drivers/mmc/host/sdhci.c

   1 /*
   2  *  linux/drivers/mmc/host/sdhci.c - Secure Digital Host Controller Interface driver
   3  *
   4  *  Copyright (C) 2005-2008 Pierre Ossman, All Rights Reserved.
   5  *
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License as published by
   8  * the Free Software Foundation; either version 2 of the License, or (at
   9  * your option) any later version.
  10  *
  11  * Thanks to the following companies for their support:
  12  *
  13  *     - JMicron (hardware and technical support)
  14  */
  15
  16 #include <linux/delay.h>
  17 #include <linux/highmem.h>
  18 #include <linux/io.h>
  19 #include <linux/dma-mapping.h>
  20 #include <linux/slab.h>
  21 #include <linux/scatterlist.h>
  22 #include <linux/regulator/consumer.h>
  23
  24 #include <linux/leds.h>
  25
  26 #include <linux/mmc/mmc.h>
  27 #include <linux/mmc/host.h>
  28
  29 #include "sdhci.h"
  30
  31 #define DRIVER_NAME "sdhci"
  32
  33 #define DBG(f, x...) \
  34         pr_debug(DRIVER_NAME " [%s()]: " f, __func__,## x)
  35
  36 #if defined(CONFIG_LEDS_CLASS) || (defined(CONFIG_LEDS_CLASS_MODULE) && \
  37         defined(CONFIG_MMC_SDHCI_MODULE))
  38 #define SDHCI_USE_LEDS_CLASS
  39 #endif
  40
  41 static unsigned int debug_quirks = 0;
  42
  43 static void sdhci_prepare_data(struct sdhci_host *, struct mmc_data *);
  44 static void sdhci_finish_data(struct sdhci_host *);
  45
  46 static void sdhci_send_command(struct sdhci_host *, struct mmc_command *);
  47 static void sdhci_finish_command(struct sdhci_host *);
  48
  49 static void sdhci_dumpregs(struct sdhci_host *host)
  50 {
  51         printk(KERN_DEBUG DRIVER_NAME ": =========== REGISTER DUMP (%s)===========\n",
  52                 mmc_hostname(host->mmc));
  53
  54         printk(KERN_DEBUG DRIVER_NAME ": Sys addr: 0x%08x | Version:  0x%08x\n",
  55                 sdhci_readl(host, SDHCI_DMA_ADDRESS),
  56                 sdhci_readw(host, SDHCI_HOST_VERSION));
  57         printk(KERN_DEBUG DRIVER_NAME ": Blk size: 0x%08x | Blk cnt:  0x%08x\n",
  58                 sdhci_readw(host, SDHCI_BLOCK_SIZE),
  59                 sdhci_readw(host, SDHCI_BLOCK_COUNT));
  60         printk(KERN_DEBUG DRIVER_NAME ": Argument: 0x%08x | Trn mode: 0x%08x\n",
  61                 sdhci_readl(host, SDHCI_ARGUMENT),
  62                 sdhci_readw(host, SDHCI_TRANSFER_MODE));
  63         printk(KERN_DEBUG DRIVER_NAME ": Present:  0x%08x | Host ctl: 0x%08x\n",
  64                 sdhci_readl(host, SDHCI_PRESENT_STATE),
  65                 sdhci_readb(host, SDHCI_HOST_CONTROL));
  66         printk(KERN_DEBUG DRIVER_NAME ": Power:    0x%08x | Blk gap:  0x%08x\n",
  67                 sdhci_readb(host, SDHCI_POWER_CONTROL),
  68                 sdhci_readb(host, SDHCI_BLOCK_GAP_CONTROL));
  69         printk(KERN_DEBUG DRIVER_NAME ": Wake-up:  0x%08x | Clock:    0x%08x\n",
  70                 sdhci_readb(host, SDHCI_WAKE_UP_CONTROL),
  71                 sdhci_readw(host, SDHCI_CLOCK_CONTROL));
  72         printk(KERN_DEBUG DRIVER_NAME ": Timeout:  0x%08x | Int stat: 0x%08x\n",
  73                 sdhci_readb(host, SDHCI_TIMEOUT_CONTROL),
  74                 sdhci_readl(host, SDHCI_INT_STATUS));
  75         printk(KERN_DEBUG DRIVER_NAME ": Int enab: 0x%08x | Sig enab: 0x%08x\n",
  76                 sdhci_readl(host, SDHCI_INT_ENABLE),
  77                 sdhci_readl(host, SDHCI_SIGNAL_ENABLE));
  78         printk(KERN_DEBUG DRIVER_NAME ": AC12 err: 0x%08x | Slot int: 0x%08x\n",
  79                 sdhci_readw(host, SDHCI_ACMD12_ERR),
  80                 sdhci_readw(host, SDHCI_SLOT_INT_STATUS));
  81         printk(KERN_DEBUG DRIVER_NAME ": Caps:     0x%08x | Caps_1:   0x%08x\n",
  82                 sdhci_readl(host, SDHCI_CAPABILITIES),
  83                 sdhci_readl(host, SDHCI_CAPABILITIES_1));
  84         printk(KERN_DEBUG DRIVER_NAME ": Cmd:      0x%08x | Max curr: 0x%08x\n",
  85                 sdhci_readw(host, SDHCI_COMMAND),
  86                 sdhci_readl(host, SDHCI_MAX_CURRENT));
  87
  88         if (host->flags & SDHCI_USE_ADMA)
  89                 printk(KERN_DEBUG DRIVER_NAME ": ADMA Err: 0x%08x | ADMA Ptr: 0x%08x\n",
  90                        readl(host->ioaddr + SDHCI_ADMA_ERROR),
  91                        readl(host->ioaddr + SDHCI_ADMA_ADDRESS));
  92
  93         printk(KERN_DEBUG DRIVER_NAME ": ===========================================\n");
  94 }
  95
  96 /*****************************************************************************\
  97  *                                                                           *
  98  * Low level functions                                                       *
  99  *                                                                           *
 100 \*****************************************************************************/
 101
 102 static void sdhci_clear_set_irqs(struct sdhci_host *host, u32 clear, u32 set)
 103 {
 104         u32 ier;
 105
 106         ier = sdhci_readl(host, SDHCI_INT_ENABLE);
 107         ier &= ~clear;
 108         ier |= set;
 109         sdhci_writel(host, ier, SDHCI_INT_ENABLE);
 110         sdhci_writel(host, ier, SDHCI_SIGNAL_ENABLE);
 111 }
 112
 113 static void sdhci_unmask_irqs(struct sdhci_host *host, u32 irqs)
 114 {
 115         sdhci_clear_set_irqs(host, 0, irqs);
 116 }
 117
 118 static void sdhci_mask_irqs(struct sdhci_host *host, u32 irqs)
 119 {
 120         sdhci_clear_set_irqs(host, irqs, 0);
 121 }
 122
 123 static void sdhci_set_card_detection(struct sdhci_host *host, bool enable)
 124 {
 125         u32 irqs = SDHCI_INT_CARD_REMOVE | SDHCI_INT_CARD_INSERT;
 126
 127         if (host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION)
 128                 return;
 129
 130         if (enable)
 131                 sdhci_unmask_irqs(host, irqs);
 132         else
 133                 sdhci_mask_irqs(host, irqs);
 134 }
 135
 136 static void sdhci_enable_card_detection(struct sdhci_host *host)
 137 {
 138         sdhci_set_card_detection(host, true);
 139 }
 140
 141 static void sdhci_disable_card_detection(struct sdhci_host *host)
 142 {
 143         sdhci_set_card_detection(host, false);
 144 }
 145
 146 static void sdhci_reset(struct sdhci_host *host, u8 mask)
 147 {
 148         unsigned long timeout;
 149         u32 uninitialized_var(ier);
 150
 151         if (host->quirks & SDHCI_QUIRK_NO_CARD_NO_RESET) {
 152                 if (!(sdhci_readl(host, SDHCI_PRESENT_STATE) &
 153                         SDHCI_CARD_PRESENT))
 154                         return;
 155         }
 156
 157         if (host->quirks & SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET)
 158                 ier = sdhci_readl(host, SDHCI_INT_ENABLE);
 159
 160         sdhci_writeb(host, mask, SDHCI_SOFTWARE_RESET);
 161
 162         if (mask & SDHCI_RESET_ALL)
 163                 host->clock = 0;
 164
 165         /* Wait max 100 ms */
 166         timeout = 100;
 167
 168         /* hw clears the bit when it's done */
 169         while (sdhci_readb(host, SDHCI_SOFTWARE_RESET) & mask) {
 170                 if (timeout == 0) {
 171                         printk(KERN_ERR "%s: Reset 0x%x never completed.\n",
 172                                 mmc_hostname(host->mmc), (int)mask);
 173                         sdhci_dumpregs(host);
 174                         return;
 175                 }
 176                 timeout--;
 177                 mdelay(1);
 178         }
 179
 180         if (host->quirks & SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET)
 181                 sdhci_clear_set_irqs(host, SDHCI_INT_ALL_MASK, ier);
 182 }
 183
 184 static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios);
 185
 186 static void sdhci_init(struct sdhci_host *host, int soft)
 187 {
 188         if (soft)
 189                 sdhci_reset(host, SDHCI_RESET_CMD|SDHCI_RESET_DATA);
 190         else
 191                 sdhci_reset(host, SDHCI_RESET_ALL);
 192
 193         sdhci_clear_set_irqs(host, SDHCI_INT_ALL_MASK,
 194                 SDHCI_INT_BUS_POWER | SDHCI_INT_DATA_END_BIT |
 195                 SDHCI_INT_DATA_CRC | SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_INDEX |
 196                 SDHCI_INT_END_BIT | SDHCI_INT_CRC | SDHCI_INT_TIMEOUT |
 197                 SDHCI_INT_DATA_END | SDHCI_INT_RESPONSE);
 198
 199         if (soft) {
 200                 /* force clock reconfiguration */
 201                 host->clock = 0;
 202                 sdhci_set_ios(host->mmc, &host->mmc->ios);
 203         }
 204 }
 205
 206 static void sdhci_reinit(struct sdhci_host *host)
 207 {
 208         sdhci_init(host, 0);
 209         sdhci_enable_card_detection(host);
 210 }
 211
 212 static void sdhci_activate_led(struct sdhci_host *host)
 213 {
 214         u8 ctrl;
 215
 216         ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
 217         ctrl |= SDHCI_CTRL_LED;
 218         sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
 219 }
 220
 221 static void sdhci_deactivate_led(struct sdhci_host *host)
 222 {
 223         u8 ctrl;
 224
 225         ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
 226         ctrl &= ~SDHCI_CTRL_LED;
 227         sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
 228 }
 229
 230 #ifdef SDHCI_USE_LEDS_CLASS
 231 static void sdhci_led_control(struct led_classdev *led,
 232         enum led_brightness brightness)
 233 {
 234         struct sdhci_host *host = container_of(led, struct sdhci_host, led);
 235         unsigned long flags;
 236
 237         spin_lock_irqsave(&host->lock, flags);
 238
 239         if (brightness == LED_OFF)
