drivers/media/video/c-qcam.c

   1 /*
   2  *      Video4Linux Colour QuickCam driver
   3  *      Copyright 1997-2000 Philip Blundell <philb@gnu.org>
   4  *
   5  *    Module parameters:
   6  *
   7  *      parport=auto      -- probe all parports (default)
   8  *      parport=0         -- parport0 becomes qcam1
   9  *      parport=2,0,1     -- parports 2,0,1 are tried in that order
  10  *
  11  *      probe=0           -- do no probing, assume camera is present
  12  *      probe=1           -- use IEEE-1284 autoprobe data only (default)
  13  *      probe=2           -- probe aggressively for cameras
  14  *
  15  *      force_rgb=1       -- force data format to RGB (default is BGR)
  16  *
  17  * The parport parameter controls which parports will be scanned.
  18  * Scanning all parports causes some printers to print a garbage page.
  19  *       -- March 14, 1999  Billy Donahue <billy@escape.com>
  20  *
  21  * Fixed data format to BGR, added force_rgb parameter. Added missing
  22  * parport_unregister_driver() on module removal.
  23  *       -- May 28, 2000  Claudio Matsuoka <claudio@conectiva.com>
  24  */
  25
  26 #include <linux/module.h>
  27 #include <linux/delay.h>
  28 #include <linux/errno.h>
  29 #include <linux/fs.h>
  30 #include <linux/init.h>
  31 #include <linux/kernel.h>
  32 #include <linux/slab.h>
  33 #include <linux/mm.h>
  34 #include <linux/parport.h>
  35 #include <linux/sched.h>
  36 #include <linux/mutex.h>
  37 #include <linux/jiffies.h>
  38 #include <linux/videodev2.h>
  39 #include <asm/uaccess.h>
  40 #include <media/v4l2-device.h>
  41 #include <media/v4l2-common.h>
  42 #include <media/v4l2-ioctl.h>
  43
  44 struct qcam {
  45         struct v4l2_device v4l2_dev;
  46         struct video_device vdev;
  47         struct pardevice *pdev;
  48         struct parport *pport;
  49         int width, height;
  50         int ccd_width, ccd_height;
  51         int mode;
  52         int contrast, brightness, whitebal;
  53         int top, left;
  54         unsigned int bidirectional;
  55         struct mutex lock;
  56 };
  57
  58 /* cameras maximum */
  59 #define MAX_CAMS 4
  60
  61 /* The three possible QuickCam modes */
  62 #define QC_MILLIONS     0x18
  63 #define QC_BILLIONS     0x10
  64 #define QC_THOUSANDS    0x08    /* with VIDEC compression (not supported) */
  65
  66 /* The three possible decimations */
  67 #define QC_DECIMATION_1         0
  68 #define QC_DECIMATION_2         2
  69 #define QC_DECIMATION_4         4
  70
  71 #define BANNER "Colour QuickCam for Video4Linux v0.06"
  72
  73 static int parport[MAX_CAMS] = { [1 ... MAX_CAMS-1] = -1 };
  74 static int probe = 2;
  75 static int force_rgb;
  76 static int video_nr = -1;
  77
  78 /* FIXME: parport=auto would never have worked, surely? --RR */
  79 MODULE_PARM_DESC(parport, "parport=<auto|n[,n]...> for port detection method\n"
  80                           "probe=<0|1|2> for camera detection method\n"
  81                           "force_rgb=<0|1> for RGB data format (default BGR)");
  82 module_param_array(parport, int, NULL, 0);
  83 module_param(probe, int, 0);
  84 module_param(force_rgb, bool, 0);
  85 module_param(video_nr, int, 0);
  86
  87 static struct qcam *qcams[MAX_CAMS];
  88 static unsigned int num_cams;
  89
  90 static inline void qcam_set_ack(struct qcam *qcam, unsigned int i)
  91 {
  92         /* note: the QC specs refer to the PCAck pin by voltage, not
  93            software level.  PC ports have builtin inverters. */
  94         parport_frob_control(qcam->pport, 8, i ? 8 : 0);
  95 }
  96
  97 static inline unsigned int qcam_ready1(struct qcam *qcam)
