drivers/hwmon/w83781d.c

   1 /*
   2     w83781d.c - Part of lm_sensors, Linux kernel modules for hardware
   3                 monitoring
   4     Copyright (c) 1998 - 2001  Frodo Looijaard <frodol@dds.nl>,
   5                                Philip Edelbrock <phil@netroedge.com>,
   6                                and Mark Studebaker <mdsxyz123@yahoo.com>
   7     Copyright (c) 2007         Jean Delvare <khali@linux-fr.org>
   8
   9     This program is free software; you can redistribute it and/or modify
  10     it under the terms of the GNU General Public License as published by
  11     the Free Software Foundation; either version 2 of the License, or
  12     (at your option) any later version.
  13
  14     This program is distributed in the hope that it will be useful,
  15     but WITHOUT ANY WARRANTY; without even the implied warranty of
  16     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17     GNU General Public License for more details.
  18
  19     You should have received a copy of the GNU General Public License
  20     along with this program; if not, write to the Free Software
  21     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  22 */
  23
  24 /*
  25     Supports following chips:
  26
  27     Chip        #vin    #fanin  #pwm    #temp   wchipid vendid  i2c     ISA
  28     as99127f    7       3       0       3       0x31    0x12c3  yes     no
  29     as99127f rev.2 (type_name = as99127f)       0x31    0x5ca3  yes     no
  30     w83781d     7       3       0       3       0x10-1  0x5ca3  yes     yes
  31     w83782d     9       3       2-4     3       0x30    0x5ca3  yes     yes
  32     w83783s     5-6     3       2       1-2     0x40    0x5ca3  yes     no
  33
  34 */
  35
  36 #include <linux/module.h>
  37 #include <linux/init.h>
  38 #include <linux/slab.h>
  39 #include <linux/jiffies.h>
  40 #include <linux/i2c.h>
  41 #include <linux/platform_device.h>
  42 #include <linux/ioport.h>
  43 #include <linux/hwmon.h>
  44 #include <linux/hwmon-vid.h>
  45 #include <linux/hwmon-sysfs.h>
  46 #include <linux/sysfs.h>
  47 #include <linux/err.h>
  48 #include <linux/mutex.h>
  49 #include <asm/io.h>
  50 #include "lm75.h"
  51
  52 /* ISA device, if found */
  53 static struct platform_device *pdev;
  54
  55 /* Addresses to scan */
  56 static const unsigned short normal_i2c[] = { 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d,
  57                                                 0x2e, 0x2f, I2C_CLIENT_END };
  58 static unsigned short isa_address = 0x290;
  59
  60 /* Insmod parameters */
  61 I2C_CLIENT_INSMOD_4(w83781d, w83782d, w83783s, as99127f);
  62 I2C_CLIENT_MODULE_PARM(force_subclients, "List of subclient addresses: "
  63                     "{bus, clientaddr, subclientaddr1, subclientaddr2}");
  64
  65 static int reset;
  66 module_param(reset, bool, 0);
  67 MODULE_PARM_DESC(reset, "Set to one to reset chip on load");
  68
  69 static int init = 1;
  70 module_param(init, bool, 0);
  71 MODULE_PARM_DESC(init, "Set to zero to bypass chip initialization");
  72
  73 /* Constants specified below */
  74
  75 /* Length of ISA address segment */
  76 #define W83781D_EXTENT                  8
  77
  78 /* Where are the ISA address/data registers relative to the base address */
  79 #define W83781D_ADDR_REG_OFFSET         5
  80 #define W83781D_DATA_REG_OFFSET         6
  81
  82 /* The device registers */
  83 /* in nr from 0 to 8 */
  84 #define W83781D_REG_IN_MAX(nr)          ((nr < 7) ? (0x2b + (nr) * 2) : \
  85                                                     (0x554 + (((nr) - 7) * 2)))
  86 #define W83781D_REG_IN_MIN(nr)          ((nr < 7) ? (0x2c + (nr) * 2) : \
  87                                                     (0x555 + (((nr) - 7) * 2)))
  88 #define W83781D_REG_IN(nr)              ((nr < 7) ? (0x20 + (nr)) : \
  89                                                     (0x550 + (nr) - 7))
  90
  91 /* fan nr from 0 to 2 */
  92 #define W83781D_REG_FAN_MIN(nr)         (0x3b + (nr))
  93 #define W83781D_REG_FAN(nr)             (0x28 + (nr))
  94
  95 #define W83781D_REG_BANK                0x4E
  96 #define W83781D_REG_TEMP2_CONFIG        0x152
  97 #define W83781D_REG_TEMP3_CONFIG        0x252
  98 /* temp nr from 1 to 3 */
  99 #define W83781D_REG_TEMP(nr)            ((nr == 3) ? (0x0250) : \
 100                                         ((nr == 2) ? (0x0150) : \
 101                                                      (0x27)))
 102 #define W83781D_REG_TEMP_HYST(nr)       ((nr == 3) ? (0x253) : \
 103                                         ((nr == 2) ? (0x153) : \
 104                                                      (0x3A)))
 105 #define W83781D_REG_TEMP_OVER(nr)       ((nr == 3) ? (0x255) : \
 106                                         ((nr == 2) ? (0x155) : \
 107                                                      (0x39)))
 108
 109 #define W83781D_REG_CONFIG              0x40
 110
 111 /* Interrupt status (W83781D, AS99127F) */
 112 #define W83781D_REG_ALARM1              0x41
 113 #define W83781D_REG_ALARM2              0x42
 114
 115 /* Real-time status (W83782D, W83783S) */
 116 #define W83782D_REG_ALARM1              0x459
 117 #define W83782D_REG_ALARM2              0x45A
 118 #define W83782D_REG_ALARM3              0x45B
 119
 120 #define W83781D_REG_BEEP_CONFIG         0x4D
 121 #define W83781D_REG_BEEP_INTS1          0x56
 122 #define W83781D_REG_BEEP_INTS2          0x57
 123 #define W83781D_REG_BEEP_INTS3          0x453   /* not on W83781D */
 124
 125 #define W83781D_REG_VID_FANDIV          0x47
 126
 127 #define W83781D_REG_CHIPID              0x49
 128 #define W83781D_REG_WCHIPID             0x58
 129 #define W83781D_REG_CHIPMAN             0x4F
 130 #define W83781D_REG_PIN                 0x4B
 131
 132 /* 782D/783S only */
 133 #define W83781D_REG_VBAT                0x5D
 134
 135 /* PWM 782D (1-4) and 783S (1-2) only */
 136 static const u8 W83781D_REG_PWM[] = { 0x5B, 0x5A, 0x5E, 0x5F };
 137 #define W83781D_REG_PWMCLK12            0x5C
 138 #define W83781D_REG_PWMCLK34            0x45C
 139
 140 #define W83781D_REG_I2C_ADDR            0x48
 141 #define W83781D_REG_I2C_SUBADDR         0x4A
 142
 143 /* The following are undocumented in the data sheets however we
 144    received the information in an email from Winbond tech support */
 145 /* Sensor selection - not on 781d */
 146 #define W83781D_REG_SCFG1               0x5D
 147 static const u8 BIT_SCFG1[] = { 0x02, 0x04, 0x08 };
 148
 149 #define W83781D_REG_SCFG2               0x59
 150 static const u8 BIT_SCFG2[] = { 0x10, 0x20, 0x40 };
 151
 152 #define W83781D_DEFAULT_BETA            3435
 153
 154 /* Conversions */
 155 #define IN_TO_REG(val)                  SENSORS_LIMIT(((val) + 8) / 16, 0, 255)
 156 #define IN_FROM_REG(val)                ((val) * 16)
 157
 158 static inline u8
 159 FAN_TO_REG(long rpm, int div)
 160 {
 161         if (rpm == 0)
 162                 return 255;
 163         rpm = SENSORS_LIMIT(rpm, 1, 1000000);
 164         return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1, 254);
 165 }
 166
 167 static inline long
 168 FAN_FROM_REG(u8 val, int div)
 169 {
 170         if (val == 0)
 171                 return -1;
 172         if (val == 255)
 173                 return 0;
 174         return 1350000 / (val * div);
 175 }
 176
 177 #define TEMP_TO_REG(val)                SENSORS_LIMIT((val) / 1000, -127, 128)
 178 #define TEMP_FROM_REG(val)              ((val) * 1000)
 179
 180 #define BEEP_MASK_FROM_REG(val,type)    ((type) == as99127f ? \
 181                                          (val) ^ 0x7fff : (val))
 182 #define BEEP_MASK_TO_REG(val,type)      ((type) == as99127f ? \
 183                                          (~(val)) & 0x7fff : (val) & 0xffffff)
 184
 185 #define DIV_FROM_REG(val)               (1 << (val))
 186
 187 static inline u8
 188 DIV_TO_REG(long val, enum chips type)
 189 {
 190         int i;
 191         val = SENSORS_LIMIT(val, 1,
 192                             ((type == w83781d
 193                               || type == as99127f) ? 8 : 128)) >> 1;
 194         for (i = 0; i < 7; i++) {
 195                 if (val == 0)
 196                         break;
 197                 val >>= 1;
 198         }
 199         return i;
 200 }
 201
 202 /* There are some complications in a module like this. First off, W83781D chips
 203    may be both present on the SMBus and the ISA bus, and we have to handle
 204    those cases separately at some places. Second, there might be several
 205    W83781D chips available (well, actually, that is probably never done; but
 206    it is a clean illustration of how to handle a case like that). Finally,
 207    a specific chip may be attached to *both* ISA and SMBus, and we would
 208    not like to detect it double. Fortunately, in the case of the W83781D at
 209    least, a register tells us what SMBus address we are on, so that helps
 210    a bit - except if there could be more than one SMBus. Groan. No solution
 211    for this yet. */
 212
 213 /* For ISA chips, we abuse the i2c_client addr and name fields. We also use
 214    the driver field to differentiate between I2C and ISA chips. */
 215 struct w83781d_data {
 216         struct i2c_client client;
 217         struct device *hwmon_dev;
 218         struct mutex lock;
 219         enum chips type;
 220
 221         struct mutex update_lock;
 222         char valid;             /* !=0 if following fields are valid */
 223         unsigned long last_updated;     /* In jiffies */
 224
 225         struct i2c_client *lm75[2];     /* for secondary I2C addresses */
 226         /* array of 2 pointers to subclients */
 227
 228         u8 in[9];               /* Register value - 8 & 9 for 782D only */
 229         u8 in_max[9];           /* Register value - 8 & 9 for 782D only */
 230         u8 in_min[9];           /* Register value - 8 & 9 for 782D only */
 231         u8 fan[3];              /* Register value */
 232         u8 fan_min[3];          /* Register value */
 233         s8 temp;                /* Register value */
 234         s8 temp_max;            /* Register value */
 235         s8 temp_max_hyst;       /* Register value */
 236         u16 temp_add[2];        /* Register value */
 237         u16 temp_max_add[2];    /* Register value */
 238         u16 temp_max_hyst_add[2];       /* Register value */
 239         u8 fan_div[3];          /* Register encoding, shifted right */
 240         u8 vid;                 /* Register encoding, combined */
 241         u32 alarms;             /* Register encoding, combined */
 242         u32 beep_mask;          /* Register encoding, combined */
 243         u8 beep_enable;         /* Boolean */
 244         u8 pwm[4];              /* Register value */
 245         u8 pwm2_enable;         /* Boolean */
 246         u16 sens[3];            /* 782D/783S only.
