Merge branch 'driver-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git...
[pandora-kernel.git] / drivers / input / keyboard / adp5588-keys.c
1 /*
2  * File: drivers/input/keyboard/adp5588_keys.c
3  * Description:  keypad driver for ADP5588 and ADP5587
4  *               I2C QWERTY Keypad and IO Expander
5  * Bugs: Enter bugs at http://blackfin.uclinux.org/
6  *
7  * Copyright (C) 2008-2010 Analog Devices Inc.
8  * Licensed under the GPL-2 or later.
9  */
10
11 #include <linux/module.h>
12 #include <linux/init.h>
13 #include <linux/interrupt.h>
14 #include <linux/irq.h>
15 #include <linux/workqueue.h>
16 #include <linux/errno.h>
17 #include <linux/pm.h>
18 #include <linux/platform_device.h>
19 #include <linux/input.h>
20 #include <linux/i2c.h>
21 #include <linux/gpio.h>
22 #include <linux/slab.h>
23
24 #include <linux/i2c/adp5588.h>
25
26 /* Key Event Register xy */
27 #define KEY_EV_PRESSED          (1 << 7)
28 #define KEY_EV_MASK             (0x7F)
29
30 #define KP_SEL(x)               (0xFFFF >> (16 - x))    /* 2^x-1 */
31
32 #define KEYP_MAX_EVENT          10
33
34 /*
35  * Early pre 4.0 Silicon required to delay readout by at least 25ms,
36  * since the Event Counter Register updated 25ms after the interrupt
37  * asserted.
38  */
39 #define WA_DELAYED_READOUT_REVID(rev)           ((rev) < 4)
40
41 struct adp5588_kpad {
42         struct i2c_client *client;
43         struct input_dev *input;
44         struct delayed_work work;
45         unsigned long delay;
46         unsigned short keycode[ADP5588_KEYMAPSIZE];
47         const struct adp5588_gpi_map *gpimap;
48         unsigned short gpimapsize;
49 #ifdef CONFIG_GPIOLIB
50         unsigned char gpiomap[ADP5588_MAXGPIO];
51         bool export_gpio;
52         struct gpio_chip gc;
53         struct mutex gpio_lock; /* Protect cached dir, dat_out */
54         u8 dat_out[3];
55         u8 dir[3];
56 #endif
57 };
58
59 static int adp5588_read(struct i2c_client *client, u8 reg)
60 {
61         int ret = i2c_smbus_read_byte_data(client, reg);
62
63         if (ret < 0)
64                 dev_err(&client->dev, "Read Error\n");
65
66         return ret;
67 }
68
69 static int adp5588_write(struct i2c_client *client, u8 reg, u8 val)
70 {
71         return i2c_smbus_write_byte_data(client, reg, val);
72 }
73
74 #ifdef CONFIG_GPIOLIB
75 static int adp5588_gpio_get_value(struct gpio_chip *chip, unsigned off)
76 {
77         struct adp5588_kpad *kpad = container_of(chip, struct adp5588_kpad, gc);
78         unsigned int bank = ADP5588_BANK(kpad->gpiomap[off]);
79         unsigned int bit = ADP5588_BIT(kpad->gpiomap[off]);
80
81         return !!(adp5588_read(kpad->client, GPIO_DAT_STAT1 + bank) & bit);
82 }
83
84 static void adp5588_gpio_set_value(struct gpio_chip *chip,
85                                    unsigned off, int val)
86 {
87         struct adp5588_kpad *kpad = container_of(chip, struct adp5588_kpad, gc);
88         unsigned int bank = ADP5588_BANK(kpad->gpiomap[off]);
89         unsigned int bit = ADP5588_BIT(kpad->gpiomap[off]);
90
91         mutex_lock(&kpad->gpio_lock);
92
93         if (val)
94                 kpad->dat_out[bank] |= bit;
95         else
96                 kpad->dat_out[bank] &= ~bit;
97
98         adp5588_write(kpad->client, GPIO_DAT_OUT1 + bank,
99                            kpad->dat_out[bank]);
100
101         mutex_unlock(&kpad->gpio_lock);
102 }
103
104 static int adp5588_gpio_direction_input(struct gpio_chip *chip, unsigned off)
105 {
106         struct adp5588_kpad *kpad = container_of(chip, struct adp5588_kpad, gc);
107         unsigned int bank = ADP5588_BANK(kpad->gpiomap[off]);
108         unsigned int bit = ADP5588_BIT(kpad->gpiomap[off]);
109         int ret;
110
111         mutex_lock(&kpad->gpio_lock);
112
113         kpad->dir[bank] &= ~bit;
114         ret = adp5588_write(kpad->client, GPIO_DIR1 + bank, kpad->dir[bank]);
115
116         mutex_unlock(&kpad->gpio_lock);
117
118         return ret;
119 }
120
