_rev2_0)
2506                 e1000_leave_82542_rst(adapter);
2507 }
2508
2509 /* Need to wait a few seconds after link up to get diagnostic information from
2510  * the phy */
2511
2512 static void
2513 e1000_update_phy_info(unsigned long data)
2514 {
2515         struct e1000_adapter *adapter = (struct e1000_adapter *) data;
2516         e1000_phy_get_info(&adapter->hw, &adapter->phy_info);
2517 }
2518
2519 /**
2520  * e1000_82547_tx_fifo_stall - Timer Call-back
2521  * @data: pointer to adapter cast into an unsigned long
2522  **/
2523
2524 static void
2525 e1000_82547_tx_fifo_stall(unsigned long data)
2526 {
2527         struct e1000_adapter *adapter = (struct e1000_adapter *) data;
2528         struct net_device *netdev = adapter->netdev;
2529         uint32_t tctl;
2530
2531         if (atomic_read(&adapter->tx_fifo_stall)) {
2532                 if ((E1000_READ_REG(&adapter->hw, TDT) ==
2533                     E1000_READ_REG(&adapter->hw, TDH)) &&
2534                    (E1000_READ_REG(&adapter->hw, TDFT) ==
2535                     E1000_READ_REG(&adapter->hw, TDFH)) &&
2536                    (E1000_READ_REG(&adapter->hw, TDFTS) ==
2537                     E1000_READ_REG(&adapter->hw, TDFHS))) {
2538                         tctl = E1000_READ_REG(&adapter->hw, TCTL);
2539                         E1000_WRITE_REG(&adapter->hw, TCTL,
2540                                         tctl & ~E1000_TCTL_EN);
2541                         E1000_WRITE_REG(&adapter->hw, TDFT,
2542                                         adapter->tx_head_addr);
2543                         E1000_WRITE_REG(&adapter->hw, TDFH,
2544                                         adapter->tx_head_addr);
2545                         E1000_WRITE_REG(&adapter->hw, TDFTS,
2546                                         adapter->tx_head_addr);
2547                         E1000_WRITE_REG(&adapter->hw, TDFHS,
2548                                         adapter->tx_head_addr);
2549                         E1000_WRITE_REG(&adapter->hw, TCTL, tctl);
2550                         E1000_WRITE_FLUSH(&adapter->hw);
2551
2552                         adapter->tx_fifo_head = 0;
2553                         atomic_set(&adapter->tx_fifo_stall, 0);
2554                         netif_wake_queue(netdev);
2555                 } else {
2556                         mod_timer(&adapter->tx_fifo_stall_timer, jiffies + 1);
2557                 }
2558         }
2559 }
2560
2561 /**
2562  * e1000_watchdog - Timer Call-back
2563  * @data: pointer to adapter cast into an unsigned long
2564  **/
2565 static void
2566 e1000_watchdog(unsigned long data)
2567 {
2568         struct e1000_adapter *adapter = (struct e1000_adapter *) data;
2569         struct net_device *netdev = adapter->netdev;
2570         struct e1000_tx_ring *txdr = adapter->tx_ring;
2571         uint32_t link, tctl;
2572         int32_t ret_val;
2573
2574         ret_val = e1000_check_for_link(&adapter->hw);
2575         if ((ret_val == E1000_ERR_PHY) &&
2576             (adapter->hw.phy_type == e1000_phy_igp_3) &&
2577             (E1000_READ_REG(&adapter->hw, CTRL) & E1000_PHY_CTRL_GBE_DISABLE)) {
2578                 /* See e1000_kumeran_lock_loss_workaround() */
2579                 DPRINTK(LINK, INFO,
2580                         "Gigabit has been disabled, downgrading speed\n");
2581         }
2582
2583         if (adapter->hw.mac_type == e1000_82573) {
2584                 e1000_enable_tx_pkt_filtering(&adapter->hw);
2585                 if (adapter->mng_vlan_id != adapter->hw.mng_cookie.vlan_id)
2586                         e1000_update_mng_vlan(adapter);
2587         }
2588
2589         if ((adapter->hw.media_type == e1000_media_type_internal_serdes) &&
2590            !(E1000_READ_REG(&adapter->hw, TXCW) & E1000_TXCW_ANE))
2591                 link = !adapter->hw.serdes_link_down;
2592         else
2593                 link = E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_LU;
2594
2595         if (link) {
2596                 if (!netif_carrier_ok(netdev)) {
2597                         uint32_t ctrl;
2598                         boolean_t txb2b = 1;
2599                         e1000_get_speed_and_duplex(&adapter->hw,
2600                                                    &adapter->link_speed,
2601                                                    &adapter->link_duplex);
2602
2603                         ctrl = E1000_READ_REG(&adapter->hw, CTRL);
2604                         DPRINTK(LINK, INFO, "NIC Link is Up %d Mbps %s, "
2605                                 "Flow Control: %s\n",
2606                                 adapter->link_speed,
2607                                 adapter->link_duplex == FULL_DUPLEX ?
2608                                 "Full Duplex" : "Half Duplex",
2609                                 ((ctrl & E1000_CTRL_TFCE) && (ctrl &
2610                                 E1000_CTRL_RFCE)) ? "RX/TX" : ((ctrl &
2611                                 E1000_CTRL_RFCE) ? "RX" : ((ctrl &
2612                                 E1000_CTRL_TFCE) ? "TX" : "None" )));
2613
2614                         /* tweak tx_queue_len according to speed/duplex
2615                          * and adjust the timeout factor */
2616                         netdev->tx_queue_len = adapter->tx_queue_len;
2617                         adapter->tx_timeout_factor = 1;
2618                         switch (adapter->link_speed) {
2619                         case SPEED_10:
2620                                 txb2b = 0;
2621                                 netdev->tx_queue_len = 10;
2622                                 adapter->tx_timeout_factor = 8;
2623                                 break;
2624                         case SPEED_100:
2625                                 txb2b = 0;
2626                                 netdev->tx_queue_len = 100;
2627                                 /* maybe add some timeout factor ? */
2628                                 break;
2629                         }
2630
2631                         if ((adapter->hw.mac_type == e1000_82571 ||
2632                              adapter->hw.mac_type == e1000_82572) &&
2633                             txb2b == 0) {
2634                                 uint32_t tarc0;
2635                                 tarc0 = E1000_READ_REG(&adapter->hw, TARC0);
2636                                 tarc0 &= ~(1 << 21);
2637                                 E1000_WRITE_REG(&adapter->hw, TARC0, tarc0);
2638                         }
2639
2640                         /* disable TSO for pcie and 10/100 speeds, to avoid
2641                          * some hardware issues */
2642                         if (!adapter->tso_force &&
2643                             adapter->hw.bus_type == e1000_bus_type_pci_express){
2644                                 switch (adapter->link_speed) {
2645                                 case SPEED_10:
2646                                 case SPEED_100:
2647                                         DPRINTK(PROBE,INFO,
2648                                         "10/100 speed: disabling TSO\n");
2649                                         netdev->features &= ~NETIF_F_TSO;
2650                                         netdev->features &= ~NETIF_F_TSO6;
2651                                         break;
2652                                 case SPEED_1000:
2653                                         netdev->features |= NETIF_F_TSO;
2654                                         netdev->features |= NETIF_F_TSO6;
2655                                         break;
2656                                 default:
2657                                         /* oops */
2658                                         break;
2659                                 }
2660                         }
2661
2662                         /* enable transmits in the hardware, need to do this
2663                          * after setting TARC0 */
2664                         tctl = E1000_READ_REG(&adapter->hw, TCTL);
2665                         tctl |= E1000_TCTL_EN;
2666                         E1000_WRITE_REG(&adapter->hw, TCTL, tctl);
2667
2668                         netif_carrier_on(netdev);
2669                         netif_wake_queue(netdev);
2670                         mod_timer(&adapter->phy_info_timer, jiffies + 2 * HZ);
2671                         adapter->smartspeed = 0;
2672                 } else {
2673                         /* make sure the receive unit is started */
2674                         if (adapter->hw.rx_needs_kicking) {
2675                                 struct e1000_hw *hw = &adapter->hw;
2676                                 uint32_t rctl = E1000_READ_REG(hw, RCTL);
2677                                 E1000_WRITE_REG(hw, RCTL, rctl | E1000_RCTL_EN);
2678                         }
2679                 }
2680         } else {
2681                 if (netif_carrier_ok(netdev)) {
2682                         adapter->link_speed = 0;
2683                         adapter->link_duplex = 0;
2684                         DPRINTK(LINK, INFO, "NIC Link is Down\n");
2685                         netif_carrier_off(netdev);
2686                         netif_stop_queue(netdev);
2687                         mod_timer(&adapter->phy_info_timer, jiffies + 2 * HZ);
2688
2689                         /* 80003ES2LAN workaround--
2690                          * For packet buffer work-around on link down event;
2691                          * disable receives in the ISR and
2692                          * reset device here in the watchdog
2693                          */
2694                         if (adapter->hw.mac_type == e1000_80003es2lan)
2695                                 /* reset device */
2696                                 schedule_work(&adapter->reset_task);
2697                 }
2698
2699                 e1000_smartspeed(adapter);
2700         }
2701
2702         e1000_update_stats(adapter);
2703
2704         adapter->hw.tx_packet_delta = adapter->stats.tpt - adapter->tpt_old;
2705         adapter->tpt_old = adapter->stats.tpt;
2706         adapter->hw.collision_delta = adapter->stats.colc - adapter->colc_old;
2707         adapter->colc_old = adapter->stats.colc;
2708
2709         adapter->gorcl = adapter->stats.gorcl - adapter->gorcl_old;
2710         adapter->gorcl_old = adapter->stats.gorcl;
2711         adapter->gotcl = adapter->stats.gotcl - adapter->gotcl_old;
2712         adapter->gotcl_old = adapter->stats.gotcl;
2713
2714         e1000_update_adaptive(&adapter->hw);
2715
2716         if (!netif_carrier_ok(netdev)) {
2717                 if (E1000_DESC_UNUSED(txdr) + 1 < txdr->count) {
2718                         /* We've lost link, so the controller stops DMA,
2719                          * but we've got queued Tx work that's never going
2720                          * to get done, so reset controller to flush Tx.
2721                          * (Do the reset outside of interrupt context). */
2722                         adapter->tx_timeout_count++;
2723                         schedule_work(&adapter->reset_task);
2724                 }
2725         }
2726
2727         /* Cause software interrupt to ensure rx ring is cleaned */
2728         E1000_WRITE_REG(&adapter->hw, ICS, E1000_ICS_RXDMT0);
2729
2730         /* Force detection of hung controller every watchdog period */
2731         adapter->detect_tx_hung = TRUE;
2732
2733         /* With 82571 controllers, LAA may be overwritten due to controller
2734          * reset from the other port. Set the appropriate LAA in RAR[0] */
2735         if (adapter->hw.mac_type == e1000_82571 && adapter->hw.laa_is_present)
2736                 e1000_rar_set(&adapter->hw, adapter->hw.mac_addr, 0);
2737
2738         /* Reset the timer */
2739         mod_timer(&adapter->watchdog_timer, jiffies + 2 * HZ);
2740 }
2741
2742 enum latency_range {
2743         lowest_latency = 0,
2744         low_latency = 1,
2745         bulk_latency = 2,
2746         latency_invalid = 255
2747 };
2748
2749 /**
2750  * e1000_update_itr - update the dynamic ITR value based on statistics
2751  *      Stores a new ITR value based on packets and byte
2752  *      counts during the last interrupt.  The advantage of per interrupt
2753  *      computation is faster updates and more accurate ITR for the current
2754  *      traffic pattern.  Constants in this function were computed
2755  *      based on theoretical maximum wire speed and thresholds were set based
2756  *      on testing data as well as attempting to minimize response time
2757  *      while increasing bulk throughput.
2758  *      this functionality is controlled by the InterruptThrottleRate module
2759  *      parameter (see e1000_param.c)
2760  * @adapter: pointer to adapter
2761  * @itr_setting: current adapter->itr
2762  * @packets: the number of packets during this measurement interval
2763  * @bytes: the number of bytes during this measurement interval
2764  **/
2765 static unsigned int e1000_update_itr(struct e1000_adapter *adapter,
2766                                    uint16_t itr_setting,
2767                                    int packets,
2768                                    int bytes)
2769 {
2770         unsigned int retval = itr_setting;
2771         struct e1000_hw *hw = &adapter->hw;
2772
2773         if (unlikely(hw->mac_type < e1000_82540))
2774                 goto update_itr_done;
2775
2776         if (packets == 0)
2777                 goto update_itr_done;
2778
2779         switch (itr_setting) {
2780         case lowest_latency:
2781                 /* jumbo frames get bulk treatment*/
2782                 if (bytes/packets > 8000)
2783                         retval = bulk_latency;
2784                 else if ((packets < 5) && (bytes > 512))
2785                         retval = low_latency;
2786                 break;
2787         case low_latency:  /* 50 usec aka 20000 ints/s */
2788                 if (bytes > 10000) {
2789                         /* jumbo frames need bulk latency setting */
2790                         if (bytes/packets > 8000)
2791                                 retval = bulk_latency;
2792                         else if ((packets < 10) || ((bytes/packets) > 1200))
2793                                 retval = bulk_latency;
2794                         else if ((packets > 35))
2795                                 retval = lowest_latency;
2796                 } else if (bytes/packets > 2000)
2797                         retval = bulk_latency;
2798                 else if (packets <= 2 && bytes < 512)
2799                         retval = lowest_latency;
2800                 break;
2801         case bulk_latency: /* 250 usec aka 4000 ints/s */
2802                 if (bytes > 25000) {
2803                         if (packets > 35)
2804                                 retval = low_latency;
2805                 } else if (bytes < 6000) {
2806                         retval = low_latency;
2807                 }
2808                 break;
2809         }
2810
2811 update_itr_done:
2812         return retval;
2813 }
2814
2815 static void e1000_set_itr(struct e1000_adapter *adapter)
2816 {
2817         struct e1000_hw *hw = &adapter->hw;
2818         uint16_t current_itr;
2819         uint32_t new_itr = adapter->itr;
2820
2821         if (unlikely(hw->mac_type < e1000_82540))
2822                 return;
2823
2824         /* for non-gigabit speeds, just fix the interrupt rate at 4000 */
2825         if (unlikely(adapter->link_speed != SPEED_1000)) {
2826                 current_itr = 0;
2827                 new_itr = 4000;
2828                 goto set_itr_now;
2829         }
2830
2831         adapter->tx_itr = e1000_update_itr(adapter,
2832                                     adapter->tx_itr,
2833                                     adapter->total_tx_packets,
2834                                     adapter->total_tx_bytes);
2835         /* conservative mode (itr 3) eliminates the lowest_latency setting */
2836         if (adapter->itr_setting == 3 && adapter->tx_itr == lowest_latency)
2837                 adapter->tx_itr = low_latency;
2838
2839         adapter->rx_itr = e1000_update_itr(adapter,
2840                                     adapter->rx_itr,
2841                                     adapter->total_rx_packets,
2842                                     adapter->total_rx_bytes);
2843         /* conservative mode (itr 3) eliminates the lowest_latency setting */
2844         if (adapter->itr_setting == 3 && adapter->rx_itr == lowest_latency)
2845                 adapter->rx_itr = low_latency;
2846
2847         current_itr = max(adapter->rx_itr, adapter->tx_itr);
2848
2849         switch (current_itr) {
2850         /* counts and packets in update_itr are dependent on these numbers */
2851         case lowest_latency:
2852                 new_itr = 70000;
2853                 break;
2854         case low_latency:
2855                 new_itr = 20000; /* aka hwitr = ~200 */
2856                 break;
2857         case bulk_latency:
2858                 new_itr = 4000;
2859                 break;
2860         default:
2861                 break;
2862         }
2863
2864 set_itr_now:
2865         if (new_itr != adapter->itr) {
2866                 /* this attempts to bias the interrupt rate towards Bulk
2867                  * by adding intermediate steps when interrupt rate is
2868                  * increasing */
2869                 new_itr = new_itr > adapter->itr ?
