Merge master.kernel.org:/pub/scm/linux/kernel/git/acme/net-2.6
[pandora-kernel.git] / drivers / net / arm / etherh.c
1 /*
2  *  linux/drivers/acorn/net/etherh.c
3  *
4  *  Copyright (C) 2000-2002 Russell King
5  *
6  * This program is free software; you can redistribute it and/or modify
7  * it under the terms of the GNU General Public License version 2 as
8  * published by the Free Software Foundation.
9  *
10  * NS8390 I-cubed EtherH and ANT EtherM specific driver
11  * Thanks to I-Cubed for information on their cards.
12  * EtherM conversion (C) 1999 Chris Kemp and Tim Watterton
13  * EtherM integration (C) 2000 Aleph One Ltd (Tak-Shing Chan)
14  * EtherM integration re-engineered by Russell King.
15  *
16  * Changelog:
17  *  08-12-1996  RMK     1.00    Created
18  *              RMK     1.03    Added support for EtherLan500 cards
19  *  23-11-1997  RMK     1.04    Added media autodetection
20  *  16-04-1998  RMK     1.05    Improved media autodetection
21  *  10-02-2000  RMK     1.06    Updated for 2.3.43
22  *  13-05-2000  RMK     1.07    Updated for 2.3.99-pre8
23  *  12-10-1999  CK/TEW          EtherM driver first release
24  *  21-12-2000  TTC             EtherH/EtherM integration
25  *  25-12-2000  RMK     1.08    Clean integration of EtherM into this driver.
26  *  03-01-2002  RMK     1.09    Always enable IRQs if we're in the nic slot.
27  */
28
29 #include <linux/module.h>
30 #include <linux/kernel.h>
31 #include <linux/sched.h>
32 #include <linux/types.h>
33 #include <linux/fcntl.h>
34 #include <linux/interrupt.h>
35 #include <linux/ptrace.h>
36 #include <linux/ioport.h>
37 #include <linux/in.h>
38 #include <linux/slab.h>
39 #include <linux/string.h>
40 #include <linux/errno.h>
41 #include <linux/netdevice.h>
42 #include <linux/etherdevice.h>
43 #include <linux/ethtool.h>
44 #include <linux/skbuff.h>
45 #include <linux/delay.h>
46 #include <linux/device.h>
47 #include <linux/init.h>
48 #include <linux/bitops.h>
49 #include <linux/jiffies.h>
50
51 #include <asm/system.h>
52 #include <asm/ecard.h>
53 #include <asm/io.h>
54
55 #include "../8390.h"
56
57 #define NET_DEBUG  0
58 #define DEBUG_INIT 2
59
60 #define DRV_NAME        "etherh"
61 #define DRV_VERSION     "1.11"
62
63 static unsigned int net_debug = NET_DEBUG;
64
65 struct etherh_priv {
66         void __iomem    *ioc_fast;
67         void __iomem    *memc;
68         void __iomem    *dma_base;
69         unsigned int    id;
70         void __iomem    *ctrl_port;
71         unsigned char   ctrl;
72         u32             supported;
73 };
74
75 struct etherh_data {
76         unsigned long   ns8390_offset;
77         unsigned long   dataport_offset;
78         unsigned long   ctrlport_offset;
79         int             ctrl_ioc;
80         const char      name[16];
81         u32             supported;
82         unsigned char   tx_start_page;
83         unsigned char   stop_page;
84 };
85
86 MODULE_AUTHOR("Russell King");
87 MODULE_DESCRIPTION("EtherH/EtherM driver");
88 MODULE_LICENSE("GPL");
89
90 static char version[] __initdata =
91         "EtherH/EtherM Driver (c) 2002-2004 Russell King " DRV_VERSION "\n";
92
93 #define ETHERH500_DATAPORT      0x800   /* MEMC */
94 #define ETHERH500_NS8390        0x000   /* MEMC */
95 #define ETHERH500_CTRLPORT      0x800   /* IOC  */
96
97 #define ETHERH600_DATAPORT      0x040   /* MEMC */
98 #define ETHERH600_NS8390        0x800   /* MEMC */
99 #define ETHERH600_CTRLPORT      0x200   /* MEMC */
100
101 #define ETHERH_CP_IE            1
102 #define ETHERH_CP_IF            2
103 #define ETHERH_CP_HEARTBEAT     2
104
105 #define ETHERH_TX_START_PAGE    1
106 #define ETHERH_STOP_PAGE        127
107
108 /*
109  * These came from CK/TEW
110  */
111 #define ETHERM_DATAPORT         0x200   /* MEMC */
112 #define ETHERM_NS8390           0x800   /* MEMC */
113 #define ETHERM_CTRLPORT         0x23c   /* MEMC */
114
115 #define ETHERM_TX_START_PAGE    64
116 #define ETHERM_STOP_PAGE        127
117
118 /* ------------------------------------------------------------------------ */