 240                 sdhci_deactivate_led(host);
 241         else
 242                 sdhci_activate_led(host);
 243
 244         spin_unlock_irqrestore(&host->lock, flags);
 245 }
 246 #endif
 247
 248 /*****************************************************************************\
 249  *                                                                           *
 250  * Core functions                                                            *
 251  *                                                                           *
 252 \*****************************************************************************/
 253
 254 static void sdhci_read_block_pio(struct sdhci_host *host)
 255 {
 256         unsigned long flags;
 257         size_t blksize, len, chunk;
 258         u32 uninitialized_var(scratch);
 259         u8 *buf;
 260
 261         DBG("PIO reading\n");
 262
 263         blksize = host->data->blksz;
 264         chunk = 0;
 265
 266         local_irq_save(flags);
 267
 268         while (blksize) {
 269                 if (!sg_miter_next(&host->sg_miter))
 270                         BUG();
 271
 272                 len = min(host->sg_miter.length, blksize);
 273
 274                 blksize -= len;
 275                 host->sg_miter.consumed = len;
 276
 277                 buf = host->sg_miter.addr;
 278
 279                 while (len) {
 280                         if (chunk == 0) {
 281                                 scratch = sdhci_readl(host, SDHCI_BUFFER);
 282                                 chunk = 4;
 283                         }
 284
 285                         *buf = scratch & 0xFF;
 286
 287                         buf++;
 288                         scratch >>= 8;
 289                         chunk--;
 290                         len--;
 291                 }
 292         }
 293
 294         sg_miter_stop(&host->sg_miter);
 295
 296         local_irq_restore(flags);
 297 }
 298
 299 static void sdhci_write_block_pio(struct sdhci_host *host)
 300 {
 301         unsigned long flags;
 302         size_t blksize, len, chunk;
 303         u32 scratch;
 304         u8 *buf;
 305
 306         DBG("PIO writing\n");
 307
 308         blksize = host->data->blksz;
 309         chunk = 0;
 310         scratch = 0;
 311
 312         local_irq_save(flags);
 313
 314         while (blksize) {
 315                 if (!sg_miter_next(&host->sg_miter))
 316                         BUG();
 317
 318                 len = min(host->sg_miter.length, blksize);
 319
 320                 blksize -= len;
 321                 host->sg_miter.consumed = len;
 322
 323                 buf = host->sg_miter.addr;
 324
 325                 while (len) {
 326                         scratch |= (u32)*buf << (chunk * 8);
 327
 328                         buf++;
 329                         chunk++;
 330                         len--;
 331
 332                         if ((chunk == 4) || ((len == 0) && (blksize == 0))) {
 333                                 sdhci_writel(host, scratch, SDHCI_BUFFER);
 334                                 chunk = 0;
 335                                 scratch = 0;
 336                         }
 337                 }
 338         }
 339
 340         sg_miter_stop(&host->sg_miter);
 341
 342         local_irq_restore(flags);
 343 }
 344
 345 static void sdhci_transfer_pio(struct sdhci_host *host)
 346 {
 347         u32 mask;
 348
 349         BUG_ON(!host->data);
 350
 351         if (host->blocks == 0)
 352                 return;
 353
 354         if (host->data->flags & MMC_DATA_READ)
 355                 mask = SDHCI_DATA_AVAILABLE;
 356         else
 357                 mask = SDHCI_SPACE_AVAILABLE;
 358
 359         /*
 360          * Some controllers (JMicron JMB38x) mess up the buffer bits
 361          * for transfers < 4 bytes. As long as it is just one block,
 362          * we can ignore the bits.
 363          */
 364         if ((host->quirks & SDHCI_QUIRK_BROKEN_SMALL_PIO) &&
 365                 (host->data->blocks == 1))
 366                 mask = ~0;
 367
 368         while (sdhci_readl(host, SDHCI_PRESENT_STATE) & mask) {
 369                 if (host->quirks & SDHCI_QUIRK_PIO_NEEDS_DELAY)
 370                         udelay(100);
 371
 372                 if (host->data->flags & MMC_DATA_READ)
 373                         sdhci_read_block_pio(host);
 374                 else
 375                         sdhci_write_block_pio(host);
 376
 377                 host->blocks--;
 378                 if (host->blocks == 0)
 379                         break;
 380         }
 381
 382         DBG("PIO transfer complete.\n");
 383 }
 384
 385 static char *sdhci_kmap_atomic(struct scatterlist *sg, unsigned long *flags)
 386 {
 387         local_irq_save(*flags);
 388         return kmap_atomic(sg_page(sg), KM_BIO_SRC_IRQ) + sg->offset;
 389 }
 390
 391 static void sdhci_kunmap_atomic(void *buffer, unsigned long *flags)
 392 {
 393         kunmap_atomic(buffer, KM_BIO_SRC_IRQ);
 394         local_irq_restore(*flags);
 395 }
 396
 397 static void sdhci_set_adma_desc(u8 *desc, u32 addr, int len, unsigned cmd)
 398 {
 399         __le32 *dataddr = (__le32 __force *)(desc + 4);
 400         __le16 *cmdlen = (__le16 __force *)desc;
 401
 402         /* SDHCI specification says ADMA descriptors should be 4 byte
 403          * aligned, so using 16 or 32bit operations should be safe. */
 404
 405         cmdlen[0] = cpu_to_le16(cmd);
 406         cmdlen[1] = cpu_to_le16(len);
 407
 408         dataddr[0] = cpu_to_le32(addr);
 409 }
 410
 411 static int sdhci_adma_table_pre(struct sdhci_host *host,
 412         struct mmc_data *data)
 413 {
 414         int direction;
 415
 416         u8 *desc;
 417         u8 *align;
 418         dma_addr_t addr;
 419         dma_addr_t align_addr;
 420         int len, offset;
 421
 422         struct scatterlist *sg;
 423         int i;
 424         char *buffer;
 425         unsigned long flags;
 426
 427         /*
 428          * The spec does not specify endianness of descriptor table.
 429          * We currently guess that it is LE.
 430          */
 431
 432         if (data->flags & MMC_DATA_READ)
 433                 direction = DMA_FROM_DEVICE;
 434         else
 435                 direction = DMA_TO_DEVICE;
 436
 437         /*
 438          * The ADMA descriptor table is mapped further down as we
 439          * need to fill it with data first.
 440          */
 441
 442         host->align_addr = dma_map_single(mmc_dev(host->mmc),
 443                 host->align_buffer, 128 * 4, direction);
 444         if (dma_mapping_error(mmc_dev(host->mmc), host->align_addr))
 445                 goto fail;
 446         BUG_ON(host->align_addr & 0x3);
 447
 448         host->sg_count = dma_map_sg(mmc_dev(host->mmc),
 449                 data->sg, data->sg_len, direction);
 450         if (host->sg_count == 0)
 451                 goto unmap_align;
 452
 453         desc = host->adma_desc;
 454         align = host->align_buffer;
 455
 456         align_addr = host->align_addr;
 457
 458         for_each_sg(data->sg, sg, host->sg_count, i) {
 459                 addr = sg_dma_address(sg);
 460                 len = sg_dma_len(sg);
 461
 462                 /*
 463                  * The SDHCI specification states that ADMA
 464                  * addresses must be 32-bit aligned. If they
 465                  * aren't, then we use a bounce buffer for
 466                  * the (up to three) bytes that screw up the
 467                  * alignment.
 468                  */
 469                 offset = (4 - (addr & 0x3)) & 0x3;
 470                 if (offset) {
 471                         if (data->flags & MMC_DATA_WRITE) {
 472                                 buffer = sdhci_kmap_atomic(sg, &flags);
 473                                 WARN_ON(((long)buffer & PAGE_MASK) > (PAGE_SIZE - 3));
 474                                 memcpy(align, buffer, offset);
 475                                 sdhci_kunmap_atomic(buffer, &flags);
 476                         }
 477
 478                         /* tran, valid */
 479                         sdhci_set_adma_desc(desc, align_addr, offset, 0x21);
 480
 481                         BUG_ON(offset > 65536);
 482
 483                         align += 4;
 484                         align_addr += 4;
 485
 486                         desc += 8;
 487
 488                         addr += offset;
 489                         len -= offset;
 490                 }
 491
 492                 BUG_ON(len > 65536);
 493
 494                 /* tran, valid */
 495                 sdhci_set_adma_desc(desc, addr, len, 0x21);
 496                 desc += 8;
 497
 498                 /*
 499                  * If this triggers then we have a calculation bug
 500                  * somewhere. :/
 501                  */
 502                 WARN_ON((desc - host->adma_desc) > (128 * 2 + 1) * 4);
 503         }
 504
 505         if (host->quirks & SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC) {
 506                 /*
 507                 * Mark the last descriptor as the terminating descriptor
 508                 */
 509                 if (desc != host->adma_desc) {
 510                         desc -= 8;
 511                         desc[0] |= 0x2; /* end */
 512                 }
 513         } else {
 514                 /*
 515                 * Add a terminating entry.
 516                 */
 517
 518                 /* nop, end, valid */
 519                 sdhci_set_adma_desc(desc, 0, 0, 0x3);
 520         }
 521
 522         /*
 523          * Resync align buffer as we might have changed it.