  98 {
  99         return (parport_read_status(qcam->pport) & 0x8) ? 1 : 0;
 100 }
 101
 102 static inline unsigned int qcam_ready2(struct qcam *qcam)
 103 {
 104         return (parport_read_data(qcam->pport) & 0x1) ? 1 : 0;
 105 }
 106
 107 static unsigned int qcam_await_ready1(struct qcam *qcam, int value)
 108 {
 109         struct v4l2_device *v4l2_dev = &qcam->v4l2_dev;
 110         unsigned long oldjiffies = jiffies;
 111         unsigned int i;
 112
 113         for (oldjiffies = jiffies;
 114              time_before(jiffies, oldjiffies + msecs_to_jiffies(40));)
 115                 if (qcam_ready1(qcam) == value)
 116                         return 0;
 117
 118         /* If the camera didn't respond within 1/25 second, poll slowly
 119            for a while. */
 120         for (i = 0; i < 50; i++) {
 121                 if (qcam_ready1(qcam) == value)
 122                         return 0;
 123                 msleep_interruptible(100);
 124         }
 125
 126         /* Probably somebody pulled the plug out.  Not much we can do. */
 127         v4l2_err(v4l2_dev, "ready1 timeout (%d) %x %x\n", value,
 128                parport_read_status(qcam->pport),
 129                parport_read_control(qcam->pport));
 130         return 1;
 131 }
 132
 133 static unsigned int qcam_await_ready2(struct qcam *qcam, int value)
 134 {
 135         struct v4l2_device *v4l2_dev = &qcam->v4l2_dev;
 136         unsigned long oldjiffies = jiffies;
 137         unsigned int i;
 138
 139         for (oldjiffies = jiffies;
 140              time_before(jiffies, oldjiffies + msecs_to_jiffies(40));)
 141                 if (qcam_ready2(qcam) == value)
 142                         return 0;
 143
 144         /* If the camera didn't respond within 1/25 second, poll slowly
 145            for a while. */
 146         for (i = 0; i < 50; i++) {
 147                 if (qcam_ready2(qcam) == value)
 148                         return 0;
 149                 msleep_interruptible(100);
 150         }
 151
 152         /* Probably somebody pulled the plug out.  Not much we can do. */
 153         v4l2_err(v4l2_dev, "ready2 timeout (%d) %x %x %x\n", value,
 154                parport_read_status(qcam->pport),
 155                parport_read_control(qcam->pport),
 156                parport_read_data(qcam->pport));
 157         return 1;
 158 }
 159
 160 static int qcam_read_data(struct qcam *qcam)
 161 {
 162         unsigned int idata;
 163
 164         qcam_set_ack(qcam, 0);
 165         if (qcam_await_ready1(qcam, 1))
 166                 return -1;
 167         idata = parport_read_status(qcam->pport) & 0xf0;
 168         qcam_set_ack(qcam, 1);
 169         if (qcam_await_ready1(qcam, 0))
 170                 return -1;
 171         idata |= parport_read_status(qcam->pport) >> 4;
 172         return idata;
 173 }
 174
 175 static int qcam_write_data(struct qcam *qcam, unsigned int data)
 176 {
 177         struct v4l2_device *v4l2_dev = &qcam->v4l2_dev;
 178         unsigned int idata;
 179
 180         parport_write_data(qcam->pport, data);
 181         idata = qcam_read_data(qcam);
 182         if (data != idata) {
 183                 v4l2_warn(v4l2_dev, "sent %x but received %x\n", data,
 184                        idata);
 185                 return 1;
 186         }
 187         return 0;
 188 }
 189
 190 static inline int qcam_set(struct qcam *qcam, unsigned int cmd, unsigned int data)
 191 {
 192         if (qcam_write_data(qcam, cmd))
 193                 return -1;
 194         if (qcam_write_data(qcam, data))
 195                 return -1;
 196         return 0;
 197 }
 198
