drivers/misc/ti-st/st_kim.c

   1 /*
   2  *  Shared Transport Line discipline driver Core
   3  *      Init Manager module responsible for GPIO control
   4  *      and firmware download
   5  *  Copyright (C) 2009-2010 Texas Instruments
   6  *  Author: Pavan Savoy <pavan_savoy@ti.com>
   7  *
   8  *  This program is free software; you can redistribute it and/or modify
   9  *  it under the terms of the GNU General Public License version 2 as
  10  *  published by the Free Software Foundation.
  11  *
  12  *  This program is distributed in the hope that it will be useful,
  13  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15  *  GNU General Public License for more details.
  16  *
  17  *  You should have received a copy of the GNU General Public License
  18  *  along with this program; if not, write to the Free Software
  19  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  20  *
  21  */
  22
  23 #define pr_fmt(fmt) "(stk) :" fmt
  24 #include <linux/platform_device.h>
  25 #include <linux/jiffies.h>
  26 #include <linux/firmware.h>
  27 #include <linux/delay.h>
  28 #include <linux/wait.h>
  29 #include <linux/gpio.h>
  30 #include <linux/debugfs.h>
  31 #include <linux/seq_file.h>
  32 #include <linux/sched.h>
  33 #include <linux/rfkill.h>
  34
  35 /* understand BT events for fw response */
  36 #include <net/bluetooth/bluetooth.h>
  37 #include <net/bluetooth/hci_core.h>
  38 #include <net/bluetooth/hci.h>
  39
  40 #include <linux/ti_wilink_st.h>
  41
  42
  43 static int kim_probe(struct platform_device *pdev);
  44 static int kim_remove(struct platform_device *pdev);
  45
  46 /* KIM platform device driver structure */
  47 static struct platform_driver kim_platform_driver = {
  48         .probe = kim_probe,
  49         .remove = kim_remove,
  50         /* TODO: ST driver power management during suspend/resume ?
  51          */
  52 #if 0
  53         .suspend = kim_suspend,
  54         .resume = kim_resume,
  55 #endif
  56         .driver = {
  57                    .name = "kim",
  58                    .owner = THIS_MODULE,
  59                    },
  60 };
  61
  62 static int kim_toggle_radio(void*, bool);
  63 static const struct rfkill_ops kim_rfkill_ops = {
  64         .set_block = kim_toggle_radio,
  65 };
  66
  67 /* strings to be used for rfkill entries and by
  68  * ST Core to be used for sysfs debug entry
  69  */
  70 #define PROTO_ENTRY(type, name) name
  71 const unsigned char *protocol_names[] = {
  72         PROTO_ENTRY(ST_BT, "Bluetooth"),
  73         PROTO_ENTRY(ST_FM, "FM"),
  74         PROTO_ENTRY(ST_GPS, "GPS"),
  75 };
  76
  77 #define MAX_ST_DEVICES  3       /* Imagine 1 on each UART for now */
  78 static struct platform_device *st_kim_devices[MAX_ST_DEVICES];
  79
  80 /**********************************************************************/
  81 /* internal functions */
  82
  83 /**
  84  * st_get_plat_device -
  85  *      function which returns the reference to the platform device
  86  *      requested by id. As of now only 1 such device exists (id=0)
  87  *      the context requesting for reference can get the id to be
  88  *      requested by a. The protocol driver which is registering or
  89  *      b. the tty device which is opened.
