drivers/bluetooth/btuart_cs.c

   1 /*
   2  *
   3  *  Driver for Bluetooth PCMCIA cards with HCI UART interface
   4  *
   5  *  Copyright (C) 2001-2002  Marcel Holtmann <marcel@holtmann.org>
   6  *
   7  *
   8  *  This program is free software; you can redistribute it and/or modify
   9  *  it under the terms of the GNU General Public License version 2 as
  10  *  published by the Free Software Foundation;
  11  *
  12  *  Software distributed under the License is distributed on an "AS
  13  *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
  14  *  implied. See the License for the specific language governing
  15  *  rights and limitations under the License.
  16  *
  17  *  The initial developer of the original code is David A. Hinds
  18  *  <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
  19  *  are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
  20  *
  21  */
  22
  23 #include <linux/module.h>
  24
  25 #include <linux/kernel.h>
  26 #include <linux/init.h>
  27 #include <linux/slab.h>
  28 #include <linux/types.h>
  29 #include <linux/delay.h>
  30 #include <linux/errno.h>
  31 #include <linux/ptrace.h>
  32 #include <linux/ioport.h>
  33 #include <linux/spinlock.h>
  34 #include <linux/moduleparam.h>
  35
  36 #include <linux/skbuff.h>
  37 #include <linux/string.h>
  38 #include <linux/serial.h>
  39 #include <linux/serial_reg.h>
  40 #include <linux/bitops.h>
  41 #include <asm/system.h>
  42 #include <asm/io.h>
  43
  44 #include <pcmcia/cistpl.h>
  45 #include <pcmcia/ciscode.h>
  46 #include <pcmcia/ds.h>
  47 #include <pcmcia/cisreg.h>
  48
  49 #include <net/bluetooth/bluetooth.h>
  50 #include <net/bluetooth/hci_core.h>
  51
  52
  53
  54 /* ======================== Module parameters ======================== */
  55
  56
  57 MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
  58 MODULE_DESCRIPTION("Bluetooth driver for Bluetooth PCMCIA cards with HCI UART interface");
  59 MODULE_LICENSE("GPL");
  60
  61
  62
  63 /* ======================== Local structures ======================== */
  64
  65
  66 typedef struct btuart_info_t {
  67         struct pcmcia_device *p_dev;
  68
  69         struct hci_dev *hdev;
  70
  71         spinlock_t lock;        /* For serializing operations */
  72
  73         struct sk_buff_head txq;
  74         unsigned long tx_state;
  75
  76         unsigned long rx_state;
  77         unsigned long rx_count;
  78         struct sk_buff *rx_skb;
  79 } btuart_info_t;
  80
  81
  82 static int btuart_config(struct pcmcia_device *link);
  83 static void btuart_release(struct pcmcia_device *link);
  84
  85 static void btuart_detach(struct pcmcia_device *p_dev);
  86
  87
  88 /* Maximum baud rate */
  89 #define SPEED_MAX  115200
  90
  91 /* Default baud rate: 57600, 115200, 230400 or 460800 */
  92 #define DEFAULT_BAUD_RATE  115200
  93
  94
  95 /* Transmit states  */
  96 #define XMIT_SENDING    1
  97 #define XMIT_WAKEUP     2
  98 #define XMIT_WAITING    8
  99
 100 /* Receiver states */
 101 #define RECV_WAIT_PACKET_TYPE   0
 102 #define RECV_WAIT_EVENT_HEADER  1
 103 #define RECV_WAIT_ACL_HEADER    2
 104 #define RECV_WAIT_SCO_HEADER    3
 105 #define RECV_WAIT_DATA          4
 106
 107
 108
 109 /* ======================== Interrupt handling ======================== */
 110
 111
 112 static int btuart_write(unsigned int iobase, int fifo_size, __u8 *buf, int len)
 113 {
 114         int actual = 0;
 115
 116         /* Tx FIFO should be empty */
 117         if (!(inb(iobase + UART_LSR) & UART_LSR_THRE))
 118                 return 0;
 119
 120         /* Fill FIFO with current frame */
 121         while ((fifo_size-- > 0) && (actual < len)) {
 122                 /* Transmit next byte */
 123                 outb(buf[actual], iobase + UART_TX);
 124                 actual++;
 125         }
 126
 127         return actual;
 128 }
 129
 130
 131 static void btuart_write_wakeup(btuart_info_t *info)
 132 {
 133         if (!info) {
 134                 BT_ERR("Unknown device");
 135                 return;
 136         }
 137
 138         if (test_and_set_bit(XMIT_SENDING, &(info->tx_state))) {
 139                 set_bit(XMIT_WAKEUP, &(info->tx_state));
 140                 return;
 141         }
 142
 143         do {
 144                 register unsigned int iobase = info->p_dev->resource[0]->start;
