IB/qib: Correct nfreectxts for multiple HCAs
[pandora-kernel.git] / drivers / infiniband / hw / qib / qib_qsfp.h
1 /*
2  * Copyright (c) 2006, 2007, 2008, 2009 QLogic Corporation. All rights reserved.
3  * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
4  *
5  * This software is available to you under a choice of one of two
6  * licenses.  You may choose to be licensed under the terms of the GNU
7  * General Public License (GPL) Version 2, available from the file
8  * COPYING in the main directory of this source tree, or the
9  * OpenIB.org BSD license below:
10  *
11  *     Redistribution and use in source and binary forms, with or
12  *     without modification, are permitted provided that the following
13  *     conditions are met:
14  *
15  *      - Redistributions of source code must retain the above
16  *        copyright notice, this list of conditions and the following
17  *        disclaimer.
18  *
19  *      - Redistributions in binary form must reproduce the above
20  *        copyright notice, this list of conditions and the following
21  *        disclaimer in the documentation and/or other materials
22  *        provided with the distribution.
23  *
24  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
25  * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
26  * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
27  * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
28  * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
29  * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
30  * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
31  * SOFTWARE.
32  */
33 /* QSFP support common definitions, for ib_qib driver */
34
35 #define QSFP_DEV 0xA0
36 #define QSFP_PWR_LAG_MSEC 2000
37
38 /*
39  * Below are masks for various QSFP signals, for Port 1.
40  * Port2 equivalents are shifted by QSFP_GPIO_PORT2_SHIFT.
41  * _N means asserted low
42  */
43 #define QSFP_GPIO_MOD_SEL_N (4)
44 #define QSFP_GPIO_MOD_PRS_N (8)
45 #define QSFP_GPIO_INT_N (0x10)
46 #define QSFP_GPIO_MOD_RST_N (0x20)
47 #define QSFP_GPIO_LP_MODE (0x40)
48 #define QSFP_GPIO_PORT2_SHIFT 5
49
50 #define QSFP_PAGESIZE 128
51 /* Defined fields that QLogic requires of qualified cables */
52 /* Byte 0 is Identifier, not checked */
53 /* Byte 1 is reserved "status MSB" */
54 /* Byte 2 is "status LSB" We only care that D2 "Flat Mem" is set. */
55 /*
56  * Rest of first 128 not used, although 127 is reserved for page select
57  * if module is not "Flat memory".
58  */
59 /* Byte 128 is Identifier: must be 0x0c for QSFP, or 0x0d for QSFP+ */
60 #define QSFP_MOD_ID_OFFS 128
61 /*
62  * Byte 129 is "Extended Identifier". We only care about D7,D6: Power class
63  *  0:1.5W, 1:2.0W, 2:2.5W, 3:3.5W
64  */
65 #define QSFP_MOD_PWR_OFFS 129
66 /* Byte 130 is Connector type. Not QLogic req'd */
67 /* Bytes 131..138 are Transceiver types, bit maps for various tech, none IB */
68 /* Byte 139 is encoding. code 0x01 is 8b10b. Not QLogic req'd */
69 /* byte 140 is nominal bit-rate, in units of 100Mbits/sec Not QLogic req'd */
70 /* Byte 141 is Extended Rate Select. Not QLogic req'd */
71 /* Bytes 142..145 are lengths for various fiber types. Not QLogic req'd */
72 /* Byte 146 is length for Copper. Units of 1 meter */
73 #define QSFP_MOD_LEN_OFFS 146
74 /*
75  * Byte 147 is Device technology. D0..3 not Qlogc req'd
76  * D4..7 select from 15 choices, translated by table:
77  */
78 #define QSFP_MOD_TECH_OFFS 147
79 extern const char *const qib_qsfp_devtech[16];
80 /* Active Equalization includes fiber, copper full EQ, and copper near Eq */
81 #define QSFP_IS_ACTIVE(tech) ((0xA2FF >> ((tech) >> 4)) & 1)
82 /* Active Equalization includes fiber, copper full EQ, and copper far Eq */
83 #define QSFP_IS_ACTIVE_FAR(tech) ((0x32FF >> ((tech) >> 4)) & 1)
84 /* Attenuation should be valid for copper other than full/near Eq */
85 #define QSFP_HAS_ATTEN(tech) ((0x4D00 >> ((tech) >> 4)) & 1)
86 /* Length is only valid if technology is "copper" */
