drivers/block/DAC960.c

   1 /*
   2
   3   Linux Driver for Mylex DAC960/AcceleRAID/eXtremeRAID PCI RAID Controllers
   4
   5   Copyright 1998-2001 by Leonard N. Zubkoff <lnz@dandelion.com>
   6   Portions Copyright 2002 by Mylex (An IBM Business Unit)
   7
   8   This program is free software; you may redistribute and/or modify it under
   9   the terms of the GNU General Public License Version 2 as published by the
  10   Free Software Foundation.
  11
  12   This program is distributed in the hope that it will be useful, but
  13   WITHOUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY
  14   or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
  15   for complete details.
  16
  17 */
  18
  19
  20 #define DAC960_DriverVersion                    "2.5.49"
  21 #define DAC960_DriverDate                       "21 Aug 2007"
  22
  23
  24 #include <linux/module.h>
  25 #include <linux/types.h>
  26 #include <linux/miscdevice.h>
  27 #include <linux/blkdev.h>
  28 #include <linux/bio.h>
  29 #include <linux/completion.h>
  30 #include <linux/delay.h>
  31 #include <linux/genhd.h>
  32 #include <linux/hdreg.h>
  33 #include <linux/blkpg.h>
  34 #include <linux/dma-mapping.h>
  35 #include <linux/interrupt.h>
  36 #include <linux/ioport.h>
  37 #include <linux/mm.h>
  38 #include <linux/slab.h>
  39 #include <linux/mutex.h>
  40 #include <linux/proc_fs.h>
  41 #include <linux/seq_file.h>
  42 #include <linux/reboot.h>
  43 #include <linux/spinlock.h>
  44 #include <linux/timer.h>
  45 #include <linux/pci.h>
  46 #include <linux/init.h>
  47 #include <linux/jiffies.h>
  48 #include <linux/random.h>
  49 #include <linux/scatterlist.h>
  50 #include <asm/io.h>
  51 #include <asm/uaccess.h>
  52 #include "DAC960.h"
  53
  54 #define DAC960_GAM_MINOR        252
  55
  56
  57 static DEFINE_MUTEX(DAC960_mutex);
  58 static DAC960_Controller_T *DAC960_Controllers[DAC960_MaxControllers];
  59 static int DAC960_ControllerCount;
  60 static struct proc_dir_entry *DAC960_ProcDirectoryEntry;
  61
  62 static long disk_size(DAC960_Controller_T *p, int drive_nr)
  63 {
  64         if (p->FirmwareType == DAC960_V1_Controller) {
  65                 if (drive_nr >= p->LogicalDriveCount)
  66                         return 0;
  67                 return p->V1.LogicalDriveInformation[drive_nr].
  68                         LogicalDriveSize;
  69         } else {
  70                 DAC960_V2_LogicalDeviceInfo_T *i =
  71                         p->V2.LogicalDeviceInformation[drive_nr];
  72                 if (i == NULL)
  73                         return 0;
  74                 return i->ConfigurableDeviceSize;
  75         }
  76 }
  77
  78 static int DAC960_open(struct block_device *bdev, fmode_t mode)
  79 {
  80         struct gendisk *disk = bdev->bd_disk;
  81         DAC960_Controller_T *p = disk->queue->queuedata;
  82         int drive_nr = (long)disk->private_data;
  83         int ret = -ENXIO;
  84
  85         mutex_lock(&DAC960_mutex);
  86         if (p->FirmwareType == DAC960_V1_Controller) {
  87                 if (p->V1.LogicalDriveInformation[drive_nr].
  88                     LogicalDriveState == DAC960_V1_LogicalDrive_Offline)
  89                         goto out;
  90         } else {
  91                 DAC960_V2_LogicalDeviceInfo_T *i =
  92                         p->V2.LogicalDeviceInformation[drive_nr];
  93                 if (!i || i->LogicalDeviceState == DAC960_V2_LogicalDevice_Offline)
  94                         goto out;
  95         }
  96
  97         check_disk_change(bdev);
  98
  99         if (!get_capacity(p->disks[drive_nr]))
 100                 goto out;
 101         ret = 0;
 102 out:
 103         mutex_unlock(&DAC960_mutex);
 104         return ret;
 105 }
 106
 107 static int DAC960_getgeo(struct block_device *bdev, struct hd_geometry *geo)
 108 {
 109         struct gendisk *disk = bdev->bd_disk;
 110         DAC960_Controller_T *p = disk->queue->queuedata;
 111         int drive_nr = (long)disk->private_data;
 112
 113         if (p->FirmwareType == DAC960_V1_Controller) {
 114                 geo->heads = p->V1.GeometryTranslationHeads;
 115                 geo->sectors = p->V1.GeometryTranslationSectors;
 116                 geo->cylinders = p->V1.LogicalDriveInformation[drive_nr].
 117                         LogicalDriveSize / (geo->heads * geo->sectors);
 118         } else {
 119                 DAC960_V2_LogicalDeviceInfo_T *i =
 120                         p->V2.LogicalDeviceInformation[drive_nr];
 121                 switch (i->DriveGeometry) {
 122                 case DAC960_V2_Geometry_128_32:
 123                         geo->heads = 128;
 124                         geo->sectors = 32;
 125                         break;
 126                 case DAC960_V2_Geometry_255_63:
 127                         geo->heads = 255;
 128                         geo->sectors = 63;
 129                         break;
 130                 default:
 131                         DAC960_Error("Illegal Logical Device Geometry %d\n",
 132                                         p, i->DriveGeometry);
 133                         return -EINVAL;
 134                 }
 135
 136                 geo->cylinders = i->ConfigurableDeviceSize /
 137                         (geo->heads * geo->sectors);
 138         }
 139
 140         return 0;
 141 }
 142
 143 static unsigned int DAC960_check_events(struct gendisk *disk,
 144                                         unsigned int clearing)
 145 {
 146         DAC960_Controller_T *p = disk->queue->queuedata;
 147         int drive_nr = (long)disk->private_data;
 148
 149         if (!p->LogicalDriveInitiallyAccessible[drive_nr])
 150                 return DISK_EVENT_MEDIA_CHANGE;
 151         return 0;
 152 }
 153
 154 static int DAC960_revalidate_disk(struct gendisk *disk)
 155 {
 156         DAC960_Controller_T *p = disk->queue->queuedata;
 157         int unit = (long)disk->private_data;
 158
 159         set_capacity(disk, disk_size(p, unit));
 160         return 0;
 161 }
 162
 163 static const struct block_device_operations DAC960_BlockDeviceOperations = {
 164         .owner                  = THIS_MODULE,
 165         .open                   = DAC960_open,
 166         .getgeo                 = DAC960_getgeo,
 167         .check_events           = DAC960_check_events,
 168         .revalidate_disk        = DAC960_revalidate_disk,
 169 };
 170
 171
 172 /*
 173   DAC960_AnnounceDriver announces the Driver Version and Date, Author's Name,
 174   Copyright Notice, and Electronic Mail Address.
 175 */
 176
 177 static void DAC960_AnnounceDriver(DAC960_Controller_T *Controller)
 178 {
 179   DAC960_Announce("***** DAC960 RAID Driver Version "
 180                   DAC960_DriverVersion " of "
 181                   DAC960_DriverDate " *****\n", Controller);
 182   DAC960_Announce("Copyright 1998-2001 by Leonard N. Zubkoff "
 183                   "<lnz@dandelion.com>\n", Controller);
 184 }
 185
 186
 187 /*
 188   DAC960_Failure prints a standardized error message, and then returns false.
 189 */
 190
 191 static bool DAC960_Failure(DAC960_Controller_T *Controller,
 192                               unsigned char *ErrorMessage)
 193 {
 194   DAC960_Error("While configuring DAC960 PCI RAID Controller at\n",
 195                Controller);
 196   if (Controller->IO_Address == 0)
 197     DAC960_Error("PCI Bus %d Device %d Function %d I/O Address N/A "
 198                  "PCI Address 0x%X\n", Controller,
 199                  Controller->Bus, Controller->Device,
 200                  Controller->Function, Controller->PCI_Address);
 201   else DAC960_Error("PCI Bus %d Device %d Function %d I/O Address "
 202                     "0x%X PCI Address 0x%X\n", Controller,
 203                     Controller->Bus, Controller->Device,
 204                     Controller->Function, Controller->IO_Address,
 205                     Controller->PCI_Address);
 206   DAC960_Error("%s FAILED - DETACHING\n", Controller, ErrorMessage);
 207   return false;
 208 }
 209
 210 /*
 211   init_dma_loaf() and slice_dma_loaf() are helper functions for
 212   aggregating the dma-mapped memory for a well-known collection of
 213   data structures that are of different lengths.
 214
 215   These routines don't guarantee any alignment.  The caller must
 216   include any space needed for alignment in the sizes of the structures
 217   that are passed in.
 218  */
 219
 220 static bool init_dma_loaf(struct pci_dev *dev, struct dma_loaf *loaf,
 221                                                                  size_t len)
 222 {
 223         void *cpu_addr;
 224         dma_addr_t dma_handle;
 225
 226         cpu_addr = pci_alloc_consistent(dev, len, &dma_handle);
 227         if (cpu_addr == NULL)
 228                 return false;
 229
 230         loaf->cpu_free = loaf->cpu_base = cpu_addr;
 231         loaf->dma_free =loaf->dma_base = dma_handle;
 232         loaf->length = len;
 233         memset(cpu_addr, 0, len);
 234         return true;
 235 }
 236
 237 static void *slice_dma_loaf(struct dma_loaf *loaf, size_t len,
 238                                         dma_addr_t *dma_handle)
 239 {
 240         void *cpu_end = loaf->cpu_free + len;
 241         void *cpu_addr = loaf->cpu_free;
 242
 243         BUG_ON(cpu_end > loaf->cpu_base + loaf->length);
 244         *dma_handle = loaf->dma_free;
 245         loaf->cpu_free = cpu_end;
 246         loaf->dma_free += len;
 247         return cpu_addr;
 248 }
 249
 250 static void free_dma_loaf(struct pci_dev *dev, struct dma_loaf *loaf_handle)
 251 {
 252         if (loaf_handle->cpu_base != NULL)
 253                 pci_free_consistent(dev, loaf_handle->length,
 254                         loaf_handle->cpu_base, loaf_handle->dma_base);
 255 }
 256
 257
 258 /*
 259   DAC960_CreateAuxiliaryStructures allocates and initializes the auxiliary
 260   data structures for Controller.  It returns true on success and false on
 261   failure.
 262 */
 263
 264 static bool DAC960_CreateAuxiliaryStructures(DAC960_Controller_T *Controller)
 265 {
 266   int CommandAllocationLength, CommandAllocationGroupSize;
 267   int CommandsRemaining = 0, CommandIdentifier, CommandGroupByteCount;
 268   void *AllocationPointer = NULL;
 269   void *ScatterGatherCPU = NULL;
 270   dma_addr_t ScatterGatherDMA;
 271   struct pci_pool *ScatterGatherPool;
 272   void *RequestSenseCPU = NULL;
 273   dma_addr_t RequestSenseDMA;
 274   struct pci_pool *RequestSensePool = NULL;
 275
 276   if (Controller->FirmwareType == DAC960_V1_Controller)
 277     {
 278       CommandAllocationLength = offsetof(DAC960_Command_T, V1.EndMarker);
 279       CommandAllocationGroupSize = DAC960_V1_CommandAllocationGroupSize;
 280       ScatterGatherPool = pci_pool_create("DAC960_V1_ScatterGather",
 281                 Controller->PCIDevice,
 282         DAC960_V1_ScatterGatherLimit * sizeof(DAC960_V1_ScatterGatherSegment_T),
 283         sizeof(DAC960_V1_ScatterGatherSegment_T), 0);
 284       if (ScatterGatherPool == NULL)
 285             return DAC960_Failure(Controller,
 286                         "AUXILIARY STRUCTURE CREATION (SG)");
 287       Controller->ScatterGatherPool = ScatterGatherPool;
 288     }
 289   else
 290     {
 291       CommandAllocationLength = offsetof(DAC960_Command_T, V2.EndMarker);
 292       CommandAllocationGroupSize = DAC960_V2_CommandAllocationGroupSize;
 293       ScatterGatherPool = pci_pool_create("DAC960_V2_ScatterGather",
 294                 Controller->PCIDevice,
 295         DAC960_V2_ScatterGatherLimit * sizeof(DAC960_V2_ScatterGatherSegment_T),
 296         sizeof(DAC960_V2_ScatterGatherSegment_T), 0);
 297       if (ScatterGatherPool == NULL)
 298             return DAC960_Failure(Controller,
 299                         "AUXILIARY STRUCTURE CREATION (SG)");
 300       RequestSensePool = pci_pool_create("DAC960_V2_RequestSense",
 301                 Controller->PCIDevice, sizeof(DAC960_SCSI_RequestSense_T),
 302                 sizeof(int), 0);
 303       if (RequestSensePool == NULL) {
 304             pci_pool_destroy(ScatterGatherPool);
 305             return DAC960_Failure(Controller,
 306                         "AUXILIARY STRUCTURE CREATION (SG)");
 307       }
 308       Controller->ScatterGatherPool = ScatterGatherPool;
 309       Controller->V2.RequestSensePool = RequestSensePool;
 310     }
 311   Controller->CommandAllocationGroupSize = CommandAllocationGroupSize;
 312   Controller->FreeCommands = NULL;
 313   for (CommandIdentifier = 1;
 314        CommandIdentifier <= Controller->DriverQueueDepth;
 315        CommandIdentifier++)
 316     {
 317       DAC960_Command_T *Command;
 318       if (--CommandsRemaining <= 0)
 319         {
 320           CommandsRemaining =
 321                 Controller->DriverQueueDepth - CommandIdentifier + 1;
 322           if (CommandsRemaining > CommandAllocationGroupSize)
 323                 CommandsRemaining = CommandAllocationGroupSize;
 324           CommandGroupByteCount =
 325                 CommandsRemaining * CommandAllocationLength;
 326           AllocationPointer = kzalloc(CommandGroupByteCount, GFP_ATOMIC);
 327           if (AllocationPointer == NULL)
 328                 return DAC960_Failure(Controller,
 329                                         "AUXILIARY STRUCTURE CREATION");
 330          }
 331       Command = (DAC960_Command_T *) AllocationPointer;
 332       AllocationPointer += CommandAllocationLength;
 333       Command->CommandIdentifier = CommandIdentifier;
 334       Command->Controller = Controller;
 335       Command->Next = Controller->FreeCommands;
 336       Controller->FreeCommands = Command;
 337       Controller->Commands[CommandIdentifier-1] = Command;
 338       ScatterGatherCPU = pci_pool_alloc(ScatterGatherPool, GFP_ATOMIC,
 339                                                         &ScatterGatherDMA);
 340       if (ScatterGatherCPU == NULL)
 341           return DAC960_Failure(Controller, "AUXILIARY STRUCTURE CREATION");
 342
 343       if (RequestSensePool != NULL) {
 344           RequestSenseCPU = pci_pool_alloc(RequestSensePool, GFP_ATOMIC,
 345                                                 &RequestSenseDMA);
 346           if (RequestSenseCPU == NULL) {
 347                 pci_pool_free(ScatterGatherPool, ScatterGatherCPU,
 348                                 ScatterGatherDMA);
 349                 return DAC960_Failure(Controller,
 350                                         "AUXILIARY STRUCTURE CREATION");
 351           }
 352         }
 353      if (Controller->FirmwareType == DAC960_V1_Controller) {
 354         Command->cmd_sglist = Command->V1.ScatterList;
 355         Command->V1.ScatterGatherList =
 356                 (DAC960_V1_ScatterGatherSegment_T *)ScatterGatherCPU;
 357         Command->V1.ScatterGatherListDMA = ScatterGatherDMA;
 358         sg_init_table(Command->cmd_sglist, DAC960_V1_ScatterGatherLimit);
 359       } else {
 360         Command->cmd_sglist = Command->V2.ScatterList;
 361         Command->V2.ScatterGatherList =
 362                 (DAC960_V2_ScatterGatherSegment_T *)ScatterGatherCPU;
 363         Command->V2.ScatterGatherListDMA = ScatterGatherDMA;
 364         Command->V2.RequestSense =
 365                                 (DAC960_SCSI_RequestSense_T *)RequestSenseCPU;
 366         Command->V2.RequestSenseDMA = RequestSenseDMA;
 367         sg_init_table(Command->cmd_sglist, DAC960_V2_ScatterGatherLimit);
 368       }
 369     }
 370   return true;
 371 }
 372
 373
 374 /*
 375   DAC960_DestroyAuxiliaryStructures deallocates the auxiliary data
 376   structures for Controller.
 377 */
 378
 379 static void DAC960_DestroyAuxiliaryStructures(DAC960_Controller_T *Controller)
 380 {
 381   int i;
 382   struct pci_pool *ScatterGatherPool = Controller->ScatterGatherPool;
 383   struct pci_pool *RequestSensePool = NULL;
 384   void *ScatterGatherCPU;
 385   dma_addr_t ScatterGatherDMA;
 386   void *RequestSenseCPU;
 387   dma_addr_t RequestSenseDMA;
 388   DAC960_Command_T *CommandGroup = NULL;
 389
 390
 391   if (Controller->FirmwareType == DAC960_V2_Controller)
 392         RequestSensePool = Controller->V2.RequestSensePool;
 393
 394   Controller->FreeCommands = NULL;
 395   for (i = 0; i < Controller->DriverQueueDepth; i++)
 396     {
 397       DAC960_Command_T *Command = Controller->Commands[i];
 398
 399       if (Command == NULL)
 400           continue;
 401
 402       if (Controller->FirmwareType == DAC960_V1_Controller) {
 403           ScatterGatherCPU = (void *)Command->V1.ScatterGatherList;
 404           ScatterGatherDMA = Command->V1.ScatterGatherListDMA;
 405           RequestSenseCPU = NULL;
 406           RequestSenseDMA = (dma_addr_t)0;
 407       } else {
 408           ScatterGatherCPU = (void *)Command->V2.ScatterGatherList;
 409           ScatterGatherDMA = Command->V2.ScatterGatherListDMA;
 410           RequestSenseCPU = (void *)Command->V2.RequestSense;
 411           RequestSenseDMA = Command->V2.RequestSenseDMA;
 412       }
 413       if (ScatterGatherCPU != NULL)
 414           pci_pool_free(ScatterGatherPool, ScatterGatherCPU, ScatterGatherDMA);
 415       if (RequestSenseCPU != NULL)
 416           pci_pool_free(RequestSensePool, RequestSenseCPU, RequestSenseDMA);
 417
 418       if ((Command->CommandIdentifier
 419            % Controller->CommandAllocationGroupSize) == 1) {
 420            /*
 421             * We can't free the group of commands until all of the
 422             * request sense and scatter gather dma structures are free.
 423             * Remember the beginning of the group, but don't free it
 424             * until we've reached the beginning of the next group.
 425             */
 426            kfree(CommandGroup);
 427            CommandGroup = Command;
 428       }
 429       Controller->Commands[i] = NULL;
 430     }
 431   kfree(CommandGroup);
 432
 433   if (Controller->CombinedStatusBuffer != NULL)
 434     {
 435       kfree(Controller->CombinedStatusBuffer);
 436       Controller->CombinedStatusBuffer = NULL;
 437       Controller->CurrentStatusBuffer = NULL;
 438     }
 439
 440   if (ScatterGatherPool != NULL)
 441         pci_pool_destroy(ScatterGatherPool);
 442   if (Controller->FirmwareType == DAC960_V1_Controller)
 443         return;
 444
 445   if (RequestSensePool != NULL)
 446         pci_pool_destroy(RequestSensePool);
 447
 448   for (i = 0; i < DAC960_MaxLogicalDrives; i++) {
 449         kfree(Controller->V2.LogicalDeviceInformation[i]);
 450         Controller->V2.LogicalDeviceInformation[i] = NULL;
 451   }
 452
 453   for (i = 0; i < DAC960_V2_MaxPhysicalDevices; i++)
 454     {
 455       kfree(Controller->V2.PhysicalDeviceInformation[i]);
 456       Controller->V2.PhysicalDeviceInformation[i] = NULL;
 457       kfree(Controller->V2.InquiryUnitSerialNumber[i]);
 458       Controller->V2.InquiryUnitSerialNumber[i] = NULL;
 459     }
 460 }
 461
 462
 463 /*
 464   DAC960_V1_ClearCommand clears critical fields of Command for DAC960 V1
 465   Firmware Controllers.
 466 */
 467
 468 static inline void DAC960_V1_ClearCommand(DAC960_Command_T *Command)
 469 {
 470   DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
 471   memset(CommandMailbox, 0, sizeof(DAC960_V1_CommandMailbox_T));
 472   Command->V1.CommandStatus = 0;
 473 }
 474
 475
 476 /*
 477   DAC960_V2_ClearCommand clears critical fields of Command for DAC960 V2
 478   Firmware Controllers.
 479 */
 480
 481 static inline void DAC960_V2_ClearCommand(DAC960_Command_T *Command)
 482 {
 483   DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
 484   memset(CommandMailbox, 0, sizeof(DAC960_V2_CommandMailbox_T));
 485   Command->V2.CommandStatus = 0;
 486 }
 487
 488
 489 /*
 490   DAC960_AllocateCommand allocates a Command structure from Controller's
 491   free list.  During driver initialization, a special initialization command
 492   has been placed on the free list to guarantee that command allocation can
 493   never fail.
 494 */
 495
 496 static inline DAC960_Command_T *DAC960_AllocateCommand(DAC960_Controller_T
 497                                                        *Controller)
 498 {
 499   DAC960_Command_T *Command = Controller->FreeCommands;
 500   if (Command == NULL) return NULL;
 501   Controller->FreeCommands = Command->Next;
 502   Command->Next = NULL;
 503   return Command;
 504 }
 505
 506
 507 /*
 508   DAC960_DeallocateCommand deallocates Command, returning it to Controller's
 509   free list.
 510 */
 511
 512 static inline void DAC960_DeallocateCommand(DAC960_Command_T *Command)
 513 {
 514   DAC960_Controller_T *Controller = Command->Controller;
 515
 516   Command->Request = NULL;
 517   Command->Next = Controller->FreeCommands;
 518   Controller->FreeCommands = Command;
 519 }
 520
 521
 522 /*
 523   DAC960_WaitForCommand waits for a wake_up on Controller's Command Wait Queue.
 524 */
 525
 526 static void DAC960_WaitForCommand(DAC960_Controller_T *Controller)
 527 {
 528   spin_unlock_irq(&Controller->queue_lock);
 529   __wait_event(Controller->CommandWaitQueue, Controller->FreeCommands);
 530   spin_lock_irq(&Controller->queue_lock);
 531 }
 532
 533 /*
 534   DAC960_GEM_QueueCommand queues Command for DAC960 GEM Series Controllers.
 535 */
 536
 537 static void DAC960_GEM_QueueCommand(DAC960_Command_T *Command)
 538 {
 539   DAC960_Controller_T *Controller = Command->Controller;
 540   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
 541   DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
 542   DAC960_V2_CommandMailbox_T *NextCommandMailbox =
 543       Controller->V2.NextCommandMailbox;
 544
 545   CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
 546   DAC960_GEM_WriteCommandMailbox(NextCommandMailbox, CommandMailbox);
 547
 548   if (Controller->V2.PreviousCommandMailbox1->Words[0] == 0 ||
 549       Controller->V2.PreviousCommandMailbox2->Words[0] == 0)
 550       DAC960_GEM_MemoryMailboxNewCommand(ControllerBaseAddress);
 551
 552   Controller->V2.PreviousCommandMailbox2 =
 553       Controller->V2.PreviousCommandMailbox1;
 554   Controller->V2.PreviousCommandMailbox1 = NextCommandMailbox;
 555
 556   if (++NextCommandMailbox > Controller->V2.LastCommandMailbox)
 557       NextCommandMailbox = Controller->V2.FirstCommandMailbox;
 558
 559   Controller->V2.NextCommandMailbox = NextCommandMailbox;
 560 }
 561
 562 /*
 563   DAC960_BA_QueueCommand queues Command for DAC960 BA Series Controllers.
 564 */
 565
 566 static void DAC960_BA_QueueCommand(DAC960_Command_T *Command)
 567 {
 568   DAC960_Controller_T *Controller = Command->Controller;
 569   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
 570   DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
 571   DAC960_V2_CommandMailbox_T *NextCommandMailbox =
 572     Controller->V2.NextCommandMailbox;
 573   CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
 574   DAC960_BA_WriteCommandMailbox(NextCommandMailbox, CommandMailbox);
 575   if (Controller->V2.PreviousCommandMailbox1->Words[0] == 0 ||
 576       Controller->V2.PreviousCommandMailbox2->Words[0] == 0)
 577     DAC960_BA_MemoryMailboxNewCommand(ControllerBaseAddress);
 578   Controller->V2.PreviousCommandMailbox2 =
 579     Controller->V2.PreviousCommandMailbox1;
 580   Controller->V2.PreviousCommandMailbox1 = NextCommandMailbox;
 581   if (++NextCommandMailbox > Controller->V2.LastCommandMailbox)
 582     NextCommandMailbox = Controller->V2.FirstCommandMailbox;
 583   Controller->V2.NextCommandMailbox = NextCommandMailbox;
 584 }
 585
 586
 587 /*
 588   DAC960_LP_QueueCommand queues Command for DAC960 LP Series Controllers.
 589 */
 590
 591 static void DAC960_LP_QueueCommand(DAC960_Command_T *Command)
 592 {
 593   DAC960_Controller_T *Controller = Command->Controller;
 594   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
 595   DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
 596   DAC960_V2_CommandMailbox_T *NextCommandMailbox =
 597     Controller->V2.NextCommandMailbox;
 598   CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
 599   DAC960_LP_WriteCommandMailbox(NextCommandMailbox, CommandMailbox);
 600   if (Controller->V2.PreviousCommandMailbox1->Words[0] == 0 ||
 601       Controller->V2.PreviousCommandMailbox2->Words[0] == 0)
 602     DAC960_LP_MemoryMailboxNewCommand(ControllerBaseAddress);
 603   Controller->V2.PreviousCommandMailbox2 =
 604     Controller->V2.PreviousCommandMailbox1;
 605   Controller->V2.PreviousCommandMailbox1 = NextCommandMailbox;
 606   if (++NextCommandMailbox > Controller->V2.LastCommandMailbox)
 607     NextCommandMailbox = Controller->V2.FirstCommandMailbox;
 608   Controller->V2.NextCommandMailbox = NextCommandMailbox;
 609 }
 610
 611
 612 /*
 613   DAC960_LA_QueueCommandDualMode queues Command for DAC960 LA Series
 614   Controllers with Dual Mode Firmware.
 615 */
 616
 617 static void DAC960_LA_QueueCommandDualMode(DAC960_Command_T *Command)
 618 {
 619   DAC960_Controller_T *Controller = Command->Controller;
 620   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
 621   DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
 622   DAC960_V1_CommandMailbox_T *NextCommandMailbox =
 623     Controller->V1.NextCommandMailbox;
 624   CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
 625   DAC960_LA_WriteCommandMailbox(NextCommandMailbox, CommandMailbox);
 626   if (Controller->V1.PreviousCommandMailbox1->Words[0] == 0 ||
 627       Controller->V1.PreviousCommandMailbox2->Words[0] == 0)
 628     DAC960_LA_MemoryMailboxNewCommand(ControllerBaseAddress);
 629   Controller->V1.PreviousCommandMailbox2 =
 630     Controller->V1.PreviousCommandMailbox1;
 631   Controller->V1.PreviousCommandMailbox1 = NextCommandMailbox;
 632   if (++NextCommandMailbox > Controller->V1.LastCommandMailbox)
 633     NextCommandMailbox = Controller->V1.FirstCommandMailbox;
 634   Controller->V1.NextCommandMailbox = NextCommandMailbox;
 635 }
 636
 637
 638 /*
 639   DAC960_LA_QueueCommandSingleMode queues Command for DAC960 LA Series
 640   Controllers with Single Mode Firmware.
 641 */
 642
 643 static void DAC960_LA_QueueCommandSingleMode(DAC960_Command_T *Command)
 644 {
 645   DAC960_Controller_T *Controller = Command->Controller;
 646   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
 647   DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
 648   DAC960_V1_CommandMailbox_T *NextCommandMailbox =
 649     Controller->V1.NextCommandMailbox;
 650   CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
 651   DAC960_LA_WriteCommandMailbox(NextCommandMailbox, CommandMailbox);
 652   if (Controller->V1.PreviousCommandMailbox1->Words[0] == 0 ||
 653       Controller->V1.PreviousCommandMailbox2->Words[0] == 0)
 654     DAC960_LA_HardwareMailboxNewCommand(ControllerBaseAddress);
 655   Controller->V1.PreviousCommandMailbox2 =
 656     Controller->V1.PreviousCommandMailbox1;
 657   Controller->V1.PreviousCommandMailbox1 = NextCommandMailbox;
 658   if (++NextCommandMailbox > Controller->V1.LastCommandMailbox)
 659     NextCommandMailbox = Controller->V1.FirstCommandMailbox;
 660   Controller->V1.NextCommandMailbox = NextCommandMailbox;
 661 }
 662
 663
 664 /*
 665   DAC960_PG_QueueCommandDualMode queues Command for DAC960 PG Series
 666   Controllers with Dual Mode Firmware.
 667 */
 668
 669 static void DAC960_PG_QueueCommandDualMode(DAC960_Command_T *Command)
 670 {
 671   DAC960_Controller_T *Controller = Command->Controller;
 672   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
 673   DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
 674   DAC960_V1_CommandMailbox_T *NextCommandMailbox =
 675     Controller->V1.NextCommandMailbox;
 676   CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
 677   DAC960_PG_WriteCommandMailbox(NextCommandMailbox, CommandMailbox);
 678   if (Controller->V1.PreviousCommandMailbox1->Words[0] == 0 ||
 679       Controller->V1.PreviousCommandMailbox2->Words[0] == 0)
 680     DAC960_PG_MemoryMailboxNewCommand(ControllerBaseAddress);
 681   Controller->V1.PreviousCommandMailbox2 =
 682     Controller->V1.PreviousCommandMailbox1;
 683   Controller->V1.PreviousCommandMailbox1 = NextCommandMailbox;
 684   if (++NextCommandMailbox > Controller->V1.LastCommandMailbox)
 685     NextCommandMailbox = Controller->V1.FirstCommandMailbox;
 686   Controller->V1.NextCommandMailbox = NextCommandMailbox;
 687 }
 688
 689
 690 /*
 691   DAC960_PG_QueueCommandSingleMode queues Command for DAC960 PG Series
 692   Controllers with Single Mode Firmware.
 693 */
 694
 695 static void DAC960_PG_QueueCommandSingleMode(DAC960_Command_T *Command)
 696 {
 697   DAC960_Controller_T *Controller = Command->Controller;
 698   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
 699   DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
 700   DAC960_V1_CommandMailbox_T *NextCommandMailbox =
 701     Controller->V1.NextCommandMailbox;
 702   CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
 703   DAC960_PG_WriteCommandMailbox(NextCommandMailbox, CommandMailbox);
 704   if (Controller->V1.PreviousCommandMailbox1->Words[0] == 0 ||
 705       Controller->V1.PreviousCommandMailbox2->Words[0] == 0)
 706     DAC960_PG_HardwareMailboxNewCommand(ControllerBaseAddress);
 707   Controller->V1.PreviousCommandMailbox2 =
 708     Controller->V1.PreviousCommandMailbox1;
 709   Controller->V1.PreviousCommandMailbox1 = NextCommandMailbox;
 710   if (++NextCommandMailbox > Controller->V1.LastCommandMailbox)
 711     NextCommandMailbox = Controller->V1.FirstCommandMailbox;
 712   Controller->V1.NextCommandMailbox = NextCommandMailbox;
 713 }
 714
 715
 716 /*
 717   DAC960_PD_QueueCommand queues Command for DAC960 PD Series Controllers.
 718 */
 719
 720 static void DAC960_PD_QueueCommand(DAC960_Command_T *Command)
 721 {
 722   DAC960_Controller_T *Controller = Command->Controller;
 723   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
 724   DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
 725   CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
 726   while (DAC960_PD_MailboxFullP(ControllerBaseAddress))
 727     udelay(1);
 728   DAC960_PD_WriteCommandMailbox(ControllerBaseAddress, CommandMailbox);
 729   DAC960_PD_NewCommand(ControllerBaseAddress);
 730 }
 731
 732
 733 /*
 734   DAC960_P_QueueCommand queues Command for DAC960 P Series Controllers.
 735 */
 736
 737 static void DAC960_P_QueueCommand(DAC960_Command_T *Command)
 738 {
 739   DAC960_Controller_T *Controller = Command->Controller;
 740   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
 741   DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
 742   CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
 743   switch (CommandMailbox->Common.CommandOpcode)
 744     {
 745     case DAC960_V1_Enquiry:
 746       CommandMailbox->Common.CommandOpcode = DAC960_V1_Enquiry_Old;
 747       break;
 748     case DAC960_V1_GetDeviceState:
 749       CommandMailbox->Common.CommandOpcode = DAC960_V1_GetDeviceState_Old;
 750       break;
 751     case DAC960_V1_Read:
 752       CommandMailbox->Common.CommandOpcode = DAC960_V1_Read_Old;
 753       DAC960_PD_To_P_TranslateReadWriteCommand(CommandMailbox);
 754       break;
 755     case DAC960_V1_Write:
 756       CommandMailbox->Common.CommandOpcode = DAC960_V1_Write_Old;
 757       DAC960_PD_To_P_TranslateReadWriteCommand(CommandMailbox);
 758       break;
 759     case DAC960_V1_ReadWithScatterGather:
 760       CommandMailbox->Common.CommandOpcode =
 761         DAC960_V1_ReadWithScatterGather_Old;
 762       DAC960_PD_To_P_TranslateReadWriteCommand(CommandMailbox);
 763       break;
 764     case DAC960_V1_WriteWithScatterGather:
 765       CommandMailbox->Common.CommandOpcode =
 766         DAC960_V1_WriteWithScatterGather_Old;
 767       DAC960_PD_To_P_TranslateReadWriteCommand(CommandMailbox);
 768       break;
 769     default:
 770       break;
 771     }
 772   while (DAC960_PD_MailboxFullP(ControllerBaseAddress))
 773     udelay(1);
 774   DAC960_PD_WriteCommandMailbox(ControllerBaseAddress, CommandMailbox);
 775   DAC960_PD_NewCommand(ControllerBaseAddress);
 776 }
 777
 778
 779 /*
 780   DAC960_ExecuteCommand executes Command and waits for completion.
 781 */
 782
 783 static void DAC960_ExecuteCommand(DAC960_Command_T *Command)
 784 {
 785   DAC960_Controller_T *Controller = Command->Controller;
 786   DECLARE_COMPLETION_ONSTACK(Completion);
 787   unsigned long flags;
 788   Command->Completion = &Completion;
 789
 790   spin_lock_irqsave(&Controller->queue_lock, flags);
 791   DAC960_QueueCommand(Command);
 792   spin_unlock_irqrestore(&Controller->queue_lock, flags);
 793
 794   if (in_interrupt())
 795           return;
 796   wait_for_completion(&Completion);
 797 }
 798
 799
 800 /*
 801   DAC960_V1_ExecuteType3 executes a DAC960 V1 Firmware Controller Type 3
 802   Command and waits for completion.  It returns true on success and false
 803   on failure.
 804 */
 805
 806 static bool DAC960_V1_ExecuteType3(DAC960_Controller_T *Controller,
 807                                       DAC960_V1_CommandOpcode_T CommandOpcode,
 808                                       dma_addr_t DataDMA)
 809 {
 810   DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
 811   DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
 812   DAC960_V1_CommandStatus_T CommandStatus;
 813   DAC960_V1_ClearCommand(Command);
 814   Command->CommandType = DAC960_ImmediateCommand;
 815   CommandMailbox->Type3.CommandOpcode = CommandOpcode;
 816   CommandMailbox->Type3.BusAddress = DataDMA;
 817   DAC960_ExecuteCommand(Command);
 818   CommandStatus = Command->V1.CommandStatus;
 819   DAC960_DeallocateCommand(Command);
 820   return (CommandStatus == DAC960_V1_NormalCompletion);
 821 }
 822
 823
 824 /*
 825   DAC960_V1_ExecuteTypeB executes a DAC960 V1 Firmware Controller Type 3B
 826   Command and waits for completion.  It returns true on success and false
 827   on failure.
 828 */
 829
 830 static bool DAC960_V1_ExecuteType3B(DAC960_Controller_T *Controller,
 831                                        DAC960_V1_CommandOpcode_T CommandOpcode,
 832                                        unsigned char CommandOpcode2,
 833                                        dma_addr_t DataDMA)
 834 {
 835   DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
 836   DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
 837   DAC960_V1_CommandStatus_T CommandStatus;
 838   DAC960_V1_ClearCommand(Command);
 839   Command->CommandType = DAC960_ImmediateCommand;
 840   CommandMailbox->Type3B.CommandOpcode = CommandOpcode;
 841   CommandMailbox->Type3B.CommandOpcode2 = CommandOpcode2;
 842   CommandMailbox->Type3B.BusAddress = DataDMA;
 843   DAC960_ExecuteCommand(Command);
 844   CommandStatus = Command->V1.CommandStatus;
 845   DAC960_DeallocateCommand(Command);
 846   return (CommandStatus == DAC960_V1_NormalCompletion);
 847 }
 848
 849
 850 /*
 851   DAC960_V1_ExecuteType3D executes a DAC960 V1 Firmware Controller Type 3D
 852   Command and waits for completion.  It returns true on success and false
 853   on failure.
 854 */
 855
 856 static bool DAC960_V1_ExecuteType3D(DAC960_Controller_T *Controller,
 857                                        DAC960_V1_CommandOpcode_T CommandOpcode,
 858                                        unsigned char Channel,
 859                                        unsigned char TargetID,
 860                                        dma_addr_t DataDMA)
 861 {
 862   DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
 863   DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
 864   DAC960_V1_CommandStatus_T CommandStatus;
 865   DAC960_V1_ClearCommand(Command);
 866   Command->CommandType = DAC960_ImmediateCommand;
 867   CommandMailbox->Type3D.CommandOpcode = CommandOpcode;
 868   CommandMailbox->Type3D.Channel = Channel;
 869   CommandMailbox->Type3D.TargetID = TargetID;
 870   CommandMailbox->Type3D.BusAddress = DataDMA;
 871   DAC960_ExecuteCommand(Command);
 872   CommandStatus = Command->V1.CommandStatus;
 873   DAC960_DeallocateCommand(Command);
 874   return (CommandStatus == DAC960_V1_NormalCompletion);
 875 }
 876
 877
 878 /*
 879   DAC960_V2_GeneralInfo executes a DAC960 V2 Firmware General Information
 880   Reading IOCTL Command and waits for completion.  It returns true on success
 881   and false on failure.
 882
 883   Return data in The controller's HealthStatusBuffer, which is dma-able memory
 884 */
 885
 886 static bool DAC960_V2_GeneralInfo(DAC960_Controller_T *Controller)
 887 {
 888   DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
 889   DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
 890   DAC960_V2_CommandStatus_T CommandStatus;
 891   DAC960_V2_ClearCommand(Command);
 892   Command->CommandType = DAC960_ImmediateCommand;
 893   CommandMailbox->Common.CommandOpcode = DAC960_V2_IOCTL;
 894   CommandMailbox->Common.CommandControlBits
 895                         .DataTransferControllerToHost = true;
 896   CommandMailbox->Common.CommandControlBits
 897                         .NoAutoRequestSense = true;
 898   CommandMailbox->Common.DataTransferSize = sizeof(DAC960_V2_HealthStatusBuffer_T);
 899   CommandMailbox->Common.IOCTL_Opcode = DAC960_V2_GetHealthStatus;
 900   CommandMailbox->Common.DataTransferMemoryAddress
 901                         .ScatterGatherSegments[0]
 902                         .SegmentDataPointer =
 903     Controller->V2.HealthStatusBufferDMA;
 904   CommandMailbox->Common.DataTransferMemoryAddress
 905                         .ScatterGatherSegments[0]
 906                         .SegmentByteCount =
 907     CommandMailbox->Common.DataTransferSize;
 908   DAC960_ExecuteCommand(Command);
 909   CommandStatus = Command->V2.CommandStatus;
 910   DAC960_DeallocateCommand(Command);
 911   return (CommandStatus == DAC960_V2_NormalCompletion);
 912 }
 913
 914
 915 /*
 916   DAC960_V2_ControllerInfo executes a DAC960 V2 Firmware Controller
 917   Information Reading IOCTL Command and waits for completion.  It returns
 918   true on success and false on failure.
 919
 920   Data is returned in the controller's V2.NewControllerInformation dma-able
 921   memory buffer.
 922 */
 923
 924 static bool DAC960_V2_NewControllerInfo(DAC960_Controller_T *Controller)
 925 {
 926   DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
 927   DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
 928   DAC960_V2_CommandStatus_T CommandStatus;
 929   DAC960_V2_ClearCommand(Command);
 930   Command->CommandType = DAC960_ImmediateCommand;
 931   CommandMailbox->ControllerInfo.CommandOpcode = DAC960_V2_IOCTL;
 932   CommandMailbox->ControllerInfo.CommandControlBits
 933                                 .DataTransferControllerToHost = true;
 934   CommandMailbox->ControllerInfo.CommandControlBits
 935                                 .NoAutoRequestSense = true;
 936   CommandMailbox->ControllerInfo.DataTransferSize = sizeof(DAC960_V2_ControllerInfo_T);
 937   CommandMailbox->ControllerInfo.ControllerNumber = 0;
 938   CommandMailbox->ControllerInfo.IOCTL_Opcode = DAC960_V2_GetControllerInfo;
 939   CommandMailbox->ControllerInfo.DataTransferMemoryAddress
 940                                 .ScatterGatherSegments[0]
 941                                 .SegmentDataPointer =
 942         Controller->V2.NewControllerInformationDMA;
 943   CommandMailbox->ControllerInfo.DataTransferMemoryAddress
 944                                 .ScatterGatherSegments[0]
 945                                 .SegmentByteCount =
 946     CommandMailbox->ControllerInfo.DataTransferSize;
 947   DAC960_ExecuteCommand(Command);
 948   CommandStatus = Command->V2.CommandStatus;
 949   DAC960_DeallocateCommand(Command);
 950   return (CommandStatus == DAC960_V2_NormalCompletion);
 951 }
 952
 953
 954 /*
 955   DAC960_V2_LogicalDeviceInfo executes a DAC960 V2 Firmware Controller Logical
 956   Device Information Reading IOCTL Command and waits for completion.  It
 957   returns true on success and false on failure.
 958
 959   Data is returned in the controller's V2.NewLogicalDeviceInformation
 960 */
 961
 962 static bool DAC960_V2_NewLogicalDeviceInfo(DAC960_Controller_T *Controller,
 963                                            unsigned short LogicalDeviceNumber)
 964 {
 965   DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
 966   DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
 967   DAC960_V2_CommandStatus_T CommandStatus;
 968
 969   DAC960_V2_ClearCommand(Command);
 970   Command->CommandType = DAC960_ImmediateCommand;
 971   CommandMailbox->LogicalDeviceInfo.CommandOpcode =
 972                                 DAC960_V2_IOCTL;
 973   CommandMailbox->LogicalDeviceInfo.CommandControlBits
 974                                    .DataTransferControllerToHost = true;
 975   CommandMailbox->LogicalDeviceInfo.CommandControlBits
 976                                    .NoAutoRequestSense = true;
 977   CommandMailbox->LogicalDeviceInfo.DataTransferSize =
 978                                 sizeof(DAC960_V2_LogicalDeviceInfo_T);
 979   CommandMailbox->LogicalDeviceInfo.LogicalDevice.LogicalDeviceNumber =
 980     LogicalDeviceNumber;
 981   CommandMailbox->LogicalDeviceInfo.IOCTL_Opcode = DAC960_V2_GetLogicalDeviceInfoValid;
 982   CommandMailbox->LogicalDeviceInfo.DataTransferMemoryAddress
 983                                    .ScatterGatherSegments[0]
 984                                    .SegmentDataPointer =
 985         Controller->V2.NewLogicalDeviceInformationDMA;
 986   CommandMailbox->LogicalDeviceInfo.DataTransferMemoryAddress
 987                                    .ScatterGatherSegments[0]
 988                                    .SegmentByteCount =
 989     CommandMailbox->LogicalDeviceInfo.DataTransferSize;
 990   DAC960_ExecuteCommand(Command);
 991   CommandStatus = Command->V2.CommandStatus;
 992   DAC960_DeallocateCommand(Command);
 993   return (CommandStatus == DAC960_V2_NormalCompletion);
 994 }
 995
 996
 997 /*
 998   DAC960_V2_PhysicalDeviceInfo executes a DAC960 V2 Firmware Controller "Read
 999   Physical Device Information" IOCTL Command and waits for completion.  It
1000   returns true on success and false on failure.
