drivers/gpu/drm/via/via_dmablit.c

   1 /* via_dmablit.c -- PCI DMA BitBlt support for the VIA Unichrome/Pro
   2  *
   3  * Copyright (C) 2005 Thomas Hellstrom, All Rights Reserved.
   4  *
   5  * Permission is hereby granted, free of charge, to any person obtaining a
   6  * copy of this software and associated documentation files (the "Software"),
   7  * to deal in the Software without restriction, including without limitation
   8  * the rights to use, copy, modify, merge, publish, distribute, sub license,
   9  * and/or sell copies of the Software, and to permit persons to whom the
  10  * Software is furnished to do so, subject to the following conditions:
  11  *
  12  * The above copyright notice and this permission notice (including the
  13  * next paragraph) shall be included in all copies or substantial portions
  14  * of the Software.
  15  *
  16  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  17  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  18  * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
  19  * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
  20  * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
  21  * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
  22  * USE OR OTHER DEALINGS IN THE SOFTWARE.
  23  *
  24  * Authors:
  25  *    Thomas Hellstrom.
  26  *    Partially based on code obtained from Digeo Inc.
  27  */
  28
  29
  30 /*
  31  * Unmaps the DMA mappings.
  32  * FIXME: Is this a NoOp on x86? Also
  33  * FIXME: What happens if this one is called and a pending blit has previously done
  34  * the same DMA mappings?
  35  */
  36
  37 #include "drmP.h"
  38 #include "via_drm.h"
  39 #include "via_drv.h"
  40 #include "via_dmablit.h"
  41
  42 #include <linux/pagemap.h>
  43 #include <linux/slab.h>
  44
  45 #define VIA_PGDN(x)          (((unsigned long)(x)) & PAGE_MASK)
  46 #define VIA_PGOFF(x)        (((unsigned long)(x)) & ~PAGE_MASK)
  47 #define VIA_PFN(x)            ((unsigned long)(x) >> PAGE_SHIFT)
  48
  49 typedef struct _drm_via_descriptor {
  50         uint32_t mem_addr;
  51         uint32_t dev_addr;
  52         uint32_t size;
  53         uint32_t next;
  54 } drm_via_descriptor_t;
  55
  56
  57 /*
  58  * Unmap a DMA mapping.
  59  */
  60
  61
  62
  63 static void
  64 via_unmap_blit_from_device(struct pci_dev *pdev, drm_via_sg_info_t *vsg)
  65 {
  66         int num_desc = vsg->num_desc;
  67         unsigned cur_descriptor_page = num_desc / vsg->descriptors_per_page;
  68         unsigned descriptor_this_page = num_desc % vsg->descriptors_per_page;
  69         drm_via_descriptor_t *desc_ptr = vsg->desc_pages[cur_descriptor_page] +
  70                 descriptor_this_page;
  71         dma_addr_t next = vsg->chain_start;
  72
  73         while (num_desc--) {
  74                 if (descriptor_this_page-- == 0) {
  75                         cur_descriptor_page--;
  76                         descriptor_this_page = vsg->descriptors_per_page - 1;
  77                         desc_ptr = vsg->desc_pages[cur_descriptor_page] +
  78                                 descriptor_this_page;
  79                 }
  80                 dma_unmap_single(&pdev->dev, next, sizeof(*desc_ptr), DMA_TO_DEVICE);
  81                 dma_unmap_page(&pdev->dev, desc_ptr->mem_addr, desc_ptr->size, vsg->direction);
  82                 next = (dma_addr_t) desc_ptr->next;
  83                 desc_ptr--;
  84         }
  85 }
  86
  87 /*
  88  * If mode = 0, count how many descriptors are needed.
  89  * If mode = 1, Map the DMA pages for the device, put together and map also the descriptors.
  90  * Descriptors are run in reverse order by the hardware because we are not allowed to update the
  91  * 'next' field without syncing calls when the descriptor is already mapped.
