drivers/media/dvb/ttpci/budget-av.c

   1 /*
   2  * budget-av.c: driver for the SAA7146 based Budget DVB cards
   3  *              with analog video in
   4  *
   5  * Compiled from various sources by Michael Hunold <michael@mihu.de>
   6  *
   7  * CI interface support (c) 2004 Olivier Gournet <ogournet@anevia.com> &
   8  *                               Andrew de Quincey <adq_dvb@lidskialf.net>
   9  *
  10  * Copyright (C) 2002 Ralph Metzler <rjkm@metzlerbros.de>
  11  *
  12  * Copyright (C) 1999-2002 Ralph  Metzler
  13  *                       & Marcus Metzler for convergence integrated media GmbH
  14  *
  15  * This program is free software; you can redistribute it and/or
  16  * modify it under the terms of the GNU General Public License
  17  * as published by the Free Software Foundation; either version 2
  18  * of the License, or (at your option) any later version.
  19  *
  20  *
  21  * This program is distributed in the hope that it will be useful,
  22  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  23  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  24  * GNU General Public License for more details.
  25  *
  26  *
  27  * You should have received a copy of the GNU General Public License
  28  * along with this program; if not, write to the Free Software
  29  * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  30  * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
  31  *
  32  *
  33  * the project's page is at http://www.linuxtv.org/dvb/
  34  */
  35
  36 #include "budget.h"
  37 #include "stv0299.h"
  38 #include "tda1002x.h"
  39 #include "tda1004x.h"
  40 #include "tua6100.h"
  41 #include "dvb-pll.h"
  42 #include <media/saa7146_vv.h>
  43 #include <linux/module.h>
  44 #include <linux/errno.h>
  45 #include <linux/slab.h>
  46 #include <linux/interrupt.h>
  47 #include <linux/input.h>
  48 #include <linux/spinlock.h>
  49
  50 #include "dvb_ca_en50221.h"
  51
  52 #define DEBICICAM               0x02420000
  53
  54 #define SLOTSTATUS_NONE         1
  55 #define SLOTSTATUS_PRESENT      2
  56 #define SLOTSTATUS_RESET        4
  57 #define SLOTSTATUS_READY        8
  58 #define SLOTSTATUS_OCCUPIED     (SLOTSTATUS_PRESENT|SLOTSTATUS_RESET|SLOTSTATUS_READY)
  59
  60 struct budget_av {
  61         struct budget budget;
  62         struct video_device *vd;
  63         int cur_input;
  64         int has_saa7113;
  65         struct tasklet_struct ciintf_irq_tasklet;
  66         int slot_status;
  67         struct dvb_ca_en50221 ca;
  68         u8 reinitialise_demod:1;
  69 };
  70
  71 static int ciintf_slot_shutdown(struct dvb_ca_en50221 *ca, int slot);
  72
  73
  74 /* GPIO Connections:
  75  * 0 - Vcc/Reset (Reset is controlled by capacitor). Resets the frontend *AS WELL*!
  76  * 1 - CI memory select 0=>IO memory, 1=>Attribute Memory
  77  * 2 - CI Card Enable (Active Low)
  78  * 3 - CI Card Detect
  79  */
  80
  81 /****************************************************************************
  82  * INITIALIZATION
  83  ****************************************************************************/
  84
  85 static u8 i2c_readreg(struct i2c_adapter *i2c, u8 id, u8 reg)
  86 {
  87         u8 mm1[] = { 0x00 };
  88         u8 mm2[] = { 0x00 };
  89         struct i2c_msg msgs[2];
  90
  91         msgs[0].flags = 0;
  92         msgs[1].flags = I2C_M_RD;
  93         msgs[0].addr = msgs[1].addr = id / 2;
  94         mm1[0] = reg;
  95         msgs[0].len = 1;
  96         msgs[1].len = 1;
  97         msgs[0].buf = mm1;
  98         msgs[1].buf = mm2;
  99
 100         i2c_transfer(i2c, msgs, 2);
 101
 102         return mm2[0];
 103 }
 104
 105 static int i2c_readregs(struct i2c_adapter *i2c, u8 id, u8 reg, u8 * buf, u8 len)
 106 {
 107         u8 mm1[] = { reg };
 108         struct i2c_msg msgs[2] = {
 109                 {.addr = id / 2,.flags = 0,.buf = mm1,.len = 1},
 110                 {.addr = id / 2,.flags = I2C_M_RD,.buf = buf,.len = len}
 111         };
 112
 113         if (i2c_transfer(i2c, msgs, 2) != 2)
 114                 return -EIO;
 115
 116         return 0;
 117 }
 118
 119 static int i2c_writereg(struct i2c_adapter *i2c, u8 id, u8 reg, u8 val)
 120 {
 121         u8 msg[2] = { reg, val };
 122         struct i2c_msg msgs;
 123
 124         msgs.flags = 0;
 125         msgs.addr = id / 2;
 126         msgs.len = 2;
 127         msgs.buf = msg;
 128         return i2c_transfer(i2c, &msgs, 1);
 129 }
 130
 131 static int ciintf_read_attribute_mem(struct dvb_ca_en50221 *ca, int slot, int address)
 132 {
 133         struct budget_av *budget_av = (struct budget_av *) ca->data;
 134         int result;
 135
 136         if (slot != 0)
 137                 return -EINVAL;
 138
 139         saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTHI);
 140         udelay(1);
 141
 142         result = ttpci_budget_debiread(&budget_av->budget, DEBICICAM, address & 0xfff, 1, 0, 1);
 143         if (result == -ETIMEDOUT) {
 144                 ciintf_slot_shutdown(ca, slot);
 145                 printk(KERN_INFO "budget-av: cam ejected 1\n");
 146         }
 147         return result;
 148 }
 149
 150 static int ciintf_write_attribute_mem(struct dvb_ca_en50221 *ca, int slot, int address, u8 value)
 151 {
 152         struct budget_av *budget_av = (struct budget_av *) ca->data;
 153         int result;
 154
 155         if (slot != 0)
 156                 return -EINVAL;
 157
 158         saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTHI);
 159         udelay(1);
 160
 161         result = ttpci_budget_debiwrite(&budget_av->budget, DEBICICAM, address & 0xfff, 1, value, 0, 1);
 162         if (result == -ETIMEDOUT) {
 163                 ciintf_slot_shutdown(ca, slot);
 164                 printk(KERN_INFO "budget-av: cam ejected 2\n");
 165         }
 166         return result;
 167 }
 168
 169 static int ciintf_read_cam_control(struct dvb_ca_en50221 *ca, int slot, u8 address)
 170 {
 171         struct budget_av *budget_av = (struct budget_av *) ca->data;
 172         int result;
 173
 174         if (slot != 0)
 175                 return -EINVAL;
 176
 177         saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTLO);
 178         udelay(1);
 179
 180         result = ttpci_budget_debiread(&budget_av->budget, DEBICICAM, address & 3, 1, 0, 0);
 181         if (result == -ETIMEDOUT) {
 182                 ciintf_slot_shutdown(ca, slot);
 183                 printk(KERN_INFO "budget-av: cam ejected 3\n");