  90  */
  91 static struct platform_device *st_get_plat_device(int id)
  92 {
  93         return st_kim_devices[id];
  94 }
  95
  96 /**
  97  * validate_firmware_response -
  98  *      function to return whether the firmware response was proper
  99  *      in case of error don't complete so that waiting for proper
 100  *      response times out
 101  */
 102 void validate_firmware_response(struct kim_data_s *kim_gdata)
 103 {
 104         struct sk_buff *skb = kim_gdata->rx_skb;
 105         if (unlikely(skb->data[5] != 0)) {
 106                 pr_err("no proper response during fw download");
 107                 pr_err("data6 %x", skb->data[5]);
 108                 return;         /* keep waiting for the proper response */
 109         }
 110         /* becos of all the script being downloaded */
 111         complete_all(&kim_gdata->kim_rcvd);
 112         kfree_skb(skb);
 113 }
 114
 115 /* check for data len received inside kim_int_recv
 116  * most often hit the last case to update state to waiting for data
 117  */
 118 static inline int kim_check_data_len(struct kim_data_s *kim_gdata, int len)
 119 {
 120         register int room = skb_tailroom(kim_gdata->rx_skb);
 121
 122         pr_debug("len %d room %d", len, room);
 123
 124         if (!len) {
 125                 validate_firmware_response(kim_gdata);
 126         } else if (len > room) {
 127                 /* Received packet's payload length is larger.
 128                  * We can't accommodate it in created skb.
 129                  */
 130                 pr_err("Data length is too large len %d room %d", len,
 131                            room);
 132                 kfree_skb(kim_gdata->rx_skb);
 133         } else {
 134                 /* Packet header has non-zero payload length and
 135                  * we have enough space in created skb. Lets read
 136                  * payload data */
 137                 kim_gdata->rx_state = ST_BT_W4_DATA;
 138                 kim_gdata->rx_count = len;
 139                 return len;
 140         }
 141
 142         /* Change ST LL state to continue to process next
 143          * packet */
 144         kim_gdata->rx_state = ST_W4_PACKET_TYPE;
 145         kim_gdata->rx_skb = NULL;
 146         kim_gdata->rx_count = 0;
 147
 148         return 0;
 149 }
 150
 151 /**
 152  * kim_int_recv - receive function called during firmware download
 153  *      firmware download responses on different UART drivers
 154  *      have been observed to come in bursts of different
 155  *      tty_receive and hence the logic
 156  */
 157 void kim_int_recv(struct kim_data_s *kim_gdata,
 158         const unsigned char *data, long count)
 159 {
 160         const unsigned char *ptr;
 161         struct hci_event_hdr *eh;
 162         int len = 0, type = 0;
 163
 164         pr_debug("%s", __func__);
 165         /* Decode received bytes here */
 166         ptr = data;
 167         if (unlikely(ptr == NULL)) {
 168                 pr_err(" received null from TTY ");
 169                 return;
 170         }
 171
 172         while (count) {
 173                 if (kim_gdata->rx_count) {
 174                         len = min_t(unsigned int, kim_gdata->rx_count, count);
 175                         memcpy(skb_put(kim_gdata->rx_skb, len), ptr, len);
 176                         kim_gdata->rx_count -= len;
 177                         count -= len;
 178                         ptr += len;
 179
 180                         if (kim_gdata->rx_count)
 181                                 continue;
 182
 183                         /* Check ST RX state machine , where are we? */
 184                         switch (kim_gdata->rx_state) {
 185                                 /* Waiting for complete packet ? */
 186                         case ST_BT_W4_DATA:
 187                                 pr_debug("Complete pkt received");
 188                                 validate_firmware_response(kim_gdata);
 189                                 kim_gdata->rx_state = ST_W4_PACKET_TYPE;
 190                                 kim_gdata->rx_skb = NULL;
 191                                 continue;
 192                                 /* Waiting for Bluetooth event header ? */
