Merge branch 'fix/hda' of git://github.com/tiwai/sound
[pandora-kernel.git] / drivers / mfd / omap-usb-host.c
1 /**
2  * omap-usb-host.c - The USBHS core driver for OMAP EHCI & OHCI
3  *
4  * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com
5  * Author: Keshava Munegowda <keshava_mgowda@ti.com>
6  *
7  * This program is free software: you can redistribute it and/or modify
8  * it under the terms of the GNU General Public License version 2  of
9  * the License as published by the Free Software Foundation.
10  *
11  * This program is distributed in the hope that it will be useful,
12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
14  * GNU General Public License for more details.
15  *
16  * You should have received a copy of the GNU General Public License
17  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
18  */
19 #include <linux/kernel.h>
20 #include <linux/module.h>
21 #include <linux/types.h>
22 #include <linux/slab.h>
23 #include <linux/delay.h>
24 #include <linux/platform_device.h>
25 #include <linux/clk.h>
26 #include <linux/dma-mapping.h>
27 #include <linux/spinlock.h>
28 #include <linux/gpio.h>
29 #include <plat/usb.h>
30
31 #define USBHS_DRIVER_NAME       "usbhs-omap"
32 #define OMAP_EHCI_DEVICE        "ehci-omap"
33 #define OMAP_OHCI_DEVICE        "ohci-omap3"
34
35 /* OMAP USBHOST Register addresses  */
36
37 /* TLL Register Set */
38 #define OMAP_USBTLL_REVISION                            (0x00)
39 #define OMAP_USBTLL_SYSCONFIG                           (0x10)
40 #define OMAP_USBTLL_SYSCONFIG_CACTIVITY                 (1 << 8)
41 #define OMAP_USBTLL_SYSCONFIG_SIDLEMODE                 (1 << 3)
42 #define OMAP_USBTLL_SYSCONFIG_ENAWAKEUP                 (1 << 2)
43 #define OMAP_USBTLL_SYSCONFIG_SOFTRESET                 (1 << 1)
44 #define OMAP_USBTLL_SYSCONFIG_AUTOIDLE                  (1 << 0)
45
46 #define OMAP_USBTLL_SYSSTATUS                           (0x14)
47 #define OMAP_USBTLL_SYSSTATUS_RESETDONE                 (1 << 0)
48
49 #define OMAP_USBTLL_IRQSTATUS                           (0x18)
50 #define OMAP_USBTLL_IRQENABLE                           (0x1C)
51
52 #define OMAP_TLL_SHARED_CONF                            (0x30)
53 #define OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN             (1 << 6)
54 #define OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN            (1 << 5)
55 #define OMAP_TLL_SHARED_CONF_USB_DIVRATION              (1 << 2)
56 #define OMAP_TLL_SHARED_CONF_FCLK_REQ                   (1 << 1)
57 #define OMAP_TLL_SHARED_CONF_FCLK_IS_ON                 (1 << 0)
58
59 #define OMAP_TLL_CHANNEL_CONF(num)                      (0x040 + 0x004 * num)
60 #define OMAP_TLL_CHANNEL_CONF_FSLSMODE_SHIFT            24
61 #define OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF            (1 << 11)
62 #define OMAP_TLL_CHANNEL_CONF_ULPI_ULPIAUTOIDLE         (1 << 10)
63 #define OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE              (1 << 9)
64 #define OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE               (1 << 8)
65 #define OMAP_TLL_CHANNEL_CONF_CHANMODE_FSLS             (1 << 1)
66 #define OMAP_TLL_CHANNEL_CONF_CHANEN                    (1 << 0)
67
68 #define OMAP_TLL_FSLSMODE_6PIN_PHY_DAT_SE0              0x0
69 #define OMAP_TLL_FSLSMODE_6PIN_PHY_DP_DM                0x1
70 #define OMAP_TLL_FSLSMODE_3PIN_PHY                      0x2
71 #define OMAP_TLL_FSLSMODE_4PIN_PHY                      0x3
72 #define OMAP_TLL_FSLSMODE_6PIN_TLL_DAT_SE0              0x4
73 #define OMAP_TLL_FSLSMODE_6PIN_TLL_DP_DM                0x5
74 #define OMAP_TLL_FSLSMODE_3PIN_TLL                      0x6
75 #define OMAP_TLL_FSLSMODE_4PIN_TLL                      0x7
76 #define OMAP_TLL_FSLSMODE_2PIN_TLL_DAT_SE0              0xA
77 #define OMAP_TLL_FSLSMODE_2PIN_DAT_DP_DM                0xB
78
79 #define OMAP_TLL_ULPI_FUNCTION_CTRL(num)                (0x804 + 0x100 * num)
80 #define OMAP_TLL_ULPI_INTERFACE_CTRL(num)               (0x807 + 0x100 * num)
81 #define OMAP_TLL_ULPI_OTG_CTRL(num)                     (0x80A + 0x100 * num)
82 #define OMAP_TLL_ULPI_INT_EN_RISE(num)                  (0x80D + 0x100 * num)
83 #define OMAP_TLL_ULPI_INT_EN_FALL(num)                  (0x810 + 0x100 * num)
84 #define OMAP_TLL_ULPI_INT_STATUS(num)                   (0x813 + 0x100 * num)
85 #define OMAP_TLL_ULPI_INT_LATCH(num)                    (0x814 + 0x100 * num)
86 #define OMAP_TLL_ULPI_DEBUG(num)                        (0x815 + 0x100 * num)
87 #define OMAP_TLL_ULPI_SCRATCH_REGISTER(num)             (0x816 + 0x100 * num)
88
89 #define OMAP_TLL_CHANNEL_COUNT                          3
90 #define OMAP_TLL_CHANNEL_1_EN_MASK                      (1 << 0)
91 #define OMAP_TLL_CHANNEL_2_EN_MASK                      (1 << 1)
92 #define OMAP_TLL_CHANNEL_3_EN_MASK                      (1 << 2)
93
94 /* UHH Register Set */
95 #define OMAP_UHH_REVISION                               (0x00)
96 #define OMAP_UHH_SYSCONFIG                              (0x10)
97 #define OMAP_UHH_SYSCONFIG_MIDLEMODE                    (1 << 12)
98 #define OMAP_UHH_SYSCONFIG_CACTIVITY                    (1 << 8)
99 #define OMAP_UHH_SYSCONFIG_SIDLEMODE                    (1 << 3)
100 #define OMAP_UHH_SYSCONFIG_ENAWAKEUP                    (1 << 2)
101 #define OMAP_UHH_SYSCONFIG_SOFTRESET                    (1 << 1)
102 #define OMAP_UHH_SYSCONFIG_AUTOIDLE                     (1 << 0)
103
104 #define OMAP_UHH_SYSSTATUS                              (0x14)
105 #define OMAP_UHH_HOSTCONFIG                             (0x40)
106 #define OMAP_UHH_HOSTCONFIG_ULPI_BYPASS                 (1 << 0)