 145                 register struct sk_buff *skb;
 146                 register int len;
 147
 148                 clear_bit(XMIT_WAKEUP, &(info->tx_state));
 149
 150                 if (!pcmcia_dev_present(info->p_dev))
 151                         return;
 152
 153                 if (!(skb = skb_dequeue(&(info->txq))))
 154                         break;
 155
 156                 /* Send frame */
 157                 len = btuart_write(iobase, 16, skb->data, skb->len);
 158                 set_bit(XMIT_WAKEUP, &(info->tx_state));
 159
 160                 if (len == skb->len) {
 161                         kfree_skb(skb);
 162                 } else {
 163                         skb_pull(skb, len);
 164                         skb_queue_head(&(info->txq), skb);
 165                 }
 166
 167                 info->hdev->stat.byte_tx += len;
 168
 169         } while (test_bit(XMIT_WAKEUP, &(info->tx_state)));
 170
 171         clear_bit(XMIT_SENDING, &(info->tx_state));
 172 }
 173
 174
 175 static void btuart_receive(btuart_info_t *info)
 176 {
 177         unsigned int iobase;
 178         int boguscount = 0;
 179
 180         if (!info) {
 181                 BT_ERR("Unknown device");
 182                 return;
 183         }
 184
 185         iobase = info->p_dev->resource[0]->start;
 186
 187         do {
 188                 info->hdev->stat.byte_rx++;
 189
 190                 /* Allocate packet */
 191                 if (info->rx_skb == NULL) {
 192                         info->rx_state = RECV_WAIT_PACKET_TYPE;
 193                         info->rx_count = 0;
 194                         if (!(info->rx_skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC))) {
 195                                 BT_ERR("Can't allocate mem for new packet");
 196                                 return;
 197                         }
 198                 }
 199
 200                 if (info->rx_state == RECV_WAIT_PACKET_TYPE) {
 201
 202                         info->rx_skb->dev = (void *) info->hdev;
 203                         bt_cb(info->rx_skb)->pkt_type = inb(iobase + UART_RX);
 204
 205                         switch (bt_cb(info->rx_skb)->pkt_type) {
 206
 207                         case HCI_EVENT_PKT:
 208                                 info->rx_state = RECV_WAIT_EVENT_HEADER;
 209                                 info->rx_count = HCI_EVENT_HDR_SIZE;
 210                                 break;
 211
 212                         case HCI_ACLDATA_PKT:
 213                                 info->rx_state = RECV_WAIT_ACL_HEADER;
 214                                 info->rx_count = HCI_ACL_HDR_SIZE;
 215                                 break;
 216
 217                         case HCI_SCODATA_PKT:
 218                                 info->rx_state = RECV_WAIT_SCO_HEADER;
 219                                 info->rx_count = HCI_SCO_HDR_SIZE;
 220                                 break;
 221
 222                         default:
 223                                 /* Unknown packet */
 224                                 BT_ERR("Unknown HCI packet with type 0x%02x received", bt_cb(info->rx_skb)->pkt_type);
 225                                 info->hdev->stat.err_rx++;
 226                                 clear_bit(HCI_RUNNING, &(info->hdev->flags));
 227
 228                                 kfree_skb(info->rx_skb);
 229                                 info->rx_skb = NULL;
 230                                 break;
 231
 232                         }
 233
 234                 } else {
 235
 236                         *skb_put(info->rx_skb, 1) = inb(iobase + UART_RX);
 237                         info->rx_count--;
 238
 239                         if (info->rx_count == 0) {
 240
 241                                 int dlen;
 242                                 struct hci_event_hdr *eh;
 243                                 struct hci_acl_hdr *ah;
 244                                 struct hci_sco_hdr *sh;
 245
 246
 247                                 switch (info->rx_state) {
 248
 249                                 case RECV_WAIT_EVENT_HEADER:
 250                                         eh = hci_event_hdr(info->rx_skb);
 251                                         info->rx_state = RECV_WAIT_DATA;
