drivers/leds/leds-lp5523.c

   1 /*
   2  * lp5523.c - LP5523 LED Driver
   3  *
   4  * Copyright (C) 2010 Nokia Corporation
   5  *
   6  * Contact: Samu Onkalo <samu.p.onkalo@nokia.com>
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License
  10  * version 2 as published by the Free Software Foundation.
  11  *
  12  * This program is distributed in the hope that it will be useful, but
  13  * WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  15  * General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software
  19  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
  20  * 02110-1301 USA
  21  */
  22
  23 #include <linux/module.h>
  24 #include <linux/init.h>
  25 #include <linux/i2c.h>
  26 #include <linux/mutex.h>
  27 #include <linux/gpio.h>
  28 #include <linux/interrupt.h>
  29 #include <linux/delay.h>
  30 #include <linux/ctype.h>
  31 #include <linux/spinlock.h>
  32 #include <linux/wait.h>
  33 #include <linux/leds.h>
  34 #include <linux/leds-lp5523.h>
  35 #include <linux/workqueue.h>
  36 #include <linux/slab.h>
  37
  38 #define LP5523_REG_ENABLE               0x00
  39 #define LP5523_REG_OP_MODE              0x01
  40 #define LP5523_REG_RATIOMETRIC_MSB      0x02
  41 #define LP5523_REG_RATIOMETRIC_LSB      0x03
  42 #define LP5523_REG_ENABLE_LEDS_MSB      0x04
  43 #define LP5523_REG_ENABLE_LEDS_LSB      0x05
  44 #define LP5523_REG_LED_CNTRL_BASE       0x06
  45 #define LP5523_REG_LED_PWM_BASE         0x16
  46 #define LP5523_REG_LED_CURRENT_BASE     0x26
  47 #define LP5523_REG_CONFIG               0x36
  48 #define LP5523_REG_CHANNEL1_PC          0x37
  49 #define LP5523_REG_CHANNEL2_PC          0x38
  50 #define LP5523_REG_CHANNEL3_PC          0x39
  51 #define LP5523_REG_STATUS               0x3a
  52 #define LP5523_REG_GPO                  0x3b
  53 #define LP5523_REG_VARIABLE             0x3c
  54 #define LP5523_REG_RESET                0x3d
  55 #define LP5523_REG_TEMP_CTRL            0x3e
  56 #define LP5523_REG_TEMP_READ            0x3f
  57 #define LP5523_REG_TEMP_WRITE           0x40
  58 #define LP5523_REG_LED_TEST_CTRL        0x41
  59 #define LP5523_REG_LED_TEST_ADC         0x42
  60 #define LP5523_REG_ENG1_VARIABLE        0x45
  61 #define LP5523_REG_ENG2_VARIABLE        0x46
  62 #define LP5523_REG_ENG3_VARIABLE        0x47
  63 #define LP5523_REG_MASTER_FADER1        0x48
  64 #define LP5523_REG_MASTER_FADER2        0x49
  65 #define LP5523_REG_MASTER_FADER3        0x4a
  66 #define LP5523_REG_CH1_PROG_START       0x4c
  67 #define LP5523_REG_CH2_PROG_START       0x4d
  68 #define LP5523_REG_CH3_PROG_START       0x4e
  69 #define LP5523_REG_PROG_PAGE_SEL        0x4f
  70 #define LP5523_REG_PROG_MEM             0x50
  71
  72 #define LP5523_CMD_LOAD                 0x15 /* 00010101 */
  73 #define LP5523_CMD_RUN                  0x2a /* 00101010 */
  74 #define LP5523_CMD_DISABLED             0x00 /* 00000000 */
  75
  76 #define LP5523_ENABLE                   0x40
  77 #define LP5523_AUTO_INC                 0x40
  78 #define LP5523_PWR_SAVE                 0x20
  79 #define LP5523_PWM_PWR_SAVE             0x04
  80 #define LP5523_CP_1                     0x08
  81 #define LP5523_CP_1_5                   0x10
  82 #define LP5523_CP_AUTO                  0x18
  83 #define LP5523_INT_CLK                  0x01
  84 #define LP5523_AUTO_CLK                 0x02
  85 #define LP5523_EN_LEDTEST               0x80
  86 #define LP5523_LEDTEST_DONE             0x80
  87
  88 #define LP5523_DEFAULT_CURRENT          50 /* microAmps */
  89 #define LP5523_PROGRAM_LENGTH           32 /* in bytes */
  90 #define LP5523_PROGRAM_PAGES            6
  91 #define LP5523_ADC_SHORTCIRC_LIM        80
  92
  93 #define LP5523_LEDS                     9
  94 #define LP5523_ENGINES                  3
  95
  96 #define LP5523_ENG_MASK_BASE            0x30 /* 00110000 */
  97
  98 #define LP5523_ENG_STATUS_MASK          0x07 /* 00000111 */
  99
 100 #define LP5523_IRQ_FLAGS                IRQF_TRIGGER_FALLING
 101
 102 #define LP5523_EXT_CLK_USED             0x08
 103
 104 #define LED_ACTIVE(mux, led)            (!!(mux & (0x0001 << led)))
 105 #define SHIFT_MASK(id)                  (((id) - 1) * 2)
 106
 107 struct lp5523_engine {
 108         int             id;
 109         u8              mode;
 110         u8              prog_page;
 111         u8              mux_page;
 112         u16             led_mux;
 113         u8              engine_mask;
 114 };
 115
 116 struct lp5523_led {
 117         int                     id;
 118         u8                      chan_nr;
 119         u8                      led_current;
 120         u8                      max_current;
 121         struct led_classdev     cdev;
 122         struct work_struct      brightness_work;
 123         u8                      brightness;
 124 };
 125
 126 struct lp5523_chip {
 127         struct mutex            lock; /* Serialize control */
 128         struct i2c_client       *client;
 129         struct lp5523_engine    engines[LP5523_ENGINES];
 130         struct lp5523_led       leds[LP5523_LEDS];
 131         struct lp5523_platform_data *pdata;