107 #define OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS              (1 << 0)
108 #define OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS              (1 << 11)
109 #define OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS              (1 << 12)
110 #define OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN              (1 << 2)
111 #define OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN              (1 << 3)
112 #define OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN             (1 << 4)
113 #define OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN              (1 << 5)
114 #define OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS           (1 << 8)
115 #define OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS           (1 << 9)
116 #define OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS           (1 << 10)
117 #define OMAP4_UHH_HOSTCONFIG_APP_START_CLK              (1 << 31)
118
119 /* OMAP4-specific defines */
120 #define OMAP4_UHH_SYSCONFIG_IDLEMODE_CLEAR              (3 << 2)
121 #define OMAP4_UHH_SYSCONFIG_NOIDLE                      (1 << 2)
122 #define OMAP4_UHH_SYSCONFIG_STDBYMODE_CLEAR             (3 << 4)
123 #define OMAP4_UHH_SYSCONFIG_NOSTDBY                     (1 << 4)
124 #define OMAP4_UHH_SYSCONFIG_SOFTRESET                   (1 << 0)
125
126 #define OMAP4_P1_MODE_CLEAR                             (3 << 16)
127 #define OMAP4_P1_MODE_TLL                               (1 << 16)
128 #define OMAP4_P1_MODE_HSIC                              (3 << 16)
129 #define OMAP4_P2_MODE_CLEAR                             (3 << 18)
130 #define OMAP4_P2_MODE_TLL                               (1 << 18)
131 #define OMAP4_P2_MODE_HSIC                              (3 << 18)
132
133 #define OMAP_REV2_TLL_CHANNEL_COUNT                     2
134
135 #define OMAP_UHH_DEBUG_CSR                              (0x44)
136
137 /* Values of UHH_REVISION - Note: these are not given in the TRM */
138 #define OMAP_USBHS_REV1         0x00000010      /* OMAP3 */
139 #define OMAP_USBHS_REV2         0x50700100      /* OMAP4 */
140
141 #define is_omap_usbhs_rev1(x)   (x->usbhs_rev == OMAP_USBHS_REV1)
142 #define is_omap_usbhs_rev2(x)   (x->usbhs_rev == OMAP_USBHS_REV2)
143
144 #define is_ehci_phy_mode(x)     (x == OMAP_EHCI_PORT_MODE_PHY)
145 #define is_ehci_tll_mode(x)     (x == OMAP_EHCI_PORT_MODE_TLL)
146 #define is_ehci_hsic_mode(x)    (x == OMAP_EHCI_PORT_MODE_HSIC)
147
148
149 struct usbhs_hcd_omap {
150         struct clk                      *usbhost_ick;
151         struct clk                      *usbhost_hs_fck;
152         struct clk                      *usbhost_fs_fck;
153         struct clk                      *xclk60mhsp1_ck;
154         struct clk                      *xclk60mhsp2_ck;
155         struct clk                      *utmi_p1_fck;
156         struct clk                      *usbhost_p1_fck;
157         struct clk                      *usbtll_p1_fck;
158         struct clk                      *utmi_p2_fck;
159         struct clk                      *usbhost_p2_fck;
160         struct clk                      *usbtll_p2_fck;
161         struct clk                      *init_60m_fclk;
162         struct clk                      *usbtll_fck;
163         struct clk                      *usbtll_ick;
164
165         void __iomem                    *uhh_base;
166         void __iomem                    *tll_base;
167
168         struct usbhs_omap_platform_data platdata;
169
170         u32                             usbhs_rev;
171         spinlock_t                      lock;
172         int                             count;
173 };
174 /*-------------------------------------------------------------------------*/
175
176 const char usbhs_driver_name[] = USBHS_DRIVER_NAME;
177 static u64 usbhs_dmamask = ~(u32)0;
178
179 /*-------------------------------------------------------------------------*/
180
181 static inline void usbhs_write(void __iomem *base, u32 reg, u32 val)
182 {
183         __raw_writel(val, base + reg);
184 }
185
186 static inline u32 usbhs_read(void __iomem *base, u32 reg)
187 {
188         return __raw_readl(base + reg);
189 }
190
191 static inline void usbhs_writeb(void __iomem *base, u8 reg, u8 val)
192 {
193         __raw_writeb(val, base + reg);
194 }
195
196 static inline u8 usbhs_readb(void __iomem *base, u8 reg)
197 {
198         return __raw_readb(base + reg);
199 }
200
201 /*-------------------------------------------------------------------------*/
202
203 static struct platform_device *omap_usbhs_alloc_child(const char *name,
204                         struct resource *res, int num_resources, void *pdata,
205                         size_t pdata_size, struct device *dev)
206 {
207         struct platform_device  *child;
208         int                     ret;
209
210         child = platform_device_alloc(name, 0);
211
212         if (!child) {
213                 dev_err(dev, "platform_device_alloc %s failed\n", name);
214                 goto err_end;
215         }
216
217         ret = platform_device_add_resources(child, res, num_resources);
218         if (ret) {
219                 dev_err(dev, "platform_device_add_resources failed\n");
220                 goto err_alloc;
221         }
222
223         ret = platform_device_add_data(child, pdata, pdata_size);
224         if (ret) {
225                 dev_err(dev, "platform_device_add_data failed\n");
226                 goto err_alloc;
227         }
228
229         child->dev.dma_mask             = &usbhs_dmamask;
230         child->dev.coherent_dma_mask    = 0xffffffff;