119
120 #define etherh_priv(dev) \
121  ((struct etherh_priv *)(((char *)netdev_priv(dev)) + sizeof(struct ei_device)))
122
123 static inline void etherh_set_ctrl(struct etherh_priv *eh, unsigned char mask)
124 {
125         unsigned char ctrl = eh->ctrl | mask;
126         eh->ctrl = ctrl;
127         writeb(ctrl, eh->ctrl_port);
128 }
129
130 static inline void etherh_clr_ctrl(struct etherh_priv *eh, unsigned char mask)
131 {
132         unsigned char ctrl = eh->ctrl & ~mask;
133         eh->ctrl = ctrl;
134         writeb(ctrl, eh->ctrl_port);
135 }
136
137 static inline unsigned int etherh_get_stat(struct etherh_priv *eh)
138 {
139         return readb(eh->ctrl_port);
140 }
141
142
143
144
145 static void etherh_irq_enable(ecard_t *ec, int irqnr)
146 {
147         struct etherh_priv *eh = ec->irq_data;
148
149         etherh_set_ctrl(eh, ETHERH_CP_IE);
150 }
151
152 static void etherh_irq_disable(ecard_t *ec, int irqnr)
153 {
154         struct etherh_priv *eh = ec->irq_data;
155
156         etherh_clr_ctrl(eh, ETHERH_CP_IE);
157 }
158
159 static expansioncard_ops_t etherh_ops = {
160         .irqenable      = etherh_irq_enable,
161         .irqdisable     = etherh_irq_disable,
162 };
163
164
165
166
167 static void
168 etherh_setif(struct net_device *dev)
169 {
170         struct ei_device *ei_local = netdev_priv(dev);
171         unsigned long flags;
172         void __iomem *addr;
173
174         local_irq_save(flags);
175
176         /* set the interface type */
177         switch (etherh_priv(dev)->id) {
178         case PROD_I3_ETHERLAN600:
179         case PROD_I3_ETHERLAN600A:
180                 addr = (void *)dev->base_addr + EN0_RCNTHI;
181
182                 switch (dev->if_port) {
183                 case IF_PORT_10BASE2:
184                         writeb((readb(addr) & 0xf8) | 1, addr);
185                         break;
186                 case IF_PORT_10BASET:
187                         writeb((readb(addr) & 0xf8), addr);
188                         break;
189                 }
190                 break;
191
192         case PROD_I3_ETHERLAN500:
193                 switch (dev->if_port) {
194                 case IF_PORT_10BASE2:
195                         etherh_clr_ctrl(etherh_priv(dev), ETHERH_CP_IF);
196                         break;
197
198                 case IF_PORT_10BASET:
199                         etherh_set_ctrl(etherh_priv(dev), ETHERH_CP_IF);
200                         break;
201                 }
202                 break;
203
204         default:
205                 break;
206         }
207
208         local_irq_restore(flags);
209 }
210
211 static int
212 etherh_getifstat(struct net_device *dev)
213 {
214         struct ei_device *ei_local = netdev_priv(dev);
215         void __iomem *addr;
216         int stat = 0;
217
218         switch (etherh_priv(dev)->id) {
219         case PROD_I3_ETHERLAN600:
220         case PROD_I3_ETHERLAN600A:
221                 addr = (void *)dev->base_addr + EN0_RCNTHI;
222                 switch (dev->if_port) {
223                 case IF_PORT_10BASE2:
224                         stat = 1;
225                         break;
226                 case IF_PORT_10BASET:
227                         stat = readb(addr) & 4;
228                         break;
229                 }
230                 break;
231
232         case PROD_I3_ETHERLAN500:
233                 switch (dev->if_port) {
234                 case IF_PORT_10BASE2:
235                         stat = 1;
236                         break;
237                 case IF_PORT_10BASET:
238                         stat = etherh_get_stat(etherh_priv(dev)) & ETHERH_CP_HEARTBEAT;
239                         break;
240                 }
241                 break;
242
243         default:
244                 stat = 0;
245                 break;
246         }
247
248         return stat != 0;
249 }
250
251 /*
252  * Configure the interface.  Note that we ignore the other
253  * parts of ifmap, since its mostly meaningless for this driver.