 132         u8                      num_channels;
 133         u8                      num_leds;
 134 };
 135
 136 static inline struct lp5523_led *cdev_to_led(struct led_classdev *cdev)
 137 {
 138         return container_of(cdev, struct lp5523_led, cdev);
 139 }
 140
 141 static inline struct lp5523_chip *engine_to_lp5523(struct lp5523_engine *engine)
 142 {
 143         return container_of(engine, struct lp5523_chip,
 144                             engines[engine->id - 1]);
 145 }
 146
 147 static inline struct lp5523_chip *led_to_lp5523(struct lp5523_led *led)
 148 {
 149         return container_of(led, struct lp5523_chip,
 150                             leds[led->id]);
 151 }
 152
 153 static int lp5523_set_mode(struct lp5523_engine *engine, u8 mode);
 154 static int lp5523_set_engine_mode(struct lp5523_engine *engine, u8 mode);
 155 static int lp5523_load_program(struct lp5523_engine *engine, u8 *pattern);
 156
 157 static void lp5523_led_brightness_work(struct work_struct *work);
 158
 159 static int lp5523_write(struct i2c_client *client, u8 reg, u8 value)
 160 {
 161         return i2c_smbus_write_byte_data(client, reg, value);
 162 }
 163
 164 static int lp5523_read(struct i2c_client *client, u8 reg, u8 *buf)
 165 {
 166         s32 ret = i2c_smbus_read_byte_data(client, reg);
 167
 168         if (ret < 0)
 169                 return -EIO;
 170
 171         *buf = ret;
 172         return 0;
 173 }
 174
 175 static int lp5523_detect(struct i2c_client *client)
 176 {
 177         int ret;
 178         u8 buf;
 179
 180         ret = lp5523_write(client, LP5523_REG_ENABLE, 0x40);
 181         if (ret)
 182                 return ret;
 183         ret = lp5523_read(client, LP5523_REG_ENABLE, &buf);
 184         if (ret)
 185                 return ret;
 186         if (buf == 0x40)
 187                 return 0;
 188         else
 189                 return -ENODEV;
 190 }
 191
 192 static int lp5523_configure(struct i2c_client *client)
 193 {
 194         struct lp5523_chip *chip = i2c_get_clientdata(client);
 195         int ret = 0;
 196         u8 status;
 197
 198         /* one pattern per engine setting led mux start and stop addresses */
 199         u8 pattern[][LP5523_PROGRAM_LENGTH] =  {
 200                 { 0x9c, 0x30, 0x9c, 0xb0, 0x9d, 0x80, 0xd8, 0x00, 0},
 201                 { 0x9c, 0x40, 0x9c, 0xc0, 0x9d, 0x80, 0xd8, 0x00, 0},
 202                 { 0x9c, 0x50, 0x9c, 0xd0, 0x9d, 0x80, 0xd8, 0x00, 0},
 203         };
 204
 205         ret |= lp5523_write(client, LP5523_REG_ENABLE, LP5523_ENABLE);
 206         /* Chip startup time is 500 us, 1 - 2 ms gives some margin */
 207         usleep_range(1000, 2000);
 208
 209         ret |= lp5523_write(client, LP5523_REG_CONFIG,
 210                             LP5523_AUTO_INC | LP5523_PWR_SAVE |
 211                             LP5523_CP_AUTO | LP5523_AUTO_CLK |
 212                             LP5523_PWM_PWR_SAVE);
 213
 214         /* turn on all leds */
 215         ret |= lp5523_write(client, LP5523_REG_ENABLE_LEDS_MSB, 0x01);
 216         ret |= lp5523_write(client, LP5523_REG_ENABLE_LEDS_LSB, 0xff);
 217
 218         /* hardcode 32 bytes of memory for each engine from program memory */
 219         ret |= lp5523_write(client, LP5523_REG_CH1_PROG_START, 0x00);
 220         ret |= lp5523_write(client, LP5523_REG_CH2_PROG_START, 0x10);
 221         ret |= lp5523_write(client, LP5523_REG_CH3_PROG_START, 0x20);
 222
 223         /* write led mux address space for each channel */
 224         ret |= lp5523_load_program(&chip->engines[0], pattern[0]);
 225         ret |= lp5523_load_program(&chip->engines[1], pattern[1]);
 226         ret |= lp5523_load_program(&chip->engines[2], pattern[2]);
 227
 228         if (ret) {
 229                 dev_err(&client->dev, "could not load mux programs\n");
 230                 return -1;
 231         }
 232
 233         /* set all engines exec state and mode to run 00101010 */
 234         ret |= lp5523_write(client, LP5523_REG_ENABLE,
 235                             (LP5523_CMD_RUN | LP5523_ENABLE));
 236
 237         ret |= lp5523_write(client, LP5523_REG_OP_MODE, LP5523_CMD_RUN);
 238
 239         if (ret) {
 240                 dev_err(&client->dev, "could not start mux programs\n");
 241                 return -1;
 242         }
 243
 244         /* Let the programs run for couple of ms and check the engine status */
 245         usleep_range(3000, 6000);
 246         lp5523_read(client, LP5523_REG_STATUS, &status);
 247         status &= LP5523_ENG_STATUS_MASK;
 248
 249         if (status == LP5523_ENG_STATUS_MASK) {
 250                 dev_dbg(&client->dev, "all engines configured\n");
 251         } else {
 252                 dev_info(&client->dev, "status == %x\n", status);
 253                 dev_err(&client->dev, "cound not configure LED engine\n");
 254                 return -1;
 255         }
 256
 257         dev_info(&client->dev, "disabling engines\n");
 258
 259         ret |= lp5523_write(client, LP5523_REG_OP_MODE, LP5523_CMD_DISABLED);
 260
 261         return ret;
 262 }
 263