 247                                    1 = pentium diode; 2 = 3904 diode;
 248                                    4 = thermistor */
 249         u8 vrm;
 250 };
 251
 252 static int w83781d_attach_adapter(struct i2c_adapter *adapter);
 253 static int w83781d_detect(struct i2c_adapter *adapter, int address, int kind);
 254 static int w83781d_detach_client(struct i2c_client *client);
 255
 256 static int __devinit w83781d_isa_probe(struct platform_device *pdev);
 257 static int __devexit w83781d_isa_remove(struct platform_device *pdev);
 258
 259 static int w83781d_read_value(struct w83781d_data *data, u16 reg);
 260 static int w83781d_write_value(struct w83781d_data *data, u16 reg, u16 value);
 261 static struct w83781d_data *w83781d_update_device(struct device *dev);
 262 static void w83781d_init_device(struct device *dev);
 263
 264 static struct i2c_driver w83781d_driver = {
 265         .driver = {
 266                 .name = "w83781d",
 267         },
 268         .attach_adapter = w83781d_attach_adapter,
 269         .detach_client = w83781d_detach_client,
 270 };
 271
 272 static struct platform_driver w83781d_isa_driver = {
 273         .driver = {
 274                 .owner = THIS_MODULE,
 275                 .name = "w83781d",
 276         },
 277         .probe = w83781d_isa_probe,
 278         .remove = w83781d_isa_remove,
 279 };
 280
 281
 282 /* following are the sysfs callback functions */
 283 #define show_in_reg(reg) \
 284 static ssize_t show_##reg (struct device *dev, struct device_attribute *da, \
 285                 char *buf) \
 286 { \
 287         struct sensor_device_attribute *attr = to_sensor_dev_attr(da); \
 288         struct w83781d_data *data = w83781d_update_device(dev); \
 289         return sprintf(buf, "%ld\n", \
 290                        (long)IN_FROM_REG(data->reg[attr->index])); \
 291 }
 292 show_in_reg(in);
 293 show_in_reg(in_min);
 294 show_in_reg(in_max);
 295
 296 #define store_in_reg(REG, reg) \
 297 static ssize_t store_in_##reg (struct device *dev, struct device_attribute \
 298                 *da, const char *buf, size_t count) \
 299 { \
 300         struct sensor_device_attribute *attr = to_sensor_dev_attr(da); \
 301         struct w83781d_data *data = dev_get_drvdata(dev); \
 302         int nr = attr->index; \
 303         u32 val; \
 304          \
 305         val = simple_strtoul(buf, NULL, 10); \
 306          \
 307         mutex_lock(&data->update_lock); \
 308         data->in_##reg[nr] = IN_TO_REG(val); \
 309         w83781d_write_value(data, W83781D_REG_IN_##REG(nr), data->in_##reg[nr]); \
 310          \
 311         mutex_unlock(&data->update_lock); \
 312         return count; \
 313 }
 314 store_in_reg(MIN, min);
 315 store_in_reg(MAX, max);
 316
 317 #define sysfs_in_offsets(offset) \
 318 static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO, \
 319                 show_in, NULL, offset); \
 320 static SENSOR_DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \
 321                 show_in_min, store_in_min, offset); \
 322 static SENSOR_DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \
 323                 show_in_max, store_in_max, offset)
 324
 325 sysfs_in_offsets(0);
 326 sysfs_in_offsets(1);
 327 sysfs_in_offsets(2);
 328 sysfs_in_offsets(3);
 329 sysfs_in_offsets(4);
 330 sysfs_in_offsets(5);
 331 sysfs_in_offsets(6);
 332 sysfs_in_offsets(7);
 333 sysfs_in_offsets(8);
 334
 335 #define show_fan_reg(reg) \
 336 static ssize_t show_##reg (struct device *dev, struct device_attribute *da, \
 337                 char *buf) \
 338 { \
 339         struct sensor_device_attribute *attr = to_sensor_dev_attr(da); \
 340         struct w83781d_data *data = w83781d_update_device(dev); \
 341         return sprintf(buf,"%ld\n", \
 342                 FAN_FROM_REG(data->reg[attr->index], \
 343                         DIV_FROM_REG(data->fan_div[attr->index]))); \
 344 }
 345 show_fan_reg(fan);
 346 show_fan_reg(fan_min);
 347
 348 static ssize_t
 349 store_fan_min(struct device *dev, struct device_attribute *da,
 350                 const char *buf, size_t count)
 351 {
 352         struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
 353         struct w83781d_data *data = dev_get_drvdata(dev);
 354         int nr = attr->index;
 355         u32 val;
 356
 357         val = simple_strtoul(buf, NULL, 10);
 358
 359         mutex_lock(&data->update_lock);
 360         data->fan_min[nr] =
 361             FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
 362         w83781d_write_value(data, W83781D_REG_FAN_MIN(nr),
 363                             data->fan_min[nr]);
 364
 365         mutex_unlock(&data->update_lock);
 366         return count;
 367 }
 368
 369 static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0);
 370 static SENSOR_DEVICE_ATTR(fan1_min, S_IRUGO | S_IWUSR,
 371                 show_fan_min, store_fan_min, 0);
 372 static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1);
 373 static SENSOR_DEVICE_ATTR(fan2_min, S_IRUGO | S_IWUSR,
 374                 show_fan_min, store_fan_min, 1);
 375 static SENSOR_DEVICE_ATTR(fan3_input, S_IRUGO, show_fan, NULL, 2);
 376 static SENSOR_DEVICE_ATTR(fan3_min, S_IRUGO | S_IWUSR,
 377                 show_fan_min, store_fan_min, 2);
 378
 379 #define show_temp_reg(reg) \
 380 static ssize_t show_##reg (struct device *dev, struct device_attribute *da, \
 381                 char *buf) \
 382 { \
 383         struct sensor_device_attribute *attr = to_sensor_dev_attr(da); \
 384         struct w83781d_data *data = w83781d_update_device(dev); \
 385         int nr = attr->index; \
 386         if (nr >= 2) {  /* TEMP2 and TEMP3 */ \
 387                 return sprintf(buf,"%d\n", \
 388                         LM75_TEMP_FROM_REG(data->reg##_add[nr-2])); \
 389         } else {        /* TEMP1 */ \
 390                 return sprintf(buf,"%ld\n", (long)TEMP_FROM_REG(data->reg)); \
 391         } \
 392 }
 393 show_temp_reg(temp);
 394 show_temp_reg(temp_max);
 395 show_temp_reg(temp_max_hyst);
 396
 397 #define store_temp_reg(REG, reg) \
 398 static ssize_t store_temp_##reg (struct device *dev, \
 399                 struct device_attribute *da, const char *buf, size_t count) \
 400 { \
 401         struct sensor_device_attribute *attr = to_sensor_dev_attr(da); \
 402         struct w83781d_data *data = dev_get_drvdata(dev); \
 403         int nr = attr->index; \
 404         long val; \
 405          \
 406         val = simple_strtol(buf, NULL, 10); \
 407          \
 408         mutex_lock(&data->update_lock); \
 409          \
 410         if (nr >= 2) {  /* TEMP2 and TEMP3 */ \
 411                 data->temp_##reg##_add[nr-2] = LM75_TEMP_TO_REG(val); \
 412                 w83781d_write_value(data, W83781D_REG_TEMP_##REG(nr), \
 413                                 data->temp_##reg##_add[nr-2]); \
 414         } else {        /* TEMP1 */ \
 415                 data->temp_##reg = TEMP_TO_REG(val); \
 416                 w83781d_write_value(data, W83781D_REG_TEMP_##REG(nr), \
 417                         data->temp_##reg); \
 418         } \
 419          \
 420         mutex_unlock(&data->update_lock); \
 421         return count; \
 422 }
 423 store_temp_reg(OVER, max);
 424 store_temp_reg(HYST, max_hyst);
 425
 426 #define sysfs_temp_offsets(offset) \
 427 static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, \
 428                 show_temp, NULL, offset); \
 429 static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \
 430                 show_temp_max, store_temp_max, offset); \
 431 static SENSOR_DEVICE_ATTR(temp##offset##_max_hyst, S_IRUGO | S_IWUSR, \
 432                 show_temp_max_hyst, store_temp_max_hyst, offset);
 433
 434 sysfs_temp_offsets(1);
 435 sysfs_temp_offsets(2);
 436 sysfs_temp_offsets(3);
 437
 438 static ssize_t
 439 show_vid_reg(struct device *dev, struct device_attribute *attr, char *buf)
 440 {
 441         struct w83781d_data *data = w83781d_update_device(dev);
 442         return sprintf(buf, "%ld\n", (long) vid_from_reg(data->vid, data->vrm));
 443 }
 444
 445 static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid_reg, NULL);
 446
 447 static ssize_t
 448 show_vrm_reg(struct device *dev, struct device_attribute *attr, char *buf)
 449 {
 450         struct w83781d_data *data = dev_get_drvdata(dev);
 451         return sprintf(buf, "%ld\n", (long) data->vrm);
 452 }
 453
 454 static ssize_t
 455 store_vrm_reg(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
 456 {
 457         struct w83781d_data *data = dev_get_drvdata(dev);
 458         u32 val;
 459
 460         val = simple_strtoul(buf, NULL, 10);
 461         data->vrm = val;
 462
 463         return count;
 464 }
 465
 466 static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm_reg, store_vrm_reg);
 467
 468 static ssize_t
 469 show_alarms_reg(struct device *dev, struct device_attribute *attr, char *buf)
 470 {
 471         struct w83781d_data *data = w83781d_update_device(dev);
 472         return sprintf(buf, "%u\n", data->alarms);
 473 }
 474
 475 static DEVICE_ATTR(alarms, S_IRUGO, show_alarms_reg, NULL);
