2 * Copyright (c) 2006, 2007, 2008, 2009, 2010 QLogic Corporation.
4 * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
6 * This software is available to you under a choice of one of two
7 * licenses. You may choose to be licensed under the terms of the GNU
8 * General Public License (GPL) Version 2, available from the file
9 * COPYING in the main directory of this source tree, or the
10 * OpenIB.org BSD license below:
12 * Redistribution and use in source and binary forms, with or
13 * without modification, are permitted provided that the following
16 * - Redistributions of source code must retain the above
17 * copyright notice, this list of conditions and the following
20 * - Redistributions in binary form must reproduce the above
21 * copyright notice, this list of conditions and the following
22 * disclaimer in the documentation and/or other materials
23 * provided with the distribution.
25 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
26 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
27 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
28 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
29 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
30 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
31 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
35 #include <linux/pci.h>
36 #include <linux/netdevice.h>
37 #include <linux/vmalloc.h>
38 #include <linux/delay.h>
39 #include <linux/idr.h>
40 #include <linux/module.h>
43 #include "qib_common.h"
46 * min buffers we want to have per context, after driver
48 #define QIB_MIN_USER_CTXT_BUFCNT 7
50 #define QLOGIC_IB_R_SOFTWARE_MASK 0xFF
51 #define QLOGIC_IB_R_SOFTWARE_SHIFT 24
52 #define QLOGIC_IB_R_EMULATOR_MASK (1ULL<<62)
55 * Number of ctxts we are configured to use (to allow for more pio
56 * buffers per ctxt, etc.) Zero means use chip value.
59 module_param_named(cfgctxts, qib_cfgctxts, ushort, S_IRUGO);
60 MODULE_PARM_DESC(cfgctxts, "Set max number of contexts to use");
63 * If set, do not write to any regs if avoidable, hack to allow
64 * check for deranged default register values.
67 module_param_named(mini_init, qib_mini_init, ushort, S_IRUGO);
68 MODULE_PARM_DESC(mini_init, "If set, do minimal diag init");
70 unsigned qib_n_krcv_queues;
71 module_param_named(krcvqs, qib_n_krcv_queues, uint, S_IRUGO);
72 MODULE_PARM_DESC(krcvqs, "number of kernel receive queues per IB port");
75 * qib_wc_pat parameter:
78 * If PAT initialization fails, code reverts back to MTRR
80 unsigned qib_wc_pat = 1; /* default (1) is to use PAT, not MTRR */
81 module_param_named(wc_pat, qib_wc_pat, uint, S_IRUGO);
82 MODULE_PARM_DESC(wc_pat, "enable write-combining via PAT mechanism");
84 struct workqueue_struct *qib_cq_wq;
86 static void verify_interrupt(unsigned long);
88 static struct idr qib_unit_table;
89 u32 qib_cpulist_count;
90 unsigned long *qib_cpulist;
92 /* set number of contexts we'll actually use */
93 void qib_set_ctxtcnt(struct qib_devdata *dd)
96 dd->cfgctxts = dd->first_user_ctxt + num_online_cpus();
97 if (dd->cfgctxts > dd->ctxtcnt)
98 dd->cfgctxts = dd->ctxtcnt;
99 } else if (qib_cfgctxts < dd->num_pports)
100 dd->cfgctxts = dd->ctxtcnt;
101 else if (qib_cfgctxts <= dd->ctxtcnt)
102 dd->cfgctxts = qib_cfgctxts;
104 dd->cfgctxts = dd->ctxtcnt;
108 * Common code for creating the receive context array.
110 int qib_create_ctxts(struct qib_devdata *dd)
116 * Allocate full ctxtcnt array, rather than just cfgctxts, because
117 * cleanup iterates across all possible ctxts.
119 dd->rcd = kzalloc(sizeof(*dd->rcd) * dd->ctxtcnt, GFP_KERNEL);
121 qib_dev_err(dd, "Unable to allocate ctxtdata array, "
127 /* create (one or more) kctxt */
128 for (i = 0; i < dd->first_user_ctxt; ++i) {
129 struct qib_pportdata *ppd;
130 struct qib_ctxtdata *rcd;
132 if (dd->skip_kctxt_mask & (1 << i))
135 ppd = dd->pport + (i % dd->num_pports);
136 rcd = qib_create_ctxtdata(ppd, i);
138 qib_dev_err(dd, "Unable to allocate ctxtdata"
139 " for Kernel ctxt, failing\n");
143 rcd->pkeys[0] = QIB_DEFAULT_P_KEY;
152 * Common code for user and kernel context setup.
154 struct qib_ctxtdata *qib_create_ctxtdata(struct qib_pportdata *ppd, u32 ctxt)
156 struct qib_devdata *dd = ppd->dd;
157 struct qib_ctxtdata *rcd;
159 rcd = kzalloc(sizeof(*rcd), GFP_KERNEL);
161 INIT_LIST_HEAD(&rcd->qp_wait_list);
168 dd->f_init_ctxt(rcd);
171 * To avoid wasting a lot of memory, we allocate 32KB chunks
172 * of physically contiguous memory, advance through it until
173 * used up and then allocate more. Of course, we need
174 * memory to store those extra pointers, now. 32KB seems to
175 * be the most that is "safe" under memory pressure
176 * (creating large files and then copying them over
177 * NFS while doing lots of MPI jobs). The OOM killer can
178 * get invoked, even though we say we can sleep and this can
179 * cause significant system problems....
181 rcd->rcvegrbuf_size = 0x8000;
182 rcd->rcvegrbufs_perchunk =
183 rcd->rcvegrbuf_size / dd->rcvegrbufsize;
184 rcd->rcvegrbuf_chunks = (rcd->rcvegrcnt +
185 rcd->rcvegrbufs_perchunk - 1) /
186 rcd->rcvegrbufs_perchunk;
187 BUG_ON(!is_power_of_2(rcd->rcvegrbufs_perchunk));
188 rcd->rcvegrbufs_perchunk_shift =
189 ilog2(rcd->rcvegrbufs_perchunk);
195 * Common code for initializing the physical port structure.