254  */
255 static int etherh_set_config(struct net_device *dev, struct ifmap *map)
256 {
257         switch (map->port) {
258         case IF_PORT_10BASE2:
259         case IF_PORT_10BASET:
260                 /*
261                  * If the user explicitly sets the interface
262                  * media type, turn off automedia detection.
263                  */
264                 dev->flags &= ~IFF_AUTOMEDIA;
265                 dev->if_port = map->port;
266                 break;
267
268         default:
269                 return -EINVAL;
270         }
271
272         etherh_setif(dev);
273
274         return 0;
275 }
276
277 /*
278  * Reset the 8390 (hard reset).  Note that we can't actually do this.
279  */
280 static void
281 etherh_reset(struct net_device *dev)
282 {
283         struct ei_device *ei_local = netdev_priv(dev);
284         void __iomem *addr = (void *)dev->base_addr;
285
286         writeb(E8390_NODMA+E8390_PAGE0+E8390_STOP, addr);
287
288         /*
289          * See if we need to change the interface type.
290          * Note that we use 'interface_num' as a flag
291          * to indicate that we need to change the media.
292          */
293         if (dev->flags & IFF_AUTOMEDIA && ei_local->interface_num) {
294                 ei_local->interface_num = 0;
295
296                 if (dev->if_port == IF_PORT_10BASET)
297                         dev->if_port = IF_PORT_10BASE2;
298                 else
299                         dev->if_port = IF_PORT_10BASET;
300
301                 etherh_setif(dev);
302         }
303 }
304
305 /*
306  * Write a block of data out to the 8390
307  */
308 static void
309 etherh_block_output (struct net_device *dev, int count, const unsigned char *buf, int start_page)
310 {
311         struct ei_device *ei_local = netdev_priv(dev);
312         unsigned long dma_start;
313         void __iomem *dma_base, *addr;
314
315         if (ei_local->dmaing) {
316                 printk(KERN_ERR "%s: DMAing conflict in etherh_block_input: "
317                         " DMAstat %d irqlock %d\n", dev->name,
318                         ei_local->dmaing, ei_local->irqlock);
319                 return;
320         }
321
322         /*
323          * Make sure we have a round number of bytes if we're in word mode.
324          */
325         if (count & 1 && ei_local->word16)
326                 count++;
327
328         ei_local->dmaing = 1;
329
330         addr = (void *)dev->base_addr;
331         dma_base = etherh_priv(dev)->dma_base;
332
333         count = (count + 1) & ~1;
334         writeb (E8390_NODMA | E8390_PAGE0 | E8390_START, addr + E8390_CMD);
335
336         writeb (0x42, addr + EN0_RCNTLO);
337         writeb (0x00, addr + EN0_RCNTHI);
338         writeb (0x42, addr + EN0_RSARLO);
339         writeb (0x00, addr + EN0_RSARHI);
340         writeb (E8390_RREAD | E8390_START, addr + E8390_CMD);
341
342         udelay (1);
343
344         writeb (ENISR_RDC, addr + EN0_ISR);
345         writeb (count, addr + EN0_RCNTLO);
346         writeb (count >> 8, addr + EN0_RCNTHI);
347         writeb (0, addr + EN0_RSARLO);
348         writeb (start_page, addr + EN0_RSARHI);
349         writeb (E8390_RWRITE | E8390_START, addr + E8390_CMD);
350
351         if (ei_local->word16)
352                 writesw (dma_base, buf, count >> 1);
353         else
354                 writesb (dma_base, buf, count);
355
356         dma_start = jiffies;
357
358         while ((readb (addr + EN0_ISR) & ENISR_RDC) == 0)
359                 if (time_after(jiffies, dma_start + 2*HZ/100)) { /* 20ms */
360                         printk(KERN_ERR "%s: timeout waiting for TX RDC\n",
361                                 dev->name);
362                         etherh_reset (dev);
363                         NS8390_init (dev, 1);
364                         break;
365                 }
366
367         writeb (ENISR_RDC, addr + EN0_ISR);
368         ei_local->dmaing = 0;
369 }
370
371 /*
372  * Read a block of data from the 8390
373  */
374 static void
375 etherh_block_input (struct net_device *dev, int count, struct sk_buff *skb, int ring_offset)
376 {
377         struct ei_device *ei_local = netdev_priv(dev);
378         unsigned char *buf;
379         void __iomem *dma_base, *addr;
