drivers/media/video/bt8xx/bttv-cards.c

   1 /*
   2
   3     bttv-cards.c
   4
   5     this file has configuration informations - card-specific stuff
   6     like the big tvcards array for the most part
   7
   8     Copyright (C) 1996,97,98 Ralph  Metzler (rjkm@thp.uni-koeln.de)
   9                            & Marcus Metzler (mocm@thp.uni-koeln.de)
  10     (c) 1999-2001 Gerd Knorr <kraxel@goldbach.in-berlin.de>
  11
  12     This program is free software; you can redistribute it and/or modify
  13     it under the terms of the GNU General Public License as published by
  14     the Free Software Foundation; either version 2 of the License, or
  15     (at your option) any later version.
  16
  17     This program is distributed in the hope that it will be useful,
  18     but WITHOUT ANY WARRANTY; without even the implied warranty of
  19     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  20     GNU General Public License for more details.
  21
  22     You should have received a copy of the GNU General Public License
  23     along with this program; if not, write to the Free Software
  24     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  25
  26 */
  27
  28 #include <linux/delay.h>
  29 #include <linux/module.h>
  30 #include <linux/kmod.h>
  31 #include <linux/init.h>
  32 #include <linux/pci.h>
  33 #include <linux/vmalloc.h>
  34 #include <linux/firmware.h>
  35 #include <net/checksum.h>
  36
  37 #include <asm/unaligned.h>
  38 #include <asm/io.h>
  39
  40 #include "bttvp.h"
  41 #include <media/v4l2-common.h>
  42 #include <media/tvaudio.h>
  43 #include "bttv-audio-hook.h"
  44
  45 /* fwd decl */
  46 static void boot_msp34xx(struct bttv *btv, int pin);
  47 static void hauppauge_eeprom(struct bttv *btv);
  48 static void avermedia_eeprom(struct bttv *btv);
  49 static void osprey_eeprom(struct bttv *btv, const u8 ee[256]);
  50 static void modtec_eeprom(struct bttv *btv);
  51 static void init_PXC200(struct bttv *btv);
  52 static void init_RTV24(struct bttv *btv);
  53
  54 static void rv605_muxsel(struct bttv *btv, unsigned int input);
  55 static void eagle_muxsel(struct bttv *btv, unsigned int input);
  56 static void xguard_muxsel(struct bttv *btv, unsigned int input);
  57 static void ivc120_muxsel(struct bttv *btv, unsigned int input);
  58 static void gvc1100_muxsel(struct bttv *btv, unsigned int input);
  59
  60 static void PXC200_muxsel(struct bttv *btv, unsigned int input);
  61
  62 static void picolo_tetra_muxsel(struct bttv *btv, unsigned int input);
  63 static void picolo_tetra_init(struct bttv *btv);
  64
  65 static void tibetCS16_muxsel(struct bttv *btv, unsigned int input);
  66 static void tibetCS16_init(struct bttv *btv);
  67
  68 static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input);
  69 static void kodicom4400r_init(struct bttv *btv);
  70
  71 static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input);
  72 static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input);
  73
  74 static void geovision_muxsel(struct bttv *btv, unsigned int input);
  75
  76 static void phytec_muxsel(struct bttv *btv, unsigned int input);
  77
  78 static void gv800s_muxsel(struct bttv *btv, unsigned int input);
  79 static void gv800s_init(struct bttv *btv);
  80
  81 static int terratec_active_radio_upgrade(struct bttv *btv);
  82 static int tea5757_read(struct bttv *btv);
  83 static int tea5757_write(struct bttv *btv, int value);
  84 static void identify_by_eeprom(struct bttv *btv,
  85                                unsigned char eeprom_data[256]);
  86 static int __devinit pvr_boot(struct bttv *btv);
  87
  88 /* config variables */
  89 static unsigned int triton1;
  90 static unsigned int vsfx;
  91 static unsigned int latency = UNSET;
  92 int no_overlay=-1;
  93
  94 static unsigned int card[BTTV_MAX]   = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
  95 static unsigned int pll[BTTV_MAX]    = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
  96 static unsigned int tuner[BTTV_MAX]  = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
  97 static unsigned int svhs[BTTV_MAX]   = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
  98 static unsigned int remote[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
  99 static unsigned int audiodev[BTTV_MAX];
 100 static unsigned int saa6588[BTTV_MAX];
 101 static struct bttv  *master[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = NULL };
 102 static unsigned int autoload = UNSET;
 103 static unsigned int gpiomask = UNSET;
 104 static unsigned int audioall = UNSET;
 105 static unsigned int audiomux[5] = { [ 0 ... 4 ] = UNSET };
 106
 107 /* insmod options */
 108 module_param(triton1,    int, 0444);
 109 module_param(vsfx,       int, 0444);
 110 module_param(no_overlay, int, 0444);
 111 module_param(latency,    int, 0444);
 112 module_param(gpiomask,   int, 0444);
 113 module_param(audioall,   int, 0444);
 114 module_param(autoload,   int, 0444);
 115
 116 module_param_array(card,     int, NULL, 0444);
 117 module_param_array(pll,      int, NULL, 0444);
 118 module_param_array(tuner,    int, NULL, 0444);
 119 module_param_array(svhs,     int, NULL, 0444);
 120 module_param_array(remote,   int, NULL, 0444);
 121 module_param_array(audiodev, int, NULL, 0444);
 122 module_param_array(audiomux, int, NULL, 0444);
 123
 124 MODULE_PARM_DESC(triton1,"set ETBF pci config bit "
 125                  "[enable bug compatibility for triton1 + others]");
 126 MODULE_PARM_DESC(vsfx,"set VSFX pci config bit "
 127                  "[yet another chipset flaw workaround]");
 128 MODULE_PARM_DESC(latency,"pci latency timer");
 129 MODULE_PARM_DESC(card,"specify TV/grabber card model, see CARDLIST file for a list");
 130 MODULE_PARM_DESC(pll,"specify installed crystal (0=none, 28=28 MHz, 35=35 MHz)");
 131 MODULE_PARM_DESC(tuner,"specify installed tuner type");
 132 MODULE_PARM_DESC(autoload, "obsolete option, please do not use anymore");
 133 MODULE_PARM_DESC(audiodev, "specify audio device:\n"
 134                 "\t\t-1 = no audio\n"
 135                 "\t\t 0 = autodetect (default)\n"
 136                 "\t\t 1 = msp3400\n"
 137                 "\t\t 2 = tda7432\n"
 138                 "\t\t 3 = tvaudio");
 139 MODULE_PARM_DESC(saa6588, "if 1, then load the saa6588 RDS module, default (0) is to use the card definition.");
 140 MODULE_PARM_DESC(no_overlay,"allow override overlay default (0 disables, 1 enables)"
 141                 " [some VIA/SIS chipsets are known to have problem with overlay]");
 142
 143 /* ----------------------------------------------------------------------- */
 144 /* list of card IDs for bt878+ cards                                       */
 145
 146 static struct CARD {
 147         unsigned id;
 148         int cardnr;
 149         char *name;
 150 } cards[] __devinitdata = {
 151         { 0x13eb0070, BTTV_BOARD_HAUPPAUGE878,  "Hauppauge WinTV" },
 152         { 0x39000070, BTTV_BOARD_HAUPPAUGE878,  "Hauppauge WinTV-D" },
 153         { 0x45000070, BTTV_BOARD_HAUPPAUGEPVR,  "Hauppauge WinTV/PVR" },
 154         { 0xff000070, BTTV_BOARD_OSPREY1x0,     "Osprey-100" },
 155         { 0xff010070, BTTV_BOARD_OSPREY2x0_SVID,"Osprey-200" },
 156         { 0xff020070, BTTV_BOARD_OSPREY500,     "Osprey-500" },
 157         { 0xff030070, BTTV_BOARD_OSPREY2000,    "Osprey-2000" },
 158         { 0xff040070, BTTV_BOARD_OSPREY540,     "Osprey-540" },
 159         { 0xff070070, BTTV_BOARD_OSPREY440,     "Osprey-440" },
 160
 161         { 0x00011002, BTTV_BOARD_ATI_TVWONDER,  "ATI TV Wonder" },
 162         { 0x00031002, BTTV_BOARD_ATI_TVWONDERVE,"ATI TV Wonder/VE" },
 163
 164         { 0x6606107d, BTTV_BOARD_WINFAST2000,   "Leadtek WinFast TV 2000" },
 165         { 0x6607107d, BTTV_BOARD_WINFASTVC100,  "Leadtek WinFast VC 100" },
 166         { 0x6609107d, BTTV_BOARD_WINFAST2000,   "Leadtek TV 2000 XP" },
 167         { 0x263610b4, BTTV_BOARD_STB2,          "STB TV PCI FM, Gateway P/N 6000704" },
 168         { 0x264510b4, BTTV_BOARD_STB2,          "STB TV PCI FM, Gateway P/N 6000704" },
 169         { 0x402010fc, BTTV_BOARD_GVBCTV3PCI,    "I-O Data Co. GV-BCTV3/PCI" },
 170         { 0x405010fc, BTTV_BOARD_GVBCTV4PCI,    "I-O Data Co. GV-BCTV4/PCI" },
 171         { 0x407010fc, BTTV_BOARD_GVBCTV5PCI,    "I-O Data Co. GV-BCTV5/PCI" },
 172         { 0xd01810fc, BTTV_BOARD_GVBCTV5PCI,    "I-O Data Co. GV-BCTV5/PCI" },
 173
 174         { 0x001211bd, BTTV_BOARD_PINNACLE,      "Pinnacle PCTV" },
 175         /* some cards ship with byteswapped IDs ... */
 176         { 0x1200bd11, BTTV_BOARD_PINNACLE,      "Pinnacle PCTV [bswap]" },
 177         { 0xff00bd11, BTTV_BOARD_PINNACLE,      "Pinnacle PCTV [bswap]" },
 178         /* this seems to happen as well ... */
 179         { 0xff1211bd, BTTV_BOARD_PINNACLE,      "Pinnacle PCTV" },
 180
 181         { 0x3000121a, BTTV_BOARD_VOODOOTV_200,  "3Dfx VoodooTV 200" },
 182         { 0x263710b4, BTTV_BOARD_VOODOOTV_FM,   "3Dfx VoodooTV FM" },
 183         { 0x3060121a, BTTV_BOARD_STB2,    "3Dfx VoodooTV 100/ STB OEM" },
 184
 185         { 0x3000144f, BTTV_BOARD_MAGICTVIEW063, "(Askey Magic/others) TView99 CPH06x" },
 186         { 0xa005144f, BTTV_BOARD_MAGICTVIEW063, "CPH06X TView99-Card" },
 187         { 0x3002144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH05x" },
 188         { 0x3005144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH061/06L (T1/LC)" },
 189         { 0x5000144f, BTTV_BOARD_MAGICTVIEW061, "Askey CPH050" },
 190         { 0x300014ff, BTTV_BOARD_MAGICTVIEW061, "TView 99 (CPH061)" },
 191         { 0x300214ff, BTTV_BOARD_PHOEBE_TVMAS,  "Phoebe TV Master (CPH060)" },
 192
 193         { 0x00011461, BTTV_BOARD_AVPHONE98,     "AVerMedia TVPhone98" },
 194         { 0x00021461, BTTV_BOARD_AVERMEDIA98,   "AVermedia TVCapture 98" },
 195         { 0x00031461, BTTV_BOARD_AVPHONE98,     "AVerMedia TVPhone98" },
 196         { 0x00041461, BTTV_BOARD_AVERMEDIA98,   "AVerMedia TVCapture 98" },
 197         { 0x03001461, BTTV_BOARD_AVERMEDIA98,   "VDOMATE TV TUNER CARD" },
 198
 199         { 0x1117153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (Philips PAL B/G)" },
 200         { 0x1118153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (Temic PAL B/G)" },
 201         { 0x1119153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (Philips PAL I)" },
 202         { 0x111a153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (Temic PAL I)" },
 203
 204         { 0x1123153b, BTTV_BOARD_TERRATVRADIO,  "Terratec TV Radio+" },
 205         { 0x1127153b, BTTV_BOARD_TERRATV,       "Terratec TV+ (V1.05)"    },
 206         /* clashes with FlyVideo
 207          *{ 0x18521852, BTTV_BOARD_TERRATV,     "Terratec TV+ (V1.10)"    }, */
 208         { 0x1134153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (LR102)" },
 209         { 0x1135153b, BTTV_BOARD_TERRATVALUER,  "Terratec TValue Radio" }, /* LR102 */
 210         { 0x5018153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue" },       /* ?? */
 211         { 0xff3b153b, BTTV_BOARD_TERRATVALUER,  "Terratec TValue Radio" }, /* ?? */
 212
 213         { 0x400015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
 214         { 0x400a15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
 215         { 0x400d15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
 216         { 0x401015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
 217         { 0x401615b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
 218
 219         { 0x1430aa00, BTTV_BOARD_PV143,         "Provideo PV143A" },
 220         { 0x1431aa00, BTTV_BOARD_PV143,         "Provideo PV143B" },
 221         { 0x1432aa00, BTTV_BOARD_PV143,         "Provideo PV143C" },
 222         { 0x1433aa00, BTTV_BOARD_PV143,         "Provideo PV143D" },
 223         { 0x1433aa03, BTTV_BOARD_PV143,         "Security Eyes" },
 224
 225         { 0x1460aa00, BTTV_BOARD_PV150,         "Provideo PV150A-1" },
 226         { 0x1461aa01, BTTV_BOARD_PV150,         "Provideo PV150A-2" },
 227         { 0x1462aa02, BTTV_BOARD_PV150,         "Provideo PV150A-3" },
 228         { 0x1463aa03, BTTV_BOARD_PV150,         "Provideo PV150A-4" },
 229
 230         { 0x1464aa04, BTTV_BOARD_PV150,         "Provideo PV150B-1" },
 231         { 0x1465aa05, BTTV_BOARD_PV150,         "Provideo PV150B-2" },
 232         { 0x1466aa06, BTTV_BOARD_PV150,         "Provideo PV150B-3" },
 233         { 0x1467aa07, BTTV_BOARD_PV150,         "Provideo PV150B-4" },
 234
 235         { 0xa132ff00, BTTV_BOARD_IVC100,        "IVC-100"  },
 236         { 0xa1550000, BTTV_BOARD_IVC200,        "IVC-200"  },
 237         { 0xa1550001, BTTV_BOARD_IVC200,        "IVC-200"  },
 238         { 0xa1550002, BTTV_BOARD_IVC200,        "IVC-200"  },
 239         { 0xa1550003, BTTV_BOARD_IVC200,        "IVC-200"  },
 240         { 0xa1550100, BTTV_BOARD_IVC200,        "IVC-200G" },
 241         { 0xa1550101, BTTV_BOARD_IVC200,        "IVC-200G" },
 242         { 0xa1550102, BTTV_BOARD_IVC200,        "IVC-200G" },
 243         { 0xa1550103, BTTV_BOARD_IVC200,        "IVC-200G" },
 244         { 0xa1550800, BTTV_BOARD_IVC200,        "IVC-200"  },
 245         { 0xa1550801, BTTV_BOARD_IVC200,        "IVC-200"  },
 246         { 0xa1550802, BTTV_BOARD_IVC200,        "IVC-200"  },
 247         { 0xa1550803, BTTV_BOARD_IVC200,        "IVC-200"  },
 248         { 0xa182ff00, BTTV_BOARD_IVC120,        "IVC-120G" },
 249         { 0xa182ff01, BTTV_BOARD_IVC120,        "IVC-120G" },
 250         { 0xa182ff02, BTTV_BOARD_IVC120,        "IVC-120G" },
 251         { 0xa182ff03, BTTV_BOARD_IVC120,        "IVC-120G" },
 252         { 0xa182ff04, BTTV_BOARD_IVC120,        "IVC-120G" },
 253         { 0xa182ff05, BTTV_BOARD_IVC120,        "IVC-120G" },
 254         { 0xa182ff06, BTTV_BOARD_IVC120,        "IVC-120G" },
 255         { 0xa182ff07, BTTV_BOARD_IVC120,        "IVC-120G" },
 256         { 0xa182ff08, BTTV_BOARD_IVC120,        "IVC-120G" },
 257         { 0xa182ff09, BTTV_BOARD_IVC120,        "IVC-120G" },
 258         { 0xa182ff0a, BTTV_BOARD_IVC120,        "IVC-120G" },
 259         { 0xa182ff0b, BTTV_BOARD_IVC120,        "IVC-120G" },
 260         { 0xa182ff0c, BTTV_BOARD_IVC120,        "IVC-120G" },
 261         { 0xa182ff0d, BTTV_BOARD_IVC120,        "IVC-120G" },
 262         { 0xa182ff0e, BTTV_BOARD_IVC120,        "IVC-120G" },
 263         { 0xa182ff0f, BTTV_BOARD_IVC120,        "IVC-120G" },
 264         { 0xf0500000, BTTV_BOARD_IVCE8784,      "IVCE-8784" },
 265         { 0xf0500001, BTTV_BOARD_IVCE8784,      "IVCE-8784" },
 266         { 0xf0500002, BTTV_BOARD_IVCE8784,      "IVCE-8784" },
 267         { 0xf0500003, BTTV_BOARD_IVCE8784,      "IVCE-8784" },
 268
 269         { 0x41424344, BTTV_BOARD_GRANDTEC,      "GrandTec Multi Capture" },
 270         { 0x01020304, BTTV_BOARD_XGUARD,        "Grandtec Grand X-Guard" },
 271
 272         { 0x18501851, BTTV_BOARD_CHRONOS_VS2,   "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
 273         { 0xa0501851, BTTV_BOARD_CHRONOS_VS2,   "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
 274         { 0x18511851, BTTV_BOARD_FLYVIDEO98EZ,  "FlyVideo 98EZ (LR51)/ CyberMail AV" },
 275         { 0x18521852, BTTV_BOARD_TYPHOON_TVIEW, "FlyVideo 98FM (LR50)/ Typhoon TView TV/FM Tuner" },
 276         { 0x41a0a051, BTTV_BOARD_FLYVIDEO_98FM, "Lifeview FlyVideo 98 LR50 Rev Q" },
 277         { 0x18501f7f, BTTV_BOARD_FLYVIDEO_98,   "Lifeview Flyvideo 98" },
 278
 279         { 0x010115cb, BTTV_BOARD_GMV1,          "AG GMV1" },
 280         { 0x010114c7, BTTV_BOARD_MODTEC_205,    "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV" },
 281
 282         { 0x10b42636, BTTV_BOARD_HAUPPAUGE878,  "STB ???" },
 283         { 0x217d6606, BTTV_BOARD_WINFAST2000,   "Leadtek WinFast TV 2000" },
 284         { 0xfff6f6ff, BTTV_BOARD_WINFAST2000,   "Leadtek WinFast TV 2000" },
 285         { 0x03116000, BTTV_BOARD_SENSORAY311,   "Sensoray 311" },
 286         { 0x00790e11, BTTV_BOARD_WINDVR,        "Canopus WinDVR PCI" },
 287         { 0xa0fca1a0, BTTV_BOARD_ZOLTRIX,       "Face to Face Tvmax" },
 288         { 0x82b2aa6a, BTTV_BOARD_SIMUS_GVC1100, "SIMUS GVC1100" },
 289         { 0x146caa0c, BTTV_BOARD_PV951,         "ituner spectra8" },
 290         { 0x200a1295, BTTV_BOARD_PXC200,        "ImageNation PXC200A" },
 291
 292         { 0x40111554, BTTV_BOARD_PV_BT878P_9B,  "Prolink Pixelview PV-BT" },
 293         { 0x17de0a01, BTTV_BOARD_KWORLD,        "Mecer TV/FM/Video Tuner" },
 294
 295         { 0x01051805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #1" },
 296         { 0x01061805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #2" },
 297         { 0x01071805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #3" },
 298         { 0x01081805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #4" },
 299
 300         { 0x15409511, BTTV_BOARD_ACORP_Y878F, "Acorp Y878F" },
 301
 302         { 0x53534149, BTTV_BOARD_SSAI_SECURITY, "SSAI Security Video Interface" },
 303         { 0x5353414a, BTTV_BOARD_SSAI_ULTRASOUND, "SSAI Ultrasound Video Interface" },
 304
 305         /* likely broken, vendor id doesn't match the other magic views ...
 306          * { 0xa0fca04f, BTTV_BOARD_MAGICTVIEW063, "Guillemot Maxi TV Video 3" }, */
 307
 308         /* Duplicate PCI ID, reconfigure for this board during the eeprom read.
 309         * { 0x13eb0070, BTTV_BOARD_HAUPPAUGE_IMPACTVCB,  "Hauppauge ImpactVCB" }, */
 310
 311         { 0x109e036e, BTTV_BOARD_CONCEPTRONIC_CTVFMI2,  "Conceptronic CTVFMi v2"},
 312
 313         /* DVB cards (using pci function .1 for mpeg data xfer) */
 314         { 0x001c11bd, BTTV_BOARD_PINNACLESAT,   "Pinnacle PCTV Sat" },
 315         { 0x01010071, BTTV_BOARD_NEBULA_DIGITV, "Nebula Electronics DigiTV" },
 316         { 0x20007063, BTTV_BOARD_PC_HDTV,       "pcHDTV HD-2000 TV"},
 317         { 0x002611bd, BTTV_BOARD_TWINHAN_DST,   "Pinnacle PCTV SAT CI" },
 318         { 0x00011822, BTTV_BOARD_TWINHAN_DST,   "Twinhan VisionPlus DVB" },
 319         { 0xfc00270f, BTTV_BOARD_TWINHAN_DST,   "ChainTech digitop DST-1000 DVB-S" },
 320         { 0x07711461, BTTV_BOARD_AVDVBT_771,    "AVermedia AverTV DVB-T 771" },
 321         { 0x07611461, BTTV_BOARD_AVDVBT_761,    "AverMedia AverTV DVB-T 761" },
 322         { 0xdb1018ac, BTTV_BOARD_DVICO_DVBT_LITE,    "DViCO FusionHDTV DVB-T Lite" },
 323         { 0xdb1118ac, BTTV_BOARD_DVICO_DVBT_LITE,    "Ultraview DVB-T Lite" },
 324         { 0xd50018ac, BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE,    "DViCO FusionHDTV 5 Lite" },
 325         { 0x00261822, BTTV_BOARD_TWINHAN_DST,   "DNTV Live! Mini "},
 326         { 0xd200dbc0, BTTV_BOARD_DVICO_FUSIONHDTV_2,    "DViCO FusionHDTV 2" },
 327         { 0x763c008a, BTTV_BOARD_GEOVISION_GV600,       "GeoVision GV-600" },
 328         { 0x18011000, BTTV_BOARD_ENLTV_FM_2,    "Encore ENL TV-FM-2" },
 329         { 0x763d800a, BTTV_BOARD_GEOVISION_GV800S, "GeoVision GV-800(S) (master)" },
 330         { 0x763d800b, BTTV_BOARD_GEOVISION_GV800S_SL,   "GeoVision GV-800(S) (slave)" },
 331         { 0x763d800c, BTTV_BOARD_GEOVISION_GV800S_SL,   "GeoVision GV-800(S) (slave)" },
 332         { 0x763d800d, BTTV_BOARD_GEOVISION_GV800S_SL,   "GeoVision GV-800(S) (slave)" },
 333
 334         { 0x15401830, BTTV_BOARD_PV183,         "Provideo PV183-1" },
 335         { 0x15401831, BTTV_BOARD_PV183,         "Provideo PV183-2" },
 336         { 0x15401832, BTTV_BOARD_PV183,         "Provideo PV183-3" },
 337         { 0x15401833, BTTV_BOARD_PV183,         "Provideo PV183-4" },
 338         { 0x15401834, BTTV_BOARD_PV183,         "Provideo PV183-5" },
 339         { 0x15401835, BTTV_BOARD_PV183,         "Provideo PV183-6" },
 340         { 0x15401836, BTTV_BOARD_PV183,         "Provideo PV183-7" },
 341         { 0x15401837, BTTV_BOARD_PV183,         "Provideo PV183-8" },
 342
 343         { 0, -1, NULL }
 344 };
 345
 346 /* ----------------------------------------------------------------------- */
 347 /* array with description for bt848 / bt878 tv/grabber cards               */
 348
 349 struct tvcard bttv_tvcards[] = {
 350         /* ---- card 0x00 ---------------------------------- */
 351         [BTTV_BOARD_UNKNOWN] = {
 352                 .name           = " *** UNKNOWN/GENERIC *** ",
 353                 .video_inputs   = 4,
 354                 .svhs           = 2,
 355                 .muxsel         = MUXSEL(2, 3, 1, 0),
 356                 .tuner_type     = UNSET,
 357                 .tuner_addr     = ADDR_UNSET,
 358         },
 359         [BTTV_BOARD_MIRO] = {
 360                 .name           = "MIRO PCTV",
 361                 .video_inputs   = 4,
 362                 /* .audio_inputs= 1, */
 363                 .svhs           = 2,
 364                 .gpiomask       = 15,
 365                 .muxsel         = MUXSEL(2, 3, 1, 1),
 366                 .gpiomux        = { 2, 0, 0, 0 },
 367                 .gpiomute       = 10,
 368                 .needs_tvaudio  = 1,
 369                 .tuner_type     = UNSET,
 370                 .tuner_addr     = ADDR_UNSET,
 371         },
 372         [BTTV_BOARD_HAUPPAUGE] = {
 373                 .name           = "Hauppauge (bt848)",
 374                 .video_inputs   = 4,
 375                 /* .audio_inputs= 1, */
 376                 .svhs           = 2,
 377                 .gpiomask       = 7,
 378                 .muxsel         = MUXSEL(2, 3, 1, 1),
 379                 .gpiomux        = { 0, 1, 2, 3 },
 380                 .gpiomute       = 4,
 381                 .needs_tvaudio  = 1,
 382                 .tuner_type     = UNSET,
 383                 .tuner_addr     = ADDR_UNSET,
 384         },
 385         [BTTV_BOARD_STB] = {
 386                 .name           = "STB, Gateway P/N 6000699 (bt848)",
 387                 .video_inputs   = 3,
 388                 /* .audio_inputs= 1, */
 389                 .svhs           = 2,
 390                 .gpiomask       = 7,
 391                 .muxsel         = MUXSEL(2, 3, 1, 1),
 392                 .gpiomux        = { 4, 0, 2, 3 },
 393                 .gpiomute       = 1,
 394                 .no_msp34xx     = 1,
 395                 .needs_tvaudio  = 1,
 396                 .tuner_type     = TUNER_PHILIPS_NTSC,
 397                 .tuner_addr     = ADDR_UNSET,
 398                 .pll            = PLL_28,
 399                 .has_radio      = 1,
 400         },
 401
 402         /* ---- card 0x04 ---------------------------------- */
 403         [BTTV_BOARD_INTEL] = {
 404                 .name           = "Intel Create and Share PCI/ Smart Video Recorder III",
 405                 .video_inputs   = 4,
 406                 /* .audio_inputs= 0, */
 407                 .svhs           = 2,
 408                 .gpiomask       = 0,
 409                 .muxsel         = MUXSEL(2, 3, 1, 1),
 410                 .gpiomux        = { 0 },
 411                 .needs_tvaudio  = 0,
 412                 .tuner_type     = TUNER_ABSENT,
 413                 .tuner_addr     = ADDR_UNSET,
 414         },
 415         [BTTV_BOARD_DIAMOND] = {
 416                 .name           = "Diamond DTV2000",
 417                 .video_inputs   = 4,
 418                 /* .audio_inputs= 1, */
 419                 .svhs           = 2,
 420                 .gpiomask       = 3,
 421                 .muxsel         = MUXSEL(2, 3, 1, 0),
 422                 .gpiomux        = { 0, 1, 0, 1 },
 423                 .gpiomute       = 3,
 424                 .needs_tvaudio  = 1,
 425                 .tuner_type     = UNSET,
 426                 .tuner_addr     = ADDR_UNSET,
 427         },
 428         [BTTV_BOARD_AVERMEDIA] = {
 429                 .name           = "AVerMedia TVPhone",
 430                 .video_inputs   = 3,
 431                 /* .audio_inputs= 1, */
 432                 .svhs           = 3,
 433                 .muxsel         = MUXSEL(2, 3, 1, 1),
 434                 .gpiomask       = 0x0f,
 435                 .gpiomux        = { 0x0c, 0x04, 0x08, 0x04 },
 436                 /*                0x04 for some cards ?? */
 437                 .needs_tvaudio  = 1,
 438                 .tuner_type     = UNSET,
 439                 .tuner_addr     = ADDR_UNSET,
 440                 .audio_mode_gpio= avermedia_tvphone_audio,
 441                 .has_remote     = 1,
 442         },
 443         [BTTV_BOARD_MATRIX_VISION] = {
 444                 .name           = "MATRIX-Vision MV-Delta",
 445                 .video_inputs   = 5,
 446                 /* .audio_inputs= 1, */
 447                 .svhs           = 3,
 448                 .gpiomask       = 0,
 449                 .muxsel         = MUXSEL(2, 3, 1, 0, 0),
 450                 .gpiomux        = { 0 },
 451                 .needs_tvaudio  = 1,
 452                 .tuner_type     = TUNER_ABSENT,
 453                 .tuner_addr     = ADDR_UNSET,
 454         },
 455
 456         /* ---- card 0x08 ---------------------------------- */
 457         [BTTV_BOARD_FLYVIDEO] = {
 458                 .name           = "Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26",
 459                 .video_inputs   = 4,
 460                 /* .audio_inputs= 1, */
 461                 .svhs           = 2,
 462                 .gpiomask       = 0xc00,
 463                 .muxsel         = MUXSEL(2, 3, 1, 1),
 464                 .gpiomux        = { 0, 0xc00, 0x800, 0x400 },
 465                 .gpiomute       = 0xc00,
 466                 .needs_tvaudio  = 1,
 467                 .pll            = PLL_28,
 468                 .tuner_type     = UNSET,
 469                 .tuner_addr     = ADDR_UNSET,
 470         },
 471         [BTTV_BOARD_TURBOTV] = {
 472                 .name           = "IMS/IXmicro TurboTV",
 473                 .video_inputs   = 3,
 474                 /* .audio_inputs= 1, */
 475                 .svhs           = 2,
 476                 .gpiomask       = 3,
 477                 .muxsel         = MUXSEL(2, 3, 1, 1),
 478                 .gpiomux        = { 1, 1, 2, 3 },
 479                 .needs_tvaudio  = 0,
 480                 .pll            = PLL_28,
 481                 .tuner_type     = TUNER_TEMIC_PAL,
 482                 .tuner_addr     = ADDR_UNSET,
 483         },
 484         [BTTV_BOARD_HAUPPAUGE878] = {
 485                 .name           = "Hauppauge (bt878)",
 486                 .video_inputs   = 4,
 487                 /* .audio_inputs= 1, */
 488                 .svhs           = 2,
 489                 .gpiomask       = 0x0f, /* old: 7 */
 490                 .muxsel         = MUXSEL(2, 0, 1, 1),
 491                 .gpiomux        = { 0, 1, 2, 3 },
 492                 .gpiomute       = 4,
 493                 .needs_tvaudio  = 1,
 494                 .pll            = PLL_28,
 495                 .tuner_type     = UNSET,
 496                 .tuner_addr     = ADDR_UNSET,
 497         },
 498         [BTTV_BOARD_MIROPRO] = {
 499                 .name           = "MIRO PCTV pro",
 500                 .video_inputs   = 3,
 501                 /* .audio_inputs= 1, */
 502                 .svhs           = 2,
 503                 .gpiomask       = 0x3014f,
 504                 .muxsel         = MUXSEL(2, 3, 1, 1),
 505                 .gpiomux        = { 0x20001,0x10001, 0, 0 },
 506                 .gpiomute       = 10,
 507                 .needs_tvaudio  = 1,
 508                 .tuner_type     = UNSET,
 509                 .tuner_addr     = ADDR_UNSET,
 510         },
 511
 512         /* ---- card 0x0c ---------------------------------- */
 513         [BTTV_BOARD_ADSTECH_TV] = {
 514                 .name           = "ADS Technologies Channel Surfer TV (bt848)",
 515                 .video_inputs   = 3,
 516                 /* .audio_inputs= 1, */
 517                 .svhs           = 2,
 518                 .gpiomask       = 15,
 519                 .muxsel         = MUXSEL(2, 3, 1, 1),
 520                 .gpiomux        = { 13, 14, 11, 7 },
 521                 .needs_tvaudio  = 1,
 522                 .tuner_type     = UNSET,
 523                 .tuner_addr     = ADDR_UNSET,
 524         },
 525         [BTTV_BOARD_AVERMEDIA98] = {