197 void qib_init_pportdata(struct qib_pportdata *ppd, struct qib_devdata *dd,
201 ppd->hw_pidx = hw_pidx;
202 ppd->port = port; /* IB port number, not index */
204 spin_lock_init(&ppd->sdma_lock);
205 spin_lock_init(&ppd->lflags_lock);
206 init_waitqueue_head(&ppd->state_wait);
208 init_timer(&ppd->symerr_clear_timer);
209 ppd->symerr_clear_timer.function = qib_clear_symerror_on_linkup;
210 ppd->symerr_clear_timer.data = (unsigned long)ppd;
213 static int init_pioavailregs(struct qib_devdata *dd)
218 dd->pioavailregs_dma = dma_alloc_coherent(
219 &dd->pcidev->dev, PAGE_SIZE, &dd->pioavailregs_phys,
221 if (!dd->pioavailregs_dma) {
222 qib_dev_err(dd, "failed to allocate PIOavail reg area "
229 * We really want L2 cache aligned, but for current CPUs of
230 * interest, they are the same.
232 status_page = (u64 *)
233 ((char *) dd->pioavailregs_dma +
234 ((2 * L1_CACHE_BYTES +
235 dd->pioavregs * sizeof(u64)) & ~L1_CACHE_BYTES));
236 /* device status comes first, for backwards compatibility */
237 dd->devstatusp = status_page;
239 for (pidx = 0; pidx < dd->num_pports; ++pidx) {
240 dd->pport[pidx].statusp = status_page;
245 * Setup buffer to hold freeze and other messages, accessible to
246 * apps, following statusp. This is per-unit, not per port.
248 dd->freezemsg = (char *) status_page;
250 /* length of msg buffer is "whatever is left" */
251 ret = (char *) status_page - (char *) dd->pioavailregs_dma;
252 dd->freezelen = PAGE_SIZE - ret;
261 * init_shadow_tids - allocate the shadow TID array
262 * @dd: the qlogic_ib device
264 * allocate the shadow TID array, so we can qib_munlock previous
265 * entries. It may make more sense to move the pageshadow to the
266 * ctxt data structure, so we only allocate memory for ctxts actually
267 * in use, since we at 8k per ctxt, now.
268 * We don't want failures here to prevent use of the driver/chip,
269 * so no return value.
271 static void init_shadow_tids(struct qib_devdata *dd)
276 pages = vzalloc(dd->cfgctxts * dd->rcvtidcnt * sizeof(struct page *));
278 qib_dev_err(dd, "failed to allocate shadow page * "
279 "array, no expected sends!\n");
283 addrs = vzalloc(dd->cfgctxts * dd->rcvtidcnt * sizeof(dma_addr_t));
285 qib_dev_err(dd, "failed to allocate shadow dma handle "
286 "array, no expected sends!\n");
290 dd->pageshadow = pages;
291 dd->physshadow = addrs;
297 dd->pageshadow = NULL;
301 * Do initialization for device that is only needed on
302 * first detect, not on resets.
304 static int loadtime_init(struct qib_devdata *dd)
308 if (((dd->revision >> QLOGIC_IB_R_SOFTWARE_SHIFT) &
309 QLOGIC_IB_R_SOFTWARE_MASK) != QIB_CHIP_SWVERSION) {
310 qib_dev_err(dd, "Driver only handles version %d, "
311 "chip swversion is %d (%llx), failng\n",
313 (int)(dd->revision >>
314 QLOGIC_IB_R_SOFTWARE_SHIFT) &
315 QLOGIC_IB_R_SOFTWARE_MASK,
316 (unsigned long long) dd->revision);
321 if (dd->revision & QLOGIC_IB_R_EMULATOR_MASK)
322 qib_devinfo(dd->pcidev, "%s", dd->boardversion);
324 spin_lock_init(&dd->pioavail_lock);
325 spin_lock_init(&dd->sendctrl_lock);
326 spin_lock_init(&dd->uctxt_lock);
327 spin_lock_init(&dd->qib_diag_trans_lock);
328 spin_lock_init(&dd->eep_st_lock);
329 mutex_init(&dd->eep_lock);
334 ret = init_pioavailregs(dd);
335 init_shadow_tids(dd);
337 qib_get_eeprom_info(dd);
339 /* setup time (don't start yet) to verify we got interrupt */
340 init_timer(&dd->intrchk_timer);
341 dd->intrchk_timer.function = verify_interrupt;
342 dd->intrchk_timer.data = (unsigned long) dd;
349 * init_after_reset - re-initialize after a reset
350 * @dd: the qlogic_ib device
352 * sanity check at least some of the values after reset, and
353 * ensure no receive or transmit (explicitly, in case reset
356 static int init_after_reset(struct qib_devdata *dd)
361 * Ensure chip does no sends or receives, tail updates, or
362 * pioavail updates while we re-initialize. This is mostly
363 * for the driver data structures, not chip registers.
365 for (i = 0; i < dd->num_pports; ++i) {
367 * ctxt == -1 means "all contexts". Only really safe for
368 * _dis_abling things, as here.
370 dd->f_rcvctrl(dd->pport + i, QIB_RCVCTRL_CTXT_DIS |
371 QIB_RCVCTRL_INTRAVAIL_DIS |
372 QIB_RCVCTRL_TAILUPD_DIS, -1);
373 /* Redundant across ports for some, but no big deal. */
374 dd->f_sendctrl(dd->pport + i, QIB_SENDCTRL_SEND_DIS |
375 QIB_SENDCTRL_AVAIL_DIS);
381 static void enable_chip(struct qib_devdata *dd)
387 * Enable PIO send, and update of PIOavail regs to memory.
389 for (i = 0; i < dd->num_pports; ++i)
390 dd->f_sendctrl(dd->pport + i, QIB_SENDCTRL_SEND_ENB |
391 QIB_SENDCTRL_AVAIL_ENB);
393 * Enable kernel ctxts' receive and receive interrupt.
394 * Other ctxts done as user opens and inits them.
396 rcvmask = QIB_RCVCTRL_CTXT_ENB | QIB_RCVCTRL_INTRAVAIL_ENB;
397 rcvmask |= (dd->flags & QIB_NODMA_RTAIL) ?
