drivers/gpu/drm/i915/intel_crt.c

   1 /*
   2  * Copyright © 2006-2007 Intel Corporation
   3  *
   4  * Permission is hereby granted, free of charge, to any person obtaining a
   5  * copy of this software and associated documentation files (the "Software"),
   6  * to deal in the Software without restriction, including without limitation
   7  * the rights to use, copy, modify, merge, publish, distribute, sublicense,
   8  * and/or sell copies of the Software, and to permit persons to whom the
   9  * Software is furnished to do so, subject to the following conditions:
  10  *
  11  * The above copyright notice and this permission notice (including the next
  12  * paragraph) shall be included in all copies or substantial portions of the
  13  * Software.
  14  *
  15  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  16  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  17  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
  18  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  19  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  20  * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
  21  * DEALINGS IN THE SOFTWARE.
  22  *
  23  * Authors:
  24  *      Eric Anholt <eric@anholt.net>
  25  */
  26
  27 #include <linux/i2c.h>
  28 #include <linux/slab.h>
  29 #include "drmP.h"
  30 #include "drm.h"
  31 #include "drm_crtc.h"
  32 #include "drm_crtc_helper.h"
  33 #include "drm_edid.h"
  34 #include "intel_drv.h"
  35 #include "i915_drm.h"
  36 #include "i915_drv.h"
  37
  38 /* Here's the desired hotplug mode */
  39 #define ADPA_HOTPLUG_BITS (ADPA_CRT_HOTPLUG_PERIOD_128 |                \
  40                            ADPA_CRT_HOTPLUG_WARMUP_10MS |               \
  41                            ADPA_CRT_HOTPLUG_SAMPLE_4S |                 \
  42                            ADPA_CRT_HOTPLUG_VOLTAGE_50 |                \
  43                            ADPA_CRT_HOTPLUG_VOLREF_325MV |              \
  44                            ADPA_CRT_HOTPLUG_ENABLE)
  45
  46 struct intel_crt {
  47         struct intel_encoder base;
  48         bool force_hotplug_required;
  49 };
  50
  51 static struct intel_crt *intel_attached_crt(struct drm_connector *connector)
  52 {
  53         return container_of(intel_attached_encoder(connector),
  54                             struct intel_crt, base);
  55 }
  56
  57 static void intel_crt_dpms(struct drm_encoder *encoder, int mode)
  58 {
  59         struct drm_device *dev = encoder->dev;
  60         struct drm_i915_private *dev_priv = dev->dev_private;
  61         u32 temp, reg;
  62
  63         if (HAS_PCH_SPLIT(dev))
  64                 reg = PCH_ADPA;
  65         else
  66                 reg = ADPA;
  67
  68         temp = I915_READ(reg);
  69         temp &= ~(ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE);
  70         temp &= ~ADPA_DAC_ENABLE;
  71
  72         switch(mode) {
  73         case DRM_MODE_DPMS_ON:
  74                 temp |= ADPA_DAC_ENABLE;
  75                 break;
  76         case DRM_MODE_DPMS_STANDBY:
  77                 temp |= ADPA_DAC_ENABLE | ADPA_HSYNC_CNTL_DISABLE;
  78                 break;
  79         case DRM_MODE_DPMS_SUSPEND:
  80                 temp |= ADPA_DAC_ENABLE | ADPA_VSYNC_CNTL_DISABLE;
  81                 break;
  82         case DRM_MODE_DPMS_OFF:
  83                 temp |= ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE;
  84                 break;
  85         }
  86
  87         I915_WRITE(reg, temp);
  88 }
  89
  90 static int intel_crt_mode_valid(struct drm_connector *connector,
  91                                 struct drm_display_mode *mode)
  92 {
  93         struct drm_device *dev = connector->dev;
  94
  95         int max_clock = 0;
  96         if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
  97                 return MODE_NO_DBLESCAN;
  98
  99         if (mode->clock < 25000)
 100                 return MODE_CLOCK_LOW;
 101
 102         if (IS_GEN2(dev))
 103                 max_clock = 350000;
 104         else
 105                 max_clock = 400000;
 106         if (mode->clock > max_clock)
 107                 return MODE_CLOCK_HIGH;
 108
 109         return MODE_OK;
 110 }
 111