 526                 .name           = "AVerMedia TVCapture 98",
 527                 .video_inputs   = 3,
 528                 /* .audio_inputs= 4, */
 529                 .svhs           = 2,
 530                 .gpiomask       = 15,
 531                 .muxsel         = MUXSEL(2, 3, 1, 1),
 532                 .gpiomux        = { 13, 14, 11, 7 },
 533                 .needs_tvaudio  = 1,
 534                 .msp34xx_alt    = 1,
 535                 .pll            = PLL_28,
 536                 .tuner_type     = TUNER_PHILIPS_PAL,
 537                 .tuner_addr     = ADDR_UNSET,
 538                 .audio_mode_gpio= avermedia_tv_stereo_audio,
 539                 .no_gpioirq     = 1,
 540         },
 541         [BTTV_BOARD_VHX] = {
 542                 .name           = "Aimslab Video Highway Xtreme (VHX)",
 543                 .video_inputs   = 3,
 544                 /* .audio_inputs= 1, */
 545                 .svhs           = 2,
 546                 .gpiomask       = 7,
 547                 .muxsel         = MUXSEL(2, 3, 1, 1),
 548                 .gpiomux        = { 0, 2, 1, 3 }, /* old: {0, 1, 2, 3, 4} */
 549                 .gpiomute       = 4,
 550                 .needs_tvaudio  = 1,
 551                 .pll            = PLL_28,
 552                 .tuner_type     = UNSET,
 553                 .tuner_addr     = ADDR_UNSET,
 554         },
 555         [BTTV_BOARD_ZOLTRIX] = {
 556                 .name           = "Zoltrix TV-Max",
 557                 .video_inputs   = 3,
 558                 /* .audio_inputs= 1, */
 559                 .svhs           = 2,
 560                 .gpiomask       = 15,
 561                 .muxsel         = MUXSEL(2, 3, 1, 1),
 562                 .gpiomux        = { 0, 0, 1, 0 },
 563                 .gpiomute       = 10,
 564                 .needs_tvaudio  = 1,
 565                 .tuner_type     = UNSET,
 566                 .tuner_addr     = ADDR_UNSET,
 567         },
 568
 569         /* ---- card 0x10 ---------------------------------- */
 570         [BTTV_BOARD_PIXVIEWPLAYTV] = {
 571                 .name           = "Prolink Pixelview PlayTV (bt878)",
 572                 .video_inputs   = 3,
 573                 /* .audio_inputs= 1, */
 574                 .svhs           = 2,
 575                 .gpiomask       = 0x01fe00,
 576                 .muxsel         = MUXSEL(2, 3, 1, 1),
 577                 /* 2003-10-20 by "Anton A. Arapov" <arapov@mail.ru> */
 578                 .gpiomux        = { 0x001e00, 0, 0x018000, 0x014000 },
 579                 .gpiomute       = 0x002000,
 580                 .needs_tvaudio  = 1,
 581                 .pll            = PLL_28,
 582                 .tuner_type     = UNSET,
 583                 .tuner_addr     = ADDR_UNSET,
 584         },
 585         [BTTV_BOARD_WINVIEW_601] = {
 586                 .name           = "Leadtek WinView 601",
 587                 .video_inputs   = 3,
 588                 /* .audio_inputs= 1, */
 589                 .svhs           = 2,
 590                 .gpiomask       = 0x8300f8,
 591                 .muxsel         = MUXSEL(2, 3, 1, 1, 0),
 592                 .gpiomux        = { 0x4fa007,0xcfa007,0xcfa007,0xcfa007 },
 593                 .gpiomute       = 0xcfa007,
 594                 .needs_tvaudio  = 1,
 595                 .tuner_type     = UNSET,
 596                 .tuner_addr     = ADDR_UNSET,
 597                 .volume_gpio    = winview_volume,
 598                 .has_radio      = 1,
 599         },
 600         [BTTV_BOARD_AVEC_INTERCAP] = {
 601                 .name           = "AVEC Intercapture",
 602                 .video_inputs   = 3,
 603                 /* .audio_inputs= 2, */
 604                 .svhs           = 2,
 605                 .gpiomask       = 0,
 606                 .muxsel         = MUXSEL(2, 3, 1, 1),
 607                 .gpiomux        = { 1, 0, 0, 0 },
 608                 .needs_tvaudio  = 1,
 609                 .tuner_type     = UNSET,
 610                 .tuner_addr     = ADDR_UNSET,
 611         },
 612         [BTTV_BOARD_LIFE_FLYKIT] = {
 613                 .name           = "Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture only)",
 614                 .video_inputs   = 4,
 615                 /* .audio_inputs= 1, */
 616                 .svhs           = NO_SVHS,
 617                 .gpiomask       = 0x8dff00,
 618                 .muxsel         = MUXSEL(2, 3, 1, 1),
 619                 .gpiomux        = { 0 },
 620                 .no_msp34xx     = 1,
 621                 .tuner_type     = TUNER_ABSENT,
 622                 .tuner_addr     = ADDR_UNSET,
 623         },
 624
 625         /* ---- card 0x14 ---------------------------------- */
 626         [BTTV_BOARD_CEI_RAFFLES] = {
 627                 .name           = "CEI Raffles Card",
 628                 .video_inputs   = 3,
 629                 /* .audio_inputs= 3, */
 630                 .svhs           = 2,
 631                 .muxsel         = MUXSEL(2, 3, 1, 1),
 632                 .tuner_type     = UNSET,
 633                 .tuner_addr     = ADDR_UNSET,
 634         },
 635         [BTTV_BOARD_CONFERENCETV] = {
 636                 .name           = "Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50",
 637                 .video_inputs   = 4,
 638                 /* .audio_inputs= 2,  tuner, line in */
 639                 .svhs           = 2,
 640                 .gpiomask       = 0x1800,
 641                 .muxsel         = MUXSEL(2, 3, 1, 1),
 642                 .gpiomux        = { 0, 0x800, 0x1000, 0x1000 },
 643                 .gpiomute       = 0x1800,
 644                 .pll            = PLL_28,
 645                 .tuner_type     = TUNER_PHILIPS_PAL_I,
 646                 .tuner_addr     = ADDR_UNSET,
 647         },
 648         [BTTV_BOARD_PHOEBE_TVMAS] = {
 649                 .name           = "Askey CPH050/ Phoebe Tv Master + FM",
 650                 .video_inputs   = 3,
 651                 /* .audio_inputs= 1, */
 652                 .svhs           = 2,
 653                 .gpiomask       = 0xc00,
 654                 .muxsel         = MUXSEL(2, 3, 1, 1),
 655                 .gpiomux        = { 0, 1, 0x800, 0x400 },
 656                 .gpiomute       = 0xc00,
 657                 .needs_tvaudio  = 1,
 658                 .pll            = PLL_28,
 659                 .tuner_type     = UNSET,
 660                 .tuner_addr     = ADDR_UNSET,
 661         },
 662         [BTTV_BOARD_MODTEC_205] = {
 663                 .name           = "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878",
 664                 .video_inputs   = 3,
 665                 /* .audio_inputs= 1, */
 666                 .svhs           = NO_SVHS,
 667                 .has_dig_in     = 1,
 668                 .gpiomask       = 7,
 669                 .muxsel         = MUXSEL(2, 3, 0), /* input 2 is digital */
 670                 /* .digital_mode= DIGITAL_MODE_CAMERA, */
 671                 .gpiomux        = { 0, 0, 0, 0 },
 672                 .no_msp34xx     = 1,
 673                 .pll            = PLL_28,
 674                 .tuner_type     = TUNER_ALPS_TSBB5_PAL_I,
 675                 .tuner_addr     = ADDR_UNSET,
 676         },
 677
 678         /* ---- card 0x18 ---------------------------------- */
 679         [BTTV_BOARD_MAGICTVIEW061] = {
 680                 .name           = "Askey CPH05X/06X (bt878) [many vendors]",
 681                 .video_inputs   = 3,
 682                 /* .audio_inputs= 1, */
 683                 .svhs           = 2,
 684                 .gpiomask       = 0xe00,
 685                 .muxsel         = MUXSEL(2, 3, 1, 1),
 686                 .gpiomux        = {0x400, 0x400, 0x400, 0x400 },
 687                 .gpiomute       = 0xc00,
 688                 .needs_tvaudio  = 1,
 689                 .pll            = PLL_28,
 690                 .tuner_type     = UNSET,
 691                 .tuner_addr     = ADDR_UNSET,
 692                 .has_remote     = 1,
 693         },
 694         [BTTV_BOARD_VOBIS_BOOSTAR] = {
 695                 .name           = "Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar",
 696                 .video_inputs   = 3,
 697                 /* .audio_inputs= 1, */
 698                 .svhs           = 2,
 699                 .gpiomask       = 0x1f0fff,
 700                 .muxsel         = MUXSEL(2, 3, 1, 1),
 701                 .gpiomux        = { 0x20000, 0x30000, 0x10000, 0 },
 702                 .gpiomute       = 0x40000,
 703                 .needs_tvaudio  = 0,
 704                 .tuner_type     = TUNER_PHILIPS_PAL,
 705                 .tuner_addr     = ADDR_UNSET,
 706                 .audio_mode_gpio= terratv_audio,
 707         },
 708         [BTTV_BOARD_HAUPPAUG_WCAM] = {
 709                 .name           = "Hauppauge WinCam newer (bt878)",
 710                 .video_inputs   = 4,
 711                 /* .audio_inputs= 1, */
 712                 .svhs           = 3,
 713                 .gpiomask       = 7,
 714                 .muxsel         = MUXSEL(2, 0, 1, 1),
 715                 .gpiomux        = { 0, 1, 2, 3 },
 716                 .gpiomute       = 4,
 717                 .needs_tvaudio  = 1,
 718                 .tuner_type     = UNSET,
 719                 .tuner_addr     = ADDR_UNSET,
 720         },
 721         [BTTV_BOARD_MAXI] = {
 722                 .name           = "Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50",
 723                 .video_inputs   = 4,
 724                 /* .audio_inputs= 2, */
 725                 .svhs           = 2,
 726                 .gpiomask       = 0x1800,
 727                 .muxsel         = MUXSEL(2, 3, 1, 1),
 728                 .gpiomux        = { 0, 0x800, 0x1000, 0x1000 },
 729                 .gpiomute       = 0x1800,
 730                 .pll            = PLL_28,
 731                 .tuner_type     = TUNER_PHILIPS_SECAM,
 732                 .tuner_addr     = ADDR_UNSET,
 733         },
 734
 735         /* ---- card 0x1c ---------------------------------- */
 736         [BTTV_BOARD_TERRATV] = {
 737                 .name           = "Terratec TerraTV+ Version 1.1 (bt878)",
 738                 .video_inputs   = 3,
 739                 /* .audio_inputs= 1, */
 740                 .svhs           = 2,
 741                 .gpiomask       = 0x1f0fff,
 742                 .muxsel         = MUXSEL(2, 3, 1, 1),
 743                 .gpiomux        = { 0x20000, 0x30000, 0x10000, 0x00000 },
 744                 .gpiomute       = 0x40000,
 745                 .needs_tvaudio  = 0,
 746                 .tuner_type     = TUNER_PHILIPS_PAL,
 747                 .tuner_addr     = ADDR_UNSET,
 748                 .audio_mode_gpio= terratv_audio,
 749                 /* GPIO wiring:
 750                 External 20 pin connector (for Active Radio Upgrade board)
 751                 gpio00: i2c-sda
 752                 gpio01: i2c-scl
 753                 gpio02: om5610-data
 754                 gpio03: om5610-clk
 755                 gpio04: om5610-wre
 756                 gpio05: om5610-stereo
 757                 gpio06: rds6588-davn
 758                 gpio07: Pin 7 n.c.
 759                 gpio08: nIOW
 760                 gpio09+10: nIOR, nSEL ?? (bt878)
 761                         gpio09: nIOR (bt848)
 762                         gpio10: nSEL (bt848)
 763                 Sound Routing:
 764                 gpio16: u2-A0 (1st 4052bt)
 765                 gpio17: u2-A1
 766                 gpio18: u2-nEN
 767                 gpio19: u4-A0 (2nd 4052)
 768                 gpio20: u4-A1
 769                         u4-nEN - GND
 770                 Btspy:
 771                         00000 : Cdrom (internal audio input)
 772                         10000 : ext. Video audio input
 773                         20000 : TV Mono
 774                         a0000 : TV Mono/2
 775                 1a0000 : TV Stereo
 776                         30000 : Radio
 777                         40000 : Mute
 778         */
 779
 780         },
 781         [BTTV_BOARD_PXC200] = {
 782                 /* Jannik Fritsch <jannik@techfak.uni-bielefeld.de> */
 783                 .name           = "Imagenation PXC200",
 784                 .video_inputs   = 5,
 785                 /* .audio_inputs= 1, */
 786                 .svhs           = 1, /* was: 4 */
 787                 .gpiomask       = 0,
 788                 .muxsel         = MUXSEL(2, 3, 1, 0, 0),
 789                 .gpiomux        = { 0 },
 790                 .needs_tvaudio  = 1,
 791                 .tuner_type     = TUNER_ABSENT,
 792                 .tuner_addr     = ADDR_UNSET,
 793                 .muxsel_hook    = PXC200_muxsel,
 794
 795         },
 796         [BTTV_BOARD_FLYVIDEO_98] = {
 797                 .name           = "Lifeview FlyVideo 98 LR50",
 798                 .video_inputs   = 4,
 799                 /* .audio_inputs= 1, */
 800                 .svhs           = 2,
 801                 .gpiomask       = 0x1800,  /* 0x8dfe00 */
 802                 .muxsel         = MUXSEL(2, 3, 1, 1),
 803                 .gpiomux        = { 0, 0x0800, 0x1000, 0x1000 },
 804                 .gpiomute       = 0x1800,
 805                 .pll            = PLL_28,
 806                 .tuner_type     = UNSET,
 807                 .tuner_addr     = ADDR_UNSET,
 808         },
 809         [BTTV_BOARD_IPROTV] = {
 810                 .name           = "Formac iProTV, Formac ProTV I (bt848)",
 811                 .video_inputs   = 4,
 812                 /* .audio_inputs= 1, */
 813                 .svhs           = 3,
 814                 .gpiomask       = 1,
 815                 .muxsel         = MUXSEL(2, 3, 1, 1),
 816                 .gpiomux        = { 1, 0, 0, 0 },
 817                 .pll            = PLL_28,
 818                 .tuner_type     = TUNER_PHILIPS_PAL,
 819                 .tuner_addr     = ADDR_UNSET,
 820         },
 821
 822         /* ---- card 0x20 ---------------------------------- */
 823         [BTTV_BOARD_INTEL_C_S_PCI] = {
 824                 .name           = "Intel Create and Share PCI/ Smart Video Recorder III",
 825                 .video_inputs   = 4,
 826                 /* .audio_inputs= 0, */
 827                 .svhs           = 2,
 828                 .gpiomask       = 0,
 829                 .muxsel         = MUXSEL(2, 3, 1, 1),
 830                 .gpiomux        = { 0 },
 831                 .needs_tvaudio  = 0,
 832                 .tuner_type     = TUNER_ABSENT,
 833                 .tuner_addr     = ADDR_UNSET,
 834         },
 835         [BTTV_BOARD_TERRATVALUE] = {
 836                 .name           = "Terratec TerraTValue Version Bt878",
 837                 .video_inputs   = 3,
 838                 /* .audio_inputs= 1, */
 839                 .svhs           = 2,
 840                 .gpiomask       = 0xffff00,
 841                 .muxsel         = MUXSEL(2, 3, 1, 1),
 842                 .gpiomux        = { 0x500, 0, 0x300, 0x900 },
 843                 .gpiomute       = 0x900,
 844                 .needs_tvaudio  = 1,
 845                 .pll            = PLL_28,
 846                 .tuner_type     = TUNER_PHILIPS_PAL,
 847                 .tuner_addr     = ADDR_UNSET,
 848         },
 849         [BTTV_BOARD_WINFAST2000] = {
 850                 .name           = "Leadtek WinFast 2000/ WinFast 2000 XP",
 851                 .video_inputs   = 4,
 852                 /* .audio_inputs= 1, */
 853                 .svhs           = 2,
 854                 /* TV, CVid, SVid, CVid over SVid connector */
 855                 .muxsel         = MUXSEL(2, 3, 1, 1, 0),
 856                 /* Alexander Varakin <avarakin@hotmail.com> [stereo version] */
 857                 .gpiomask       = 0xb33000,
 858                 .gpiomux        = { 0x122000,0x1000,0x0000,0x620000 },
 859                 .gpiomute       = 0x800000,
 860                 /* Audio Routing for "WinFast 2000 XP" (no tv stereo !)
 861                         gpio23 -- hef4052:nEnable (0x800000)
 862                         gpio12 -- hef4052:A1
 863                         gpio13 -- hef4052:A0
 864                 0x0000: external audio
 865                 0x1000: FM
 866                 0x2000: TV
 867                 0x3000: n.c.
 868                 Note: There exists another variant "Winfast 2000" with tv stereo !?
 869                 Note: eeprom only contains FF and pci subsystem id 107d:6606
 870                 */
 871                 .needs_tvaudio  = 0,
 872                 .pll            = PLL_28,
 873                 .has_radio      = 1,
 874                 .tuner_type     = TUNER_PHILIPS_PAL, /* default for now, gpio reads BFFF06 for Pal bg+dk */
 875                 .tuner_addr     = ADDR_UNSET,
 876                 .audio_mode_gpio= winfast2000_audio,
 877                 .has_remote     = 1,
 878         },
 879         [BTTV_BOARD_CHRONOS_VS2] = {
 880                 .name           = "Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II",
 881                 .video_inputs   = 4,
 882                 /* .audio_inputs= 3, */
 883                 .svhs           = 2,
 884                 .gpiomask       = 0x1800,
 885                 .muxsel         = MUXSEL(2, 3, 1, 1),
 886                 .gpiomux        = { 0, 0x800, 0x1000, 0x1000 },
 887                 .gpiomute       = 0x1800,
 888                 .pll            = PLL_28,
 889                 .tuner_type     = UNSET,
 890                 .tuner_addr     = ADDR_UNSET,
 891         },
 892
 893         /* ---- card 0x24 ---------------------------------- */
 894         [BTTV_BOARD_TYPHOON_TVIEW] = {
 895                 .name           = "Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner",
 896                 .video_inputs   = 4,
 897                 /* .audio_inputs= 3, */
 898                 .svhs           = 2,
 899                 .gpiomask       = 0x1800,
 900                 .muxsel         = MUXSEL(2, 3, 1, 1),
 901                 .gpiomux        = { 0, 0x800, 0x1000, 0x1000 },
 902                 .gpiomute       = 0x1800,
 903                 .pll            = PLL_28,
 904                 .tuner_type     = UNSET,
 905                 .tuner_addr     = ADDR_UNSET,
 906                 .has_radio      = 1,
 907         },
 908         [BTTV_BOARD_PXELVWPLTVPRO] = {
 909                 .name           = "Prolink PixelView PlayTV pro",
 910                 .video_inputs   = 3,
 911                 /* .audio_inputs= 1, */
 912                 .svhs           = 2,
 913                 .gpiomask       = 0xff,
 914                 .muxsel         = MUXSEL(2, 3, 1, 1),
 915                 .gpiomux        = { 0x21, 0x20, 0x24, 0x2c },
 916                 .gpiomute       = 0x29,
 917                 .no_msp34xx     = 1,
 918                 .pll            = PLL_28,
 919                 .tuner_type     = UNSET,
 920                 .tuner_addr     = ADDR_UNSET,
 921         },
 922         [BTTV_BOARD_MAGICTVIEW063] = {
 923                 .name           = "Askey CPH06X TView99",
 924                 .video_inputs   = 4,
 925                 /* .audio_inputs= 1, */
 926                 .svhs           = 2,
 927                 .gpiomask       = 0x551e00,
 928                 .muxsel         = MUXSEL(2, 3, 1, 0),
 929                 .gpiomux        = { 0x551400, 0x551200, 0, 0 },
 930                 .gpiomute       = 0x551c00,
 931                 .needs_tvaudio  = 1,
 932                 .pll            = PLL_28,
 933                 .tuner_type     = TUNER_PHILIPS_PAL_I,
 934                 .tuner_addr     = ADDR_UNSET,
 935                 .has_remote     = 1,
 936         },
 937         [BTTV_BOARD_PINNACLE] = {
 938                 .name           = "Pinnacle PCTV Studio/Rave",
 939                 .video_inputs   = 3,
 940                 /* .audio_inputs= 1, */
 941                 .svhs           = 2,
 942                 .gpiomask       = 0x03000F,
 943                 .muxsel         = MUXSEL(2, 3, 1, 1),
 944                 .gpiomux        = { 2, 0xd0001, 0, 0 },
 945                 .gpiomute       = 1,
 946                 .needs_tvaudio  = 0,
 947                 .pll            = PLL_28,
 948                 .tuner_type     = UNSET,
 949                 .tuner_addr     = ADDR_UNSET,
 950         },
 951
 952         /* ---- card 0x28 ---------------------------------- */
 953         [BTTV_BOARD_STB2] = {
 954                 .name           = "STB TV PCI FM, Gateway P/N 6000704 (bt878), 3Dfx VoodooTV 100",
 955                 .video_inputs   = 3,
 956                 /* .audio_inputs= 1, */
 957                 .svhs           = 2,
 958                 .gpiomask       = 7,
 959                 .muxsel         = MUXSEL(2, 3, 1, 1),
 960                 .gpiomux        = { 4, 0, 2, 3 },
 961                 .gpiomute       = 1,
 962                 .no_msp34xx     = 1,
 963                 .needs_tvaudio  = 1,
 964                 .tuner_type     = TUNER_PHILIPS_NTSC,
 965                 .tuner_addr     = ADDR_UNSET,
 966                 .pll            = PLL_28,
 967                 .has_radio      = 1,
 968         },
 969         [BTTV_BOARD_AVPHONE98] = {
 970                 .name           = "AVerMedia TVPhone 98",
 971                 .video_inputs   = 3,
 972                 /* .audio_inputs= 4, */
 973                 .svhs           = 2,
 974                 .gpiomask       = 15,
 975                 .muxsel         = MUXSEL(2, 3, 1, 1),
 976                 .gpiomux        = { 13, 4, 11, 7 },
 977                 .needs_tvaudio  = 1,
 978                 .pll            = PLL_28,
 979                 .tuner_type     = UNSET,
 980                 .tuner_addr     = ADDR_UNSET,
 981                 .has_radio      = 1,
 982                 .audio_mode_gpio= avermedia_tvphone_audio,
 983         },
 984         [BTTV_BOARD_PV951] = {
 985                 .name           = "ProVideo PV951", /* pic16c54 */
 986                 .video_inputs   = 3,
 987                 /* .audio_inputs= 1, */
 988                 .svhs           = 2,
 989                 .gpiomask       = 0,
 990                 .muxsel         = MUXSEL(2, 3, 1, 1),
 991                 .gpiomux        = { 0, 0, 0, 0},
 992                 .needs_tvaudio  = 1,
 993                 .no_msp34xx     = 1,
 994                 .pll            = PLL_28,
 995                 .tuner_type     = TUNER_PHILIPS_PAL_I,
 996                 .tuner_addr     = ADDR_UNSET,
 997         },
 998         [BTTV_BOARD_ONAIR_TV] = {
 999                 .name           = "Little OnAir TV",
1000                 .video_inputs   = 3,
1001                 /* .audio_inputs= 1, */
1002                 .svhs           = 2,
1003                 .gpiomask       = 0xe00b,
1004                 .muxsel         = MUXSEL(2, 3, 1, 1),
1005                 .gpiomux        = { 0xff9ff6, 0xff9ff6, 0xff1ff7, 0 },
1006                 .gpiomute       = 0xff3ffc,
1007                 .no_msp34xx     = 1,
1008                 .tuner_type     = UNSET,
1009                 .tuner_addr     = ADDR_UNSET,
1010         },
1011
1012         /* ---- card 0x2c ---------------------------------- */
1013         [BTTV_BOARD_SIGMA_TVII_FM] = {
1014                 .name           = "Sigma TVII-FM",
1015                 .video_inputs   = 2,
1016                 /* .audio_inputs= 1, */
1017                 .svhs           = NO_SVHS,
1018                 .gpiomask       = 3,
1019                 .muxsel         = MUXSEL(2, 3, 1, 1),
1020                 .gpiomux        = { 1, 1, 0, 2 },
1021                 .gpiomute       = 3,
1022                 .no_msp34xx     = 1,
1023                 .pll            = PLL_NONE,
1024                 .tuner_type     = UNSET,
1025                 .tuner_addr     = ADDR_UNSET,
1026         },
1027         [BTTV_BOARD_MATRIX_VISION2] = {
1028                 .name           = "MATRIX-Vision MV-Delta 2",
1029                 .video_inputs   = 5,
1030                 /* .audio_inputs= 1, */
1031                 .svhs           = 3,
1032                 .gpiomask       = 0,
1033                 .muxsel         = MUXSEL(2, 3, 1, 0, 0),
1034                 .gpiomux        = { 0 },
1035                 .no_msp34xx     = 1,
1036                 .pll            = PLL_28,
1037                 .tuner_type     = TUNER_ABSENT,
1038                 .tuner_addr     = ADDR_UNSET,
1039         },
1040         [BTTV_BOARD_ZOLTRIX_GENIE] = {
1041                 .name           = "Zoltrix Genie TV/FM",
1042                 .video_inputs   = 3,
1043                 /* .audio_inputs= 1, */
1044                 .svhs           = 2,
1045                 .gpiomask       = 0xbcf03f,
1046                 .muxsel         = MUXSEL(2, 3, 1, 1),
1047                 .gpiomux        = { 0xbc803f, 0xbc903f, 0xbcb03f, 0 },
1048                 .gpiomute       = 0xbcb03f,
1049                 .no_msp34xx     = 1,
1050                 .pll            = PLL_28,
1051                 .tuner_type     = TUNER_TEMIC_4039FR5_NTSC,
1052                 .tuner_addr     = ADDR_UNSET,
1053         },
1054         [BTTV_BOARD_TERRATVRADIO] = {
1055                 .name           = "Terratec TV/Radio+",
1056                 .video_inputs   = 3,
1057                 /* .audio_inputs= 1, */
1058                 .svhs           = 2,
1059                 .gpiomask       = 0x70000,
1060                 .muxsel         = MUXSEL(2, 3, 1, 1),
1061                 .gpiomux        = { 0x20000, 0x30000, 0x10000, 0 },
1062                 .gpiomute       = 0x40000,
1063                 .needs_tvaudio  = 1,
1064                 .no_msp34xx     = 1,
1065                 .pll            = PLL_35,
1066                 .tuner_type     = TUNER_PHILIPS_PAL_I,
1067                 .tuner_addr     = ADDR_UNSET,
1068                 .has_radio      = 1,
1069         },
1070
1071         /* ---- card 0x30 ---------------------------------- */
1072         [BTTV_BOARD_DYNALINK] = {
1073                 .name           = "Askey CPH03x/ Dynalink Magic TView",
1074                 .video_inputs   = 3,
1075                 /* .audio_inputs= 1, */
1076                 .svhs           = 2,
1077                 .gpiomask       = 15,
1078                 .muxsel         = MUXSEL(2, 3, 1, 1),
1079                 .gpiomux        = {2,0,0,0 },
1080                 .gpiomute       = 1,
1081                 .needs_tvaudio  = 1,
1082                 .pll            = PLL_28,
1083                 .tuner_type     = UNSET,
1084                 .tuner_addr     = ADDR_UNSET,
1085         },
1086         [BTTV_BOARD_GVBCTV3PCI] = {
1087                 .name           = "IODATA GV-BCTV3/PCI",
1088                 .video_inputs   = 3,
1089                 /* .audio_inputs= 1, */
1090                 .svhs           = 2,
1091                 .gpiomask       = 0x010f00,
1092                 .muxsel         = MUXSEL(2, 3, 0, 0),
1093                 .gpiomux        = {0x10000, 0, 0x10000, 0 },
1094                 .no_msp34xx     = 1,
1095                 .pll            = PLL_28,
1096                 .tuner_type     = TUNER_ALPS_TSHC6_NTSC,
1097                 .tuner_addr     = ADDR_UNSET,
1098                 .audio_mode_gpio= gvbctv3pci_audio,
1099         },
1100         [BTTV_BOARD_PXELVWPLTVPAK] = {
1101                 .name           = "Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP",
1102                 .video_inputs   = 5,
1103                 /* .audio_inputs= 1, */
1104                 .svhs           = 3,
1105                 .has_dig_in     = 1,
1106                 .gpiomask       = 0xAA0000,
1107                 .muxsel         = MUXSEL(2, 3, 1, 1, 0), /* in 4 is digital */
1108                 /* .digital_mode= DIGITAL_MODE_CAMERA, */
1109                 .gpiomux        = { 0x20000, 0, 0x80000, 0x80000 },
1110                 .gpiomute       = 0xa8000,
1111                 .no_msp34xx     = 1,
1112                 .pll            = PLL_28,
1113                 .tuner_type     = TUNER_PHILIPS_PAL_I,
1114                 .tuner_addr     = ADDR_UNSET,
1115                 .has_remote     = 1,
1116                 /* GPIO wiring: (different from Rev.4C !)
