drivers/input/misc/cm109.c

   1 /*
   2  * Driver for the VoIP USB phones with CM109 chipsets.
   3  *
   4  * Copyright (C) 2007 - 2008 Alfred E. Heggestad <aeh@db.org>
   5  *
   6  *      This program is free software; you can redistribute it and/or
   7  *      modify it under the terms of the GNU General Public License as
   8  *      published by the Free Software Foundation, version 2.
   9  */
  10
  11 /*
  12  *   Tested devices:
  13  *      - Komunikate KIP1000
  14  *      - Genius G-talk
  15  *      - Allied-Telesis Corega USBPH01
  16  *      - ...
  17  *
  18  * This driver is based on the yealink.c driver
  19  *
  20  * Thanks to:
  21  *   - Authors of yealink.c
  22  *   - Thomas Reitmayr
  23  *   - Oliver Neukum for good review comments and code
  24  *   - Shaun Jackman <sjackman@gmail.com> for Genius G-talk keymap
  25  *   - Dmitry Torokhov for valuable input and review
  26  *
  27  * Todo:
  28  *   - Read/write EEPROM
  29  */
  30
  31 #include <linux/kernel.h>
  32 #include <linux/init.h>
  33 #include <linux/slab.h>
  34 #include <linux/module.h>
  35 #include <linux/moduleparam.h>
  36 #include <linux/rwsem.h>
  37 #include <linux/usb/input.h>
  38
  39 #define DRIVER_VERSION "20080805"
  40 #define DRIVER_AUTHOR  "Alfred E. Heggestad"
  41 #define DRIVER_DESC    "CM109 phone driver"
  42
  43 static char *phone = "kip1000";
  44 module_param(phone, charp, S_IRUSR);
  45 MODULE_PARM_DESC(phone, "Phone name {kip1000, gtalk, usbph01, atcom}");
  46
  47 enum {
  48         /* HID Registers */
  49         HID_IR0 = 0x00, /* Record/Playback-mute button, Volume up/down  */
  50         HID_IR1 = 0x01, /* GPI, generic registers or EEPROM_DATA0       */
  51         HID_IR2 = 0x02, /* Generic registers or EEPROM_DATA1            */
  52         HID_IR3 = 0x03, /* Generic registers or EEPROM_CTRL             */
  53         HID_OR0 = 0x00, /* Mapping control, buzzer, SPDIF (offset 0x04) */
  54         HID_OR1 = 0x01, /* GPO - General Purpose Output                 */
  55         HID_OR2 = 0x02, /* Set GPIO to input/output mode                */
  56         HID_OR3 = 0x03, /* SPDIF status channel or EEPROM_CTRL          */
  57
  58         /* HID_IR0 */
  59         RECORD_MUTE   = 1 << 3,
  60         PLAYBACK_MUTE = 1 << 2,
  61         VOLUME_DOWN   = 1 << 1,
  62         VOLUME_UP     = 1 << 0,
  63
  64         /* HID_OR0 */
  65         /* bits 7-6
  66            0: HID_OR1-2 are used for GPO; HID_OR0, 3 are used for buzzer
  67               and SPDIF
  68            1: HID_OR0-3 are used as generic HID registers
  69            2: Values written to HID_OR0-3 are also mapped to MCU_CTRL,
  70               EEPROM_DATA0-1, EEPROM_CTRL (see Note)
  71            3: Reserved
  72          */
  73         HID_OR_GPO_BUZ_SPDIF   = 0 << 6,
  74         HID_OR_GENERIC_HID_REG = 1 << 6,
  75         HID_OR_MAP_MCU_EEPROM  = 2 << 6,
  76
  77         BUZZER_ON = 1 << 5,
  78
  79         /* up to 256 normal keys, up to 16 special keys */
  80         KEYMAP_SIZE = 256 + 16,
  81 };
  82
  83 /* CM109 protocol packet */
  84 struct cm109_ctl_packet {
  85         u8 byte[4];
  86 } __attribute__ ((packed));
  87
  88 enum { USB_PKT_LEN = sizeof(struct cm109_ctl_packet) };
  89
  90 /* CM109 device structure */
  91 struct cm109_dev {
  92         struct input_dev *idev;  /* input device */
  93         struct usb_device *udev; /* usb device */
  94         struct usb_interface *intf;
  95
  96         /* irq input channel */
  97         struct cm109_ctl_packet *irq_data;
  98         dma_addr_t irq_dma;
  99         struct urb *urb_irq;
 100
 101         /* control output channel */
 102         struct cm109_ctl_packet *ctl_data;
 103         dma_addr_t ctl_dma;
 104         struct usb_ctrlrequest *ctl_req;
 105         struct urb *urb_ctl;
 106         /*
 107          * The 3 bitfields below are protected by ctl_submit_lock.