 524          */
 525         if (data->flags & MMC_DATA_WRITE) {
 526                 dma_sync_single_for_device(mmc_dev(host->mmc),
 527                         host->align_addr, 128 * 4, direction);
 528         }
 529
 530         host->adma_addr = dma_map_single(mmc_dev(host->mmc),
 531                 host->adma_desc, (128 * 2 + 1) * 4, DMA_TO_DEVICE);
 532         if (dma_mapping_error(mmc_dev(host->mmc), host->adma_addr))
 533                 goto unmap_entries;
 534         BUG_ON(host->adma_addr & 0x3);
 535
 536         return 0;
 537
 538 unmap_entries:
 539         dma_unmap_sg(mmc_dev(host->mmc), data->sg,
 540                 data->sg_len, direction);
 541 unmap_align:
 542         dma_unmap_single(mmc_dev(host->mmc), host->align_addr,
 543                 128 * 4, direction);
 544 fail:
 545         return -EINVAL;
 546 }
 547
 548 static void sdhci_adma_table_post(struct sdhci_host *host,
 549         struct mmc_data *data)
 550 {
 551         int direction;
 552
 553         struct scatterlist *sg;
 554         int i, size;
 555         u8 *align;
 556         char *buffer;
 557         unsigned long flags;
 558
 559         if (data->flags & MMC_DATA_READ)
 560                 direction = DMA_FROM_DEVICE;
 561         else
 562                 direction = DMA_TO_DEVICE;
 563
 564         dma_unmap_single(mmc_dev(host->mmc), host->adma_addr,
 565                 (128 * 2 + 1) * 4, DMA_TO_DEVICE);
 566
 567         dma_unmap_single(mmc_dev(host->mmc), host->align_addr,
 568                 128 * 4, direction);
 569
 570         if (data->flags & MMC_DATA_READ) {
 571                 dma_sync_sg_for_cpu(mmc_dev(host->mmc), data->sg,
 572                         data->sg_len, direction);
 573
 574                 align = host->align_buffer;
 575
 576                 for_each_sg(data->sg, sg, host->sg_count, i) {
 577                         if (sg_dma_address(sg) & 0x3) {
 578                                 size = 4 - (sg_dma_address(sg) & 0x3);
 579
 580                                 buffer = sdhci_kmap_atomic(sg, &flags);
 581                                 WARN_ON(((long)buffer & PAGE_MASK) > (PAGE_SIZE - 3));
 582                                 memcpy(buffer, align, size);
 583                                 sdhci_kunmap_atomic(buffer, &flags);
 584
 585                                 align += 4;
 586                         }
 587                 }
 588         }
 589
 590         dma_unmap_sg(mmc_dev(host->mmc), data->sg,
 591                 data->sg_len, direction);
 592 }
 593
 594 static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_data *data)
 595 {
 596         u8 count;
 597         unsigned target_timeout, current_timeout;
 598
 599         /*
 600          * If the host controller provides us with an incorrect timeout
 601          * value, just skip the check and use 0xE.  The hardware may take
 602          * longer to time out, but that's much better than having a too-short
 603          * timeout value.
 604          */
 605         if (host->quirks & SDHCI_QUIRK_BROKEN_TIMEOUT_VAL)
 606                 return 0xE;
 607
 608         /* timeout in us */
 609         target_timeout = data->timeout_ns / 1000 +
 610                 data->timeout_clks / host->clock;
 611
 612         if (host->quirks & SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)
 613                 host->timeout_clk = host->clock / 1000;
 614
 615         /*
 616          * Figure out needed cycles.
 617          * We do this in steps in order to fit inside a 32 bit int.
 618          * The first step is the minimum timeout, which will have a
 619          * minimum resolution of 6 bits:
 620          * (1) 2^13*1000 > 2^22,
 621          * (2) host->timeout_clk < 2^16
 622          *     =>
 623          *     (1) / (2) > 2^6
 624          */
 625         count = 0;
 626         current_timeout = (1 << 13) * 1000 / host->timeout_clk;
 627         while (current_timeout < target_timeout) {
 628                 count++;
 629                 current_timeout <<= 1;
 630                 if (count >= 0xF)
 631                         break;
 632         }
 633
 634         if (count >= 0xF) {
 635                 printk(KERN_WARNING "%s: Too large timeout requested!\n",
 636                         mmc_hostname(host->mmc));
 637                 count = 0xE;
 638         }
 639
 640         return count;
 641 }
 642
 643 static void sdhci_set_transfer_irqs(struct sdhci_host *host)
 644 {
 645         u32 pio_irqs = SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL;
 646         u32 dma_irqs = SDHCI_INT_DMA_END | SDHCI_INT_ADMA_ERROR;
 647
 648         if (host->flags & SDHCI_REQ_USE_DMA)
 649                 sdhci_clear_set_irqs(host, pio_irqs, dma_irqs);
 650         else
 651                 sdhci_clear_set_irqs(host, dma_irqs, pio_irqs);
 652 }
 653
 654 static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data)
 655 {
 656         u8 count;
 657         u8 ctrl;
 658         int ret;
 659
 660         WARN_ON(host->data);
 661
 662         if (data == NULL)
 663                 return;
 664
 665         /* Sanity checks */
 666         BUG_ON(data->blksz * data->blocks > 524288);
 667         BUG_ON(data->blksz > host->mmc->max_blk_size);
 668         BUG_ON(data->blocks > 65535);
 669
 670         host->data = data;
 671         host->data_early = 0;
 672
 673         count = sdhci_calc_timeout(host, data);
 674         sdhci_writeb(host, count, SDHCI_TIMEOUT_CONTROL);
 675
 676         if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA))
 677                 host->flags |= SDHCI_REQ_USE_DMA;
 678
 679         /*
 680          * FIXME: This doesn't account for merging when mapping the
 681          * scatterlist.
 682          */
 683         if (host->flags & SDHCI_REQ_USE_DMA) {
 684                 int broken, i;
 685                 struct scatterlist *sg;
 686
 687                 broken = 0;
 688                 if (host->flags & SDHCI_USE_ADMA) {
 689                         if (host->quirks & SDHCI_QUIRK_32BIT_ADMA_SIZE)
 690                                 broken = 1;
 691                 } else {
 692                         if (host->quirks & SDHCI_QUIRK_32BIT_DMA_SIZE)
 693                                 broken = 1;
 694                 }
 695
 696                 if (unlikely(broken)) {
 697                         for_each_sg(data->sg, sg, data->sg_len, i) {
 698                                 if (sg->length & 0x3) {
 699                                         DBG("Reverting to PIO because of "
 700                                                 "transfer size (%d)\n",
 701                                                 sg->length);
 702                                         host->flags &= ~SDHCI_REQ_USE_DMA;
 703                                         break;
 704                                 }
 705                         }
 706                 }
 707         }
 708
 709         /*
 710          * The assumption here being that alignment is the same after
 711          * translation to device address space.
 712          */
 713         if (host->flags & SDHCI_REQ_USE_DMA) {
 714                 int broken, i;
 715                 struct scatterlist *sg;
 716
 717                 broken = 0;
 718                 if (host->flags & SDHCI_USE_ADMA) {
 719                         /*
 720                          * As we use 3 byte chunks to work around
 721                          * alignment problems, we need to check this
 722                          * quirk.
 723                          */
 724                         if (host->quirks & SDHCI_QUIRK_32BIT_ADMA_SIZE)
 725                                 broken = 1;
 726                 } else {
 727                         if (host->quirks & SDHCI_QUIRK_32BIT_DMA_ADDR)
 728                                 broken = 1;
 729                 }
 730
 731                 if (unlikely(broken)) {
 732                         for_each_sg(data->sg, sg, data->sg_len, i) {
 733                                 if (sg->offset & 0x3) {
 734                                         DBG("Reverting to PIO because of "
 735                                                 "bad alignment\n");
 736                                         host->flags &= ~SDHCI_REQ_USE_DMA;
 737                                         break;
 738                                 }
 739                         }
 740                 }
 741         }
 742
 743         if (host->flags & SDHCI_REQ_USE_DMA) {
 744                 if (host->flags & SDHCI_USE_ADMA) {
 745                         ret = sdhci_adma_table_pre(host, data);
 746                         if (ret) {
 747                                 /*
 748                                  * This only happens when someone fed
 749                                  * us an invalid request.
 750                                  */
 751                                 WARN_ON(1);
 752                                 host->flags &= ~SDHCI_REQ_USE_DMA;
 753                         } else {
 754                                 sdhci_writel(host, host->adma_addr,
 755                                         SDHCI_ADMA_ADDRESS);
 756                         }
 757                 } else {
 758                         int sg_cnt;
 759
 760                         sg_cnt = dma_map_sg(mmc_dev(host->mmc),
 761                                         data->sg, data->sg_len,
 762                                         (data->flags & MMC_DATA_READ) ?
 763                                                 DMA_FROM_DEVICE :
 764                                                 DMA_TO_DEVICE);
 765                         if (sg_cnt == 0) {
 766                                 /*
 767                                  * This only happens when someone fed
 768                                  * us an invalid request.
 769                                  */
 770                                 WARN_ON(1);
 771                                 host->flags &= ~SDHCI_REQ_USE_DMA;
 772                         } else {
 773                                 WARN_ON(sg_cnt != 1);
 774                                 sdhci_writel(host, sg_dma_address(data->sg),
 775                                         SDHCI_DMA_ADDRESS);
 776                         }
 777                 }
 778         }
 779
 780         /*
 781          * Always adjust the DMA selection as some controllers
 782          * (e.g. JMicron) can't do PIO properly when the selection
 783          * is ADMA.