2870                              min(adapter->itr + (new_itr >> 2), new_itr) :
2871                              new_itr;
2872                 adapter->itr = new_itr;
2873                 E1000_WRITE_REG(hw, ITR, 1000000000 / (new_itr * 256));
2874         }
2875
2876         return;
2877 }
2878
2879 #define E1000_TX_FLAGS_CSUM             0x00000001
2880 #define E1000_TX_FLAGS_VLAN             0x00000002
2881 #define E1000_TX_FLAGS_TSO              0x00000004
2882 #define E1000_TX_FLAGS_IPV4             0x00000008
2883 #define E1000_TX_FLAGS_VLAN_MASK        0xffff0000
2884 #define E1000_TX_FLAGS_VLAN_SHIFT       16
2885
2886 static int
2887 e1000_tso(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring,
2888           struct sk_buff *skb)
2889 {
2890         struct e1000_context_desc *context_desc;
2891         struct e1000_buffer *buffer_info;
2892         unsigned int i;
2893         uint32_t cmd_length = 0;
2894         uint16_t ipcse = 0, tucse, mss;
2895         uint8_t ipcss, ipcso, tucss, tucso, hdr_len;
2896         int err;
2897
2898         if (skb_is_gso(skb)) {
2899                 if (skb_header_cloned(skb)) {
2900                         err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
2901                         if (err)
2902                                 return err;
2903                 }
2904
2905                 hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
2906                 mss = skb_shinfo(skb)->gso_size;
2907                 if (skb->protocol == htons(ETH_P_IP)) {
2908                         struct iphdr *iph = ip_hdr(skb);
2909                         iph->tot_len = 0;
2910                         iph->check = 0;
2911                         tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr,
2912                                                                  iph->daddr, 0,
2913                                                                  IPPROTO_TCP,
2914                                                                  0);
2915                         cmd_length = E1000_TXD_CMD_IP;
2916                         ipcse = skb_transport_offset(skb) - 1;
2917                 } else if (skb->protocol == htons(ETH_P_IPV6)) {
2918                         ipv6_hdr(skb)->payload_len = 0;
2919                         tcp_hdr(skb)->check =
2920                                 ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
2921                                                  &ipv6_hdr(skb)->daddr,
2922                                                  0, IPPROTO_TCP, 0);
2923                         ipcse = 0;
2924                 }
2925                 ipcss = skb_network_offset(skb);
2926                 ipcso = (void *)&(ip_hdr(skb)->check) - (void *)skb->data;
2927                 tucss = skb_transport_offset(skb);
2928                 tucso = (void *)&(tcp_hdr(skb)->check) - (void *)skb->data;
2929                 tucse = 0;
2930
2931                 cmd_length |= (E1000_TXD_CMD_DEXT | E1000_TXD_CMD_TSE |
2932                                E1000_TXD_CMD_TCP | (skb->len - (hdr_len)));
2933
2934                 i = tx_ring->next_to_use;
2935                 context_desc = E1000_CONTEXT_DESC(*tx_ring, i);
2936                 buffer_info = &tx_ring->buffer_info[i];
2937
2938                 context_desc->lower_setup.ip_fields.ipcss  = ipcss;
2939                 context_desc->lower_setup.ip_fields.ipcso  = ipcso;
2940                 context_desc->lower_setup.ip_fields.ipcse  = cpu_to_le16(ipcse);
2941                 context_desc->upper_setup.tcp_fields.tucss = tucss;
2942                 context_desc->upper_setup.tcp_fields.tucso = tucso;
2943                 context_desc->upper_setup.tcp_fields.tucse = cpu_to_le16(tucse);
2944                 context_desc->tcp_seg_setup.fields.mss     = cpu_to_le16(mss);
2945                 context_desc->tcp_seg_setup.fields.hdr_len = hdr_len;
2946                 context_desc->cmd_and_length = cpu_to_le32(cmd_length);
2947
2948                 buffer_info->time_stamp = jiffies;
2949                 buffer_info->next_to_watch = i;
2950
2951                 if (++i == tx_ring->count) i = 0;
2952                 tx_ring->next_to_use = i;
2953
2954                 return TRUE;
2955         }
2956         return FALSE;
2957 }
2958
2959 static boolean_t
2960 e1000_tx_csum(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring,
2961               struct sk_buff *skb)
2962 {
2963         struct e1000_context_desc *context_desc;
2964         struct e1000_buffer *buffer_info;
2965         unsigned int i;
2966         uint8_t css;
2967
2968         if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) {
2969                 css = skb_transport_offset(skb);
2970
2971                 i = tx_ring->next_to_use;
2972                 buffer_info = &tx_ring->buffer_info[i];
2973                 context_desc = E1000_CONTEXT_DESC(*tx_ring, i);
2974
2975                 context_desc->lower_setup.ip_config = 0;
2976                 context_desc->upper_setup.tcp_fields.tucss = css;
2977                 context_desc->upper_setup.tcp_fields.tucso =
2978                         css + skb->csum_offset;
2979                 context_desc->upper_setup.tcp_fields.tucse = 0;
2980                 context_desc->tcp_seg_setup.data = 0;
2981                 context_desc->cmd_and_length = cpu_to_le32(E1000_TXD_CMD_DEXT);
2982
2983                 buffer_info->time_stamp = jiffies;
2984                 buffer_info->next_to_watch = i;
2985
2986                 if (unlikely(++i == tx_ring->count)) i = 0;
2987                 tx_ring->next_to_use = i;
2988
2989                 return TRUE;
2990         }
2991
2992         return FALSE;
2993 }
2994
2995 #define E1000_MAX_TXD_PWR       12
2996 #define E1000_MAX_DATA_PER_TXD  (1<<E1000_MAX_TXD_PWR)
2997
2998 static int
2999 e1000_tx_map(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring,
3000              struct sk_buff *skb, unsigned int first, unsigned int max_per_txd,
3001              unsigned int nr_frags, unsigned int mss)
3002 {
3003         struct e1000_buffer *buffer_info;
3004         unsigned int len = skb->len;
3005         unsigned int offset = 0, size, count = 0, i;
3006         unsigned int f;
3007         len -= skb->data_len;
3008
3009         i = tx_ring->next_to_use;
3010
3011         while (len) {
3012                 buffer_info = &tx_ring->buffer_info[i];
3013                 size = min(len, max_per_txd);
3014                 /* Workaround for Controller erratum --
3015                  * descriptor for non-tso packet in a linear SKB that follows a
3016                  * tso gets written back prematurely before the data is fully
3017                  * DMA'd to the controller */
3018                 if (!skb->data_len && tx_ring->last_tx_tso &&
3019                     !skb_is_gso(skb)) {
3020                         tx_ring->last_tx_tso = 0;
3021                         size -= 4;
3022                 }
3023
3024                 /* Workaround for premature desc write-backs
3025                  * in TSO mode.  Append 4-byte sentinel desc */
3026                 if (unlikely(mss && !nr_frags && size == len && size > 8))
3027                         size -= 4;
3028                 /* work-around for errata 10 and it applies
3029                  * to all controllers in PCI-X mode
3030                  * The fix is to make sure that the first descriptor of a
3031                  * packet is smaller than 2048 - 16 - 16 (or 2016) bytes
3032                  */
3033                 if (unlikely((adapter->hw.bus_type == e1000_bus_type_pcix) &&
3034                                 (size > 2015) && count == 0))
3035                         size = 2015;
3036
3037                 /* Workaround for potential 82544 hang in PCI-X.  Avoid
3038                  * terminating buffers within evenly-aligned dwords. */
3039                 if (unlikely(adapter->pcix_82544 &&
3040                    !((unsigned long)(skb->data + offset + size - 1) & 4) &&
3041                    size > 4))
3042                         size -= 4;
3043
3044                 buffer_info->length = size;
3045                 buffer_info->dma =
3046                         pci_map_single(adapter->pdev,
3047                                 skb->data + offset,
3048                                 size,
3049                                 PCI_DMA_TODEVICE);
3050                 buffer_info->time_stamp = jiffies;
3051                 buffer_info->next_to_watch = i;
3052
3053                 len -= size;
3054                 offset += size;
3055                 count++;
3056                 if (unlikely(++i == tx_ring->count)) i = 0;
3057         }
3058
3059         for (f = 0; f < nr_frags; f++) {
3060                 struct skb_frag_struct *frag;
3061
3062                 frag = &skb_shinfo(skb)->frags[f];
3063                 len = frag->size;
3064                 offset = frag->page_offset;
3065
3066                 while (len) {
3067                         buffer_info = &tx_ring->buffer_info[i];
3068                         size = min(len, max_per_txd);
3069                         /* Workaround for premature desc write-backs
3070                          * in TSO mode.  Append 4-byte sentinel desc */
3071                         if (unlikely(mss && f == (nr_frags-1) && size == len && size > 8))
3072                                 size -= 4;
3073                         /* Workaround for potential 82544 hang in PCI-X.
3074                          * Avoid terminating buffers within evenly-aligned
3075                          * dwords. */
3076                         if (unlikely(adapter->pcix_82544 &&
3077                            !((unsigned long)(frag->page+offset+size-1) & 4) &&
3078                            size > 4))
3079                                 size -= 4;
3080
3081                         buffer_info->length = size;
3082                         buffer_info->dma =
3083                                 pci_map_page(adapter->pdev,
3084                                         frag->page,
3085                                         offset,
3086                                         size,
3087                                         PCI_DMA_TODEVICE);
3088                         buffer_info->time_stamp = jiffies;
3089                         buffer_info->next_to_watch = i;
3090
3091                         len -= size;
3092                         offset += size;
3093                         count++;
3094                         if (unlikely(++i == tx_ring->count)) i = 0;
3095                 }
3096         }
3097
3098         i = (i == 0) ? tx_ring->count - 1 : i - 1;
3099         tx_ring->buffer_info[i].skb = skb;
3100         tx_ring->buffer_info[first].next_to_watch = i;
3101
3102         return count;
3103 }
3104
3105 static void
3106 e1000_tx_queue(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring,
3107                int tx_flags, int count)
3108 {
3109         struct e1000_tx_desc *tx_desc = NULL;
3110         struct e1000_buffer *buffer_info;
3111         uint32_t txd_upper = 0, txd_lower = E1000_TXD_CMD_IFCS;
3112         unsigned int i;
3113
3114         if (likely(tx_flags & E1000_TX_FLAGS_TSO)) {
3115                 txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D |
3116                              E1000_TXD_CMD_TSE;
3117                 txd_upper |= E1000_TXD_POPTS_TXSM << 8;
3118
3119                 if (likely(tx_flags & E1000_TX_FLAGS_IPV4))
3120                         txd_upper |= E1000_TXD_POPTS_IXSM << 8;
3121         }
3122
3123         if (likely(tx_flags & E1000_TX_FLAGS_CSUM)) {
3124                 txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D;
3125                 txd_upper |= E1000_TXD_POPTS_TXSM << 8;
3126         }
3127
3128         if (unlikely(tx_flags & E1000_TX_FLAGS_VLAN)) {
3129                 txd_lower |= E1000_TXD_CMD_VLE;
3130                 txd_upper |= (tx_flags & E1000_TX_FLAGS_VLAN_MASK);
3131         }
3132
3133         i = tx_ring->next_to_use;
3134
3135         while (count--) {
3136                 buffer_info = &tx_ring->buffer_info[i];
3137                 tx_desc = E1000_TX_DESC(*tx_ring, i);
3138                 tx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
3139                 tx_desc->lower.data =
3140                         cpu_to_le32(txd_lower | buffer_info->length);
3141                 tx_desc->upper.data = cpu_to_le32(txd_upper);
3142                 if (unlikely(++i == tx_ring->count)) i = 0;
3143         }
3144
3145         tx_desc->lower.data |= cpu_to_le32(adapter->txd_cmd);
3146
3147         /* Force memory writes to complete before letting h/w
3148          * know there are new descriptors to fetch.  (Only
3149          * applicable for weak-ordered memory model archs,
3150          * such as IA-64). */
3151         wmb();
3152
3153         tx_ring->next_to_use = i;
3154         writel(i, adapter->hw.hw_addr + tx_ring->tdt);
3155         /* we need this if more than one processor can write to our tail
3156          * at a time, it syncronizes IO on IA64/Altix systems */
3157         mmiowb();
3158 }
3159
3160 /**
3161  * 82547 workaround to avoid controller hang in half-duplex environment.
3162  * The workaround is to avoid queuing a large packet that would span
3163  * the internal Tx FIFO ring boundary by notifying the stack to resend
3164  * the packet at a later time.  This gives the Tx FIFO an opportunity to
3165  * flush all packets.  When that occurs, we reset the Tx FIFO pointers
3166  * to the beginning of the Tx FIFO.