 112 static bool intel_crt_mode_fixup(struct drm_encoder *encoder,
 113                                  struct drm_display_mode *mode,
 114                                  struct drm_display_mode *adjusted_mode)
 115 {
 116         return true;
 117 }
 118
 119 static void intel_crt_mode_set(struct drm_encoder *encoder,
 120                                struct drm_display_mode *mode,
 121                                struct drm_display_mode *adjusted_mode)
 122 {
 123
 124         struct drm_device *dev = encoder->dev;
 125         struct drm_crtc *crtc = encoder->crtc;
 126         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 127         struct drm_i915_private *dev_priv = dev->dev_private;
 128         int dpll_md_reg;
 129         u32 adpa, dpll_md;
 130         u32 adpa_reg;
 131
 132         dpll_md_reg = DPLL_MD(intel_crtc->pipe);
 133
 134         if (HAS_PCH_SPLIT(dev))
 135                 adpa_reg = PCH_ADPA;
 136         else
 137                 adpa_reg = ADPA;
 138
 139         /*
 140          * Disable separate mode multiplier used when cloning SDVO to CRT
 141          * XXX this needs to be adjusted when we really are cloning
 142          */
 143         if (INTEL_INFO(dev)->gen >= 4 && !HAS_PCH_SPLIT(dev)) {
 144                 dpll_md = I915_READ(dpll_md_reg);
 145                 I915_WRITE(dpll_md_reg,
 146                            dpll_md & ~DPLL_MD_UDI_MULTIPLIER_MASK);
 147         }
 148
 149         adpa = ADPA_HOTPLUG_BITS;
 150         if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
 151                 adpa |= ADPA_HSYNC_ACTIVE_HIGH;
 152         if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
 153                 adpa |= ADPA_VSYNC_ACTIVE_HIGH;
 154
 155         if (intel_crtc->pipe == 0) {
 156                 if (HAS_PCH_CPT(dev))
 157                         adpa |= PORT_TRANS_A_SEL_CPT;
 158                 else
 159                         adpa |= ADPA_PIPE_A_SELECT;
 160         } else {
 161                 if (HAS_PCH_CPT(dev))
 162                         adpa |= PORT_TRANS_B_SEL_CPT;
 163                 else
 164                         adpa |= ADPA_PIPE_B_SELECT;
 165         }
 166
 167         if (!HAS_PCH_SPLIT(dev))
 168                 I915_WRITE(BCLRPAT(intel_crtc->pipe), 0);
 169
 170         I915_WRITE(adpa_reg, adpa);
 171 }
 172
 173 static bool intel_ironlake_crt_detect_hotplug(struct drm_connector *connector)
 174 {
 175         struct drm_device *dev = connector->dev;
 176         struct intel_crt *crt = intel_attached_crt(connector);
 177         struct drm_i915_private *dev_priv = dev->dev_private;
 178         u32 adpa;
 179         bool ret;
 180
 181         /* The first time through, trigger an explicit detection cycle */
 182         if (crt->force_hotplug_required) {
 183                 bool turn_off_dac = HAS_PCH_SPLIT(dev);
 184                 u32 save_adpa;
 185
 186                 crt->force_hotplug_required = 0;
 187
 188                 save_adpa = adpa = I915_READ(PCH_ADPA);
 189                 DRM_DEBUG_KMS("trigger hotplug detect cycle: adpa=0x%x\n", adpa);
 190
 191                 adpa |= ADPA_CRT_HOTPLUG_FORCE_TRIGGER;
 192                 if (turn_off_dac)
 193                         adpa &= ~ADPA_DAC_ENABLE;
 194
 195                 I915_WRITE(PCH_ADPA, adpa);
 196
 197                 if (wait_for((I915_READ(PCH_ADPA) & ADPA_CRT_HOTPLUG_FORCE_TRIGGER) == 0,
 198                              1000))
 199                         DRM_DEBUG_KMS("timed out waiting for FORCE_TRIGGER");
 200
 201                 if (turn_off_dac) {
 202                         I915_WRITE(PCH_ADPA, save_adpa);
 203                         POSTING_READ(PCH_ADPA);
 204                 }
 205         }
 206
 207         /* Check the status to see if both blue and green are on now */
 208         adpa = I915_READ(PCH_ADPA);
 209         if ((adpa & ADPA_CRT_HOTPLUG_MONITOR_MASK) != 0)
 210                 ret = true;
 211         else
 212                 ret = false;
 213         DRM_DEBUG_KMS("ironlake hotplug adpa=0x%x, result %d\n", adpa, ret);
 214
 215         return ret;
 216 }
 217
 218 /**
 219  * Uses CRT_HOTPLUG_EN and CRT_HOTPLUG_STAT to detect CRT presence.
