drivers/ide/pci/sgiioc4.c

   1 /*
   2  * Copyright (c) 2003-2006 Silicon Graphics, Inc.  All Rights Reserved.
   3  *
   4  * This program is free software; you can redistribute it and/or modify it
   5  * under the terms of version 2 of the GNU General Public License
   6  * as published by the Free Software Foundation.
   7  *
   8  * This program is distributed in the hope that it would be useful, but
   9  * WITHOUT ANY WARRANTY; without even the implied warranty of
  10  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
  11  *
  12  * You should have received a copy of the GNU General Public
  13  * License along with this program; if not, write the Free Software
  14  * Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
  15  *
  16  * For further information regarding this notice, see:
  17  *
  18  * http://oss.sgi.com/projects/GenInfo/NoticeExplan
  19  */
  20
  21 #include <linux/module.h>
  22 #include <linux/types.h>
  23 #include <linux/pci.h>
  24 #include <linux/delay.h>
  25 #include <linux/hdreg.h>
  26 #include <linux/init.h>
  27 #include <linux/kernel.h>
  28 #include <linux/ioport.h>
  29 #include <linux/blkdev.h>
  30 #include <linux/scatterlist.h>
  31 #include <linux/ioc4.h>
  32 #include <asm/io.h>
  33
  34 #include <linux/ide.h>
  35
  36 #define DRV_NAME "SGIIOC4"
  37
  38 /* IOC4 Specific Definitions */
  39 #define IOC4_CMD_OFFSET         0x100
  40 #define IOC4_CTRL_OFFSET        0x120
  41 #define IOC4_DMA_OFFSET         0x140
  42 #define IOC4_INTR_OFFSET        0x0
  43
  44 #define IOC4_TIMING             0x00
  45 #define IOC4_DMA_PTR_L          0x01
  46 #define IOC4_DMA_PTR_H          0x02
  47 #define IOC4_DMA_ADDR_L         0x03
  48 #define IOC4_DMA_ADDR_H         0x04
  49 #define IOC4_BC_DEV             0x05
  50 #define IOC4_BC_MEM             0x06
  51 #define IOC4_DMA_CTRL           0x07
  52 #define IOC4_DMA_END_ADDR       0x08
  53
  54 /* Bits in the IOC4 Control/Status Register */
  55 #define IOC4_S_DMA_START        0x01
  56 #define IOC4_S_DMA_STOP         0x02
  57 #define IOC4_S_DMA_DIR          0x04
  58 #define IOC4_S_DMA_ACTIVE       0x08
  59 #define IOC4_S_DMA_ERROR        0x10
  60 #define IOC4_ATA_MEMERR         0x02
  61
  62 /* Read/Write Directions */
  63 #define IOC4_DMA_WRITE          0x04
  64 #define IOC4_DMA_READ           0x00
  65
  66 /* Interrupt Register Offsets */
  67 #define IOC4_INTR_REG           0x03
  68 #define IOC4_INTR_SET           0x05
  69 #define IOC4_INTR_CLEAR         0x07
  70
  71 #define IOC4_IDE_CACHELINE_SIZE 128
  72 #define IOC4_CMD_CTL_BLK_SIZE   0x20
  73 #define IOC4_SUPPORTED_FIRMWARE_REV 46
  74
  75 typedef struct {
  76         u32 timing_reg0;
  77         u32 timing_reg1;
  78         u32 low_mem_ptr;
  79         u32 high_mem_ptr;
  80         u32 low_mem_addr;
  81         u32 high_mem_addr;
  82         u32 dev_byte_count;
  83         u32 mem_byte_count;
  84         u32 status;
  85 } ioc4_dma_regs_t;
  86
  87 /* Each Physical Region Descriptor Entry size is 16 bytes (2 * 64 bits) */
  88 /* IOC4 has only 1 IDE channel */
  89 #define IOC4_PRD_BYTES       16