 476
 477 static ssize_t show_alarm(struct device *dev, struct device_attribute *attr,
 478                 char *buf)
 479 {
 480         struct w83781d_data *data = w83781d_update_device(dev);
 481         int bitnr = to_sensor_dev_attr(attr)->index;
 482         return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1);
 483 }
 484
 485 /* The W83781D has a single alarm bit for temp2 and temp3 */
 486 static ssize_t show_temp3_alarm(struct device *dev,
 487                 struct device_attribute *attr, char *buf)
 488 {
 489         struct w83781d_data *data = w83781d_update_device(dev);
 490         int bitnr = (data->type == w83781d) ? 5 : 13;
 491         return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1);
 492 }
 493
 494 static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 0);
 495 static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 1);
 496 static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 2);
 497 static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 3);
 498 static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, 8);
 499 static SENSOR_DEVICE_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL, 9);
 500 static SENSOR_DEVICE_ATTR(in6_alarm, S_IRUGO, show_alarm, NULL, 10);
 501 static SENSOR_DEVICE_ATTR(in7_alarm, S_IRUGO, show_alarm, NULL, 16);
 502 static SENSOR_DEVICE_ATTR(in8_alarm, S_IRUGO, show_alarm, NULL, 17);
 503 static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, 6);
 504 static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 7);
 505 static SENSOR_DEVICE_ATTR(fan3_alarm, S_IRUGO, show_alarm, NULL, 11);
 506 static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 4);
 507 static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 5);
 508 static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_temp3_alarm, NULL, 0);
 509
 510 static ssize_t show_beep_mask (struct device *dev, struct device_attribute *attr, char *buf)
 511 {
 512         struct w83781d_data *data = w83781d_update_device(dev);
 513         return sprintf(buf, "%ld\n",
 514                        (long)BEEP_MASK_FROM_REG(data->beep_mask, data->type));
 515 }
 516 static ssize_t show_beep_enable (struct device *dev, struct device_attribute *attr, char *buf)
 517 {
 518         struct w83781d_data *data = w83781d_update_device(dev);
 519         return sprintf(buf, "%ld\n", (long)data->beep_enable);
 520 }
 521
 522 static ssize_t
 523 store_beep_mask(struct device *dev, struct device_attribute *attr,
 524                 const char *buf, size_t count)
 525 {
 526         struct w83781d_data *data = dev_get_drvdata(dev);
 527         u32 val;
 528
 529         val = simple_strtoul(buf, NULL, 10);
 530
 531         mutex_lock(&data->update_lock);
 532         data->beep_mask = BEEP_MASK_TO_REG(val, data->type);
 533         w83781d_write_value(data, W83781D_REG_BEEP_INTS1,
 534                             data->beep_mask & 0xff);
 535         w83781d_write_value(data, W83781D_REG_BEEP_INTS2,
 536                             ((data->beep_mask >> 8) & 0x7f)
 537                             | data->beep_enable << 7);
 538         if (data->type != w83781d && data->type != as99127f) {
 539                 w83781d_write_value(data, W83781D_REG_BEEP_INTS3,
 540                                     ((data->beep_mask) >> 16) & 0xff);
 541         }
 542         mutex_unlock(&data->update_lock);
 543
 544         return count;
 545 }
 546
 547 static ssize_t
 548 store_beep_enable(struct device *dev, struct device_attribute *attr,
 549                 const char *buf, size_t count)
 550 {
 551         struct w83781d_data *data = dev_get_drvdata(dev);
 552         u32 val;
 553
 554         val = simple_strtoul(buf, NULL, 10);
 555         if (val != 0 && val != 1)
 556                 return -EINVAL;
 557
 558         mutex_lock(&data->update_lock);
 559         data->beep_enable = val;
 560         val = w83781d_read_value(data, W83781D_REG_BEEP_INTS2) & 0x7f;
 561         val |= data->beep_enable << 7;
 562         w83781d_write_value(data, W83781D_REG_BEEP_INTS2, val);
 563         mutex_unlock(&data->update_lock);
 564
 565         return count;
 566 }
 567
 568 static DEVICE_ATTR(beep_mask, S_IRUGO | S_IWUSR,
 569                 show_beep_mask, store_beep_mask);
 570 static DEVICE_ATTR(beep_enable, S_IRUGO | S_IWUSR,
 571                 show_beep_enable, store_beep_enable);
 572
 573 static ssize_t show_beep(struct device *dev, struct device_attribute *attr,
 574                 char *buf)
 575 {
 576         struct w83781d_data *data = w83781d_update_device(dev);
 577         int bitnr = to_sensor_dev_attr(attr)->index;
 578         return sprintf(buf, "%u\n", (data->beep_mask >> bitnr) & 1);
 579 }
 580
 581 static ssize_t
 582 store_beep(struct device *dev, struct device_attribute *attr,
 583                 const char *buf, size_t count)
 584 {
 585         struct w83781d_data *data = dev_get_drvdata(dev);
 586         int bitnr = to_sensor_dev_attr(attr)->index;
 587         unsigned long bit;
 588         u8 reg;
 589
 590         bit = simple_strtoul(buf, NULL, 10);
 591         if (bit & ~1)
 592                 return -EINVAL;
 593
 594         mutex_lock(&data->update_lock);
 595         if (bit)
 596                 data->beep_mask |= (1 << bitnr);
 597         else
 598                 data->beep_mask &= ~(1 << bitnr);
 599
 600         if (bitnr < 8) {
 601                 reg = w83781d_read_value(data, W83781D_REG_BEEP_INTS1);
 602                 if (bit)
 603                         reg |= (1 << bitnr);
 604                 else
 605                         reg &= ~(1 << bitnr);
 606                 w83781d_write_value(data, W83781D_REG_BEEP_INTS1, reg);
 607         } else if (bitnr < 16) {
 608                 reg = w83781d_read_value(data, W83781D_REG_BEEP_INTS2);
 609                 if (bit)
 610                         reg |= (1 << (bitnr - 8));
 611                 else
 612                         reg &= ~(1 << (bitnr - 8));
 613                 w83781d_write_value(data, W83781D_REG_BEEP_INTS2, reg);
 614         } else {
 615                 reg = w83781d_read_value(data, W83781D_REG_BEEP_INTS3);
 616                 if (bit)
 617                         reg |= (1 << (bitnr - 16));
 618                 else
 619                         reg &= ~(1 << (bitnr - 16));
 620                 w83781d_write_value(data, W83781D_REG_BEEP_INTS3, reg);
 621         }
 622         mutex_unlock(&data->update_lock);
 623
 624         return count;
 625 }
 626
 627 /* The W83781D has a single beep bit for temp2 and temp3 */
 628 static ssize_t show_temp3_beep(struct device *dev,
 629                 struct device_attribute *attr, char *buf)
 630 {
 631         struct w83781d_data *data = w83781d_update_device(dev);
 632         int bitnr = (data->type == w83781d) ? 5 : 13;
 633         return sprintf(buf, "%u\n", (data->beep_mask >> bitnr) & 1);
 634 }
 635
 636 static SENSOR_DEVICE_ATTR(in0_beep, S_IRUGO | S_IWUSR,
 637                         show_beep, store_beep, 0);
 638 static SENSOR_DEVICE_ATTR(in1_beep, S_IRUGO | S_IWUSR,
 639                         show_beep, store_beep, 1);
 640 static SENSOR_DEVICE_ATTR(in2_beep, S_IRUGO | S_IWUSR,
 641                         show_beep, store_beep, 2);
 642 static SENSOR_DEVICE_ATTR(in3_beep, S_IRUGO | S_IWUSR,
 643                         show_beep, store_beep, 3);
 644 static SENSOR_DEVICE_ATTR(in4_beep, S_IRUGO | S_IWUSR,
 645                         show_beep, store_beep, 8);
 646 static SENSOR_DEVICE_ATTR(in5_beep, S_IRUGO | S_IWUSR,
 647                         show_beep, store_beep, 9);
 648 static SENSOR_DEVICE_ATTR(in6_beep, S_IRUGO | S_IWUSR,
 649                         show_beep, store_beep, 10);
 650 static SENSOR_DEVICE_ATTR(in7_beep, S_IRUGO | S_IWUSR,
 651                         show_beep, store_beep, 16);
 652 static SENSOR_DEVICE_ATTR(in8_beep, S_IRUGO | S_IWUSR,
 653                         show_beep, store_beep, 17);
 654 static SENSOR_DEVICE_ATTR(fan1_beep, S_IRUGO | S_IWUSR,
 655                         show_beep, store_beep, 6);
 656 static SENSOR_DEVICE_ATTR(fan2_beep, S_IRUGO | S_IWUSR,
 657                         show_beep, store_beep, 7);
 658 static SENSOR_DEVICE_ATTR(fan3_beep, S_IRUGO | S_IWUSR,
 659                         show_beep, store_beep, 11);
 660 static SENSOR_DEVICE_ATTR(temp1_beep, S_IRUGO | S_IWUSR,
 661                         show_beep, store_beep, 4);
 662 static SENSOR_DEVICE_ATTR(temp2_beep, S_IRUGO | S_IWUSR,
 663                         show_beep, store_beep, 5);
 664 static SENSOR_DEVICE_ATTR(temp3_beep, S_IRUGO,
 665                         show_temp3_beep, store_beep, 13);
 666
 667 static ssize_t
 668 show_fan_div(struct device *dev, struct device_attribute *da, char *buf)
 669 {
 670         struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
 671         struct w83781d_data *data = w83781d_update_device(dev);
 672         return sprintf(buf, "%ld\n",
 673                        (long) DIV_FROM_REG(data->fan_div[attr->index]));
 674 }
 675
 676 /* Note: we save and restore the fan minimum here, because its value is