380
381         if (ei_local->dmaing) {
382                 printk(KERN_ERR "%s: DMAing conflict in etherh_block_input: "
383                         " DMAstat %d irqlock %d\n", dev->name,
384                         ei_local->dmaing, ei_local->irqlock);
385                 return;
386         }
387
388         ei_local->dmaing = 1;
389
390         addr = (void *)dev->base_addr;
391         dma_base = etherh_priv(dev)->dma_base;
392
393         buf = skb->data;
394         writeb (E8390_NODMA | E8390_PAGE0 | E8390_START, addr + E8390_CMD);
395         writeb (count, addr + EN0_RCNTLO);
396         writeb (count >> 8, addr + EN0_RCNTHI);
397         writeb (ring_offset, addr + EN0_RSARLO);
398         writeb (ring_offset >> 8, addr + EN0_RSARHI);
399         writeb (E8390_RREAD | E8390_START, addr + E8390_CMD);
400
401         if (ei_local->word16) {
402                 readsw (dma_base, buf, count >> 1);
403                 if (count & 1)
404                         buf[count - 1] = readb (dma_base);
405         } else
406                 readsb (dma_base, buf, count);
407
408         writeb (ENISR_RDC, addr + EN0_ISR);
409         ei_local->dmaing = 0;
410 }
411
412 /*
413  * Read a header from the 8390
414  */
415 static void
416 etherh_get_header (struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page)
417 {
418         struct ei_device *ei_local = netdev_priv(dev);
419         void __iomem *dma_base, *addr;
420
421         if (ei_local->dmaing) {
422                 printk(KERN_ERR "%s: DMAing conflict in etherh_get_header: "
423                         " DMAstat %d irqlock %d\n", dev->name,
424                         ei_local->dmaing, ei_local->irqlock);
425                 return;
426         }
427
428         ei_local->dmaing = 1;
429
430         addr = (void *)dev->base_addr;
431         dma_base = etherh_priv(dev)->dma_base;
432
433         writeb (E8390_NODMA | E8390_PAGE0 | E8390_START, addr + E8390_CMD);
434         writeb (sizeof (*hdr), addr + EN0_RCNTLO);
435         writeb (0, addr + EN0_RCNTHI);
436         writeb (0, addr + EN0_RSARLO);
437         writeb (ring_page, addr + EN0_RSARHI);
438         writeb (E8390_RREAD | E8390_START, addr + E8390_CMD);
439
440         if (ei_local->word16)
441                 readsw (dma_base, hdr, sizeof (*hdr) >> 1);
442         else
443                 readsb (dma_base, hdr, sizeof (*hdr));
444
445         writeb (ENISR_RDC, addr + EN0_ISR);
446         ei_local->dmaing = 0;
447 }
448
449 /*
450  * Open/initialize the board.  This is called (in the current kernel)
451  * sometime after booting when the 'ifconfig' program is run.
452  *
453  * This routine should set everything up anew at each open, even
454  * registers that "should" only need to be set once at boot, so that
455  * there is non-reboot way to recover if something goes wrong.
456  */
457 static int
458 etherh_open(struct net_device *dev)
459 {
460         struct ei_device *ei_local = netdev_priv(dev);
461
462         if (!is_valid_ether_addr(dev->dev_addr)) {
463                 printk(KERN_WARNING "%s: invalid ethernet MAC address\n",
464                         dev->name);
465                 return -EINVAL;
466         }
467
468         if (request_irq(dev->irq, ei_interrupt, 0, dev->name, dev))
469                 return -EAGAIN;
470
471         /*
472          * Make sure that we aren't going to change the
473          * media type on the next reset - we are about to
474          * do automedia manually now.
475          */
476         ei_local->interface_num = 0;
477
478         /*
479          * If we are doing automedia detection, do it now.
480          * This is more reliable than the 8390's detection.
481          */
482         if (dev->flags & IFF_AUTOMEDIA) {
483                 dev->if_port = IF_PORT_10BASET;
484                 etherh_setif(dev);
485                 mdelay(1);
486                 if (!etherh_getifstat(dev)) {
487                         dev->if_port = IF_PORT_10BASE2;
488                         etherh_setif(dev);
489                 }
490         } else
491                 etherh_setif(dev);
492
493         etherh_reset(dev);
494         ei_open(dev);
495
496         return 0;
497 }
498
499 /*
500  * The inverse routine to etherh_open().