 264 static int lp5523_set_engine_mode(struct lp5523_engine *engine, u8 mode)
 265 {
 266         struct lp5523_chip *chip = engine_to_lp5523(engine);
 267         struct i2c_client *client = chip->client;
 268         int ret;
 269         u8 engine_state;
 270
 271         ret = lp5523_read(client, LP5523_REG_OP_MODE, &engine_state);
 272         if (ret)
 273                 goto fail;
 274
 275         engine_state &= ~(engine->engine_mask);
 276
 277         /* set mode only for this engine */
 278         mode &= engine->engine_mask;
 279
 280         engine_state |= mode;
 281
 282         ret |= lp5523_write(client, LP5523_REG_OP_MODE, engine_state);
 283 fail:
 284         return ret;
 285 }
 286
 287 static int lp5523_load_mux(struct lp5523_engine *engine, u16 mux)
 288 {
 289         struct lp5523_chip *chip = engine_to_lp5523(engine);
 290         struct i2c_client *client = chip->client;
 291         int ret = 0;
 292
 293         ret |= lp5523_set_engine_mode(engine, LP5523_CMD_LOAD);
 294
 295         ret |= lp5523_write(client, LP5523_REG_PROG_PAGE_SEL, engine->mux_page);
 296         ret |= lp5523_write(client, LP5523_REG_PROG_MEM,
 297                             (u8)(mux >> 8));
 298         ret |= lp5523_write(client, LP5523_REG_PROG_MEM + 1, (u8)(mux));
 299         engine->led_mux = mux;
 300
 301         return ret;
 302 }
 303
 304 static int lp5523_load_program(struct lp5523_engine *engine, u8 *pattern)
 305 {
 306         struct lp5523_chip *chip = engine_to_lp5523(engine);
 307         struct i2c_client *client = chip->client;
 308
 309         int ret = 0;
 310
 311         ret |= lp5523_set_engine_mode(engine, LP5523_CMD_LOAD);
 312
 313         ret |= lp5523_write(client, LP5523_REG_PROG_PAGE_SEL,
 314                             engine->prog_page);
 315         ret |= i2c_smbus_write_i2c_block_data(client, LP5523_REG_PROG_MEM,
 316                                               LP5523_PROGRAM_LENGTH, pattern);
 317
 318         return ret;
 319 }
 320
 321 static int lp5523_run_program(struct lp5523_engine *engine)
 322 {
 323         struct lp5523_chip *chip = engine_to_lp5523(engine);
 324         struct i2c_client *client = chip->client;
 325         int ret;
 326
 327         ret = lp5523_write(client, LP5523_REG_ENABLE,
 328                                         LP5523_CMD_RUN | LP5523_ENABLE);
 329         if (ret)
 330                 goto fail;
 331
 332         ret = lp5523_set_engine_mode(engine, LP5523_CMD_RUN);
 333 fail:
 334         return ret;
 335 }
 336
 337 static int lp5523_mux_parse(const char *buf, u16 *mux, size_t len)
 338 {
 339         int i;
 340         u16 tmp_mux = 0;
 341         len = len < LP5523_LEDS ? len : LP5523_LEDS;
 342         for (i = 0; i < len; i++) {
 343                 switch (buf[i]) {
 344                 case '1':
 345                         tmp_mux |= (1 << i);
 346                         break;
 347                 case '0':
 348                         break;
 349                 case '\n':
 350                         i = len;
 351                         break;
 352                 default:
 353                         return -1;
 354                 }
 355         }
 356         *mux = tmp_mux;
 357
 358         return 0;
 359 }
 360
 361 static void lp5523_mux_to_array(u16 led_mux, char *array)
 362 {
 363         int i, pos = 0;
 364         for (i = 0; i < LP5523_LEDS; i++)
 365                 pos += sprintf(array + pos, "%x", LED_ACTIVE(led_mux, i));
 366
 367         array[pos] = '\0';
 368 }
 369
 370 /*--------------------------------------------------------------*/
 371 /*                      Sysfs interface                         */
 372 /*--------------------------------------------------------------*/
 373
 374 static ssize_t show_engine_leds(struct device *dev,
 375                             struct device_attribute *attr,
 376                             char *buf, int nr)
 377 {
 378         struct i2c_client *client = to_i2c_client(dev);
 379         struct lp5523_chip *chip = i2c_get_clientdata(client);
 380         char mux[LP5523_LEDS + 1];
 381
 382         lp5523_mux_to_array(chip->engines[nr - 1].led_mux, mux);
 383
 384         return sprintf(buf, "%s\n", mux);
 385 }
 386
 387 #define show_leds(nr)                                                   \
 388 static ssize_t show_engine##nr##_leds(struct device *dev,               \
 389                             struct device_attribute *attr,              \
 390                             char *buf)                                  \
 391 {                                                                       \
 392         return show_engine_leds(dev, attr, buf, nr);                    \
 393 }
 394 show_leds(1)
 395 show_leds(2)
 396 show_leds(3)
 397
 398 static ssize_t store_engine_leds(struct device *dev,
 399                              struct device_attribute *attr,
 400                              const char *buf, size_t len, int nr)
 401 {
 402         struct i2c_client *client = to_i2c_client(dev);
 403         struct lp5523_chip *chip = i2c_get_clientdata(client);