 677    determined in part by the fan divisor.  This follows the principle of
 678    least surprise; the user doesn't expect the fan minimum to change just
 679    because the divisor changed. */
 680 static ssize_t
 681 store_fan_div(struct device *dev, struct device_attribute *da,
 682                 const char *buf, size_t count)
 683 {
 684         struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
 685         struct w83781d_data *data = dev_get_drvdata(dev);
 686         unsigned long min;
 687         int nr = attr->index;
 688         u8 reg;
 689         unsigned long val = simple_strtoul(buf, NULL, 10);
 690
 691         mutex_lock(&data->update_lock);
 692
 693         /* Save fan_min */
 694         min = FAN_FROM_REG(data->fan_min[nr],
 695                            DIV_FROM_REG(data->fan_div[nr]));
 696
 697         data->fan_div[nr] = DIV_TO_REG(val, data->type);
 698
 699         reg = (w83781d_read_value(data, nr==2 ? W83781D_REG_PIN : W83781D_REG_VID_FANDIV)
 700                & (nr==0 ? 0xcf : 0x3f))
 701             | ((data->fan_div[nr] & 0x03) << (nr==0 ? 4 : 6));
 702         w83781d_write_value(data, nr==2 ? W83781D_REG_PIN : W83781D_REG_VID_FANDIV, reg);
 703
 704         /* w83781d and as99127f don't have extended divisor bits */
 705         if (data->type != w83781d && data->type != as99127f) {
 706                 reg = (w83781d_read_value(data, W83781D_REG_VBAT)
 707                        & ~(1 << (5 + nr)))
 708                     | ((data->fan_div[nr] & 0x04) << (3 + nr));
 709                 w83781d_write_value(data, W83781D_REG_VBAT, reg);
 710         }
 711
 712         /* Restore fan_min */
 713         data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
 714         w83781d_write_value(data, W83781D_REG_FAN_MIN(nr), data->fan_min[nr]);
 715
 716         mutex_unlock(&data->update_lock);
 717         return count;
 718 }
 719
 720 static SENSOR_DEVICE_ATTR(fan1_div, S_IRUGO | S_IWUSR,
 721                 show_fan_div, store_fan_div, 0);
 722 static SENSOR_DEVICE_ATTR(fan2_div, S_IRUGO | S_IWUSR,
 723                 show_fan_div, store_fan_div, 1);
 724 static SENSOR_DEVICE_ATTR(fan3_div, S_IRUGO | S_IWUSR,
 725                 show_fan_div, store_fan_div, 2);
 726
 727 static ssize_t
 728 show_pwm(struct device *dev, struct device_attribute *da, char *buf)
 729 {
 730         struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
 731         struct w83781d_data *data = w83781d_update_device(dev);
 732         return sprintf(buf, "%d\n", (int)data->pwm[attr->index]);
 733 }
 734
 735 static ssize_t
 736 show_pwm2_enable(struct device *dev, struct device_attribute *da, char *buf)
 737 {
 738         struct w83781d_data *data = w83781d_update_device(dev);
 739         return sprintf(buf, "%d\n", (int)data->pwm2_enable);
 740 }
 741
 742 static ssize_t
 743 store_pwm(struct device *dev, struct device_attribute *da, const char *buf,
 744                 size_t count)
 745 {
 746         struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
 747         struct w83781d_data *data = dev_get_drvdata(dev);
 748         int nr = attr->index;
 749         u32 val;
 750
 751         val = simple_strtoul(buf, NULL, 10);
 752
 753         mutex_lock(&data->update_lock);
 754         data->pwm[nr] = SENSORS_LIMIT(val, 0, 255);
 755         w83781d_write_value(data, W83781D_REG_PWM[nr], data->pwm[nr]);
 756         mutex_unlock(&data->update_lock);
 757         return count;
 758 }
 759
 760 static ssize_t
 761 store_pwm2_enable(struct device *dev, struct device_attribute *da,
 762                 const char *buf, size_t count)
 763 {
 764         struct w83781d_data *data = dev_get_drvdata(dev);
 765         u32 val, reg;
 766
 767         val = simple_strtoul(buf, NULL, 10);
 768
 769         mutex_lock(&data->update_lock);
 770
 771         switch (val) {
 772         case 0:
 773         case 1:
 774                 reg = w83781d_read_value(data, W83781D_REG_PWMCLK12);
 775                 w83781d_write_value(data, W83781D_REG_PWMCLK12,
 776                                     (reg & 0xf7) | (val << 3));
 777
 778                 reg = w83781d_read_value(data, W83781D_REG_BEEP_CONFIG);
 779                 w83781d_write_value(data, W83781D_REG_BEEP_CONFIG,
 780                                     (reg & 0xef) | (!val << 4));
 781
 782                 data->pwm2_enable = val;
 783                 break;
 784
 785         default:
 786                 mutex_unlock(&data->update_lock);
 787                 return -EINVAL;
 788         }
 789
 790         mutex_unlock(&data->update_lock);
 791         return count;
 792 }
 793
 794 static SENSOR_DEVICE_ATTR(pwm1, S_IRUGO | S_IWUSR, show_pwm, store_pwm, 0);
 795 static SENSOR_DEVICE_ATTR(pwm2, S_IRUGO | S_IWUSR, show_pwm, store_pwm, 1);
 796 static SENSOR_DEVICE_ATTR(pwm3, S_IRUGO | S_IWUSR, show_pwm, store_pwm, 2);
 797 static SENSOR_DEVICE_ATTR(pwm4, S_IRUGO | S_IWUSR, show_pwm, store_pwm, 3);
 798 /* only PWM2 can be enabled/disabled */
 799 static DEVICE_ATTR(pwm2_enable, S_IRUGO | S_IWUSR,
 800                 show_pwm2_enable, store_pwm2_enable);
 801
 802 static ssize_t
 803 show_sensor(struct device *dev, struct device_attribute *da, char *buf)
 804 {
 805         struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
 806         struct w83781d_data *data = w83781d_update_device(dev);
 807         return sprintf(buf, "%d\n", (int)data->sens[attr->index]);
 808 }
 809
 810 static ssize_t
 811 store_sensor(struct device *dev, struct device_attribute *da,
 812                 const char *buf, size_t count)
 813 {
 814         struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
 815         struct w83781d_data *data = dev_get_drvdata(dev);
 816         int nr = attr->index;
 817         u32 val, tmp;
 818
 819         val = simple_strtoul(buf, NULL, 10);
 820
 821         mutex_lock(&data->update_lock);
 822
 823         switch (val) {
 824         case 1:         /* PII/Celeron diode */
 825                 tmp = w83781d_read_value(data, W83781D_REG_SCFG1);
 826                 w83781d_write_value(data, W83781D_REG_SCFG1,
 827                                     tmp | BIT_SCFG1[nr]);
 828                 tmp = w83781d_read_value(data, W83781D_REG_SCFG2);
 829                 w83781d_write_value(data, W83781D_REG_SCFG2,
 830                                     tmp | BIT_SCFG2[nr]);
 831                 data->sens[nr] = val;
 832                 break;
 833         case 2:         /* 3904 */
 834                 tmp = w83781d_read_value(data, W83781D_REG_SCFG1);
 835                 w83781d_write_value(data, W83781D_REG_SCFG1,
 836                                     tmp | BIT_SCFG1[nr]);
 837                 tmp = w83781d_read_value(data, W83781D_REG_SCFG2);
 838                 w83781d_write_value(data, W83781D_REG_SCFG2,
 839                                     tmp & ~BIT_SCFG2[nr]);
 840                 data->sens[nr] = val;
 841                 break;
 842         case W83781D_DEFAULT_BETA:
 843                 dev_warn(dev, "Sensor type %d is deprecated, please use 4 "
 844                          "instead\n", W83781D_DEFAULT_BETA);
 845                 /* fall through */
 846         case 4:         /* thermistor */
 847                 tmp = w83781d_read_value(data, W83781D_REG_SCFG1);
 848                 w83781d_write_value(data, W83781D_REG_SCFG1,
 849                                     tmp & ~BIT_SCFG1[nr]);
 850                 data->sens[nr] = val;
 851                 break;
 852         default:
 853                 dev_err(dev, "Invalid sensor type %ld; must be 1, 2, or 4\n",
 854                        (long) val);
 855                 break;
 856         }
 857
 858         mutex_unlock(&data->update_lock);
 859         return count;
 860 }
 861
 862 static SENSOR_DEVICE_ATTR(temp1_type, S_IRUGO | S_IWUSR,
 863         show_sensor, store_sensor, 0);
 864 static SENSOR_DEVICE_ATTR(temp2_type, S_IRUGO | S_IWUSR,
 865         show_sensor, store_sensor, 1);
 866 static SENSOR_DEVICE_ATTR(temp3_type, S_IRUGO | S_IWUSR,
 867         show_sensor, store_sensor, 2);
 868
 869 /* I2C devices get this name attribute automatically, but for ISA devices
 870    we must create it by ourselves. */
 871 static ssize_t
 872 show_name(struct device *dev, struct device_attribute *devattr, char *buf)
 873 {
 874         struct w83781d_data *data = dev_get_drvdata(dev);
 875         return sprintf(buf, "%s\n", data->client.name);
 876 }
 877 static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
 878
 879 /* This function is called when:
 880      * w83781d_driver is inserted (when this module is loaded), for each
 881        available adapter
 882      * when a new adapter is inserted (and w83781d_driver is still present) */
 883 static int
 884 w83781d_attach_adapter(struct i2c_adapter *adapter)
 885 {
 886         if (!(adapter->class & I2C_CLASS_HWMON))
 887                 return 0;
 888         return i2c_probe(adapter, &addr_data, w83781d_detect);
 889 }
 890
 891 /* Assumes that adapter is of I2C, not ISA variety.
