Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab...
[pandora-kernel.git] / drivers / media / video / cafe_ccic-regs.h
1 /*
2  * Register definitions for the m88alp01 camera interface.  Offsets in bytes
3  * as given in the spec.
4  *
5  * Copyright 2006 One Laptop Per Child Association, Inc.
6  *
7  * Written by Jonathan Corbet, corbet@lwn.net.
8  *
9  * This file may be distributed under the terms of the GNU General
10  * Public License, version 2.
11  */
12 #define REG_Y0BAR       0x00
13 #define REG_Y1BAR       0x04
14 #define REG_Y2BAR       0x08
15 /* ... */
16
17 #define REG_IMGPITCH    0x24    /* Image pitch register */
18 #define   IMGP_YP_SHFT    2             /* Y pitch params */
19 #define   IMGP_YP_MASK    0x00003ffc    /* Y pitch field */
20 #define   IMGP_UVP_SHFT   18            /* UV pitch (planar) */
21 #define   IMGP_UVP_MASK   0x3ffc0000
22 #define REG_IRQSTATRAW  0x28    /* RAW IRQ Status */
23 #define   IRQ_EOF0        0x00000001    /* End of frame 0 */
24 #define   IRQ_EOF1        0x00000002    /* End of frame 1 */
25 #define   IRQ_EOF2        0x00000004    /* End of frame 2 */
26 #define   IRQ_SOF0        0x00000008    /* Start of frame 0 */
27 #define   IRQ_SOF1        0x00000010    /* Start of frame 1 */
28 #define   IRQ_SOF2        0x00000020    /* Start of frame 2 */
29 #define   IRQ_OVERFLOW    0x00000040    /* FIFO overflow */
30 #define   IRQ_TWSIW       0x00010000    /* TWSI (smbus) write */
31 #define   IRQ_TWSIR       0x00020000    /* TWSI read */
32 #define   IRQ_TWSIE       0x00040000    /* TWSI error */
33 #define   TWSIIRQS (IRQ_TWSIW|IRQ_TWSIR|IRQ_TWSIE)
34 #define   FRAMEIRQS (IRQ_EOF0|IRQ_EOF1|IRQ_EOF2|IRQ_SOF0|IRQ_SOF1|IRQ_SOF2)
35 #define   ALLIRQS (TWSIIRQS|FRAMEIRQS|IRQ_OVERFLOW)
36 #define REG_IRQMASK     0x2c    /* IRQ mask - same bits as IRQSTAT */
37 #define REG_IRQSTAT     0x30    /* IRQ status / clear */
38
39 #define REG_IMGSIZE     0x34    /* Image size */
40 #define  IMGSZ_V_MASK     0x1fff0000
41 #define  IMGSZ_V_SHIFT    16
42 #define  IMGSZ_H_MASK     0x00003fff
43 #define REG_IMGOFFSET   0x38    /* IMage offset */
44
45 #define REG_CTRL0       0x3c    /* Control 0 */
46 #define   C0_ENABLE       0x00000001    /* Makes the whole thing go */
47
48 /* Mask for all the format bits */
49 #define   C0_DF_MASK      0x00fffffc    /* Bits 2-23 */
50
51 /* RGB ordering */
52 #define   C0_RGB4_RGBX    0x00000000
53 #define   C0_RGB4_XRGB    0x00000004
54 #define   C0_RGB4_BGRX    0x00000008
55 #define   C0_RGB4_XBGR    0x0000000c
56 #define   C0_RGB5_RGGB    0x00000000
57 #define   C0_RGB5_GRBG    0x00000004
58 #define   C0_RGB5_GBRG    0x00000008
59 #define   C0_RGB5_BGGR    0x0000000c
60
61 /* Spec has two fields for DIN and DOUT, but they must match, so
62    combine them here. */
63 #define   C0_DF_YUV       0x00000000    /* Data is YUV      */
64 #define   C0_DF_RGB       0x000000a0    /* ... RGB                  */
65 #define   C0_DF_BAYER     0x00000140    /* ... Bayer                */
66 /* 8-8-8 must be missing from the below - ask */
67 #define   C0_RGBF_565     0x00000000
68 #define   C0_RGBF_444     0x00000800
69 #define   C0_RGB_BGR      0x00001000    /* Blue comes first */
70 #define   C0_YUV_PLANAR   0x00000000    /* YUV 422 planar format */
71 #define   C0_YUV_PACKED   0x00008000    /* YUV 422 packed       */
72 #define   C0_YUV_420PL    0x0000a000    /* YUV 420 planar       */
73 /* Think that 420 packed must be 111 - ask */
74 #define   C0_YUVE_YUYV    0x00000000    /* Y1CbY0Cr             */
75 #define   C0_YUVE_YVYU    0x00010000    /* Y1CrY0Cb             */
76 #define   C0_YUVE_VYUY    0x00020000    /* CrY1CbY0             */
77 #define   C0_YUVE_UYVY    0x00030000    /* CbY1CrY0             */
78 #define   C0_YUVE_XYUV    0x00000000    /* 420: .YUV            */
79 #define   C0_YUVE_XYVU    0x00010000    /* 420: .YVU            */
80 #define   C0_YUVE_XUVY    0x00020000    /* 420: .UVY            */
81 #define   C0_YUVE_XVUY    0x00030000    /* 420: .VUY            */
82 /* Bayer bits 18,19 if needed */
83 #define   C0_HPOL_LOW     0x01000000    /* HSYNC polarity active low */