1001
1002   The Channel, TargetID, LogicalUnit arguments should be 0 the first time
1003   this function is called for a given controller.  This will return data
1004   for the "first" device on that controller.  The returned data includes a
1005   Channel, TargetID, LogicalUnit that can be passed in to this routine to
1006   get data for the NEXT device on that controller.
1007
1008   Data is stored in the controller's V2.NewPhysicalDeviceInfo dma-able
1009   memory buffer.
1010
1011 */
1012
1013 static bool DAC960_V2_NewPhysicalDeviceInfo(DAC960_Controller_T *Controller,
1014                                             unsigned char Channel,
1015                                             unsigned char TargetID,
1016                                             unsigned char LogicalUnit)
1017 {
1018   DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
1019   DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
1020   DAC960_V2_CommandStatus_T CommandStatus;
1021
1022   DAC960_V2_ClearCommand(Command);
1023   Command->CommandType = DAC960_ImmediateCommand;
1024   CommandMailbox->PhysicalDeviceInfo.CommandOpcode = DAC960_V2_IOCTL;
1025   CommandMailbox->PhysicalDeviceInfo.CommandControlBits
1026                                     .DataTransferControllerToHost = true;
1027   CommandMailbox->PhysicalDeviceInfo.CommandControlBits
1028                                     .NoAutoRequestSense = true;
1029   CommandMailbox->PhysicalDeviceInfo.DataTransferSize =
1030                                 sizeof(DAC960_V2_PhysicalDeviceInfo_T);
1031   CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.LogicalUnit = LogicalUnit;
1032   CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.TargetID = TargetID;
1033   CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.Channel = Channel;
1034   CommandMailbox->PhysicalDeviceInfo.IOCTL_Opcode =
1035                                         DAC960_V2_GetPhysicalDeviceInfoValid;
1036   CommandMailbox->PhysicalDeviceInfo.DataTransferMemoryAddress
1037                                     .ScatterGatherSegments[0]
1038                                     .SegmentDataPointer =
1039                                         Controller->V2.NewPhysicalDeviceInformationDMA;
1040   CommandMailbox->PhysicalDeviceInfo.DataTransferMemoryAddress
1041                                     .ScatterGatherSegments[0]
1042                                     .SegmentByteCount =
1043     CommandMailbox->PhysicalDeviceInfo.DataTransferSize;
1044   DAC960_ExecuteCommand(Command);
1045   CommandStatus = Command->V2.CommandStatus;
1046   DAC960_DeallocateCommand(Command);
1047   return (CommandStatus == DAC960_V2_NormalCompletion);
1048 }
1049
1050
1051 static void DAC960_V2_ConstructNewUnitSerialNumber(
1052         DAC960_Controller_T *Controller,
1053         DAC960_V2_CommandMailbox_T *CommandMailbox, int Channel, int TargetID,
1054         int LogicalUnit)
1055 {
1056       CommandMailbox->SCSI_10.CommandOpcode = DAC960_V2_SCSI_10_Passthru;
1057       CommandMailbox->SCSI_10.CommandControlBits
1058                              .DataTransferControllerToHost = true;
1059       CommandMailbox->SCSI_10.CommandControlBits
1060                              .NoAutoRequestSense = true;
1061       CommandMailbox->SCSI_10.DataTransferSize =
1062         sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T);
1063       CommandMailbox->SCSI_10.PhysicalDevice.LogicalUnit = LogicalUnit;
1064       CommandMailbox->SCSI_10.PhysicalDevice.TargetID = TargetID;
1065       CommandMailbox->SCSI_10.PhysicalDevice.Channel = Channel;
1066       CommandMailbox->SCSI_10.CDBLength = 6;
1067       CommandMailbox->SCSI_10.SCSI_CDB[0] = 0x12; /* INQUIRY */
1068       CommandMailbox->SCSI_10.SCSI_CDB[1] = 1; /* EVPD = 1 */
1069       CommandMailbox->SCSI_10.SCSI_CDB[2] = 0x80; /* Page Code */
1070       CommandMailbox->SCSI_10.SCSI_CDB[3] = 0; /* Reserved */
1071       CommandMailbox->SCSI_10.SCSI_CDB[4] =
1072         sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T);
1073       CommandMailbox->SCSI_10.SCSI_CDB[5] = 0; /* Control */
1074       CommandMailbox->SCSI_10.DataTransferMemoryAddress
1075                              .ScatterGatherSegments[0]
1076                              .SegmentDataPointer =
1077                 Controller->V2.NewInquiryUnitSerialNumberDMA;
1078       CommandMailbox->SCSI_10.DataTransferMemoryAddress
1079                              .ScatterGatherSegments[0]
1080                              .SegmentByteCount =
1081                 CommandMailbox->SCSI_10.DataTransferSize;
1082 }
1083
1084
1085 /*
1086   DAC960_V2_NewUnitSerialNumber executes an SCSI pass-through
1087   Inquiry command to a SCSI device identified by Channel number,
1088   Target id, Logical Unit Number.  This function Waits for completion
1089   of the command.
1090
1091   The return data includes Unit Serial Number information for the
1092   specified device.
1093
1094   Data is stored in the controller's V2.NewPhysicalDeviceInfo dma-able
1095   memory buffer.
1096 */
1097
1098 static bool DAC960_V2_NewInquiryUnitSerialNumber(DAC960_Controller_T *Controller,
1099                         int Channel, int TargetID, int LogicalUnit)
1100 {
1101       DAC960_Command_T *Command;
1102       DAC960_V2_CommandMailbox_T *CommandMailbox;
1103       DAC960_V2_CommandStatus_T CommandStatus;
1104
1105       Command = DAC960_AllocateCommand(Controller);
1106       CommandMailbox = &Command->V2.CommandMailbox;
1107       DAC960_V2_ClearCommand(Command);
1108       Command->CommandType = DAC960_ImmediateCommand;
1109
1110       DAC960_V2_ConstructNewUnitSerialNumber(Controller, CommandMailbox,
1111                         Channel, TargetID, LogicalUnit);
1112
1113       DAC960_ExecuteCommand(Command);
1114       CommandStatus = Command->V2.CommandStatus;
1115       DAC960_DeallocateCommand(Command);
1116       return (CommandStatus == DAC960_V2_NormalCompletion);
1117 }
1118
1119
1120 /*
1121   DAC960_V2_DeviceOperation executes a DAC960 V2 Firmware Controller Device
1122   Operation IOCTL Command and waits for completion.  It returns true on
1123   success and false on failure.
1124 */
1125
1126 static bool DAC960_V2_DeviceOperation(DAC960_Controller_T *Controller,
1127                                          DAC960_V2_IOCTL_Opcode_T IOCTL_Opcode,
1128                                          DAC960_V2_OperationDevice_T
1129                                            OperationDevice)
1130 {
1131   DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
1132   DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
1133   DAC960_V2_CommandStatus_T CommandStatus;
1134   DAC960_V2_ClearCommand(Command);
1135   Command->CommandType = DAC960_ImmediateCommand;
1136   CommandMailbox->DeviceOperation.CommandOpcode = DAC960_V2_IOCTL;
1137   CommandMailbox->DeviceOperation.CommandControlBits
1138                                  .DataTransferControllerToHost = true;
1139   CommandMailbox->DeviceOperation.CommandControlBits
1140                                  .NoAutoRequestSense = true;
1141   CommandMailbox->DeviceOperation.IOCTL_Opcode = IOCTL_Opcode;
1142   CommandMailbox->DeviceOperation.OperationDevice = OperationDevice;
1143   DAC960_ExecuteCommand(Command);
1144   CommandStatus = Command->V2.CommandStatus;
1145   DAC960_DeallocateCommand(Command);
1146   return (CommandStatus == DAC960_V2_NormalCompletion);
1147 }
1148
1149
1150 /*
1151   DAC960_V1_EnableMemoryMailboxInterface enables the Memory Mailbox Interface
1152   for DAC960 V1 Firmware Controllers.
1153
1154   PD and P controller types have no memory mailbox, but still need the
1155   other dma mapped memory.
1156 */
1157
1158 static bool DAC960_V1_EnableMemoryMailboxInterface(DAC960_Controller_T
1159                                                       *Controller)
1160 {
1161   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
1162   DAC960_HardwareType_T hw_type = Controller->HardwareType;
1163   struct pci_dev *PCI_Device = Controller->PCIDevice;
1164   struct dma_loaf *DmaPages = &Controller->DmaPages;
1165   size_t DmaPagesSize;
1166   size_t CommandMailboxesSize;
1167   size_t StatusMailboxesSize;
1168
1169   DAC960_V1_CommandMailbox_T *CommandMailboxesMemory;
1170   dma_addr_t CommandMailboxesMemoryDMA;
1171
1172   DAC960_V1_StatusMailbox_T *StatusMailboxesMemory;
1173   dma_addr_t StatusMailboxesMemoryDMA;
1174
1175   DAC960_V1_CommandMailbox_T CommandMailbox;
1176   DAC960_V1_CommandStatus_T CommandStatus;
1177   int TimeoutCounter;
1178   int i;
1179
1180
1181   if (pci_set_dma_mask(Controller->PCIDevice, DMA_BIT_MASK(32)))
1182         return DAC960_Failure(Controller, "DMA mask out of range");
1183   Controller->BounceBufferLimit = DMA_BIT_MASK(32);
1184
1185   if ((hw_type == DAC960_PD_Controller) || (hw_type == DAC960_P_Controller)) {
1186     CommandMailboxesSize =  0;
1187     StatusMailboxesSize = 0;
1188   } else {
1189     CommandMailboxesSize =  DAC960_V1_CommandMailboxCount * sizeof(DAC960_V1_CommandMailbox_T);
1190     StatusMailboxesSize = DAC960_V1_StatusMailboxCount * sizeof(DAC960_V1_StatusMailbox_T);
1191   }
1192   DmaPagesSize = CommandMailboxesSize + StatusMailboxesSize +
1193         sizeof(DAC960_V1_DCDB_T) + sizeof(DAC960_V1_Enquiry_T) +
1194         sizeof(DAC960_V1_ErrorTable_T) + sizeof(DAC960_V1_EventLogEntry_T) +
1195         sizeof(DAC960_V1_RebuildProgress_T) +
1196         sizeof(DAC960_V1_LogicalDriveInformationArray_T) +
1197         sizeof(DAC960_V1_BackgroundInitializationStatus_T) +
1198         sizeof(DAC960_V1_DeviceState_T) + sizeof(DAC960_SCSI_Inquiry_T) +
1199         sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T);
1200
1201   if (!init_dma_loaf(PCI_Device, DmaPages, DmaPagesSize))
1202         return false;
1203
1204
1205   if ((hw_type == DAC960_PD_Controller) || (hw_type == DAC960_P_Controller))
1206         goto skip_mailboxes;
1207
1208   CommandMailboxesMemory = slice_dma_loaf(DmaPages,
1209                 CommandMailboxesSize, &CommandMailboxesMemoryDMA);
1210
1211   /* These are the base addresses for the command memory mailbox array */
1212   Controller->V1.FirstCommandMailbox = CommandMailboxesMemory;
1213   Controller->V1.FirstCommandMailboxDMA = CommandMailboxesMemoryDMA;
1214
1215   CommandMailboxesMemory += DAC960_V1_CommandMailboxCount - 1;
1216   Controller->V1.LastCommandMailbox = CommandMailboxesMemory;
1217   Controller->V1.NextCommandMailbox = Controller->V1.FirstCommandMailbox;
1218   Controller->V1.PreviousCommandMailbox1 = Controller->V1.LastCommandMailbox;
1219   Controller->V1.PreviousCommandMailbox2 =
1220                                         Controller->V1.LastCommandMailbox - 1;
1221
1222   /* These are the base addresses for the status memory mailbox array */
1223   StatusMailboxesMemory = slice_dma_loaf(DmaPages,
1224                 StatusMailboxesSize, &StatusMailboxesMemoryDMA);
1225
1226   Controller->V1.FirstStatusMailbox = StatusMailboxesMemory;
1227   Controller->V1.FirstStatusMailboxDMA = StatusMailboxesMemoryDMA;
1228   StatusMailboxesMemory += DAC960_V1_StatusMailboxCount - 1;
1229   Controller->V1.LastStatusMailbox = StatusMailboxesMemory;
1230   Controller->V1.NextStatusMailbox = Controller->V1.FirstStatusMailbox;
1231
1232 skip_mailboxes:
1233   Controller->V1.MonitoringDCDB = slice_dma_loaf(DmaPages,
1234                 sizeof(DAC960_V1_DCDB_T),
1235                 &Controller->V1.MonitoringDCDB_DMA);
1236
1237   Controller->V1.NewEnquiry = slice_dma_loaf(DmaPages,
1238                 sizeof(DAC960_V1_Enquiry_T),
1239                 &Controller->V1.NewEnquiryDMA);
1240
1241   Controller->V1.NewErrorTable = slice_dma_loaf(DmaPages,
1242                 sizeof(DAC960_V1_ErrorTable_T),
1243                 &Controller->V1.NewErrorTableDMA);
1244
1245   Controller->V1.EventLogEntry = slice_dma_loaf(DmaPages,
1246                 sizeof(DAC960_V1_EventLogEntry_T),
1247                 &Controller->V1.EventLogEntryDMA);
1248
1249   Controller->V1.RebuildProgress = slice_dma_loaf(DmaPages,
1250                 sizeof(DAC960_V1_RebuildProgress_T),
1251                 &Controller->V1.RebuildProgressDMA);
1252
1253   Controller->V1.NewLogicalDriveInformation = slice_dma_loaf(DmaPages,
1254                 sizeof(DAC960_V1_LogicalDriveInformationArray_T),
1255                 &Controller->V1.NewLogicalDriveInformationDMA);
1256
1257   Controller->V1.BackgroundInitializationStatus = slice_dma_loaf(DmaPages,
1258                 sizeof(DAC960_V1_BackgroundInitializationStatus_T),
1259                 &Controller->V1.BackgroundInitializationStatusDMA);
1260
1261   Controller->V1.NewDeviceState = slice_dma_loaf(DmaPages,
1262                 sizeof(DAC960_V1_DeviceState_T),
1263                 &Controller->V1.NewDeviceStateDMA);
1264
1265   Controller->V1.NewInquiryStandardData = slice_dma_loaf(DmaPages,
1266                 sizeof(DAC960_SCSI_Inquiry_T),
1267                 &Controller->V1.NewInquiryStandardDataDMA);
1268
1269   Controller->V1.NewInquiryUnitSerialNumber = slice_dma_loaf(DmaPages,
1270                 sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T),
1271                 &Controller->V1.NewInquiryUnitSerialNumberDMA);
1272
1273   if ((hw_type == DAC960_PD_Controller) || (hw_type == DAC960_P_Controller))
1274         return true;
1275
1276   /* Enable the Memory Mailbox Interface. */
1277   Controller->V1.DualModeMemoryMailboxInterface = true;
1278   CommandMailbox.TypeX.CommandOpcode = 0x2B;
1279   CommandMailbox.TypeX.CommandIdentifier = 0;
1280   CommandMailbox.TypeX.CommandOpcode2 = 0x14;
1281   CommandMailbox.TypeX.CommandMailboxesBusAddress =
1282                                 Controller->V1.FirstCommandMailboxDMA;
1283   CommandMailbox.TypeX.StatusMailboxesBusAddress =
1284                                 Controller->V1.FirstStatusMailboxDMA;
1285 #define TIMEOUT_COUNT 1000000
1286
1287   for (i = 0; i < 2; i++)
1288     switch (Controller->HardwareType)
1289       {
1290       case DAC960_LA_Controller:
1291         TimeoutCounter = TIMEOUT_COUNT;
1292         while (--TimeoutCounter >= 0)
1293           {
1294             if (!DAC960_LA_HardwareMailboxFullP(ControllerBaseAddress))
1295               break;
1296             udelay(10);
1297           }
1298         if (TimeoutCounter < 0) return false;
1299         DAC960_LA_WriteHardwareMailbox(ControllerBaseAddress, &CommandMailbox);
1300         DAC960_LA_HardwareMailboxNewCommand(ControllerBaseAddress);
1301         TimeoutCounter = TIMEOUT_COUNT;
1302         while (--TimeoutCounter >= 0)
1303           {
1304             if (DAC960_LA_HardwareMailboxStatusAvailableP(
1305                   ControllerBaseAddress))
1306               break;
1307             udelay(10);
1308           }
1309         if (TimeoutCounter < 0) return false;
1310         CommandStatus = DAC960_LA_ReadStatusRegister(ControllerBaseAddress);
1311         DAC960_LA_AcknowledgeHardwareMailboxInterrupt(ControllerBaseAddress);
1312         DAC960_LA_AcknowledgeHardwareMailboxStatus(ControllerBaseAddress);
1313         if (CommandStatus == DAC960_V1_NormalCompletion) return true;
1314         Controller->V1.DualModeMemoryMailboxInterface = false;
1315         CommandMailbox.TypeX.CommandOpcode2 = 0x10;
1316         break;
1317       case DAC960_PG_Controller:
1318         TimeoutCounter = TIMEOUT_COUNT;
1319         while (--TimeoutCounter >= 0)
1320           {
1321             if (!DAC960_PG_HardwareMailboxFullP(ControllerBaseAddress))
1322               break;
1323             udelay(10);
1324           }
1325         if (TimeoutCounter < 0) return false;
1326         DAC960_PG_WriteHardwareMailbox(ControllerBaseAddress, &CommandMailbox);
1327         DAC960_PG_HardwareMailboxNewCommand(ControllerBaseAddress);
1328
1329         TimeoutCounter = TIMEOUT_COUNT;
1330         while (--TimeoutCounter >= 0)
1331           {
1332             if (DAC960_PG_HardwareMailboxStatusAvailableP(
1333                   ControllerBaseAddress))
1334               break;
1335             udelay(10);
1336           }
1337         if (TimeoutCounter < 0) return false;
1338         CommandStatus = DAC960_PG_ReadStatusRegister(ControllerBaseAddress);
1339         DAC960_PG_AcknowledgeHardwareMailboxInterrupt(ControllerBaseAddress);
1340         DAC960_PG_AcknowledgeHardwareMailboxStatus(ControllerBaseAddress);
1341         if (CommandStatus == DAC960_V1_NormalCompletion) return true;
1342         Controller->V1.DualModeMemoryMailboxInterface = false;
1343         CommandMailbox.TypeX.CommandOpcode2 = 0x10;
1344         break;
1345       default:
1346         DAC960_Failure(Controller, "Unknown Controller Type\n");
1347         break;
1348       }
1349   return false;
1350 }
1351
1352
1353 /*
1354   DAC960_V2_EnableMemoryMailboxInterface enables the Memory Mailbox Interface
1355   for DAC960 V2 Firmware Controllers.
1356
1357   Aggregate the space needed for the controller's memory mailbox and
1358   the other data structures that will be targets of dma transfers with
1359   the controller.  Allocate a dma-mapped region of memory to hold these
1360   structures.  Then, save CPU pointers and dma_addr_t values to reference
1361   the structures that are contained in that region.
1362 */
1363
1364 static bool DAC960_V2_EnableMemoryMailboxInterface(DAC960_Controller_T
1365                                                       *Controller)
1366 {
1367   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
1368   struct pci_dev *PCI_Device = Controller->PCIDevice;
1369   struct dma_loaf *DmaPages = &Controller->DmaPages;
1370   size_t DmaPagesSize;
1371   size_t CommandMailboxesSize;
1372   size_t StatusMailboxesSize;
1373
1374   DAC960_V2_CommandMailbox_T *CommandMailboxesMemory;
1375   dma_addr_t CommandMailboxesMemoryDMA;
1376
1377   DAC960_V2_StatusMailbox_T *StatusMailboxesMemory;
1378   dma_addr_t StatusMailboxesMemoryDMA;
1379
1380   DAC960_V2_CommandMailbox_T *CommandMailbox;
1381   dma_addr_t    CommandMailboxDMA;
1382   DAC960_V2_CommandStatus_T CommandStatus;
1383
1384         if (!pci_set_dma_mask(Controller->PCIDevice, DMA_BIT_MASK(64)))
1385                 Controller->BounceBufferLimit = DMA_BIT_MASK(64);
1386         else if (!pci_set_dma_mask(Controller->PCIDevice, DMA_BIT_MASK(32)))
1387                 Controller->BounceBufferLimit = DMA_BIT_MASK(32);
1388         else
1389                 return DAC960_Failure(Controller, "DMA mask out of range");
1390
1391   /* This is a temporary dma mapping, used only in the scope of this function */
1392   CommandMailbox = pci_alloc_consistent(PCI_Device,
1393                 sizeof(DAC960_V2_CommandMailbox_T), &CommandMailboxDMA);
1394   if (CommandMailbox == NULL)
1395           return false;
1396
1397   CommandMailboxesSize = DAC960_V2_CommandMailboxCount * sizeof(DAC960_V2_CommandMailbox_T);
1398   StatusMailboxesSize = DAC960_V2_StatusMailboxCount * sizeof(DAC960_V2_StatusMailbox_T);
1399   DmaPagesSize =
1400     CommandMailboxesSize + StatusMailboxesSize +
1401     sizeof(DAC960_V2_HealthStatusBuffer_T) +
1402     sizeof(DAC960_V2_ControllerInfo_T) +
1403     sizeof(DAC960_V2_LogicalDeviceInfo_T) +
1404     sizeof(DAC960_V2_PhysicalDeviceInfo_T) +
1405     sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T) +
1406     sizeof(DAC960_V2_Event_T) +
1407     sizeof(DAC960_V2_PhysicalToLogicalDevice_T);
1408
1409   if (!init_dma_loaf(PCI_Device, DmaPages, DmaPagesSize)) {
1410         pci_free_consistent(PCI_Device, sizeof(DAC960_V2_CommandMailbox_T),
1411                                         CommandMailbox, CommandMailboxDMA);
1412         return false;
1413   }
1414
1415   CommandMailboxesMemory = slice_dma_loaf(DmaPages,
1416                 CommandMailboxesSize, &CommandMailboxesMemoryDMA);
1417
1418   /* These are the base addresses for the command memory mailbox array */
1419   Controller->V2.FirstCommandMailbox = CommandMailboxesMemory;
1420   Controller->V2.FirstCommandMailboxDMA = CommandMailboxesMemoryDMA;
1421
1422   CommandMailboxesMemory += DAC960_V2_CommandMailboxCount - 1;
1423   Controller->V2.LastCommandMailbox = CommandMailboxesMemory;
1424   Controller->V2.NextCommandMailbox = Controller->V2.FirstCommandMailbox;
1425   Controller->V2.PreviousCommandMailbox1 = Controller->V2.LastCommandMailbox;
1426   Controller->V2.PreviousCommandMailbox2 =
1427                                         Controller->V2.LastCommandMailbox - 1;
1428
1429   /* These are the base addresses for the status memory mailbox array */
1430   StatusMailboxesMemory = slice_dma_loaf(DmaPages,
1431                 StatusMailboxesSize, &StatusMailboxesMemoryDMA);
1432
1433   Controller->V2.FirstStatusMailbox = StatusMailboxesMemory;
1434   Controller->V2.FirstStatusMailboxDMA = StatusMailboxesMemoryDMA;
1435   StatusMailboxesMemory += DAC960_V2_StatusMailboxCount - 1;
1436   Controller->V2.LastStatusMailbox = StatusMailboxesMemory;
1437   Controller->V2.NextStatusMailbox = Controller->V2.FirstStatusMailbox;
1438
1439   Controller->V2.HealthStatusBuffer = slice_dma_loaf(DmaPages,
1440                 sizeof(DAC960_V2_HealthStatusBuffer_T),
1441                 &Controller->V2.HealthStatusBufferDMA);
1442
1443   Controller->V2.NewControllerInformation = slice_dma_loaf(DmaPages,
1444                 sizeof(DAC960_V2_ControllerInfo_T),
1445                 &Controller->V2.NewControllerInformationDMA);
1446
1447   Controller->V2.NewLogicalDeviceInformation =  slice_dma_loaf(DmaPages,
1448                 sizeof(DAC960_V2_LogicalDeviceInfo_T),
1449                 &Controller->V2.NewLogicalDeviceInformationDMA);
1450
1451   Controller->V2.NewPhysicalDeviceInformation = slice_dma_loaf(DmaPages,
1452                 sizeof(DAC960_V2_PhysicalDeviceInfo_T),
1453                 &Controller->V2.NewPhysicalDeviceInformationDMA);
1454
1455   Controller->V2.NewInquiryUnitSerialNumber = slice_dma_loaf(DmaPages,
1456                 sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T),
1457                 &Controller->V2.NewInquiryUnitSerialNumberDMA);
1458
1459   Controller->V2.Event = slice_dma_loaf(DmaPages,
1460                 sizeof(DAC960_V2_Event_T),
1461                 &Controller->V2.EventDMA);
1462
1463   Controller->V2.PhysicalToLogicalDevice = slice_dma_loaf(DmaPages,
1464                 sizeof(DAC960_V2_PhysicalToLogicalDevice_T),
1465                 &Controller->V2.PhysicalToLogicalDeviceDMA);
1466
1467   /*
1468     Enable the Memory Mailbox Interface.
1469
1470     I don't know why we can't just use one of the memory mailboxes
1471     we just allocated to do this, instead of using this temporary one.
1472     Try this change later.
1473   */
1474   memset(CommandMailbox, 0, sizeof(DAC960_V2_CommandMailbox_T));
1475   CommandMailbox->SetMemoryMailbox.CommandIdentifier = 1;
1476   CommandMailbox->SetMemoryMailbox.CommandOpcode = DAC960_V2_IOCTL;
1477   CommandMailbox->SetMemoryMailbox.CommandControlBits.NoAutoRequestSense = true;
1478   CommandMailbox->SetMemoryMailbox.FirstCommandMailboxSizeKB =
1479     (DAC960_V2_CommandMailboxCount * sizeof(DAC960_V2_CommandMailbox_T)) >> 10;
1480   CommandMailbox->SetMemoryMailbox.FirstStatusMailboxSizeKB =
1481     (DAC960_V2_StatusMailboxCount * sizeof(DAC960_V2_StatusMailbox_T)) >> 10;
1482   CommandMailbox->SetMemoryMailbox.SecondCommandMailboxSizeKB = 0;
1483   CommandMailbox->SetMemoryMailbox.SecondStatusMailboxSizeKB = 0;
1484   CommandMailbox->SetMemoryMailbox.RequestSenseSize = 0;
1485   CommandMailbox->SetMemoryMailbox.IOCTL_Opcode = DAC960_V2_SetMemoryMailbox;
1486   CommandMailbox->SetMemoryMailbox.HealthStatusBufferSizeKB = 1;
1487   CommandMailbox->SetMemoryMailbox.HealthStatusBufferBusAddress =
1488                                         Controller->V2.HealthStatusBufferDMA;
1489   CommandMailbox->SetMemoryMailbox.FirstCommandMailboxBusAddress =
1490                                         Controller->V2.FirstCommandMailboxDMA;
1491   CommandMailbox->SetMemoryMailbox.FirstStatusMailboxBusAddress =
1492                                         Controller->V2.FirstStatusMailboxDMA;
1493   switch (Controller->HardwareType)
1494     {
1495     case DAC960_GEM_Controller:
1496       while (DAC960_GEM_HardwareMailboxFullP(ControllerBaseAddress))
1497         udelay(1);
1498       DAC960_GEM_WriteHardwareMailbox(ControllerBaseAddress, CommandMailboxDMA);
1499       DAC960_GEM_HardwareMailboxNewCommand(ControllerBaseAddress);
1500       while (!DAC960_GEM_HardwareMailboxStatusAvailableP(ControllerBaseAddress))
1501         udelay(1);
1502       CommandStatus = DAC960_GEM_ReadCommandStatus(ControllerBaseAddress);
1503       DAC960_GEM_AcknowledgeHardwareMailboxInterrupt(ControllerBaseAddress);
1504       DAC960_GEM_AcknowledgeHardwareMailboxStatus(ControllerBaseAddress);
1505       break;
1506     case DAC960_BA_Controller:
1507       while (DAC960_BA_HardwareMailboxFullP(ControllerBaseAddress))
1508         udelay(1);
1509       DAC960_BA_WriteHardwareMailbox(ControllerBaseAddress, CommandMailboxDMA);
1510       DAC960_BA_HardwareMailboxNewCommand(ControllerBaseAddress);
1511       while (!DAC960_BA_HardwareMailboxStatusAvailableP(ControllerBaseAddress))
1512         udelay(1);
1513       CommandStatus = DAC960_BA_ReadCommandStatus(ControllerBaseAddress);
1514       DAC960_BA_AcknowledgeHardwareMailboxInterrupt(ControllerBaseAddress);
1515       DAC960_BA_AcknowledgeHardwareMailboxStatus(ControllerBaseAddress);
1516       break;
1517     case DAC960_LP_Controller:
1518       while (DAC960_LP_HardwareMailboxFullP(ControllerBaseAddress))
1519         udelay(1);
1520       DAC960_LP_WriteHardwareMailbox(ControllerBaseAddress, CommandMailboxDMA);
1521       DAC960_LP_HardwareMailboxNewCommand(ControllerBaseAddress);
1522       while (!DAC960_LP_HardwareMailboxStatusAvailableP(ControllerBaseAddress))
1523         udelay(1);
1524       CommandStatus = DAC960_LP_ReadCommandStatus(ControllerBaseAddress);
1525       DAC960_LP_AcknowledgeHardwareMailboxInterrupt(ControllerBaseAddress);
1526       DAC960_LP_AcknowledgeHardwareMailboxStatus(ControllerBaseAddress);
1527       break;
1528     default:
1529       DAC960_Failure(Controller, "Unknown Controller Type\n");
1530       CommandStatus = DAC960_V2_AbormalCompletion;
1531       break;
1532     }
1533   pci_free_consistent(PCI_Device, sizeof(DAC960_V2_CommandMailbox_T),
1534                                         CommandMailbox, CommandMailboxDMA);
1535   return (CommandStatus == DAC960_V2_NormalCompletion);
1536 }
1537
1538
1539 /*
1540   DAC960_V1_ReadControllerConfiguration reads the Configuration Information
1541   from DAC960 V1 Firmware Controllers and initializes the Controller structure.
1542 */
1543
1544 static bool DAC960_V1_ReadControllerConfiguration(DAC960_Controller_T
1545                                                      *Controller)
1546 {
1547   DAC960_V1_Enquiry2_T *Enquiry2;
1548   dma_addr_t Enquiry2DMA;
1549   DAC960_V1_Config2_T *Config2;
1550   dma_addr_t Config2DMA;
1551   int LogicalDriveNumber, Channel, TargetID;
1552   struct dma_loaf local_dma;
1553
1554   if (!init_dma_loaf(Controller->PCIDevice, &local_dma,
1555                 sizeof(DAC960_V1_Enquiry2_T) + sizeof(DAC960_V1_Config2_T)))
1556         return DAC960_Failure(Controller, "LOGICAL DEVICE ALLOCATION");
1557
1558   Enquiry2 = slice_dma_loaf(&local_dma, sizeof(DAC960_V1_Enquiry2_T), &Enquiry2DMA);
1559   Config2 = slice_dma_loaf(&local_dma, sizeof(DAC960_V1_Config2_T), &Config2DMA);
1560
1561   if (!DAC960_V1_ExecuteType3(Controller, DAC960_V1_Enquiry,
1562                               Controller->V1.NewEnquiryDMA)) {
1563     free_dma_loaf(Controller->PCIDevice, &local_dma);
1564     return DAC960_Failure(Controller, "ENQUIRY");
1565   }
1566   memcpy(&Controller->V1.Enquiry, Controller->V1.NewEnquiry,
1567                                                 sizeof(DAC960_V1_Enquiry_T));
1568
1569   if (!DAC960_V1_ExecuteType3(Controller, DAC960_V1_Enquiry2, Enquiry2DMA)) {
1570     free_dma_loaf(Controller->PCIDevice, &local_dma);
1571     return DAC960_Failure(Controller, "ENQUIRY2");
1572   }
1573
1574   if (!DAC960_V1_ExecuteType3(Controller, DAC960_V1_ReadConfig2, Config2DMA)) {
1575     free_dma_loaf(Controller->PCIDevice, &local_dma);
1576     return DAC960_Failure(Controller, "READ CONFIG2");
1577   }
1578
1579   if (!DAC960_V1_ExecuteType3(Controller, DAC960_V1_GetLogicalDriveInformation,
1580                               Controller->V1.NewLogicalDriveInformationDMA)) {
1581     free_dma_loaf(Controller->PCIDevice, &local_dma);
1582     return DAC960_Failure(Controller, "GET LOGICAL DRIVE INFORMATION");
1583   }
1584   memcpy(&Controller->V1.LogicalDriveInformation,
1585                 Controller->V1.NewLogicalDriveInformation,
1586                 sizeof(DAC960_V1_LogicalDriveInformationArray_T));
1587
1588   for (Channel = 0; Channel < Enquiry2->ActualChannels; Channel++)
1589     for (TargetID = 0; TargetID < Enquiry2->MaxTargets; TargetID++) {
1590       if (!DAC960_V1_ExecuteType3D(Controller, DAC960_V1_GetDeviceState,
1591                                    Channel, TargetID,
1592                                    Controller->V1.NewDeviceStateDMA)) {
1593                 free_dma_loaf(Controller->PCIDevice, &local_dma);
1594                 return DAC960_Failure(Controller, "GET DEVICE STATE");
1595         }
1596         memcpy(&Controller->V1.DeviceState[Channel][TargetID],
1597                 Controller->V1.NewDeviceState, sizeof(DAC960_V1_DeviceState_T));
1598      }
1599   /*
1600     Initialize the Controller Model Name and Full Model Name fields.
1601   */
1602   switch (Enquiry2->HardwareID.SubModel)
1603     {
1604     case DAC960_V1_P_PD_PU:
1605       if (Enquiry2->SCSICapability.BusSpeed == DAC960_V1_Ultra)
1606         strcpy(Controller->ModelName, "DAC960PU");
1607       else strcpy(Controller->ModelName, "DAC960PD");
1608       break;
1609     case DAC960_V1_PL:
1610       strcpy(Controller->ModelName, "DAC960PL");
1611       break;
1612     case DAC960_V1_PG:
1613       strcpy(Controller->ModelName, "DAC960PG");
1614       break;
1615     case DAC960_V1_PJ:
1616       strcpy(Controller->ModelName, "DAC960PJ");
1617       break;
1618     case DAC960_V1_PR:
1619       strcpy(Controller->ModelName, "DAC960PR");
1620       break;
1621     case DAC960_V1_PT:
1622       strcpy(Controller->ModelName, "DAC960PT");
1623       break;
1624     case DAC960_V1_PTL0:
1625       strcpy(Controller->ModelName, "DAC960PTL0");
1626       break;
1627     case DAC960_V1_PRL:
1628       strcpy(Controller->ModelName, "DAC960PRL");
1629       break;
1630     case DAC960_V1_PTL1:
1631       strcpy(Controller->ModelName, "DAC960PTL1");
1632       break;
1633     case DAC960_V1_1164P:
1634       strcpy(Controller->ModelName, "DAC1164P");
1635       break;
1636     default:
1637       free_dma_loaf(Controller->PCIDevice, &local_dma);
1638       return DAC960_Failure(Controller, "MODEL VERIFICATION");
1639     }
1640   strcpy(Controller->FullModelName, "Mylex ");
1641   strcat(Controller->FullModelName, Controller->ModelName);
1642   /*
1643     Initialize the Controller Firmware Version field and verify that it
1644     is a supported firmware version.  The supported firmware versions are:
1645
1646     DAC1164P                5.06 and above
1647     DAC960PTL/PRL/PJ/PG     4.06 and above
1648     DAC960PU/PD/PL          3.51 and above
1649     DAC960PU/PD/PL/P        2.73 and above
1650   */
1651 #if defined(CONFIG_ALPHA)
1652   /*
1653     DEC Alpha machines were often equipped with DAC960 cards that were
1654     OEMed from Mylex, and had their own custom firmware. Version 2.70,
1655     the last custom FW revision to be released by DEC for these older
1656     controllers, appears to work quite well with this driver.
1657
1658     Cards tested successfully were several versions each of the PD and
1659     PU, called by DEC the KZPSC and KZPAC, respectively, and having
1660     the Manufacturer Numbers (from Mylex), usually on a sticker on the
1661     back of the board, of:
1662
1663     KZPSC:  D040347 (1-channel) or D040348 (2-channel) or D040349 (3-channel)
1664     KZPAC:  D040395 (1-channel) or D040396 (2-channel) or D040397 (3-channel)
1665   */
1666 # define FIRMWARE_27X   "2.70"
1667 #else
1668 # define FIRMWARE_27X   "2.73"
1669 #endif
1670
1671   if (Enquiry2->FirmwareID.MajorVersion == 0)
1672     {
1673       Enquiry2->FirmwareID.MajorVersion =
1674         Controller->V1.Enquiry.MajorFirmwareVersion;
1675       Enquiry2->FirmwareID.MinorVersion =
1676         Controller->V1.Enquiry.MinorFirmwareVersion;
1677       Enquiry2->FirmwareID.FirmwareType = '0';
1678       Enquiry2->FirmwareID.TurnID = 0;
1679     }
1680   sprintf(Controller->FirmwareVersion, "%d.%02d-%c-%02d",
1681           Enquiry2->FirmwareID.MajorVersion, Enquiry2->FirmwareID.MinorVersion,
1682           Enquiry2->FirmwareID.FirmwareType, Enquiry2->FirmwareID.TurnID);
1683   if (!((Controller->FirmwareVersion[0] == '5' &&
1684          strcmp(Controller->FirmwareVersion, "5.06") >= 0) ||
1685         (Controller->FirmwareVersion[0] == '4' &&
1686          strcmp(Controller->FirmwareVersion, "4.06") >= 0) ||
1687         (Controller->FirmwareVersion[0] == '3' &&
1688          strcmp(Controller->FirmwareVersion, "3.51") >= 0) ||
1689         (Controller->FirmwareVersion[0] == '2' &&
1690          strcmp(Controller->FirmwareVersion, FIRMWARE_27X) >= 0)))
1691     {
1692       DAC960_Failure(Controller, "FIRMWARE VERSION VERIFICATION");
1693       DAC960_Error("Firmware Version = '%s'\n", Controller,
1694                    Controller->FirmwareVersion);
1695       free_dma_loaf(Controller->PCIDevice, &local_dma);
1696       return false;
1697     }
1698   /*
1699     Initialize the Controller Channels, Targets, Memory Size, and SAF-TE
1700     Enclosure Management Enabled fields.
1701   */
1702   Controller->Channels = Enquiry2->ActualChannels;
1703   Controller->Targets = Enquiry2->MaxTargets;
1704   Controller->MemorySize = Enquiry2->MemorySize >> 20;
1705   Controller->V1.SAFTE_EnclosureManagementEnabled =
1706     (Enquiry2->FaultManagementType == DAC960_V1_SAFTE);
1707   /*
1708     Initialize the Controller Queue Depth, Driver Queue Depth, Logical Drive
1709     Count, Maximum Blocks per Command, Controller Scatter/Gather Limit, and
1710     Driver Scatter/Gather Limit.  The Driver Queue Depth must be at most one
1711     less than the Controller Queue Depth to allow for an automatic drive
1712     rebuild operation.
1713   */
1714   Controller->ControllerQueueDepth = Controller->V1.Enquiry.MaxCommands;
1715   Controller->DriverQueueDepth = Controller->ControllerQueueDepth - 1;
1716   if (Controller->DriverQueueDepth > DAC960_MaxDriverQueueDepth)
1717     Controller->DriverQueueDepth = DAC960_MaxDriverQueueDepth;
1718   Controller->LogicalDriveCount =
1719     Controller->V1.Enquiry.NumberOfLogicalDrives;
1720   Controller->MaxBlocksPerCommand = Enquiry2->MaxBlocksPerCommand;
1721   Controller->ControllerScatterGatherLimit = Enquiry2->MaxScatterGatherEntries;
1722   Controller->DriverScatterGatherLimit =
1723     Controller->ControllerScatterGatherLimit;
1724   if (Controller->DriverScatterGatherLimit > DAC960_V1_ScatterGatherLimit)
1725     Controller->DriverScatterGatherLimit = DAC960_V1_ScatterGatherLimit;
1726   /*
1727     Initialize the Stripe Size, Segment Size, and Geometry Translation.
1728   */
1729   Controller->V1.StripeSize = Config2->BlocksPerStripe * Config2->BlockFactor
1730                               >> (10 - DAC960_BlockSizeBits);
1731   Controller->V1.SegmentSize = Config2->BlocksPerCacheLine * Config2->BlockFactor
1732                                >> (10 - DAC960_BlockSizeBits);
1733   switch (Config2->DriveGeometry)
1734     {
1735     case DAC960_V1_Geometry_128_32:
1736       Controller->V1.GeometryTranslationHeads = 128;
1737       Controller->V1.GeometryTranslationSectors = 32;
1738       break;
1739     case DAC960_V1_Geometry_255_63:
1740       Controller->V1.GeometryTranslationHeads = 255;
1741       Controller->V1.GeometryTranslationSectors = 63;
1742       break;
1743     default:
1744       free_dma_loaf(Controller->PCIDevice, &local_dma);
1745       return DAC960_Failure(Controller, "CONFIG2 DRIVE GEOMETRY");
1746     }
1747   /*
1748     Initialize the Background Initialization Status.
1749   */
1750   if ((Controller->FirmwareVersion[0] == '4' &&
1751       strcmp(Controller->FirmwareVersion, "4.08") >= 0) ||
1752       (Controller->FirmwareVersion[0] == '5' &&
1753        strcmp(Controller->FirmwareVersion, "5.08") >= 0))
1754     {
1755       Controller->V1.BackgroundInitializationStatusSupported = true;
1756       DAC960_V1_ExecuteType3B(Controller,
1757                               DAC960_V1_BackgroundInitializationControl, 0x20,
1758                               Controller->
1759                                V1.BackgroundInitializationStatusDMA);
1760       memcpy(&Controller->V1.LastBackgroundInitializationStatus,
1761                 Controller->V1.BackgroundInitializationStatus,
1762                 sizeof(DAC960_V1_BackgroundInitializationStatus_T));
1763     }
1764   /*
1765     Initialize the Logical Drive Initially Accessible flag.
1766   */
1767   for (LogicalDriveNumber = 0;
1768        LogicalDriveNumber < Controller->LogicalDriveCount;
1769        LogicalDriveNumber++)
1770     if (Controller->V1.LogicalDriveInformation
1771                        [LogicalDriveNumber].LogicalDriveState !=
1772         DAC960_V1_LogicalDrive_Offline)
1773       Controller->LogicalDriveInitiallyAccessible[LogicalDriveNumber] = true;
1774   Controller->V1.LastRebuildStatus = DAC960_V1_NoRebuildOrCheckInProgress;
1775   free_dma_loaf(Controller->PCIDevice, &local_dma);
1776   return true;
1777 }
1778
1779
1780 /*
1781   DAC960_V2_ReadControllerConfiguration reads the Configuration Information
1782   from DAC960 V2 Firmware Controllers and initializes the Controller structure.
