[CPUFREQ] Powernow-k8: support family 0xf with 2 low p-states
[pandora-kernel.git] / drivers / input / mouse / gpio_mouse.c
1 /*
2  * Driver for simulating a mouse on GPIO lines.
3  *
4  * Copyright (C) 2007 Atmel Corporation
5  *
6  * This program is free software; you can redistribute it and/or modify
7  * it under the terms of the GNU General Public License version 2 as
8  * published by the Free Software Foundation.
9  */
10
11 #include <linux/init.h>
12 #include <linux/module.h>
13 #include <linux/platform_device.h>
14 #include <linux/input-polldev.h>
15 #include <linux/gpio_mouse.h>
16
17 #include <asm/gpio.h>
18
19 /*
20  * Timer function which is run every scan_ms ms when the device is opened.
21  * The dev input variable is set to the the input_dev pointer.
22  */
23 static void gpio_mouse_scan(struct input_polled_dev *dev)
24 {
25         struct gpio_mouse_platform_data *gpio = dev->private;
26         struct input_dev *input = dev->input;
27         int x, y;
28
29         if (gpio->bleft >= 0)
30                 input_report_key(input, BTN_LEFT,
31                                 gpio_get_value(gpio->bleft) ^ gpio->polarity);
32         if (gpio->bmiddle >= 0)
33                 input_report_key(input, BTN_MIDDLE,
34                                 gpio_get_value(gpio->bmiddle) ^ gpio->polarity);
35         if (gpio->bright >= 0)
36                 input_report_key(input, BTN_RIGHT,
37                                 gpio_get_value(gpio->bright) ^ gpio->polarity);
38
39         x = (gpio_get_value(gpio->right) ^ gpio->polarity)
40                 - (gpio_get_value(gpio->left) ^ gpio->polarity);
41         y = (gpio_get_value(gpio->down) ^ gpio->polarity)
42                 - (gpio_get_value(gpio->up) ^ gpio->polarity);
43
44         input_report_rel(input, REL_X, x);
45         input_report_rel(input, REL_Y, y);
46         input_sync(input);
47 }
48
49 static int __init gpio_mouse_probe(struct platform_device *pdev)
50 {
51         struct gpio_mouse_platform_data *pdata = pdev->dev.platform_data;
52         struct input_polled_dev *input_poll;
53         struct input_dev *input;
54         int pin, i;
55         int error;
56
57         if (!pdata) {
58                 dev_err(&pdev->dev, "no platform data\n");
59                 error = -ENXIO;
60                 goto out;
61         }
62
63         if (pdata->scan_ms < 0) {
64                 dev_err(&pdev->dev, "invalid scan time\n");
65                 error = -EINVAL;
66                 goto out;
67         }
68
69         for (i = 0; i < GPIO_MOUSE_PIN_MAX; i++) {
70                 pin = pdata->pins[i];
71
72                 if (pin < 0) {
73
74                         if (i <= GPIO_MOUSE_PIN_RIGHT) {
75                                 /* Mouse direction is required. */
76                                 dev_err(&pdev->dev,
77                                         "missing GPIO for directions\n");
78                                 error = -EINVAL;
79                                 goto out_free_gpios;
80                         }
81
82                         if (i == GPIO_MOUSE_PIN_BLEFT)
83                                 dev_dbg(&pdev->dev, "no left button defined\n");
84
85                 } else {
86                         error = gpio_request(pin, "gpio_mouse");
87                         if (error) {
88                                 dev_err(&pdev->dev, "fail %d pin (%d idx)\n",
89                                         pin, i);
90                                 goto out_free_gpios;
91                         }
92
93                         gpio_direction_input(pin);
94                 }
95         }
96
97         input_poll = input_allocate_polled_device();
98         if (!input_poll) {
99                 dev_err(&pdev->dev, "not enough memory for input device\n");
100                 error = -ENOMEM;
101                 goto out_free_gpios;
102         }
103
104         platform_set_drvdata(pdev, input_poll);
105
106         /* set input-polldev handlers */
107         input_poll->private = pdata;
108         input_poll->poll = gpio_mouse_scan;
109         input_poll->poll_interval = pdata->scan_ms;
110
111         input = input_poll->input;
112         input->name = pdev->name;
113         input->id.bustype = BUS_HOST;
114         input->dev.parent = &pdev->dev;
115
116         input_set_capability(input, EV_REL, REL_X);
117         input_set_capability(input, EV_REL, REL_Y);
118         if (pdata->bleft >= 0)
119                 input_set_capability(input, EV_KEY, BTN_LEFT);
120         if (pdata->bmiddle >= 0)
121                 input_set_capability(input, EV_KEY, BTN_MIDDLE);
122         if (pdata->bright >= 0)
123                 input_set_capability(input, EV_KEY, BTN_RIGHT);
124
125         error = input_register_polled_device(input_poll);
126         if (error) {
127                 dev_err(&pdev->dev, "could not register input device\n");
128                 goto out_free_polldev;
129         }
130
131         dev_dbg(&pdev->dev, "%d ms scan time, buttons: %s%s%s\n",
132                         pdata->scan_ms,
133                         pdata->bleft < 0 ? "" : "left ",
134                         pdata->bmiddle < 0 ? "" : "middle ",
135                         pdata->bright < 0 ? "" : "right");
136
137         return 0;
138
139  out_free_polldev:
140         input_free_polled_device(input_poll);
141         platform_set_drvdata(pdev, NULL);
142
143  out_free_gpios:
144         while (--i >= 0) {
145                 pin = pdata->pins[i];
146                 if (pin)
147                         gpio_free(pin);
148         }
149  out:
150         return error;
151 }
152
153 static int __devexit gpio_mouse_remove(struct platform_device *pdev)
154 {
155         struct input_polled_dev *input = platform_get_drvdata(pdev);
156         struct gpio_mouse_platform_data *pdata = input->private;
157         int pin, i;
158
159         input_unregister_polled_device(input);
160         input_free_polled_device(input);
161
162         for (i = 0; i < GPIO_MOUSE_PIN_MAX; i++) {
163                 pin = pdata->pins[i];
164                 if (pin >= 0)
165                         gpio_free(pin);
166         }
167
168         platform_set_drvdata(pdev, NULL);
169
170         return 0;
171 }
172
173 /* work with hotplug and coldplug */
174 MODULE_ALIAS("platform:gpio_mouse");
175
176 static struct platform_driver gpio_mouse_device_driver = {
177         .remove         = __devexit_p(gpio_mouse_remove),
178         .driver         = {
179                 .name   = "gpio_mouse",
180                 .owner  = THIS_MODULE,
181         }
182 };
183
184 static int __init gpio_mouse_init(void)
185 {
186         return platform_driver_probe(&gpio_mouse_device_driver,
187                         gpio_mouse_probe);
188 }
189 module_init(gpio_mouse_init);
190
191 static void __exit gpio_mouse_exit(void)
192 {
193         platform_driver_unregister(&gpio_mouse_device_driver);
194 }
195 module_exit(gpio_mouse_exit);
196
197 MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
198 MODULE_DESCRIPTION("GPIO mouse driver");
199 MODULE_LICENSE("GPL");