 199 static inline int qcam_get(struct qcam *qcam, unsigned int cmd)
 200 {
 201         if (qcam_write_data(qcam, cmd))
 202                 return -1;
 203         return qcam_read_data(qcam);
 204 }
 205
 206 static int qc_detect(struct qcam *qcam)
 207 {
 208         unsigned int stat, ostat, i, count = 0;
 209
 210         /* The probe routine below is not very reliable.  The IEEE-1284
 211            probe takes precedence. */
 212         /* XXX Currently parport provides no way to distinguish between
 213            "the IEEE probe was not done" and "the probe was done, but
 214            no device was found".  Fix this one day. */
 215         if (qcam->pport->probe_info[0].class == PARPORT_CLASS_MEDIA
 216             && qcam->pport->probe_info[0].model
 217             && !strcmp(qcam->pdev->port->probe_info[0].model,
 218                        "Color QuickCam 2.0")) {
 219                 printk(KERN_DEBUG "QuickCam: Found by IEEE1284 probe.\n");
 220                 return 1;
 221         }
 222
 223         if (probe < 2)
 224                 return 0;
 225
 226         parport_write_control(qcam->pport, 0xc);
 227
 228         /* look for a heartbeat */
 229         ostat = stat = parport_read_status(qcam->pport);
 230         for (i = 0; i < 250; i++) {
 231                 mdelay(1);
 232                 stat = parport_read_status(qcam->pport);
 233                 if (ostat != stat) {
 234                         if (++count >= 3)
 235                                 return 1;
 236                         ostat = stat;
 237                 }
 238         }
 239
 240         /* Reset the camera and try again */
 241         parport_write_control(qcam->pport, 0xc);
 242         parport_write_control(qcam->pport, 0x8);
 243         mdelay(1);
 244         parport_write_control(qcam->pport, 0xc);
 245         mdelay(1);
 246         count = 0;
 247
 248         ostat = stat = parport_read_status(qcam->pport);
 249         for (i = 0; i < 250; i++) {
 250                 mdelay(1);
 251                 stat = parport_read_status(qcam->pport);
 252                 if (ostat != stat) {
 253                         if (++count >= 3)
 254                                 return 1;
 255                         ostat = stat;
 256                 }
 257         }
 258
 259         /* no (or flatline) camera, give up */
 260         return 0;
 261 }
 262
 263 static void qc_reset(struct qcam *qcam)
 264 {
 265         parport_write_control(qcam->pport, 0xc);
 266         parport_write_control(qcam->pport, 0x8);
 267         mdelay(1);
 268         parport_write_control(qcam->pport, 0xc);
 269         mdelay(1);
 270 }
 271
 272 /* Reset the QuickCam and program for brightness, contrast,
 273  * white-balance, and resolution. */
 274
 275 static void qc_setup(struct qcam *qcam)
 276 {
 277         qc_reset(qcam);
 278
 279         /* Set the brightness. */
 280         qcam_set(qcam, 11, qcam->brightness);
 281
 282         /* Set the height and width.  These refer to the actual
 283            CCD area *before* applying the selected decimation.  */
 284         qcam_set(qcam, 17, qcam->ccd_height);
 285         qcam_set(qcam, 19, qcam->ccd_width / 2);
 286
 287         /* Set top and left.  */
 288         qcam_set(qcam, 0xd, qcam->top);
 289         qcam_set(qcam, 0xf, qcam->left);
 290
 291         /* Set contrast and white balance.  */
 292         qcam_set(qcam, 0x19, qcam->contrast);
 293         qcam_set(qcam, 0x1f, qcam->whitebal);
 294
 295         /* Set the speed.  */
 296         qcam_set(qcam, 45, 2);
 297 }
 298
 299 /* Read some bytes from the camera and put them in the buffer.