  90 #define IOC4_PRD_ENTRIES     (PAGE_SIZE /(4*IOC4_PRD_BYTES))
  91
  92
  93 static void
  94 sgiioc4_init_hwif_ports(hw_regs_t * hw, unsigned long data_port,
  95                         unsigned long ctrl_port, unsigned long irq_port)
  96 {
  97         unsigned long reg = data_port;
  98         int i;
  99
 100         /* Registers are word (32 bit) aligned */
 101         for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++)
 102                 hw->io_ports[i] = reg + i * 4;
 103
 104         if (ctrl_port)
 105                 hw->io_ports[IDE_CONTROL_OFFSET] = ctrl_port;
 106
 107         if (irq_port)
 108                 hw->io_ports[IDE_IRQ_OFFSET] = irq_port;
 109 }
 110
 111 static void
 112 sgiioc4_maskproc(ide_drive_t * drive, int mask)
 113 {
 114         writeb(mask ? (drive->ctl | 2) : (drive->ctl & ~2),
 115                (void __iomem *)IDE_CONTROL_REG);
 116 }
 117
 118
 119 static int
 120 sgiioc4_checkirq(ide_hwif_t * hwif)
 121 {
 122         unsigned long intr_addr =
 123                 hwif->io_ports[IDE_IRQ_OFFSET] + IOC4_INTR_REG * 4;
 124
 125         if ((u8)readl((void __iomem *)intr_addr) & 0x03)
 126                 return 1;
 127
 128         return 0;
 129 }
 130
 131 static u8 sgiioc4_INB(unsigned long);
 132
 133 static int
 134 sgiioc4_clearirq(ide_drive_t * drive)
 135 {
 136         u32 intr_reg;
 137         ide_hwif_t *hwif = HWIF(drive);
 138         unsigned long other_ir =
 139             hwif->io_ports[IDE_IRQ_OFFSET] + (IOC4_INTR_REG << 2);
 140
 141         /* Code to check for PCI error conditions */
 142         intr_reg = readl((void __iomem *)other_ir);
 143         if (intr_reg & 0x03) { /* Valid IOC4-IDE interrupt */
 144                 /*
 145                  * Using sgiioc4_INB to read the IDE_STATUS_REG has a side effect
 146                  * of clearing the interrupt.  The first read should clear it
 147                  * if it is set.  The second read should return a "clear" status
 148                  * if it got cleared.  If not, then spin for a bit trying to
 149                  * clear it.
 150                  */
 151                 u8 stat = sgiioc4_INB(IDE_STATUS_REG);
 152                 int count = 0;
 153                 stat = sgiioc4_INB(IDE_STATUS_REG);
 154                 while ((stat & 0x80) && (count++ < 100)) {
 155                         udelay(1);
 156                         stat = sgiioc4_INB(IDE_STATUS_REG);
 157                 }
 158
 159                 if (intr_reg & 0x02) {
 160                         struct pci_dev *dev = to_pci_dev(hwif->dev);
 161                         /* Error when transferring DMA data on PCI bus */
 162                         u32 pci_err_addr_low, pci_err_addr_high,
 163                             pci_stat_cmd_reg;
 164
 165                         pci_err_addr_low =
 166                                 readl((void __iomem *)hwif->io_ports[IDE_IRQ_OFFSET]);
 167                         pci_err_addr_high =
 168                                 readl((void __iomem *)(hwif->io_ports[IDE_IRQ_OFFSET] + 4));