121 static int adp5588_gpio_direction_output(struct gpio_chip *chip,
122                                          unsigned off, int val)
123 {
124         struct adp5588_kpad *kpad = container_of(chip, struct adp5588_kpad, gc);
125         unsigned int bank = ADP5588_BANK(kpad->gpiomap[off]);
126         unsigned int bit = ADP5588_BIT(kpad->gpiomap[off]);
127         int ret;
128
129         mutex_lock(&kpad->gpio_lock);
130
131         kpad->dir[bank] |= bit;
132
133         if (val)
134                 kpad->dat_out[bank] |= bit;
135         else
136                 kpad->dat_out[bank] &= ~bit;
137
138         ret = adp5588_write(kpad->client, GPIO_DAT_OUT1 + bank,
139                                  kpad->dat_out[bank]);
140         ret |= adp5588_write(kpad->client, GPIO_DIR1 + bank,
141                                  kpad->dir[bank]);
142
143         mutex_unlock(&kpad->gpio_lock);
144
145         return ret;
146 }
147
148 static int __devinit adp5588_build_gpiomap(struct adp5588_kpad *kpad,
149                                 const struct adp5588_kpad_platform_data *pdata)
150 {
151         bool pin_used[ADP5588_MAXGPIO];
152         int n_unused = 0;
153         int i;
154
155         memset(pin_used, 0, sizeof(pin_used));
156
157         for (i = 0; i < pdata->rows; i++)
158                 pin_used[i] = true;
159
160         for (i = 0; i < pdata->cols; i++)
161                 pin_used[i + GPI_PIN_COL_BASE - GPI_PIN_BASE] = true;
162
163         for (i = 0; i < kpad->gpimapsize; i++)
164                 pin_used[kpad->gpimap[i].pin - GPI_PIN_BASE] = true;
165
166         for (i = 0; i < ADP5588_MAXGPIO; i++)
167                 if (!pin_used[i])
168                         kpad->gpiomap[n_unused++] = i;
169
170         return n_unused;
171 }
172
173 static int __devinit adp5588_gpio_add(struct adp5588_kpad *kpad)
174 {
175         struct device *dev = &kpad->client->dev;
176         const struct adp5588_kpad_platform_data *pdata = dev->platform_data;
177         const struct adp5588_gpio_platform_data *gpio_data = pdata->gpio_data;
178         int i, error;
179
180         if (!gpio_data)
181                 return 0;
182
183         kpad->gc.ngpio = adp5588_build_gpiomap(kpad, pdata);
184         if (kpad->gc.ngpio == 0) {
185                 dev_info(dev, "No unused gpios left to export\n");
186                 return 0;
187         }
188
189         kpad->export_gpio = true;
190
191         kpad->gc.direction_input = adp5588_gpio_direction_input;
192         kpad->gc.direction_output = adp5588_gpio_direction_output;
193         kpad->gc.get = adp5588_gpio_get_value;
194         kpad->gc.set = adp5588_gpio_set_value;
195         kpad->gc.can_sleep = 1;
196
197         kpad->gc.base = gpio_data->gpio_start;
198         kpad->gc.label = kpad->client->name;
199         kpad->gc.owner = THIS_MODULE;
200
201         mutex_init(&kpad->gpio_lock);
202
203         error = gpiochip_add(&kpad->gc);
204         if (error) {
205                 dev_err(dev, "gpiochip_add failed, err: %d\n", error);
206                 return error;
207         }
208
209         for (i = 0; i <= ADP5588_BANK(ADP5588_MAXGPIO); i++) {
210                 kpad->dat_out[i] = adp5588_read(kpad->client,
211                                                 GPIO_DAT_OUT1 + i);
212                 kpad->dir[i] = adp5588_read(kpad->client, GPIO_DIR1 + i);
213         }
214
215         if (gpio_data->setup) {
216                 error = gpio_data->setup(kpad->client,
217                                          kpad->gc.base, kpad->gc.ngpio,
218                                          gpio_data->context);
219                 if (error)
220                         dev_warn(dev, "setup failed, %d\n", error);
221         }
222
223         return 0;
224 }
225
226 static void __devexit adp5588_gpio_remove(struct adp5588_kpad *kpad)
227 {
228         struct device *dev = &kpad->client->dev;
229         const struct adp5588_kpad_platform_data *pdata = dev->platform_data;