 892  * OTHERWISE DON'T CALL THIS
 893  */
 894 static int
 895 w83781d_detect_subclients(struct i2c_adapter *adapter, int address, int kind,
 896                 struct i2c_client *new_client)
 897 {
 898         int i, val1 = 0, id;
 899         int err;
 900         const char *client_name = "";
 901         struct w83781d_data *data = i2c_get_clientdata(new_client);
 902
 903         data->lm75[0] = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
 904         if (!(data->lm75[0])) {
 905                 err = -ENOMEM;
 906                 goto ERROR_SC_0;
 907         }
 908
 909         id = i2c_adapter_id(adapter);
 910
 911         if (force_subclients[0] == id && force_subclients[1] == address) {
 912                 for (i = 2; i <= 3; i++) {
 913                         if (force_subclients[i] < 0x48 ||
 914                             force_subclients[i] > 0x4f) {
 915                                 dev_err(&new_client->dev, "Invalid subclient "
 916                                         "address %d; must be 0x48-0x4f\n",
 917                                         force_subclients[i]);
 918                                 err = -EINVAL;
 919                                 goto ERROR_SC_1;
 920                         }
 921                 }
 922                 w83781d_write_value(data, W83781D_REG_I2C_SUBADDR,
 923                                 (force_subclients[2] & 0x07) |
 924                                 ((force_subclients[3] & 0x07) << 4));
 925                 data->lm75[0]->addr = force_subclients[2];
 926         } else {
 927                 val1 = w83781d_read_value(data, W83781D_REG_I2C_SUBADDR);
 928                 data->lm75[0]->addr = 0x48 + (val1 & 0x07);
 929         }
 930
 931         if (kind != w83783s) {
 932                 data->lm75[1] = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
 933                 if (!(data->lm75[1])) {
 934                         err = -ENOMEM;
 935                         goto ERROR_SC_1;
 936                 }
 937
 938                 if (force_subclients[0] == id &&
 939                     force_subclients[1] == address) {
 940                         data->lm75[1]->addr = force_subclients[3];
 941                 } else {
 942                         data->lm75[1]->addr = 0x48 + ((val1 >> 4) & 0x07);
 943                 }
 944                 if (data->lm75[0]->addr == data->lm75[1]->addr) {
 945                         dev_err(&new_client->dev,
 946                                "Duplicate addresses 0x%x for subclients.\n",
 947                                data->lm75[0]->addr);
 948                         err = -EBUSY;
 949                         goto ERROR_SC_2;
 950                 }
 951         }
 952
 953         if (kind == w83781d)
 954                 client_name = "w83781d subclient";
 955         else if (kind == w83782d)
 956                 client_name = "w83782d subclient";
 957         else if (kind == w83783s)
 958                 client_name = "w83783s subclient";
 959         else if (kind == as99127f)
 960                 client_name = "as99127f subclient";
 961
 962         for (i = 0; i <= 1; i++) {
 963                 /* store all data in w83781d */
 964                 i2c_set_clientdata(data->lm75[i], NULL);
 965                 data->lm75[i]->adapter = adapter;
 966                 data->lm75[i]->driver = &w83781d_driver;
 967                 data->lm75[i]->flags = 0;
 968                 strlcpy(data->lm75[i]->name, client_name,
 969                         I2C_NAME_SIZE);
 970                 if ((err = i2c_attach_client(data->lm75[i]))) {
 971                         dev_err(&new_client->dev, "Subclient %d "
 972                                 "registration at address 0x%x "
 973                                 "failed.\n", i, data->lm75[i]->addr);
 974                         if (i == 1)
 975                                 goto ERROR_SC_3;
 976                         goto ERROR_SC_2;
 977                 }
 978                 if (kind == w83783s)
 979                         break;
 980         }
 981
 982         return 0;
 983
 984 /* Undo inits in case of errors */
 985 ERROR_SC_3:
 986         i2c_detach_client(data->lm75[0]);
 987 ERROR_SC_2:
 988         kfree(data->lm75[1]);
 989 ERROR_SC_1:
 990         kfree(data->lm75[0]);
 991 ERROR_SC_0:
 992         return err;
 993 }
 994
 995 #define IN_UNIT_ATTRS(X)                                        \
 996         &sensor_dev_attr_in##X##_input.dev_attr.attr,           \
 997         &sensor_dev_attr_in##X##_min.dev_attr.attr,             \
 998         &sensor_dev_attr_in##X##_max.dev_attr.attr,             \
 999         &sensor_dev_attr_in##X##_alarm.dev_attr.attr,           \
1000         &sensor_dev_attr_in##X##_beep.dev_attr.attr
1001
1002 #define FAN_UNIT_ATTRS(X)                                       \
1003         &sensor_dev_attr_fan##X##_input.dev_attr.attr,          \
1004         &sensor_dev_attr_fan##X##_min.dev_attr.attr,            \
1005         &sensor_dev_attr_fan##X##_div.dev_attr.attr,            \
1006         &sensor_dev_attr_fan##X##_alarm.dev_attr.attr,          \
1007         &sensor_dev_attr_fan##X##_beep.dev_attr.attr
1008
1009 #define TEMP_UNIT_ATTRS(X)                                      \
1010         &sensor_dev_attr_temp##X##_input.dev_attr.attr,         \
1011         &sensor_dev_attr_temp##X##_max.dev_attr.attr,           \
1012         &sensor_dev_attr_temp##X##_max_hyst.dev_attr.attr,      \
1013         &sensor_dev_attr_temp##X##_alarm.dev_attr.attr,         \
1014         &sensor_dev_attr_temp##X##_beep.dev_attr.attr
1015
1016 static struct attribute* w83781d_attributes[] = {
1017         IN_UNIT_ATTRS(0),
1018         IN_UNIT_ATTRS(2),
1019         IN_UNIT_ATTRS(3),
1020         IN_UNIT_ATTRS(4),
1021         IN_UNIT_ATTRS(5),
1022         IN_UNIT_ATTRS(6),
1023         FAN_UNIT_ATTRS(1),
1024         FAN_UNIT_ATTRS(2),
1025         FAN_UNIT_ATTRS(3),
1026         TEMP_UNIT_ATTRS(1),
1027         TEMP_UNIT_ATTRS(2),
1028         &dev_attr_cpu0_vid.attr,
1029         &dev_attr_vrm.attr,
1030         &dev_attr_alarms.attr,
1031         &dev_attr_beep_mask.attr,
1032         &dev_attr_beep_enable.attr,
1033         NULL
1034 };
1035 static const struct attribute_group w83781d_group = {
1036         .attrs = w83781d_attributes,
1037 };
1038
1039 static struct attribute *w83781d_attributes_opt[] = {
1040         IN_UNIT_ATTRS(1),
1041         IN_UNIT_ATTRS(7),
1042         IN_UNIT_ATTRS(8),
1043         TEMP_UNIT_ATTRS(3),
1044         &sensor_dev_attr_pwm1.dev_attr.attr,
1045         &sensor_dev_attr_pwm2.dev_attr.attr,
1046         &sensor_dev_attr_pwm3.dev_attr.attr,
1047         &sensor_dev_attr_pwm4.dev_attr.attr,
1048         &dev_attr_pwm2_enable.attr,
1049         &sensor_dev_attr_temp1_type.dev_attr.attr,
1050         &sensor_dev_attr_temp2_type.dev_attr.attr,
1051         &sensor_dev_attr_temp3_type.dev_attr.attr,
1052         NULL
1053 };
1054 static const struct attribute_group w83781d_group_opt = {
1055         .attrs = w83781d_attributes_opt,
1056 };
1057
1058 /* No clean up is done on error, it's up to the caller */
1059 static int
1060 w83781d_create_files(struct device *dev, int kind, int is_isa)
1061 {
1062         int err;
1063
1064         if ((err = sysfs_create_group(&dev->kobj, &w83781d_group)))
1065                 return err;
1066
1067         if (kind != w83783s) {
1068                 if ((err = device_create_file(dev,
1069                                 &sensor_dev_attr_in1_input.dev_attr))
1070                     || (err = device_create_file(dev,
1071                                 &sensor_dev_attr_in1_min.dev_attr))
1072                     || (err = device_create_file(dev,
1073                                 &sensor_dev_attr_in1_max.dev_attr))
1074                     || (err = device_create_file(dev,
1075                                 &sensor_dev_attr_in1_alarm.dev_attr))
1076                     || (err = device_create_file(dev,
1077                                 &sensor_dev_attr_in1_beep.dev_attr)))
1078                         return err;
1079         }
1080         if (kind != as99127f && kind != w83781d && kind != w83783s) {
1081                 if ((err = device_create_file(dev,
1082                                 &sensor_dev_attr_in7_input.dev_attr))
1083                     || (err = device_create_file(dev,
1084                                 &sensor_dev_attr_in7_min.dev_attr))
1085                     || (err = device_create_file(dev,
1086                                 &sensor_dev_attr_in7_max.dev_attr))
1087                     || (err = device_create_file(dev,
1088                                 &sensor_dev_attr_in7_alarm.dev_attr))
1089                     || (err = device_create_file(dev,
1090                                 &sensor_dev_attr_in7_beep.dev_attr))
1091                     || (err = device_create_file(dev,
1092                                 &sensor_dev_attr_in8_input.dev_attr))
1093                     || (err = device_create_file(dev,
1094                                 &sensor_dev_attr_in8_min.dev_attr))
1095                     || (err = device_create_file(dev,
1096                                 &sensor_dev_attr_in8_max.dev_attr))
1097                     || (err = device_create_file(dev,
1098                                 &sensor_dev_attr_in8_alarm.dev_attr))
1099                     || (err = device_create_file(dev,
1100                                 &sensor_dev_attr_in8_beep.dev_attr)))
1101                         return err;
1102         }
1103         if (kind != w83783s) {
1104                 if ((err = device_create_file(dev,
1105                                 &sensor_dev_attr_temp3_input.dev_attr))
1106                     || (err = device_create_file(dev,
1107                                 &sensor_dev_attr_temp3_max.dev_attr))
1108                     || (err = device_create_file(dev,
1109                                 &sensor_dev_attr_temp3_max_hyst.dev_attr))
1110                     || (err = device_create_file(dev,
1111                                 &sensor_dev_attr_temp3_alarm.dev_attr))
1112                     || (err = device_create_file(dev,
1113                                 &sensor_dev_attr_temp3_beep.dev_attr)))
1114                         return err;
1115
1116                 if (kind != w83781d) {
1117                         err = sysfs_chmod_file(&dev->kobj,
1118                                 &sensor_dev_attr_temp3_alarm.dev_attr.attr,
1119                                 S_IRUGO | S_IWUSR);
1120                         if (err)
1121                                 return err;
1122                 }
1123         }
1124
1125         if (kind != w83781d && kind != as99127f) {
1126                 if ((err = device_create_file(dev,
1127                                 &sensor_dev_attr_pwm1.dev_attr))
1128                     || (err = device_create_file(dev,
1129                                 &sensor_dev_attr_pwm2.dev_attr))
1130                     || (err = device_create_file(dev, &dev_attr_pwm2_enable)))
1131                         return err;
1132         }
1133         if (kind == w83782d && !is_isa) {
1134                 if ((err = device_create_file(dev,
1135                                 &sensor_dev_attr_pwm3.dev_attr))
1136                     || (err = device_create_file(dev,
1137                                 &sensor_dev_attr_pwm4.dev_attr)))
1138                         return err;
1139         }
1140
1141         if (kind != as99127f && kind != w83781d) {
1142                 if ((err = device_create_file(dev,
1143                                 &sensor_dev_attr_temp1_type.dev_attr))
1144                     || (err = device_create_file(dev,
1145                                 &sensor_dev_attr_temp2_type.dev_attr)))
1146                         return err;
1147                 if (kind != w83783s) {
1148                         if ((err = device_create_file(dev,
1149                                         &sensor_dev_attr_temp3_type.dev_attr)))
1150                                 return err;
1151                 }
1152         }
1153
1154         if (is_isa) {
1155                 err = device_create_file(&pdev->dev, &dev_attr_name);
1156                 if (err)
1157                         return err;
1158         }
1159
1160         return 0;
1161 }
1162
1163 static int
1164 w83781d_detect(struct i2c_adapter *adapter, int address, int kind)
1165 {
1166         int val1 = 0, val2;
1167         struct i2c_client *client;
1168         struct device *dev;
1169         struct w83781d_data *data;
1170         int err;
1171         const char *client_name = "";
1172         enum vendor { winbond, asus } vendid;
1173
1174         if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
1175                 err = -EINVAL;
1176                 goto ERROR1;
1177         }
1178
1179         /* OK. For now, we presume we have a valid client. We now create the
1180            client structure, even though we cannot fill it completely yet.
1181            But it allows us to access w83781d_{read,write}_value. */
1182
1183         if (!(data = kzalloc(sizeof(struct w83781d_data), GFP_KERNEL))) {
1184                 err = -ENOMEM;
1185                 goto ERROR1;
1186         }
1187
1188         client = &data->client;
1189         i2c_set_clientdata(client, data);
1190         client->addr = address;
1191         mutex_init(&data->lock);
1192         client->adapter = adapter;
1193         client->driver = &w83781d_driver;
1194         dev = &client->dev;
1195
1196         /* Now, we do the remaining detection. */
1197
1198         /* The w8378?d may be stuck in some other bank than bank 0. This may
1199            make reading other information impossible. Specify a force=... or
1200            force_*=... parameter, and the Winbond will be reset to the right
1201            bank. */
1202         if (kind < 0) {
1203                 if (w83781d_read_value(data, W83781D_REG_CONFIG) & 0x80) {
1204                         dev_dbg(&adapter->dev, "Detection of w83781d chip "
1205                                 "failed at step 3\n");
1206                         err = -ENODEV;
1207                         goto ERROR2;
1208                 }
1209                 val1 = w83781d_read_value(data, W83781D_REG_BANK);
1210                 val2 = w83781d_read_value(data, W83781D_REG_CHIPMAN);
1211                 /* Check for Winbond or Asus ID if in bank 0 */
1212                 if ((!(val1 & 0x07)) &&
1213                     (((!(val1 & 0x80)) && (val2 != 0xa3) && (val2 != 0xc3))
1214                      || ((val1 & 0x80) && (val2 != 0x5c) && (val2 != 0x12)))) {
1215                         dev_dbg(&adapter->dev, "Detection of w83781d chip "
1216                                 "failed at step 4\n");
1217                         err = -ENODEV;
1218                         goto ERROR2;
1219                 }
1220                 /* If Winbond SMBus, check address at 0x48.