1783 */
1784
1785 static bool DAC960_V2_ReadControllerConfiguration(DAC960_Controller_T
1786                                                      *Controller)
1787 {
1788   DAC960_V2_ControllerInfo_T *ControllerInfo =
1789                 &Controller->V2.ControllerInformation;
1790   unsigned short LogicalDeviceNumber = 0;
1791   int ModelNameLength;
1792
1793   /* Get data into dma-able area, then copy into permanent location */
1794   if (!DAC960_V2_NewControllerInfo(Controller))
1795     return DAC960_Failure(Controller, "GET CONTROLLER INFO");
1796   memcpy(ControllerInfo, Controller->V2.NewControllerInformation,
1797                         sizeof(DAC960_V2_ControllerInfo_T));
1798
1799
1800   if (!DAC960_V2_GeneralInfo(Controller))
1801     return DAC960_Failure(Controller, "GET HEALTH STATUS");
1802
1803   /*
1804     Initialize the Controller Model Name and Full Model Name fields.
1805   */
1806   ModelNameLength = sizeof(ControllerInfo->ControllerName);
1807   if (ModelNameLength > sizeof(Controller->ModelName)-1)
1808     ModelNameLength = sizeof(Controller->ModelName)-1;
1809   memcpy(Controller->ModelName, ControllerInfo->ControllerName,
1810          ModelNameLength);
1811   ModelNameLength--;
1812   while (Controller->ModelName[ModelNameLength] == ' ' ||
1813          Controller->ModelName[ModelNameLength] == '\0')
1814     ModelNameLength--;
1815   Controller->ModelName[++ModelNameLength] = '\0';
1816   strcpy(Controller->FullModelName, "Mylex ");
1817   strcat(Controller->FullModelName, Controller->ModelName);
1818   /*
1819     Initialize the Controller Firmware Version field.
1820   */
1821   sprintf(Controller->FirmwareVersion, "%d.%02d-%02d",
1822           ControllerInfo->FirmwareMajorVersion,
1823           ControllerInfo->FirmwareMinorVersion,
1824           ControllerInfo->FirmwareTurnNumber);
1825   if (ControllerInfo->FirmwareMajorVersion == 6 &&
1826       ControllerInfo->FirmwareMinorVersion == 0 &&
1827       ControllerInfo->FirmwareTurnNumber < 1)
1828     {
1829       DAC960_Info("FIRMWARE VERSION %s DOES NOT PROVIDE THE CONTROLLER\n",
1830                   Controller, Controller->FirmwareVersion);
1831       DAC960_Info("STATUS MONITORING FUNCTIONALITY NEEDED BY THIS DRIVER.\n",
1832                   Controller);
1833       DAC960_Info("PLEASE UPGRADE TO VERSION 6.00-01 OR ABOVE.\n",
1834                   Controller);
1835     }
1836   /*
1837     Initialize the Controller Channels, Targets, and Memory Size.
1838   */
1839   Controller->Channels = ControllerInfo->NumberOfPhysicalChannelsPresent;
1840   Controller->Targets =
1841     ControllerInfo->MaximumTargetsPerChannel
1842                     [ControllerInfo->NumberOfPhysicalChannelsPresent-1];
1843   Controller->MemorySize = ControllerInfo->MemorySizeMB;
1844   /*
1845     Initialize the Controller Queue Depth, Driver Queue Depth, Logical Drive
1846     Count, Maximum Blocks per Command, Controller Scatter/Gather Limit, and
1847     Driver Scatter/Gather Limit.  The Driver Queue Depth must be at most one
1848     less than the Controller Queue Depth to allow for an automatic drive
1849     rebuild operation.
1850   */
1851   Controller->ControllerQueueDepth = ControllerInfo->MaximumParallelCommands;
1852   Controller->DriverQueueDepth = Controller->ControllerQueueDepth - 1;
1853   if (Controller->DriverQueueDepth > DAC960_MaxDriverQueueDepth)
1854     Controller->DriverQueueDepth = DAC960_MaxDriverQueueDepth;
1855   Controller->LogicalDriveCount = ControllerInfo->LogicalDevicesPresent;
1856   Controller->MaxBlocksPerCommand =
1857     ControllerInfo->MaximumDataTransferSizeInBlocks;
1858   Controller->ControllerScatterGatherLimit =
1859     ControllerInfo->MaximumScatterGatherEntries;
1860   Controller->DriverScatterGatherLimit =
1861     Controller->ControllerScatterGatherLimit;
1862   if (Controller->DriverScatterGatherLimit > DAC960_V2_ScatterGatherLimit)
1863     Controller->DriverScatterGatherLimit = DAC960_V2_ScatterGatherLimit;
1864   /*
1865     Initialize the Logical Device Information.
1866   */
1867   while (true)
1868     {
1869       DAC960_V2_LogicalDeviceInfo_T *NewLogicalDeviceInfo =
1870         Controller->V2.NewLogicalDeviceInformation;
1871       DAC960_V2_LogicalDeviceInfo_T *LogicalDeviceInfo;
1872       DAC960_V2_PhysicalDevice_T PhysicalDevice;
1873
1874       if (!DAC960_V2_NewLogicalDeviceInfo(Controller, LogicalDeviceNumber))
1875         break;
1876       LogicalDeviceNumber = NewLogicalDeviceInfo->LogicalDeviceNumber;
1877       if (LogicalDeviceNumber >= DAC960_MaxLogicalDrives) {
1878         DAC960_Error("DAC960: Logical Drive Number %d not supported\n",
1879                        Controller, LogicalDeviceNumber);
1880                 break;
1881       }
1882       if (NewLogicalDeviceInfo->DeviceBlockSizeInBytes != DAC960_BlockSize) {
1883         DAC960_Error("DAC960: Logical Drive Block Size %d not supported\n",
1884               Controller, NewLogicalDeviceInfo->DeviceBlockSizeInBytes);
1885         LogicalDeviceNumber++;
1886         continue;
1887       }
1888       PhysicalDevice.Controller = 0;
1889       PhysicalDevice.Channel = NewLogicalDeviceInfo->Channel;
1890       PhysicalDevice.TargetID = NewLogicalDeviceInfo->TargetID;
1891       PhysicalDevice.LogicalUnit = NewLogicalDeviceInfo->LogicalUnit;
1892       Controller->V2.LogicalDriveToVirtualDevice[LogicalDeviceNumber] =
1893         PhysicalDevice;
1894       if (NewLogicalDeviceInfo->LogicalDeviceState !=
1895           DAC960_V2_LogicalDevice_Offline)
1896         Controller->LogicalDriveInitiallyAccessible[LogicalDeviceNumber] = true;
1897       LogicalDeviceInfo = kmalloc(sizeof(DAC960_V2_LogicalDeviceInfo_T),
1898                                    GFP_ATOMIC);
1899       if (LogicalDeviceInfo == NULL)
1900         return DAC960_Failure(Controller, "LOGICAL DEVICE ALLOCATION");
1901       Controller->V2.LogicalDeviceInformation[LogicalDeviceNumber] =
1902         LogicalDeviceInfo;
1903       memcpy(LogicalDeviceInfo, NewLogicalDeviceInfo,
1904              sizeof(DAC960_V2_LogicalDeviceInfo_T));
1905       LogicalDeviceNumber++;
1906     }
1907   return true;
1908 }
1909
1910
1911 /*
1912   DAC960_ReportControllerConfiguration reports the Configuration Information
1913   for Controller.
1914 */
1915
1916 static bool DAC960_ReportControllerConfiguration(DAC960_Controller_T
1917                                                     *Controller)
1918 {
1919   DAC960_Info("Configuring Mylex %s PCI RAID Controller\n",
1920               Controller, Controller->ModelName);
1921   DAC960_Info("  Firmware Version: %s, Channels: %d, Memory Size: %dMB\n",
1922               Controller, Controller->FirmwareVersion,
1923               Controller->Channels, Controller->MemorySize);
1924   DAC960_Info("  PCI Bus: %d, Device: %d, Function: %d, I/O Address: ",
1925               Controller, Controller->Bus,
1926               Controller->Device, Controller->Function);
1927   if (Controller->IO_Address == 0)
1928     DAC960_Info("Unassigned\n", Controller);
1929   else DAC960_Info("0x%X\n", Controller, Controller->IO_Address);
1930   DAC960_Info("  PCI Address: 0x%X mapped at 0x%lX, IRQ Channel: %d\n",
1931               Controller, Controller->PCI_Address,
1932               (unsigned long) Controller->BaseAddress,
1933               Controller->IRQ_Channel);
1934   DAC960_Info("  Controller Queue Depth: %d, "
1935               "Maximum Blocks per Command: %d\n",
1936               Controller, Controller->ControllerQueueDepth,
1937               Controller->MaxBlocksPerCommand);
1938   DAC960_Info("  Driver Queue Depth: %d, "
1939               "Scatter/Gather Limit: %d of %d Segments\n",
1940               Controller, Controller->DriverQueueDepth,
1941               Controller->DriverScatterGatherLimit,
1942               Controller->ControllerScatterGatherLimit);
1943   if (Controller->FirmwareType == DAC960_V1_Controller)
1944     {
1945       DAC960_Info("  Stripe Size: %dKB, Segment Size: %dKB, "
1946                   "BIOS Geometry: %d/%d\n", Controller,
1947                   Controller->V1.StripeSize,
1948                   Controller->V1.SegmentSize,
1949                   Controller->V1.GeometryTranslationHeads,
1950                   Controller->V1.GeometryTranslationSectors);
1951       if (Controller->V1.SAFTE_EnclosureManagementEnabled)
1952         DAC960_Info("  SAF-TE Enclosure Management Enabled\n", Controller);
1953     }
1954   return true;
1955 }
1956
1957
1958 /*
1959   DAC960_V1_ReadDeviceConfiguration reads the Device Configuration Information
1960   for DAC960 V1 Firmware Controllers by requesting the SCSI Inquiry and SCSI
1961   Inquiry Unit Serial Number information for each device connected to
1962   Controller.
1963 */
1964
1965 static bool DAC960_V1_ReadDeviceConfiguration(DAC960_Controller_T
1966                                                  *Controller)
1967 {
1968   struct dma_loaf local_dma;
1969
1970   dma_addr_t DCDBs_dma[DAC960_V1_MaxChannels];
1971   DAC960_V1_DCDB_T *DCDBs_cpu[DAC960_V1_MaxChannels];
1972
1973   dma_addr_t SCSI_Inquiry_dma[DAC960_V1_MaxChannels];
1974   DAC960_SCSI_Inquiry_T *SCSI_Inquiry_cpu[DAC960_V1_MaxChannels];
1975
1976   dma_addr_t SCSI_NewInquiryUnitSerialNumberDMA[DAC960_V1_MaxChannels];
1977   DAC960_SCSI_Inquiry_UnitSerialNumber_T *SCSI_NewInquiryUnitSerialNumberCPU[DAC960_V1_MaxChannels];
1978
1979   struct completion Completions[DAC960_V1_MaxChannels];
1980   unsigned long flags;
1981   int Channel, TargetID;
1982
1983   if (!init_dma_loaf(Controller->PCIDevice, &local_dma,
1984                 DAC960_V1_MaxChannels*(sizeof(DAC960_V1_DCDB_T) +
1985                         sizeof(DAC960_SCSI_Inquiry_T) +
1986                         sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T))))
1987      return DAC960_Failure(Controller,
1988                         "DMA ALLOCATION FAILED IN ReadDeviceConfiguration");
1989
1990   for (Channel = 0; Channel < Controller->Channels; Channel++) {
1991         DCDBs_cpu[Channel] = slice_dma_loaf(&local_dma,
1992                         sizeof(DAC960_V1_DCDB_T), DCDBs_dma + Channel);
1993         SCSI_Inquiry_cpu[Channel] = slice_dma_loaf(&local_dma,
1994                         sizeof(DAC960_SCSI_Inquiry_T),
1995                         SCSI_Inquiry_dma + Channel);
1996         SCSI_NewInquiryUnitSerialNumberCPU[Channel] = slice_dma_loaf(&local_dma,
1997                         sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T),
1998                         SCSI_NewInquiryUnitSerialNumberDMA + Channel);
1999   }
2000
2001   for (TargetID = 0; TargetID < Controller->Targets; TargetID++)
2002     {
2003       /*
2004        * For each channel, submit a probe for a device on that channel.
2005        * The timeout interval for a device that is present is 10 seconds.
2006        * With this approach, the timeout periods can elapse in parallel
2007        * on each channel.
2008        */
2009       for (Channel = 0; Channel < Controller->Channels; Channel++)
2010         {
2011           dma_addr_t NewInquiryStandardDataDMA = SCSI_Inquiry_dma[Channel];
2012           DAC960_V1_DCDB_T *DCDB = DCDBs_cpu[Channel];
2013           dma_addr_t DCDB_dma = DCDBs_dma[Channel];
2014           DAC960_Command_T *Command = Controller->Commands[Channel];
2015           struct completion *Completion = &Completions[Channel];
2016
2017           init_completion(Completion);
2018           DAC960_V1_ClearCommand(Command);
2019           Command->CommandType = DAC960_ImmediateCommand;
2020           Command->Completion = Completion;
2021           Command->V1.CommandMailbox.Type3.CommandOpcode = DAC960_V1_DCDB;
2022           Command->V1.CommandMailbox.Type3.BusAddress = DCDB_dma;
2023           DCDB->Channel = Channel;
2024           DCDB->TargetID = TargetID;
2025           DCDB->Direction = DAC960_V1_DCDB_DataTransferDeviceToSystem;
2026           DCDB->EarlyStatus = false;
2027           DCDB->Timeout = DAC960_V1_DCDB_Timeout_10_seconds;
2028           DCDB->NoAutomaticRequestSense = false;
2029           DCDB->DisconnectPermitted = true;
2030           DCDB->TransferLength = sizeof(DAC960_SCSI_Inquiry_T);
2031           DCDB->BusAddress = NewInquiryStandardDataDMA;
2032           DCDB->CDBLength = 6;
2033           DCDB->TransferLengthHigh4 = 0;
2034           DCDB->SenseLength = sizeof(DCDB->SenseData);
2035           DCDB->CDB[0] = 0x12; /* INQUIRY */
2036           DCDB->CDB[1] = 0; /* EVPD = 0 */
2037           DCDB->CDB[2] = 0; /* Page Code */
2038           DCDB->CDB[3] = 0; /* Reserved */
2039           DCDB->CDB[4] = sizeof(DAC960_SCSI_Inquiry_T);
2040           DCDB->CDB[5] = 0; /* Control */
2041
2042           spin_lock_irqsave(&Controller->queue_lock, flags);
2043           DAC960_QueueCommand(Command);
2044           spin_unlock_irqrestore(&Controller->queue_lock, flags);
2045         }
2046       /*
2047        * Wait for the problems submitted in the previous loop
2048        * to complete.  On the probes that are successful,
2049        * get the serial number of the device that was found.
2050        */
2051       for (Channel = 0; Channel < Controller->Channels; Channel++)
2052         {
2053           DAC960_SCSI_Inquiry_T *InquiryStandardData =
2054             &Controller->V1.InquiryStandardData[Channel][TargetID];
2055           DAC960_SCSI_Inquiry_T *NewInquiryStandardData = SCSI_Inquiry_cpu[Channel];
2056           dma_addr_t NewInquiryUnitSerialNumberDMA =
2057                         SCSI_NewInquiryUnitSerialNumberDMA[Channel];
2058           DAC960_SCSI_Inquiry_UnitSerialNumber_T *NewInquiryUnitSerialNumber =
2059                         SCSI_NewInquiryUnitSerialNumberCPU[Channel];
2060           DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
2061             &Controller->V1.InquiryUnitSerialNumber[Channel][TargetID];
2062           DAC960_Command_T *Command = Controller->Commands[Channel];
2063           DAC960_V1_DCDB_T *DCDB = DCDBs_cpu[Channel];
2064           struct completion *Completion = &Completions[Channel];
2065
2066           wait_for_completion(Completion);
2067
2068           if (Command->V1.CommandStatus != DAC960_V1_NormalCompletion) {
2069             memset(InquiryStandardData, 0, sizeof(DAC960_SCSI_Inquiry_T));
2070             InquiryStandardData->PeripheralDeviceType = 0x1F;
2071             continue;
2072           } else
2073             memcpy(InquiryStandardData, NewInquiryStandardData, sizeof(DAC960_SCSI_Inquiry_T));
2074
2075           /* Preserve Channel and TargetID values from the previous loop */
2076           Command->Completion = Completion;
2077           DCDB->TransferLength = sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T);
2078           DCDB->BusAddress = NewInquiryUnitSerialNumberDMA;
2079           DCDB->SenseLength = sizeof(DCDB->SenseData);
2080           DCDB->CDB[0] = 0x12; /* INQUIRY */
2081           DCDB->CDB[1] = 1; /* EVPD = 1 */
2082           DCDB->CDB[2] = 0x80; /* Page Code */
2083           DCDB->CDB[3] = 0; /* Reserved */
2084           DCDB->CDB[4] = sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T);
2085           DCDB->CDB[5] = 0; /* Control */
2086
2087           spin_lock_irqsave(&Controller->queue_lock, flags);
2088           DAC960_QueueCommand(Command);
2089           spin_unlock_irqrestore(&Controller->queue_lock, flags);
2090           wait_for_completion(Completion);
2091
2092           if (Command->V1.CommandStatus != DAC960_V1_NormalCompletion) {
2093                 memset(InquiryUnitSerialNumber, 0,
2094                         sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
2095                 InquiryUnitSerialNumber->PeripheralDeviceType = 0x1F;
2096           } else
2097                 memcpy(InquiryUnitSerialNumber, NewInquiryUnitSerialNumber,
2098                         sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
2099         }
2100     }
2101     free_dma_loaf(Controller->PCIDevice, &local_dma);
2102   return true;
2103 }
2104
2105
2106 /*
2107   DAC960_V2_ReadDeviceConfiguration reads the Device Configuration Information
2108   for DAC960 V2 Firmware Controllers by requesting the Physical Device
2109   Information and SCSI Inquiry Unit Serial Number information for each
2110   device connected to Controller.
2111 */
2112
2113 static bool DAC960_V2_ReadDeviceConfiguration(DAC960_Controller_T
2114                                                  *Controller)
2115 {
2116   unsigned char Channel = 0, TargetID = 0, LogicalUnit = 0;
2117   unsigned short PhysicalDeviceIndex = 0;
2118
2119   while (true)
2120     {
2121       DAC960_V2_PhysicalDeviceInfo_T *NewPhysicalDeviceInfo =
2122                 Controller->V2.NewPhysicalDeviceInformation;
2123       DAC960_V2_PhysicalDeviceInfo_T *PhysicalDeviceInfo;
2124       DAC960_SCSI_Inquiry_UnitSerialNumber_T *NewInquiryUnitSerialNumber =
2125                 Controller->V2.NewInquiryUnitSerialNumber;
2126       DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber;
2127
2128       if (!DAC960_V2_NewPhysicalDeviceInfo(Controller, Channel, TargetID, LogicalUnit))
2129           break;
2130
2131       PhysicalDeviceInfo = kmalloc(sizeof(DAC960_V2_PhysicalDeviceInfo_T),
2132                                     GFP_ATOMIC);
2133       if (PhysicalDeviceInfo == NULL)
2134                 return DAC960_Failure(Controller, "PHYSICAL DEVICE ALLOCATION");
2135       Controller->V2.PhysicalDeviceInformation[PhysicalDeviceIndex] =
2136                 PhysicalDeviceInfo;
2137       memcpy(PhysicalDeviceInfo, NewPhysicalDeviceInfo,
2138                 sizeof(DAC960_V2_PhysicalDeviceInfo_T));
2139
2140       InquiryUnitSerialNumber = kmalloc(
2141               sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T), GFP_ATOMIC);
2142       if (InquiryUnitSerialNumber == NULL) {
2143         kfree(PhysicalDeviceInfo);
2144         return DAC960_Failure(Controller, "SERIAL NUMBER ALLOCATION");
2145       }
2146       Controller->V2.InquiryUnitSerialNumber[PhysicalDeviceIndex] =
2147                 InquiryUnitSerialNumber;
2148
2149       Channel = NewPhysicalDeviceInfo->Channel;
2150       TargetID = NewPhysicalDeviceInfo->TargetID;
2151       LogicalUnit = NewPhysicalDeviceInfo->LogicalUnit;
2152
2153       /*
2154          Some devices do NOT have Unit Serial Numbers.
2155          This command fails for them.  But, we still want to
2156          remember those devices are there.  Construct a
2157          UnitSerialNumber structure for the failure case.
2158       */
2159       if (!DAC960_V2_NewInquiryUnitSerialNumber(Controller, Channel, TargetID, LogicalUnit)) {
2160         memset(InquiryUnitSerialNumber, 0,
2161              sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
2162         InquiryUnitSerialNumber->PeripheralDeviceType = 0x1F;
2163       } else
2164         memcpy(InquiryUnitSerialNumber, NewInquiryUnitSerialNumber,
2165                 sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
2166
2167       PhysicalDeviceIndex++;
2168       LogicalUnit++;
2169     }
2170   return true;
2171 }
2172
2173
2174 /*
2175   DAC960_SanitizeInquiryData sanitizes the Vendor, Model, Revision, and
2176   Product Serial Number fields of the Inquiry Standard Data and Inquiry
2177   Unit Serial Number structures.
2178 */
2179
2180 static void DAC960_SanitizeInquiryData(DAC960_SCSI_Inquiry_T
2181                                          *InquiryStandardData,
2182                                        DAC960_SCSI_Inquiry_UnitSerialNumber_T
2183                                          *InquiryUnitSerialNumber,
2184                                        unsigned char *Vendor,
2185                                        unsigned char *Model,
2186                                        unsigned char *Revision,
2187                                        unsigned char *SerialNumber)
2188 {
2189   int SerialNumberLength, i;
2190   if (InquiryStandardData->PeripheralDeviceType == 0x1F) return;
2191   for (i = 0; i < sizeof(InquiryStandardData->VendorIdentification); i++)
2192     {
2193       unsigned char VendorCharacter =
2194         InquiryStandardData->VendorIdentification[i];
2195       Vendor[i] = (VendorCharacter >= ' ' && VendorCharacter <= '~'
2196                    ? VendorCharacter : ' ');
2197     }
2198   Vendor[sizeof(InquiryStandardData->VendorIdentification)] = '\0';
2199   for (i = 0; i < sizeof(InquiryStandardData->ProductIdentification); i++)
2200     {
2201       unsigned char ModelCharacter =
2202         InquiryStandardData->ProductIdentification[i];
2203       Model[i] = (ModelCharacter >= ' ' && ModelCharacter <= '~'
2204                   ? ModelCharacter : ' ');
2205     }
2206   Model[sizeof(InquiryStandardData->ProductIdentification)] = '\0';
2207   for (i = 0; i < sizeof(InquiryStandardData->ProductRevisionLevel); i++)
2208     {
2209       unsigned char RevisionCharacter =
2210         InquiryStandardData->ProductRevisionLevel[i];
2211       Revision[i] = (RevisionCharacter >= ' ' && RevisionCharacter <= '~'
2212                      ? RevisionCharacter : ' ');
2213     }
2214   Revision[sizeof(InquiryStandardData->ProductRevisionLevel)] = '\0';
2215   if (InquiryUnitSerialNumber->PeripheralDeviceType == 0x1F) return;
2216   SerialNumberLength = InquiryUnitSerialNumber->PageLength;
2217   if (SerialNumberLength >
2218       sizeof(InquiryUnitSerialNumber->ProductSerialNumber))
2219     SerialNumberLength = sizeof(InquiryUnitSerialNumber->ProductSerialNumber);
2220   for (i = 0; i < SerialNumberLength; i++)
2221     {
2222       unsigned char SerialNumberCharacter =
2223         InquiryUnitSerialNumber->ProductSerialNumber[i];
2224       SerialNumber[i] =
2225         (SerialNumberCharacter >= ' ' && SerialNumberCharacter <= '~'
2226          ? SerialNumberCharacter : ' ');
2227     }
2228   SerialNumber[SerialNumberLength] = '\0';
2229 }
2230
2231
2232 /*
2233   DAC960_V1_ReportDeviceConfiguration reports the Device Configuration
2234   Information for DAC960 V1 Firmware Controllers.
2235 */
2236
2237 static bool DAC960_V1_ReportDeviceConfiguration(DAC960_Controller_T
2238                                                    *Controller)
2239 {
2240   int LogicalDriveNumber, Channel, TargetID;
2241   DAC960_Info("  Physical Devices:\n", Controller);
2242   for (Channel = 0; Channel < Controller->Channels; Channel++)
2243     for (TargetID = 0; TargetID < Controller->Targets; TargetID++)
2244       {
2245         DAC960_SCSI_Inquiry_T *InquiryStandardData =
2246           &Controller->V1.InquiryStandardData[Channel][TargetID];
2247         DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
2248           &Controller->V1.InquiryUnitSerialNumber[Channel][TargetID];
2249         DAC960_V1_DeviceState_T *DeviceState =
2250           &Controller->V1.DeviceState[Channel][TargetID];
2251         DAC960_V1_ErrorTableEntry_T *ErrorEntry =
2252           &Controller->V1.ErrorTable.ErrorTableEntries[Channel][TargetID];
2253         char Vendor[1+sizeof(InquiryStandardData->VendorIdentification)];
2254         char Model[1+sizeof(InquiryStandardData->ProductIdentification)];
2255         char Revision[1+sizeof(InquiryStandardData->ProductRevisionLevel)];
2256         char SerialNumber[1+sizeof(InquiryUnitSerialNumber
2257                                    ->ProductSerialNumber)];
2258         if (InquiryStandardData->PeripheralDeviceType == 0x1F) continue;
2259         DAC960_SanitizeInquiryData(InquiryStandardData, InquiryUnitSerialNumber,
2260                                    Vendor, Model, Revision, SerialNumber);
2261         DAC960_Info("    %d:%d%s Vendor: %s  Model: %s  Revision: %s\n",
2262                     Controller, Channel, TargetID, (TargetID < 10 ? " " : ""),
2263                     Vendor, Model, Revision);
2264         if (InquiryUnitSerialNumber->PeripheralDeviceType != 0x1F)
2265           DAC960_Info("         Serial Number: %s\n", Controller, SerialNumber);
2266         if (DeviceState->Present &&
2267             DeviceState->DeviceType == DAC960_V1_DiskType)
2268           {
2269             if (Controller->V1.DeviceResetCount[Channel][TargetID] > 0)
2270               DAC960_Info("         Disk Status: %s, %u blocks, %d resets\n",
2271                           Controller,
2272                           (DeviceState->DeviceState == DAC960_V1_Device_Dead
2273                            ? "Dead"
2274                            : DeviceState->DeviceState
2275                              == DAC960_V1_Device_WriteOnly
2276                              ? "Write-Only"
2277                              : DeviceState->DeviceState
2278                                == DAC960_V1_Device_Online
2279                                ? "Online" : "Standby"),
2280                           DeviceState->DiskSize,
2281                           Controller->V1.DeviceResetCount[Channel][TargetID]);
2282             else
2283               DAC960_Info("         Disk Status: %s, %u blocks\n", Controller,
2284                           (DeviceState->DeviceState == DAC960_V1_Device_Dead
2285                            ? "Dead"
2286                            : DeviceState->DeviceState
2287                              == DAC960_V1_Device_WriteOnly
2288                              ? "Write-Only"
2289                              : DeviceState->DeviceState
2290                                == DAC960_V1_Device_Online
2291                                ? "Online" : "Standby"),
2292                           DeviceState->DiskSize);
2293           }
2294         if (ErrorEntry->ParityErrorCount > 0 ||
2295             ErrorEntry->SoftErrorCount > 0 ||
2296             ErrorEntry->HardErrorCount > 0 ||
2297             ErrorEntry->MiscErrorCount > 0)
2298           DAC960_Info("         Errors - Parity: %d, Soft: %d, "
2299                       "Hard: %d, Misc: %d\n", Controller,
2300                       ErrorEntry->ParityErrorCount,
2301                       ErrorEntry->SoftErrorCount,
2302                       ErrorEntry->HardErrorCount,
2303                       ErrorEntry->MiscErrorCount);
2304       }
2305   DAC960_Info("  Logical Drives:\n", Controller);
2306   for (LogicalDriveNumber = 0;
2307        LogicalDriveNumber < Controller->LogicalDriveCount;
2308        LogicalDriveNumber++)
2309     {
2310       DAC960_V1_LogicalDriveInformation_T *LogicalDriveInformation =
2311         &Controller->V1.LogicalDriveInformation[LogicalDriveNumber];
2312       DAC960_Info("    /dev/rd/c%dd%d: RAID-%d, %s, %u blocks, %s\n",
2313                   Controller, Controller->ControllerNumber, LogicalDriveNumber,
2314                   LogicalDriveInformation->RAIDLevel,
2315                   (LogicalDriveInformation->LogicalDriveState
2316                    == DAC960_V1_LogicalDrive_Online
2317                    ? "Online"
2318                    : LogicalDriveInformation->LogicalDriveState
2319                      == DAC960_V1_LogicalDrive_Critical
2320                      ? "Critical" : "Offline"),
2321                   LogicalDriveInformation->LogicalDriveSize,
2322                   (LogicalDriveInformation->WriteBack
2323                    ? "Write Back" : "Write Thru"));
2324     }
2325   return true;
2326 }
2327
2328
2329 /*
2330   DAC960_V2_ReportDeviceConfiguration reports the Device Configuration
2331   Information for DAC960 V2 Firmware Controllers.
2332 */
2333
2334 static bool DAC960_V2_ReportDeviceConfiguration(DAC960_Controller_T
2335                                                    *Controller)
2336 {
2337   int PhysicalDeviceIndex, LogicalDriveNumber;
2338   DAC960_Info("  Physical Devices:\n", Controller);
2339   for (PhysicalDeviceIndex = 0;
2340        PhysicalDeviceIndex < DAC960_V2_MaxPhysicalDevices;
2341        PhysicalDeviceIndex++)
2342     {
2343       DAC960_V2_PhysicalDeviceInfo_T *PhysicalDeviceInfo =
2344         Controller->V2.PhysicalDeviceInformation[PhysicalDeviceIndex];
2345       DAC960_SCSI_Inquiry_T *InquiryStandardData =
2346         (DAC960_SCSI_Inquiry_T *) &PhysicalDeviceInfo->SCSI_InquiryData;
2347       DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
2348         Controller->V2.InquiryUnitSerialNumber[PhysicalDeviceIndex];
2349       char Vendor[1+sizeof(InquiryStandardData->VendorIdentification)];
2350       char Model[1+sizeof(InquiryStandardData->ProductIdentification)];
2351       char Revision[1+sizeof(InquiryStandardData->ProductRevisionLevel)];
2352       char SerialNumber[1+sizeof(InquiryUnitSerialNumber->ProductSerialNumber)];
2353       if (PhysicalDeviceInfo == NULL) break;
2354       DAC960_SanitizeInquiryData(InquiryStandardData, InquiryUnitSerialNumber,
2355                                  Vendor, Model, Revision, SerialNumber);
2356       DAC960_Info("    %d:%d%s Vendor: %s  Model: %s  Revision: %s\n",
2357                   Controller,
2358                   PhysicalDeviceInfo->Channel,
2359                   PhysicalDeviceInfo->TargetID,
2360                   (PhysicalDeviceInfo->TargetID < 10 ? " " : ""),
2361                   Vendor, Model, Revision);
2362       if (PhysicalDeviceInfo->NegotiatedSynchronousMegaTransfers == 0)
2363         DAC960_Info("         %sAsynchronous\n", Controller,
2364                     (PhysicalDeviceInfo->NegotiatedDataWidthBits == 16
2365                      ? "Wide " :""));
2366       else
2367         DAC960_Info("         %sSynchronous at %d MB/sec\n", Controller,
2368                     (PhysicalDeviceInfo->NegotiatedDataWidthBits == 16
2369                      ? "Wide " :""),
2370                     (PhysicalDeviceInfo->NegotiatedSynchronousMegaTransfers
2371                      * PhysicalDeviceInfo->NegotiatedDataWidthBits/8));
2372       if (InquiryUnitSerialNumber->PeripheralDeviceType != 0x1F)
2373         DAC960_Info("         Serial Number: %s\n", Controller, SerialNumber);
2374       if (PhysicalDeviceInfo->PhysicalDeviceState ==
2375           DAC960_V2_Device_Unconfigured)
2376         continue;
2377       DAC960_Info("         Disk Status: %s, %u blocks\n", Controller,
2378                   (PhysicalDeviceInfo->PhysicalDeviceState
2379                    == DAC960_V2_Device_Online
2380                    ? "Online"
2381                    : PhysicalDeviceInfo->PhysicalDeviceState
2382                      == DAC960_V2_Device_Rebuild
2383                      ? "Rebuild"
2384                      : PhysicalDeviceInfo->PhysicalDeviceState
2385                        == DAC960_V2_Device_Missing
2386                        ? "Missing"
2387                        : PhysicalDeviceInfo->PhysicalDeviceState
2388                          == DAC960_V2_Device_Critical
2389                          ? "Critical"
2390                          : PhysicalDeviceInfo->PhysicalDeviceState
2391                            == DAC960_V2_Device_Dead
2392                            ? "Dead"
2393                            : PhysicalDeviceInfo->PhysicalDeviceState
2394                              == DAC960_V2_Device_SuspectedDead
2395                              ? "Suspected-Dead"
2396                              : PhysicalDeviceInfo->PhysicalDeviceState
2397                                == DAC960_V2_Device_CommandedOffline
2398                                ? "Commanded-Offline"
2399                                : PhysicalDeviceInfo->PhysicalDeviceState
2400                                  == DAC960_V2_Device_Standby
2401                                  ? "Standby" : "Unknown"),
2402                   PhysicalDeviceInfo->ConfigurableDeviceSize);
2403       if (PhysicalDeviceInfo->ParityErrors == 0 &&
2404           PhysicalDeviceInfo->SoftErrors == 0 &&
2405           PhysicalDeviceInfo->HardErrors == 0 &&
2406           PhysicalDeviceInfo->MiscellaneousErrors == 0 &&
2407           PhysicalDeviceInfo->CommandTimeouts == 0 &&
2408           PhysicalDeviceInfo->Retries == 0 &&
2409           PhysicalDeviceInfo->Aborts == 0 &&
2410           PhysicalDeviceInfo->PredictedFailuresDetected == 0)
2411         continue;
2412       DAC960_Info("         Errors - Parity: %d, Soft: %d, "
2413                   "Hard: %d, Misc: %d\n", Controller,
2414                   PhysicalDeviceInfo->ParityErrors,
2415                   PhysicalDeviceInfo->SoftErrors,
2416                   PhysicalDeviceInfo->HardErrors,
2417                   PhysicalDeviceInfo->MiscellaneousErrors);
2418       DAC960_Info("                  Timeouts: %d, Retries: %d, "
2419                   "Aborts: %d, Predicted: %d\n", Controller,
2420                   PhysicalDeviceInfo->CommandTimeouts,
2421                   PhysicalDeviceInfo->Retries,
2422                   PhysicalDeviceInfo->Aborts,
2423                   PhysicalDeviceInfo->PredictedFailuresDetected);
2424     }
2425   DAC960_Info("  Logical Drives:\n", Controller);
2426   for (LogicalDriveNumber = 0;
2427        LogicalDriveNumber < DAC960_MaxLogicalDrives;
2428        LogicalDriveNumber++)
2429     {
2430       DAC960_V2_LogicalDeviceInfo_T *LogicalDeviceInfo =
2431         Controller->V2.LogicalDeviceInformation[LogicalDriveNumber];
2432       unsigned char *ReadCacheStatus[] = { "Read Cache Disabled",
2433                                            "Read Cache Enabled",
2434                                            "Read Ahead Enabled",
2435                                            "Intelligent Read Ahead Enabled",
2436                                            "-", "-", "-", "-" };
2437       unsigned char *WriteCacheStatus[] = { "Write Cache Disabled",
2438                                             "Logical Device Read Only",
2439                                             "Write Cache Enabled",
2440                                             "Intelligent Write Cache Enabled",
2441                                             "-", "-", "-", "-" };
2442       unsigned char *GeometryTranslation;
2443       if (LogicalDeviceInfo == NULL) continue;
2444       switch (LogicalDeviceInfo->DriveGeometry)
2445         {
2446         case DAC960_V2_Geometry_128_32:
2447           GeometryTranslation = "128/32";
2448           break;
2449         case DAC960_V2_Geometry_255_63:
2450           GeometryTranslation = "255/63";
2451           break;
2452         default:
2453           GeometryTranslation = "Invalid";
2454           DAC960_Error("Illegal Logical Device Geometry %d\n",
2455                        Controller, LogicalDeviceInfo->DriveGeometry);
2456           break;
2457         }
2458       DAC960_Info("    /dev/rd/c%dd%d: RAID-%d, %s, %u blocks\n",
2459                   Controller, Controller->ControllerNumber, LogicalDriveNumber,
2460                   LogicalDeviceInfo->RAIDLevel,
2461                   (LogicalDeviceInfo->LogicalDeviceState
2462                    == DAC960_V2_LogicalDevice_Online
2463                    ? "Online"
2464                    : LogicalDeviceInfo->LogicalDeviceState
2465                      == DAC960_V2_LogicalDevice_Critical
2466                      ? "Critical" : "Offline"),
2467                   LogicalDeviceInfo->ConfigurableDeviceSize);
2468       DAC960_Info("                  Logical Device %s, BIOS Geometry: %s\n",
2469                   Controller,
2470                   (LogicalDeviceInfo->LogicalDeviceControl
2471                                      .LogicalDeviceInitialized
2472                    ? "Initialized" : "Uninitialized"),
2473                   GeometryTranslation);
2474       if (LogicalDeviceInfo->StripeSize == 0)
2475         {
2476           if (LogicalDeviceInfo->CacheLineSize == 0)
2477             DAC960_Info("                  Stripe Size: N/A, "
2478                         "Segment Size: N/A\n", Controller);
2479           else
2480             DAC960_Info("                  Stripe Size: N/A, "
2481                         "Segment Size: %dKB\n", Controller,
2482                         1 << (LogicalDeviceInfo->CacheLineSize - 2));
2483         }
2484       else
2485         {
2486           if (LogicalDeviceInfo->CacheLineSize == 0)
2487             DAC960_Info("                  Stripe Size: %dKB, "
2488                         "Segment Size: N/A\n", Controller,
2489                         1 << (LogicalDeviceInfo->StripeSize - 2));
2490           else
2491             DAC960_Info("                  Stripe Size: %dKB, "
2492                         "Segment Size: %dKB\n", Controller,
2493                         1 << (LogicalDeviceInfo->StripeSize - 2),
2494                         1 << (LogicalDeviceInfo->CacheLineSize - 2));
2495         }
2496       DAC960_Info("                  %s, %s\n", Controller,
2497                   ReadCacheStatus[
2498                     LogicalDeviceInfo->LogicalDeviceControl.ReadCache],
2499                   WriteCacheStatus[
2500                     LogicalDeviceInfo->LogicalDeviceControl.WriteCache]);
2501       if (LogicalDeviceInfo->SoftErrors > 0 ||
2502           LogicalDeviceInfo->CommandsFailed > 0 ||
2503           LogicalDeviceInfo->DeferredWriteErrors)
2504         DAC960_Info("                  Errors - Soft: %d, Failed: %d, "
2505                     "Deferred Write: %d\n", Controller,
2506                     LogicalDeviceInfo->SoftErrors,
2507                     LogicalDeviceInfo->CommandsFailed,
2508                     LogicalDeviceInfo->DeferredWriteErrors);
2509
2510     }
2511   return true;
2512 }
2513
2514 /*
2515   DAC960_RegisterBlockDevice registers the Block Device structures
2516   associated with Controller.
2517 */
2518
2519 static bool DAC960_RegisterBlockDevice(DAC960_Controller_T *Controller)
2520 {
2521   int MajorNumber = DAC960_MAJOR + Controller->ControllerNumber;
2522   int n;
2523
2524   /*
2525     Register the Block Device Major Number for this DAC960 Controller.
2526   */
2527   if (register_blkdev(MajorNumber, "dac960") < 0)
2528       return false;
2529
2530   for (n = 0; n < DAC960_MaxLogicalDrives; n++) {
2531         struct gendisk *disk = Controller->disks[n];
2532         struct request_queue *RequestQueue;
2533
2534         /* for now, let all request queues share controller's lock */
2535         RequestQueue = blk_init_queue(DAC960_RequestFunction,&Controller->queue_lock);
2536         if (!RequestQueue) {
2537                 printk("DAC960: failure to allocate request queue\n");
2538                 continue;
2539         }
2540         Controller->RequestQueue[n] = RequestQueue;
2541         blk_queue_bounce_limit(RequestQueue, Controller->BounceBufferLimit);
2542         RequestQueue->queuedata = Controller;
2543         blk_queue_max_segments(RequestQueue, Controller->DriverScatterGatherLimit);
2544         blk_queue_max_hw_sectors(RequestQueue, Controller->MaxBlocksPerCommand);
2545         disk->queue = RequestQueue;
2546         sprintf(disk->disk_name, "rd/c%dd%d", Controller->ControllerNumber, n);
2547         disk->major = MajorNumber;
2548         disk->first_minor = n << DAC960_MaxPartitionsBits;
2549         disk->fops = &DAC960_BlockDeviceOperations;
2550    }
2551   /*
2552     Indicate the Block Device Registration completed successfully,
2553   */
2554   return true;
2555 }
2556
2557
2558 /*
2559   DAC960_UnregisterBlockDevice unregisters the Block Device structures
2560   associated with Controller.
2561 */
2562
2563 static void DAC960_UnregisterBlockDevice(DAC960_Controller_T *Controller)
2564 {
2565   int MajorNumber = DAC960_MAJOR + Controller->ControllerNumber;
2566   int disk;
2567
2568   /* does order matter when deleting gendisk and cleanup in request queue? */
2569   for (disk = 0; disk < DAC960_MaxLogicalDrives; disk++) {
2570         del_gendisk(Controller->disks[disk]);
2571         blk_cleanup_queue(Controller->RequestQueue[disk]);
2572         Controller->RequestQueue[disk] = NULL;
2573   }
2574
2575   /*
2576     Unregister the Block Device Major Number for this DAC960 Controller.
2577   */
2578   unregister_blkdev(MajorNumber, "dac960");
2579 }
2580
2581 /*
2582   DAC960_ComputeGenericDiskInfo computes the values for the Generic Disk
2583   Information Partition Sector Counts and Block Sizes.
2584 */
2585
2586 static void DAC960_ComputeGenericDiskInfo(DAC960_Controller_T *Controller)
2587 {
2588         int disk;
2589         for (disk = 0; disk < DAC960_MaxLogicalDrives; disk++)
2590                 set_capacity(Controller->disks[disk], disk_size(Controller, disk));
2591 }
2592
2593 /*
2594   DAC960_ReportErrorStatus reports Controller BIOS Messages passed through
2595   the Error Status Register when the driver performs the BIOS handshaking.
2596   It returns true for fatal errors and false otherwise.
2597 */
2598
2599 static bool DAC960_ReportErrorStatus(DAC960_Controller_T *Controller,
2600                                         unsigned char ErrorStatus,
2601                                         unsigned char Parameter0,
2602                                         unsigned char Parameter1)
2603 {
2604   switch (ErrorStatus)
2605     {
2606     case 0x00:
2607       DAC960_Notice("Physical Device %d:%d Not Responding\n",
2608                     Controller, Parameter1, Parameter0);
2609       break;
2610     case 0x08:
2611       if (Controller->DriveSpinUpMessageDisplayed) break;
2612       DAC960_Notice("Spinning Up Drives\n", Controller);
2613       Controller->DriveSpinUpMessageDisplayed = true;
2614       break;
2615     case 0x30:
2616       DAC960_Notice("Configuration Checksum Error\n", Controller);
2617       break;
2618     case 0x60:
2619       DAC960_Notice("Mirror Race Recovery Failed\n", Controller);
2620       break;
2621     case 0x70:
2622       DAC960_Notice("Mirror Race Recovery In Progress\n", Controller);
2623       break;
2624     case 0x90:
2625       DAC960_Notice("Physical Device %d:%d COD Mismatch\n",
2626                     Controller, Parameter1, Parameter0);
2627       break;
2628     case 0xA0:
2629       DAC960_Notice("Logical Drive Installation Aborted\n", Controller);
2630       break;
2631     case 0xB0:
2632       DAC960_Notice("Mirror Race On A Critical Logical Drive\n", Controller);
2633       break;
2634     case 0xD0:
2635       DAC960_Notice("New Controller Configuration Found\n", Controller);
2636       break;
2637     case 0xF0:
2638       DAC960_Error("Fatal Memory Parity Error for Controller at\n", Controller);
2639       return true;
2640     default:
2641       DAC960_Error("Unknown Initialization Error %02X for Controller at\n",
2642                    Controller, ErrorStatus);
2643       return true;
2644     }
2645   return false;
2646 }
2647
2648
2649 /*
2650  * DAC960_DetectCleanup releases the resources that were allocated
2651  * during DAC960_DetectController().  DAC960_DetectController can
2652  * has several internal failure points, so not ALL resources may
2653  * have been allocated.  It's important to free only
2654  * resources that HAVE been allocated.  The code below always
2655  * tests that the resource has been allocated before attempting to
2656  * free it.