 784          */
 785         if (host->version >= SDHCI_SPEC_200) {
 786                 ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
 787                 ctrl &= ~SDHCI_CTRL_DMA_MASK;
 788                 if ((host->flags & SDHCI_REQ_USE_DMA) &&
 789                         (host->flags & SDHCI_USE_ADMA))
 790                         ctrl |= SDHCI_CTRL_ADMA32;
 791                 else
 792                         ctrl |= SDHCI_CTRL_SDMA;
 793                 sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
 794         }
 795
 796         if (!(host->flags & SDHCI_REQ_USE_DMA)) {
 797                 int flags;
 798
 799                 flags = SG_MITER_ATOMIC;
 800                 if (host->data->flags & MMC_DATA_READ)
 801                         flags |= SG_MITER_TO_SG;
 802                 else
 803                         flags |= SG_MITER_FROM_SG;
 804                 sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags);
 805                 host->blocks = data->blocks;
 806         }
 807
 808         sdhci_set_transfer_irqs(host);
 809
 810         /* We do not handle DMA boundaries, so set it to max (512 KiB) */
 811         sdhci_writew(host, SDHCI_MAKE_BLKSZ(7, data->blksz), SDHCI_BLOCK_SIZE);
 812         sdhci_writew(host, data->blocks, SDHCI_BLOCK_COUNT);
 813 }
 814
 815 static void sdhci_set_transfer_mode(struct sdhci_host *host,
 816         struct mmc_data *data)
 817 {
 818         u16 mode;
 819
 820         if (data == NULL)
 821                 return;
 822
 823         WARN_ON(!host->data);
 824
 825         mode = SDHCI_TRNS_BLK_CNT_EN;
 826         if (data->blocks > 1) {
 827                 if (host->quirks & SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12)
 828                         mode |= SDHCI_TRNS_MULTI | SDHCI_TRNS_ACMD12;
 829                 else
 830                         mode |= SDHCI_TRNS_MULTI;
 831         }
 832         if (data->flags & MMC_DATA_READ)
 833                 mode |= SDHCI_TRNS_READ;
 834         if (host->flags & SDHCI_REQ_USE_DMA)
 835                 mode |= SDHCI_TRNS_DMA;
 836
 837         sdhci_writew(host, mode, SDHCI_TRANSFER_MODE);
 838 }
 839
 840 static void sdhci_finish_data(struct sdhci_host *host)
 841 {
 842         struct mmc_data *data;
 843
 844         BUG_ON(!host->data);
 845
 846         data = host->data;
 847         host->data = NULL;
 848
 849         if (host->flags & SDHCI_REQ_USE_DMA) {
 850                 if (host->flags & SDHCI_USE_ADMA)
 851                         sdhci_adma_table_post(host, data);
 852                 else {
 853                         dma_unmap_sg(mmc_dev(host->mmc), data->sg,
 854                                 data->sg_len, (data->flags & MMC_DATA_READ) ?
 855                                         DMA_FROM_DEVICE : DMA_TO_DEVICE);
 856                 }
 857         }
 858
 859         /*
 860          * The specification states that the block count register must
 861          * be updated, but it does not specify at what point in the
 862          * data flow. That makes the register entirely useless to read
 863          * back so we have to assume that nothing made it to the card
 864          * in the event of an error.
 865          */
 866         if (data->error)
 867                 data->bytes_xfered = 0;
 868         else
 869                 data->bytes_xfered = data->blksz * data->blocks;
 870
 871         if (data->stop) {
 872                 /*
 873                  * The controller needs a reset of internal state machines
 874                  * upon error conditions.
 875                  */
 876                 if (data->error) {
 877                         sdhci_reset(host, SDHCI_RESET_CMD);
 878                         sdhci_reset(host, SDHCI_RESET_DATA);
 879                 }
 880
 881                 sdhci_send_command(host, data->stop);
 882         } else
 883                 tasklet_schedule(&host->finish_tasklet);
 884 }
 885
 886 static void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
 887 {
 888         int flags;
 889         u32 mask;
 890         unsigned long timeout;
 891
 892         WARN_ON(host->cmd);
 893
 894         /* Wait max 10 ms */
 895         timeout = 10;
 896
 897         mask = SDHCI_CMD_INHIBIT;
 898         if ((cmd->data != NULL) || (cmd->flags & MMC_RSP_BUSY))
 899                 mask |= SDHCI_DATA_INHIBIT;
 900
 901         /* We shouldn't wait for data inihibit for stop commands, even
 902            though they might use busy signaling */
 903         if (host->mrq->data && (cmd == host->mrq->data->stop))
 904                 mask &= ~SDHCI_DATA_INHIBIT;
 905
 906         while (sdhci_readl(host, SDHCI_PRESENT_STATE) & mask) {
 907                 if (timeout == 0) {
 908                         printk(KERN_ERR "%s: Controller never released "
 909                                 "inhibit bit(s).\n", mmc_hostname(host->mmc));
 910                         sdhci_dumpregs(host);
 911                         cmd->error = -EIO;
 912                         tasklet_schedule(&host->finish_tasklet);
 913                         return;
 914                 }
 915                 timeout--;
 916                 mdelay(1);
 917         }
 918
 919         mod_timer(&host->timer, jiffies + 10 * HZ);
 920
 921         host->cmd = cmd;
 922
 923         sdhci_prepare_data(host, cmd->data);
 924
 925         sdhci_writel(host, cmd->arg, SDHCI_ARGUMENT);
 926
 927         sdhci_set_transfer_mode(host, cmd->data);
 928
 929         if ((cmd->flags & MMC_RSP_136) && (cmd->flags & MMC_RSP_BUSY)) {
 930                 printk(KERN_ERR "%s: Unsupported response type!\n",
 931                         mmc_hostname(host->mmc));
 932                 cmd->error = -EINVAL;
 933                 tasklet_schedule(&host->finish_tasklet);
 934                 return;
 935         }
 936
 937         if (!(cmd->flags & MMC_RSP_PRESENT))
 938                 flags = SDHCI_CMD_RESP_NONE;
 939         else if (cmd->flags & MMC_RSP_136)
 940                 flags = SDHCI_CMD_RESP_LONG;
 941         else if (cmd->flags & MMC_RSP_BUSY)
 942                 flags = SDHCI_CMD_RESP_SHORT_BUSY;
 943         else
 944                 flags = SDHCI_CMD_RESP_SHORT;
 945
 946         if (cmd->flags & MMC_RSP_CRC)
 947                 flags |= SDHCI_CMD_CRC;
 948         if (cmd->flags & MMC_RSP_OPCODE)
 949                 flags |= SDHCI_CMD_INDEX;
 950         if (cmd->data)
 951                 flags |= SDHCI_CMD_DATA;
 952
 953         sdhci_writew(host, SDHCI_MAKE_CMD(cmd->opcode, flags), SDHCI_COMMAND);
 954 }
 955
 956 static void sdhci_finish_command(struct sdhci_host *host)
 957 {
 958         int i;
 959
 960         BUG_ON(host->cmd == NULL);
 961
 962         if (host->cmd->flags & MMC_RSP_PRESENT) {
 963                 if (host->cmd->flags & MMC_RSP_136) {
 964                         /* CRC is stripped so we need to do some shifting. */
 965                         for (i = 0;i < 4;i++) {
 966                                 host->cmd->resp[i] = sdhci_readl(host,
 967                                         SDHCI_RESPONSE + (3-i)*4) << 8;
 968                                 if (i != 3)
 969                                         host->cmd->resp[i] |=
 970                                                 sdhci_readb(host,
 971                                                 SDHCI_RESPONSE + (3-i)*4-1);
 972                         }
 973                 } else {
 974                         host->cmd->resp[0] = sdhci_readl(host, SDHCI_RESPONSE);
 975                 }
 976         }
 977
 978         host->cmd->error = 0;
 979
 980         if (host->data && host->data_early)
 981                 sdhci_finish_data(host);
 982
 983         if (!host->cmd->data)
 984                 tasklet_schedule(&host->finish_tasklet);
 985
 986         host->cmd = NULL;
 987 }
 988
 989 static void sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
 990 {
 991         int div;
 992         u16 clk;
 993         unsigned long timeout;
 994
 995         if (clock == host->clock)
 996                 return;
 997
 998         if (host->ops->set_clock) {
 999                 host->ops->set_clock(host, clock);
1000                 if (host->quirks & SDHCI_QUIRK_NONSTANDARD_CLOCK)
1001                         return;
1002         }
1003
1004         sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
1005
1006         if (clock == 0)
1007                 goto out;
1008
1009         if (host->version >= SDHCI_SPEC_300) {
1010                 /* Version 3.00 divisors must be a multiple of 2. */
1011                 if (host->max_clk <= clock)
1012                         div = 1;
1013                 else {
1014                         for (div = 2; div < SDHCI_MAX_DIV_SPEC_300; div += 2) {
1015                                 if ((host->max_clk / div) <= clock)
1016                                         break;
1017                         }
1018                 }
1019         } else {
1020                 /* Version 2.00 divisors must be a power of 2. */
1021                 for (div = 1; div < SDHCI_MAX_DIV_SPEC_200; div *= 2) {
1022                         if ((host->max_clk / div) <= clock)
1023                                 break;
1024                 }
1025         }
1026         div >>= 1;
1027
1028         clk = (div & SDHCI_DIV_MASK) << SDHCI_DIVIDER_SHIFT;
1029         clk |= ((div & SDHCI_DIV_HI_MASK) >> SDHCI_DIV_MASK_LEN)
1030                 << SDHCI_DIVIDER_HI_SHIFT;
1031         clk |= SDHCI_CLOCK_INT_EN;
1032         sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
1033
1034         /* Wait max 20 ms */
1035         timeout = 20;
1036         while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
1037                 & SDHCI_CLOCK_INT_STABLE)) {
1038                 if (timeout == 0) {
1039                         printk(KERN_ERR "%s: Internal clock never "
1040                                 "stabilised.\n", mmc_hostname(host->mmc));
1041                         sdhci_dumpregs(host);
1042                         return;
1043                 }
1044                 timeout--;
1045                 mdelay(1);
1046         }
1047
1048         clk |= SDHCI_CLOCK_CARD_EN;
1049         sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
1050
1051 out:
1052         host->clock = clock;
1053 }
1054
1055 static void sdhci_set_power(struct sdhci_host *host, unsigned short power)
1056 {
1057         u8 pwr = 0;
1058
1059         if (power != (unsigned short)-1) {
1060                 switch (1 << power) {
1061                 case MMC_VDD_165_195:
1062                         pwr = SDHCI_POWER_180;
1063                         break;
1064                 case MMC_VDD_29_30:
1065                 case MMC_VDD_30_31:
1066                         pwr = SDHCI_POWER_300;
1067                         break;
1068                 case MMC_VDD_32_33:
1069                 case MMC_VDD_33_34:
1070                         pwr = SDHCI_POWER_330;
1071                         break;
1072                 default:
1073                         BUG();
1074                 }
1075         }
1076
1077         if (host->pwr == pwr)
1078                 return;
1079
1080         host->pwr = pwr;
1081
1082         if (pwr == 0) {
1083                 sdhci_writeb(host, 0, SDHCI_POWER_CONTROL);
1084                 return;
1085         }
1086
1087         /*
1088          * Spec says that we should clear the power reg before setting
1089          * a new value. Some controllers don't seem to like this though.