1221                    Asus doesn't support, except for as99127f rev.2 */
1222                 if ((!(val1 & 0x80) && (val2 == 0xa3)) ||
1223                     ((val1 & 0x80) && (val2 == 0x5c))) {
1224                         if (w83781d_read_value
1225                             (data, W83781D_REG_I2C_ADDR) != address) {
1226                                 dev_dbg(&adapter->dev, "Detection of w83781d "
1227                                         "chip failed at step 5\n");
1228                                 err = -ENODEV;
1229                                 goto ERROR2;
1230                         }
1231                 }
1232         }
1233
1234         /* We have either had a force parameter, or we have already detected the
1235            Winbond. Put it now into bank 0 and Vendor ID High Byte */
1236         w83781d_write_value(data, W83781D_REG_BANK,
1237                             (w83781d_read_value(data, W83781D_REG_BANK)
1238                              & 0x78) | 0x80);
1239
1240         /* Determine the chip type. */
1241         if (kind <= 0) {
1242                 /* get vendor ID */
1243                 val2 = w83781d_read_value(data, W83781D_REG_CHIPMAN);
1244                 if (val2 == 0x5c)
1245                         vendid = winbond;
1246                 else if (val2 == 0x12)
1247                         vendid = asus;
1248                 else {
1249                         dev_dbg(&adapter->dev, "w83781d chip vendor is "
1250                                 "neither Winbond nor Asus\n");
1251                         err = -ENODEV;
1252                         goto ERROR2;
1253                 }
1254
1255                 val1 = w83781d_read_value(data, W83781D_REG_WCHIPID);
1256                 if ((val1 == 0x10 || val1 == 0x11) && vendid == winbond)
1257                         kind = w83781d;
1258                 else if (val1 == 0x30 && vendid == winbond)
1259                         kind = w83782d;
1260                 else if (val1 == 0x40 && vendid == winbond && address == 0x2d)
1261                         kind = w83783s;
1262                 else if (val1 == 0x31)
1263                         kind = as99127f;
1264                 else {
1265                         if (kind == 0)
1266                                 dev_warn(&adapter->dev, "Ignoring 'force' "
1267                                          "parameter for unknown chip at "
1268                                          "address 0x%02x\n", address);
1269                         err = -EINVAL;
1270                         goto ERROR2;
1271                 }
1272         }
1273
1274         if (kind == w83781d) {
1275                 client_name = "w83781d";
1276         } else if (kind == w83782d) {
1277                 client_name = "w83782d";
1278         } else if (kind == w83783s) {
1279                 client_name = "w83783s";
1280         } else if (kind == as99127f) {
1281                 client_name = "as99127f";
1282         }
1283
1284         /* Fill in the remaining client fields and put into the global list */
1285         strlcpy(client->name, client_name, I2C_NAME_SIZE);
1286         data->type = kind;
1287
1288         /* Tell the I2C layer a new client has arrived */
1289         if ((err = i2c_attach_client(client)))
1290                 goto ERROR2;
1291
1292         /* attach secondary i2c lm75-like clients */
1293         if ((err = w83781d_detect_subclients(adapter, address,
1294                         kind, client)))
1295                 goto ERROR3;
1296
1297         /* Initialize the chip */
1298         w83781d_init_device(dev);
1299
1300         /* Register sysfs hooks */
1301         err = w83781d_create_files(dev, kind, 0);
1302         if (err)
1303                 goto ERROR4;
1304
1305         data->hwmon_dev = hwmon_device_register(dev);
1306         if (IS_ERR(data->hwmon_dev)) {
1307                 err = PTR_ERR(data->hwmon_dev);
1308                 goto ERROR4;
1309         }
1310
1311         return 0;
1312
1313 ERROR4:
1314         sysfs_remove_group(&dev->kobj, &w83781d_group);
1315         sysfs_remove_group(&dev->kobj, &w83781d_group_opt);
1316
1317         if (data->lm75[1]) {
1318                 i2c_detach_client(data->lm75[1]);
1319                 kfree(data->lm75[1]);
1320         }
1321         if (data->lm75[0]) {
1322                 i2c_detach_client(data->lm75[0]);
1323                 kfree(data->lm75[0]);
1324         }
1325 ERROR3:
1326         i2c_detach_client(client);
1327 ERROR2:
1328         kfree(data);
1329 ERROR1:
1330         return err;
1331 }
1332
1333 static int
1334 w83781d_detach_client(struct i2c_client *client)
1335 {
1336         struct w83781d_data *data = i2c_get_clientdata(client);
1337         int err;
1338
1339         /* main client */
1340         if (data) {
1341                 hwmon_device_unregister(data->hwmon_dev);
1342                 sysfs_remove_group(&client->dev.kobj, &w83781d_group);
1343                 sysfs_remove_group(&client->dev.kobj, &w83781d_group_opt);
1344         }
1345
1346         if ((err = i2c_detach_client(client)))
1347                 return err;
1348
1349         /* main client */
1350         if (data)
1351                 kfree(data);
1352
1353         /* subclient */
1354         else
1355                 kfree(client);
1356
1357         return 0;
1358 }
1359
1360 static int __devinit
1361 w83781d_isa_probe(struct platform_device *pdev)
1362 {
1363         int err, reg;
1364         struct w83781d_data *data;
1365         struct resource *res;
1366         const char *name;
1367
1368         /* Reserve the ISA region */
1369         res = platform_get_resource(pdev, IORESOURCE_IO, 0);
1370         if (!request_region(res->start + W83781D_ADDR_REG_OFFSET, 2,
1371                             "w83781d")) {
1372                 err = -EBUSY;
1373                 goto exit;
1374         }
1375
1376         if (!(data = kzalloc(sizeof(struct w83781d_data), GFP_KERNEL))) {
1377                 err = -ENOMEM;
1378                 goto exit_release_region;
1379         }
1380         mutex_init(&data->lock);
1381         data->client.addr = res->start;
1382         i2c_set_clientdata(&data->client, data);
1383         platform_set_drvdata(pdev, data);
1384
1385         reg = w83781d_read_value(data, W83781D_REG_WCHIPID);
1386         switch (reg) {
1387         case 0x30:
1388                 data->type = w83782d;
1389                 name = "w83782d";
1390                 break;
1391         default:
1392                 data->type = w83781d;
1393                 name = "w83781d";
1394         }
1395         strlcpy(data->client.name, name, I2C_NAME_SIZE);
1396
1397         /* Initialize the W83781D chip */
1398         w83781d_init_device(&pdev->dev);
1399
1400         /* Register sysfs hooks */
1401         err = w83781d_create_files(&pdev->dev, data->type, 1);
1402         if (err)
1403                 goto exit_remove_files;
1404
1405         data->hwmon_dev = hwmon_device_register(&pdev->dev);
1406         if (IS_ERR(data->hwmon_dev)) {
1407                 err = PTR_ERR(data->hwmon_dev);
1408                 goto exit_remove_files;
1409         }
1410
1411         return 0;
1412
1413  exit_remove_files:
1414         sysfs_remove_group(&pdev->dev.kobj, &w83781d_group);
1415         sysfs_remove_group(&pdev->dev.kobj, &w83781d_group_opt);
1416         device_remove_file(&pdev->dev, &dev_attr_name);
1417         kfree(data);
1418  exit_release_region:
1419         release_region(res->start + W83781D_ADDR_REG_OFFSET, 2);
1420  exit:
1421         return err;
1422 }
1423
1424 static int __devexit
1425 w83781d_isa_remove(struct platform_device *pdev)
1426 {
1427         struct w83781d_data *data = platform_get_drvdata(pdev);
1428
1429         hwmon_device_unregister(data->hwmon_dev);
1430         sysfs_remove_group(&pdev->dev.kobj, &w83781d_group);
1431         sysfs_remove_group(&pdev->dev.kobj, &w83781d_group_opt);
1432         device_remove_file(&pdev->dev, &dev_attr_name);
1433         release_region(data->client.addr + W83781D_ADDR_REG_OFFSET, 2);
1434         kfree(data);
1435
1436         return 0;
1437 }
1438
1439 /* The SMBus locks itself, usually, but nothing may access the Winbond between
1440    bank switches. ISA access must always be locked explicitly!
1441    We ignore the W83781D BUSY flag at this moment - it could lead to deadlocks,
1442    would slow down the W83781D access and should not be necessary.