398 QIB_RCVCTRL_TAILUPD_DIS : QIB_RCVCTRL_TAILUPD_ENB;
399 for (i = 0; dd->rcd && i < dd->first_user_ctxt; ++i) {
400 struct qib_ctxtdata *rcd = dd->rcd[i];
403 dd->f_rcvctrl(rcd->ppd, rcvmask, i);
405 dd->freectxts = dd->cfgctxts - dd->first_user_ctxt;
408 static void verify_interrupt(unsigned long opaque)
410 struct qib_devdata *dd = (struct qib_devdata *) opaque;
413 return; /* being torn down */
416 * If we don't have a lid or any interrupts, let the user know and
417 * don't bother checking again.
419 if (dd->int_counter == 0) {
420 if (!dd->f_intr_fallback(dd))
421 dev_err(&dd->pcidev->dev, "No interrupts detected, "
423 else /* re-arm the timer to see if fallback works */
424 mod_timer(&dd->intrchk_timer, jiffies + HZ/2);
428 static void init_piobuf_state(struct qib_devdata *dd)
434 * Ensure all buffers are free, and fifos empty. Buffers
435 * are common, so only do once for port 0.
437 * After enable and qib_chg_pioavailkernel so we can safely
438 * enable pioavail updates and PIOENABLE. After this, packets
439 * are ready and able to go out.
441 dd->f_sendctrl(dd->pport, QIB_SENDCTRL_DISARM_ALL);
442 for (pidx = 0; pidx < dd->num_pports; ++pidx)
443 dd->f_sendctrl(dd->pport + pidx, QIB_SENDCTRL_FLUSH);
446 * If not all sendbufs are used, add the one to each of the lower
447 * numbered contexts. pbufsctxt and lastctxt_piobuf are
448 * calculated in chip-specific code because it may cause some
449 * chip-specific adjustments to be made.
451 uctxts = dd->cfgctxts - dd->first_user_ctxt;
452 dd->ctxts_extrabuf = dd->pbufsctxt ?
453 dd->lastctxt_piobuf - (dd->pbufsctxt * uctxts) : 0;
456 * Set up the shadow copies of the piobufavail registers,
457 * which we compare against the chip registers for now, and
458 * the in memory DMA'ed copies of the registers.
459 * By now pioavail updates to memory should have occurred, so
460 * copy them into our working/shadow registers; this is in
461 * case something went wrong with abort, but mostly to get the
462 * initial values of the generation bit correct.
464 for (i = 0; i < dd->pioavregs; i++) {
467 tmp = dd->pioavailregs_dma[i];
469 * Don't need to worry about pioavailkernel here
470 * because we will call qib_chg_pioavailkernel() later
471 * in initialization, to busy out buffers as needed.
473 dd->pioavailshadow[i] = le64_to_cpu(tmp);
475 while (i < ARRAY_SIZE(dd->pioavailshadow))
476 dd->pioavailshadow[i++] = 0; /* for debugging sanity */
478 /* after pioavailshadow is setup */
479 qib_chg_pioavailkernel(dd, 0, dd->piobcnt2k + dd->piobcnt4k,
480 TXCHK_CHG_TYPE_KERN, NULL);
481 dd->f_initvl15_bufs(dd);
485 * qib_init - do the actual initialization sequence on the chip
486 * @dd: the qlogic_ib device
487 * @reinit: reinitializing, so don't allocate new memory
489 * Do the actual initialization sequence on the chip. This is done
490 * both from the init routine called from the PCI infrastructure, and
491 * when we reset the chip, or detect that it was reset internally,
492 * or it's administratively re-enabled.
494 * Memory allocation here and in called routines is only done in
495 * the first case (reinit == 0). We have to be careful, because even
496 * without memory allocation, we need to re-write all the chip registers
497 * TIDs, etc. after the reset or enable has completed.
499 int qib_init(struct qib_devdata *dd, int reinit)
501 int ret = 0, pidx, lastfail = 0;
504 struct qib_ctxtdata *rcd;
505 struct qib_pportdata *ppd;
508 /* Set linkstate to unknown, so we can watch for a transition. */
509 for (pidx = 0; pidx < dd->num_pports; ++pidx) {
510 ppd = dd->pport + pidx;
511 spin_lock_irqsave(&ppd->lflags_lock, flags);
512 ppd->lflags &= ~(QIBL_LINKACTIVE | QIBL_LINKARMED |
513 QIBL_LINKDOWN | QIBL_LINKINIT |
515 spin_unlock_irqrestore(&ppd->lflags_lock, flags);
519 ret = init_after_reset(dd);
521 ret = loadtime_init(dd);
525 /* Bypass most chip-init, to get to device creation */
529 ret = dd->f_late_initreg(dd);
533 /* dd->rcd can be NULL if early init failed */
534 for (i = 0; dd->rcd && i < dd->first_user_ctxt; ++i) {
536 * Set up the (kernel) rcvhdr queue and egr TIDs. If doing
537 * re-init, the simplest way to handle this is to free
538 * existing, and re-allocate.
539 * Need to re-create rest of ctxt 0 ctxtdata as well.
545 lastfail = qib_create_rcvhdrq(dd, rcd);
547 lastfail = qib_setup_eagerbufs(rcd);
549 qib_dev_err(dd, "failed to allocate kernel ctxt's "
550 "rcvhdrq and/or egr bufs\n");
555 for (pidx = 0; pidx < dd->num_pports; ++pidx) {
559 ppd = dd->pport + pidx;
560 mtu = ib_mtu_enum_to_int(qib_ibmtu);
562 mtu = QIB_DEFAULT_MTU;
563 qib_ibmtu = 0; /* don't leave invalid value */
565 /* set max we can ever have for this driver load */
566 ppd->init_ibmaxlen = min(mtu > 2048 ?
567 dd->piosize4k : dd->piosize2k,
569 (dd->rcvhdrentsize << 2));
571 * Have to initialize ibmaxlen, but this will normally
572 * change immediately in qib_set_mtu().
