mmc: tmio: Provide separate interrupt handlers
[pandora-kernel.git] / drivers / mmc / host / tmio_mmc_pio.c
1 /*
2  * linux/drivers/mmc/host/tmio_mmc_pio.c
3  *
4  * Copyright (C) 2011 Guennadi Liakhovetski
5  * Copyright (C) 2007 Ian Molton
6  * Copyright (C) 2004 Ian Molton
7  *
8  * This program is free software; you can redistribute it and/or modify
9  * it under the terms of the GNU General Public License version 2 as
10  * published by the Free Software Foundation.
11  *
12  * Driver for the MMC / SD / SDIO IP found in:
13  *
14  * TC6393XB, TC6391XB, TC6387XB, T7L66XB, ASIC3, SH-Mobile SoCs
15  *
16  * This driver draws mainly on scattered spec sheets, Reverse engineering
17  * of the toshiba e800  SD driver and some parts of the 2.4 ASIC3 driver (4 bit
18  * support). (Further 4 bit support from a later datasheet).
19  *
20  * TODO:
21  *   Investigate using a workqueue for PIO transfers
22  *   Eliminate FIXMEs
23  *   SDIO support
24  *   Better Power management
25  *   Handle MMC errors better
26  *   double buffer support
27  *
28  */
29
30 #include <linux/delay.h>
31 #include <linux/device.h>
32 #include <linux/highmem.h>
33 #include <linux/interrupt.h>
34 #include <linux/io.h>
35 #include <linux/irq.h>
36 #include <linux/mfd/tmio.h>
37 #include <linux/mmc/host.h>
38 #include <linux/mmc/tmio.h>
39 #include <linux/module.h>
40 #include <linux/pagemap.h>
41 #include <linux/platform_device.h>
42 #include <linux/pm_runtime.h>
43 #include <linux/scatterlist.h>
44 #include <linux/workqueue.h>
45 #include <linux/spinlock.h>
46
47 #include "tmio_mmc.h"
48
49 void tmio_mmc_enable_mmc_irqs(struct tmio_mmc_host *host, u32 i)
50 {
51         host->sdcard_irq_mask &= ~(i & TMIO_MASK_IRQ);
52         sd_ctrl_write32(host, CTL_IRQ_MASK, host->sdcard_irq_mask);
53 }
54
55 void tmio_mmc_disable_mmc_irqs(struct tmio_mmc_host *host, u32 i)
56 {
57         host->sdcard_irq_mask |= (i & TMIO_MASK_IRQ);
58         sd_ctrl_write32(host, CTL_IRQ_MASK, host->sdcard_irq_mask);
59 }
60
61 static void tmio_mmc_ack_mmc_irqs(struct tmio_mmc_host *host, u32 i)
62 {
63         sd_ctrl_write32(host, CTL_STATUS, ~i);
64 }
65
66 static void tmio_mmc_init_sg(struct tmio_mmc_host *host, struct mmc_data *data)
67 {
68         host->sg_len = data->sg_len;
69         host->sg_ptr = data->sg;
70         host->sg_orig = data->sg;
71         host->sg_off = 0;
72 }
73
74 static int tmio_mmc_next_sg(struct tmio_mmc_host *host)
75 {
76         host->sg_ptr = sg_next(host->sg_ptr);
77         host->sg_off = 0;
78         return --host->sg_len;
79 }
80
81 #ifdef CONFIG_MMC_DEBUG
82
83 #define STATUS_TO_TEXT(a, status, i) \
84         do { \
85                 if (status & TMIO_STAT_##a) { \
86                         if (i++) \
87                                 printk(" | "); \
88                         printk(#a); \
89                 } \
90         } while (0)
91
92 static void pr_debug_status(u32 status)
93 {
94         int i = 0;
95         printk(KERN_DEBUG "status: %08x = ", status);
96         STATUS_TO_TEXT(CARD_REMOVE, status, i);
97         STATUS_TO_TEXT(CARD_INSERT, status, i);
98         STATUS_TO_TEXT(SIGSTATE, status, i);
99         STATUS_TO_TEXT(WRPROTECT, status, i);
100         STATUS_TO_TEXT(CARD_REMOVE_A, status, i);
101         STATUS_TO_TEXT(CARD_INSERT_A, status, i);
102         STATUS_TO_TEXT(SIGSTATE_A, status, i);
103         STATUS_TO_TEXT(CMD_IDX_ERR, status, i);
104         STATUS_TO_TEXT(STOPBIT_ERR, status, i);
105         STATUS_TO_TEXT(ILL_FUNC, status, i);
106         STATUS_TO_TEXT(CMD_BUSY, status, i);
107         STATUS_TO_TEXT(CMDRESPEND, status, i);
108         STATUS_TO_TEXT(DATAEND, status, i);
109         STATUS_TO_TEXT(CRCFAIL, status, i);
110         STATUS_TO_TEXT(DATATIMEOUT, status, i);
111         STATUS_TO_TEXT(CMDTIMEOUT, status, i);
112         STATUS_TO_TEXT(RXOVERFLOW, status, i);
113         STATUS_TO_TEXT(TXUNDERRUN, status, i);
114         STATUS_TO_TEXT(RXRDY, status, i);
115         STATUS_TO_TEXT(TXRQ, status, i);
116         STATUS_TO_TEXT(ILL_ACCESS, status, i);
117         printk("\n");
118 }
119
120 #else
121 #define pr_debug_status(s)  do { } while (0)
122 #endif
123
124 static void tmio_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable)
125 {
126         struct tmio_mmc_host *host = mmc_priv(mmc);
127
128         if (enable) {
129                 host->sdio_irq_enabled = 1;
130                 host->sdio_irq_mask = TMIO_SDIO_MASK_ALL &
131                                         ~TMIO_SDIO_STAT_IOIRQ;
132                 sd_ctrl_write16(host, CTL_TRANSACTION_CTL, 0x0001);
133                 sd_ctrl_write16(host, CTL_SDIO_IRQ_MASK, host->sdio_irq_mask);
134         } else {
135                 host->sdio_irq_mask = TMIO_SDIO_MASK_ALL;
136                 sd_ctrl_write16(host, CTL_SDIO_IRQ_MASK, host->sdio_irq_mask);
137                 sd_ctrl_write16(host, CTL_TRANSACTION_CTL, 0x0000);
138                 host->sdio_irq_enabled = 0;
139         }
140 }
141
142 static void tmio_mmc_set_clock(struct tmio_mmc_host *host, int new_clock)