 184                 return -ETIMEDOUT;
 185         }
 186         return result;
 187 }
 188
 189 static int ciintf_write_cam_control(struct dvb_ca_en50221 *ca, int slot, u8 address, u8 value)
 190 {
 191         struct budget_av *budget_av = (struct budget_av *) ca->data;
 192         int result;
 193
 194         if (slot != 0)
 195                 return -EINVAL;
 196
 197         saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTLO);
 198         udelay(1);
 199
 200         result = ttpci_budget_debiwrite(&budget_av->budget, DEBICICAM, address & 3, 1, value, 0, 0);
 201         if (result == -ETIMEDOUT) {
 202                 ciintf_slot_shutdown(ca, slot);
 203                 printk(KERN_INFO "budget-av: cam ejected 5\n");
 204         }
 205         return result;
 206 }
 207
 208 static int ciintf_slot_reset(struct dvb_ca_en50221 *ca, int slot)
 209 {
 210         struct budget_av *budget_av = (struct budget_av *) ca->data;
 211         struct saa7146_dev *saa = budget_av->budget.dev;
 212
 213         if (slot != 0)
 214                 return -EINVAL;
 215
 216         dprintk(1, "ciintf_slot_reset\n");
 217         budget_av->slot_status = SLOTSTATUS_RESET;
 218
 219         saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTHI); /* disable card */
 220
 221         saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTHI); /* Vcc off */
 222         msleep(2);
 223         saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO); /* Vcc on */
 224         msleep(20); /* 20 ms Vcc settling time */
 225
 226         saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTLO); /* enable card */
 227         ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTB);
 228         msleep(20);
 229
 230         /* reinitialise the frontend if necessary */
 231         if (budget_av->reinitialise_demod)
 232                 dvb_frontend_reinitialise(budget_av->budget.dvb_frontend);
 233
 234         return 0;
 235 }
 236
 237 static int ciintf_slot_shutdown(struct dvb_ca_en50221 *ca, int slot)
 238 {
 239         struct budget_av *budget_av = (struct budget_av *) ca->data;
 240         struct saa7146_dev *saa = budget_av->budget.dev;
 241
 242         if (slot != 0)
 243                 return -EINVAL;
 244
 245         dprintk(1, "ciintf_slot_shutdown\n");
 246
 247         ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTB);
 248         budget_av->slot_status = SLOTSTATUS_NONE;
 249
 250         return 0;
 251 }
 252
 253 static int ciintf_slot_ts_enable(struct dvb_ca_en50221 *ca, int slot)
 254 {
 255         struct budget_av *budget_av = (struct budget_av *) ca->data;
 256         struct saa7146_dev *saa = budget_av->budget.dev;
 257
 258         if (slot != 0)
 259                 return -EINVAL;
 260
 261         dprintk(1, "ciintf_slot_ts_enable: %d\n", budget_av->slot_status);
 262
 263         ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTA);
 264
 265         return 0;
 266 }
 267
 268 static int ciintf_poll_slot_status(struct dvb_ca_en50221 *ca, int slot, int open)
 269 {
 270         struct budget_av *budget_av = (struct budget_av *) ca->data;
 271         struct saa7146_dev *saa = budget_av->budget.dev;
 272         int result;
 273
 274         if (slot != 0)
 275                 return -EINVAL;
 276
 277         /* test the card detect line - needs to be done carefully
 278          * since it never goes high for some CAMs on this interface (e.g. topuptv) */
 279         if (budget_av->slot_status == SLOTSTATUS_NONE) {
 280                 saa7146_setgpio(saa, 3, SAA7146_GPIO_INPUT);
 281                 udelay(1);
 282                 if (saa7146_read(saa, PSR) & MASK_06) {
 283                         if (budget_av->slot_status == SLOTSTATUS_NONE) {
 284                                 budget_av->slot_status = SLOTSTATUS_PRESENT;
 285                                 printk(KERN_INFO "budget-av: cam inserted A\n");
 286                         }
 287                 }
 288                 saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTLO);
 289         }
 290
 291         /* We also try and read from IO memory to work round the above detection bug. If
 292          * there is no CAM, we will get a timeout. Only done if there is no cam
 293          * present, since this test actually breaks some cams :(
 294          *
 295          * if the CI interface is not open, we also do the above test since we
 296          * don't care if the cam has problems - we'll be resetting it on open() anyway */
 297         if ((budget_av->slot_status == SLOTSTATUS_NONE) || (!open)) {
 298                 saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTLO);
 299                 result = ttpci_budget_debiread(&budget_av->budget, DEBICICAM, 0, 1, 0, 1);
 300                 if ((result >= 0) && (budget_av->slot_status == SLOTSTATUS_NONE)) {
 301                         budget_av->slot_status = SLOTSTATUS_PRESENT;
 302                         printk(KERN_INFO "budget-av: cam inserted B\n");
 303                 } else if (result < 0) {
 304                         if (budget_av->slot_status != SLOTSTATUS_NONE) {
 305                                 ciintf_slot_shutdown(ca, slot);
 306                                 printk(KERN_INFO "budget-av: cam ejected 5\n");
 307                                 return 0;
 308                         }
 309                 }
 310         }
 311
 312         /* read from attribute memory in reset/ready state to know when the CAM is ready */
 313         if (budget_av->slot_status == SLOTSTATUS_RESET) {
 314                 result = ciintf_read_attribute_mem(ca, slot, 0);
 315                 if (result == 0x1d) {
 316                         budget_av->slot_status = SLOTSTATUS_READY;
 317                 }
 318         }
 319
 320         /* work out correct return code */
 321         if (budget_av->slot_status != SLOTSTATUS_NONE) {
 322                 if (budget_av->slot_status & SLOTSTATUS_READY) {
 323                         return DVB_CA_EN50221_POLL_CAM_PRESENT | DVB_CA_EN50221_POLL_CAM_READY;
 324                 }
 325                 return DVB_CA_EN50221_POLL_CAM_PRESENT;
 326         }
 327         return 0;
 328 }
 329
 330 static int ciintf_init(struct budget_av *budget_av)
 331 {
 332         struct saa7146_dev *saa = budget_av->budget.dev;
 333         int result;
 334
 335         memset(&budget_av->ca, 0, sizeof(struct dvb_ca_en50221));
 336
 337         saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO);