 169                         pci_read_config_dword(dev, PCI_COMMAND,
 170                                               &pci_stat_cmd_reg);
 171                         printk(KERN_ERR
 172                                "%s(%s) : PCI Bus Error when doing DMA:"
 173                                    " status-cmd reg is 0x%x\n",
 174                                __FUNCTION__, drive->name, pci_stat_cmd_reg);
 175                         printk(KERN_ERR
 176                                "%s(%s) : PCI Error Address is 0x%x%x\n",
 177                                __FUNCTION__, drive->name,
 178                                pci_err_addr_high, pci_err_addr_low);
 179                         /* Clear the PCI Error indicator */
 180                         pci_write_config_dword(dev, PCI_COMMAND, 0x00000146);
 181                 }
 182
 183                 /* Clear the Interrupt, Error bits on the IOC4 */
 184                 writel(0x03, (void __iomem *)other_ir);
 185
 186                 intr_reg = readl((void __iomem *)other_ir);
 187         }
 188
 189         return intr_reg & 3;
 190 }
 191
 192 static void sgiioc4_ide_dma_start(ide_drive_t * drive)
 193 {
 194         ide_hwif_t *hwif = HWIF(drive);
 195         unsigned long ioc4_dma_addr = hwif->dma_base + IOC4_DMA_CTRL * 4;
 196         unsigned int reg = readl((void __iomem *)ioc4_dma_addr);
 197         unsigned int temp_reg = reg | IOC4_S_DMA_START;
 198
 199         writel(temp_reg, (void __iomem *)ioc4_dma_addr);
 200 }
 201
 202 static u32
 203 sgiioc4_ide_dma_stop(ide_hwif_t *hwif, u64 dma_base)
 204 {
 205         unsigned long ioc4_dma_addr = dma_base + IOC4_DMA_CTRL * 4;
 206         u32     ioc4_dma;
 207         int     count;
 208
 209         count = 0;
 210         ioc4_dma = readl((void __iomem *)ioc4_dma_addr);
 211         while ((ioc4_dma & IOC4_S_DMA_STOP) && (count++ < 200)) {
 212                 udelay(1);
 213                 ioc4_dma = readl((void __iomem *)ioc4_dma_addr);
 214         }
 215         return ioc4_dma;
 216 }
 217
 218 /* Stops the IOC4 DMA Engine */
 219 static int
 220 sgiioc4_ide_dma_end(ide_drive_t * drive)
 221 {
 222         u32 ioc4_dma, bc_dev, bc_mem, num, valid = 0, cnt = 0;
 223         ide_hwif_t *hwif = HWIF(drive);
 224         unsigned long dma_base = hwif->dma_base;
 225         int dma_stat = 0;
 226         unsigned long *ending_dma = ide_get_hwifdata(hwif);
 227
 228         writel(IOC4_S_DMA_STOP, (void __iomem *)(dma_base + IOC4_DMA_CTRL * 4));
 229
 230         ioc4_dma = sgiioc4_ide_dma_stop(hwif, dma_base);
 231
 232         if (ioc4_dma & IOC4_S_DMA_STOP) {
 233                 printk(KERN_ERR
 234                        "%s(%s): IOC4 DMA STOP bit is still 1 :"
 235                        "ioc4_dma_reg 0x%x\n",
 236                        __FUNCTION__, drive->name, ioc4_dma);
 237                 dma_stat = 1;
 238         }
 239
 240         /*
 241          * The IOC4 will DMA 1's to the ending dma area to indicate that
 242          * previous data DMA is complete.  This is necessary because of relaxed
 243          * ordering between register reads and DMA writes on the Altix.