3167  **/
3168
3169 #define E1000_FIFO_HDR                  0x10
3170 #define E1000_82547_PAD_LEN             0x3E0
3171
3172 static int
3173 e1000_82547_fifo_workaround(struct e1000_adapter *adapter, struct sk_buff *skb)
3174 {
3175         uint32_t fifo_space = adapter->tx_fifo_size - adapter->tx_fifo_head;
3176         uint32_t skb_fifo_len = skb->len + E1000_FIFO_HDR;
3177
3178         E1000_ROUNDUP(skb_fifo_len, E1000_FIFO_HDR);
3179
3180         if (adapter->link_duplex != HALF_DUPLEX)
3181                 goto no_fifo_stall_required;
3182
3183         if (atomic_read(&adapter->tx_fifo_stall))
3184                 return 1;
3185
3186         if (skb_fifo_len >= (E1000_82547_PAD_LEN + fifo_space)) {
3187                 atomic_set(&adapter->tx_fifo_stall, 1);
3188                 return 1;
3189         }
3190
3191 no_fifo_stall_required:
3192         adapter->tx_fifo_head += skb_fifo_len;
3193         if (adapter->tx_fifo_head >= adapter->tx_fifo_size)
3194                 adapter->tx_fifo_head -= adapter->tx_fifo_size;
3195         return 0;
3196 }
3197
3198 #define MINIMUM_DHCP_PACKET_SIZE 282
3199 static int
3200 e1000_transfer_dhcp_info(struct e1000_adapter *adapter, struct sk_buff *skb)
3201 {
3202         struct e1000_hw *hw =  &adapter->hw;
3203         uint16_t length, offset;
3204         if (vlan_tx_tag_present(skb)) {
3205                 if (!((vlan_tx_tag_get(skb) == adapter->hw.mng_cookie.vlan_id) &&
3206                         ( adapter->hw.mng_cookie.status &
3207                           E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT)) )
3208                         return 0;
3209         }
3210         if (skb->len > MINIMUM_DHCP_PACKET_SIZE) {
3211                 struct ethhdr *eth = (struct ethhdr *) skb->data;
3212                 if ((htons(ETH_P_IP) == eth->h_proto)) {
3213                         const struct iphdr *ip =
3214                                 (struct iphdr *)((uint8_t *)skb->data+14);
3215                         if (IPPROTO_UDP == ip->protocol) {
3216                                 struct udphdr *udp =
3217                                         (struct udphdr *)((uint8_t *)ip +
3218                                                 (ip->ihl << 2));
3219                                 if (ntohs(udp->dest) == 67) {
3220                                         offset = (uint8_t *)udp + 8 - skb->data;
3221                                         length = skb->len - offset;
3222
3223                                         return e1000_mng_write_dhcp_info(hw,
3224                                                         (uint8_t *)udp + 8,
3225                                                         length);
3226                                 }
3227                         }
3228                 }
3229         }
3230         return 0;
3231 }
3232
3233 static int __e1000_maybe_stop_tx(struct net_device *netdev, int size)
3234 {
3235         struct e1000_adapter *adapter = netdev_priv(netdev);
3236         struct e1000_tx_ring *tx_ring = adapter->tx_ring;
3237
3238         netif_stop_queue(netdev);
3239         /* Herbert's original patch had:
3240          *  smp_mb__after_netif_stop_queue();
3241          * but since that doesn't exist yet, just open code it. */
3242         smp_mb();
3243
3244         /* We need to check again in a case another CPU has just
3245          * made room available. */
3246         if (likely(E1000_DESC_UNUSED(tx_ring) < size))
3247                 return -EBUSY;
3248
3249         /* A reprieve! */
3250         netif_start_queue(netdev);
3251         ++adapter->restart_queue;
3252         return 0;
3253 }
3254
3255 static int e1000_maybe_stop_tx(struct net_device *netdev,
3256                                struct e1000_tx_ring *tx_ring, int size)
3257 {
3258         if (likely(E1000_DESC_UNUSED(tx_ring) >= size))
3259                 return 0;
3260         return __e1000_maybe_stop_tx(netdev, size);
3261 }
3262
3263 #define TXD_USE_COUNT(S, X) (((S) >> (X)) + 1 )
3264 static int
3265 e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
3266 {
3267         struct e1000_adapter *adapter = netdev_priv(netdev);
3268         struct e1000_tx_ring *tx_ring;
3269         unsigned int first, max_per_txd = E1000_MAX_DATA_PER_TXD;
3270         unsigned int max_txd_pwr = E1000_MAX_TXD_PWR;
3271         unsigned int tx_flags = 0;
3272         unsigned int len = skb->len;
3273         unsigned long flags;
3274         unsigned int nr_frags = 0;
3275         unsigned int mss = 0;
3276         int count = 0;
3277         int tso;
3278         unsigned int f;
3279         len -= skb->data_len;
3280
3281         /* This goes back to the question of how to logically map a tx queue
3282          * to a flow.  Right now, performance is impacted slightly negatively
3283          * if using multiple tx queues.  If the stack breaks away from a
3284          * single qdisc implementation, we can look at this again. */
3285         tx_ring = adapter->tx_ring;
3286
3287         if (unlikely(skb->len <= 0)) {
3288                 dev_kfree_skb_any(skb);
3289                 return NETDEV_TX_OK;
3290         }
3291
3292         /* 82571 and newer doesn't need the workaround that limited descriptor
3293          * length to 4kB */
3294         if (adapter->hw.mac_type >= e1000_82571)
3295                 max_per_txd = 8192;
3296
3297         mss = skb_shinfo(skb)->gso_size;
3298         /* The controller does a simple calculation to
3299          * make sure there is enough room in the FIFO before
3300          * initiating the DMA for each buffer.  The calc is:
3301          * 4 = ceil(buffer len/mss).  To make sure we don't
3302          * overrun the FIFO, adjust the max buffer len if mss
3303          * drops. */
3304         if (mss) {
3305                 uint8_t hdr_len;
3306                 max_per_txd = min(mss << 2, max_per_txd);
3307                 max_txd_pwr = fls(max_per_txd) - 1;
3308
3309                 /* TSO Workaround for 82571/2/3 Controllers -- if skb->data
3310                 * points to just header, pull a few bytes of payload from
3311                 * frags into skb->data */
3312                 hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
3313                 if (skb->data_len && (hdr_len == (skb->len - skb->data_len))) {
3314                         switch (adapter->hw.mac_type) {
3315                                 unsigned int pull_size;
3316                         case e1000_82544:
3317                                 /* Make sure we have room to chop off 4 bytes,
3318                                  * and that the end alignment will work out to
3319                                  * this hardware's requirements
3320                                  * NOTE: this is a TSO only workaround
3321                                  * if end byte alignment not correct move us
3322                                  * into the next dword */
3323                                 if ((unsigned long)(skb_tail_pointer(skb) - 1) & 4)
3324                                         break;
3325                                 /* fall through */
3326                         case e1000_82571:
3327                         case e1000_82572:
3328                         case e1000_82573:
3329                         case e1000_ich8lan:
3330                                 pull_size = min((unsigned int)4, skb->data_len);
3331                                 if (!__pskb_pull_tail(skb, pull_size)) {
3332                                         DPRINTK(DRV, ERR,
3333                                                 "__pskb_pull_tail failed.\n");
3334                                         dev_kfree_skb_any(skb);
3335                                         return NETDEV_TX_OK;
3336                                 }
3337                                 len = skb->len - skb->data_len;
3338                                 break;
3339                         default:
3340                                 /* do nothing */
3341                                 break;
3342                         }
3343                 }
3344         }
3345
3346         /* reserve a descriptor for the offload context */
3347         if ((mss) || (skb->ip_summed == CHECKSUM_PARTIAL))
3348                 count++;
3349         count++;
3350
3351         /* Controller Erratum workaround */
3352         if (!skb->data_len && tx_ring->last_tx_tso && !skb_is_gso(skb))
3353                 count++;
3354
3355         count += TXD_USE_COUNT(len, max_txd_pwr);
3356
3357         if (adapter->pcix_82544)
3358                 count++;
3359
3360         /* work-around for errata 10 and it applies to all controllers
3361          * in PCI-X mode, so add one more descriptor to the count
3362          */
3363         if (unlikely((adapter->hw.bus_type == e1000_bus_type_pcix) &&
3364                         (len > 2015)))
3365                 count++;
3366
3367         nr_frags = skb_shinfo(skb)->nr_frags;
3368         for (f = 0; f < nr_frags; f++)
3369                 count += TXD_USE_COUNT(skb_shinfo(skb)->frags[f].size,
3370                                        max_txd_pwr);
3371         if (adapter->pcix_82544)
3372                 count += nr_frags;
3373
3374
3375         if (adapter->hw.tx_pkt_filtering &&
3376             (adapter->hw.mac_type == e1000_82573))
3377                 e1000_transfer_dhcp_info(adapter, skb);
3378
3379         if (!spin_trylock_irqsave(&tx_ring->tx_lock, flags))
3380                 /* Collision - tell upper layer to requeue */
3381                 return NETDEV_TX_LOCKED;
3382
3383         /* need: count + 2 desc gap to keep tail from touching
3384          * head, otherwise try next time */
3385         if (unlikely(e1000_maybe_stop_tx(netdev, tx_ring, count + 2))) {
3386                 spin_unlock_irqrestore(&tx_ring->tx_lock, flags);
3387                 return NETDEV_TX_BUSY;
3388         }
3389
3390         if (unlikely(adapter->hw.mac_type == e1000_82547)) {
3391                 if (unlikely(e1000_82547_fifo_workaround(adapter, skb))) {
3392                         netif_stop_queue(netdev);
3393                         mod_timer(&adapter->tx_fifo_stall_timer, jiffies + 1);
3394                         spin_unlock_irqrestore(&tx_ring->tx_lock, flags);
3395                         return NETDEV_TX_BUSY;
3396                 }
3397         }
3398
3399         if (unlikely(adapter->vlgrp && vlan_tx_tag_present(skb))) {
3400                 tx_flags |= E1000_TX_FLAGS_VLAN;
3401                 tx_flags |= (vlan_tx_tag_get(skb) << E1000_TX_FLAGS_VLAN_SHIFT);
3402         }
3403
3404         first = tx_ring->next_to_use;
3405
3406         tso = e1000_tso(adapter, tx_ring, skb);
3407         if (tso < 0) {
3408                 dev_kfree_skb_any(skb);
3409                 spin_unlock_irqrestore(&tx_ring->tx_lock, flags);
3410                 return NETDEV_TX_OK;
3411         }
3412
3413         if (likely(tso)) {
3414                 tx_ring->last_tx_tso = 1;
3415                 tx_flags |= E1000_TX_FLAGS_TSO;
3416         } else if (likely(e1000_tx_csum(adapter, tx_ring, skb)))
3417                 tx_flags |= E1000_TX_FLAGS_CSUM;
3418
3419         /* Old method was to assume IPv4 packet by default if TSO was enabled.
3420          * 82571 hardware supports TSO capabilities for IPv6 as well...
3421          * no longer assume, we must. */
3422         if (likely(skb->protocol == htons(ETH_P_IP)))
3423                 tx_flags |= E1000_TX_FLAGS_IPV4;
3424
3425         e1000_tx_queue(adapter, tx_ring, tx_flags,
3426                        e1000_tx_map(adapter, tx_ring, skb, first,
3427                                     max_per_txd, nr_frags, mss));
3428
3429         netdev->trans_start = jiffies;
3430
3431         /* Make sure there is space in the ring for the next send. */
3432         e1000_maybe_stop_tx(netdev, tx_ring, MAX_SKB_FRAGS + 2);
3433
3434         spin_unlock_irqrestore(&tx_ring->tx_lock, flags);
3435         return NETDEV_TX_OK;
3436 }
3437
3438 /**
3439  * e1000_tx_timeout - Respond to a Tx Hang
3440  * @netdev: network interface device structure
3441  **/
3442
3443 static void
3444 e1000_tx_timeout(struct net_device *netdev)
3445 {
3446         struct e1000_adapter *adapter = netdev_priv(netdev);
3447
3448         /* Do the reset outside of interrupt context */
3449         adapter->tx_timeout_count++;
3450         schedule_work(&adapter->reset_task);
3451 }
3452
3453 static void
3454 e1000_reset_task(struct work_struct *work)
3455 {
3456         struct e1000_adapter *adapter =
3457                 container_of(work, struct e1000_adapter, reset_task);
3458
3459         e1000_reinit_locked(adapter);
3460 }
3461
3462 /**
3463  * e1000_get_stats - Get System Network Statistics
3464  * @netdev: network interface device structure
3465  *
3466  * Returns the address of the device statistics structure.
3467  * The statistics are actually updated from the timer callback.
3468  **/
3469
3470 static struct net_device_stats *
3471 e1000_get_stats(struct net_device *netdev)
3472 {
3473         struct e1000_adapter *adapter = netdev_priv(netdev);
3474
3475         /* only return the current stats */
3476         return &adapter->net_stats;
3477 }
3478
3479 /**
3480  * e1000_change_mtu - Change the Maximum Transfer Unit
3481  * @netdev: network interface device structure
3482  * @new_mtu: new value for maximum frame size
3483  *
3484  * Returns 0 on success, negative on failure
3485  **/
3486
3487 static int
3488 e1000_change_mtu(struct net_device *netdev, int new_mtu)
3489 {
3490         struct e1000_adapter *adapter = netdev_priv(netdev);
3491         int max_frame = new_mtu + ENET_HEADER_SIZE + ETHERNET_FCS_SIZE;
3492         uint16_t eeprom_data = 0;
3493
3494         if ((max_frame < MINIMUM_ETHERNET_FRAME_SIZE) ||
3495             (max_frame > MAX_JUMBO_FRAME_SIZE)) {
3496                 DPRINTK(PROBE, ERR, "Invalid MTU setting\n");
3497                 return -EINVAL;
3498         }
3499
3500         /* Adapter-specific max frame size limits. */
3501         switch (adapter->hw.mac_type) {
3502         case e1000_undefined ... e1000_82542_rev2_1:
3503         case e1000_ich8lan:
3504                 if (max_frame > MAXIMUM_ETHERNET_FRAME_SIZE) {
3505                         DPRINTK(PROBE, ERR, "Jumbo Frames not supported.\n");
3506                         return -EINVAL;
3507                 }
3508                 break;
3509         case e1000_82573:
3510                 /* Jumbo Frames not supported if:
3511                  * - this is not an 82573L device
3512                  * - ASPM is enabled in any way (0x1A bits 3:2) */
3513                 e1000_read_eeprom(&adapter->hw, EEPROM_INIT_3GIO_3, 1,
3514                                   &eeprom_data);
3515                 if ((adapter->hw.device_id != E1000_DEV_ID_82573L) ||
3516                     (eeprom_data & EEPROM_WORD1A_ASPM_MASK)) {
3517                         if (max_frame > MAXIMUM_ETHERNET_FRAME_SIZE) {
3518                                 DPRINTK(PROBE, ERR,
3519                                         "Jumbo Frames not supported.\n");
3520                                 return -EINVAL;
3521                         }
3522                         break;
3523                 }
3524                 /* ERT will be enabled later to enable wire speed receives */
3525
3526                 /* fall through to get support */
3527         case e1000_82571:
3528         case e1000_82572:
3529         case e1000_80003es2lan:
3530 #define MAX_STD_JUMBO_FRAME_SIZE 9234
3531                 if (max_frame > MAX_STD_JUMBO_FRAME_SIZE) {
3532                         DPRINTK(PROBE, ERR, "MTU > 9216 not supported.\n");
3533                         return -EINVAL;
3534                 }
3535                 break;
3536         default:
3537                 /* Capable of supporting up to MAX_JUMBO_FRAME_SIZE limit. */
3538                 break;
3539         }
3540
3541         /* NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN
3542          * means we reserve 2 more, this pushes us to allocate from the next
3543          * larger slab size
3544          * i.e. RXBUFFER_2048 --> size-4096 slab */
3545
3546         if (max_frame <= E1000_RXBUFFER_256)
3547                 adapter->rx_buffer_len = E1000_RXBUFFER_256;
3548         else if (max_frame <= E1000_RXBUFFER_512)
3549                 adapter->rx_buffer_len = E1000_RXBUFFER_512;
3550         else if (max_frame <= E1000_RXBUFFER_1024)
3551                 adapter->rx_buffer_len = E1000_RXBUFFER_1024;
3552         else if (max_frame <= E1000_RXBUFFER_2048)
3553                 adapter->rx_buffer_len = E1000_RXBUFFER_2048;
3554         else if (max_frame <= E1000_RXBUFFER_4096)
3555                 adapter->rx_buffer_len = E1000_RXBUFFER_4096;
3556         else if (max_frame <= E1000_RXBUFFER_8192)
3557                 adapter->rx_buffer_len = E1000_RXBUFFER_8192;
3558         else if (max_frame <= E1000_RXBUFFER_16384)
3559                 adapter->rx_buffer_len = E1000_RXBUFFER_16384;
3560
3561         /* adjust allocation if LPE protects us, and we aren't using SBP */
3562         if (!adapter->hw.tbi_compatibility_on &&
3563             ((max_frame == MAXIMUM_ETHERNET_FRAME_SIZE) ||
3564              (max_frame == MAXIMUM_ETHERNET_VLAN_SIZE)))
3565                 adapter->rx_buffer_len = MAXIMUM_ETHERNET_VLAN_SIZE;
3566
3567         netdev->mtu = new_mtu;
3568         adapter->hw.max_frame_size = max_frame;
3569
3570         if (netif_running(netdev))
3571                 e1000_reinit_locked(adapter);
3572
3573         return 0;
3574 }
3575
3576 /**
3577  * e1000_update_stats - Update the board statistics counters
3578  * @adapter: board private structure
3579  **/
3580
3581 void
3582 e1000_update_stats(struct e1000_adapter *adapter)
3583 {
3584         struct e1000_hw *hw = &adapter->hw;
3585         struct pci_dev *pdev = adapter->pdev;
3586         unsigned long flags;
3587         uint16_t phy_tmp;
3588
3589 #define PHY_IDLE_ERROR_COUNT_MASK 0x00FF
3590
3591         /*
3592          * Prevent stats update while adapter is being reset, or if the pci
3593          * connection is down.