 252                                         info->rx_count = eh->plen;
 253                                         break;
 254
 255                                 case RECV_WAIT_ACL_HEADER:
 256                                         ah = hci_acl_hdr(info->rx_skb);
 257                                         dlen = __le16_to_cpu(ah->dlen);
 258                                         info->rx_state = RECV_WAIT_DATA;
 259                                         info->rx_count = dlen;
 260                                         break;
 261
 262                                 case RECV_WAIT_SCO_HEADER:
 263                                         sh = hci_sco_hdr(info->rx_skb);
 264                                         info->rx_state = RECV_WAIT_DATA;
 265                                         info->rx_count = sh->dlen;
 266                                         break;
 267
 268                                 case RECV_WAIT_DATA:
 269                                         hci_recv_frame(info->rx_skb);
 270                                         info->rx_skb = NULL;
 271                                         break;
 272
 273                                 }
 274
 275                         }
 276
 277                 }
 278
 279                 /* Make sure we don't stay here too long */
 280                 if (boguscount++ > 16)
 281                         break;
 282
 283         } while (inb(iobase + UART_LSR) & UART_LSR_DR);
 284 }
 285
 286
 287 static irqreturn_t btuart_interrupt(int irq, void *dev_inst)
 288 {
 289         btuart_info_t *info = dev_inst;
 290         unsigned int iobase;
 291         int boguscount = 0;
 292         int iir, lsr;
 293         irqreturn_t r = IRQ_NONE;
 294
 295         if (!info || !info->hdev)
 296                 /* our irq handler is shared */
 297                 return IRQ_NONE;
 298
 299         iobase = info->p_dev->resource[0]->start;
 300
 301         spin_lock(&(info->lock));
 302
 303         iir = inb(iobase + UART_IIR) & UART_IIR_ID;
 304         while (iir) {
 305                 r = IRQ_HANDLED;
 306
 307                 /* Clear interrupt */
 308                 lsr = inb(iobase + UART_LSR);
 309
 310                 switch (iir) {
 311                 case UART_IIR_RLSI:
 312                         BT_ERR("RLSI");
 313                         break;
 314                 case UART_IIR_RDI:
 315                         /* Receive interrupt */
 316                         btuart_receive(info);
 317                         break;
 318                 case UART_IIR_THRI:
 319                         if (lsr & UART_LSR_THRE) {
 320                                 /* Transmitter ready for data */
 321                                 btuart_write_wakeup(info);
 322                         }
 323                         break;
 324                 default:
 325                         BT_ERR("Unhandled IIR=%#x", iir);
 326                         break;
 327                 }
 328
 329                 /* Make sure we don't stay here too long */
 330                 if (boguscount++ > 100)
 331                         break;
 332
 333                 iir = inb(iobase + UART_IIR) & UART_IIR_ID;
 334
 335         }
 336
 337         spin_unlock(&(info->lock));
 338
 339         return r;
 340 }
 341
 342
 343 static void btuart_change_speed(btuart_info_t *info, unsigned int speed)
 344 {
 345         unsigned long flags;
 346         unsigned int iobase;
 347         int fcr;                /* FIFO control reg */
 348         int lcr;                /* Line control reg */
 349         int divisor;
 350
 351         if (!info) {
 352                 BT_ERR("Unknown device");
 353                 return;
 354         }
 355
 356         iobase = info->p_dev->resource[0]->start;
 357
 358         spin_lock_irqsave(&(info->lock), flags);
 359
 360         /* Turn off interrupts */
 361         outb(0, iobase + UART_IER);
 362
 363         divisor = SPEED_MAX / speed;
 364
 365         fcr = UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT;
 366
 367         /*
 368          * Use trigger level 1 to avoid 3 ms. timeout delay at 9600 bps, and
 369          * almost 1,7 ms at 19200 bps. At speeds above that we can just forget
 370          * about this timeout since it will always be fast enough.