 108          * They have to be separate since they are accessed from IRQ
 109          * context.
 110          */
 111         unsigned irq_urb_pending:1;     /* irq_urb is in flight */
 112         unsigned ctl_urb_pending:1;     /* ctl_urb is in flight */
 113         unsigned buzzer_pending:1;      /* need to issue buzz command */
 114         spinlock_t ctl_submit_lock;
 115
 116         unsigned char buzzer_state;     /* on/off */
 117
 118         /* flags */
 119         unsigned open:1;
 120         unsigned resetting:1;
 121         unsigned shutdown:1;
 122
 123         /* This mutex protects writes to the above flags */
 124         struct mutex pm_mutex;
 125
 126         unsigned short keymap[KEYMAP_SIZE];
 127
 128         char phys[64];          /* physical device path */
 129         int key_code;           /* last reported key */
 130         int keybit;             /* 0=new scan  1,2,4,8=scan columns  */
 131         u8 gpi;                 /* Cached value of GPI (high nibble) */
 132 };
 133
 134 /******************************************************************************
 135  * CM109 key interface
 136  *****************************************************************************/
 137
 138 static unsigned short special_keymap(int code)
 139 {
 140         if (code > 0xff) {
 141                 switch (code - 0xff) {
 142                 case RECORD_MUTE:       return KEY_MUTE;
 143                 case PLAYBACK_MUTE:     return KEY_MUTE;
 144                 case VOLUME_DOWN:       return KEY_VOLUMEDOWN;
 145                 case VOLUME_UP:         return KEY_VOLUMEUP;
 146                 }
 147         }
 148         return KEY_RESERVED;
 149 }
 150
 151 /* Map device buttons to internal key events.
 152  *
 153  * The "up" and "down" keys, are symbolised by arrows on the button.
 154  * The "pickup" and "hangup" keys are symbolised by a green and red phone
 155  * on the button.
 156
 157  Komunikate KIP1000 Keyboard Matrix
 158
 159      -> -- 1 -- 2 -- 3  --> GPI pin 4 (0x10)
 160       |    |    |    |
 161      <- -- 4 -- 5 -- 6  --> GPI pin 5 (0x20)
 162       |    |    |    |
 163      END - 7 -- 8 -- 9  --> GPI pin 6 (0x40)
 164       |    |    |    |
 165      OK -- * -- 0 -- #  --> GPI pin 7 (0x80)
 166       |    |    |    |
 167
 168      /|\  /|\  /|\  /|\
 169       |    |    |    |
 170 GPO
 171 pin:  3    2    1    0
 172      0x8  0x4  0x2  0x1
 173
 174  */
 175 static unsigned short keymap_kip1000(int scancode)
 176 {
 177         switch (scancode) {                             /* phone key:   */
 178         case 0x82: return KEY_NUMERIC_0;                /*   0          */
 179         case 0x14: return KEY_NUMERIC_1;                /*   1          */
 180         case 0x12: return KEY_NUMERIC_2;                /*   2          */
 181         case 0x11: return KEY_NUMERIC_3;                /*   3          */
 182         case 0x24: return KEY_NUMERIC_4;                /*   4          */
 183         case 0x22: return KEY_NUMERIC_5;                /*   5          */
 184         case 0x21: return KEY_NUMERIC_6;                /*   6          */
 185         case 0x44: return KEY_NUMERIC_7;                /*   7          */
 186         case 0x42: return KEY_NUMERIC_8;                /*   8          */
 187         case 0x41: return KEY_NUMERIC_9;                /*   9          */
 188         case 0x81: return KEY_NUMERIC_POUND;            /*   #          */
 189         case 0x84: return KEY_NUMERIC_STAR;             /*   *          */
 190         case 0x88: return KEY_ENTER;                    /*   pickup     */
 191         case 0x48: return KEY_ESC;                      /*   hangup     */
 192         case 0x28: return KEY_LEFT;                     /*   IN         */
 193         case 0x18: return KEY_RIGHT;                    /*   OUT        */
 194         default:   return special_keymap(scancode);
 195         }
 196 }
 197
 198 /*
 199   Contributed by Shaun Jackman <sjackman@gmail.com>
 200
 201   Genius G-Talk keyboard matrix
 202      0 1 2 3
 203   4: 0 4 8 Talk
 204   5: 1 5 9 End
 205   6: 2 6 # Up
 206   7: 3 7 * Down
 207 */
 208 static unsigned short keymap_gtalk(int scancode)
 209 {
 210         switch (scancode) {
 211         case 0x11: return KEY_NUMERIC_0;
 212         case 0x21: return KEY_NUMERIC_1;
 213         case 0x41: return KEY_NUMERIC_2;