1090          */
1091         if (!(host->quirks & SDHCI_QUIRK_SINGLE_POWER_WRITE))
1092                 sdhci_writeb(host, 0, SDHCI_POWER_CONTROL);
1093
1094         /*
1095          * At least the Marvell CaFe chip gets confused if we set the voltage
1096          * and set turn on power at the same time, so set the voltage first.
1097          */
1098         if (host->quirks & SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER)
1099                 sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
1100
1101         pwr |= SDHCI_POWER_ON;
1102
1103         sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
1104
1105         /*
1106          * Some controllers need an extra 10ms delay of 10ms before they
1107          * can apply clock after applying power
1108          */
1109         if (host->quirks & SDHCI_QUIRK_DELAY_AFTER_POWER)
1110                 mdelay(10);
1111 }
1112
1113 /*****************************************************************************\
1114  *                                                                           *
1115  * MMC callbacks                                                             *
1116  *                                                                           *
1117 \*****************************************************************************/
1118
1119 static void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq)
1120 {
1121         struct sdhci_host *host;
1122         bool present;
1123         unsigned long flags;
1124
1125         host = mmc_priv(mmc);
1126
1127         spin_lock_irqsave(&host->lock, flags);
1128
1129         WARN_ON(host->mrq != NULL);
1130
1131 #ifndef SDHCI_USE_LEDS_CLASS
1132         sdhci_activate_led(host);
1133 #endif
1134         if (host->quirks & SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12) {
1135                 if (mrq->stop) {
1136                         mrq->data->stop = NULL;
1137                         mrq->stop = NULL;
1138                 }
1139         }
1140
1141         host->mrq = mrq;
1142
1143         /* If polling, assume that the card is always present. */
1144         if (host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION)
1145                 present = true;
1146         else
1147                 present = sdhci_readl(host, SDHCI_PRESENT_STATE) &
1148                                 SDHCI_CARD_PRESENT;
1149
1150         if (!present || host->flags & SDHCI_DEVICE_DEAD) {
1151                 host->mrq->cmd->error = -ENOMEDIUM;
1152                 tasklet_schedule(&host->finish_tasklet);
1153         } else
1154                 sdhci_send_command(host, mrq->cmd);
1155
1156         mmiowb();
1157         spin_unlock_irqrestore(&host->lock, flags);
1158 }
1159
1160 static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
1161 {
1162         struct sdhci_host *host;
1163         unsigned long flags;
1164         u8 ctrl;
1165
1166         host = mmc_priv(mmc);
1167
1168         spin_lock_irqsave(&host->lock, flags);
1169
1170         if (host->flags & SDHCI_DEVICE_DEAD)
1171                 goto out;
1172
1173         /*
1174          * Reset the chip on each power off.
1175          * Should clear out any weird states.
1176          */
1177         if (ios->power_mode == MMC_POWER_OFF) {
1178                 sdhci_writel(host, 0, SDHCI_SIGNAL_ENABLE);
1179                 sdhci_reinit(host);
1180         }
1181
1182         sdhci_set_clock(host, ios->clock);
1183
1184         if (ios->power_mode == MMC_POWER_OFF)
1185                 sdhci_set_power(host, -1);
1186         else
1187                 sdhci_set_power(host, ios->vdd);
1188
1189         if (host->ops->platform_send_init_74_clocks)
1190                 host->ops->platform_send_init_74_clocks(host, ios->power_mode);
1191
1192         /*
1193          * If your platform has 8-bit width support but is not a v3 controller,
1194          * or if it requires special setup code, you should implement that in
1195          * platform_8bit_width().
1196          */
1197         if (host->ops->platform_8bit_width)
1198                 host->ops->platform_8bit_width(host, ios->bus_width);
1199         else {
1200                 ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
1201                 if (ios->bus_width == MMC_BUS_WIDTH_8) {
1202                         ctrl &= ~SDHCI_CTRL_4BITBUS;
1203                         if (host->version >= SDHCI_SPEC_300)
1204                                 ctrl |= SDHCI_CTRL_8BITBUS;
1205                 } else {
1206                         if (host->version >= SDHCI_SPEC_300)
1207                                 ctrl &= ~SDHCI_CTRL_8BITBUS;
1208                         if (ios->bus_width == MMC_BUS_WIDTH_4)
1209                                 ctrl |= SDHCI_CTRL_4BITBUS;
1210                         else
1211                                 ctrl &= ~SDHCI_CTRL_4BITBUS;
1212                 }
1213                 sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
1214         }
1215
1216         ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
1217
1218         if ((ios->timing == MMC_TIMING_SD_HS ||
1219              ios->timing == MMC_TIMING_MMC_HS)
1220             && !(host->quirks & SDHCI_QUIRK_NO_HISPD_BIT))
1221                 ctrl |= SDHCI_CTRL_HISPD;
1222         else
1223                 ctrl &= ~SDHCI_CTRL_HISPD;
1224
1225         sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
1226
1227         /*
1228          * Some (ENE) controllers go apeshit on some ios operation,
1229          * signalling timeout and CRC errors even on CMD0. Resetting
1230          * it on each ios seems to solve the problem.
1231          */
1232         if(host->quirks & SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS)
1233                 sdhci_reset(host, SDHCI_RESET_CMD | SDHCI_RESET_DATA);
1234
1235 out:
1236         mmiowb();
1237         spin_unlock_irqrestore(&host->lock, flags);
1238 }
1239
1240 static int sdhci_get_ro(struct mmc_host *mmc)
1241 {
1242         struct sdhci_host *host;
1243         unsigned long flags;
1244         int is_readonly;
1245
1246         host = mmc_priv(mmc);
1247
1248         spin_lock_irqsave(&host->lock, flags);
1249
1250         if (host->flags & SDHCI_DEVICE_DEAD)
1251                 is_readonly = 0;
1252         else if (host->ops->get_ro)
1253                 is_readonly = host->ops->get_ro(host);
1254         else
1255                 is_readonly = !(sdhci_readl(host, SDHCI_PRESENT_STATE)
1256                                 & SDHCI_WRITE_PROTECT);
1257
1258         spin_unlock_irqrestore(&host->lock, flags);
1259
1260         /* This quirk needs to be replaced by a callback-function later */
1261         return host->quirks & SDHCI_QUIRK_INVERTED_WRITE_PROTECT ?
1262                 !is_readonly : is_readonly;
1263 }
1264
1265 static void sdhci_enable_sdio_irq(struct mmc_host *mmc, int enable)
1266 {
1267         struct sdhci_host *host;
1268         unsigned long flags;
1269
1270         host = mmc_priv(mmc);
1271
1272         spin_lock_irqsave(&host->lock, flags);
1273
1274         if (host->flags & SDHCI_DEVICE_DEAD)
1275                 goto out;
1276
1277         if (enable)
1278                 sdhci_unmask_irqs(host, SDHCI_INT_CARD_INT);
1279         else
1280                 sdhci_mask_irqs(host, SDHCI_INT_CARD_INT);
1281 out:
1282         mmiowb();
1283
1284         spin_unlock_irqrestore(&host->lock, flags);
1285 }
1286
1287 static const struct mmc_host_ops sdhci_ops = {
1288         .request        = sdhci_request,
1289         .set_ios        = sdhci_set_ios,
1290         .get_ro         = sdhci_get_ro,
1291         .enable_sdio_irq = sdhci_enable_sdio_irq,
1292 };
1293
1294 /*****************************************************************************\
1295  *                                                                           *
1296  * Tasklets                                                                  *
1297  *                                                                           *
1298 \*****************************************************************************/
1299
1300 static void sdhci_tasklet_card(unsigned long param)
1301 {
1302         struct sdhci_host *host;
1303         unsigned long flags;
1304
1305         host = (struct sdhci_host*)param;
1306
1307         spin_lock_irqsave(&host->lock, flags);
1308
1309         if (!(sdhci_readl(host, SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT)) {
1310                 if (host->mrq) {
1311                         printk(KERN_ERR "%s: Card removed during transfer!\n",
1312                                 mmc_hostname(host->mmc));
1313                         printk(KERN_ERR "%s: Resetting controller.\n",
1314                                 mmc_hostname(host->mmc));
1315
1316                         sdhci_reset(host, SDHCI_RESET_CMD);
1317                         sdhci_reset(host, SDHCI_RESET_DATA);
1318
1319                         host->mrq->cmd->error = -ENOMEDIUM;
1320                         tasklet_schedule(&host->finish_tasklet);
1321                 }
1322         }
1323
1324         spin_unlock_irqrestore(&host->lock, flags);
1325
1326         mmc_detect_change(host->mmc, msecs_to_jiffies(200));
1327 }
1328
1329 static void sdhci_tasklet_finish(unsigned long param)
1330 {
1331         struct sdhci_host *host;
1332         unsigned long flags;
1333         struct mmc_request *mrq;
1334
1335         host = (struct sdhci_host*)param;
1336
1337         /*
1338          * If this tasklet gets rescheduled while running, it will
1339          * be run again afterwards but without any active request.
1340          */
1341         if (!host->mrq)
1342                 return;
1343
1344         spin_lock_irqsave(&host->lock, flags);
1345
1346         del_timer(&host->timer);
1347
1348         mrq = host->mrq;
1349
1350         /*
1351          * The controller needs a reset of internal state machines
1352          * upon error conditions.
