drivers/media/dvb/dvb-usb/ttusb2.c

   1 /* DVB USB compliant linux driver for Technotrend DVB USB boxes and clones
   2  * (e.g. Pinnacle 400e DVB-S USB2.0).
   3  *
   4  * The Pinnacle 400e uses the same protocol as the Technotrend USB1.1 boxes.
   5  *
   6  * TDA8263 + TDA10086
   7  *
   8  * I2C addresses:
   9  * 0x08 - LNBP21PD   - LNB power supply
  10  * 0x0e - TDA10086   - Demodulator
  11  * 0x50 - FX2 eeprom
  12  * 0x60 - TDA8263    - Tuner
  13  * 0x78 ???
  14  *
  15  * Copyright (c) 2002 Holger Waechtler <holger@convergence.de>
  16  * Copyright (c) 2003 Felix Domke <tmbinc@elitedvb.net>
  17  * Copyright (C) 2005-6 Patrick Boettcher <pb@linuxtv.org>
  18  *
  19  *      This program is free software; you can redistribute it and/or modify it
  20  *      under the terms of the GNU General Public License as published by the Free
  21  *      Software Foundation, version 2.
  22  *
  23  * see Documentation/dvb/README.dvb-usb for more information
  24  */
  25 #define DVB_USB_LOG_PREFIX "ttusb2"
  26 #include "dvb-usb.h"
  27
  28 #include "ttusb2.h"
  29
  30 #include "tda826x.h"
  31 #include "tda10086.h"
  32 #include "tda1002x.h"
  33 #include "tda827x.h"
  34 #include "lnbp21.h"
  35
  36 /* debug */
  37 static int dvb_usb_ttusb2_debug;
  38 #define deb_info(args...)   dprintk(dvb_usb_ttusb2_debug,0x01,args)
  39 module_param_named(debug,dvb_usb_ttusb2_debug, int, 0644);
  40 MODULE_PARM_DESC(debug, "set debugging level (1=info (or-able))." DVB_USB_DEBUG_STATUS);
  41
  42 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
  43
  44 struct ttusb2_state {
  45         u8 id;
  46 };
  47
  48 static int ttusb2_msg(struct dvb_usb_device *d, u8 cmd,
  49                 u8 *wbuf, int wlen, u8 *rbuf, int rlen)
  50 {
  51         struct ttusb2_state *st = d->priv;
  52         u8 s[wlen+4],r[64] = { 0 };
  53         int ret = 0;
  54
  55         memset(s,0,wlen+4);
  56
  57         s[0] = 0xaa;
  58         s[1] = ++st->id;
  59         s[2] = cmd;
  60         s[3] = wlen;
  61         memcpy(&s[4],wbuf,wlen);
  62
  63         ret = dvb_usb_generic_rw(d, s, wlen+4, r, 64, 0);
  64
  65         if (ret  != 0 ||
  66                 r[0] != 0x55 ||
  67                 r[1] != s[1] ||
  68                 r[2] != cmd ||
  69                 (rlen > 0 && r[3] != rlen)) {
  70                 warn("there might have been an error during control message transfer. (rlen = %d, was %d)",rlen,r[3]);
  71                 return -EIO;
  72         }
  73
  74         if (rlen > 0)
  75                 memcpy(rbuf, &r[4], rlen);
  76
  77         return 0;
  78 }
  79
  80 static int ttusb2_i2c_xfer(struct i2c_adapter *adap,struct i2c_msg msg[],int num)
  81 {
  82         struct dvb_usb_device *d = i2c_get_adapdata(adap);
  83         static u8 obuf[60], ibuf[60];
  84         int i,read;
  85
  86         if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
  87                 return -EAGAIN;
  88
  89         if (num > 2)
  90                 warn("more than 2 i2c messages at a time is not handled yet. TODO.");
  91
  92         for (i = 0; i < num; i++) {
  93                 read = i+1 < num && (msg[i+1].flags & I2C_M_RD);
  94
  95                 obuf[0] = (msg[i].addr << 1) | read;
  96                 obuf[1] = msg[i].len;
  97
  98                 /* read request */
  99                 if (read)
 100                         obuf[2] = msg[i+1].len;
 101                 else
 102                         obuf[2] = 0;
 103
 104                 memcpy(&obuf[3],msg[i].buf,msg[i].len);
 105
 106                 if (ttusb2_msg(d, CMD_I2C_XFER, obuf, msg[i].len+3, ibuf, obuf[2] + 3) < 0) {
 107                         err("i2c transfer failed.");
 108                         break;
 109                 }
 110