 300    nbytes should be a multiple of 3, because bidirectional mode gives
 301    us three bytes at a time.  */
 302
 303 static unsigned int qcam_read_bytes(struct qcam *qcam, unsigned char *buf, unsigned int nbytes)
 304 {
 305         unsigned int bytes = 0;
 306
 307         qcam_set_ack(qcam, 0);
 308         if (qcam->bidirectional) {
 309                 /* It's a bidirectional port */
 310                 while (bytes < nbytes) {
 311                         unsigned int lo1, hi1, lo2, hi2;
 312                         unsigned char r, g, b;
 313
 314                         if (qcam_await_ready2(qcam, 1))
 315                                 return bytes;
 316                         lo1 = parport_read_data(qcam->pport) >> 1;
 317                         hi1 = ((parport_read_status(qcam->pport) >> 3) & 0x1f) ^ 0x10;
 318                         qcam_set_ack(qcam, 1);
 319                         if (qcam_await_ready2(qcam, 0))
 320                                 return bytes;
 321                         lo2 = parport_read_data(qcam->pport) >> 1;
 322                         hi2 = ((parport_read_status(qcam->pport) >> 3) & 0x1f) ^ 0x10;
 323                         qcam_set_ack(qcam, 0);
 324                         r = lo1 | ((hi1 & 1) << 7);
 325                         g = ((hi1 & 0x1e) << 3) | ((hi2 & 0x1e) >> 1);
 326                         b = lo2 | ((hi2 & 1) << 7);
 327                         if (force_rgb) {
 328                                 buf[bytes++] = r;
 329                                 buf[bytes++] = g;
 330                                 buf[bytes++] = b;
 331                         } else {
 332                                 buf[bytes++] = b;
 333                                 buf[bytes++] = g;
 334                                 buf[bytes++] = r;
 335                         }
 336                 }
 337         } else {
 338                 /* It's a unidirectional port */
 339                 int i = 0, n = bytes;
 340                 unsigned char rgb[3];
 341
 342                 while (bytes < nbytes) {
 343                         unsigned int hi, lo;
 344
 345                         if (qcam_await_ready1(qcam, 1))
 346                                 return bytes;
 347                         hi = (parport_read_status(qcam->pport) & 0xf0);
 348                         qcam_set_ack(qcam, 1);
 349                         if (qcam_await_ready1(qcam, 0))
 350                                 return bytes;
 351                         lo = (parport_read_status(qcam->pport) & 0xf0);
 352                         qcam_set_ack(qcam, 0);
 353                         /* flip some bits */
 354                         rgb[(i = bytes++ % 3)] = (hi | (lo >> 4)) ^ 0x88;
 355                         if (i >= 2) {
 356 get_fragment:
 357                                 if (force_rgb) {
 358                                         buf[n++] = rgb[0];
 359                                         buf[n++] = rgb[1];
 360                                         buf[n++] = rgb[2];
 361                                 } else {
 362                                         buf[n++] = rgb[2];
 363                                         buf[n++] = rgb[1];
 364                                         buf[n++] = rgb[0];
 365                                 }
 366                         }
 367                 }
 368                 if (i) {
 369                         i = 0;
 370                         goto get_fragment;
 371                 }
 372         }
 373         return bytes;
 374 }
 375
 376 #define BUFSZ   150
 377
 378 static long qc_capture(struct qcam *qcam, char __user *buf, unsigned long len)
 379 {
 380         struct v4l2_device *v4l2_dev = &qcam->v4l2_dev;
 381         unsigned lines, pixelsperline, bitsperxfer;
 382         unsigned int is_bi_dir = qcam->bidirectional;
 383         size_t wantlen, outptr = 0;
 384         char tmpbuf[BUFSZ];
 385
 386         if (!access_ok(VERIFY_WRITE, buf, len))
 387                 return -EFAULT;
 388
 389         /* Wait for camera to become ready */
 390         for (;;) {
 391                 int i = qcam_get(qcam, 41);
 392
 393                 if (i == -1) {
 394                         qc_setup(qcam);
 395                         return -EIO;
 396                 }
 397                 if ((i & 0x80) == 0)