2657  */
2658 static void DAC960_DetectCleanup(DAC960_Controller_T *Controller)
2659 {
2660   int i;
2661
2662   /* Free the memory mailbox, status, and related structures */
2663   free_dma_loaf(Controller->PCIDevice, &Controller->DmaPages);
2664   if (Controller->MemoryMappedAddress) {
2665         switch(Controller->HardwareType)
2666         {
2667                 case DAC960_GEM_Controller:
2668                         DAC960_GEM_DisableInterrupts(Controller->BaseAddress);
2669                         break;
2670                 case DAC960_BA_Controller:
2671                         DAC960_BA_DisableInterrupts(Controller->BaseAddress);
2672                         break;
2673                 case DAC960_LP_Controller:
2674                         DAC960_LP_DisableInterrupts(Controller->BaseAddress);
2675                         break;
2676                 case DAC960_LA_Controller:
2677                         DAC960_LA_DisableInterrupts(Controller->BaseAddress);
2678                         break;
2679                 case DAC960_PG_Controller:
2680                         DAC960_PG_DisableInterrupts(Controller->BaseAddress);
2681                         break;
2682                 case DAC960_PD_Controller:
2683                         DAC960_PD_DisableInterrupts(Controller->BaseAddress);
2684                         break;
2685                 case DAC960_P_Controller:
2686                         DAC960_PD_DisableInterrupts(Controller->BaseAddress);
2687                         break;
2688         }
2689         iounmap(Controller->MemoryMappedAddress);
2690   }
2691   if (Controller->IRQ_Channel)
2692         free_irq(Controller->IRQ_Channel, Controller);
2693   if (Controller->IO_Address)
2694         release_region(Controller->IO_Address, 0x80);
2695   pci_disable_device(Controller->PCIDevice);
2696   for (i = 0; (i < DAC960_MaxLogicalDrives) && Controller->disks[i]; i++)
2697        put_disk(Controller->disks[i]);
2698   DAC960_Controllers[Controller->ControllerNumber] = NULL;
2699   kfree(Controller);
2700 }
2701
2702
2703 /*
2704   DAC960_DetectController detects Mylex DAC960/AcceleRAID/eXtremeRAID
2705   PCI RAID Controllers by interrogating the PCI Configuration Space for
2706   Controller Type.
2707 */
2708
2709 static DAC960_Controller_T *
2710 DAC960_DetectController(struct pci_dev *PCI_Device,
2711                         const struct pci_device_id *entry)
2712 {
2713   struct DAC960_privdata *privdata =
2714                 (struct DAC960_privdata *)entry->driver_data;
2715   irq_handler_t InterruptHandler = privdata->InterruptHandler;
2716   unsigned int MemoryWindowSize = privdata->MemoryWindowSize;
2717   DAC960_Controller_T *Controller = NULL;
2718   unsigned char DeviceFunction = PCI_Device->devfn;
2719   unsigned char ErrorStatus, Parameter0, Parameter1;
2720   unsigned int IRQ_Channel;
2721   void __iomem *BaseAddress;
2722   int i;
2723
2724   Controller = kzalloc(sizeof(DAC960_Controller_T), GFP_ATOMIC);
2725   if (Controller == NULL) {
2726         DAC960_Error("Unable to allocate Controller structure for "
2727                        "Controller at\n", NULL);
2728         return NULL;
2729   }
2730   Controller->ControllerNumber = DAC960_ControllerCount;
2731   DAC960_Controllers[DAC960_ControllerCount++] = Controller;
2732   Controller->Bus = PCI_Device->bus->number;
2733   Controller->FirmwareType = privdata->FirmwareType;
2734   Controller->HardwareType = privdata->HardwareType;
2735   Controller->Device = DeviceFunction >> 3;
2736   Controller->Function = DeviceFunction & 0x7;
2737   Controller->PCIDevice = PCI_Device;
2738   strcpy(Controller->FullModelName, "DAC960");
2739
2740   if (pci_enable_device(PCI_Device))
2741         goto Failure;
2742
2743   switch (Controller->HardwareType)
2744   {
2745         case DAC960_GEM_Controller:
2746           Controller->PCI_Address = pci_resource_start(PCI_Device, 0);
2747           break;
2748         case DAC960_BA_Controller:
2749           Controller->PCI_Address = pci_resource_start(PCI_Device, 0);
2750           break;
2751         case DAC960_LP_Controller:
2752           Controller->PCI_Address = pci_resource_start(PCI_Device, 0);
2753           break;
2754         case DAC960_LA_Controller:
2755           Controller->PCI_Address = pci_resource_start(PCI_Device, 0);
2756           break;
2757         case DAC960_PG_Controller:
2758           Controller->PCI_Address = pci_resource_start(PCI_Device, 0);
2759           break;
2760         case DAC960_PD_Controller:
2761           Controller->IO_Address = pci_resource_start(PCI_Device, 0);
2762           Controller->PCI_Address = pci_resource_start(PCI_Device, 1);
2763           break;
2764         case DAC960_P_Controller:
2765           Controller->IO_Address = pci_resource_start(PCI_Device, 0);
2766           Controller->PCI_Address = pci_resource_start(PCI_Device, 1);
2767           break;
2768   }
2769
2770   pci_set_drvdata(PCI_Device, (void *)((long)Controller->ControllerNumber));
2771   for (i = 0; i < DAC960_MaxLogicalDrives; i++) {
2772         Controller->disks[i] = alloc_disk(1<<DAC960_MaxPartitionsBits);
2773         if (!Controller->disks[i])
2774                 goto Failure;
2775         Controller->disks[i]->private_data = (void *)((long)i);
2776   }
2777   init_waitqueue_head(&Controller->CommandWaitQueue);
2778   init_waitqueue_head(&Controller->HealthStatusWaitQueue);
2779   spin_lock_init(&Controller->queue_lock);
2780   DAC960_AnnounceDriver(Controller);
2781   /*
2782     Map the Controller Register Window.
2783   */
2784  if (MemoryWindowSize < PAGE_SIZE)
2785         MemoryWindowSize = PAGE_SIZE;
2786   Controller->MemoryMappedAddress =
2787         ioremap_nocache(Controller->PCI_Address & PAGE_MASK, MemoryWindowSize);
2788   Controller->BaseAddress =
2789         Controller->MemoryMappedAddress + (Controller->PCI_Address & ~PAGE_MASK);
2790   if (Controller->MemoryMappedAddress == NULL)
2791   {
2792           DAC960_Error("Unable to map Controller Register Window for "
2793                        "Controller at\n", Controller);
2794           goto Failure;
2795   }
2796   BaseAddress = Controller->BaseAddress;
2797   switch (Controller->HardwareType)
2798   {
2799         case DAC960_GEM_Controller:
2800           DAC960_GEM_DisableInterrupts(BaseAddress);
2801           DAC960_GEM_AcknowledgeHardwareMailboxStatus(BaseAddress);
2802           udelay(1000);
2803           while (DAC960_GEM_InitializationInProgressP(BaseAddress))
2804             {
2805               if (DAC960_GEM_ReadErrorStatus(BaseAddress, &ErrorStatus,
2806                                             &Parameter0, &Parameter1) &&
2807                   DAC960_ReportErrorStatus(Controller, ErrorStatus,
2808                                            Parameter0, Parameter1))
2809                 goto Failure;
2810               udelay(10);
2811             }
2812           if (!DAC960_V2_EnableMemoryMailboxInterface(Controller))
2813             {
2814               DAC960_Error("Unable to Enable Memory Mailbox Interface "
2815                            "for Controller at\n", Controller);
2816               goto Failure;
2817             }
2818           DAC960_GEM_EnableInterrupts(BaseAddress);
2819           Controller->QueueCommand = DAC960_GEM_QueueCommand;
2820           Controller->ReadControllerConfiguration =
2821             DAC960_V2_ReadControllerConfiguration;
2822           Controller->ReadDeviceConfiguration =
2823             DAC960_V2_ReadDeviceConfiguration;
2824           Controller->ReportDeviceConfiguration =
2825             DAC960_V2_ReportDeviceConfiguration;
2826           Controller->QueueReadWriteCommand =
2827             DAC960_V2_QueueReadWriteCommand;
2828           break;
2829         case DAC960_BA_Controller:
2830           DAC960_BA_DisableInterrupts(BaseAddress);
2831           DAC960_BA_AcknowledgeHardwareMailboxStatus(BaseAddress);
2832           udelay(1000);
2833           while (DAC960_BA_InitializationInProgressP(BaseAddress))
2834             {
2835               if (DAC960_BA_ReadErrorStatus(BaseAddress, &ErrorStatus,
2836                                             &Parameter0, &Parameter1) &&
2837                   DAC960_ReportErrorStatus(Controller, ErrorStatus,
2838                                            Parameter0, Parameter1))
2839                 goto Failure;
2840               udelay(10);
2841             }
2842           if (!DAC960_V2_EnableMemoryMailboxInterface(Controller))
2843             {
2844               DAC960_Error("Unable to Enable Memory Mailbox Interface "
2845                            "for Controller at\n", Controller);
2846               goto Failure;
2847             }
2848           DAC960_BA_EnableInterrupts(BaseAddress);
2849           Controller->QueueCommand = DAC960_BA_QueueCommand;
2850           Controller->ReadControllerConfiguration =
2851             DAC960_V2_ReadControllerConfiguration;
2852           Controller->ReadDeviceConfiguration =
2853             DAC960_V2_ReadDeviceConfiguration;
2854           Controller->ReportDeviceConfiguration =
2855             DAC960_V2_ReportDeviceConfiguration;
2856           Controller->QueueReadWriteCommand =
2857             DAC960_V2_QueueReadWriteCommand;
2858           break;
2859         case DAC960_LP_Controller:
2860           DAC960_LP_DisableInterrupts(BaseAddress);
2861           DAC960_LP_AcknowledgeHardwareMailboxStatus(BaseAddress);
2862           udelay(1000);
2863           while (DAC960_LP_InitializationInProgressP(BaseAddress))
2864             {
2865               if (DAC960_LP_ReadErrorStatus(BaseAddress, &ErrorStatus,
2866                                             &Parameter0, &Parameter1) &&
2867                   DAC960_ReportErrorStatus(Controller, ErrorStatus,
2868                                            Parameter0, Parameter1))
2869                 goto Failure;
2870               udelay(10);
2871             }
2872           if (!DAC960_V2_EnableMemoryMailboxInterface(Controller))
2873             {
2874               DAC960_Error("Unable to Enable Memory Mailbox Interface "
2875                            "for Controller at\n", Controller);
2876               goto Failure;
2877             }
2878           DAC960_LP_EnableInterrupts(BaseAddress);
2879           Controller->QueueCommand = DAC960_LP_QueueCommand;
2880           Controller->ReadControllerConfiguration =
2881             DAC960_V2_ReadControllerConfiguration;
2882           Controller->ReadDeviceConfiguration =
2883             DAC960_V2_ReadDeviceConfiguration;
2884           Controller->ReportDeviceConfiguration =
2885             DAC960_V2_ReportDeviceConfiguration;
2886           Controller->QueueReadWriteCommand =
2887             DAC960_V2_QueueReadWriteCommand;
2888           break;
2889         case DAC960_LA_Controller:
2890           DAC960_LA_DisableInterrupts(BaseAddress);
2891           DAC960_LA_AcknowledgeHardwareMailboxStatus(BaseAddress);
2892           udelay(1000);
2893           while (DAC960_LA_InitializationInProgressP(BaseAddress))
2894             {
2895               if (DAC960_LA_ReadErrorStatus(BaseAddress, &ErrorStatus,
2896                                             &Parameter0, &Parameter1) &&
2897                   DAC960_ReportErrorStatus(Controller, ErrorStatus,
2898                                            Parameter0, Parameter1))
2899                 goto Failure;
2900               udelay(10);
2901             }
2902           if (!DAC960_V1_EnableMemoryMailboxInterface(Controller))
2903             {
2904               DAC960_Error("Unable to Enable Memory Mailbox Interface "
2905                            "for Controller at\n", Controller);
2906               goto Failure;
2907             }
2908           DAC960_LA_EnableInterrupts(BaseAddress);
2909           if (Controller->V1.DualModeMemoryMailboxInterface)
2910             Controller->QueueCommand = DAC960_LA_QueueCommandDualMode;
2911           else Controller->QueueCommand = DAC960_LA_QueueCommandSingleMode;
2912           Controller->ReadControllerConfiguration =
2913             DAC960_V1_ReadControllerConfiguration;
2914           Controller->ReadDeviceConfiguration =
2915             DAC960_V1_ReadDeviceConfiguration;
2916           Controller->ReportDeviceConfiguration =
2917             DAC960_V1_ReportDeviceConfiguration;
2918           Controller->QueueReadWriteCommand =
2919             DAC960_V1_QueueReadWriteCommand;
2920           break;
2921         case DAC960_PG_Controller:
2922           DAC960_PG_DisableInterrupts(BaseAddress);
2923           DAC960_PG_AcknowledgeHardwareMailboxStatus(BaseAddress);
2924           udelay(1000);
2925           while (DAC960_PG_InitializationInProgressP(BaseAddress))
2926             {
2927               if (DAC960_PG_ReadErrorStatus(BaseAddress, &ErrorStatus,
2928                                             &Parameter0, &Parameter1) &&
2929                   DAC960_ReportErrorStatus(Controller, ErrorStatus,
2930                                            Parameter0, Parameter1))
2931                 goto Failure;
2932               udelay(10);
2933             }
2934           if (!DAC960_V1_EnableMemoryMailboxInterface(Controller))
2935             {
2936               DAC960_Error("Unable to Enable Memory Mailbox Interface "
2937                            "for Controller at\n", Controller);
2938               goto Failure;
2939             }
2940           DAC960_PG_EnableInterrupts(BaseAddress);
2941           if (Controller->V1.DualModeMemoryMailboxInterface)
2942             Controller->QueueCommand = DAC960_PG_QueueCommandDualMode;
2943           else Controller->QueueCommand = DAC960_PG_QueueCommandSingleMode;
2944           Controller->ReadControllerConfiguration =
2945             DAC960_V1_ReadControllerConfiguration;
2946           Controller->ReadDeviceConfiguration =
2947             DAC960_V1_ReadDeviceConfiguration;
2948           Controller->ReportDeviceConfiguration =
2949             DAC960_V1_ReportDeviceConfiguration;
2950           Controller->QueueReadWriteCommand =
2951             DAC960_V1_QueueReadWriteCommand;
2952           break;
2953         case DAC960_PD_Controller:
2954           if (!request_region(Controller->IO_Address, 0x80,
2955                               Controller->FullModelName)) {
2956                 DAC960_Error("IO port 0x%d busy for Controller at\n",
2957                              Controller, Controller->IO_Address);
2958                 goto Failure;
2959           }
2960           DAC960_PD_DisableInterrupts(BaseAddress);
2961           DAC960_PD_AcknowledgeStatus(BaseAddress);
2962           udelay(1000);
2963           while (DAC960_PD_InitializationInProgressP(BaseAddress))
2964             {
2965               if (DAC960_PD_ReadErrorStatus(BaseAddress, &ErrorStatus,
2966                                             &Parameter0, &Parameter1) &&
2967                   DAC960_ReportErrorStatus(Controller, ErrorStatus,
2968                                            Parameter0, Parameter1))
2969                 goto Failure;
2970               udelay(10);
2971             }
2972           if (!DAC960_V1_EnableMemoryMailboxInterface(Controller))
2973             {
2974               DAC960_Error("Unable to allocate DMA mapped memory "
2975                            "for Controller at\n", Controller);
2976               goto Failure;
2977             }
2978           DAC960_PD_EnableInterrupts(BaseAddress);
2979           Controller->QueueCommand = DAC960_PD_QueueCommand;
2980           Controller->ReadControllerConfiguration =
2981             DAC960_V1_ReadControllerConfiguration;
2982           Controller->ReadDeviceConfiguration =
2983             DAC960_V1_ReadDeviceConfiguration;
2984           Controller->ReportDeviceConfiguration =
2985             DAC960_V1_ReportDeviceConfiguration;
2986           Controller->QueueReadWriteCommand =
2987             DAC960_V1_QueueReadWriteCommand;
2988           break;
2989         case DAC960_P_Controller:
2990           if (!request_region(Controller->IO_Address, 0x80,
2991                               Controller->FullModelName)){
2992                 DAC960_Error("IO port 0x%d busy for Controller at\n",
2993                              Controller, Controller->IO_Address);
2994                 goto Failure;
2995           }
2996           DAC960_PD_DisableInterrupts(BaseAddress);
2997           DAC960_PD_AcknowledgeStatus(BaseAddress);
2998           udelay(1000);
2999           while (DAC960_PD_InitializationInProgressP(BaseAddress))
3000             {
3001               if (DAC960_PD_ReadErrorStatus(BaseAddress, &ErrorStatus,
3002                                             &Parameter0, &Parameter1) &&
3003                   DAC960_ReportErrorStatus(Controller, ErrorStatus,
3004                                            Parameter0, Parameter1))
3005                 goto Failure;
3006               udelay(10);
3007             }
3008           if (!DAC960_V1_EnableMemoryMailboxInterface(Controller))
3009             {
3010               DAC960_Error("Unable to allocate DMA mapped memory"
3011                            "for Controller at\n", Controller);
3012               goto Failure;
3013             }
3014           DAC960_PD_EnableInterrupts(BaseAddress);
3015           Controller->QueueCommand = DAC960_P_QueueCommand;
3016           Controller->ReadControllerConfiguration =
3017             DAC960_V1_ReadControllerConfiguration;
3018           Controller->ReadDeviceConfiguration =
3019             DAC960_V1_ReadDeviceConfiguration;
3020           Controller->ReportDeviceConfiguration =
3021             DAC960_V1_ReportDeviceConfiguration;
3022           Controller->QueueReadWriteCommand =
3023             DAC960_V1_QueueReadWriteCommand;
3024           break;
3025   }
3026   /*
3027      Acquire shared access to the IRQ Channel.
3028   */
3029   IRQ_Channel = PCI_Device->irq;
3030   if (request_irq(IRQ_Channel, InterruptHandler, IRQF_SHARED,
3031                       Controller->FullModelName, Controller) < 0)
3032   {
3033         DAC960_Error("Unable to acquire IRQ Channel %d for Controller at\n",
3034                        Controller, Controller->IRQ_Channel);
3035         goto Failure;
3036   }
3037   Controller->IRQ_Channel = IRQ_Channel;
3038   Controller->InitialCommand.CommandIdentifier = 1;
3039   Controller->InitialCommand.Controller = Controller;
3040   Controller->Commands[0] = &Controller->InitialCommand;
3041   Controller->FreeCommands = &Controller->InitialCommand;
3042   return Controller;
3043
3044 Failure:
3045   if (Controller->IO_Address == 0)
3046         DAC960_Error("PCI Bus %d Device %d Function %d I/O Address N/A "
3047                      "PCI Address 0x%X\n", Controller,
3048                      Controller->Bus, Controller->Device,
3049                      Controller->Function, Controller->PCI_Address);
3050   else
3051         DAC960_Error("PCI Bus %d Device %d Function %d I/O Address "
3052                         "0x%X PCI Address 0x%X\n", Controller,
3053                         Controller->Bus, Controller->Device,
3054                         Controller->Function, Controller->IO_Address,
3055                         Controller->PCI_Address);
3056   DAC960_DetectCleanup(Controller);
3057   DAC960_ControllerCount--;
3058   return NULL;
3059 }
3060
3061 /*
3062   DAC960_InitializeController initializes Controller.
3063 */
3064
3065 static bool
3066 DAC960_InitializeController(DAC960_Controller_T *Controller)
3067 {
3068   if (DAC960_ReadControllerConfiguration(Controller) &&
3069       DAC960_ReportControllerConfiguration(Controller) &&
3070       DAC960_CreateAuxiliaryStructures(Controller) &&
3071       DAC960_ReadDeviceConfiguration(Controller) &&
3072       DAC960_ReportDeviceConfiguration(Controller) &&
3073       DAC960_RegisterBlockDevice(Controller))
3074     {
3075       /*
3076         Initialize the Monitoring Timer.
3077       */
3078       init_timer(&Controller->MonitoringTimer);
3079       Controller->MonitoringTimer.expires =
3080         jiffies + DAC960_MonitoringTimerInterval;
3081       Controller->MonitoringTimer.data = (unsigned long) Controller;
3082       Controller->MonitoringTimer.function = DAC960_MonitoringTimerFunction;
3083       add_timer(&Controller->MonitoringTimer);
3084       Controller->ControllerInitialized = true;
3085       return true;
3086     }
3087   return false;
3088 }
3089
3090
3091 /*
3092   DAC960_FinalizeController finalizes Controller.
3093 */
3094
3095 static void DAC960_FinalizeController(DAC960_Controller_T *Controller)
3096 {
3097   if (Controller->ControllerInitialized)
3098     {
3099       unsigned long flags;
3100
3101       /*
3102        * Acquiring and releasing lock here eliminates
3103        * a very low probability race.
3104        *
3105        * The code below allocates controller command structures
3106        * from the free list without holding the controller lock.
3107        * This is safe assuming there is no other activity on
3108        * the controller at the time.
3109        *
3110        * But, there might be a monitoring command still
3111        * in progress.  Setting the Shutdown flag while holding
3112        * the lock ensures that there is no monitoring command
3113        * in the interrupt handler currently, and any monitoring
3114        * commands that complete from this time on will NOT return
3115        * their command structure to the free list.
3116        */
3117
3118       spin_lock_irqsave(&Controller->queue_lock, flags);
3119       Controller->ShutdownMonitoringTimer = 1;
3120       spin_unlock_irqrestore(&Controller->queue_lock, flags);
3121
3122       del_timer_sync(&Controller->MonitoringTimer);
3123       if (Controller->FirmwareType == DAC960_V1_Controller)
3124         {
3125           DAC960_Notice("Flushing Cache...", Controller);
3126           DAC960_V1_ExecuteType3(Controller, DAC960_V1_Flush, 0);
3127           DAC960_Notice("done\n", Controller);
3128
3129           if (Controller->HardwareType == DAC960_PD_Controller)
3130               release_region(Controller->IO_Address, 0x80);
3131         }
3132       else
3133         {
3134           DAC960_Notice("Flushing Cache...", Controller);
3135           DAC960_V2_DeviceOperation(Controller, DAC960_V2_PauseDevice,
3136                                     DAC960_V2_RAID_Controller);
3137           DAC960_Notice("done\n", Controller);
3138         }
3139     }
3140   DAC960_UnregisterBlockDevice(Controller);
3141   DAC960_DestroyAuxiliaryStructures(Controller);
3142   DAC960_DestroyProcEntries(Controller);
3143   DAC960_DetectCleanup(Controller);
3144 }
3145
3146
3147 /*
3148   DAC960_Probe verifies controller's existence and
3149   initializes the DAC960 Driver for that controller.
3150 */
3151
3152 static int
3153 DAC960_Probe(struct pci_dev *dev, const struct pci_device_id *entry)
3154 {
3155   int disk;
3156   DAC960_Controller_T *Controller;
3157
3158   if (DAC960_ControllerCount == DAC960_MaxControllers)
3159   {
3160         DAC960_Error("More than %d DAC960 Controllers detected - "
3161                        "ignoring from Controller at\n",
3162                        NULL, DAC960_MaxControllers);
3163         return -ENODEV;
3164   }
3165
3166   Controller = DAC960_DetectController(dev, entry);
3167   if (!Controller)
3168         return -ENODEV;
3169
3170   if (!DAC960_InitializeController(Controller)) {
3171         DAC960_FinalizeController(Controller);
3172         return -ENODEV;
3173   }
3174
3175   for (disk = 0; disk < DAC960_MaxLogicalDrives; disk++) {
3176         set_capacity(Controller->disks[disk], disk_size(Controller, disk));
3177         add_disk(Controller->disks[disk]);
3178   }
3179   DAC960_CreateProcEntries(Controller);
3180   return 0;
3181 }
3182
3183
3184 /*
3185   DAC960_Finalize finalizes the DAC960 Driver.
3186 */
3187
3188 static void DAC960_Remove(struct pci_dev *PCI_Device)
3189 {
3190   int Controller_Number = (long)pci_get_drvdata(PCI_Device);
3191   DAC960_Controller_T *Controller = DAC960_Controllers[Controller_Number];
3192   if (Controller != NULL)
3193       DAC960_FinalizeController(Controller);
3194 }
3195
3196
3197 /*
3198   DAC960_V1_QueueReadWriteCommand prepares and queues a Read/Write Command for
3199   DAC960 V1 Firmware Controllers.
3200 */
3201
3202 static void DAC960_V1_QueueReadWriteCommand(DAC960_Command_T *Command)
3203 {
3204   DAC960_Controller_T *Controller = Command->Controller;
3205   DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
3206   DAC960_V1_ScatterGatherSegment_T *ScatterGatherList =
3207                                         Command->V1.ScatterGatherList;
3208   struct scatterlist *ScatterList = Command->V1.ScatterList;
3209
3210   DAC960_V1_ClearCommand(Command);
3211
3212   if (Command->SegmentCount == 1)
3213     {
3214       if (Command->DmaDirection == PCI_DMA_FROMDEVICE)
3215         CommandMailbox->Type5.CommandOpcode = DAC960_V1_Read;
3216       else
3217         CommandMailbox->Type5.CommandOpcode = DAC960_V1_Write;
3218
3219       CommandMailbox->Type5.LD.TransferLength = Command->BlockCount;
3220       CommandMailbox->Type5.LD.LogicalDriveNumber = Command->LogicalDriveNumber;
3221       CommandMailbox->Type5.LogicalBlockAddress = Command->BlockNumber;
3222       CommandMailbox->Type5.BusAddress =
3223                         (DAC960_BusAddress32_T)sg_dma_address(ScatterList);
3224     }
3225   else
3226     {
3227       int i;
3228
3229       if (Command->DmaDirection == PCI_DMA_FROMDEVICE)
3230         CommandMailbox->Type5.CommandOpcode = DAC960_V1_ReadWithScatterGather;
3231       else
3232         CommandMailbox->Type5.CommandOpcode = DAC960_V1_WriteWithScatterGather;
3233
3234       CommandMailbox->Type5.LD.TransferLength = Command->BlockCount;
3235       CommandMailbox->Type5.LD.LogicalDriveNumber = Command->LogicalDriveNumber;
3236       CommandMailbox->Type5.LogicalBlockAddress = Command->BlockNumber;
3237       CommandMailbox->Type5.BusAddress = Command->V1.ScatterGatherListDMA;
3238
3239       CommandMailbox->Type5.ScatterGatherCount = Command->SegmentCount;
3240
3241       for (i = 0; i < Command->SegmentCount; i++, ScatterList++, ScatterGatherList++) {
3242                 ScatterGatherList->SegmentDataPointer =
3243                         (DAC960_BusAddress32_T)sg_dma_address(ScatterList);
3244                 ScatterGatherList->SegmentByteCount =
3245                         (DAC960_ByteCount32_T)sg_dma_len(ScatterList);
3246       }
3247     }
3248   DAC960_QueueCommand(Command);
3249 }
3250
3251
3252 /*
3253   DAC960_V2_QueueReadWriteCommand prepares and queues a Read/Write Command for
3254   DAC960 V2 Firmware Controllers.
3255 */
3256
3257 static void DAC960_V2_QueueReadWriteCommand(DAC960_Command_T *Command)
3258 {
3259   DAC960_Controller_T *Controller = Command->Controller;
3260   DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
3261   struct scatterlist *ScatterList = Command->V2.ScatterList;
3262
3263   DAC960_V2_ClearCommand(Command);
3264
3265   CommandMailbox->SCSI_10.CommandOpcode = DAC960_V2_SCSI_10;
3266   CommandMailbox->SCSI_10.CommandControlBits.DataTransferControllerToHost =
3267     (Command->DmaDirection == PCI_DMA_FROMDEVICE);
3268   CommandMailbox->SCSI_10.DataTransferSize =
3269     Command->BlockCount << DAC960_BlockSizeBits;
3270   CommandMailbox->SCSI_10.RequestSenseBusAddress = Command->V2.RequestSenseDMA;
3271   CommandMailbox->SCSI_10.PhysicalDevice =
3272     Controller->V2.LogicalDriveToVirtualDevice[Command->LogicalDriveNumber];
3273   CommandMailbox->SCSI_10.RequestSenseSize = sizeof(DAC960_SCSI_RequestSense_T);
3274   CommandMailbox->SCSI_10.CDBLength = 10;
3275   CommandMailbox->SCSI_10.SCSI_CDB[0] =
3276     (Command->DmaDirection == PCI_DMA_FROMDEVICE ? 0x28 : 0x2A);
3277   CommandMailbox->SCSI_10.SCSI_CDB[2] = Command->BlockNumber >> 24;
3278   CommandMailbox->SCSI_10.SCSI_CDB[3] = Command->BlockNumber >> 16;
3279   CommandMailbox->SCSI_10.SCSI_CDB[4] = Command->BlockNumber >> 8;
3280   CommandMailbox->SCSI_10.SCSI_CDB[5] = Command->BlockNumber;
3281   CommandMailbox->SCSI_10.SCSI_CDB[7] = Command->BlockCount >> 8;
3282   CommandMailbox->SCSI_10.SCSI_CDB[8] = Command->BlockCount;
3283
3284   if (Command->SegmentCount == 1)
3285     {
3286       CommandMailbox->SCSI_10.DataTransferMemoryAddress
3287                              .ScatterGatherSegments[0]
3288                              .SegmentDataPointer =
3289         (DAC960_BusAddress64_T)sg_dma_address(ScatterList);
3290       CommandMailbox->SCSI_10.DataTransferMemoryAddress
3291                              .ScatterGatherSegments[0]
3292                              .SegmentByteCount =
3293         CommandMailbox->SCSI_10.DataTransferSize;
3294     }
3295   else
3296     {
3297       DAC960_V2_ScatterGatherSegment_T *ScatterGatherList;
3298       int i;
3299
3300       if (Command->SegmentCount > 2)
3301         {
3302           ScatterGatherList = Command->V2.ScatterGatherList;
3303           CommandMailbox->SCSI_10.CommandControlBits
3304                          .AdditionalScatterGatherListMemory = true;
3305           CommandMailbox->SCSI_10.DataTransferMemoryAddress
3306                 .ExtendedScatterGather.ScatterGatherList0Length = Command->SegmentCount;
3307           CommandMailbox->SCSI_10.DataTransferMemoryAddress
3308                          .ExtendedScatterGather.ScatterGatherList0Address =
3309             Command->V2.ScatterGatherListDMA;
3310         }
3311       else
3312         ScatterGatherList = CommandMailbox->SCSI_10.DataTransferMemoryAddress
3313                                  .ScatterGatherSegments;
3314
3315       for (i = 0; i < Command->SegmentCount; i++, ScatterList++, ScatterGatherList++) {
3316                 ScatterGatherList->SegmentDataPointer =
3317                         (DAC960_BusAddress64_T)sg_dma_address(ScatterList);
3318                 ScatterGatherList->SegmentByteCount =
3319                         (DAC960_ByteCount64_T)sg_dma_len(ScatterList);
3320       }
3321     }
3322   DAC960_QueueCommand(Command);
3323 }
3324
3325
3326 static int DAC960_process_queue(DAC960_Controller_T *Controller, struct request_queue *req_q)
3327 {
3328         struct request *Request;
3329         DAC960_Command_T *Command;
3330
3331    while(1) {
3332         Request = blk_peek_request(req_q);
3333         if (!Request)
3334                 return 1;
3335
3336         Command = DAC960_AllocateCommand(Controller);
3337         if (Command == NULL)
3338                 return 0;
3339
3340         if (rq_data_dir(Request) == READ) {
3341                 Command->DmaDirection = PCI_DMA_FROMDEVICE;
3342                 Command->CommandType = DAC960_ReadCommand;
3343         } else {
3344                 Command->DmaDirection = PCI_DMA_TODEVICE;
3345                 Command->CommandType = DAC960_WriteCommand;
3346         }
3347         Command->Completion = Request->end_io_data;
3348         Command->LogicalDriveNumber = (long)Request->rq_disk->private_data;
3349         Command->BlockNumber = blk_rq_pos(Request);
3350         Command->BlockCount = blk_rq_sectors(Request);
3351         Command->Request = Request;
3352         blk_start_request(Request);
3353         Command->SegmentCount = blk_rq_map_sg(req_q,
3354                   Command->Request, Command->cmd_sglist);
3355         /* pci_map_sg MAY change the value of SegCount */
3356         Command->SegmentCount = pci_map_sg(Controller->PCIDevice, Command->cmd_sglist,
3357                  Command->SegmentCount, Command->DmaDirection);
3358
3359         DAC960_QueueReadWriteCommand(Command);
3360   }
3361 }
3362
3363 /*
3364   DAC960_ProcessRequest attempts to remove one I/O Request from Controller's
3365   I/O Request Queue and queues it to the Controller.  WaitForCommand is true if
3366   this function should wait for a Command to become available if necessary.
3367   This function returns true if an I/O Request was queued and false otherwise.
3368 */
3369 static void DAC960_ProcessRequest(DAC960_Controller_T *controller)
3370 {
3371         int i;
3372
3373         if (!controller->ControllerInitialized)
3374                 return;
3375
3376         /* Do this better later! */
3377         for (i = controller->req_q_index; i < DAC960_MaxLogicalDrives; i++) {
3378                 struct request_queue *req_q = controller->RequestQueue[i];
3379
3380                 if (req_q == NULL)
3381                         continue;
3382
3383                 if (!DAC960_process_queue(controller, req_q)) {
3384                         controller->req_q_index = i;
3385                         return;
3386                 }
3387         }
3388
3389         if (controller->req_q_index == 0)
3390                 return;
3391
3392         for (i = 0; i < controller->req_q_index; i++) {
3393                 struct request_queue *req_q = controller->RequestQueue[i];
3394
3395                 if (req_q == NULL)
3396                         continue;
3397
3398                 if (!DAC960_process_queue(controller, req_q)) {
3399                         controller->req_q_index = i;
3400                         return;
3401                 }
3402         }
3403 }
3404
3405
3406 /*
3407   DAC960_queue_partial_rw extracts one bio from the request already
3408   associated with argument command, and construct a new command block to retry I/O
3409   only on that bio.  Queue that command to the controller.
3410
3411   This function re-uses a previously-allocated Command,
3412         there is no failure mode from trying to allocate a command.
3413 */
3414
3415 static void DAC960_queue_partial_rw(DAC960_Command_T *Command)
3416 {
3417   DAC960_Controller_T *Controller = Command->Controller;
3418   struct request *Request = Command->Request;
3419   struct request_queue *req_q = Controller->RequestQueue[Command->LogicalDriveNumber];
3420
3421   if (Command->DmaDirection == PCI_DMA_FROMDEVICE)
3422     Command->CommandType = DAC960_ReadRetryCommand;
3423   else
3424     Command->CommandType = DAC960_WriteRetryCommand;
3425
3426   /*
3427    * We could be more efficient with these mapping requests
3428    * and map only the portions that we need.  But since this
3429    * code should almost never be called, just go with a
3430    * simple coding.
3431    */
3432   (void)blk_rq_map_sg(req_q, Command->Request, Command->cmd_sglist);
3433
3434   (void)pci_map_sg(Controller->PCIDevice, Command->cmd_sglist, 1, Command->DmaDirection);
3435   /*
3436    * Resubmitting the request sector at a time is really tedious.
3437    * But, this should almost never happen.  So, we're willing to pay
3438    * this price so that in the end, as much of the transfer is completed
3439    * successfully as possible.
3440    */
3441   Command->SegmentCount = 1;
3442   Command->BlockNumber = blk_rq_pos(Request);
3443   Command->BlockCount = 1;
3444   DAC960_QueueReadWriteCommand(Command);
3445   return;
3446 }
3447
3448 /*
3449   DAC960_RequestFunction is the I/O Request Function for DAC960 Controllers.
3450 */
3451
3452 static void DAC960_RequestFunction(struct request_queue *RequestQueue)
3453 {
3454         DAC960_ProcessRequest(RequestQueue->queuedata);
3455 }
3456
3457 /*
3458   DAC960_ProcessCompletedBuffer performs completion processing for an
3459   individual Buffer.
3460 */
3461
3462 static inline bool DAC960_ProcessCompletedRequest(DAC960_Command_T *Command,
3463                                                  bool SuccessfulIO)
3464 {
3465         struct request *Request = Command->Request;
3466         int Error = SuccessfulIO ? 0 : -EIO;
3467
3468         pci_unmap_sg(Command->Controller->PCIDevice, Command->cmd_sglist,
3469                 Command->SegmentCount, Command->DmaDirection);
3470
3471          if (!__blk_end_request(Request, Error, Command->BlockCount << 9)) {
3472                 if (Command->Completion) {
3473                         complete(Command->Completion);
3474                         Command->Completion = NULL;
3475                 }
3476                 return true;
3477         }
3478         return false;
3479 }
3480
3481 /*
3482   DAC960_V1_ReadWriteError prints an appropriate error message for Command
3483   when an error occurs on a Read or Write operation.
3484 */
3485
3486 static void DAC960_V1_ReadWriteError(DAC960_Command_T *Command)
3487 {
3488   DAC960_Controller_T *Controller = Command->Controller;
3489   unsigned char *CommandName = "UNKNOWN";
3490   switch (Command->CommandType)
3491     {
3492     case DAC960_ReadCommand:
3493     case DAC960_ReadRetryCommand:
3494       CommandName = "READ";
3495       break;
3496     case DAC960_WriteCommand:
3497     case DAC960_WriteRetryCommand:
3498       CommandName = "WRITE";
3499       break;
3500     case DAC960_MonitoringCommand:
3501     case DAC960_ImmediateCommand:
3502     case DAC960_QueuedCommand:
3503       break;
3504     }
3505   switch (Command->V1.CommandStatus)
3506     {
3507     case DAC960_V1_IrrecoverableDataError:
3508       DAC960_Error("Irrecoverable Data Error on %s:\n",
3509                    Controller, CommandName);
3510       break;
3511     case DAC960_V1_LogicalDriveNonexistentOrOffline:
3512       DAC960_Error("Logical Drive Nonexistent or Offline on %s:\n",
3513                    Controller, CommandName);
3514       break;
3515     case DAC960_V1_AccessBeyondEndOfLogicalDrive:
3516       DAC960_Error("Attempt to Access Beyond End of Logical Drive "
3517                    "on %s:\n", Controller, CommandName);
3518       break;
3519     case DAC960_V1_BadDataEncountered:
3520       DAC960_Error("Bad Data Encountered on %s:\n", Controller, CommandName);
3521       break;
3522     default:
3523       DAC960_Error("Unexpected Error Status %04X on %s:\n",
3524                    Controller, Command->V1.CommandStatus, CommandName);
3525       break;
3526     }
3527   DAC960_Error("  /dev/rd/c%dd%d:   absolute blocks %u..%u\n",
3528                Controller, Controller->ControllerNumber,
3529                Command->LogicalDriveNumber, Command->BlockNumber,
3530                Command->BlockNumber + Command->BlockCount - 1);
3531 }
3532
3533
3534 /*
3535   DAC960_V1_ProcessCompletedCommand performs completion processing for Command
3536   for DAC960 V1 Firmware Controllers.
3537 */
3538
3539 static void DAC960_V1_ProcessCompletedCommand(DAC960_Command_T *Command)
3540 {
3541   DAC960_Controller_T *Controller = Command->Controller;
3542   DAC960_CommandType_T CommandType = Command->CommandType;
3543   DAC960_V1_CommandOpcode_T CommandOpcode =
3544     Command->V1.CommandMailbox.Common.CommandOpcode;
3545   DAC960_V1_CommandStatus_T CommandStatus = Command->V1.CommandStatus;
3546
3547   if (CommandType == DAC960_ReadCommand ||
3548       CommandType == DAC960_WriteCommand)
3549     {
3550
3551 #ifdef FORCE_RETRY_DEBUG
3552       CommandStatus = DAC960_V1_IrrecoverableDataError;
3553 #endif
3554
3555       if (CommandStatus == DAC960_V1_NormalCompletion) {
3556
3557                 if (!DAC960_ProcessCompletedRequest(Command, true))
3558                         BUG();
3559
3560       } else if (CommandStatus == DAC960_V1_IrrecoverableDataError ||
3561                 CommandStatus == DAC960_V1_BadDataEncountered)
3562         {
3563           /*
3564            * break the command down into pieces and resubmit each
3565            * piece, hoping that some of them will succeed.
3566            */
3567            DAC960_queue_partial_rw(Command);
3568            return;
3569         }
3570       else
3571         {
3572           if (CommandStatus != DAC960_V1_LogicalDriveNonexistentOrOffline)
3573             DAC960_V1_ReadWriteError(Command);
3574
3575          if (!DAC960_ProcessCompletedRequest(Command, false))
3576                 BUG();
3577         }
3578     }
3579   else if (CommandType == DAC960_ReadRetryCommand ||
3580            CommandType == DAC960_WriteRetryCommand)
3581     {
3582       bool normal_completion;
3583 #ifdef FORCE_RETRY_FAILURE_DEBUG
3584       static int retry_count = 1;
3585 #endif
3586       /*
3587         Perform completion processing for the portion that was
3588         retried, and submit the next portion, if any.