 371          */
 372
 373         if (speed < 38400)
 374                 fcr |= UART_FCR_TRIGGER_1;
 375         else
 376                 fcr |= UART_FCR_TRIGGER_14;
 377
 378         /* Bluetooth cards use 8N1 */
 379         lcr = UART_LCR_WLEN8;
 380
 381         outb(UART_LCR_DLAB | lcr, iobase + UART_LCR);   /* Set DLAB */
 382         outb(divisor & 0xff, iobase + UART_DLL);        /* Set speed */
 383         outb(divisor >> 8, iobase + UART_DLM);
 384         outb(lcr, iobase + UART_LCR);   /* Set 8N1  */
 385         outb(fcr, iobase + UART_FCR);   /* Enable FIFO's */
 386
 387         /* Turn on interrupts */
 388         outb(UART_IER_RLSI | UART_IER_RDI | UART_IER_THRI, iobase + UART_IER);
 389
 390         spin_unlock_irqrestore(&(info->lock), flags);
 391 }
 392
 393
 394
 395 /* ======================== HCI interface ======================== */
 396
 397
 398 static int btuart_hci_flush(struct hci_dev *hdev)
 399 {
 400         btuart_info_t *info = (btuart_info_t *)(hdev->driver_data);
 401
 402         /* Drop TX queue */
 403         skb_queue_purge(&(info->txq));
 404
 405         return 0;
 406 }
 407
 408
 409 static int btuart_hci_open(struct hci_dev *hdev)
 410 {
 411         set_bit(HCI_RUNNING, &(hdev->flags));
 412
 413         return 0;
 414 }
 415
 416
 417 static int btuart_hci_close(struct hci_dev *hdev)
 418 {
 419         if (!test_and_clear_bit(HCI_RUNNING, &(hdev->flags)))
 420                 return 0;
 421
 422         btuart_hci_flush(hdev);
 423
 424         return 0;
 425 }
 426
 427
 428 static int btuart_hci_send_frame(struct sk_buff *skb)
 429 {
 430         btuart_info_t *info;
 431         struct hci_dev *hdev = (struct hci_dev *)(skb->dev);
 432
 433         if (!hdev) {
 434                 BT_ERR("Frame for unknown HCI device (hdev=NULL)");
 435                 return -ENODEV;
 436         }
 437
 438         info = (btuart_info_t *)(hdev->driver_data);
 439
 440         switch (bt_cb(skb)->pkt_type) {
 441         case HCI_COMMAND_PKT:
 442                 hdev->stat.cmd_tx++;
 443                 break;
 444         case HCI_ACLDATA_PKT:
 445                 hdev->stat.acl_tx++;
 446                 break;
 447         case HCI_SCODATA_PKT:
 448                 hdev->stat.sco_tx++;
 449                 break;
 450         };
 451
 452         /* Prepend skb with frame type */
 453         memcpy(skb_push(skb, 1), &bt_cb(skb)->pkt_type, 1);
 454         skb_queue_tail(&(info->txq), skb);
 455
 456         btuart_write_wakeup(info);
 457
 458         return 0;
 459 }
 460
 461
 462 static void btuart_hci_destruct(struct hci_dev *hdev)
 463 {
 464 }
 465
 466
 467 static int btuart_hci_ioctl(struct hci_dev *hdev, unsigned int cmd, unsigned long arg)
 468 {
 469         return -ENOIOCTLCMD;
 470 }
 471
 472
 473
 474 /* ======================== Card services HCI interaction ======================== */
 475
 476
 477 static int btuart_open(btuart_info_t *info)
 478 {
 479         unsigned long flags;
 480         unsigned int iobase = info->p_dev->resource[0]->start;
 481         struct hci_dev *hdev;
 482
 483         spin_lock_init(&(info->lock));
 484
 485         skb_queue_head_init(&(info->txq));
 486
 487         info->rx_state = RECV_WAIT_PACKET_TYPE;
 488         info->rx_count = 0;
 489         info->rx_skb = NULL;
 490
 491         /* Initialize HCI device */
 492         hdev = hci_alloc_dev();
 493         if (!hdev) {
 494                 BT_ERR("Can't allocate HCI device");