 244          */
 245         while ((cnt++ < 200) && (!valid)) {
 246                 for (num = 0; num < 16; num++) {
 247                         if (ending_dma[num]) {
 248                                 valid = 1;
 249                                 break;
 250                         }
 251                 }
 252                 udelay(1);
 253         }
 254         if (!valid) {
 255                 printk(KERN_ERR "%s(%s) : DMA incomplete\n", __FUNCTION__,
 256                        drive->name);
 257                 dma_stat = 1;
 258         }
 259
 260         bc_dev = readl((void __iomem *)(dma_base + IOC4_BC_DEV * 4));
 261         bc_mem = readl((void __iomem *)(dma_base + IOC4_BC_MEM * 4));
 262
 263         if ((bc_dev & 0x01FF) || (bc_mem & 0x1FF)) {
 264                 if (bc_dev > bc_mem + 8) {
 265                         printk(KERN_ERR
 266                                "%s(%s): WARNING!! byte_count_dev %d "
 267                                "!= byte_count_mem %d\n",
 268                                __FUNCTION__, drive->name, bc_dev, bc_mem);
 269                 }
 270         }
 271
 272         drive->waiting_for_dma = 0;
 273         ide_destroy_dmatable(drive);
 274
 275         return dma_stat;
 276 }
 277
 278 static void sgiioc4_set_dma_mode(ide_drive_t *drive, const u8 speed)
 279 {
 280 }
 281
 282 /* returns 1 if dma irq issued, 0 otherwise */
 283 static int
 284 sgiioc4_ide_dma_test_irq(ide_drive_t * drive)
 285 {
 286         return sgiioc4_checkirq(HWIF(drive));
 287 }
 288
 289 static void sgiioc4_dma_host_set(ide_drive_t *drive, int on)
 290 {
 291         if (!on)
 292                 sgiioc4_clearirq(drive);
 293 }
 294
 295 static void
 296 sgiioc4_resetproc(ide_drive_t * drive)
 297 {
 298         sgiioc4_ide_dma_end(drive);
 299         sgiioc4_clearirq(drive);
 300 }
 301
 302 static void
 303 sgiioc4_dma_lost_irq(ide_drive_t * drive)
 304 {
 305         sgiioc4_resetproc(drive);
 306
 307         ide_dma_lost_irq(drive);
 308 }
 309
 310 static u8
 311 sgiioc4_INB(unsigned long port)
 312 {
 313         u8 reg = (u8) readb((void __iomem *) port);
 314
 315         if ((port & 0xFFF) == 0x11C) {  /* Status register of IOC4 */
 316                 if (reg & 0x51) {       /* Not busy...check for interrupt */
 317                         unsigned long other_ir = port - 0x110;
 318                         unsigned int intr_reg = (u32) readl((void __iomem *) other_ir);
 319
 320                         /* Clear the Interrupt, Error bits on the IOC4 */
 321                         if (intr_reg & 0x03) {
 322                                 writel(0x03, (void __iomem *) other_ir);
 323                                 intr_reg = (u32) readl((void __iomem *) other_ir);
 324                         }
 325                 }
 326         }
 327
 328         return reg;
 329 }
 330
 331 /* Creates a dma map for the scatter-gather list entries */
 332 static int __devinit
 333 ide_dma_sgiioc4(ide_hwif_t * hwif, unsigned long dma_base)
 334 {
 335         struct pci_dev *dev = to_pci_dev(hwif->dev);
 336         void __iomem *virt_dma_base;
 337         int num_ports = sizeof (ioc4_dma_regs_t);
 338         void *pad;
 339
 340         printk(KERN_INFO "%s: BM-DMA at 0x%04lx-0x%04lx\n", hwif->name,
 341                dma_base, dma_base + num_ports - 1);
 342
 343         if (!request_mem_region(dma_base, num_ports, hwif->name)) {
 344                 printk(KERN_ERR
 345                        "%s(%s) -- ERROR, Addresses 0x%p to 0x%p "
 346                        "ALREADY in use\n",
 347                        __FUNCTION__, hwif->name, (void *) dma_base,
 348                        (void *) dma_base + num_ports - 1);