 338         saa7146_setgpio(saa, 1, SAA7146_GPIO_OUTLO);
 339         saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTLO);
 340         saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTLO);
 341
 342         /* Enable DEBI pins */
 343         saa7146_write(saa, MC1, MASK_27 | MASK_11);
 344
 345         /* register CI interface */
 346         budget_av->ca.owner = THIS_MODULE;
 347         budget_av->ca.read_attribute_mem = ciintf_read_attribute_mem;
 348         budget_av->ca.write_attribute_mem = ciintf_write_attribute_mem;
 349         budget_av->ca.read_cam_control = ciintf_read_cam_control;
 350         budget_av->ca.write_cam_control = ciintf_write_cam_control;
 351         budget_av->ca.slot_reset = ciintf_slot_reset;
 352         budget_av->ca.slot_shutdown = ciintf_slot_shutdown;
 353         budget_av->ca.slot_ts_enable = ciintf_slot_ts_enable;
 354         budget_av->ca.poll_slot_status = ciintf_poll_slot_status;
 355         budget_av->ca.data = budget_av;
 356         budget_av->budget.ci_present = 1;
 357         budget_av->slot_status = SLOTSTATUS_NONE;
 358
 359         if ((result = dvb_ca_en50221_init(&budget_av->budget.dvb_adapter,
 360                                           &budget_av->ca, 0, 1)) != 0) {
 361                 printk(KERN_ERR "budget-av: ci initialisation failed.\n");
 362                 goto error;
 363         }
 364
 365         printk(KERN_INFO "budget-av: ci interface initialised.\n");
 366         return 0;
 367
 368 error:
 369         saa7146_write(saa, MC1, MASK_27);
 370         return result;
 371 }
 372
 373 static void ciintf_deinit(struct budget_av *budget_av)
 374 {
 375         struct saa7146_dev *saa = budget_av->budget.dev;
 376
 377         saa7146_setgpio(saa, 0, SAA7146_GPIO_INPUT);
 378         saa7146_setgpio(saa, 1, SAA7146_GPIO_INPUT);
 379         saa7146_setgpio(saa, 2, SAA7146_GPIO_INPUT);
 380         saa7146_setgpio(saa, 3, SAA7146_GPIO_INPUT);
 381
 382         /* release the CA device */
 383         dvb_ca_en50221_release(&budget_av->ca);
 384
 385         /* disable DEBI pins */
 386         saa7146_write(saa, MC1, MASK_27);
 387 }
 388
 389
 390 static const u8 saa7113_tab[] = {
 391         0x01, 0x08,
 392         0x02, 0xc0,
 393         0x03, 0x33,
 394         0x04, 0x00,
 395         0x05, 0x00,
 396         0x06, 0xeb,
 397         0x07, 0xe0,
 398         0x08, 0x28,
 399         0x09, 0x00,
 400         0x0a, 0x80,
 401         0x0b, 0x47,
 402         0x0c, 0x40,
 403         0x0d, 0x00,
 404         0x0e, 0x01,
 405         0x0f, 0x44,
 406
 407         0x10, 0x08,
 408         0x11, 0x0c,
 409         0x12, 0x7b,
 410         0x13, 0x00,
 411         0x15, 0x00, 0x16, 0x00, 0x17, 0x00,
 412
 413         0x57, 0xff,
 414         0x40, 0x82, 0x58, 0x00, 0x59, 0x54, 0x5a, 0x07,
 415         0x5b, 0x83, 0x5e, 0x00,
 416         0xff
 417 };
 418
 419 static int saa7113_init(struct budget_av *budget_av)
 420 {
 421         struct budget *budget = &budget_av->budget;
 422         struct saa7146_dev *saa = budget->dev;
 423         const u8 *data = saa7113_tab;
 424
 425         saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTHI);
 426         msleep(200);
 427
 428         if (i2c_writereg(&budget->i2c_adap, 0x4a, 0x01, 0x08) != 1) {
 429                 dprintk(1, "saa7113 not found on KNC card\n");
 430                 return -ENODEV;
 431         }
 432
 433         dprintk(1, "saa7113 detected and initializing\n");
 434
 435         while (*data != 0xff) {
 436                 i2c_writereg(&budget->i2c_adap, 0x4a, *data, *(data + 1));
 437                 data += 2;
 438         }
 439
 440         dprintk(1, "saa7113  status=%02x\n", i2c_readreg(&budget->i2c_adap, 0x4a, 0x1f));
 441
 442         return 0;
 443 }
 444
 445 static int saa7113_setinput(struct budget_av *budget_av, int input)
 446 {
 447         struct budget *budget = &budget_av->budget;
 448
 449         if (1 != budget_av->has_saa7113)
 450                 return -ENODEV;
 451
 452         if (input == 1) {
 453                 i2c_writereg(&budget->i2c_adap, 0x4a, 0x02, 0xc7);
 454                 i2c_writereg(&budget->i2c_adap, 0x4a, 0x09, 0x80);
 455         } else if (input == 0) {
 456                 i2c_writereg(&budget->i2c_adap, 0x4a, 0x02, 0xc0);
 457                 i2c_writereg(&budget->i2c_adap, 0x4a, 0x09, 0x00);
 458         } else
 459                 return -EINVAL;
 460
 461         budget_av->cur_input = input;
 462         return 0;
 463 }
 464
 465
 466 static int philips_su1278_ty_ci_set_symbol_rate(struct dvb_frontend *fe, u32 srate, u32 ratio)
 467 {
 468         u8 aclk = 0;
 469         u8 bclk = 0;
 470         u8 m1;
 471
 472         aclk = 0xb5;
 473         if (srate < 2000000)
 474                 bclk = 0x86;
 475         else if (srate < 5000000)
 476                 bclk = 0x89;
 477         else if (srate < 15000000)
 478                 bclk = 0x8f;
 479         else if (srate < 45000000)
 480                 bclk = 0x95;
 481
 482         m1 = 0x14;
 483         if (srate < 4000000)
 484                 m1 = 0x10;
 485
 486         stv0299_writereg(fe, 0x13, aclk);
 487         stv0299_writereg(fe, 0x14, bclk);
 488         stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff);
 489         stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff);
 490         stv0299_writereg(fe, 0x21, (ratio) & 0xf0);
 491         stv0299_writereg(fe, 0x0f, 0x80 | m1);
 492
 493         return 0;
 494 }
 495
 496 static int philips_su1278_ty_ci_tuner_set_params(struct dvb_frontend *fe,
 497                                                  struct dvb_frontend_parameters *params)
 498 {
 499         u32 div;
 500         u8 buf[4];
 501         struct budget *budget = (struct budget *) fe->dvb->priv;
 502         struct i2c_msg msg = {.addr = 0x61,.flags = 0,.buf = buf,.len = sizeof(buf) };
 503
 504         if ((params->frequency < 950000) || (params->frequency > 2150000))
 505                 return -EINVAL;
 506
 507         div = (params->frequency + (125 - 1)) / 125;    // round correctly
 508         buf[0] = (div >> 8) & 0x7f;
 509         buf[1] = div & 0xff;
 510         buf[2] = 0x80 | ((div & 0x18000) >> 10) | 4;
 511         buf[3] = 0x20;
 512
 513         if (params->u.qpsk.symbol_rate < 4000000)
 514                 buf[3] |= 1;
 515
 516         if (params->frequency < 1250000)
 517                 buf[3] |= 0;
 518         else if (params->frequency < 1550000)