 214         case 0x81: return KEY_NUMERIC_3;
 215         case 0x12: return KEY_NUMERIC_4;
 216         case 0x22: return KEY_NUMERIC_5;
 217         case 0x42: return KEY_NUMERIC_6;
 218         case 0x82: return KEY_NUMERIC_7;
 219         case 0x14: return KEY_NUMERIC_8;
 220         case 0x24: return KEY_NUMERIC_9;
 221         case 0x44: return KEY_NUMERIC_POUND;    /* # */
 222         case 0x84: return KEY_NUMERIC_STAR;     /* * */
 223         case 0x18: return KEY_ENTER;            /* Talk (green handset) */
 224         case 0x28: return KEY_ESC;              /* End (red handset) */
 225         case 0x48: return KEY_UP;               /* Menu up (rocker switch) */
 226         case 0x88: return KEY_DOWN;             /* Menu down (rocker switch) */
 227         default:   return special_keymap(scancode);
 228         }
 229 }
 230
 231 /*
 232  * Keymap for Allied-Telesis Corega USBPH01
 233  * http://www.alliedtelesis-corega.com/2/1344/1437/1360/chprd.html
 234  *
 235  * Contributed by july@nat.bg
 236  */
 237 static unsigned short keymap_usbph01(int scancode)
 238 {
 239         switch (scancode) {
 240         case 0x11: return KEY_NUMERIC_0;                /*   0          */
 241         case 0x21: return KEY_NUMERIC_1;                /*   1          */
 242         case 0x41: return KEY_NUMERIC_2;                /*   2          */
 243         case 0x81: return KEY_NUMERIC_3;                /*   3          */
 244         case 0x12: return KEY_NUMERIC_4;                /*   4          */
 245         case 0x22: return KEY_NUMERIC_5;                /*   5          */
 246         case 0x42: return KEY_NUMERIC_6;                /*   6          */
 247         case 0x82: return KEY_NUMERIC_7;                /*   7          */
 248         case 0x14: return KEY_NUMERIC_8;                /*   8          */
 249         case 0x24: return KEY_NUMERIC_9;                /*   9          */
 250         case 0x44: return KEY_NUMERIC_POUND;            /*   #          */
 251         case 0x84: return KEY_NUMERIC_STAR;             /*   *          */
 252         case 0x18: return KEY_ENTER;                    /*   pickup     */
 253         case 0x28: return KEY_ESC;                      /*   hangup     */
 254         case 0x48: return KEY_LEFT;                     /*   IN         */
 255         case 0x88: return KEY_RIGHT;                    /*   OUT        */
 256         default:   return special_keymap(scancode);
 257         }
 258 }
 259
 260 /*
 261  * Keymap for ATCom AU-100
 262  * http://www.atcom.cn/products.html
 263  * http://www.packetizer.com/products/au100/
 264  * http://www.voip-info.org/wiki/view/AU-100
 265  *
 266  * Contributed by daniel@gimpelevich.san-francisco.ca.us
 267  */
 268 static unsigned short keymap_atcom(int scancode)
 269 {
 270         switch (scancode) {                             /* phone key:   */
 271         case 0x82: return KEY_NUMERIC_0;                /*   0          */
 272         case 0x11: return KEY_NUMERIC_1;                /*   1          */
 273         case 0x12: return KEY_NUMERIC_2;                /*   2          */
 274         case 0x14: return KEY_NUMERIC_3;                /*   3          */
 275         case 0x21: return KEY_NUMERIC_4;                /*   4          */
 276         case 0x22: return KEY_NUMERIC_5;                /*   5          */
 277         case 0x24: return KEY_NUMERIC_6;                /*   6          */
 278         case 0x41: return KEY_NUMERIC_7;                /*   7          */
 279         case 0x42: return KEY_NUMERIC_8;                /*   8          */
 280         case 0x44: return KEY_NUMERIC_9;                /*   9          */
 281         case 0x84: return KEY_NUMERIC_POUND;            /*   #          */
 282         case 0x81: return KEY_NUMERIC_STAR;             /*   *          */
 283         case 0x18: return KEY_ENTER;                    /*   pickup     */
 284         case 0x28: return KEY_ESC;                      /*   hangup     */
 285         case 0x48: return KEY_LEFT;                     /* left arrow   */
 286         case 0x88: return KEY_RIGHT;                    /* right arrow  */
 287         default:   return special_keymap(scancode);
 288         }
 289 }
 290
 291 static unsigned short (*keymap)(int) = keymap_kip1000;
 292
 293 /*
 294  * Completes a request by converting the data into events for the
 295  * input subsystem.