 398                         break;
 399                 schedule();
 400         }
 401
 402         if (qcam_set(qcam, 7, (qcam->mode | (is_bi_dir ? 1 : 0)) + 1))
 403                 return -EIO;
 404
 405         lines = qcam->height;
 406         pixelsperline = qcam->width;
 407         bitsperxfer = (is_bi_dir) ? 24 : 8;
 408
 409         if (is_bi_dir) {
 410                 /* Turn the port around */
 411                 parport_data_reverse(qcam->pport);
 412                 mdelay(3);
 413                 qcam_set_ack(qcam, 0);
 414                 if (qcam_await_ready1(qcam, 1)) {
 415                         qc_setup(qcam);
 416                         return -EIO;
 417                 }
 418                 qcam_set_ack(qcam, 1);
 419                 if (qcam_await_ready1(qcam, 0)) {
 420                         qc_setup(qcam);
 421                         return -EIO;
 422                 }
 423         }
 424
 425         wantlen = lines * pixelsperline * 24 / 8;
 426
 427         while (wantlen) {
 428                 size_t t, s;
 429
 430                 s = (wantlen > BUFSZ) ? BUFSZ : wantlen;
 431                 t = qcam_read_bytes(qcam, tmpbuf, s);
 432                 if (outptr < len) {
 433                         size_t sz = len - outptr;
 434
 435                         if (sz > t)
 436                                 sz = t;
 437                         if (__copy_to_user(buf + outptr, tmpbuf, sz))
 438                                 break;
 439                         outptr += sz;
 440                 }
 441                 wantlen -= t;
 442                 if (t < s)
 443                         break;
 444                 cond_resched();
 445         }
 446
 447         len = outptr;
 448
 449         if (wantlen) {
 450                 v4l2_err(v4l2_dev, "short read.\n");
 451                 if (is_bi_dir)
 452                         parport_data_forward(qcam->pport);
 453                 qc_setup(qcam);
 454                 return len;
 455         }
 456
 457         if (is_bi_dir) {
 458                 int l;
 459
 460                 do {
 461                         l = qcam_read_bytes(qcam, tmpbuf, 3);
 462                         cond_resched();
 463                 } while (l && (tmpbuf[0] == 0x7e || tmpbuf[1] == 0x7e || tmpbuf[2] == 0x7e));
 464                 if (force_rgb) {
 465                         if (tmpbuf[0] != 0xe || tmpbuf[1] != 0x0 || tmpbuf[2] != 0xf)
 466                                 v4l2_err(v4l2_dev, "bad EOF\n");
 467                 } else {
 468                         if (tmpbuf[0] != 0xf || tmpbuf[1] != 0x0 || tmpbuf[2] != 0xe)
 469                                 v4l2_err(v4l2_dev, "bad EOF\n");
 470                 }
 471                 qcam_set_ack(qcam, 0);
 472                 if (qcam_await_ready1(qcam, 1)) {
 473                         v4l2_err(v4l2_dev, "no ack after EOF\n");
 474                         parport_data_forward(qcam->pport);
 475                         qc_setup(qcam);
 476                         return len;
 477                 }
 478                 parport_data_forward(qcam->pport);
 479                 mdelay(3);
 480                 qcam_set_ack(qcam, 1);
 481                 if (qcam_await_ready1(qcam, 0)) {
 482                         v4l2_err(v4l2_dev, "no ack to port turnaround\n");
 483                         qc_setup(qcam);
 484                         return len;
 485                 }
 486         } else {
 487                 int l;
 488
 489                 do {
 490                         l = qcam_read_bytes(qcam, tmpbuf, 1);
 491                         cond_resched();
 492                 } while (l && tmpbuf[0] == 0x7e);
 493                 l = qcam_read_bytes(qcam, tmpbuf + 1, 2);
 494                 if (force_rgb) {
 495                         if (tmpbuf[0] != 0xe || tmpbuf[1] != 0x0 || tmpbuf[2] != 0xf)
 496                                 v4l2_err(v4l2_dev, "bad EOF\n");
 497                 } else {
 498                         if (tmpbuf[0] != 0xf || tmpbuf[1] != 0x0 || tmpbuf[2] != 0xe)
 499                                 v4l2_err(v4l2_dev, "bad EOF\n");
 500                 }
 501         }
 502
 503         qcam_write_data(qcam, 0);
 504         return len;
 505 }
 506
 507 /*
 508  *      Video4linux interfacing
 509  */
 510