 220  *
 221  * Not for i915G/i915GM
 222  *
 223  * \return true if CRT is connected.
 224  * \return false if CRT is disconnected.
 225  */
 226 static bool intel_crt_detect_hotplug(struct drm_connector *connector)
 227 {
 228         struct drm_device *dev = connector->dev;
 229         struct drm_i915_private *dev_priv = dev->dev_private;
 230         u32 hotplug_en, orig, stat;
 231         bool ret = false;
 232         int i, tries = 0;
 233
 234         if (HAS_PCH_SPLIT(dev))
 235                 return intel_ironlake_crt_detect_hotplug(connector);
 236
 237         /*
 238          * On 4 series desktop, CRT detect sequence need to be done twice
 239          * to get a reliable result.
 240          */
 241
 242         if (IS_G4X(dev) && !IS_GM45(dev))
 243                 tries = 2;
 244         else
 245                 tries = 1;
 246         hotplug_en = orig = I915_READ(PORT_HOTPLUG_EN);
 247         hotplug_en |= CRT_HOTPLUG_FORCE_DETECT;
 248
 249         for (i = 0; i < tries ; i++) {
 250                 /* turn on the FORCE_DETECT */
 251                 I915_WRITE(PORT_HOTPLUG_EN, hotplug_en);
 252                 /* wait for FORCE_DETECT to go off */
 253                 if (wait_for((I915_READ(PORT_HOTPLUG_EN) &
 254                               CRT_HOTPLUG_FORCE_DETECT) == 0,
 255                              1000))
 256                         DRM_DEBUG_KMS("timed out waiting for FORCE_DETECT to go off");
 257         }
 258
 259         stat = I915_READ(PORT_HOTPLUG_STAT);
 260         if ((stat & CRT_HOTPLUG_MONITOR_MASK) != CRT_HOTPLUG_MONITOR_NONE)
 261                 ret = true;
 262
 263         /* clear the interrupt we just generated, if any */
 264         I915_WRITE(PORT_HOTPLUG_STAT, CRT_HOTPLUG_INT_STATUS);
 265
 266         /* and put the bits back */
 267         I915_WRITE(PORT_HOTPLUG_EN, orig);
 268
 269         return ret;
 270 }
 271
 272 static bool intel_crt_detect_ddc(struct drm_connector *connector)
 273 {
 274         struct intel_crt *crt = intel_attached_crt(connector);
 275         struct drm_i915_private *dev_priv = crt->base.base.dev->dev_private;
 276
 277         /* CRT should always be at 0, but check anyway */
 278         if (crt->base.type != INTEL_OUTPUT_ANALOG)
 279                 return false;
 280
 281         if (intel_ddc_probe(&crt->base, dev_priv->crt_ddc_pin)) {
 282                 struct edid *edid;
 283                 bool is_digital = false;
 284
 285                 edid = drm_get_edid(connector,
 286                         &dev_priv->gmbus[dev_priv->crt_ddc_pin].adapter);
 287                 /*
 288                  * This may be a DVI-I connector with a shared DDC
 289                  * link between analog and digital outputs, so we
 290                  * have to check the EDID input spec of the attached device.
 291                  *
 292                  * On the other hand, what should we do if it is a broken EDID?