 296  */
 297 static void report_key(struct cm109_dev *dev, int key)
 298 {
 299         struct input_dev *idev = dev->idev;
 300
 301         if (dev->key_code >= 0) {
 302                 /* old key up */
 303                 input_report_key(idev, dev->key_code, 0);
 304         }
 305
 306         dev->key_code = key;
 307         if (key >= 0) {
 308                 /* new valid key */
 309                 input_report_key(idev, key, 1);
 310         }
 311
 312         input_sync(idev);
 313 }
 314
 315 /******************************************************************************
 316  * CM109 usb communication interface
 317  *****************************************************************************/
 318
 319 static void cm109_submit_buzz_toggle(struct cm109_dev *dev)
 320 {
 321         int error;
 322
 323         if (dev->buzzer_state)
 324                 dev->ctl_data->byte[HID_OR0] |= BUZZER_ON;
 325         else
 326                 dev->ctl_data->byte[HID_OR0] &= ~BUZZER_ON;
 327
 328         error = usb_submit_urb(dev->urb_ctl, GFP_ATOMIC);
 329         if (error)
 330                 err("%s: usb_submit_urb (urb_ctl) failed %d", __func__, error);
 331 }
 332
 333 /*
 334  * IRQ handler
 335  */
 336 static void cm109_urb_irq_callback(struct urb *urb)
 337 {
 338         struct cm109_dev *dev = urb->context;
 339         const int status = urb->status;
 340         int error;
 341
 342         dev_dbg(&urb->dev->dev, "### URB IRQ: [0x%02x 0x%02x 0x%02x 0x%02x] keybit=0x%02x\n",
 343              dev->irq_data->byte[0],
 344              dev->irq_data->byte[1],
 345              dev->irq_data->byte[2],
 346              dev->irq_data->byte[3],
 347              dev->keybit);
 348
 349         if (status) {
 350                 if (status == -ESHUTDOWN)
 351                         return;
 352                 err("%s: urb status %d", __func__, status);
 353         }
 354
 355         /* Special keys */
 356         if (dev->irq_data->byte[HID_IR0] & 0x0f) {
 357                 const int code = (dev->irq_data->byte[HID_IR0] & 0x0f);
 358                 report_key(dev, dev->keymap[0xff + code]);
 359         }
 360
 361         /* Scan key column */
 362         if (dev->keybit == 0xf) {
 363
 364                 /* Any changes ? */
 365                 if ((dev->gpi & 0xf0) == (dev->irq_data->byte[HID_IR1] & 0xf0))
 366                         goto out;
 367
 368                 dev->gpi = dev->irq_data->byte[HID_IR1] & 0xf0;
 369                 dev->keybit = 0x1;
 370         } else {
 371                 report_key(dev, dev->keymap[dev->irq_data->byte[HID_IR1]]);
 372
 373                 dev->keybit <<= 1;
 374                 if (dev->keybit > 0x8)
 375                         dev->keybit = 0xf;
 376         }
 377
 378  out:
 379
 380         spin_lock(&dev->ctl_submit_lock);
 381
 382         dev->irq_urb_pending = 0;
 383
 384         if (likely(!dev->shutdown)) {
 385
 386                 if (dev->buzzer_state)
 387                         dev->ctl_data->byte[HID_OR0] |= BUZZER_ON;
 388                 else
 389                         dev->ctl_data->byte[HID_OR0] &= ~BUZZER_ON;
 390
 391                 dev->ctl_data->byte[HID_OR1] = dev->keybit;
 392                 dev->ctl_data->byte[HID_OR2] = dev->keybit;
 393
 394                 dev->buzzer_pending = 0;
 395                 dev->ctl_urb_pending = 1;
 396
 397                 error = usb_submit_urb(dev->urb_ctl, GFP_ATOMIC);
 398                 if (error)
 399                         err("%s: usb_submit_urb (urb_ctl) failed %d",
 400                                 __func__, error);
 401         }
 402
 403         spin_unlock(&dev->ctl_submit_lock);
 404 }
 405
 406 static void cm109_urb_ctl_callback(struct urb *urb)
 407 {
 408         struct cm109_dev *dev = urb->context;
 409         const int status = urb->status;
 410         int error;
 411
 412         dev_dbg(&urb->dev->dev, "### URB CTL: [0x%02x 0x%02x 0x%02x 0x%02x]\n",
 413              dev->ctl_data->byte[0],
 414              dev->ctl_data->byte[1],
 415              dev->ctl_data->byte[2],
 416              dev->ctl_data->byte[3]);
 417
 418         if (status)
 419                 err("%s: urb status %d", __func__, status);
 420
 421         spin_lock(&dev->ctl_submit_lock);
 422
 423         dev->ctl_urb_pending = 0;
 424