  92  */
  93
  94 static void
  95 via_map_blit_for_device(struct pci_dev *pdev,
  96                    const drm_via_dmablit_t *xfer,
  97                    drm_via_sg_info_t *vsg,
  98                    int mode)
  99 {
 100         unsigned cur_descriptor_page = 0;
 101         unsigned num_descriptors_this_page = 0;
 102         unsigned char *mem_addr = xfer->mem_addr;
 103         unsigned char *cur_mem;
 104         unsigned char *first_addr = (unsigned char *)VIA_PGDN(mem_addr);
 105         uint32_t fb_addr = xfer->fb_addr;
 106         uint32_t cur_fb;
 107         unsigned long line_len;
 108         unsigned remaining_len;
 109         int num_desc = 0;
 110         int cur_line;
 111         dma_addr_t next = 0 | VIA_DMA_DPR_EC;
 112         drm_via_descriptor_t *desc_ptr = NULL;
 113
 114         if (mode == 1)
 115                 desc_ptr = vsg->desc_pages[cur_descriptor_page];
 116
 117         for (cur_line = 0; cur_line < xfer->num_lines; ++cur_line) {
 118
 119                 line_len = xfer->line_length;
 120                 cur_fb = fb_addr;
 121                 cur_mem = mem_addr;
 122
 123                 while (line_len > 0) {
 124
 125                         remaining_len = min(PAGE_SIZE-VIA_PGOFF(cur_mem), line_len);
 126                         line_len -= remaining_len;
 127
 128                         if (mode == 1) {
 129                                 desc_ptr->mem_addr =
 130                                         dma_map_page(&pdev->dev,
 131                                                      vsg->pages[VIA_PFN(cur_mem) -
 132                                                                 VIA_PFN(first_addr)],
 133                                                      VIA_PGOFF(cur_mem), remaining_len,
 134                                                      vsg->direction);
 135                                 desc_ptr->dev_addr = cur_fb;
 136
 137                                 desc_ptr->size = remaining_len;
 138                                 desc_ptr->next = (uint32_t) next;
 139                                 next = dma_map_single(&pdev->dev, desc_ptr, sizeof(*desc_ptr),
 140                                                       DMA_TO_DEVICE);
 141                                 desc_ptr++;
 142                                 if (++num_descriptors_this_page >= vsg->descriptors_per_page) {
 143                                         num_descriptors_this_page = 0;
 144                                         desc_ptr = vsg->desc_pages[++cur_descriptor_page];
 145                                 }
 146                         }
 147
 148                         num_desc++;
 149                         cur_mem += remaining_len;
 150                         cur_fb += remaining_len;
 151                 }
 152
 153                 mem_addr += xfer->mem_stride;
 154                 fb_addr += xfer->fb_stride;
 155         }
 156
 157         if (mode == 1) {
 158                 vsg->chain_start = next;
 159                 vsg->state = dr_via_device_mapped;
 160         }
 161         vsg->num_desc = num_desc;
 162 }
 163
 164 /*
 165  * Function that frees up all resources for a blit. It is usable even if the
 166  * blit info has only been partially built as long as the status enum is consistent
 167  * with the actual status of the used resources.
 168  */
 169
 170
 171 static void
 172 via_free_sg_info(struct pci_dev *pdev, drm_via_sg_info_t *vsg)
 173 {
 174         struct page *page;
 175         int i;
 176
 177         switch (vsg->state) {
 178         case dr_via_device_mapped:
 179                 via_unmap_blit_from_device(pdev, vsg);
 180         case dr_via_desc_pages_alloc:
 181                 for (i = 0; i < vsg->num_desc_pages; ++i) {
 182                         if (vsg->desc_pages[i] != NULL)
 183                                 free_page((unsigned long)vsg->desc_pages[i]);
 184                 }
 185                 kfree(vsg->desc_pages);
 186         case dr_via_pages_locked:
 187                 for (i = 0; i < vsg->num_pages; ++i) {
 188                         if (NULL != (page = vsg->pages[i])) {
 189                                 if (!PageReserved(page) && (DMA_FROM_DEVICE == vsg->direction))
 190                                         SetPageDirty(page);
 191                                 page_cache_release(page);
 192                         }
 193                 }
 194         case dr_via_pages_alloc:
 195                 vfree(vsg->pages);
 196         default:
 197                 vsg->state = dr_via_sg_init;
 198         }
 199         vfree(vsg->bounce_buffer);
 200         vsg->bounce_buffer = NULL;
 201         vsg->free_on_sequence = 0;
 202 }
 203
 204 /*
 205  * Fire a blit engine.
