drivers/hwmon/smsc47m1.c

   1 /*
   2     smsc47m1.c - Part of lm_sensors, Linux kernel modules
   3                  for hardware monitoring
   4
   5     Supports the SMSC LPC47B27x, LPC47M10x, LPC47M13x and LPC47M14x
   6     Super-I/O chips.
   7
   8     Copyright (C) 2002 Mark D. Studebaker <mdsxyz123@yahoo.com>
   9     Copyright (C) 2004 Jean Delvare <khali@linux-fr.org>
  10     Ported to Linux 2.6 by Gabriele Gorla <gorlik@yahoo.com>
  11                         and Jean Delvare
  12
  13     This program is free software; you can redistribute it and/or modify
  14     it under the terms of the GNU General Public License as published by
  15     the Free Software Foundation; either version 2 of the License, or
  16     (at your option) any later version.
  17
  18     This program is distributed in the hope that it will be useful,
  19     but WITHOUT ANY WARRANTY; without even the implied warranty of
  20     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  21     GNU General Public License for more details.
  22
  23     You should have received a copy of the GNU General Public License
  24     along with this program; if not, write to the Free Software
  25     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  26 */
  27
  28 #include <linux/module.h>
  29 #include <linux/slab.h>
  30 #include <linux/ioport.h>
  31 #include <linux/jiffies.h>
  32 #include <linux/i2c.h>
  33 #include <linux/i2c-sensor.h>
  34 #include <linux/init.h>
  35 #include <asm/io.h>
  36
  37 static unsigned short normal_i2c[] = { I2C_CLIENT_END };
  38 /* Address is autodetected, there is no default value */
  39 static unsigned int normal_isa[] = { 0x0000, I2C_CLIENT_ISA_END };
  40 static struct i2c_force_data forces[] = {{NULL}};
  41
  42 enum chips { any_chip, smsc47m1 };
  43 static struct i2c_address_data addr_data = {
  44         .normal_i2c             = normal_i2c,
  45         .normal_isa             = normal_isa,
  46         .forces                 = forces,
  47 };
  48
  49 /* Super-I/0 registers and commands */
  50
  51 #define REG     0x2e    /* The register to read/write */
  52 #define VAL     0x2f    /* The value to read/write */
  53
  54 static inline void
  55 superio_outb(int reg, int val)
  56 {
  57         outb(reg, REG);
  58         outb(val, VAL);
  59 }
  60
  61 static inline int
  62 superio_inb(int reg)
  63 {
  64         outb(reg, REG);
  65         return inb(VAL);
  66 }
  67
  68 /* logical device for fans is 0x0A */
  69 #define superio_select() superio_outb(0x07, 0x0A)
  70
  71 static inline void
  72 superio_enter(void)
  73 {
  74         outb(0x55, REG);
  75 }
  76
  77 static inline void
  78 superio_exit(void)
  79 {
  80         outb(0xAA, REG);
  81 }
  82
  83 #define SUPERIO_REG_ACT         0x30
  84 #define SUPERIO_REG_BASE        0x60
  85 #define SUPERIO_REG_DEVID       0x20
  86
  87 /* Logical device registers */
  88
  89 #define SMSC_EXTENT             0x80
  90
  91 /* nr is 0 or 1 in the macros below */
  92 #define SMSC47M1_REG_ALARM              0x04
  93 #define SMSC47M1_REG_TPIN(nr)           (0x34 - (nr))
  94 #define SMSC47M1_REG_PPIN(nr)           (0x36 - (nr))
  95 #define SMSC47M1_REG_PWM(nr)            (0x56 + (nr))
  96 #define SMSC47M1_REG_FANDIV             0x58
  97 #define SMSC47M1_REG_FAN(nr)            (0x59 + (nr))
  98 #define SMSC47M1_REG_FAN_PRELOAD(nr)    (0x5B + (nr))
  99
 100 #define MIN_FROM_REG(reg,div)           ((reg)>=192 ? 0 : \
 101                                          983040/((192-(reg))*(div)))
 102 #define FAN_FROM_REG(reg,div,preload)   ((reg)<=(preload) || (reg)==255 ? 0 : \
 103                                          983040/(((reg)-(preload))*(div)))
 104 #define DIV_FROM_REG(reg)               (1 << (reg))
 105 #define PWM_FROM_REG(reg)               (((reg) & 0x7E) << 1)
 106 #define PWM_EN_FROM_REG(reg)            ((~(reg)) & 0x01)
 107 #define PWM_TO_REG(reg)                 (((reg) >> 1) & 0x7E)
 108
 109 struct smsc47m1_data {
 110         struct i2c_client client;
 111         struct semaphore lock;
 112
 113         struct semaphore update_lock;
 114         unsigned long last_updated;     /* In jiffies */
 115