 519                 buf[3] |= 0x40;
 520         else if (params->frequency < 2050000)
 521                 buf[3] |= 0x80;
 522         else if (params->frequency < 2150000)
 523                 buf[3] |= 0xC0;
 524
 525         if (fe->ops.i2c_gate_ctrl)
 526                 fe->ops.i2c_gate_ctrl(fe, 1);
 527         if (i2c_transfer(&budget->i2c_adap, &msg, 1) != 1)
 528                 return -EIO;
 529         return 0;
 530 }
 531
 532 static u8 typhoon_cinergy1200s_inittab[] = {
 533         0x01, 0x15,
 534         0x02, 0x30,
 535         0x03, 0x00,
 536         0x04, 0x7d,             /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */
 537         0x05, 0x35,             /* I2CT = 0, SCLT = 1, SDAT = 1 */
 538         0x06, 0x40,             /* DAC not used, set to high impendance mode */
 539         0x07, 0x00,             /* DAC LSB */
 540         0x08, 0x40,             /* DiSEqC off */
 541         0x09, 0x00,             /* FIFO */
 542         0x0c, 0x51,             /* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */
 543         0x0d, 0x82,             /* DC offset compensation = ON, beta_agc1 = 2 */
 544         0x0e, 0x23,             /* alpha_tmg = 2, beta_tmg = 3 */
 545         0x10, 0x3f,             // AGC2  0x3d
 546         0x11, 0x84,
 547         0x12, 0xb9,
 548         0x15, 0xc9,             // lock detector threshold
 549         0x16, 0x00,
 550         0x17, 0x00,
 551         0x18, 0x00,
 552         0x19, 0x00,
 553         0x1a, 0x00,
 554         0x1f, 0x50,
 555         0x20, 0x00,
 556         0x21, 0x00,
 557         0x22, 0x00,
 558         0x23, 0x00,
 559         0x28, 0x00,             // out imp: normal  out type: parallel FEC mode:0
 560         0x29, 0x1e,             // 1/2 threshold
 561         0x2a, 0x14,             // 2/3 threshold
 562         0x2b, 0x0f,             // 3/4 threshold
 563         0x2c, 0x09,             // 5/6 threshold
 564         0x2d, 0x05,             // 7/8 threshold
 565         0x2e, 0x01,
 566         0x31, 0x1f,             // test all FECs
 567         0x32, 0x19,             // viterbi and synchro search
 568         0x33, 0xfc,             // rs control
 569         0x34, 0x93,             // error control
 570         0x0f, 0x92,
 571         0xff, 0xff
 572 };
 573
 574 static struct stv0299_config typhoon_config = {
 575         .demod_address = 0x68,
 576         .inittab = typhoon_cinergy1200s_inittab,
 577         .mclk = 88000000UL,
 578         .invert = 0,
 579         .skip_reinit = 0,
 580         .lock_output = STV0299_LOCKOUTPUT_1,
 581         .volt13_op0_op1 = STV0299_VOLT13_OP0,
 582         .min_delay_ms = 100,
 583         .set_symbol_rate = philips_su1278_ty_ci_set_symbol_rate,
 584 };
 585
 586
 587 static struct stv0299_config cinergy_1200s_config = {
 588         .demod_address = 0x68,
 589         .inittab = typhoon_cinergy1200s_inittab,
 590         .mclk = 88000000UL,
 591         .invert = 0,
 592         .skip_reinit = 0,
 593         .lock_output = STV0299_LOCKOUTPUT_0,
 594         .volt13_op0_op1 = STV0299_VOLT13_OP0,
 595         .min_delay_ms = 100,
 596         .set_symbol_rate = philips_su1278_ty_ci_set_symbol_rate,
 597 };
 598
 599 static struct stv0299_config cinergy_1200s_1894_0010_config = {
 600         .demod_address = 0x68,
 601         .inittab = typhoon_cinergy1200s_inittab,
 602         .mclk = 88000000UL,
 603         .invert = 1,
 604         .skip_reinit = 0,
 605         .lock_output = STV0299_LOCKOUTPUT_1,
 606         .volt13_op0_op1 = STV0299_VOLT13_OP0,
 607         .min_delay_ms = 100,
 608         .set_symbol_rate = philips_su1278_ty_ci_set_symbol_rate,
 609 };
 610
 611 static int philips_cu1216_tuner_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
 612 {
 613         struct budget *budget = (struct budget *) fe->dvb->priv;
 614         u8 buf[6];
 615         struct i2c_msg msg = {.addr = 0x60,.flags = 0,.buf = buf,.len = sizeof(buf) };
 616         int i;
 617
 618 #define CU1216_IF 36125000
 619 #define TUNER_MUL 62500
 620
 621         u32 div = (params->frequency + CU1216_IF + TUNER_MUL / 2) / TUNER_MUL;
 622
 623         buf[0] = (div >> 8) & 0x7f;
 624         buf[1] = div & 0xff;
 625         buf[2] = 0xce;
 626         buf[3] = (params->frequency < 150000000 ? 0x01 :
 627                   params->frequency < 445000000 ? 0x02 : 0x04);
 628         buf[4] = 0xde;
 629         buf[5] = 0x20;
 630
 631         if (fe->ops.i2c_gate_ctrl)
 632                 fe->ops.i2c_gate_ctrl(fe, 1);
 633         if (i2c_transfer(&budget->i2c_adap, &msg, 1) != 1)
 634                 return -EIO;
 635
 636         /* wait for the pll lock */
 637         msg.flags = I2C_M_RD;
 638         msg.len = 1;
 639         for (i = 0; i < 20; i++) {
 640                 if (fe->ops.i2c_gate_ctrl)
 641                         fe->ops.i2c_gate_ctrl(fe, 1);
 642                 if (i2c_transfer(&budget->i2c_adap, &msg, 1) == 1 && (buf[0] & 0x40))
 643                         break;
 644                 msleep(10);
 645         }
 646
 647         /* switch the charge pump to the lower current */
 648         msg.flags = 0;
 649         msg.len = 2;
 650         msg.buf = &buf[2];
 651         buf[2] &= ~0x40;
 652         if (fe->ops.i2c_gate_ctrl)
 653                 fe->ops.i2c_gate_ctrl(fe, 1);
 654         if (i2c_transfer(&budget->i2c_adap, &msg, 1) != 1)
 655                 return -EIO;
 656
 657         return 0;
 658 }
 659
 660 static struct tda1002x_config philips_cu1216_config = {
 661         .demod_address = 0x0c,
 662         .invert = 1,
 663 };
 664
 665 static struct tda1002x_config philips_cu1216_config_altaddress = {
 666         .demod_address = 0x0d,
 667         .invert = 0,
 668 };
 669
 670 static struct tda10023_config philips_cu1216_tda10023_config = {
 671         .demod_address = 0x0c,
 672         .invert = 1,
 673 };
 674
 675 static int philips_tu1216_tuner_init(struct dvb_frontend *fe)
 676 {
 677         struct budget *budget = (struct budget *) fe->dvb->priv;
 678         static u8 tu1216_init[] = { 0x0b, 0xf5, 0x85, 0xab };
 679         struct i2c_msg tuner_msg = {.addr = 0x60,.flags = 0,.buf = tu1216_init,.len = sizeof(tu1216_init) };
 680
 681         // setup PLL configuration
 682         if (fe->ops.i2c_gate_ctrl)
 683                 fe->ops.i2c_gate_ctrl(fe, 1);
 684         if (i2c_transfer(&budget->i2c_adap, &tuner_msg, 1) != 1)
 685                 return -EIO;
 686         msleep(1);
 687