 193                         case ST_BT_W4_EVENT_HDR:
 194                                 eh = (struct hci_event_hdr *)kim_gdata->
 195                                     rx_skb->data;
 196                                 pr_debug("Event header: evt 0x%2.2x"
 197                                            "plen %d", eh->evt, eh->plen);
 198                                 kim_check_data_len(kim_gdata, eh->plen);
 199                                 continue;
 200                         }       /* end of switch */
 201                 }               /* end of if rx_state */
 202                 switch (*ptr) {
 203                         /* Bluetooth event packet? */
 204                 case HCI_EVENT_PKT:
 205                         pr_info("Event packet");
 206                         kim_gdata->rx_state = ST_BT_W4_EVENT_HDR;
 207                         kim_gdata->rx_count = HCI_EVENT_HDR_SIZE;
 208                         type = HCI_EVENT_PKT;
 209                         break;
 210                 default:
 211                         pr_info("unknown packet");
 212                         ptr++;
 213                         count--;
 214                         continue;
 215                 }
 216                 ptr++;
 217                 count--;
 218                 kim_gdata->rx_skb =
 219                     bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC);
 220                 if (!kim_gdata->rx_skb) {
 221                         pr_err("can't allocate mem for new packet");
 222                         kim_gdata->rx_state = ST_W4_PACKET_TYPE;
 223                         kim_gdata->rx_count = 0;
 224                         return;
 225                 }
 226                 bt_cb(kim_gdata->rx_skb)->pkt_type = type;
 227         }
 228         pr_info("done %s", __func__);
 229         return;
 230 }
 231
 232 static long read_local_version(struct kim_data_s *kim_gdata, char *bts_scr_name)
 233 {
 234         unsigned short version = 0, chip = 0, min_ver = 0, maj_ver = 0;
 235         const char read_ver_cmd[] = { 0x01, 0x01, 0x10, 0x00 };
 236
 237         pr_debug("%s", __func__);
 238
 239         INIT_COMPLETION(kim_gdata->kim_rcvd);
 240         if (4 != st_int_write(kim_gdata->core_data, read_ver_cmd, 4)) {
 241                 pr_err("kim: couldn't write 4 bytes");
 242                 return -1;
 243         }
 244
 245         if (!wait_for_completion_timeout
 246             (&kim_gdata->kim_rcvd, msecs_to_jiffies(CMD_RESP_TIME))) {
 247                 pr_err(" waiting for ver info- timed out ");
 248                 return -1;
 249         }
 250
 251         version =
 252                 MAKEWORD(kim_gdata->resp_buffer[13],
 253                                 kim_gdata->resp_buffer[14]);
 254         chip = (version & 0x7C00) >> 10;
 255         min_ver = (version & 0x007F);
 256         maj_ver = (version & 0x0380) >> 7;
 257
 258         if (version & 0x8000)
 259                 maj_ver |= 0x0008;
 260
 261         sprintf(bts_scr_name, "TIInit_%d.%d.%d.bts", chip, maj_ver, min_ver);
 262
 263         /* to be accessed later via sysfs entry */
 264         kim_gdata->version.full = version;
 265         kim_gdata->version.chip = chip;
 266         kim_gdata->version.maj_ver = maj_ver;
 267         kim_gdata->version.min_ver = min_ver;
 268
 269         pr_info("%s", bts_scr_name);
 270         return 0;
 271 }
 272
 273 /**
 274  * download_firmware -
 275  *      internal function which parses through the .bts firmware
 276  *      script file intreprets SEND, DELAY actions only as of now
 277  */
 278 static long download_firmware(struct kim_data_s *kim_gdata)
 279 {
 280         long err = 0;
 281         long len = 0;
 282         unsigned char *ptr = NULL;
 283         unsigned char *action_ptr = NULL;
 284         unsigned char bts_scr_name[30] = { 0 }; /* 30 char long bts scr name? */
 285
 286         err = read_local_version(kim_gdata, bts_scr_name);
 287         if (err != 0) {
 288                 pr_err("kim: failed to read local ver");
 289                 return err;
 290         }
 291         err =
 292             request_firmware(&kim_gdata->fw_entry, bts_scr_name,
