lockdep: Fix trace_[soft,hard]irqs_[on,off]() recursion
[pandora-kernel.git] / drivers / gpio / janz-ttl.c
1 /*
2  * Janz MODULbus VMOD-TTL GPIO Driver
3  *
4  * Copyright (c) 2010 Ira W. Snyder <iws@ovro.caltech.edu>
5  *
6  * This program is free software; you can redistribute it and/or modify it
7  * under the terms of the GNU General Public License as published by the
8  * Free Software Foundation; either version 2 of the License, or (at your
9  * option) any later version.
10  */
11
12 #include <linux/kernel.h>
13 #include <linux/module.h>
14 #include <linux/init.h>
15 #include <linux/interrupt.h>
16 #include <linux/delay.h>
17 #include <linux/platform_device.h>
18 #include <linux/io.h>
19 #include <linux/gpio.h>
20 #include <linux/slab.h>
21
22 #include <linux/mfd/janz.h>
23
24 #define DRV_NAME "janz-ttl"
25
26 #define PORTA_DIRECTION         0x23
27 #define PORTB_DIRECTION         0x2B
28 #define PORTC_DIRECTION         0x06
29 #define PORTA_IOCTL             0x24
30 #define PORTB_IOCTL             0x2C
31 #define PORTC_IOCTL             0x07
32
33 #define MASTER_INT_CTL          0x00
34 #define MASTER_CONF_CTL         0x01
35
36 #define CONF_PAE                (1 << 2)
37 #define CONF_PBE                (1 << 7)
38 #define CONF_PCE                (1 << 4)
39
40 struct ttl_control_regs {
41         __be16 portc;
42         __be16 portb;
43         __be16 porta;
44         __be16 control;
45 };
46
47 struct ttl_module {
48         struct gpio_chip gpio;
49
50         /* base address of registers */
51         struct ttl_control_regs __iomem *regs;
52
53         u8 portc_shadow;
54         u8 portb_shadow;
55         u8 porta_shadow;
56
57         spinlock_t lock;
58 };
59
60 static int ttl_get_value(struct gpio_chip *gpio, unsigned offset)
61 {
62         struct ttl_module *mod = dev_get_drvdata(gpio->dev);
63         u8 *shadow;
64         int ret;
65
66         if (offset < 8) {
67                 shadow = &mod->porta_shadow;
68         } else if (offset < 16) {
69                 shadow = &mod->portb_shadow;
70                 offset -= 8;
71         } else {
72                 shadow = &mod->portc_shadow;
73                 offset -= 16;
74         }
75
76         spin_lock(&mod->lock);
77         ret = *shadow & (1 << offset);
78         spin_unlock(&mod->lock);
79         return ret;
80 }
81
82 static void ttl_set_value(struct gpio_chip *gpio, unsigned offset, int value)
83 {
84         struct ttl_module *mod = dev_get_drvdata(gpio->dev);
85         void __iomem *port;
86         u8 *shadow;
87
88         if (offset < 8) {
89                 port = &mod->regs->porta;
90                 shadow = &mod->porta_shadow;
91         } else if (offset < 16) {
92                 port = &mod->regs->portb;
93                 shadow = &mod->portb_shadow;
94                 offset -= 8;
95         } else {
96                 port = &mod->regs->portc;
97                 shadow = &mod->portc_shadow;
98                 offset -= 16;
99         }
100
101         spin_lock(&mod->lock);
102         if (value)
103                 *shadow |= (1 << offset);
104         else
105                 *shadow &= ~(1 << offset);
106
107         iowrite16be(*shadow, port);
108         spin_unlock(&mod->lock);
109 }
110
111 static void __devinit ttl_write_reg(struct ttl_module *mod, u8 reg, u16 val)
112 {
113         iowrite16be(reg, &mod->regs->control);
114         iowrite16be(val, &mod->regs->control);
115 }
116
117 static void __devinit ttl_setup_device(struct ttl_module *mod)
118 {
119         /* reset the device to a known state */
120         iowrite16be(0x0000, &mod->regs->control);
121         iowrite16be(0x0001, &mod->regs->control);
122         iowrite16be(0x0000, &mod->regs->control);
123
124         /* put all ports in open-drain mode */
125         ttl_write_reg(mod, PORTA_IOCTL, 0x00ff);
126         ttl_write_reg(mod, PORTB_IOCTL, 0x00ff);
127         ttl_write_reg(mod, PORTC_IOCTL, 0x000f);
128
129         /* set all ports as outputs */