 425         if (likely(!dev->shutdown)) {
 426
 427                 if (dev->buzzer_pending) {
 428                         dev->buzzer_pending = 0;
 429                         dev->ctl_urb_pending = 1;
 430                         cm109_submit_buzz_toggle(dev);
 431                 } else if (likely(!dev->irq_urb_pending)) {
 432                         /* ask for key data */
 433                         dev->irq_urb_pending = 1;
 434                         error = usb_submit_urb(dev->urb_irq, GFP_ATOMIC);
 435                         if (error)
 436                                 err("%s: usb_submit_urb (urb_irq) failed %d",
 437                                         __func__, error);
 438                 }
 439         }
 440
 441         spin_unlock(&dev->ctl_submit_lock);
 442 }
 443
 444 static void cm109_toggle_buzzer_async(struct cm109_dev *dev)
 445 {
 446         unsigned long flags;
 447
 448         spin_lock_irqsave(&dev->ctl_submit_lock, flags);
 449
 450         if (dev->ctl_urb_pending) {
 451                 /* URB completion will resubmit */
 452                 dev->buzzer_pending = 1;
 453         } else {
 454                 dev->ctl_urb_pending = 1;
 455                 cm109_submit_buzz_toggle(dev);
 456         }
 457
 458         spin_unlock_irqrestore(&dev->ctl_submit_lock, flags);
 459 }
 460
 461 static void cm109_toggle_buzzer_sync(struct cm109_dev *dev, int on)
 462 {
 463         int error;
 464
 465         if (on)
 466                 dev->ctl_data->byte[HID_OR0] |= BUZZER_ON;
 467         else
 468                 dev->ctl_data->byte[HID_OR0] &= ~BUZZER_ON;
 469
 470         error = usb_control_msg(dev->udev,
 471                                 usb_sndctrlpipe(dev->udev, 0),
 472                                 dev->ctl_req->bRequest,
 473                                 dev->ctl_req->bRequestType,
 474                                 le16_to_cpu(dev->ctl_req->wValue),
 475                                 le16_to_cpu(dev->ctl_req->wIndex),
 476                                 dev->ctl_data,
 477                                 USB_PKT_LEN, USB_CTRL_SET_TIMEOUT);
 478         if (error < 0 && error != -EINTR)
 479                 err("%s: usb_control_msg() failed %d", __func__, error);
 480 }
 481
 482 static void cm109_stop_traffic(struct cm109_dev *dev)
 483 {
 484         dev->shutdown = 1;
 485         /*
 486          * Make sure other CPUs see this
 487          */
 488         smp_wmb();
 489
 490         usb_kill_urb(dev->urb_ctl);
 491         usb_kill_urb(dev->urb_irq);
 492
 493         cm109_toggle_buzzer_sync(dev, 0);
 494
 495         dev->shutdown = 0;
 496         smp_wmb();
 497 }
 498
 499 static void cm109_restore_state(struct cm109_dev *dev)
 500 {
 501         if (dev->open) {
 502                 /*
 503                  * Restore buzzer state.
 504                  * This will also kick regular URB submission
 505                  */
 506                 cm109_toggle_buzzer_async(dev);
 507         }
 508 }
 509
 510 /******************************************************************************
 511  * input event interface
 512  *****************************************************************************/
 513
 514 static int cm109_input_open(struct input_dev *idev)
 515 {
 516         struct cm109_dev *dev = input_get_drvdata(idev);
 517         int error;
 518
 519         error = usb_autopm_get_interface(dev->intf);
 520         if (error < 0) {
 521                 err("%s - cannot autoresume, result %d",
 522                     __func__, error);
 523                 return error;
 524         }
 525
 526         mutex_lock(&dev->pm_mutex);
 527
 528         dev->buzzer_state = 0;
 529         dev->key_code = -1;     /* no keys pressed */
 530         dev->keybit = 0xf;
 531
 532         /* issue INIT */
 533         dev->ctl_data->byte[HID_OR0] = HID_OR_GPO_BUZ_SPDIF;
 534         dev->ctl_data->byte[HID_OR1] = dev->keybit;
 535         dev->ctl_data->byte[HID_OR2] = dev->keybit;
 536         dev->ctl_data->byte[HID_OR3] = 0x00;
 537
 538         error = usb_submit_urb(dev->urb_ctl, GFP_KERNEL);
 539         if (error)
 540                 err("%s: usb_submit_urb (urb_ctl) failed %d", __func__, error);
 541         else
 542                 dev->open = 1;
 543
 544         mutex_unlock(&dev->pm_mutex);
 545