501  */
502 static int
503 etherh_close(struct net_device *dev)
504 {
505         ei_close (dev);
506         free_irq (dev->irq, dev);
507         return 0;
508 }
509
510 /*
511  * Initialisation
512  */
513
514 static void __init etherh_banner(void)
515 {
516         static int version_printed;
517
518         if (net_debug && version_printed++ == 0)
519                 printk(KERN_INFO "%s", version);
520 }
521
522 /*
523  * Read the ethernet address string from the on board rom.
524  * This is an ascii string...
525  */
526 static int __init etherh_addr(char *addr, struct expansion_card *ec)
527 {
528         struct in_chunk_dir cd;
529         char *s;
530         
531         if (!ecard_readchunk(&cd, ec, 0xf5, 0)) {
532                 printk(KERN_ERR "%s: unable to read podule description string\n",
533                        ec->dev.bus_id);
534                 goto no_addr;
535         }
536
537         s = strchr(cd.d.string, '(');
538         if (s) {
539                 int i;
540
541                 for (i = 0; i < 6; i++) {
542                         addr[i] = simple_strtoul(s + 1, &s, 0x10);
543                         if (*s != (i == 5? ')' : ':'))
544                                 break;
545                 }
546
547                 if (i == 6)
548                         return 0;
549         }
550
551         printk(KERN_ERR "%s: unable to parse MAC address: %s\n",
552                ec->dev.bus_id, cd.d.string);
553
554  no_addr:
555         return -ENODEV;
556 }
557
558 /*
559  * Create an ethernet address from the system serial number.
560  */
561 static int __init etherm_addr(char *addr)
562 {
563         unsigned int serial;
564
565         if (system_serial_low == 0 && system_serial_high == 0)
566                 return -ENODEV;
567
568         serial = system_serial_low | system_serial_high;
569
570         addr[0] = 0;
571         addr[1] = 0;
572         addr[2] = 0xa4;
573         addr[3] = 0x10 + (serial >> 24);
574         addr[4] = serial >> 16;
575         addr[5] = serial >> 8;
576         return 0;
577 }
578
579 static void etherh_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
580 {
581         strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
582         strlcpy(info->version, DRV_VERSION, sizeof(info->version));
583         strlcpy(info->bus_info, dev->class_dev.dev->bus_id,
584                 sizeof(info->bus_info));
585 }
586
587 static int etherh_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
588 {
589         cmd->supported  = etherh_priv(dev)->supported;
590         cmd->speed      = SPEED_10;
591         cmd->duplex     = DUPLEX_HALF;
592         cmd->port       = dev->if_port == IF_PORT_10BASET ? PORT_TP : PORT_BNC;
593         cmd->autoneg    = dev->flags & IFF_AUTOMEDIA ? AUTONEG_ENABLE : AUTONEG_DISABLE;
594         return 0;
595 }
596
597 static int etherh_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
598 {
599         switch (cmd->autoneg) {
600         case AUTONEG_ENABLE:
601                 dev->flags |= IFF_AUTOMEDIA;
602                 break;
603
604         case AUTONEG_DISABLE:
605                 switch (cmd->port) {
606                 case PORT_TP:
607                         dev->if_port = IF_PORT_10BASET;
608                         break;
609
610                 case PORT_BNC:
611                         dev->if_port = IF_PORT_10BASE2;
612                         break;
613
614                 default:
615                         return -EINVAL;
616                 }
617                 dev->flags &= ~IFF_AUTOMEDIA;
618                 break;
619
620         default:
621                 return -EINVAL;
622         }
623
624         etherh_setif(dev);
625
626         return 0;
627 }
628
629 static const struct ethtool_ops etherh_ethtool_ops = {
630         .get_settings   = etherh_get_settings,
631         .set_settings   = etherh_set_settings,
632         .get_drvinfo    = etherh_get_drvinfo,
633 };
634
635 static u32 etherh_regoffsets[16];
636 static u32 etherm_regoffsets[16];
637
638 static int __init
639 etherh_probe(struct expansion_card *ec, const struct ecard_id *id)