 293                              &kim_gdata->kim_pdev->dev);
 294         if (unlikely((err != 0) || (kim_gdata->fw_entry->data == NULL) ||
 295                      (kim_gdata->fw_entry->size == 0))) {
 296                 pr_err(" request_firmware failed(errno %ld) for %s", err,
 297                            bts_scr_name);
 298                 return -1;
 299         }
 300         ptr = (void *)kim_gdata->fw_entry->data;
 301         len = kim_gdata->fw_entry->size;
 302         /* bts_header to remove out magic number and
 303          * version
 304          */
 305         ptr += sizeof(struct bts_header);
 306         len -= sizeof(struct bts_header);
 307
 308         while (len > 0 && ptr) {
 309                 pr_debug(" action size %d, type %d ",
 310                            ((struct bts_action *)ptr)->size,
 311                            ((struct bts_action *)ptr)->type);
 312
 313                 switch (((struct bts_action *)ptr)->type) {
 314                 case ACTION_SEND_COMMAND:       /* action send */
 315                         action_ptr = &(((struct bts_action *)ptr)->data[0]);
 316                         if (unlikely
 317                             (((struct hci_command *)action_ptr)->opcode ==
 318                              0xFF36)) {
 319                                 /* ignore remote change
 320                                  * baud rate HCI VS command */
 321                                 pr_err
 322                                     (" change remote baud"
 323                                     " rate command in firmware");
 324                                 break;
 325                         }
 326
 327                         INIT_COMPLETION(kim_gdata->kim_rcvd);
 328                         err = st_int_write(kim_gdata->core_data,
 329                         ((struct bts_action_send *)action_ptr)->data,
 330                                            ((struct bts_action *)ptr)->size);
 331                         if (unlikely(err < 0)) {
 332                                 release_firmware(kim_gdata->fw_entry);
 333                                 return -1;
 334                         }
 335                         if (!wait_for_completion_timeout
 336                             (&kim_gdata->kim_rcvd,
 337                              msecs_to_jiffies(CMD_RESP_TIME))) {
 338                                 pr_err
 339                                     (" response timeout during fw download ");
 340                                 /* timed out */
 341                                 release_firmware(kim_gdata->fw_entry);
 342                                 return -1;
 343                         }
 344                         break;
 345                 case ACTION_DELAY:      /* sleep */
 346                         pr_info("sleep command in scr");
 347                         action_ptr = &(((struct bts_action *)ptr)->data[0]);
 348                         mdelay(((struct bts_action_delay *)action_ptr)->msec);
 349                         break;
 350                 }
 351                 len =
 352                     len - (sizeof(struct bts_action) +
 353                            ((struct bts_action *)ptr)->size);
 354                 ptr =
 355                     ptr + sizeof(struct bts_action) +
 356                     ((struct bts_action *)ptr)->size;
 357         }
 358         /* fw download complete */
 359         release_firmware(kim_gdata->fw_entry);
 360         return 0;
 361 }
 362
 363 /**********************************************************************/
 364 /* functions called from ST core */
 365 /* function to toggle the GPIO
 366  * needs to know whether the GPIO is active high or active low
 367  */
 368 void st_kim_chip_toggle(enum proto_type type, enum kim_gpio_state state)
 369 {
 370         struct platform_device  *kim_pdev;
 371         struct kim_data_s       *kim_gdata;
 372         pr_info(" %s ", __func__);
 373
 374         kim_pdev = st_get_plat_device(0);
 375         kim_gdata = dev_get_drvdata(&kim_pdev->dev);
 376
 377         if (kim_gdata->gpios[type] == -1) {
 378                 pr_info(" gpio not requested for protocol %s",
 379                            protocol_names[type]);