3594          */
3595         if (adapter->link_speed == 0)
3596                 return;
3597         if (pci_channel_offline(pdev))
3598                 return;
3599
3600         spin_lock_irqsave(&adapter->stats_lock, flags);
3601
3602         /* these counters are modified from e1000_adjust_tbi_stats,
3603          * called from the interrupt context, so they must only
3604          * be written while holding adapter->stats_lock
3605          */
3606
3607         adapter->stats.crcerrs += E1000_READ_REG(hw, CRCERRS);
3608         adapter->stats.gprc += E1000_READ_REG(hw, GPRC);
3609         adapter->stats.gorcl += E1000_READ_REG(hw, GORCL);
3610         adapter->stats.gorch += E1000_READ_REG(hw, GORCH);
3611         adapter->stats.bprc += E1000_READ_REG(hw, BPRC);
3612         adapter->stats.mprc += E1000_READ_REG(hw, MPRC);
3613         adapter->stats.roc += E1000_READ_REG(hw, ROC);
3614
3615         if (adapter->hw.mac_type != e1000_ich8lan) {
3616                 adapter->stats.prc64 += E1000_READ_REG(hw, PRC64);
3617                 adapter->stats.prc127 += E1000_READ_REG(hw, PRC127);
3618                 adapter->stats.prc255 += E1000_READ_REG(hw, PRC255);
3619                 adapter->stats.prc511 += E1000_READ_REG(hw, PRC511);
3620                 adapter->stats.prc1023 += E1000_READ_REG(hw, PRC1023);
3621                 adapter->stats.prc1522 += E1000_READ_REG(hw, PRC1522);
3622         }
3623
3624         adapter->stats.symerrs += E1000_READ_REG(hw, SYMERRS);
3625         adapter->stats.mpc += E1000_READ_REG(hw, MPC);
3626         adapter->stats.scc += E1000_READ_REG(hw, SCC);
3627         adapter->stats.ecol += E1000_READ_REG(hw, ECOL);
3628         adapter->stats.mcc += E1000_READ_REG(hw, MCC);
3629         adapter->stats.latecol += E1000_READ_REG(hw, LATECOL);
3630         adapter->stats.dc += E1000_READ_REG(hw, DC);
3631         adapter->stats.sec += E1000_READ_REG(hw, SEC);
3632         adapter->stats.rlec += E1000_READ_REG(hw, RLEC);
3633         adapter->stats.xonrxc += E1000_READ_REG(hw, XONRXC);
3634         adapter->stats.xontxc += E1000_READ_REG(hw, XONTXC);
3635         adapter->stats.xoffrxc += E1000_READ_REG(hw, XOFFRXC);
3636         adapter->stats.xofftxc += E1000_READ_REG(hw, XOFFTXC);
3637         adapter->stats.fcruc += E1000_READ_REG(hw, FCRUC);
3638         adapter->stats.gptc += E1000_READ_REG(hw, GPTC);
3639         adapter->stats.gotcl += E1000_READ_REG(hw, GOTCL);
3640         adapter->stats.gotch += E1000_READ_REG(hw, GOTCH);
3641         adapter->stats.rnbc += E1000_READ_REG(hw, RNBC);
3642         adapter->stats.ruc += E1000_READ_REG(hw, RUC);
3643         adapter->stats.rfc += E1000_READ_REG(hw, RFC);
3644         adapter->stats.rjc += E1000_READ_REG(hw, RJC);
3645         adapter->stats.torl += E1000_READ_REG(hw, TORL);
3646         adapter->stats.torh += E1000_READ_REG(hw, TORH);
3647         adapter->stats.totl += E1000_READ_REG(hw, TOTL);
3648         adapter->stats.toth += E1000_READ_REG(hw, TOTH);
3649         adapter->stats.tpr += E1000_READ_REG(hw, TPR);
3650
3651         if (adapter->hw.mac_type != e1000_ich8lan) {
3652                 adapter->stats.ptc64 += E1000_READ_REG(hw, PTC64);
3653                 adapter->stats.ptc127 += E1000_READ_REG(hw, PTC127);
3654                 adapter->stats.ptc255 += E1000_READ_REG(hw, PTC255);
3655                 adapter->stats.ptc511 += E1000_READ_REG(hw, PTC511);
3656                 adapter->stats.ptc1023 += E1000_READ_REG(hw, PTC1023);
3657                 adapter->stats.ptc1522 += E1000_READ_REG(hw, PTC1522);
3658         }
3659
3660         adapter->stats.mptc += E1000_READ_REG(hw, MPTC);
3661         adapter->stats.bptc += E1000_READ_REG(hw, BPTC);
3662
3663         /* used for adaptive IFS */
3664
3665         hw->tx_packet_delta = E1000_READ_REG(hw, TPT);
3666         adapter->stats.tpt += hw->tx_packet_delta;
3667         hw->collision_delta = E1000_READ_REG(hw, COLC);
3668         adapter->stats.colc += hw->collision_delta;
3669
3670         if (hw->mac_type >= e1000_82543) {
3671                 adapter->stats.algnerrc += E1000_READ_REG(hw, ALGNERRC);
3672                 adapter->stats.rxerrc += E1000_READ_REG(hw, RXERRC);
3673                 adapter->stats.tncrs += E1000_READ_REG(hw, TNCRS);
3674                 adapter->stats.cexterr += E1000_READ_REG(hw, CEXTERR);
3675                 adapter->stats.tsctc += E1000_READ_REG(hw, TSCTC);
3676                 adapter->stats.tsctfc += E1000_READ_REG(hw, TSCTFC);
3677         }
3678         if (hw->mac_type > e1000_82547_rev_2) {
3679                 adapter->stats.iac += E1000_READ_REG(hw, IAC);
3680                 adapter->stats.icrxoc += E1000_READ_REG(hw, ICRXOC);
3681
3682                 if (adapter->hw.mac_type != e1000_ich8lan) {
3683                         adapter->stats.icrxptc += E1000_READ_REG(hw, ICRXPTC);
3684                         adapter->stats.icrxatc += E1000_READ_REG(hw, ICRXATC);
3685                         adapter->stats.ictxptc += E1000_READ_REG(hw, ICTXPTC);
3686                         adapter->stats.ictxatc += E1000_READ_REG(hw, ICTXATC);
3687                         adapter->stats.ictxqec += E1000_READ_REG(hw, ICTXQEC);
3688                         adapter->stats.ictxqmtc += E1000_READ_REG(hw, ICTXQMTC);
3689                         adapter->stats.icrxdmtc += E1000_READ_REG(hw, ICRXDMTC);
3690                 }
3691         }
3692
3693         /* Fill out the OS statistics structure */
3694         adapter->net_stats.rx_packets = adapter->stats.gprc;
3695         adapter->net_stats.tx_packets = adapter->stats.gptc;
3696         adapter->net_stats.rx_bytes = adapter->stats.gorcl;
3697         adapter->net_stats.tx_bytes = adapter->stats.gotcl;
3698         adapter->net_stats.multicast = adapter->stats.mprc;
3699         adapter->net_stats.collisions = adapter->stats.colc;
3700
3701         /* Rx Errors */
3702
3703         /* RLEC on some newer hardware can be incorrect so build
3704         * our own version based on RUC and ROC */
3705         adapter->net_stats.rx_errors = adapter->stats.rxerrc +
3706                 adapter->stats.crcerrs + adapter->stats.algnerrc +
3707                 adapter->stats.ruc + adapter->stats.roc +
3708                 adapter->stats.cexterr;
3709         adapter->stats.rlerrc = adapter->stats.ruc + adapter->stats.roc;
3710         adapter->net_stats.rx_length_errors = adapter->stats.rlerrc;
3711         adapter->net_stats.rx_crc_errors = adapter->stats.crcerrs;
3712         adapter->net_stats.rx_frame_errors = adapter->stats.algnerrc;
3713         adapter->net_stats.rx_missed_errors = adapter->stats.mpc;
3714
3715         /* Tx Errors */
3716         adapter->stats.txerrc = adapter->stats.ecol + adapter->stats.latecol;
3717         adapter->net_stats.tx_errors = adapter->stats.txerrc;
3718         adapter->net_stats.tx_aborted_errors = adapter->stats.ecol;
3719         adapter->net_stats.tx_window_errors = adapter->stats.latecol;
3720         adapter->net_stats.tx_carrier_errors = adapter->stats.tncrs;
3721         if (adapter->hw.bad_tx_carr_stats_fd &&
3722             adapter->link_duplex == FULL_DUPLEX) {
3723                 adapter->net_stats.tx_carrier_errors = 0;
3724                 adapter->stats.tncrs = 0;
3725         }
3726
3727         /* Tx Dropped needs to be maintained elsewhere */
3728
3729         /* Phy Stats */
3730         if (hw->media_type == e1000_media_type_copper) {
3731                 if ((adapter->link_speed == SPEED_1000) &&
3732                    (!e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_tmp))) {
3733                         phy_tmp &= PHY_IDLE_ERROR_COUNT_MASK;
3734                         adapter->phy_stats.idle_errors += phy_tmp;
3735                 }
3736
3737                 if ((hw->mac_type <= e1000_82546) &&
3738                    (hw->phy_type == e1000_phy_m88) &&
3739                    !e1000_read_phy_reg(hw, M88E1000_RX_ERR_CNTR, &phy_tmp))
3740                         adapter->phy_stats.receive_errors += phy_tmp;
3741         }
3742
3743         /* Management Stats */
3744         if (adapter->hw.has_smbus) {
3745                 adapter->stats.mgptc += E1000_READ_REG(hw, MGTPTC);
3746                 adapter->stats.mgprc += E1000_READ_REG(hw, MGTPRC);
3747                 adapter->stats.mgpdc += E1000_READ_REG(hw, MGTPDC);
3748         }
3749
3750         spin_unlock_irqrestore(&adapter->stats_lock, flags);
3751 }
3752 #ifdef CONFIG_PCI_MSI
3753
3754 /**
3755  * e1000_intr_msi - Interrupt Handler
3756  * @irq: interrupt number
3757  * @data: pointer to a network interface device structure
3758  **/
3759
3760 static irqreturn_t
3761 e1000_intr_msi(int irq, void *data)
3762 {
3763         struct net_device *netdev = data;
3764         struct e1000_adapter *adapter = netdev_priv(netdev);
3765         struct e1000_hw *hw = &adapter->hw;
3766 #ifndef CONFIG_E1000_NAPI
3767         int i;
3768 #endif
3769         uint32_t icr = E1000_READ_REG(hw, ICR);
3770
3771 #ifdef CONFIG_E1000_NAPI
3772         /* read ICR disables interrupts using IAM, so keep up with our
3773          * enable/disable accounting */
3774         atomic_inc(&adapter->irq_sem);
3775 #endif
3776         if (icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC)) {
3777                 hw->get_link_status = 1;
3778                 /* 80003ES2LAN workaround-- For packet buffer work-around on
3779                  * link down event; disable receives here in the ISR and reset
3780                  * adapter in watchdog */
3781                 if (netif_carrier_ok(netdev) &&
3782                     (adapter->hw.mac_type == e1000_80003es2lan)) {
3783                         /* disable receives */
3784                         uint32_t rctl = E1000_READ_REG(hw, RCTL);
3785                         E1000_WRITE_REG(hw, RCTL, rctl & ~E1000_RCTL_EN);
3786                 }
3787                 /* guard against interrupt when we're going down */
3788                 if (!test_bit(__E1000_DOWN, &adapter->flags))
3789                         mod_timer(&adapter->watchdog_timer, jiffies + 1);
3790         }
3791
3792 #ifdef CONFIG_E1000_NAPI
3793         if (likely(netif_rx_schedule_prep(netdev))) {
3794                 adapter->total_tx_bytes = 0;
3795                 adapter->total_tx_packets = 0;
3796                 adapter->total_rx_bytes = 0;
3797                 adapter->total_rx_packets = 0;
3798                 __netif_rx_schedule(netdev);
3799         } else
3800                 e1000_irq_enable(adapter);
3801 #else
3802         adapter->total_tx_bytes = 0;
3803         adapter->total_rx_bytes = 0;
3804         adapter->total_tx_packets = 0;
3805         adapter->total_rx_packets = 0;
3806
3807         for (i = 0; i < E1000_MAX_INTR; i++)
3808                 if (unlikely(!adapter->clean_rx(adapter, adapter->rx_ring) &
3809                    !e1000_clean_tx_irq(adapter, adapter->tx_ring)))
3810                         break;
3811
3812         if (likely(adapter->itr_setting & 3))
3813                 e1000_set_itr(adapter);
3814 #endif
3815
3816         return IRQ_HANDLED;
3817 }
3818 #endif
3819
3820 /**
3821  * e1000_intr - Interrupt Handler
3822  * @irq: interrupt number
3823  * @data: pointer to a network interface device structure
3824  **/
3825
3826 static irqreturn_t
3827 e1000_intr(int irq, void *data)
3828 {
3829         struct net_device *netdev = data;
3830         struct e1000_adapter *adapter = netdev_priv(netdev);
3831         struct e1000_hw *hw = &adapter->hw;
3832         uint32_t rctl, icr = E1000_READ_REG(hw, ICR);
3833 #ifndef CONFIG_E1000_NAPI
3834         int i;
3835 #endif
3836         if (unlikely(!icr))
3837                 return IRQ_NONE;  /* Not our interrupt */
3838
3839 #ifdef CONFIG_E1000_NAPI
3840         /* IMS will not auto-mask if INT_ASSERTED is not set, and if it is
3841          * not set, then the adapter didn't send an interrupt */
3842         if (unlikely(hw->mac_type >= e1000_82571 &&
3843                      !(icr & E1000_ICR_INT_ASSERTED)))
3844                 return IRQ_NONE;
3845
3846         /* Interrupt Auto-Mask...upon reading ICR,
3847          * interrupts are masked.  No need for the
3848          * IMC write, but it does mean we should
3849          * account for it ASAP. */
3850         if (likely(hw->mac_type >= e1000_82571))
3851                 atomic_inc(&adapter->irq_sem);
3852 #endif
3853
3854         if (unlikely(icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC))) {
3855                 hw->get_link_status = 1;
3856                 /* 80003ES2LAN workaround--
3857                  * For packet buffer work-around on link down event;
3858                  * disable receives here in the ISR and
3859                  * reset adapter in watchdog
3860                  */
3861                 if (netif_carrier_ok(netdev) &&
3862                     (adapter->hw.mac_type == e1000_80003es2lan)) {
3863                         /* disable receives */
3864                         rctl = E1000_READ_REG(hw, RCTL);
3865                         E1000_WRITE_REG(hw, RCTL, rctl & ~E1000_RCTL_EN);
3866                 }
3867                 /* guard against interrupt when we're going down */
3868                 if (!test_bit(__E1000_DOWN, &adapter->flags))
3869                         mod_timer(&adapter->watchdog_timer, jiffies + 1);
3870         }
3871
3872 #ifdef CONFIG_E1000_NAPI
3873         if (unlikely(hw->mac_type < e1000_82571)) {
3874                 /* disable interrupts, without the synchronize_irq bit */
3875                 atomic_inc(&adapter->irq_sem);
3876                 E1000_WRITE_REG(hw, IMC, ~0);
3877                 E1000_WRITE_FLUSH(hw);
3878         }
3879         if (likely(netif_rx_schedule_prep(netdev))) {
3880                 adapter->total_tx_bytes = 0;
3881                 adapter->total_tx_packets = 0;
3882                 adapter->total_rx_bytes = 0;
3883                 adapter->total_rx_packets = 0;
3884                 __netif_rx_schedule(netdev);
3885         } else
3886                 /* this really should not happen! if it does it is basically a
3887                  * bug, but not a hard error, so enable ints and continue */
3888                 e1000_irq_enable(adapter);
3889 #else
3890         /* Writing IMC and IMS is needed for 82547.