 111                 if (read) {
 112                         memcpy(msg[i+1].buf,&ibuf[3],msg[i+1].len);
 113                         i++;
 114                 }
 115         }
 116
 117         mutex_unlock(&d->i2c_mutex);
 118         return i;
 119 }
 120
 121 static u32 ttusb2_i2c_func(struct i2c_adapter *adapter)
 122 {
 123         return I2C_FUNC_I2C;
 124 }
 125
 126 static struct i2c_algorithm ttusb2_i2c_algo = {
 127         .master_xfer   = ttusb2_i2c_xfer,
 128         .functionality = ttusb2_i2c_func,
 129 };
 130
 131 /* Callbacks for DVB USB */
 132 static int ttusb2_identify_state (struct usb_device *udev, struct
 133                 dvb_usb_device_properties *props, struct dvb_usb_device_description **desc,
 134                 int *cold)
 135 {
 136         *cold = udev->descriptor.iManufacturer == 0 && udev->descriptor.iProduct == 0;
 137         return 0;
 138 }
 139
 140 static int ttusb2_power_ctrl(struct dvb_usb_device *d, int onoff)
 141 {
 142         u8 b = onoff;
 143         ttusb2_msg(d, CMD_POWER, &b, 0, NULL, 0);
 144         return ttusb2_msg(d, CMD_POWER, &b, 1, NULL, 0);
 145 }
 146
 147
 148 static struct tda10086_config tda10086_config = {
 149         .demod_address = 0x0e,
 150         .invert = 0,
 151         .diseqc_tone = 1,
 152         .xtal_freq = TDA10086_XTAL_16M,
 153 };
 154
 155 static struct tda10023_config tda10023_config = {
 156         .demod_address = 0x0c,
 157         .invert = 0,
 158         .xtal = 16000000,
 159         .pll_m = 11,
 160         .pll_p = 3,
 161         .pll_n = 1,
 162         .deltaf = 0xa511,
 163 };
 164
 165 static int ttusb2_frontend_tda10086_attach(struct dvb_usb_adapter *adap)
 166 {
 167         if (usb_set_interface(adap->dev->udev,0,3) < 0)
 168                 err("set interface to alts=3 failed");
 169
 170         if ((adap->fe = dvb_attach(tda10086_attach, &tda10086_config, &adap->dev->i2c_adap)) == NULL) {
 171                 deb_info("TDA10086 attach failed\n");
 172                 return -ENODEV;
 173         }
 174
 175         return 0;
 176 }
 177
 178 static int ttusb2_frontend_tda10023_attach(struct dvb_usb_adapter *adap)
 179 {
 180         if (usb_set_interface(adap->dev->udev, 0, 3) < 0)
 181                 err("set interface to alts=3 failed");
 182         if ((adap->fe = dvb_attach(tda10023_attach, &tda10023_config, &adap->dev->i2c_adap, 0x48)) == NULL) {
 183                 deb_info("TDA10023 attach failed\n");
 184                 return -ENODEV;
 185         }
 186         return 0;
 187 }
 188
 189 static int ttusb2_tuner_tda827x_attach(struct dvb_usb_adapter *adap)
 190 {
 191         if (dvb_attach(tda827x_attach, adap->fe, 0x61, &adap->dev->i2c_adap, NULL) == NULL) {
 192                 printk(KERN_ERR "%s: No tda827x found!\n", __func__);
 193                 return -ENODEV;
 194         }
 195         return 0;
 196 }
 197
 198 static int ttusb2_tuner_tda826x_attach(struct dvb_usb_adapter *adap)
 199 {
 200         if (dvb_attach(tda826x_attach, adap->fe, 0x60, &adap->dev->i2c_adap, 0) == NULL) {
 201                 deb_info("TDA8263 attach failed\n");
 202                 return -ENODEV;
 203         }
 204
 205         if (dvb_attach(lnbp21_attach, adap->fe, &adap->dev->i2c_adap, 0, 0) == NULL) {
 206                 deb_info("LNBP21 attach failed\n");
 207                 return -ENODEV;
 208         }
 209         return 0;
 210 }
 211
 212 /* DVB USB Driver stuff */
 213 static struct dvb_usb_device_properties ttusb2_properties;
 214 static struct dvb_usb_device_properties ttusb2_properties_s2400;
 215 static struct dvb_usb_device_properties ttusb2_properties_ct3650;
 216
 217 static int ttusb2_probe(struct usb_interface *intf,
 218                 const struct usb_device_id *id)
 219 {
 220         if (0 == dvb_usb_device_init(intf, &ttusb2_properties,