 293                  */
 294                 if (edid != NULL) {
 295                         is_digital = edid->input & DRM_EDID_INPUT_DIGITAL;
 296                         connector->display_info.raw_edid = NULL;
 297                         kfree(edid);
 298                 }
 299
 300                 if (!is_digital) {
 301                         DRM_DEBUG_KMS("CRT detected via DDC:0x50 [EDID]\n");
 302                         return true;
 303                 } else {
 304                         DRM_DEBUG_KMS("CRT not detected via DDC:0x50 [EDID reports a digital panel]\n");
 305                 }
 306         }
 307
 308         return false;
 309 }
 310
 311 static enum drm_connector_status
 312 intel_crt_load_detect(struct intel_crt *crt)
 313 {
 314         struct drm_device *dev = crt->base.base.dev;
 315         struct drm_i915_private *dev_priv = dev->dev_private;
 316         uint32_t pipe = to_intel_crtc(crt->base.base.crtc)->pipe;
 317         uint32_t save_bclrpat;
 318         uint32_t save_vtotal;
 319         uint32_t vtotal, vactive;
 320         uint32_t vsample;
 321         uint32_t vblank, vblank_start, vblank_end;
 322         uint32_t dsl;
 323         uint32_t bclrpat_reg;
 324         uint32_t vtotal_reg;
 325         uint32_t vblank_reg;
 326         uint32_t vsync_reg;
 327         uint32_t pipeconf_reg;
 328         uint32_t pipe_dsl_reg;
 329         uint8_t st00;
 330         enum drm_connector_status status;
 331
 332         DRM_DEBUG_KMS("starting load-detect on CRT\n");
 333
 334         bclrpat_reg = BCLRPAT(pipe);
 335         vtotal_reg = VTOTAL(pipe);
 336         vblank_reg = VBLANK(pipe);
 337         vsync_reg = VSYNC(pipe);
 338         pipeconf_reg = PIPECONF(pipe);
 339         pipe_dsl_reg = PIPEDSL(pipe);
 340
 341         save_bclrpat = I915_READ(bclrpat_reg);
 342         save_vtotal = I915_READ(vtotal_reg);
 343         vblank = I915_READ(vblank_reg);
 344
 345         vtotal = ((save_vtotal >> 16) & 0xfff) + 1;
 346         vactive = (save_vtotal & 0x7ff) + 1;
 347
 348         vblank_start = (vblank & 0xfff) + 1;
 349         vblank_end = ((vblank >> 16) & 0xfff) + 1;
 350
 351         /* Set the border color to purple. */
 352         I915_WRITE(bclrpat_reg, 0x500050);
 353
 354         if (!IS_GEN2(dev)) {
 355                 uint32_t pipeconf = I915_READ(pipeconf_reg);
 356                 I915_WRITE(pipeconf_reg, pipeconf | PIPECONF_FORCE_BORDER);
 357                 POSTING_READ(pipeconf_reg);
 358                 /* Wait for next Vblank to substitue
 359                  * border color for Color info */
 360                 intel_wait_for_vblank(dev, pipe);
 361                 st00 = I915_READ8(VGA_MSR_WRITE);
 362                 status = ((st00 & (1 << 4)) != 0) ?
 363                         connector_status_connected :
 364                         connector_status_disconnected;
 365
 366                 I915_WRITE(pipeconf_reg, pipeconf);
 367         } else {
 368                 bool restore_vblank = false;
 369                 int count, detect;
 370
 371                 /*
 372                 * If there isn't any border, add some.
 373                 * Yes, this will flicker
 374                 */
 375                 if (vblank_start <= vactive && vblank_end >= vtotal) {
 376                         uint32_t vsync = I915_READ(vsync_reg);
 377                         uint32_t vsync_start = (vsync & 0xffff) + 1;
 378
 379                         vblank_start = vsync_start;
 380                         I915_WRITE(vblank_reg,
 381                                    (vblank_start - 1) |
 382                                    ((vblank_end - 1) << 16));
 383                         restore_vblank = true;
 384                 }
 385                 /* sample in the vertical border, selecting the larger one */
 386                 if (vblank_start - vactive >= vtotal - vblank_end)
 387                         vsample = (vblank_start + vactive) >> 1;
 388                 else
 389                         vsample = (vtotal + vblank_end) >> 1;
 390
 391                 /*
 392                  * Wait for the border to be displayed
 393                  */
 394                 while (I915_READ(pipe_dsl_reg) >= vactive)
 395                         ;
 396                 while ((dsl = I915_READ(pipe_dsl_reg)) <= vsample)
 397                         ;
 398                 /*
 399                  * Watch ST00 for an entire scanline
 400                  */
 401                 detect = 0;
 402                 count = 0;
 403                 do {
 404                         count++;
 405                         /* Read the ST00 VGA status register */
 406                         st00 = I915_READ8(VGA_MSR_WRITE);
 407                         if (st00 & (1 << 4))
 408                                 detect++;
 409                 } while ((I915_READ(pipe_dsl_reg) == dsl));
 410
 411                 /* restore vblank if necessary */
 412                 if (restore_vblank)
 413                         I915_WRITE(vblank_reg, vblank);
 414                 /*
 415                  * If more than 3/4 of the scanline detected a monitor,
 416                  * then it is assumed to be present. This works even on i830,
 417                  * where there isn't any way to force the border color across
 418                  * the screen
 419                  */
 420                 status = detect * 4 > count * 3 ?