230         const struct adp5588_gpio_platform_data *gpio_data = pdata->gpio_data;
231         int error;
232
233         if (!kpad->export_gpio)
234                 return;
235
236         if (gpio_data->teardown) {
237                 error = gpio_data->teardown(kpad->client,
238                                             kpad->gc.base, kpad->gc.ngpio,
239                                             gpio_data->context);
240                 if (error)
241                         dev_warn(dev, "teardown failed %d\n", error);
242         }
243
244         error = gpiochip_remove(&kpad->gc);
245         if (error)
246                 dev_warn(dev, "gpiochip_remove failed %d\n", error);
247 }
248 #else
249 static inline int adp5588_gpio_add(struct adp5588_kpad *kpad)
250 {
251         return 0;
252 }
253
254 static inline void adp5588_gpio_remove(struct adp5588_kpad *kpad)
255 {
256 }
257 #endif
258
259 static void adp5588_report_events(struct adp5588_kpad *kpad, int ev_cnt)
260 {
261         int i, j;
262
263         for (i = 0; i < ev_cnt; i++) {
264                 int key = adp5588_read(kpad->client, Key_EVENTA + i);
265                 int key_val = key & KEY_EV_MASK;
266
267                 if (key_val >= GPI_PIN_BASE && key_val <= GPI_PIN_END) {
268                         for (j = 0; j < kpad->gpimapsize; j++) {
269                                 if (key_val == kpad->gpimap[j].pin) {
270                                         input_report_switch(kpad->input,
271                                                         kpad->gpimap[j].sw_evt,
272                                                         key & KEY_EV_PRESSED);
273                                         break;
274                                 }
275                         }
276                 } else {
277                         input_report_key(kpad->input,
278                                          kpad->keycode[key_val - 1],
279                                          key & KEY_EV_PRESSED);
280                 }
281         }
282 }
283
284 static void adp5588_work(struct work_struct *work)
285 {
286         struct adp5588_kpad *kpad = container_of(work,
287                                                 struct adp5588_kpad, work.work);
288         struct i2c_client *client = kpad->client;
289         int status, ev_cnt;
290
291         status = adp5588_read(client, INT_STAT);
292
293         if (status & ADP5588_OVR_FLOW_INT)      /* Unlikely and should never happen */
294                 dev_err(&client->dev, "Event Overflow Error\n");
295
296         if (status & ADP5588_KE_INT) {
297                 ev_cnt = adp5588_read(client, KEY_LCK_EC_STAT) & ADP5588_KEC;
298                 if (ev_cnt) {
299                         adp5588_report_events(kpad, ev_cnt);
300                         input_sync(kpad->input);
301                 }
302         }
303         adp5588_write(client, INT_STAT, status); /* Status is W1C */
304 }
305
306 static irqreturn_t adp5588_irq(int irq, void *handle)
307 {
308         struct adp5588_kpad *kpad = handle;
309
310         /*
311          * use keventd context to read the event fifo registers
312          * Schedule readout at least 25ms after notification for
313          * REVID < 4
314          */
315
316         schedule_delayed_work(&kpad->work, kpad->delay);
317
318         return IRQ_HANDLED;
319 }
320
321 static int __devinit adp5588_setup(struct i2c_client *client)
322 {
323         const struct adp5588_kpad_platform_data *pdata = client->dev.platform_data;
324         const struct adp5588_gpio_platform_data *gpio_data = pdata->gpio_data;
325         int i, ret;
326         unsigned char evt_mode1 = 0, evt_mode2 = 0, evt_mode3 = 0;
327
328         ret = adp5588_write(client, KP_GPIO1, KP_SEL(pdata->rows));
329         ret |= adp5588_write(client, KP_GPIO2, KP_SEL(pdata->cols) & 0xFF);
330         ret |= adp5588_write(client, KP_GPIO3, KP_SEL(pdata->cols) >> 8);
331
332         if (pdata->en_keylock) {