 404         u16 mux = 0;
 405         ssize_t ret;
 406
 407         if (lp5523_mux_parse(buf, &mux, len))
 408                 return -EINVAL;
 409
 410         mutex_lock(&chip->lock);
 411         ret = -EINVAL;
 412         if (chip->engines[nr - 1].mode != LP5523_CMD_LOAD)
 413                 goto leave;
 414
 415         if (lp5523_load_mux(&chip->engines[nr - 1], mux))
 416                 goto leave;
 417
 418         ret = len;
 419 leave:
 420         mutex_unlock(&chip->lock);
 421         return ret;
 422 }
 423
 424 #define store_leds(nr)                                          \
 425 static ssize_t store_engine##nr##_leds(struct device *dev,      \
 426                              struct device_attribute *attr,     \
 427                              const char *buf, size_t len)       \
 428 {                                                               \
 429         return store_engine_leds(dev, attr, buf, len, nr);      \
 430 }
 431 store_leds(1)
 432 store_leds(2)
 433 store_leds(3)
 434
 435 static ssize_t lp5523_selftest(struct device *dev,
 436                                struct device_attribute *attr,
 437                                char *buf)
 438 {
 439         struct i2c_client *client = to_i2c_client(dev);
 440         struct lp5523_chip *chip = i2c_get_clientdata(client);
 441         int i, ret, pos = 0;
 442         int led = 0;
 443         u8 status, adc, vdd;
 444
 445         mutex_lock(&chip->lock);
 446
 447         ret = lp5523_read(chip->client, LP5523_REG_STATUS, &status);
 448         if (ret < 0)
 449                 goto fail;
 450
 451         /* Check that ext clock is really in use if requested */
 452         if ((chip->pdata) && (chip->pdata->clock_mode == LP5523_CLOCK_EXT))
 453                 if  ((status & LP5523_EXT_CLK_USED) == 0)
 454                         goto fail;
 455
 456         /* Measure VDD (i.e. VBAT) first (channel 16 corresponds to VDD) */
 457         lp5523_write(chip->client, LP5523_REG_LED_TEST_CTRL,
 458                                     LP5523_EN_LEDTEST | 16);
 459         usleep_range(3000, 6000); /* ADC conversion time is typically 2.7 ms */
 460         ret = lp5523_read(chip->client, LP5523_REG_STATUS, &status);
 461         if (!(status & LP5523_LEDTEST_DONE))
 462                 usleep_range(3000, 6000); /* Was not ready. Wait little bit */
 463
 464         ret |= lp5523_read(chip->client, LP5523_REG_LED_TEST_ADC, &vdd);
 465         vdd--;  /* There may be some fluctuation in measurement */
 466
 467         for (i = 0; i < LP5523_LEDS; i++) {
 468                 /* Skip non-existing channels */
 469                 if (chip->pdata->led_config[i].led_current == 0)
 470                         continue;
 471
 472                 /* Set default current */
 473                 lp5523_write(chip->client,
 474                         LP5523_REG_LED_CURRENT_BASE + i,
 475                         chip->pdata->led_config[i].led_current);
 476
 477                 lp5523_write(chip->client, LP5523_REG_LED_PWM_BASE + i, 0xff);
 478                 /* let current stabilize 2 - 4ms before measurements start */
 479                 usleep_range(2000, 4000);
 480                 lp5523_write(chip->client,
 481                              LP5523_REG_LED_TEST_CTRL,
 482                              LP5523_EN_LEDTEST | i);
 483                 /* ADC conversion time is 2.7 ms typically */
 484                 usleep_range(3000, 6000);
 485                 ret = lp5523_read(chip->client, LP5523_REG_STATUS, &status);
 486                 if (!(status & LP5523_LEDTEST_DONE))
 487                         usleep_range(3000, 6000);/* Was not ready. Wait. */
 488                 ret |= lp5523_read(chip->client, LP5523_REG_LED_TEST_ADC, &adc);
 489
 490                 if (adc >= vdd || adc < LP5523_ADC_SHORTCIRC_LIM)
 491                         pos += sprintf(buf + pos, "LED %d FAIL\n", i);
 492
 493                 lp5523_write(chip->client, LP5523_REG_LED_PWM_BASE + i, 0x00);
 494
 495                 /* Restore current */
 496                 lp5523_write(chip->client,
 497                         LP5523_REG_LED_CURRENT_BASE + i,
 498                         chip->leds[led].led_current);
 499                 led++;
 500         }
 501         if (pos == 0)
 502                 pos = sprintf(buf, "OK\n");
 503         goto release_lock;
 504 fail:
 505         pos = sprintf(buf, "FAIL\n");
 506
 507 release_lock:
 508         mutex_unlock(&chip->lock);
 509
 510         return pos;
 511 }
 512
 513 static void lp5523_set_brightness(struct led_classdev *cdev,
 514                              enum led_brightness brightness)
 515 {
 516         struct lp5523_led *led = cdev_to_led(cdev);
 517
 518         led->brightness = (u8)brightness;
 519
 520         schedule_work(&led->brightness_work);
 521 }
 522
 523 static void lp5523_led_brightness_work(struct work_struct *work)
 524 {
 525         struct lp5523_led *led = container_of(work,
 526                                               struct lp5523_led,
 527                                               brightness_work);