 116         u8 fan[2];              /* Register value */
 117         u8 fan_preload[2];      /* Register value */
 118         u8 fan_div[2];          /* Register encoding, shifted right */
 119         u8 alarms;              /* Register encoding */
 120         u8 pwm[2];              /* Register value (bit 7 is enable) */
 121 };
 122
 123
 124 static int smsc47m1_attach_adapter(struct i2c_adapter *adapter);
 125 static int smsc47m1_find(int *address);
 126 static int smsc47m1_detect(struct i2c_adapter *adapter, int address, int kind);
 127 static int smsc47m1_detach_client(struct i2c_client *client);
 128
 129 static int smsc47m1_read_value(struct i2c_client *client, u8 reg);
 130 static void smsc47m1_write_value(struct i2c_client *client, u8 reg, u8 value);
 131
 132 static struct smsc47m1_data *smsc47m1_update_device(struct device *dev,
 133                 int init);
 134
 135
 136 static struct i2c_driver smsc47m1_driver = {
 137         .owner          = THIS_MODULE,
 138         .name           = "smsc47m1",
 139         .id             = I2C_DRIVERID_SMSC47M1,
 140         .flags          = I2C_DF_NOTIFY,
 141         .attach_adapter = smsc47m1_attach_adapter,
 142         .detach_client  = smsc47m1_detach_client,
 143 };
 144
 145 /* nr is 0 or 1 in the callback functions below */
 146
 147 static ssize_t get_fan(struct device *dev, char *buf, int nr)
 148 {
 149         struct smsc47m1_data *data = smsc47m1_update_device(dev, 0);
 150         /* This chip (stupidly) stops monitoring fan speed if PWM is
 151            enabled and duty cycle is 0%. This is fine if the monitoring
 152            and control concern the same fan, but troublesome if they are
 153            not (which could as well happen). */
 154         int rpm = (data->pwm[nr] & 0x7F) == 0x00 ? 0 :
 155                   FAN_FROM_REG(data->fan[nr],
 156                                DIV_FROM_REG(data->fan_div[nr]),
 157                                data->fan_preload[nr]);
 158         return sprintf(buf, "%d\n", rpm);
 159 }
 160
 161 static ssize_t get_fan_min(struct device *dev, char *buf, int nr)
 162 {
 163         struct smsc47m1_data *data = smsc47m1_update_device(dev, 0);
 164         int rpm = MIN_FROM_REG(data->fan_preload[nr],
 165                                DIV_FROM_REG(data->fan_div[nr]));
 166         return sprintf(buf, "%d\n", rpm);
 167 }
 168
 169 static ssize_t get_fan_div(struct device *dev, char *buf, int nr)
 170 {
 171         struct smsc47m1_data *data = smsc47m1_update_device(dev, 0);
 172         return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr]));
 173 }
 174
 175 static ssize_t get_pwm(struct device *dev, char *buf, int nr)
 176 {
 177         struct smsc47m1_data *data = smsc47m1_update_device(dev, 0);
 178         return sprintf(buf, "%d\n", PWM_FROM_REG(data->pwm[nr]));
 179 }
 180
 181 static ssize_t get_pwm_en(struct device *dev, char *buf, int nr)
 182 {
 183         struct smsc47m1_data *data = smsc47m1_update_device(dev, 0);
 184         return sprintf(buf, "%d\n", PWM_EN_FROM_REG(data->pwm[nr]));
 185 }
 186
 187 static ssize_t get_alarms(struct device *dev, struct device_attribute *attr, char *buf)
 188 {
 189         struct smsc47m1_data *data = smsc47m1_update_device(dev, 0);
 190         return sprintf(buf, "%d\n", data->alarms);
 191 }
 192
 193 static ssize_t set_fan_min(struct device *dev, const char *buf,
 194                 size_t count, int nr)
 195 {
 196         struct i2c_client *client = to_i2c_client(dev);
 197         struct smsc47m1_data *data = i2c_get_clientdata(client);
 198         long rpmdiv, val = simple_strtol(buf, NULL, 10);
 199
 200         down(&data->update_lock);
 201         rpmdiv = val * DIV_FROM_REG(data->fan_div[nr]);
 202
 203         if (983040 > 192 * rpmdiv || 2 * rpmdiv > 983040) {
 204                 up(&data->update_lock);
 205                 return -EINVAL;
 206         }
 207
 208         data->fan_preload[nr] = 192 - ((983040 + rpmdiv / 2) / rpmdiv);
 209         smsc47m1_write_value(client, SMSC47M1_REG_FAN_PRELOAD(nr),
 210                              data->fan_preload[nr]);
 211         up(&data->update_lock);
 212
 213         return count;
 214 }
 215