231         child->dev.parent               = dev;
232
233         ret = platform_device_add(child);
234         if (ret) {
235                 dev_err(dev, "platform_device_add failed\n");
236                 goto err_alloc;
237         }
238
239         return child;
240
241 err_alloc:
242         platform_device_put(child);
243
244 err_end:
245         return NULL;
246 }
247
248 static int omap_usbhs_alloc_children(struct platform_device *pdev)
249 {
250         struct device                           *dev = &pdev->dev;
251         struct usbhs_hcd_omap                   *omap;
252         struct ehci_hcd_omap_platform_data      *ehci_data;
253         struct ohci_hcd_omap_platform_data      *ohci_data;
254         struct platform_device                  *ehci;
255         struct platform_device                  *ohci;
256         struct resource                         *res;
257         struct resource                         resources[2];
258         int                                     ret;
259
260         omap = platform_get_drvdata(pdev);
261         ehci_data = omap->platdata.ehci_data;
262         ohci_data = omap->platdata.ohci_data;
263
264         res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ehci");
265         if (!res) {
266                 dev_err(dev, "EHCI get resource IORESOURCE_MEM failed\n");
267                 ret = -ENODEV;
268                 goto err_end;
269         }
270         resources[0] = *res;
271
272         res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "ehci-irq");
273         if (!res) {
274                 dev_err(dev, " EHCI get resource IORESOURCE_IRQ failed\n");
275                 ret = -ENODEV;
276                 goto err_end;
277         }
278         resources[1] = *res;
279
280         ehci = omap_usbhs_alloc_child(OMAP_EHCI_DEVICE, resources, 2, ehci_data,
281                 sizeof(*ehci_data), dev);
282
283         if (!ehci) {
284                 dev_err(dev, "omap_usbhs_alloc_child failed\n");
285                 ret = -ENOMEM;
286                 goto err_end;
287         }
288
289         res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ohci");
290         if (!res) {
291                 dev_err(dev, "OHCI get resource IORESOURCE_MEM failed\n");
292                 ret = -ENODEV;
293                 goto err_ehci;
294         }
295         resources[0] = *res;
296
297         res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "ohci-irq");
298         if (!res) {
299                 dev_err(dev, "OHCI get resource IORESOURCE_IRQ failed\n");
300                 ret = -ENODEV;
301                 goto err_ehci;
302         }
303         resources[1] = *res;
304
305         ohci = omap_usbhs_alloc_child(OMAP_OHCI_DEVICE, resources, 2, ohci_data,
306                 sizeof(*ohci_data), dev);
307         if (!ohci) {
308                 dev_err(dev, "omap_usbhs_alloc_child failed\n");
309                 ret = -ENOMEM;
310                 goto err_ehci;
311         }
312
313         return 0;
314
315 err_ehci:
316         platform_device_unregister(ehci);
317
318 err_end:
319         return ret;
320 }
321
322 /**
323  * usbhs_omap_probe - initialize TI-based HCDs
324  *
325  * Allocates basic resources for this USB host controller.
326  */
327 static int __devinit usbhs_omap_probe(struct platform_device *pdev)
328 {
329         struct device                   *dev =  &pdev->dev;
330         struct usbhs_omap_platform_data *pdata = dev->platform_data;
331         struct usbhs_hcd_omap           *omap;
332         struct resource                 *res;
333         int                             ret = 0;
334         int                             i;
335
336         if (!pdata) {
337                 dev_err(dev, "Missing platform data\n");
338                 ret = -ENOMEM;
339                 goto end_probe;
340         }
341
342         omap = kzalloc(sizeof(*omap), GFP_KERNEL);
343         if (!omap) {
344                 dev_err(dev, "Memory allocation failed\n");
345                 ret = -ENOMEM;
346                 goto end_probe;
347         }
348
349         spin_lock_init(&omap->lock);
350
351         for (i = 0; i < OMAP3_HS_USB_PORTS; i++)
352                 omap->platdata.port_mode[i] = pdata->port_mode[i];
353
354         omap->platdata.ehci_data = pdata->ehci_data;
355         omap->platdata.ohci_data = pdata->ohci_data;
356
357         omap->usbhost_ick = clk_get(dev, "usbhost_ick");
358         if (IS_ERR(omap->usbhost_ick)) {
359                 ret =  PTR_ERR(omap->usbhost_ick);
360                 dev_err(dev, "usbhost_ick failed error:%d\n", ret);
361                 goto err_end;
362         }
363
364         omap->usbhost_hs_fck = clk_get(dev, "hs_fck");
365         if (IS_ERR(omap->usbhost_hs_fck)) {
366                 ret = PTR_ERR(omap->usbhost_hs_fck);
367                 dev_err(dev, "usbhost_hs_fck failed error:%d\n", ret);
368                 goto err_usbhost_ick;
369         }
370
371         omap->usbhost_fs_fck = clk_get(dev, "fs_fck");
372         if (IS_ERR(omap->usbhost_fs_fck)) {
373                 ret = PTR_ERR(omap->usbhost_fs_fck);
374                 dev_err(dev, "usbhost_fs_fck failed error:%d\n", ret);
375                 goto err_usbhost_hs_fck;
376         }
377
378         omap->usbtll_fck = clk_get(dev, "usbtll_fck");
379         if (IS_ERR(omap->usbtll_fck)) {
380                 ret = PTR_ERR(omap->usbtll_fck);
381                 dev_err(dev, "usbtll_fck failed error:%d\n", ret);
382                 goto err_usbhost_fs_fck;
383         }
384
385         omap->usbtll_ick = clk_get(dev, "usbtll_ick");