574 ppd->ibmaxlen = ppd->init_ibmaxlen;
575 qib_set_mtu(ppd, mtu);
577 spin_lock_irqsave(&ppd->lflags_lock, flags);
578 ppd->lflags |= QIBL_IB_LINK_DISABLED;
579 spin_unlock_irqrestore(&ppd->lflags_lock, flags);
581 lastfail = dd->f_bringup_serdes(ppd);
583 qib_devinfo(dd->pcidev,
584 "Failed to bringup IB port %u\n", ppd->port);
585 lastfail = -ENETDOWN;
593 /* none of the ports initialized */
594 if (!ret && lastfail)
598 /* but continue on, so we can debug cause */
603 init_piobuf_state(dd);
607 /* chip is OK for user apps; mark it as initialized */
608 for (pidx = 0; pidx < dd->num_pports; ++pidx) {
609 ppd = dd->pport + pidx;
611 * Set status even if port serdes is not initialized
612 * so that diags will work.
614 *ppd->statusp |= QIB_STATUS_CHIP_PRESENT |
616 if (!ppd->link_speed_enabled)
618 if (dd->flags & QIB_HAS_SEND_DMA)
619 ret = qib_setup_sdma(ppd);
620 init_timer(&ppd->hol_timer);
621 ppd->hol_timer.function = qib_hol_event;
622 ppd->hol_timer.data = (unsigned long)ppd;
623 ppd->hol_state = QIB_HOL_UP;
626 /* now we can enable all interrupts from the chip */
627 dd->f_set_intr_state(dd, 1);
630 * Setup to verify we get an interrupt, and fallback
631 * to an alternate if necessary and possible.
633 mod_timer(&dd->intrchk_timer, jiffies + HZ/2);
634 /* start stats retrieval timer */
635 mod_timer(&dd->stats_timer, jiffies + HZ * ACTIVITY_TIMER);
638 /* if ret is non-zero, we probably should do some cleanup here... */
643 * These next two routines are placeholders in case we don't have per-arch
644 * code for controlling write combining. If explicit control of write
645 * combining is not available, performance will probably be awful.
648 int __attribute__((weak)) qib_enable_wc(struct qib_devdata *dd)
653 void __attribute__((weak)) qib_disable_wc(struct qib_devdata *dd)
657 static inline struct qib_devdata *__qib_lookup(int unit)
659 return idr_find(&qib_unit_table, unit);
662 struct qib_devdata *qib_lookup(int unit)
664 struct qib_devdata *dd;
667 spin_lock_irqsave(&qib_devs_lock, flags);
668 dd = __qib_lookup(unit);
669 spin_unlock_irqrestore(&qib_devs_lock, flags);
675 * Stop the timers during unit shutdown, or after an error late
678 static void qib_stop_timers(struct qib_devdata *dd)
680 struct qib_pportdata *ppd;
683 if (dd->stats_timer.data) {
684 del_timer_sync(&dd->stats_timer);
685 dd->stats_timer.data = 0;
687 if (dd->intrchk_timer.data) {
688 del_timer_sync(&dd->intrchk_timer);
689 dd->intrchk_timer.data = 0;
691 for (pidx = 0; pidx < dd->num_pports; ++pidx) {
692 ppd = dd->pport + pidx;
693 if (ppd->hol_timer.data)
694 del_timer_sync(&ppd->hol_timer);
695 if (ppd->led_override_timer.data) {
696 del_timer_sync(&ppd->led_override_timer);
697 atomic_set(&ppd->led_override_timer_active, 0);
699 if (ppd->symerr_clear_timer.data)
700 del_timer_sync(&ppd->symerr_clear_timer);
705 * qib_shutdown_device - shut down a device
706 * @dd: the qlogic_ib device
708 * This is called to make the device quiet when we are about to
709 * unload the driver, and also when the device is administratively
710 * disabled. It does not free any data structures.
711 * Everything it does has to be setup again by qib_init(dd, 1)
713 static void qib_shutdown_device(struct qib_devdata *dd)
715 struct qib_pportdata *ppd;
718 for (pidx = 0; pidx < dd->num_pports; ++pidx) {
719 ppd = dd->pport + pidx;
721 spin_lock_irq(&ppd->lflags_lock);
722 ppd->lflags &= ~(QIBL_LINKDOWN | QIBL_LINKINIT |
723 QIBL_LINKARMED | QIBL_LINKACTIVE |
725 spin_unlock_irq(&ppd->lflags_lock);
726 *ppd->statusp &= ~(QIB_STATUS_IB_CONF | QIB_STATUS_IB_READY);
728 dd->flags &= ~QIB_INITTED;
730 /* mask interrupts, but not errors */
731 dd->f_set_intr_state(dd, 0);
733 for (pidx = 0; pidx < dd->num_pports; ++pidx) {
734 ppd = dd->pport + pidx;
735 dd->f_rcvctrl(ppd, QIB_RCVCTRL_TAILUPD_DIS |
736 QIB_RCVCTRL_CTXT_DIS |
737 QIB_RCVCTRL_INTRAVAIL_DIS |
738 QIB_RCVCTRL_PKEY_ENB, -1);
740 * Gracefully stop all sends allowing any in progress to
743 dd->f_sendctrl(ppd, QIB_SENDCTRL_CLEAR);
747 * Enough for anything that's going to trickle out to have actually
752 for (pidx = 0; pidx < dd->num_pports; ++pidx) {
753 ppd = dd->pport + pidx;
754 dd->f_setextled(ppd, 0); /* make sure LEDs are off */
756 if (dd->flags & QIB_HAS_SEND_DMA)
757 qib_teardown_sdma(ppd);
759 dd->f_sendctrl(ppd, QIB_SENDCTRL_AVAIL_DIS |
760 QIB_SENDCTRL_SEND_DIS);
762 * Clear SerdesEnable.
763 * We can't count on interrupts since we are stopping.
765 dd->f_quiet_serdes(ppd);
771 * qib_free_ctxtdata - free a context's allocated data
772 * @dd: the qlogic_ib device
773 * @rcd: the ctxtdata structure
775 * free up any allocated data for a context
776 * This should not touch anything that would affect a simultaneous
777 * re-allocation of context data, because it is called after qib_mutex
778 * is released (and can be called from reinit as well).
779 * It should never change any chip state, or global driver state.