 495                 return -ENOMEM;
 496         }
 497
 498         info->hdev = hdev;
 499
 500         hdev->bus = HCI_PCCARD;
 501         hdev->driver_data = info;
 502         SET_HCIDEV_DEV(hdev, &info->p_dev->dev);
 503
 504         hdev->open     = btuart_hci_open;
 505         hdev->close    = btuart_hci_close;
 506         hdev->flush    = btuart_hci_flush;
 507         hdev->send     = btuart_hci_send_frame;
 508         hdev->destruct = btuart_hci_destruct;
 509         hdev->ioctl    = btuart_hci_ioctl;
 510
 511         hdev->owner = THIS_MODULE;
 512
 513         spin_lock_irqsave(&(info->lock), flags);
 514
 515         /* Reset UART */
 516         outb(0, iobase + UART_MCR);
 517
 518         /* Turn off interrupts */
 519         outb(0, iobase + UART_IER);
 520
 521         /* Initialize UART */
 522         outb(UART_LCR_WLEN8, iobase + UART_LCR);        /* Reset DLAB */
 523         outb((UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2), iobase + UART_MCR);
 524
 525         /* Turn on interrupts */
 526         // outb(UART_IER_RLSI | UART_IER_RDI | UART_IER_THRI, iobase + UART_IER);
 527
 528         spin_unlock_irqrestore(&(info->lock), flags);
 529
 530         btuart_change_speed(info, DEFAULT_BAUD_RATE);
 531
 532         /* Timeout before it is safe to send the first HCI packet */
 533         msleep(1000);
 534
 535         /* Register HCI device */
 536         if (hci_register_dev(hdev) < 0) {
 537                 BT_ERR("Can't register HCI device");
 538                 info->hdev = NULL;
 539                 hci_free_dev(hdev);
 540                 return -ENODEV;
 541         }
 542
 543         return 0;
 544 }
 545
 546
 547 static int btuart_close(btuart_info_t *info)
 548 {
 549         unsigned long flags;
 550         unsigned int iobase = info->p_dev->resource[0]->start;
 551         struct hci_dev *hdev = info->hdev;
 552
 553         if (!hdev)
 554                 return -ENODEV;
 555
 556         btuart_hci_close(hdev);
 557
 558         spin_lock_irqsave(&(info->lock), flags);
 559
 560         /* Reset UART */
 561         outb(0, iobase + UART_MCR);
 562
 563         /* Turn off interrupts */
 564         outb(0, iobase + UART_IER);
 565
 566         spin_unlock_irqrestore(&(info->lock), flags);
 567
 568         if (hci_unregister_dev(hdev) < 0)
 569                 BT_ERR("Can't unregister HCI device %s", hdev->name);
 570
 571         hci_free_dev(hdev);
 572
 573         return 0;
 574 }
 575
 576 static int btuart_probe(struct pcmcia_device *link)
 577 {
 578         btuart_info_t *info;
 579
 580         /* Create new info device */
 581         info = kzalloc(sizeof(*info), GFP_KERNEL);
 582         if (!info)
 583                 return -ENOMEM;
 584
 585         info->p_dev = link;
 586         link->priv = info;
 587
 588         link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_VPP |
 589                 CONF_AUTO_SET_IO;
 590
 591         return btuart_config(link);
 592 }
 593
 594
 595 static void btuart_detach(struct pcmcia_device *link)
 596 {
 597         btuart_info_t *info = link->priv;
 598
 599         btuart_release(link);
 600         kfree(info);
 601 }
 602
 603 static int btuart_check_config(struct pcmcia_device *p_dev, void *priv_data)
 604 {
 605         int *try = priv_data;
 606
 607         if (try == 0)
 608                 p_dev->io_lines = 16;
 609
 610         if ((p_dev->resource[0]->end != 8) || (p_dev->resource[0]->start == 0))