386         if (IS_ERR(omap->usbtll_ick)) {
387                 ret = PTR_ERR(omap->usbtll_ick);
388                 dev_err(dev, "usbtll_ick failed error:%d\n", ret);
389                 goto err_usbtll_fck;
390         }
391
392         omap->utmi_p1_fck = clk_get(dev, "utmi_p1_gfclk");
393         if (IS_ERR(omap->utmi_p1_fck)) {
394                 ret = PTR_ERR(omap->utmi_p1_fck);
395                 dev_err(dev, "utmi_p1_gfclk failed error:%d\n", ret);
396                 goto err_usbtll_ick;
397         }
398
399         omap->xclk60mhsp1_ck = clk_get(dev, "xclk60mhsp1_ck");
400         if (IS_ERR(omap->xclk60mhsp1_ck)) {
401                 ret = PTR_ERR(omap->xclk60mhsp1_ck);
402                 dev_err(dev, "xclk60mhsp1_ck failed error:%d\n", ret);
403                 goto err_utmi_p1_fck;
404         }
405
406         omap->utmi_p2_fck = clk_get(dev, "utmi_p2_gfclk");
407         if (IS_ERR(omap->utmi_p2_fck)) {
408                 ret = PTR_ERR(omap->utmi_p2_fck);
409                 dev_err(dev, "utmi_p2_gfclk failed error:%d\n", ret);
410                 goto err_xclk60mhsp1_ck;
411         }
412
413         omap->xclk60mhsp2_ck = clk_get(dev, "xclk60mhsp2_ck");
414         if (IS_ERR(omap->xclk60mhsp2_ck)) {
415                 ret = PTR_ERR(omap->xclk60mhsp2_ck);
416                 dev_err(dev, "xclk60mhsp2_ck failed error:%d\n", ret);
417                 goto err_utmi_p2_fck;
418         }
419
420         omap->usbhost_p1_fck = clk_get(dev, "usb_host_hs_utmi_p1_clk");
421         if (IS_ERR(omap->usbhost_p1_fck)) {
422                 ret = PTR_ERR(omap->usbhost_p1_fck);
423                 dev_err(dev, "usbhost_p1_fck failed error:%d\n", ret);
424                 goto err_xclk60mhsp2_ck;
425         }
426
427         omap->usbtll_p1_fck = clk_get(dev, "usb_tll_hs_usb_ch0_clk");
428         if (IS_ERR(omap->usbtll_p1_fck)) {
429                 ret = PTR_ERR(omap->usbtll_p1_fck);
430                 dev_err(dev, "usbtll_p1_fck failed error:%d\n", ret);
431                 goto err_usbhost_p1_fck;
432         }
433
434         omap->usbhost_p2_fck = clk_get(dev, "usb_host_hs_utmi_p2_clk");
435         if (IS_ERR(omap->usbhost_p2_fck)) {
436                 ret = PTR_ERR(omap->usbhost_p2_fck);
437                 dev_err(dev, "usbhost_p2_fck failed error:%d\n", ret);
438                 goto err_usbtll_p1_fck;
439         }
440
441         omap->usbtll_p2_fck = clk_get(dev, "usb_tll_hs_usb_ch1_clk");
442         if (IS_ERR(omap->usbtll_p2_fck)) {
443                 ret = PTR_ERR(omap->usbtll_p2_fck);
444                 dev_err(dev, "usbtll_p2_fck failed error:%d\n", ret);
445                 goto err_usbhost_p2_fck;
446         }
447
448         omap->init_60m_fclk = clk_get(dev, "init_60m_fclk");
449         if (IS_ERR(omap->init_60m_fclk)) {
450                 ret = PTR_ERR(omap->init_60m_fclk);
451                 dev_err(dev, "init_60m_fclk failed error:%d\n", ret);
452                 goto err_usbtll_p2_fck;
453         }
454
455         res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "uhh");
456         if (!res) {
457                 dev_err(dev, "UHH EHCI get resource failed\n");
458                 ret = -ENODEV;
459                 goto err_init_60m_fclk;
460         }
461
462         omap->uhh_base = ioremap(res->start, resource_size(res));
463         if (!omap->uhh_base) {
464                 dev_err(dev, "UHH ioremap failed\n");
465                 ret = -ENOMEM;
466                 goto err_init_60m_fclk;
467         }
468
469         res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "tll");
470         if (!res) {
471                 dev_err(dev, "UHH EHCI get resource failed\n");
472                 ret = -ENODEV;
473                 goto err_tll;
474         }
475
476         omap->tll_base = ioremap(res->start, resource_size(res));
477         if (!omap->tll_base) {
478                 dev_err(dev, "TLL ioremap failed\n");
479                 ret = -ENOMEM;
480                 goto err_tll;
481         }
482
483         platform_set_drvdata(pdev, omap);
484
485         ret = omap_usbhs_alloc_children(pdev);
486         if (ret) {
487                 dev_err(dev, "omap_usbhs_alloc_children failed\n");
488                 goto err_alloc;
489         }
490
491         goto end_probe;
492
493 err_alloc:
494         iounmap(omap->tll_base);
495
496 err_tll:
497         iounmap(omap->uhh_base);
498
499 err_init_60m_fclk:
500         clk_put(omap->init_60m_fclk);
501
502 err_usbtll_p2_fck:
503         clk_put(omap->usbtll_p2_fck);
504
505 err_usbhost_p2_fck:
506         clk_put(omap->usbhost_p2_fck);
507
508 err_usbtll_p1_fck:
509         clk_put(omap->usbtll_p1_fck);
510
511 err_usbhost_p1_fck:
512         clk_put(omap->usbhost_p1_fck);
513
514 err_xclk60mhsp2_ck:
515         clk_put(omap->xclk60mhsp2_ck);
516
517 err_utmi_p2_fck:
518         clk_put(omap->utmi_p2_fck);
519
520 err_xclk60mhsp1_ck:
521         clk_put(omap->xclk60mhsp1_ck);
522
523 err_utmi_p1_fck:
524         clk_put(omap->utmi_p1_fck);
525
526 err_usbtll_ick:
527         clk_put(omap->usbtll_ick);
528
529 err_usbtll_fck:
530         clk_put(omap->usbtll_fck);
531
532 err_usbhost_fs_fck:
533         clk_put(omap->usbhost_fs_fck);
534
535 err_usbhost_hs_fck:
536         clk_put(omap->usbhost_hs_fck);
537
538 err_usbhost_ick:
539         clk_put(omap->usbhost_ick);
540
541 err_end:
542         kfree(omap);
543
544 end_probe:
545         return ret;
546 }
547
548 /**
549  * usbhs_omap_remove - shutdown processing for UHH & TLL HCDs
550  * @pdev: USB Host Controller being removed
551  *
552  * Reverses the effect of usbhs_omap_probe().