 421                          connector_status_connected :
 422                          connector_status_disconnected;
 423         }
 424
 425         /* Restore previous settings */
 426         I915_WRITE(bclrpat_reg, save_bclrpat);
 427
 428         return status;
 429 }
 430
 431 static enum drm_connector_status
 432 intel_crt_detect(struct drm_connector *connector, bool force)
 433 {
 434         struct drm_device *dev = connector->dev;
 435         struct intel_crt *crt = intel_attached_crt(connector);
 436         struct drm_crtc *crtc;
 437         enum drm_connector_status status;
 438
 439         if (I915_HAS_HOTPLUG(dev)) {
 440                 if (intel_crt_detect_hotplug(connector)) {
 441                         DRM_DEBUG_KMS("CRT detected via hotplug\n");
 442                         return connector_status_connected;
 443                 } else {
 444                         DRM_DEBUG_KMS("CRT not detected via hotplug\n");
 445                         return connector_status_disconnected;
 446                 }
 447         }
 448
 449         if (intel_crt_detect_ddc(connector))
 450                 return connector_status_connected;
 451
 452         if (!force)
 453                 return connector->status;
 454
 455         /* for pre-945g platforms use load detect */
 456         crtc = crt->base.base.crtc;
 457         if (crtc && crtc->enabled) {
 458                 status = intel_crt_load_detect(crt);
 459         } else {
 460                 struct intel_load_detect_pipe tmp;
 461
 462                 if (intel_get_load_detect_pipe(&crt->base, connector, NULL,
 463                                                &tmp)) {
 464                         if (intel_crt_detect_ddc(connector))
 465                                 status = connector_status_connected;
 466                         else
 467                                 status = intel_crt_load_detect(crt);
 468                         intel_release_load_detect_pipe(&crt->base, connector,
 469                                                        &tmp);
 470                 } else
 471                         status = connector_status_unknown;
 472         }
 473
 474         return status;
 475 }
 476
 477 static void intel_crt_destroy(struct drm_connector *connector)
 478 {
 479         drm_sysfs_connector_remove(connector);
 480         drm_connector_cleanup(connector);
 481         kfree(connector);
 482 }
 483
 484 static int intel_crt_get_modes(struct drm_connector *connector)
 485 {
 486         struct drm_device *dev = connector->dev;
 487         struct drm_i915_private *dev_priv = dev->dev_private;
 488         int ret;
 489
 490         ret = intel_ddc_get_modes(connector,
 491                                  &dev_priv->gmbus[dev_priv->crt_ddc_pin].adapter);
 492         if (ret || !IS_G4X(dev))
 493                 return ret;
 494
 495         /* Try to probe digital port for output in DVI-I -> VGA mode. */
 496         return intel_ddc_get_modes(connector,
 497                                    &dev_priv->gmbus[GMBUS_PORT_DPB].adapter);
 498 }
 499
 500 static int intel_crt_set_property(struct drm_connector *connector,
 501                                   struct drm_property *property,
 502                                   uint64_t value)
 503 {
 504         return 0;
 505 }
 506
 507 static void intel_crt_reset(struct drm_connector *connector)
 508 {
 509         struct drm_device *dev = connector->dev;
 510         struct intel_crt *crt = intel_attached_crt(connector);
 511
 512         if (HAS_PCH_SPLIT(dev))
 513                 crt->force_hotplug_required = 1;
 514 }
 515
 516 /*