130         ttl_write_reg(mod, PORTA_DIRECTION, 0x0000);
131         ttl_write_reg(mod, PORTB_DIRECTION, 0x0000);
132         ttl_write_reg(mod, PORTC_DIRECTION, 0x0000);
133
134         /* set all ports to drive zeroes */
135         iowrite16be(0x0000, &mod->regs->porta);
136         iowrite16be(0x0000, &mod->regs->portb);
137         iowrite16be(0x0000, &mod->regs->portc);
138
139         /* enable all ports */
140         ttl_write_reg(mod, MASTER_CONF_CTL, CONF_PAE | CONF_PBE | CONF_PCE);
141 }
142
143 static int __devinit ttl_probe(struct platform_device *pdev)
144 {
145         struct janz_platform_data *pdata;
146         struct device *dev = &pdev->dev;
147         struct ttl_module *mod;
148         struct gpio_chip *gpio;
149         struct resource *res;
150         int ret;
151
152         pdata = pdev->dev.platform_data;
153         if (!pdata) {
154                 dev_err(dev, "no platform data\n");
155                 ret = -ENXIO;
156                 goto out_return;
157         }
158
159         mod = kzalloc(sizeof(*mod), GFP_KERNEL);
160         if (!mod) {
161                 dev_err(dev, "unable to allocate private data\n");
162                 ret = -ENOMEM;
163                 goto out_return;
164         }
165
166         platform_set_drvdata(pdev, mod);
167         spin_lock_init(&mod->lock);
168
169         /* get access to the MODULbus registers for this module */
170         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
171         if (!res) {
172                 dev_err(dev, "MODULbus registers not found\n");
173                 ret = -ENODEV;
174                 goto out_free_mod;
175         }
176
177         mod->regs = ioremap(res->start, resource_size(res));
178         if (!mod->regs) {
179                 dev_err(dev, "MODULbus registers not ioremap\n");
180                 ret = -ENOMEM;
181                 goto out_free_mod;
182         }
183
184         ttl_setup_device(mod);
185
186         /* Initialize the GPIO data structures */
187         gpio = &mod->gpio;
188         gpio->dev = &pdev->dev;
189         gpio->label = pdev->name;
190         gpio->get = ttl_get_value;
191         gpio->set = ttl_set_value;
192         gpio->owner = THIS_MODULE;
193
194         /* request dynamic allocation */
195         gpio->base = -1;
196         gpio->ngpio = 20;
197
198         ret = gpiochip_add(gpio);
199         if (ret) {
200                 dev_err(dev, "unable to add GPIO chip\n");
201                 goto out_iounmap_regs;
202         }
203
204         dev_info(&pdev->dev, "module %d: registered GPIO device\n",
205                              pdata->modno);
206         return 0;
207
208 out_iounmap_regs:
209         iounmap(mod->regs);
210 out_free_mod:
211         kfree(mod);
212 out_return:
213         return ret;
214 }
215
216 static int __devexit ttl_remove(struct platform_device *pdev)
217 {
218         struct ttl_module *mod = platform_get_drvdata(pdev);
219         struct device *dev = &pdev->dev;
220         int ret;
221
222         ret = gpiochip_remove(&mod->gpio);
223         if (ret) {
224                 dev_err(dev, "unable to remove GPIO chip\n");
225                 return ret;
226         }
227
228         iounmap(mod->regs);
229         kfree(mod);
230         return 0;
231 }
232
233 static struct platform_driver ttl_driver = {
234         .driver         = {
235                 .name   = DRV_NAME,
236                 .owner  = THIS_MODULE,
237         },
238         .probe          = ttl_probe,
239         .remove         = __devexit_p(ttl_remove),
240 };
241
242 static int __init ttl_init(void)
243 {
244         return platform_driver_register(&ttl_driver);
245 }
246
247 static void __exit ttl_exit(void)
248 {
249         platform_driver_unregister(&ttl_driver);
250 }
251
252 MODULE_AUTHOR("Ira W. Snyder <iws@ovro.caltech.edu>");
253 MODULE_DESCRIPTION("Janz MODULbus VMOD-TTL Driver");
254 MODULE_LICENSE("GPL");
255 MODULE_ALIAS("platform:janz-ttl");
256
257 module_init(ttl_init);
258 module_exit(ttl_exit);