143 {
144         u32 clk = 0, clock;
145
146         if (new_clock) {
147                 for (clock = host->mmc->f_min, clk = 0x80000080;
148                         new_clock >= (clock<<1); clk >>= 1)
149                         clock <<= 1;
150                 clk |= 0x100;
151         }
152
153         if (host->set_clk_div)
154                 host->set_clk_div(host->pdev, (clk>>22) & 1);
155
156         sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, clk & 0x1ff);
157 }
158
159 static void tmio_mmc_clk_stop(struct tmio_mmc_host *host)
160 {
161         struct resource *res = platform_get_resource(host->pdev, IORESOURCE_MEM, 0);
162
163         /* implicit BUG_ON(!res) */
164         if (resource_size(res) > 0x100) {
165                 sd_ctrl_write16(host, CTL_CLK_AND_WAIT_CTL, 0x0000);
166                 msleep(10);
167         }
168
169         sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, ~0x0100 &
170                 sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
171         msleep(10);
172 }
173
174 static void tmio_mmc_clk_start(struct tmio_mmc_host *host)
175 {
176         struct resource *res = platform_get_resource(host->pdev, IORESOURCE_MEM, 0);
177
178         sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, 0x0100 |
179                 sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
180         msleep(10);
181
182         /* implicit BUG_ON(!res) */
183         if (resource_size(res) > 0x100) {
184                 sd_ctrl_write16(host, CTL_CLK_AND_WAIT_CTL, 0x0100);
185                 msleep(10);
186         }
187 }
188
189 static void tmio_mmc_reset(struct tmio_mmc_host *host)
190 {
191         struct resource *res = platform_get_resource(host->pdev, IORESOURCE_MEM, 0);
192
193         /* FIXME - should we set stop clock reg here */
194         sd_ctrl_write16(host, CTL_RESET_SD, 0x0000);
195         /* implicit BUG_ON(!res) */
196         if (resource_size(res) > 0x100)
197                 sd_ctrl_write16(host, CTL_RESET_SDIO, 0x0000);
198         msleep(10);
199         sd_ctrl_write16(host, CTL_RESET_SD, 0x0001);
200         if (resource_size(res) > 0x100)
201                 sd_ctrl_write16(host, CTL_RESET_SDIO, 0x0001);
202         msleep(10);
203 }
204
205 static void tmio_mmc_reset_work(struct work_struct *work)
206 {
207         struct tmio_mmc_host *host = container_of(work, struct tmio_mmc_host,
208                                                   delayed_reset_work.work);
209         struct mmc_request *mrq;
210         unsigned long flags;
211
212         spin_lock_irqsave(&host->lock, flags);
213         mrq = host->mrq;
214
215         /*
216          * is request already finished? Since we use a non-blocking
217          * cancel_delayed_work(), it can happen, that a .set_ios() call preempts
218          * us, so, have to check for IS_ERR(host->mrq)
219          */
220         if (IS_ERR_OR_NULL(mrq)
221             || time_is_after_jiffies(host->last_req_ts +
222                 msecs_to_jiffies(2000))) {
223                 spin_unlock_irqrestore(&host->lock, flags);
224                 return;
225         }
226
227         dev_warn(&host->pdev->dev,
228                 "timeout waiting for hardware interrupt (CMD%u)\n",
229                 mrq->cmd->opcode);
230
231         if (host->data)
232                 host->data->error = -ETIMEDOUT;
233         else if (host->cmd)
234                 host->cmd->error = -ETIMEDOUT;
235         else
236                 mrq->cmd->error = -ETIMEDOUT;
237
238         host->cmd = NULL;
239         host->data = NULL;
240         host->force_pio = false;
241
242         spin_unlock_irqrestore(&host->lock, flags);
243
244         tmio_mmc_reset(host);
245
246         /* Ready for new calls */
247         host->mrq = NULL;
248
249         mmc_request_done(host->mmc, mrq);
250 }
251
252 /* called with host->lock held, interrupts disabled */
253 static void tmio_mmc_finish_request(struct tmio_mmc_host *host)
254 {
255         struct mmc_request *mrq;
256         unsigned long flags;
257
258         spin_lock_irqsave(&host->lock, flags);
259
260         mrq = host->mrq;
261         if (IS_ERR_OR_NULL(mrq)) {
262                 spin_unlock_irqrestore(&host->lock, flags);
263                 return;
264         }
265
266         host->cmd = NULL;
267         host->data = NULL;
268         host->force_pio = false;
269
270         cancel_delayed_work(&host->delayed_reset_work);
271
272         host->mrq = NULL;
273         spin_unlock_irqrestore(&host->lock, flags);
274
275         mmc_request_done(host->mmc, mrq);
276 }
277
278 static void tmio_mmc_done_work(struct work_struct *work)
279 {
280         struct tmio_mmc_host *host = container_of(work, struct tmio_mmc_host,
281                                                   done);
282         tmio_mmc_finish_request(host);
283 }
284
285 /* These are the bitmasks the tmio chip requires to implement the MMC response
286  * types. Note that R1 and R6 are the same in this scheme. */
287 #define APP_CMD        0x0040