 206  */
 207
 208 static void
 209 via_fire_dmablit(struct drm_device *dev, drm_via_sg_info_t *vsg, int engine)
 210 {
 211         drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private;
 212
 213         VIA_WRITE(VIA_PCI_DMA_MAR0 + engine*0x10, 0);
 214         VIA_WRITE(VIA_PCI_DMA_DAR0 + engine*0x10, 0);
 215         VIA_WRITE(VIA_PCI_DMA_CSR0 + engine*0x04, VIA_DMA_CSR_DD | VIA_DMA_CSR_TD |
 216                   VIA_DMA_CSR_DE);
 217         VIA_WRITE(VIA_PCI_DMA_MR0  + engine*0x04, VIA_DMA_MR_CM | VIA_DMA_MR_TDIE);
 218         VIA_WRITE(VIA_PCI_DMA_BCR0 + engine*0x10, 0);
 219         VIA_WRITE(VIA_PCI_DMA_DPR0 + engine*0x10, vsg->chain_start);
 220         DRM_WRITEMEMORYBARRIER();
 221         VIA_WRITE(VIA_PCI_DMA_CSR0 + engine*0x04, VIA_DMA_CSR_DE | VIA_DMA_CSR_TS);
 222         VIA_READ(VIA_PCI_DMA_CSR0 + engine*0x04);
 223 }
 224
 225 /*
 226  * Obtain a page pointer array and lock all pages into system memory. A segmentation violation will
 227  * occur here if the calling user does not have access to the submitted address.
 228  */
 229
 230 static int
 231 via_lock_all_dma_pages(drm_via_sg_info_t *vsg,  drm_via_dmablit_t *xfer)
 232 {
 233         int ret;
 234         unsigned long first_pfn = VIA_PFN(xfer->mem_addr);
 235         vsg->num_pages = VIA_PFN(xfer->mem_addr + (xfer->num_lines * xfer->mem_stride - 1)) -
 236                 first_pfn + 1;
 237
 238         vsg->pages = vzalloc(sizeof(struct page *) * vsg->num_pages);
 239         if (NULL == vsg->pages)
 240                 return -ENOMEM;
 241         down_read(&current->mm->mmap_sem);
 242         ret = get_user_pages(current, current->mm,
 243                              (unsigned long)xfer->mem_addr,
 244                              vsg->num_pages,
 245                              (vsg->direction == DMA_FROM_DEVICE),
 246                              0, vsg->pages, NULL);
 247
 248         up_read(&current->mm->mmap_sem);
 249         if (ret != vsg->num_pages) {
 250                 if (ret < 0)
 251                         return ret;
 252                 vsg->state = dr_via_pages_locked;
 253                 return -EINVAL;
 254         }
 255         vsg->state = dr_via_pages_locked;
 256         DRM_DEBUG("DMA pages locked\n");
 257         return 0;
 258 }
 259
 260 /*
 261  * Allocate DMA capable memory for the blit descriptor chain, and an array that keeps track of the
 262  * pages we allocate. We don't want to use kmalloc for the descriptor chain because it may be
 263  * quite large for some blits, and pages don't need to be contingous.