1117                         GPIO17: U4.A0 (first hef4052bt)
1118                         GPIO19: U4.A1
1119                         GPIO20: U5.A1 (second hef4052bt)
1120                         GPIO21: U4.nEN
1121                         GPIO22: BT832 Reset Line
1122                         GPIO23: A5,A0, U5,nEN
1123                 Note: At i2c=0x8a is a Bt832 chip, which changes to 0x88 after being reset via GPIO22
1124                 */
1125         },
1126         [BTTV_BOARD_EAGLE] = {
1127                 .name           = "Eagle Wireless Capricorn2 (bt878A)",
1128                 .video_inputs   = 4,
1129                 /* .audio_inputs= 1, */
1130                 .svhs           = 2,
1131                 .gpiomask       = 7,
1132                 .muxsel         = MUXSEL(2, 0, 1, 1),
1133                 .gpiomux        = { 0, 1, 2, 3 },
1134                 .gpiomute       = 4,
1135                 .pll            = PLL_28,
1136                 .tuner_type     = UNSET /* TUNER_ALPS_TMDH2_NTSC */,
1137                 .tuner_addr     = ADDR_UNSET,
1138         },
1139
1140         /* ---- card 0x34 ---------------------------------- */
1141         [BTTV_BOARD_PINNACLEPRO] = {
1142                 /* David Härdeman <david@2gen.com> */
1143                 .name           = "Pinnacle PCTV Studio Pro",
1144                 .video_inputs   = 4,
1145                 /* .audio_inputs= 1, */
1146                 .svhs           = 3,
1147                 .gpiomask       = 0x03000F,
1148                 .muxsel         = MUXSEL(2, 3, 1, 1),
1149                 .gpiomux        = { 1, 0xd0001, 0, 0 },
1150                 .gpiomute       = 10,
1151                                 /* sound path (5 sources):
1152                                 MUX1 (mask 0x03), Enable Pin 0x08 (0=enable, 1=disable)
1153                                         0= ext. Audio IN
1154                                         1= from MUX2
1155                                         2= Mono TV sound from Tuner
1156                                         3= not connected
1157                                 MUX2 (mask 0x30000):
1158                                         0,2,3= from MSP34xx
1159                                         1= FM stereo Radio from Tuner */
1160                 .needs_tvaudio  = 0,
1161                 .pll            = PLL_28,
1162                 .tuner_type     = UNSET,
1163                 .tuner_addr     = ADDR_UNSET,
1164         },
1165         [BTTV_BOARD_TVIEW_RDS_FM] = {
1166                 /* Claas Langbehn <claas@bigfoot.com>,
1167                 Sven Grothklags <sven@upb.de> */
1168                 .name           = "Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS",
1169                 .video_inputs   = 4,
1170                 /* .audio_inputs= 3, */
1171                 .svhs           = 2,
1172                 .gpiomask       = 0x1c,
1173                 .muxsel         = MUXSEL(2, 3, 1, 1),
1174                 .gpiomux        = { 0, 0, 0x10, 8 },
1175                 .gpiomute       = 4,
1176                 .needs_tvaudio  = 1,
1177                 .pll            = PLL_28,
1178                 .tuner_type     = TUNER_PHILIPS_PAL,
1179                 .tuner_addr     = ADDR_UNSET,
1180                 .has_radio      = 1,
1181         },
1182         [BTTV_BOARD_LIFETEC_9415] = {
1183                 /* Tim Röstermundt <rosterm@uni-muenster.de>
1184                 in de.comp.os.unix.linux.hardware:
1185                         options bttv card=0 pll=1 radio=1 gpiomask=0x18e0
1186                         gpiomux =0x44c71f,0x44d71f,0,0x44d71f,0x44dfff
1187                         options tuner type=5 */
1188                 .name           = "Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90]",
1189                 .video_inputs   = 4,
1190                 /* .audio_inputs= 1, */
1191                 .svhs           = 2,
1192                 .gpiomask       = 0x18e0,
1193                 .muxsel         = MUXSEL(2, 3, 1, 1),
1194                 .gpiomux        = { 0x0000,0x0800,0x1000,0x1000 },
1195                 .gpiomute       = 0x18e0,
1196                         /* For cards with tda9820/tda9821:
1197                                 0x0000: Tuner normal stereo
1198                                 0x0080: Tuner A2 SAP (second audio program = Zweikanalton)
1199                                 0x0880: Tuner A2 stereo */
1200                 .pll            = PLL_28,
1201                 .tuner_type     = UNSET,
1202                 .tuner_addr     = ADDR_UNSET,
1203         },
1204         [BTTV_BOARD_BESTBUY_EASYTV] = {
1205                 /* Miguel Angel Alvarez <maacruz@navegalia.com>
1206                 old Easy TV BT848 version (model CPH031) */
1207                 .name           = "Askey CPH031/ BESTBUY Easy TV",
1208                 .video_inputs   = 4,
1209                 /* .audio_inputs= 1, */
1210                 .svhs           = 2,
1211                 .gpiomask       = 0xF,
1212                 .muxsel         = MUXSEL(2, 3, 1, 0),
1213                 .gpiomux        = { 2, 0, 0, 0 },
1214                 .gpiomute       = 10,
1215                 .needs_tvaudio  = 0,
1216                 .pll            = PLL_28,
1217                 .tuner_type     = TUNER_TEMIC_PAL,
1218                 .tuner_addr     = ADDR_UNSET,
1219         },
1220
1221         /* ---- card 0x38 ---------------------------------- */
1222         [BTTV_BOARD_FLYVIDEO_98FM] = {
1223                 /* Gordon Heydon <gjheydon@bigfoot.com ('98) */
1224                 .name           = "Lifeview FlyVideo 98FM LR50",
1225                 .video_inputs   = 4,
1226                 /* .audio_inputs= 3, */
1227                 .svhs           = 2,
1228                 .gpiomask       = 0x1800,
1229                 .muxsel         = MUXSEL(2, 3, 1, 1),
1230                 .gpiomux        = { 0, 0x800, 0x1000, 0x1000 },
1231                 .gpiomute       = 0x1800,
1232                 .pll            = PLL_28,
1233                 .tuner_type     = TUNER_PHILIPS_PAL,
1234                 .tuner_addr     = ADDR_UNSET,
1235         },
1236                 /* This is the ultimate cheapo capture card
1237                 * just a BT848A on a small PCB!
1238                 * Steve Hosgood <steve@equiinet.com> */
1239         [BTTV_BOARD_GRANDTEC] = {
1240                 .name           = "GrandTec 'Grand Video Capture' (Bt848)",
1241                 .video_inputs   = 2,
1242                 /* .audio_inputs= 0, */
1243                 .svhs           = 1,
1244                 .gpiomask       = 0,
1245                 .muxsel         = MUXSEL(3, 1),
1246                 .gpiomux        = { 0 },
1247                 .needs_tvaudio  = 0,
1248                 .no_msp34xx     = 1,
1249                 .pll            = PLL_35,
1250                 .tuner_type     = TUNER_ABSENT,
1251                 .tuner_addr     = ADDR_UNSET,
1252         },
1253         [BTTV_BOARD_ASKEY_CPH060] = {
1254                 /* Daniel Herrington <daniel.herrington@home.com> */
1255                 .name           = "Askey CPH060/ Phoebe TV Master Only (No FM)",
1256                 .video_inputs   = 3,
1257                 /* .audio_inputs= 1, */
1258                 .svhs           = 2,
1259                 .gpiomask       = 0xe00,
1260                 .muxsel         = MUXSEL(2, 3, 1, 1),
1261                 .gpiomux        = { 0x400, 0x400, 0x400, 0x400 },
1262                 .gpiomute       = 0x800,
1263                 .needs_tvaudio  = 1,
1264                 .pll            = PLL_28,
1265                 .tuner_type     = TUNER_TEMIC_4036FY5_NTSC,
1266                 .tuner_addr     = ADDR_UNSET,
1267         },
1268         [BTTV_BOARD_ASKEY_CPH03X] = {
1269                 /* Matti Mottus <mottus@physic.ut.ee> */
1270                 .name           = "Askey CPH03x TV Capturer",
1271                 .video_inputs   = 4,
1272                 /* .audio_inputs= 1, */
1273                 .svhs           = 2,
1274                 .gpiomask       = 0x03000F,
1275                 .muxsel         = MUXSEL(2, 3, 1, 0),
1276                 .gpiomux        = { 2, 0, 0, 0 },
1277                 .gpiomute       = 1,
1278                 .pll            = PLL_28,
1279                 .tuner_type     = TUNER_TEMIC_PAL,
1280                 .tuner_addr     = ADDR_UNSET,
1281                 .has_remote     = 1,
1282         },
1283
1284         /* ---- card 0x3c ---------------------------------- */
1285         [BTTV_BOARD_MM100PCTV] = {
1286                 /* Philip Blundell <philb@gnu.org> */
1287                 .name           = "Modular Technology MM100PCTV",
1288                 .video_inputs   = 2,
1289                 /* .audio_inputs= 2, */
1290                 .svhs           = NO_SVHS,
1291                 .gpiomask       = 11,
1292                 .muxsel         = MUXSEL(2, 3, 1, 1),
1293                 .gpiomux        = { 2, 0, 0, 1 },
1294                 .gpiomute       = 8,
1295                 .pll            = PLL_35,
1296                 .tuner_type     = TUNER_TEMIC_PAL,
1297                 .tuner_addr     = ADDR_UNSET,
1298         },
1299         [BTTV_BOARD_GMV1] = {
1300                 /* Adrian Cox <adrian@humboldt.co.uk */
1301                 .name           = "AG Electronics GMV1",
1302                 .video_inputs   = 2,
1303                 /* .audio_inputs= 0, */
1304                 .svhs           = 1,
1305                 .gpiomask       = 0xF,
1306                 .muxsel         = MUXSEL(2, 2),
1307                 .gpiomux        = { },
1308                 .no_msp34xx     = 1,
1309                 .needs_tvaudio  = 0,
1310                 .pll            = PLL_28,
1311                 .tuner_type     = TUNER_ABSENT,
1312                 .tuner_addr     = ADDR_UNSET,
1313         },
1314         [BTTV_BOARD_BESTBUY_EASYTV2] = {
1315                 /* Miguel Angel Alvarez <maacruz@navegalia.com>
1316                 new Easy TV BT878 version (model CPH061)
1317                 special thanks to Informatica Mieres for providing the card */
1318                 .name           = "Askey CPH061/ BESTBUY Easy TV (bt878)",
1319                 .video_inputs   = 3,
1320                 /* .audio_inputs= 2, */
1321                 .svhs           = 2,
1322                 .gpiomask       = 0xFF,
1323                 .muxsel         = MUXSEL(2, 3, 1, 0),
1324                 .gpiomux        = { 1, 0, 4, 4 },
1325                 .gpiomute       = 9,
1326                 .needs_tvaudio  = 0,
1327                 .pll            = PLL_28,
1328                 .tuner_type     = TUNER_PHILIPS_PAL,
1329                 .tuner_addr     = ADDR_UNSET,
1330         },
1331         [BTTV_BOARD_ATI_TVWONDER] = {
1332                 /* Lukas Gebauer <geby@volny.cz> */
1333                 .name           = "ATI TV-Wonder",
1334                 .video_inputs   = 3,
1335                 /* .audio_inputs= 1, */
1336                 .svhs           = 2,
1337                 .gpiomask       = 0xf03f,
1338                 .muxsel         = MUXSEL(2, 3, 1, 0),
1339                 .gpiomux        = { 0xbffe, 0, 0xbfff, 0 },
1340                 .gpiomute       = 0xbffe,
1341                 .pll            = PLL_28,
1342                 .tuner_type     = TUNER_TEMIC_4006FN5_MULTI_PAL,
1343                 .tuner_addr     = ADDR_UNSET,
1344         },
1345
1346         /* ---- card 0x40 ---------------------------------- */
1347         [BTTV_BOARD_ATI_TVWONDERVE] = {
1348                 /* Lukas Gebauer <geby@volny.cz> */
1349                 .name           = "ATI TV-Wonder VE",
1350                 .video_inputs   = 2,
1351                 /* .audio_inputs= 1, */
1352                 .svhs           = NO_SVHS,
1353                 .gpiomask       = 1,
1354                 .muxsel         = MUXSEL(2, 3, 0, 1),
1355                 .gpiomux        = { 0, 0, 1, 0 },
1356                 .no_msp34xx     = 1,
1357                 .pll            = PLL_28,
1358                 .tuner_type     = TUNER_TEMIC_4006FN5_MULTI_PAL,
1359                 .tuner_addr     = ADDR_UNSET,
1360         },
1361         [BTTV_BOARD_FLYVIDEO2000] = {
1362                 /* DeeJay <deejay@westel900.net (2000S) */
1363                 .name           = "Lifeview FlyVideo 2000S LR90",
1364                 .video_inputs   = 3,
1365                 /* .audio_inputs= 3, */
1366                 .svhs           = 2,
1367                 .gpiomask       = 0x18e0,
1368                 .muxsel         = MUXSEL(2, 3, 0, 1),
1369                                 /* Radio changed from 1e80 to 0x800 to make
1370                                 FlyVideo2000S in .hu happy (gm)*/
1371                                 /* -dk-???: set mute=0x1800 for tda9874h daughterboard */
1372                 .gpiomux        = { 0x0000,0x0800,0x1000,0x1000 },
1373                 .gpiomute       = 0x1800,
1374                 .audio_mode_gpio= fv2000s_audio,
1375                 .no_msp34xx     = 1,
1376                 .needs_tvaudio  = 1,
1377                 .pll            = PLL_28,
1378                 .tuner_type     = TUNER_PHILIPS_PAL,
1379                 .tuner_addr     = ADDR_UNSET,
1380         },
1381         [BTTV_BOARD_TERRATVALUER] = {
1382                 .name           = "Terratec TValueRadio",
1383                 .video_inputs   = 3,
1384                 /* .audio_inputs= 1, */
1385                 .svhs           = 2,
1386                 .gpiomask       = 0xffff00,
1387                 .muxsel         = MUXSEL(2, 3, 1, 1),
1388                 .gpiomux        = { 0x500, 0x500, 0x300, 0x900 },
1389                 .gpiomute       = 0x900,
1390                 .needs_tvaudio  = 1,
1391                 .pll            = PLL_28,
1392                 .tuner_type     = TUNER_PHILIPS_PAL,
1393                 .tuner_addr     = ADDR_UNSET,
1394                 .has_radio      = 1,
1395         },
1396         [BTTV_BOARD_GVBCTV4PCI] = {
1397                 /* TANAKA Kei <peg00625@nifty.com> */
1398                 .name           = "IODATA GV-BCTV4/PCI",
1399                 .video_inputs   = 3,
1400                 /* .audio_inputs= 1, */
1401                 .svhs           = 2,
1402                 .gpiomask       = 0x010f00,
1403                 .muxsel         = MUXSEL(2, 3, 0, 0),
1404                 .gpiomux        = {0x10000, 0, 0x10000, 0 },
1405                 .no_msp34xx     = 1,
1406                 .pll            = PLL_28,
1407                 .tuner_type     = TUNER_SHARP_2U5JF5540_NTSC,
1408                 .tuner_addr     = ADDR_UNSET,
1409                 .audio_mode_gpio= gvbctv3pci_audio,
1410         },
1411
1412         /* ---- card 0x44 ---------------------------------- */
1413         [BTTV_BOARD_VOODOOTV_FM] = {
1414                 .name           = "3Dfx VoodooTV FM (Euro)",
1415                 /* try "insmod msp3400 simple=0" if you have
1416                 * sound problems with this card. */
1417                 .video_inputs   = 4,
1418                 /* .audio_inputs= 1, */
1419                 .svhs           = NO_SVHS,
1420                 .gpiomask       = 0x4f8a00,
1421                 /* 0x100000: 1=MSP enabled (0=disable again)
1422                 * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
1423                 .gpiomux        = {0x947fff, 0x987fff,0x947fff,0x947fff },
1424                 .gpiomute       = 0x947fff,
1425                 /* tvtuner, radio,   external,internal, mute,  stereo
1426                 * tuner, Composit, SVid, Composit-on-Svid-adapter */
1427                 .muxsel         = MUXSEL(2, 3, 0, 1),
1428                 .tuner_type     = TUNER_MT2032,
1429                 .tuner_addr     = ADDR_UNSET,
1430                 .pll            = PLL_28,
1431                 .has_radio      = 1,
1432         },
1433         [BTTV_BOARD_VOODOOTV_200] = {
1434                 .name           = "VoodooTV 200 (USA)",
1435                 /* try "insmod msp3400 simple=0" if you have
1436                 * sound problems with this card. */
1437                 .video_inputs   = 4,
1438                 /* .audio_inputs= 1, */
1439                 .svhs           = NO_SVHS,
1440                 .gpiomask       = 0x4f8a00,
1441                 /* 0x100000: 1=MSP enabled (0=disable again)
1442                 * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
1443                 .gpiomux        = {0x947fff, 0x987fff,0x947fff,0x947fff },
1444                 .gpiomute       = 0x947fff,
1445                 /* tvtuner, radio,   external,internal, mute,  stereo
1446                 * tuner, Composit, SVid, Composit-on-Svid-adapter */
1447                 .muxsel         = MUXSEL(2, 3, 0, 1),
1448                 .tuner_type     = TUNER_MT2032,
1449                 .tuner_addr     = ADDR_UNSET,
1450                 .pll            = PLL_28,
1451                 .has_radio      = 1,
1452         },
1453         [BTTV_BOARD_AIMMS] = {
1454                 /* Philip Blundell <pb@nexus.co.uk> */
1455                 .name           = "Active Imaging AIMMS",
1456                 .video_inputs   = 1,
1457                 /* .audio_inputs= 0, */
1458                 .tuner_type     = TUNER_ABSENT,
1459                 .tuner_addr     = ADDR_UNSET,
1460                 .pll            = PLL_28,
1461                 .muxsel         = MUXSEL(2),
1462                 .gpiomask       = 0
1463         },
1464         [BTTV_BOARD_PV_BT878P_PLUS] = {
1465                 /* Tomasz Pyra <hellfire@sedez.iq.pl> */
1466                 .name           = "Prolink Pixelview PV-BT878P+ (Rev.4C,8E)",
1467                 .video_inputs   = 3,
1468                 /* .audio_inputs= 4, */
1469                 .svhs           = 2,
1470                 .gpiomask       = 15,
1471                 .muxsel         = MUXSEL(2, 3, 1, 1),
1472                 .gpiomux        = { 0, 0, 11, 7 }, /* TV and Radio with same GPIO ! */
1473                 .gpiomute       = 13,
1474                 .needs_tvaudio  = 1,
1475                 .pll            = PLL_28,
1476                 .tuner_type     = TUNER_LG_PAL_I_FM,
1477                 .tuner_addr     = ADDR_UNSET,
1478                 .has_remote     = 1,
1479                 /* GPIO wiring:
1480                         GPIO0: U4.A0 (hef4052bt)
1481                         GPIO1: U4.A1
1482                         GPIO2: U4.A1 (second hef4052bt)
1483                         GPIO3: U4.nEN, U5.A0, A5.nEN
1484                         GPIO8-15: vrd866b ?
1485                 */
1486         },
1487         [BTTV_BOARD_FLYVIDEO98EZ] = {
1488                 .name           = "Lifeview FlyVideo 98EZ (capture only) LR51",
1489                 .video_inputs   = 4,
1490                 /* .audio_inputs= 0, */
1491                 .svhs           = 2,
1492                 /* AV1, AV2, SVHS, CVid adapter on SVHS */
1493                 .muxsel         = MUXSEL(2, 3, 1, 1),
1494                 .pll            = PLL_28,
1495                 .no_msp34xx     = 1,
1496                 .tuner_type     = TUNER_ABSENT,
1497                 .tuner_addr     = ADDR_UNSET,
1498         },
1499
1500         /* ---- card 0x48 ---------------------------------- */
1501         [BTTV_BOARD_PV_BT878P_9B] = {
1502                 /* Dariusz Kowalewski <darekk@automex.pl> */
1503                 .name           = "Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM)",
1504                 .video_inputs   = 4,
1505                 /* .audio_inputs= 1, */
1506                 .svhs           = 2,
1507                 .gpiomask       = 0x3f,
1508                 .muxsel         = MUXSEL(2, 3, 1, 1),
1509                 .gpiomux        = { 0x01, 0x00, 0x03, 0x03 },
1510                 .gpiomute       = 0x09,
1511                 .needs_tvaudio  = 1,
1512                 .no_msp34xx     = 1,
1513                 .pll            = PLL_28,
1514                 .tuner_type     = TUNER_PHILIPS_PAL,
1515                 .tuner_addr     = ADDR_UNSET,
1516                 .audio_mode_gpio= pvbt878p9b_audio, /* Note: not all cards have stereo */
1517                 .has_radio      = 1,  /* Note: not all cards have radio */
1518                 .has_remote     = 1,
1519                 /* GPIO wiring:
1520                         GPIO0: A0 hef4052
1521                         GPIO1: A1 hef4052
1522                         GPIO3: nEN hef4052
1523                         GPIO8-15: vrd866b
1524                         GPIO20,22,23: R30,R29,R28
1525                 */
1526         },
1527         [BTTV_BOARD_SENSORAY311] = {
1528                 /* Clay Kunz <ckunz@mail.arc.nasa.gov> */
1529                 /* you must jumper JP5 for the card to work */
1530                 .name           = "Sensoray 311",
1531                 .video_inputs   = 5,
1532                 /* .audio_inputs= 0, */
1533                 .svhs           = 4,
1534                 .gpiomask       = 0,
1535                 .muxsel         = MUXSEL(2, 3, 1, 0, 0),
1536                 .gpiomux        = { 0 },
1537                 .needs_tvaudio  = 0,
1538                 .tuner_type     = TUNER_ABSENT,
1539                 .tuner_addr     = ADDR_UNSET,
1540         },
1541         [BTTV_BOARD_RV605] = {
1542                 /* Miguel Freitas <miguel@cetuc.puc-rio.br> */
1543                 .name           = "RemoteVision MX (RV605)",
1544                 .video_inputs   = 16,
1545                 /* .audio_inputs= 0, */
1546                 .svhs           = NO_SVHS,
1547                 .gpiomask       = 0x00,
1548                 .gpiomask2      = 0x07ff,
1549                 .muxsel         = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3),
1550                 .no_msp34xx     = 1,
1551                 .tuner_type     = TUNER_ABSENT,
1552                 .tuner_addr     = ADDR_UNSET,
1553                 .muxsel_hook    = rv605_muxsel,
1554         },
1555         [BTTV_BOARD_POWERCLR_MTV878] = {
1556                 .name           = "Powercolor MTV878/ MTV878R/ MTV878F",
1557                 .video_inputs   = 3,
1558                 /* .audio_inputs= 2, */
1559                 .svhs           = 2,
1560                 .gpiomask       = 0x1C800F,  /* Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset */
1561                 .muxsel         = MUXSEL(2, 1, 1),
1562                 .gpiomux        = { 0, 1, 2, 2 },
1563                 .gpiomute       = 4,
1564                 .needs_tvaudio  = 0,
1565                 .tuner_type     = TUNER_PHILIPS_PAL,
1566                 .tuner_addr     = ADDR_UNSET,
1567                 .pll            = PLL_28,
1568                 .has_radio      = 1,
1569         },
1570
1571         /* ---- card 0x4c ---------------------------------- */
1572         [BTTV_BOARD_WINDVR] = {
1573                 /* Masaki Suzuki <masaki@btree.org> */
1574                 .name           = "Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP)",
1575                 .video_inputs   = 3,
1576                 /* .audio_inputs= 1, */
1577                 .svhs           = 2,
1578                 .gpiomask       = 0x140007,
1579                 .muxsel         = MUXSEL(2, 3, 1, 1),
1580                 .gpiomux        = { 0, 1, 2, 3 },
1581                 .gpiomute       = 4,
1582                 .tuner_type     = TUNER_PHILIPS_NTSC,
1583                 .tuner_addr     = ADDR_UNSET,
1584                 .audio_mode_gpio= windvr_audio,
1585         },
1586         [BTTV_BOARD_GRANDTEC_MULTI] = {
1587                 .name           = "GrandTec Multi Capture Card (Bt878)",
1588                 .video_inputs   = 4,
1589                 /* .audio_inputs= 0, */
1590                 .svhs           = NO_SVHS,
1591                 .gpiomask       = 0,
1592                 .muxsel         = MUXSEL(2, 3, 1, 0),
1593                 .gpiomux        = { 0 },
1594                 .needs_tvaudio  = 0,
1595                 .no_msp34xx     = 1,
1596                 .pll            = PLL_28,
1597                 .tuner_type     = TUNER_ABSENT,
1598                 .tuner_addr     = ADDR_UNSET,
1599         },
1600         [BTTV_BOARD_KWORLD] = {
1601                 .name           = "Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF",
1602                 .video_inputs   = 4,
1603                 /* .audio_inputs= 3, */
1604                 .svhs           = 2,
1605                 .gpiomask       = 7,
1606                 /* Tuner, SVid, SVHS, SVid to SVHS connector */
1607                 .muxsel         = MUXSEL(2, 3, 1, 1),
1608                 .gpiomux        = { 0, 0, 4, 4 },/* Yes, this tuner uses the same audio output for TV and FM radio!
1609                                                 * This card lacks external Audio In, so we mute it on Ext. & Int.
1610                                                 * The PCB can take a sbx1637/sbx1673, wiring unknown.
1611                                                 * This card lacks PCI subsystem ID, sigh.