3589       */
3590       normal_completion = true;
3591       if (CommandStatus != DAC960_V1_NormalCompletion) {
3592         normal_completion = false;
3593         if (CommandStatus != DAC960_V1_LogicalDriveNonexistentOrOffline)
3594             DAC960_V1_ReadWriteError(Command);
3595       }
3596
3597 #ifdef FORCE_RETRY_FAILURE_DEBUG
3598       if (!(++retry_count % 10000)) {
3599               printk("V1 error retry failure test\n");
3600               normal_completion = false;
3601               DAC960_V1_ReadWriteError(Command);
3602       }
3603 #endif
3604
3605       if (!DAC960_ProcessCompletedRequest(Command, normal_completion)) {
3606         DAC960_queue_partial_rw(Command);
3607         return;
3608       }
3609     }
3610
3611   else if (CommandType == DAC960_MonitoringCommand)
3612     {
3613       if (Controller->ShutdownMonitoringTimer)
3614               return;
3615       if (CommandOpcode == DAC960_V1_Enquiry)
3616         {
3617           DAC960_V1_Enquiry_T *OldEnquiry = &Controller->V1.Enquiry;
3618           DAC960_V1_Enquiry_T *NewEnquiry = Controller->V1.NewEnquiry;
3619           unsigned int OldCriticalLogicalDriveCount =
3620             OldEnquiry->CriticalLogicalDriveCount;
3621           unsigned int NewCriticalLogicalDriveCount =
3622             NewEnquiry->CriticalLogicalDriveCount;
3623           if (NewEnquiry->NumberOfLogicalDrives > Controller->LogicalDriveCount)
3624             {
3625               int LogicalDriveNumber = Controller->LogicalDriveCount - 1;
3626               while (++LogicalDriveNumber < NewEnquiry->NumberOfLogicalDrives)
3627                 DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) "
3628                                 "Now Exists\n", Controller,
3629                                 LogicalDriveNumber,
3630                                 Controller->ControllerNumber,
3631                                 LogicalDriveNumber);
3632               Controller->LogicalDriveCount = NewEnquiry->NumberOfLogicalDrives;
3633               DAC960_ComputeGenericDiskInfo(Controller);
3634             }
3635           if (NewEnquiry->NumberOfLogicalDrives < Controller->LogicalDriveCount)
3636             {
3637               int LogicalDriveNumber = NewEnquiry->NumberOfLogicalDrives - 1;
3638               while (++LogicalDriveNumber < Controller->LogicalDriveCount)
3639                 DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) "
3640                                 "No Longer Exists\n", Controller,
3641                                 LogicalDriveNumber,
3642                                 Controller->ControllerNumber,
3643                                 LogicalDriveNumber);
3644               Controller->LogicalDriveCount = NewEnquiry->NumberOfLogicalDrives;
3645               DAC960_ComputeGenericDiskInfo(Controller);
3646             }
3647           if (NewEnquiry->StatusFlags.DeferredWriteError !=
3648               OldEnquiry->StatusFlags.DeferredWriteError)
3649             DAC960_Critical("Deferred Write Error Flag is now %s\n", Controller,
3650                             (NewEnquiry->StatusFlags.DeferredWriteError
3651                              ? "TRUE" : "FALSE"));
3652           if ((NewCriticalLogicalDriveCount > 0 ||
3653                NewCriticalLogicalDriveCount != OldCriticalLogicalDriveCount) ||
3654               (NewEnquiry->OfflineLogicalDriveCount > 0 ||
3655                NewEnquiry->OfflineLogicalDriveCount !=
3656                OldEnquiry->OfflineLogicalDriveCount) ||
3657               (NewEnquiry->DeadDriveCount > 0 ||
3658                NewEnquiry->DeadDriveCount !=
3659                OldEnquiry->DeadDriveCount) ||
3660               (NewEnquiry->EventLogSequenceNumber !=
3661                OldEnquiry->EventLogSequenceNumber) ||
3662               Controller->MonitoringTimerCount == 0 ||
3663               time_after_eq(jiffies, Controller->SecondaryMonitoringTime
3664                + DAC960_SecondaryMonitoringInterval))
3665             {
3666               Controller->V1.NeedLogicalDriveInformation = true;
3667               Controller->V1.NewEventLogSequenceNumber =
3668                 NewEnquiry->EventLogSequenceNumber;
3669               Controller->V1.NeedErrorTableInformation = true;
3670               Controller->V1.NeedDeviceStateInformation = true;
3671               Controller->V1.StartDeviceStateScan = true;
3672               Controller->V1.NeedBackgroundInitializationStatus =
3673                 Controller->V1.BackgroundInitializationStatusSupported;
3674               Controller->SecondaryMonitoringTime = jiffies;
3675             }
3676           if (NewEnquiry->RebuildFlag == DAC960_V1_StandbyRebuildInProgress ||
3677               NewEnquiry->RebuildFlag
3678               == DAC960_V1_BackgroundRebuildInProgress ||
3679               OldEnquiry->RebuildFlag == DAC960_V1_StandbyRebuildInProgress ||
3680               OldEnquiry->RebuildFlag == DAC960_V1_BackgroundRebuildInProgress)
3681             {
3682               Controller->V1.NeedRebuildProgress = true;
3683               Controller->V1.RebuildProgressFirst =
3684                 (NewEnquiry->CriticalLogicalDriveCount <
3685                  OldEnquiry->CriticalLogicalDriveCount);
3686             }
3687           if (OldEnquiry->RebuildFlag == DAC960_V1_BackgroundCheckInProgress)
3688             switch (NewEnquiry->RebuildFlag)
3689               {
3690               case DAC960_V1_NoStandbyRebuildOrCheckInProgress:
3691                 DAC960_Progress("Consistency Check Completed Successfully\n",
3692                                 Controller);
3693                 break;
3694               case DAC960_V1_StandbyRebuildInProgress:
3695               case DAC960_V1_BackgroundRebuildInProgress:
3696                 break;
3697               case DAC960_V1_BackgroundCheckInProgress:
3698                 Controller->V1.NeedConsistencyCheckProgress = true;
3699                 break;
3700               case DAC960_V1_StandbyRebuildCompletedWithError:
3701                 DAC960_Progress("Consistency Check Completed with Error\n",
3702                                 Controller);
3703                 break;
3704               case DAC960_V1_BackgroundRebuildOrCheckFailed_DriveFailed:
3705                 DAC960_Progress("Consistency Check Failed - "
3706                                 "Physical Device Failed\n", Controller);
3707                 break;
3708               case DAC960_V1_BackgroundRebuildOrCheckFailed_LogicalDriveFailed:
3709                 DAC960_Progress("Consistency Check Failed - "
3710                                 "Logical Drive Failed\n", Controller);
3711                 break;
3712               case DAC960_V1_BackgroundRebuildOrCheckFailed_OtherCauses:
3713                 DAC960_Progress("Consistency Check Failed - Other Causes\n",
3714                                 Controller);
3715                 break;
3716               case DAC960_V1_BackgroundRebuildOrCheckSuccessfullyTerminated:
3717                 DAC960_Progress("Consistency Check Successfully Terminated\n",
3718                                 Controller);
3719                 break;
3720               }
3721           else if (NewEnquiry->RebuildFlag
3722                    == DAC960_V1_BackgroundCheckInProgress)
3723             Controller->V1.NeedConsistencyCheckProgress = true;
3724           Controller->MonitoringAlertMode =
3725             (NewEnquiry->CriticalLogicalDriveCount > 0 ||
3726              NewEnquiry->OfflineLogicalDriveCount > 0 ||
3727              NewEnquiry->DeadDriveCount > 0);
3728           if (NewEnquiry->RebuildFlag > DAC960_V1_BackgroundCheckInProgress)
3729             {
3730               Controller->V1.PendingRebuildFlag = NewEnquiry->RebuildFlag;
3731               Controller->V1.RebuildFlagPending = true;
3732             }
3733           memcpy(&Controller->V1.Enquiry, &Controller->V1.NewEnquiry,
3734                  sizeof(DAC960_V1_Enquiry_T));
3735         }
3736       else if (CommandOpcode == DAC960_V1_PerformEventLogOperation)
3737         {
3738           static char
3739             *DAC960_EventMessages[] =
3740                { "killed because write recovery failed",
3741                  "killed because of SCSI bus reset failure",
3742                  "killed because of double check condition",
3743                  "killed because it was removed",
3744                  "killed because of gross error on SCSI chip",
3745                  "killed because of bad tag returned from drive",
3746                  "killed because of timeout on SCSI command",
3747                  "killed because of reset SCSI command issued from system",
3748                  "killed because busy or parity error count exceeded limit",
3749                  "killed because of 'kill drive' command from system",
3750                  "killed because of selection timeout",
3751                  "killed due to SCSI phase sequence error",
3752                  "killed due to unknown status" };
3753           DAC960_V1_EventLogEntry_T *EventLogEntry =
3754                 Controller->V1.EventLogEntry;
3755           if (EventLogEntry->SequenceNumber ==
3756               Controller->V1.OldEventLogSequenceNumber)
3757             {
3758               unsigned char SenseKey = EventLogEntry->SenseKey;
3759               unsigned char AdditionalSenseCode =
3760                 EventLogEntry->AdditionalSenseCode;
3761               unsigned char AdditionalSenseCodeQualifier =
3762                 EventLogEntry->AdditionalSenseCodeQualifier;
3763               if (SenseKey == DAC960_SenseKey_VendorSpecific &&
3764                   AdditionalSenseCode == 0x80 &&
3765                   AdditionalSenseCodeQualifier <
3766                   ARRAY_SIZE(DAC960_EventMessages))
3767                 DAC960_Critical("Physical Device %d:%d %s\n", Controller,
3768                                 EventLogEntry->Channel,
3769                                 EventLogEntry->TargetID,
3770                                 DAC960_EventMessages[
3771                                   AdditionalSenseCodeQualifier]);
3772               else if (SenseKey == DAC960_SenseKey_UnitAttention &&
3773                        AdditionalSenseCode == 0x29)
3774                 {
3775                   if (Controller->MonitoringTimerCount > 0)
3776                     Controller->V1.DeviceResetCount[EventLogEntry->Channel]
3777                                                    [EventLogEntry->TargetID]++;
3778                 }
3779               else if (!(SenseKey == DAC960_SenseKey_NoSense ||
3780                          (SenseKey == DAC960_SenseKey_NotReady &&
3781                           AdditionalSenseCode == 0x04 &&
3782                           (AdditionalSenseCodeQualifier == 0x01 ||
3783                            AdditionalSenseCodeQualifier == 0x02))))
3784                 {
3785                   DAC960_Critical("Physical Device %d:%d Error Log: "
3786                                   "Sense Key = %X, ASC = %02X, ASCQ = %02X\n",
3787                                   Controller,
3788                                   EventLogEntry->Channel,
3789                                   EventLogEntry->TargetID,
3790                                   SenseKey,
3791                                   AdditionalSenseCode,
3792                                   AdditionalSenseCodeQualifier);
3793                   DAC960_Critical("Physical Device %d:%d Error Log: "
3794                                   "Information = %02X%02X%02X%02X "
3795                                   "%02X%02X%02X%02X\n",
3796                                   Controller,
3797                                   EventLogEntry->Channel,
3798                                   EventLogEntry->TargetID,
3799                                   EventLogEntry->Information[0],
3800                                   EventLogEntry->Information[1],
3801                                   EventLogEntry->Information[2],
3802                                   EventLogEntry->Information[3],
3803                                   EventLogEntry->CommandSpecificInformation[0],
3804                                   EventLogEntry->CommandSpecificInformation[1],
3805                                   EventLogEntry->CommandSpecificInformation[2],
3806                                   EventLogEntry->CommandSpecificInformation[3]);
3807                 }
3808             }
3809           Controller->V1.OldEventLogSequenceNumber++;
3810         }
3811       else if (CommandOpcode == DAC960_V1_GetErrorTable)
3812         {
3813           DAC960_V1_ErrorTable_T *OldErrorTable = &Controller->V1.ErrorTable;
3814           DAC960_V1_ErrorTable_T *NewErrorTable = Controller->V1.NewErrorTable;
3815           int Channel, TargetID;
3816           for (Channel = 0; Channel < Controller->Channels; Channel++)
3817             for (TargetID = 0; TargetID < Controller->Targets; TargetID++)
3818               {
3819                 DAC960_V1_ErrorTableEntry_T *NewErrorEntry =
3820                   &NewErrorTable->ErrorTableEntries[Channel][TargetID];
3821                 DAC960_V1_ErrorTableEntry_T *OldErrorEntry =
3822                   &OldErrorTable->ErrorTableEntries[Channel][TargetID];
3823                 if ((NewErrorEntry->ParityErrorCount !=
3824                      OldErrorEntry->ParityErrorCount) ||
3825                     (NewErrorEntry->SoftErrorCount !=
3826                      OldErrorEntry->SoftErrorCount) ||
3827                     (NewErrorEntry->HardErrorCount !=
3828                      OldErrorEntry->HardErrorCount) ||
3829                     (NewErrorEntry->MiscErrorCount !=
3830                      OldErrorEntry->MiscErrorCount))
3831                   DAC960_Critical("Physical Device %d:%d Errors: "
3832                                   "Parity = %d, Soft = %d, "
3833                                   "Hard = %d, Misc = %d\n",
3834                                   Controller, Channel, TargetID,
3835                                   NewErrorEntry->ParityErrorCount,
3836                                   NewErrorEntry->SoftErrorCount,
3837                                   NewErrorEntry->HardErrorCount,
3838                                   NewErrorEntry->MiscErrorCount);
3839               }
3840           memcpy(&Controller->V1.ErrorTable, Controller->V1.NewErrorTable,
3841                  sizeof(DAC960_V1_ErrorTable_T));
3842         }
3843       else if (CommandOpcode == DAC960_V1_GetDeviceState)
3844         {
3845           DAC960_V1_DeviceState_T *OldDeviceState =
3846             &Controller->V1.DeviceState[Controller->V1.DeviceStateChannel]
3847                                        [Controller->V1.DeviceStateTargetID];
3848           DAC960_V1_DeviceState_T *NewDeviceState =
3849             Controller->V1.NewDeviceState;
3850           if (NewDeviceState->DeviceState != OldDeviceState->DeviceState)
3851             DAC960_Critical("Physical Device %d:%d is now %s\n", Controller,
3852                             Controller->V1.DeviceStateChannel,
3853                             Controller->V1.DeviceStateTargetID,
3854                             (NewDeviceState->DeviceState
3855                              == DAC960_V1_Device_Dead
3856                              ? "DEAD"
3857                              : NewDeviceState->DeviceState
3858                                == DAC960_V1_Device_WriteOnly
3859                                ? "WRITE-ONLY"
3860                                : NewDeviceState->DeviceState
3861                                  == DAC960_V1_Device_Online
3862                                  ? "ONLINE" : "STANDBY"));
3863           if (OldDeviceState->DeviceState == DAC960_V1_Device_Dead &&
3864               NewDeviceState->DeviceState != DAC960_V1_Device_Dead)
3865             {
3866               Controller->V1.NeedDeviceInquiryInformation = true;
3867               Controller->V1.NeedDeviceSerialNumberInformation = true;
3868               Controller->V1.DeviceResetCount
3869                              [Controller->V1.DeviceStateChannel]
3870                              [Controller->V1.DeviceStateTargetID] = 0;
3871             }
3872           memcpy(OldDeviceState, NewDeviceState,
3873                  sizeof(DAC960_V1_DeviceState_T));
3874         }
3875       else if (CommandOpcode == DAC960_V1_GetLogicalDriveInformation)
3876         {
3877           int LogicalDriveNumber;
3878           for (LogicalDriveNumber = 0;
3879                LogicalDriveNumber < Controller->LogicalDriveCount;
3880                LogicalDriveNumber++)
3881             {
3882               DAC960_V1_LogicalDriveInformation_T *OldLogicalDriveInformation =
3883                 &Controller->V1.LogicalDriveInformation[LogicalDriveNumber];
3884               DAC960_V1_LogicalDriveInformation_T *NewLogicalDriveInformation =
3885                 &(*Controller->V1.NewLogicalDriveInformation)[LogicalDriveNumber];
3886               if (NewLogicalDriveInformation->LogicalDriveState !=
3887                   OldLogicalDriveInformation->LogicalDriveState)
3888                 DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) "
3889                                 "is now %s\n", Controller,
3890                                 LogicalDriveNumber,
3891                                 Controller->ControllerNumber,
3892                                 LogicalDriveNumber,
3893                                 (NewLogicalDriveInformation->LogicalDriveState
3894                                  == DAC960_V1_LogicalDrive_Online
3895                                  ? "ONLINE"
3896                                  : NewLogicalDriveInformation->LogicalDriveState
3897                                    == DAC960_V1_LogicalDrive_Critical
3898                                    ? "CRITICAL" : "OFFLINE"));
3899               if (NewLogicalDriveInformation->WriteBack !=
3900                   OldLogicalDriveInformation->WriteBack)
3901                 DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) "
3902                                 "is now %s\n", Controller,
3903                                 LogicalDriveNumber,
3904                                 Controller->ControllerNumber,
3905                                 LogicalDriveNumber,
3906                                 (NewLogicalDriveInformation->WriteBack
3907                                  ? "WRITE BACK" : "WRITE THRU"));
3908             }
3909           memcpy(&Controller->V1.LogicalDriveInformation,
3910                  Controller->V1.NewLogicalDriveInformation,
3911                  sizeof(DAC960_V1_LogicalDriveInformationArray_T));
3912         }
3913       else if (CommandOpcode == DAC960_V1_GetRebuildProgress)
3914         {
3915           unsigned int LogicalDriveNumber =
3916             Controller->V1.RebuildProgress->LogicalDriveNumber;
3917           unsigned int LogicalDriveSize =
3918             Controller->V1.RebuildProgress->LogicalDriveSize;
3919           unsigned int BlocksCompleted =
3920             LogicalDriveSize - Controller->V1.RebuildProgress->RemainingBlocks;
3921           if (CommandStatus == DAC960_V1_NoRebuildOrCheckInProgress &&
3922               Controller->V1.LastRebuildStatus == DAC960_V1_NormalCompletion)
3923             CommandStatus = DAC960_V1_RebuildSuccessful;
3924           switch (CommandStatus)
3925             {
3926             case DAC960_V1_NormalCompletion:
3927               Controller->EphemeralProgressMessage = true;
3928               DAC960_Progress("Rebuild in Progress: "
3929                               "Logical Drive %d (/dev/rd/c%dd%d) "
3930                               "%d%% completed\n",
3931                               Controller, LogicalDriveNumber,
3932                               Controller->ControllerNumber,
3933                               LogicalDriveNumber,
3934                               (100 * (BlocksCompleted >> 7))
3935                               / (LogicalDriveSize >> 7));
3936               Controller->EphemeralProgressMessage = false;
3937               break;
3938             case DAC960_V1_RebuildFailed_LogicalDriveFailure:
3939               DAC960_Progress("Rebuild Failed due to "
3940                               "Logical Drive Failure\n", Controller);
3941               break;
3942             case DAC960_V1_RebuildFailed_BadBlocksOnOther:
3943               DAC960_Progress("Rebuild Failed due to "
3944                               "Bad Blocks on Other Drives\n", Controller);
3945               break;
3946             case DAC960_V1_RebuildFailed_NewDriveFailed:
3947               DAC960_Progress("Rebuild Failed due to "
3948                               "Failure of Drive Being Rebuilt\n", Controller);
3949               break;
3950             case DAC960_V1_NoRebuildOrCheckInProgress:
3951               break;
3952             case DAC960_V1_RebuildSuccessful:
3953               DAC960_Progress("Rebuild Completed Successfully\n", Controller);
3954               break;
3955             case DAC960_V1_RebuildSuccessfullyTerminated:
3956               DAC960_Progress("Rebuild Successfully Terminated\n", Controller);
3957               break;
3958             }
3959           Controller->V1.LastRebuildStatus = CommandStatus;
3960           if (CommandType != DAC960_MonitoringCommand &&
3961               Controller->V1.RebuildStatusPending)
3962             {
3963               Command->V1.CommandStatus = Controller->V1.PendingRebuildStatus;
3964               Controller->V1.RebuildStatusPending = false;
3965             }
3966           else if (CommandType == DAC960_MonitoringCommand &&
3967                    CommandStatus != DAC960_V1_NormalCompletion &&
3968                    CommandStatus != DAC960_V1_NoRebuildOrCheckInProgress)
3969             {
3970               Controller->V1.PendingRebuildStatus = CommandStatus;
3971               Controller->V1.RebuildStatusPending = true;
3972             }
3973         }
3974       else if (CommandOpcode == DAC960_V1_RebuildStat)
3975         {
3976           unsigned int LogicalDriveNumber =
3977             Controller->V1.RebuildProgress->LogicalDriveNumber;
3978           unsigned int LogicalDriveSize =
3979             Controller->V1.RebuildProgress->LogicalDriveSize;
3980           unsigned int BlocksCompleted =
3981             LogicalDriveSize - Controller->V1.RebuildProgress->RemainingBlocks;
3982           if (CommandStatus == DAC960_V1_NormalCompletion)
3983             {
3984               Controller->EphemeralProgressMessage = true;
3985               DAC960_Progress("Consistency Check in Progress: "
3986                               "Logical Drive %d (/dev/rd/c%dd%d) "
3987                               "%d%% completed\n",
3988                               Controller, LogicalDriveNumber,
3989                               Controller->ControllerNumber,
3990                               LogicalDriveNumber,
3991                               (100 * (BlocksCompleted >> 7))
3992                               / (LogicalDriveSize >> 7));
3993               Controller->EphemeralProgressMessage = false;
3994             }
3995         }
3996       else if (CommandOpcode == DAC960_V1_BackgroundInitializationControl)
3997         {
3998           unsigned int LogicalDriveNumber =
3999             Controller->V1.BackgroundInitializationStatus->LogicalDriveNumber;
4000           unsigned int LogicalDriveSize =
4001             Controller->V1.BackgroundInitializationStatus->LogicalDriveSize;
4002           unsigned int BlocksCompleted =
4003             Controller->V1.BackgroundInitializationStatus->BlocksCompleted;
4004           switch (CommandStatus)
4005             {
4006             case DAC960_V1_NormalCompletion:
4007               switch (Controller->V1.BackgroundInitializationStatus->Status)
4008                 {
4009                 case DAC960_V1_BackgroundInitializationInvalid:
4010                   break;
4011                 case DAC960_V1_BackgroundInitializationStarted:
4012                   DAC960_Progress("Background Initialization Started\n",
4013                                   Controller);
4014                   break;
4015                 case DAC960_V1_BackgroundInitializationInProgress:
4016                   if (BlocksCompleted ==
4017                       Controller->V1.LastBackgroundInitializationStatus.
4018                                 BlocksCompleted &&
4019                       LogicalDriveNumber ==
4020                       Controller->V1.LastBackgroundInitializationStatus.
4021                                 LogicalDriveNumber)
4022                     break;
4023                   Controller->EphemeralProgressMessage = true;
4024                   DAC960_Progress("Background Initialization in Progress: "
4025                                   "Logical Drive %d (/dev/rd/c%dd%d) "
4026                                   "%d%% completed\n",
4027                                   Controller, LogicalDriveNumber,
4028                                   Controller->ControllerNumber,
4029                                   LogicalDriveNumber,
4030                                   (100 * (BlocksCompleted >> 7))
4031                                   / (LogicalDriveSize >> 7));
4032                   Controller->EphemeralProgressMessage = false;
4033                   break;
4034                 case DAC960_V1_BackgroundInitializationSuspended:
4035                   DAC960_Progress("Background Initialization Suspended\n",
4036                                   Controller);
4037                   break;
4038                 case DAC960_V1_BackgroundInitializationCancelled:
4039                   DAC960_Progress("Background Initialization Cancelled\n",
4040                                   Controller);
4041                   break;
4042                 }
4043               memcpy(&Controller->V1.LastBackgroundInitializationStatus,
4044                      Controller->V1.BackgroundInitializationStatus,
4045                      sizeof(DAC960_V1_BackgroundInitializationStatus_T));
4046               break;
4047             case DAC960_V1_BackgroundInitSuccessful:
4048               if (Controller->V1.BackgroundInitializationStatus->Status ==
4049                   DAC960_V1_BackgroundInitializationInProgress)
4050                 DAC960_Progress("Background Initialization "
4051                                 "Completed Successfully\n", Controller);
4052               Controller->V1.BackgroundInitializationStatus->Status =
4053                 DAC960_V1_BackgroundInitializationInvalid;
4054               break;
4055             case DAC960_V1_BackgroundInitAborted:
4056               if (Controller->V1.BackgroundInitializationStatus->Status ==
4057                   DAC960_V1_BackgroundInitializationInProgress)
4058                 DAC960_Progress("Background Initialization Aborted\n",
4059                                 Controller);
4060               Controller->V1.BackgroundInitializationStatus->Status =
4061                 DAC960_V1_BackgroundInitializationInvalid;
4062               break;
4063             case DAC960_V1_NoBackgroundInitInProgress:
4064               break;
4065             }
4066         }
4067       else if (CommandOpcode == DAC960_V1_DCDB)
4068         {
4069            /*
4070              This is a bit ugly.
4071
4072              The InquiryStandardData and
4073              the InquiryUntitSerialNumber information
4074              retrieval operations BOTH use the DAC960_V1_DCDB
4075              commands.  the test above can't distinguish between
4076              these two cases.
4077
4078              Instead, we rely on the order of code later in this
4079              function to ensure that DeviceInquiryInformation commands
4080              are submitted before DeviceSerialNumber commands.
4081            */
4082            if (Controller->V1.NeedDeviceInquiryInformation)
4083              {
4084                 DAC960_SCSI_Inquiry_T *InquiryStandardData =
4085                         &Controller->V1.InquiryStandardData
4086                                 [Controller->V1.DeviceStateChannel]
4087                                 [Controller->V1.DeviceStateTargetID];
4088                 if (CommandStatus != DAC960_V1_NormalCompletion)
4089                    {
4090                         memset(InquiryStandardData, 0,
4091                                 sizeof(DAC960_SCSI_Inquiry_T));
4092                         InquiryStandardData->PeripheralDeviceType = 0x1F;
4093                     }
4094                  else
4095                         memcpy(InquiryStandardData,
4096                                 Controller->V1.NewInquiryStandardData,
4097                                 sizeof(DAC960_SCSI_Inquiry_T));
4098                  Controller->V1.NeedDeviceInquiryInformation = false;
4099               }
4100            else if (Controller->V1.NeedDeviceSerialNumberInformation)
4101               {
4102                 DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
4103                   &Controller->V1.InquiryUnitSerialNumber
4104                                 [Controller->V1.DeviceStateChannel]
4105                                 [Controller->V1.DeviceStateTargetID];
4106                  if (CommandStatus != DAC960_V1_NormalCompletion)
4107                    {
4108                         memset(InquiryUnitSerialNumber, 0,
4109                                 sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
4110                         InquiryUnitSerialNumber->PeripheralDeviceType = 0x1F;
4111                     }
4112                   else
4113                         memcpy(InquiryUnitSerialNumber,
4114                                 Controller->V1.NewInquiryUnitSerialNumber,
4115                                 sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
4116               Controller->V1.NeedDeviceSerialNumberInformation = false;
4117              }
4118         }
4119       /*
4120         Begin submitting new monitoring commands.
4121        */
4122       if (Controller->V1.NewEventLogSequenceNumber
4123           - Controller->V1.OldEventLogSequenceNumber > 0)
4124         {
4125           Command->V1.CommandMailbox.Type3E.CommandOpcode =
4126             DAC960_V1_PerformEventLogOperation;
4127           Command->V1.CommandMailbox.Type3E.OperationType =
4128             DAC960_V1_GetEventLogEntry;
4129           Command->V1.CommandMailbox.Type3E.OperationQualifier = 1;
4130           Command->V1.CommandMailbox.Type3E.SequenceNumber =
4131             Controller->V1.OldEventLogSequenceNumber;
4132           Command->V1.CommandMailbox.Type3E.BusAddress =
4133                 Controller->V1.EventLogEntryDMA;
4134           DAC960_QueueCommand(Command);
4135           return;
4136         }
4137       if (Controller->V1.NeedErrorTableInformation)
4138         {
4139           Controller->V1.NeedErrorTableInformation = false;
4140           Command->V1.CommandMailbox.Type3.CommandOpcode =
4141             DAC960_V1_GetErrorTable;
4142           Command->V1.CommandMailbox.Type3.BusAddress =
4143                 Controller->V1.NewErrorTableDMA;
4144           DAC960_QueueCommand(Command);
4145           return;
4146         }
4147       if (Controller->V1.NeedRebuildProgress &&
4148           Controller->V1.RebuildProgressFirst)
4149         {
4150           Controller->V1.NeedRebuildProgress = false;
4151           Command->V1.CommandMailbox.Type3.CommandOpcode =
4152             DAC960_V1_GetRebuildProgress;
4153           Command->V1.CommandMailbox.Type3.BusAddress =
4154             Controller->V1.RebuildProgressDMA;
4155           DAC960_QueueCommand(Command);
4156           return;
4157         }
4158       if (Controller->V1.NeedDeviceStateInformation)
4159         {
4160           if (Controller->V1.NeedDeviceInquiryInformation)
4161             {
4162               DAC960_V1_DCDB_T *DCDB = Controller->V1.MonitoringDCDB;
4163               dma_addr_t DCDB_DMA = Controller->V1.MonitoringDCDB_DMA;
4164
4165               dma_addr_t NewInquiryStandardDataDMA =
4166                 Controller->V1.NewInquiryStandardDataDMA;
4167
4168               Command->V1.CommandMailbox.Type3.CommandOpcode = DAC960_V1_DCDB;
4169               Command->V1.CommandMailbox.Type3.BusAddress = DCDB_DMA;
4170               DCDB->Channel = Controller->V1.DeviceStateChannel;
4171               DCDB->TargetID = Controller->V1.DeviceStateTargetID;
4172               DCDB->Direction = DAC960_V1_DCDB_DataTransferDeviceToSystem;
4173               DCDB->EarlyStatus = false;
4174               DCDB->Timeout = DAC960_V1_DCDB_Timeout_10_seconds;
4175               DCDB->NoAutomaticRequestSense = false;
4176               DCDB->DisconnectPermitted = true;
4177               DCDB->TransferLength = sizeof(DAC960_SCSI_Inquiry_T);
4178               DCDB->BusAddress = NewInquiryStandardDataDMA;
4179               DCDB->CDBLength = 6;
4180               DCDB->TransferLengthHigh4 = 0;
4181               DCDB->SenseLength = sizeof(DCDB->SenseData);
4182               DCDB->CDB[0] = 0x12; /* INQUIRY */
4183               DCDB->CDB[1] = 0; /* EVPD = 0 */
4184               DCDB->CDB[2] = 0; /* Page Code */
4185               DCDB->CDB[3] = 0; /* Reserved */
4186               DCDB->CDB[4] = sizeof(DAC960_SCSI_Inquiry_T);
4187               DCDB->CDB[5] = 0; /* Control */
4188               DAC960_QueueCommand(Command);
4189               return;
4190             }
4191           if (Controller->V1.NeedDeviceSerialNumberInformation)
4192             {
4193               DAC960_V1_DCDB_T *DCDB = Controller->V1.MonitoringDCDB;
4194               dma_addr_t DCDB_DMA = Controller->V1.MonitoringDCDB_DMA;
4195               dma_addr_t NewInquiryUnitSerialNumberDMA =
4196                         Controller->V1.NewInquiryUnitSerialNumberDMA;
4197
4198               Command->V1.CommandMailbox.Type3.CommandOpcode = DAC960_V1_DCDB;
4199               Command->V1.CommandMailbox.Type3.BusAddress = DCDB_DMA;
4200               DCDB->Channel = Controller->V1.DeviceStateChannel;
4201               DCDB->TargetID = Controller->V1.DeviceStateTargetID;
4202               DCDB->Direction = DAC960_V1_DCDB_DataTransferDeviceToSystem;
4203               DCDB->EarlyStatus = false;
4204               DCDB->Timeout = DAC960_V1_DCDB_Timeout_10_seconds;
4205               DCDB->NoAutomaticRequestSense = false;
4206               DCDB->DisconnectPermitted = true;
4207               DCDB->TransferLength =
4208                 sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T);
4209               DCDB->BusAddress = NewInquiryUnitSerialNumberDMA;
4210               DCDB->CDBLength = 6;
4211               DCDB->TransferLengthHigh4 = 0;
4212               DCDB->SenseLength = sizeof(DCDB->SenseData);
4213               DCDB->CDB[0] = 0x12; /* INQUIRY */
4214               DCDB->CDB[1] = 1; /* EVPD = 1 */
4215               DCDB->CDB[2] = 0x80; /* Page Code */
4216               DCDB->CDB[3] = 0; /* Reserved */
4217               DCDB->CDB[4] = sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T);
4218               DCDB->CDB[5] = 0; /* Control */
4219               DAC960_QueueCommand(Command);
4220               return;
4221             }
4222           if (Controller->V1.StartDeviceStateScan)
4223             {
4224               Controller->V1.DeviceStateChannel = 0;
4225               Controller->V1.DeviceStateTargetID = 0;
4226               Controller->V1.StartDeviceStateScan = false;
4227             }
4228           else if (++Controller->V1.DeviceStateTargetID == Controller->Targets)
4229             {
4230               Controller->V1.DeviceStateChannel++;
4231               Controller->V1.DeviceStateTargetID = 0;
4232             }
4233           if (Controller->V1.DeviceStateChannel < Controller->Channels)
4234             {
4235               Controller->V1.NewDeviceState->DeviceState =
4236                 DAC960_V1_Device_Dead;
4237               Command->V1.CommandMailbox.Type3D.CommandOpcode =
4238                 DAC960_V1_GetDeviceState;
4239               Command->V1.CommandMailbox.Type3D.Channel =
4240                 Controller->V1.DeviceStateChannel;
4241               Command->V1.CommandMailbox.Type3D.TargetID =
4242                 Controller->V1.DeviceStateTargetID;
4243               Command->V1.CommandMailbox.Type3D.BusAddress =
4244                 Controller->V1.NewDeviceStateDMA;
4245               DAC960_QueueCommand(Command);
4246               return;
4247             }
4248           Controller->V1.NeedDeviceStateInformation = false;
4249         }
4250       if (Controller->V1.NeedLogicalDriveInformation)
4251         {
4252           Controller->V1.NeedLogicalDriveInformation = false;
4253           Command->V1.CommandMailbox.Type3.CommandOpcode =
4254             DAC960_V1_GetLogicalDriveInformation;
4255           Command->V1.CommandMailbox.Type3.BusAddress =
4256             Controller->V1.NewLogicalDriveInformationDMA;
4257           DAC960_QueueCommand(Command);
4258           return;
4259         }
4260       if (Controller->V1.NeedRebuildProgress)
4261         {
4262           Controller->V1.NeedRebuildProgress = false;
4263           Command->V1.CommandMailbox.Type3.CommandOpcode =
4264             DAC960_V1_GetRebuildProgress;
4265           Command->V1.CommandMailbox.Type3.BusAddress =
4266                 Controller->V1.RebuildProgressDMA;
4267           DAC960_QueueCommand(Command);
4268           return;
4269         }
4270       if (Controller->V1.NeedConsistencyCheckProgress)
4271         {
4272           Controller->V1.NeedConsistencyCheckProgress = false;
4273           Command->V1.CommandMailbox.Type3.CommandOpcode =
4274             DAC960_V1_RebuildStat;
4275           Command->V1.CommandMailbox.Type3.BusAddress =
4276             Controller->V1.RebuildProgressDMA;
4277           DAC960_QueueCommand(Command);
4278           return;
4279         }
4280       if (Controller->V1.NeedBackgroundInitializationStatus)
4281         {
4282           Controller->V1.NeedBackgroundInitializationStatus = false;
4283           Command->V1.CommandMailbox.Type3B.CommandOpcode =
4284             DAC960_V1_BackgroundInitializationControl;
4285           Command->V1.CommandMailbox.Type3B.CommandOpcode2 = 0x20;
4286           Command->V1.CommandMailbox.Type3B.BusAddress =
4287             Controller->V1.BackgroundInitializationStatusDMA;
4288           DAC960_QueueCommand(Command);
4289           return;
4290         }
4291       Controller->MonitoringTimerCount++;
4292       Controller->MonitoringTimer.expires =
4293         jiffies + DAC960_MonitoringTimerInterval;
4294         add_timer(&Controller->MonitoringTimer);
4295     }
4296   if (CommandType == DAC960_ImmediateCommand)
4297     {
4298       complete(Command->Completion);
4299       Command->Completion = NULL;
4300       return;
4301     }
4302   if (CommandType == DAC960_QueuedCommand)
4303     {
4304       DAC960_V1_KernelCommand_T *KernelCommand = Command->V1.KernelCommand;
4305       KernelCommand->CommandStatus = Command->V1.CommandStatus;
4306       Command->V1.KernelCommand = NULL;
4307       if (CommandOpcode == DAC960_V1_DCDB)
4308         Controller->V1.DirectCommandActive[KernelCommand->DCDB->Channel]
4309                                           [KernelCommand->DCDB->TargetID] =
4310           false;
4311       DAC960_DeallocateCommand(Command);
4312       KernelCommand->CompletionFunction(KernelCommand);
4313       return;
4314     }
4315   /*
4316     Queue a Status Monitoring Command to the Controller using the just
4317     completed Command if one was deferred previously due to lack of a
4318     free Command when the Monitoring Timer Function was called.
4319   */
4320   if (Controller->MonitoringCommandDeferred)
4321     {
4322       Controller->MonitoringCommandDeferred = false;
4323       DAC960_V1_QueueMonitoringCommand(Command);
4324       return;
4325     }
4326   /*
4327     Deallocate the Command.
4328   */
4329   DAC960_DeallocateCommand(Command);
4330   /*
4331     Wake up any processes waiting on a free Command.
4332   */
4333   wake_up(&Controller->CommandWaitQueue);
4334 }
4335
4336
4337 /*
4338   DAC960_V2_ReadWriteError prints an appropriate error message for Command
4339   when an error occurs on a Read or Write operation.
4340 */
4341
4342 static void DAC960_V2_ReadWriteError(DAC960_Command_T *Command)
4343 {
4344   DAC960_Controller_T *Controller = Command->Controller;
4345   unsigned char *SenseErrors[] = { "NO SENSE", "RECOVERED ERROR",
4346                                    "NOT READY", "MEDIUM ERROR",
4347                                    "HARDWARE ERROR", "ILLEGAL REQUEST",
4348                                    "UNIT ATTENTION", "DATA PROTECT",
4349                                    "BLANK CHECK", "VENDOR-SPECIFIC",
4350                                    "COPY ABORTED", "ABORTED COMMAND",
4351                                    "EQUAL", "VOLUME OVERFLOW",
4352                                    "MISCOMPARE", "RESERVED" };
4353   unsigned char *CommandName = "UNKNOWN";
4354   switch (Command->CommandType)
4355     {
4356     case DAC960_ReadCommand:
4357     case DAC960_ReadRetryCommand:
4358       CommandName = "READ";
4359       break;
4360     case DAC960_WriteCommand:
4361     case DAC960_WriteRetryCommand:
4362       CommandName = "WRITE";
4363       break;
4364     case DAC960_MonitoringCommand:
4365     case DAC960_ImmediateCommand:
4366     case DAC960_QueuedCommand:
4367       break;
4368     }
4369   DAC960_Error("Error Condition %s on %s:\n", Controller,
4370                SenseErrors[Command->V2.RequestSense->SenseKey], CommandName);
4371   DAC960_Error("  /dev/rd/c%dd%d:   absolute blocks %u..%u\n",
4372                Controller, Controller->ControllerNumber,
4373                Command->LogicalDriveNumber, Command->BlockNumber,
4374                Command->BlockNumber + Command->BlockCount - 1);
4375 }
4376
4377
4378 /*
4379   DAC960_V2_ReportEvent prints an appropriate message when a Controller Event
4380   occurs.
4381 */
4382
4383 static void DAC960_V2_ReportEvent(DAC960_Controller_T *Controller,
4384                                   DAC960_V2_Event_T *Event)
4385 {
4386   DAC960_SCSI_RequestSense_T *RequestSense =
4387     (DAC960_SCSI_RequestSense_T *) &Event->RequestSenseData;
4388   unsigned char MessageBuffer[DAC960_LineBufferSize];
4389   static struct { int EventCode; unsigned char *EventMessage; } EventList[] =
4390     { /* Physical Device Events (0x0000 - 0x007F) */
4391       { 0x0001, "P Online" },
4392       { 0x0002, "P Standby" },
4393       { 0x0005, "P Automatic Rebuild Started" },
4394       { 0x0006, "P Manual Rebuild Started" },
4395       { 0x0007, "P Rebuild Completed" },
4396       { 0x0008, "P Rebuild Cancelled" },
4397       { 0x0009, "P Rebuild Failed for Unknown Reasons" },
4398       { 0x000A, "P Rebuild Failed due to New Physical Device" },
4399       { 0x000B, "P Rebuild Failed due to Logical Drive Failure" },
4400       { 0x000C, "S Offline" },
4401       { 0x000D, "P Found" },
4402       { 0x000E, "P Removed" },
4403       { 0x000F, "P Unconfigured" },
4404       { 0x0010, "P Expand Capacity Started" },
4405       { 0x0011, "P Expand Capacity Completed" },
4406       { 0x0012, "P Expand Capacity Failed" },
4407       { 0x0013, "P Command Timed Out" },
4408       { 0x0014, "P Command Aborted" },
4409       { 0x0015, "P Command Retried" },
4410       { 0x0016, "P Parity Error" },
4411       { 0x0017, "P Soft Error" },
4412       { 0x0018, "P Miscellaneous Error" },
4413       { 0x0019, "P Reset" },
4414       { 0x001A, "P Active Spare Found" },
4415       { 0x001B, "P Warm Spare Found" },
4416       { 0x001C, "S Sense Data Received" },
4417       { 0x001D, "P Initialization Started" },
4418       { 0x001E, "P Initialization Completed" },
4419       { 0x001F, "P Initialization Failed" },
4420       { 0x0020, "P Initialization Cancelled" },
4421       { 0x0021, "P Failed because Write Recovery Failed" },
4422       { 0x0022, "P Failed because SCSI Bus Reset Failed" },
4423       { 0x0023, "P Failed because of Double Check Condition" },
4424       { 0x0024, "P Failed because Device Cannot Be Accessed" },
4425       { 0x0025, "P Failed because of Gross Error on SCSI Processor" },
4426       { 0x0026, "P Failed because of Bad Tag from Device" },
4427       { 0x0027, "P Failed because of Command Timeout" },
4428       { 0x0028, "P Failed because of System Reset" },
4429       { 0x0029, "P Failed because of Busy Status or Parity Error" },
4430       { 0x002A, "P Failed because Host Set Device to Failed State" },
4431       { 0x002B, "P Failed because of Selection Timeout" },
4432       { 0x002C, "P Failed because of SCSI Bus Phase Error" },
4433       { 0x002D, "P Failed because Device Returned Unknown Status" },
4434       { 0x002E, "P Failed because Device Not Ready" },
4435       { 0x002F, "P Failed because Device Not Found at Startup" },
4436       { 0x0030, "P Failed because COD Write Operation Failed" },
4437       { 0x0031, "P Failed because BDT Write Operation Failed" },
4438       { 0x0039, "P Missing at Startup" },
4439       { 0x003A, "P Start Rebuild Failed due to Physical Drive Too Small" },
4440       { 0x003C, "P Temporarily Offline Device Automatically Made Online" },
4441       { 0x003D, "P Standby Rebuild Started" },
4442       /* Logical Device Events (0x0080 - 0x00FF) */
4443       { 0x0080, "M Consistency Check Started" },
4444       { 0x0081, "M Consistency Check Completed" },
4445       { 0x0082, "M Consistency Check Cancelled" },
4446       { 0x0083, "M Consistency Check Completed With Errors" },
4447       { 0x0084, "M Consistency Check Failed due to Logical Drive Failure" },
4448       { 0x0085, "M Consistency Check Failed due to Physical Device Failure" },
4449       { 0x0086, "L Offline" },
4450       { 0x0087, "L Critical" },
4451       { 0x0088, "L Online" },
4452       { 0x0089, "M Automatic Rebuild Started" },
4453       { 0x008A, "M Manual Rebuild Started" },
4454       { 0x008B, "M Rebuild Completed" },
4455       { 0x008C, "M Rebuild Cancelled" },
4456       { 0x008D, "M Rebuild Failed for Unknown Reasons" },
4457       { 0x008E, "M Rebuild Failed due to New Physical Device" },
4458       { 0x008F, "M Rebuild Failed due to Logical Drive Failure" },
4459       { 0x0090, "M Initialization Started" },
4460       { 0x0091, "M Initialization Completed" },
4461       { 0x0092, "M Initialization Cancelled" },
4462       { 0x0093, "M Initialization Failed" },
4463       { 0x0094, "L Found" },
4464       { 0x0095, "L Deleted" },
4465       { 0x0096, "M Expand Capacity Started" },
4466       { 0x0097, "M Expand Capacity Completed" },
4467       { 0x0098, "M Expand Capacity Failed" },
4468       { 0x0099, "L Bad Block Found" },
4469       { 0x009A, "L Size Changed" },
4470       { 0x009B, "L Type Changed" },
4471       { 0x009C, "L Bad Data Block Found" },
4472       { 0x009E, "L Read of Data Block in BDT" },
4473       { 0x009F, "L Write Back Data for Disk Block Lost" },
4474       { 0x00A0, "L Temporarily Offline RAID-5/3 Drive Made Online" },
4475       { 0x00A1, "L Temporarily Offline RAID-6/1/0/7 Drive Made Online" },
4476       { 0x00A2, "L Standby Rebuild Started" },
4477       /* Fault Management Events (0x0100 - 0x017F) */
4478       { 0x0140, "E Fan %d Failed" },
4479       { 0x0141, "E Fan %d OK" },
4480       { 0x0142, "E Fan %d Not Present" },
4481       { 0x0143, "E Power Supply %d Failed" },
4482       { 0x0144, "E Power Supply %d OK" },
4483       { 0x0145, "E Power Supply %d Not Present" },
4484       { 0x0146, "E Temperature Sensor %d Temperature Exceeds Safe Limit" },
4485       { 0x0147, "E Temperature Sensor %d Temperature Exceeds Working Limit" },
4486       { 0x0148, "E Temperature Sensor %d Temperature Normal" },
4487       { 0x0149, "E Temperature Sensor %d Not Present" },
4488       { 0x014A, "E Enclosure Management Unit %d Access Critical" },
4489       { 0x014B, "E Enclosure Management Unit %d Access OK" },
4490       { 0x014C, "E Enclosure Management Unit %d Access Offline" },
4491       /* Controller Events (0x0180 - 0x01FF) */
4492       { 0x0181, "C Cache Write Back Error" },
4493       { 0x0188, "C Battery Backup Unit Found" },
4494       { 0x0189, "C Battery Backup Unit Charge Level Low" },
4495       { 0x018A, "C Battery Backup Unit Charge Level OK" },
4496       { 0x0193, "C Installation Aborted" },
4497       { 0x0195, "C Battery Backup Unit Physically Removed" },
4498       { 0x0196, "C Memory Error During Warm Boot" },
4499       { 0x019E, "C Memory Soft ECC Error Corrected" },
4500       { 0x019F, "C Memory Hard ECC Error Corrected" },
4501       { 0x01A2, "C Battery Backup Unit Failed" },
4502       { 0x01AB, "C Mirror Race Recovery Failed" },
4503       { 0x01AC, "C Mirror Race on Critical Drive" },
4504       /* Controller Internal Processor Events */
4505       { 0x0380, "C Internal Controller Hung" },
4506       { 0x0381, "C Internal Controller Firmware Breakpoint" },
4507       { 0x0390, "C Internal Controller i960 Processor Specific Error" },
4508       { 0x03A0, "C Internal Controller StrongARM Processor Specific Error" },
4509       { 0, "" } };
4510   int EventListIndex = 0, EventCode;
4511   unsigned char EventType, *EventMessage;
4512   if (Event->EventCode == 0x1C &&
4513       RequestSense->SenseKey == DAC960_SenseKey_VendorSpecific &&
4514       (RequestSense->AdditionalSenseCode == 0x80 ||
4515        RequestSense->AdditionalSenseCode == 0x81))
4516     Event->EventCode = ((RequestSense->AdditionalSenseCode - 0x80) << 8) |
4517                        RequestSense->AdditionalSenseCodeQualifier;
4518   while (true)
4519     {
4520       EventCode = EventList[EventListIndex].EventCode;
4521       if (EventCode == Event->EventCode || EventCode == 0) break;
4522       EventListIndex++;
4523     }
4524   EventType = EventList[EventListIndex].EventMessage[0];
4525   EventMessage = &EventList[EventListIndex].EventMessage[2];
4526   if (EventCode == 0)
4527     {
4528       DAC960_Critical("Unknown Controller Event Code %04X\n",
4529                       Controller, Event->EventCode);
4530       return;
4531     }
4532   switch (EventType)
4533     {
4534     case 'P':
4535       DAC960_Critical("Physical Device %d:%d %s\n", Controller,
4536                       Event->Channel, Event->TargetID, EventMessage);
4537       break;
4538     case 'L':
4539       DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) %s\n", Controller,
4540                       Event->LogicalUnit, Controller->ControllerNumber,
4541                       Event->LogicalUnit, EventMessage);
4542       break;
4543     case 'M':
4544       DAC960_Progress("Logical Drive %d (/dev/rd/c%dd%d) %s\n", Controller,
4545                       Event->LogicalUnit, Controller->ControllerNumber,
4546                       Event->LogicalUnit, EventMessage);
4547       break;
4548     case 'S':
4549       if (RequestSense->SenseKey == DAC960_SenseKey_NoSense ||
4550           (RequestSense->SenseKey == DAC960_SenseKey_NotReady &&
4551            RequestSense->AdditionalSenseCode == 0x04 &&
4552            (RequestSense->AdditionalSenseCodeQualifier == 0x01 ||
4553             RequestSense->AdditionalSenseCodeQualifier == 0x02)))
4554         break;
4555       DAC960_Critical("Physical Device %d:%d %s\n", Controller,
4556                       Event->Channel, Event->TargetID, EventMessage);
4557       DAC960_Critical("Physical Device %d:%d Request Sense: "
4558                       "Sense Key = %X, ASC = %02X, ASCQ = %02X\n",
4559                       Controller,
4560                       Event->Channel,
4561                       Event->TargetID,
4562                       RequestSense->SenseKey,
4563                       RequestSense->AdditionalSenseCode,
4564                       RequestSense->AdditionalSenseCodeQualifier);
4565       DAC960_Critical("Physical Device %d:%d Request Sense: "
4566                       "Information = %02X%02X%02X%02X "
4567                       "%02X%02X%02X%02X\n",
4568                       Controller,
4569                       Event->Channel,
4570                       Event->TargetID,
4571                       RequestSense->Information[0],
4572                       RequestSense->Information[1],
4573                       RequestSense->Information[2],
4574                       RequestSense->Information[3],
4575                       RequestSense->CommandSpecificInformation[0],
4576                       RequestSense->CommandSpecificInformation[1],
4577                       RequestSense->CommandSpecificInformation[2],
4578                       RequestSense->CommandSpecificInformation[3]);
4579       break;
4580     case 'E':
4581       if (Controller->SuppressEnclosureMessages) break;
4582       sprintf(MessageBuffer, EventMessage, Event->LogicalUnit);
4583       DAC960_Critical("Enclosure %d %s\n", Controller,
4584                       Event->TargetID, MessageBuffer);
4585       break;
4586     case 'C':
4587       DAC960_Critical("Controller %s\n", Controller, EventMessage);
4588       break;
4589     default:
4590       DAC960_Critical("Unknown Controller Event Code %04X\n",
4591                       Controller, Event->EventCode);
4592       break;
4593     }
4594 }
4595
4596
4597 /*
4598   DAC960_V2_ReportProgress prints an appropriate progress message for
4599   Logical Device Long Operations.
4600 */
4601
4602 static void DAC960_V2_ReportProgress(DAC960_Controller_T *Controller,
4603                                      unsigned char *MessageString,
4604                                      unsigned int LogicalDeviceNumber,
4605                                      unsigned long BlocksCompleted,
4606                                      unsigned long LogicalDeviceSize)
4607 {
4608   Controller->EphemeralProgressMessage = true;
4609   DAC960_Progress("%s in Progress: Logical Drive %d (/dev/rd/c%dd%d) "
4610                   "%d%% completed\n", Controller,
4611                   MessageString,
4612                   LogicalDeviceNumber,
4613                   Controller->ControllerNumber,
4614                   LogicalDeviceNumber,
4615                   (100 * (BlocksCompleted >> 7)) / (LogicalDeviceSize >> 7));
4616   Controller->EphemeralProgressMessage = false;
4617 }
4618
4619
4620 /*
4621   DAC960_V2_ProcessCompletedCommand performs completion processing for Command
4622   for DAC960 V2 Firmware Controllers.