781 void qib_free_ctxtdata(struct qib_devdata *dd, struct qib_ctxtdata *rcd)
787 dma_free_coherent(&dd->pcidev->dev, rcd->rcvhdrq_size,
788 rcd->rcvhdrq, rcd->rcvhdrq_phys);
790 if (rcd->rcvhdrtail_kvaddr) {
791 dma_free_coherent(&dd->pcidev->dev, PAGE_SIZE,
792 rcd->rcvhdrtail_kvaddr,
793 rcd->rcvhdrqtailaddr_phys);
794 rcd->rcvhdrtail_kvaddr = NULL;
797 if (rcd->rcvegrbuf) {
800 for (e = 0; e < rcd->rcvegrbuf_chunks; e++) {
801 void *base = rcd->rcvegrbuf[e];
802 size_t size = rcd->rcvegrbuf_size;
804 dma_free_coherent(&dd->pcidev->dev, size,
805 base, rcd->rcvegrbuf_phys[e]);
807 kfree(rcd->rcvegrbuf);
808 rcd->rcvegrbuf = NULL;
809 kfree(rcd->rcvegrbuf_phys);
810 rcd->rcvegrbuf_phys = NULL;
811 rcd->rcvegrbuf_chunks = 0;
814 kfree(rcd->tid_pg_list);
815 vfree(rcd->user_event_mask);
816 vfree(rcd->subctxt_uregbase);
817 vfree(rcd->subctxt_rcvegrbuf);
818 vfree(rcd->subctxt_rcvhdr_base);
823 * Perform a PIO buffer bandwidth write test, to verify proper system
824 * configuration. Even when all the setup calls work, occasionally
825 * BIOS or other issues can prevent write combining from working, or
826 * can cause other bandwidth problems to the chip.
828 * This test simply writes the same buffer over and over again, and
829 * measures close to the peak bandwidth to the chip (not testing
830 * data bandwidth to the wire). On chips that use an address-based
831 * trigger to send packets to the wire, this is easy. On chips that
832 * use a count to trigger, we want to make sure that the packet doesn't
833 * go out on the wire, or trigger flow control checks.
835 static void qib_verify_pioperf(struct qib_devdata *dd)
837 u32 pbnum, cnt, lcnt;
842 piobuf = dd->f_getsendbuf(dd->pport, 0ULL, &pbnum);
844 qib_devinfo(dd->pcidev,
845 "No PIObufs for checking perf, skipping\n");
850 * Enough to give us a reasonable test, less than piobuf size, and
851 * likely multiple of store buffer length.
857 qib_devinfo(dd->pcidev,
858 "Couldn't get memory for checking PIO perf,"
863 preempt_disable(); /* we want reasonably accurate elapsed time */
864 msecs = 1 + jiffies_to_msecs(jiffies);
865 for (lcnt = 0; lcnt < 10000U; lcnt++) {
866 /* wait until we cross msec boundary */
867 if (jiffies_to_msecs(jiffies) >= msecs)
872 dd->f_set_armlaunch(dd, 0);
875 * length 0, no dwords actually sent
881 * This is only roughly accurate, since even with preempt we
882 * still take interrupts that could take a while. Running for
883 * >= 5 msec seems to get us "close enough" to accurate values.
885 msecs = jiffies_to_msecs(jiffies);
886 for (emsecs = lcnt = 0; emsecs <= 5UL; lcnt++) {
887 qib_pio_copy(piobuf + 64, addr, cnt >> 2);
888 emsecs = jiffies_to_msecs(jiffies) - msecs;
891 /* 1 GiB/sec, slightly over IB SDR line rate */
892 if (lcnt < (emsecs * 1024U))
894 "Performance problem: bandwidth to PIO buffers is "
896 lcnt / (u32) emsecs);
903 /* disarm piobuf, so it's available again */
904 dd->f_sendctrl(dd->pport, QIB_SENDCTRL_DISARM_BUF(pbnum));
905 qib_sendbuf_done(dd, pbnum);
906 dd->f_set_armlaunch(dd, 1);
910 void qib_free_devdata(struct qib_devdata *dd)
914 spin_lock_irqsave(&qib_devs_lock, flags);
915 idr_remove(&qib_unit_table, dd->unit);
917 spin_unlock_irqrestore(&qib_devs_lock, flags);
919 ib_dealloc_device(&dd->verbs_dev.ibdev);
923 * Allocate our primary per-unit data structure. Must be done via verbs
924 * allocator, because the verbs cleanup process both does cleanup and
925 * free of the data structure.
926 * "extra" is for chip-specific data.
928 * Use the idr mechanism to get a unit number for this unit.
930 struct qib_devdata *qib_alloc_devdata(struct pci_dev *pdev, size_t extra)
933 struct qib_devdata *dd;
936 if (!idr_pre_get(&qib_unit_table, GFP_KERNEL)) {
937 dd = ERR_PTR(-ENOMEM);
941 dd = (struct qib_devdata *) ib_alloc_device(sizeof(*dd) + extra);
943 dd = ERR_PTR(-ENOMEM);
947 spin_lock_irqsave(&qib_devs_lock, flags);
948 ret = idr_get_new(&qib_unit_table, dd, &dd->unit);
950 list_add(&dd->list, &qib_dev_list);
951 spin_unlock_irqrestore(&qib_devs_lock, flags);
954 qib_early_err(&pdev->dev,
955 "Could not allocate unit ID: error %d\n", -ret);
956 ib_dealloc_device(&dd->verbs_dev.ibdev);
961 if (!qib_cpulist_count) {
962 u32 count = num_online_cpus();
963 qib_cpulist = kzalloc(BITS_TO_LONGS(count) *
964 sizeof(long), GFP_KERNEL);
966 qib_cpulist_count = count;
968 qib_early_err(&pdev->dev, "Could not alloc cpulist "
969 "info, cpu affinity might be wrong\n");
977 * Called from freeze mode handlers, and from PCI error
978 * reporting code. Should be paranoid about state of
979 * system and data structures.
981 void qib_disable_after_error(struct qib_devdata *dd)
983 if (dd->flags & QIB_INITTED) {
986 dd->flags &= ~QIB_INITTED;
988 for (pidx = 0; pidx < dd->num_pports; ++pidx) {
989 struct qib_pportdata *ppd;
991 ppd = dd->pport + pidx;
992 if (dd->flags & QIB_PRESENT) {
993 qib_set_linkstate(ppd,
994 QIB_IB_LINKDOWN_DISABLE);
995 dd->f_setextled(ppd, 0);
997 *ppd->statusp &= ~QIB_STATUS_IB_READY;
1002 * Mark as having had an error for driver, and also
1003 * for /sys and status word mapped to user programs.