 349                 return -1;
 350         }
 351
 352         virt_dma_base = ioremap(dma_base, num_ports);
 353         if (virt_dma_base == NULL) {
 354                 printk(KERN_ERR
 355                        "%s(%s) -- ERROR, Unable to map addresses 0x%lx to 0x%lx\n",
 356                        __FUNCTION__, hwif->name, dma_base, dma_base + num_ports - 1);
 357                 goto dma_remap_failure;
 358         }
 359         hwif->dma_base = (unsigned long) virt_dma_base;
 360
 361         hwif->dmatable_cpu = pci_alloc_consistent(dev,
 362                                           IOC4_PRD_ENTRIES * IOC4_PRD_BYTES,
 363                                           &hwif->dmatable_dma);
 364
 365         if (!hwif->dmatable_cpu)
 366                 goto dma_pci_alloc_failure;
 367
 368         hwif->sg_max_nents = IOC4_PRD_ENTRIES;
 369
 370         pad = pci_alloc_consistent(dev, IOC4_IDE_CACHELINE_SIZE,
 371                                    (dma_addr_t *) &(hwif->dma_status));
 372
 373         if (pad) {
 374                 ide_set_hwifdata(hwif, pad);
 375                 return 0;
 376         }
 377
 378         pci_free_consistent(dev, IOC4_PRD_ENTRIES * IOC4_PRD_BYTES,
 379                             hwif->dmatable_cpu, hwif->dmatable_dma);
 380         printk(KERN_INFO
 381                "%s() -- Error! Unable to allocate DMA Maps for drive %s\n",
 382                __FUNCTION__, hwif->name);
 383         printk(KERN_INFO
 384                "Changing from DMA to PIO mode for Drive %s\n", hwif->name);
 385
 386 dma_pci_alloc_failure:
 387         iounmap(virt_dma_base);
 388
 389 dma_remap_failure:
 390         release_mem_region(dma_base, num_ports);
 391
 392         return -1;
 393 }
 394
 395 /* Initializes the IOC4 DMA Engine */
 396 static void
 397 sgiioc4_configure_for_dma(int dma_direction, ide_drive_t * drive)
 398 {
 399         u32 ioc4_dma;
 400         ide_hwif_t *hwif = HWIF(drive);
 401         unsigned long dma_base = hwif->dma_base;
 402         unsigned long ioc4_dma_addr = dma_base + IOC4_DMA_CTRL * 4;
 403         u32 dma_addr, ending_dma_addr;
 404
 405         ioc4_dma = readl((void __iomem *)ioc4_dma_addr);
 406
 407         if (ioc4_dma & IOC4_S_DMA_ACTIVE) {
 408                 printk(KERN_WARNING
 409                         "%s(%s):Warning!! DMA from previous transfer was still active\n",
 410                        __FUNCTION__, drive->name);
 411                 writel(IOC4_S_DMA_STOP, (void __iomem *)ioc4_dma_addr);
 412                 ioc4_dma = sgiioc4_ide_dma_stop(hwif, dma_base);
 413
 414                 if (ioc4_dma & IOC4_S_DMA_STOP)
 415                         printk(KERN_ERR
 416                                "%s(%s) : IOC4 Dma STOP bit is still 1\n",
 417                                __FUNCTION__, drive->name);
 418         }
 419
 420         ioc4_dma = readl((void __iomem *)ioc4_dma_addr);
 421         if (ioc4_dma & IOC4_S_DMA_ERROR) {
 422                 printk(KERN_WARNING
 423                        "%s(%s) : Warning!! - DMA Error during Previous"
 424                        " transfer | status 0x%x\n",
 425                        __FUNCTION__, drive->name, ioc4_dma);
 426                 writel(IOC4_S_DMA_STOP, (void __iomem *)ioc4_dma_addr);
 427                 ioc4_dma = sgiioc4_ide_dma_stop(hwif, dma_base);
 428
 429                 if (ioc4_dma & IOC4_S_DMA_STOP)
 430                         printk(KERN_ERR
 431                                "%s(%s) : IOC4 DMA STOP bit is still 1\n",
 432                                __FUNCTION__, drive->name);
 433         }
 434
 435         /* Address of the Scatter Gather List */
 436         dma_addr = cpu_to_le32(hwif->dmatable_dma);