 264  */
 265
 266 static int
 267 via_alloc_desc_pages(drm_via_sg_info_t *vsg)
 268 {
 269         int i;
 270
 271         vsg->descriptors_per_page = PAGE_SIZE / sizeof(drm_via_descriptor_t);
 272         vsg->num_desc_pages = (vsg->num_desc + vsg->descriptors_per_page - 1) /
 273                 vsg->descriptors_per_page;
 274
 275         if (NULL ==  (vsg->desc_pages = kcalloc(vsg->num_desc_pages, sizeof(void *), GFP_KERNEL)))
 276                 return -ENOMEM;
 277
 278         vsg->state = dr_via_desc_pages_alloc;
 279         for (i = 0; i < vsg->num_desc_pages; ++i) {
 280                 if (NULL == (vsg->desc_pages[i] =
 281                              (drm_via_descriptor_t *) __get_free_page(GFP_KERNEL)))
 282                         return -ENOMEM;
 283         }
 284         DRM_DEBUG("Allocated %d pages for %d descriptors.\n", vsg->num_desc_pages,
 285                   vsg->num_desc);
 286         return 0;
 287 }
 288
 289 static void
 290 via_abort_dmablit(struct drm_device *dev, int engine)
 291 {
 292         drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private;
 293
 294         VIA_WRITE(VIA_PCI_DMA_CSR0 + engine*0x04, VIA_DMA_CSR_TA);
 295 }
 296
 297 static void
 298 via_dmablit_engine_off(struct drm_device *dev, int engine)
 299 {
 300         drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private;
 301
 302         VIA_WRITE(VIA_PCI_DMA_CSR0 + engine*0x04, VIA_DMA_CSR_TD | VIA_DMA_CSR_DD);
 303 }
 304
 305
 306
 307 /*
 308  * The dmablit part of the IRQ handler. Trying to do only reasonably fast things here.
 309  * The rest, like unmapping and freeing memory for done blits is done in a separate workqueue
 310  * task. Basically the task of the interrupt handler is to submit a new blit to the engine, while
 311  * the workqueue task takes care of processing associated with the old blit.
 312  */
 313
 314 void
 315 via_dmablit_handler(struct drm_device *dev, int engine, int from_irq)
 316 {
 317         drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private;
 318         drm_via_blitq_t *blitq = dev_priv->blit_queues + engine;
 319         int cur;
 320         int done_transfer;
 321         unsigned long irqsave = 0;
 322         uint32_t status = 0;
 323
 324         DRM_DEBUG("DMA blit handler called. engine = %d, from_irq = %d, blitq = 0x%lx\n",
 325                   engine, from_irq, (unsigned long) blitq);
 326
 327         if (from_irq)
 328                 spin_lock(&blitq->blit_lock);
 329         else
 330                 spin_lock_irqsave(&blitq->blit_lock, irqsave);
 331
 332         done_transfer = blitq->is_active &&
 333           ((status = VIA_READ(VIA_PCI_DMA_CSR0 + engine*0x04)) & VIA_DMA_CSR_TD);
 334         done_transfer = done_transfer || (blitq->aborting && !(status & VIA_DMA_CSR_DE));
 335
 336         cur = blitq->cur;
 337         if (done_transfer) {
 338
 339                 blitq->blits[cur]->aborted = blitq->aborting;
 340                 blitq->done_blit_handle++;
 341                 DRM_WAKEUP(blitq->blit_queue + cur);
 342
 343                 cur++;
 344                 if (cur >= VIA_NUM_BLIT_SLOTS)
 345                         cur = 0;
 346                 blitq->cur = cur;
 347
 348                 /*
 349                  * Clear transfer done flag.
 350                  */
 351
 352                 VIA_WRITE(VIA_PCI_DMA_CSR0 + engine*0x04,  VIA_DMA_CSR_TD);
 353
 354                 blitq->is_active = 0;
 355                 blitq->aborting = 0;
 356                 schedule_work(&blitq->wq);
 357
 358         } else if (blitq->is_active && time_after_eq(jiffies, blitq->end)) {
 359
 360                 /*
 361                  * Abort transfer after one second.
 362                  */
 363
 364                 via_abort_dmablit(dev, engine);
 365                 blitq->aborting = 1;
 366                 blitq->end = jiffies + DRM_HZ;
 367         }
 368
 369         if (!blitq->is_active) {
 370                 if (blitq->num_outstanding) {
 371                         via_fire_dmablit(dev, blitq->blits[cur], engine);
 372                         blitq->is_active = 1;
 373                         blitq->cur = cur;
 374                         blitq->num_outstanding--;
 375                         blitq->end = jiffies + DRM_HZ;
 376                         if (!timer_pending(&blitq->poll_timer))
 377                                 mod_timer(&blitq->poll_timer, jiffies + 1);
 378                 } else {
 379                         if (timer_pending(&blitq->poll_timer))
 380                                 del_timer(&blitq->poll_timer);
 381                         via_dmablit_engine_off(dev, engine);
 382                 }
 383         }
 384
 385         if (from_irq)
 386                 spin_unlock(&blitq->blit_lock);
 387         else
 388                 spin_unlock_irqrestore(&blitq->blit_lock, irqsave);
 389 }
 390
 391
 392
 393 /*
 394  * Check whether this blit is still active, performing necessary locking.