1612                                                 * gpiomux =1: lower volume, 2+3: mute
1613                                                 * btwincap uses 0x80000/0x80003
1614                                                 */
1615                 .gpiomute       = 4,
1616                 .needs_tvaudio  = 0,
1617                 .no_msp34xx     = 1,
1618                 .pll            = PLL_28,
1619                 .tuner_type     = TUNER_PHILIPS_PAL,
1620                 .tuner_addr     = ADDR_UNSET,
1621                 /* Samsung TCPA9095PC27A (BG+DK), philips compatible, w/FM, stereo and
1622                 radio signal strength indicators work fine. */
1623                 .has_radio      = 1,
1624                 /* GPIO Info:
1625                         GPIO0,1:   HEF4052 A0,A1
1626                         GPIO2:     HEF4052 nENABLE
1627                         GPIO3-7:   n.c.
1628                         GPIO8-13:  IRDC357 data0-5 (data6 n.c. ?) [chip not present on my card]
1629                         GPIO14,15: ??
1630                         GPIO16-21: n.c.
1631                         GPIO22,23: ??
1632                         ??       : mtu8b56ep microcontroller for IR (GPIO wiring unknown)*/
1633         },
1634         [BTTV_BOARD_DSP_TCVIDEO] = {
1635                 /* Arthur Tetzlaff-Deas, DSP Design Ltd <software@dspdesign.com> */
1636                 .name           = "DSP Design TCVIDEO",
1637                 .video_inputs   = 4,
1638                 .svhs           = NO_SVHS,
1639                 .muxsel         = MUXSEL(2, 3, 1, 0),
1640                 .pll            = PLL_28,
1641                 .tuner_type     = UNSET,
1642                 .tuner_addr     = ADDR_UNSET,
1643         },
1644
1645                 /* ---- card 0x50 ---------------------------------- */
1646         [BTTV_BOARD_HAUPPAUGEPVR] = {
1647                 .name           = "Hauppauge WinTV PVR",
1648                 .video_inputs   = 4,
1649                 /* .audio_inputs= 1, */
1650                 .svhs           = 2,
1651                 .muxsel         = MUXSEL(2, 0, 1, 1),
1652                 .needs_tvaudio  = 1,
1653                 .pll            = PLL_28,
1654                 .tuner_type     = UNSET,
1655                 .tuner_addr     = ADDR_UNSET,
1656
1657                 .gpiomask       = 7,
1658                 .gpiomux        = {7},
1659         },
1660         [BTTV_BOARD_GVBCTV5PCI] = {
1661                 .name           = "IODATA GV-BCTV5/PCI",
1662                 .video_inputs   = 3,
1663                 /* .audio_inputs= 1, */
1664                 .svhs           = 2,
1665                 .gpiomask       = 0x0f0f80,
1666                 .muxsel         = MUXSEL(2, 3, 1, 0),
1667                 .gpiomux        = {0x030000, 0x010000, 0, 0 },
1668                 .gpiomute       = 0x020000,
1669                 .no_msp34xx     = 1,
1670                 .pll            = PLL_28,
1671                 .tuner_type     = TUNER_PHILIPS_NTSC_M,
1672                 .tuner_addr     = ADDR_UNSET,
1673                 .audio_mode_gpio= gvbctv5pci_audio,
1674                 .has_radio      = 1,
1675         },
1676         [BTTV_BOARD_OSPREY1x0] = {
1677                 .name           = "Osprey 100/150 (878)", /* 0x1(2|3)-45C6-C1 */
1678                 .video_inputs   = 4,                  /* id-inputs-clock */
1679                 /* .audio_inputs= 0, */
1680                 .svhs           = 3,
1681                 .muxsel         = MUXSEL(3, 2, 0, 1),
1682                 .pll            = PLL_28,
1683                 .tuner_type     = TUNER_ABSENT,
1684                 .tuner_addr     = ADDR_UNSET,
1685                 .no_msp34xx     = 1,
1686                 .no_tda7432     = 1,
1687         },
1688         [BTTV_BOARD_OSPREY1x0_848] = {
1689                 .name           = "Osprey 100/150 (848)", /* 0x04-54C0-C1 & older boards */
1690                 .video_inputs   = 3,
1691                 /* .audio_inputs= 0, */
1692                 .svhs           = 2,
1693                 .muxsel         = MUXSEL(2, 3, 1),
1694                 .pll            = PLL_28,
1695                 .tuner_type     = TUNER_ABSENT,
1696                 .tuner_addr     = ADDR_UNSET,
1697                 .no_msp34xx     = 1,
1698                 .no_tda7432     = 1,
1699         },
1700
1701                 /* ---- card 0x54 ---------------------------------- */
1702         [BTTV_BOARD_OSPREY101_848] = {
1703                 .name           = "Osprey 101 (848)", /* 0x05-40C0-C1 */
1704                 .video_inputs   = 2,
1705                 /* .audio_inputs= 0, */
1706                 .svhs           = 1,
1707                 .muxsel         = MUXSEL(3, 1),
1708                 .pll            = PLL_28,
1709                 .tuner_type     = TUNER_ABSENT,
1710                 .tuner_addr     = ADDR_UNSET,
1711                 .no_msp34xx     = 1,
1712                 .no_tda7432     = 1,
1713         },
1714         [BTTV_BOARD_OSPREY1x1] = {
1715                 .name           = "Osprey 101/151",       /* 0x1(4|5)-0004-C4 */
1716                 .video_inputs   = 1,
1717                 /* .audio_inputs= 0, */
1718                 .svhs           = NO_SVHS,
1719                 .muxsel         = MUXSEL(0),
1720                 .pll            = PLL_28,
1721                 .tuner_type     = TUNER_ABSENT,
1722                 .tuner_addr     = ADDR_UNSET,
1723                 .no_msp34xx     = 1,
1724                 .no_tda7432     = 1,
1725         },
1726         [BTTV_BOARD_OSPREY1x1_SVID] = {
1727                 .name           = "Osprey 101/151 w/ svid",  /* 0x(16|17|20)-00C4-C1 */
1728                 .video_inputs   = 2,
1729                 /* .audio_inputs= 0, */
1730                 .svhs           = 1,
1731                 .muxsel         = MUXSEL(0, 1),
1732                 .pll            = PLL_28,
1733                 .tuner_type     = TUNER_ABSENT,
1734                 .tuner_addr     = ADDR_UNSET,
1735                 .no_msp34xx     = 1,
1736                 .no_tda7432     = 1,
1737         },
1738         [BTTV_BOARD_OSPREY2xx] = {
1739                 .name           = "Osprey 200/201/250/251",  /* 0x1(8|9|E|F)-0004-C4 */
1740                 .video_inputs   = 1,
1741                 /* .audio_inputs= 1, */
1742                 .svhs           = NO_SVHS,
1743                 .muxsel         = MUXSEL(0),
1744                 .pll            = PLL_28,
1745                 .tuner_type     = TUNER_ABSENT,
1746                 .tuner_addr     = ADDR_UNSET,
1747                 .no_msp34xx     = 1,
1748                 .no_tda7432     = 1,
1749         },
1750
1751                 /* ---- card 0x58 ---------------------------------- */
1752         [BTTV_BOARD_OSPREY2x0_SVID] = {
1753                 .name           = "Osprey 200/250",   /* 0x1(A|B)-00C4-C1 */
1754                 .video_inputs   = 2,
1755                 /* .audio_inputs= 1, */
1756                 .svhs           = 1,
1757                 .muxsel         = MUXSEL(0, 1),
1758                 .pll            = PLL_28,
1759                 .tuner_type     = TUNER_ABSENT,
1760                 .tuner_addr     = ADDR_UNSET,
1761                 .no_msp34xx     = 1,
1762                 .no_tda7432     = 1,
1763         },
1764         [BTTV_BOARD_OSPREY2x0] = {
1765                 .name           = "Osprey 210/220/230",   /* 0x1(A|B)-04C0-C1 */
1766                 .video_inputs   = 2,
1767                 /* .audio_inputs= 1, */
1768                 .svhs           = 1,
1769                 .muxsel         = MUXSEL(2, 3),
1770                 .pll            = PLL_28,
1771                 .tuner_type     = TUNER_ABSENT,
1772                 .tuner_addr     = ADDR_UNSET,
1773                 .no_msp34xx     = 1,
1774                 .no_tda7432     = 1,
1775         },
1776         [BTTV_BOARD_OSPREY500] = {
1777                 .name           = "Osprey 500",   /* 500 */
1778                 .video_inputs   = 2,
1779                 /* .audio_inputs= 1, */
1780                 .svhs           = 1,
1781                 .muxsel         = MUXSEL(2, 3),
1782                 .pll            = PLL_28,
1783                 .tuner_type     = TUNER_ABSENT,
1784                 .tuner_addr     = ADDR_UNSET,
1785                 .no_msp34xx     = 1,
1786                 .no_tda7432     = 1,
1787         },
1788         [BTTV_BOARD_OSPREY540] = {
1789                 .name           = "Osprey 540",   /* 540 */
1790                 .video_inputs   = 4,
1791                 /* .audio_inputs= 1, */
1792                 .pll            = PLL_28,
1793                 .tuner_type     = TUNER_ABSENT,
1794                 .tuner_addr     = ADDR_UNSET,
1795                 .no_msp34xx     = 1,
1796                 .no_tda7432     = 1,
1797         },
1798
1799                 /* ---- card 0x5C ---------------------------------- */
1800         [BTTV_BOARD_OSPREY2000] = {
1801                 .name           = "Osprey 2000",  /* 2000 */
1802                 .video_inputs   = 2,
1803                 /* .audio_inputs= 1, */
1804                 .svhs           = 1,
1805                 .muxsel         = MUXSEL(2, 3),
1806                 .pll            = PLL_28,
1807                 .tuner_type     = TUNER_ABSENT,
1808                 .tuner_addr     = ADDR_UNSET,
1809                 .no_msp34xx     = 1,
1810                 .no_tda7432     = 1,      /* must avoid, conflicts with the bt860 */
1811         },
1812         [BTTV_BOARD_IDS_EAGLE] = {
1813                 /* M G Berberich <berberic@forwiss.uni-passau.de> */
1814                 .name           = "IDS Eagle",
1815                 .video_inputs   = 4,
1816                 /* .audio_inputs= 0, */
1817                 .tuner_type     = TUNER_ABSENT,
1818                 .tuner_addr     = ADDR_UNSET,
1819                 .svhs           = NO_SVHS,
1820                 .gpiomask       = 0,
1821                 .muxsel         = MUXSEL(2, 2, 2, 2),
1822                 .muxsel_hook    = eagle_muxsel,
1823                 .no_msp34xx     = 1,
1824                 .pll            = PLL_28,
1825         },
1826         [BTTV_BOARD_PINNACLESAT] = {
1827                 .name           = "Pinnacle PCTV Sat",
1828                 .video_inputs   = 2,
1829                 /* .audio_inputs= 0, */
1830                 .svhs           = 1,
1831                 .tuner_type     = TUNER_ABSENT,
1832                 .tuner_addr     = ADDR_UNSET,
1833                 .no_msp34xx     = 1,
1834                 .no_tda7432     = 1,
1835                 .muxsel         = MUXSEL(3, 1),
1836                 .pll            = PLL_28,
1837                 .no_gpioirq     = 1,
1838                 .has_dvb        = 1,
1839         },
1840         [BTTV_BOARD_FORMAC_PROTV] = {
1841                 .name           = "Formac ProTV II (bt878)",
1842                 .video_inputs   = 4,
1843                 /* .audio_inputs= 1, */
1844                 .svhs           = 3,
1845                 .gpiomask       = 2,
1846                 /* TV, Comp1, Composite over SVID con, SVID */
1847                 .muxsel         = MUXSEL(2, 3, 1, 1),
1848                 .gpiomux        = { 2, 2, 0, 0 },
1849                 .pll            = PLL_28,
1850                 .has_radio      = 1,
1851                 .tuner_type     = TUNER_PHILIPS_PAL,
1852                 .tuner_addr     = ADDR_UNSET,
1853         /* sound routing:
1854                 GPIO=0x00,0x01,0x03: mute (?)
1855                 0x02: both TV and radio (tuner: FM1216/I)
1856                 The card has onboard audio connectors labeled "cdrom" and "board",
1857                 not soldered here, though unknown wiring.
1858                 Card lacks: external audio in, pci subsystem id.
1859         */
1860         },
1861
1862                 /* ---- card 0x60 ---------------------------------- */
1863         [BTTV_BOARD_MACHTV] = {
1864                 .name           = "MachTV",
1865                 .video_inputs   = 3,
1866                 /* .audio_inputs= 1, */
1867                 .svhs           = NO_SVHS,
1868                 .gpiomask       = 7,
1869                 .muxsel         = MUXSEL(2, 3, 1, 1),
1870                 .gpiomux        = { 0, 1, 2, 3},
1871                 .gpiomute       = 4,
1872                 .needs_tvaudio  = 1,
1873                 .tuner_type     = TUNER_PHILIPS_PAL,
1874                 .tuner_addr     = ADDR_UNSET,
1875                 .pll            = PLL_28,
1876         },
1877         [BTTV_BOARD_EURESYS_PICOLO] = {
1878                 .name           = "Euresys Picolo",
1879                 .video_inputs   = 3,
1880                 /* .audio_inputs= 0, */
1881                 .svhs           = 2,
1882                 .gpiomask       = 0,
1883                 .no_msp34xx     = 1,
1884                 .no_tda7432     = 1,
1885                 .muxsel         = MUXSEL(2, 0, 1),
1886                 .pll            = PLL_28,
1887                 .tuner_type     = TUNER_ABSENT,
1888                 .tuner_addr     = ADDR_UNSET,
1889         },
1890         [BTTV_BOARD_PV150] = {
1891                 /* Luc Van Hoeylandt <luc@e-magic.be> */
1892                 .name           = "ProVideo PV150", /* 0x4f */
1893                 .video_inputs   = 2,
1894                 /* .audio_inputs= 0, */
1895                 .svhs           = NO_SVHS,
1896                 .gpiomask       = 0,
1897                 .muxsel         = MUXSEL(2, 3),
1898                 .gpiomux        = { 0 },
1899                 .needs_tvaudio  = 0,
1900                 .no_msp34xx     = 1,
1901                 .pll            = PLL_28,
1902                 .tuner_type     = TUNER_ABSENT,
1903                 .tuner_addr     = ADDR_UNSET,
1904         },
1905         [BTTV_BOARD_AD_TVK503] = {
1906                 /* Hiroshi Takekawa <sian@big.or.jp> */
1907                 /* This card lacks subsystem ID */
1908                 .name           = "AD-TVK503", /* 0x63 */
1909                 .video_inputs   = 4,
1910                 /* .audio_inputs= 1, */
1911                 .svhs           = 2,
1912                 .gpiomask       = 0x001e8007,
1913                 .muxsel         = MUXSEL(2, 3, 1, 0),
1914                 /*                  Tuner, Radio, external, internal, off,  on */
1915                 .gpiomux        = { 0x08,  0x0f,  0x0a,     0x08 },
1916                 .gpiomute       = 0x0f,
1917                 .needs_tvaudio  = 0,
1918                 .no_msp34xx     = 1,
1919                 .pll            = PLL_28,
1920                 .tuner_type     = TUNER_PHILIPS_NTSC,
1921                 .tuner_addr     = ADDR_UNSET,
1922                 .audio_mode_gpio= adtvk503_audio,
1923         },
1924
1925                 /* ---- card 0x64 ---------------------------------- */
1926         [BTTV_BOARD_HERCULES_SM_TV] = {
1927                 .name           = "Hercules Smart TV Stereo",
1928                 .video_inputs   = 4,
1929                 /* .audio_inputs= 1, */
1930                 .svhs           = 2,
1931                 .gpiomask       = 0x00,
1932                 .muxsel         = MUXSEL(2, 3, 1, 1),
1933                 .needs_tvaudio  = 1,
1934                 .no_msp34xx     = 1,
1935                 .pll            = PLL_28,
1936                 .tuner_type     = TUNER_PHILIPS_PAL,
1937                 .tuner_addr     = ADDR_UNSET,
1938                 /* Notes:
1939                 - card lacks subsystem ID
1940                 - stereo variant w/ daughter board with tda9874a @0xb0
1941                 - Audio Routing:
1942                         always from tda9874 independent of GPIO (?)
1943                         external line in: unknown
1944                 - Other chips: em78p156elp @ 0x96 (probably IR remote control)
1945                         hef4053 (instead 4052) for unknown function
1946                 */
1947         },
1948         [BTTV_BOARD_PACETV] = {
1949                 .name           = "Pace TV & Radio Card",
1950                 .video_inputs   = 4,
1951                 /* .audio_inputs= 1, */
1952                 .svhs           = 2,
1953                 /* Tuner, CVid, SVid, CVid over SVid connector */
1954                 .muxsel         = MUXSEL(2, 3, 1, 1),
1955                 .gpiomask       = 0,
1956                 .no_tda7432     = 1,
1957                 .tuner_type     = TUNER_PHILIPS_PAL_I,
1958                 .tuner_addr     = ADDR_UNSET,
1959                 .has_radio      = 1,
1960                 .pll            = PLL_28,
1961                 /* Bt878, Bt832, FI1246 tuner; no pci subsystem id
1962                 only internal line out: (4pin header) RGGL
1963                 Radio must be decoded by msp3410d (not routed through)*/
1964                 /*
1965                 .digital_mode   = DIGITAL_MODE_CAMERA,  todo!
1966                 */
1967         },
1968         [BTTV_BOARD_IVC200] = {
1969                 /* Chris Willing <chris@vislab.usyd.edu.au> */
1970                 .name           = "IVC-200",
1971                 .video_inputs   = 1,
1972                 /* .audio_inputs= 0, */
1973                 .tuner_type     = TUNER_ABSENT,
1974                 .tuner_addr     = ADDR_UNSET,
1975                 .svhs           = NO_SVHS,
1976                 .gpiomask       = 0xdf,
1977                 .muxsel         = MUXSEL(2),
1978                 .pll            = PLL_28,
1979         },
1980         [BTTV_BOARD_IVCE8784] = {
1981                 .name           = "IVCE-8784",
1982                 .video_inputs   = 1,
1983                 /* .audio_inputs= 0, */
1984                 .tuner_type     = TUNER_ABSENT,
1985                 .tuner_addr     = ADDR_UNSET,
1986                 .svhs           = NO_SVHS,
1987                 .gpiomask       = 0xdf,
1988                 .muxsel         = MUXSEL(2),
1989                 .pll            = PLL_28,
1990         },
1991         [BTTV_BOARD_XGUARD] = {
1992                 .name           = "Grand X-Guard / Trust 814PCI",
1993                 .video_inputs   = 16,
1994                 /* .audio_inputs= 0, */
1995                 .svhs           = NO_SVHS,
1996                 .tuner_type     = TUNER_ABSENT,
1997                 .tuner_addr     = ADDR_UNSET,
1998                 .gpiomask2      = 0xff,
1999                 .muxsel         = MUXSEL(2,2,2,2, 3,3,3,3, 1,1,1,1, 0,0,0,0),
2000                 .muxsel_hook    = xguard_muxsel,
2001                 .no_msp34xx     = 1,
2002                 .no_tda7432     = 1,
2003                 .pll            = PLL_28,
2004         },
2005
2006                 /* ---- card 0x68 ---------------------------------- */
2007         [BTTV_BOARD_NEBULA_DIGITV] = {
2008                 .name           = "Nebula Electronics DigiTV",
2009                 .video_inputs   = 1,
2010                 .svhs           = NO_SVHS,
2011                 .muxsel         = MUXSEL(2, 3, 1, 0),
2012                 .no_msp34xx     = 1,
2013                 .no_tda7432     = 1,
2014                 .pll            = PLL_28,
2015                 .tuner_type     = TUNER_ABSENT,
2016                 .tuner_addr     = ADDR_UNSET,
2017                 .has_dvb        = 1,
2018                 .has_remote     = 1,
2019                 .gpiomask       = 0x1b,
2020                 .no_gpioirq     = 1,
2021         },
2022         [BTTV_BOARD_PV143] = {
2023                 /* Jorge Boncompte - DTI2 <jorge@dti2.net> */
2024                 .name           = "ProVideo PV143",
2025                 .video_inputs   = 4,
2026                 /* .audio_inputs= 0, */
2027                 .svhs           = NO_SVHS,
2028                 .gpiomask       = 0,
2029                 .muxsel         = MUXSEL(2, 3, 1, 0),
2030                 .gpiomux        = { 0 },
2031                 .needs_tvaudio  = 0,
2032                 .no_msp34xx     = 1,
2033                 .pll            = PLL_28,
2034                 .tuner_type     = TUNER_ABSENT,
2035                 .tuner_addr     = ADDR_UNSET,
2036         },
2037         [BTTV_BOARD_VD009X1_VD011_MINIDIN] = {
2038                 /* M.Klahr@phytec.de */
2039                 .name           = "PHYTEC VD-009-X1 VD-011 MiniDIN (bt878)",
2040                 .video_inputs   = 4,
2041                 /* .audio_inputs= 0, */
2042                 .svhs           = 3,
2043                 .gpiomask       = 0x00,
2044                 .muxsel         = MUXSEL(2, 3, 1, 0),
2045                 .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2046                 .needs_tvaudio  = 0,
2047                 .pll            = PLL_28,
2048                 .tuner_type     = TUNER_ABSENT,
2049                 .tuner_addr     = ADDR_UNSET,
2050         },
2051         [BTTV_BOARD_VD009X1_VD011_COMBI] = {
2052                 .name           = "PHYTEC VD-009-X1 VD-011 Combi (bt878)",
2053                 .video_inputs   = 4,
2054                 /* .audio_inputs= 0, */
2055                 .svhs           = 3,
2056                 .gpiomask       = 0x00,
2057                 .muxsel         = MUXSEL(2, 3, 1, 1),
2058                 .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2059                 .needs_tvaudio  = 0,
2060                 .pll            = PLL_28,
2061                 .tuner_type     = TUNER_ABSENT,
2062                 .tuner_addr     = ADDR_UNSET,
2063         },
2064
2065                 /* ---- card 0x6c ---------------------------------- */
2066         [BTTV_BOARD_VD009_MINIDIN] = {
2067                 .name           = "PHYTEC VD-009 MiniDIN (bt878)",
2068                 .video_inputs   = 10,
2069                 /* .audio_inputs= 0, */
2070                 .svhs           = 9,
2071                 .gpiomask       = 0x00,
2072                 .gpiomask2      = 0x03, /* used for external vodeo mux */
2073                 .muxsel         = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 0),
2074                 .muxsel_hook    = phytec_muxsel,
2075                 .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2076                 .needs_tvaudio  = 1,
2077                 .pll            = PLL_28,
2078                 .tuner_type     = TUNER_ABSENT,
2079                 .tuner_addr     = ADDR_UNSET,
2080         },
2081         [BTTV_BOARD_VD009_COMBI] = {
2082                 .name           = "PHYTEC VD-009 Combi (bt878)",
2083                 .video_inputs   = 10,
2084                 /* .audio_inputs= 0, */
2085                 .svhs           = 9,
2086                 .gpiomask       = 0x00,
2087                 .gpiomask2      = 0x03, /* used for external vodeo mux */
2088                 .muxsel         = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1),
2089                 .muxsel_hook    = phytec_muxsel,
2090                 .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2091                 .needs_tvaudio  = 1,
2092                 .pll            = PLL_28,
2093                 .tuner_type     = TUNER_ABSENT,
2094                 .tuner_addr     = ADDR_UNSET,
2095         },
2096         [BTTV_BOARD_IVC100] = {
2097                 .name           = "IVC-100",
2098                 .video_inputs   = 4,
2099                 /* .audio_inputs= 0, */
2100                 .tuner_type     = TUNER_ABSENT,
2101                 .tuner_addr     = ADDR_UNSET,
2102                 .svhs           = NO_SVHS,
2103                 .gpiomask       = 0xdf,
2104                 .muxsel         = MUXSEL(2, 3, 1, 0),
2105                 .pll            = PLL_28,
2106         },
2107         [BTTV_BOARD_IVC120] = {
2108                 /* IVC-120G - Alan Garfield <alan@fromorbit.com> */
2109                 .name           = "IVC-120G",
2110                 .video_inputs   = 16,
2111                 /* .audio_inputs= 0, */
2112                 .tuner_type     = TUNER_ABSENT,
2113                 .tuner_addr     = ADDR_UNSET,
2114                 .svhs           = NO_SVHS,   /* card has no svhs */
2115                 .needs_tvaudio  = 0,
2116                 .no_msp34xx     = 1,
2117                 .no_tda7432     = 1,
2118                 .gpiomask       = 0x00,
2119                 .muxsel         = MUXSEL(0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0),
2120                 .muxsel_hook    = ivc120_muxsel,
2121                 .pll            = PLL_28,
2122         },
2123
2124                 /* ---- card 0x70 ---------------------------------- */
2125         [BTTV_BOARD_PC_HDTV] = {
2126                 .name           = "pcHDTV HD-2000 TV",
2127                 .video_inputs   = 4,
2128                 /* .audio_inputs= 1, */
2129                 .svhs           = 2,
2130                 .muxsel         = MUXSEL(2, 3, 1, 0),
2131                 .tuner_type     = TUNER_PHILIPS_FCV1236D,
2132                 .tuner_addr     = ADDR_UNSET,
2133                 .has_dvb        = 1,
2134         },
2135         [BTTV_BOARD_TWINHAN_DST] = {
2136                 .name           = "Twinhan DST + clones",
2137                 .no_msp34xx     = 1,
2138                 .no_tda7432     = 1,
2139                 .tuner_type     = TUNER_ABSENT,
2140                 .tuner_addr     = ADDR_UNSET,
2141                 .no_video       = 1,
2142                 .has_dvb        = 1,
2143         },
2144         [BTTV_BOARD_WINFASTVC100] = {
2145                 .name           = "Winfast VC100",
2146                 .video_inputs   = 3,
2147                 /* .audio_inputs= 0, */
2148                 .svhs           = 1,
2149                 /* Vid In, SVid In, Vid over SVid in connector */
2150                 .muxsel         = MUXSEL(3, 1, 1, 3),
2151                 .no_msp34xx     = 1,
2152                 .no_tda7432     = 1,
2153                 .tuner_type     = TUNER_ABSENT,
2154                 .tuner_addr     = ADDR_UNSET,
2155                 .pll            = PLL_28,
2156         },
2157         [BTTV_BOARD_TEV560] = {
2158                 .name           = "Teppro TEV-560/InterVision IV-560",
2159                 .video_inputs   = 3,
2160                 /* .audio_inputs= 1, */
2161                 .svhs           = 2,
2162                 .gpiomask       = 3,
2163                 .muxsel         = MUXSEL(2, 3, 1, 1),
2164                 .gpiomux        = { 1, 1, 1, 1 },
2165                 .needs_tvaudio  = 1,
2166                 .tuner_type     = TUNER_PHILIPS_PAL,
2167                 .tuner_addr     = ADDR_UNSET,
2168                 .pll            = PLL_35,
2169         },
2170
2171                 /* ---- card 0x74 ---------------------------------- */
2172         [BTTV_BOARD_SIMUS_GVC1100] = {
2173                 .name           = "SIMUS GVC1100",
2174                 .video_inputs   = 4,
2175                 /* .audio_inputs= 0, */
2176                 .svhs           = NO_SVHS,
2177                 .tuner_type     = TUNER_ABSENT,
2178                 .tuner_addr     = ADDR_UNSET,
2179                 .pll            = PLL_28,
2180                 .muxsel         = MUXSEL(2, 2, 2, 2),
2181                 .gpiomask       = 0x3F,
2182                 .muxsel_hook    = gvc1100_muxsel,
2183         },
2184         [BTTV_BOARD_NGSTV_PLUS] = {
2185                 /* Carlos Silva r3pek@r3pek.homelinux.org || card 0x75 */
2186                 .name           = "NGS NGSTV+",
2187                 .video_inputs   = 3,
2188                 .svhs           = 2,
2189                 .gpiomask       = 0x008007,
2190                 .muxsel         = MUXSEL(2, 3, 0, 0),
2191                 .gpiomux        = { 0, 0, 0, 0 },
2192                 .gpiomute       = 0x000003,
2193                 .pll            = PLL_28,
2194                 .tuner_type     = TUNER_PHILIPS_PAL,
2195                 .tuner_addr     = ADDR_UNSET,
2196                 .has_remote     = 1,
2197         },
2198         [BTTV_BOARD_LMLBT4] = {
2199                 /* http://linuxmedialabs.com */
2200                 .name           = "LMLBT4",
2201                 .video_inputs   = 4, /* IN1,IN2,IN3,IN4 */
2202                 /* .audio_inputs= 0, */
2203                 .svhs           = NO_SVHS,
2204                 .muxsel         = MUXSEL(2, 3, 1, 0),
2205                 .no_msp34xx     = 1,
2206                 .no_tda7432     = 1,
2207                 .needs_tvaudio  = 0,
2208                 .tuner_type     = TUNER_ABSENT,
2209                 .tuner_addr     = ADDR_UNSET,
2210         },
2211         [BTTV_BOARD_TEKRAM_M205] = {
2212                 /* Helmroos Harri <harri.helmroos@pp.inet.fi> */
2213                 .name           = "Tekram M205 PRO",
2214                 .video_inputs   = 3,
2215                 /* .audio_inputs= 1, */
2216                 .tuner_type     = TUNER_PHILIPS_PAL,
2217                 .tuner_addr     = ADDR_UNSET,
2218                 .svhs           = 2,
2219                 .needs_tvaudio  = 0,
2220                 .gpiomask       = 0x68,
2221                 .muxsel         = MUXSEL(2, 3, 1),
2222                 .gpiomux        = { 0x68, 0x68, 0x61, 0x61 },
2223                 .pll            = PLL_28,
2224         },
2225
2226                 /* ---- card 0x78 ---------------------------------- */
2227         [BTTV_BOARD_CONTVFMI] = {
2228                 /* Javier Cendan Ares <jcendan@lycos.es> */
2229                 /* bt878 TV + FM without subsystem ID */
2230                 .name           = "Conceptronic CONTVFMi",
2231                 .video_inputs   = 3,
2232                 /* .audio_inputs= 1, */
2233                 .svhs           = 2,
2234                 .gpiomask       = 0x008007,
2235                 .muxsel         = MUXSEL(2, 3, 1, 1),
2236                 .gpiomux        = { 0, 1, 2, 2 },
2237                 .gpiomute       = 3,
2238                 .needs_tvaudio  = 0,
2239                 .pll            = PLL_28,
2240                 .tuner_type     = TUNER_PHILIPS_PAL,
2241                 .tuner_addr     = ADDR_UNSET,
2242                 .has_remote     = 1,
2243                 .has_radio      = 1,
2244         },
2245         [BTTV_BOARD_PICOLO_TETRA_CHIP] = {
2246                 /*Eric DEBIEF <debief@telemsa.com>*/
2247                 /*EURESYS Picolo Tetra : 4 Conexant Fusion 878A, no audio, video input set with analog multiplexers GPIO controled*/
2248                 /* adds picolo_tetra_muxsel(), picolo_tetra_init(), the folowing declaration strucure, and #define BTTV_BOARD_PICOLO_TETRA_CHIP*/
2249                 /*0x79 in bttv.h*/
2250                 .name           = "Euresys Picolo Tetra",
2251                 .video_inputs   = 4,
2252                 /* .audio_inputs= 0, */
2253                 .svhs           = NO_SVHS,
2254                 .gpiomask       = 0,
2255                 .gpiomask2      = 0x3C<<16,/*Set the GPIO[18]->GPIO[21] as output pin.==> drive the video inputs through analog multiplexers*/
2256                 .no_msp34xx     = 1,
2257                 .no_tda7432     = 1,
2258                 /*878A input is always MUX0, see above.*/
2259                 .muxsel         = MUXSEL(2, 2, 2, 2),
2260                 .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2261                 .pll            = PLL_28,
2262                 .needs_tvaudio  = 0,
2263                 .muxsel_hook    = picolo_tetra_muxsel,/*Required as it doesn't follow the classic input selection policy*/
2264                 .tuner_type     = TUNER_ABSENT,
2265                 .tuner_addr     = ADDR_UNSET,
2266         },
2267         [BTTV_BOARD_SPIRIT_TV] = {
2268                 /* Spirit TV Tuner from http://spiritmodems.com.au */
2269                 /* Stafford Goodsell <surge@goliath.homeunix.org> */
2270                 .name           = "Spirit TV Tuner",
2271                 .video_inputs   = 3,
2272                 /* .audio_inputs= 1, */
2273                 .svhs           = 2,
2274                 .gpiomask       = 0x0000000f,
2275                 .muxsel         = MUXSEL(2, 1, 1),
2276                 .gpiomux        = { 0x02, 0x00, 0x00, 0x00 },
2277                 .tuner_type     = TUNER_TEMIC_PAL,
2278                 .tuner_addr     = ADDR_UNSET,
2279                 .no_msp34xx     = 1,
2280         },
2281         [BTTV_BOARD_AVDVBT_771] = {
2282                 /* Wolfram Joost <wojo@frokaschwei.de> */
2283                 .name           = "AVerMedia AVerTV DVB-T 771",
2284                 .video_inputs   = 2,
2285                 .svhs           = 1,
2286                 .tuner_type     = TUNER_ABSENT,
2287                 .tuner_addr     = ADDR_UNSET,
2288                 .muxsel         = MUXSEL(3, 3),
2289                 .no_msp34xx     = 1,
2290                 .no_tda7432     = 1,
2291                 .pll            = PLL_28,
2292                 .has_dvb        = 1,
2293                 .no_gpioirq     = 1,
2294                 .has_remote     = 1,
2295         },
2296                 /* ---- card 0x7c ---------------------------------- */
2297         [BTTV_BOARD_AVDVBT_761] = {
2298                 /* Matt Jesson <dvb@jesson.eclipse.co.uk> */
2299                 /* Based on the Nebula card data - added remote and new card number - BTTV_BOARD_AVDVBT_761, see also ir-kbd-gpio.c */
2300                 .name           = "AverMedia AverTV DVB-T 761",
2301                 .video_inputs   = 2,
2302                 .svhs           = 1,
2303                 .muxsel         = MUXSEL(3, 1, 2, 0), /* Comp0, S-Video, ?, ? */
2304                 .no_msp34xx     = 1,
2305                 .no_tda7432     = 1,
2306                 .pll            = PLL_28,
2307                 .tuner_type     = TUNER_ABSENT,
2308                 .tuner_addr     = ADDR_UNSET,
2309                 .has_dvb        = 1,
2310                 .no_gpioirq     = 1,
2311                 .has_remote     = 1,
2312         },
2313         [BTTV_BOARD_MATRIX_VISIONSQ] = {
2314                 /* andre.schwarz@matrix-vision.de */
2315                 .name           = "MATRIX Vision Sigma-SQ",
2316                 .video_inputs   = 16,
2317                 /* .audio_inputs= 0, */
2318                 .svhs           = NO_SVHS,
2319                 .gpiomask       = 0x0,
2320                 .muxsel         = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3),
2321                 .muxsel_hook    = sigmaSQ_muxsel,
2322                 .gpiomux        = { 0 },
2323                 .no_msp34xx     = 1,
2324                 .pll            = PLL_28,
2325                 .tuner_type     = TUNER_ABSENT,
2326                 .tuner_addr     = ADDR_UNSET,
2327         },
2328         [BTTV_BOARD_MATRIX_VISIONSLC] = {
2329                 /* andre.schwarz@matrix-vision.de */
2330                 .name           = "MATRIX Vision Sigma-SLC",
2331                 .video_inputs   = 4,
2332                 /* .audio_inputs= 0, */
2333                 .svhs           = NO_SVHS,
2334                 .gpiomask       = 0x0,
2335                 .muxsel         = MUXSEL(2, 2, 2, 2),
2336                 .muxsel_hook    = sigmaSLC_muxsel,
2337                 .gpiomux        = { 0 },
2338                 .no_msp34xx     = 1,
2339                 .pll            = PLL_28,
2340                 .tuner_type     = TUNER_ABSENT,
2341                 .tuner_addr     = ADDR_UNSET,
2342         },
2343                 /* BTTV_BOARD_APAC_VIEWCOMP */
2344         [BTTV_BOARD_APAC_VIEWCOMP] = {
2345                 /* Attila Kondoros <attila.kondoros@chello.hu> */
2346                 /* bt878 TV + FM 0x00000000 subsystem ID */
2347                 .name           = "APAC Viewcomp 878(AMAX)",
2348                 .video_inputs   = 2,
2349                 /* .audio_inputs= 1, */
2350                 .svhs           = NO_SVHS,
2351                 .gpiomask       = 0xFF,
2352                 .muxsel         = MUXSEL(2, 3, 1, 1),
2353                 .gpiomux        = { 2, 0, 0, 0 },
2354                 .gpiomute       = 10,
2355                 .needs_tvaudio  = 0,
2356                 .pll            = PLL_28,
2357                 .tuner_type     = TUNER_PHILIPS_PAL,
2358                 .tuner_addr     = ADDR_UNSET,
2359                 .has_remote     = 1,   /* miniremote works, see ir-kbd-gpio.c */
2360                 .has_radio      = 1,   /* not every card has radio */
2361         },
2362
2363                 /* ---- card 0x80 ---------------------------------- */
2364         [BTTV_BOARD_DVICO_DVBT_LITE] = {
2365                 /* Chris Pascoe <c.pascoe@itee.uq.edu.au> */
2366                 .name           = "DViCO FusionHDTV DVB-T Lite",
2367                 .no_msp34xx     = 1,
2368                 .no_tda7432     = 1,
2369                 .pll            = PLL_28,
2370                 .no_video       = 1,
2371                 .has_dvb        = 1,
2372                 .tuner_type     = TUNER_ABSENT,
2373                 .tuner_addr     = ADDR_UNSET,
2374         },
2375         [BTTV_BOARD_VGEAR_MYVCD] = {
2376                 /* Steven <photon38@pchome.com.tw> */
2377                 .name           = "V-Gear MyVCD",
2378                 .video_inputs   = 3,
2379                 /* .audio_inputs= 1, */
2380                 .svhs           = 2,
2381                 .gpiomask       = 0x3f,
2382                 .muxsel         = MUXSEL(2, 3, 1, 0),
2383                 .gpiomux        = {0x31, 0x31, 0x31, 0x31 },
2384                 .gpiomute       = 0x31,
2385                 .no_msp34xx     = 1,
2386                 .pll            = PLL_28,
2387                 .tuner_type     = TUNER_PHILIPS_NTSC_M,
2388                 .tuner_addr     = ADDR_UNSET,
2389                 .has_radio      = 0,
2390         },
2391         [BTTV_BOARD_SUPER_TV] = {
2392                 /* Rick C <cryptdragoon@gmail.com> */
2393                 .name           = "Super TV Tuner",
2394                 .video_inputs   = 4,
2395                 /* .audio_inputs= 1, */
2396                 .svhs           = 2,
2397                 .muxsel         = MUXSEL(2, 3, 1, 0),
2398                 .tuner_type     = TUNER_PHILIPS_NTSC,
2399                 .tuner_addr     = ADDR_UNSET,
2400                 .gpiomask       = 0x008007,
2401                 .gpiomux        = { 0, 0x000001,0,0 },
2402                 .needs_tvaudio  = 1,
2403                 .has_radio      = 1,
2404         },
2405         [BTTV_BOARD_TIBET_CS16] = {
2406                 /* Chris Fanning <video4linux@haydon.net> */
2407                 .name           = "Tibet Systems 'Progress DVR' CS16",
2408                 .video_inputs   = 16,
2409                 /* .audio_inputs= 0, */
2410                 .svhs           = NO_SVHS,
2411                 .muxsel         = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2),
2412                 .pll            = PLL_28,
2413                 .no_msp34xx     = 1,
2414                 .no_tda7432     = 1,
2415                 .tuner_type     = TUNER_ABSENT,
2416                 .tuner_addr     = ADDR_UNSET,
2417                 .muxsel_hook    = tibetCS16_muxsel,
2418         },
2419         [BTTV_BOARD_KODICOM_4400R] = {
2420                 /* Bill Brack <wbrack@mmm.com.hk> */
2421                 /*
2422                 * Note that, because of the card's wiring, the "master"
2423                 * BT878A chip (i.e. the one which controls the analog switch
2424                 * and must use this card type) is the 2nd one detected.  The
2425                 * other 3 chips should use card type 0x85, whose description
2426                 * follows this one.  There is a EEPROM on the card (which is
2427                 * connected to the I2C of one of those other chips), but is
2428                 * not currently handled.  There is also a facility for a
2429                 * "monitor", which is also not currently implemented.