1443    There are some ugly typecasts here, but the good news is - they should
1444    nowhere else be necessary! */
1445 static int
1446 w83781d_read_value(struct w83781d_data *data, u16 reg)
1447 {
1448         struct i2c_client *client = &data->client;
1449         int res, word_sized, bank;
1450         struct i2c_client *cl;
1451
1452         mutex_lock(&data->lock);
1453         if (!client->driver) { /* ISA device */
1454                 word_sized = (((reg & 0xff00) == 0x100)
1455                               || ((reg & 0xff00) == 0x200))
1456                     && (((reg & 0x00ff) == 0x50)
1457                         || ((reg & 0x00ff) == 0x53)
1458                         || ((reg & 0x00ff) == 0x55));
1459                 if (reg & 0xff00) {
1460                         outb_p(W83781D_REG_BANK,
1461                                client->addr + W83781D_ADDR_REG_OFFSET);
1462                         outb_p(reg >> 8,
1463                                client->addr + W83781D_DATA_REG_OFFSET);
1464                 }
1465                 outb_p(reg & 0xff, client->addr + W83781D_ADDR_REG_OFFSET);
1466                 res = inb_p(client->addr + W83781D_DATA_REG_OFFSET);
1467                 if (word_sized) {
1468                         outb_p((reg & 0xff) + 1,
1469                                client->addr + W83781D_ADDR_REG_OFFSET);
1470                         res =
1471                             (res << 8) + inb_p(client->addr +
1472                                                W83781D_DATA_REG_OFFSET);
1473                 }
1474                 if (reg & 0xff00) {
1475                         outb_p(W83781D_REG_BANK,
1476                                client->addr + W83781D_ADDR_REG_OFFSET);
1477                         outb_p(0, client->addr + W83781D_DATA_REG_OFFSET);
1478                 }
1479         } else {
1480                 bank = (reg >> 8) & 0x0f;
1481                 if (bank > 2)
1482                         /* switch banks */
1483                         i2c_smbus_write_byte_data(client, W83781D_REG_BANK,
1484                                                   bank);
1485                 if (bank == 0 || bank > 2) {
1486                         res = i2c_smbus_read_byte_data(client, reg & 0xff);
1487                 } else {
1488                         /* switch to subclient */
1489                         cl = data->lm75[bank - 1];
1490                         /* convert from ISA to LM75 I2C addresses */
1491                         switch (reg & 0xff) {
1492                         case 0x50:      /* TEMP */
1493                                 res = swab16(i2c_smbus_read_word_data(cl, 0));
1494                                 break;
1495                         case 0x52:      /* CONFIG */
1496                                 res = i2c_smbus_read_byte_data(cl, 1);
1497                                 break;
1498                         case 0x53:      /* HYST */
1499                                 res = swab16(i2c_smbus_read_word_data(cl, 2));
1500                                 break;
1501                         case 0x55:      /* OVER */
1502                         default:
1503                                 res = swab16(i2c_smbus_read_word_data(cl, 3));
1504                                 break;
1505                         }
1506                 }
1507                 if (bank > 2)
1508                         i2c_smbus_write_byte_data(client, W83781D_REG_BANK, 0);
1509         }
1510         mutex_unlock(&data->lock);
1511         return res;
1512 }
1513
1514 static int
1515 w83781d_write_value(struct w83781d_data *data, u16 reg, u16 value)
1516 {
1517         struct i2c_client *client = &data->client;
1518         int word_sized, bank;
1519         struct i2c_client *cl;
1520
1521         mutex_lock(&data->lock);
1522         if (!client->driver) { /* ISA device */
1523                 word_sized = (((reg & 0xff00) == 0x100)
1524                               || ((reg & 0xff00) == 0x200))
1525                     && (((reg & 0x00ff) == 0x53)
1526                         || ((reg & 0x00ff) == 0x55));
1527                 if (reg & 0xff00) {
1528                         outb_p(W83781D_REG_BANK,
1529                                client->addr + W83781D_ADDR_REG_OFFSET);
1530                         outb_p(reg >> 8,
1531                                client->addr + W83781D_DATA_REG_OFFSET);
1532                 }
1533                 outb_p(reg & 0xff, client->addr + W83781D_ADDR_REG_OFFSET);
1534                 if (word_sized) {
1535                         outb_p(value >> 8,
1536                                client->addr + W83781D_DATA_REG_OFFSET);
1537                         outb_p((reg & 0xff) + 1,
1538                                client->addr + W83781D_ADDR_REG_OFFSET);
1539                 }
1540                 outb_p(value & 0xff, client->addr + W83781D_DATA_REG_OFFSET);
1541                 if (reg & 0xff00) {
1542                         outb_p(W83781D_REG_BANK,
1543                                client->addr + W83781D_ADDR_REG_OFFSET);
1544                         outb_p(0, client->addr + W83781D_DATA_REG_OFFSET);
1545                 }
1546         } else {
1547                 bank = (reg >> 8) & 0x0f;
1548                 if (bank > 2)
1549                         /* switch banks */
1550                         i2c_smbus_write_byte_data(client, W83781D_REG_BANK,
1551                                                   bank);
1552                 if (bank == 0 || bank > 2) {
1553                         i2c_smbus_write_byte_data(client, reg & 0xff,
1554                                                   value & 0xff);
1555                 } else {
1556                         /* switch to subclient */
1557                         cl = data->lm75[bank - 1];
1558                         /* convert from ISA to LM75 I2C addresses */
1559                         switch (reg & 0xff) {
1560                         case 0x52:      /* CONFIG */
1561                                 i2c_smbus_write_byte_data(cl, 1, value & 0xff);
1562                                 break;
1563                         case 0x53:      /* HYST */
1564                                 i2c_smbus_write_word_data(cl, 2, swab16(value));
1565                                 break;
1566                         case 0x55:      /* OVER */
1567                                 i2c_smbus_write_word_data(cl, 3, swab16(value));
1568                                 break;
1569                         }
1570                 }
1571                 if (bank > 2)
1572                         i2c_smbus_write_byte_data(client, W83781D_REG_BANK, 0);
1573         }
1574         mutex_unlock(&data->lock);
1575         return 0;
1576 }
1577
1578 static void
1579 w83781d_init_device(struct device *dev)
1580 {
1581         struct w83781d_data *data = dev_get_drvdata(dev);
1582         int i, p;
1583         int type = data->type;
1584         u8 tmp;
1585
1586         if (reset && type != as99127f) { /* this resets registers we don't have
1587                                            documentation for on the as99127f */
1588                 /* Resetting the chip has been the default for a long time,
1589                    but it causes the BIOS initializations (fan clock dividers,
1590                    thermal sensor types...) to be lost, so it is now optional.
1591                    It might even go away if nobody reports it as being useful,
1592                    as I see very little reason why this would be needed at
1593                    all. */
1594                 dev_info(dev, "If reset=1 solved a problem you were "
1595                          "having, please report!\n");
1596
1597                 /* save these registers */
1598                 i = w83781d_read_value(data, W83781D_REG_BEEP_CONFIG);
1599                 p = w83781d_read_value(data, W83781D_REG_PWMCLK12);
1600                 /* Reset all except Watchdog values and last conversion values
1601                    This sets fan-divs to 2, among others */
1602                 w83781d_write_value(data, W83781D_REG_CONFIG, 0x80);
1603                 /* Restore the registers and disable power-on abnormal beep.
1604                    This saves FAN 1/2/3 input/output values set by BIOS. */
1605                 w83781d_write_value(data, W83781D_REG_BEEP_CONFIG, i | 0x80);
1606                 w83781d_write_value(data, W83781D_REG_PWMCLK12, p);
1607                 /* Disable master beep-enable (reset turns it on).
1608                    Individual beep_mask should be reset to off but for some reason
1609                    disabling this bit helps some people not get beeped */
1610                 w83781d_write_value(data, W83781D_REG_BEEP_INTS2, 0);
1611         }
1612
1613         /* Disable power-on abnormal beep, as advised by the datasheet.
1614            Already done if reset=1. */
1615         if (init && !reset && type != as99127f) {
1616                 i = w83781d_read_value(data, W83781D_REG_BEEP_CONFIG);
1617                 w83781d_write_value(data, W83781D_REG_BEEP_CONFIG, i | 0x80);
1618         }
1619
1620         data->vrm = vid_which_vrm();
1621
1622         if ((type != w83781d) && (type != as99127f)) {
1623                 tmp = w83781d_read_value(data, W83781D_REG_SCFG1);
1624                 for (i = 1; i <= 3; i++) {
1625                         if (!(tmp & BIT_SCFG1[i - 1])) {
1626                                 data->sens[i - 1] = 4;
1627                         } else {
1628                                 if (w83781d_read_value
1629                                     (data,
1630                                      W83781D_REG_SCFG2) & BIT_SCFG2[i - 1])
1631                                         data->sens[i - 1] = 1;
1632                                 else
1633                                         data->sens[i - 1] = 2;
1634                         }
1635                         if (type == w83783s && i == 2)
1636                                 break;
1637                 }
1638         }
1639
1640         if (init && type != as99127f) {
1641                 /* Enable temp2 */
1642                 tmp = w83781d_read_value(data, W83781D_REG_TEMP2_CONFIG);
1643                 if (tmp & 0x01) {
1644                         dev_warn(dev, "Enabling temp2, readings "
1645                                  "might not make sense\n");
1646                         w83781d_write_value(data, W83781D_REG_TEMP2_CONFIG,
1647                                 tmp & 0xfe);
1648                 }
1649
1650                 /* Enable temp3 */
1651                 if (type != w83783s) {
1652                         tmp = w83781d_read_value(data,
1653                                 W83781D_REG_TEMP3_CONFIG);
1654                         if (tmp & 0x01) {
1655                                 dev_warn(dev, "Enabling temp3, "
1656                                          "readings might not make sense\n");
1657                                 w83781d_write_value(data,
1658                                         W83781D_REG_TEMP3_CONFIG, tmp & 0xfe);
1659                         }
1660                 }
1661         }
1662
1663         /* Start monitoring */
1664         w83781d_write_value(data, W83781D_REG_CONFIG,
1665                             (w83781d_read_value(data,
1666                                                 W83781D_REG_CONFIG) & 0xf7)
1667                             | 0x01);
1668
1669         /* A few vars need to be filled upon startup */
1670         for (i = 0; i < 3; i++) {
1671                 data->fan_min[i] = w83781d_read_value(data,
1672                                         W83781D_REG_FAN_MIN(i));
1673         }
1674
1675         mutex_init(&data->update_lock);
1676 }
1677
1678 static struct w83781d_data *w83781d_update_device(struct device *dev)
1679 {
1680         struct w83781d_data *data = dev_get_drvdata(dev);
1681         struct i2c_client *client = &data->client;
1682         int i;
1683
1684         mutex_lock(&data->update_lock);
1685
1686         if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
1687             || !data->valid) {
1688                 dev_dbg(dev, "Starting device update\n");
1689
1690                 for (i = 0; i <= 8; i++) {
1691                         if (data->type == w83783s && i == 1)
1692                                 continue;       /* 783S has no in1 */
1693                         data->in[i] =
1694                             w83781d_read_value(data, W83781D_REG_IN(i));
1695                         data->in_min[i] =
1696                             w83781d_read_value(data, W83781D_REG_IN_MIN(i));