1353          */
1354         if (!(host->flags & SDHCI_DEVICE_DEAD) &&
1355             ((mrq->cmd && mrq->cmd->error) ||
1356                  (mrq->data && (mrq->data->error ||
1357                   (mrq->data->stop && mrq->data->stop->error))) ||
1358                    (host->quirks & SDHCI_QUIRK_RESET_AFTER_REQUEST))) {
1359
1360                 /* Some controllers need this kick or reset won't work here */
1361                 if (host->quirks & SDHCI_QUIRK_CLOCK_BEFORE_RESET) {
1362                         unsigned int clock;
1363
1364                         /* This is to force an update */
1365                         clock = host->clock;
1366                         host->clock = 0;
1367                         sdhci_set_clock(host, clock);
1368                 }
1369
1370                 /* Spec says we should do both at the same time, but Ricoh
1371                    controllers do not like that. */
1372                 sdhci_reset(host, SDHCI_RESET_CMD);
1373                 sdhci_reset(host, SDHCI_RESET_DATA);
1374         }
1375
1376         host->mrq = NULL;
1377         host->cmd = NULL;
1378         host->data = NULL;
1379
1380 #ifndef SDHCI_USE_LEDS_CLASS
1381         sdhci_deactivate_led(host);
1382 #endif
1383
1384         mmiowb();
1385         spin_unlock_irqrestore(&host->lock, flags);
1386
1387         mmc_request_done(host->mmc, mrq);
1388 }
1389
1390 static void sdhci_timeout_timer(unsigned long data)
1391 {
1392         struct sdhci_host *host;
1393         unsigned long flags;
1394
1395         host = (struct sdhci_host*)data;
1396
1397         spin_lock_irqsave(&host->lock, flags);
1398
1399         if (host->mrq) {
1400                 printk(KERN_ERR "%s: Timeout waiting for hardware "
1401                         "interrupt.\n", mmc_hostname(host->mmc));
1402                 sdhci_dumpregs(host);
1403
1404                 if (host->data) {
1405                         host->data->error = -ETIMEDOUT;
1406                         sdhci_finish_data(host);
1407                 } else {
1408                         if (host->cmd)
1409                                 host->cmd->error = -ETIMEDOUT;
1410                         else
1411                                 host->mrq->cmd->error = -ETIMEDOUT;
1412
1413                         tasklet_schedule(&host->finish_tasklet);
1414                 }
1415         }
1416
1417         mmiowb();
1418         spin_unlock_irqrestore(&host->lock, flags);
1419 }
1420
1421 /*****************************************************************************\
1422  *                                                                           *
1423  * Interrupt handling                                                        *
1424  *                                                                           *
1425 \*****************************************************************************/
1426
1427 static void sdhci_cmd_irq(struct sdhci_host *host, u32 intmask)
1428 {
1429         BUG_ON(intmask == 0);
1430
1431         if (!host->cmd) {
1432                 printk(KERN_ERR "%s: Got command interrupt 0x%08x even "
1433                         "though no command operation was in progress.\n",
1434                         mmc_hostname(host->mmc), (unsigned)intmask);
1435                 sdhci_dumpregs(host);
1436                 return;
1437         }
1438
1439         if (intmask & SDHCI_INT_TIMEOUT)
1440                 host->cmd->error = -ETIMEDOUT;
1441         else if (intmask & (SDHCI_INT_CRC | SDHCI_INT_END_BIT |
1442                         SDHCI_INT_INDEX))
1443                 host->cmd->error = -EILSEQ;
1444
1445         if (host->cmd->error) {
1446                 tasklet_schedule(&host->finish_tasklet);
1447                 return;
1448         }
1449
1450         /*
1451          * The host can send and interrupt when the busy state has
1452          * ended, allowing us to wait without wasting CPU cycles.
1453          * Unfortunately this is overloaded on the "data complete"
1454          * interrupt, so we need to take some care when handling
1455          * it.
1456          *
1457          * Note: The 1.0 specification is a bit ambiguous about this
1458          *       feature so there might be some problems with older
1459          *       controllers.
1460          */
1461         if (host->cmd->flags & MMC_RSP_BUSY) {
1462                 if (host->cmd->data)
1463                         DBG("Cannot wait for busy signal when also "
1464                                 "doing a data transfer");
1465                 else if (!(host->quirks & SDHCI_QUIRK_NO_BUSY_IRQ))
1466                         return;
1467
1468                 /* The controller does not support the end-of-busy IRQ,
1469                  * fall through and take the SDHCI_INT_RESPONSE */
1470         }
1471
1472         if (intmask & SDHCI_INT_RESPONSE)
1473                 sdhci_finish_command(host);
1474 }
1475
1476 #ifdef CONFIG_MMC_DEBUG
1477 static void sdhci_show_adma_error(struct sdhci_host *host)
1478 {
1479         const char *name = mmc_hostname(host->mmc);
1480         u8 *desc = host->adma_desc;
1481         __le32 *dma;
1482         __le16 *len;
1483         u8 attr;
1484
1485         sdhci_dumpregs(host);
1486
1487         while (true) {
1488                 dma = (__le32 *)(desc + 4);
1489                 len = (__le16 *)(desc + 2);
1490                 attr = *desc;
1491
1492                 DBG("%s: %p: DMA 0x%08x, LEN 0x%04x, Attr=0x%02x\n",
1493                     name, desc, le32_to_cpu(*dma), le16_to_cpu(*len), attr);
1494
1495                 desc += 8;
1496
1497                 if (attr & 2)
1498                         break;
1499         }
1500 }
1501 #else
1502 static void sdhci_show_adma_error(struct sdhci_host *host) { }
1503 #endif
1504
1505 static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
1506 {
1507         BUG_ON(intmask == 0);
1508
1509         if (!host->data) {
1510                 /*
1511                  * The "data complete" interrupt is also used to
1512                  * indicate that a busy state has ended. See comment
1513                  * above in sdhci_cmd_irq().
1514                  */
1515                 if (host->cmd && (host->cmd->flags & MMC_RSP_BUSY)) {
1516                         if (intmask & SDHCI_INT_DATA_END) {
1517                                 sdhci_finish_command(host);
1518                                 return;
1519                         }
1520                 }
1521
1522                 printk(KERN_ERR "%s: Got data interrupt 0x%08x even "
1523                         "though no data operation was in progress.\n",
1524                         mmc_hostname(host->mmc), (unsigned)intmask);
1525                 sdhci_dumpregs(host);
1526
1527                 return;
1528         }
1529
1530         if (intmask & SDHCI_INT_DATA_TIMEOUT)
1531                 host->data->error = -ETIMEDOUT;
1532         else if (intmask & SDHCI_INT_DATA_END_BIT)
1533                 host->data->error = -EILSEQ;
1534         else if ((intmask & SDHCI_INT_DATA_CRC) &&
1535                 SDHCI_GET_CMD(sdhci_readw(host, SDHCI_COMMAND))
1536                         != MMC_BUS_TEST_R)
1537                 host->data->error = -EILSEQ;
1538         else if (intmask & SDHCI_INT_ADMA_ERROR) {
1539                 printk(KERN_ERR "%s: ADMA error\n", mmc_hostname(host->mmc));
1540                 sdhci_show_adma_error(host);
1541                 host->data->error = -EIO;
1542         }
1543
1544         if (host->data->error)
1545                 sdhci_finish_data(host);
1546         else {
1547                 if (intmask & (SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL))
1548                         sdhci_transfer_pio(host);
1549
1550                 /*
1551                  * We currently don't do anything fancy with DMA
1552                  * boundaries, but as we can't disable the feature
1553                  * we need to at least restart the transfer.
1554                  */
1555                 if (intmask & SDHCI_INT_DMA_END)
1556                         sdhci_writel(host, sdhci_readl(host, SDHCI_DMA_ADDRESS),
1557                                 SDHCI_DMA_ADDRESS);
1558
1559                 if (intmask & SDHCI_INT_DATA_END) {
1560                         if (host->cmd) {
1561                                 /*
1562                                  * Data managed to finish before the
1563                                  * command completed. Make sure we do
1564                                  * things in the proper order.
1565                                  */
1566                                 host->data_early = 1;
1567                         } else {
1568                                 sdhci_finish_data(host);
1569                         }
1570                 }
1571         }
1572 }
1573
1574 static irqreturn_t sdhci_irq(int irq, void *dev_id)
1575 {
1576         irqreturn_t result;
1577         struct sdhci_host* host = dev_id;
1578         u32 intmask;
1579         int cardint = 0;
1580
1581         spin_lock(&host->lock);
1582
1583         intmask = sdhci_readl(host, SDHCI_INT_STATUS);
1584
1585         if (!intmask || intmask == 0xffffffff) {
1586                 result = IRQ_NONE;
1587                 goto out;
1588         }
1589
1590         DBG("*** %s got interrupt: 0x%08x\n",
1591                 mmc_hostname(host->mmc), intmask);
1592
1593         if (intmask & (SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE)) {
1594                 sdhci_writel(host, intmask & (SDHCI_INT_CARD_INSERT |
1595                         SDHCI_INT_CARD_REMOVE), SDHCI_INT_STATUS);
1596                 tasklet_schedule(&host->card_tasklet);
1597         }
1598
1599         intmask &= ~(SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE);
1600
1601         if (intmask & SDHCI_INT_CMD_MASK) {
1602                 sdhci_writel(host, intmask & SDHCI_INT_CMD_MASK,
1603                         SDHCI_INT_STATUS);
1604                 sdhci_cmd_irq(host, intmask & SDHCI_INT_CMD_MASK);
1605         }
1606
1607         if (intmask & SDHCI_INT_DATA_MASK) {
1608                 sdhci_writel(host, intmask & SDHCI_INT_DATA_MASK,
1609                         SDHCI_INT_STATUS);
1610                 sdhci_data_irq(host, intmask & SDHCI_INT_DATA_MASK);
1611         }
1612
1613         intmask &= ~(SDHCI_INT_CMD_MASK | SDHCI_INT_DATA_MASK);
1614
1615         intmask &= ~SDHCI_INT_ERROR;
1616
1617         if (intmask & SDHCI_INT_BUS_POWER) {
1618                 printk(KERN_ERR "%s: Card is consuming too much power!\n",
1619                         mmc_hostname(host->mmc));
1620                 sdhci_writel(host, SDHCI_INT_BUS_POWER, SDHCI_INT_STATUS);
1621         }
1622
1623         intmask &= ~SDHCI_INT_BUS_POWER;
1624
1625         if (intmask & SDHCI_INT_CARD_INT)
1626                 cardint = 1;
1627
1628         intmask &= ~SDHCI_INT_CARD_INT;
1629
1630         if (intmask) {
1631                 printk(KERN_ERR "%s: Unexpected interrupt 0x%08x.\n",
1632                         mmc_hostname(host->mmc), intmask);
1633                 sdhci_dumpregs(host);
1634
1635                 sdhci_writel(host, intmask, SDHCI_INT_STATUS);
1636         }
1637
1638         result = IRQ_HANDLED;
1639
1640         mmiowb();
1641 out:
1642         spin_unlock(&host->lock);
1643
1644         /*
1645          * We have to delay this as it calls back into the driver.