 546         if (error)
 547                 usb_autopm_put_interface(dev->intf);
 548
 549         return error;
 550 }
 551
 552 static void cm109_input_close(struct input_dev *idev)
 553 {
 554         struct cm109_dev *dev = input_get_drvdata(idev);
 555
 556         mutex_lock(&dev->pm_mutex);
 557
 558         /*
 559          * Once we are here event delivery is stopped so we
 560          * don't need to worry about someone starting buzzer
 561          * again
 562          */
 563         cm109_stop_traffic(dev);
 564         dev->open = 0;
 565
 566         mutex_unlock(&dev->pm_mutex);
 567
 568         usb_autopm_put_interface(dev->intf);
 569 }
 570
 571 static int cm109_input_ev(struct input_dev *idev, unsigned int type,
 572                           unsigned int code, int value)
 573 {
 574         struct cm109_dev *dev = input_get_drvdata(idev);
 575
 576         dev_dbg(&dev->udev->dev,
 577                 "input_ev: type=%u code=%u value=%d\n", type, code, value);
 578
 579         if (type != EV_SND)
 580                 return -EINVAL;
 581
 582         switch (code) {
 583         case SND_TONE:
 584         case SND_BELL:
 585                 dev->buzzer_state = !!value;
 586                 if (!dev->resetting)
 587                         cm109_toggle_buzzer_async(dev);
 588                 return 0;
 589
 590         default:
 591                 return -EINVAL;
 592         }
 593 }
 594
 595
 596 /******************************************************************************
 597  * Linux interface and usb initialisation
 598  *****************************************************************************/
 599
 600 struct driver_info {
 601         char *name;
 602 };
 603
 604 static const struct driver_info info_cm109 = {
 605         .name = "CM109 USB driver",
 606 };
 607
 608 enum {
 609         VENDOR_ID        = 0x0d8c, /* C-Media Electronics */
 610         PRODUCT_ID_CM109 = 0x000e, /* CM109 defines range 0x0008 - 0x000f */
 611 };
 612
 613 /* table of devices that work with this driver */
 614 static const struct usb_device_id cm109_usb_table[] = {
 615         {
 616                 .match_flags = USB_DEVICE_ID_MATCH_DEVICE |
 617                                 USB_DEVICE_ID_MATCH_INT_INFO,
 618                 .idVendor = VENDOR_ID,
 619                 .idProduct = PRODUCT_ID_CM109,
 620                 .bInterfaceClass = USB_CLASS_HID,
 621                 .bInterfaceSubClass = 0,
 622                 .bInterfaceProtocol = 0,
 623                 .driver_info = (kernel_ulong_t) &info_cm109
 624         },
 625         /* you can add more devices here with product ID 0x0008 - 0x000f */
 626         { }
 627 };
 628
 629 static void cm109_usb_cleanup(struct cm109_dev *dev)
 630 {
 631         kfree(dev->ctl_req);
 632         if (dev->ctl_data)
 633                 usb_free_coherent(dev->udev, USB_PKT_LEN,
 634                                   dev->ctl_data, dev->ctl_dma);
 635         if (dev->irq_data)
 636                 usb_free_coherent(dev->udev, USB_PKT_LEN,
 637                                   dev->irq_data, dev->irq_dma);
 638
 639         usb_free_urb(dev->urb_irq);     /* parameter validation in core/urb */
 640         usb_free_urb(dev->urb_ctl);     /* parameter validation in core/urb */
 641         kfree(dev);
 642 }
 643
 644 static void cm109_usb_disconnect(struct usb_interface *interface)
 645 {
 646         struct cm109_dev *dev = usb_get_intfdata(interface);
 647
 648         usb_set_intfdata(interface, NULL);
 649         input_unregister_device(dev->idev);
 650         cm109_usb_cleanup(dev);
 651 }
 652
 653 static int cm109_usb_probe(struct usb_interface *intf,
 654                            const struct usb_device_id *id)
 655 {
 656         struct usb_device *udev = interface_to_usbdev(intf);
 657         struct driver_info *nfo = (struct driver_info *)id->driver_info;
 658         struct usb_host_interface *interface;
 659         struct usb_endpoint_descriptor *endpoint;
 660         struct cm109_dev *dev;
 661         struct input_dev *input_dev = NULL;
 662         int ret, pipe, i;
 663         int error = -ENOMEM;
 664
 665         interface = intf->cur_altsetting;
 666         endpoint = &interface->endpoint[0].desc;
 667
 668         if (!usb_endpoint_is_int_in(endpoint))
 669                 return -ENODEV;