3891          * Due to Hub Link bus being occupied, an interrupt
3892          * de-assertion message is not able to be sent.
3893          * When an interrupt assertion message is generated later,
3894          * two messages are re-ordered and sent out.
3895          * That causes APIC to think 82547 is in de-assertion
3896          * state, while 82547 is in assertion state, resulting
3897          * in dead lock. Writing IMC forces 82547 into
3898          * de-assertion state.
3899          */
3900         if (hw->mac_type == e1000_82547 || hw->mac_type == e1000_82547_rev_2) {
3901                 atomic_inc(&adapter->irq_sem);
3902                 E1000_WRITE_REG(hw, IMC, ~0);
3903         }
3904
3905         adapter->total_tx_bytes = 0;
3906         adapter->total_rx_bytes = 0;
3907         adapter->total_tx_packets = 0;
3908         adapter->total_rx_packets = 0;
3909
3910         for (i = 0; i < E1000_MAX_INTR; i++)
3911                 if (unlikely(!adapter->clean_rx(adapter, adapter->rx_ring) &
3912                    !e1000_clean_tx_irq(adapter, adapter->tx_ring)))
3913                         break;
3914
3915         if (likely(adapter->itr_setting & 3))
3916                 e1000_set_itr(adapter);
3917
3918         if (hw->mac_type == e1000_82547 || hw->mac_type == e1000_82547_rev_2)
3919                 e1000_irq_enable(adapter);
3920
3921 #endif
3922         return IRQ_HANDLED;
3923 }
3924
3925 #ifdef CONFIG_E1000_NAPI
3926 /**
3927  * e1000_clean - NAPI Rx polling callback
3928  * @adapter: board private structure
3929  **/
3930
3931 static int
3932 e1000_clean(struct net_device *poll_dev, int *budget)
3933 {
3934         struct e1000_adapter *adapter;
3935         int work_to_do = min(*budget, poll_dev->quota);
3936         int tx_cleaned = 0, work_done = 0;
3937
3938         /* Must NOT use netdev_priv macro here. */
3939         adapter = poll_dev->priv;
3940
3941         /* Keep link state information with original netdev */
3942         if (!netif_carrier_ok(poll_dev))
3943                 goto quit_polling;
3944
3945         /* e1000_clean is called per-cpu.  This lock protects
3946          * tx_ring[0] from being cleaned by multiple cpus
3947          * simultaneously.  A failure obtaining the lock means
3948          * tx_ring[0] is currently being cleaned anyway. */
3949         if (spin_trylock(&adapter->tx_queue_lock)) {
3950                 tx_cleaned = e1000_clean_tx_irq(adapter,
3951                                                 &adapter->tx_ring[0]);
3952                 spin_unlock(&adapter->tx_queue_lock);
3953         }
3954
3955         adapter->clean_rx(adapter, &adapter->rx_ring[0],
3956                           &work_done, work_to_do);
3957
3958         *budget -= work_done;
3959         poll_dev->quota -= work_done;
3960
3961         /* If no Tx and not enough Rx work done, exit the polling mode */
3962         if ((!tx_cleaned && (work_done == 0)) ||
3963            !netif_running(poll_dev)) {
3964 quit_polling:
3965                 if (likely(adapter->itr_setting & 3))
3966                         e1000_set_itr(adapter);
3967                 netif_rx_complete(poll_dev);
3968                 e1000_irq_enable(adapter);
3969                 return 0;
3970         }
3971
3972         return 1;
3973 }
3974
3975 #endif
3976 /**
3977  * e1000_clean_tx_irq - Reclaim resources after transmit completes
3978  * @adapter: board private structure
3979  **/
3980
3981 static boolean_t
3982 e1000_clean_tx_irq(struct e1000_adapter *adapter,
3983                    struct e1000_tx_ring *tx_ring)
3984 {
3985         struct net_device *netdev = adapter->netdev;
3986         struct e1000_tx_desc *tx_desc, *eop_desc;
3987         struct e1000_buffer *buffer_info;
3988         unsigned int i, eop;
3989 #ifdef CONFIG_E1000_NAPI
3990         unsigned int count = 0;
3991 #endif
3992         boolean_t cleaned = FALSE;
3993         unsigned int total_tx_bytes=0, total_tx_packets=0;
3994
3995         i = tx_ring->next_to_clean;
3996         eop = tx_ring->buffer_info[i].next_to_watch;
3997         eop_desc = E1000_TX_DESC(*tx_ring, eop);
3998
3999         while (eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) {
4000                 for (cleaned = FALSE; !cleaned; ) {
4001                         tx_desc = E1000_TX_DESC(*tx_ring, i);
4002                         buffer_info = &tx_ring->buffer_info[i];
4003                         cleaned = (i == eop);
4004
4005                         if (cleaned) {
4006                                 struct sk_buff *skb = buffer_info->skb;
4007                                 unsigned int segs, bytecount;
4008                                 segs = skb_shinfo(skb)->gso_segs ?: 1;
4009                                 /* multiply data chunks by size of headers */
4010                                 bytecount = ((segs - 1) * skb_headlen(skb)) +
4011                                             skb->len;
4012                                 total_tx_packets += segs;
4013                                 total_tx_bytes += bytecount;
4014                         }
4015                         e1000_unmap_and_free_tx_resource(adapter, buffer_info);
4016                         tx_desc->upper.data = 0;
4017
4018                         if (unlikely(++i == tx_ring->count)) i = 0;
4019                 }
4020
4021                 eop = tx_ring->buffer_info[i].next_to_watch;
4022                 eop_desc = E1000_TX_DESC(*tx_ring, eop);
4023 #ifdef CONFIG_E1000_NAPI
4024 #define E1000_TX_WEIGHT 64
4025                 /* weight of a sort for tx, to avoid endless transmit cleanup */
4026                 if (count++ == E1000_TX_WEIGHT) break;
4027 #endif
4028         }
4029
4030         tx_ring->next_to_clean = i;
4031
4032 #define TX_WAKE_THRESHOLD 32
4033         if (unlikely(cleaned && netif_carrier_ok(netdev) &&
4034                      E1000_DESC_UNUSED(tx_ring) >= TX_WAKE_THRESHOLD)) {
4035                 /* Make sure that anybody stopping the queue after this
4036                  * sees the new next_to_clean.
4037                  */
4038                 smp_mb();
4039                 if (netif_queue_stopped(netdev)) {
4040                         netif_wake_queue(netdev);
4041                         ++adapter->restart_queue;
4042                 }
4043         }
4044
4045         if (adapter->detect_tx_hung) {
4046                 /* Detect a transmit hang in hardware, this serializes the
4047                  * check with the clearing of time_stamp and movement of i */
4048                 adapter->detect_tx_hung = FALSE;
4049                 if (tx_ring->buffer_info[eop].dma &&
4050                     time_after(jiffies, tx_ring->buffer_info[eop].time_stamp +
4051                                (adapter->tx_timeout_factor * HZ))
4052                     && !(E1000_READ_REG(&adapter->hw, STATUS) &
4053                          E1000_STATUS_TXOFF)) {
4054
4055                         /* detected Tx unit hang */
4056                         DPRINTK(DRV, ERR, "Detected Tx Unit Hang\n"
4057                                         "  Tx Queue             <%lu>\n"
4058                                         "  TDH                  <%x>\n"
4059                                         "  TDT                  <%x>\n"
4060                                         "  next_to_use          <%x>\n"
4061                                         "  next_to_clean        <%x>\n"
4062                                         "buffer_info[next_to_clean]\n"
4063                                         "  time_stamp           <%lx>\n"
4064                                         "  next_to_watch        <%x>\n"
4065                                         "  jiffies              <%lx>\n"
4066                                         "  next_to_watch.status <%x>\n",
4067                                 (unsigned long)((tx_ring - adapter->tx_ring) /
4068                                         sizeof(struct e1000_tx_ring)),
4069                                 readl(adapter->hw.hw_addr + tx_ring->tdh),
4070                                 readl(adapter->hw.hw_addr + tx_ring->tdt),
4071                                 tx_ring->next_to_use,
4072                                 tx_ring->next_to_clean,
4073                                 tx_ring->buffer_info[eop].time_stamp,
4074                                 eop,
4075                                 jiffies,
4076                                 eop_desc->upper.fields.status);
4077                         netif_stop_queue(netdev);
4078                 }
4079         }
4080         adapter->total_tx_bytes += total_tx_bytes;
4081         adapter->total_tx_packets += total_tx_packets;
4082         return cleaned;
4083 }
4084
4085 /**
4086  * e1000_rx_checksum - Receive Checksum Offload for 82543
4087  * @adapter:     board private structure
4088  * @status_err:  receive descriptor status and error fields
4089  * @csum:        receive descriptor csum field
4090  * @sk_buff:     socket buffer with received data
4091  **/
4092
4093 static void
4094 e1000_rx_checksum(struct e1000_adapter *adapter,
4095                   uint32_t status_err, uint32_t csum,
4096                   struct sk_buff *skb)
4097 {
4098         uint16_t status = (uint16_t)status_err;
4099         uint8_t errors = (uint8_t)(status_err >> 24);
4100         skb->ip_summed = CHECKSUM_NONE;
4101
4102         /* 82543 or newer only */
4103         if (unlikely(adapter->hw.mac_type < e1000_82543)) return;
4104         /* Ignore Checksum bit is set */
4105         if (unlikely(status & E1000_RXD_STAT_IXSM)) return;
4106         /* TCP/UDP checksum error bit is set */
4107         if (unlikely(errors & E1000_RXD_ERR_TCPE)) {
4108                 /* let the stack verify checksum errors */
4109                 adapter->hw_csum_err++;
4110                 return;
4111         }
4112         /* TCP/UDP Checksum has not been calculated */
4113         if (adapter->hw.mac_type <= e1000_82547_rev_2) {
4114                 if (!(status & E1000_RXD_STAT_TCPCS))
4115                         return;
4116         } else {
4117                 if (!(status & (E1000_RXD_STAT_TCPCS | E1000_RXD_STAT_UDPCS)))
4118                         return;
4119         }
4120         /* It must be a TCP or UDP packet with a valid checksum */
4121         if (likely(status & E1000_RXD_STAT_TCPCS)) {
4122                 /* TCP checksum is good */
4123                 skb->ip_summed = CHECKSUM_UNNECESSARY;
4124         } else if (adapter->hw.mac_type > e1000_82547_rev_2) {
4125                 /* IP fragment with UDP payload */
4126                 /* Hardware complements the payload checksum, so we undo it
4127                  * and then put the value in host order for further stack use.