2430                 */
2431                 .name           = "Kodicom 4400R (master)",
2432                 .video_inputs   = 16,
2433                 /* .audio_inputs= 0, */
2434                 .tuner_type     = TUNER_ABSENT,
2435                 .tuner_addr     = ADDR_UNSET,
2436                 .svhs           = NO_SVHS,
2437                 /* GPIO bits 0-9 used for analog switch:
2438                 *   00 - 03:    camera selector
2439                 *   04 - 06:    channel (controller) selector
2440                 *   07: data (1->on, 0->off)
2441                 *   08: strobe
2442                 *   09: reset
2443                 * bit 16 is input from sync separator for the channel
2444                 */
2445                 .gpiomask       = 0x0003ff,
2446                 .no_gpioirq     = 1,
2447                 .muxsel         = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3),
2448                 .pll            = PLL_28,
2449                 .no_msp34xx     = 1,
2450                 .no_tda7432     = 1,
2451                 .muxsel_hook    = kodicom4400r_muxsel,
2452         },
2453         [BTTV_BOARD_KODICOM_4400R_SL] = {
2454                 /* Bill Brack <wbrack@mmm.com.hk> */
2455                 /* Note that, for reasons unknown, the "master" BT878A chip (i.e. the
2456                 * one which controls the analog switch, and must use the card type)
2457                 * is the 2nd one detected.  The other 3 chips should use this card
2458                 * type
2459                 */
2460                 .name           = "Kodicom 4400R (slave)",
2461                 .video_inputs   = 16,
2462                 /* .audio_inputs= 0, */
2463                 .tuner_type     = TUNER_ABSENT,
2464                 .tuner_addr     = ADDR_UNSET,
2465                 .svhs           = NO_SVHS,
2466                 .gpiomask       = 0x010000,
2467                 .no_gpioirq     = 1,
2468                 .muxsel         = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3),
2469                 .pll            = PLL_28,
2470                 .no_msp34xx     = 1,
2471                 .no_tda7432     = 1,
2472                 .muxsel_hook    = kodicom4400r_muxsel,
2473         },
2474                 /* ---- card 0x86---------------------------------- */
2475         [BTTV_BOARD_ADLINK_RTV24] = {
2476                 /* Michael Henson <mhenson@clarityvi.com> */
2477                 /* Adlink RTV24 with special unlock codes */
2478                 .name           = "Adlink RTV24",
2479                 .video_inputs   = 4,
2480                 /* .audio_inputs= 1, */
2481                 .svhs           = 2,
2482                 .muxsel         = MUXSEL(2, 3, 1, 0),
2483                 .tuner_type     = UNSET,
2484                 .tuner_addr     = ADDR_UNSET,
2485                 .pll            = PLL_28,
2486         },
2487                 /* ---- card 0x87---------------------------------- */
2488         [BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE] = {
2489                 /* Michael Krufky <mkrufky@m1k.net> */
2490                 .name           = "DViCO FusionHDTV 5 Lite",
2491                 .tuner_type     = TUNER_LG_TDVS_H06XF, /* TDVS-H064F */
2492                 .tuner_addr     = ADDR_UNSET,
2493                 .video_inputs   = 3,
2494                 /* .audio_inputs= 1, */
2495                 .svhs           = 2,
2496                 .muxsel         = MUXSEL(2, 3, 1),
2497                 .gpiomask       = 0x00e00007,
2498                 .gpiomux        = { 0x00400005, 0, 0x00000001, 0 },
2499                 .gpiomute       = 0x00c00007,
2500                 .no_msp34xx     = 1,
2501                 .no_tda7432     = 1,
2502                 .has_dvb        = 1,
2503         },
2504                 /* ---- card 0x88---------------------------------- */
2505         [BTTV_BOARD_ACORP_Y878F] = {
2506                 /* Mauro Carvalho Chehab <mchehab@infradead.org> */
2507                 .name           = "Acorp Y878F",
2508                 .video_inputs   = 3,
2509                 /* .audio_inputs= 1, */
2510                 .svhs           = 2,
2511                 .gpiomask       = 0x01fe00,
2512                 .muxsel         = MUXSEL(2, 3, 1, 1),
2513                 .gpiomux        = { 0x001e00, 0, 0x018000, 0x014000 },
2514                 .gpiomute       = 0x002000,
2515                 .needs_tvaudio  = 1,
2516                 .pll            = PLL_28,
2517                 .tuner_type     = TUNER_YMEC_TVF66T5_B_DFF,
2518                 .tuner_addr     = 0xc1 >>1,
2519                 .has_radio      = 1,
2520         },
2521                 /* ---- card 0x89 ---------------------------------- */
2522         [BTTV_BOARD_CONCEPTRONIC_CTVFMI2] = {
2523                 .name           = "Conceptronic CTVFMi v2",
2524                 .video_inputs   = 3,
2525                 /* .audio_inputs= 1, */
2526                 .svhs           = 2,
2527                 .gpiomask       = 0x001c0007,
2528                 .muxsel         = MUXSEL(2, 3, 1, 1),
2529                 .gpiomux        = { 0, 1, 2, 2 },
2530                 .gpiomute       = 3,
2531                 .needs_tvaudio  = 0,
2532                 .pll            = PLL_28,
2533                 .tuner_type     = TUNER_TENA_9533_DI,
2534                 .tuner_addr     = ADDR_UNSET,
2535                 .has_remote     = 1,
2536                 .has_radio      = 1,
2537         },
2538                 /* ---- card 0x8a ---------------------------------- */
2539         [BTTV_BOARD_PV_BT878P_2E] = {
2540                 .name           = "Prolink Pixelview PV-BT878P+ (Rev.2E)",
2541                 .video_inputs   = 5,
2542                 /* .audio_inputs= 1, */
2543                 .svhs           = 3,
2544                 .has_dig_in     = 1,
2545                 .gpiomask       = 0x01fe00,
2546                 .muxsel         = MUXSEL(2, 3, 1, 1, 0), /* in 4 is digital */
2547                 /* .digital_mode= DIGITAL_MODE_CAMERA, */
2548                 .gpiomux        = { 0x00400, 0x10400, 0x04400, 0x80000 },
2549                 .gpiomute       = 0x12400,
2550                 .no_msp34xx     = 1,
2551                 .pll            = PLL_28,
2552                 .tuner_type     = TUNER_LG_PAL_FM,
2553                 .tuner_addr     = ADDR_UNSET,
2554                 .has_remote     = 1,
2555         },
2556                 /* ---- card 0x8b ---------------------------------- */
2557         [BTTV_BOARD_PV_M4900] = {
2558                 /* Sérgio Fortier <sergiofortier@yahoo.com.br> */
2559                 .name           = "Prolink PixelView PlayTV MPEG2 PV-M4900",
2560                 .video_inputs   = 3,
2561                 /* .audio_inputs= 1, */
2562                 .svhs           = 2,
2563                 .gpiomask       = 0x3f,
2564                 .muxsel         = MUXSEL(2, 3, 1, 1),
2565                 .gpiomux        = { 0x21, 0x20, 0x24, 0x2c },
2566                 .gpiomute       = 0x29,
2567                 .no_msp34xx     = 1,
2568                 .pll            = PLL_28,
2569                 .tuner_type     = TUNER_YMEC_TVF_5533MF,
2570                 .tuner_addr     = ADDR_UNSET,
2571                 .has_radio      = 1,
2572                 .has_remote     = 1,
2573         },
2574                 /* ---- card 0x8c ---------------------------------- */
2575         /* Has four Bt878 chips behind a PCI bridge, each chip has:
2576              one external BNC composite input (mux 2)
2577              three internal composite inputs (unknown muxes)
2578              an 18-bit stereo A/D (CS5331A), which has:
2579                one external stereo unblanced (RCA) audio connection
2580                one (or 3?) internal stereo balanced (XLR) audio connection
2581                input is selected via gpio to a 14052B mux
2582                  (mask=0x300, unbal=0x000, bal=0x100, ??=0x200,0x300)
2583                gain is controlled via an X9221A chip on the I2C bus @0x28
2584                sample rate is controlled via gpio to an MK1413S
2585                  (mask=0x3, 32kHz=0x0, 44.1kHz=0x1, 48kHz=0x2, ??=0x3)
2586              There is neither a tuner nor an svideo input. */
2587         [BTTV_BOARD_OSPREY440]  = {
2588                 .name           = "Osprey 440",
2589                 .video_inputs   = 4,
2590                 /* .audio_inputs= 2, */
2591                 .svhs           = NO_SVHS,
2592                 .muxsel         = MUXSEL(2, 3, 0, 1), /* 3,0,1 are guesses */
2593                 .gpiomask       = 0x303,
2594                 .gpiomute       = 0x000, /* int + 32kHz */
2595                 .gpiomux        = { 0, 0, 0x000, 0x100},
2596                 .pll            = PLL_28,
2597                 .tuner_type     = TUNER_ABSENT,
2598                 .tuner_addr     = ADDR_UNSET,
2599                 .no_msp34xx     = 1,
2600                 .no_tda7432     = 1,
2601         },
2602                 /* ---- card 0x8d ---------------------------------- */
2603         [BTTV_BOARD_ASOUND_SKYEYE] = {
2604                 .name           = "Asound Skyeye PCTV",
2605                 .video_inputs   = 3,
2606                 /* .audio_inputs= 1, */
2607                 .svhs           = 2,
2608                 .gpiomask       = 15,
2609                 .muxsel         = MUXSEL(2, 3, 1, 1),
2610                 .gpiomux        = { 2, 0, 0, 0 },
2611                 .gpiomute       = 1,
2612                 .needs_tvaudio  = 1,
2613                 .pll            = PLL_28,
2614                 .tuner_type     = TUNER_PHILIPS_NTSC,
2615                 .tuner_addr     = ADDR_UNSET,
2616         },
2617                 /* ---- card 0x8e ---------------------------------- */
2618         [BTTV_BOARD_SABRENT_TVFM] = {
2619                 .name           = "Sabrent TV-FM (bttv version)",
2620                 .video_inputs   = 3,
2621                 /* .audio_inputs= 1, */
2622                 .svhs           = 2,
2623                 .gpiomask       = 0x108007,
2624                 .muxsel         = MUXSEL(2, 3, 1, 1),
2625                 .gpiomux        = { 100000, 100002, 100002, 100000 },
2626                 .no_msp34xx     = 1,
2627                 .no_tda7432     = 1,
2628                 .pll            = PLL_28,
2629                 .tuner_type     = TUNER_TNF_5335MF,
2630                 .tuner_addr     = ADDR_UNSET,
2631                 .has_radio      = 1,
2632         },
2633         /* ---- card 0x8f ---------------------------------- */
2634         [BTTV_BOARD_HAUPPAUGE_IMPACTVCB] = {
2635                 .name           = "Hauppauge ImpactVCB (bt878)",
2636                 .video_inputs   = 4,
2637                 /* .audio_inputs= 0, */
2638                 .svhs           = NO_SVHS,
2639                 .gpiomask       = 0x0f, /* old: 7 */
2640                 .muxsel         = MUXSEL(0, 1, 3, 2), /* Composite 0-3 */
2641                 .no_msp34xx     = 1,
2642                 .no_tda7432     = 1,
2643                 .tuner_type     = TUNER_ABSENT,
2644                 .tuner_addr     = ADDR_UNSET,
2645         },
2646         [BTTV_BOARD_MACHTV_MAGICTV] = {
2647                 /* Julian Calaby <julian.calaby@gmail.com>
2648                  * Slightly different from original MachTV definition (0x60)
2649
2650                  * FIXME: RegSpy says gpiomask should be "0x001c800f", but it
2651                  * stuffs up remote chip. Bug is a pin on the jaecs is not set
2652                  * properly (methinks) causing no keyup bits being set */
2653
2654                 .name           = "MagicTV", /* rebranded MachTV */
2655                 .video_inputs   = 3,
2656                 /* .audio_inputs= 1, */
2657                 .svhs           = 2,
2658                 .gpiomask       = 7,
2659                 .muxsel         = MUXSEL(2, 3, 1, 1),
2660                 .gpiomux        = { 0, 1, 2, 3 },
2661                 .gpiomute       = 4,
2662                 .tuner_type     = TUNER_TEMIC_4009FR5_PAL,
2663                 .tuner_addr     = ADDR_UNSET,
2664                 .pll            = PLL_28,
2665                 .has_radio      = 1,
2666                 .has_remote     = 1,
2667         },
2668         [BTTV_BOARD_SSAI_SECURITY] = {
2669                 .name           = "SSAI Security Video Interface",
2670                 .video_inputs   = 4,
2671                 /* .audio_inputs= 0, */
2672                 .svhs           = NO_SVHS,
2673                 .muxsel         = MUXSEL(0, 1, 2, 3),
2674                 .tuner_type     = TUNER_ABSENT,
2675                 .tuner_addr     = ADDR_UNSET,
2676         },
2677         [BTTV_BOARD_SSAI_ULTRASOUND] = {
2678                 .name           = "SSAI Ultrasound Video Interface",
2679                 .video_inputs   = 2,
2680                 /* .audio_inputs= 0, */
2681                 .svhs           = 1,
2682                 .muxsel         = MUXSEL(2, 0, 1, 3),
2683                 .tuner_type     = TUNER_ABSENT,
2684                 .tuner_addr     = ADDR_UNSET,
2685         },
2686         /* ---- card 0x94---------------------------------- */
2687         [BTTV_BOARD_DVICO_FUSIONHDTV_2] = {
2688                 .name           = "DViCO FusionHDTV 2",
2689                 .tuner_type     = TUNER_PHILIPS_FCV1236D,
2690                 .tuner_addr     = ADDR_UNSET,
2691                 .video_inputs   = 3,
2692                 /* .audio_inputs= 1, */
2693                 .svhs           = 2,
2694                 .muxsel         = MUXSEL(2, 3, 1),
2695                 .gpiomask       = 0x00e00007,
2696                 .gpiomux        = { 0x00400005, 0, 0x00000001, 0 },
2697                 .gpiomute       = 0x00c00007,
2698                 .no_msp34xx     = 1,
2699                 .no_tda7432     = 1,
2700         },
2701         /* ---- card 0x95---------------------------------- */
2702         [BTTV_BOARD_TYPHOON_TVTUNERPCI] = {
2703                 .name           = "Typhoon TV-Tuner PCI (50684)",
2704                 .video_inputs   = 3,
2705                 /* .audio_inputs= 1, */
2706                 .svhs           = 2,
2707                 .gpiomask       = 0x3014f,
2708                 .muxsel         = MUXSEL(2, 3, 1, 1),
2709                 .gpiomux        = { 0x20001,0x10001, 0, 0 },
2710                 .gpiomute       = 10,
2711                 .needs_tvaudio  = 1,
2712                 .pll            = PLL_28,
2713                 .tuner_type     = TUNER_PHILIPS_PAL_I,
2714                 .tuner_addr     = ADDR_UNSET,
2715         },
2716         [BTTV_BOARD_GEOVISION_GV600] = {
2717                 /* emhn@usb.ve */
2718                 .name           = "Geovision GV-600",
2719                 .video_inputs   = 16,
2720                 /* .audio_inputs= 0, */
2721                 .svhs           = NO_SVHS,
2722                 .gpiomask       = 0x0,
2723                 .muxsel         = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2),
2724                 .muxsel_hook    = geovision_muxsel,
2725                 .gpiomux        = { 0 },
2726                 .no_msp34xx     = 1,
2727                 .pll            = PLL_28,
2728                 .tuner_type     = TUNER_ABSENT,
2729                 .tuner_addr     = ADDR_UNSET,
2730         },
2731         [BTTV_BOARD_KOZUMI_KTV_01C] = {
2732                 /* Mauro Lacy <mauro@lacy.com.ar>
2733                  * Based on MagicTV and Conceptronic CONTVFMi */
2734
2735                 .name           = "Kozumi KTV-01C",
2736                 .video_inputs   = 3,
2737                 /* .audio_inputs= 1, */
2738                 .svhs           = 2,
2739                 .gpiomask       = 0x008007,
2740                 .muxsel         = MUXSEL(2, 3, 1, 1),
2741                 .gpiomux        = { 0, 1, 2, 2 }, /* CONTVFMi */
2742                 .gpiomute       = 3, /* CONTVFMi */
2743                 .needs_tvaudio  = 0,
2744                 .tuner_type     = TUNER_PHILIPS_FM1216ME_MK3, /* TCL MK3 */
2745                 .tuner_addr     = ADDR_UNSET,
2746                 .pll            = PLL_28,
2747                 .has_radio      = 1,
2748                 .has_remote     = 1,
2749         },
2750         [BTTV_BOARD_ENLTV_FM_2] = {
2751                 /* Encore TV Tuner Pro ENL TV-FM-2
2752                    Mauro Carvalho Chehab <mchehab@infradead.org */
2753                 .name           = "Encore ENL TV-FM-2",
2754                 .video_inputs   = 3,
2755                 /* .audio_inputs= 1, */
2756                 .svhs           = 2,
2757                 /* bit 6          -> IR disabled
2758                    bit 18/17 = 00 -> mute
2759                                01 -> enable external audio input
2760                                10 -> internal audio input (mono?)
2761                                11 -> internal audio input
2762                  */
2763                 .gpiomask       = 0x060040,
2764                 .muxsel         = MUXSEL(2, 3, 3),
2765                 .gpiomux        = { 0x60000, 0x60000, 0x20000, 0x20000 },
2766                 .gpiomute       = 0,
2767                 .tuner_type     = TUNER_TCL_MF02GIP_5N,
2768                 .tuner_addr     = ADDR_UNSET,
2769                 .pll            = PLL_28,
2770                 .has_radio      = 1,
2771                 .has_remote     = 1,
2772         },
2773                 [BTTV_BOARD_VD012] = {
2774                 /* D.Heer@Phytec.de */
2775                 .name           = "PHYTEC VD-012 (bt878)",
2776                 .video_inputs   = 4,
2777                 /* .audio_inputs= 0, */
2778                 .svhs           = NO_SVHS,
2779                 .gpiomask       = 0x00,
2780                 .muxsel         = MUXSEL(0, 2, 3, 1),
2781                 .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2782                 .needs_tvaudio  = 0,
2783                 .pll            = PLL_28,
2784                 .tuner_type     = TUNER_ABSENT,
2785                 .tuner_addr     = ADDR_UNSET,
2786         },
2787                 [BTTV_BOARD_VD012_X1] = {
2788                 /* D.Heer@Phytec.de */
2789                 .name           = "PHYTEC VD-012-X1 (bt878)",
2790                 .video_inputs   = 4,
2791                 /* .audio_inputs= 0, */
2792                 .svhs           = 3,
2793                 .gpiomask       = 0x00,
2794                 .muxsel         = MUXSEL(2, 3, 1),
2795                 .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2796                 .needs_tvaudio  = 0,
2797                 .pll            = PLL_28,
2798                 .tuner_type     = TUNER_ABSENT,
2799                 .tuner_addr     = ADDR_UNSET,
2800         },
2801                 [BTTV_BOARD_VD012_X2] = {
2802                 /* D.Heer@Phytec.de */
2803                 .name           = "PHYTEC VD-012-X2 (bt878)",
2804                 .video_inputs   = 4,
2805                 /* .audio_inputs= 0, */
2806                 .svhs           = 3,
2807                 .gpiomask       = 0x00,
2808                 .muxsel         = MUXSEL(3, 2, 1),
2809                 .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2810                 .needs_tvaudio  = 0,
2811                 .pll            = PLL_28,
2812                 .tuner_type     = TUNER_ABSENT,
2813                 .tuner_addr     = ADDR_UNSET,
2814         },
2815                 [BTTV_BOARD_GEOVISION_GV800S] = {
2816                 /* Bruno Christo <bchristo@inf.ufsm.br>
2817                  *
2818                  * GeoVision GV-800(S) has 4 Conexant Fusion 878A:
2819                  *      1 audio input  per BT878A = 4 audio inputs
2820                  *      4 video inputs per BT878A = 16 video inputs
2821                  * This is the first BT878A chip of the GV-800(S). It's the
2822                  * "master" chip and it controls the video inputs through an
2823                  * analog multiplexer (a CD22M3494) via some GPIO pins. The
2824                  * slaves should use card type 0x9e (following this one).
2825                  * There is a EEPROM on the card which is currently not handled.
2826                  * The audio input is not working yet.
2827                  */
2828                 .name           = "Geovision GV-800(S) (master)",
2829                 .video_inputs   = 4,
2830                 /* .audio_inputs= 1, */
2831                 .tuner_type     = TUNER_ABSENT,
2832                 .tuner_addr     = ADDR_UNSET,
2833                 .svhs           = NO_SVHS,
2834                 .gpiomask       = 0xf107f,
2835                 .no_gpioirq     = 1,
2836                 .muxsel         = MUXSEL(2, 2, 2, 2),
2837                 .pll            = PLL_28,
2838                 .no_msp34xx     = 1,
2839                 .no_tda7432     = 1,
2840                 .muxsel_hook    = gv800s_muxsel,
2841         },
2842                 [BTTV_BOARD_GEOVISION_GV800S_SL] = {
2843                 /* Bruno Christo <bchristo@inf.ufsm.br>
2844                  *
2845                  * GeoVision GV-800(S) has 4 Conexant Fusion 878A:
2846                  *      1 audio input  per BT878A = 4 audio inputs
2847                  *      4 video inputs per BT878A = 16 video inputs
2848                  * The 3 other BT878A chips are "slave" chips of the GV-800(S)
2849                  * and should use this card type.