 437         writel(dma_addr, (void __iomem *)(dma_base + IOC4_DMA_PTR_L * 4));
 438
 439         /* Address of the Ending DMA */
 440         memset(ide_get_hwifdata(hwif), 0, IOC4_IDE_CACHELINE_SIZE);
 441         ending_dma_addr = cpu_to_le32(hwif->dma_status);
 442         writel(ending_dma_addr, (void __iomem *)(dma_base + IOC4_DMA_END_ADDR * 4));
 443
 444         writel(dma_direction, (void __iomem *)ioc4_dma_addr);
 445         drive->waiting_for_dma = 1;
 446 }
 447
 448 /* IOC4 Scatter Gather list Format                                       */
 449 /* 128 Bit entries to support 64 bit addresses in the future             */
 450 /* The Scatter Gather list Entry should be in the BIG-ENDIAN Format      */
 451 /* --------------------------------------------------------------------- */
 452 /* | Upper 32 bits - Zero           |           Lower 32 bits- address | */
 453 /* --------------------------------------------------------------------- */
 454 /* | Upper 32 bits - Zero           |EOL| 15 unused     | 16 Bit Length| */
 455 /* --------------------------------------------------------------------- */
 456 /* Creates the scatter gather list, DMA Table */
 457 static unsigned int
 458 sgiioc4_build_dma_table(ide_drive_t * drive, struct request *rq, int ddir)
 459 {
 460         ide_hwif_t *hwif = HWIF(drive);
 461         unsigned int *table = hwif->dmatable_cpu;
 462         unsigned int count = 0, i = 1;
 463         struct scatterlist *sg;
 464
 465         hwif->sg_nents = i = ide_build_sglist(drive, rq);
 466
 467         if (!i)
 468                 return 0;       /* sglist of length Zero */
 469
 470         sg = hwif->sg_table;
 471         while (i && sg_dma_len(sg)) {
 472                 dma_addr_t cur_addr;
 473                 int cur_len;
 474                 cur_addr = sg_dma_address(sg);
 475                 cur_len = sg_dma_len(sg);
 476
 477                 while (cur_len) {
 478                         if (count++ >= IOC4_PRD_ENTRIES) {
 479                                 printk(KERN_WARNING
 480                                        "%s: DMA table too small\n",
 481                                        drive->name);
 482                                 goto use_pio_instead;
 483                         } else {
 484                                 u32 bcount =
 485                                     0x10000 - (cur_addr & 0xffff);
 486
 487                                 if (bcount > cur_len)
 488                                         bcount = cur_len;
 489
 490                                 /* put the addr, length in
 491                                  * the IOC4 dma-table format */
 492                                 *table = 0x0;
 493                                 table++;
 494                                 *table = cpu_to_be32(cur_addr);
 495                                 table++;
 496                                 *table = 0x0;
 497                                 table++;
 498
 499                                 *table = cpu_to_be32(bcount);
 500                                 table++;
 501
 502                                 cur_addr += bcount;
 503                                 cur_len -= bcount;
 504                         }
 505                 }
 506
 507                 sg = sg_next(sg);
 508                 i--;
 509         }
 510
 511         if (count) {
 512                 table--;
 513                 *table |= cpu_to_be32(0x80000000);
 514                 return count;
 515         }
 516
 517 use_pio_instead:
 518         ide_destroy_dmatable(drive);
 519
 520         return 0;               /* revert to PIO for this request */
 521 }
 522
 523 static int sgiioc4_ide_dma_setup(ide_drive_t *drive)
 524 {