4128                  */
4129                 csum = ntohl(csum ^ 0xFFFF);
4130                 skb->csum = csum;
4131                 skb->ip_summed = CHECKSUM_COMPLETE;
4132         }
4133         adapter->hw_csum_good++;
4134 }
4135
4136 /**
4137  * e1000_clean_rx_irq - Send received data up the network stack; legacy
4138  * @adapter: board private structure
4139  **/
4140
4141 static boolean_t
4142 #ifdef CONFIG_E1000_NAPI
4143 e1000_clean_rx_irq(struct e1000_adapter *adapter,
4144                    struct e1000_rx_ring *rx_ring,
4145                    int *work_done, int work_to_do)
4146 #else
4147 e1000_clean_rx_irq(struct e1000_adapter *adapter,
4148                    struct e1000_rx_ring *rx_ring)
4149 #endif
4150 {
4151         struct net_device *netdev = adapter->netdev;
4152         struct pci_dev *pdev = adapter->pdev;
4153         struct e1000_rx_desc *rx_desc, *next_rxd;
4154         struct e1000_buffer *buffer_info, *next_buffer;
4155         unsigned long flags;
4156         uint32_t length;
4157         uint8_t last_byte;
4158         unsigned int i;
4159         int cleaned_count = 0;
4160         boolean_t cleaned = FALSE;
4161         unsigned int total_rx_bytes=0, total_rx_packets=0;
4162
4163         i = rx_ring->next_to_clean;
4164         rx_desc = E1000_RX_DESC(*rx_ring, i);
4165         buffer_info = &rx_ring->buffer_info[i];
4166
4167         while (rx_desc->status & E1000_RXD_STAT_DD) {
4168                 struct sk_buff *skb;
4169                 u8 status;
4170
4171 #ifdef CONFIG_E1000_NAPI
4172                 if (*work_done >= work_to_do)
4173                         break;
4174                 (*work_done)++;
4175 #endif
4176                 status = rx_desc->status;
4177                 skb = buffer_info->skb;
4178                 buffer_info->skb = NULL;
4179
4180                 prefetch(skb->data - NET_IP_ALIGN);
4181
4182                 if (++i == rx_ring->count) i = 0;
4183                 next_rxd = E1000_RX_DESC(*rx_ring, i);
4184                 prefetch(next_rxd);
4185
4186                 next_buffer = &rx_ring->buffer_info[i];
4187
4188                 cleaned = TRUE;
4189                 cleaned_count++;
4190                 pci_unmap_single(pdev,
4191                                  buffer_info->dma,
4192                                  buffer_info->length,
4193                                  PCI_DMA_FROMDEVICE);
4194
4195                 length = le16_to_cpu(rx_desc->length);
4196
4197                 if (unlikely(!(status & E1000_RXD_STAT_EOP))) {
4198                         /* All receives must fit into a single buffer */
4199                         E1000_DBG("%s: Receive packet consumed multiple"
4200                                   " buffers\n", netdev->name);
4201                         /* recycle */
4202                         buffer_info->skb = skb;
4203                         goto next_desc;
4204                 }
4205
4206                 if (unlikely(rx_desc->errors & E1000_RXD_ERR_FRAME_ERR_MASK)) {
4207                         last_byte = *(skb->data + length - 1);
4208                         if (TBI_ACCEPT(&adapter->hw, status,
4209                                       rx_desc->errors, length, last_byte)) {
4210                                 spin_lock_irqsave(&adapter->stats_lock, flags);
4211                                 e1000_tbi_adjust_stats(&adapter->hw,
4212                                                        &adapter->stats,
4213                                                        length, skb->data);
4214                                 spin_unlock_irqrestore(&adapter->stats_lock,
4215                                                        flags);
4216                                 length--;
4217                         } else {
4218                                 /* recycle */
4219                                 buffer_info->skb = skb;
4220                                 goto next_desc;
4221                         }
4222                 }
4223
4224                 /* adjust length to remove Ethernet CRC, this must be
4225                  * done after the TBI_ACCEPT workaround above */
4226                 length -= 4;
4227
4228                 /* probably a little skewed due to removing CRC */
4229                 total_rx_bytes += length;
4230                 total_rx_packets++;
4231
4232                 /* code added for copybreak, this should improve
4233                  * performance for small packets with large amounts
4234                  * of reassembly being done in the stack */
4235                 if (length < copybreak) {
4236                         struct sk_buff *new_skb =
4237                             netdev_alloc_skb(netdev, length + NET_IP_ALIGN);
4238                         if (new_skb) {
4239                                 skb_reserve(new_skb, NET_IP_ALIGN);
4240                                 skb_copy_to_linear_data_offset(new_skb,
4241                                                                -NET_IP_ALIGN,
4242                                                                (skb->data -
4243                                                                 NET_IP_ALIGN),
4244                                                                (length +
4245                                                                 NET_IP_ALIGN));
4246                                 /* save the skb in buffer_info as good */
4247                                 buffer_info->skb = skb;
4248                                 skb = new_skb;
4249                         }
4250                         /* else just continue with the old one */
4251                 }
4252                 /* end copybreak code */
4253                 skb_put(skb, length);
4254
4255                 /* Receive Checksum Offload */
4256                 e1000_rx_checksum(adapter,
4257                                   (uint32_t)(status) |
4258                                   ((uint32_t)(rx_desc->errors) << 24),
4259                                   le16_to_cpu(rx_desc->csum), skb);
4260
4261                 skb->protocol = eth_type_trans(skb, netdev);
4262 #ifdef CONFIG_E1000_NAPI
4263                 if (unlikely(adapter->vlgrp &&
4264                             (status & E1000_RXD_STAT_VP))) {
4265                         vlan_hwaccel_receive_skb(skb, adapter->vlgrp,
4266                                                  le16_to_cpu(rx_desc->special) &
4267                                                  E1000_RXD_SPC_VLAN_MASK);
4268                 } else {
4269                         netif_receive_skb(skb);
4270                 }
4271 #else /* CONFIG_E1000_NAPI */
4272                 if (unlikely(adapter->vlgrp &&
4273                             (status & E1000_RXD_STAT_VP))) {
4274                         vlan_hwaccel_rx(skb, adapter->vlgrp,
4275                                         le16_to_cpu(rx_desc->special) &
4276                                         E1000_RXD_SPC_VLAN_MASK);
4277                 } else {
4278                         netif_rx(skb);
4279                 }
4280 #endif /* CONFIG_E1000_NAPI */
4281                 netdev->last_rx = jiffies;
4282
4283 next_desc:
4284                 rx_desc->status = 0;
4285
4286                 /* return some buffers to hardware, one at a time is too slow */
4287                 if (unlikely(cleaned_count >= E1000_RX_BUFFER_WRITE)) {
4288                         adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count);
4289                         cleaned_count = 0;
4290                 }
4291
4292                 /* use prefetched values */
4293                 rx_desc = next_rxd;
4294                 buffer_info = next_buffer;
4295         }
4296         rx_ring->next_to_clean = i;
4297
4298         cleaned_count = E1000_DESC_UNUSED(rx_ring);
4299         if (cleaned_count)
4300                 adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count);
4301
4302         adapter->total_rx_packets += total_rx_packets;
4303         adapter->total_rx_bytes += total_rx_bytes;
4304         return cleaned;
4305 }
4306
4307 /**
4308  * e1000_clean_rx_irq_ps - Send received data up the network stack; packet split
4309  * @adapter: board private structure
4310  **/
4311
4312 static boolean_t
4313 #ifdef CONFIG_E1000_NAPI
4314 e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
4315                       struct e1000_rx_ring *rx_ring,
4316                       int *work_done, int work_to_do)
4317 #else
4318 e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
4319                       struct e1000_rx_ring *rx_ring)
4320 #endif
4321 {
4322         union e1000_rx_desc_packet_split *rx_desc, *next_rxd;
4323         struct net_device *netdev = adapter->netdev;
4324         struct pci_dev *pdev = adapter->pdev;
4325         struct e1000_buffer *buffer_info, *next_buffer;
4326         struct e1000_ps_page *ps_page;
4327         struct e1000_ps_page_dma *ps_page_dma;
4328         struct sk_buff *skb;
4329         unsigned int i, j;
4330         uint32_t length, staterr;
4331         int cleaned_count = 0;
4332         boolean_t cleaned = FALSE;
4333         unsigned int total_rx_bytes=0, total_rx_packets=0;
4334
4335         i = rx_ring->next_to_clean;
4336         rx_desc = E1000_RX_DESC_PS(*rx_ring, i);
4337         staterr = le32_to_cpu(rx_desc->wb.middle.status_error);
4338         buffer_info = &rx_ring->buffer_info[i];
4339
4340         while (staterr & E1000_RXD_STAT_DD) {
4341                 ps_page = &rx_ring->ps_page[i];
4342                 ps_page_dma = &rx_ring->ps_page_dma[i];
4343 #ifdef CONFIG_E1000_NAPI
4344                 if (unlikely(*work_done >= work_to_do))
4345                         break;
4346                 (*work_done)++;
4347 #endif
4348                 skb = buffer_info->skb;
4349
4350                 /* in the packet split case this is header only */
4351                 prefetch(skb->data - NET_IP_ALIGN);
4352
4353                 if (++i == rx_ring->count) i = 0;
4354                 next_rxd = E1000_RX_DESC_PS(*rx_ring, i);
4355                 prefetch(next_rxd);
4356
4357                 next_buffer = &rx_ring->buffer_info[i];
4358
4359                 cleaned = TRUE;
4360                 cleaned_count++;
4361                 pci_unmap_single(pdev, buffer_info->dma,
4362                                  buffer_info->length,
4363                                  PCI_DMA_FROMDEVICE);
4364
4365                 if (unlikely(!(staterr & E1000_RXD_STAT_EOP))) {
4366                         E1000_DBG("%s: Packet Split buffers didn't pick up"
4367                                   " the full packet\n", netdev->name);
4368                         dev_kfree_skb_irq(skb);
4369                         goto next_desc;
4370                 }
4371
4372                 if (unlikely(staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK)) {
4373                         dev_kfree_skb_irq(skb);
4374                         goto next_desc;
4375                 }
4376
4377                 length = le16_to_cpu(rx_desc->wb.middle.length0);
4378
4379                 if (unlikely(!length)) {
4380                         E1000_DBG("%s: Last part of the packet spanning"
4381                                   " multiple descriptors\n", netdev->name);
4382                         dev_kfree_skb_irq(skb);
4383                         goto next_desc;
4384                 }
4385
4386                 /* Good Receive */
4387                 skb_put(skb, length);
4388
4389                 {
4390                 /* this looks ugly, but it seems compiler issues make it
4391                    more efficient than reusing j */
4392                 int l1 = le16_to_cpu(rx_desc->wb.upper.length[0]);
4393
4394                 /* page alloc/put takes too long and effects small packet
4395                  * throughput, so unsplit small packets and save the alloc/put*/
4396                 if (l1 && (l1 <= copybreak) && ((length + l1) <= adapter->rx_ps_bsize0)) {
4397                         u8 *vaddr;
4398                         /* there is no documentation about how to call
4399                          * kmap_atomic, so we can't hold the mapping
4400                          * very long */
4401                         pci_dma_sync_single_for_cpu(pdev,
4402                                 ps_page_dma->ps_page_dma[0],
4403                                 PAGE_SIZE,
4404                                 PCI_DMA_FROMDEVICE);
4405                         vaddr = kmap_atomic(ps_page->ps_page[0],
4406                                             KM_SKB_DATA_SOFTIRQ);
4407                         memcpy(skb_tail_pointer(skb), vaddr, l1);
4408                         kunmap_atomic(vaddr, KM_SKB_DATA_SOFTIRQ);
4409                         pci_dma_sync_single_for_device(pdev,
4410                                 ps_page_dma->ps_page_dma[0],
4411                                 PAGE_SIZE, PCI_DMA_FROMDEVICE);
4412                         /* remove the CRC */
4413                         l1 -= 4;
4414                         skb_put(skb, l1);
4415                         goto copydone;
4416                 } /* if */
4417                 }
4418
4419                 for (j = 0; j < adapter->rx_ps_pages; j++) {
4420                         if (!(length= le16_to_cpu(rx_desc->wb.upper.length[j])))
4421                                 break;
4422                         pci_unmap_page(pdev, ps_page_dma->ps_page_dma[j],
4423                                         PAGE_SIZE, PCI_DMA_FROMDEVICE);
4424                         ps_page_dma->ps_page_dma[j] = 0;
4425                         skb_fill_page_desc(skb, j, ps_page->ps_page[j], 0,
4426                                            length);
4427                         ps_page->ps_page[j] = NULL;
4428                         skb->len += length;
4429                         skb->data_len += length;
4430                         skb->truesize += length;
4431                 }
4432
4433                 /* strip the ethernet crc, problem is we're using pages now so
4434                  * this whole operation can get a little cpu intensive */
4435                 pskb_trim(skb, skb->len - 4);
4436
4437 copydone:
4438                 total_rx_bytes += skb->len;
4439                 total_rx_packets++;
4440
4441                 e1000_rx_checksum(adapter, staterr,
4442                                   le16_to_cpu(rx_desc->wb.lower.hi_dword.csum_ip.csum), skb);
4443                 skb->protocol = eth_type_trans(skb, netdev);
4444
4445                 if (likely(rx_desc->wb.upper.header_status &
4446                            cpu_to_le16(E1000_RXDPS_HDRSTAT_HDRSP)))
4447                         adapter->rx_hdr_split++;
4448 #ifdef CONFIG_E1000_NAPI
4449                 if (unlikely(adapter->vlgrp && (staterr & E1000_RXD_STAT_VP))) {
4450                         vlan_hwaccel_receive_skb(skb, adapter->vlgrp,
4451                                 le16_to_cpu(rx_desc->wb.middle.vlan) &
4452                                 E1000_RXD_SPC_VLAN_MASK);
4453                 } else {
4454                         netif_receive_skb(skb);
4455                 }
4456 #else /* CONFIG_E1000_NAPI */
4457                 if (unlikely(adapter->vlgrp && (staterr & E1000_RXD_STAT_VP))) {
4458                         vlan_hwaccel_rx(skb, adapter->vlgrp,
4459                                 le16_to_cpu(rx_desc->wb.middle.vlan) &
4460                                 E1000_RXD_SPC_VLAN_MASK);
4461                 } else {
4462                         netif_rx(skb);
4463                 }
4464 #endif /* CONFIG_E1000_NAPI */
4465                 netdev->last_rx = jiffies;
4466
4467 next_desc:
4468                 rx_desc->wb.middle.status_error &= cpu_to_le32(~0xFF);
4469                 buffer_info->skb = NULL;
4470
4471                 /* return some buffers to hardware, one at a time is too slow */
4472                 if (unlikely(cleaned_count >= E1000_RX_BUFFER_WRITE)) {
4473                         adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count);
4474                         cleaned_count = 0;
4475                 }
4476
4477                 /* use prefetched values */
4478                 rx_desc = next_rxd;
4479                 buffer_info = next_buffer;
4480
4481                 staterr = le32_to_cpu(rx_desc->wb.middle.status_error);
4482         }
4483         rx_ring->next_to_clean = i;
4484
4485         cleaned_count = E1000_DESC_UNUSED(rx_ring);
4486         if (cleaned_count)
4487                 adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count);
4488
4489         adapter->total_rx_packets += total_rx_packets;
4490         adapter->total_rx_bytes += total_rx_bytes;
4491         return cleaned;
4492 }
4493
4494 /**
4495  * e1000_alloc_rx_buffers - Replace used receive buffers; legacy & extended
4496  * @adapter: address of board private structure
4497  **/
4498
4499 static void
4500 e1000_alloc_rx_buffers(struct e1000_adapter *adapter,
4501                        struct e1000_rx_ring *rx_ring,
4502                        int cleaned_count)
4503 {
4504         struct net_device *netdev = adapter->netdev;
4505         struct pci_dev *pdev = adapter->pdev;
4506         struct e1000_rx_desc *rx_desc;
4507         struct e1000_buffer *buffer_info;
4508         struct sk_buff *skb;
4509         unsigned int i;
4510         unsigned int bufsz = adapter->rx_buffer_len + NET_IP_ALIGN;
4511
4512         i = rx_ring->next_to_use;
4513         buffer_info = &rx_ring->buffer_info[i];
4514
4515         while (cleaned_count--) {
4516                 skb = buffer_info->skb;
4517                 if (skb) {
4518                         skb_trim(skb, 0);
4519                         goto map_skb;
4520                 }
4521
4522                 skb = netdev_alloc_skb(netdev, bufsz);
4523                 if (unlikely(!skb)) {
4524                         /* Better luck next round */
4525                         adapter->alloc_rx_buff_failed++;
4526                         break;
4527                 }
4528
4529                 /* Fix for errata 23, can't cross 64kB boundary */
4530                 if (!e1000_check_64k_bound(adapter, skb->data, bufsz)) {
4531                         struct sk_buff *oldskb = skb;
4532                         DPRINTK(RX_ERR, ERR, "skb align check failed: %u bytes "
4533                                              "at %p\n", bufsz, skb->data);
4534                         /* Try again, without freeing the previous */
4535                         skb = netdev_alloc_skb(netdev, bufsz);
4536                         /* Failed allocation, critical failure */
4537                         if (!skb) {
4538                                 dev_kfree_skb(oldskb);
4539                                 break;
4540                         }
4541
4542                         if (!e1000_check_64k_bound(adapter, skb->data, bufsz)) {
4543                                 /* give up */
4544                                 dev_kfree_skb(skb);
4545                                 dev_kfree_skb(oldskb);
4546                                 break; /* while !buffer_info->skb */
4547                         }
4548
4549                         /* Use new allocation */
4550                         dev_kfree_skb(oldskb);
4551                 }
4552                 /* Make buffer alignment 2 beyond a 16 byte boundary
4553                  * this will result in a 16 byte aligned IP header after
4554                  * the 14 byte MAC header is removed
4555                  */
4556                 skb_reserve(skb, NET_IP_ALIGN);
4557
4558                 buffer_info->skb = skb;
4559                 buffer_info->length = adapter->rx_buffer_len;
4560 map_skb:
4561                 buffer_info->dma = pci_map_single(pdev,
4562                                                   skb->data,
4563                                                   adapter->rx_buffer_len,
4564                                                   PCI_DMA_FROMDEVICE);
4565
4566                 /* Fix for errata 23, can't cross 64kB boundary */
4567                 if (!e1000_check_64k_bound(adapter,
4568                                         (void *)(unsigned long)buffer_info->dma,
4569                                         adapter->rx_buffer_len)) {
4570                         DPRINTK(RX_ERR, ERR,
4571                                 "dma align check failed: %u bytes at %p\n",
4572                                 adapter->rx_buffer_len,
4573                                 (void *)(unsigned long)buffer_info->dma);
4574                         dev_kfree_skb(skb);
4575                         buffer_info->skb = NULL;
4576
4577                         pci_unmap_single(pdev, buffer_info->dma,
4578                                          adapter->rx_buffer_len,
4579                                          PCI_DMA_FROMDEVICE);
4580
4581                         break; /* while !buffer_info->skb */
4582                 }
4583                 rx_desc = E1000_RX_DESC(*rx_ring, i);
4584                 rx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
4585
4586                 if (unlikely(++i == rx_ring->count))
4587                         i = 0;
4588                 buffer_info = &rx_ring->buffer_info[i];
4589         }
4590
4591         if (likely(rx_ring->next_to_use != i)) {
4592                 rx_ring->next_to_use = i;
4593                 if (unlikely(i-- == 0))
4594                         i = (rx_ring->count - 1);
4595
4596                 /* Force memory writes to complete before letting h/w
4597                  * know there are new descriptors to fetch.  (Only
4598                  * applicable for weak-ordered memory model archs,
4599                  * such as IA-64). */
4600                 wmb();
4601                 writel(i, adapter->hw.hw_addr + rx_ring->rdt);
4602         }
4603 }
4604
4605 /**
4606  * e1000_alloc_rx_buffers_ps - Replace used receive buffers; packet split
4607  * @adapter: address of board private structure
4608  **/
4609
4610 static void
4611 e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter,
4612                           struct e1000_rx_ring *rx_ring,
4613                           int cleaned_count)
4614 {
4615         struct net_device *netdev = adapter->netdev;
4616         struct pci_dev *pdev = adapter->pdev;
4617         union e1000_rx_desc_packet_split *rx_desc;
4618         struct e1000_buffer *buffer_info;
4619         struct e1000_ps_page *ps_page;
4620         struct e1000_ps_page_dma *ps_page_dma;
4621         struct sk_buff *skb;
4622         unsigned int i, j;
4623
4624         i = rx_ring->next_to_use;
4625         buffer_info = &rx_ring->buffer_info[i];
4626         ps_page = &rx_ring->ps_page[i];
4627         ps_page_dma = &rx_ring->ps_page_dma[i];
4628
4629         while (cleaned_count--) {
4630                 rx_desc = E1000_RX_DESC_PS(*rx_ring, i);
4631
4632                 for (j = 0; j < PS_PAGE_BUFFERS; j++) {
4633                         if (j < adapter->rx_ps_pages) {
4634                                 if (likely(!ps_page->ps_page[j])) {
4635                                         ps_page->ps_page[j] =
4636                                                 alloc_page(GFP_ATOMIC);
4637                                         if (unlikely(!ps_page->ps_page[j])) {
4638                                                 adapter->alloc_rx_buff_failed++;
4639                                                 goto no_buffers;
4640                                         }
4641                                         ps_page_dma->ps_page_dma[j] =
4642                                                 pci_map_page(pdev,
4643                                                             ps_page->ps_page[j],
4644                                                             0, PAGE_SIZE,
4645                                                             PCI_DMA_FROMDEVICE);
4646                                 }
4647                                 /* Refresh the desc even if buffer_addrs didn't
4648                                  * change because each write-back erases
4649                                  * this info.