 670
 671         dev = kzalloc(sizeof(*dev), GFP_KERNEL);
 672         if (!dev)
 673                 return -ENOMEM;
 674
 675         spin_lock_init(&dev->ctl_submit_lock);
 676         mutex_init(&dev->pm_mutex);
 677
 678         dev->udev = udev;
 679         dev->intf = intf;
 680
 681         dev->idev = input_dev = input_allocate_device();
 682         if (!input_dev)
 683                 goto err_out;
 684
 685         /* allocate usb buffers */
 686         dev->irq_data = usb_alloc_coherent(udev, USB_PKT_LEN,
 687                                            GFP_KERNEL, &dev->irq_dma);
 688         if (!dev->irq_data)
 689                 goto err_out;
 690
 691         dev->ctl_data = usb_alloc_coherent(udev, USB_PKT_LEN,
 692                                            GFP_KERNEL, &dev->ctl_dma);
 693         if (!dev->ctl_data)
 694                 goto err_out;
 695
 696         dev->ctl_req = kmalloc(sizeof(*(dev->ctl_req)), GFP_KERNEL);
 697         if (!dev->ctl_req)
 698                 goto err_out;
 699
 700         /* allocate urb structures */
 701         dev->urb_irq = usb_alloc_urb(0, GFP_KERNEL);
 702         if (!dev->urb_irq)
 703                 goto err_out;
 704
 705         dev->urb_ctl = usb_alloc_urb(0, GFP_KERNEL);
 706         if (!dev->urb_ctl)
 707                 goto err_out;
 708
 709         /* get a handle to the interrupt data pipe */
 710         pipe = usb_rcvintpipe(udev, endpoint->bEndpointAddress);
 711         ret = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
 712         if (ret != USB_PKT_LEN)
 713                 err("invalid payload size %d, expected %d", ret, USB_PKT_LEN);
 714
 715         /* initialise irq urb */
 716         usb_fill_int_urb(dev->urb_irq, udev, pipe, dev->irq_data,
 717                          USB_PKT_LEN,
 718                          cm109_urb_irq_callback, dev, endpoint->bInterval);
 719         dev->urb_irq->transfer_dma = dev->irq_dma;
 720         dev->urb_irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
 721         dev->urb_irq->dev = udev;
 722
 723         /* initialise ctl urb */
 724         dev->ctl_req->bRequestType = USB_TYPE_CLASS | USB_RECIP_INTERFACE |
 725                                         USB_DIR_OUT;
 726         dev->ctl_req->bRequest = USB_REQ_SET_CONFIGURATION;
 727         dev->ctl_req->wValue = cpu_to_le16(0x200);
 728         dev->ctl_req->wIndex = cpu_to_le16(interface->desc.bInterfaceNumber);
 729         dev->ctl_req->wLength = cpu_to_le16(USB_PKT_LEN);
 730
 731         usb_fill_control_urb(dev->urb_ctl, udev, usb_sndctrlpipe(udev, 0),
 732                              (void *)dev->ctl_req, dev->ctl_data, USB_PKT_LEN,
 733                              cm109_urb_ctl_callback, dev);
 734         dev->urb_ctl->transfer_dma = dev->ctl_dma;
 735         dev->urb_ctl->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
 736         dev->urb_ctl->dev = udev;
 737
 738         /* find out the physical bus location */
 739         usb_make_path(udev, dev->phys, sizeof(dev->phys));
 740         strlcat(dev->phys, "/input0", sizeof(dev->phys));
 741
 742         /* register settings for the input device */
 743         input_dev->name = nfo->name;
 744         input_dev->phys = dev->phys;
 745         usb_to_input_id(udev, &input_dev->id);
 746         input_dev->dev.parent = &intf->dev;
 747
 748         input_set_drvdata(input_dev, dev);
 749         input_dev->open = cm109_input_open;
 750         input_dev->close = cm109_input_close;
 751         input_dev->event = cm109_input_ev;
 752
 753         input_dev->keycode = dev->keymap;
 754         input_dev->keycodesize = sizeof(unsigned char);
 755         input_dev->keycodemax = ARRAY_SIZE(dev->keymap);
 756
 757         input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_SND);
 758         input_dev->sndbit[0] = BIT_MASK(SND_BELL) | BIT_MASK(SND_TONE);
 759
 760         /* register available key events */
 761         for (i = 0; i < KEYMAP_SIZE; i++) {
 762                 unsigned short k = keymap(i);
 763                 dev->keymap[i] = k;
 764                 __set_bit(k, input_dev->keybit);
 765         }
 766         __clear_bit(KEY_RESERVED, input_dev->keybit);
 767
 768         error = input_register_device(dev->idev);
 769         if (error)
 770                 goto err_out;
 771