640 {
641         const struct etherh_data *data = id->data;
642         struct ei_device *ei_local;
643         struct net_device *dev;
644         struct etherh_priv *eh;
645         int i, ret;
646
647         etherh_banner();
648
649         ret = ecard_request_resources(ec);
650         if (ret)
651                 goto out;
652
653         dev = __alloc_ei_netdev(sizeof(struct etherh_priv));
654         if (!dev) {
655                 ret = -ENOMEM;
656                 goto release;
657         }
658
659         SET_MODULE_OWNER(dev);
660         SET_NETDEV_DEV(dev, &ec->dev);
661
662         dev->open               = etherh_open;
663         dev->stop               = etherh_close;
664         dev->set_config         = etherh_set_config;
665         dev->irq                = ec->irq;
666         dev->ethtool_ops        = &etherh_ethtool_ops;
667
668         if (data->supported & SUPPORTED_Autoneg)
669                 dev->flags |= IFF_AUTOMEDIA;
670         if (data->supported & SUPPORTED_TP) {
671                 dev->flags |= IFF_PORTSEL;
672                 dev->if_port = IF_PORT_10BASET;
673         } else if (data->supported & SUPPORTED_BNC) {
674                 dev->flags |= IFF_PORTSEL;
675                 dev->if_port = IF_PORT_10BASE2;
676         } else
677                 dev->if_port = IF_PORT_UNKNOWN;
678
679         eh = etherh_priv(dev);
680         eh->supported           = data->supported;
681         eh->ctrl                = 0;
682         eh->id                  = ec->cid.product;
683         eh->memc                = ioremap(ecard_resource_start(ec, ECARD_RES_MEMC), PAGE_SIZE);
684         if (!eh->memc) {
685                 ret = -ENOMEM;
686                 goto free;
687         }
688
689         eh->ctrl_port = eh->memc;
690         if (data->ctrl_ioc) {
691                 eh->ioc_fast = ioremap(ecard_resource_start(ec, ECARD_RES_IOCFAST), PAGE_SIZE);
692                 if (!eh->ioc_fast) {
693                         ret = -ENOMEM;
694                         goto free;
695                 }
696                 eh->ctrl_port = eh->ioc_fast;
697         }
698
699         dev->base_addr = (unsigned long)eh->memc + data->ns8390_offset;
700         eh->dma_base = eh->memc + data->dataport_offset;
701         eh->ctrl_port += data->ctrlport_offset;
702
703         /*
704          * IRQ and control port handling - only for non-NIC slot cards.
705          */
706         if (ec->slot_no != 8) {
707                 ec->ops         = &etherh_ops;
708                 ec->irq_data    = eh;
709         } else {
710                 /*
711                  * If we're in the NIC slot, make sure the IRQ is enabled
712                  */
713                 etherh_set_ctrl(eh, ETHERH_CP_IE);
714         }
715
716         ei_local = netdev_priv(dev);
717         spin_lock_init(&ei_local->page_lock);
718
719         if (ec->cid.product == PROD_ANT_ETHERM) {
720                 etherm_addr(dev->dev_addr);
721                 ei_local->reg_offset = etherm_regoffsets;
722         } else {
723                 etherh_addr(dev->dev_addr, ec);
724                 ei_local->reg_offset = etherh_regoffsets;
725         }
726
727         ei_local->name          = dev->name;
728         ei_local->word16        = 1;
729         ei_local->tx_start_page = data->tx_start_page;
730         ei_local->rx_start_page = ei_local->tx_start_page + TX_PAGES;
731         ei_local->stop_page     = data->stop_page;
732         ei_local->reset_8390    = etherh_reset;
733         ei_local->block_input   = etherh_block_input;
734         ei_local->block_output  = etherh_block_output;
735         ei_local->get_8390_hdr  = etherh_get_header;
736         ei_local->interface_num = 0;
737
738         etherh_reset(dev);
739         NS8390_init(dev, 0);
740
741         ret = register_netdev(dev);
742         if (ret)
743                 goto free;
744
745         printk(KERN_INFO "%s: %s in slot %d, ",
746                 dev->name, data->name, ec->slot_no);
747
748         for (i = 0; i < 6; i++)
749                 printk("%2.2x%c", dev->dev_addr[i], i == 5 ? '\n' : ':');