 216 /* Note: we save and restore the fan minimum here, because its value is
 217    determined in part by the fan clock divider.  This follows the principle
 218    of least suprise; the user doesn't expect the fan minimum to change just
 219    because the divider changed. */
 220 static ssize_t set_fan_div(struct device *dev, const char *buf,
 221                 size_t count, int nr)
 222 {
 223         struct i2c_client *client = to_i2c_client(dev);
 224         struct smsc47m1_data *data = i2c_get_clientdata(client);
 225
 226         long new_div = simple_strtol(buf, NULL, 10), tmp;
 227         u8 old_div = DIV_FROM_REG(data->fan_div[nr]);
 228
 229         if (new_div == old_div) /* No change */
 230                 return count;
 231
 232         down(&data->update_lock);
 233         switch (new_div) {
 234         case 1: data->fan_div[nr] = 0; break;
 235         case 2: data->fan_div[nr] = 1; break;
 236         case 4: data->fan_div[nr] = 2; break;
 237         case 8: data->fan_div[nr] = 3; break;
 238         default:
 239                 up(&data->update_lock);
 240                 return -EINVAL;
 241         }
 242
 243         tmp = smsc47m1_read_value(client, SMSC47M1_REG_FANDIV) & 0x0F;
 244         tmp |= (data->fan_div[0] << 4) | (data->fan_div[1] << 6);
 245         smsc47m1_write_value(client, SMSC47M1_REG_FANDIV, tmp);
 246
 247         /* Preserve fan min */
 248         tmp = 192 - (old_div * (192 - data->fan_preload[nr])
 249                      + new_div / 2) / new_div;
 250         data->fan_preload[nr] = SENSORS_LIMIT(tmp, 0, 191);
 251         smsc47m1_write_value(client, SMSC47M1_REG_FAN_PRELOAD(nr),
 252                              data->fan_preload[nr]);
 253         up(&data->update_lock);
 254
 255         return count;
 256 }
 257
 258 static ssize_t set_pwm(struct device *dev, const char *buf,
 259                 size_t count, int nr)
 260 {
 261         struct i2c_client *client = to_i2c_client(dev);
 262         struct smsc47m1_data *data = i2c_get_clientdata(client);
 263
 264         long val = simple_strtol(buf, NULL, 10);
 265
 266         if (val < 0 || val > 255)
 267                 return -EINVAL;
 268
 269         down(&data->update_lock);
 270         data->pwm[nr] &= 0x81; /* Preserve additional bits */
 271         data->pwm[nr] |= PWM_TO_REG(val);
 272         smsc47m1_write_value(client, SMSC47M1_REG_PWM(nr),
 273                              data->pwm[nr]);
 274         up(&data->update_lock);
 275
 276         return count;
 277 }
 278
 279 static ssize_t set_pwm_en(struct device *dev, const char *buf,
 280                 size_t count, int nr)
 281 {
 282         struct i2c_client *client = to_i2c_client(dev);
 283         struct smsc47m1_data *data = i2c_get_clientdata(client);
 284
 285         long val = simple_strtol(buf, NULL, 10);
 286
 287         if (val != 0 && val != 1)
 288                 return -EINVAL;
 289
 290         down(&data->update_lock);
 291         data->pwm[nr] &= 0xFE; /* preserve the other bits */
 292         data->pwm[nr] |= !val;
 293         smsc47m1_write_value(client, SMSC47M1_REG_PWM(nr),
 294                              data->pwm[nr]);
 295         up(&data->update_lock);
 296
 297         return count;
 298 }
 299
 300 #define fan_present(offset)                                             \
 301 static ssize_t get_fan##offset (struct device *dev, struct device_attribute *attr, char *buf)           \
 302 {                                                                       \
 303         return get_fan(dev, buf, offset - 1);                           \
 304 }                                                                       \
 305 static ssize_t get_fan##offset##_min (struct device *dev, struct device_attribute *attr, char *buf)     \
 306 {                                                                       \
 307         return get_fan_min(dev, buf, offset - 1);                       \
 308 }                                                                       \
 309 static ssize_t set_fan##offset##_min (struct device *dev, struct device_attribute *attr,                \
 310                 const char *buf, size_t count)                          \