288 #define RESP_NONE      0x0300
289 #define RESP_R1        0x0400
290 #define RESP_R1B       0x0500
291 #define RESP_R2        0x0600
292 #define RESP_R3        0x0700
293 #define DATA_PRESENT   0x0800
294 #define TRANSFER_READ  0x1000
295 #define TRANSFER_MULTI 0x2000
296 #define SECURITY_CMD   0x4000
297
298 static int tmio_mmc_start_command(struct tmio_mmc_host *host, struct mmc_command *cmd)
299 {
300         struct mmc_data *data = host->data;
301         int c = cmd->opcode;
302
303         /* Command 12 is handled by hardware */
304         if (cmd->opcode == 12 && !cmd->arg) {
305                 sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0x001);
306                 return 0;
307         }
308
309         switch (mmc_resp_type(cmd)) {
310         case MMC_RSP_NONE: c |= RESP_NONE; break;
311         case MMC_RSP_R1:   c |= RESP_R1;   break;
312         case MMC_RSP_R1B:  c |= RESP_R1B;  break;
313         case MMC_RSP_R2:   c |= RESP_R2;   break;
314         case MMC_RSP_R3:   c |= RESP_R3;   break;
315         default:
316                 pr_debug("Unknown response type %d\n", mmc_resp_type(cmd));
317                 return -EINVAL;
318         }
319
320         host->cmd = cmd;
321
322 /* FIXME - this seems to be ok commented out but the spec suggest this bit
323  *         should be set when issuing app commands.
324  *      if(cmd->flags & MMC_FLAG_ACMD)
325  *              c |= APP_CMD;
326  */
327         if (data) {
328                 c |= DATA_PRESENT;
329                 if (data->blocks > 1) {
330                         sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0x100);
331                         c |= TRANSFER_MULTI;
332                 }
333                 if (data->flags & MMC_DATA_READ)
334                         c |= TRANSFER_READ;
335         }
336
337         tmio_mmc_enable_mmc_irqs(host, TMIO_MASK_CMD);
338
339         /* Fire off the command */
340         sd_ctrl_write32(host, CTL_ARG_REG, cmd->arg);
341         sd_ctrl_write16(host, CTL_SD_CMD, c);
342
343         return 0;
344 }
345
346 /*
347  * This chip always returns (at least?) as much data as you ask for.
348  * I'm unsure what happens if you ask for less than a block. This should be
349  * looked into to ensure that a funny length read doesn't hose the controller.
350  */
351 static void tmio_mmc_pio_irq(struct tmio_mmc_host *host)
352 {
353         struct mmc_data *data = host->data;
354         void *sg_virt;
355         unsigned short *buf;
356         unsigned int count;
357         unsigned long flags;
358
359         if ((host->chan_tx || host->chan_rx) && !host->force_pio) {
360                 pr_err("PIO IRQ in DMA mode!\n");
361                 return;
362         } else if (!data) {
363                 pr_debug("Spurious PIO IRQ\n");
364                 return;
365         }
366
367         sg_virt = tmio_mmc_kmap_atomic(host->sg_ptr, &flags);
368         buf = (unsigned short *)(sg_virt + host->sg_off);
369
370         count = host->sg_ptr->length - host->sg_off;
371         if (count > data->blksz)
372                 count = data->blksz;
373
374         pr_debug("count: %08x offset: %08x flags %08x\n",
375                  count, host->sg_off, data->flags);
376
377         /* Transfer the data */
378         if (data->flags & MMC_DATA_READ)
379                 sd_ctrl_read16_rep(host, CTL_SD_DATA_PORT, buf, count >> 1);
380         else
381                 sd_ctrl_write16_rep(host, CTL_SD_DATA_PORT, buf, count >> 1);
382
383         host->sg_off += count;
384
385         tmio_mmc_kunmap_atomic(host->sg_ptr, &flags, sg_virt);
386
387         if (host->sg_off == host->sg_ptr->length)
388                 tmio_mmc_next_sg(host);
389
390         return;
391 }
392
393 static void tmio_mmc_check_bounce_buffer(struct tmio_mmc_host *host)
394 {
395         if (host->sg_ptr == &host->bounce_sg) {
396                 unsigned long flags;
397                 void *sg_vaddr = tmio_mmc_kmap_atomic(host->sg_orig, &flags);
398                 memcpy(sg_vaddr, host->bounce_buf, host->bounce_sg.length);
399                 tmio_mmc_kunmap_atomic(host->sg_orig, &flags, sg_vaddr);
400         }
401 }
402
403 /* needs to be called with host->lock held */
404 void tmio_mmc_do_data_irq(struct tmio_mmc_host *host)
405 {
406         struct mmc_data *data = host->data;
407         struct mmc_command *stop;
408
409         host->data = NULL;
410
411         if (!data) {
412                 dev_warn(&host->pdev->dev, "Spurious data end IRQ\n");
413                 return;
414         }
415         stop = data->stop;
416
417         /* FIXME - return correct transfer count on errors */
418         if (!data->error)
419                 data->bytes_xfered = data->blocks * data->blksz;
420         else
421                 data->bytes_xfered = 0;
422
423         pr_debug("Completed data request\n");
424
425         /*
426          * FIXME: other drivers allow an optional stop command of any given type
427          *        which we dont do, as the chip can auto generate them.