1004 * This marks unit as not usable, until reset.
1007 *dd->devstatusp |= QIB_STATUS_HWERROR;
1010 static void __devexit qib_remove_one(struct pci_dev *);
1011 static int __devinit qib_init_one(struct pci_dev *,
1012 const struct pci_device_id *);
1014 #define DRIVER_LOAD_MSG "QLogic " QIB_DRV_NAME " loaded: "
1015 #define PFX QIB_DRV_NAME ": "
1017 static const struct pci_device_id qib_pci_tbl[] = {
1018 { PCI_DEVICE(PCI_VENDOR_ID_PATHSCALE, PCI_DEVICE_ID_QLOGIC_IB_6120) },
1019 { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_IB_7220) },
1020 { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_IB_7322) },
1024 MODULE_DEVICE_TABLE(pci, qib_pci_tbl);
1026 struct pci_driver qib_driver = {
1027 .name = QIB_DRV_NAME,
1028 .probe = qib_init_one,
1029 .remove = __devexit_p(qib_remove_one),
1030 .id_table = qib_pci_tbl,
1031 .err_handler = &qib_pci_err_handler,
1035 * Do all the generic driver unit- and chip-independent memory
1036 * allocation and initialization.
1038 static int __init qlogic_ib_init(void)
1042 ret = qib_dev_init();
1046 qib_cq_wq = create_singlethread_workqueue("qib_cq");
1053 * These must be called before the driver is registered with
1054 * the PCI subsystem.
1056 idr_init(&qib_unit_table);
1057 if (!idr_pre_get(&qib_unit_table, GFP_KERNEL)) {
1058 printk(KERN_ERR QIB_DRV_NAME ": idr_pre_get() failed\n");
1063 ret = pci_register_driver(&qib_driver);
1065 printk(KERN_ERR QIB_DRV_NAME
1066 ": Unable to register driver: error %d\n", -ret);
1070 /* not fatal if it doesn't work */
1071 if (qib_init_qibfs())
1072 printk(KERN_ERR QIB_DRV_NAME ": Unable to register ipathfs\n");
1073 goto bail; /* all OK */
1076 idr_destroy(&qib_unit_table);
1078 destroy_workqueue(qib_cq_wq);
1085 module_init(qlogic_ib_init);
1088 * Do the non-unit driver cleanup, memory free, etc. at unload.
1090 static void __exit qlogic_ib_cleanup(void)
1094 ret = qib_exit_qibfs();
1096 printk(KERN_ERR QIB_DRV_NAME ": "
1097 "Unable to cleanup counter filesystem: "
1098 "error %d\n", -ret);
1100 pci_unregister_driver(&qib_driver);
1102 destroy_workqueue(qib_cq_wq);
1104 qib_cpulist_count = 0;
1107 idr_destroy(&qib_unit_table);
1111 module_exit(qlogic_ib_cleanup);
1113 /* this can only be called after a successful initialization */
1114 static void cleanup_device_data(struct qib_devdata *dd)
1118 struct qib_ctxtdata **tmp;
1119 unsigned long flags;
1121 /* users can't do anything more with chip */
1122 for (pidx = 0; pidx < dd->num_pports; ++pidx)
1123 if (dd->pport[pidx].statusp)
1124 *dd->pport[pidx].statusp &= ~QIB_STATUS_CHIP_PRESENT;
1129 if (dd->pioavailregs_dma) {
1130 dma_free_coherent(&dd->pcidev->dev, PAGE_SIZE,
1131 (void *) dd->pioavailregs_dma,
1132 dd->pioavailregs_phys);
1133 dd->pioavailregs_dma = NULL;
1136 if (dd->pageshadow) {
1137 struct page **tmpp = dd->pageshadow;
1138 dma_addr_t *tmpd = dd->physshadow;
1141 for (ctxt = 0; ctxt < dd->cfgctxts; ctxt++) {
1142 int ctxt_tidbase = ctxt * dd->rcvtidcnt;
1143 int maxtid = ctxt_tidbase + dd->rcvtidcnt;
1145 for (i = ctxt_tidbase; i < maxtid; i++) {
1148 pci_unmap_page(dd->pcidev, tmpd[i],
1149 PAGE_SIZE, PCI_DMA_FROMDEVICE);
1150 qib_release_user_pages(&tmpp[i], 1);
1156 tmpp = dd->pageshadow;
1157 dd->pageshadow = NULL;
1162 * Free any resources still in use (usually just kernel contexts)
1163 * at unload; we do for ctxtcnt, because that's what we allocate.
1164 * We acquire lock to be really paranoid that rcd isn't being
1165 * accessed from some interrupt-related code (that should not happen,
1166 * but best to be sure).
1168 spin_lock_irqsave(&dd->uctxt_lock, flags);
1171 spin_unlock_irqrestore(&dd->uctxt_lock, flags);
1172 for (ctxt = 0; tmp && ctxt < dd->ctxtcnt; ctxt++) {
1173 struct qib_ctxtdata *rcd = tmp[ctxt];
1175 tmp[ctxt] = NULL; /* debugging paranoia */
1176 qib_free_ctxtdata(dd, rcd);
1179 kfree(dd->boardname);
1183 * Clean up on unit shutdown, or error during unit load after
1184 * successful initialization.
1186 static void qib_postinit_cleanup(struct qib_devdata *dd)
1189 * Clean up chip-specific stuff.
1190 * We check for NULL here, because it's outside
1191 * the kregbase check, and we need to call it
1192 * after the free_irq. Thus it's possible that
1193 * the function pointers were never initialized.