1646          */
1647         if (cardint)
1648                 mmc_signal_sdio_irq(host->mmc);
1649
1650         return result;
1651 }
1652
1653 /*****************************************************************************\
1654  *                                                                           *
1655  * Suspend/resume                                                            *
1656  *                                                                           *
1657 \*****************************************************************************/
1658
1659 #ifdef CONFIG_PM
1660
1661 int sdhci_suspend_host(struct sdhci_host *host, pm_message_t state)
1662 {
1663         int ret;
1664
1665         sdhci_disable_card_detection(host);
1666
1667         ret = mmc_suspend_host(host->mmc);
1668         if (ret)
1669                 return ret;
1670
1671         free_irq(host->irq, host);
1672
1673         if (host->vmmc)
1674                 ret = regulator_disable(host->vmmc);
1675
1676         return ret;
1677 }
1678
1679 EXPORT_SYMBOL_GPL(sdhci_suspend_host);
1680
1681 int sdhci_resume_host(struct sdhci_host *host)
1682 {
1683         int ret;
1684
1685         if (host->vmmc) {
1686                 int ret = regulator_enable(host->vmmc);
1687                 if (ret)
1688                         return ret;
1689         }
1690
1691
1692         if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
1693                 if (host->ops->enable_dma)
1694                         host->ops->enable_dma(host);
1695         }
1696
1697         ret = request_irq(host->irq, sdhci_irq, IRQF_SHARED,
1698                           mmc_hostname(host->mmc), host);
1699         if (ret)
1700                 return ret;
1701
1702         sdhci_init(host, (host->mmc->pm_flags & MMC_PM_KEEP_POWER));
1703         mmiowb();
1704
1705         ret = mmc_resume_host(host->mmc);
1706         sdhci_enable_card_detection(host);
1707
1708         return ret;
1709 }
1710
1711 EXPORT_SYMBOL_GPL(sdhci_resume_host);
1712
1713 void sdhci_enable_irq_wakeups(struct sdhci_host *host)
1714 {
1715         u8 val;
1716         val = sdhci_readb(host, SDHCI_WAKE_UP_CONTROL);
1717         val |= SDHCI_WAKE_ON_INT;
1718         sdhci_writeb(host, val, SDHCI_WAKE_UP_CONTROL);
1719 }
1720
1721 EXPORT_SYMBOL_GPL(sdhci_enable_irq_wakeups);
1722
1723 #endif /* CONFIG_PM */
1724
1725 /*****************************************************************************\
1726  *                                                                           *
1727  * Device allocation/registration                                            *
1728  *                                                                           *
1729 \*****************************************************************************/
1730
1731 struct sdhci_host *sdhci_alloc_host(struct device *dev,
1732         size_t priv_size)
1733 {
1734         struct mmc_host *mmc;
1735         struct sdhci_host *host;
1736
1737         WARN_ON(dev == NULL);
1738
1739         mmc = mmc_alloc_host(sizeof(struct sdhci_host) + priv_size, dev);
1740         if (!mmc)
1741                 return ERR_PTR(-ENOMEM);
1742
1743         host = mmc_priv(mmc);
1744         host->mmc = mmc;
1745
1746         return host;
1747 }
1748
1749 EXPORT_SYMBOL_GPL(sdhci_alloc_host);
1750
1751 int sdhci_add_host(struct sdhci_host *host)
1752 {
1753         struct mmc_host *mmc;
1754         unsigned int caps, ocr_avail;
1755         int ret;
1756
1757         WARN_ON(host == NULL);
1758         if (host == NULL)
1759                 return -EINVAL;
1760
1761         mmc = host->mmc;
1762
1763         if (debug_quirks)
1764                 host->quirks = debug_quirks;
1765
1766         sdhci_reset(host, SDHCI_RESET_ALL);
1767
1768         host->version = sdhci_readw(host, SDHCI_HOST_VERSION);
1769         host->version = (host->version & SDHCI_SPEC_VER_MASK)
1770                                 >> SDHCI_SPEC_VER_SHIFT;
1771         if (host->version > SDHCI_SPEC_300) {
1772                 printk(KERN_ERR "%s: Unknown controller version (%d). "
1773                         "You may experience problems.\n", mmc_hostname(mmc),
1774                         host->version);
1775         }
1776
1777         caps = (host->quirks & SDHCI_QUIRK_MISSING_CAPS) ? host->caps :
1778                 sdhci_readl(host, SDHCI_CAPABILITIES);
1779
1780         if (host->quirks & SDHCI_QUIRK_FORCE_DMA)
1781                 host->flags |= SDHCI_USE_SDMA;
1782         else if (!(caps & SDHCI_CAN_DO_SDMA))
1783                 DBG("Controller doesn't have SDMA capability\n");
1784         else
1785                 host->flags |= SDHCI_USE_SDMA;
1786
1787         if ((host->quirks & SDHCI_QUIRK_BROKEN_DMA) &&
1788                 (host->flags & SDHCI_USE_SDMA)) {
1789                 DBG("Disabling DMA as it is marked broken\n");
1790                 host->flags &= ~SDHCI_USE_SDMA;
1791         }
1792
1793         if ((host->version >= SDHCI_SPEC_200) && (caps & SDHCI_CAN_DO_ADMA2))
1794                 host->flags |= SDHCI_USE_ADMA;
1795
1796         if ((host->quirks & SDHCI_QUIRK_BROKEN_ADMA) &&
1797                 (host->flags & SDHCI_USE_ADMA)) {
1798                 DBG("Disabling ADMA as it is marked broken\n");
1799                 host->flags &= ~SDHCI_USE_ADMA;
1800         }
1801
1802         if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
1803                 if (host->ops->enable_dma) {
1804                         if (host->ops->enable_dma(host)) {
1805                                 printk(KERN_WARNING "%s: No suitable DMA "
1806                                         "available. Falling back to PIO.\n",
1807                                         mmc_hostname(mmc));
1808                                 host->flags &=
1809                                         ~(SDHCI_USE_SDMA | SDHCI_USE_ADMA);
1810                         }
1811                 }
1812         }
1813
1814         if (host->flags & SDHCI_USE_ADMA) {
1815                 /*
1816                  * We need to allocate descriptors for all sg entries
1817                  * (128) and potentially one alignment transfer for
1818                  * each of those entries.
1819                  */
1820                 host->adma_desc = kmalloc((128 * 2 + 1) * 4, GFP_KERNEL);
1821                 host->align_buffer = kmalloc(128 * 4, GFP_KERNEL);
1822                 if (!host->adma_desc || !host->align_buffer) {
1823                         kfree(host->adma_desc);
1824                         kfree(host->align_buffer);
1825                         printk(KERN_WARNING "%s: Unable to allocate ADMA "
1826                                 "buffers. Falling back to standard DMA.\n",
1827                                 mmc_hostname(mmc));
1828                         host->flags &= ~SDHCI_USE_ADMA;
1829                 }
1830         }
1831
1832         /*
1833          * If we use DMA, then it's up to the caller to set the DMA
1834          * mask, but PIO does not need the hw shim so we set a new
1835          * mask here in that case.
1836          */
1837         if (!(host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA))) {
1838                 host->dma_mask = DMA_BIT_MASK(64);
1839                 mmc_dev(host->mmc)->dma_mask = &host->dma_mask;
1840         }
1841
1842         if (host->version >= SDHCI_SPEC_300)
1843                 host->max_clk = (caps & SDHCI_CLOCK_V3_BASE_MASK)
1844                         >> SDHCI_CLOCK_BASE_SHIFT;
1845         else
1846                 host->max_clk = (caps & SDHCI_CLOCK_BASE_MASK)
1847                         >> SDHCI_CLOCK_BASE_SHIFT;
1848
1849         host->max_clk *= 1000000;
1850         if (host->max_clk == 0 || host->quirks &
1851                         SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN) {
1852                 if (!host->ops->get_max_clock) {
1853                         printk(KERN_ERR
1854                                "%s: Hardware doesn't specify base clock "
1855                                "frequency.\n", mmc_hostname(mmc));
1856                         return -ENODEV;
1857                 }
1858                 host->max_clk = host->ops->get_max_clock(host);
1859         }
1860
1861         host->timeout_clk =
1862                 (caps & SDHCI_TIMEOUT_CLK_MASK) >> SDHCI_TIMEOUT_CLK_SHIFT;
1863         if (host->timeout_clk == 0) {
1864                 if (host->ops->get_timeout_clock) {
1865                         host->timeout_clk = host->ops->get_timeout_clock(host);
1866                 } else if (!(host->quirks &
1867                                 SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)) {
1868                         printk(KERN_ERR
1869                                "%s: Hardware doesn't specify timeout clock "
1870                                "frequency.\n", mmc_hostname(mmc));
1871                         return -ENODEV;
1872                 }
1873         }
1874         if (caps & SDHCI_TIMEOUT_CLK_UNIT)
1875                 host->timeout_clk *= 1000;
1876
1877         /*
1878          * Set host parameters.
1879          */
1880         mmc->ops = &sdhci_ops;
1881         if (host->ops->get_min_clock)
1882                 mmc->f_min = host->ops->get_min_clock(host);
1883         else if (host->version >= SDHCI_SPEC_300)
1884                 mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_300;
1885         else
1886                 mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_200;
1887
1888         mmc->f_max = host->max_clk;
1889         mmc->caps |= MMC_CAP_SDIO_IRQ;
1890
1891         /*
1892          * A controller may support 8-bit width, but the board itself
1893          * might not have the pins brought out.  Boards that support
1894          * 8-bit width must set "mmc->caps |= MMC_CAP_8_BIT_DATA;" in
1895          * their platform code before calling sdhci_add_host(), and we
1896          * won't assume 8-bit width for hosts without that CAP.