4623 */
4624
4625 static void DAC960_V2_ProcessCompletedCommand(DAC960_Command_T *Command)
4626 {
4627   DAC960_Controller_T *Controller = Command->Controller;
4628   DAC960_CommandType_T CommandType = Command->CommandType;
4629   DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
4630   DAC960_V2_IOCTL_Opcode_T CommandOpcode = CommandMailbox->Common.IOCTL_Opcode;
4631   DAC960_V2_CommandStatus_T CommandStatus = Command->V2.CommandStatus;
4632
4633   if (CommandType == DAC960_ReadCommand ||
4634       CommandType == DAC960_WriteCommand)
4635     {
4636
4637 #ifdef FORCE_RETRY_DEBUG
4638       CommandStatus = DAC960_V2_AbormalCompletion;
4639 #endif
4640       Command->V2.RequestSense->SenseKey = DAC960_SenseKey_MediumError;
4641
4642       if (CommandStatus == DAC960_V2_NormalCompletion) {
4643
4644                 if (!DAC960_ProcessCompletedRequest(Command, true))
4645                         BUG();
4646
4647       } else if (Command->V2.RequestSense->SenseKey == DAC960_SenseKey_MediumError)
4648         {
4649           /*
4650            * break the command down into pieces and resubmit each
4651            * piece, hoping that some of them will succeed.
4652            */
4653            DAC960_queue_partial_rw(Command);
4654            return;
4655         }
4656       else
4657         {
4658           if (Command->V2.RequestSense->SenseKey != DAC960_SenseKey_NotReady)
4659             DAC960_V2_ReadWriteError(Command);
4660           /*
4661             Perform completion processing for all buffers in this I/O Request.
4662           */
4663           (void)DAC960_ProcessCompletedRequest(Command, false);
4664         }
4665     }
4666   else if (CommandType == DAC960_ReadRetryCommand ||
4667            CommandType == DAC960_WriteRetryCommand)
4668     {
4669       bool normal_completion;
4670
4671 #ifdef FORCE_RETRY_FAILURE_DEBUG
4672       static int retry_count = 1;
4673 #endif
4674       /*
4675         Perform completion processing for the portion that was
4676         retried, and submit the next portion, if any.
4677       */
4678       normal_completion = true;
4679       if (CommandStatus != DAC960_V2_NormalCompletion) {
4680         normal_completion = false;
4681         if (Command->V2.RequestSense->SenseKey != DAC960_SenseKey_NotReady)
4682             DAC960_V2_ReadWriteError(Command);
4683       }
4684
4685 #ifdef FORCE_RETRY_FAILURE_DEBUG
4686       if (!(++retry_count % 10000)) {
4687               printk("V2 error retry failure test\n");
4688               normal_completion = false;
4689               DAC960_V2_ReadWriteError(Command);
4690       }
4691 #endif
4692
4693       if (!DAC960_ProcessCompletedRequest(Command, normal_completion)) {
4694                 DAC960_queue_partial_rw(Command);
4695                 return;
4696       }
4697     }
4698   else if (CommandType == DAC960_MonitoringCommand)
4699     {
4700       if (Controller->ShutdownMonitoringTimer)
4701               return;
4702       if (CommandOpcode == DAC960_V2_GetControllerInfo)
4703         {
4704           DAC960_V2_ControllerInfo_T *NewControllerInfo =
4705             Controller->V2.NewControllerInformation;
4706           DAC960_V2_ControllerInfo_T *ControllerInfo =
4707             &Controller->V2.ControllerInformation;
4708           Controller->LogicalDriveCount =
4709             NewControllerInfo->LogicalDevicesPresent;
4710           Controller->V2.NeedLogicalDeviceInformation = true;
4711           Controller->V2.NeedPhysicalDeviceInformation = true;
4712           Controller->V2.StartLogicalDeviceInformationScan = true;
4713           Controller->V2.StartPhysicalDeviceInformationScan = true;
4714           Controller->MonitoringAlertMode =
4715             (NewControllerInfo->LogicalDevicesCritical > 0 ||
4716              NewControllerInfo->LogicalDevicesOffline > 0 ||
4717              NewControllerInfo->PhysicalDisksCritical > 0 ||
4718              NewControllerInfo->PhysicalDisksOffline > 0);
4719           memcpy(ControllerInfo, NewControllerInfo,
4720                  sizeof(DAC960_V2_ControllerInfo_T));
4721         }
4722       else if (CommandOpcode == DAC960_V2_GetEvent)
4723         {
4724           if (CommandStatus == DAC960_V2_NormalCompletion) {
4725             DAC960_V2_ReportEvent(Controller, Controller->V2.Event);
4726           }
4727           Controller->V2.NextEventSequenceNumber++;
4728         }
4729       else if (CommandOpcode == DAC960_V2_GetPhysicalDeviceInfoValid &&
4730                CommandStatus == DAC960_V2_NormalCompletion)
4731         {
4732           DAC960_V2_PhysicalDeviceInfo_T *NewPhysicalDeviceInfo =
4733             Controller->V2.NewPhysicalDeviceInformation;
4734           unsigned int PhysicalDeviceIndex = Controller->V2.PhysicalDeviceIndex;
4735           DAC960_V2_PhysicalDeviceInfo_T *PhysicalDeviceInfo =
4736             Controller->V2.PhysicalDeviceInformation[PhysicalDeviceIndex];
4737           DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
4738             Controller->V2.InquiryUnitSerialNumber[PhysicalDeviceIndex];
4739           unsigned int DeviceIndex;
4740           while (PhysicalDeviceInfo != NULL &&
4741                  (NewPhysicalDeviceInfo->Channel >
4742                   PhysicalDeviceInfo->Channel ||
4743                   (NewPhysicalDeviceInfo->Channel ==
4744                    PhysicalDeviceInfo->Channel &&
4745                    (NewPhysicalDeviceInfo->TargetID >
4746                     PhysicalDeviceInfo->TargetID ||
4747                    (NewPhysicalDeviceInfo->TargetID ==
4748                     PhysicalDeviceInfo->TargetID &&
4749                     NewPhysicalDeviceInfo->LogicalUnit >
4750                     PhysicalDeviceInfo->LogicalUnit)))))
4751             {
4752               DAC960_Critical("Physical Device %d:%d No Longer Exists\n",
4753                               Controller,
4754                               PhysicalDeviceInfo->Channel,
4755                               PhysicalDeviceInfo->TargetID);
4756               Controller->V2.PhysicalDeviceInformation
4757                              [PhysicalDeviceIndex] = NULL;
4758               Controller->V2.InquiryUnitSerialNumber
4759                              [PhysicalDeviceIndex] = NULL;
4760               kfree(PhysicalDeviceInfo);
4761               kfree(InquiryUnitSerialNumber);
4762               for (DeviceIndex = PhysicalDeviceIndex;
4763                    DeviceIndex < DAC960_V2_MaxPhysicalDevices - 1;
4764                    DeviceIndex++)
4765                 {
4766                   Controller->V2.PhysicalDeviceInformation[DeviceIndex] =
4767                     Controller->V2.PhysicalDeviceInformation[DeviceIndex+1];
4768                   Controller->V2.InquiryUnitSerialNumber[DeviceIndex] =
4769                     Controller->V2.InquiryUnitSerialNumber[DeviceIndex+1];
4770                 }
4771               Controller->V2.PhysicalDeviceInformation
4772                              [DAC960_V2_MaxPhysicalDevices-1] = NULL;
4773               Controller->V2.InquiryUnitSerialNumber
4774                              [DAC960_V2_MaxPhysicalDevices-1] = NULL;
4775               PhysicalDeviceInfo =
4776                 Controller->V2.PhysicalDeviceInformation[PhysicalDeviceIndex];
4777               InquiryUnitSerialNumber =
4778                 Controller->V2.InquiryUnitSerialNumber[PhysicalDeviceIndex];
4779             }
4780           if (PhysicalDeviceInfo == NULL ||
4781               (NewPhysicalDeviceInfo->Channel !=
4782                PhysicalDeviceInfo->Channel) ||
4783               (NewPhysicalDeviceInfo->TargetID !=
4784                PhysicalDeviceInfo->TargetID) ||
4785               (NewPhysicalDeviceInfo->LogicalUnit !=
4786                PhysicalDeviceInfo->LogicalUnit))
4787             {
4788               PhysicalDeviceInfo =
4789                 kmalloc(sizeof(DAC960_V2_PhysicalDeviceInfo_T), GFP_ATOMIC);
4790               InquiryUnitSerialNumber =
4791                   kmalloc(sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T),
4792                           GFP_ATOMIC);
4793               if (InquiryUnitSerialNumber == NULL ||
4794                   PhysicalDeviceInfo == NULL)
4795                 {
4796                   kfree(InquiryUnitSerialNumber);
4797                   InquiryUnitSerialNumber = NULL;
4798                   kfree(PhysicalDeviceInfo);
4799                   PhysicalDeviceInfo = NULL;
4800                 }
4801               DAC960_Critical("Physical Device %d:%d Now Exists%s\n",
4802                               Controller,
4803                               NewPhysicalDeviceInfo->Channel,
4804                               NewPhysicalDeviceInfo->TargetID,
4805                               (PhysicalDeviceInfo != NULL
4806                                ? "" : " - Allocation Failed"));
4807               if (PhysicalDeviceInfo != NULL)
4808                 {
4809                   memset(PhysicalDeviceInfo, 0,
4810                          sizeof(DAC960_V2_PhysicalDeviceInfo_T));
4811                   PhysicalDeviceInfo->PhysicalDeviceState =
4812                     DAC960_V2_Device_InvalidState;
4813                   memset(InquiryUnitSerialNumber, 0,
4814                          sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
4815                   InquiryUnitSerialNumber->PeripheralDeviceType = 0x1F;
4816                   for (DeviceIndex = DAC960_V2_MaxPhysicalDevices - 1;
4817                        DeviceIndex > PhysicalDeviceIndex;
4818                        DeviceIndex--)
4819                     {
4820                       Controller->V2.PhysicalDeviceInformation[DeviceIndex] =
4821                         Controller->V2.PhysicalDeviceInformation[DeviceIndex-1];
4822                       Controller->V2.InquiryUnitSerialNumber[DeviceIndex] =
4823                         Controller->V2.InquiryUnitSerialNumber[DeviceIndex-1];
4824                     }
4825                   Controller->V2.PhysicalDeviceInformation
4826                                  [PhysicalDeviceIndex] =
4827                     PhysicalDeviceInfo;
4828                   Controller->V2.InquiryUnitSerialNumber
4829                                  [PhysicalDeviceIndex] =
4830                     InquiryUnitSerialNumber;
4831                   Controller->V2.NeedDeviceSerialNumberInformation = true;
4832                 }
4833             }
4834           if (PhysicalDeviceInfo != NULL)
4835             {
4836               if (NewPhysicalDeviceInfo->PhysicalDeviceState !=
4837                   PhysicalDeviceInfo->PhysicalDeviceState)
4838                 DAC960_Critical(
4839                   "Physical Device %d:%d is now %s\n", Controller,
4840                   NewPhysicalDeviceInfo->Channel,
4841                   NewPhysicalDeviceInfo->TargetID,
4842                   (NewPhysicalDeviceInfo->PhysicalDeviceState
4843                    == DAC960_V2_Device_Online
4844                    ? "ONLINE"
4845                    : NewPhysicalDeviceInfo->PhysicalDeviceState
4846                      == DAC960_V2_Device_Rebuild
4847                      ? "REBUILD"
4848                      : NewPhysicalDeviceInfo->PhysicalDeviceState
4849                        == DAC960_V2_Device_Missing
4850                        ? "MISSING"
4851                        : NewPhysicalDeviceInfo->PhysicalDeviceState
4852                          == DAC960_V2_Device_Critical
4853                          ? "CRITICAL"
4854                          : NewPhysicalDeviceInfo->PhysicalDeviceState
4855                            == DAC960_V2_Device_Dead
4856                            ? "DEAD"
4857                            : NewPhysicalDeviceInfo->PhysicalDeviceState
4858                              == DAC960_V2_Device_SuspectedDead
4859                              ? "SUSPECTED-DEAD"
4860                              : NewPhysicalDeviceInfo->PhysicalDeviceState
4861                                == DAC960_V2_Device_CommandedOffline
4862                                ? "COMMANDED-OFFLINE"
4863                                : NewPhysicalDeviceInfo->PhysicalDeviceState
4864                                  == DAC960_V2_Device_Standby
4865                                  ? "STANDBY" : "UNKNOWN"));
4866               if ((NewPhysicalDeviceInfo->ParityErrors !=
4867                    PhysicalDeviceInfo->ParityErrors) ||
4868                   (NewPhysicalDeviceInfo->SoftErrors !=
4869                    PhysicalDeviceInfo->SoftErrors) ||
4870                   (NewPhysicalDeviceInfo->HardErrors !=
4871                    PhysicalDeviceInfo->HardErrors) ||
4872                   (NewPhysicalDeviceInfo->MiscellaneousErrors !=
4873                    PhysicalDeviceInfo->MiscellaneousErrors) ||
4874                   (NewPhysicalDeviceInfo->CommandTimeouts !=
4875                    PhysicalDeviceInfo->CommandTimeouts) ||
4876                   (NewPhysicalDeviceInfo->Retries !=
4877                    PhysicalDeviceInfo->Retries) ||
4878                   (NewPhysicalDeviceInfo->Aborts !=
4879                    PhysicalDeviceInfo->Aborts) ||
4880                   (NewPhysicalDeviceInfo->PredictedFailuresDetected !=
4881                    PhysicalDeviceInfo->PredictedFailuresDetected))
4882                 {
4883                   DAC960_Critical("Physical Device %d:%d Errors: "
4884                                   "Parity = %d, Soft = %d, "
4885                                   "Hard = %d, Misc = %d\n",
4886                                   Controller,
4887                                   NewPhysicalDeviceInfo->Channel,
4888                                   NewPhysicalDeviceInfo->TargetID,
4889                                   NewPhysicalDeviceInfo->ParityErrors,
4890                                   NewPhysicalDeviceInfo->SoftErrors,
4891                                   NewPhysicalDeviceInfo->HardErrors,
4892                                   NewPhysicalDeviceInfo->MiscellaneousErrors);
4893                   DAC960_Critical("Physical Device %d:%d Errors: "
4894                                   "Timeouts = %d, Retries = %d, "
4895                                   "Aborts = %d, Predicted = %d\n",
4896                                   Controller,
4897                                   NewPhysicalDeviceInfo->Channel,
4898                                   NewPhysicalDeviceInfo->TargetID,
4899                                   NewPhysicalDeviceInfo->CommandTimeouts,
4900                                   NewPhysicalDeviceInfo->Retries,
4901                                   NewPhysicalDeviceInfo->Aborts,
4902                                   NewPhysicalDeviceInfo
4903                                   ->PredictedFailuresDetected);
4904                 }
4905               if ((PhysicalDeviceInfo->PhysicalDeviceState
4906                    == DAC960_V2_Device_Dead ||
4907                    PhysicalDeviceInfo->PhysicalDeviceState
4908                    == DAC960_V2_Device_InvalidState) &&
4909                   NewPhysicalDeviceInfo->PhysicalDeviceState
4910                   != DAC960_V2_Device_Dead)
4911                 Controller->V2.NeedDeviceSerialNumberInformation = true;
4912               memcpy(PhysicalDeviceInfo, NewPhysicalDeviceInfo,
4913                      sizeof(DAC960_V2_PhysicalDeviceInfo_T));
4914             }
4915           NewPhysicalDeviceInfo->LogicalUnit++;
4916           Controller->V2.PhysicalDeviceIndex++;
4917         }
4918       else if (CommandOpcode == DAC960_V2_GetPhysicalDeviceInfoValid)
4919         {
4920           unsigned int DeviceIndex;
4921           for (DeviceIndex = Controller->V2.PhysicalDeviceIndex;
4922                DeviceIndex < DAC960_V2_MaxPhysicalDevices;
4923                DeviceIndex++)
4924             {
4925               DAC960_V2_PhysicalDeviceInfo_T *PhysicalDeviceInfo =
4926                 Controller->V2.PhysicalDeviceInformation[DeviceIndex];
4927               DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
4928                 Controller->V2.InquiryUnitSerialNumber[DeviceIndex];
4929               if (PhysicalDeviceInfo == NULL) break;
4930               DAC960_Critical("Physical Device %d:%d No Longer Exists\n",
4931                               Controller,
4932                               PhysicalDeviceInfo->Channel,
4933                               PhysicalDeviceInfo->TargetID);
4934               Controller->V2.PhysicalDeviceInformation[DeviceIndex] = NULL;
4935               Controller->V2.InquiryUnitSerialNumber[DeviceIndex] = NULL;
4936               kfree(PhysicalDeviceInfo);
4937               kfree(InquiryUnitSerialNumber);
4938             }
4939           Controller->V2.NeedPhysicalDeviceInformation = false;
4940         }
4941       else if (CommandOpcode == DAC960_V2_GetLogicalDeviceInfoValid &&
4942                CommandStatus == DAC960_V2_NormalCompletion)
4943         {
4944           DAC960_V2_LogicalDeviceInfo_T *NewLogicalDeviceInfo =
4945             Controller->V2.NewLogicalDeviceInformation;
4946           unsigned short LogicalDeviceNumber =
4947             NewLogicalDeviceInfo->LogicalDeviceNumber;
4948           DAC960_V2_LogicalDeviceInfo_T *LogicalDeviceInfo =
4949             Controller->V2.LogicalDeviceInformation[LogicalDeviceNumber];
4950           if (LogicalDeviceInfo == NULL)
4951             {
4952               DAC960_V2_PhysicalDevice_T PhysicalDevice;
4953               PhysicalDevice.Controller = 0;
4954               PhysicalDevice.Channel = NewLogicalDeviceInfo->Channel;
4955               PhysicalDevice.TargetID = NewLogicalDeviceInfo->TargetID;
4956               PhysicalDevice.LogicalUnit = NewLogicalDeviceInfo->LogicalUnit;
4957               Controller->V2.LogicalDriveToVirtualDevice[LogicalDeviceNumber] =
4958                 PhysicalDevice;
4959               LogicalDeviceInfo = kmalloc(sizeof(DAC960_V2_LogicalDeviceInfo_T),
4960                                           GFP_ATOMIC);
4961               Controller->V2.LogicalDeviceInformation[LogicalDeviceNumber] =
4962                 LogicalDeviceInfo;
4963               DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) "
4964                               "Now Exists%s\n", Controller,
4965                               LogicalDeviceNumber,
4966                               Controller->ControllerNumber,
4967                               LogicalDeviceNumber,
4968                               (LogicalDeviceInfo != NULL
4969                                ? "" : " - Allocation Failed"));
4970               if (LogicalDeviceInfo != NULL)
4971                 {
4972                   memset(LogicalDeviceInfo, 0,
4973                          sizeof(DAC960_V2_LogicalDeviceInfo_T));
4974                   DAC960_ComputeGenericDiskInfo(Controller);
4975                 }
4976             }
4977           if (LogicalDeviceInfo != NULL)
4978             {
4979               unsigned long LogicalDeviceSize =
4980                 NewLogicalDeviceInfo->ConfigurableDeviceSize;
4981               if (NewLogicalDeviceInfo->LogicalDeviceState !=
4982                   LogicalDeviceInfo->LogicalDeviceState)
4983                 DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) "
4984                                 "is now %s\n", Controller,
4985                                 LogicalDeviceNumber,
4986                                 Controller->ControllerNumber,
4987                                 LogicalDeviceNumber,
4988                                 (NewLogicalDeviceInfo->LogicalDeviceState
4989                                  == DAC960_V2_LogicalDevice_Online
4990                                  ? "ONLINE"
4991                                  : NewLogicalDeviceInfo->LogicalDeviceState
4992                                    == DAC960_V2_LogicalDevice_Critical
4993                                    ? "CRITICAL" : "OFFLINE"));
4994               if ((NewLogicalDeviceInfo->SoftErrors !=
4995                    LogicalDeviceInfo->SoftErrors) ||
4996                   (NewLogicalDeviceInfo->CommandsFailed !=
4997                    LogicalDeviceInfo->CommandsFailed) ||
4998                   (NewLogicalDeviceInfo->DeferredWriteErrors !=
4999                    LogicalDeviceInfo->DeferredWriteErrors))
5000                 DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) Errors: "
5001                                 "Soft = %d, Failed = %d, Deferred Write = %d\n",
5002                                 Controller, LogicalDeviceNumber,
5003                                 Controller->ControllerNumber,
5004                                 LogicalDeviceNumber,
5005                                 NewLogicalDeviceInfo->SoftErrors,
5006                                 NewLogicalDeviceInfo->CommandsFailed,
5007                                 NewLogicalDeviceInfo->DeferredWriteErrors);
5008               if (NewLogicalDeviceInfo->ConsistencyCheckInProgress)
5009                 DAC960_V2_ReportProgress(Controller,
5010                                          "Consistency Check",
5011                                          LogicalDeviceNumber,
5012                                          NewLogicalDeviceInfo
5013                                          ->ConsistencyCheckBlockNumber,
5014                                          LogicalDeviceSize);
5015               else if (NewLogicalDeviceInfo->RebuildInProgress)
5016                 DAC960_V2_ReportProgress(Controller,
5017                                          "Rebuild",
5018                                          LogicalDeviceNumber,
5019                                          NewLogicalDeviceInfo
5020                                          ->RebuildBlockNumber,
5021                                          LogicalDeviceSize);
5022               else if (NewLogicalDeviceInfo->BackgroundInitializationInProgress)
5023                 DAC960_V2_ReportProgress(Controller,
5024                                          "Background Initialization",
5025                                          LogicalDeviceNumber,
5026                                          NewLogicalDeviceInfo
5027                                          ->BackgroundInitializationBlockNumber,
5028                                          LogicalDeviceSize);
5029               else if (NewLogicalDeviceInfo->ForegroundInitializationInProgress)
5030                 DAC960_V2_ReportProgress(Controller,
5031                                          "Foreground Initialization",
5032                                          LogicalDeviceNumber,
5033                                          NewLogicalDeviceInfo
5034                                          ->ForegroundInitializationBlockNumber,
5035                                          LogicalDeviceSize);
5036               else if (NewLogicalDeviceInfo->DataMigrationInProgress)
5037                 DAC960_V2_ReportProgress(Controller,
5038                                          "Data Migration",
5039                                          LogicalDeviceNumber,
5040                                          NewLogicalDeviceInfo
5041                                          ->DataMigrationBlockNumber,
5042                                          LogicalDeviceSize);
5043               else if (NewLogicalDeviceInfo->PatrolOperationInProgress)
5044                 DAC960_V2_ReportProgress(Controller,
5045                                          "Patrol Operation",
5046                                          LogicalDeviceNumber,
5047                                          NewLogicalDeviceInfo
5048                                          ->PatrolOperationBlockNumber,
5049                                          LogicalDeviceSize);
5050               if (LogicalDeviceInfo->BackgroundInitializationInProgress &&
5051                   !NewLogicalDeviceInfo->BackgroundInitializationInProgress)
5052                 DAC960_Progress("Logical Drive %d (/dev/rd/c%dd%d) "
5053                                 "Background Initialization %s\n",
5054                                 Controller,
5055                                 LogicalDeviceNumber,
5056                                 Controller->ControllerNumber,
5057                                 LogicalDeviceNumber,
5058                                 (NewLogicalDeviceInfo->LogicalDeviceControl
5059                                                       .LogicalDeviceInitialized
5060                                  ? "Completed" : "Failed"));
5061               memcpy(LogicalDeviceInfo, NewLogicalDeviceInfo,
5062                      sizeof(DAC960_V2_LogicalDeviceInfo_T));
5063             }
5064           Controller->V2.LogicalDriveFoundDuringScan
5065                          [LogicalDeviceNumber] = true;
5066           NewLogicalDeviceInfo->LogicalDeviceNumber++;
5067         }
5068       else if (CommandOpcode == DAC960_V2_GetLogicalDeviceInfoValid)
5069         {
5070           int LogicalDriveNumber;
5071           for (LogicalDriveNumber = 0;
5072                LogicalDriveNumber < DAC960_MaxLogicalDrives;
5073                LogicalDriveNumber++)
5074             {
5075               DAC960_V2_LogicalDeviceInfo_T *LogicalDeviceInfo =
5076                 Controller->V2.LogicalDeviceInformation[LogicalDriveNumber];
5077               if (LogicalDeviceInfo == NULL ||
5078                   Controller->V2.LogicalDriveFoundDuringScan
5079                                  [LogicalDriveNumber])
5080                 continue;
5081               DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) "
5082                               "No Longer Exists\n", Controller,
5083                               LogicalDriveNumber,
5084                               Controller->ControllerNumber,
5085                               LogicalDriveNumber);
5086               Controller->V2.LogicalDeviceInformation
5087                              [LogicalDriveNumber] = NULL;
5088               kfree(LogicalDeviceInfo);
5089               Controller->LogicalDriveInitiallyAccessible
5090                           [LogicalDriveNumber] = false;
5091               DAC960_ComputeGenericDiskInfo(Controller);
5092             }
5093           Controller->V2.NeedLogicalDeviceInformation = false;
5094         }
5095       else if (CommandOpcode == DAC960_V2_SCSI_10_Passthru)
5096         {
5097             DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
5098                 Controller->V2.InquiryUnitSerialNumber[Controller->V2.PhysicalDeviceIndex - 1];
5099
5100             if (CommandStatus != DAC960_V2_NormalCompletion) {
5101                 memset(InquiryUnitSerialNumber,
5102                         0, sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
5103                 InquiryUnitSerialNumber->PeripheralDeviceType = 0x1F;
5104             } else
5105                 memcpy(InquiryUnitSerialNumber,
5106                         Controller->V2.NewInquiryUnitSerialNumber,
5107                         sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
5108
5109              Controller->V2.NeedDeviceSerialNumberInformation = false;
5110         }
5111
5112       if (Controller->V2.HealthStatusBuffer->NextEventSequenceNumber
5113           - Controller->V2.NextEventSequenceNumber > 0)
5114         {
5115           CommandMailbox->GetEvent.CommandOpcode = DAC960_V2_IOCTL;
5116           CommandMailbox->GetEvent.DataTransferSize = sizeof(DAC960_V2_Event_T);
5117           CommandMailbox->GetEvent.EventSequenceNumberHigh16 =
5118             Controller->V2.NextEventSequenceNumber >> 16;
5119           CommandMailbox->GetEvent.ControllerNumber = 0;
5120           CommandMailbox->GetEvent.IOCTL_Opcode =
5121             DAC960_V2_GetEvent;
5122           CommandMailbox->GetEvent.EventSequenceNumberLow16 =
5123             Controller->V2.NextEventSequenceNumber & 0xFFFF;
5124           CommandMailbox->GetEvent.DataTransferMemoryAddress
5125                                   .ScatterGatherSegments[0]
5126                                   .SegmentDataPointer =
5127             Controller->V2.EventDMA;
5128           CommandMailbox->GetEvent.DataTransferMemoryAddress
5129                                   .ScatterGatherSegments[0]
5130                                   .SegmentByteCount =
5131             CommandMailbox->GetEvent.DataTransferSize;
5132           DAC960_QueueCommand(Command);
5133           return;
5134         }
5135       if (Controller->V2.NeedPhysicalDeviceInformation)
5136         {
5137           if (Controller->V2.NeedDeviceSerialNumberInformation)
5138             {
5139               DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
5140                 Controller->V2.NewInquiryUnitSerialNumber;
5141               InquiryUnitSerialNumber->PeripheralDeviceType = 0x1F;
5142
5143               DAC960_V2_ConstructNewUnitSerialNumber(Controller, CommandMailbox,
5144                         Controller->V2.NewPhysicalDeviceInformation->Channel,
5145                         Controller->V2.NewPhysicalDeviceInformation->TargetID,
5146                 Controller->V2.NewPhysicalDeviceInformation->LogicalUnit - 1);
5147
5148
5149               DAC960_QueueCommand(Command);
5150               return;
5151             }
5152           if (Controller->V2.StartPhysicalDeviceInformationScan)
5153             {
5154               Controller->V2.PhysicalDeviceIndex = 0;
5155               Controller->V2.NewPhysicalDeviceInformation->Channel = 0;
5156               Controller->V2.NewPhysicalDeviceInformation->TargetID = 0;
5157               Controller->V2.NewPhysicalDeviceInformation->LogicalUnit = 0;
5158               Controller->V2.StartPhysicalDeviceInformationScan = false;
5159             }
5160           CommandMailbox->PhysicalDeviceInfo.CommandOpcode = DAC960_V2_IOCTL;
5161           CommandMailbox->PhysicalDeviceInfo.DataTransferSize =
5162             sizeof(DAC960_V2_PhysicalDeviceInfo_T);
5163           CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.LogicalUnit =
5164             Controller->V2.NewPhysicalDeviceInformation->LogicalUnit;
5165           CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.TargetID =
5166             Controller->V2.NewPhysicalDeviceInformation->TargetID;
5167           CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.Channel =
5168             Controller->V2.NewPhysicalDeviceInformation->Channel;
5169           CommandMailbox->PhysicalDeviceInfo.IOCTL_Opcode =
5170             DAC960_V2_GetPhysicalDeviceInfoValid;
5171           CommandMailbox->PhysicalDeviceInfo.DataTransferMemoryAddress
5172                                             .ScatterGatherSegments[0]
5173                                             .SegmentDataPointer =
5174             Controller->V2.NewPhysicalDeviceInformationDMA;
5175           CommandMailbox->PhysicalDeviceInfo.DataTransferMemoryAddress
5176                                             .ScatterGatherSegments[0]
5177                                             .SegmentByteCount =
5178             CommandMailbox->PhysicalDeviceInfo.DataTransferSize;
5179           DAC960_QueueCommand(Command);
5180           return;
5181         }
5182       if (Controller->V2.NeedLogicalDeviceInformation)
5183         {
5184           if (Controller->V2.StartLogicalDeviceInformationScan)
5185             {
5186               int LogicalDriveNumber;
5187               for (LogicalDriveNumber = 0;
5188                    LogicalDriveNumber < DAC960_MaxLogicalDrives;
5189                    LogicalDriveNumber++)
5190                 Controller->V2.LogicalDriveFoundDuringScan
5191                                [LogicalDriveNumber] = false;
5192               Controller->V2.NewLogicalDeviceInformation->LogicalDeviceNumber = 0;
5193               Controller->V2.StartLogicalDeviceInformationScan = false;
5194             }
5195           CommandMailbox->LogicalDeviceInfo.CommandOpcode = DAC960_V2_IOCTL;
5196           CommandMailbox->LogicalDeviceInfo.DataTransferSize =
5197             sizeof(DAC960_V2_LogicalDeviceInfo_T);
5198           CommandMailbox->LogicalDeviceInfo.LogicalDevice.LogicalDeviceNumber =
5199             Controller->V2.NewLogicalDeviceInformation->LogicalDeviceNumber;
5200           CommandMailbox->LogicalDeviceInfo.IOCTL_Opcode =
5201             DAC960_V2_GetLogicalDeviceInfoValid;
5202           CommandMailbox->LogicalDeviceInfo.DataTransferMemoryAddress
5203                                            .ScatterGatherSegments[0]
5204                                            .SegmentDataPointer =
5205             Controller->V2.NewLogicalDeviceInformationDMA;
5206           CommandMailbox->LogicalDeviceInfo.DataTransferMemoryAddress
5207                                            .ScatterGatherSegments[0]
5208                                            .SegmentByteCount =
5209             CommandMailbox->LogicalDeviceInfo.DataTransferSize;
5210           DAC960_QueueCommand(Command);
5211           return;
5212         }
5213       Controller->MonitoringTimerCount++;
5214       Controller->MonitoringTimer.expires =
5215         jiffies + DAC960_HealthStatusMonitoringInterval;
5216         add_timer(&Controller->MonitoringTimer);
5217     }
5218   if (CommandType == DAC960_ImmediateCommand)
5219     {
5220       complete(Command->Completion);
5221       Command->Completion = NULL;
5222       return;
5223     }
5224   if (CommandType == DAC960_QueuedCommand)
5225     {
5226       DAC960_V2_KernelCommand_T *KernelCommand = Command->V2.KernelCommand;
5227       KernelCommand->CommandStatus = CommandStatus;
5228       KernelCommand->RequestSenseLength = Command->V2.RequestSenseLength;
5229       KernelCommand->DataTransferLength = Command->V2.DataTransferResidue;
5230       Command->V2.KernelCommand = NULL;
5231       DAC960_DeallocateCommand(Command);
5232       KernelCommand->CompletionFunction(KernelCommand);
5233       return;
5234     }
5235   /*
5236     Queue a Status Monitoring Command to the Controller using the just
5237     completed Command if one was deferred previously due to lack of a
5238     free Command when the Monitoring Timer Function was called.