1198 qib_pcie_ddcleanup(dd);
1200 cleanup_device_data(dd);
1202 qib_free_devdata(dd);
1205 static int __devinit qib_init_one(struct pci_dev *pdev,
1206 const struct pci_device_id *ent)
1208 int ret, j, pidx, initfail;
1209 struct qib_devdata *dd = NULL;
1211 ret = qib_pcie_init(pdev, ent);
1216 * Do device-specific initialiation, function table setup, dd
1219 switch (ent->device) {
1220 case PCI_DEVICE_ID_QLOGIC_IB_6120:
1221 #ifdef CONFIG_PCI_MSI
1222 dd = qib_init_iba6120_funcs(pdev, ent);
1224 qib_early_err(&pdev->dev, "QLogic PCIE device 0x%x cannot "
1225 "work if CONFIG_PCI_MSI is not enabled\n",
1227 dd = ERR_PTR(-ENODEV);
1231 case PCI_DEVICE_ID_QLOGIC_IB_7220:
1232 dd = qib_init_iba7220_funcs(pdev, ent);
1235 case PCI_DEVICE_ID_QLOGIC_IB_7322:
1236 dd = qib_init_iba7322_funcs(pdev, ent);
1240 qib_early_err(&pdev->dev, "Failing on unknown QLogic "
1241 "deviceid 0x%x\n", ent->device);
1248 goto bail; /* error already printed */
1250 /* do the generic initialization */
1251 initfail = qib_init(dd, 0);
1253 ret = qib_register_ib_device(dd);
1256 * Now ready for use. this should be cleared whenever we
1257 * detect a reset, or initiate one. If earlier failure,
1258 * we still create devices, so diags, etc. can be used
1259 * to determine cause of problem.
1261 if (!qib_mini_init && !initfail && !ret)
1262 dd->flags |= QIB_INITTED;
1264 j = qib_device_create(dd);
1266 qib_dev_err(dd, "Failed to create /dev devices: %d\n", -j);
1269 qib_dev_err(dd, "Failed filesystem setup for counters: %d\n",
1272 if (qib_mini_init || initfail || ret) {
1273 qib_stop_timers(dd);
1274 flush_workqueue(ib_wq);
1275 for (pidx = 0; pidx < dd->num_pports; ++pidx)
1276 dd->f_quiet_serdes(dd->pport + pidx);
1280 (void) qibfs_remove(dd);
1281 qib_device_remove(dd);
1284 qib_unregister_ib_device(dd);
1285 qib_postinit_cleanup(dd);
1292 ret = qib_enable_wc(dd);
1294 qib_dev_err(dd, "Write combining not enabled "
1295 "(err %d): performance may be poor\n",
1301 qib_verify_pioperf(dd);
1306 static void __devexit qib_remove_one(struct pci_dev *pdev)
1308 struct qib_devdata *dd = pci_get_drvdata(pdev);
1311 /* unregister from IB core */
1312 qib_unregister_ib_device(dd);
1315 * Disable the IB link, disable interrupts on the device,
1316 * clear dma engines, etc.
1319 qib_shutdown_device(dd);
1321 qib_stop_timers(dd);
1323 /* wait until all of our (qsfp) queue_work() calls complete */
1324 flush_workqueue(ib_wq);
1326 ret = qibfs_remove(dd);
1328 qib_dev_err(dd, "Failed counters filesystem cleanup: %d\n",
1331 qib_device_remove(dd);
1333 qib_postinit_cleanup(dd);
1337 * qib_create_rcvhdrq - create a receive header queue
1338 * @dd: the qlogic_ib device
1339 * @rcd: the context data
1341 * This must be contiguous memory (from an i/o perspective), and must be
1342 * DMA'able (which means for some systems, it will go through an IOMMU,
1343 * or be forced into a low address range).
1345 int qib_create_rcvhdrq(struct qib_devdata *dd, struct qib_ctxtdata *rcd)
1349 if (!rcd->rcvhdrq) {
1350 dma_addr_t phys_hdrqtail;
1353 amt = ALIGN(dd->rcvhdrcnt * dd->rcvhdrentsize *
1354 sizeof(u32), PAGE_SIZE);
1355 gfp_flags = (rcd->ctxt >= dd->first_user_ctxt) ?
1356 GFP_USER : GFP_KERNEL;
1357 rcd->rcvhdrq = dma_alloc_coherent(
1358 &dd->pcidev->dev, amt, &rcd->rcvhdrq_phys,
1359 gfp_flags | __GFP_COMP);
1361 if (!rcd->rcvhdrq) {
1362 qib_dev_err(dd, "attempt to allocate %d bytes "
1363 "for ctxt %u rcvhdrq failed\n",
1368 if (rcd->ctxt >= dd->first_user_ctxt) {
1369 rcd->user_event_mask = vmalloc_user(PAGE_SIZE);
1370 if (!rcd->user_event_mask)
1371 goto bail_free_hdrq;
1374 if (!(dd->flags & QIB_NODMA_RTAIL)) {
1375 rcd->rcvhdrtail_kvaddr = dma_alloc_coherent(
1376 &dd->pcidev->dev, PAGE_SIZE, &phys_hdrqtail,
1378 if (!rcd->rcvhdrtail_kvaddr)
1380 rcd->rcvhdrqtailaddr_phys = phys_hdrqtail;
1383 rcd->rcvhdrq_size = amt;
1386 /* clear for security and sanity on each use */
1387 memset(rcd->rcvhdrq, 0, rcd->rcvhdrq_size);
1388 if (rcd->rcvhdrtail_kvaddr)
1389 memset(rcd->rcvhdrtail_kvaddr, 0, PAGE_SIZE);
1393 qib_dev_err(dd, "attempt to allocate 1 page for ctxt %u "
1394 "rcvhdrqtailaddr failed\n", rcd->ctxt);
1395 vfree(rcd->user_event_mask);
1396 rcd->user_event_mask = NULL;
1398 dma_free_coherent(&dd->pcidev->dev, amt, rcd->rcvhdrq,
1400 rcd->rcvhdrq = NULL;
1406 * allocate eager buffers, both kernel and user contexts.
1407 * @rcd: the context we are setting up.
1409 * Allocate the eager TID buffers and program them into hip.
1410 * They are no longer completely contiguous, we do multiple allocation
1411 * calls. Otherwise we get the OOM code involved, by asking for too
1412 * much per call, with disastrous results on some kernels.