 772         usb_set_intfdata(intf, dev);
 773
 774         return 0;
 775
 776  err_out:
 777         input_free_device(input_dev);
 778         cm109_usb_cleanup(dev);
 779         return error;
 780 }
 781
 782 static int cm109_usb_suspend(struct usb_interface *intf, pm_message_t message)
 783 {
 784         struct cm109_dev *dev = usb_get_intfdata(intf);
 785
 786         dev_info(&intf->dev, "cm109: usb_suspend (event=%d)\n", message.event);
 787
 788         mutex_lock(&dev->pm_mutex);
 789         cm109_stop_traffic(dev);
 790         mutex_unlock(&dev->pm_mutex);
 791
 792         return 0;
 793 }
 794
 795 static int cm109_usb_resume(struct usb_interface *intf)
 796 {
 797         struct cm109_dev *dev = usb_get_intfdata(intf);
 798
 799         dev_info(&intf->dev, "cm109: usb_resume\n");
 800
 801         mutex_lock(&dev->pm_mutex);
 802         cm109_restore_state(dev);
 803         mutex_unlock(&dev->pm_mutex);
 804
 805         return 0;
 806 }
 807
 808 static int cm109_usb_pre_reset(struct usb_interface *intf)
 809 {
 810         struct cm109_dev *dev = usb_get_intfdata(intf);
 811
 812         mutex_lock(&dev->pm_mutex);
 813
 814         /*
 815          * Make sure input events don't try to toggle buzzer
 816          * while we are resetting
 817          */
 818         dev->resetting = 1;
 819         smp_wmb();
 820
 821         cm109_stop_traffic(dev);
 822
 823         return 0;
 824 }
 825
 826 static int cm109_usb_post_reset(struct usb_interface *intf)
 827 {
 828         struct cm109_dev *dev = usb_get_intfdata(intf);
 829
 830         dev->resetting = 0;
 831         smp_wmb();
 832
 833         cm109_restore_state(dev);
 834
 835         mutex_unlock(&dev->pm_mutex);
 836
 837         return 0;
 838 }
 839
 840 static struct usb_driver cm109_driver = {
 841         .name           = "cm109",
 842         .probe          = cm109_usb_probe,
 843         .disconnect     = cm109_usb_disconnect,
 844         .suspend        = cm109_usb_suspend,
 845         .resume         = cm109_usb_resume,
 846         .reset_resume   = cm109_usb_resume,
 847         .pre_reset      = cm109_usb_pre_reset,
 848         .post_reset     = cm109_usb_post_reset,
 849         .id_table       = cm109_usb_table,
 850         .supports_autosuspend = 1,
 851 };
 852
 853 static int __init cm109_select_keymap(void)
 854 {
 855         /* Load the phone keymap */
 856         if (!strcasecmp(phone, "kip1000")) {
 857                 keymap = keymap_kip1000;
 858                 printk(KERN_INFO KBUILD_MODNAME ": "
 859                         "Keymap for Komunikate KIP1000 phone loaded\n");
 860         } else if (!strcasecmp(phone, "gtalk")) {
 861                 keymap = keymap_gtalk;
 862                 printk(KERN_INFO KBUILD_MODNAME ": "
 863                         "Keymap for Genius G-talk phone loaded\n");
 864         } else if (!strcasecmp(phone, "usbph01")) {
 865                 keymap = keymap_usbph01;
 866                 printk(KERN_INFO KBUILD_MODNAME ": "
 867                         "Keymap for Allied-Telesis Corega USBPH01 phone loaded\n");
 868         } else if (!strcasecmp(phone, "atcom")) {
 869                 keymap = keymap_atcom;
 870                 printk(KERN_INFO KBUILD_MODNAME ": "
 871                         "Keymap for ATCom AU-100 phone loaded\n");
 872         } else {
 873                 printk(KERN_ERR KBUILD_MODNAME ": "
 874                         "Unsupported phone: %s\n", phone);
 875                 return -EINVAL;
 876         }
 877
 878         return 0;
 879 }
 880
 881 static int __init cm109_init(void)
 882 {
 883         int err;
 884
 885         err = cm109_select_keymap();
 886         if (err)
 887                 return err;
 888
 889         err = usb_register(&cm109_driver);
 890         if (err)
 891                 return err;
 892
 893         printk(KERN_INFO KBUILD_MODNAME ": "
 894                 DRIVER_DESC ": " DRIVER_VERSION " (C) " DRIVER_AUTHOR "\n");
 895
 896         return 0;
 897 }
 898
 899 static void __exit cm109_exit(void)
 900 {
 901         usb_deregister(&cm109_driver);
 902 }
 903
 904 module_init(cm109_init);
 905 module_exit(cm109_exit);
 906
 907 MODULE_DEVICE_TABLE(usb, cm109_usb_table);
 908
 909 MODULE_AUTHOR(DRIVER_AUTHOR);
 910 MODULE_DESCRIPTION(DRIVER_DESC);
 911 MODULE_LICENSE("GPL");