 311 {                                                                       \
 312         return set_fan_min(dev, buf, count, offset - 1);                \
 313 }                                                                       \
 314 static ssize_t get_fan##offset##_div (struct device *dev, struct device_attribute *attr, char *buf)     \
 315 {                                                                       \
 316         return get_fan_div(dev, buf, offset - 1);                       \
 317 }                                                                       \
 318 static ssize_t set_fan##offset##_div (struct device *dev, struct device_attribute *attr,                \
 319                 const char *buf, size_t count)                          \
 320 {                                                                       \
 321         return set_fan_div(dev, buf, count, offset - 1);                \
 322 }                                                                       \
 323 static ssize_t get_pwm##offset (struct device *dev, struct device_attribute *attr, char *buf)           \
 324 {                                                                       \
 325         return get_pwm(dev, buf, offset - 1);                           \
 326 }                                                                       \
 327 static ssize_t set_pwm##offset (struct device *dev, struct device_attribute *attr,                      \
 328                 const char *buf, size_t count)                          \
 329 {                                                                       \
 330         return set_pwm(dev, buf, count, offset - 1);                    \
 331 }                                                                       \
 332 static ssize_t get_pwm##offset##_en (struct device *dev, struct device_attribute *attr, char *buf)      \
 333 {                                                                       \
 334         return get_pwm_en(dev, buf, offset - 1);                        \
 335 }                                                                       \
 336 static ssize_t set_pwm##offset##_en (struct device *dev, struct device_attribute *attr,         \
 337                 const char *buf, size_t count)                          \
 338 {                                                                       \
 339         return set_pwm_en(dev, buf, count, offset - 1);                 \
 340 }                                                                       \
 341 static DEVICE_ATTR(fan##offset##_input, S_IRUGO, get_fan##offset,       \
 342                 NULL);                                                  \
 343 static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR,                \
 344                 get_fan##offset##_min, set_fan##offset##_min);          \
 345 static DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR,                \
 346                 get_fan##offset##_div, set_fan##offset##_div);          \
 347 static DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR,                      \
 348                 get_pwm##offset, set_pwm##offset);                      \
 349 static DEVICE_ATTR(pwm##offset##_enable, S_IRUGO | S_IWUSR,             \
 350                 get_pwm##offset##_en, set_pwm##offset##_en);
 351
 352 fan_present(1);
 353 fan_present(2);
 354
 355 static DEVICE_ATTR(alarms, S_IRUGO, get_alarms, NULL);
 356
 357 static int smsc47m1_attach_adapter(struct i2c_adapter *adapter)
 358 {
 359         if (!(adapter->class & I2C_CLASS_HWMON))
 360                 return 0;
 361         return i2c_detect(adapter, &addr_data, smsc47m1_detect);
 362 }
 363
 364 static int smsc47m1_find(int *address)
 365 {
 366         u8 val;
 367
 368         superio_enter();
 369         val = superio_inb(SUPERIO_REG_DEVID);
 370
 371         /*
 372          * SMSC LPC47M10x/LPC47M13x (device id 0x59), LPC47M14x (device id
 373          * 0x5F) and LPC47B27x (device id 0x51) have fan control.
 374          * The LPC47M15x and LPC47M192 chips "with hardware monitoring block"
 375          * can do much more besides (device id 0x60).