553  */
554 static int __devexit usbhs_omap_remove(struct platform_device *pdev)
555 {
556         struct usbhs_hcd_omap *omap = platform_get_drvdata(pdev);
557
558         if (omap->count != 0) {
559                 dev_err(&pdev->dev,
560                         "Either EHCI or OHCI is still using usbhs core\n");
561                 return -EBUSY;
562         }
563
564         iounmap(omap->tll_base);
565         iounmap(omap->uhh_base);
566         clk_put(omap->init_60m_fclk);
567         clk_put(omap->usbtll_p2_fck);
568         clk_put(omap->usbhost_p2_fck);
569         clk_put(omap->usbtll_p1_fck);
570         clk_put(omap->usbhost_p1_fck);
571         clk_put(omap->xclk60mhsp2_ck);
572         clk_put(omap->utmi_p2_fck);
573         clk_put(omap->xclk60mhsp1_ck);
574         clk_put(omap->utmi_p1_fck);
575         clk_put(omap->usbtll_ick);
576         clk_put(omap->usbtll_fck);
577         clk_put(omap->usbhost_fs_fck);
578         clk_put(omap->usbhost_hs_fck);
579         clk_put(omap->usbhost_ick);
580         kfree(omap);
581
582         return 0;
583 }
584
585 static bool is_ohci_port(enum usbhs_omap_port_mode pmode)
586 {
587         switch (pmode) {
588         case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
589         case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
590         case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
591         case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
592         case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
593         case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
594         case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
595         case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
596         case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
597         case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
598                 return true;
599
600         default:
601                 return false;
602         }
603 }
604
605 /*
606  * convert the port-mode enum to a value we can use in the FSLSMODE
607  * field of USBTLL_CHANNEL_CONF
608  */
609 static unsigned ohci_omap3_fslsmode(enum usbhs_omap_port_mode mode)
610 {
611         switch (mode) {
612         case OMAP_USBHS_PORT_MODE_UNUSED:
613         case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
614                 return OMAP_TLL_FSLSMODE_6PIN_PHY_DAT_SE0;
615
616         case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
617                 return OMAP_TLL_FSLSMODE_6PIN_PHY_DP_DM;
618
619         case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
620                 return OMAP_TLL_FSLSMODE_3PIN_PHY;
621
622         case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
623                 return OMAP_TLL_FSLSMODE_4PIN_PHY;
624
625         case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
626                 return OMAP_TLL_FSLSMODE_6PIN_TLL_DAT_SE0;
627
628         case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
629                 return OMAP_TLL_FSLSMODE_6PIN_TLL_DP_DM;
630
631         case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
632                 return OMAP_TLL_FSLSMODE_3PIN_TLL;
633
634         case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
635                 return OMAP_TLL_FSLSMODE_4PIN_TLL;
636
637         case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
638                 return OMAP_TLL_FSLSMODE_2PIN_TLL_DAT_SE0;
639
640         case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
641                 return OMAP_TLL_FSLSMODE_2PIN_DAT_DP_DM;
642         default:
643                 pr_warning("Invalid port mode, using default\n");
644                 return OMAP_TLL_FSLSMODE_6PIN_PHY_DAT_SE0;
645         }
646 }
647
648 static void usbhs_omap_tll_init(struct device *dev, u8 tll_channel_count)
649 {
650         struct usbhs_hcd_omap           *omap = dev_get_drvdata(dev);
651         struct usbhs_omap_platform_data *pdata = dev->platform_data;
652         unsigned                        reg;
653         int                             i;
654
655         /* Program Common TLL register */
656         reg = usbhs_read(omap->tll_base, OMAP_TLL_SHARED_CONF);
657         reg |= (OMAP_TLL_SHARED_CONF_FCLK_IS_ON
658                 | OMAP_TLL_SHARED_CONF_USB_DIVRATION);
659         reg &= ~OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN;
660         reg &= ~OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN;
661
662         usbhs_write(omap->tll_base, OMAP_TLL_SHARED_CONF, reg);
663
664         /* Enable channels now */
665         for (i = 0; i < tll_channel_count; i++) {
666                 reg = usbhs_read(omap->tll_base,
667                                 OMAP_TLL_CHANNEL_CONF(i));
668
669                 if (is_ohci_port(pdata->port_mode[i])) {
670                         reg |= ohci_omap3_fslsmode(pdata->port_mode[i])
671                                 << OMAP_TLL_CHANNEL_CONF_FSLSMODE_SHIFT;
672                         reg |= OMAP_TLL_CHANNEL_CONF_CHANMODE_FSLS;
673                 } else if (pdata->port_mode[i] == OMAP_EHCI_PORT_MODE_TLL) {
674
675                         /* Disable AutoIdle, BitStuffing and use SDR Mode */
676                         reg &= ~(OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE
677                                 | OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF
678                                 | OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE);
679
680                 } else
681                         continue;
682
683                 reg |= OMAP_TLL_CHANNEL_CONF_CHANEN;
684                 usbhs_write(omap->tll_base,
685                                 OMAP_TLL_CHANNEL_CONF(i), reg);
686
687                 usbhs_writeb(omap->tll_base,
688                                 OMAP_TLL_ULPI_SCRATCH_REGISTER(i), 0xbe);
689         }
690 }
691
692 static int usbhs_enable(struct device *dev)
693 {
694         struct usbhs_hcd_omap           *omap = dev_get_drvdata(dev);
695         struct usbhs_omap_platform_data *pdata = &omap->platdata;
696         unsigned long                   flags = 0;
697         int                             ret = 0;
698         unsigned long                   timeout;
699         unsigned                        reg;