 511 static int qcam_querycap(struct file *file, void  *priv,
 512                                         struct v4l2_capability *vcap)
 513 {
 514         struct qcam *qcam = video_drvdata(file);
 515
 516         strlcpy(vcap->driver, qcam->v4l2_dev.name, sizeof(vcap->driver));
 517         strlcpy(vcap->card, "Color Quickcam", sizeof(vcap->card));
 518         strlcpy(vcap->bus_info, "parport", sizeof(vcap->bus_info));
 519         vcap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE;
 520         return 0;
 521 }
 522
 523 static int qcam_enum_input(struct file *file, void *fh, struct v4l2_input *vin)
 524 {
 525         if (vin->index > 0)
 526                 return -EINVAL;
 527         strlcpy(vin->name, "Camera", sizeof(vin->name));
 528         vin->type = V4L2_INPUT_TYPE_CAMERA;
 529         vin->audioset = 0;
 530         vin->tuner = 0;
 531         vin->std = 0;
 532         vin->status = 0;
 533         return 0;
 534 }
 535
 536 static int qcam_g_input(struct file *file, void *fh, unsigned int *inp)
 537 {
 538         *inp = 0;
 539         return 0;
 540 }
 541
 542 static int qcam_s_input(struct file *file, void *fh, unsigned int inp)
 543 {
 544         return (inp > 0) ? -EINVAL : 0;
 545 }
 546
 547 static int qcam_queryctrl(struct file *file, void *priv,
 548                                         struct v4l2_queryctrl *qc)
 549 {
 550         switch (qc->id) {
 551         case V4L2_CID_BRIGHTNESS:
 552                 return v4l2_ctrl_query_fill(qc, 0, 255, 1, 240);
 553         case V4L2_CID_CONTRAST:
 554                 return v4l2_ctrl_query_fill(qc, 0, 255, 1, 192);
 555         case V4L2_CID_GAMMA:
 556                 return v4l2_ctrl_query_fill(qc, 0, 255, 1, 128);
 557         }
 558         return -EINVAL;
 559 }
 560
 561 static int qcam_g_ctrl(struct file *file, void *priv,
 562                                         struct v4l2_control *ctrl)
 563 {
 564         struct qcam *qcam = video_drvdata(file);
 565         int ret = 0;
 566
 567         switch (ctrl->id) {
 568         case V4L2_CID_BRIGHTNESS:
 569                 ctrl->value = qcam->brightness;
 570                 break;
 571         case V4L2_CID_CONTRAST:
 572                 ctrl->value = qcam->contrast;
 573                 break;
 574         case V4L2_CID_GAMMA:
 575                 ctrl->value = qcam->whitebal;
 576                 break;
 577         default:
 578                 ret = -EINVAL;
 579                 break;
 580         }
 581         return ret;
 582 }
 583
 584 static int qcam_s_ctrl(struct file *file, void *priv,
 585                                         struct v4l2_control *ctrl)
 586 {
 587         struct qcam *qcam = video_drvdata(file);
 588         int ret = 0;
 589
 590         mutex_lock(&qcam->lock);
 591         switch (ctrl->id) {
 592         case V4L2_CID_BRIGHTNESS:
 593                 qcam->brightness = ctrl->value;
 594                 break;
 595         case V4L2_CID_CONTRAST:
 596                 qcam->contrast = ctrl->value;
 597                 break;
 598         case V4L2_CID_GAMMA:
 599                 qcam->whitebal = ctrl->value;
 600                 break;
 601         default:
 602                 ret = -EINVAL;
 603                 break;
 604         }
 605         if (ret == 0) {
 606                 parport_claim_or_block(qcam->pdev);
 607                 qc_setup(qcam);
 608                 parport_release(qcam->pdev);
 609         }
 610         mutex_unlock(&qcam->lock);
 611         return ret;
 612 }
 613
 614 static int qcam_g_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt)
 615 {
 616         struct qcam *qcam = video_drvdata(file);
 617         struct v4l2_pix_format *pix = &fmt->fmt.pix;
 618
 619         pix->width = qcam->width;
 620         pix->height = qcam->height;
 621         pix->pixelformat = V4L2_PIX_FMT_RGB24;
 622         pix->field = V4L2_FIELD_NONE;
 623         pix->bytesperline = 3 * qcam->width;
 624         pix->sizeimage = 3 * qcam->width * qcam->height;
 625         /* Just a guess */
 626         pix->colorspace = V4L2_COLORSPACE_SRGB;
 627         return 0;
 628 }
 629
 630 static int qcam_try_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt)
 631 {
 632         struct v4l2_pix_format *pix = &fmt->fmt.pix;
 633
 634         if (pix->height < 60 || pix->width < 80) {
 635                 pix->height = 60;