 688         return 0;
 689 }
 690
 691 static int philips_tu1216_tuner_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
 692 {
 693         struct budget *budget = (struct budget *) fe->dvb->priv;
 694         u8 tuner_buf[4];
 695         struct i2c_msg tuner_msg = {.addr = 0x60,.flags = 0,.buf = tuner_buf,.len =
 696                         sizeof(tuner_buf) };
 697         int tuner_frequency = 0;
 698         u8 band, cp, filter;
 699
 700         // determine charge pump
 701         tuner_frequency = params->frequency + 36166000;
 702         if (tuner_frequency < 87000000)
 703                 return -EINVAL;
 704         else if (tuner_frequency < 130000000)
 705                 cp = 3;
 706         else if (tuner_frequency < 160000000)
 707                 cp = 5;
 708         else if (tuner_frequency < 200000000)
 709                 cp = 6;
 710         else if (tuner_frequency < 290000000)
 711                 cp = 3;
 712         else if (tuner_frequency < 420000000)
 713                 cp = 5;
 714         else if (tuner_frequency < 480000000)
 715                 cp = 6;
 716         else if (tuner_frequency < 620000000)
 717                 cp = 3;
 718         else if (tuner_frequency < 830000000)
 719                 cp = 5;
 720         else if (tuner_frequency < 895000000)
 721                 cp = 7;
 722         else
 723                 return -EINVAL;
 724
 725         // determine band
 726         if (params->frequency < 49000000)
 727                 return -EINVAL;
 728         else if (params->frequency < 161000000)
 729                 band = 1;
 730         else if (params->frequency < 444000000)
 731                 band = 2;
 732         else if (params->frequency < 861000000)
 733                 band = 4;
 734         else
 735                 return -EINVAL;
 736
 737         // setup PLL filter
 738         switch (params->u.ofdm.bandwidth) {
 739         case BANDWIDTH_6_MHZ:
 740                 filter = 0;
 741                 break;
 742
 743         case BANDWIDTH_7_MHZ:
 744                 filter = 0;
 745                 break;
 746
 747         case BANDWIDTH_8_MHZ:
 748                 filter = 1;
 749                 break;
 750
 751         default:
 752                 return -EINVAL;
 753         }
 754
 755         // calculate divisor
 756         // ((36166000+((1000000/6)/2)) + Finput)/(1000000/6)
 757         tuner_frequency = (((params->frequency / 1000) * 6) + 217496) / 1000;
 758
 759         // setup tuner buffer
 760         tuner_buf[0] = (tuner_frequency >> 8) & 0x7f;
 761         tuner_buf[1] = tuner_frequency & 0xff;
 762         tuner_buf[2] = 0xca;
 763         tuner_buf[3] = (cp << 5) | (filter << 3) | band;
 764
 765         if (fe->ops.i2c_gate_ctrl)
 766                 fe->ops.i2c_gate_ctrl(fe, 1);
 767         if (i2c_transfer(&budget->i2c_adap, &tuner_msg, 1) != 1)
 768                 return -EIO;
 769
 770         msleep(1);
 771         return 0;
 772 }
 773
 774 static int philips_tu1216_request_firmware(struct dvb_frontend *fe,
 775                                            const struct firmware **fw, char *name)
 776 {
 777         struct budget *budget = (struct budget *) fe->dvb->priv;
 778
 779         return request_firmware(fw, name, &budget->dev->pci->dev);
 780 }
 781
 782 static struct tda1004x_config philips_tu1216_config = {
 783
 784         .demod_address = 0x8,
 785         .invert = 1,
 786         .invert_oclk = 1,
 787         .xtal_freq = TDA10046_XTAL_4M,
 788         .agc_config = TDA10046_AGC_DEFAULT,
 789         .if_freq = TDA10046_FREQ_3617,
 790         .request_firmware = philips_tu1216_request_firmware,
 791 };
 792
 793 static u8 philips_sd1878_inittab[] = {
 794         0x01, 0x15,
 795         0x02, 0x30,
 796         0x03, 0x00,
 797         0x04, 0x7d,
 798         0x05, 0x35,
 799         0x06, 0x40,
 800         0x07, 0x00,
 801         0x08, 0x43,
 802         0x09, 0x02,
 803         0x0C, 0x51,
 804         0x0D, 0x82,
 805         0x0E, 0x23,
 806         0x10, 0x3f,
 807         0x11, 0x84,
 808         0x12, 0xb9,
 809         0x15, 0xc9,
 810         0x16, 0x19,
 811         0x17, 0x8c,
 812         0x18, 0x59,
 813         0x19, 0xf8,
 814         0x1a, 0xfe,
 815         0x1c, 0x7f,
 816         0x1d, 0x00,
 817         0x1e, 0x00,
 818         0x1f, 0x50,
 819         0x20, 0x00,
 820         0x21, 0x00,
 821         0x22, 0x00,
 822         0x23, 0x00,
 823         0x28, 0x00,
 824         0x29, 0x28,
 825         0x2a, 0x14,
 826         0x2b, 0x0f,
 827         0x2c, 0x09,
 828         0x2d, 0x09,
 829         0x31, 0x1f,
 830         0x32, 0x19,
 831         0x33, 0xfc,
 832         0x34, 0x93,
 833         0xff, 0xff
 834 };
 835
 836 static int philips_sd1878_ci_set_symbol_rate(struct dvb_frontend *fe,
 837                 u32 srate, u32 ratio)
 838 {
 839         u8 aclk = 0;
 840         u8 bclk = 0;
 841         u8 m1;
 842
 843         aclk = 0xb5;
 844         if (srate < 2000000)
 845                 bclk = 0x86;
 846         else if (srate < 5000000)
 847                 bclk = 0x89;
 848         else if (srate < 15000000)
 849                 bclk = 0x8f;
 850         else if (srate < 45000000)
 851                 bclk = 0x95;
 852
 853         m1 = 0x14;
 854         if (srate < 4000000)
 855                 m1 = 0x10;
 856
 857         stv0299_writereg(fe, 0x0e, 0x23);
 858         stv0299_writereg(fe, 0x0f, 0x94);
 859         stv0299_writereg(fe, 0x10, 0x39);
 860         stv0299_writereg(fe, 0x13, aclk);
 861         stv0299_writereg(fe, 0x14, bclk);
 862         stv0299_writereg(fe, 0x15, 0xc9);
 863         stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff);
 864         stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff);
 865         stv0299_writereg(fe, 0x21, (ratio) & 0xf0);
 866         stv0299_writereg(fe, 0x0f, 0x80 | m1);
 867
 868         return 0;
 869 }
 870
 871 static struct stv0299_config philips_sd1878_config = {
 872         .demod_address = 0x68,
 873      .inittab = philips_sd1878_inittab,
 874         .mclk = 88000000UL,
 875         .invert = 0,
 876         .skip_reinit = 0,
 877         .lock_output = STV0299_LOCKOUTPUT_1,
 878         .volt13_op0_op1 = STV0299_VOLT13_OP0,
 879         .min_delay_ms = 100,
 880         .set_symbol_rate = philips_sd1878_ci_set_symbol_rate,
 881 };
 882
 883 static u8 read_pwm(struct budget_av *budget_av)
 884 {
 885         u8 b = 0xff;
 886         u8 pwm;