 611                 return -EINVAL;
 612
 613         p_dev->resource[0]->end = 8;
 614         p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
 615         p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
 616
 617         return pcmcia_request_io(p_dev);
 618 }
 619
 620 static int btuart_check_config_notpicky(struct pcmcia_device *p_dev,
 621                                         void *priv_data)
 622 {
 623         static unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
 624         int j;
 625
 626         if (p_dev->io_lines > 3)
 627                 return -ENODEV;
 628
 629         p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
 630         p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
 631         p_dev->resource[0]->end = 8;
 632
 633         for (j = 0; j < 5; j++) {
 634                 p_dev->resource[0]->start = base[j];
 635                 p_dev->io_lines = base[j] ? 16 : 3;
 636                 if (!pcmcia_request_io(p_dev))
 637                         return 0;
 638         }
 639         return -ENODEV;
 640 }
 641
 642 static int btuart_config(struct pcmcia_device *link)
 643 {
 644         btuart_info_t *info = link->priv;
 645         int i;
 646         int try;
 647
 648         /* First pass: look for a config entry that looks normal.
 649            Two tries: without IO aliases, then with aliases */
 650         for (try = 0; try < 2; try++)
 651                 if (!pcmcia_loop_config(link, btuart_check_config, &try))
 652                         goto found_port;
 653
 654         /* Second pass: try to find an entry that isn't picky about
 655            its base address, then try to grab any standard serial port
 656            address, and finally try to get any free port. */
 657         if (!pcmcia_loop_config(link, btuart_check_config_notpicky, NULL))
 658                 goto found_port;
 659
 660         BT_ERR("No usable port range found");
 661         goto failed;
 662
 663 found_port:
 664         i = pcmcia_request_irq(link, btuart_interrupt);
 665         if (i != 0)
 666                 goto failed;
 667
 668         i = pcmcia_enable_device(link);
 669         if (i != 0)
 670                 goto failed;
 671
 672         if (btuart_open(info) != 0)
 673                 goto failed;
 674
 675         return 0;
 676
 677 failed:
 678         btuart_release(link);
 679         return -ENODEV;
 680 }
 681
 682
 683 static void btuart_release(struct pcmcia_device *link)
 684 {
 685         btuart_info_t *info = link->priv;
 686
 687         btuart_close(info);
 688
 689         pcmcia_disable_device(link);
 690 }
 691
 692 static const struct pcmcia_device_id btuart_ids[] = {
 693         /* don't use this driver. Use serial_cs + hci_uart instead */
 694         PCMCIA_DEVICE_NULL
 695 };
 696 MODULE_DEVICE_TABLE(pcmcia, btuart_ids);
 697
 698 static struct pcmcia_driver btuart_driver = {
 699         .owner          = THIS_MODULE,
 700         .name           = "btuart_cs",
 701         .probe          = btuart_probe,
 702         .remove         = btuart_detach,
 703         .id_table       = btuart_ids,
 704 };
 705
 706 static int __init init_btuart_cs(void)
 707 {
 708         return pcmcia_register_driver(&btuart_driver);
 709 }
 710
 711
 712 static void __exit exit_btuart_cs(void)
 713 {
 714         pcmcia_unregister_driver(&btuart_driver);
 715 }
 716
 717 module_init(init_btuart_cs);
 718 module_exit(exit_btuart_cs);