700
701         dev_dbg(dev, "starting TI HSUSB Controller\n");
702         if (!pdata) {
703                 dev_dbg(dev, "missing platform_data\n");
704                 return  -ENODEV;
705         }
706
707         spin_lock_irqsave(&omap->lock, flags);
708         if (omap->count > 0)
709                 goto end_count;
710
711         clk_enable(omap->usbhost_ick);
712         clk_enable(omap->usbhost_hs_fck);
713         clk_enable(omap->usbhost_fs_fck);
714         clk_enable(omap->usbtll_fck);
715         clk_enable(omap->usbtll_ick);
716
717         if (pdata->ehci_data->phy_reset) {
718                 if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0])) {
719                         gpio_request(pdata->ehci_data->reset_gpio_port[0],
720                                                 "USB1 PHY reset");
721                         gpio_direction_output
722                                 (pdata->ehci_data->reset_gpio_port[0], 0);
723                 }
724
725                 if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1])) {
726                         gpio_request(pdata->ehci_data->reset_gpio_port[1],
727                                                 "USB2 PHY reset");
728                         gpio_direction_output
729                                 (pdata->ehci_data->reset_gpio_port[1], 0);
730                 }
731
732                 /* Hold the PHY in RESET for enough time till DIR is high */
733                 udelay(10);
734         }
735
736         omap->usbhs_rev = usbhs_read(omap->uhh_base, OMAP_UHH_REVISION);
737         dev_dbg(dev, "OMAP UHH_REVISION 0x%x\n", omap->usbhs_rev);
738
739         /* perform TLL soft reset, and wait until reset is complete */
740         usbhs_write(omap->tll_base, OMAP_USBTLL_SYSCONFIG,
741                         OMAP_USBTLL_SYSCONFIG_SOFTRESET);
742
743         /* Wait for TLL reset to complete */
744         timeout = jiffies + msecs_to_jiffies(1000);
745         while (!(usbhs_read(omap->tll_base, OMAP_USBTLL_SYSSTATUS)
746                         & OMAP_USBTLL_SYSSTATUS_RESETDONE)) {
747                 cpu_relax();
748
749                 if (time_after(jiffies, timeout)) {
750                         dev_dbg(dev, "operation timed out\n");
751                         ret = -EINVAL;
752                         goto err_tll;
753                 }
754         }
755
756         dev_dbg(dev, "TLL RESET DONE\n");
757
758         /* (1<<3) = no idle mode only for initial debugging */
759         usbhs_write(omap->tll_base, OMAP_USBTLL_SYSCONFIG,
760                         OMAP_USBTLL_SYSCONFIG_ENAWAKEUP |
761                         OMAP_USBTLL_SYSCONFIG_SIDLEMODE |
762                         OMAP_USBTLL_SYSCONFIG_AUTOIDLE);
763
764         /* Put UHH in NoIdle/NoStandby mode */
765         reg = usbhs_read(omap->uhh_base, OMAP_UHH_SYSCONFIG);
766         if (is_omap_usbhs_rev1(omap)) {
767                 reg |= (OMAP_UHH_SYSCONFIG_ENAWAKEUP
768                                 | OMAP_UHH_SYSCONFIG_SIDLEMODE
769                                 | OMAP_UHH_SYSCONFIG_CACTIVITY
770                                 | OMAP_UHH_SYSCONFIG_MIDLEMODE);
771                 reg &= ~OMAP_UHH_SYSCONFIG_AUTOIDLE;
772
773
774         } else if (is_omap_usbhs_rev2(omap)) {
775                 reg &= ~OMAP4_UHH_SYSCONFIG_IDLEMODE_CLEAR;
776                 reg |= OMAP4_UHH_SYSCONFIG_NOIDLE;
777                 reg &= ~OMAP4_UHH_SYSCONFIG_STDBYMODE_CLEAR;
778                 reg |= OMAP4_UHH_SYSCONFIG_NOSTDBY;
779         }
780
781         usbhs_write(omap->uhh_base, OMAP_UHH_SYSCONFIG, reg);
782
783         reg = usbhs_read(omap->uhh_base, OMAP_UHH_HOSTCONFIG);
784         /* setup ULPI bypass and burst configurations */
785         reg |= (OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN
786                         | OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN
787                         | OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN);
788         reg |= OMAP4_UHH_HOSTCONFIG_APP_START_CLK;
789         reg &= ~OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN;
790
791         if (is_omap_usbhs_rev1(omap)) {
792                 if (pdata->port_mode[0] == OMAP_USBHS_PORT_MODE_UNUSED)
793                         reg &= ~OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS;
794                 if (pdata->port_mode[1] == OMAP_USBHS_PORT_MODE_UNUSED)
795                         reg &= ~OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS;
796                 if (pdata->port_mode[2] == OMAP_USBHS_PORT_MODE_UNUSED)
797                         reg &= ~OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS;
798
799                 /* Bypass the TLL module for PHY mode operation */
800                 if (cpu_is_omap3430() && (omap_rev() <= OMAP3430_REV_ES2_1)) {
801                         dev_dbg(dev, "OMAP3 ES version <= ES2.1\n");
802                         if (is_ehci_phy_mode(pdata->port_mode[0]) ||
803                                 is_ehci_phy_mode(pdata->port_mode[1]) ||
804                                         is_ehci_phy_mode(pdata->port_mode[2]))
805                                 reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_BYPASS;
806                         else
807                                 reg |= OMAP_UHH_HOSTCONFIG_ULPI_BYPASS;
808                 } else {
809                         dev_dbg(dev, "OMAP3 ES version > ES2.1\n");
810                         if (is_ehci_phy_mode(pdata->port_mode[0]))
811                                 reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
812                         else
813                                 reg |= OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
814                         if (is_ehci_phy_mode(pdata->port_mode[1]))
815                                 reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS;
816                         else
817                                 reg |= OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS;
818                         if (is_ehci_phy_mode(pdata->port_mode[2]))
819                                 reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS;
820                         else
821                                 reg |= OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS;