 887         struct i2c_msg msg[] = { {.addr = 0x50,.flags = 0,.buf = &b,.len = 1},
 888         {.addr = 0x50,.flags = I2C_M_RD,.buf = &pwm,.len = 1}
 889         };
 890
 891         if ((i2c_transfer(&budget_av->budget.i2c_adap, msg, 2) != 2)
 892             || (pwm == 0xff))
 893                 pwm = 0x48;
 894
 895         return pwm;
 896 }
 897
 898 #define SUBID_DVBS_KNC1                 0x0010
 899 #define SUBID_DVBS_KNC1_PLUS            0x0011
 900 #define SUBID_DVBS_TYPHOON              0x4f56
 901 #define SUBID_DVBS_CINERGY1200          0x1154
 902 #define SUBID_DVBS_CYNERGY1200N         0x1155
 903 #define SUBID_DVBS_TV_STAR              0x0014
 904 #define SUBID_DVBS_TV_STAR_PLUS_X4      0x0015
 905 #define SUBID_DVBS_TV_STAR_CI           0x0016
 906 #define SUBID_DVBS_EASYWATCH_1          0x001a
 907 #define SUBID_DVBS_EASYWATCH_2          0x001b
 908 #define SUBID_DVBS_EASYWATCH            0x001e
 909
 910 #define SUBID_DVBC_EASYWATCH            0x002a
 911 #define SUBID_DVBC_EASYWATCH_MK3        0x002c
 912 #define SUBID_DVBC_KNC1                 0x0020
 913 #define SUBID_DVBC_KNC1_PLUS            0x0021
 914 #define SUBID_DVBC_KNC1_MK3             0x0022
 915 #define SUBID_DVBC_KNC1_PLUS_MK3        0x0023
 916 #define SUBID_DVBC_CINERGY1200          0x1156
 917 #define SUBID_DVBC_CINERGY1200_MK3      0x1176
 918
 919 #define SUBID_DVBT_EASYWATCH            0x003a
 920 #define SUBID_DVBT_KNC1_PLUS            0x0031
 921 #define SUBID_DVBT_KNC1                 0x0030
 922 #define SUBID_DVBT_CINERGY1200          0x1157
 923
 924 static void frontend_init(struct budget_av *budget_av)
 925 {
 926         struct saa7146_dev * saa = budget_av->budget.dev;
 927         struct dvb_frontend * fe = NULL;
 928
 929         /* Enable / PowerON Frontend */
 930         saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO);
 931
 932         /* Wait for PowerON */
 933         msleep(100);
 934
 935         /* additional setup necessary for the PLUS cards */
 936         switch (saa->pci->subsystem_device) {
 937                 case SUBID_DVBS_KNC1_PLUS:
 938                 case SUBID_DVBC_KNC1_PLUS:
 939                 case SUBID_DVBT_KNC1_PLUS:
 940                 case SUBID_DVBC_EASYWATCH:
 941                 case SUBID_DVBC_KNC1_PLUS_MK3:
 942                         saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTHI);
 943                         break;
 944         }
 945
 946         switch (saa->pci->subsystem_device) {
 947
 948         case SUBID_DVBS_KNC1:
 949                 /*
 950                  * maybe that setting is needed for other dvb-s cards as well,
 951                  * but so far it has been only confirmed for this type
 952                  */
 953                 budget_av->reinitialise_demod = 1;
 954                 /* fall through */
 955         case SUBID_DVBS_KNC1_PLUS:
 956         case SUBID_DVBS_EASYWATCH_1:
 957                 if (saa->pci->subsystem_vendor == 0x1894) {
 958                         fe = dvb_attach(stv0299_attach, &cinergy_1200s_1894_0010_config,
 959                                              &budget_av->budget.i2c_adap);
 960                         if (fe) {
 961                                 dvb_attach(tua6100_attach, fe, 0x60, &budget_av->budget.i2c_adap);
 962                         }
 963                 } else {
 964                         fe = dvb_attach(stv0299_attach, &typhoon_config,
 965                                              &budget_av->budget.i2c_adap);
 966                         if (fe) {
 967                                 fe->ops.tuner_ops.set_params = philips_su1278_ty_ci_tuner_set_params;
 968                         }
 969                 }
 970                 break;
 971
 972         case SUBID_DVBS_TV_STAR:
 973         case SUBID_DVBS_TV_STAR_PLUS_X4:
 974         case SUBID_DVBS_TV_STAR_CI:
 975         case SUBID_DVBS_CYNERGY1200N:
 976         case SUBID_DVBS_EASYWATCH:
 977         case SUBID_DVBS_EASYWATCH_2:
 978                 fe = dvb_attach(stv0299_attach, &philips_sd1878_config,
 979                                 &budget_av->budget.i2c_adap);
 980                 if (fe) {
 981                         dvb_attach(dvb_pll_attach, fe, 0x60,
 982                                    &budget_av->budget.i2c_adap,
 983                                    DVB_PLL_PHILIPS_SD1878_TDA8261);
 984                 }
 985                 break;
 986
 987         case SUBID_DVBS_TYPHOON:
 988                 fe = dvb_attach(stv0299_attach, &typhoon_config,
 989                                     &budget_av->budget.i2c_adap);
 990                 if (fe) {
 991                         fe->ops.tuner_ops.set_params = philips_su1278_ty_ci_tuner_set_params;
 992                 }
 993                 break;
 994
 995         case SUBID_DVBS_CINERGY1200:
 996                 fe = dvb_attach(stv0299_attach, &cinergy_1200s_config,
 997                                     &budget_av->budget.i2c_adap);
 998                 if (fe) {
 999                         fe->ops.tuner_ops.set_params = philips_su1278_ty_ci_tuner_set_params;
1000                 }
1001                 break;
1002
1003         case SUBID_DVBC_KNC1:
1004         case SUBID_DVBC_KNC1_PLUS:
1005         case SUBID_DVBC_CINERGY1200:
1006         case SUBID_DVBC_EASYWATCH:
1007                 budget_av->reinitialise_demod = 1;
1008                 budget_av->budget.dev->i2c_bitrate = SAA7146_I2C_BUS_BIT_RATE_240;
1009                 fe = dvb_attach(tda10021_attach, &philips_cu1216_config,
1010                                      &budget_av->budget.i2c_adap,
1011                                      read_pwm(budget_av));
1012                 if (fe == NULL)
1013                         fe = dvb_attach(tda10021_attach, &philips_cu1216_config_altaddress,
1014                                              &budget_av->budget.i2c_adap,
1015                                              read_pwm(budget_av));
1016                 if (fe) {
1017                         fe->ops.tuner_ops.set_params = philips_cu1216_tuner_set_params;
1018                 }
1019                 break;
1020
1021         case SUBID_DVBC_EASYWATCH_MK3:
1022         case SUBID_DVBC_CINERGY1200_MK3:
1023         case SUBID_DVBC_KNC1_MK3:
1024         case SUBID_DVBC_KNC1_PLUS_MK3:
1025                 budget_av->reinitialise_demod = 1;
1026                 budget_av->budget.dev->i2c_bitrate = SAA7146_I2C_BUS_BIT_RATE_240;
1027                 fe = dvb_attach(tda10023_attach,