 395  */
 396
 397 static int
 398 via_dmablit_active(drm_via_blitq_t *blitq, int engine, uint32_t handle, wait_queue_head_t **queue)
 399 {
 400         unsigned long irqsave;
 401         uint32_t slot;
 402         int active;
 403
 404         spin_lock_irqsave(&blitq->blit_lock, irqsave);
 405
 406         /*
 407          * Allow for handle wraparounds.
 408          */
 409
 410         active = ((blitq->done_blit_handle - handle) > (1 << 23)) &&
 411                 ((blitq->cur_blit_handle - handle) <= (1 << 23));
 412
 413         if (queue && active) {
 414                 slot = handle - blitq->done_blit_handle + blitq->cur - 1;
 415                 if (slot >= VIA_NUM_BLIT_SLOTS)
 416                         slot -= VIA_NUM_BLIT_SLOTS;
 417                 *queue = blitq->blit_queue + slot;
 418         }
 419
 420         spin_unlock_irqrestore(&blitq->blit_lock, irqsave);
 421
 422         return active;
 423 }
 424
 425 /*
 426  * Sync. Wait for at least three seconds for the blit to be performed.
 427  */
 428
 429 static int
 430 via_dmablit_sync(struct drm_device *dev, uint32_t handle, int engine)
 431 {
 432
 433         drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private;
 434         drm_via_blitq_t *blitq = dev_priv->blit_queues + engine;
 435         wait_queue_head_t *queue;
 436         int ret = 0;
 437
 438         if (via_dmablit_active(blitq, engine, handle, &queue)) {
 439                 DRM_WAIT_ON(ret, *queue, 3 * DRM_HZ,
 440                             !via_dmablit_active(blitq, engine, handle, NULL));
 441         }
 442         DRM_DEBUG("DMA blit sync handle 0x%x engine %d returned %d\n",
 443                   handle, engine, ret);
 444
 445         return ret;
 446 }
 447
 448
 449 /*
 450  * A timer that regularly polls the blit engine in cases where we don't have interrupts:
 451  * a) Broken hardware (typically those that don't have any video capture facility).
 452  * b) Blit abort. The hardware doesn't send an interrupt when a blit is aborted.
 453  * The timer and hardware IRQ's can and do work in parallel. If the hardware has
 454  * irqs, it will shorten the latency somewhat.
 455  */
 456
 457
 458
 459 static void
 460 via_dmablit_timer(unsigned long data)
 461 {
 462         drm_via_blitq_t *blitq = (drm_via_blitq_t *) data;
 463         struct drm_device *dev = blitq->dev;
 464         int engine = (int)
 465                 (blitq - ((drm_via_private_t *)dev->dev_private)->blit_queues);
 466
 467         DRM_DEBUG("Polling timer called for engine %d, jiffies %lu\n", engine,
 468                   (unsigned long) jiffies);
 469
 470         via_dmablit_handler(dev, engine, 0);
 471
 472         if (!timer_pending(&blitq->poll_timer)) {
 473                 mod_timer(&blitq->poll_timer, jiffies + 1);
 474
 475                /*
 476                 * Rerun handler to delete timer if engines are off, and
 477                 * to shorten abort latency. This is a little nasty.
 478                 */
 479
 480                via_dmablit_handler(dev, engine, 0);
 481
 482         }
 483 }
 484
 485
 486
 487
 488 /*
 489  * Workqueue task that frees data and mappings associated with a blit.
 490  * Also wakes up waiting processes. Each of these tasks handles one
 491  * blit engine only and may not be called on each interrupt.