428          *        Perhaps we can be smarter about when to use auto CMD12 and
429          *        only issue the auto request when we know this is the desired
430          *        stop command, allowing fallback to the stop command the
431          *        upper layers expect. For now, we do what works.
432          */
433
434         if (data->flags & MMC_DATA_READ) {
435                 if (host->chan_rx && !host->force_pio)
436                         tmio_mmc_check_bounce_buffer(host);
437                 dev_dbg(&host->pdev->dev, "Complete Rx request %p\n",
438                         host->mrq);
439         } else {
440                 dev_dbg(&host->pdev->dev, "Complete Tx request %p\n",
441                         host->mrq);
442         }
443
444         if (stop) {
445                 if (stop->opcode == 12 && !stop->arg)
446                         sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0x000);
447                 else
448                         BUG();
449         }
450
451         schedule_work(&host->done);
452 }
453
454 static void tmio_mmc_data_irq(struct tmio_mmc_host *host)
455 {
456         struct mmc_data *data;
457         spin_lock(&host->lock);
458         data = host->data;
459
460         if (!data)
461                 goto out;
462
463         if (host->chan_tx && (data->flags & MMC_DATA_WRITE) && !host->force_pio) {
464                 /*
465                  * Has all data been written out yet? Testing on SuperH showed,
466                  * that in most cases the first interrupt comes already with the
467                  * BUSY status bit clear, but on some operations, like mount or
468                  * in the beginning of a write / sync / umount, there is one
469                  * DATAEND interrupt with the BUSY bit set, in this cases
470                  * waiting for one more interrupt fixes the problem.
471                  */
472                 if (!(sd_ctrl_read32(host, CTL_STATUS) & TMIO_STAT_CMD_BUSY)) {
473                         tmio_mmc_disable_mmc_irqs(host, TMIO_STAT_DATAEND);
474                         tasklet_schedule(&host->dma_complete);
475                 }
476         } else if (host->chan_rx && (data->flags & MMC_DATA_READ) && !host->force_pio) {
477                 tmio_mmc_disable_mmc_irqs(host, TMIO_STAT_DATAEND);
478                 tasklet_schedule(&host->dma_complete);
479         } else {
480                 tmio_mmc_do_data_irq(host);
481                 tmio_mmc_disable_mmc_irqs(host, TMIO_MASK_READOP | TMIO_MASK_WRITEOP);
482         }
483 out:
484         spin_unlock(&host->lock);
485 }
486
487 static void tmio_mmc_cmd_irq(struct tmio_mmc_host *host,
488         unsigned int stat)
489 {
490         struct mmc_command *cmd = host->cmd;
491         int i, addr;
492
493         spin_lock(&host->lock);
494
495         if (!host->cmd) {
496                 pr_debug("Spurious CMD irq\n");
497                 goto out;
498         }
499
500         host->cmd = NULL;
501
502         /* This controller is sicker than the PXA one. Not only do we need to
503          * drop the top 8 bits of the first response word, we also need to
504          * modify the order of the response for short response command types.
505          */
506
507         for (i = 3, addr = CTL_RESPONSE ; i >= 0 ; i--, addr += 4)
508                 cmd->resp[i] = sd_ctrl_read32(host, addr);
509
510         if (cmd->flags &  MMC_RSP_136) {
511                 cmd->resp[0] = (cmd->resp[0] << 8) | (cmd->resp[1] >> 24);
512                 cmd->resp[1] = (cmd->resp[1] << 8) | (cmd->resp[2] >> 24);
513                 cmd->resp[2] = (cmd->resp[2] << 8) | (cmd->resp[3] >> 24);
514                 cmd->resp[3] <<= 8;
515         } else if (cmd->flags & MMC_RSP_R3) {
516                 cmd->resp[0] = cmd->resp[3];
517         }
518
519         if (stat & TMIO_STAT_CMDTIMEOUT)
520                 cmd->error = -ETIMEDOUT;
521         else if (stat & TMIO_STAT_CRCFAIL && cmd->flags & MMC_RSP_CRC)
522                 cmd->error = -EILSEQ;
523
524         /* If there is data to handle we enable data IRQs here, and
525          * we will ultimatley finish the request in the data_end handler.