4650                                  */
4651                                 rx_desc->read.buffer_addr[j+1] =
4652                                      cpu_to_le64(ps_page_dma->ps_page_dma[j]);
4653                         } else
4654                                 rx_desc->read.buffer_addr[j+1] = ~0;
4655                 }
4656
4657                 skb = netdev_alloc_skb(netdev,
4658                                        adapter->rx_ps_bsize0 + NET_IP_ALIGN);
4659
4660                 if (unlikely(!skb)) {
4661                         adapter->alloc_rx_buff_failed++;
4662                         break;
4663                 }
4664
4665                 /* Make buffer alignment 2 beyond a 16 byte boundary
4666                  * this will result in a 16 byte aligned IP header after
4667                  * the 14 byte MAC header is removed
4668                  */
4669                 skb_reserve(skb, NET_IP_ALIGN);
4670
4671                 buffer_info->skb = skb;
4672                 buffer_info->length = adapter->rx_ps_bsize0;
4673                 buffer_info->dma = pci_map_single(pdev, skb->data,
4674                                                   adapter->rx_ps_bsize0,
4675                                                   PCI_DMA_FROMDEVICE);
4676
4677                 rx_desc->read.buffer_addr[0] = cpu_to_le64(buffer_info->dma);
4678
4679                 if (unlikely(++i == rx_ring->count)) i = 0;
4680                 buffer_info = &rx_ring->buffer_info[i];
4681                 ps_page = &rx_ring->ps_page[i];
4682                 ps_page_dma = &rx_ring->ps_page_dma[i];
4683         }
4684
4685 no_buffers:
4686         if (likely(rx_ring->next_to_use != i)) {
4687                 rx_ring->next_to_use = i;
4688                 if (unlikely(i-- == 0)) i = (rx_ring->count - 1);
4689
4690                 /* Force memory writes to complete before letting h/w
4691                  * know there are new descriptors to fetch.  (Only
4692                  * applicable for weak-ordered memory model archs,
4693                  * such as IA-64). */
4694                 wmb();
4695                 /* Hardware increments by 16 bytes, but packet split
4696                  * descriptors are 32 bytes...so we increment tail
4697                  * twice as much.
4698                  */
4699                 writel(i<<1, adapter->hw.hw_addr + rx_ring->rdt);
4700         }
4701 }
4702
4703 /**
4704  * e1000_smartspeed - Workaround for SmartSpeed on 82541 and 82547 controllers.
4705  * @adapter:
4706  **/
4707
4708 static void
4709 e1000_smartspeed(struct e1000_adapter *adapter)
4710 {
4711         uint16_t phy_status;
4712         uint16_t phy_ctrl;
4713
4714         if ((adapter->hw.phy_type != e1000_phy_igp) || !adapter->hw.autoneg ||
4715            !(adapter->hw.autoneg_advertised & ADVERTISE_1000_FULL))
4716                 return;
4717
4718         if (adapter->smartspeed == 0) {
4719                 /* If Master/Slave config fault is asserted twice,
4720                  * we assume back-to-back */
4721                 e1000_read_phy_reg(&adapter->hw, PHY_1000T_STATUS, &phy_status);
4722                 if (!(phy_status & SR_1000T_MS_CONFIG_FAULT)) return;
4723                 e1000_read_phy_reg(&adapter->hw, PHY_1000T_STATUS, &phy_status);
4724                 if (!(phy_status & SR_1000T_MS_CONFIG_FAULT)) return;
4725                 e1000_read_phy_reg(&adapter->hw, PHY_1000T_CTRL, &phy_ctrl);
4726                 if (phy_ctrl & CR_1000T_MS_ENABLE) {
4727                         phy_ctrl &= ~CR_1000T_MS_ENABLE;
4728                         e1000_write_phy_reg(&adapter->hw, PHY_1000T_CTRL,
4729                                             phy_ctrl);
4730                         adapter->smartspeed++;
4731                         if (!e1000_phy_setup_autoneg(&adapter->hw) &&
4732                            !e1000_read_phy_reg(&adapter->hw, PHY_CTRL,
4733                                                &phy_ctrl)) {
4734                                 phy_ctrl |= (MII_CR_AUTO_NEG_EN |
4735                                              MII_CR_RESTART_AUTO_NEG);
4736                                 e1000_write_phy_reg(&adapter->hw, PHY_CTRL,
4737                                                     phy_ctrl);
4738                         }
4739                 }
4740                 return;
4741         } else if (adapter->smartspeed == E1000_SMARTSPEED_DOWNSHIFT) {
4742                 /* If still no link, perhaps using 2/3 pair cable */
4743                 e1000_read_phy_reg(&adapter->hw, PHY_1000T_CTRL, &phy_ctrl);
4744                 phy_ctrl |= CR_1000T_MS_ENABLE;
4745                 e1000_write_phy_reg(&adapter->hw, PHY_1000T_CTRL, phy_ctrl);
4746                 if (!e1000_phy_setup_autoneg(&adapter->hw) &&
4747                    !e1000_read_phy_reg(&adapter->hw, PHY_CTRL, &phy_ctrl)) {
4748                         phy_ctrl |= (MII_CR_AUTO_NEG_EN |
4749                                      MII_CR_RESTART_AUTO_NEG);
4750                         e1000_write_phy_reg(&adapter->hw, PHY_CTRL, phy_ctrl);
4751                 }
4752         }
4753         /* Restart process after E1000_SMARTSPEED_MAX iterations */
4754         if (adapter->smartspeed++ == E1000_SMARTSPEED_MAX)
4755                 adapter->smartspeed = 0;
4756 }
4757
4758 /**
4759  * e1000_ioctl -
4760  * @netdev:
4761  * @ifreq:
4762  * @cmd:
4763  **/
4764
4765 static int
4766 e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
4767 {
4768         switch (cmd) {
4769         case SIOCGMIIPHY:
4770         case SIOCGMIIREG:
4771         case SIOCSMIIREG:
4772                 return e1000_mii_ioctl(netdev, ifr, cmd);
4773         default:
4774                 return -EOPNOTSUPP;
4775         }
4776 }
4777
4778 /**
4779  * e1000_mii_ioctl -
4780  * @netdev:
4781  * @ifreq:
4782  * @cmd:
4783  **/
4784
4785 static int
4786 e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
4787 {
4788         struct e1000_adapter *adapter = netdev_priv(netdev);
4789         struct mii_ioctl_data *data = if_mii(ifr);
4790         int retval;
4791         uint16_t mii_reg;
4792         uint16_t spddplx;
4793         unsigned long flags;
4794
4795         if (adapter->hw.media_type != e1000_media_type_copper)
4796                 return -EOPNOTSUPP;
4797
4798         switch (cmd) {
4799         case SIOCGMIIPHY:
4800                 data->phy_id = adapter->hw.phy_addr;
4801                 break;
4802         case SIOCGMIIREG:
4803                 if (!capable(CAP_NET_ADMIN))
4804                         return -EPERM;
4805                 spin_lock_irqsave(&adapter->stats_lock, flags);
4806                 if (e1000_read_phy_reg(&adapter->hw, data->reg_num & 0x1F,
4807                                    &data->val_out)) {
4808                         spin_unlock_irqrestore(&adapter->stats_lock, flags);
4809                         return -EIO;
4810                 }
4811                 spin_unlock_irqrestore(&adapter->stats_lock, flags);
4812                 break;
4813         case SIOCSMIIREG:
4814                 if (!capable(CAP_NET_ADMIN))
4815                         return -EPERM;
4816                 if (data->reg_num & ~(0x1F))
4817                         return -EFAULT;
4818                 mii_reg = data->val_in;
4819                 spin_lock_irqsave(&adapter->stats_lock, flags);
4820                 if (e1000_write_phy_reg(&adapter->hw, data->reg_num,
4821                                         mii_reg)) {
4822                         spin_unlock_irqrestore(&adapter->stats_lock, flags);
4823                         return -EIO;
4824                 }
4825                 if (adapter->hw.media_type == e1000_media_type_copper) {
4826                         switch (data->reg_num) {
4827                         case PHY_CTRL:
4828                                 if (mii_reg & MII_CR_POWER_DOWN)
4829                                         break;
4830                                 if (mii_reg & MII_CR_AUTO_NEG_EN) {
4831                                         adapter->hw.autoneg = 1;
4832                                         adapter->hw.autoneg_advertised = 0x2F;
4833                                 } else {
4834                                         if (mii_reg & 0x40)
4835                                                 spddplx = SPEED_1000;
4836                                         else if (mii_reg & 0x2000)
4837                                                 spddplx = SPEED_100;
4838                                         else
4839                                                 spddplx = SPEED_10;
4840                                         spddplx += (mii_reg & 0x100)
4841                                                    ? DUPLEX_FULL :
4842                                                    DUPLEX_HALF;
4843                                         retval = e1000_set_spd_dplx(adapter,
4844                                                                     spddplx);
4845                                         if (retval) {
4846                                                 spin_unlock_irqrestore(
4847                                                         &adapter->stats_lock,
4848                                                         flags);
4849                                                 return retval;
4850                                         }
4851                                 }
4852                                 if (netif_running(adapter->netdev))
4853                                         e1000_reinit_locked(adapter);
4854                                 else
4855                                         e1000_reset(adapter);
4856                                 break;
4857                         case M88E1000_PHY_SPEC_CTRL:
4858                         case M88E1000_EXT_PHY_SPEC_CTRL:
4859                                 if (e1000_phy_reset(&adapter->hw)) {
4860                                         spin_unlock_irqrestore(
4861                                                 &adapter->stats_lock, flags);
4862                                         return -EIO;
4863                                 }
4864                                 break;
4865                         }
4866                 } else {
4867                         switch (data->reg_num) {
4868                         case PHY_CTRL:
4869                                 if (mii_reg & MII_CR_POWER_DOWN)
4870                                         break;
4871                                 if (netif_running(adapter->netdev))
4872                                         e1000_reinit_locked(adapter);
4873                                 else
4874                                         e1000_reset(adapter);
4875                                 break;
4876                         }
4877                 }
4878                 spin_unlock_irqrestore(&adapter->stats_lock, flags);
4879                 break;
4880         default:
4881                 return -EOPNOTSUPP;
4882         }
4883         return E1000_SUCCESS;
4884 }
4885
4886 void
4887 e1000_pci_set_mwi(struct e1000_hw *hw)
4888 {
4889         struct e1000_adapter *adapter = hw->back;
4890         int ret_val = pci_set_mwi(adapter->pdev);
4891
4892         if (ret_val)
4893                 DPRINTK(PROBE, ERR, "Error in setting MWI\n");
4894 }
4895
4896 void
4897 e1000_pci_clear_mwi(struct e1000_hw *hw)
4898 {
4899         struct e1000_adapter *adapter = hw->back;
4900
4901         pci_clear_mwi(adapter->pdev);
4902 }
4903
4904 void
4905 e1000_read_pci_cfg(struct e1000_hw *hw, uint32_t reg, uint16_t *value)
4906 {
4907         struct e1000_adapter *adapter = hw->back;
4908
4909         pci_read_config_word(adapter->pdev, reg, value);
4910 }
4911
4912 void
4913 e1000_write_pci_cfg(struct e1000_hw *hw, uint32_t reg, uint16_t *value)
4914 {
4915         struct e1000_adapter *adapter = hw->back;
4916
4917         pci_write_config_word(adapter->pdev, reg, *value);
4918 }
4919
4920 int32_t
4921 e1000_read_pcie_cap_reg(struct e1000_hw *hw, uint32_t reg, uint16_t *value)
4922 {
4923     struct e1000_adapter *adapter = hw->back;
4924     uint16_t cap_offset;
4925
4926     cap_offset = pci_find_capability(adapter->pdev, PCI_CAP_ID_EXP);
4927     if (!cap_offset)
4928         return -E1000_ERR_CONFIG;
4929
4930     pci_read_config_word(adapter->pdev, cap_offset + reg, value);
4931
4932     return E1000_SUCCESS;
4933 }
4934
4935 void
4936 e1000_io_write(struct e1000_hw *hw, unsigned long port, uint32_t value)
4937 {
4938         outl(value, port);
4939 }
4940
4941 static void
4942 e1000_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp)
4943 {
4944         struct e1000_adapter *adapter = netdev_priv(netdev);
4945         uint32_t ctrl, rctl;
4946
4947         e1000_irq_disable(adapter);
4948         adapter->vlgrp = grp;
4949
4950         if (grp) {
4951                 /* enable VLAN tag insert/strip */
4952                 ctrl = E1000_READ_REG(&adapter->hw, CTRL);
4953                 ctrl |= E1000_CTRL_VME;
4954                 E1000_WRITE_REG(&adapter->hw, CTRL, ctrl);
4955
4956                 if (adapter->hw.mac_type != e1000_ich8lan) {
4957                         /* enable VLAN receive filtering */
4958                         rctl = E1000_READ_REG(&adapter->hw, RCTL);
4959                         rctl |= E1000_RCTL_VFE;
4960                         rctl &= ~E1000_RCTL_CFIEN;
4961                         E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
4962                         e1000_update_mng_vlan(adapter);
4963                 }
4964         } else {
4965                 /* disable VLAN tag insert/strip */
4966                 ctrl = E1000_READ_REG(&adapter->hw, CTRL);
4967                 ctrl &= ~E1000_CTRL_VME;
4968                 E1000_WRITE_REG(&adapter->hw, CTRL, ctrl);
4969
4970                 if (adapter->hw.mac_type != e1000_ich8lan) {