1028                         &philips_cu1216_tda10023_config,
1029                         &budget_av->budget.i2c_adap,
1030                         read_pwm(budget_av));
1031                 if (fe) {
1032                         fe->ops.tuner_ops.set_params = philips_cu1216_tuner_set_params;
1033                 }
1034                 break;
1035
1036         case SUBID_DVBT_EASYWATCH:
1037         case SUBID_DVBT_KNC1:
1038         case SUBID_DVBT_KNC1_PLUS:
1039         case SUBID_DVBT_CINERGY1200:
1040                 budget_av->reinitialise_demod = 1;
1041                 fe = dvb_attach(tda10046_attach, &philips_tu1216_config,
1042                                      &budget_av->budget.i2c_adap);
1043                 if (fe) {
1044                         fe->ops.tuner_ops.init = philips_tu1216_tuner_init;
1045                         fe->ops.tuner_ops.set_params = philips_tu1216_tuner_set_params;
1046                 }
1047                 break;
1048         }
1049
1050         if (fe == NULL) {
1051                 printk(KERN_ERR "budget-av: A frontend driver was not found "
1052                                 "for device %04x/%04x subsystem %04x/%04x\n",
1053                        saa->pci->vendor,
1054                        saa->pci->device,
1055                        saa->pci->subsystem_vendor,
1056                        saa->pci->subsystem_device);
1057                 return;
1058         }
1059
1060         budget_av->budget.dvb_frontend = fe;
1061
1062         if (dvb_register_frontend(&budget_av->budget.dvb_adapter,
1063                                   budget_av->budget.dvb_frontend)) {
1064                 printk(KERN_ERR "budget-av: Frontend registration failed!\n");
1065                 dvb_frontend_detach(budget_av->budget.dvb_frontend);
1066                 budget_av->budget.dvb_frontend = NULL;
1067         }
1068 }
1069
1070
1071 static void budget_av_irq(struct saa7146_dev *dev, u32 * isr)
1072 {
1073         struct budget_av *budget_av = (struct budget_av *) dev->ext_priv;
1074
1075         dprintk(8, "dev: %p, budget_av: %p\n", dev, budget_av);
1076
1077         if (*isr & MASK_10)
1078                 ttpci_budget_irq10_handler(dev, isr);
1079 }
1080
1081 static int budget_av_detach(struct saa7146_dev *dev)
1082 {
1083         struct budget_av *budget_av = (struct budget_av *) dev->ext_priv;
1084         int err;
1085
1086         dprintk(2, "dev: %p\n", dev);
1087
1088         if (1 == budget_av->has_saa7113) {
1089                 saa7146_setgpio(dev, 0, SAA7146_GPIO_OUTLO);
1090
1091                 msleep(200);
1092
1093                 saa7146_unregister_device(&budget_av->vd, dev);
1094
1095                 saa7146_vv_release(dev);
1096         }
1097
1098         if (budget_av->budget.ci_present)
1099                 ciintf_deinit(budget_av);
1100
1101         if (budget_av->budget.dvb_frontend != NULL) {
1102                 dvb_unregister_frontend(budget_av->budget.dvb_frontend);
1103                 dvb_frontend_detach(budget_av->budget.dvb_frontend);
1104         }
1105         err = ttpci_budget_deinit(&budget_av->budget);
1106
1107         kfree(budget_av);
1108
1109         return err;
1110 }
1111
1112 static struct saa7146_ext_vv vv_data;
1113
1114 static int budget_av_attach(struct saa7146_dev *dev, struct saa7146_pci_extension_data *info)
1115 {
1116         struct budget_av *budget_av;
1117         u8 *mac;
1118         int err;
1119
1120         dprintk(2, "dev: %p\n", dev);
1121
1122         if (!(budget_av = kzalloc(sizeof(struct budget_av), GFP_KERNEL)))
1123                 return -ENOMEM;
1124
1125         budget_av->has_saa7113 = 0;
1126         budget_av->budget.ci_present = 0;
1127
1128         dev->ext_priv = budget_av;
1129
1130         if ((err = ttpci_budget_init(&budget_av->budget, dev, info, THIS_MODULE))) {
1131                 kfree(budget_av);
1132                 return err;
1133         }
1134
1135         /* knc1 initialization */
1136         saa7146_write(dev, DD1_STREAM_B, 0x04000000);
1137         saa7146_write(dev, DD1_INIT, 0x07000600);
1138         saa7146_write(dev, MC2, MASK_09 | MASK_25 | MASK_10 | MASK_26);
1139
1140         if (saa7113_init(budget_av) == 0) {
1141                 budget_av->has_saa7113 = 1;
1142
1143                 if (0 != saa7146_vv_init(dev, &vv_data)) {
1144                         /* fixme: proper cleanup here */
1145                         ERR(("cannot init vv subsystem.\n"));
1146                         return err;
1147                 }
1148
1149                 if ((err = saa7146_register_device(&budget_av->vd, dev, "knc1", VFL_TYPE_GRABBER))) {
1150                         /* fixme: proper cleanup here */
1151                         ERR(("cannot register capture v4l2 device.\n"));
1152                         saa7146_vv_release(dev);
1153                         return err;
1154                 }
1155
1156                 /* beware: this modifies dev->vv ... */
1157                 saa7146_set_hps_source_and_sync(dev, SAA7146_HPS_SOURCE_PORT_A,
1158                                                 SAA7146_HPS_SYNC_PORT_A);
1159
1160                 saa7113_setinput(budget_av, 0);
1161         }
1162
1163         /* fixme: find some sane values here... */
1164         saa7146_write(dev, PCI_BT_V1, 0x1c00101f);
1165
1166         mac = budget_av->budget.dvb_adapter.proposed_mac;
1167         if (i2c_readregs(&budget_av->budget.i2c_adap, 0xa0, 0x30, mac, 6)) {
1168                 printk(KERN_ERR "KNC1-%d: Could not read MAC from KNC1 card\n",
1169                        budget_av->budget.dvb_adapter.num);
1170                 memset(mac, 0, 6);
1171         } else {
1172                 printk(KERN_INFO "KNC1-%d: MAC addr = %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n",
1173                        budget_av->budget.dvb_adapter.num,
1174                        mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
1175         }
1176
1177         budget_av->budget.dvb_adapter.priv = budget_av;
1178         frontend_init(budget_av);
1179         ciintf_init(budget_av);
1180
1181         ttpci_budget_init_hooks(&budget_av->budget);
1182
1183         return 0;
1184 }
1185
1186 #define KNC1_INPUTS 2
1187 static struct v4l2_input knc1_inputs[KNC1_INPUTS] = {
1188         {0, "Composite", V4L2_INPUT_TYPE_TUNER, 1, 0, V4L2_STD_PAL_BG | V4L2_STD_NTSC_M, 0},
1189         {1, "S-Video", V4L2_INPUT_TYPE_CAMERA, 2, 0, V4L2_STD_PAL_BG | V4L2_STD_NTSC_M, 0},
1190 };
1191