526          * If theres no data or we encountered an error, finish now.
527          */
528         if (host->data && !cmd->error) {
529                 if (host->data->flags & MMC_DATA_READ) {
530                         if (host->force_pio || !host->chan_rx)
531                                 tmio_mmc_enable_mmc_irqs(host, TMIO_MASK_READOP);
532                         else
533                                 tasklet_schedule(&host->dma_issue);
534                 } else {
535                         if (host->force_pio || !host->chan_tx)
536                                 tmio_mmc_enable_mmc_irqs(host, TMIO_MASK_WRITEOP);
537                         else
538                                 tasklet_schedule(&host->dma_issue);
539                 }
540         } else {
541                 schedule_work(&host->done);
542         }
543
544 out:
545         spin_unlock(&host->lock);
546 }
547
548 static void tmio_mmc_card_irq_status(struct tmio_mmc_host *host,
549                                        int *ireg, int *status)
550 {
551         *status = sd_ctrl_read32(host, CTL_STATUS);
552         *ireg = *status & TMIO_MASK_IRQ & ~host->sdcard_irq_mask;
553
554         pr_debug_status(*status);
555         pr_debug_status(*ireg);
556 }
557
558 static bool __tmio_mmc_card_detect_irq(struct tmio_mmc_host *host,
559                                       int ireg, int status)
560 {
561         struct mmc_host *mmc = host->mmc;
562
563         /* Card insert / remove attempts */
564         if (ireg & (TMIO_STAT_CARD_INSERT | TMIO_STAT_CARD_REMOVE)) {
565                 tmio_mmc_ack_mmc_irqs(host, TMIO_STAT_CARD_INSERT |
566                         TMIO_STAT_CARD_REMOVE);
567                 if ((((ireg & TMIO_STAT_CARD_REMOVE) && mmc->card) ||
568                      ((ireg & TMIO_STAT_CARD_INSERT) && !mmc->card)) &&
569                     !work_pending(&mmc->detect.work))
570                         mmc_detect_change(host->mmc, msecs_to_jiffies(100));
571                 return true;
572         }
573
574         return false;
575 }
576
577 irqreturn_t tmio_mmc_card_detect_irq(int irq, void *devid)
578 {
579         unsigned int ireg, status;
580         struct tmio_mmc_host *host = devid;
581
582         tmio_mmc_card_irq_status(host, &ireg, &status);
583         __tmio_mmc_card_detect_irq(host, ireg, status);
584
585         return IRQ_HANDLED;
586 }
587 EXPORT_SYMBOL(tmio_mmc_card_detect_irq);
588
589 static bool __tmio_mmc_sdcard_irq(struct tmio_mmc_host *host,
590                                  int ireg, int status)
591 {
592         /* Command completion */
593         if (ireg & (TMIO_STAT_CMDRESPEND | TMIO_STAT_CMDTIMEOUT)) {
594                 tmio_mmc_ack_mmc_irqs(host,
595                              TMIO_STAT_CMDRESPEND |
596                              TMIO_STAT_CMDTIMEOUT);
597                 tmio_mmc_cmd_irq(host, status);
598                 return true;
599         }
600
601         /* Data transfer */
602         if (ireg & (TMIO_STAT_RXRDY | TMIO_STAT_TXRQ)) {
603                 tmio_mmc_ack_mmc_irqs(host, TMIO_STAT_RXRDY | TMIO_STAT_TXRQ);
604                 tmio_mmc_pio_irq(host);
605                 return true;
606         }
607
608         /* Data transfer completion */
609         if (ireg & TMIO_STAT_DATAEND) {
610                 tmio_mmc_ack_mmc_irqs(host, TMIO_STAT_DATAEND);
611                 tmio_mmc_data_irq(host);
612                 return true;
613         }
614
615         return false;
616 }
617
618 irqreturn_t tmio_mmc_sdcard_irq(int irq, void *devid)
619 {
620         unsigned int ireg, status;
621         struct tmio_mmc_host *host = devid;
622
623         tmio_mmc_card_irq_status(host, &ireg, &status);
624         __tmio_mmc_sdcard_irq(host, ireg, status);
625
626         return IRQ_HANDLED;
627 }
628 EXPORT_SYMBOL(tmio_mmc_sdcard_irq);
629
630 irqreturn_t tmio_mmc_sdio_irq(int irq, void *devid)
631 {
632         struct tmio_mmc_host *host = devid;
633         struct mmc_host *mmc = host->mmc;
634         struct tmio_mmc_data *pdata = host->pdata;
635         unsigned int ireg, status;
636
637         if (!(pdata->flags & TMIO_MMC_SDIO_IRQ))
638                 return IRQ_HANDLED;
639
640         status = sd_ctrl_read16(host, CTL_SDIO_STATUS);
641         ireg = status & TMIO_SDIO_MASK_ALL & ~host->sdcard_irq_mask;
642
643         sd_ctrl_write16(host, CTL_SDIO_STATUS, status & ~TMIO_SDIO_MASK_ALL);
644
645         if (mmc->caps & MMC_CAP_SDIO_IRQ && ireg & TMIO_SDIO_STAT_IOIRQ)
646                 mmc_signal_sdio_irq(mmc);
647
648         return IRQ_HANDLED;
649 }
650 EXPORT_SYMBOL(tmio_mmc_sdio_irq);
651
652 irqreturn_t tmio_mmc_irq(int irq, void *devid)
653 {
654         struct tmio_mmc_host *host = devid;
655         unsigned int ireg, status;
656
657         pr_debug("MMC IRQ begin\n");
658