1414 int qib_setup_eagerbufs(struct qib_ctxtdata *rcd)
1416 struct qib_devdata *dd = rcd->dd;
1417 unsigned e, egrcnt, egrperchunk, chunk, egrsize, egroff;
1422 * GFP_USER, but without GFP_FS, so buffer cache can be
1423 * coalesced (we hope); otherwise, even at order 4,
1424 * heavy filesystem activity makes these fail, and we can
1425 * use compound pages.
1427 gfp_flags = __GFP_WAIT | __GFP_IO | __GFP_COMP;
1429 egrcnt = rcd->rcvegrcnt;
1430 egroff = rcd->rcvegr_tid_base;
1431 egrsize = dd->rcvegrbufsize;
1433 chunk = rcd->rcvegrbuf_chunks;
1434 egrperchunk = rcd->rcvegrbufs_perchunk;
1435 size = rcd->rcvegrbuf_size;
1436 if (!rcd->rcvegrbuf) {
1438 kzalloc(chunk * sizeof(rcd->rcvegrbuf[0]),
1440 if (!rcd->rcvegrbuf)
1443 if (!rcd->rcvegrbuf_phys) {
1444 rcd->rcvegrbuf_phys =
1445 kmalloc(chunk * sizeof(rcd->rcvegrbuf_phys[0]),
1447 if (!rcd->rcvegrbuf_phys)
1448 goto bail_rcvegrbuf;
1450 for (e = 0; e < rcd->rcvegrbuf_chunks; e++) {
1451 if (rcd->rcvegrbuf[e])
1454 dma_alloc_coherent(&dd->pcidev->dev, size,
1455 &rcd->rcvegrbuf_phys[e],
1457 if (!rcd->rcvegrbuf[e])
1458 goto bail_rcvegrbuf_phys;
1461 rcd->rcvegr_phys = rcd->rcvegrbuf_phys[0];
1463 for (e = chunk = 0; chunk < rcd->rcvegrbuf_chunks; chunk++) {
1464 dma_addr_t pa = rcd->rcvegrbuf_phys[chunk];
1467 /* clear for security and sanity on each use */
1468 memset(rcd->rcvegrbuf[chunk], 0, size);
1470 for (i = 0; e < egrcnt && i < egrperchunk; e++, i++) {
1471 dd->f_put_tid(dd, e + egroff +
1476 RCVHQ_RCV_TYPE_EAGER, pa);
1479 cond_resched(); /* don't hog the cpu */
1484 bail_rcvegrbuf_phys:
1485 for (e = 0; e < rcd->rcvegrbuf_chunks && rcd->rcvegrbuf[e]; e++)
1486 dma_free_coherent(&dd->pcidev->dev, size,
1487 rcd->rcvegrbuf[e], rcd->rcvegrbuf_phys[e]);
1488 kfree(rcd->rcvegrbuf_phys);
1489 rcd->rcvegrbuf_phys = NULL;
1491 kfree(rcd->rcvegrbuf);
1492 rcd->rcvegrbuf = NULL;
1498 * Note: Changes to this routine should be mirrored
1499 * for the diagnostics routine qib_remap_ioaddr32().
1500 * There is also related code for VL15 buffers in qib_init_7322_variables().
1501 * The teardown code that unmaps is in qib_pcie_ddcleanup()
1503 int init_chip_wc_pat(struct qib_devdata *dd, u32 vl15buflen)
1505 u64 __iomem *qib_kregbase = NULL;
1506 void __iomem *qib_piobase = NULL;
1507 u64 __iomem *qib_userbase = NULL;
1509 u64 qib_pio2koffset = dd->piobufbase & 0xffffffff;
1510 u64 qib_pio4koffset = dd->piobufbase >> 32;
1511 u64 qib_pio2klen = dd->piobcnt2k * dd->palign;
1512 u64 qib_pio4klen = dd->piobcnt4k * dd->align4k;
1513 u64 qib_physaddr = dd->physaddr;
1515 u64 qib_userlen = 0;
1518 * Free the old mapping because the kernel will try to reuse the
1519 * old mapping and not create a new mapping with the
1520 * write combining attribute.
1522 iounmap(dd->kregbase);
1523 dd->kregbase = NULL;
1526 * Assumes chip address space looks like:
1527 * - kregs + sregs + cregs + uregs (in any order)
1528 * - piobufs (2K and 4K bufs in either order)
1530 * - kregs + sregs + cregs (in any order)
1531 * - piobufs (2K and 4K bufs in either order)
1534 if (dd->piobcnt4k == 0) {
1535 qib_kreglen = qib_pio2koffset;
1536 qib_piolen = qib_pio2klen;
1537 } else if (qib_pio2koffset < qib_pio4koffset) {
1538 qib_kreglen = qib_pio2koffset;
1539 qib_piolen = qib_pio4koffset + qib_pio4klen - qib_kreglen;
1541 qib_kreglen = qib_pio4koffset;
1542 qib_piolen = qib_pio2koffset + qib_pio2klen - qib_kreglen;
1544 qib_piolen += vl15buflen;
1545 /* Map just the configured ports (not all hw ports) */
1546 if (dd->uregbase > qib_kreglen)
1547 qib_userlen = dd->ureg_align * dd->cfgctxts;
1549 /* Sanity checks passed, now create the new mappings */
1550 qib_kregbase = ioremap_nocache(qib_physaddr, qib_kreglen);
1554 qib_piobase = ioremap_wc(qib_physaddr + qib_kreglen, qib_piolen);
1559 qib_userbase = ioremap_nocache(qib_physaddr + dd->uregbase,
1565 dd->kregbase = qib_kregbase;
1566 dd->kregend = (u64 __iomem *)
1567 ((char __iomem *) qib_kregbase + qib_kreglen);
1568 dd->piobase = qib_piobase;
1569 dd->pio2kbase = (void __iomem *)
1570 (((char __iomem *) dd->piobase) +
1571 qib_pio2koffset - qib_kreglen);
1573 dd->pio4kbase = (void __iomem *)
1574 (((char __iomem *) dd->piobase) +
1575 qib_pio4koffset - qib_kreglen);
1577 /* ureg will now be accessed relative to dd->userbase */
1578 dd->userbase = qib_userbase;
1582 iounmap(qib_piobase);
1584 iounmap(qib_kregbase);