4971                         /* disable VLAN filtering */
4972                         rctl = E1000_READ_REG(&adapter->hw, RCTL);
4973                         rctl &= ~E1000_RCTL_VFE;
4974                         E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
4975                         if (adapter->mng_vlan_id !=
4976                             (uint16_t)E1000_MNG_VLAN_NONE) {
4977                                 e1000_vlan_rx_kill_vid(netdev,
4978                                                        adapter->mng_vlan_id);
4979                                 adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
4980                         }
4981                 }
4982         }
4983
4984         e1000_irq_enable(adapter);
4985 }
4986
4987 static void
4988 e1000_vlan_rx_add_vid(struct net_device *netdev, uint16_t vid)
4989 {
4990         struct e1000_adapter *adapter = netdev_priv(netdev);
4991         uint32_t vfta, index;
4992
4993         if ((adapter->hw.mng_cookie.status &
4994              E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) &&
4995             (vid == adapter->mng_vlan_id))
4996                 return;
4997         /* add VID to filter table */
4998         index = (vid >> 5) & 0x7F;
4999         vfta = E1000_READ_REG_ARRAY(&adapter->hw, VFTA, index);
5000         vfta |= (1 << (vid & 0x1F));
5001         e1000_write_vfta(&adapter->hw, index, vfta);
5002 }
5003
5004 static void
5005 e1000_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid)
5006 {
5007         struct e1000_adapter *adapter = netdev_priv(netdev);
5008         uint32_t vfta, index;
5009
5010         e1000_irq_disable(adapter);
5011         vlan_group_set_device(adapter->vlgrp, vid, NULL);
5012         e1000_irq_enable(adapter);
5013
5014         if ((adapter->hw.mng_cookie.status &
5015              E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) &&
5016             (vid == adapter->mng_vlan_id)) {
5017                 /* release control to f/w */
5018                 e1000_release_hw_control(adapter);
5019                 return;
5020         }
5021
5022         /* remove VID from filter table */
5023         index = (vid >> 5) & 0x7F;
5024         vfta = E1000_READ_REG_ARRAY(&adapter->hw, VFTA, index);
5025         vfta &= ~(1 << (vid & 0x1F));
5026         e1000_write_vfta(&adapter->hw, index, vfta);
5027 }
5028
5029 static void
5030 e1000_restore_vlan(struct e1000_adapter *adapter)
5031 {
5032         e1000_vlan_rx_register(adapter->netdev, adapter->vlgrp);
5033
5034         if (adapter->vlgrp) {
5035                 uint16_t vid;
5036                 for (vid = 0; vid < VLAN_GROUP_ARRAY_LEN; vid++) {
5037                         if (!vlan_group_get_device(adapter->vlgrp, vid))
5038                                 continue;
5039                         e1000_vlan_rx_add_vid(adapter->netdev, vid);
5040                 }
5041         }
5042 }
5043
5044 int
5045 e1000_set_spd_dplx(struct e1000_adapter *adapter, uint16_t spddplx)
5046 {
5047         adapter->hw.autoneg = 0;
5048
5049         /* Fiber NICs only allow 1000 gbps Full duplex */
5050         if ((adapter->hw.media_type == e1000_media_type_fiber) &&
5051                 spddplx != (SPEED_1000 + DUPLEX_FULL)) {
5052                 DPRINTK(PROBE, ERR, "Unsupported Speed/Duplex configuration\n");
5053                 return -EINVAL;
5054         }
5055
5056         switch (spddplx) {
5057         case SPEED_10 + DUPLEX_HALF:
5058                 adapter->hw.forced_speed_duplex = e1000_10_half;
5059                 break;
5060         case SPEED_10 + DUPLEX_FULL:
5061                 adapter->hw.forced_speed_duplex = e1000_10_full;
5062                 break;
5063         case SPEED_100 + DUPLEX_HALF:
5064                 adapter->hw.forced_speed_duplex = e1000_100_half;
5065                 break;
5066         case SPEED_100 + DUPLEX_FULL:
5067                 adapter->hw.forced_speed_duplex = e1000_100_full;
5068                 break;
5069         case SPEED_1000 + DUPLEX_FULL:
5070                 adapter->hw.autoneg = 1;
5071                 adapter->hw.autoneg_advertised = ADVERTISE_1000_FULL;
5072                 break;
5073         case SPEED_1000 + DUPLEX_HALF: /* not supported */
5074         default:
5075                 DPRINTK(PROBE, ERR, "Unsupported Speed/Duplex configuration\n");
5076                 return -EINVAL;
5077         }
5078         return 0;
5079 }
5080
5081 static int
5082 e1000_suspend(struct pci_dev *pdev, pm_message_t state)
5083 {
5084         struct net_device *netdev = pci_get_drvdata(pdev);
5085         struct e1000_adapter *adapter = netdev_priv(netdev);
5086         uint32_t ctrl, ctrl_ext, rctl, status;
5087         uint32_t wufc = adapter->wol;
5088 #ifdef CONFIG_PM
5089         int retval = 0;
5090 #endif
5091
5092         netif_device_detach(netdev);
5093
5094         if (netif_running(netdev)) {
5095                 WARN_ON(test_bit(__E1000_RESETTING, &adapter->flags));
5096                 e1000_down(adapter);
5097         }
5098
5099 #ifdef CONFIG_PM
5100         retval = pci_save_state(pdev);
5101         if (retval)
5102                 return retval;
5103 #endif
5104
5105         status = E1000_READ_REG(&adapter->hw, STATUS);
5106         if (status & E1000_STATUS_LU)
5107                 wufc &= ~E1000_WUFC_LNKC;
5108
5109         if (wufc) {
5110                 e1000_setup_rctl(adapter);
5111                 e1000_set_multi(netdev);
5112
5113                 /* turn on all-multi mode if wake on multicast is enabled */
5114                 if (wufc & E1000_WUFC_MC) {
5115                         rctl = E1000_READ_REG(&adapter->hw, RCTL);
5116                         rctl |= E1000_RCTL_MPE;
5117                         E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
5118                 }
5119
5120                 if (adapter->hw.mac_type >= e1000_82540) {
5121                         ctrl = E1000_READ_REG(&adapter->hw, CTRL);
5122                         /* advertise wake from D3Cold */
5123                         #define E1000_CTRL_ADVD3WUC 0x00100000
5124                         /* phy power management enable */
5125                         #define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000
5126                         ctrl |= E1000_CTRL_ADVD3WUC |
5127                                 E1000_CTRL_EN_PHY_PWR_MGMT;
5128                         E1000_WRITE_REG(&adapter->hw, CTRL, ctrl);
5129                 }
5130
5131                 if (adapter->hw.media_type == e1000_media_type_fiber ||
5132                    adapter->hw.media_type == e1000_media_type_internal_serdes) {
5133                         /* keep the laser running in D3 */
5134                         ctrl_ext = E1000_READ_REG(&adapter->hw, CTRL_EXT);
5135                         ctrl_ext |= E1000_CTRL_EXT_SDP7_DATA;
5136                         E1000_WRITE_REG(&adapter->hw, CTRL_EXT, ctrl_ext);
5137                 }
5138
5139                 /* Allow time for pending master requests to run */
5140                 e1000_disable_pciex_master(&adapter->hw);
5141
5142                 E1000_WRITE_REG(&adapter->hw, WUC, E1000_WUC_PME_EN);
5143                 E1000_WRITE_REG(&adapter->hw, WUFC, wufc);
5144                 pci_enable_wake(pdev, PCI_D3hot, 1);
5145                 pci_enable_wake(pdev, PCI_D3cold, 1);
5146         } else {
5147                 E1000_WRITE_REG(&adapter->hw, WUC, 0);
5148                 E1000_WRITE_REG(&adapter->hw, WUFC, 0);
5149                 pci_enable_wake(pdev, PCI_D3hot, 0);
5150                 pci_enable_wake(pdev, PCI_D3cold, 0);
5151         }
5152
5153         e1000_release_manageability(adapter);
5154
5155         /* make sure adapter isn't asleep if manageability is enabled */
5156         if (adapter->en_mng_pt) {
5157                 pci_enable_wake(pdev, PCI_D3hot, 1);
5158                 pci_enable_wake(pdev, PCI_D3cold, 1);
5159         }
5160
5161         if (adapter->hw.phy_type == e1000_phy_igp_3)
5162                 e1000_phy_powerdown_workaround(&adapter->hw);
5163
5164         if (netif_running(netdev))
5165                 e1000_free_irq(adapter);
5166
5167         /* Release control of h/w to f/w.  If f/w is AMT enabled, this
5168          * would have already happened in close and is redundant. */
5169         e1000_release_hw_control(adapter);
5170
5171         pci_disable_device(pdev);
5172
5173         pci_set_power_state(pdev, pci_choose_state(pdev, state));
5174
5175         return 0;
5176 }
5177
5178 #ifdef CONFIG_PM
5179 static int
5180 e1000_resume(struct pci_dev *pdev)
5181 {
5182         struct net_device *netdev = pci_get_drvdata(pdev);
5183         struct e1000_adapter *adapter = netdev_priv(netdev);
5184         uint32_t err;
5185
5186         pci_set_power_state(pdev, PCI_D0);
5187         pci_restore_state(pdev);
5188         if ((err = pci_enable_device(pdev))) {
5189                 printk(KERN_ERR "e1000: Cannot enable PCI device from suspend\n");
5190                 return err;
5191         }
5192         pci_set_master(pdev);
5193
5194         pci_enable_wake(pdev, PCI_D3hot, 0);
5195         pci_enable_wake(pdev, PCI_D3cold, 0);
5196
5197         if (netif_running(netdev) && (err = e1000_request_irq(adapter)))
5198                 return err;
5199
5200         e1000_power_up_phy(adapter);
5201         e1000_reset(adapter);
5202         E1000_WRITE_REG(&adapter->hw, WUS, ~0);
5203
5204         e1000_init_manageability(adapter);
5205
5206         if (netif_running(netdev))
5207                 e1000_up(adapter);
5208
5209         netif_device_attach(netdev);
5210
5211         /* If the controller is 82573 and f/w is AMT, do not set
5212          * DRV_LOAD until the interface is up.  For all other cases,
5213          * let the f/w know that the h/w is now under the control
5214          * of the driver. */
5215         if (adapter->hw.mac_type != e1000_82573 ||
5216             !e1000_check_mng_mode(&adapter->hw))
5217                 e1000_get_hw_control(adapter);
5218
5219         return 0;
5220 }
5221 #endif
5222
5223 static void e1000_shutdown(struct pci_dev *pdev)
5224 {
5225         e1000_suspend(pdev, PMSG_SUSPEND);
5226 }
5227
5228 #ifdef CONFIG_NET_POLL_CONTROLLER
5229 /*
5230  * Polling 'interrupt' - used by things like netconsole to send skbs
5231  * without having to re-enable interrupts. It's not called while
5232  * the interrupt routine is executing.
5233  */
5234 static void
5235 e1000_netpoll(struct net_device *netdev)
5236 {
5237         struct e1000_adapter *adapter = netdev_priv(netdev);
5238
5239         disable_irq(adapter->pdev->irq);
5240         e1000_intr(adapter->pdev->irq, netdev);
5241         e1000_clean_tx_irq(adapter, adapter->tx_ring);
5242 #ifndef CONFIG_E1000_NAPI
5243         adapter->clean_rx(adapter, adapter->rx_ring);
5244 #endif
5245         enable_irq(adapter->pdev->irq);
5246 }
5247 #endif
5248
5249 /**
5250  * e1000_io_error_detected - called when PCI error is detected
5251  * @pdev: Pointer to PCI device
5252  * @state: The current pci conneection state
5253  *
5254  * This function is called after a PCI bus error affecting
5255  * this device has been detected.
5256  */
5257 static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
5258 {
5259         struct net_device *netdev = pci_get_drvdata(pdev);
5260         struct e1000_adapter *adapter = netdev->priv;
5261
5262         netif_device_detach(netdev);
5263
5264         if (netif_running(netdev))
5265                 e1000_down(adapter);
5266         pci_disable_device(pdev);
5267
5268         /* Request a slot slot reset. */
5269         return PCI_ERS_RESULT_NEED_RESET;
5270 }
5271
5272 /**
5273  * e1000_io_slot_reset - called after the pci bus has been reset.
5274  * @pdev: Pointer to PCI device
5275  *
5276  * Restart the card from scratch, as if from a cold-boot. Implementation
5277  * resembles the first-half of the e1000_resume routine.
5278  */
5279 static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev)
5280 {
5281         struct net_device *netdev = pci_get_drvdata(pdev);
5282         struct e1000_adapter *adapter = netdev->priv;
5283
5284         if (pci_enable_device(pdev)) {
5285                 printk(KERN_ERR "e1000: Cannot re-enable PCI device after reset.\n");
5286                 return PCI_ERS_RESULT_DISCONNECT;
5287         }
5288         pci_set_master(pdev);
5289
5290         pci_enable_wake(pdev, PCI_D3hot, 0);
5291         pci_enable_wake(pdev, PCI_D3cold, 0);
5292
5293         e1000_reset(adapter);
5294         E1000_WRITE_REG(&adapter->hw, WUS, ~0);
5295
5296         return PCI_ERS_RESULT_RECOVERED;
5297 }
5298
5299 /**
5300  * e1000_io_resume - called when traffic can start flowing again.
5301  * @pdev: Pointer to PCI device
5302  *
5303  * This callback is called when the error recovery driver tells us that
5304  * its OK to resume normal operation. Implementation resembles the
5305  * second-half of the e1000_resume routine.
5306  */
5307 static void e1000_io_resume(struct pci_dev *pdev)
5308 {
5309         struct net_device *netdev = pci_get_drvdata(pdev);
5310         struct e1000_adapter *adapter = netdev->priv;
5311
5312         e1000_init_manageability(adapter);
5313
5314         if (netif_running(netdev)) {
5315                 if (e1000_up(adapter)) {
5316                         printk("e1000: can't bring device back up after reset\n");
5317                         return;
5318                 }
5319         }
5320
5321         netif_device_attach(netdev);
5322
5323         /* If the controller is 82573 and f/w is AMT, do not set
5324          * DRV_LOAD until the interface is up.  For all other cases,
5325          * let the f/w know that the h/w is now under the control
5326          * of the driver. */
5327         if (adapter->hw.mac_type != e1000_82573 ||
5328             !e1000_check_mng_mode(&adapter->hw))
5329                 e1000_get_hw_control(adapter);
5330
5331 }
5332
5333 /* e1000_main.c */