659         tmio_mmc_card_irq_status(host, &ireg, &status);
660         if (__tmio_mmc_card_detect_irq(host, ireg, status))
661                 return IRQ_HANDLED;
662         if (__tmio_mmc_sdcard_irq(host, ireg, status))
663                 return IRQ_HANDLED;
664
665         tmio_mmc_sdio_irq(irq, devid);
666
667         return IRQ_HANDLED;
668 }
669 EXPORT_SYMBOL(tmio_mmc_irq);
670
671 static int tmio_mmc_start_data(struct tmio_mmc_host *host,
672         struct mmc_data *data)
673 {
674         struct tmio_mmc_data *pdata = host->pdata;
675
676         pr_debug("setup data transfer: blocksize %08x  nr_blocks %d\n",
677                  data->blksz, data->blocks);
678
679         /* Some hardware cannot perform 2 byte requests in 4 bit mode */
680         if (host->mmc->ios.bus_width == MMC_BUS_WIDTH_4) {
681                 int blksz_2bytes = pdata->flags & TMIO_MMC_BLKSZ_2BYTES;
682
683                 if (data->blksz < 2 || (data->blksz < 4 && !blksz_2bytes)) {
684                         pr_err("%s: %d byte block unsupported in 4 bit mode\n",
685                                mmc_hostname(host->mmc), data->blksz);
686                         return -EINVAL;
687                 }
688         }
689
690         tmio_mmc_init_sg(host, data);
691         host->data = data;
692
693         /* Set transfer length / blocksize */
694         sd_ctrl_write16(host, CTL_SD_XFER_LEN, data->blksz);
695         sd_ctrl_write16(host, CTL_XFER_BLK_COUNT, data->blocks);
696
697         tmio_mmc_start_dma(host, data);
698
699         return 0;
700 }
701
702 /* Process requests from the MMC layer */
703 static void tmio_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
704 {
705         struct tmio_mmc_host *host = mmc_priv(mmc);
706         unsigned long flags;
707         int ret;
708
709         spin_lock_irqsave(&host->lock, flags);
710
711         if (host->mrq) {
712                 pr_debug("request not null\n");
713                 if (IS_ERR(host->mrq)) {
714                         spin_unlock_irqrestore(&host->lock, flags);
715                         mrq->cmd->error = -EAGAIN;
716                         mmc_request_done(mmc, mrq);
717                         return;
718                 }
719         }
720
721         host->last_req_ts = jiffies;
722         wmb();
723         host->mrq = mrq;
724
725         spin_unlock_irqrestore(&host->lock, flags);
726
727         if (mrq->data) {
728                 ret = tmio_mmc_start_data(host, mrq->data);
729                 if (ret)
730                         goto fail;
731         }
732
733         ret = tmio_mmc_start_command(host, mrq->cmd);
734         if (!ret) {
735                 schedule_delayed_work(&host->delayed_reset_work,
736                                       msecs_to_jiffies(2000));
737                 return;
738         }
739
740 fail:
741         host->force_pio = false;
742         host->mrq = NULL;
743         mrq->cmd->error = ret;
744         mmc_request_done(mmc, mrq);
745 }
746
747 /* Set MMC clock / power.
748  * Note: This controller uses a simple divider scheme therefore it cannot
749  * run a MMC card at full speed (20MHz). The max clock is 24MHz on SD, but as
750  * MMC wont run that fast, it has to be clocked at 12MHz which is the next
751  * slowest setting.
752  */
753 static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
754 {
755         struct tmio_mmc_host *host = mmc_priv(mmc);
756         struct tmio_mmc_data *pdata = host->pdata;
757         unsigned long flags;
758
759         mutex_lock(&host->ios_lock);
760
761         spin_lock_irqsave(&host->lock, flags);
762         if (host->mrq) {
763                 if (IS_ERR(host->mrq)) {
764                         dev_dbg(&host->pdev->dev,
765                                 "%s.%d: concurrent .set_ios(), clk %u, mode %u\n",
766                                 current->comm, task_pid_nr(current),
767                                 ios->clock, ios->power_mode);
768                         host->mrq = ERR_PTR(-EINTR);
769                 } else {
770                         dev_dbg(&host->pdev->dev,
771                                 "%s.%d: CMD%u active since %lu, now %lu!\n",
772                                 current->comm, task_pid_nr(current),
773                                 host->mrq->cmd->opcode, host->last_req_ts, jiffies);
774                 }
775                 spin_unlock_irqrestore(&host->lock, flags);
776
777                 mutex_unlock(&host->ios_lock);
778                 return;
779         }
780
781         host->mrq = ERR_PTR(-EBUSY);
782
783         spin_unlock_irqrestore(&host->lock, flags);
784
785         /*
786          * pdata->power == false only if COLD_CD is available, otherwise only
787          * in short time intervals during probing or resuming
788          */
789         if (ios->power_mode == MMC_POWER_ON && ios->clock) {