 492  */
 493
 494
 495 static void
 496 via_dmablit_workqueue(struct work_struct *work)
 497 {
 498         drm_via_blitq_t *blitq = container_of(work, drm_via_blitq_t, wq);
 499         struct drm_device *dev = blitq->dev;
 500         unsigned long irqsave;
 501         drm_via_sg_info_t *cur_sg;
 502         int cur_released;
 503
 504
 505         DRM_DEBUG("Workqueue task called for blit engine %ld\n", (unsigned long)
 506                   (blitq - ((drm_via_private_t *)dev->dev_private)->blit_queues));
 507
 508         spin_lock_irqsave(&blitq->blit_lock, irqsave);
 509
 510         while (blitq->serviced != blitq->cur) {
 511
 512                 cur_released = blitq->serviced++;
 513
 514                 DRM_DEBUG("Releasing blit slot %d\n", cur_released);
 515
 516                 if (blitq->serviced >= VIA_NUM_BLIT_SLOTS)
 517                         blitq->serviced = 0;
 518
 519                 cur_sg = blitq->blits[cur_released];
 520                 blitq->num_free++;
 521
 522                 spin_unlock_irqrestore(&blitq->blit_lock, irqsave);
 523
 524                 DRM_WAKEUP(&blitq->busy_queue);
 525
 526                 via_free_sg_info(dev->pdev, cur_sg);
 527                 kfree(cur_sg);
 528
 529                 spin_lock_irqsave(&blitq->blit_lock, irqsave);
 530         }
 531
 532         spin_unlock_irqrestore(&blitq->blit_lock, irqsave);
 533 }
 534
 535
 536 /*
 537  * Init all blit engines. Currently we use two, but some hardware have 4.
 538  */
 539
 540
 541 void
 542 via_init_dmablit(struct drm_device *dev)
 543 {
 544         int i, j;
 545         drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private;
 546         drm_via_blitq_t *blitq;
 547
 548         pci_set_master(dev->pdev);
 549
 550         for (i = 0; i < VIA_NUM_BLIT_ENGINES; ++i) {
 551                 blitq = dev_priv->blit_queues + i;
 552                 blitq->dev = dev;
 553                 blitq->cur_blit_handle = 0;
 554                 blitq->done_blit_handle = 0;
 555                 blitq->head = 0;
 556                 blitq->cur = 0;
 557                 blitq->serviced = 0;
 558                 blitq->num_free = VIA_NUM_BLIT_SLOTS - 1;
 559                 blitq->num_outstanding = 0;
 560                 blitq->is_active = 0;
 561                 blitq->aborting = 0;
 562                 spin_lock_init(&blitq->blit_lock);
 563                 for (j = 0; j < VIA_NUM_BLIT_SLOTS; ++j)
 564                         DRM_INIT_WAITQUEUE(blitq->blit_queue + j);
 565                 DRM_INIT_WAITQUEUE(&blitq->busy_queue);
 566                 INIT_WORK(&blitq->wq, via_dmablit_workqueue);
 567                 setup_timer(&blitq->poll_timer, via_dmablit_timer,
 568                                 (unsigned long)blitq);
 569         }
 570 }
 571
 572 /*
 573  * Build all info and do all mappings required for a blit.
 574  */
 575
 576
 577 static int
 578 via_build_sg_info(struct drm_device *dev, drm_via_sg_info_t *vsg, drm_via_dmablit_t *xfer)
 579 {
 580         int draw = xfer->to_fb;
 581         int ret = 0;
 582
 583         vsg->direction = (draw) ? DMA_TO_DEVICE : DMA_FROM_DEVICE;
 584         vsg->bounce_buffer = NULL;
 585
 586         vsg->state = dr_via_sg_init;
 587
 588         if (xfer->num_lines <= 0 || xfer->line_length <= 0) {
 589                 DRM_ERROR("Zero size bitblt.\n");
 590                 return -EINVAL;
 591         }
 592
 593         /*
 594          * Below check is a driver limitation, not a hardware one. We
 595          * don't want to lock unused pages, and don't want to incoporate the
 596          * extra logic of avoiding them. Make sure there are no.
 597          * (Not a big limitation anyway.)