 636                 pix->width = 80;
 637         } else if (pix->height < 120 || pix->width < 160) {
 638                 pix->height = 120;
 639                 pix->width = 160;
 640         } else {
 641                 pix->height = 240;
 642                 pix->width = 320;
 643         }
 644         pix->pixelformat = V4L2_PIX_FMT_RGB24;
 645         pix->field = V4L2_FIELD_NONE;
 646         pix->bytesperline = 3 * pix->width;
 647         pix->sizeimage = 3 * pix->width * pix->height;
 648         /* Just a guess */
 649         pix->colorspace = V4L2_COLORSPACE_SRGB;
 650         return 0;
 651 }
 652
 653 static int qcam_s_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt)
 654 {
 655         struct qcam *qcam = video_drvdata(file);
 656         struct v4l2_pix_format *pix = &fmt->fmt.pix;
 657         int ret = qcam_try_fmt_vid_cap(file, fh, fmt);
 658
 659         if (ret)
 660                 return ret;
 661         switch (pix->height) {
 662         case 60:
 663                 qcam->mode = QC_DECIMATION_4;
 664                 break;
 665         case 120:
 666                 qcam->mode = QC_DECIMATION_2;
 667                 break;
 668         default:
 669                 qcam->mode = QC_DECIMATION_1;
 670                 break;
 671         }
 672
 673         mutex_lock(&qcam->lock);
 674         qcam->mode |= QC_MILLIONS;
 675         qcam->height = pix->height;
 676         qcam->width = pix->width;
 677         parport_claim_or_block(qcam->pdev);
 678         qc_setup(qcam);
 679         parport_release(qcam->pdev);
 680         mutex_unlock(&qcam->lock);
 681         return 0;
 682 }
 683
 684 static int qcam_enum_fmt_vid_cap(struct file *file, void *fh, struct v4l2_fmtdesc *fmt)
 685 {
 686         static struct v4l2_fmtdesc formats[] = {
 687                 { 0, 0, 0,
 688                   "RGB 8:8:8", V4L2_PIX_FMT_RGB24,
 689                   { 0, 0, 0, 0 }
 690                 },
 691         };
 692         enum v4l2_buf_type type = fmt->type;
 693
 694         if (fmt->index > 0)
 695                 return -EINVAL;
 696
 697         *fmt = formats[fmt->index];
 698         fmt->type = type;
 699         return 0;
 700 }
 701
 702 static ssize_t qcam_read(struct file *file, char __user *buf,
 703                          size_t count, loff_t *ppos)
 704 {
 705         struct qcam *qcam = video_drvdata(file);
 706         int len;
 707
 708         mutex_lock(&qcam->lock);
 709         parport_claim_or_block(qcam->pdev);
 710         /* Probably should have a semaphore against multiple users */
 711         len = qc_capture(qcam, buf, count);
 712         parport_release(qcam->pdev);
 713         mutex_unlock(&qcam->lock);
 714         return len;
 715 }
 716
 717 static const struct v4l2_file_operations qcam_fops = {
 718         .owner          = THIS_MODULE,
 719         .unlocked_ioctl = video_ioctl2,
 720         .read           = qcam_read,
 721 };
 722
 723 static const struct v4l2_ioctl_ops qcam_ioctl_ops = {
 724         .vidioc_querycap                    = qcam_querycap,
 725         .vidioc_g_input                     = qcam_g_input,
 726         .vidioc_s_input                     = qcam_s_input,
 727         .vidioc_enum_input                  = qcam_enum_input,
 728         .vidioc_queryctrl                   = qcam_queryctrl,
 729         .vidioc_g_ctrl                      = qcam_g_ctrl,
 730         .vidioc_s_ctrl                      = qcam_s_ctrl,
 731         .vidioc_enum_fmt_vid_cap            = qcam_enum_fmt_vid_cap,
 732         .vidioc_g_fmt_vid_cap               = qcam_g_fmt_vid_cap,
 733         .vidioc_s_fmt_vid_cap               = qcam_s_fmt_vid_cap,
 734         .vidioc_try_fmt_vid_cap             = qcam_try_fmt_vid_cap,
 735 };
 736
 737 /* Initialize the QuickCam driver control structure. */
 738
 739 static struct qcam *qcam_init(struct parport *port)
 740 {
 741         struct qcam *qcam;
 742         struct v4l2_device *v4l2_dev;
 743
 744         qcam = kzalloc(sizeof(*qcam), GFP_KERNEL);
 745         if (qcam == NULL)
 746                 return NULL;
 747
 748         v4l2_dev = &qcam->v4l2_dev;
 749         strlcpy(v4l2_dev->name, "c-qcam", sizeof(v4l2_dev->name));
 750
 751         if (v4l2_device_register(NULL, v4l2_dev) < 0) {
 752                 v4l2_err(v4l2_dev, "Could not register v4l2_device\n");