790                 if (!pdata->power) {
791                         pm_runtime_get_sync(&host->pdev->dev);
792                         pdata->power = true;
793                 }
794                 tmio_mmc_set_clock(host, ios->clock);
795                 /* power up SD bus */
796                 if (host->set_pwr)
797                         host->set_pwr(host->pdev, 1);
798                 /* start bus clock */
799                 tmio_mmc_clk_start(host);
800         } else if (ios->power_mode != MMC_POWER_UP) {
801                 if (host->set_pwr)
802                         host->set_pwr(host->pdev, 0);
803                 if ((pdata->flags & TMIO_MMC_HAS_COLD_CD) &&
804                     pdata->power) {
805                         pdata->power = false;
806                         pm_runtime_put(&host->pdev->dev);
807                 }
808                 tmio_mmc_clk_stop(host);
809         }
810
811         switch (ios->bus_width) {
812         case MMC_BUS_WIDTH_1:
813                 sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, 0x80e0);
814         break;
815         case MMC_BUS_WIDTH_4:
816                 sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, 0x00e0);
817         break;
818         }
819
820         /* Let things settle. delay taken from winCE driver */
821         udelay(140);
822         if (PTR_ERR(host->mrq) == -EINTR)
823                 dev_dbg(&host->pdev->dev,
824                         "%s.%d: IOS interrupted: clk %u, mode %u",
825                         current->comm, task_pid_nr(current),
826                         ios->clock, ios->power_mode);
827         host->mrq = NULL;
828
829         mutex_unlock(&host->ios_lock);
830 }
831
832 static int tmio_mmc_get_ro(struct mmc_host *mmc)
833 {
834         struct tmio_mmc_host *host = mmc_priv(mmc);
835         struct tmio_mmc_data *pdata = host->pdata;
836
837         return !((pdata->flags & TMIO_MMC_WRPROTECT_DISABLE) ||
838                  (sd_ctrl_read32(host, CTL_STATUS) & TMIO_STAT_WRPROTECT));
839 }
840
841 static int tmio_mmc_get_cd(struct mmc_host *mmc)
842 {
843         struct tmio_mmc_host *host = mmc_priv(mmc);
844         struct tmio_mmc_data *pdata = host->pdata;
845
846         if (!pdata->get_cd)
847                 return -ENOSYS;
848         else
849                 return pdata->get_cd(host->pdev);
850 }
851
852 static const struct mmc_host_ops tmio_mmc_ops = {
853         .request        = tmio_mmc_request,
854         .set_ios        = tmio_mmc_set_ios,
855         .get_ro         = tmio_mmc_get_ro,
856         .get_cd         = tmio_mmc_get_cd,
857         .enable_sdio_irq = tmio_mmc_enable_sdio_irq,
858 };
859
860 int __devinit tmio_mmc_host_probe(struct tmio_mmc_host **host,
861                                   struct platform_device *pdev,
862                                   struct tmio_mmc_data *pdata)
863 {
864         struct tmio_mmc_host *_host;
865         struct mmc_host *mmc;
866         struct resource *res_ctl;
867         int ret;
868         u32 irq_mask = TMIO_MASK_CMD;
869
870         res_ctl = platform_get_resource(pdev, IORESOURCE_MEM, 0);
871         if (!res_ctl)
872                 return -EINVAL;
873
874         mmc = mmc_alloc_host(sizeof(struct tmio_mmc_host), &pdev->dev);
875         if (!mmc)
876                 return -ENOMEM;
877
878         pdata->dev = &pdev->dev;
879         _host = mmc_priv(mmc);
880         _host->pdata = pdata;
881         _host->mmc = mmc;
882         _host->pdev = pdev;
883         platform_set_drvdata(pdev, mmc);
884
885         _host->set_pwr = pdata->set_pwr;
886         _host->set_clk_div = pdata->set_clk_div;
887
888         /* SD control register space size is 0x200, 0x400 for bus_shift=1 */
889         _host->bus_shift = resource_size(res_ctl) >> 10;
890
891         _host->ctl = ioremap(res_ctl->start, resource_size(res_ctl));
892         if (!_host->ctl) {
893                 ret = -ENOMEM;
894                 goto host_free;
895         }
896
897         mmc->ops = &tmio_mmc_ops;
898         mmc->caps = MMC_CAP_4_BIT_DATA | pdata->capabilities;
899         mmc->f_max = pdata->hclk;
900         mmc->f_min = mmc->f_max / 512;
901         mmc->max_segs = 32;
902         mmc->max_blk_size = 512;
903         mmc->max_blk_count = (PAGE_CACHE_SIZE / mmc->max_blk_size) *
904                 mmc->max_segs;
905         mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
906         mmc->max_seg_size = mmc->max_req_size;
907         if (pdata->ocr_mask)
908                 mmc->ocr_avail = pdata->ocr_mask;
909         else
910                 mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
911
912         pdata->power = false;
913         pm_runtime_enable(&pdev->dev);
914         ret = pm_runtime_resume(&pdev->dev);
915         if (ret < 0)
916                 goto pm_disable;