1697                         data->in_max[i] =
1698                             w83781d_read_value(data, W83781D_REG_IN_MAX(i));
1699                         if ((data->type != w83782d) && (i == 6))
1700                                 break;
1701                 }
1702                 for (i = 0; i < 3; i++) {
1703                         data->fan[i] =
1704                             w83781d_read_value(data, W83781D_REG_FAN(i));
1705                         data->fan_min[i] =
1706                             w83781d_read_value(data, W83781D_REG_FAN_MIN(i));
1707                 }
1708                 if (data->type != w83781d && data->type != as99127f) {
1709                         for (i = 0; i < 4; i++) {
1710                                 data->pwm[i] =
1711                                     w83781d_read_value(data,
1712                                                        W83781D_REG_PWM[i]);
1713                                 if ((data->type != w83782d || !client->driver)
1714                                     && i == 1)
1715                                         break;
1716                         }
1717                         /* Only PWM2 can be disabled */
1718                         data->pwm2_enable = (w83781d_read_value(data,
1719                                               W83781D_REG_PWMCLK12) & 0x08) >> 3;
1720                 }
1721
1722                 data->temp = w83781d_read_value(data, W83781D_REG_TEMP(1));
1723                 data->temp_max =
1724                     w83781d_read_value(data, W83781D_REG_TEMP_OVER(1));
1725                 data->temp_max_hyst =
1726                     w83781d_read_value(data, W83781D_REG_TEMP_HYST(1));
1727                 data->temp_add[0] =
1728                     w83781d_read_value(data, W83781D_REG_TEMP(2));
1729                 data->temp_max_add[0] =
1730                     w83781d_read_value(data, W83781D_REG_TEMP_OVER(2));
1731                 data->temp_max_hyst_add[0] =
1732                     w83781d_read_value(data, W83781D_REG_TEMP_HYST(2));
1733                 if (data->type != w83783s) {
1734                         data->temp_add[1] =
1735                             w83781d_read_value(data, W83781D_REG_TEMP(3));
1736                         data->temp_max_add[1] =
1737                             w83781d_read_value(data,
1738                                                W83781D_REG_TEMP_OVER(3));
1739                         data->temp_max_hyst_add[1] =
1740                             w83781d_read_value(data,
1741                                                W83781D_REG_TEMP_HYST(3));
1742                 }
1743                 i = w83781d_read_value(data, W83781D_REG_VID_FANDIV);
1744                 data->vid = i & 0x0f;
1745                 data->vid |= (w83781d_read_value(data,
1746                                         W83781D_REG_CHIPID) & 0x01) << 4;
1747                 data->fan_div[0] = (i >> 4) & 0x03;
1748                 data->fan_div[1] = (i >> 6) & 0x03;
1749                 data->fan_div[2] = (w83781d_read_value(data,
1750                                         W83781D_REG_PIN) >> 6) & 0x03;
1751                 if ((data->type != w83781d) && (data->type != as99127f)) {
1752                         i = w83781d_read_value(data, W83781D_REG_VBAT);
1753                         data->fan_div[0] |= (i >> 3) & 0x04;
1754                         data->fan_div[1] |= (i >> 4) & 0x04;
1755                         data->fan_div[2] |= (i >> 5) & 0x04;
1756                 }
1757                 if (data->type == w83782d) {
1758                         data->alarms = w83781d_read_value(data,
1759                                                 W83782D_REG_ALARM1)
1760                                      | (w83781d_read_value(data,
1761                                                 W83782D_REG_ALARM2) << 8)
1762                                      | (w83781d_read_value(data,
1763                                                 W83782D_REG_ALARM3) << 16);
1764                 } else if (data->type == w83783s) {
1765                         data->alarms = w83781d_read_value(data,
1766                                                 W83782D_REG_ALARM1)
1767                                      | (w83781d_read_value(data,
1768                                                 W83782D_REG_ALARM2) << 8);
1769                 } else {
1770                         /* No real-time status registers, fall back to
1771                            interrupt status registers */
1772                         data->alarms = w83781d_read_value(data,
1773                                                 W83781D_REG_ALARM1)
1774                                      | (w83781d_read_value(data,
1775                                                 W83781D_REG_ALARM2) << 8);
1776                 }
1777                 i = w83781d_read_value(data, W83781D_REG_BEEP_INTS2);
1778                 data->beep_enable = i >> 7;
1779                 data->beep_mask = ((i & 0x7f) << 8) +
1780                     w83781d_read_value(data, W83781D_REG_BEEP_INTS1);
1781                 if ((data->type != w83781d) && (data->type != as99127f)) {
1782                         data->beep_mask |=
1783                             w83781d_read_value(data,
1784                                                W83781D_REG_BEEP_INTS3) << 16;
1785                 }
1786                 data->last_updated = jiffies;
1787                 data->valid = 1;
1788         }
1789
1790         mutex_unlock(&data->update_lock);
1791
1792         return data;
1793 }
1794
1795 /* return 1 if a supported chip is found, 0 otherwise */
1796 static int __init
1797 w83781d_isa_found(unsigned short address)
1798 {
1799         int val, save, found = 0;
1800
1801         /* We have to request the region in two parts because some
1802            boards declare base+4 to base+7 as a PNP device */
1803         if (!request_region(address, 4, "w83781d")) {
1804                 pr_debug("w83781d: Failed to request low part of region\n");
1805                 return 0;
1806         }
1807         if (!request_region(address + 4, 4, "w83781d")) {
1808                 pr_debug("w83781d: Failed to request high part of region\n");
1809                 release_region(address, 4);
1810                 return 0;
1811         }
1812
1813 #define REALLY_SLOW_IO
1814         /* We need the timeouts for at least some W83781D-like
1815            chips. But only if we read 'undefined' registers. */
1816         val = inb_p(address + 1);
1817         if (inb_p(address + 2) != val
1818          || inb_p(address + 3) != val
1819          || inb_p(address + 7) != val) {
1820                 pr_debug("w83781d: Detection failed at step 1\n");
1821                 goto release;
1822         }
1823 #undef REALLY_SLOW_IO
1824
1825         /* We should be able to change the 7 LSB of the address port. The
1826            MSB (busy flag) should be clear initially, set after the write. */
1827         save = inb_p(address + W83781D_ADDR_REG_OFFSET);
1828         if (save & 0x80) {
1829                 pr_debug("w83781d: Detection failed at step 2\n");
1830                 goto release;
1831         }
1832         val = ~save & 0x7f;
1833         outb_p(val, address + W83781D_ADDR_REG_OFFSET);
1834         if (inb_p(address + W83781D_ADDR_REG_OFFSET) != (val | 0x80)) {
1835                 outb_p(save, address + W83781D_ADDR_REG_OFFSET);
1836                 pr_debug("w83781d: Detection failed at step 3\n");
1837                 goto release;
1838         }
1839
1840         /* We found a device, now see if it could be a W83781D */
1841         outb_p(W83781D_REG_CONFIG, address + W83781D_ADDR_REG_OFFSET);
1842         val = inb_p(address + W83781D_DATA_REG_OFFSET);
1843         if (val & 0x80) {
1844                 pr_debug("w83781d: Detection failed at step 4\n");
1845                 goto release;
1846         }
1847         outb_p(W83781D_REG_BANK, address + W83781D_ADDR_REG_OFFSET);
1848         save = inb_p(address + W83781D_DATA_REG_OFFSET);
1849         outb_p(W83781D_REG_CHIPMAN, address + W83781D_ADDR_REG_OFFSET);
1850         val = inb_p(address + W83781D_DATA_REG_OFFSET);
1851         if ((!(save & 0x80) && (val != 0xa3))
1852          || ((save & 0x80) && (val != 0x5c))) {
1853                 pr_debug("w83781d: Detection failed at step 5\n");
1854                 goto release;
1855         }
1856         outb_p(W83781D_REG_I2C_ADDR, address + W83781D_ADDR_REG_OFFSET);
1857         val = inb_p(address + W83781D_DATA_REG_OFFSET);
1858         if (val < 0x03 || val > 0x77) { /* Not a valid I2C address */
1859                 pr_debug("w83781d: Detection failed at step 6\n");
1860                 goto release;
1861         }
1862
1863         /* The busy flag should be clear again */
1864         if (inb_p(address + W83781D_ADDR_REG_OFFSET) & 0x80) {
1865                 pr_debug("w83781d: Detection failed at step 7\n");
1866                 goto release;
1867         }
1868
1869         /* Determine the chip type */
1870         outb_p(W83781D_REG_BANK, address + W83781D_ADDR_REG_OFFSET);
1871         save = inb_p(address + W83781D_DATA_REG_OFFSET);
1872         outb_p(save & 0xf8, address + W83781D_DATA_REG_OFFSET);
1873         outb_p(W83781D_REG_WCHIPID, address + W83781D_ADDR_REG_OFFSET);
1874         val = inb_p(address + W83781D_DATA_REG_OFFSET);
1875         if ((val & 0xfe) == 0x10        /* W83781D */
1876          || val == 0x30)                /* W83782D */
1877                 found = 1;
1878
1879         if (found)
1880                 pr_info("w83781d: Found a %s chip at %#x\n",
1881                         val == 0x30 ? "W83782D" : "W83781D", (int)address);
1882
1883  release:
1884         release_region(address + 4, 4);
1885         release_region(address, 4);
1886         return found;
1887 }
1888
1889 static int __init
1890 w83781d_isa_device_add(unsigned short address)
1891 {
1892         struct resource res = {
1893                 .start  = address,
1894                 .end    = address + W83781D_EXTENT - 1,
1895                 .name   = "w83781d",
1896                 .flags  = IORESOURCE_IO,
1897         };
1898         int err;
1899
1900         pdev = platform_device_alloc("w83781d", address);
1901         if (!pdev) {
1902                 err = -ENOMEM;
1903                 printk(KERN_ERR "w83781d: Device allocation failed\n");
1904                 goto exit;
1905         }
1906
1907         err = platform_device_add_resources(pdev, &res, 1);
1908         if (err) {
1909                 printk(KERN_ERR "w83781d: Device resource addition failed "
1910                        "(%d)\n", err);
1911                 goto exit_device_put;
1912         }
1913
1914         err = platform_device_add(pdev);
1915         if (err) {
1916                 printk(KERN_ERR "w83781d: Device addition failed (%d)\n",
1917                        err);
1918                 goto exit_device_put;
1919         }
1920
1921         return 0;
1922
1923  exit_device_put:
1924         platform_device_put(pdev);
1925  exit:
1926         pdev = NULL;
1927         return err;
1928 }
1929
1930 static int __init
1931 sensors_w83781d_init(void)
1932 {
1933         int res;
1934
1935         res = i2c_add_driver(&w83781d_driver);
1936         if (res)
1937                 goto exit;
1938
1939         if (w83781d_isa_found(isa_address)) {
1940                 res = platform_driver_register(&w83781d_isa_driver);
1941                 if (res)
1942                         goto exit_unreg_i2c_driver;
1943
1944                 /* Sets global pdev as a side effect */
1945                 res = w83781d_isa_device_add(isa_address);
1946                 if (res)
1947                         goto exit_unreg_isa_driver;
1948         }
1949
1950         return 0;
1951
1952  exit_unreg_isa_driver:
1953         platform_driver_unregister(&w83781d_isa_driver);
1954  exit_unreg_i2c_driver:
1955         i2c_del_driver(&w83781d_driver);
1956  exit:
1957         return res;
1958 }
1959
1960 static void __exit
1961 sensors_w83781d_exit(void)
1962 {
1963         if (pdev) {
1964                 platform_device_unregister(pdev);
1965                 platform_driver_unregister(&w83781d_isa_driver);
1966         }
1967         i2c_del_driver(&w83781d_driver);
1968 }
1969
1970 MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, "
1971               "Philip Edelbrock <phil@netroedge.com>, "
1972               "and Mark Studebaker <mdsxyz123@yahoo.com>");
1973 MODULE_DESCRIPTION("W83781D driver");
1974 MODULE_LICENSE("GPL");
1975
1976 module_init(sensors_w83781d_init);
1977 module_exit(sensors_w83781d_exit);