 376          */
 377         if (val == 0x51)
 378                 printk(KERN_INFO "smsc47m1: Found SMSC LPC47B27x\n");
 379         else if (val == 0x59)
 380                 printk(KERN_INFO "smsc47m1: Found SMSC LPC47M10x/LPC47M13x\n");
 381         else if (val == 0x5F)
 382                 printk(KERN_INFO "smsc47m1: Found SMSC LPC47M14x\n");
 383         else if (val == 0x60)
 384                 printk(KERN_INFO "smsc47m1: Found SMSC LPC47M15x/LPC47M192\n");
 385         else {
 386                 superio_exit();
 387                 return -ENODEV;
 388         }
 389
 390         superio_select();
 391         *address = (superio_inb(SUPERIO_REG_BASE) << 8)
 392                  |  superio_inb(SUPERIO_REG_BASE + 1);
 393         val = superio_inb(SUPERIO_REG_ACT);
 394         if (*address == 0 || (val & 0x01) == 0) {
 395                 printk(KERN_INFO "smsc47m1: Device is disabled, will not use\n");
 396                 superio_exit();
 397                 return -ENODEV;
 398         }
 399
 400         superio_exit();
 401         return 0;
 402 }
 403
 404 static int smsc47m1_detect(struct i2c_adapter *adapter, int address, int kind)
 405 {
 406         struct i2c_client *new_client;
 407         struct smsc47m1_data *data;
 408         int err = 0;
 409         int fan1, fan2, pwm1, pwm2;
 410
 411         if (!i2c_is_isa_adapter(adapter)) {
 412                 return 0;
 413         }
 414
 415         if (!request_region(address, SMSC_EXTENT, smsc47m1_driver.name)) {
 416                 dev_err(&adapter->dev, "Region 0x%x already in use!\n", address);
 417                 return -EBUSY;
 418         }
 419
 420         if (!(data = kmalloc(sizeof(struct smsc47m1_data), GFP_KERNEL))) {
 421                 err = -ENOMEM;
 422                 goto error_release;
 423         }
 424         memset(data, 0x00, sizeof(struct smsc47m1_data));
 425
 426         new_client = &data->client;
 427         i2c_set_clientdata(new_client, data);
 428         new_client->addr = address;
 429         init_MUTEX(&data->lock);
 430         new_client->adapter = adapter;
 431         new_client->driver = &smsc47m1_driver;
 432         new_client->flags = 0;
 433
 434         strlcpy(new_client->name, "smsc47m1", I2C_NAME_SIZE);
 435         init_MUTEX(&data->update_lock);
 436
 437         /* If no function is properly configured, there's no point in
 438            actually registering the chip. */
 439         fan1 = (smsc47m1_read_value(new_client, SMSC47M1_REG_TPIN(0)) & 0x05)
 440                == 0x05;
 441         fan2 = (smsc47m1_read_value(new_client, SMSC47M1_REG_TPIN(1)) & 0x05)
 442                == 0x05;
 443         pwm1 = (smsc47m1_read_value(new_client, SMSC47M1_REG_PPIN(0)) & 0x05)
 444                == 0x04;
 445         pwm2 = (smsc47m1_read_value(new_client, SMSC47M1_REG_PPIN(1)) & 0x05)
 446                == 0x04;
 447         if (!(fan1 || fan2 || pwm1 || pwm2)) {
 448                 dev_warn(&new_client->dev, "Device is not configured, will not use\n");
 449                 err = -ENODEV;
 450                 goto error_free;
 451         }
 452
 453         if ((err = i2c_attach_client(new_client)))
 454                 goto error_free;
 455
 456         /* Some values (fan min, clock dividers, pwm registers) may be
 457            needed before any update is triggered, so we better read them
 458            at least once here. We don't usually do it that way, but in
 459            this particular case, manually reading 5 registers out of 8
 460            doesn't make much sense and we're better using the existing
 461            function. */
 462         smsc47m1_update_device(&new_client->dev, 1);
 463
 464         if (fan1) {
 465                 device_create_file(&new_client->dev, &dev_attr_fan1_input);
 466                 device_create_file(&new_client->dev, &dev_attr_fan1_min);
 467                 device_create_file(&new_client->dev, &dev_attr_fan1_div);
 468         } else
 469                 dev_dbg(&new_client->dev, "Fan 1 not enabled by hardware, "
 470                         "skipping\n");
 471
 472         if (fan2) {
 473                 device_create_file(&new_client->dev, &dev_attr_fan2_input);
 474                 device_create_file(&new_client->dev, &dev_attr_fan2_min);
 475                 device_create_file(&new_client->dev, &dev_attr_fan2_div);