750
751         ecard_set_drvdata(ec, dev);
752
753         return 0;
754
755  free:
756         if (eh->ioc_fast)
757                 iounmap(eh->ioc_fast);
758         if (eh->memc)
759                 iounmap(eh->memc);
760         free_netdev(dev);
761  release:
762         ecard_release_resources(ec);
763  out:
764         return ret;
765 }
766
767 static void __devexit etherh_remove(struct expansion_card *ec)
768 {
769         struct net_device *dev = ecard_get_drvdata(ec);
770         struct etherh_priv *eh = etherh_priv(dev);
771
772         ecard_set_drvdata(ec, NULL);
773
774         unregister_netdev(dev);
775         ec->ops = NULL;
776
777         if (eh->ioc_fast)
778                 iounmap(eh->ioc_fast);
779         iounmap(eh->memc);
780
781         free_netdev(dev);
782
783         ecard_release_resources(ec);
784 }
785
786 static struct etherh_data etherm_data = {
787         .ns8390_offset          = ETHERM_NS8390,
788         .dataport_offset        = ETHERM_NS8390 + ETHERM_DATAPORT,
789         .ctrlport_offset        = ETHERM_NS8390 + ETHERM_CTRLPORT,
790         .name                   = "ANT EtherM",
791         .supported              = SUPPORTED_10baseT_Half,
792         .tx_start_page          = ETHERM_TX_START_PAGE,
793         .stop_page              = ETHERM_STOP_PAGE,
794 };
795
796 static struct etherh_data etherlan500_data = {
797         .ns8390_offset          = ETHERH500_NS8390,
798         .dataport_offset        = ETHERH500_NS8390 + ETHERH500_DATAPORT,
799         .ctrlport_offset        = ETHERH500_CTRLPORT,
800         .ctrl_ioc               = 1,
801         .name                   = "i3 EtherH 500",
802         .supported              = SUPPORTED_10baseT_Half,
803         .tx_start_page          = ETHERH_TX_START_PAGE,
804         .stop_page              = ETHERH_STOP_PAGE,
805 };
806
807 static struct etherh_data etherlan600_data = {
808         .ns8390_offset          = ETHERH600_NS8390,
809         .dataport_offset        = ETHERH600_NS8390 + ETHERH600_DATAPORT,
810         .ctrlport_offset        = ETHERH600_NS8390 + ETHERH600_CTRLPORT,
811         .name                   = "i3 EtherH 600",
812         .supported              = SUPPORTED_10baseT_Half | SUPPORTED_TP | SUPPORTED_BNC | SUPPORTED_Autoneg,
813         .tx_start_page          = ETHERH_TX_START_PAGE,
814         .stop_page              = ETHERH_STOP_PAGE,
815 };
816
817 static struct etherh_data etherlan600a_data = {
818         .ns8390_offset          = ETHERH600_NS8390,
819         .dataport_offset        = ETHERH600_NS8390 + ETHERH600_DATAPORT,
820         .ctrlport_offset        = ETHERH600_NS8390 + ETHERH600_CTRLPORT,
821         .name                   = "i3 EtherH 600A",
822         .supported              = SUPPORTED_10baseT_Half | SUPPORTED_TP | SUPPORTED_BNC | SUPPORTED_Autoneg,
823         .tx_start_page          = ETHERH_TX_START_PAGE,
824         .stop_page              = ETHERH_STOP_PAGE,
825 };
826
827 static const struct ecard_id etherh_ids[] = {
828         { MANU_ANT, PROD_ANT_ETHERM,      &etherm_data       },
829         { MANU_I3,  PROD_I3_ETHERLAN500,  &etherlan500_data  },
830         { MANU_I3,  PROD_I3_ETHERLAN600,  &etherlan600_data  },
831         { MANU_I3,  PROD_I3_ETHERLAN600A, &etherlan600a_data },
832         { 0xffff,   0xffff }
833 };
834
835 static struct ecard_driver etherh_driver = {
836         .probe          = etherh_probe,
837         .remove         = __devexit_p(etherh_remove),
838         .id_table       = etherh_ids,
839         .drv = {
840                 .name   = DRV_NAME,
841         },
842 };
843
844 static int __init etherh_init(void)
845 {
846         int i;
847
848         for (i = 0; i < 16; i++) {
849                 etherh_regoffsets[i] = i << 2;
850                 etherm_regoffsets[i] = i << 5;
851         }
852
853         return ecard_register_driver(&etherh_driver);
854 }
855
856 static void __exit etherh_exit(void)
857 {
858         ecard_remove_driver(&etherh_driver);
859 }
860
861 module_init(etherh_init);
862 module_exit(etherh_exit);