 380                 return;
 381         }
 382         switch (type) {
 383         case ST_BT:
 384                 /*Do Nothing */
 385                 break;
 386
 387         case ST_FM:
 388                 if (state == KIM_GPIO_ACTIVE)
 389                         gpio_set_value(kim_gdata->gpios[ST_FM], GPIO_LOW);
 390                 else
 391                         gpio_set_value(kim_gdata->gpios[ST_FM], GPIO_HIGH);
 392                 break;
 393
 394         case ST_GPS:
 395                 if (state == KIM_GPIO_ACTIVE)
 396                         gpio_set_value(kim_gdata->gpios[ST_GPS], GPIO_HIGH);
 397                 else
 398                         gpio_set_value(kim_gdata->gpios[ST_GPS], GPIO_LOW);
 399                 break;
 400
 401         case ST_MAX:
 402         default:
 403                 break;
 404         }
 405
 406         return;
 407 }
 408
 409 /* called from ST Core, when REG_IN_PROGRESS (registration in progress)
 410  * can be because of
 411  * 1. response to read local version
 412  * 2. during send/recv's of firmware download
 413  */
 414 void st_kim_recv(void *disc_data, const unsigned char *data, long count)
 415 {
 416         struct st_data_s        *st_gdata = (struct st_data_s *)disc_data;
 417         struct kim_data_s       *kim_gdata = st_gdata->kim_data;
 418
 419         pr_info(" %s ", __func__);
 420         /* copy to local buffer */
 421         if (unlikely(data[4] == 0x01 && data[5] == 0x10 && data[0] == 0x04)) {
 422                 /* must be the read_ver_cmd */
 423                 memcpy(kim_gdata->resp_buffer, data, count);
 424                 complete_all(&kim_gdata->kim_rcvd);
 425                 return;
 426         } else {
 427                 kim_int_recv(kim_gdata, data, count);
 428                 /* either completes or times out */
 429         }
 430         return;
 431 }
 432
 433 /* to signal completion of line discipline installation
 434  * called from ST Core, upon tty_open
 435  */
 436 void st_kim_complete(void *kim_data)
 437 {
 438         struct kim_data_s       *kim_gdata = (struct kim_data_s *)kim_data;
 439         complete(&kim_gdata->ldisc_installed);
 440 }
 441
 442 /**
 443  * st_kim_start - called from ST Core upon 1st registration
 444  *      This involves toggling the chip enable gpio, reading
 445  *      the firmware version from chip, forming the fw file name
 446  *      based on the chip version, requesting the fw, parsing it
 447  *      and perform download(send/recv).
 448  */
 449 long st_kim_start(void *kim_data)
 450 {
 451         long err = 0;
 452         long retry = POR_RETRY_COUNT;
 453         struct kim_data_s       *kim_gdata = (struct kim_data_s *)kim_data;
 454
 455         pr_info(" %s", __func__);
 456
 457         do {
 458                 /* TODO: this is only because rfkill sub-system
 459                  * doesn't send events to user-space if the state
 460                  * isn't changed
 461                  */
 462                 rfkill_set_hw_state(kim_gdata->rfkill[ST_BT], 1);
 463                 /* Configure BT nShutdown to HIGH state */
 464                 gpio_set_value(kim_gdata->gpios[ST_BT], GPIO_LOW);
 465                 mdelay(5);      /* FIXME: a proper toggle */
 466                 gpio_set_value(kim_gdata->gpios[ST_BT], GPIO_HIGH);
 467                 mdelay(100);
 468                 /* re-initialize the completion */
 469                 INIT_COMPLETION(kim_gdata->ldisc_installed);
 470 #if 0 /* older way of signalling user-space UIM */
 471                 /* send signal to UIM */
 472                 err = kill_pid(find_get_pid(kim_gdata->uim_pid), SIGUSR2, 0);
 473                 if (err != 0) {
 474                         pr_info(" sending SIGUSR2 to uim failed %ld", err);
 475                         err = -1;
 476                         continue;
 477                 }
 478 #endif
 479                 /* unblock and send event to UIM via /dev/rfkill */
 480                 rfkill_set_hw_state(kim_gdata->rfkill[ST_BT], 0);
 481                 /* wait for ldisc to be installed */
 482                 err = wait_for_completion_timeout(&kim_gdata->ldisc_installed,