 476         } else
 477                 dev_dbg(&new_client->dev, "Fan 2 not enabled by hardware, "
 478                         "skipping\n");
 479
 480         if (pwm1) {
 481                 device_create_file(&new_client->dev, &dev_attr_pwm1);
 482                 device_create_file(&new_client->dev, &dev_attr_pwm1_enable);
 483         } else
 484                 dev_dbg(&new_client->dev, "PWM 1 not enabled by hardware, "
 485                         "skipping\n");
 486         if (pwm2) {
 487                 device_create_file(&new_client->dev, &dev_attr_pwm2);
 488                 device_create_file(&new_client->dev, &dev_attr_pwm2_enable);
 489         } else
 490                 dev_dbg(&new_client->dev, "PWM 2 not enabled by hardware, "
 491                         "skipping\n");
 492
 493         device_create_file(&new_client->dev, &dev_attr_alarms);
 494
 495         return 0;
 496
 497 error_free:
 498         kfree(new_client);
 499 error_release:
 500         release_region(address, SMSC_EXTENT);
 501         return err;
 502 }
 503
 504 static int smsc47m1_detach_client(struct i2c_client *client)
 505 {
 506         int err;
 507
 508         if ((err = i2c_detach_client(client))) {
 509                 dev_err(&client->dev, "Client deregistration failed, "
 510                         "client not detached.\n");
 511                 return err;
 512         }
 513
 514         release_region(client->addr, SMSC_EXTENT);
 515         kfree(i2c_get_clientdata(client));
 516
 517         return 0;
 518 }
 519
 520 static int smsc47m1_read_value(struct i2c_client *client, u8 reg)
 521 {
 522         int res;
 523
 524         down(&((struct smsc47m1_data *) i2c_get_clientdata(client))->lock);
 525         res = inb_p(client->addr + reg);
 526         up(&((struct smsc47m1_data *) i2c_get_clientdata(client))->lock);
 527         return res;
 528 }
 529
 530 static void smsc47m1_write_value(struct i2c_client *client, u8 reg, u8 value)
 531 {
 532         down(&((struct smsc47m1_data *) i2c_get_clientdata(client))->lock);
 533         outb_p(value, client->addr + reg);
 534         up(&((struct smsc47m1_data *) i2c_get_clientdata(client))->lock);
 535 }
 536
 537 static struct smsc47m1_data *smsc47m1_update_device(struct device *dev,
 538                 int init)
 539 {
 540         struct i2c_client *client = to_i2c_client(dev);
 541         struct smsc47m1_data *data = i2c_get_clientdata(client);
 542
 543         down(&data->update_lock);
 544
 545         if (time_after(jiffies, data->last_updated + HZ + HZ / 2) || init) {
 546                 int i;
 547
 548                 for (i = 0; i < 2; i++) {
 549                         data->fan[i] = smsc47m1_read_value(client,
 550                                        SMSC47M1_REG_FAN(i));
 551                         data->fan_preload[i] = smsc47m1_read_value(client,
 552                                                SMSC47M1_REG_FAN_PRELOAD(i));
 553                         data->pwm[i] = smsc47m1_read_value(client,
 554                                        SMSC47M1_REG_PWM(i));
 555                 }
 556
 557                 i = smsc47m1_read_value(client, SMSC47M1_REG_FANDIV);
 558                 data->fan_div[0] = (i >> 4) & 0x03;
 559                 data->fan_div[1] = i >> 6;
 560
 561                 data->alarms = smsc47m1_read_value(client,
 562                                SMSC47M1_REG_ALARM) >> 6;
 563                 /* Clear alarms if needed */
 564                 if (data->alarms)
 565                         smsc47m1_write_value(client, SMSC47M1_REG_ALARM, 0xC0);
 566
 567                 data->last_updated = jiffies;
 568         }
 569
 570         up(&data->update_lock);
 571         return data;
 572 }
 573
 574 static int __init sm_smsc47m1_init(void)
 575 {
 576         if (smsc47m1_find(normal_isa)) {
 577                 return -ENODEV;
 578         }
 579
 580         return i2c_add_driver(&smsc47m1_driver);
 581 }
 582
 583 static void __exit sm_smsc47m1_exit(void)
 584 {
 585         i2c_del_driver(&smsc47m1_driver);
 586 }
 587
 588 MODULE_AUTHOR("Mark D. Studebaker <mdsxyz123@yahoo.com>");
 589 MODULE_DESCRIPTION("SMSC LPC47M1xx fan sensors driver");
 590 MODULE_LICENSE("GPL");
 591
 592 module_init(sm_smsc47m1_init);
 593 module_exit(sm_smsc47m1_exit);