84 #define   C0_VPOL_LOW     0x02000000    /* VSYNC polarity active low */
85 #define   C0_VCLK_LOW     0x04000000    /* VCLK on falling edge */
86 #define   C0_DOWNSCALE    0x08000000    /* Enable downscaler */
87 #define   C0_SIFM_MASK    0xc0000000    /* SIF mode bits */
88 #define   C0_SIF_HVSYNC   0x00000000    /* Use H/VSYNC */
89 #define   CO_SOF_NOSYNC   0x40000000    /* Use inband active signaling */
90
91
92 #define REG_CTRL1       0x40    /* Control 1 */
93 #define   C1_444ALPHA     0x00f00000    /* Alpha field in RGB444 */
94 #define   C1_ALPHA_SHFT   20
95 #define   C1_DMAB32       0x00000000    /* 32-byte DMA burst */
96 #define   C1_DMAB16       0x02000000    /* 16-byte DMA burst */
97 #define   C1_DMAB64       0x04000000    /* 64-byte DMA burst */
98 #define   C1_DMAB_MASK    0x06000000
99 #define   C1_TWOBUFS      0x08000000    /* Use only two DMA buffers */
100 #define   C1_PWRDWN       0x10000000    /* Power down */
101
102 #define REG_CLKCTRL     0x88    /* Clock control */
103 #define   CLK_DIV_MASK    0x0000ffff    /* Upper bits RW "reserved" */
104
105 #define REG_GPR         0xb4    /* General purpose register.  This
106                                    controls inputs to the power and reset
107                                    pins on the OV7670 used with OLPC;
108                                    other deployments could differ.  */
109 #define   GPR_C1EN        0x00000020    /* Pad 1 (power down) enable */
110 #define   GPR_C0EN        0x00000010    /* Pad 0 (reset) enable */
111 #define   GPR_C1          0x00000002    /* Control 1 value */
112 /*
113  * Control 0 is wired to reset on OLPC machines.  For ov7x sensors,
114  * it is active low, for 0v6x, instead, it's active high.  What
115  * fun.
116  */
117 #define   GPR_C0          0x00000001    /* Control 0 value */
118
119 #define REG_TWSIC0      0xb8    /* TWSI (smbus) control 0 */
120 #define   TWSIC0_EN       0x00000001    /* TWSI enable */
121 #define   TWSIC0_MODE     0x00000002    /* 1 = 16-bit, 0 = 8-bit */
122 #define   TWSIC0_SID      0x000003fc    /* Slave ID */
123 #define   TWSIC0_SID_SHIFT 2
124 #define   TWSIC0_CLKDIV   0x0007fc00    /* Clock divider */
125 #define   TWSIC0_MASKACK  0x00400000    /* Mask ack from sensor */
126 #define   TWSIC0_OVMAGIC  0x00800000    /* Make it work on OV sensors */
127
128 #define REG_TWSIC1      0xbc    /* TWSI control 1 */
129 #define   TWSIC1_DATA     0x0000ffff    /* Data to/from camchip */
130 #define   TWSIC1_ADDR     0x00ff0000    /* Address (register) */
131 #define   TWSIC1_ADDR_SHIFT 16
132 #define   TWSIC1_READ     0x01000000    /* Set for read op */
133 #define   TWSIC1_WSTAT    0x02000000    /* Write status */
134 #define   TWSIC1_RVALID   0x04000000    /* Read data valid */
135 #define   TWSIC1_ERROR    0x08000000    /* Something screwed up */
136
137
138 #define REG_UBAR        0xc4    /* Upper base address register */
139
140 /*
141  * Here's the weird global control registers which are said to live
142  * way up here.
143  */
144 #define REG_GL_CSR     0x3004  /* Control/status register */
145 #define   GCSR_SRS       0x00000001     /* SW Reset set */
146 #define   GCSR_SRC       0x00000002     /* SW Reset clear */
147 #define   GCSR_MRS       0x00000004     /* Master reset set */
148 #define   GCSR_MRC       0x00000008     /* HW Reset clear */
149 #define   GCSR_CCIC_EN   0x00004000    /* CCIC Clock enable */
150 #define REG_GL_IMASK   0x300c  /* Interrupt mask register */
151 #define   GIMSK_CCIC_EN          0x00000004    /* CCIC Interrupt enable */
152
153 #define REG_GL_FCR      0x3038  /* GPIO functional control register */
154 #define   GFCR_GPIO_ON    0x08          /* Camera GPIO enabled */
155 #define REG_GL_GPIOR    0x315c  /* GPIO register */
156 #define   GGPIO_OUT             0x80000 /* GPIO output */
157 #define   GGPIO_VAL             0x00008 /* Output pin value */
158
159 #define REG_LEN                REG_GL_IMASK + 4
160
161
162 /*
163  * Useful stuff that probably belongs somewhere global.
164  */
165 #define VGA_WIDTH       640
166 #define VGA_HEIGHT      480