1897          */
1898         if (!(host->quirks & SDHCI_QUIRK_FORCE_1_BIT_DATA))
1899                 mmc->caps |= MMC_CAP_4_BIT_DATA;
1900
1901         if (caps & SDHCI_CAN_DO_HISPD)
1902                 mmc->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED;
1903
1904         if ((host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION) &&
1905             mmc_card_is_removable(mmc))
1906                 mmc->caps |= MMC_CAP_NEEDS_POLL;
1907
1908         ocr_avail = 0;
1909         if (caps & SDHCI_CAN_VDD_330)
1910                 ocr_avail |= MMC_VDD_32_33 | MMC_VDD_33_34;
1911         if (caps & SDHCI_CAN_VDD_300)
1912                 ocr_avail |= MMC_VDD_29_30 | MMC_VDD_30_31;
1913         if (caps & SDHCI_CAN_VDD_180)
1914                 ocr_avail |= MMC_VDD_165_195;
1915
1916         mmc->ocr_avail = ocr_avail;
1917         mmc->ocr_avail_sdio = ocr_avail;
1918         if (host->ocr_avail_sdio)
1919                 mmc->ocr_avail_sdio &= host->ocr_avail_sdio;
1920         mmc->ocr_avail_sd = ocr_avail;
1921         if (host->ocr_avail_sd)
1922                 mmc->ocr_avail_sd &= host->ocr_avail_sd;
1923         else /* normal SD controllers don't support 1.8V */
1924                 mmc->ocr_avail_sd &= ~MMC_VDD_165_195;
1925         mmc->ocr_avail_mmc = ocr_avail;
1926         if (host->ocr_avail_mmc)
1927                 mmc->ocr_avail_mmc &= host->ocr_avail_mmc;
1928
1929         if (mmc->ocr_avail == 0) {
1930                 printk(KERN_ERR "%s: Hardware doesn't report any "
1931                         "support voltages.\n", mmc_hostname(mmc));
1932                 return -ENODEV;
1933         }
1934
1935         spin_lock_init(&host->lock);
1936
1937         /*
1938          * Maximum number of segments. Depends on if the hardware
1939          * can do scatter/gather or not.
1940          */
1941         if (host->flags & SDHCI_USE_ADMA)
1942                 mmc->max_segs = 128;
1943         else if (host->flags & SDHCI_USE_SDMA)
1944                 mmc->max_segs = 1;
1945         else /* PIO */
1946                 mmc->max_segs = 128;
1947
1948         /*
1949          * Maximum number of sectors in one transfer. Limited by DMA boundary
1950          * size (512KiB).
1951          */
1952         mmc->max_req_size = 524288;
1953
1954         /*
1955          * Maximum segment size. Could be one segment with the maximum number
1956          * of bytes. When doing hardware scatter/gather, each entry cannot
1957          * be larger than 64 KiB though.
1958          */
1959         if (host->flags & SDHCI_USE_ADMA) {
1960                 if (host->quirks & SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC)
1961                         mmc->max_seg_size = 65535;
1962                 else
1963                         mmc->max_seg_size = 65536;
1964         } else {
1965                 mmc->max_seg_size = mmc->max_req_size;
1966         }
1967
1968         /*
1969          * Maximum block size. This varies from controller to controller and
1970          * is specified in the capabilities register.
1971          */
1972         if (host->quirks & SDHCI_QUIRK_FORCE_BLK_SZ_2048) {
1973                 mmc->max_blk_size = 2;
1974         } else {
1975                 mmc->max_blk_size = (caps & SDHCI_MAX_BLOCK_MASK) >>
1976                                 SDHCI_MAX_BLOCK_SHIFT;
1977                 if (mmc->max_blk_size >= 3) {
1978                         printk(KERN_WARNING "%s: Invalid maximum block size, "
1979                                 "assuming 512 bytes\n", mmc_hostname(mmc));
1980                         mmc->max_blk_size = 0;
1981                 }
1982         }
1983
1984         mmc->max_blk_size = 512 << mmc->max_blk_size;
1985
1986         /*
1987          * Maximum block count.
1988          */
1989         mmc->max_blk_count = (host->quirks & SDHCI_QUIRK_NO_MULTIBLOCK) ? 1 : 65535;
1990
1991         /*
1992          * Init tasklets.
1993          */
1994         tasklet_init(&host->card_tasklet,
1995                 sdhci_tasklet_card, (unsigned long)host);
1996         tasklet_init(&host->finish_tasklet,
1997                 sdhci_tasklet_finish, (unsigned long)host);
1998
1999         setup_timer(&host->timer, sdhci_timeout_timer, (unsigned long)host);
2000
2001         ret = request_irq(host->irq, sdhci_irq, IRQF_SHARED,
2002                 mmc_hostname(mmc), host);
2003         if (ret)
2004                 goto untasklet;
2005
2006         host->vmmc = regulator_get(mmc_dev(mmc), "vmmc");
2007         if (IS_ERR(host->vmmc)) {
2008                 printk(KERN_INFO "%s: no vmmc regulator found\n", mmc_hostname(mmc));
2009                 host->vmmc = NULL;
2010         } else {
2011                 regulator_enable(host->vmmc);
2012         }
2013
2014         sdhci_init(host, 0);
2015
2016 #ifdef CONFIG_MMC_DEBUG
2017         sdhci_dumpregs(host);
2018 #endif
2019
2020 #ifdef SDHCI_USE_LEDS_CLASS
2021         snprintf(host->led_name, sizeof(host->led_name),
2022                 "%s::", mmc_hostname(mmc));
2023         host->led.name = host->led_name;
2024         host->led.brightness = LED_OFF;
2025         host->led.default_trigger = mmc_hostname(mmc);
2026         host->led.brightness_set = sdhci_led_control;
2027
2028         ret = led_classdev_register(mmc_dev(mmc), &host->led);
2029         if (ret)
2030                 goto reset;
2031 #endif
2032
2033         mmiowb();
2034
2035         mmc_add_host(mmc);
2036
2037         printk(KERN_INFO "%s: SDHCI controller on %s [%s] using %s\n",
2038                 mmc_hostname(mmc), host->hw_name, dev_name(mmc_dev(mmc)),
2039                 (host->flags & SDHCI_USE_ADMA) ? "ADMA" :
2040                 (host->flags & SDHCI_USE_SDMA) ? "DMA" : "PIO");
2041
2042         sdhci_enable_card_detection(host);
2043
2044         return 0;
2045
2046 #ifdef SDHCI_USE_LEDS_CLASS
2047 reset:
2048         sdhci_reset(host, SDHCI_RESET_ALL);
2049         free_irq(host->irq, host);
2050 #endif
2051 untasklet:
2052         tasklet_kill(&host->card_tasklet);
2053         tasklet_kill(&host->finish_tasklet);
2054
2055         return ret;
2056 }
2057
2058 EXPORT_SYMBOL_GPL(sdhci_add_host);
2059
2060 void sdhci_remove_host(struct sdhci_host *host, int dead)
2061 {
2062         unsigned long flags;
2063
2064         if (dead) {
2065                 spin_lock_irqsave(&host->lock, flags);
2066
2067                 host->flags |= SDHCI_DEVICE_DEAD;
2068
2069                 if (host->mrq) {
2070                         printk(KERN_ERR "%s: Controller removed during "
2071                                 " transfer!\n", mmc_hostname(host->mmc));
2072
2073                         host->mrq->cmd->error = -ENOMEDIUM;
2074                         tasklet_schedule(&host->finish_tasklet);
2075                 }
2076
2077                 spin_unlock_irqrestore(&host->lock, flags);
2078         }
2079
2080         sdhci_disable_card_detection(host);
2081
2082         mmc_remove_host(host->mmc);
2083
2084 #ifdef SDHCI_USE_LEDS_CLASS
2085         led_classdev_unregister(&host->led);
2086 #endif
2087
2088         if (!dead)
2089                 sdhci_reset(host, SDHCI_RESET_ALL);
2090
2091         free_irq(host->irq, host);
2092
2093         del_timer_sync(&host->timer);
2094
2095         tasklet_kill(&host->card_tasklet);
2096         tasklet_kill(&host->finish_tasklet);
2097
2098         if (host->vmmc) {
2099                 regulator_disable(host->vmmc);
2100                 regulator_put(host->vmmc);
2101         }
2102
2103         kfree(host->adma_desc);
2104         kfree(host->align_buffer);
2105
2106         host->adma_desc = NULL;
2107         host->align_buffer = NULL;
2108 }
2109
2110 EXPORT_SYMBOL_GPL(sdhci_remove_host);
2111
2112 void sdhci_free_host(struct sdhci_host *host)
2113 {
2114         mmc_free_host(host->mmc);
2115 }
2116
2117 EXPORT_SYMBOL_GPL(sdhci_free_host);
2118
2119 /*****************************************************************************\
2120  *                                                                           *
2121  * Driver init/exit                                                          *
2122  *                                                                           *
2123 \*****************************************************************************/
2124
2125 static int __init sdhci_drv_init(void)
2126 {
2127         printk(KERN_INFO DRIVER_NAME
2128                 ": Secure Digital Host Controller Interface driver\n");
2129         printk(KERN_INFO DRIVER_NAME ": Copyright(c) Pierre Ossman\n");
2130
2131         return 0;
2132 }
2133
2134 static void __exit sdhci_drv_exit(void)
2135 {
2136 }
2137
2138 module_init(sdhci_drv_init);
2139 module_exit(sdhci_drv_exit);
2140
2141 module_param(debug_quirks, uint, 0444);
2142
2143 MODULE_AUTHOR("Pierre Ossman <pierre@ossman.eu>");
2144 MODULE_DESCRIPTION("Secure Digital Host Controller Interface core driver");
2145 MODULE_LICENSE("GPL");
2146
2147 MODULE_PARM_DESC(debug_quirks, "Force certain quirks.");