2850                  * The audio input is not working yet.
2851                  */
2852                 .name           = "Geovision GV-800(S) (slave)",
2853                 .video_inputs   = 4,
2854                 /* .audio_inputs= 1, */
2855                 .tuner_type     = TUNER_ABSENT,
2856                 .tuner_addr     = ADDR_UNSET,
2857                 .svhs           = NO_SVHS,
2858                 .gpiomask       = 0x00,
2859                 .no_gpioirq     = 1,
2860                 .muxsel         = MUXSEL(2, 2, 2, 2),
2861                 .pll            = PLL_28,
2862                 .no_msp34xx     = 1,
2863                 .no_tda7432     = 1,
2864                 .muxsel_hook    = gv800s_muxsel,
2865         },
2866         [BTTV_BOARD_PV183] = {
2867                 .name           = "ProVideo PV183", /* 0x9f */
2868                 .video_inputs   = 2,
2869                 /* .audio_inputs= 0, */
2870                 .svhs           = NO_SVHS,
2871                 .gpiomask       = 0,
2872                 .muxsel         = MUXSEL(2, 3),
2873                 .gpiomux        = { 0 },
2874                 .needs_tvaudio  = 0,
2875                 .no_msp34xx     = 1,
2876                 .pll            = PLL_28,
2877                 .tuner_type     = TUNER_ABSENT,
2878                 .tuner_addr     = ADDR_UNSET,
2879         },
2880 };
2881
2882 static const unsigned int bttv_num_tvcards = ARRAY_SIZE(bttv_tvcards);
2883
2884 /* ----------------------------------------------------------------------- */
2885
2886 static unsigned char eeprom_data[256];
2887
2888 /*
2889  * identify card
2890  */
2891 void __devinit bttv_idcard(struct bttv *btv)
2892 {
2893         unsigned int gpiobits;
2894         int i,type;
2895         unsigned short tmp;
2896
2897         /* read PCI subsystem ID */
2898         pci_read_config_word(btv->c.pci, PCI_SUBSYSTEM_ID, &tmp);
2899         btv->cardid = tmp << 16;
2900         pci_read_config_word(btv->c.pci, PCI_SUBSYSTEM_VENDOR_ID, &tmp);
2901         btv->cardid |= tmp;
2902
2903         if (0 != btv->cardid && 0xffffffff != btv->cardid) {
2904                 /* look for the card */
2905                 for (type = -1, i = 0; cards[i].id != 0; i++)
2906                         if (cards[i].id  == btv->cardid)
2907                                 type = i;
2908
2909                 if (type != -1) {
2910                         /* found it */
2911                         printk(KERN_INFO "bttv%d: detected: %s [card=%d], "
2912                                "PCI subsystem ID is %04x:%04x\n",
2913                                btv->c.nr,cards[type].name,cards[type].cardnr,
2914                                btv->cardid & 0xffff,
2915                                (btv->cardid >> 16) & 0xffff);
2916                         btv->c.type = cards[type].cardnr;
2917                 } else {
2918                         /* 404 */
2919                         printk(KERN_INFO "bttv%d: subsystem: %04x:%04x (UNKNOWN)\n",
2920                                btv->c.nr, btv->cardid & 0xffff,
2921                                (btv->cardid >> 16) & 0xffff);
2922                         printk(KERN_DEBUG "please mail id, board name and "
2923                                "the correct card= insmod option to linux-media@vger.kernel.org\n");
2924                 }
2925         }
2926
2927         /* let the user override the autodetected type */
2928         if (card[btv->c.nr] < bttv_num_tvcards)
2929                 btv->c.type=card[btv->c.nr];
2930
2931         /* print which card config we are using */
2932         printk(KERN_INFO "bttv%d: using: %s [card=%d,%s]\n",btv->c.nr,
2933                bttv_tvcards[btv->c.type].name, btv->c.type,
2934                card[btv->c.nr] < bttv_num_tvcards
2935                ? "insmod option" : "autodetected");
2936
2937         /* overwrite gpio stuff ?? */
2938         if (UNSET == audioall && UNSET == audiomux[0])
2939                 return;
2940
2941         if (UNSET != audiomux[0]) {
2942                 gpiobits = 0;
2943                 for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
2944                         bttv_tvcards[btv->c.type].gpiomux[i] = audiomux[i];
2945                         gpiobits |= audiomux[i];
2946                 }
2947         } else {
2948                 gpiobits = audioall;
2949                 for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
2950                         bttv_tvcards[btv->c.type].gpiomux[i] = audioall;
2951                 }
2952         }
2953         bttv_tvcards[btv->c.type].gpiomask = (UNSET != gpiomask) ? gpiomask : gpiobits;
2954         printk(KERN_INFO "bttv%d: gpio config override: mask=0x%x, mux=",
2955                btv->c.nr,bttv_tvcards[btv->c.type].gpiomask);
2956         for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
2957                 printk("%s0x%x", i ? "," : "", bttv_tvcards[btv->c.type].gpiomux[i]);
2958         }
2959         printk("\n");
2960 }
2961
2962 /*
2963  * (most) board specific initialisations goes here
2964  */
2965
2966 /* Some Modular Technology cards have an eeprom, but no subsystem ID */
2967 static void identify_by_eeprom(struct bttv *btv, unsigned char eeprom_data[256])
2968 {
2969         int type = -1;
2970
2971         if (0 == strncmp(eeprom_data,"GET MM20xPCTV",13))
2972                 type = BTTV_BOARD_MODTEC_205;
2973         else if (0 == strncmp(eeprom_data+20,"Picolo",7))
2974                 type = BTTV_BOARD_EURESYS_PICOLO;
2975         else if (eeprom_data[0] == 0x84 && eeprom_data[2]== 0)
2976                 type = BTTV_BOARD_HAUPPAUGE; /* old bt848 */
2977
2978         if (-1 != type) {
2979                 btv->c.type = type;
2980                 printk("bttv%d: detected by eeprom: %s [card=%d]\n",
2981                        btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type);
2982         }
2983 }
2984
2985 static void flyvideo_gpio(struct bttv *btv)
2986 {
2987         int gpio, has_remote, has_radio, is_capture_only;
2988         int is_lr90, has_tda9820_tda9821;
2989         int tuner_type = UNSET, ttype;
2990
2991         gpio_inout(0xffffff, 0);
2992         udelay(8);  /* without this we would see the 0x1800 mask */
2993         gpio = gpio_read();
2994         /* FIXME: must restore OUR_EN ??? */
2995
2996         /* all cards provide GPIO info, some have an additional eeprom
2997          * LR50: GPIO coding can be found lower right CP1 .. CP9
2998          *       CP9=GPIO23 .. CP1=GPIO15; when OPEN, the corresponding GPIO reads 1.
2999          *       GPIO14-12: n.c.
3000          * LR90: GP9=GPIO23 .. GP1=GPIO15 (right above the bt878)
3001
3002          * lowest 3 bytes are remote control codes (no handshake needed)
3003          * xxxFFF: No remote control chip soldered
3004          * xxxF00(LR26/LR50), xxxFE0(LR90): Remote control chip (LVA001 or CF45) soldered
3005          * Note: Some bits are Audio_Mask !
3006          */
3007         ttype = (gpio & 0x0f0000) >> 16;
3008         switch (ttype) {
3009         case 0x0:
3010                 tuner_type = 2;  /* NTSC, e.g. TPI8NSR11P */
3011                 break;
3012         case 0x2:
3013                 tuner_type = 39; /* LG NTSC (newer TAPC series) TAPC-H701P */
3014                 break;
3015         case 0x4:
3016                 tuner_type = 5;  /* Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216 */
3017                 break;
3018         case 0x6:
3019                 tuner_type = 37; /* LG PAL (newer TAPC series) TAPC-G702P */
3020                 break;
3021         case 0xC:
3022                 tuner_type = 3;  /* Philips SECAM(+PAL) FQ1216ME or FI1216MF */
3023                 break;
3024         default:
3025                 printk(KERN_INFO "bttv%d: FlyVideo_gpio: unknown tuner type.\n", btv->c.nr);
3026                 break;
3027         }
3028
3029         has_remote          =   gpio & 0x800000;
3030         has_radio           =   gpio & 0x400000;
3031         /*   unknown                   0x200000;
3032          *   unknown2                  0x100000; */
3033         is_capture_only     = !(gpio & 0x008000); /* GPIO15 */
3034         has_tda9820_tda9821 = !(gpio & 0x004000);
3035         is_lr90             = !(gpio & 0x002000); /* else LR26/LR50 (LR38/LR51 f. capture only) */
3036         /*
3037          * gpio & 0x001000    output bit for audio routing */
3038
3039         if (is_capture_only)
3040                 tuner_type = TUNER_ABSENT; /* No tuner present */
3041
3042         printk(KERN_INFO "bttv%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n",
3043                 btv->c.nr, has_radio ? "yes" : "no ",
3044                 has_remote ? "yes" : "no ", tuner_type, gpio);
3045         printk(KERN_INFO "bttv%d: FlyVideo  LR90=%s tda9821/tda9820=%s capture_only=%s\n",
3046                 btv->c.nr, is_lr90 ? "yes" : "no ",
3047                 has_tda9820_tda9821 ? "yes" : "no ",
3048                 is_capture_only ? "yes" : "no ");
3049
3050         if (tuner_type != UNSET) /* only set if known tuner autodetected, else let insmod option through */
3051                 btv->tuner_type = tuner_type;
3052         btv->has_radio = has_radio;
3053
3054         /* LR90 Audio Routing is done by 2 hef4052, so Audio_Mask has 4 bits: 0x001c80
3055          * LR26/LR50 only has 1 hef4052, Audio_Mask 0x000c00
3056          * Audio options: from tuner, from tda9821/tda9821(mono,stereo,sap), from tda9874, ext., mute */
3057         if (has_tda9820_tda9821)
3058                 btv->audio_mode_gpio = lt9415_audio;
3059         /* todo: if(has_tda9874) btv->audio_mode_gpio = fv2000s_audio; */
3060 }
3061
3062 static int miro_tunermap[] = { 0,6,2,3,   4,5,6,0,  3,0,4,5,  5,2,16,1,
3063                                14,2,17,1, 4,1,4,3,  1,2,16,1, 4,4,4,4 };
3064 static int miro_fmtuner[]  = { 0,0,0,0,   0,0,0,0,  0,0,0,0,  0,0,0,1,
3065                                1,1,1,1,   1,1,1,0,  0,0,0,0,  0,1,0,0 };
3066
3067 static void miro_pinnacle_gpio(struct bttv *btv)
3068 {
3069         int id,msp,gpio;
3070         char *info;
3071
3072         gpio_inout(0xffffff, 0);
3073         gpio = gpio_read();
3074         id   = ((gpio>>10) & 63) -1;
3075         msp  = bttv_I2CRead(btv, I2C_ADDR_MSP3400, "MSP34xx");
3076         if (id < 32) {
3077                 btv->tuner_type = miro_tunermap[id];
3078                 if (0 == (gpio & 0x20)) {
3079                         btv->has_radio = 1;
3080                         if (!miro_fmtuner[id]) {
3081                                 btv->has_matchbox = 1;
3082                                 btv->mbox_we    = (1<<6);
3083                                 btv->mbox_most  = (1<<7);
3084                                 btv->mbox_clk   = (1<<8);
3085                                 btv->mbox_data  = (1<<9);
3086                                 btv->mbox_mask  = (1<<6)|(1<<7)|(1<<8)|(1<<9);
3087                         }
3088                 } else {
3089                         btv->has_radio = 0;
3090                 }
3091                 if (-1 != msp) {
3092                         if (btv->c.type == BTTV_BOARD_MIRO)
3093                                 btv->c.type = BTTV_BOARD_MIROPRO;
3094                         if (btv->c.type == BTTV_BOARD_PINNACLE)
3095                                 btv->c.type = BTTV_BOARD_PINNACLEPRO;
3096                 }
3097                 printk(KERN_INFO
3098                        "bttv%d: miro: id=%d tuner=%d radio=%s stereo=%s\n",
3099                        btv->c.nr, id+1, btv->tuner_type,
3100                        !btv->has_radio ? "no" :
3101                        (btv->has_matchbox ? "matchbox" : "fmtuner"),
3102                        (-1 == msp) ? "no" : "yes");
3103         } else {
3104                 /* new cards with microtune tuner */
3105                 id = 63 - id;
3106                 btv->has_radio = 0;
3107                 switch (id) {
3108                 case 1:
3109                         info = "PAL / mono";
3110                         btv->tda9887_conf = TDA9887_INTERCARRIER;
3111                         break;
3112                 case 2:
3113                         info = "PAL+SECAM / stereo";
3114                         btv->has_radio = 1;
3115                         btv->tda9887_conf = TDA9887_QSS;
3116                         break;
3117                 case 3:
3118                         info = "NTSC / stereo";
3119                         btv->has_radio = 1;
3120                         btv->tda9887_conf = TDA9887_QSS;
3121                         break;
3122                 case 4:
3123                         info = "PAL+SECAM / mono";
3124                         btv->tda9887_conf = TDA9887_QSS;
3125                         break;
3126                 case 5:
3127                         info = "NTSC / mono";
3128                         btv->tda9887_conf = TDA9887_INTERCARRIER;
3129                         break;
3130                 case 6:
3131                         info = "NTSC / stereo";
3132                         btv->tda9887_conf = TDA9887_INTERCARRIER;
3133                         break;
3134                 case 7:
3135                         info = "PAL / stereo";
3136                         btv->tda9887_conf = TDA9887_INTERCARRIER;
3137                         break;
3138                 default:
3139                         info = "oops: unknown card";
3140                         break;
3141                 }
3142                 if (-1 != msp)
3143                         btv->c.type = BTTV_BOARD_PINNACLEPRO;
3144                 printk(KERN_INFO
3145                        "bttv%d: pinnacle/mt: id=%d info=\"%s\" radio=%s\n",
3146                        btv->c.nr, id, info, btv->has_radio ? "yes" : "no");
3147                 btv->tuner_type = TUNER_MT2032;
3148         }
3149 }
3150
3151 /* GPIO21   L: Buffer aktiv, H: Buffer inaktiv */
3152 #define LM1882_SYNC_DRIVE     0x200000L
3153
3154 static void init_ids_eagle(struct bttv *btv)
3155 {
3156         gpio_inout(0xffffff,0xFFFF37);
3157         gpio_write(0x200020);
3158
3159         /* flash strobe inverter ?! */
3160         gpio_write(0x200024);
3161
3162         /* switch sync drive off */
3163         gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
3164
3165         /* set BT848 muxel to 2 */
3166         btaor((2)<<5, ~(2<<5), BT848_IFORM);
3167 }
3168
3169 /* Muxsel helper for the IDS Eagle.
3170  * the eagles does not use the standard muxsel-bits but
3171  * has its own multiplexer */
3172 static void eagle_muxsel(struct bttv *btv, unsigned int input)
3173 {
3174         gpio_bits(3, input & 3);
3175
3176         /* composite */
3177         /* set chroma ADC to sleep */
3178         btor(BT848_ADC_C_SLEEP, BT848_ADC);
3179         /* set to composite video */
3180         btand(~BT848_CONTROL_COMP, BT848_E_CONTROL);
3181         btand(~BT848_CONTROL_COMP, BT848_O_CONTROL);
3182
3183         /* switch sync drive off */
3184         gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
3185 }
3186
3187 static void gvc1100_muxsel(struct bttv *btv, unsigned int input)
3188 {
3189         static const int masks[] = {0x30, 0x01, 0x12, 0x23};
3190         gpio_write(masks[input%4]);
3191 }
3192
3193 /* LMLBT4x initialization - to allow access to GPIO bits for sensors input and
3194    alarms output
3195
3196    GPIObit    | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
3197    assignment | TI | O3|INx| O2| O1|IN4|IN3|IN2|IN1|   |   |
3198
3199    IN - sensor inputs, INx - sensor inputs and TI XORed together
3200    O1,O2,O3 - alarm outputs (relays)
3201
3202    OUT ENABLE   1    1   0  . 1  1   0   0 . 0   0   0    0   = 0x6C0
3203
3204 */
3205
3206 static void init_lmlbt4x(struct bttv *btv)
3207 {
3208         printk(KERN_DEBUG "LMLBT4x init\n");
3209         btwrite(0x000000, BT848_GPIO_REG_INP);
3210         gpio_inout(0xffffff, 0x0006C0);
3211         gpio_write(0x000000);
3212 }
3213
3214 static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input)
3215 {
3216         unsigned int inmux = input % 8;
3217         gpio_inout( 0xf, 0xf );
3218         gpio_bits( 0xf, inmux );
3219 }
3220
3221 static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input)
3222 {
3223         unsigned int inmux = input % 4;
3224         gpio_inout( 3<<9, 3<<9 );
3225         gpio_bits( 3<<9, inmux<<9 );
3226 }
3227
3228 static void geovision_muxsel(struct bttv *btv, unsigned int input)
3229 {
3230         unsigned int inmux = input % 16;
3231         gpio_inout(0xf, 0xf);
3232         gpio_bits(0xf, inmux);
3233 }
3234
3235 /* ----------------------------------------------------------------------- */
3236
3237 static void bttv_reset_audio(struct bttv *btv)
3238 {
3239         /*
3240          * BT878A has a audio-reset register.
3241          * 1. This register is an audio reset function but it is in
3242          *    function-0 (video capture) address space.
3243          * 2. It is enough to do this once per power-up of the card.
3244          * 3. There is a typo in the Conexant doc -- it is not at
3245          *    0x5B, but at 0x058. (B is an odd-number, obviously a typo!).
3246          * --//Shrikumar 030609
3247          */
3248         if (btv->id != 878)
3249                 return;
3250
3251         if (bttv_debug)
3252                 printk("bttv%d: BT878A ARESET\n",btv->c.nr);
3253         btwrite((1<<7), 0x058);
3254         udelay(10);
3255         btwrite(     0, 0x058);
3256 }
3257
3258 /* initialization part one -- before registering i2c bus */
3259 void __devinit bttv_init_card1(struct bttv *btv)
3260 {
3261         switch (btv->c.type) {
3262         case BTTV_BOARD_HAUPPAUGE:
3263         case BTTV_BOARD_HAUPPAUGE878:
3264                 boot_msp34xx(btv,5);
3265                 break;
3266         case BTTV_BOARD_VOODOOTV_200:
3267         case BTTV_BOARD_VOODOOTV_FM:
3268                 boot_msp34xx(btv,20);
3269                 break;
3270         case BTTV_BOARD_AVERMEDIA98:
3271                 boot_msp34xx(btv,11);
3272                 break;
3273         case BTTV_BOARD_HAUPPAUGEPVR:
3274                 pvr_boot(btv);
3275                 break;
3276         case BTTV_BOARD_TWINHAN_DST:
3277         case BTTV_BOARD_AVDVBT_771:
3278         case BTTV_BOARD_PINNACLESAT:
3279                 btv->use_i2c_hw = 1;
3280                 break;
3281         case BTTV_BOARD_ADLINK_RTV24:
3282                 init_RTV24( btv );
3283                 break;
3284
3285         }
3286         if (!bttv_tvcards[btv->c.type].has_dvb)
3287                 bttv_reset_audio(btv);
3288 }
3289
3290 /* initialization part two -- after registering i2c bus */
3291 void __devinit bttv_init_card2(struct bttv *btv)
3292 {
3293         btv->tuner_type = UNSET;
3294
3295         if (BTTV_BOARD_UNKNOWN == btv->c.type) {
3296                 bttv_readee(btv,eeprom_data,0xa0);
3297                 identify_by_eeprom(btv,eeprom_data);
3298         }
3299
3300         switch (btv->c.type) {
3301         case BTTV_BOARD_MIRO:
3302         case BTTV_BOARD_MIROPRO:
3303         case BTTV_BOARD_PINNACLE:
3304         case BTTV_BOARD_PINNACLEPRO:
3305                 /* miro/pinnacle */
3306                 miro_pinnacle_gpio(btv);
3307                 break;
3308         case BTTV_BOARD_FLYVIDEO_98:
3309         case BTTV_BOARD_MAXI:
3310         case BTTV_BOARD_LIFE_FLYKIT:
3311         case BTTV_BOARD_FLYVIDEO:
3312         case BTTV_BOARD_TYPHOON_TVIEW:
3313         case BTTV_BOARD_CHRONOS_VS2:
3314         case BTTV_BOARD_FLYVIDEO_98FM:
3315         case BTTV_BOARD_FLYVIDEO2000:
3316         case BTTV_BOARD_FLYVIDEO98EZ:
3317         case BTTV_BOARD_CONFERENCETV:
3318         case BTTV_BOARD_LIFETEC_9415:
3319                 flyvideo_gpio(btv);
3320                 break;
3321         case BTTV_BOARD_HAUPPAUGE:
3322         case BTTV_BOARD_HAUPPAUGE878:
3323         case BTTV_BOARD_HAUPPAUGEPVR:
3324                 /* pick up some config infos from the eeprom */
3325                 bttv_readee(btv,eeprom_data,0xa0);
3326                 hauppauge_eeprom(btv);
3327                 break;
3328         case BTTV_BOARD_AVERMEDIA98:
3329         case BTTV_BOARD_AVPHONE98:
3330                 bttv_readee(btv,eeprom_data,0xa0);
3331                 avermedia_eeprom(btv);
3332                 break;
3333         case BTTV_BOARD_PXC200:
3334                 init_PXC200(btv);
3335                 break;
3336         case BTTV_BOARD_PICOLO_TETRA_CHIP:
3337                 picolo_tetra_init(btv);
3338                 break;
3339         case BTTV_BOARD_VHX:
3340                 btv->has_radio    = 1;
3341                 btv->has_matchbox = 1;
3342                 btv->mbox_we      = 0x20;
3343                 btv->mbox_most    = 0;
3344                 btv->mbox_clk     = 0x08;
3345                 btv->mbox_data    = 0x10;
3346                 btv->mbox_mask    = 0x38;
3347                 break;
3348         case BTTV_BOARD_VOBIS_BOOSTAR:
3349         case BTTV_BOARD_TERRATV:
3350                 terratec_active_radio_upgrade(btv);
3351                 break;
3352         case BTTV_BOARD_MAGICTVIEW061:
3353                 if (btv->cardid == 0x3002144f) {
3354                         btv->has_radio=1;
3355                         printk("bttv%d: radio detected by subsystem id (CPH05x)\n",btv->c.nr);
3356                 }
3357                 break;
3358         case BTTV_BOARD_STB2:
3359                 if (btv->cardid == 0x3060121a) {
3360                         /* Fix up entry for 3DFX VoodooTV 100,
3361                            which is an OEM STB card variant. */
3362                         btv->has_radio=0;
3363                         btv->tuner_type=TUNER_TEMIC_NTSC;
3364                 }
3365                 break;
3366         case BTTV_BOARD_OSPREY1x0:
3367         case BTTV_BOARD_OSPREY1x0_848:
3368         case BTTV_BOARD_OSPREY101_848:
3369         case BTTV_BOARD_OSPREY1x1:
3370         case BTTV_BOARD_OSPREY1x1_SVID:
3371         case BTTV_BOARD_OSPREY2xx:
3372         case BTTV_BOARD_OSPREY2x0_SVID:
3373         case BTTV_BOARD_OSPREY2x0:
3374         case BTTV_BOARD_OSPREY440:
3375         case BTTV_BOARD_OSPREY500:
3376         case BTTV_BOARD_OSPREY540:
3377         case BTTV_BOARD_OSPREY2000:
3378                 bttv_readee(btv,eeprom_data,0xa0);
3379                 osprey_eeprom(btv, eeprom_data);
3380                 break;
3381         case BTTV_BOARD_IDS_EAGLE:
3382                 init_ids_eagle(btv);
3383                 break;
3384         case BTTV_BOARD_MODTEC_205:
3385                 bttv_readee(btv,eeprom_data,0xa0);
3386                 modtec_eeprom(btv);
3387                 break;
3388         case BTTV_BOARD_LMLBT4:
3389                 init_lmlbt4x(btv);
3390                 break;
3391         case BTTV_BOARD_TIBET_CS16:
3392                 tibetCS16_init(btv);
3393                 break;
3394         case BTTV_BOARD_KODICOM_4400R:
3395                 kodicom4400r_init(btv);
3396                 break;
3397         case BTTV_BOARD_GEOVISION_GV800S:
3398                 gv800s_init(btv);
3399                 break;
3400         }
3401
3402         /* pll configuration */
3403         if (!(btv->id==848 && btv->revision==0x11)) {
3404                 /* defaults from card list */
3405                 if (PLL_28 == bttv_tvcards[btv->c.type].pll) {
3406                         btv->pll.pll_ifreq=28636363;
3407                         btv->pll.pll_crystal=BT848_IFORM_XT0;
3408                 }
3409                 if (PLL_35 == bttv_tvcards[btv->c.type].pll) {
3410                         btv->pll.pll_ifreq=35468950;
3411                         btv->pll.pll_crystal=BT848_IFORM_XT1;
3412                 }
3413                 /* insmod options can override */
3414                 switch (pll[btv->c.nr]) {
3415                 case 0: /* none */
3416                         btv->pll.pll_crystal = 0;
3417                         btv->pll.pll_ifreq   = 0;
3418                         btv->pll.pll_ofreq   = 0;
3419                         break;
3420                 case 1: /* 28 MHz */
3421                 case 28:
3422                         btv->pll.pll_ifreq   = 28636363;
3423                         btv->pll.pll_ofreq   = 0;
3424                         btv->pll.pll_crystal = BT848_IFORM_XT0;
3425                         break;
3426                 case 2: /* 35 MHz */
3427                 case 35:
3428                         btv->pll.pll_ifreq   = 35468950;
3429                         btv->pll.pll_ofreq   = 0;
3430                         btv->pll.pll_crystal = BT848_IFORM_XT1;
3431                         break;
3432                 }
3433         }
3434         btv->pll.pll_current = -1;
3435
3436         /* tuner configuration (from card list / autodetect / insmod option) */
3437         if (UNSET != bttv_tvcards[btv->c.type].tuner_type)
3438                 if (UNSET == btv->tuner_type)
3439                         btv->tuner_type = bttv_tvcards[btv->c.type].tuner_type;
3440         if (UNSET != tuner[btv->c.nr])
3441                 btv->tuner_type = tuner[btv->c.nr];
3442
3443         if (btv->tuner_type == TUNER_ABSENT)
3444                 printk(KERN_INFO "bttv%d: tuner absent\n", btv->c.nr);
3445         else if(btv->tuner_type == UNSET)
3446                 printk(KERN_WARNING "bttv%d: tuner type unset\n", btv->c.nr);
3447         else
3448                 printk(KERN_INFO "bttv%d: tuner type=%d\n", btv->c.nr,
3449                        btv->tuner_type);
3450
3451         if (autoload != UNSET) {
3452                 printk(KERN_WARNING "bttv%d: the autoload option is obsolete.\n", btv->c.nr);
3453                 printk(KERN_WARNING "bttv%d: use option msp3400, tda7432 or tvaudio to\n", btv->c.nr);
3454                 printk(KERN_WARNING "bttv%d: override which audio module should be used.\n", btv->c.nr);
3455         }
3456
3457         if (UNSET == btv->tuner_type)
3458                 btv->tuner_type = TUNER_ABSENT;
3459
3460         btv->dig = bttv_tvcards[btv->c.type].has_dig_in ?
3461                    bttv_tvcards[btv->c.type].video_inputs - 1 : UNSET;
3462         btv->svhs = bttv_tvcards[btv->c.type].svhs == NO_SVHS ?