 528         struct lp5523_chip *chip = led_to_lp5523(led);
 529         struct i2c_client *client = chip->client;
 530
 531         mutex_lock(&chip->lock);
 532
 533         lp5523_write(client, LP5523_REG_LED_PWM_BASE + led->chan_nr,
 534                      led->brightness);
 535
 536         mutex_unlock(&chip->lock);
 537 }
 538
 539 static int lp5523_do_store_load(struct lp5523_engine *engine,
 540                                 const char *buf, size_t len)
 541 {
 542         struct lp5523_chip *chip = engine_to_lp5523(engine);
 543         struct i2c_client *client = chip->client;
 544         int  ret, nrchars, offset = 0, i = 0;
 545         char c[3];
 546         unsigned cmd;
 547         u8 pattern[LP5523_PROGRAM_LENGTH] = {0};
 548
 549         while ((offset < len - 1) && (i < LP5523_PROGRAM_LENGTH)) {
 550                 /* separate sscanfs because length is working only for %s */
 551                 ret = sscanf(buf + offset, "%2s%n ", c, &nrchars);
 552                 ret = sscanf(c, "%2x", &cmd);
 553                 if (ret != 1)
 554                         goto fail;
 555                 pattern[i] = (u8)cmd;
 556
 557                 offset += nrchars;
 558                 i++;
 559         }
 560
 561         /* Each instruction is 16bit long. Check that length is even */
 562         if (i % 2)
 563                 goto fail;
 564
 565         mutex_lock(&chip->lock);
 566
 567         if (engine->mode == LP5523_CMD_LOAD)
 568                 ret = lp5523_load_program(engine, pattern);
 569         else
 570                 ret = -EINVAL;
 571
 572         mutex_unlock(&chip->lock);
 573
 574         if (ret) {
 575                 dev_err(&client->dev, "failed loading pattern\n");
 576                 return ret;
 577         }
 578
 579         return len;
 580 fail:
 581         dev_err(&client->dev, "wrong pattern format\n");
 582         return -EINVAL;
 583 }
 584
 585 static ssize_t store_engine_load(struct device *dev,
 586                                      struct device_attribute *attr,
 587                                      const char *buf, size_t len, int nr)
 588 {
 589         struct i2c_client *client = to_i2c_client(dev);
 590         struct lp5523_chip *chip = i2c_get_clientdata(client);
 591         return lp5523_do_store_load(&chip->engines[nr - 1], buf, len);
 592 }
 593
 594 #define store_load(nr)                                                  \
 595 static ssize_t store_engine##nr##_load(struct device *dev,              \
 596                                      struct device_attribute *attr,     \
 597                                      const char *buf, size_t len)       \
 598 {                                                                       \
 599         return store_engine_load(dev, attr, buf, len, nr);              \
 600 }
 601 store_load(1)
 602 store_load(2)
 603 store_load(3)
 604
 605 static ssize_t show_engine_mode(struct device *dev,
 606                                 struct device_attribute *attr,
 607                                 char *buf, int nr)
 608 {
 609         struct i2c_client *client = to_i2c_client(dev);
 610         struct lp5523_chip *chip = i2c_get_clientdata(client);
 611         switch (chip->engines[nr - 1].mode) {
 612         case LP5523_CMD_RUN:
 613                 return sprintf(buf, "run\n");
 614         case LP5523_CMD_LOAD:
 615                 return sprintf(buf, "load\n");
 616         case LP5523_CMD_DISABLED:
 617                 return sprintf(buf, "disabled\n");
 618         default:
 619                 return sprintf(buf, "disabled\n");
 620         }
 621 }
 622
 623 #define show_mode(nr)                                                   \
 624 static ssize_t show_engine##nr##_mode(struct device *dev,               \
 625                                     struct device_attribute *attr,      \
 626                                     char *buf)                          \
 627 {                                                                       \
 628         return show_engine_mode(dev, attr, buf, nr);                    \
 629 }
 630 show_mode(1)
 631 show_mode(2)
 632 show_mode(3)
 633
 634 static ssize_t store_engine_mode(struct device *dev,
 635                                  struct device_attribute *attr,
 636                                  const char *buf, size_t len, int nr)
 637 {
 638         struct i2c_client *client = to_i2c_client(dev);
 639         struct lp5523_chip *chip = i2c_get_clientdata(client);
 640         struct lp5523_engine *engine = &chip->engines[nr - 1];
 641         mutex_lock(&chip->lock);
 642
 643         if (!strncmp(buf, "run", 3))
 644                 lp5523_set_mode(engine, LP5523_CMD_RUN);
 645         else if (!strncmp(buf, "load", 4))
 646                 lp5523_set_mode(engine, LP5523_CMD_LOAD);
 647         else if (!strncmp(buf, "disabled", 8))
 648                 lp5523_set_mode(engine, LP5523_CMD_DISABLED);
 649
 650         mutex_unlock(&chip->lock);
 651         return len;
 652 }
 653
 654 #define store_mode(nr)                                                  \