333                 ret |= adp5588_write(client, UNLOCK1, pdata->unlock_key1);
334                 ret |= adp5588_write(client, UNLOCK2, pdata->unlock_key2);
335                 ret |= adp5588_write(client, KEY_LCK_EC_STAT, ADP5588_K_LCK_EN);
336         }
337
338         for (i = 0; i < KEYP_MAX_EVENT; i++)
339                 ret |= adp5588_read(client, Key_EVENTA);
340
341         for (i = 0; i < pdata->gpimapsize; i++) {
342                 unsigned short pin = pdata->gpimap[i].pin;
343
344                 if (pin <= GPI_PIN_ROW_END) {
345                         evt_mode1 |= (1 << (pin - GPI_PIN_ROW_BASE));
346                 } else {
347                         evt_mode2 |= ((1 << (pin - GPI_PIN_COL_BASE)) & 0xFF);
348                         evt_mode3 |= ((1 << (pin - GPI_PIN_COL_BASE)) >> 8);
349                 }
350         }
351
352         if (pdata->gpimapsize) {
353                 ret |= adp5588_write(client, GPI_EM1, evt_mode1);
354                 ret |= adp5588_write(client, GPI_EM2, evt_mode2);
355                 ret |= adp5588_write(client, GPI_EM3, evt_mode3);
356         }
357
358         if (gpio_data) {
359                 for (i = 0; i <= ADP5588_BANK(ADP5588_MAXGPIO); i++) {
360                         int pull_mask = gpio_data->pullup_dis_mask;
361
362                         ret |= adp5588_write(client, GPIO_PULL1 + i,
363                                 (pull_mask >> (8 * i)) & 0xFF);
364                 }
365         }
366
367         ret |= adp5588_write(client, INT_STAT,
368                                 ADP5588_CMP2_INT | ADP5588_CMP1_INT |
369                                 ADP5588_OVR_FLOW_INT | ADP5588_K_LCK_INT |
370                                 ADP5588_GPI_INT | ADP5588_KE_INT); /* Status is W1C */
371
372         ret |= adp5588_write(client, CFG, ADP5588_INT_CFG |
373                                           ADP5588_OVR_FLOW_IEN |
374                                           ADP5588_KE_IEN);
375
376         if (ret < 0) {
377                 dev_err(&client->dev, "Write Error\n");
378                 return ret;
379         }
380
381         return 0;
382 }
383
384 static void __devinit adp5588_report_switch_state(struct adp5588_kpad *kpad)
385 {
386         int gpi_stat1 = adp5588_read(kpad->client, GPIO_DAT_STAT1);
387         int gpi_stat2 = adp5588_read(kpad->client, GPIO_DAT_STAT2);
388         int gpi_stat3 = adp5588_read(kpad->client, GPIO_DAT_STAT3);
389         int gpi_stat_tmp, pin_loc;
390         int i;
391
392         for (i = 0; i < kpad->gpimapsize; i++) {
393                 unsigned short pin = kpad->gpimap[i].pin;
394
395                 if (pin <= GPI_PIN_ROW_END) {
396                         gpi_stat_tmp = gpi_stat1;
397                         pin_loc = pin - GPI_PIN_ROW_BASE;
398                 } else if ((pin - GPI_PIN_COL_BASE) < 8) {
399                         gpi_stat_tmp = gpi_stat2;
400                         pin_loc = pin - GPI_PIN_COL_BASE;
401                 } else {
402                         gpi_stat_tmp = gpi_stat3;
403                         pin_loc = pin - GPI_PIN_COL_BASE - 8;
404                 }
405
406                 if (gpi_stat_tmp < 0) {
407                         dev_err(&kpad->client->dev,
408                                 "Can't read GPIO_DAT_STAT switch %d default to OFF\n",
409                                 pin);
410                         gpi_stat_tmp = 0;
411                 }
412
413                 input_report_switch(kpad->input,
414                                     kpad->gpimap[i].sw_evt,
415                                     !(gpi_stat_tmp & (1 << pin_loc)));
416         }
417
418         input_sync(kpad->input);
419 }
420
421
422 static int __devinit adp5588_probe(struct i2c_client *client,
423                                         const struct i2c_device_id *id)
424 {
425         struct adp5588_kpad *kpad;
426         const struct adp5588_kpad_platform_data *pdata = client->dev.platform_data;