3463                     UNSET : bttv_tvcards[btv->c.type].svhs;
3464         if (svhs[btv->c.nr] != UNSET)
3465                 btv->svhs = svhs[btv->c.nr];
3466         if (remote[btv->c.nr] != UNSET)
3467                 btv->has_remote = remote[btv->c.nr];
3468
3469         if (bttv_tvcards[btv->c.type].has_radio)
3470                 btv->has_radio = 1;
3471         if (bttv_tvcards[btv->c.type].has_remote)
3472                 btv->has_remote = 1;
3473         if (!bttv_tvcards[btv->c.type].no_gpioirq)
3474                 btv->gpioirq = 1;
3475         if (bttv_tvcards[btv->c.type].volume_gpio)
3476                 btv->volume_gpio = bttv_tvcards[btv->c.type].volume_gpio;
3477         if (bttv_tvcards[btv->c.type].audio_mode_gpio)
3478                 btv->audio_mode_gpio = bttv_tvcards[btv->c.type].audio_mode_gpio;
3479
3480         if (btv->tuner_type == TUNER_ABSENT)
3481                 return;  /* no tuner or related drivers to load */
3482
3483         if (btv->has_saa6588 || saa6588[btv->c.nr]) {
3484                 /* Probe for RDS receiver chip */
3485                 static const unsigned short addrs[] = {
3486                         0x20 >> 1,
3487                         0x22 >> 1,
3488                         I2C_CLIENT_END
3489                 };
3490                 struct v4l2_subdev *sd;
3491
3492                 sd = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3493                         &btv->c.i2c_adap, "saa6588", 0, addrs);
3494                 btv->has_saa6588 = (sd != NULL);
3495         }
3496
3497         /* try to detect audio/fader chips */
3498
3499         /* First check if the user specified the audio chip via a module
3500            option. */
3501
3502         switch (audiodev[btv->c.nr]) {
3503         case -1:
3504                 return; /* do not load any audio module */
3505
3506         case 0: /* autodetect */
3507                 break;
3508
3509         case 1: {
3510                 /* The user specified that we should probe for msp3400 */
3511                 static const unsigned short addrs[] = {
3512                         I2C_ADDR_MSP3400 >> 1,
3513                         I2C_ADDR_MSP3400_ALT >> 1,
3514                         I2C_CLIENT_END
3515                 };
3516
3517                 btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3518                         &btv->c.i2c_adap, "msp3400", 0, addrs);
3519                 if (btv->sd_msp34xx)
3520                         return;
3521                 goto no_audio;
3522         }
3523
3524         case 2: {
3525                 /* The user specified that we should probe for tda7432 */
3526                 static const unsigned short addrs[] = {
3527                         I2C_ADDR_TDA7432 >> 1,
3528                         I2C_CLIENT_END
3529                 };
3530
3531                 if (v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3532                                 &btv->c.i2c_adap, "tda7432", 0, addrs))
3533                         return;
3534                 goto no_audio;
3535         }
3536
3537         case 3: {
3538                 /* The user specified that we should probe for tvaudio */
3539                 btv->sd_tvaudio = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3540                         &btv->c.i2c_adap, "tvaudio", 0, tvaudio_addrs());
3541                 if (btv->sd_tvaudio)
3542                         return;
3543                 goto no_audio;
3544         }
3545
3546         default:
3547                 printk(KERN_WARNING "bttv%d: unknown audiodev value!\n",
3548                         btv->c.nr);
3549                 return;
3550         }
3551
3552         /* There were no overrides, so now we try to discover this through the
3553            card definition */
3554
3555         /* probe for msp3400 first: this driver can detect whether or not
3556            it really is a msp3400, so it will return NULL when the device
3557            found is really something else (e.g. a tea6300). */
3558         if (!bttv_tvcards[btv->c.type].no_msp34xx) {
3559                 btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3560                         &btv->c.i2c_adap, "msp3400",
3561                         0, I2C_ADDRS(I2C_ADDR_MSP3400 >> 1));
3562         } else if (bttv_tvcards[btv->c.type].msp34xx_alt) {
3563                 btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3564                         &btv->c.i2c_adap, "msp3400",
3565                         0, I2C_ADDRS(I2C_ADDR_MSP3400_ALT >> 1));
3566         }
3567
3568         /* If we found a msp34xx, then we're done. */
3569         if (btv->sd_msp34xx)
3570                 return;
3571
3572         /* it might also be a tda7432. */
3573         if (!bttv_tvcards[btv->c.type].no_tda7432) {
3574                 static const unsigned short addrs[] = {
3575                         I2C_ADDR_TDA7432 >> 1,
3576                         I2C_CLIENT_END
3577                 };
3578
3579                 if (v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3580                                 &btv->c.i2c_adap, "tda7432", 0, addrs))
3581                         return;
3582         }
3583
3584         /* Now see if we can find one of the tvaudio devices. */
3585         btv->sd_tvaudio = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3586                 &btv->c.i2c_adap, "tvaudio", 0, tvaudio_addrs());
3587         if (btv->sd_tvaudio)
3588                 return;
3589
3590 no_audio:
3591         printk(KERN_WARNING "bttv%d: audio absent, no audio device found!\n",
3592                         btv->c.nr);
3593 }
3594
3595
3596 /* initialize the tuner */
3597 void __devinit bttv_init_tuner(struct bttv *btv)
3598 {
3599         int addr = ADDR_UNSET;
3600
3601         if (ADDR_UNSET != bttv_tvcards[btv->c.type].tuner_addr)
3602                 addr = bttv_tvcards[btv->c.type].tuner_addr;
3603
3604         if (btv->tuner_type != TUNER_ABSENT) {
3605                 struct tuner_setup tun_setup;
3606
3607                 /* Load tuner module before issuing tuner config call! */
3608                 if (bttv_tvcards[btv->c.type].has_radio)
3609                         v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3610                                 &btv->c.i2c_adap, "tuner",
3611                                 0, v4l2_i2c_tuner_addrs(ADDRS_RADIO));
3612                 v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3613                                 &btv->c.i2c_adap, "tuner",
3614                                 0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
3615                 v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3616                                 &btv->c.i2c_adap, "tuner",
3617                                 0, v4l2_i2c_tuner_addrs(ADDRS_TV_WITH_DEMOD));
3618
3619                 tun_setup.mode_mask = T_ANALOG_TV;
3620                 tun_setup.type = btv->tuner_type;
3621                 tun_setup.addr = addr;
3622
3623                 if (bttv_tvcards[btv->c.type].has_radio)
3624                         tun_setup.mode_mask |= T_RADIO;
3625
3626                 bttv_call_all(btv, tuner, s_type_addr, &tun_setup);
3627         }
3628
3629         if (btv->tda9887_conf) {
3630                 struct v4l2_priv_tun_config tda9887_cfg;
3631
3632                 tda9887_cfg.tuner = TUNER_TDA9887;
3633                 tda9887_cfg.priv = &btv->tda9887_conf;
3634
3635                 bttv_call_all(btv, tuner, s_config, &tda9887_cfg);
3636         }
3637 }
3638
3639 /* ----------------------------------------------------------------------- */
3640
3641 static void modtec_eeprom(struct bttv *btv)
3642 {
3643         if( strncmp(&(eeprom_data[0x1e]),"Temic 4066 FY5",14) ==0) {
3644                 btv->tuner_type=TUNER_TEMIC_4066FY5_PAL_I;
3645                 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
3646                        btv->c.nr,&eeprom_data[0x1e]);
3647         } else if (strncmp(&(eeprom_data[0x1e]),"Alps TSBB5",10) ==0) {
3648                 btv->tuner_type=TUNER_ALPS_TSBB5_PAL_I;
3649                 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
3650                        btv->c.nr,&eeprom_data[0x1e]);
3651         } else if (strncmp(&(eeprom_data[0x1e]),"Philips FM1246",14) ==0) {
3652                 btv->tuner_type=TUNER_PHILIPS_NTSC;
3653                 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
3654                        btv->c.nr,&eeprom_data[0x1e]);
3655         } else {
3656                 printk("bttv%d: Modtec: Unknown TunerString: %s\n",
3657                        btv->c.nr,&eeprom_data[0x1e]);
3658         }
3659 }
3660
3661 static void __devinit hauppauge_eeprom(struct bttv *btv)
3662 {
3663         struct tveeprom tv;
3664
3665         tveeprom_hauppauge_analog(&btv->i2c_client, &tv, eeprom_data);
3666         btv->tuner_type = tv.tuner_type;
3667         btv->has_radio  = tv.has_radio;
3668
3669         printk("bttv%d: Hauppauge eeprom indicates model#%d\n",
3670                 btv->c.nr, tv.model);
3671
3672         /*
3673          * Some of the 878 boards have duplicate PCI IDs. Switch the board
3674          * type based on model #.
3675          */
3676         if(tv.model == 64900) {
3677                 printk("bttv%d: Switching board type from %s to %s\n",
3678                         btv->c.nr,
3679                         bttv_tvcards[btv->c.type].name,
3680                         bttv_tvcards[BTTV_BOARD_HAUPPAUGE_IMPACTVCB].name);
3681                 btv->c.type = BTTV_BOARD_HAUPPAUGE_IMPACTVCB;
3682         }
3683 }
3684
3685 static int terratec_active_radio_upgrade(struct bttv *btv)
3686 {
3687         int freq;
3688
3689         btv->has_radio    = 1;
3690         btv->has_matchbox = 1;
3691         btv->mbox_we      = 0x10;
3692         btv->mbox_most    = 0x20;
3693         btv->mbox_clk     = 0x08;
3694         btv->mbox_data    = 0x04;
3695         btv->mbox_mask    = 0x3c;
3696
3697         btv->mbox_iow     = 1 <<  8;
3698         btv->mbox_ior     = 1 <<  9;
3699         btv->mbox_csel    = 1 << 10;
3700
3701         freq=88000/62.5;
3702         tea5757_write(btv, 5 * freq + 0x358); /* write 0x1ed8 */
3703         if (0x1ed8 == tea5757_read(btv)) {
3704                 printk("bttv%d: Terratec Active Radio Upgrade found.\n",
3705                        btv->c.nr);
3706                 btv->has_radio    = 1;
3707                 btv->has_saa6588  = 1;
3708                 btv->has_matchbox = 1;
3709         } else {
3710                 btv->has_radio    = 0;
3711                 btv->has_matchbox = 0;
3712         }
3713         return 0;
3714 }
3715
3716
3717 /* ----------------------------------------------------------------------- */
3718
3719 /*
3720  * minimal bootstrap for the WinTV/PVR -- upload altera firmware.
3721  *
3722  * The hcwamc.rbf firmware file is on the Hauppauge driver CD.  Have
3723  * a look at Pvr/pvr45xxx.EXE (self-extracting zip archive, can be
3724  * unpacked with unzip).
3725  */
3726 #define PVR_GPIO_DELAY          10
3727
3728 #define BTTV_ALT_DATA           0x000001
3729 #define BTTV_ALT_DCLK           0x100000
3730 #define BTTV_ALT_NCONFIG        0x800000
3731
3732 static int __devinit pvr_altera_load(struct bttv *btv, const u8 *micro,
3733                                      u32 microlen)
3734 {
3735         u32 n;
3736         u8 bits;
3737         int i;
3738
3739         gpio_inout(0xffffff,BTTV_ALT_DATA|BTTV_ALT_DCLK|BTTV_ALT_NCONFIG);
3740         gpio_write(0);
3741         udelay(PVR_GPIO_DELAY);
3742
3743         gpio_write(BTTV_ALT_NCONFIG);
3744         udelay(PVR_GPIO_DELAY);
3745
3746         for (n = 0; n < microlen; n++) {
3747                 bits = micro[n];
3748                 for (i = 0 ; i < 8 ; i++) {
3749                         gpio_bits(BTTV_ALT_DCLK,0);
3750                         if (bits & 0x01)
3751                                 gpio_bits(BTTV_ALT_DATA,BTTV_ALT_DATA);
3752                         else
3753                                 gpio_bits(BTTV_ALT_DATA,0);
3754                         gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
3755                         bits >>= 1;
3756                 }
3757         }
3758         gpio_bits(BTTV_ALT_DCLK,0);
3759         udelay(PVR_GPIO_DELAY);
3760
3761         /* begin Altera init loop (Not necessary,but doesn't hurt) */
3762         for (i = 0 ; i < 30 ; i++) {
3763                 gpio_bits(BTTV_ALT_DCLK,0);
3764                 gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
3765         }
3766         gpio_bits(BTTV_ALT_DCLK,0);
3767         return 0;
3768 }
3769
3770 static int __devinit pvr_boot(struct bttv *btv)
3771 {
3772         const struct firmware *fw_entry;
3773         int rc;
3774
3775         rc = request_firmware(&fw_entry, "hcwamc.rbf", &btv->c.pci->dev);
3776         if (rc != 0) {
3777                 printk(KERN_WARNING "bttv%d: no altera firmware [via hotplug]\n",
3778                        btv->c.nr);
3779                 return rc;
3780         }
3781         rc = pvr_altera_load(btv, fw_entry->data, fw_entry->size);
3782         printk(KERN_INFO "bttv%d: altera firmware upload %s\n",
3783                btv->c.nr, (rc < 0) ? "failed" : "ok");
3784         release_firmware(fw_entry);
3785         return rc;
3786 }
3787
3788 /* ----------------------------------------------------------------------- */
3789 /* some osprey specific stuff                                              */
3790
3791 static void __devinit osprey_eeprom(struct bttv *btv, const u8 ee[256])
3792 {
3793         int i;
3794         u32 serial = 0;
3795         int cardid = -1;
3796
3797         /* This code will nevery actually get called in this case.... */
3798         if (btv->c.type == BTTV_BOARD_UNKNOWN) {
3799                 /* this might be an antique... check for MMAC label in eeprom */
3800                 if (!strncmp(ee, "MMAC", 4)) {
3801                         u8 checksum = 0;
3802                         for (i = 0; i < 21; i++)
3803                                 checksum += ee[i];
3804                         if (checksum != ee[21])
3805                                 return;
3806                         cardid = BTTV_BOARD_OSPREY1x0_848;
3807                         for (i = 12; i < 21; i++)
3808                                 serial *= 10, serial += ee[i] - '0';
3809                 }
3810         } else {
3811                 unsigned short type;
3812
3813                 for (i = 4*16; i < 8*16; i += 16) {
3814                         u16 checksum = ip_compute_csum(ee + i, 16);
3815
3816                         if ((checksum&0xff) + (checksum>>8) == 0xff)
3817                                 break;
3818                 }
3819                 if (i >= 8*16)
3820                         return;
3821                 ee += i;
3822
3823                 /* found a valid descriptor */
3824                 type = get_unaligned_be16((__be16 *)(ee+4));
3825
3826                 switch(type) {
3827                 /* 848 based */
3828                 case 0x0004:
3829                         cardid = BTTV_BOARD_OSPREY1x0_848;
3830                         break;
3831                 case 0x0005:
3832                         cardid = BTTV_BOARD_OSPREY101_848;
3833                         break;
3834
3835                 /* 878 based */
3836                 case 0x0012:
3837                 case 0x0013:
3838                         cardid = BTTV_BOARD_OSPREY1x0;
3839                         break;
3840                 case 0x0014:
3841                 case 0x0015:
3842                         cardid = BTTV_BOARD_OSPREY1x1;
3843                         break;
3844                 case 0x0016:
3845                 case 0x0017:
3846                 case 0x0020:
3847                         cardid = BTTV_BOARD_OSPREY1x1_SVID;
3848                         break;
3849                 case 0x0018:
3850                 case 0x0019:
3851                 case 0x001E:
3852                 case 0x001F:
3853                         cardid = BTTV_BOARD_OSPREY2xx;
3854                         break;
3855                 case 0x001A:
3856                 case 0x001B:
3857                         cardid = BTTV_BOARD_OSPREY2x0_SVID;
3858                         break;
3859                 case 0x0040:
3860                         cardid = BTTV_BOARD_OSPREY500;
3861                         break;
3862                 case 0x0050:
3863                 case 0x0056:
3864                         cardid = BTTV_BOARD_OSPREY540;
3865                         /* bttv_osprey_540_init(btv); */
3866                         break;
3867                 case 0x0060:
3868                 case 0x0070:
3869                 case 0x00A0:
3870                         cardid = BTTV_BOARD_OSPREY2x0;
3871                         /* enable output on select control lines */
3872                         gpio_inout(0xffffff,0x000303);
3873                         break;
3874                 case 0x00D8:
3875                         cardid = BTTV_BOARD_OSPREY440;
3876                         break;
3877                 default:
3878                         /* unknown...leave generic, but get serial # */
3879                         printk(KERN_INFO "bttv%d: "
3880                                "osprey eeprom: unknown card type 0x%04x\n",
3881                                btv->c.nr, type);
3882                         break;
3883                 }
3884                 serial = get_unaligned_be32((__be32 *)(ee+6));
3885         }
3886
3887         printk(KERN_INFO "bttv%d: osprey eeprom: card=%d '%s' serial=%u\n",
3888                btv->c.nr, cardid,
3889                cardid>0 ? bttv_tvcards[cardid].name : "Unknown", serial);
3890
3891         if (cardid<0 || btv->c.type == cardid)
3892                 return;
3893
3894         /* card type isn't set correctly */
3895         if (card[btv->c.nr] < bttv_num_tvcards) {
3896                 printk(KERN_WARNING "bttv%d: osprey eeprom: "
3897                        "Not overriding user specified card type\n", btv->c.nr);
3898         } else {
3899                 printk(KERN_INFO "bttv%d: osprey eeprom: "
3900                        "Changing card type from %d to %d\n", btv->c.nr,
3901                        btv->c.type, cardid);
3902                 btv->c.type = cardid;
3903         }
3904 }
3905
3906 /* ----------------------------------------------------------------------- */
3907 /* AVermedia specific stuff, from  bktr_card.c                             */
3908
3909 static int tuner_0_table[] = {
3910         TUNER_PHILIPS_NTSC,  TUNER_PHILIPS_PAL /* PAL-BG*/,
3911         TUNER_PHILIPS_PAL,   TUNER_PHILIPS_PAL /* PAL-I*/,
3912         TUNER_PHILIPS_PAL,   TUNER_PHILIPS_PAL,
3913         TUNER_PHILIPS_SECAM, TUNER_PHILIPS_SECAM,
3914         TUNER_PHILIPS_SECAM, TUNER_PHILIPS_PAL,
3915         TUNER_PHILIPS_FM1216ME_MK3 };
3916
3917 static int tuner_1_table[] = {
3918         TUNER_TEMIC_NTSC,  TUNER_TEMIC_PAL,
3919         TUNER_TEMIC_PAL,   TUNER_TEMIC_PAL,
3920         TUNER_TEMIC_PAL,   TUNER_TEMIC_PAL,
3921         TUNER_TEMIC_4012FY5, TUNER_TEMIC_4012FY5, /* TUNER_TEMIC_SECAM */
3922         TUNER_TEMIC_4012FY5, TUNER_TEMIC_PAL};
3923
3924 static void __devinit avermedia_eeprom(struct bttv *btv)
3925 {
3926         int tuner_make, tuner_tv_fm, tuner_format, tuner_type = 0;
3927
3928         tuner_make      = (eeprom_data[0x41] & 0x7);
3929         tuner_tv_fm     = (eeprom_data[0x41] & 0x18) >> 3;
3930         tuner_format    = (eeprom_data[0x42] & 0xf0) >> 4;
3931         btv->has_remote = (eeprom_data[0x42] & 0x01);
3932
3933         if (tuner_make == 0 || tuner_make == 2)
3934                 if (tuner_format <= 0x0a)
3935                         tuner_type = tuner_0_table[tuner_format];
3936         if (tuner_make == 1)
3937                 if (tuner_format <= 9)
3938                         tuner_type = tuner_1_table[tuner_format];
3939
3940         if (tuner_make == 4)
3941                 if (tuner_format == 0x09)
3942                         tuner_type = TUNER_LG_NTSC_NEW_TAPC; /* TAPC-G702P */
3943
3944         printk(KERN_INFO "bttv%d: Avermedia eeprom[0x%02x%02x]: tuner=",
3945                 btv->c.nr, eeprom_data[0x41], eeprom_data[0x42]);
3946         if (tuner_type) {
3947                 btv->tuner_type = tuner_type;
3948                 printk(KERN_CONT "%d", tuner_type);
3949         } else
3950                 printk(KERN_CONT "Unknown type");
3951         printk(KERN_CONT " radio:%s remote control:%s\n",
3952                tuner_tv_fm     ? "yes" : "no",
3953                btv->has_remote ? "yes" : "no");
3954 }
3955
3956 /*
3957  * For Voodoo TV/FM and Voodoo 200.  These cards' tuners use a TDA9880
3958  * analog demod, which is not I2C controlled like the newer and more common
3959  * TDA9887 series.  Instead is has two tri-state input pins, S0 and S1,
3960  * that control the IF for the video and audio.  Apparently, bttv GPIO
3961  * 0x10000 is connected to S0.  S0 low selects a 38.9 MHz VIF for B/G/D/K/I
3962  * (i.e., PAL) while high selects 45.75 MHz for M/N (i.e., NTSC).
3963  */
3964 u32 bttv_tda9880_setnorm(struct bttv *btv, u32 gpiobits)
3965 {
3966
3967         if (btv->audio == TVAUDIO_INPUT_TUNER) {
3968                 if (bttv_tvnorms[btv->tvnorm].v4l2_id & V4L2_STD_MN)
3969                         gpiobits |= 0x10000;
3970                 else
3971                         gpiobits &= ~0x10000;
3972         }
3973
3974         gpio_bits(bttv_tvcards[btv->c.type].gpiomask, gpiobits);
3975         return gpiobits;
3976 }
3977
3978
3979 /*
3980  * reset/enable the MSP on some Hauppauge cards
3981  * Thanks to Kyösti Mälkki (kmalkki@cc.hut.fi)!
3982  *
3983  * Hauppauge:  pin  5
3984  * Voodoo:     pin 20
3985  */
3986 static void __devinit boot_msp34xx(struct bttv *btv, int pin)
3987 {
3988         int mask = (1 << pin);
3989
3990         gpio_inout(mask,mask);
3991         gpio_bits(mask,0);
3992         mdelay(2);
3993         udelay(500);
3994         gpio_bits(mask,mask);
3995
3996         if (bttv_gpio)
3997                 bttv_gpio_tracking(btv,"msp34xx");
3998         if (bttv_verbose)
3999                 printk(KERN_INFO "bttv%d: Hauppauge/Voodoo msp34xx: reset line "
4000                        "init [%d]\n", btv->c.nr, pin);
4001 }
4002
4003 /* ----------------------------------------------------------------------- */
4004 /*  Imagenation L-Model PXC200 Framegrabber */
4005 /*  This is basically the same procedure as
4006  *  used by Alessandro Rubini in his pxc200
4007  *  driver, but using BTTV functions */
4008
4009 static void __devinit init_PXC200(struct bttv *btv)
4010 {
4011         static int vals[] __devinitdata = { 0x08, 0x09, 0x0a, 0x0b, 0x0d, 0x0d,
4012                                             0x01, 0x02, 0x03, 0x04, 0x05, 0x06,
4013                                             0x00 };
4014         unsigned int i;
4015         int tmp;
4016         u32 val;
4017
4018         /* Initialise GPIO-connevted stuff */
4019         gpio_inout(0xffffff, (1<<13));
4020         gpio_write(0);
4021         udelay(3);
4022         gpio_write(1<<13);
4023         /* GPIO inputs are pulled up, so no need to drive
4024          * reset pin any longer */
4025         gpio_bits(0xffffff, 0);
4026         if (bttv_gpio)
4027                 bttv_gpio_tracking(btv,"pxc200");
4028
4029         /*  we could/should try and reset/control the AD pots? but
4030             right now  we simply  turned off the crushing.  Without
4031             this the AGC drifts drifts
4032             remember the EN is reverse logic -->
4033             setting BT848_ADC_AGC_EN disable the AGC
4034             tboult@eecs.lehigh.edu
4035         */
4036
4037         btwrite(BT848_ADC_RESERVED|BT848_ADC_AGC_EN, BT848_ADC);
4038
4039         /*      Initialise MAX517 DAC */
4040         printk(KERN_INFO "Setting DAC reference voltage level ...\n");
4041         bttv_I2CWrite(btv,0x5E,0,0x80,1);
4042
4043         /*      Initialise 12C508 PIC */
4044         /*      The I2CWrite and I2CRead commmands are actually to the
4045          *      same chips - but the R/W bit is included in the address
4046          *      argument so the numbers are different */
4047
4048
4049         printk(KERN_INFO "Initialising 12C508 PIC chip ...\n");
4050
4051         /* First of all, enable the clock line. This is used in the PXC200-F */
4052         val = btread(BT848_GPIO_DMA_CTL);
4053         val |= BT848_GPIO_DMA_CTL_GPCLKMODE;
4054         btwrite(val, BT848_GPIO_DMA_CTL);
4055
4056         /* Then, push to 0 the reset pin long enough to reset the *
4057          * device same as above for the reset line, but not the same
4058          * value sent to the GPIO-connected stuff
4059          * which one is the good one? */
4060         gpio_inout(0xffffff,(1<<2));
4061         gpio_write(0);
4062         udelay(10);
4063         gpio_write(1<<2);
4064
4065         for (i = 0; i < ARRAY_SIZE(vals); i++) {
4066                 tmp=bttv_I2CWrite(btv,0x1E,0,vals[i],1);
4067                 if (tmp != -1) {
4068                         printk(KERN_INFO
4069                                "I2C Write(%2.2x) = %i\nI2C Read () = %2.2x\n\n",
4070                                vals[i],tmp,bttv_I2CRead(btv,0x1F,NULL));
4071                 }
4072         }
4073
4074         printk(KERN_INFO "PXC200 Initialised.\n");
4075 }
4076
4077
4078
4079 /* ----------------------------------------------------------------------- */
4080 /*
4081  *  The Adlink RTV-24 (aka Angelo) has some special initialisation to unlock
4082  *  it. This apparently involves the following procedure for each 878 chip:
4083  *
4084  *  1) write 0x00C3FEFF to the GPIO_OUT_EN register
4085  *
4086  *  2)  write to GPIO_DATA
4087  *      - 0x0E
4088  *      - sleep 1ms
4089  *      - 0x10 + 0x0E
4090  *      - sleep 10ms
4091  *      - 0x0E
4092  *     read from GPIO_DATA into buf (uint_32)
4093  *      - if ( data>>18 & 0x01 != 0) || ( buf>>19 & 0x01 != 1 )
4094  *                 error. ERROR_CPLD_Check_Failed stop.
4095  *
4096  *  3) write to GPIO_DATA
4097  *      - write 0x4400 + 0x0E
4098  *      - sleep 10ms
4099  *      - write 0x4410 + 0x0E
4100  *      - sleep 1ms
4101  *      - write 0x0E
4102  *     read from GPIO_DATA into buf (uint_32)
4103  *      - if ( buf>>18 & 0x01 ) || ( buf>>19 & 0x01 != 0 )
4104  *                error. ERROR_CPLD_Check_Failed.
4105  */
4106 /* ----------------------------------------------------------------------- */
4107 static void
4108 init_RTV24 (struct bttv *btv)
4109 {
4110         uint32_t dataRead = 0;
4111         long watchdog_value = 0x0E;
4112
4113         printk (KERN_INFO
4114                 "bttv%d: Adlink RTV-24 initialisation in progress ...\n",
4115                 btv->c.nr);
4116
4117         btwrite (0x00c3feff, BT848_GPIO_OUT_EN);
4118
4119         btwrite (0 + watchdog_value, BT848_GPIO_DATA);
4120         msleep (1);
4121         btwrite (0x10 + watchdog_value, BT848_GPIO_DATA);
4122         msleep (10);
4123         btwrite (0 + watchdog_value, BT848_GPIO_DATA);
4124
4125         dataRead = btread (BT848_GPIO_DATA);
4126
4127         if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 1)) {
4128                 printk (KERN_INFO
4129                         "bttv%d: Adlink RTV-24 initialisation(1) ERROR_CPLD_Check_Failed (read %d)\n",
4130                         btv->c.nr, dataRead);
4131         }
4132
4133         btwrite (0x4400 + watchdog_value, BT848_GPIO_DATA);
4134         msleep (10);
4135         btwrite (0x4410 + watchdog_value, BT848_GPIO_DATA);
4136         msleep (1);
4137         btwrite (watchdog_value, BT848_GPIO_DATA);
4138         msleep (1);
4139         dataRead = btread (BT848_GPIO_DATA);
4140
4141         if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 0)) {
4142                 printk (KERN_INFO
4143                         "bttv%d: Adlink RTV-24 initialisation(2) ERROR_CPLD_Check_Failed (read %d)\n",
4144                         btv->c.nr, dataRead);
4145
4146                 return;
4147         }
4148
4149         printk (KERN_INFO
4150                 "bttv%d: Adlink RTV-24 initialisation complete.\n", btv->c.nr);
4151 }
4152
4153
4154
4155 /* ----------------------------------------------------------------------- */
4156 /* Miro Pro radio stuff -- the tea5757 is connected to some GPIO ports     */
4157 /*
4158  * Copyright (c) 1999 Csaba Halasz <qgehali@uni-miskolc.hu>
4159  * This code is placed under the terms of the GNU General Public License
4160  *
4161  * Brutally hacked by Dan Sheridan <dan.sheridan@contact.org.uk> djs52 8/3/00
4162  */
4163
4164 static void bus_low(struct bttv *btv, int bit)
4165 {
4166         if (btv->mbox_ior) {
4167                 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4168                           btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4169                 udelay(5);
4170         }
4171
4172         gpio_bits(bit,0);
4173         udelay(5);
4174
4175         if (btv->mbox_ior) {
4176                 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
4177                 udelay(5);
4178         }
4179 }
4180
4181 static void bus_high(struct bttv *btv, int bit)
4182 {
4183         if (btv->mbox_ior) {
4184                 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4185                           btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4186                 udelay(5);
4187         }
4188
4189         gpio_bits(bit,bit);
4190         udelay(5);
4191
4192         if (btv->mbox_ior) {
4193                 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
4194                 udelay(5);
4195         }
4196 }
4197
4198 static int bus_in(struct bttv *btv, int bit)
4199 {
4200         if (btv->mbox_ior) {
4201                 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4202                           btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4203                 udelay(5);
4204
4205                 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
4206                 udelay(5);
4207         }
4208         return gpio_read() & (bit);
4209 }
4210
4211 /* TEA5757 register bits */
4212 #define TEA_FREQ                0:14
4213 #define TEA_BUFFER              15:15
4214
4215 #define TEA_SIGNAL_STRENGTH     16:17
4216
4217 #define TEA_PORT1               18:18
4218 #define TEA_PORT0               19:19
4219
4220 #define TEA_BAND                20:21
4221 #define TEA_BAND_FM             0
4222 #define TEA_BAND_MW             1
4223 #define TEA_BAND_LW             2
4224 #define TEA_BAND_SW             3
4225
4226 #define TEA_MONO                22:22
4227 #define TEA_ALLOW_STEREO        0
4228 #define TEA_FORCE_MONO          1
4229
4230 #define TEA_SEARCH_DIRECTION    23:23
4231 #define TEA_SEARCH_DOWN         0
4232 #define TEA_SEARCH_UP           1
4233
4234 #define TEA_STATUS              24:24
4235 #define TEA_STATUS_TUNED        0
4236 #define TEA_STATUS_SEARCHING    1
4237
4238 /* Low-level stuff */
4239 static int tea5757_read(struct bttv *btv)
4240 {
4241         unsigned long timeout;
4242         int value = 0;
4243         int i;
4244
4245         /* better safe than sorry */
4246         gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we);
4247
4248         if (btv->mbox_ior) {
4249                 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4250                           btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4251                 udelay(5);
4252         }
4253
4254         if (bttv_gpio)
4255                 bttv_gpio_tracking(btv,"tea5757 read");
4256
4257         bus_low(btv,btv->mbox_we);
4258         bus_low(btv,btv->mbox_clk);
4259
4260         udelay(10);
4261         timeout= jiffies + msecs_to_jiffies(1000);
4262
4263         /* wait for DATA line to go low; error if it doesn't */
4264         while (bus_in(btv,btv->mbox_data) && time_before(jiffies, timeout))
4265                 schedule();
4266         if (bus_in(btv,btv->mbox_data)) {
4267                 printk(KERN_WARNING "bttv%d: tea5757: read timeout\n",btv->c.nr);
4268                 return -1;
4269         }
4270
4271         dprintk("bttv%d: tea5757:",btv->c.nr);
4272         for (i = 0; i < 24; i++) {
4273                 udelay(5);
4274                 bus_high(btv,btv->mbox_clk);
4275                 udelay(5);
4276                 dprintk("%c",(bus_in(btv,btv->mbox_most) == 0)?'T':'-');
4277                 bus_low(btv,btv->mbox_clk);
4278                 value <<= 1;
4279                 value |= (bus_in(btv,btv->mbox_data) == 0)?0:1;  /* MSB first */
4280                 dprintk("%c", (bus_in(btv,btv->mbox_most) == 0)?'S':'M');
4281         }
4282         dprintk("\nbttv%d: tea5757: read 0x%X\n", btv->c.nr, value);
4283         return value;
4284 }
4285
4286 static int tea5757_write(struct bttv *btv, int value)
4287 {
4288         int i;
4289         int reg = value;
4290
4291         gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we | btv->mbox_data);
4292
4293         if (btv->mbox_ior) {
4294                 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4295                           btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4296                 udelay(5);
4297         }
4298         if (bttv_gpio)
4299                 bttv_gpio_tracking(btv,"tea5757 write");
4300
4301         dprintk("bttv%d: tea5757: write 0x%X\n", btv->c.nr, value);
4302         bus_low(btv,btv->mbox_clk);
4303         bus_high(btv,btv->mbox_we);
4304         for (i = 0; i < 25; i++) {
4305                 if (reg & 0x1000000)
4306                         bus_high(btv,btv->mbox_data);
4307                 else
4308                         bus_low(btv,btv->mbox_data);
4309                 reg <<= 1;
4310                 bus_high(btv,btv->mbox_clk);
4311                 udelay(10);
4312                 bus_low(btv,btv->mbox_clk);
4313                 udelay(10);
4314         }
4315         bus_low(btv,btv->mbox_we);  /* unmute !!! */
4316         return 0;
4317 }
4318
4319 void tea5757_set_freq(struct bttv *btv, unsigned short freq)
4320 {
4321         dprintk("tea5757_set_freq %d\n",freq);
4322         tea5757_write(btv, 5 * freq + 0x358); /* add 10.7MHz (see docs) */
4323 }
4324
4325 /* RemoteVision MX (rv605) muxsel helper [Miguel Freitas]
4326  *
4327  * This is needed because rv605 don't use a normal multiplex, but a crosspoint
4328  * switch instead (CD22M3494E). This IC can have multiple active connections
4329  * between Xn (input) and Yn (output) pins. We need to clear any existing
4330  * connection prior to establish a new one, pulsing the STROBE pin.