822                 }
823         } else if (is_omap_usbhs_rev2(omap)) {
824                 /* Clear port mode fields for PHY mode*/
825                 reg &= ~OMAP4_P1_MODE_CLEAR;
826                 reg &= ~OMAP4_P2_MODE_CLEAR;
827
828                 if (is_ehci_phy_mode(pdata->port_mode[0])) {
829                         ret = clk_set_parent(omap->utmi_p1_fck,
830                                                 omap->xclk60mhsp1_ck);
831                         if (ret != 0) {
832                                 dev_err(dev, "xclk60mhsp1_ck set parent"
833                                 "failed error:%d\n", ret);
834                                 goto err_tll;
835                         }
836                 } else if (is_ehci_tll_mode(pdata->port_mode[0])) {
837                         ret = clk_set_parent(omap->utmi_p1_fck,
838                                                 omap->init_60m_fclk);
839                         if (ret != 0) {
840                                 dev_err(dev, "init_60m_fclk set parent"
841                                 "failed error:%d\n", ret);
842                                 goto err_tll;
843                         }
844                         clk_enable(omap->usbhost_p1_fck);
845                         clk_enable(omap->usbtll_p1_fck);
846                 }
847
848                 if (is_ehci_phy_mode(pdata->port_mode[1])) {
849                         ret = clk_set_parent(omap->utmi_p2_fck,
850                                                 omap->xclk60mhsp2_ck);
851                         if (ret != 0) {
852                                 dev_err(dev, "xclk60mhsp1_ck set parent"
853                                         "failed error:%d\n", ret);
854                                 goto err_tll;
855                         }
856                 } else if (is_ehci_tll_mode(pdata->port_mode[1])) {
857                         ret = clk_set_parent(omap->utmi_p2_fck,
858                                                 omap->init_60m_fclk);
859                         if (ret != 0) {
860                                 dev_err(dev, "init_60m_fclk set parent"
861                                 "failed error:%d\n", ret);
862                                 goto err_tll;
863                         }
864                         clk_enable(omap->usbhost_p2_fck);
865                         clk_enable(omap->usbtll_p2_fck);
866                 }
867
868                 clk_enable(omap->utmi_p1_fck);
869                 clk_enable(omap->utmi_p2_fck);
870
871                 if (is_ehci_tll_mode(pdata->port_mode[0]) ||
872                         (is_ohci_port(pdata->port_mode[0])))
873                         reg |= OMAP4_P1_MODE_TLL;
874                 else if (is_ehci_hsic_mode(pdata->port_mode[0]))
875                         reg |= OMAP4_P1_MODE_HSIC;
876
877                 if (is_ehci_tll_mode(pdata->port_mode[1]) ||
878                         (is_ohci_port(pdata->port_mode[1])))
879                         reg |= OMAP4_P2_MODE_TLL;
880                 else if (is_ehci_hsic_mode(pdata->port_mode[1]))
881                         reg |= OMAP4_P2_MODE_HSIC;
882         }
883
884         usbhs_write(omap->uhh_base, OMAP_UHH_HOSTCONFIG, reg);
885         dev_dbg(dev, "UHH setup done, uhh_hostconfig=%x\n", reg);
886
887         if (is_ehci_tll_mode(pdata->port_mode[0]) ||
888                 is_ehci_tll_mode(pdata->port_mode[1]) ||
889                 is_ehci_tll_mode(pdata->port_mode[2]) ||
890                 (is_ohci_port(pdata->port_mode[0])) ||
891                 (is_ohci_port(pdata->port_mode[1])) ||
892                 (is_ohci_port(pdata->port_mode[2]))) {
893
894                 /* Enable UTMI mode for required TLL channels */
895                 if (is_omap_usbhs_rev2(omap))
896                         usbhs_omap_tll_init(dev, OMAP_REV2_TLL_CHANNEL_COUNT);
897                 else
898                         usbhs_omap_tll_init(dev, OMAP_TLL_CHANNEL_COUNT);
899         }
900
901         if (pdata->ehci_data->phy_reset) {
902                 /* Hold the PHY in RESET for enough time till
903                  * PHY is settled and ready
904                  */
905                 udelay(10);
906
907                 if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0]))
908                         gpio_set_value
909                                 (pdata->ehci_data->reset_gpio_port[0], 1);
910
911                 if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1]))
912                         gpio_set_value
913                                 (pdata->ehci_data->reset_gpio_port[1], 1);
914         }
915
916 end_count:
917         omap->count++;
918         spin_unlock_irqrestore(&omap->lock, flags);
919         return 0;
920
921 err_tll:
922         if (pdata->ehci_data->phy_reset) {
923                 if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0]))
924                         gpio_free(pdata->ehci_data->reset_gpio_port[0]);
925
926                 if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1]))
927                         gpio_free(pdata->ehci_data->reset_gpio_port[1]);
928         }
929
930         clk_disable(omap->usbtll_ick);
931         clk_disable(omap->usbtll_fck);
932         clk_disable(omap->usbhost_fs_fck);
933         clk_disable(omap->usbhost_hs_fck);
934         clk_disable(omap->usbhost_ick);
935         spin_unlock_irqrestore(&omap->lock, flags);
936         return ret;
937 }
938
939 static void usbhs_disable(struct device *dev)
940 {
941         struct usbhs_hcd_omap           *omap = dev_get_drvdata(dev);
942         struct usbhs_omap_platform_data *pdata = &omap->platdata;
943         unsigned long                   flags = 0;
944         unsigned long                   timeout;
945
946         dev_dbg(dev, "stopping TI HSUSB Controller\n");
947
948         spin_lock_irqsave(&omap->lock, flags);
949
950         if (omap->count == 0)
951                 goto end_disble;
952
953         omap->count--;
954
955         if (omap->count != 0)
956                 goto end_disble;
957
958         /* Reset OMAP modules for insmod/rmmod to work */
959         usbhs_write(omap->uhh_base, OMAP_UHH_SYSCONFIG,
960                         is_omap_usbhs_rev2(omap) ?