 655 static ssize_t store_engine##nr##_mode(struct device *dev,              \
 656                                      struct device_attribute *attr,     \
 657                                      const char *buf, size_t len)       \
 658 {                                                                       \
 659         return store_engine_mode(dev, attr, buf, len, nr);              \
 660 }
 661 store_mode(1)
 662 store_mode(2)
 663 store_mode(3)
 664
 665 static ssize_t show_max_current(struct device *dev,
 666                             struct device_attribute *attr,
 667                             char *buf)
 668 {
 669         struct led_classdev *led_cdev = dev_get_drvdata(dev);
 670         struct lp5523_led *led = cdev_to_led(led_cdev);
 671
 672         return sprintf(buf, "%d\n", led->max_current);
 673 }
 674
 675 static ssize_t show_current(struct device *dev,
 676                             struct device_attribute *attr,
 677                             char *buf)
 678 {
 679         struct led_classdev *led_cdev = dev_get_drvdata(dev);
 680         struct lp5523_led *led = cdev_to_led(led_cdev);
 681
 682         return sprintf(buf, "%d\n", led->led_current);
 683 }
 684
 685 static ssize_t store_current(struct device *dev,
 686                              struct device_attribute *attr,
 687                              const char *buf, size_t len)
 688 {
 689         struct led_classdev *led_cdev = dev_get_drvdata(dev);
 690         struct lp5523_led *led = cdev_to_led(led_cdev);
 691         struct lp5523_chip *chip = led_to_lp5523(led);
 692         ssize_t ret;
 693         unsigned long curr;
 694
 695         if (strict_strtoul(buf, 0, &curr))
 696                 return -EINVAL;
 697
 698         if (curr > led->max_current)
 699                 return -EINVAL;
 700
 701         mutex_lock(&chip->lock);
 702         ret = lp5523_write(chip->client,
 703                         LP5523_REG_LED_CURRENT_BASE + led->chan_nr,
 704                         (u8)curr);
 705         mutex_unlock(&chip->lock);
 706
 707         if (ret < 0)
 708                 return ret;
 709
 710         led->led_current = (u8)curr;
 711
 712         return len;
 713 }
 714
 715 /* led class device attributes */
 716 static DEVICE_ATTR(led_current, S_IRUGO | S_IWUSR, show_current, store_current);
 717 static DEVICE_ATTR(max_current, S_IRUGO , show_max_current, NULL);
 718
 719 static struct attribute *lp5523_led_attributes[] = {
 720         &dev_attr_led_current.attr,
 721         &dev_attr_max_current.attr,
 722         NULL,
 723 };
 724
 725 static struct attribute_group lp5523_led_attribute_group = {
 726         .attrs = lp5523_led_attributes
 727 };
 728
 729 /* device attributes */
 730 static DEVICE_ATTR(engine1_mode, S_IRUGO | S_IWUSR,
 731                    show_engine1_mode, store_engine1_mode);
 732 static DEVICE_ATTR(engine2_mode, S_IRUGO | S_IWUSR,
 733                    show_engine2_mode, store_engine2_mode);
 734 static DEVICE_ATTR(engine3_mode, S_IRUGO | S_IWUSR,
 735                    show_engine3_mode, store_engine3_mode);
 736 static DEVICE_ATTR(engine1_leds, S_IRUGO | S_IWUSR,
 737                    show_engine1_leds, store_engine1_leds);
 738 static DEVICE_ATTR(engine2_leds, S_IRUGO | S_IWUSR,
 739                    show_engine2_leds, store_engine2_leds);
 740 static DEVICE_ATTR(engine3_leds, S_IRUGO | S_IWUSR,
 741                    show_engine3_leds, store_engine3_leds);
 742 static DEVICE_ATTR(engine1_load, S_IWUSR, NULL, store_engine1_load);
 743 static DEVICE_ATTR(engine2_load, S_IWUSR, NULL, store_engine2_load);
 744 static DEVICE_ATTR(engine3_load, S_IWUSR, NULL, store_engine3_load);
 745 static DEVICE_ATTR(selftest, S_IRUGO, lp5523_selftest, NULL);
 746
 747 static struct attribute *lp5523_attributes[] = {
 748         &dev_attr_engine1_mode.attr,
 749         &dev_attr_engine2_mode.attr,
 750         &dev_attr_engine3_mode.attr,
 751         &dev_attr_selftest.attr,
 752         &dev_attr_engine1_load.attr,
 753         &dev_attr_engine1_leds.attr,
 754         &dev_attr_engine2_load.attr,
 755         &dev_attr_engine2_leds.attr,
 756         &dev_attr_engine3_load.attr,
 757         &dev_attr_engine3_leds.attr,
 758 };
 759
 760 static const struct attribute_group lp5523_group = {
 761         .attrs = lp5523_attributes,
 762 };
 763
 764 static int lp5523_register_sysfs(struct i2c_client *client)
 765 {
 766         struct device *dev = &client->dev;
 767         int ret;
 768
 769         ret = sysfs_create_group(&dev->kobj, &lp5523_group);
 770         if (ret < 0)
 771                 return ret;
 772
 773         return 0;
 774 }
 775
 776 static void lp5523_unregister_sysfs(struct i2c_client *client)
 777 {
 778         struct lp5523_chip *chip = i2c_get_clientdata(client);
 779         struct device *dev = &client->dev;
 780         int i;
 781
 782         sysfs_remove_group(&dev->kobj, &lp5523_group);
 783
 784         for (i = 0; i < chip->num_leds; i++)
 785                 sysfs_remove_group(&chip->leds[i].cdev.dev->kobj,
 786                                 &lp5523_led_attribute_group);