4331  *
4332  * The board hardwire Y0 (xpoint) to MUX1 and MUXOUT to Yin.
4333  * GPIO pins are wired as:
4334  *  GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroller)
4335  *  GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroller)
4336  *  GPIO[7]   - DATA (xpoint)    - P1[7] (microcontroller)
4337  *  GPIO[8]   -                  - P3[5] (microcontroller)
4338  *  GPIO[9]   - RESET (xpoint)   - P3[6] (microcontroller)
4339  *  GPIO[10]  - STROBE (xpoint)  - P3[7] (microcontroller)
4340  *  GPINTR    -                  - P3[4] (microcontroller)
4341  *
4342  * The microcontroller is a 80C32 like. It should be possible to change xpoint
4343  * configuration either directly (as we are doing) or using the microcontroller
4344  * which is also wired to I2C interface. I have no further info on the
4345  * microcontroller features, one would need to disassembly the firmware.
4346  * note: the vendor refused to give any information on this product, all
4347  *       that stuff was found using a multimeter! :)
4348  */
4349 static void rv605_muxsel(struct bttv *btv, unsigned int input)
4350 {
4351         static const u8 muxgpio[] = { 0x3, 0x1, 0x2, 0x4, 0xf, 0x7, 0xe, 0x0,
4352                                       0xd, 0xb, 0xc, 0x6, 0x9, 0x5, 0x8, 0xa };
4353
4354         gpio_bits(0x07f, muxgpio[input]);
4355
4356         /* reset all conections */
4357         gpio_bits(0x200,0x200);
4358         mdelay(1);
4359         gpio_bits(0x200,0x000);
4360         mdelay(1);
4361
4362         /* create a new connection */
4363         gpio_bits(0x480,0x480);
4364         mdelay(1);
4365         gpio_bits(0x480,0x080);
4366         mdelay(1);
4367 }
4368
4369 /* Tibet Systems 'Progress DVR' CS16 muxsel helper [Chris Fanning]
4370  *
4371  * The CS16 (available on eBay cheap) is a PCI board with four Fusion
4372  * 878A chips, a PCI bridge, an Atmel microcontroller, four sync separator
4373  * chips, ten eight input analog multiplexors, a not chip and a few
4374  * other components.
4375  *
4376  * 16 inputs on a secondary bracket are provided and can be selected
4377  * from each of the four capture chips.  Two of the eight input
4378  * multiplexors are used to select from any of the 16 input signals.
4379  *
4380  * Unsupported hardware capabilities:
4381  *  . A video output monitor on the secondary bracket can be selected from
4382  *    one of the 878A chips.
4383  *  . Another passthrough but I haven't spent any time investigating it.
4384  *  . Digital I/O (logic level connected to GPIO) is available from an
4385  *    onboard header.
4386  *
4387  * The on chip input mux should always be set to 2.
4388  * GPIO[16:19] - Video input selection
4389  * GPIO[0:3]   - Video output monitor select (only available from one 878A)
4390  * GPIO[?:?]   - Digital I/O.
4391  *
4392  * There is an ATMEL microcontroller with an 8031 core on board.  I have not
4393  * determined what function (if any) it provides.  With the microcontroller
4394  * and sync separator chips a guess is that it might have to do with video
4395  * switching and maybe some digital I/O.
4396  */
4397 static void tibetCS16_muxsel(struct bttv *btv, unsigned int input)
4398 {
4399         /* video mux */
4400         gpio_bits(0x0f0000, input << 16);
4401 }
4402
4403 static void tibetCS16_init(struct bttv *btv)
4404 {
4405         /* enable gpio bits, mask obtained via btSpy */
4406         gpio_inout(0xffffff, 0x0f7fff);
4407         gpio_write(0x0f7fff);
4408 }
4409
4410 /*
4411  * The following routines for the Kodicom-4400r get a little mind-twisting.
4412  * There is a "master" controller and three "slave" controllers, together
4413  * an analog switch which connects any of 16 cameras to any of the BT87A's.
4414  * The analog switch is controlled by the "master", but the detection order
4415  * of the four BT878A chips is in an order which I just don't understand.
4416  * The "master" is actually the second controller to be detected.  The
4417  * logic on the board uses logical numbers for the 4 controllers, but
4418  * those numbers are different from the detection sequence.  When working
4419  * with the analog switch, we need to "map" from the detection sequence
4420  * over to the board's logical controller number.  This mapping sequence
4421  * is {3, 0, 2, 1}, i.e. the first controller to be detected is logical
4422  * unit 3, the second (which is the master) is logical unit 0, etc.
4423  * We need to maintain the status of the analog switch (which of the 16
4424  * cameras is connected to which of the 4 controllers).  Rather than
4425  * add to the bttv structure for this, we use the data reserved for
4426  * the mbox (unused for this card type).
4427  */
4428
4429 /*
4430  * First a routine to set the analog switch, which controls which camera
4431  * is routed to which controller.  The switch comprises an X-address
4432  * (gpio bits 0-3, representing the camera, ranging from 0-15), and a
4433  * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3).
4434  * A data value (gpio bit 7) of '1' enables the switch, and '0' disables
4435  * the switch.  A STROBE bit (gpio bit 8) latches the data value into the
4436  * specified address.  The idea is to set the address and data, then bring
4437  * STROBE high, and finally bring STROBE back to low.
4438  */
4439 static void kodicom4400r_write(struct bttv *btv,
4440                                unsigned char xaddr,
4441                                unsigned char yaddr,
4442                                unsigned char data) {
4443         unsigned int udata;
4444
4445         udata = (data << 7) | ((yaddr&3) << 4) | (xaddr&0xf);
4446         gpio_bits(0x1ff, udata);                /* write ADDR and DAT */
4447         gpio_bits(0x1ff, udata | (1 << 8));     /* strobe high */
4448         gpio_bits(0x1ff, udata);                /* strobe low */
4449 }
4450
4451 /*
4452  * Next the mux select.  Both the "master" and "slave" 'cards' (controllers)
4453  * use this routine.  The routine finds the "master" for the card, maps
4454  * the controller number from the detected position over to the logical
4455  * number, writes the appropriate data to the analog switch, and housekeeps
4456  * the local copy of the switch information.  The parameter 'input' is the
4457  * requested camera number (0 - 15).
4458  */
4459 static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input)
4460 {
4461         char *sw_status;
4462         int xaddr, yaddr;
4463         struct bttv *mctlr;
4464         static unsigned char map[4] = {3, 0, 2, 1};
4465
4466         mctlr = master[btv->c.nr];
4467         if (mctlr == NULL) {    /* ignore if master not yet detected */
4468                 return;
4469         }
4470         yaddr = (btv->c.nr - mctlr->c.nr + 1) & 3; /* the '&' is for safety */
4471         yaddr = map[yaddr];
4472         sw_status = (char *)(&mctlr->mbox_we);
4473         xaddr = input & 0xf;
4474         /* Check if the controller/camera pair has changed, else ignore */
4475         if (sw_status[yaddr] != xaddr)
4476         {
4477                 /* "open" the old switch, "close" the new one, save the new */
4478                 kodicom4400r_write(mctlr, sw_status[yaddr], yaddr, 0);
4479                 sw_status[yaddr] = xaddr;
4480                 kodicom4400r_write(mctlr, xaddr, yaddr, 1);
4481         }
4482 }
4483
4484 /*
4485  * During initialisation, we need to reset the analog switch.  We
4486  * also preset the switch to map the 4 connectors on the card to the
4487  * *user's* (see above description of kodicom4400r_muxsel) channels
4488  * 0 through 3
4489  */
4490 static void kodicom4400r_init(struct bttv *btv)
4491 {
4492         char *sw_status = (char *)(&btv->mbox_we);
4493         int ix;
4494
4495         gpio_inout(0x0003ff, 0x0003ff);
4496         gpio_write(1 << 9);     /* reset MUX */
4497         gpio_write(0);
4498         /* Preset camera 0 to the 4 controllers */
4499         for (ix = 0; ix < 4; ix++) {
4500                 sw_status[ix] = ix;
4501                 kodicom4400r_write(btv, ix, ix, 1);
4502         }
4503         /*
4504          * Since this is the "master", we need to set up the
4505          * other three controller chips' pointers to this structure
4506          * for later use in the muxsel routine.
4507          */
4508         if ((btv->c.nr<1) || (btv->c.nr>BTTV_MAX-3))
4509             return;
4510         master[btv->c.nr-1] = btv;
4511         master[btv->c.nr]   = btv;
4512         master[btv->c.nr+1] = btv;
4513         master[btv->c.nr+2] = btv;
4514 }
4515
4516 /* The Grandtec X-Guard framegrabber card uses two Dual 4-channel
4517  * video multiplexers to provide up to 16 video inputs. These
4518  * multiplexers are controlled by the lower 8 GPIO pins of the
4519  * bt878. The multiplexers probably Pericom PI5V331Q or similar.
4520
4521  * xxx0 is pin xxx of multiplexer U5,
4522  * yyy1 is pin yyy of multiplexer U2
4523  */
4524 #define ENA0    0x01
4525 #define ENB0    0x02
4526 #define ENA1    0x04
4527 #define ENB1    0x08
4528
4529 #define IN10    0x10
4530 #define IN00    0x20
4531 #define IN11    0x40
4532 #define IN01    0x80
4533
4534 static void xguard_muxsel(struct bttv *btv, unsigned int input)
4535 {
4536         static const int masks[] = {
4537                 ENB0, ENB0|IN00, ENB0|IN10, ENB0|IN00|IN10,
4538                 ENA0, ENA0|IN00, ENA0|IN10, ENA0|IN00|IN10,
4539                 ENB1, ENB1|IN01, ENB1|IN11, ENB1|IN01|IN11,
4540                 ENA1, ENA1|IN01, ENA1|IN11, ENA1|IN01|IN11,
4541         };
4542         gpio_write(masks[input%16]);
4543 }
4544 static void picolo_tetra_init(struct bttv *btv)
4545 {
4546         /*This is the video input redirection fonctionality : I DID NOT USED IT. */
4547         btwrite (0x08<<16,BT848_GPIO_DATA);/*GPIO[19] [==> 4053 B+C] set to 1 */
4548         btwrite (0x04<<16,BT848_GPIO_DATA);/*GPIO[18] [==> 4053 A]  set to 1*/
4549 }
4550 static void picolo_tetra_muxsel (struct bttv* btv, unsigned int input)
4551 {
4552
4553         dprintk (KERN_DEBUG "bttv%d : picolo_tetra_muxsel =>  input = %d\n",btv->c.nr,input);
4554         /*Just set the right path in the analog multiplexers : channel 1 -> 4 ==> Analog Mux ==> MUX0*/
4555         /*GPIO[20]&GPIO[21] used to choose the right input*/
4556         btwrite (input<<20,BT848_GPIO_DATA);
4557
4558 }
4559
4560 /*
4561  * ivc120_muxsel [Added by Alan Garfield <alan@fromorbit.com>]
4562  *
4563  * The IVC120G security card has 4 i2c controlled TDA8540 matrix
4564  * swichers to provide 16 channels to MUX0. The TDA8540's have
4565  * 4 independent outputs and as such the IVC120G also has the
4566  * optional "Monitor Out" bus. This allows the card to be looking
4567  * at one input while the monitor is looking at another.
4568  *
4569  * Since I've couldn't be bothered figuring out how to add an
4570  * independant muxsel for the monitor bus, I've just set it to
4571  * whatever the card is looking at.
4572  *
4573  *  OUT0 of the TDA8540's is connected to MUX0         (0x03)
4574  *  OUT1 of the TDA8540's is connected to "Monitor Out"        (0x0C)
4575  *
4576  *  TDA8540_ALT3 IN0-3 = Channel 13 - 16       (0x03)
4577  *  TDA8540_ALT4 IN0-3 = Channel 1 - 4         (0x03)
4578  *  TDA8540_ALT5 IN0-3 = Channel 5 - 8         (0x03)
4579  *  TDA8540_ALT6 IN0-3 = Channel 9 - 12                (0x03)
4580  *
4581  */
4582
4583 /* All 7 possible sub-ids for the TDA8540 Matrix Switcher */
4584 #define I2C_TDA8540        0x90
4585 #define I2C_TDA8540_ALT1   0x92
4586 #define I2C_TDA8540_ALT2   0x94
4587 #define I2C_TDA8540_ALT3   0x96
4588 #define I2C_TDA8540_ALT4   0x98
4589 #define I2C_TDA8540_ALT5   0x9a
4590 #define I2C_TDA8540_ALT6   0x9c
4591
4592 static void ivc120_muxsel(struct bttv *btv, unsigned int input)
4593 {
4594         /* Simple maths */
4595         int key = input % 4;
4596         int matrix = input / 4;
4597
4598         dprintk("bttv%d: ivc120_muxsel: Input - %02d | TDA - %02d | In - %02d\n",
4599                 btv->c.nr, input, matrix, key);
4600
4601         /* Handles the input selection on the TDA8540's */
4602         bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x00,
4603                       ((matrix == 3) ? (key | key << 2) : 0x00), 1);
4604         bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x00,
4605                       ((matrix == 0) ? (key | key << 2) : 0x00), 1);
4606         bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x00,
4607                       ((matrix == 1) ? (key | key << 2) : 0x00), 1);
4608         bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x00,
4609                       ((matrix == 2) ? (key | key << 2) : 0x00), 1);
4610
4611         /* Handles the output enables on the TDA8540's */
4612         bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x02,
4613                       ((matrix == 3) ? 0x03 : 0x00), 1);  /* 13 - 16 */
4614         bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x02,
4615                       ((matrix == 0) ? 0x03 : 0x00), 1);  /* 1-4 */
4616         bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x02,
4617                       ((matrix == 1) ? 0x03 : 0x00), 1);  /* 5-8 */
4618         bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x02,
4619                       ((matrix == 2) ? 0x03 : 0x00), 1);  /* 9-12 */
4620
4621         /* 878's MUX0 is already selected for input via muxsel values */
4622 }
4623
4624
4625 /* PXC200 muxsel helper
4626  * luke@syseng.anu.edu.au
4627  * another transplant
4628  * from Alessandro Rubini (rubini@linux.it)
4629  *
4630  * There are 4 kinds of cards:
4631  * PXC200L which is bt848
4632  * PXC200F which is bt848 with PIC controlling mux
4633  * PXC200AL which is bt878
4634  * PXC200AF which is bt878 with PIC controlling mux
4635  */
4636 #define PX_CFG_PXC200F 0x01
4637 #define PX_FLAG_PXC200A  0x00001000 /* a pxc200A is bt-878 based */
4638 #define PX_I2C_PIC       0x0f
4639 #define PX_PXC200A_CARDID 0x200a1295
4640 #define PX_I2C_CMD_CFG   0x00
4641
4642 static void PXC200_muxsel(struct bttv *btv, unsigned int input)
4643 {
4644         int rc;
4645         long mux;
4646         int bitmask;
4647         unsigned char buf[2];
4648
4649         /* Read PIC config to determine if this is a PXC200F */
4650         /* PX_I2C_CMD_CFG*/
4651         buf[0]=0;
4652         buf[1]=0;
4653         rc=bttv_I2CWrite(btv,(PX_I2C_PIC<<1),buf[0],buf[1],1);
4654         if (rc) {
4655           printk(KERN_DEBUG "bttv%d: PXC200_muxsel: pic cfg write failed:%d\n", btv->c.nr,rc);
4656           /* not PXC ? do nothing */
4657           return;
4658         }
4659
4660         rc=bttv_I2CRead(btv,(PX_I2C_PIC<<1),NULL);
4661         if (!(rc & PX_CFG_PXC200F)) {
4662           printk(KERN_DEBUG "bttv%d: PXC200_muxsel: not PXC200F rc:%d \n", btv->c.nr,rc);
4663           return;
4664         }
4665
4666
4667         /* The multiplexer in the 200F is handled by the GPIO port */
4668         /* get correct mapping between inputs  */
4669         /*  mux = bttv_tvcards[btv->type].muxsel[input] & 3; */
4670         /* ** not needed!?   */
4671         mux = input;
4672
4673         /* make sure output pins are enabled */
4674         /* bitmask=0x30f; */
4675         bitmask=0x302;
4676         /* check whether we have a PXC200A */
4677         if (btv->cardid == PX_PXC200A_CARDID)  {
4678            bitmask ^= 0x180; /* use 7 and 9, not 8 and 9 */
4679            bitmask |= 7<<4; /* the DAC */
4680         }
4681         btwrite(bitmask, BT848_GPIO_OUT_EN);
4682
4683         bitmask = btread(BT848_GPIO_DATA);
4684         if (btv->cardid == PX_PXC200A_CARDID)
4685           bitmask = (bitmask & ~0x280) | ((mux & 2) << 8) | ((mux & 1) << 7);
4686         else /* older device */
4687           bitmask = (bitmask & ~0x300) | ((mux & 3) << 8);
4688         btwrite(bitmask,BT848_GPIO_DATA);
4689
4690         /*
4691          * Was "to be safe, set the bt848 to input 0"
4692          * Actually, since it's ok at load time, better not messing
4693          * with these bits (on PXC200AF you need to set mux 2 here)
4694          *
4695          * needed because bttv-driver sets mux before calling this function
4696          */
4697         if (btv->cardid == PX_PXC200A_CARDID)
4698           btaor(2<<5, ~BT848_IFORM_MUXSEL, BT848_IFORM);
4699         else /* older device */
4700           btand(~BT848_IFORM_MUXSEL,BT848_IFORM);
4701
4702         printk(KERN_DEBUG "bttv%d: setting input channel to:%d\n", btv->c.nr,(int)mux);
4703 }
4704
4705 static void phytec_muxsel(struct bttv *btv, unsigned int input)
4706 {
4707         unsigned int mux = input % 4;
4708
4709         if (input == btv->svhs)
4710                 mux = 0;
4711
4712         gpio_bits(0x3, mux);
4713 }
4714
4715 /*
4716  * GeoVision GV-800(S) functions
4717  * Bruno Christo <bchristo@inf.ufsm.br>
4718 */
4719
4720 /* This is a function to control the analog switch, which determines which
4721  * camera is routed to which controller.  The switch comprises an X-address
4722  * (gpio bits 0-3, representing the camera, ranging from 0-15), and a
4723  * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3).
4724  * A data value (gpio bit 18) of '1' enables the switch, and '0' disables
4725  * the switch.  A STROBE bit (gpio bit 17) latches the data value into the
4726  * specified address. There is also a chip select (gpio bit 16).
4727  * The idea is to set the address and chip select together, bring
4728  * STROBE high, write the data, and finally bring STROBE back to low.
4729  */
4730 static void gv800s_write(struct bttv *btv,
4731                          unsigned char xaddr,
4732                          unsigned char yaddr,
4733                          unsigned char data) {
4734         /* On the "master" 878A:
4735         * GPIO bits 0-9 are used for the analog switch:
4736         *   00 - 03:    camera selector
4737         *   04 - 06:    878A (controller) selector
4738         *   16:         cselect
4739         *   17:         strobe
4740         *   18:         data (1->on, 0->off)
4741         *   19:         reset
4742         */
4743         const u32 ADDRESS = ((xaddr&0xf) | (yaddr&3)<<4);
4744         const u32 CSELECT = 1<<16;
4745         const u32 STROBE = 1<<17;
4746         const u32 DATA = data<<18;
4747
4748         gpio_bits(0x1007f, ADDRESS | CSELECT);  /* write ADDRESS and CSELECT */
4749         gpio_bits(0x20000, STROBE);             /* STROBE high */
4750         gpio_bits(0x40000, DATA);               /* write DATA */
4751         gpio_bits(0x20000, ~STROBE);            /* STROBE low */
4752 }
4753
4754 /*
4755  * GeoVision GV-800(S) muxsel
4756  *
4757  * Each of the 4 cards (controllers) use this function.
4758  * The controller using this function selects the input through the GPIO pins
4759  * of the "master" card. A pointer to this card is stored in master[btv->c.nr].
4760  *
4761  * The parameter 'input' is the requested camera number (0-4) on the controller.
4762  * The map array has the address of each input. Note that the addresses in the
4763  * array are in the sequence the original GeoVision driver uses, that is, set
4764  * every controller to input 0, then to input 1, 2, 3, repeat. This means that
4765  * the physical "camera 1" connector corresponds to controller 0 input 0,
4766  * "camera 2" corresponds to controller 1 input 0, and so on.
4767  *
4768  * After getting the input address, the function then writes the appropriate
4769  * data to the analog switch, and housekeeps the local copy of the switch
4770  * information.
4771  */
4772 static void gv800s_muxsel(struct bttv *btv, unsigned int input)
4773 {
4774         struct bttv *mctlr;
4775         char *sw_status;
4776         int xaddr, yaddr;
4777         static unsigned int map[4][4] = { { 0x0, 0x4, 0xa, 0x6 },
4778                                           { 0x1, 0x5, 0xb, 0x7 },
4779                                           { 0x2, 0x8, 0xc, 0xe },
4780                                           { 0x3, 0x9, 0xd, 0xf } };
4781         input = input%4;
4782         mctlr = master[btv->c.nr];
4783         if (mctlr == NULL) {
4784                 /* do nothing until the "master" is detected */
4785                 return;
4786         }
4787         yaddr = (btv->c.nr - mctlr->c.nr) & 3;
4788         sw_status = (char *)(&mctlr->mbox_we);
4789         xaddr = map[yaddr][input] & 0xf;
4790
4791         /* Check if the controller/camera pair has changed, ignore otherwise */
4792         if (sw_status[yaddr] != xaddr) {
4793                 /* disable the old switch, enable the new one and save status */
4794                 gv800s_write(mctlr, sw_status[yaddr], yaddr, 0);
4795                 sw_status[yaddr] = xaddr;
4796                 gv800s_write(mctlr, xaddr, yaddr, 1);
4797         }
4798 }
4799
4800 /* GeoVision GV-800(S) "master" chip init */
4801 static void gv800s_init(struct bttv *btv)
4802 {
4803         char *sw_status = (char *)(&btv->mbox_we);
4804         int ix;
4805
4806         gpio_inout(0xf107f, 0xf107f);
4807         gpio_write(1<<19); /* reset the analog MUX */
4808         gpio_write(0);
4809
4810         /* Preset camera 0 to the 4 controllers */
4811         for (ix = 0; ix < 4; ix++) {
4812                 sw_status[ix] = ix;
4813                 gv800s_write(btv, ix, ix, 1);
4814         }
4815
4816         /* Inputs on the "master" controller need this brightness fix */
4817         bttv_I2CWrite(btv, 0x18, 0x5, 0x90, 1);
4818
4819         if (btv->c.nr > BTTV_MAX-4)
4820                 return;
4821         /*
4822          * Store the "master" controller pointer in the master
4823          * array for later use in the muxsel function.
4824          */
4825         master[btv->c.nr]   = btv;
4826         master[btv->c.nr+1] = btv;
4827         master[btv->c.nr+2] = btv;
4828         master[btv->c.nr+3] = btv;
4829 }
4830
4831 /* ----------------------------------------------------------------------- */
4832 /* motherboard chipset specific stuff                                      */
4833
4834 void __init bttv_check_chipset(void)
4835 {
4836         int pcipci_fail = 0;
4837         struct pci_dev *dev = NULL;
4838
4839         if (pci_pci_problems & (PCIPCI_FAIL|PCIAGP_FAIL))       /* should check if target is AGP */
4840                 pcipci_fail = 1;
4841         if (pci_pci_problems & (PCIPCI_TRITON|PCIPCI_NATOMA|PCIPCI_VIAETBF))
4842                 triton1 = 1;
4843         if (pci_pci_problems & PCIPCI_VSFX)
4844                 vsfx = 1;
4845 #ifdef PCIPCI_ALIMAGIK
4846         if (pci_pci_problems & PCIPCI_ALIMAGIK)
4847                 latency = 0x0A;
4848 #endif
4849
4850
4851         /* print warnings about any quirks found */
4852         if (triton1)
4853                 printk(KERN_INFO "bttv: Host bridge needs ETBF enabled.\n");
4854         if (vsfx)
4855                 printk(KERN_INFO "bttv: Host bridge needs VSFX enabled.\n");
4856         if (pcipci_fail) {
4857                 printk(KERN_INFO "bttv: bttv and your chipset may not work "
4858                                                         "together.\n");
4859                 if (!no_overlay) {
4860                         printk(KERN_INFO "bttv: overlay will be disabled.\n");
4861                         no_overlay = 1;
4862                 } else {
4863                         printk(KERN_INFO "bttv: overlay forced. Use this "
4864                                                 "option at your own risk.\n");
4865                 }
4866         }
4867         if (UNSET != latency)
4868                 printk(KERN_INFO "bttv: pci latency fixup [%d]\n",latency);
4869         while ((dev = pci_get_device(PCI_VENDOR_ID_INTEL,
4870                                       PCI_DEVICE_ID_INTEL_82441, dev))) {
4871                 unsigned char b;
4872                 pci_read_config_byte(dev, 0x53, &b);
4873                 if (bttv_debug)
4874                         printk(KERN_INFO "bttv: Host bridge: 82441FX Natoma, "
4875                                "bufcon=0x%02x\n",b);
4876         }
4877 }
4878
4879 int __devinit bttv_handle_chipset(struct bttv *btv)
4880 {
4881         unsigned char command;
4882
4883         if (!triton1 && !vsfx && UNSET == latency)
4884                 return 0;
4885
4886         if (bttv_verbose) {
4887                 if (triton1)
4888                         printk(KERN_INFO "bttv%d: enabling ETBF (430FX/VP3 compatibilty)\n",btv->c.nr);
4889                 if (vsfx && btv->id >= 878)
4890                         printk(KERN_INFO "bttv%d: enabling VSFX\n",btv->c.nr);
4891                 if (UNSET != latency)
4892                         printk(KERN_INFO "bttv%d: setting pci timer to %d\n",
4893                                btv->c.nr,latency);
4894         }
4895
4896         if (btv->id < 878) {
4897                 /* bt848 (mis)uses a bit in the irq mask for etbf */
4898                 if (triton1)
4899                         btv->triton1 = BT848_INT_ETBF;
4900         } else {
4901                 /* bt878 has a bit in the pci config space for it */
4902                 pci_read_config_byte(btv->c.pci, BT878_DEVCTRL, &command);
4903                 if (triton1)
4904                         command |= BT878_EN_TBFX;
4905                 if (vsfx)
4906                         command |= BT878_EN_VSFX;
4907                 pci_write_config_byte(btv->c.pci, BT878_DEVCTRL, command);
4908         }
4909         if (UNSET != latency)
4910                 pci_write_config_byte(btv->c.pci, PCI_LATENCY_TIMER, latency);
4911         return 0;
4912 }
4913
4914
4915 /*
4916  * Local variables:
4917  * c-basic-offset: 8
4918  * End:
4919  */