427         struct input_dev *input;
428         unsigned int revid;
429         int ret, i;
430         int error;
431
432         if (!i2c_check_functionality(client->adapter,
433                                         I2C_FUNC_SMBUS_BYTE_DATA)) {
434                 dev_err(&client->dev, "SMBUS Byte Data not Supported\n");
435                 return -EIO;
436         }
437
438         if (!pdata) {
439                 dev_err(&client->dev, "no platform data?\n");
440                 return -EINVAL;
441         }
442
443         if (!pdata->rows || !pdata->cols || !pdata->keymap) {
444                 dev_err(&client->dev, "no rows, cols or keymap from pdata\n");
445                 return -EINVAL;
446         }
447
448         if (pdata->keymapsize != ADP5588_KEYMAPSIZE) {
449                 dev_err(&client->dev, "invalid keymapsize\n");
450                 return -EINVAL;
451         }
452
453         if (!pdata->gpimap && pdata->gpimapsize) {
454                 dev_err(&client->dev, "invalid gpimap from pdata\n");
455                 return -EINVAL;
456         }
457
458         if (pdata->gpimapsize > ADP5588_GPIMAPSIZE_MAX) {
459                 dev_err(&client->dev, "invalid gpimapsize\n");
460                 return -EINVAL;
461         }
462
463         for (i = 0; i < pdata->gpimapsize; i++) {
464                 unsigned short pin = pdata->gpimap[i].pin;
465
466                 if (pin < GPI_PIN_BASE || pin > GPI_PIN_END) {
467                         dev_err(&client->dev, "invalid gpi pin data\n");
468                         return -EINVAL;
469                 }
470
471                 if (pin <= GPI_PIN_ROW_END) {
472                         if (pin - GPI_PIN_ROW_BASE + 1 <= pdata->rows) {
473                                 dev_err(&client->dev, "invalid gpi row data\n");
474                                 return -EINVAL;
475                         }
476                 } else {
477                         if (pin - GPI_PIN_COL_BASE + 1 <= pdata->cols) {
478                                 dev_err(&client->dev, "invalid gpi col data\n");
479                                 return -EINVAL;
480                         }
481                 }
482         }
483
484         if (!client->irq) {
485                 dev_err(&client->dev, "no IRQ?\n");
486                 return -EINVAL;
487         }
488
489         kpad = kzalloc(sizeof(*kpad), GFP_KERNEL);
490         input = input_allocate_device();
491         if (!kpad || !input) {
492                 error = -ENOMEM;
493                 goto err_free_mem;
494         }
495
496         kpad->client = client;
497         kpad->input = input;
498         INIT_DELAYED_WORK(&kpad->work, adp5588_work);
499
500         ret = adp5588_read(client, DEV_ID);
501         if (ret < 0) {
502                 error = ret;
503                 goto err_free_mem;
504         }
505
506         revid = (u8) ret & ADP5588_DEVICE_ID_MASK;
507         if (WA_DELAYED_READOUT_REVID(revid))
508                 kpad->delay = msecs_to_jiffies(30);
509
510         input->name = client->name;
511         input->phys = "adp5588-keys/input0";
512         input->dev.parent = &client->dev;
513
514         input_set_drvdata(input, kpad);
515
516         input->id.bustype = BUS_I2C;
517         input->id.vendor = 0x0001;
518         input->id.product = 0x0001;
519         input->id.version = revid;
520
521         input->keycodesize = sizeof(kpad->keycode[0]);
522         input->keycodemax = pdata->keymapsize;
523         input->keycode = kpad->keycode;
524
525         memcpy(kpad->keycode, pdata->keymap,
526                 pdata->keymapsize * input->keycodesize);
527
528         kpad->gpimap = pdata->gpimap;
529         kpad->gpimapsize = pdata->gpimapsize;
530
531         /* setup input device */
532         __set_bit(EV_KEY, input->evbit);
533
534         if (pdata->repeat)
535                 __set_bit(EV_REP, input->evbit);
536
537         for (i = 0; i < input->keycodemax; i++)