5239   */
5240   if (Controller->MonitoringCommandDeferred)
5241     {
5242       Controller->MonitoringCommandDeferred = false;
5243       DAC960_V2_QueueMonitoringCommand(Command);
5244       return;
5245     }
5246   /*
5247     Deallocate the Command.
5248   */
5249   DAC960_DeallocateCommand(Command);
5250   /*
5251     Wake up any processes waiting on a free Command.
5252   */
5253   wake_up(&Controller->CommandWaitQueue);
5254 }
5255
5256 /*
5257   DAC960_GEM_InterruptHandler handles hardware interrupts from DAC960 GEM Series
5258   Controllers.
5259 */
5260
5261 static irqreturn_t DAC960_GEM_InterruptHandler(int IRQ_Channel,
5262                                        void *DeviceIdentifier)
5263 {
5264   DAC960_Controller_T *Controller = DeviceIdentifier;
5265   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
5266   DAC960_V2_StatusMailbox_T *NextStatusMailbox;
5267   unsigned long flags;
5268
5269   spin_lock_irqsave(&Controller->queue_lock, flags);
5270   DAC960_GEM_AcknowledgeInterrupt(ControllerBaseAddress);
5271   NextStatusMailbox = Controller->V2.NextStatusMailbox;
5272   while (NextStatusMailbox->Fields.CommandIdentifier > 0)
5273     {
5274        DAC960_V2_CommandIdentifier_T CommandIdentifier =
5275            NextStatusMailbox->Fields.CommandIdentifier;
5276        DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1];
5277        Command->V2.CommandStatus = NextStatusMailbox->Fields.CommandStatus;
5278        Command->V2.RequestSenseLength =
5279            NextStatusMailbox->Fields.RequestSenseLength;
5280        Command->V2.DataTransferResidue =
5281            NextStatusMailbox->Fields.DataTransferResidue;
5282        NextStatusMailbox->Words[0] = 0;
5283        if (++NextStatusMailbox > Controller->V2.LastStatusMailbox)
5284            NextStatusMailbox = Controller->V2.FirstStatusMailbox;
5285        DAC960_V2_ProcessCompletedCommand(Command);
5286     }
5287   Controller->V2.NextStatusMailbox = NextStatusMailbox;
5288   /*
5289     Attempt to remove additional I/O Requests from the Controller's
5290     I/O Request Queue and queue them to the Controller.
5291   */
5292   DAC960_ProcessRequest(Controller);
5293   spin_unlock_irqrestore(&Controller->queue_lock, flags);
5294   return IRQ_HANDLED;
5295 }
5296
5297 /*
5298   DAC960_BA_InterruptHandler handles hardware interrupts from DAC960 BA Series
5299   Controllers.
5300 */
5301
5302 static irqreturn_t DAC960_BA_InterruptHandler(int IRQ_Channel,
5303                                        void *DeviceIdentifier)
5304 {
5305   DAC960_Controller_T *Controller = DeviceIdentifier;
5306   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
5307   DAC960_V2_StatusMailbox_T *NextStatusMailbox;
5308   unsigned long flags;
5309
5310   spin_lock_irqsave(&Controller->queue_lock, flags);
5311   DAC960_BA_AcknowledgeInterrupt(ControllerBaseAddress);
5312   NextStatusMailbox = Controller->V2.NextStatusMailbox;
5313   while (NextStatusMailbox->Fields.CommandIdentifier > 0)
5314     {
5315       DAC960_V2_CommandIdentifier_T CommandIdentifier =
5316         NextStatusMailbox->Fields.CommandIdentifier;
5317       DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1];
5318       Command->V2.CommandStatus = NextStatusMailbox->Fields.CommandStatus;
5319       Command->V2.RequestSenseLength =
5320         NextStatusMailbox->Fields.RequestSenseLength;
5321       Command->V2.DataTransferResidue =
5322         NextStatusMailbox->Fields.DataTransferResidue;
5323       NextStatusMailbox->Words[0] = 0;
5324       if (++NextStatusMailbox > Controller->V2.LastStatusMailbox)
5325         NextStatusMailbox = Controller->V2.FirstStatusMailbox;
5326       DAC960_V2_ProcessCompletedCommand(Command);
5327     }
5328   Controller->V2.NextStatusMailbox = NextStatusMailbox;
5329   /*
5330     Attempt to remove additional I/O Requests from the Controller's
5331     I/O Request Queue and queue them to the Controller.
5332   */
5333   DAC960_ProcessRequest(Controller);
5334   spin_unlock_irqrestore(&Controller->queue_lock, flags);
5335   return IRQ_HANDLED;
5336 }
5337
5338
5339 /*
5340   DAC960_LP_InterruptHandler handles hardware interrupts from DAC960 LP Series
5341   Controllers.
5342 */
5343
5344 static irqreturn_t DAC960_LP_InterruptHandler(int IRQ_Channel,
5345                                        void *DeviceIdentifier)
5346 {
5347   DAC960_Controller_T *Controller = DeviceIdentifier;
5348   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
5349   DAC960_V2_StatusMailbox_T *NextStatusMailbox;
5350   unsigned long flags;
5351
5352   spin_lock_irqsave(&Controller->queue_lock, flags);
5353   DAC960_LP_AcknowledgeInterrupt(ControllerBaseAddress);
5354   NextStatusMailbox = Controller->V2.NextStatusMailbox;
5355   while (NextStatusMailbox->Fields.CommandIdentifier > 0)
5356     {
5357       DAC960_V2_CommandIdentifier_T CommandIdentifier =
5358         NextStatusMailbox->Fields.CommandIdentifier;
5359       DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1];
5360       Command->V2.CommandStatus = NextStatusMailbox->Fields.CommandStatus;
5361       Command->V2.RequestSenseLength =
5362         NextStatusMailbox->Fields.RequestSenseLength;
5363       Command->V2.DataTransferResidue =
5364         NextStatusMailbox->Fields.DataTransferResidue;
5365       NextStatusMailbox->Words[0] = 0;
5366       if (++NextStatusMailbox > Controller->V2.LastStatusMailbox)
5367         NextStatusMailbox = Controller->V2.FirstStatusMailbox;
5368       DAC960_V2_ProcessCompletedCommand(Command);
5369     }
5370   Controller->V2.NextStatusMailbox = NextStatusMailbox;
5371   /*
5372     Attempt to remove additional I/O Requests from the Controller's
5373     I/O Request Queue and queue them to the Controller.
5374   */
5375   DAC960_ProcessRequest(Controller);
5376   spin_unlock_irqrestore(&Controller->queue_lock, flags);
5377   return IRQ_HANDLED;
5378 }
5379
5380
5381 /*
5382   DAC960_LA_InterruptHandler handles hardware interrupts from DAC960 LA Series
5383   Controllers.
5384 */
5385
5386 static irqreturn_t DAC960_LA_InterruptHandler(int IRQ_Channel,
5387                                        void *DeviceIdentifier)
5388 {
5389   DAC960_Controller_T *Controller = DeviceIdentifier;
5390   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
5391   DAC960_V1_StatusMailbox_T *NextStatusMailbox;
5392   unsigned long flags;
5393
5394   spin_lock_irqsave(&Controller->queue_lock, flags);
5395   DAC960_LA_AcknowledgeInterrupt(ControllerBaseAddress);
5396   NextStatusMailbox = Controller->V1.NextStatusMailbox;
5397   while (NextStatusMailbox->Fields.Valid)
5398     {
5399       DAC960_V1_CommandIdentifier_T CommandIdentifier =
5400         NextStatusMailbox->Fields.CommandIdentifier;
5401       DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1];
5402       Command->V1.CommandStatus = NextStatusMailbox->Fields.CommandStatus;
5403       NextStatusMailbox->Word = 0;
5404       if (++NextStatusMailbox > Controller->V1.LastStatusMailbox)
5405         NextStatusMailbox = Controller->V1.FirstStatusMailbox;
5406       DAC960_V1_ProcessCompletedCommand(Command);
5407     }
5408   Controller->V1.NextStatusMailbox = NextStatusMailbox;
5409   /*
5410     Attempt to remove additional I/O Requests from the Controller's
5411     I/O Request Queue and queue them to the Controller.
5412   */
5413   DAC960_ProcessRequest(Controller);
5414   spin_unlock_irqrestore(&Controller->queue_lock, flags);
5415   return IRQ_HANDLED;
5416 }
5417
5418
5419 /*
5420   DAC960_PG_InterruptHandler handles hardware interrupts from DAC960 PG Series
5421   Controllers.
5422 */
5423
5424 static irqreturn_t DAC960_PG_InterruptHandler(int IRQ_Channel,
5425                                        void *DeviceIdentifier)
5426 {
5427   DAC960_Controller_T *Controller = DeviceIdentifier;
5428   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
5429   DAC960_V1_StatusMailbox_T *NextStatusMailbox;
5430   unsigned long flags;
5431
5432   spin_lock_irqsave(&Controller->queue_lock, flags);
5433   DAC960_PG_AcknowledgeInterrupt(ControllerBaseAddress);
5434   NextStatusMailbox = Controller->V1.NextStatusMailbox;
5435   while (NextStatusMailbox->Fields.Valid)
5436     {
5437       DAC960_V1_CommandIdentifier_T CommandIdentifier =
5438         NextStatusMailbox->Fields.CommandIdentifier;
5439       DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1];
5440       Command->V1.CommandStatus = NextStatusMailbox->Fields.CommandStatus;
5441       NextStatusMailbox->Word = 0;
5442       if (++NextStatusMailbox > Controller->V1.LastStatusMailbox)
5443         NextStatusMailbox = Controller->V1.FirstStatusMailbox;
5444       DAC960_V1_ProcessCompletedCommand(Command);
5445     }
5446   Controller->V1.NextStatusMailbox = NextStatusMailbox;
5447   /*
5448     Attempt to remove additional I/O Requests from the Controller's
5449     I/O Request Queue and queue them to the Controller.
5450   */
5451   DAC960_ProcessRequest(Controller);
5452   spin_unlock_irqrestore(&Controller->queue_lock, flags);
5453   return IRQ_HANDLED;
5454 }
5455
5456
5457 /*
5458   DAC960_PD_InterruptHandler handles hardware interrupts from DAC960 PD Series
5459   Controllers.
5460 */
5461
5462 static irqreturn_t DAC960_PD_InterruptHandler(int IRQ_Channel,
5463                                        void *DeviceIdentifier)
5464 {
5465   DAC960_Controller_T *Controller = DeviceIdentifier;
5466   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
5467   unsigned long flags;
5468
5469   spin_lock_irqsave(&Controller->queue_lock, flags);
5470   while (DAC960_PD_StatusAvailableP(ControllerBaseAddress))
5471     {
5472       DAC960_V1_CommandIdentifier_T CommandIdentifier =
5473         DAC960_PD_ReadStatusCommandIdentifier(ControllerBaseAddress);
5474       DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1];
5475       Command->V1.CommandStatus =
5476         DAC960_PD_ReadStatusRegister(ControllerBaseAddress);
5477       DAC960_PD_AcknowledgeInterrupt(ControllerBaseAddress);
5478       DAC960_PD_AcknowledgeStatus(ControllerBaseAddress);
5479       DAC960_V1_ProcessCompletedCommand(Command);
5480     }
5481   /*
5482     Attempt to remove additional I/O Requests from the Controller's
5483     I/O Request Queue and queue them to the Controller.
5484   */
5485   DAC960_ProcessRequest(Controller);
5486   spin_unlock_irqrestore(&Controller->queue_lock, flags);
5487   return IRQ_HANDLED;
5488 }
5489
5490
5491 /*
5492   DAC960_P_InterruptHandler handles hardware interrupts from DAC960 P Series
5493   Controllers.
5494
5495   Translations of DAC960_V1_Enquiry and DAC960_V1_GetDeviceState rely
5496   on the data having been placed into DAC960_Controller_T, rather than
5497   an arbitrary buffer.
5498 */
5499
5500 static irqreturn_t DAC960_P_InterruptHandler(int IRQ_Channel,
5501                                       void *DeviceIdentifier)
5502 {
5503   DAC960_Controller_T *Controller = DeviceIdentifier;
5504   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
5505   unsigned long flags;
5506
5507   spin_lock_irqsave(&Controller->queue_lock, flags);
5508   while (DAC960_PD_StatusAvailableP(ControllerBaseAddress))
5509     {
5510       DAC960_V1_CommandIdentifier_T CommandIdentifier =
5511         DAC960_PD_ReadStatusCommandIdentifier(ControllerBaseAddress);
5512       DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1];
5513       DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
5514       DAC960_V1_CommandOpcode_T CommandOpcode =
5515         CommandMailbox->Common.CommandOpcode;
5516       Command->V1.CommandStatus =
5517         DAC960_PD_ReadStatusRegister(ControllerBaseAddress);
5518       DAC960_PD_AcknowledgeInterrupt(ControllerBaseAddress);
5519       DAC960_PD_AcknowledgeStatus(ControllerBaseAddress);
5520       switch (CommandOpcode)
5521         {
5522         case DAC960_V1_Enquiry_Old:
5523           Command->V1.CommandMailbox.Common.CommandOpcode = DAC960_V1_Enquiry;
5524           DAC960_P_To_PD_TranslateEnquiry(Controller->V1.NewEnquiry);
5525           break;
5526         case DAC960_V1_GetDeviceState_Old:
5527           Command->V1.CommandMailbox.Common.CommandOpcode =
5528                                                 DAC960_V1_GetDeviceState;
5529           DAC960_P_To_PD_TranslateDeviceState(Controller->V1.NewDeviceState);
5530           break;
5531         case DAC960_V1_Read_Old:
5532           Command->V1.CommandMailbox.Common.CommandOpcode = DAC960_V1_Read;
5533           DAC960_P_To_PD_TranslateReadWriteCommand(CommandMailbox);
5534           break;
5535         case DAC960_V1_Write_Old:
5536           Command->V1.CommandMailbox.Common.CommandOpcode = DAC960_V1_Write;
5537           DAC960_P_To_PD_TranslateReadWriteCommand(CommandMailbox);
5538           break;
5539         case DAC960_V1_ReadWithScatterGather_Old:
5540           Command->V1.CommandMailbox.Common.CommandOpcode =
5541             DAC960_V1_ReadWithScatterGather;
5542           DAC960_P_To_PD_TranslateReadWriteCommand(CommandMailbox);
5543           break;
5544         case DAC960_V1_WriteWithScatterGather_Old:
5545           Command->V1.CommandMailbox.Common.CommandOpcode =
5546             DAC960_V1_WriteWithScatterGather;
5547           DAC960_P_To_PD_TranslateReadWriteCommand(CommandMailbox);
5548           break;
5549         default:
5550           break;
5551         }
5552       DAC960_V1_ProcessCompletedCommand(Command);
5553     }
5554   /*
5555     Attempt to remove additional I/O Requests from the Controller's
5556     I/O Request Queue and queue them to the Controller.
5557   */
5558   DAC960_ProcessRequest(Controller);
5559   spin_unlock_irqrestore(&Controller->queue_lock, flags);
5560   return IRQ_HANDLED;
5561 }
5562
5563
5564 /*
5565   DAC960_V1_QueueMonitoringCommand queues a Monitoring Command to DAC960 V1
5566   Firmware Controllers.
5567 */
5568
5569 static void DAC960_V1_QueueMonitoringCommand(DAC960_Command_T *Command)
5570 {
5571   DAC960_Controller_T *Controller = Command->Controller;
5572   DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
5573   DAC960_V1_ClearCommand(Command);
5574   Command->CommandType = DAC960_MonitoringCommand;
5575   CommandMailbox->Type3.CommandOpcode = DAC960_V1_Enquiry;
5576   CommandMailbox->Type3.BusAddress = Controller->V1.NewEnquiryDMA;
5577   DAC960_QueueCommand(Command);
5578 }
5579
5580
5581 /*
5582   DAC960_V2_QueueMonitoringCommand queues a Monitoring Command to DAC960 V2
5583   Firmware Controllers.
5584 */
5585
5586 static void DAC960_V2_QueueMonitoringCommand(DAC960_Command_T *Command)
5587 {
5588   DAC960_Controller_T *Controller = Command->Controller;
5589   DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
5590   DAC960_V2_ClearCommand(Command);
5591   Command->CommandType = DAC960_MonitoringCommand;
5592   CommandMailbox->ControllerInfo.CommandOpcode = DAC960_V2_IOCTL;
5593   CommandMailbox->ControllerInfo.CommandControlBits
5594                                 .DataTransferControllerToHost = true;
5595   CommandMailbox->ControllerInfo.CommandControlBits
5596                                 .NoAutoRequestSense = true;
5597   CommandMailbox->ControllerInfo.DataTransferSize =
5598     sizeof(DAC960_V2_ControllerInfo_T);
5599   CommandMailbox->ControllerInfo.ControllerNumber = 0;
5600   CommandMailbox->ControllerInfo.IOCTL_Opcode = DAC960_V2_GetControllerInfo;
5601   CommandMailbox->ControllerInfo.DataTransferMemoryAddress
5602                                 .ScatterGatherSegments[0]
5603                                 .SegmentDataPointer =
5604     Controller->V2.NewControllerInformationDMA;
5605   CommandMailbox->ControllerInfo.DataTransferMemoryAddress
5606                                 .ScatterGatherSegments[0]
5607                                 .SegmentByteCount =
5608     CommandMailbox->ControllerInfo.DataTransferSize;
5609   DAC960_QueueCommand(Command);
5610 }
5611
5612
5613 /*
5614   DAC960_MonitoringTimerFunction is the timer function for monitoring
5615   the status of DAC960 Controllers.
5616 */
5617
5618 static void DAC960_MonitoringTimerFunction(unsigned long TimerData)
5619 {
5620   DAC960_Controller_T *Controller = (DAC960_Controller_T *) TimerData;
5621   DAC960_Command_T *Command;
5622   unsigned long flags;
5623
5624   if (Controller->FirmwareType == DAC960_V1_Controller)
5625     {
5626       spin_lock_irqsave(&Controller->queue_lock, flags);
5627       /*
5628         Queue a Status Monitoring Command to Controller.
5629       */
5630       Command = DAC960_AllocateCommand(Controller);
5631       if (Command != NULL)
5632         DAC960_V1_QueueMonitoringCommand(Command);
5633       else Controller->MonitoringCommandDeferred = true;
5634       spin_unlock_irqrestore(&Controller->queue_lock, flags);
5635     }
5636   else
5637     {
5638       DAC960_V2_ControllerInfo_T *ControllerInfo =
5639         &Controller->V2.ControllerInformation;
5640       unsigned int StatusChangeCounter =
5641         Controller->V2.HealthStatusBuffer->StatusChangeCounter;
5642       bool ForceMonitoringCommand = false;
5643       if (time_after(jiffies, Controller->SecondaryMonitoringTime
5644           + DAC960_SecondaryMonitoringInterval))
5645         {
5646           int LogicalDriveNumber;
5647           for (LogicalDriveNumber = 0;
5648                LogicalDriveNumber < DAC960_MaxLogicalDrives;
5649                LogicalDriveNumber++)
5650             {
5651               DAC960_V2_LogicalDeviceInfo_T *LogicalDeviceInfo =
5652                 Controller->V2.LogicalDeviceInformation[LogicalDriveNumber];
5653               if (LogicalDeviceInfo == NULL) continue;
5654               if (!LogicalDeviceInfo->LogicalDeviceControl
5655                                      .LogicalDeviceInitialized)
5656                 {
5657                   ForceMonitoringCommand = true;
5658                   break;
5659                 }
5660             }
5661           Controller->SecondaryMonitoringTime = jiffies;
5662         }
5663       if (StatusChangeCounter == Controller->V2.StatusChangeCounter &&
5664           Controller->V2.HealthStatusBuffer->NextEventSequenceNumber
5665           == Controller->V2.NextEventSequenceNumber &&
5666           (ControllerInfo->BackgroundInitializationsActive +
5667            ControllerInfo->LogicalDeviceInitializationsActive +
5668            ControllerInfo->PhysicalDeviceInitializationsActive +
5669            ControllerInfo->ConsistencyChecksActive +
5670            ControllerInfo->RebuildsActive +
5671            ControllerInfo->OnlineExpansionsActive == 0 ||
5672            time_before(jiffies, Controller->PrimaryMonitoringTime
5673            + DAC960_MonitoringTimerInterval)) &&
5674           !ForceMonitoringCommand)
5675         {
5676           Controller->MonitoringTimer.expires =
5677             jiffies + DAC960_HealthStatusMonitoringInterval;
5678             add_timer(&Controller->MonitoringTimer);
5679           return;
5680         }
5681       Controller->V2.StatusChangeCounter = StatusChangeCounter;
5682       Controller->PrimaryMonitoringTime = jiffies;
5683
5684       spin_lock_irqsave(&Controller->queue_lock, flags);
5685       /*
5686         Queue a Status Monitoring Command to Controller.
5687       */
5688       Command = DAC960_AllocateCommand(Controller);
5689       if (Command != NULL)
5690         DAC960_V2_QueueMonitoringCommand(Command);
5691       else Controller->MonitoringCommandDeferred = true;
5692       spin_unlock_irqrestore(&Controller->queue_lock, flags);
5693       /*
5694         Wake up any processes waiting on a Health Status Buffer change.
5695       */
5696       wake_up(&Controller->HealthStatusWaitQueue);
5697     }
5698 }
5699
5700 /*
5701   DAC960_CheckStatusBuffer verifies that there is room to hold ByteCount
5702   additional bytes in the Combined Status Buffer and grows the buffer if
5703   necessary.  It returns true if there is enough room and false otherwise.
5704 */
5705
5706 static bool DAC960_CheckStatusBuffer(DAC960_Controller_T *Controller,
5707                                         unsigned int ByteCount)
5708 {
5709   unsigned char *NewStatusBuffer;
5710   if (Controller->InitialStatusLength + 1 +
5711       Controller->CurrentStatusLength + ByteCount + 1 <=
5712       Controller->CombinedStatusBufferLength)
5713     return true;
5714   if (Controller->CombinedStatusBufferLength == 0)
5715     {
5716       unsigned int NewStatusBufferLength = DAC960_InitialStatusBufferSize;
5717       while (NewStatusBufferLength < ByteCount)
5718         NewStatusBufferLength *= 2;
5719       Controller->CombinedStatusBuffer = kmalloc(NewStatusBufferLength,
5720                                                   GFP_ATOMIC);
5721       if (Controller->CombinedStatusBuffer == NULL) return false;
5722       Controller->CombinedStatusBufferLength = NewStatusBufferLength;
5723       return true;
5724     }
5725   NewStatusBuffer = kmalloc(2 * Controller->CombinedStatusBufferLength,
5726                              GFP_ATOMIC);
5727   if (NewStatusBuffer == NULL)
5728     {
5729       DAC960_Warning("Unable to expand Combined Status Buffer - Truncating\n",
5730                      Controller);
5731       return false;
5732     }
5733   memcpy(NewStatusBuffer, Controller->CombinedStatusBuffer,
5734          Controller->CombinedStatusBufferLength);
5735   kfree(Controller->CombinedStatusBuffer);
5736   Controller->CombinedStatusBuffer = NewStatusBuffer;
5737   Controller->CombinedStatusBufferLength *= 2;
5738   Controller->CurrentStatusBuffer =
5739     &NewStatusBuffer[Controller->InitialStatusLength + 1];
5740   return true;
5741 }
5742
5743
5744 /*
5745   DAC960_Message prints Driver Messages.
5746 */
5747
5748 static void DAC960_Message(DAC960_MessageLevel_T MessageLevel,
5749                            unsigned char *Format,
5750                            DAC960_Controller_T *Controller,
5751                            ...)
5752 {
5753   static unsigned char Buffer[DAC960_LineBufferSize];
5754   static bool BeginningOfLine = true;
5755   va_list Arguments;
5756   int Length = 0;
5757   va_start(Arguments, Controller);
5758   Length = vsprintf(Buffer, Format, Arguments);
5759   va_end(Arguments);
5760   if (Controller == NULL)
5761     printk("%sDAC960#%d: %s", DAC960_MessageLevelMap[MessageLevel],
5762            DAC960_ControllerCount, Buffer);
5763   else if (MessageLevel == DAC960_AnnounceLevel ||
5764            MessageLevel == DAC960_InfoLevel)
5765     {
5766       if (!Controller->ControllerInitialized)
5767         {
5768           if (DAC960_CheckStatusBuffer(Controller, Length))
5769             {
5770               strcpy(&Controller->CombinedStatusBuffer
5771                                   [Controller->InitialStatusLength],
5772                      Buffer);
5773               Controller->InitialStatusLength += Length;
5774               Controller->CurrentStatusBuffer =
5775                 &Controller->CombinedStatusBuffer
5776                              [Controller->InitialStatusLength + 1];
5777             }
5778           if (MessageLevel == DAC960_AnnounceLevel)
5779             {
5780               static int AnnouncementLines = 0;
5781               if (++AnnouncementLines <= 2)
5782                 printk("%sDAC960: %s", DAC960_MessageLevelMap[MessageLevel],
5783                        Buffer);
5784             }
5785           else
5786             {
5787               if (BeginningOfLine)
5788                 {
5789                   if (Buffer[0] != '\n' || Length > 1)
5790                     printk("%sDAC960#%d: %s",
5791                            DAC960_MessageLevelMap[MessageLevel],
5792                            Controller->ControllerNumber, Buffer);
5793                 }
5794               else printk("%s", Buffer);
5795             }
5796         }
5797       else if (DAC960_CheckStatusBuffer(Controller, Length))
5798         {
5799           strcpy(&Controller->CurrentStatusBuffer[
5800                     Controller->CurrentStatusLength], Buffer);
5801           Controller->CurrentStatusLength += Length;
5802         }
5803     }
5804   else if (MessageLevel == DAC960_ProgressLevel)
5805     {
5806       strcpy(Controller->ProgressBuffer, Buffer);
5807       Controller->ProgressBufferLength = Length;
5808       if (Controller->EphemeralProgressMessage)
5809         {
5810           if (time_after_eq(jiffies, Controller->LastProgressReportTime
5811               + DAC960_ProgressReportingInterval))
5812             {
5813               printk("%sDAC960#%d: %s", DAC960_MessageLevelMap[MessageLevel],
5814                      Controller->ControllerNumber, Buffer);
5815               Controller->LastProgressReportTime = jiffies;
5816             }
5817         }
5818       else printk("%sDAC960#%d: %s", DAC960_MessageLevelMap[MessageLevel],
5819                   Controller->ControllerNumber, Buffer);
5820     }
5821   else if (MessageLevel == DAC960_UserCriticalLevel)
5822     {
5823       strcpy(&Controller->UserStatusBuffer[Controller->UserStatusLength],
5824              Buffer);
5825       Controller->UserStatusLength += Length;
5826       if (Buffer[0] != '\n' || Length > 1)
5827         printk("%sDAC960#%d: %s", DAC960_MessageLevelMap[MessageLevel],
5828                Controller->ControllerNumber, Buffer);
5829     }
5830   else
5831     {
5832       if (BeginningOfLine)
5833         printk("%sDAC960#%d: %s", DAC960_MessageLevelMap[MessageLevel],
5834                Controller->ControllerNumber, Buffer);
5835       else printk("%s", Buffer);
5836     }
5837   BeginningOfLine = (Buffer[Length-1] == '\n');
5838 }
5839
5840
5841 /*
5842   DAC960_ParsePhysicalDevice parses spaces followed by a Physical Device
5843   Channel:TargetID specification from a User Command string.  It updates
5844   Channel and TargetID and returns true on success and false on failure.
5845 */
5846
5847 static bool DAC960_ParsePhysicalDevice(DAC960_Controller_T *Controller,
5848                                           char *UserCommandString,
5849                                           unsigned char *Channel,
5850                                           unsigned char *TargetID)
5851 {
5852   char *NewUserCommandString = UserCommandString;
5853   unsigned long XChannel, XTargetID;
5854   while (*UserCommandString == ' ') UserCommandString++;
5855   if (UserCommandString == NewUserCommandString)
5856     return false;
5857   XChannel = simple_strtoul(UserCommandString, &NewUserCommandString, 10);
5858   if (NewUserCommandString == UserCommandString ||
5859       *NewUserCommandString != ':' ||
5860       XChannel >= Controller->Channels)
5861     return false;
5862   UserCommandString = ++NewUserCommandString;
5863   XTargetID = simple_strtoul(UserCommandString, &NewUserCommandString, 10);
5864   if (NewUserCommandString == UserCommandString ||
5865       *NewUserCommandString != '\0' ||
5866       XTargetID >= Controller->Targets)
5867     return false;
5868   *Channel = XChannel;
5869   *TargetID = XTargetID;
5870   return true;
5871 }
5872
5873
5874 /*
5875   DAC960_ParseLogicalDrive parses spaces followed by a Logical Drive Number
5876   specification from a User Command string.  It updates LogicalDriveNumber and
5877   returns true on success and false on failure.
5878 */
5879
5880 static bool DAC960_ParseLogicalDrive(DAC960_Controller_T *Controller,
5881                                         char *UserCommandString,
5882                                         unsigned char *LogicalDriveNumber)
5883 {
5884   char *NewUserCommandString = UserCommandString;
5885   unsigned long XLogicalDriveNumber;
5886   while (*UserCommandString == ' ') UserCommandString++;
5887   if (UserCommandString == NewUserCommandString)
5888     return false;
5889   XLogicalDriveNumber =
5890     simple_strtoul(UserCommandString, &NewUserCommandString, 10);
5891   if (NewUserCommandString == UserCommandString ||
5892       *NewUserCommandString != '\0' ||
5893       XLogicalDriveNumber > DAC960_MaxLogicalDrives - 1)
5894     return false;
5895   *LogicalDriveNumber = XLogicalDriveNumber;
5896   return true;
5897 }
5898
5899
5900 /*
5901   DAC960_V1_SetDeviceState sets the Device State for a Physical Device for
5902   DAC960 V1 Firmware Controllers.
5903 */
5904
5905 static void DAC960_V1_SetDeviceState(DAC960_Controller_T *Controller,
5906                                      DAC960_Command_T *Command,
5907                                      unsigned char Channel,
5908                                      unsigned char TargetID,
5909                                      DAC960_V1_PhysicalDeviceState_T
5910                                        DeviceState,
5911                                      const unsigned char *DeviceStateString)
5912 {
5913   DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
5914   CommandMailbox->Type3D.CommandOpcode = DAC960_V1_StartDevice;
5915   CommandMailbox->Type3D.Channel = Channel;
5916   CommandMailbox->Type3D.TargetID = TargetID;
5917   CommandMailbox->Type3D.DeviceState = DeviceState;
5918   CommandMailbox->Type3D.Modifier = 0;
5919   DAC960_ExecuteCommand(Command);
5920   switch (Command->V1.CommandStatus)
5921     {
5922     case DAC960_V1_NormalCompletion:
5923       DAC960_UserCritical("%s of Physical Device %d:%d Succeeded\n", Controller,
5924                           DeviceStateString, Channel, TargetID);
5925       break;
5926     case DAC960_V1_UnableToStartDevice:
5927       DAC960_UserCritical("%s of Physical Device %d:%d Failed - "
5928                           "Unable to Start Device\n", Controller,
5929                           DeviceStateString, Channel, TargetID);
5930       break;
5931     case DAC960_V1_NoDeviceAtAddress:
5932       DAC960_UserCritical("%s of Physical Device %d:%d Failed - "
5933                           "No Device at Address\n", Controller,
5934                           DeviceStateString, Channel, TargetID);
5935       break;
5936     case DAC960_V1_InvalidChannelOrTargetOrModifier:
5937       DAC960_UserCritical("%s of Physical Device %d:%d Failed - "
5938                           "Invalid Channel or Target or Modifier\n",
5939                           Controller, DeviceStateString, Channel, TargetID);
5940       break;
5941     case DAC960_V1_ChannelBusy:
5942       DAC960_UserCritical("%s of Physical Device %d:%d Failed - "
5943                           "Channel Busy\n", Controller,
5944                           DeviceStateString, Channel, TargetID);
5945       break;
5946     default:
5947       DAC960_UserCritical("%s of Physical Device %d:%d Failed - "
5948                           "Unexpected Status %04X\n", Controller,
5949                           DeviceStateString, Channel, TargetID,
5950                           Command->V1.CommandStatus);
5951       break;
5952     }
5953 }
5954
5955
5956 /*
5957   DAC960_V1_ExecuteUserCommand executes a User Command for DAC960 V1 Firmware
5958   Controllers.
5959 */
5960
5961 static bool DAC960_V1_ExecuteUserCommand(DAC960_Controller_T *Controller,
5962                                             unsigned char *UserCommand)
5963 {
5964   DAC960_Command_T *Command;
5965   DAC960_V1_CommandMailbox_T *CommandMailbox;
5966   unsigned long flags;
5967   unsigned char Channel, TargetID, LogicalDriveNumber;
5968
5969   spin_lock_irqsave(&Controller->queue_lock, flags);
5970   while ((Command = DAC960_AllocateCommand(Controller)) == NULL)
5971     DAC960_WaitForCommand(Controller);
5972   spin_unlock_irqrestore(&Controller->queue_lock, flags);
5973   Controller->UserStatusLength = 0;
5974   DAC960_V1_ClearCommand(Command);
5975   Command->CommandType = DAC960_ImmediateCommand;
5976   CommandMailbox = &Command->V1.CommandMailbox;
5977   if (strcmp(UserCommand, "flush-cache") == 0)
5978     {
5979       CommandMailbox->Type3.CommandOpcode = DAC960_V1_Flush;
5980       DAC960_ExecuteCommand(Command);
5981       DAC960_UserCritical("Cache Flush Completed\n", Controller);
5982     }
5983   else if (strncmp(UserCommand, "kill", 4) == 0 &&
5984            DAC960_ParsePhysicalDevice(Controller, &UserCommand[4],
5985                                       &Channel, &TargetID))
5986     {
5987       DAC960_V1_DeviceState_T *DeviceState =
5988         &Controller->V1.DeviceState[Channel][TargetID];
5989       if (DeviceState->Present &&
5990           DeviceState->DeviceType == DAC960_V1_DiskType &&
5991           DeviceState->DeviceState != DAC960_V1_Device_Dead)
5992         DAC960_V1_SetDeviceState(Controller, Command, Channel, TargetID,
5993                                  DAC960_V1_Device_Dead, "Kill");
5994       else DAC960_UserCritical("Kill of Physical Device %d:%d Illegal\n",
5995                                Controller, Channel, TargetID);
5996     }
5997   else if (strncmp(UserCommand, "make-online", 11) == 0 &&
5998            DAC960_ParsePhysicalDevice(Controller, &UserCommand[11],
5999                                       &Channel, &TargetID))
6000     {
6001       DAC960_V1_DeviceState_T *DeviceState =
6002         &Controller->V1.DeviceState[Channel][TargetID];
6003       if (DeviceState->Present &&
6004           DeviceState->DeviceType == DAC960_V1_DiskType &&
6005           DeviceState->DeviceState == DAC960_V1_Device_Dead)
6006         DAC960_V1_SetDeviceState(Controller, Command, Channel, TargetID,
6007                                  DAC960_V1_Device_Online, "Make Online");
6008       else DAC960_UserCritical("Make Online of Physical Device %d:%d Illegal\n",
6009                                Controller, Channel, TargetID);
6010
6011     }
6012   else if (strncmp(UserCommand, "make-standby", 12) == 0 &&
6013            DAC960_ParsePhysicalDevice(Controller, &UserCommand[12],
6014                                       &Channel, &TargetID))
6015     {
6016       DAC960_V1_DeviceState_T *DeviceState =
6017         &Controller->V1.DeviceState[Channel][TargetID];
6018       if (DeviceState->Present &&
6019           DeviceState->DeviceType == DAC960_V1_DiskType &&
6020           DeviceState->DeviceState == DAC960_V1_Device_Dead)
6021         DAC960_V1_SetDeviceState(Controller, Command, Channel, TargetID,
6022                                  DAC960_V1_Device_Standby, "Make Standby");
6023       else DAC960_UserCritical("Make Standby of Physical "
6024                                "Device %d:%d Illegal\n",
6025                                Controller, Channel, TargetID);
6026     }
6027   else if (strncmp(UserCommand, "rebuild", 7) == 0 &&
6028            DAC960_ParsePhysicalDevice(Controller, &UserCommand[7],
6029                                       &Channel, &TargetID))
6030     {
6031       CommandMailbox->Type3D.CommandOpcode = DAC960_V1_RebuildAsync;
6032       CommandMailbox->Type3D.Channel = Channel;
6033       CommandMailbox->Type3D.TargetID = TargetID;
6034       DAC960_ExecuteCommand(Command);
6035       switch (Command->V1.CommandStatus)
6036         {
6037         case DAC960_V1_NormalCompletion:
6038           DAC960_UserCritical("Rebuild of Physical Device %d:%d Initiated\n",
6039                               Controller, Channel, TargetID);
6040           break;
6041         case DAC960_V1_AttemptToRebuildOnlineDrive:
6042           DAC960_UserCritical("Rebuild of Physical Device %d:%d Failed - "
6043                               "Attempt to Rebuild Online or "
6044                               "Unresponsive Drive\n",
6045                               Controller, Channel, TargetID);
6046           break;
6047         case DAC960_V1_NewDiskFailedDuringRebuild:
6048           DAC960_UserCritical("Rebuild of Physical Device %d:%d Failed - "
6049                               "New Disk Failed During Rebuild\n",
6050                               Controller, Channel, TargetID);
6051           break;
6052         case DAC960_V1_InvalidDeviceAddress:
6053           DAC960_UserCritical("Rebuild of Physical Device %d:%d Failed - "
6054                               "Invalid Device Address\n",
6055                               Controller, Channel, TargetID);
6056           break;
6057         case DAC960_V1_RebuildOrCheckAlreadyInProgress:
6058           DAC960_UserCritical("Rebuild of Physical Device %d:%d Failed - "
6059                               "Rebuild or Consistency Check Already "
6060                               "in Progress\n", Controller, Channel, TargetID);
6061           break;
6062         default:
6063           DAC960_UserCritical("Rebuild of Physical Device %d:%d Failed - "
6064                               "Unexpected Status %04X\n", Controller,
6065                               Channel, TargetID, Command->V1.CommandStatus);
6066           break;
6067         }
6068     }
6069   else if (strncmp(UserCommand, "check-consistency", 17) == 0 &&
6070            DAC960_ParseLogicalDrive(Controller, &UserCommand[17],
6071                                     &LogicalDriveNumber))
6072     {
6073       CommandMailbox->Type3C.CommandOpcode = DAC960_V1_CheckConsistencyAsync;
6074       CommandMailbox->Type3C.LogicalDriveNumber = LogicalDriveNumber;
6075       CommandMailbox->Type3C.AutoRestore = true;
6076       DAC960_ExecuteCommand(Command);
6077       switch (Command->V1.CommandStatus)
6078         {
6079         case DAC960_V1_NormalCompletion:
6080           DAC960_UserCritical("Consistency Check of Logical Drive %d "
6081                               "(/dev/rd/c%dd%d) Initiated\n",
6082                               Controller, LogicalDriveNumber,
6083                               Controller->ControllerNumber,
6084                               LogicalDriveNumber);
6085           break;
6086         case DAC960_V1_DependentDiskIsDead:
6087           DAC960_UserCritical("Consistency Check of Logical Drive %d "
6088                               "(/dev/rd/c%dd%d) Failed - "
6089                               "Dependent Physical Device is DEAD\n",
6090                               Controller, LogicalDriveNumber,
6091                               Controller->ControllerNumber,
6092                               LogicalDriveNumber);
6093           break;
6094         case DAC960_V1_InvalidOrNonredundantLogicalDrive:
6095           DAC960_UserCritical("Consistency Check of Logical Drive %d "
6096                               "(/dev/rd/c%dd%d) Failed - "
6097                               "Invalid or Nonredundant Logical Drive\n",
6098                               Controller, LogicalDriveNumber,
6099                               Controller->ControllerNumber,
6100                               LogicalDriveNumber);
6101           break;
6102         case DAC960_V1_RebuildOrCheckAlreadyInProgress:
6103           DAC960_UserCritical("Consistency Check of Logical Drive %d "
6104                               "(/dev/rd/c%dd%d) Failed - Rebuild or "
6105                               "Consistency Check Already in Progress\n",
6106                               Controller, LogicalDriveNumber,
6107                               Controller->ControllerNumber,
6108                               LogicalDriveNumber);
6109           break;
6110         default:
6111           DAC960_UserCritical("Consistency Check of Logical Drive %d "
6112                               "(/dev/rd/c%dd%d) Failed - "
6113                               "Unexpected Status %04X\n",
6114                               Controller, LogicalDriveNumber,
6115                               Controller->ControllerNumber,
6116                               LogicalDriveNumber, Command->V1.CommandStatus);
6117           break;
6118         }
6119     }
6120   else if (strcmp(UserCommand, "cancel-rebuild") == 0 ||
6121            strcmp(UserCommand, "cancel-consistency-check") == 0)
6122     {
6123       /*
6124         the OldRebuildRateConstant is never actually used
6125         once its value is retrieved from the controller.
6126        */
6127       unsigned char *OldRebuildRateConstant;
6128       dma_addr_t OldRebuildRateConstantDMA;
6129
6130       OldRebuildRateConstant = pci_alloc_consistent( Controller->PCIDevice,
6131                 sizeof(char), &OldRebuildRateConstantDMA);
6132       if (OldRebuildRateConstant == NULL) {
6133          DAC960_UserCritical("Cancellation of Rebuild or "
6134                              "Consistency Check Failed - "
6135                              "Out of Memory",
6136                              Controller);
6137          goto failure;
6138       }
6139       CommandMailbox->Type3R.CommandOpcode = DAC960_V1_RebuildControl;
6140       CommandMailbox->Type3R.RebuildRateConstant = 0xFF;
6141       CommandMailbox->Type3R.BusAddress = OldRebuildRateConstantDMA;
6142       DAC960_ExecuteCommand(Command);
6143       switch (Command->V1.CommandStatus)
6144         {
6145         case DAC960_V1_NormalCompletion:
6146           DAC960_UserCritical("Rebuild or Consistency Check Cancelled\n",
6147                               Controller);
6148           break;
6149         default:
6150           DAC960_UserCritical("Cancellation of Rebuild or "
6151                               "Consistency Check Failed - "
6152                               "Unexpected Status %04X\n",
6153                               Controller, Command->V1.CommandStatus);
6154           break;
6155         }
6156 failure:
6157         pci_free_consistent(Controller->PCIDevice, sizeof(char),
6158                 OldRebuildRateConstant, OldRebuildRateConstantDMA);
6159     }
6160   else DAC960_UserCritical("Illegal User Command: '%s'\n",
6161                            Controller, UserCommand);
6162
6163   spin_lock_irqsave(&Controller->queue_lock, flags);
6164   DAC960_DeallocateCommand(Command);
6165   spin_unlock_irqrestore(&Controller->queue_lock, flags);
6166   return true;
6167 }
6168
6169
6170 /*
6171   DAC960_V2_TranslatePhysicalDevice translates a Physical Device Channel and
6172   TargetID into a Logical Device.  It returns true on success and false
6173   on failure.
6174 */
6175
6176 static bool DAC960_V2_TranslatePhysicalDevice(DAC960_Command_T *Command,
6177                                                  unsigned char Channel,
6178                                                  unsigned char TargetID,
6179                                                  unsigned short
6180                                                    *LogicalDeviceNumber)
6181 {
6182   DAC960_V2_CommandMailbox_T SavedCommandMailbox, *CommandMailbox;
6183   DAC960_Controller_T *Controller =  Command->Controller;
6184
6185   CommandMailbox = &Command->V2.CommandMailbox;
6186   memcpy(&SavedCommandMailbox, CommandMailbox,
6187          sizeof(DAC960_V2_CommandMailbox_T));
6188
6189   CommandMailbox->PhysicalDeviceInfo.CommandOpcode = DAC960_V2_IOCTL;
6190   CommandMailbox->PhysicalDeviceInfo.CommandControlBits
6191                                     .DataTransferControllerToHost = true;
6192   CommandMailbox->PhysicalDeviceInfo.CommandControlBits
6193                                     .NoAutoRequestSense = true;
6194   CommandMailbox->PhysicalDeviceInfo.DataTransferSize =
6195     sizeof(DAC960_V2_PhysicalToLogicalDevice_T);
6196   CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.TargetID = TargetID;
6197   CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.Channel = Channel;
6198   CommandMailbox->PhysicalDeviceInfo.IOCTL_Opcode =
6199     DAC960_V2_TranslatePhysicalToLogicalDevice;
6200   CommandMailbox->Common.DataTransferMemoryAddress
6201                         .ScatterGatherSegments[0]
6202                         .SegmentDataPointer =
6203                 Controller->V2.PhysicalToLogicalDeviceDMA;
6204   CommandMailbox->Common.DataTransferMemoryAddress
6205                         .ScatterGatherSegments[0]
6206                         .SegmentByteCount =
6207                 CommandMailbox->Common.DataTransferSize;
6208
6209   DAC960_ExecuteCommand(Command);
6210   *LogicalDeviceNumber = Controller->V2.PhysicalToLogicalDevice->LogicalDeviceNumber;
6211
6212   memcpy(CommandMailbox, &SavedCommandMailbox,
6213          sizeof(DAC960_V2_CommandMailbox_T));
6214   return (Command->V2.CommandStatus == DAC960_V2_NormalCompletion);
6215 }
6216
6217
6218 /*
6219   DAC960_V2_ExecuteUserCommand executes a User Command for DAC960 V2 Firmware
6220   Controllers.
6221 */
6222
6223 static bool DAC960_V2_ExecuteUserCommand(DAC960_Controller_T *Controller,
6224                                             unsigned char *UserCommand)
6225 {
6226   DAC960_Command_T *Command;
6227   DAC960_V2_CommandMailbox_T *CommandMailbox;
6228   unsigned long flags;
6229   unsigned char Channel, TargetID, LogicalDriveNumber;
6230   unsigned short LogicalDeviceNumber;
6231
6232   spin_lock_irqsave(&Controller->queue_lock, flags);
6233   while ((Command = DAC960_AllocateCommand(Controller)) == NULL)
6234     DAC960_WaitForCommand(Controller);
6235   spin_unlock_irqrestore(&Controller->queue_lock, flags);
6236   Controller->UserStatusLength = 0;
6237   DAC960_V2_ClearCommand(Command);
6238   Command->CommandType = DAC960_ImmediateCommand;
6239   CommandMailbox = &Command->V2.CommandMailbox;
6240   CommandMailbox->Common.CommandOpcode = DAC960_V2_IOCTL;
6241   CommandMailbox->Common.CommandControlBits.DataTransferControllerToHost = true;
6242   CommandMailbox->Common.CommandControlBits.NoAutoRequestSense = true;
6243   if (strcmp(UserCommand, "flush-cache") == 0)
6244     {
6245       CommandMailbox->DeviceOperation.IOCTL_Opcode = DAC960_V2_PauseDevice;
6246       CommandMailbox->DeviceOperation.OperationDevice =
6247         DAC960_V2_RAID_Controller;
6248       DAC960_ExecuteCommand(Command);
6249       DAC960_UserCritical("Cache Flush Completed\n", Controller);
6250     }
6251   else if (strncmp(UserCommand, "kill", 4) == 0 &&
6252            DAC960_ParsePhysicalDevice(Controller, &UserCommand[4],
6253                                       &Channel, &TargetID) &&
6254            DAC960_V2_TranslatePhysicalDevice(Command, Channel, TargetID,
6255                                              &LogicalDeviceNumber))
6256     {
6257       CommandMailbox->SetDeviceState.LogicalDevice.LogicalDeviceNumber =
6258         LogicalDeviceNumber;
6259       CommandMailbox->SetDeviceState.IOCTL_Opcode =
6260         DAC960_V2_SetDeviceState;
6261       CommandMailbox->SetDeviceState.DeviceState.PhysicalDeviceState =
6262         DAC960_V2_Device_Dead;
6263       DAC960_ExecuteCommand(Command);
6264       DAC960_UserCritical("Kill of Physical Device %d:%d %s\n",
6265                           Controller, Channel, TargetID,
6266                           (Command->V2.CommandStatus
6267                            == DAC960_V2_NormalCompletion
6268                            ? "Succeeded" : "Failed"));
6269     }
6270   else if (strncmp(UserCommand, "make-online", 11) == 0 &&
6271            DAC960_ParsePhysicalDevice(Controller, &UserCommand[11],
6272                                       &Channel, &TargetID) &&
6273            DAC960_V2_TranslatePhysicalDevice(Command, Channel, TargetID,
6274                                              &LogicalDeviceNumber))
6275     {
6276       CommandMailbox->SetDeviceState.LogicalDevice.LogicalDeviceNumber =
6277         LogicalDeviceNumber;
6278       CommandMailbox->SetDeviceState.IOCTL_Opcode =
6279         DAC960_V2_SetDeviceState;
6280       CommandMailbox->SetDeviceState.DeviceState.PhysicalDeviceState =
6281         DAC960_V2_Device_Online;
6282       DAC960_ExecuteCommand(Command);
6283       DAC960_UserCritical("Make Online of Physical Device %d:%d %s\n",
6284                           Controller, Channel, TargetID,
6285                           (Command->V2.CommandStatus
6286                            == DAC960_V2_NormalCompletion
6287                            ? "Succeeded" : "Failed"));
6288     }
6289   else if (strncmp(UserCommand, "make-standby", 12) == 0 &&
6290            DAC960_ParsePhysicalDevice(Controller, &UserCommand[12],
6291                                       &Channel, &TargetID) &&
6292            DAC960_V2_TranslatePhysicalDevice(Command, Channel, TargetID,
6293                                              &LogicalDeviceNumber))
6294     {
6295       CommandMailbox->SetDeviceState.LogicalDevice.LogicalDeviceNumber =
6296         LogicalDeviceNumber;
6297       CommandMailbox->SetDeviceState.IOCTL_Opcode =
6298         DAC960_V2_SetDeviceState;
6299       CommandMailbox->SetDeviceState.DeviceState.PhysicalDeviceState =
6300         DAC960_V2_Device_Standby;
6301       DAC960_ExecuteCommand(Command);
6302       DAC960_UserCritical("Make Standby of Physical Device %d:%d %s\n",
6303                           Controller, Channel, TargetID,
6304                           (Command->V2.CommandStatus
6305                            == DAC960_V2_NormalCompletion
6306                            ? "Succeeded" : "Failed"));
6307     }
6308   else if (strncmp(UserCommand, "rebuild", 7) == 0 &&
6309            DAC960_ParsePhysicalDevice(Controller, &UserCommand[7],
6310                                       &Channel, &TargetID) &&
6311            DAC960_V2_TranslatePhysicalDevice(Command, Channel, TargetID,
6312                                              &LogicalDeviceNumber))
6313     {
6314       CommandMailbox->LogicalDeviceInfo.LogicalDevice.LogicalDeviceNumber =
6315         LogicalDeviceNumber;
6316       CommandMailbox->LogicalDeviceInfo.IOCTL_Opcode =
6317         DAC960_V2_RebuildDeviceStart;
6318       DAC960_ExecuteCommand(Command);
6319       DAC960_UserCritical("Rebuild of Physical Device %d:%d %s\n",
6320                           Controller, Channel, TargetID,
6321                           (Command->V2.CommandStatus
6322                            == DAC960_V2_NormalCompletion
6323                            ? "Initiated" : "Not Initiated"));
6324     }
6325   else if (strncmp(UserCommand, "cancel-rebuild", 14) == 0 &&
6326            DAC960_ParsePhysicalDevice(Controller, &UserCommand[14],
6327                                       &Channel, &TargetID) &&
6328            DAC960_V2_TranslatePhysicalDevice(Command, Channel, TargetID,
6329                                              &LogicalDeviceNumber))
6330     {
6331       CommandMailbox->LogicalDeviceInfo.LogicalDevice.LogicalDeviceNumber =
6332         LogicalDeviceNumber;
6333       CommandMailbox->LogicalDeviceInfo.IOCTL_Opcode =
6334         DAC960_V2_RebuildDeviceStop;
6335       DAC960_ExecuteCommand(Command);
6336       DAC960_UserCritical("Rebuild of Physical Device %d:%d %s\n",
6337                           Controller, Channel, TargetID,
6338                           (Command->V2.CommandStatus
6339                            == DAC960_V2_NormalCompletion
6340                            ? "Cancelled" : "Not Cancelled"));
6341     }
6342   else if (strncmp(UserCommand, "check-consistency", 17) == 0 &&
6343            DAC960_ParseLogicalDrive(Controller, &UserCommand[17],
6344                                     &LogicalDriveNumber))
6345     {
6346       CommandMailbox->ConsistencyCheck.LogicalDevice.LogicalDeviceNumber =
6347         LogicalDriveNumber;
6348       CommandMailbox->ConsistencyCheck.IOCTL_Opcode =
6349         DAC960_V2_ConsistencyCheckStart;
6350       CommandMailbox->ConsistencyCheck.RestoreConsistency = true;
6351       CommandMailbox->ConsistencyCheck.InitializedAreaOnly = false;
6352       DAC960_ExecuteCommand(Command);
6353       DAC960_UserCritical("Consistency Check of Logical Drive %d "
6354                           "(/dev/rd/c%dd%d) %s\n",
6355                           Controller, LogicalDriveNumber,
6356                           Controller->ControllerNumber,
6357                           LogicalDriveNumber,
6358                           (Command->V2.CommandStatus
6359                            == DAC960_V2_NormalCompletion
6360                            ? "Initiated" : "Not Initiated"));
6361     }
6362   else if (strncmp(UserCommand, "cancel-consistency-check", 24) == 0 &&
6363            DAC960_ParseLogicalDrive(Controller, &UserCommand[24],
6364                                     &LogicalDriveNumber))
6365     {
6366       CommandMailbox->ConsistencyCheck.LogicalDevice.LogicalDeviceNumber =
6367         LogicalDriveNumber;
6368       CommandMailbox->ConsistencyCheck.IOCTL_Opcode =
6369         DAC960_V2_ConsistencyCheckStop;
6370       DAC960_ExecuteCommand(Command);
6371       DAC960_UserCritical("Consistency Check of Logical Drive %d "
6372                           "(/dev/rd/c%dd%d) %s\n",
6373                           Controller, LogicalDriveNumber,
6374                           Controller->ControllerNumber,
6375                           LogicalDriveNumber,
6376                           (Command->V2.CommandStatus
6377                            == DAC960_V2_NormalCompletion
6378                            ? "Cancelled" : "Not Cancelled"));
6379     }
6380   else if (strcmp(UserCommand, "perform-discovery") == 0)
6381     {
6382       CommandMailbox->Common.IOCTL_Opcode = DAC960_V2_StartDiscovery;
6383       DAC960_ExecuteCommand(Command);
6384       DAC960_UserCritical("Discovery %s\n", Controller,
6385                           (Command->V2.CommandStatus
6386                            == DAC960_V2_NormalCompletion
6387                            ? "Initiated" : "Not Initiated"));
6388       if (Command->V2.CommandStatus == DAC960_V2_NormalCompletion)
6389         {
6390           CommandMailbox->ControllerInfo.CommandOpcode = DAC960_V2_IOCTL;
6391           CommandMailbox->ControllerInfo.CommandControlBits
6392                                         .DataTransferControllerToHost = true;
6393           CommandMailbox->ControllerInfo.CommandControlBits
6394                                         .NoAutoRequestSense = true;
6395           CommandMailbox->ControllerInfo.DataTransferSize =
6396             sizeof(DAC960_V2_ControllerInfo_T);
6397           CommandMailbox->ControllerInfo.ControllerNumber = 0;
6398           CommandMailbox->ControllerInfo.IOCTL_Opcode =
6399             DAC960_V2_GetControllerInfo;
6400           /*
6401            * How does this NOT race with the queued Monitoring
6402            * usage of this structure?