 753                 kfree(qcam);
 754                 return NULL;
 755         }
 756
 757         qcam->pport = port;
 758         qcam->pdev = parport_register_device(port, "c-qcam", NULL, NULL,
 759                                           NULL, 0, NULL);
 760
 761         qcam->bidirectional = (qcam->pport->modes & PARPORT_MODE_TRISTATE) ? 1 : 0;
 762
 763         if (qcam->pdev == NULL) {
 764                 v4l2_err(v4l2_dev, "couldn't register for %s.\n", port->name);
 765                 kfree(qcam);
 766                 return NULL;
 767         }
 768
 769         strlcpy(qcam->vdev.name, "Colour QuickCam", sizeof(qcam->vdev.name));
 770         qcam->vdev.v4l2_dev = v4l2_dev;
 771         qcam->vdev.fops = &qcam_fops;
 772         qcam->vdev.ioctl_ops = &qcam_ioctl_ops;
 773         qcam->vdev.release = video_device_release_empty;
 774         video_set_drvdata(&qcam->vdev, qcam);
 775
 776         mutex_init(&qcam->lock);
 777         qcam->width = qcam->ccd_width = 320;
 778         qcam->height = qcam->ccd_height = 240;
 779         qcam->mode = QC_MILLIONS | QC_DECIMATION_1;
 780         qcam->contrast = 192;
 781         qcam->brightness = 240;
 782         qcam->whitebal = 128;
 783         qcam->top = 1;
 784         qcam->left = 14;
 785         return qcam;
 786 }
 787
 788 static int init_cqcam(struct parport *port)
 789 {
 790         struct qcam *qcam;
 791         struct v4l2_device *v4l2_dev;
 792
 793         if (parport[0] != -1) {
 794                 /* The user gave specific instructions */
 795                 int i, found = 0;
 796
 797                 for (i = 0; i < MAX_CAMS && parport[i] != -1; i++) {
 798                         if (parport[0] == port->number)
 799                                 found = 1;
 800                 }
 801                 if (!found)
 802                         return -ENODEV;
 803         }
 804
 805         if (num_cams == MAX_CAMS)
 806                 return -ENOSPC;
 807
 808         qcam = qcam_init(port);
 809         if (qcam == NULL)
 810                 return -ENODEV;
 811
 812         v4l2_dev = &qcam->v4l2_dev;
 813
 814         parport_claim_or_block(qcam->pdev);
 815
 816         qc_reset(qcam);
 817
 818         if (probe && qc_detect(qcam) == 0) {
 819                 parport_release(qcam->pdev);
 820                 parport_unregister_device(qcam->pdev);
 821                 kfree(qcam);
 822                 return -ENODEV;
 823         }
 824
 825         qc_setup(qcam);
 826
 827         parport_release(qcam->pdev);
 828
 829         if (video_register_device(&qcam->vdev, VFL_TYPE_GRABBER, video_nr) < 0) {
 830                 v4l2_err(v4l2_dev, "Unable to register Colour QuickCam on %s\n",
 831                        qcam->pport->name);
 832                 parport_unregister_device(qcam->pdev);
 833                 kfree(qcam);
 834                 return -ENODEV;
 835         }
 836
 837         v4l2_info(v4l2_dev, "%s: Colour QuickCam found on %s\n",
 838                video_device_node_name(&qcam->vdev), qcam->pport->name);
 839
 840         qcams[num_cams++] = qcam;
 841
 842         return 0;
 843 }
 844
 845 static void close_cqcam(struct qcam *qcam)
 846 {
 847         video_unregister_device(&qcam->vdev);
 848         parport_unregister_device(qcam->pdev);
 849         kfree(qcam);
 850 }
 851
 852 static void cq_attach(struct parport *port)
 853 {
 854         init_cqcam(port);
 855 }
 856
 857 static void cq_detach(struct parport *port)
 858 {
 859         /* Write this some day. */
 860 }
 861
 862 static struct parport_driver cqcam_driver = {
 863         .name = "cqcam",
 864         .attach = cq_attach,
 865         .detach = cq_detach,
 866 };
 867
 868 static int __init cqcam_init(void)
 869 {
 870         printk(KERN_INFO BANNER "\n");
 871
 872         return parport_register_driver(&cqcam_driver);
 873 }
 874
 875 static void __exit cqcam_cleanup(void)
 876 {
 877         unsigned int i;
 878
 879         for (i = 0; i < num_cams; i++)
 880                 close_cqcam(qcams[i]);
 881
 882         parport_unregister_driver(&cqcam_driver);
 883 }
 884
 885 MODULE_AUTHOR("Philip Blundell <philb@gnu.org>");
 886 MODULE_DESCRIPTION(BANNER);
 887 MODULE_LICENSE("GPL");
 888 MODULE_VERSION("0.0.4");
 889
 890 module_init(cqcam_init);
 891 module_exit(cqcam_cleanup);