 787 }
 788
 789 /*--------------------------------------------------------------*/
 790 /*                      Set chip operating mode                 */
 791 /*--------------------------------------------------------------*/
 792 static int lp5523_set_mode(struct lp5523_engine *engine, u8 mode)
 793 {
 794         int ret = 0;
 795
 796         /* if in that mode already do nothing, except for run */
 797         if (mode == engine->mode && mode != LP5523_CMD_RUN)
 798                 return 0;
 799
 800         if (mode == LP5523_CMD_RUN) {
 801                 ret = lp5523_run_program(engine);
 802         } else if (mode == LP5523_CMD_LOAD) {
 803                 lp5523_set_engine_mode(engine, LP5523_CMD_DISABLED);
 804                 lp5523_set_engine_mode(engine, LP5523_CMD_LOAD);
 805         } else if (mode == LP5523_CMD_DISABLED) {
 806                 lp5523_set_engine_mode(engine, LP5523_CMD_DISABLED);
 807         }
 808
 809         engine->mode = mode;
 810
 811         return ret;
 812 }
 813
 814 /*--------------------------------------------------------------*/
 815 /*                      Probe, Attach, Remove                   */
 816 /*--------------------------------------------------------------*/
 817 static int __init lp5523_init_engine(struct lp5523_engine *engine, int id)
 818 {
 819         if (id < 1 || id > LP5523_ENGINES)
 820                 return -1;
 821         engine->id = id;
 822         engine->engine_mask = LP5523_ENG_MASK_BASE >> SHIFT_MASK(id);
 823         engine->prog_page = id - 1;
 824         engine->mux_page = id + 2;
 825
 826         return 0;
 827 }
 828
 829 static int __devinit lp5523_init_led(struct lp5523_led *led, struct device *dev,
 830                            int chan, struct lp5523_platform_data *pdata)
 831 {
 832         char name[32];
 833         int res;
 834
 835         if (chan >= LP5523_LEDS)
 836                 return -EINVAL;
 837
 838         if (pdata->led_config[chan].led_current) {
 839                 led->led_current = pdata->led_config[chan].led_current;
 840                 led->max_current = pdata->led_config[chan].max_current;
 841                 led->chan_nr = pdata->led_config[chan].chan_nr;
 842
 843                 if (led->chan_nr >= LP5523_LEDS) {
 844                         dev_err(dev, "Use channel numbers between 0 and %d\n",
 845                                 LP5523_LEDS - 1);
 846                         return -EINVAL;
 847                 }
 848
 849                 snprintf(name, sizeof(name), "%s:channel%d",
 850                         pdata->label ?: "lp5523", chan);
 851
 852                 led->cdev.name = name;
 853                 led->cdev.brightness_set = lp5523_set_brightness;
 854                 res = led_classdev_register(dev, &led->cdev);
 855                 if (res < 0) {
 856                         dev_err(dev, "couldn't register led on channel %d\n",
 857                                 chan);
 858                         return res;
 859                 }
 860                 res = sysfs_create_group(&led->cdev.dev->kobj,
 861                                 &lp5523_led_attribute_group);
 862                 if (res < 0) {
 863                         dev_err(dev, "couldn't register current attribute\n");
 864                         led_classdev_unregister(&led->cdev);
 865                         return res;
 866                 }
 867         } else {
 868                 led->led_current = 0;
 869         }
 870         return 0;
 871 }
 872
 873 static struct i2c_driver lp5523_driver;
 874
 875 static int __devinit lp5523_probe(struct i2c_client *client,
 876                         const struct i2c_device_id *id)
 877 {
 878         struct lp5523_chip              *chip;
 879         struct lp5523_platform_data     *pdata;
 880         int ret, i, led;
 881
 882         chip = kzalloc(sizeof(*chip), GFP_KERNEL);
 883         if (!chip)
 884                 return -ENOMEM;
 885
 886         i2c_set_clientdata(client, chip);
 887         chip->client = client;
 888
 889         pdata = client->dev.platform_data;
 890
 891         if (!pdata) {
 892                 dev_err(&client->dev, "no platform data\n");
 893                 ret = -EINVAL;
 894                 goto fail1;
 895         }
 896
 897         mutex_init(&chip->lock);
 898
 899         chip->pdata   = pdata;
 900
 901         if (pdata->setup_resources) {
 902                 ret = pdata->setup_resources();
 903                 if (ret < 0)
 904                         goto fail1;
 905         }
 906
 907         if (pdata->enable) {
 908                 pdata->enable(0);
 909                 usleep_range(1000, 2000); /* Keep enable down at least 1ms */
 910                 pdata->enable(1);
 911                 usleep_range(1000, 2000); /* 500us abs min. */
 912         }
 913
 914         lp5523_write(client, LP5523_REG_RESET, 0xff);
 915         usleep_range(10000, 20000); /*
 916                                      * Exact value is not available. 10 - 20ms
 917                                      * appears to be enough for reset.