538                 __set_bit(kpad->keycode[i] & KEY_MAX, input->keybit);
539         __clear_bit(KEY_RESERVED, input->keybit);
540
541         if (kpad->gpimapsize)
542                 __set_bit(EV_SW, input->evbit);
543         for (i = 0; i < kpad->gpimapsize; i++)
544                 __set_bit(kpad->gpimap[i].sw_evt, input->swbit);
545
546         error = input_register_device(input);
547         if (error) {
548                 dev_err(&client->dev, "unable to register input device\n");
549                 goto err_free_mem;
550         }
551
552         error = request_irq(client->irq, adp5588_irq,
553                             IRQF_TRIGGER_FALLING | IRQF_DISABLED,
554                             client->dev.driver->name, kpad);
555         if (error) {
556                 dev_err(&client->dev, "irq %d busy?\n", client->irq);
557                 goto err_unreg_dev;
558         }
559
560         error = adp5588_setup(client);
561         if (error)
562                 goto err_free_irq;
563
564         if (kpad->gpimapsize)
565                 adp5588_report_switch_state(kpad);
566
567         error = adp5588_gpio_add(kpad);
568         if (error)
569                 goto err_free_irq;
570
571         device_init_wakeup(&client->dev, 1);
572         i2c_set_clientdata(client, kpad);
573
574         dev_info(&client->dev, "Rev.%d keypad, irq %d\n", revid, client->irq);
575         return 0;
576
577  err_free_irq:
578         free_irq(client->irq, kpad);
579  err_unreg_dev:
580         input_unregister_device(input);
581         input = NULL;
582  err_free_mem:
583         input_free_device(input);
584         kfree(kpad);
585
586         return error;
587 }
588
589 static int __devexit adp5588_remove(struct i2c_client *client)
590 {
591         struct adp5588_kpad *kpad = i2c_get_clientdata(client);
592
593         adp5588_write(client, CFG, 0);
594         free_irq(client->irq, kpad);
595         cancel_delayed_work_sync(&kpad->work);
596         input_unregister_device(kpad->input);
597         adp5588_gpio_remove(kpad);
598         kfree(kpad);
599
600         return 0;
601 }
602
603 #ifdef CONFIG_PM
604 static int adp5588_suspend(struct device *dev)
605 {
606         struct adp5588_kpad *kpad = dev_get_drvdata(dev);
607         struct i2c_client *client = kpad->client;
608
609         disable_irq(client->irq);
610         cancel_delayed_work_sync(&kpad->work);
611
612         if (device_may_wakeup(&client->dev))
613                 enable_irq_wake(client->irq);
614
615         return 0;
616 }
617
618 static int adp5588_resume(struct device *dev)
619 {
620         struct adp5588_kpad *kpad = dev_get_drvdata(dev);
621         struct i2c_client *client = kpad->client;
622
623         if (device_may_wakeup(&client->dev))
624                 disable_irq_wake(client->irq);
625
626         enable_irq(client->irq);
627
628         return 0;
629 }
630
631 static const struct dev_pm_ops adp5588_dev_pm_ops = {
632         .suspend = adp5588_suspend,
633         .resume  = adp5588_resume,
634 };
635 #endif
636
637 static const struct i2c_device_id adp5588_id[] = {
638         { "adp5588-keys", 0 },
639         { "adp5587-keys", 0 },
640         { }
641 };
642 MODULE_DEVICE_TABLE(i2c, adp5588_id);
643
644 static struct i2c_driver adp5588_driver = {
645         .driver = {
646                 .name = KBUILD_MODNAME,
647 #ifdef CONFIG_PM
648                 .pm   = &adp5588_dev_pm_ops,
649 #endif
650         },
651         .probe    = adp5588_probe,
652         .remove   = __devexit_p(adp5588_remove),
653         .id_table = adp5588_id,
654 };
655
656 static int __init adp5588_init(void)
657 {
658         return i2c_add_driver(&adp5588_driver);
659 }
660 module_init(adp5588_init);
661
662 static void __exit adp5588_exit(void)
663 {
664         i2c_del_driver(&adp5588_driver);
665 }
666 module_exit(adp5588_exit);
667
668 MODULE_LICENSE("GPL");
669 MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
670 MODULE_DESCRIPTION("ADP5588/87 Keypad driver");