 483                                 msecs_to_jiffies(LDISC_TIME));
 484                 if (!err) {     /* timeout */
 485                         pr_err("line disc installation timed out ");
 486                         err = -1;
 487                         continue;
 488                 } else {
 489                         /* ldisc installed now */
 490                         pr_info(" line discipline installed ");
 491                         err = download_firmware(kim_gdata);
 492                         if (err != 0) {
 493                                 pr_err("download firmware failed");
 494                                 continue;
 495                         } else {        /* on success don't retry */
 496                                 break;
 497                         }
 498                 }
 499         } while (retry--);
 500         return err;
 501 }
 502
 503 /**
 504  * st_kim_stop - called from ST Core, on the last un-registration
 505  *      toggle low the chip enable gpio
 506  */
 507 long st_kim_stop(void *kim_data)
 508 {
 509         long err = 0;
 510         struct kim_data_s       *kim_gdata = (struct kim_data_s *)kim_data;
 511
 512         INIT_COMPLETION(kim_gdata->ldisc_installed);
 513 #if 0 /* older way of signalling user-space UIM */
 514         /* send signal to UIM */
 515         err = kill_pid(find_get_pid(kim_gdata->uim_pid), SIGUSR2, 1);
 516         if (err != 0) {
 517                 pr_err("sending SIGUSR2 to uim failed %ld", err);
 518                 return -1;
 519         }
 520 #endif
 521         /* set BT rfkill to be blocked */
 522         err = rfkill_set_hw_state(kim_gdata->rfkill[ST_BT], 1);
 523
 524         /* wait for ldisc to be un-installed */
 525         err = wait_for_completion_timeout(&kim_gdata->ldisc_installed,
 526                         msecs_to_jiffies(LDISC_TIME));
 527         if (!err) {             /* timeout */
 528                 pr_err(" timed out waiting for ldisc to be un-installed");
 529                 return -1;
 530         }
 531
 532         /* By default configure BT nShutdown to LOW state */
 533         gpio_set_value(kim_gdata->gpios[ST_BT], GPIO_LOW);
 534         mdelay(1);
 535         gpio_set_value(kim_gdata->gpios[ST_BT], GPIO_HIGH);
 536         mdelay(1);
 537         gpio_set_value(kim_gdata->gpios[ST_BT], GPIO_LOW);
 538         return err;
 539 }
 540
 541 /**********************************************************************/
 542 /* functions called from subsystems */
 543 /* called when debugfs entry is read from */
 544
 545 static int show_version(struct seq_file *s, void *unused)
 546 {
 547         struct kim_data_s *kim_gdata = (struct kim_data_s *)s->private;
 548         seq_printf(s, "%04X %d.%d.%d\n", kim_gdata->version.full,
 549                         kim_gdata->version.chip, kim_gdata->version.maj_ver,
 550                         kim_gdata->version.min_ver);
 551         return 0;
 552 }
 553
 554 static int show_list(struct seq_file *s, void *unused)
 555 {
 556         struct kim_data_s *kim_gdata = (struct kim_data_s *)s->private;
 557         kim_st_list_protocols(kim_gdata->core_data, s);
 558         return 0;
 559 }
 560
 561 /* function called from rfkill subsystem, when someone from
 562  * user space would write 0/1 on the sysfs entry
 563  * /sys/class/rfkill/rfkill0,1,3/state
 564  */
 565 static int kim_toggle_radio(void *data, bool blocked)
 566 {
 567         enum proto_type type = *((enum proto_type *)data);
 568         pr_debug(" %s: %d ", __func__, type);
 569
 570         switch (type) {
 571         case ST_BT:
 572                 /* do nothing */
 573         break;
 574         case ST_FM:
 575         case ST_GPS:
 576                 if (blocked)
 577                         st_kim_chip_toggle(type, KIM_GPIO_INACTIVE);
 578                 else
 579                         st_kim_chip_toggle(type, KIM_GPIO_ACTIVE);
 580         break;
 581         case ST_MAX:
 582                 pr_err(" wrong proto type ");
 583         break;
 584         }
 585         return 0;
 586 }
 587
 588 /**
 589  * st_kim_ref - reference the core's data
 590  *      This references the per-ST platform device in the arch/xx/
 591  *      board-xx.c file.