1192 static struct saa7146_extension_ioctls ioctls[] = {
1193         {VIDIOC_ENUMINPUT, SAA7146_EXCLUSIVE},
1194         {VIDIOC_G_INPUT, SAA7146_EXCLUSIVE},
1195         {VIDIOC_S_INPUT, SAA7146_EXCLUSIVE},
1196         {0, 0}
1197 };
1198
1199 static int av_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg)
1200 {
1201         struct saa7146_dev *dev = fh->dev;
1202         struct budget_av *budget_av = (struct budget_av *) dev->ext_priv;
1203
1204         switch (cmd) {
1205         case VIDIOC_ENUMINPUT:{
1206                 struct v4l2_input *i = arg;
1207
1208                 dprintk(1, "VIDIOC_ENUMINPUT %d.\n", i->index);
1209                 if (i->index < 0 || i->index >= KNC1_INPUTS) {
1210                         return -EINVAL;
1211                 }
1212                 memcpy(i, &knc1_inputs[i->index], sizeof(struct v4l2_input));
1213                 return 0;
1214         }
1215         case VIDIOC_G_INPUT:{
1216                 int *input = (int *) arg;
1217
1218                 *input = budget_av->cur_input;
1219
1220                 dprintk(1, "VIDIOC_G_INPUT %d.\n", *input);
1221                 return 0;
1222         }
1223         case VIDIOC_S_INPUT:{
1224                 int input = *(int *) arg;
1225                 dprintk(1, "VIDIOC_S_INPUT %d.\n", input);
1226                 return saa7113_setinput(budget_av, input);
1227         }
1228         default:
1229                 return -ENOIOCTLCMD;
1230         }
1231         return 0;
1232 }
1233
1234 static struct saa7146_standard standard[] = {
1235         {.name = "PAL",.id = V4L2_STD_PAL,
1236          .v_offset = 0x17,.v_field = 288,
1237          .h_offset = 0x14,.h_pixels = 680,
1238          .v_max_out = 576,.h_max_out = 768 },
1239
1240         {.name = "NTSC",.id = V4L2_STD_NTSC,
1241          .v_offset = 0x16,.v_field = 240,
1242          .h_offset = 0x06,.h_pixels = 708,
1243          .v_max_out = 480,.h_max_out = 640, },
1244 };
1245
1246 static struct saa7146_ext_vv vv_data = {
1247         .inputs = 2,
1248         .capabilities = 0,      // perhaps later: V4L2_CAP_VBI_CAPTURE, but that need tweaking with the saa7113
1249         .flags = 0,
1250         .stds = &standard[0],
1251         .num_stds = ARRAY_SIZE(standard),
1252         .ioctls = &ioctls[0],
1253         .ioctl = av_ioctl,
1254 };
1255
1256 static struct saa7146_extension budget_extension;
1257
1258 MAKE_BUDGET_INFO(knc1s, "KNC1 DVB-S", BUDGET_KNC1S);
1259 MAKE_BUDGET_INFO(knc1c, "KNC1 DVB-C", BUDGET_KNC1C);
1260 MAKE_BUDGET_INFO(knc1t, "KNC1 DVB-T", BUDGET_KNC1T);
1261 MAKE_BUDGET_INFO(kncxs, "KNC TV STAR DVB-S", BUDGET_TVSTAR);
1262 MAKE_BUDGET_INFO(satewpls, "Satelco EasyWatch DVB-S light", BUDGET_TVSTAR);
1263 MAKE_BUDGET_INFO(satewpls1, "Satelco EasyWatch DVB-S light", BUDGET_KNC1S);
1264 MAKE_BUDGET_INFO(satewps, "Satelco EasyWatch DVB-S", BUDGET_KNC1S);
1265 MAKE_BUDGET_INFO(satewplc, "Satelco EasyWatch DVB-C", BUDGET_KNC1CP);
1266 MAKE_BUDGET_INFO(satewcmk3, "Satelco EasyWatch DVB-C MK3", BUDGET_KNC1C_MK3);
1267 MAKE_BUDGET_INFO(satewt, "Satelco EasyWatch DVB-T", BUDGET_KNC1T);
1268 MAKE_BUDGET_INFO(knc1sp, "KNC1 DVB-S Plus", BUDGET_KNC1SP);
1269 MAKE_BUDGET_INFO(knc1spx4, "KNC1 DVB-S Plus X4", BUDGET_KNC1SP);
1270 MAKE_BUDGET_INFO(knc1cp, "KNC1 DVB-C Plus", BUDGET_KNC1CP);
1271 MAKE_BUDGET_INFO(knc1cmk3, "KNC1 DVB-C MK3", BUDGET_KNC1C_MK3);
1272 MAKE_BUDGET_INFO(knc1cpmk3, "KNC1 DVB-C Plus MK3", BUDGET_KNC1CP_MK3);
1273 MAKE_BUDGET_INFO(knc1tp, "KNC1 DVB-T Plus", BUDGET_KNC1TP);
1274 MAKE_BUDGET_INFO(cin1200s, "TerraTec Cinergy 1200 DVB-S", BUDGET_CIN1200S);
1275 MAKE_BUDGET_INFO(cin1200sn, "TerraTec Cinergy 1200 DVB-S", BUDGET_CIN1200S);
1276 MAKE_BUDGET_INFO(cin1200c, "Terratec Cinergy 1200 DVB-C", BUDGET_CIN1200C);
1277 MAKE_BUDGET_INFO(cin1200cmk3, "Terratec Cinergy 1200 DVB-C MK3", BUDGET_CIN1200C_MK3);
1278 MAKE_BUDGET_INFO(cin1200t, "Terratec Cinergy 1200 DVB-T", BUDGET_CIN1200T);
1279
1280 static struct pci_device_id pci_tbl[] = {
1281         MAKE_EXTENSION_PCI(knc1s, 0x1131, 0x4f56),
1282         MAKE_EXTENSION_PCI(knc1s, 0x1131, 0x0010),
1283         MAKE_EXTENSION_PCI(knc1s, 0x1894, 0x0010),
1284         MAKE_EXTENSION_PCI(knc1sp, 0x1131, 0x0011),
1285         MAKE_EXTENSION_PCI(knc1sp, 0x1894, 0x0011),
1286         MAKE_EXTENSION_PCI(kncxs, 0x1894, 0x0014),
1287         MAKE_EXTENSION_PCI(knc1spx4, 0x1894, 0x0015),
1288         MAKE_EXTENSION_PCI(kncxs, 0x1894, 0x0016),
1289         MAKE_EXTENSION_PCI(satewpls, 0x1894, 0x001e),
1290         MAKE_EXTENSION_PCI(satewpls1, 0x1894, 0x001a),
1291         MAKE_EXTENSION_PCI(satewps, 0x1894, 0x001b),
1292         MAKE_EXTENSION_PCI(satewplc, 0x1894, 0x002a),
1293         MAKE_EXTENSION_PCI(satewcmk3, 0x1894, 0x002c),
1294         MAKE_EXTENSION_PCI(satewt, 0x1894, 0x003a),
1295         MAKE_EXTENSION_PCI(knc1c, 0x1894, 0x0020),
1296         MAKE_EXTENSION_PCI(knc1cp, 0x1894, 0x0021),
1297         MAKE_EXTENSION_PCI(knc1cmk3, 0x1894, 0x0022),
1298         MAKE_EXTENSION_PCI(knc1cpmk3, 0x1894, 0x0023),
1299         MAKE_EXTENSION_PCI(knc1t, 0x1894, 0x0030),
1300         MAKE_EXTENSION_PCI(knc1tp, 0x1894, 0x0031),
1301         MAKE_EXTENSION_PCI(cin1200s, 0x153b, 0x1154),
1302         MAKE_EXTENSION_PCI(cin1200sn, 0x153b, 0x1155),
1303         MAKE_EXTENSION_PCI(cin1200c, 0x153b, 0x1156),
1304         MAKE_EXTENSION_PCI(cin1200cmk3, 0x153b, 0x1176),
1305         MAKE_EXTENSION_PCI(cin1200t, 0x153b, 0x1157),
1306         {
1307          .vendor = 0,
1308         }
1309 };
1310
1311 MODULE_DEVICE_TABLE(pci, pci_tbl);
1312
1313 static struct saa7146_extension budget_extension = {
1314         .name = "budget_av",
1315         .flags = SAA7146_USE_I2C_IRQ,
1316
1317         .pci_tbl = pci_tbl,
1318
1319         .module = THIS_MODULE,
1320         .attach = budget_av_attach,
1321         .detach = budget_av_detach,
1322
1323         .irq_mask = MASK_10,
1324         .irq_func = budget_av_irq,
1325 };
1326
1327 static int __init budget_av_init(void)
1328 {
1329         return saa7146_register_extension(&budget_extension);
1330 }
1331
1332 static void __exit budget_av_exit(void)
1333 {
1334         saa7146_unregister_extension(&budget_extension);
1335 }
1336
1337 module_init(budget_av_init);
1338 module_exit(budget_av_exit);
1339
1340 MODULE_LICENSE("GPL");
1341 MODULE_AUTHOR("Ralph Metzler, Marcus Metzler, Michael Hunold, others");
1342 MODULE_DESCRIPTION("driver for the SAA7146 based so-called "
1343                    "budget PCI DVB w/ analog input and CI-module (e.g. the KNC cards)");