 918                                      */
 919         ret = lp5523_detect(client);
 920         if (ret)
 921                 goto fail2;
 922
 923         dev_info(&client->dev, "LP5523 Programmable led chip found\n");
 924
 925         /* Initialize engines */
 926         for (i = 0; i < ARRAY_SIZE(chip->engines); i++) {
 927                 ret = lp5523_init_engine(&chip->engines[i], i + 1);
 928                 if (ret) {
 929                         dev_err(&client->dev, "error initializing engine\n");
 930                         goto fail2;
 931                 }
 932         }
 933         ret = lp5523_configure(client);
 934         if (ret < 0) {
 935                 dev_err(&client->dev, "error configuring chip\n");
 936                 goto fail2;
 937         }
 938
 939         /* Initialize leds */
 940         chip->num_channels = pdata->num_channels;
 941         chip->num_leds = 0;
 942         led = 0;
 943         for (i = 0; i < pdata->num_channels; i++) {
 944                 /* Do not initialize channels that are not connected */
 945                 if (pdata->led_config[i].led_current == 0)
 946                         continue;
 947
 948                 ret = lp5523_init_led(&chip->leds[led], &client->dev, i, pdata);
 949                 if (ret) {
 950                         dev_err(&client->dev, "error initializing leds\n");
 951                         goto fail3;
 952                 }
 953                 chip->num_leds++;
 954
 955                 chip->leds[led].id = led;
 956                 /* Set LED current */
 957                 lp5523_write(client,
 958                           LP5523_REG_LED_CURRENT_BASE + chip->leds[led].chan_nr,
 959                           chip->leds[led].led_current);
 960
 961                 INIT_WORK(&(chip->leds[led].brightness_work),
 962                         lp5523_led_brightness_work);
 963
 964                 led++;
 965         }
 966
 967         ret = lp5523_register_sysfs(client);
 968         if (ret) {
 969                 dev_err(&client->dev, "registering sysfs failed\n");
 970                 goto fail3;
 971         }
 972         return ret;
 973 fail3:
 974         for (i = 0; i < chip->num_leds; i++) {
 975                 led_classdev_unregister(&chip->leds[i].cdev);
 976                 cancel_work_sync(&chip->leds[i].brightness_work);
 977         }
 978 fail2:
 979         if (pdata->enable)
 980                 pdata->enable(0);
 981         if (pdata->release_resources)
 982                 pdata->release_resources();
 983 fail1:
 984         kfree(chip);
 985         return ret;
 986 }
 987
 988 static int lp5523_remove(struct i2c_client *client)
 989 {
 990         struct lp5523_chip *chip = i2c_get_clientdata(client);
 991         int i;
 992
 993         lp5523_unregister_sysfs(client);
 994
 995         for (i = 0; i < chip->num_leds; i++) {
 996                 led_classdev_unregister(&chip->leds[i].cdev);
 997                 cancel_work_sync(&chip->leds[i].brightness_work);
 998         }
 999
1000         if (chip->pdata->enable)
1001                 chip->pdata->enable(0);
1002         if (chip->pdata->release_resources)
1003                 chip->pdata->release_resources();
1004         kfree(chip);
1005         return 0;
1006 }
1007
1008 static const struct i2c_device_id lp5523_id[] = {
1009         { "lp5523", 0 },
1010         { }
1011 };
1012
1013 MODULE_DEVICE_TABLE(i2c, lp5523_id);
1014
1015 static struct i2c_driver lp5523_driver = {
1016         .driver = {
1017                 .name   = "lp5523",
1018         },
1019         .probe          = lp5523_probe,
1020         .remove         = lp5523_remove,
1021         .id_table       = lp5523_id,
1022 };
1023
1024 static int __init lp5523_init(void)
1025 {
1026         int ret;
1027
1028         ret = i2c_add_driver(&lp5523_driver);
1029
1030         if (ret < 0)
1031                 printk(KERN_ALERT "Adding lp5523 driver failed\n");
1032
1033         return ret;
1034 }
1035
1036 static void __exit lp5523_exit(void)
1037 {
1038         i2c_del_driver(&lp5523_driver);
1039 }
1040
1041 module_init(lp5523_init);
1042 module_exit(lp5523_exit);
1043
1044 MODULE_AUTHOR("Mathias Nyman <mathias.nyman@nokia.com>");
1045 MODULE_DESCRIPTION("LP5523 LED engine");
1046 MODULE_LICENSE("GPL");