 592  *      This would enable multiple such platform devices to exist
 593  *      on a given platform
 594  */
 595 void st_kim_ref(struct st_data_s **core_data, int id)
 596 {
 597         struct platform_device  *pdev;
 598         struct kim_data_s       *kim_gdata;
 599         /* get kim_gdata reference from platform device */
 600         pdev = st_get_plat_device(id);
 601         kim_gdata = dev_get_drvdata(&pdev->dev);
 602         *core_data = kim_gdata->core_data;
 603 }
 604
 605 static int kim_version_open(struct inode *i, struct file *f)
 606 {
 607         return single_open(f, show_version, i->i_private);
 608 }
 609
 610 static int kim_list_open(struct inode *i, struct file *f)
 611 {
 612         return single_open(f, show_list, i->i_private);
 613 }
 614
 615 static const struct file_operations version_debugfs_fops = {
 616         /* version info */
 617         .open = kim_version_open,
 618         .read = seq_read,
 619         .llseek = seq_lseek,
 620         .release = single_release,
 621 };
 622 static const struct file_operations list_debugfs_fops = {
 623         /* protocols info */
 624         .open = kim_list_open,
 625         .read = seq_read,
 626         .llseek = seq_lseek,
 627         .release = single_release,
 628 };
 629
 630 /**********************************************************************/
 631 /* functions called from platform device driver subsystem
 632  * need to have a relevant platform device entry in the platform's
 633  * board-*.c file
 634  */
 635
 636 struct dentry *kim_debugfs_dir;
 637 static int kim_probe(struct platform_device *pdev)
 638 {
 639         long status;
 640         long proto;
 641         long *gpios = pdev->dev.platform_data;
 642         struct kim_data_s       *kim_gdata;
 643
 644         if ((pdev->id != -1) && (pdev->id < MAX_ST_DEVICES)) {
 645                 /* multiple devices could exist */
 646                 st_kim_devices[pdev->id] = pdev;
 647         } else {
 648                 /* platform's sure about existance of 1 device */
 649                 st_kim_devices[0] = pdev;
 650         }
 651
 652         kim_gdata = kzalloc(sizeof(struct kim_data_s), GFP_ATOMIC);
 653         if (!kim_gdata) {
 654                 pr_err("no mem to allocate");
 655                 return -ENOMEM;
 656         }
 657         dev_set_drvdata(&pdev->dev, kim_gdata);
 658
 659         status = st_core_init(&kim_gdata->core_data);
 660         if (status != 0) {
 661                 pr_err(" ST core init failed");
 662                 return -1;
 663         }
 664         /* refer to itself */
 665         kim_gdata->core_data->kim_data = kim_gdata;
 666
 667         for (proto = 0; proto < ST_MAX; proto++) {
 668                 kim_gdata->gpios[proto] = gpios[proto];
 669                 pr_info(" %ld gpio to be requested", gpios[proto]);
 670         }
 671
 672         for (proto = 0; (proto < ST_MAX) && (gpios[proto] != -1); proto++) {
 673                 /* Claim the Bluetooth/FM/GPIO
 674                  * nShutdown gpio from the system
 675                  */
 676                 status = gpio_request(gpios[proto], "kim");
 677                 if (unlikely(status)) {
 678                         pr_err(" gpio %ld request failed ", gpios[proto]);
 679                         proto -= 1;
 680                         while (proto >= 0) {
 681                                 if (gpios[proto] != -1)
 682                                         gpio_free(gpios[proto]);
 683                         }
 684                         return status;
 685                 }
 686
 687                 /* Configure nShutdown GPIO as output=0 */
 688                 status =
 689                     gpio_direction_output(gpios[proto], 0);
 690                 if (unlikely(status)) {
 691                         pr_err(" unable to configure gpio %ld",
 692                                    gpios[proto]);
 693                         proto -= 1;
 694                         while (proto >= 0) {
 695                                 if (gpios[proto] != -1)
 696                                         gpio_free(gpios[proto]);
 697                         }