87 #define QSFP_IS_CU(tech) ((0xED00 >> ((tech) >> 4)) & 1)
88 #define QSFP_TECH_1490 9
89
90 #define QSFP_OUI(oui) (((unsigned)oui[0] << 16) | ((unsigned)oui[1] << 8) | \
91                         oui[2])
92 #define QSFP_OUI_AMPHENOL 0x415048
93 #define QSFP_OUI_FINISAR  0x009065
94 #define QSFP_OUI_GORE     0x002177
95
96 /* Bytes 148..163 are Vendor Name, Left-justified Blank-filled */
97 #define QSFP_VEND_OFFS 148
98 #define QSFP_VEND_LEN 16
99 /* Byte 164 is IB Extended tranceiver codes Bits D0..3 are SDR,DDR,QDR,EDR */
100 #define QSFP_IBXCV_OFFS 164
101 /* Bytes 165..167 are Vendor OUI number */
102 #define QSFP_VOUI_OFFS 165
103 #define QSFP_VOUI_LEN 3
104 /* Bytes 168..183 are Vendor Part Number, string */
105 #define QSFP_PN_OFFS 168
106 #define QSFP_PN_LEN 16
107 /* Bytes 184,185 are Vendor Rev. Left Justified, Blank-filled */
108 #define QSFP_REV_OFFS 184
109 #define QSFP_REV_LEN 2
110 /*
111  * Bytes 186,187 are Wavelength, if Optical. Not Qlogic req'd
112  *  If copper, they are attenuation in dB:
113  * Byte 186 is at 2.5Gb/sec (SDR), Byte 187 at 5.0Gb/sec (DDR)
114  */
115 #define QSFP_ATTEN_OFFS 186
116 #define QSFP_ATTEN_LEN 2
117 /* Bytes 188,189 are Wavelength tolerance, not QLogic req'd */
118 /* Byte 190 is Max Case Temp. Not QLogic req'd */
119 /* Byte 191 is LSB of sum of bytes 128..190. Not QLogic req'd */
120 #define QSFP_CC_OFFS 191
121 /* Bytes 192..195 are Options implemented in qsfp. Not Qlogic req'd */
122 /* Bytes 196..211 are Serial Number, String */
123 #define QSFP_SN_OFFS 196
124 #define QSFP_SN_LEN 16
125 /* Bytes 212..219 are date-code YYMMDD (MM==1 for Jan) */
126 #define QSFP_DATE_OFFS 212
127 #define QSFP_DATE_LEN 6
128 /* Bytes 218,219 are optional lot-code, string */
129 #define QSFP_LOT_OFFS 218
130 #define QSFP_LOT_LEN 2
131 /* Bytes 220, 221 indicate monitoring options, Not QLogic req'd */
132 /* Byte 223 is LSB of sum of bytes 192..222 */
133 #define QSFP_CC_EXT_OFFS 223
134
135 /*
136  * struct qib_qsfp_data encapsulates state of QSFP device for one port.
137  * it will be part of port-chip-specific data if a board supports QSFP.
138  *
139  * Since multiple board-types use QSFP, and their pport_data structs
140  * differ (in the chip-specific section), we need a pointer to its head.
141  *
142  * Avoiding premature optimization, we will have one work_struct per port,
143  * and let the (increasingly inaccurately named) eep_lock arbitrate
144  * access to common resources.
145  *
146  */
147
148 /*
149  * Hold the parts of the onboard EEPROM that we care about, so we aren't
150  * coonstantly bit-boffing
151  */
152 struct qib_qsfp_cache {
153         u8 id;  /* must be 0x0C or 0x0D; 0 indicates invalid EEPROM read */
154         u8 pwr; /* in D6,7 */
155         u8 len; /* in meters, Cu only */
156         u8 tech;
157         char vendor[QSFP_VEND_LEN];
158         u8 xt_xcv; /* Ext. tranceiver codes, 4 lsbs are IB speed supported */
159         u8 oui[QSFP_VOUI_LEN];
160         u8 partnum[QSFP_PN_LEN];
161         u8 rev[QSFP_REV_LEN];
162         u8 atten[QSFP_ATTEN_LEN];
163         u8 cks1;        /* Checksum of bytes 128..190 */
164         u8 serial[QSFP_SN_LEN];
165         u8 date[QSFP_DATE_LEN];
166         u8 lot[QSFP_LOT_LEN];
167         u8 cks2;        /* Checsum of bytes 192..222 */
168 };
169
170 #define QSFP_PWR(pbyte) (((pbyte) >> 6) & 3)
171 #define QSFP_ATTEN_SDR(attenarray) (attenarray[0])
172 #define QSFP_ATTEN_DDR(attenarray) (attenarray[1])
173
174 struct qib_qsfp_data {
175         /* Helps to find our way */
176         struct qib_pportdata *ppd;
177         struct work_struct work;
178         struct qib_qsfp_cache cache;
179         u64 t_insert;
180 };
181
182 extern int qib_refresh_qsfp_cache(struct qib_pportdata *ppd,
183                                   struct qib_qsfp_cache *cp);
184 extern void qib_qsfp_init(struct qib_qsfp_data *qd,
185                           void (*fevent)(struct work_struct *));
186 extern void qib_qsfp_deinit(struct qib_qsfp_data *qd);