 598          */
 599
 600         if ((xfer->mem_stride - xfer->line_length) > 2*PAGE_SIZE) {
 601                 DRM_ERROR("Too large system memory stride. Stride: %d, "
 602                           "Length: %d\n", xfer->mem_stride, xfer->line_length);
 603                 return -EINVAL;
 604         }
 605
 606         if ((xfer->mem_stride == xfer->line_length) &&
 607            (xfer->fb_stride == xfer->line_length)) {
 608                 xfer->mem_stride *= xfer->num_lines;
 609                 xfer->line_length = xfer->mem_stride;
 610                 xfer->fb_stride = xfer->mem_stride;
 611                 xfer->num_lines = 1;
 612         }
 613
 614         /*
 615          * Don't lock an arbitrary large number of pages, since that causes a
 616          * DOS security hole.
 617          */
 618
 619         if (xfer->num_lines > 2048 || (xfer->num_lines*xfer->mem_stride > (2048*2048*4))) {
 620                 DRM_ERROR("Too large PCI DMA bitblt.\n");
 621                 return -EINVAL;
 622         }
 623
 624         /*
 625          * we allow a negative fb stride to allow flipping of images in
 626          * transfer.
 627          */
 628
 629         if (xfer->mem_stride < xfer->line_length ||
 630                 abs(xfer->fb_stride) < xfer->line_length) {
 631                 DRM_ERROR("Invalid frame-buffer / memory stride.\n");
 632                 return -EINVAL;
 633         }
 634
 635         /*
 636          * A hardware bug seems to be worked around if system memory addresses start on
 637          * 16 byte boundaries. This seems a bit restrictive however. VIA is contacted
 638          * about this. Meanwhile, impose the following restrictions:
 639          */
 640
 641 #ifdef VIA_BUGFREE
 642         if ((((unsigned long)xfer->mem_addr & 3) != ((unsigned long)xfer->fb_addr & 3)) ||
 643             ((xfer->num_lines > 1) && ((xfer->mem_stride & 3) != (xfer->fb_stride & 3)))) {
 644                 DRM_ERROR("Invalid DRM bitblt alignment.\n");
 645                 return -EINVAL;
 646         }
 647 #else
 648         if ((((unsigned long)xfer->mem_addr & 15) ||
 649               ((unsigned long)xfer->fb_addr & 3)) ||
 650            ((xfer->num_lines > 1) &&
 651            ((xfer->mem_stride & 15) || (xfer->fb_stride & 3)))) {
 652                 DRM_ERROR("Invalid DRM bitblt alignment.\n");
 653                 return -EINVAL;
 654         }
 655 #endif
 656
 657         if (0 != (ret = via_lock_all_dma_pages(vsg, xfer))) {
 658                 DRM_ERROR("Could not lock DMA pages.\n");
 659                 via_free_sg_info(dev->pdev, vsg);
 660                 return ret;
 661         }
 662
 663         via_map_blit_for_device(dev->pdev, xfer, vsg, 0);
 664         if (0 != (ret = via_alloc_desc_pages(vsg))) {
 665                 DRM_ERROR("Could not allocate DMA descriptor pages.\n");
 666                 via_free_sg_info(dev->pdev, vsg);
 667                 return ret;
 668         }
 669         via_map_blit_for_device(dev->pdev, xfer, vsg, 1);
 670
 671         return 0;
 672 }
 673
 674
 675 /*
 676  * Reserve one free slot in the blit queue. Will wait for one second for one
 677  * to become available. Otherwise -EBUSY is returned.
 678  */
 679
 680 static int
 681 via_dmablit_grab_slot(drm_via_blitq_t *blitq, int engine)
 682 {
 683         int ret = 0;
 684         unsigned long irqsave;
 685
 686         DRM_DEBUG("Num free is %d\n", blitq->num_free);
 687         spin_lock_irqsave(&blitq->blit_lock, irqsave);
 688         while (blitq->num_free == 0) {
 689                 spin_unlock_irqrestore(&blitq->blit_lock, irqsave);
 690
 691                 DRM_WAIT_ON(ret, blitq->busy_queue, DRM_HZ, blitq->num_free > 0);
 692                 if (ret)
 693                         return (-EINTR == ret) ? -EAGAIN : ret;
 694
 695                 spin_lock_irqsave(&blitq->blit_lock, irqsave);
 696         }
 697
 698         blitq->num_free--;
 699         spin_unlock_irqrestore(&blitq->blit_lock, irqsave);
 700
 701         return 0;
 702 }
 703
 704 /*
 705  * Hand back a free slot if we changed our mind.