917
918         tmio_mmc_clk_stop(_host);
919         tmio_mmc_reset(_host);
920
921         _host->sdcard_irq_mask = sd_ctrl_read32(_host, CTL_IRQ_MASK);
922         tmio_mmc_disable_mmc_irqs(_host, TMIO_MASK_ALL);
923         if (pdata->flags & TMIO_MMC_SDIO_IRQ)
924                 tmio_mmc_enable_sdio_irq(mmc, 0);
925
926         spin_lock_init(&_host->lock);
927         mutex_init(&_host->ios_lock);
928
929         /* Init delayed work for request timeouts */
930         INIT_DELAYED_WORK(&_host->delayed_reset_work, tmio_mmc_reset_work);
931         INIT_WORK(&_host->done, tmio_mmc_done_work);
932
933         /* See if we also get DMA */
934         tmio_mmc_request_dma(_host, pdata);
935
936         /* We have to keep the device powered for its card detection to work */
937         if (!(pdata->flags & TMIO_MMC_HAS_COLD_CD)) {
938                 pdata->power = true;
939                 pm_runtime_get_noresume(&pdev->dev);
940         }
941
942         mmc_add_host(mmc);
943
944         /* Unmask the IRQs we want to know about */
945         if (!_host->chan_rx)
946                 irq_mask |= TMIO_MASK_READOP;
947         if (!_host->chan_tx)
948                 irq_mask |= TMIO_MASK_WRITEOP;
949
950         tmio_mmc_enable_mmc_irqs(_host, irq_mask);
951
952         *host = _host;
953
954         return 0;
955
956 pm_disable:
957         pm_runtime_disable(&pdev->dev);
958         iounmap(_host->ctl);
959 host_free:
960         mmc_free_host(mmc);
961
962         return ret;
963 }
964 EXPORT_SYMBOL(tmio_mmc_host_probe);
965
966 void tmio_mmc_host_remove(struct tmio_mmc_host *host)
967 {
968         struct platform_device *pdev = host->pdev;
969
970         /*
971          * We don't have to manipulate pdata->power here: if there is a card in
972          * the slot, the runtime PM is active and our .runtime_resume() will not
973          * be run. If there is no card in the slot and the platform can suspend
974          * the controller, the runtime PM is suspended and pdata->power == false,
975          * so, our .runtime_resume() will not try to detect a card in the slot.
976          */
977         if (host->pdata->flags & TMIO_MMC_HAS_COLD_CD)
978                 pm_runtime_get_sync(&pdev->dev);
979
980         mmc_remove_host(host->mmc);
981         cancel_work_sync(&host->done);
982         cancel_delayed_work_sync(&host->delayed_reset_work);
983         tmio_mmc_release_dma(host);
984
985         pm_runtime_put_sync(&pdev->dev);
986         pm_runtime_disable(&pdev->dev);
987
988         iounmap(host->ctl);
989         mmc_free_host(host->mmc);
990 }
991 EXPORT_SYMBOL(tmio_mmc_host_remove);
992
993 #ifdef CONFIG_PM
994 int tmio_mmc_host_suspend(struct device *dev)
995 {
996         struct mmc_host *mmc = dev_get_drvdata(dev);
997         struct tmio_mmc_host *host = mmc_priv(mmc);
998         int ret = mmc_suspend_host(mmc);
999
1000         if (!ret)
1001                 tmio_mmc_disable_mmc_irqs(host, TMIO_MASK_ALL);
1002
1003         host->pm_error = pm_runtime_put_sync(dev);
1004
1005         return ret;
1006 }
1007 EXPORT_SYMBOL(tmio_mmc_host_suspend);
1008
1009 int tmio_mmc_host_resume(struct device *dev)
1010 {
1011         struct mmc_host *mmc = dev_get_drvdata(dev);
1012         struct tmio_mmc_host *host = mmc_priv(mmc);
1013
1014         /* The MMC core will perform the complete set up */
1015         host->pdata->power = false;
1016
1017         host->pm_global = true;
1018         if (!host->pm_error)
1019                 pm_runtime_get_sync(dev);
1020
1021         if (host->pm_global) {
1022                 /* Runtime PM resume callback didn't run */
1023                 tmio_mmc_reset(host);
1024                 tmio_mmc_enable_dma(host, true);
1025                 host->pm_global = false;
1026         }
1027
1028         return mmc_resume_host(mmc);
1029 }
1030 EXPORT_SYMBOL(tmio_mmc_host_resume);
1031
1032 #endif  /* CONFIG_PM */
1033
1034 int tmio_mmc_host_runtime_suspend(struct device *dev)
1035 {
1036         return 0;
1037 }
1038 EXPORT_SYMBOL(tmio_mmc_host_runtime_suspend);
1039
1040 int tmio_mmc_host_runtime_resume(struct device *dev)
1041 {
1042         struct mmc_host *mmc = dev_get_drvdata(dev);
1043         struct tmio_mmc_host *host = mmc_priv(mmc);
1044         struct tmio_mmc_data *pdata = host->pdata;
1045
1046         tmio_mmc_reset(host);
1047         tmio_mmc_enable_dma(host, true);
1048
1049         if (pdata->power) {
1050                 /* Only entered after a card-insert interrupt */
1051                 if (!mmc->card)
1052                         tmio_mmc_set_ios(mmc, &mmc->ios);
1053                 mmc_detect_change(mmc, msecs_to_jiffies(100));
1054         }
1055         host->pm_global = false;
1056
1057         return 0;
1058 }
1059 EXPORT_SYMBOL(tmio_mmc_host_runtime_resume);
1060
1061 MODULE_LICENSE("GPL v2");