 525         struct request *rq = HWGROUP(drive)->rq;
 526         unsigned int count = 0;
 527         int ddir;
 528
 529         if (rq_data_dir(rq))
 530                 ddir = PCI_DMA_TODEVICE;
 531         else
 532                 ddir = PCI_DMA_FROMDEVICE;
 533
 534         if (!(count = sgiioc4_build_dma_table(drive, rq, ddir))) {
 535                 /* try PIO instead of DMA */
 536                 ide_map_sg(drive, rq);
 537                 return 1;
 538         }
 539
 540         if (rq_data_dir(rq))
 541                 /* Writes TO the IOC4 FROM Main Memory */
 542                 ddir = IOC4_DMA_READ;
 543         else
 544                 /* Writes FROM the IOC4 TO Main Memory */
 545                 ddir = IOC4_DMA_WRITE;
 546
 547         sgiioc4_configure_for_dma(ddir, drive);
 548
 549         return 0;
 550 }
 551
 552 static void __devinit
 553 ide_init_sgiioc4(ide_hwif_t * hwif)
 554 {
 555         hwif->mmio = 1;
 556         hwif->set_pio_mode = NULL; /* Sets timing for PIO mode */
 557         hwif->set_dma_mode = &sgiioc4_set_dma_mode;
 558         hwif->selectproc = NULL;/* Use the default routine to select drive */
 559         hwif->reset_poll = NULL;/* No HBA specific reset_poll needed */
 560         hwif->pre_reset = NULL; /* No HBA specific pre_set needed */
 561         hwif->resetproc = &sgiioc4_resetproc;/* Reset DMA engine,
 562                                                 clear interrupts */
 563         hwif->maskproc = &sgiioc4_maskproc;     /* Mask on/off NIEN register */
 564         hwif->quirkproc = NULL;
 565         hwif->busproc = NULL;
 566
 567         hwif->INB = &sgiioc4_INB;
 568
 569         if (hwif->dma_base == 0)
 570                 return;
 571
 572         hwif->dma_host_set = &sgiioc4_dma_host_set;
 573         hwif->dma_setup = &sgiioc4_ide_dma_setup;
 574         hwif->dma_start = &sgiioc4_ide_dma_start;
 575         hwif->ide_dma_end = &sgiioc4_ide_dma_end;
 576         hwif->ide_dma_test_irq = &sgiioc4_ide_dma_test_irq;
 577         hwif->dma_lost_irq = &sgiioc4_dma_lost_irq;
 578         hwif->dma_timeout = &ide_dma_timeout;
 579 }
 580
 581 static const struct ide_port_info sgiioc4_port_info __devinitdata = {
 582         .chipset                = ide_pci,
 583         .host_flags             = IDE_HFLAG_NO_DMA | /* no SFF-style DMA */
 584                                   IDE_HFLAG_NO_AUTOTUNE,
 585         .mwdma_mask             = ATA_MWDMA2_ONLY,
 586 };
 587
 588 static int __devinit
 589 sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
 590 {
 591         unsigned long cmd_base, dma_base, irqport;
 592         unsigned long bar0, cmd_phys_base, ctl;
 593         void __iomem *virt_base;
 594         ide_hwif_t *hwif;
 595         int h;
 596         u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
 597         hw_regs_t hw;
 598         struct ide_port_info d = sgiioc4_port_info;
 599
 600         /*
 601          * Find an empty HWIF; if none available, return -ENOMEM.
 602          */
 603         for (h = 0; h < MAX_HWIFS; ++h) {
 604                 hwif = &ide_hwifs[h];
 605                 if (hwif->chipset == ide_unknown)
 606                         break;
 607         }
 608         if (h == MAX_HWIFS) {
 609                 printk(KERN_ERR "%s: too many IDE interfaces, no room in table\n",
 610                                 DRV_NAME);
 611                 return -ENOMEM;
 612         }
 613
 614         /*  Get the CmdBlk and CtrlBlk Base Registers */
 615         bar0 = pci_resource_start(dev, 0);
 616         virt_base = ioremap(bar0, pci_resource_len(dev, 0));
 617         if (virt_base == NULL) {
 618                 printk(KERN_ERR "%s: Unable to remap BAR 0 address: 0x%lx\n",