 706  */
 707
 708 static void
 709 via_dmablit_release_slot(drm_via_blitq_t *blitq)
 710 {
 711         unsigned long irqsave;
 712
 713         spin_lock_irqsave(&blitq->blit_lock, irqsave);
 714         blitq->num_free++;
 715         spin_unlock_irqrestore(&blitq->blit_lock, irqsave);
 716         DRM_WAKEUP(&blitq->busy_queue);
 717 }
 718
 719 /*
 720  * Grab a free slot. Build blit info and queue a blit.
 721  */
 722
 723
 724 static int
 725 via_dmablit(struct drm_device *dev, drm_via_dmablit_t *xfer)
 726 {
 727         drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private;
 728         drm_via_sg_info_t *vsg;
 729         drm_via_blitq_t *blitq;
 730         int ret;
 731         int engine;
 732         unsigned long irqsave;
 733
 734         if (dev_priv == NULL) {
 735                 DRM_ERROR("Called without initialization.\n");
 736                 return -EINVAL;
 737         }
 738
 739         engine = (xfer->to_fb) ? 0 : 1;
 740         blitq = dev_priv->blit_queues + engine;
 741         if (0 != (ret = via_dmablit_grab_slot(blitq, engine)))
 742                 return ret;
 743         if (NULL == (vsg = kmalloc(sizeof(*vsg), GFP_KERNEL))) {
 744                 via_dmablit_release_slot(blitq);
 745                 return -ENOMEM;
 746         }
 747         if (0 != (ret = via_build_sg_info(dev, vsg, xfer))) {
 748                 via_dmablit_release_slot(blitq);
 749                 kfree(vsg);
 750                 return ret;
 751         }
 752         spin_lock_irqsave(&blitq->blit_lock, irqsave);
 753
 754         blitq->blits[blitq->head++] = vsg;
 755         if (blitq->head >= VIA_NUM_BLIT_SLOTS)
 756                 blitq->head = 0;
 757         blitq->num_outstanding++;
 758         xfer->sync.sync_handle = ++blitq->cur_blit_handle;
 759
 760         spin_unlock_irqrestore(&blitq->blit_lock, irqsave);
 761         xfer->sync.engine = engine;
 762
 763         via_dmablit_handler(dev, engine, 0);
 764
 765         return 0;
 766 }
 767
 768 /*
 769  * Sync on a previously submitted blit. Note that the X server use signals extensively, and
 770  * that there is a very big probability that this IOCTL will be interrupted by a signal. In that
 771  * case it returns with -EAGAIN for the signal to be delivered.
 772  * The caller should then reissue the IOCTL. This is similar to what is being done for drmGetLock().
 773  */
 774
 775 int
 776 via_dma_blit_sync(struct drm_device *dev, void *data, struct drm_file *file_priv)
 777 {
 778         drm_via_blitsync_t *sync = data;
 779         int err;
 780
 781         if (sync->engine >= VIA_NUM_BLIT_ENGINES)
 782                 return -EINVAL;
 783
 784         err = via_dmablit_sync(dev, sync->sync_handle, sync->engine);
 785
 786         if (-EINTR == err)
 787                 err = -EAGAIN;
 788
 789         return err;
 790 }
 791
 792
 793 /*
 794  * Queue a blit and hand back a handle to be used for sync. This IOCTL may be interrupted by a signal
 795  * while waiting for a free slot in the blit queue. In that case it returns with -EAGAIN and should
 796  * be reissued. See the above IOCTL code.
 797  */
 798
 799 int
 800 via_dma_blit(struct drm_device *dev, void *data, struct drm_file *file_priv)
 801 {
 802         drm_via_dmablit_t *xfer = data;
 803         int err;
 804
 805         err = via_dmablit(dev, xfer);
 806
 807         return err;
 808 }