961                         OMAP4_UHH_SYSCONFIG_SOFTRESET :
962                         OMAP_UHH_SYSCONFIG_SOFTRESET);
963
964         timeout = jiffies + msecs_to_jiffies(100);
965         while (!(usbhs_read(omap->uhh_base, OMAP_UHH_SYSSTATUS)
966                                 & (1 << 0))) {
967                 cpu_relax();
968
969                 if (time_after(jiffies, timeout))
970                         dev_dbg(dev, "operation timed out\n");
971         }
972
973         while (!(usbhs_read(omap->uhh_base, OMAP_UHH_SYSSTATUS)
974                                 & (1 << 1))) {
975                 cpu_relax();
976
977                 if (time_after(jiffies, timeout))
978                         dev_dbg(dev, "operation timed out\n");
979         }
980
981         while (!(usbhs_read(omap->uhh_base, OMAP_UHH_SYSSTATUS)
982                                 & (1 << 2))) {
983                 cpu_relax();
984
985                 if (time_after(jiffies, timeout))
986                         dev_dbg(dev, "operation timed out\n");
987         }
988
989         usbhs_write(omap->tll_base, OMAP_USBTLL_SYSCONFIG, (1 << 1));
990
991         while (!(usbhs_read(omap->tll_base, OMAP_USBTLL_SYSSTATUS)
992                                 & (1 << 0))) {
993                 cpu_relax();
994
995                 if (time_after(jiffies, timeout))
996                         dev_dbg(dev, "operation timed out\n");
997         }
998
999         if (is_omap_usbhs_rev2(omap)) {
1000                 if (is_ehci_tll_mode(pdata->port_mode[0]))
1001                         clk_disable(omap->usbtll_p1_fck);
1002                 if (is_ehci_tll_mode(pdata->port_mode[1]))
1003                         clk_disable(omap->usbtll_p2_fck);
1004                 clk_disable(omap->utmi_p2_fck);
1005                 clk_disable(omap->utmi_p1_fck);
1006         }
1007
1008         clk_disable(omap->usbtll_ick);
1009         clk_disable(omap->usbtll_fck);
1010         clk_disable(omap->usbhost_fs_fck);
1011         clk_disable(omap->usbhost_hs_fck);
1012         clk_disable(omap->usbhost_ick);
1013
1014         /* The gpio_free migh sleep; so unlock the spinlock */
1015         spin_unlock_irqrestore(&omap->lock, flags);
1016
1017         if (pdata->ehci_data->phy_reset) {
1018                 if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0]))
1019                         gpio_free(pdata->ehci_data->reset_gpio_port[0]);
1020
1021                 if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1]))
1022                         gpio_free(pdata->ehci_data->reset_gpio_port[1]);
1023         }
1024         return;
1025
1026 end_disble:
1027         spin_unlock_irqrestore(&omap->lock, flags);
1028 }
1029
1030 int omap_usbhs_enable(struct device *dev)
1031 {
1032         return  usbhs_enable(dev->parent);
1033 }
1034 EXPORT_SYMBOL_GPL(omap_usbhs_enable);
1035
1036 void omap_usbhs_disable(struct device *dev)
1037 {
1038         usbhs_disable(dev->parent);
1039 }
1040 EXPORT_SYMBOL_GPL(omap_usbhs_disable);
1041
1042 static struct platform_driver usbhs_omap_driver = {
1043         .driver = {
1044                 .name           = (char *)usbhs_driver_name,
1045                 .owner          = THIS_MODULE,
1046         },
1047         .remove         = __exit_p(usbhs_omap_remove),
1048 };
1049
1050 MODULE_AUTHOR("Keshava Munegowda <keshava_mgowda@ti.com>");
1051 MODULE_ALIAS("platform:" USBHS_DRIVER_NAME);
1052 MODULE_LICENSE("GPL v2");
1053 MODULE_DESCRIPTION("usb host common core driver for omap EHCI and OHCI");
1054
1055 static int __init omap_usbhs_drvinit(void)
1056 {
1057         return platform_driver_probe(&usbhs_omap_driver, usbhs_omap_probe);
1058 }
1059
1060 /*
1061  * init before ehci and ohci drivers;
1062  * The usbhs core driver should be initialized much before
1063  * the omap ehci and ohci probe functions are called.
1064  */
1065 fs_initcall(omap_usbhs_drvinit);
1066
1067 static void __exit omap_usbhs_drvexit(void)
1068 {
1069         platform_driver_unregister(&usbhs_omap_driver);
1070 }
1071 module_exit(omap_usbhs_drvexit);