 517  * Routines for controlling stuff on the analog port
 518  */
 519
 520 static const struct drm_encoder_helper_funcs intel_crt_helper_funcs = {
 521         .dpms = intel_crt_dpms,
 522         .mode_fixup = intel_crt_mode_fixup,
 523         .prepare = intel_encoder_prepare,
 524         .commit = intel_encoder_commit,
 525         .mode_set = intel_crt_mode_set,
 526 };
 527
 528 static const struct drm_connector_funcs intel_crt_connector_funcs = {
 529         .reset = intel_crt_reset,
 530         .dpms = drm_helper_connector_dpms,
 531         .detect = intel_crt_detect,
 532         .fill_modes = drm_helper_probe_single_connector_modes,
 533         .destroy = intel_crt_destroy,
 534         .set_property = intel_crt_set_property,
 535 };
 536
 537 static const struct drm_connector_helper_funcs intel_crt_connector_helper_funcs = {
 538         .mode_valid = intel_crt_mode_valid,
 539         .get_modes = intel_crt_get_modes,
 540         .best_encoder = intel_best_encoder,
 541 };
 542
 543 static const struct drm_encoder_funcs intel_crt_enc_funcs = {
 544         .destroy = intel_encoder_destroy,
 545 };
 546
 547 void intel_crt_init(struct drm_device *dev)
 548 {
 549         struct drm_connector *connector;
 550         struct intel_crt *crt;
 551         struct intel_connector *intel_connector;
 552         struct drm_i915_private *dev_priv = dev->dev_private;
 553
 554         crt = kzalloc(sizeof(struct intel_crt), GFP_KERNEL);
 555         if (!crt)
 556                 return;
 557
 558         intel_connector = kzalloc(sizeof(struct intel_connector), GFP_KERNEL);
 559         if (!intel_connector) {
 560                 kfree(crt);
 561                 return;
 562         }
 563
 564         connector = &intel_connector->base;
 565         drm_connector_init(dev, &intel_connector->base,
 566                            &intel_crt_connector_funcs, DRM_MODE_CONNECTOR_VGA);
 567
 568         drm_encoder_init(dev, &crt->base.base, &intel_crt_enc_funcs,
 569                          DRM_MODE_ENCODER_DAC);
 570
 571         intel_connector_attach_encoder(intel_connector, &crt->base);
 572
 573         crt->base.type = INTEL_OUTPUT_ANALOG;
 574         crt->base.clone_mask = (1 << INTEL_SDVO_NON_TV_CLONE_BIT |
 575                                 1 << INTEL_ANALOG_CLONE_BIT |
 576                                 1 << INTEL_SDVO_LVDS_CLONE_BIT);
 577         crt->base.crtc_mask = (1 << 0) | (1 << 1);
 578         connector->interlace_allowed = 1;
 579         connector->doublescan_allowed = 0;
 580
 581         drm_encoder_helper_add(&crt->base.base, &intel_crt_helper_funcs);
 582         drm_connector_helper_add(connector, &intel_crt_connector_helper_funcs);
 583
 584         drm_sysfs_connector_add(connector);
 585
 586         if (I915_HAS_HOTPLUG(dev))
 587                 connector->polled = DRM_CONNECTOR_POLL_HPD;
 588         else
 589                 connector->polled = DRM_CONNECTOR_POLL_CONNECT;
 590
 591         /*
 592          * Configure the automatic hotplug detection stuff
 593          */
 594         crt->force_hotplug_required = 0;
 595         if (HAS_PCH_SPLIT(dev)) {
 596                 u32 adpa;
 597
 598                 adpa = I915_READ(PCH_ADPA);
 599                 adpa &= ~ADPA_CRT_HOTPLUG_MASK;
 600                 adpa |= ADPA_HOTPLUG_BITS;
 601                 I915_WRITE(PCH_ADPA, adpa);
 602                 POSTING_READ(PCH_ADPA);
 603
 604                 DRM_DEBUG_KMS("pch crt adpa set to 0x%x\n", adpa);
 605                 crt->force_hotplug_required = 1;
 606         }
 607
 608         dev_priv->hotplug_supported_mask |= CRT_HOTPLUG_INT_STATUS;
 609 }