 698                         return status;
 699                 }
 700         }
 701         /* get reference of pdev for request_firmware
 702          */
 703         kim_gdata->kim_pdev = pdev;
 704         init_completion(&kim_gdata->kim_rcvd);
 705         init_completion(&kim_gdata->ldisc_installed);
 706
 707         for (proto = 0; (proto < ST_MAX) && (gpios[proto] != -1); proto++) {
 708                 /* TODO: should all types be rfkill_type_bt ? */
 709                 kim_gdata->rf_protos[proto] = proto;
 710                 kim_gdata->rfkill[proto] = rfkill_alloc(protocol_names[proto],
 711                         &pdev->dev, RFKILL_TYPE_BLUETOOTH,
 712                         &kim_rfkill_ops, &kim_gdata->rf_protos[proto]);
 713                 if (kim_gdata->rfkill[proto] == NULL) {
 714                         pr_err("cannot create rfkill entry for gpio %ld",
 715                                    gpios[proto]);
 716                         continue;
 717                 }
 718                 /* block upon creation */
 719                 rfkill_init_sw_state(kim_gdata->rfkill[proto], 1);
 720                 status = rfkill_register(kim_gdata->rfkill[proto]);
 721                 if (unlikely(status)) {
 722                         pr_err("rfkill registration failed for gpio %ld",
 723                                    gpios[proto]);
 724                         rfkill_unregister(kim_gdata->rfkill[proto]);
 725                         continue;
 726                 }
 727                 pr_info("rfkill entry created for %ld", gpios[proto]);
 728         }
 729
 730         kim_debugfs_dir = debugfs_create_dir("ti-st", NULL);
 731         if (IS_ERR(kim_debugfs_dir)) {
 732                 pr_err(" debugfs entries creation failed ");
 733                 kim_debugfs_dir = NULL;
 734                 return -1;
 735         }
 736
 737         debugfs_create_file("version", S_IRUGO, kim_debugfs_dir,
 738                                 kim_gdata, &version_debugfs_fops);
 739         debugfs_create_file("protocols", S_IRUGO, kim_debugfs_dir,
 740                                 kim_gdata, &list_debugfs_fops);
 741         pr_info(" debugfs entries created ");
 742         return 0;
 743 }
 744
 745 static int kim_remove(struct platform_device *pdev)
 746 {
 747         /* free the GPIOs requested
 748          */
 749         long *gpios = pdev->dev.platform_data;
 750         long proto;
 751         struct kim_data_s       *kim_gdata;
 752
 753         kim_gdata = dev_get_drvdata(&pdev->dev);
 754
 755         for (proto = 0; (proto < ST_MAX) && (gpios[proto] != -1); proto++) {
 756                 /* Claim the Bluetooth/FM/GPIO
 757                  * nShutdown gpio from the system
 758                  */
 759                 gpio_free(gpios[proto]);
 760                 rfkill_unregister(kim_gdata->rfkill[proto]);
 761                 rfkill_destroy(kim_gdata->rfkill[proto]);
 762                 kim_gdata->rfkill[proto] = NULL;
 763         }
 764         pr_info("kim: GPIO Freed");
 765         debugfs_remove_recursive(kim_debugfs_dir);
 766         kim_gdata->kim_pdev = NULL;
 767         st_core_exit(kim_gdata->core_data);
 768
 769         kfree(kim_gdata);
 770         kim_gdata = NULL;
 771         return 0;
 772 }
 773
 774 /**********************************************************************/
 775 /* entry point for ST KIM module, called in from ST Core */
 776
 777 static int __init st_kim_init(void)
 778 {
 779         long ret = 0;
 780         ret = platform_driver_register(&kim_platform_driver);
 781         if (ret != 0) {
 782                 pr_err("platform drv registration failed");
 783                 return -1;
 784         }
 785         return 0;
 786 }
 787
 788 static void __exit st_kim_deinit(void)
 789 {
 790         /* the following returns void */
 791         platform_driver_unregister(&kim_platform_driver);
 792 }
 793
 794
 795 module_init(st_kim_init);
 796 module_exit(st_kim_deinit);
 797 MODULE_AUTHOR("Pavan Savoy <pavan_savoy@ti.com>");
 798 MODULE_DESCRIPTION("Shared Transport Driver for TI BT/FM/GPS combo chips ");
 799 MODULE_LICENSE("GPL");