 221                                      THIS_MODULE, NULL, adapter_nr) ||
 222             0 == dvb_usb_device_init(intf, &ttusb2_properties_s2400,
 223                                      THIS_MODULE, NULL, adapter_nr) ||
 224             0 == dvb_usb_device_init(intf, &ttusb2_properties_ct3650,
 225                                      THIS_MODULE, NULL, adapter_nr))
 226                 return 0;
 227         return -ENODEV;
 228 }
 229
 230 static struct usb_device_id ttusb2_table [] = {
 231         { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PCTV_400E) },
 232         { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PCTV_450E) },
 233         { USB_DEVICE(USB_VID_TECHNOTREND,
 234                 USB_PID_TECHNOTREND_CONNECT_S2400) },
 235         { USB_DEVICE(USB_VID_TECHNOTREND,
 236                 USB_PID_TECHNOTREND_CONNECT_CT3650) },
 237         {}              /* Terminating entry */
 238 };
 239 MODULE_DEVICE_TABLE (usb, ttusb2_table);
 240
 241 static struct dvb_usb_device_properties ttusb2_properties = {
 242         .caps = DVB_USB_IS_AN_I2C_ADAPTER,
 243
 244         .usb_ctrl = CYPRESS_FX2,
 245         .firmware = "dvb-usb-pctv-400e-01.fw",
 246
 247         .size_of_priv = sizeof(struct ttusb2_state),
 248
 249         .num_adapters = 1,
 250         .adapter = {
 251                 {
 252                         .streaming_ctrl   = NULL, // ttusb2_streaming_ctrl,
 253
 254                         .frontend_attach  = ttusb2_frontend_tda10086_attach,
 255                         .tuner_attach     = ttusb2_tuner_tda826x_attach,
 256
 257                         /* parameter for the MPEG2-data transfer */
 258                         .stream = {
 259                                 .type = USB_ISOC,
 260                                 .count = 5,
 261                                 .endpoint = 0x02,
 262                                 .u = {
 263                                         .isoc = {
 264                                                 .framesperurb = 4,
 265                                                 .framesize = 940,
 266                                                 .interval = 1,
 267                                         }
 268                                 }
 269                         }
 270                 }
 271         },
 272
 273         .power_ctrl       = ttusb2_power_ctrl,
 274         .identify_state   = ttusb2_identify_state,
 275
 276         .i2c_algo         = &ttusb2_i2c_algo,
 277
 278         .generic_bulk_ctrl_endpoint = 0x01,
 279
 280         .num_device_descs = 2,
 281         .devices = {
 282                 {   "Pinnacle 400e DVB-S USB2.0",
 283                         { &ttusb2_table[0], NULL },
 284                         { NULL },
 285                 },
 286                 {   "Pinnacle 450e DVB-S USB2.0",
 287                         { &ttusb2_table[1], NULL },
 288                         { NULL },
 289                 },
 290         }
 291 };
 292
 293 static struct dvb_usb_device_properties ttusb2_properties_s2400 = {
 294         .caps = DVB_USB_IS_AN_I2C_ADAPTER,
 295
 296         .usb_ctrl = CYPRESS_FX2,
 297         .firmware = "dvb-usb-tt-s2400-01.fw",
 298
 299         .size_of_priv = sizeof(struct ttusb2_state),
 300
 301         .num_adapters = 1,
 302         .adapter = {
 303                 {
 304                         .streaming_ctrl   = NULL,
 305
 306                         .frontend_attach  = ttusb2_frontend_tda10086_attach,
 307                         .tuner_attach     = ttusb2_tuner_tda826x_attach,
 308
 309                         /* parameter for the MPEG2-data transfer */
 310                         .stream = {
 311                                 .type = USB_ISOC,
 312                                 .count = 5,