 619                                 DRV_NAME, bar0);
 620                 return -ENOMEM;
 621         }
 622         cmd_base = (unsigned long) virt_base + IOC4_CMD_OFFSET;
 623         ctl = (unsigned long) virt_base + IOC4_CTRL_OFFSET;
 624         irqport = (unsigned long) virt_base + IOC4_INTR_OFFSET;
 625         dma_base = pci_resource_start(dev, 0) + IOC4_DMA_OFFSET;
 626
 627         cmd_phys_base = bar0 + IOC4_CMD_OFFSET;
 628         if (!request_mem_region(cmd_phys_base, IOC4_CMD_CTL_BLK_SIZE,
 629             hwif->name)) {
 630                 printk(KERN_ERR
 631                         "%s : %s -- ERROR, Addresses "
 632                         "0x%p to 0x%p ALREADY in use\n",
 633                        __FUNCTION__, hwif->name, (void *) cmd_phys_base,
 634                        (void *) cmd_phys_base + IOC4_CMD_CTL_BLK_SIZE);
 635                 return -ENOMEM;
 636         }
 637
 638         /* Initialize the IO registers */
 639         memset(&hw, 0, sizeof(hw));
 640         sgiioc4_init_hwif_ports(&hw, cmd_base, ctl, irqport);
 641         hw.irq = dev->irq;
 642         hw.chipset = ide_pci;
 643         hw.dev = &dev->dev;
 644         ide_init_port_hw(hwif, &hw);
 645
 646         hwif->dev = &dev->dev;
 647
 648         /* The IOC4 uses MMIO rather than Port IO. */
 649         default_hwif_mmiops(hwif);
 650
 651         /* Initializing chipset IRQ Registers */
 652         writel(0x03, (void __iomem *)(irqport + IOC4_INTR_SET * 4));
 653
 654         if (dma_base == 0 || ide_dma_sgiioc4(hwif, dma_base)) {
 655                 printk(KERN_INFO "%s: %s Bus-Master DMA disabled\n",
 656                                  hwif->name, DRV_NAME);
 657                 d.mwdma_mask = 0;
 658         }
 659
 660         ide_init_sgiioc4(hwif);
 661
 662         idx[0] = hwif->index;
 663
 664         if (ide_device_add(idx, &d))
 665                 return -EIO;
 666
 667         return 0;
 668 }
 669
 670 static unsigned int __devinit
 671 pci_init_sgiioc4(struct pci_dev *dev)
 672 {
 673         int ret;
 674
 675         printk(KERN_INFO "%s: IDE controller at PCI slot %s, revision %d\n",
 676                          DRV_NAME, pci_name(dev), dev->revision);
 677
 678         if (dev->revision < IOC4_SUPPORTED_FIRMWARE_REV) {
 679                 printk(KERN_ERR "Skipping %s IDE controller in slot %s: "
 680                                 "firmware is obsolete - please upgrade to "
 681                                 "revision46 or higher\n",
 682                                 DRV_NAME, pci_name(dev));
 683                 ret = -EAGAIN;
 684                 goto out;
 685         }
 686         ret = sgiioc4_ide_setup_pci_device(dev);
 687 out:
 688         return ret;
 689 }
 690
 691 int
 692 ioc4_ide_attach_one(struct ioc4_driver_data *idd)
 693 {
 694         /* PCI-RT does not bring out IDE connection.
 695          * Do not attach to this particular IOC4.
 696          */
 697         if (idd->idd_variant == IOC4_VARIANT_PCI_RT)
 698                 return 0;
 699
 700         return pci_init_sgiioc4(idd->idd_pdev);
 701 }
 702
 703 static struct ioc4_submodule ioc4_ide_submodule = {
 704         .is_name = "IOC4_ide",
 705         .is_owner = THIS_MODULE,
 706         .is_probe = ioc4_ide_attach_one,
 707 /*      .is_remove = ioc4_ide_remove_one,       */
 708 };
 709
 710 static int __init ioc4_ide_init(void)
 711 {
 712         return ioc4_register_submodule(&ioc4_ide_submodule);
 713 }
 714
 715 late_initcall(ioc4_ide_init); /* Call only after IDE init is done */
 716
 717 MODULE_AUTHOR("Aniket Malatpure/Jeremy Higdon");
 718 MODULE_DESCRIPTION("IDE PCI driver module for SGI IOC4 Base-IO Card");
 719 MODULE_LICENSE("GPL");