 313                                 .endpoint = 0x02,
 314                                 .u = {
 315                                         .isoc = {
 316                                                 .framesperurb = 4,
 317                                                 .framesize = 940,
 318                                                 .interval = 1,
 319                                         }
 320                                 }
 321                         }
 322                 }
 323         },
 324
 325         .power_ctrl       = ttusb2_power_ctrl,
 326         .identify_state   = ttusb2_identify_state,
 327
 328         .i2c_algo         = &ttusb2_i2c_algo,
 329
 330         .generic_bulk_ctrl_endpoint = 0x01,
 331
 332         .num_device_descs = 1,
 333         .devices = {
 334                 {   "Technotrend TT-connect S-2400",
 335                         { &ttusb2_table[2], NULL },
 336                         { NULL },
 337                 },
 338         }
 339 };
 340
 341 static struct dvb_usb_device_properties ttusb2_properties_ct3650 = {
 342         .caps = DVB_USB_IS_AN_I2C_ADAPTER,
 343
 344         .usb_ctrl = CYPRESS_FX2,
 345
 346         .size_of_priv = sizeof(struct ttusb2_state),
 347
 348         .num_adapters = 1,
 349         .adapter = {
 350                 {
 351                         .streaming_ctrl   = NULL,
 352
 353                         .frontend_attach  = ttusb2_frontend_tda10023_attach,
 354                         .tuner_attach = ttusb2_tuner_tda827x_attach,
 355
 356                         /* parameter for the MPEG2-data transfer */
 357                         .stream = {
 358                                 .type = USB_ISOC,
 359                                 .count = 5,
 360                                 .endpoint = 0x02,
 361                                 .u = {
 362                                         .isoc = {
 363                                                 .framesperurb = 4,
 364                                                 .framesize = 940,
 365                                                 .interval = 1,
 366                                         }
 367                                 }
 368                         }
 369                 },
 370         },
 371
 372         .power_ctrl       = ttusb2_power_ctrl,
 373         .identify_state   = ttusb2_identify_state,
 374
 375         .i2c_algo         = &ttusb2_i2c_algo,
 376
 377         .generic_bulk_ctrl_endpoint = 0x01,
 378
 379         .num_device_descs = 1,
 380         .devices = {
 381                 {   "Technotrend TT-connect CT-3650",
 382                         .warm_ids = { &ttusb2_table[3], NULL },
 383                 },
 384         }
 385 };
 386
 387 static struct usb_driver ttusb2_driver = {
 388         .name           = "dvb_usb_ttusb2",
 389         .probe          = ttusb2_probe,
 390         .disconnect = dvb_usb_device_exit,
 391         .id_table       = ttusb2_table,
 392 };
 393
 394 /* module stuff */
 395 static int __init ttusb2_module_init(void)
 396 {
 397         int result;
 398         if ((result = usb_register(&ttusb2_driver))) {
 399                 err("usb_register failed. Error number %d",result);
 400                 return result;
 401         }
 402
 403         return 0;
 404 }
 405
 406 static void __exit ttusb2_module_exit(void)
 407 {
 408         /* deregister this driver from the USB subsystem */
 409         usb_deregister(&ttusb2_driver);
 410 }
 411
 412 module_init (ttusb2_module_init);
 413 module_exit (ttusb2_module_exit);
 414
 415 MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>");
 416 MODULE_DESCRIPTION("Driver for Pinnacle PCTV 400e DVB-S USB2.0");
 417 MODULE_VERSION("1.0");
 418 MODULE_LICENSE("GPL");