6403            */
6404           CommandMailbox->ControllerInfo.DataTransferMemoryAddress
6405                                         .ScatterGatherSegments[0]
6406                                         .SegmentDataPointer =
6407             Controller->V2.NewControllerInformationDMA;
6408           CommandMailbox->ControllerInfo.DataTransferMemoryAddress
6409                                         .ScatterGatherSegments[0]
6410                                         .SegmentByteCount =
6411             CommandMailbox->ControllerInfo.DataTransferSize;
6412           DAC960_ExecuteCommand(Command);
6413           while (Controller->V2.NewControllerInformation->PhysicalScanActive)
6414             {
6415               DAC960_ExecuteCommand(Command);
6416               sleep_on_timeout(&Controller->CommandWaitQueue, HZ);
6417             }
6418           DAC960_UserCritical("Discovery Completed\n", Controller);
6419         }
6420     }
6421   else if (strcmp(UserCommand, "suppress-enclosure-messages") == 0)
6422     Controller->SuppressEnclosureMessages = true;
6423   else DAC960_UserCritical("Illegal User Command: '%s'\n",
6424                            Controller, UserCommand);
6425
6426   spin_lock_irqsave(&Controller->queue_lock, flags);
6427   DAC960_DeallocateCommand(Command);
6428   spin_unlock_irqrestore(&Controller->queue_lock, flags);
6429   return true;
6430 }
6431
6432 static int dac960_proc_show(struct seq_file *m, void *v)
6433 {
6434   unsigned char *StatusMessage = "OK\n";
6435   int ControllerNumber;
6436   for (ControllerNumber = 0;
6437        ControllerNumber < DAC960_ControllerCount;
6438        ControllerNumber++)
6439     {
6440       DAC960_Controller_T *Controller = DAC960_Controllers[ControllerNumber];
6441       if (Controller == NULL) continue;
6442       if (Controller->MonitoringAlertMode)
6443         {
6444           StatusMessage = "ALERT\n";
6445           break;
6446         }
6447     }
6448   seq_puts(m, StatusMessage);
6449   return 0;
6450 }
6451
6452 static int dac960_proc_open(struct inode *inode, struct file *file)
6453 {
6454         return single_open(file, dac960_proc_show, NULL);
6455 }
6456
6457 static const struct file_operations dac960_proc_fops = {
6458         .owner          = THIS_MODULE,
6459         .open           = dac960_proc_open,
6460         .read           = seq_read,
6461         .llseek         = seq_lseek,
6462         .release        = single_release,
6463 };
6464
6465 static int dac960_initial_status_proc_show(struct seq_file *m, void *v)
6466 {
6467         DAC960_Controller_T *Controller = (DAC960_Controller_T *)m->private;
6468         seq_printf(m, "%.*s", Controller->InitialStatusLength, Controller->CombinedStatusBuffer);
6469         return 0;
6470 }
6471
6472 static int dac960_initial_status_proc_open(struct inode *inode, struct file *file)
6473 {
6474         return single_open(file, dac960_initial_status_proc_show, PDE(inode)->data);
6475 }
6476
6477 static const struct file_operations dac960_initial_status_proc_fops = {
6478         .owner          = THIS_MODULE,
6479         .open           = dac960_initial_status_proc_open,
6480         .read           = seq_read,
6481         .llseek         = seq_lseek,
6482         .release        = single_release,
6483 };
6484
6485 static int dac960_current_status_proc_show(struct seq_file *m, void *v)
6486 {
6487   DAC960_Controller_T *Controller = (DAC960_Controller_T *) m->private;
6488   unsigned char *StatusMessage =
6489     "No Rebuild or Consistency Check in Progress\n";
6490   int ProgressMessageLength = strlen(StatusMessage);
6491   if (jiffies != Controller->LastCurrentStatusTime)
6492     {
6493       Controller->CurrentStatusLength = 0;
6494       DAC960_AnnounceDriver(Controller);
6495       DAC960_ReportControllerConfiguration(Controller);
6496       DAC960_ReportDeviceConfiguration(Controller);
6497       if (Controller->ProgressBufferLength > 0)
6498         ProgressMessageLength = Controller->ProgressBufferLength;
6499       if (DAC960_CheckStatusBuffer(Controller, 2 + ProgressMessageLength))
6500         {
6501           unsigned char *CurrentStatusBuffer = Controller->CurrentStatusBuffer;
6502           CurrentStatusBuffer[Controller->CurrentStatusLength++] = ' ';
6503           CurrentStatusBuffer[Controller->CurrentStatusLength++] = ' ';
6504           if (Controller->ProgressBufferLength > 0)
6505             strcpy(&CurrentStatusBuffer[Controller->CurrentStatusLength],
6506                    Controller->ProgressBuffer);
6507           else
6508             strcpy(&CurrentStatusBuffer[Controller->CurrentStatusLength],
6509                    StatusMessage);
6510           Controller->CurrentStatusLength += ProgressMessageLength;
6511         }
6512       Controller->LastCurrentStatusTime = jiffies;
6513     }
6514         seq_printf(m, "%.*s", Controller->CurrentStatusLength, Controller->CurrentStatusBuffer);
6515         return 0;
6516 }
6517
6518 static int dac960_current_status_proc_open(struct inode *inode, struct file *file)
6519 {
6520         return single_open(file, dac960_current_status_proc_show, PDE(inode)->data);
6521 }
6522
6523 static const struct file_operations dac960_current_status_proc_fops = {
6524         .owner          = THIS_MODULE,
6525         .open           = dac960_current_status_proc_open,
6526         .read           = seq_read,
6527         .llseek         = seq_lseek,
6528         .release        = single_release,
6529 };
6530
6531 static int dac960_user_command_proc_show(struct seq_file *m, void *v)
6532 {
6533         DAC960_Controller_T *Controller = (DAC960_Controller_T *)m->private;
6534
6535         seq_printf(m, "%.*s", Controller->UserStatusLength, Controller->UserStatusBuffer);
6536         return 0;
6537 }
6538
6539 static int dac960_user_command_proc_open(struct inode *inode, struct file *file)
6540 {
6541         return single_open(file, dac960_user_command_proc_show, PDE(inode)->data);
6542 }
6543
6544 static ssize_t dac960_user_command_proc_write(struct file *file,
6545                                        const char __user *Buffer,
6546                                        size_t Count, loff_t *pos)
6547 {
6548   DAC960_Controller_T *Controller = (DAC960_Controller_T *) PDE(file->f_path.dentry->d_inode)->data;
6549   unsigned char CommandBuffer[80];
6550   int Length;
6551   if (Count > sizeof(CommandBuffer)-1) return -EINVAL;
6552   if (copy_from_user(CommandBuffer, Buffer, Count)) return -EFAULT;
6553   CommandBuffer[Count] = '\0';
6554   Length = strlen(CommandBuffer);
6555   if (Length > 0 && CommandBuffer[Length-1] == '\n')
6556     CommandBuffer[--Length] = '\0';
6557   if (Controller->FirmwareType == DAC960_V1_Controller)
6558     return (DAC960_V1_ExecuteUserCommand(Controller, CommandBuffer)
6559             ? Count : -EBUSY);
6560   else
6561     return (DAC960_V2_ExecuteUserCommand(Controller, CommandBuffer)
6562             ? Count : -EBUSY);
6563 }
6564
6565 static const struct file_operations dac960_user_command_proc_fops = {
6566         .owner          = THIS_MODULE,
6567         .open           = dac960_user_command_proc_open,
6568         .read           = seq_read,
6569         .llseek         = seq_lseek,
6570         .release        = single_release,
6571         .write          = dac960_user_command_proc_write,
6572 };
6573
6574 /*
6575   DAC960_CreateProcEntries creates the /proc/rd/... entries for the
6576   DAC960 Driver.
6577 */
6578
6579 static void DAC960_CreateProcEntries(DAC960_Controller_T *Controller)
6580 {
6581         struct proc_dir_entry *StatusProcEntry;
6582         struct proc_dir_entry *ControllerProcEntry;
6583         struct proc_dir_entry *UserCommandProcEntry;
6584
6585         if (DAC960_ProcDirectoryEntry == NULL) {
6586                 DAC960_ProcDirectoryEntry = proc_mkdir("rd", NULL);
6587                 StatusProcEntry = proc_create("status", 0,
6588                                            DAC960_ProcDirectoryEntry,
6589                                            &dac960_proc_fops);
6590         }
6591
6592       sprintf(Controller->ControllerName, "c%d", Controller->ControllerNumber);
6593       ControllerProcEntry = proc_mkdir(Controller->ControllerName,
6594                                        DAC960_ProcDirectoryEntry);
6595       proc_create_data("initial_status", 0, ControllerProcEntry, &dac960_initial_status_proc_fops, Controller);
6596       proc_create_data("current_status", 0, ControllerProcEntry, &dac960_current_status_proc_fops, Controller);
6597       UserCommandProcEntry = proc_create_data("user_command", S_IWUSR | S_IRUSR, ControllerProcEntry, &dac960_user_command_proc_fops, Controller);
6598       Controller->ControllerProcEntry = ControllerProcEntry;
6599 }
6600
6601
6602 /*
6603   DAC960_DestroyProcEntries destroys the /proc/rd/... entries for the
6604   DAC960 Driver.
6605 */
6606
6607 static void DAC960_DestroyProcEntries(DAC960_Controller_T *Controller)
6608 {
6609       if (Controller->ControllerProcEntry == NULL)
6610               return;
6611       remove_proc_entry("initial_status", Controller->ControllerProcEntry);
6612       remove_proc_entry("current_status", Controller->ControllerProcEntry);
6613       remove_proc_entry("user_command", Controller->ControllerProcEntry);
6614       remove_proc_entry(Controller->ControllerName, DAC960_ProcDirectoryEntry);
6615       Controller->ControllerProcEntry = NULL;
6616 }
6617
6618 #ifdef DAC960_GAM_MINOR
6619
6620 /*
6621  * DAC960_gam_ioctl is the ioctl function for performing RAID operations.
6622 */
6623
6624 static long DAC960_gam_ioctl(struct file *file, unsigned int Request,
6625                                                 unsigned long Argument)
6626 {
6627   long ErrorCode = 0;
6628   if (!capable(CAP_SYS_ADMIN)) return -EACCES;
6629
6630   mutex_lock(&DAC960_mutex);
6631   switch (Request)
6632     {
6633     case DAC960_IOCTL_GET_CONTROLLER_COUNT:
6634       ErrorCode = DAC960_ControllerCount;
6635       break;
6636     case DAC960_IOCTL_GET_CONTROLLER_INFO:
6637       {
6638         DAC960_ControllerInfo_T __user *UserSpaceControllerInfo =
6639           (DAC960_ControllerInfo_T __user *) Argument;
6640         DAC960_ControllerInfo_T ControllerInfo;
6641         DAC960_Controller_T *Controller;
6642         int ControllerNumber;
6643         if (UserSpaceControllerInfo == NULL)
6644                 ErrorCode = -EINVAL;
6645         else ErrorCode = get_user(ControllerNumber,
6646                              &UserSpaceControllerInfo->ControllerNumber);
6647         if (ErrorCode != 0)
6648                 break;
6649         ErrorCode = -ENXIO;
6650         if (ControllerNumber < 0 ||
6651             ControllerNumber > DAC960_ControllerCount - 1) {
6652           break;
6653         }
6654         Controller = DAC960_Controllers[ControllerNumber];
6655         if (Controller == NULL)
6656                 break;
6657         memset(&ControllerInfo, 0, sizeof(DAC960_ControllerInfo_T));
6658         ControllerInfo.ControllerNumber = ControllerNumber;
6659         ControllerInfo.FirmwareType = Controller->FirmwareType;
6660         ControllerInfo.Channels = Controller->Channels;
6661         ControllerInfo.Targets = Controller->Targets;
6662         ControllerInfo.PCI_Bus = Controller->Bus;
6663         ControllerInfo.PCI_Device = Controller->Device;
6664         ControllerInfo.PCI_Function = Controller->Function;
6665         ControllerInfo.IRQ_Channel = Controller->IRQ_Channel;
6666         ControllerInfo.PCI_Address = Controller->PCI_Address;
6667         strcpy(ControllerInfo.ModelName, Controller->ModelName);
6668         strcpy(ControllerInfo.FirmwareVersion, Controller->FirmwareVersion);
6669         ErrorCode = (copy_to_user(UserSpaceControllerInfo, &ControllerInfo,
6670                              sizeof(DAC960_ControllerInfo_T)) ? -EFAULT : 0);
6671         break;
6672       }
6673     case DAC960_IOCTL_V1_EXECUTE_COMMAND:
6674       {
6675         DAC960_V1_UserCommand_T __user *UserSpaceUserCommand =
6676           (DAC960_V1_UserCommand_T __user *) Argument;
6677         DAC960_V1_UserCommand_T UserCommand;
6678         DAC960_Controller_T *Controller;
6679         DAC960_Command_T *Command = NULL;
6680         DAC960_V1_CommandOpcode_T CommandOpcode;
6681         DAC960_V1_CommandStatus_T CommandStatus;
6682         DAC960_V1_DCDB_T DCDB;
6683         DAC960_V1_DCDB_T *DCDB_IOBUF = NULL;
6684         dma_addr_t      DCDB_IOBUFDMA;
6685         unsigned long flags;
6686         int ControllerNumber, DataTransferLength;
6687         unsigned char *DataTransferBuffer = NULL;
6688         dma_addr_t DataTransferBufferDMA;
6689         if (UserSpaceUserCommand == NULL) {
6690                 ErrorCode = -EINVAL;
6691                 break;
6692         }
6693         if (copy_from_user(&UserCommand, UserSpaceUserCommand,
6694                                    sizeof(DAC960_V1_UserCommand_T))) {
6695                 ErrorCode = -EFAULT;
6696                 break;
6697         }
6698         ControllerNumber = UserCommand.ControllerNumber;
6699         ErrorCode = -ENXIO;
6700         if (ControllerNumber < 0 ||
6701             ControllerNumber > DAC960_ControllerCount - 1)
6702                 break;
6703         Controller = DAC960_Controllers[ControllerNumber];
6704         if (Controller == NULL)
6705                 break;
6706         ErrorCode = -EINVAL;
6707         if (Controller->FirmwareType != DAC960_V1_Controller)
6708                 break;
6709         CommandOpcode = UserCommand.CommandMailbox.Common.CommandOpcode;
6710         DataTransferLength = UserCommand.DataTransferLength;
6711         if (CommandOpcode & 0x80)
6712                 break;
6713         if (CommandOpcode == DAC960_V1_DCDB)
6714           {
6715             if (copy_from_user(&DCDB, UserCommand.DCDB,
6716                                sizeof(DAC960_V1_DCDB_T))) {
6717                 ErrorCode = -EFAULT;
6718                 break;
6719             }
6720             if (DCDB.Channel >= DAC960_V1_MaxChannels)
6721                         break;
6722             if (!((DataTransferLength == 0 &&
6723                    DCDB.Direction
6724                    == DAC960_V1_DCDB_NoDataTransfer) ||
6725                   (DataTransferLength > 0 &&
6726                    DCDB.Direction
6727                    == DAC960_V1_DCDB_DataTransferDeviceToSystem) ||
6728                   (DataTransferLength < 0 &&
6729                    DCDB.Direction
6730                    == DAC960_V1_DCDB_DataTransferSystemToDevice)))
6731                         break;
6732             if (((DCDB.TransferLengthHigh4 << 16) | DCDB.TransferLength)
6733                 != abs(DataTransferLength))
6734                         break;
6735             DCDB_IOBUF = pci_alloc_consistent(Controller->PCIDevice,
6736                         sizeof(DAC960_V1_DCDB_T), &DCDB_IOBUFDMA);
6737             if (DCDB_IOBUF == NULL) {
6738                         ErrorCode = -ENOMEM;
6739                         break;
6740                 }
6741           }
6742         ErrorCode = -ENOMEM;
6743         if (DataTransferLength > 0)
6744           {
6745             DataTransferBuffer = pci_alloc_consistent(Controller->PCIDevice,
6746                                 DataTransferLength, &DataTransferBufferDMA);
6747             if (DataTransferBuffer == NULL)
6748                 break;
6749             memset(DataTransferBuffer, 0, DataTransferLength);
6750           }
6751         else if (DataTransferLength < 0)
6752           {
6753             DataTransferBuffer = pci_alloc_consistent(Controller->PCIDevice,
6754                                 -DataTransferLength, &DataTransferBufferDMA);
6755             if (DataTransferBuffer == NULL)
6756                 break;
6757             if (copy_from_user(DataTransferBuffer,
6758                                UserCommand.DataTransferBuffer,
6759                                -DataTransferLength)) {
6760                 ErrorCode = -EFAULT;
6761                 break;
6762             }
6763           }
6764         if (CommandOpcode == DAC960_V1_DCDB)
6765           {
6766             spin_lock_irqsave(&Controller->queue_lock, flags);
6767             while ((Command = DAC960_AllocateCommand(Controller)) == NULL)
6768               DAC960_WaitForCommand(Controller);
6769             while (Controller->V1.DirectCommandActive[DCDB.Channel]
6770                                                      [DCDB.TargetID])
6771               {
6772                 spin_unlock_irq(&Controller->queue_lock);
6773                 __wait_event(Controller->CommandWaitQueue,
6774                              !Controller->V1.DirectCommandActive
6775                                              [DCDB.Channel][DCDB.TargetID]);
6776                 spin_lock_irq(&Controller->queue_lock);
6777               }
6778             Controller->V1.DirectCommandActive[DCDB.Channel]
6779                                               [DCDB.TargetID] = true;
6780             spin_unlock_irqrestore(&Controller->queue_lock, flags);
6781             DAC960_V1_ClearCommand(Command);
6782             Command->CommandType = DAC960_ImmediateCommand;
6783             memcpy(&Command->V1.CommandMailbox, &UserCommand.CommandMailbox,
6784                    sizeof(DAC960_V1_CommandMailbox_T));
6785             Command->V1.CommandMailbox.Type3.BusAddress = DCDB_IOBUFDMA;
6786             DCDB.BusAddress = DataTransferBufferDMA;
6787             memcpy(DCDB_IOBUF, &DCDB, sizeof(DAC960_V1_DCDB_T));
6788           }
6789         else
6790           {
6791             spin_lock_irqsave(&Controller->queue_lock, flags);
6792             while ((Command = DAC960_AllocateCommand(Controller)) == NULL)
6793               DAC960_WaitForCommand(Controller);
6794             spin_unlock_irqrestore(&Controller->queue_lock, flags);
6795             DAC960_V1_ClearCommand(Command);
6796             Command->CommandType = DAC960_ImmediateCommand;
6797             memcpy(&Command->V1.CommandMailbox, &UserCommand.CommandMailbox,
6798                    sizeof(DAC960_V1_CommandMailbox_T));
6799             if (DataTransferBuffer != NULL)
6800               Command->V1.CommandMailbox.Type3.BusAddress =
6801                 DataTransferBufferDMA;
6802           }
6803         DAC960_ExecuteCommand(Command);
6804         CommandStatus = Command->V1.CommandStatus;
6805         spin_lock_irqsave(&Controller->queue_lock, flags);
6806         DAC960_DeallocateCommand(Command);
6807         spin_unlock_irqrestore(&Controller->queue_lock, flags);
6808         if (DataTransferLength > 0)
6809           {
6810             if (copy_to_user(UserCommand.DataTransferBuffer,
6811                              DataTransferBuffer, DataTransferLength)) {
6812                 ErrorCode = -EFAULT;
6813                 goto Failure1;
6814             }
6815           }
6816         if (CommandOpcode == DAC960_V1_DCDB)
6817           {
6818             /*
6819               I don't believe Target or Channel in the DCDB_IOBUF
6820               should be any different from the contents of DCDB.
6821              */
6822             Controller->V1.DirectCommandActive[DCDB.Channel]
6823                                               [DCDB.TargetID] = false;
6824             if (copy_to_user(UserCommand.DCDB, DCDB_IOBUF,
6825                              sizeof(DAC960_V1_DCDB_T))) {
6826                 ErrorCode = -EFAULT;
6827                 goto Failure1;
6828             }
6829           }
6830         ErrorCode = CommandStatus;
6831       Failure1:
6832         if (DataTransferBuffer != NULL)
6833           pci_free_consistent(Controller->PCIDevice, abs(DataTransferLength),
6834                         DataTransferBuffer, DataTransferBufferDMA);
6835         if (DCDB_IOBUF != NULL)
6836           pci_free_consistent(Controller->PCIDevice, sizeof(DAC960_V1_DCDB_T),
6837                         DCDB_IOBUF, DCDB_IOBUFDMA);
6838         break;
6839       }
6840     case DAC960_IOCTL_V2_EXECUTE_COMMAND:
6841       {
6842         DAC960_V2_UserCommand_T __user *UserSpaceUserCommand =
6843           (DAC960_V2_UserCommand_T __user *) Argument;
6844         DAC960_V2_UserCommand_T UserCommand;
6845         DAC960_Controller_T *Controller;
6846         DAC960_Command_T *Command = NULL;
6847         DAC960_V2_CommandMailbox_T *CommandMailbox;
6848         DAC960_V2_CommandStatus_T CommandStatus;
6849         unsigned long flags;
6850         int ControllerNumber, DataTransferLength;
6851         int DataTransferResidue, RequestSenseLength;
6852         unsigned char *DataTransferBuffer = NULL;
6853         dma_addr_t DataTransferBufferDMA;
6854         unsigned char *RequestSenseBuffer = NULL;
6855         dma_addr_t RequestSenseBufferDMA;
6856
6857         ErrorCode = -EINVAL;
6858         if (UserSpaceUserCommand == NULL)
6859                 break;
6860         if (copy_from_user(&UserCommand, UserSpaceUserCommand,
6861                            sizeof(DAC960_V2_UserCommand_T))) {
6862                 ErrorCode = -EFAULT;
6863                 break;
6864         }
6865         ErrorCode = -ENXIO;
6866         ControllerNumber = UserCommand.ControllerNumber;
6867         if (ControllerNumber < 0 ||
6868             ControllerNumber > DAC960_ControllerCount - 1)
6869                 break;
6870         Controller = DAC960_Controllers[ControllerNumber];
6871         if (Controller == NULL)
6872                 break;
6873         if (Controller->FirmwareType != DAC960_V2_Controller){
6874                 ErrorCode = -EINVAL;
6875                 break;
6876         }
6877         DataTransferLength = UserCommand.DataTransferLength;
6878         ErrorCode = -ENOMEM;
6879         if (DataTransferLength > 0)
6880           {
6881             DataTransferBuffer = pci_alloc_consistent(Controller->PCIDevice,
6882                                 DataTransferLength, &DataTransferBufferDMA);
6883             if (DataTransferBuffer == NULL)
6884                 break;
6885             memset(DataTransferBuffer, 0, DataTransferLength);
6886           }
6887         else if (DataTransferLength < 0)
6888           {
6889             DataTransferBuffer = pci_alloc_consistent(Controller->PCIDevice,
6890                                 -DataTransferLength, &DataTransferBufferDMA);
6891             if (DataTransferBuffer == NULL)
6892                 break;
6893             if (copy_from_user(DataTransferBuffer,
6894                                UserCommand.DataTransferBuffer,
6895                                -DataTransferLength)) {
6896                 ErrorCode = -EFAULT;
6897                 goto Failure2;
6898             }
6899           }
6900         RequestSenseLength = UserCommand.RequestSenseLength;
6901         if (RequestSenseLength > 0)
6902           {
6903             RequestSenseBuffer = pci_alloc_consistent(Controller->PCIDevice,
6904                         RequestSenseLength, &RequestSenseBufferDMA);
6905             if (RequestSenseBuffer == NULL)
6906               {
6907                 ErrorCode = -ENOMEM;
6908                 goto Failure2;
6909               }
6910             memset(RequestSenseBuffer, 0, RequestSenseLength);
6911           }
6912         spin_lock_irqsave(&Controller->queue_lock, flags);
6913         while ((Command = DAC960_AllocateCommand(Controller)) == NULL)
6914           DAC960_WaitForCommand(Controller);
6915         spin_unlock_irqrestore(&Controller->queue_lock, flags);
6916         DAC960_V2_ClearCommand(Command);
6917         Command->CommandType = DAC960_ImmediateCommand;
6918         CommandMailbox = &Command->V2.CommandMailbox;
6919         memcpy(CommandMailbox, &UserCommand.CommandMailbox,
6920                sizeof(DAC960_V2_CommandMailbox_T));
6921         CommandMailbox->Common.CommandControlBits
6922                               .AdditionalScatterGatherListMemory = false;
6923         CommandMailbox->Common.CommandControlBits
6924                               .NoAutoRequestSense = true;
6925         CommandMailbox->Common.DataTransferSize = 0;
6926         CommandMailbox->Common.DataTransferPageNumber = 0;
6927         memset(&CommandMailbox->Common.DataTransferMemoryAddress, 0,
6928                sizeof(DAC960_V2_DataTransferMemoryAddress_T));
6929         if (DataTransferLength != 0)
6930           {
6931             if (DataTransferLength > 0)
6932               {
6933                 CommandMailbox->Common.CommandControlBits
6934                                       .DataTransferControllerToHost = true;
6935                 CommandMailbox->Common.DataTransferSize = DataTransferLength;
6936               }
6937             else
6938               {
6939                 CommandMailbox->Common.CommandControlBits
6940                                       .DataTransferControllerToHost = false;
6941                 CommandMailbox->Common.DataTransferSize = -DataTransferLength;
6942               }
6943             CommandMailbox->Common.DataTransferMemoryAddress
6944                                   .ScatterGatherSegments[0]
6945                                   .SegmentDataPointer = DataTransferBufferDMA;
6946             CommandMailbox->Common.DataTransferMemoryAddress
6947                                   .ScatterGatherSegments[0]
6948                                   .SegmentByteCount =
6949               CommandMailbox->Common.DataTransferSize;
6950           }
6951         if (RequestSenseLength > 0)
6952           {
6953             CommandMailbox->Common.CommandControlBits
6954                                   .NoAutoRequestSense = false;
6955             CommandMailbox->Common.RequestSenseSize = RequestSenseLength;
6956             CommandMailbox->Common.RequestSenseBusAddress =
6957                                                         RequestSenseBufferDMA;
6958           }
6959         DAC960_ExecuteCommand(Command);
6960         CommandStatus = Command->V2.CommandStatus;
6961         RequestSenseLength = Command->V2.RequestSenseLength;
6962         DataTransferResidue = Command->V2.DataTransferResidue;
6963         spin_lock_irqsave(&Controller->queue_lock, flags);
6964         DAC960_DeallocateCommand(Command);
6965         spin_unlock_irqrestore(&Controller->queue_lock, flags);
6966         if (RequestSenseLength > UserCommand.RequestSenseLength)
6967           RequestSenseLength = UserCommand.RequestSenseLength;
6968         if (copy_to_user(&UserSpaceUserCommand->DataTransferLength,
6969                                  &DataTransferResidue,
6970                                  sizeof(DataTransferResidue))) {
6971                 ErrorCode = -EFAULT;
6972                 goto Failure2;
6973         }
6974         if (copy_to_user(&UserSpaceUserCommand->RequestSenseLength,
6975                          &RequestSenseLength, sizeof(RequestSenseLength))) {
6976                 ErrorCode = -EFAULT;
6977                 goto Failure2;
6978         }
6979         if (DataTransferLength > 0)
6980           {
6981             if (copy_to_user(UserCommand.DataTransferBuffer,
6982                              DataTransferBuffer, DataTransferLength)) {
6983                 ErrorCode = -EFAULT;
6984                 goto Failure2;
6985             }
6986           }
6987         if (RequestSenseLength > 0)
6988           {
6989             if (copy_to_user(UserCommand.RequestSenseBuffer,
6990                              RequestSenseBuffer, RequestSenseLength)) {
6991                 ErrorCode = -EFAULT;
6992                 goto Failure2;
6993             }
6994           }
6995         ErrorCode = CommandStatus;
6996       Failure2:
6997           pci_free_consistent(Controller->PCIDevice, abs(DataTransferLength),
6998                 DataTransferBuffer, DataTransferBufferDMA);
6999         if (RequestSenseBuffer != NULL)
7000           pci_free_consistent(Controller->PCIDevice, RequestSenseLength,
7001                 RequestSenseBuffer, RequestSenseBufferDMA);
7002         break;
7003       }
7004     case DAC960_IOCTL_V2_GET_HEALTH_STATUS:
7005       {
7006         DAC960_V2_GetHealthStatus_T __user *UserSpaceGetHealthStatus =
7007           (DAC960_V2_GetHealthStatus_T __user *) Argument;
7008         DAC960_V2_GetHealthStatus_T GetHealthStatus;
7009         DAC960_V2_HealthStatusBuffer_T HealthStatusBuffer;
7010         DAC960_Controller_T *Controller;
7011         int ControllerNumber;
7012         if (UserSpaceGetHealthStatus == NULL) {
7013                 ErrorCode = -EINVAL;
7014                 break;
7015         }
7016         if (copy_from_user(&GetHealthStatus, UserSpaceGetHealthStatus,
7017                            sizeof(DAC960_V2_GetHealthStatus_T))) {
7018                 ErrorCode = -EFAULT;
7019                 break;
7020         }
7021         ErrorCode = -ENXIO;
7022         ControllerNumber = GetHealthStatus.ControllerNumber;
7023         if (ControllerNumber < 0 ||
7024             ControllerNumber > DAC960_ControllerCount - 1)
7025                     break;
7026         Controller = DAC960_Controllers[ControllerNumber];
7027         if (Controller == NULL)
7028                 break;
7029         if (Controller->FirmwareType != DAC960_V2_Controller) {
7030                 ErrorCode = -EINVAL;
7031                 break;
7032         }
7033         if (copy_from_user(&HealthStatusBuffer,
7034                            GetHealthStatus.HealthStatusBuffer,
7035                            sizeof(DAC960_V2_HealthStatusBuffer_T))) {
7036                 ErrorCode = -EFAULT;
7037                 break;
7038         }
7039         while (Controller->V2.HealthStatusBuffer->StatusChangeCounter
7040                == HealthStatusBuffer.StatusChangeCounter &&
7041                Controller->V2.HealthStatusBuffer->NextEventSequenceNumber
7042                == HealthStatusBuffer.NextEventSequenceNumber)
7043           {
7044             interruptible_sleep_on_timeout(&Controller->HealthStatusWaitQueue,
7045                                            DAC960_MonitoringTimerInterval);
7046             if (signal_pending(current)) {
7047                 ErrorCode = -EINTR;
7048                 break;
7049             }
7050           }
7051         if (copy_to_user(GetHealthStatus.HealthStatusBuffer,
7052                          Controller->V2.HealthStatusBuffer,
7053                          sizeof(DAC960_V2_HealthStatusBuffer_T)))
7054                 ErrorCode = -EFAULT;
7055         else
7056                 ErrorCode =  0;
7057       }
7058       default:
7059         ErrorCode = -ENOTTY;
7060     }
7061   mutex_unlock(&DAC960_mutex);
7062   return ErrorCode;
7063 }
7064
7065 static const struct file_operations DAC960_gam_fops = {
7066         .owner          = THIS_MODULE,
7067         .unlocked_ioctl = DAC960_gam_ioctl,
7068         .llseek         = noop_llseek,
7069 };
7070
7071 static struct miscdevice DAC960_gam_dev = {
7072         DAC960_GAM_MINOR,
7073         "dac960_gam",
7074         &DAC960_gam_fops
7075 };
7076
7077 static int DAC960_gam_init(void)
7078 {
7079         int ret;
7080
7081         ret = misc_register(&DAC960_gam_dev);
7082         if (ret)
7083                 printk(KERN_ERR "DAC960_gam: can't misc_register on minor %d\n", DAC960_GAM_MINOR);
7084         return ret;
7085 }
7086
7087 static void DAC960_gam_cleanup(void)
7088 {
7089         misc_deregister(&DAC960_gam_dev);
7090 }
7091
7092 #endif /* DAC960_GAM_MINOR */
7093
7094 static struct DAC960_privdata DAC960_GEM_privdata = {
7095         .HardwareType =         DAC960_GEM_Controller,
7096         .FirmwareType   =       DAC960_V2_Controller,
7097         .InterruptHandler =     DAC960_GEM_InterruptHandler,
7098         .MemoryWindowSize =     DAC960_GEM_RegisterWindowSize,
7099 };
7100
7101
7102 static struct DAC960_privdata DAC960_BA_privdata = {
7103         .HardwareType =         DAC960_BA_Controller,
7104         .FirmwareType   =       DAC960_V2_Controller,
7105         .InterruptHandler =     DAC960_BA_InterruptHandler,
7106         .MemoryWindowSize =     DAC960_BA_RegisterWindowSize,
7107 };
7108
7109 static struct DAC960_privdata DAC960_LP_privdata = {
7110         .HardwareType =         DAC960_LP_Controller,
7111         .FirmwareType   =       DAC960_V2_Controller,
7112         .InterruptHandler =     DAC960_LP_InterruptHandler,
7113         .MemoryWindowSize =     DAC960_LP_RegisterWindowSize,
7114 };
7115
7116 static struct DAC960_privdata DAC960_LA_privdata = {
7117         .HardwareType =         DAC960_LA_Controller,
7118         .FirmwareType   =       DAC960_V1_Controller,
7119         .InterruptHandler =     DAC960_LA_InterruptHandler,
7120         .MemoryWindowSize =     DAC960_LA_RegisterWindowSize,
7121 };
7122
7123 static struct DAC960_privdata DAC960_PG_privdata = {
7124         .HardwareType =         DAC960_PG_Controller,
7125         .FirmwareType   =       DAC960_V1_Controller,
7126         .InterruptHandler =     DAC960_PG_InterruptHandler,
7127         .MemoryWindowSize =     DAC960_PG_RegisterWindowSize,
7128 };
7129
7130 static struct DAC960_privdata DAC960_PD_privdata = {
7131         .HardwareType =         DAC960_PD_Controller,
7132         .FirmwareType   =       DAC960_V1_Controller,
7133         .InterruptHandler =     DAC960_PD_InterruptHandler,
7134         .MemoryWindowSize =     DAC960_PD_RegisterWindowSize,
7135 };
7136
7137 static struct DAC960_privdata DAC960_P_privdata = {
7138         .HardwareType =         DAC960_P_Controller,
7139         .FirmwareType   =       DAC960_V1_Controller,
7140         .InterruptHandler =     DAC960_P_InterruptHandler,
7141         .MemoryWindowSize =     DAC960_PD_RegisterWindowSize,
7142 };
7143
7144 static const struct pci_device_id DAC960_id_table[] = {
7145         {
7146                 .vendor         = PCI_VENDOR_ID_MYLEX,
7147                 .device         = PCI_DEVICE_ID_MYLEX_DAC960_GEM,
7148                 .subvendor      = PCI_VENDOR_ID_MYLEX,
7149                 .subdevice      = PCI_ANY_ID,
7150                 .driver_data    = (unsigned long) &DAC960_GEM_privdata,
7151         },
7152         {
7153                 .vendor         = PCI_VENDOR_ID_MYLEX,
7154                 .device         = PCI_DEVICE_ID_MYLEX_DAC960_BA,
7155                 .subvendor      = PCI_ANY_ID,
7156                 .subdevice      = PCI_ANY_ID,
7157                 .driver_data    = (unsigned long) &DAC960_BA_privdata,
7158         },
7159         {
7160                 .vendor         = PCI_VENDOR_ID_MYLEX,
7161                 .device         = PCI_DEVICE_ID_MYLEX_DAC960_LP,
7162                 .subvendor      = PCI_ANY_ID,
7163                 .subdevice      = PCI_ANY_ID,
7164                 .driver_data    = (unsigned long) &DAC960_LP_privdata,
7165         },
7166         {
7167                 .vendor         = PCI_VENDOR_ID_DEC,
7168                 .device         = PCI_DEVICE_ID_DEC_21285,
7169                 .subvendor      = PCI_VENDOR_ID_MYLEX,
7170                 .subdevice      = PCI_DEVICE_ID_MYLEX_DAC960_LA,
7171                 .driver_data    = (unsigned long) &DAC960_LA_privdata,
7172         },
7173         {
7174                 .vendor         = PCI_VENDOR_ID_MYLEX,
7175                 .device         = PCI_DEVICE_ID_MYLEX_DAC960_PG,
7176                 .subvendor      = PCI_ANY_ID,
7177                 .subdevice      = PCI_ANY_ID,
7178                 .driver_data    = (unsigned long) &DAC960_PG_privdata,
7179         },
7180         {
7181                 .vendor         = PCI_VENDOR_ID_MYLEX,
7182                 .device         = PCI_DEVICE_ID_MYLEX_DAC960_PD,
7183                 .subvendor      = PCI_ANY_ID,
7184                 .subdevice      = PCI_ANY_ID,
7185                 .driver_data    = (unsigned long) &DAC960_PD_privdata,
7186         },
7187         {
7188                 .vendor         = PCI_VENDOR_ID_MYLEX,
7189                 .device         = PCI_DEVICE_ID_MYLEX_DAC960_P,
7190                 .subvendor      = PCI_ANY_ID,
7191                 .subdevice      = PCI_ANY_ID,
7192                 .driver_data    = (unsigned long) &DAC960_P_privdata,
7193         },
7194         {0, },
7195 };
7196
7197 MODULE_DEVICE_TABLE(pci, DAC960_id_table);
7198
7199 static struct pci_driver DAC960_pci_driver = {
7200         .name           = "DAC960",
7201         .id_table       = DAC960_id_table,
7202         .probe          = DAC960_Probe,
7203         .remove         = DAC960_Remove,
7204 };
7205
7206 static int __init DAC960_init_module(void)
7207 {
7208         int ret;
7209
7210         ret =  pci_register_driver(&DAC960_pci_driver);
7211 #ifdef DAC960_GAM_MINOR
7212         if (!ret)
7213                 DAC960_gam_init();
7214 #endif
7215         return ret;
7216 }
7217
7218 static void __exit DAC960_cleanup_module(void)
7219 {
7220         int i;
7221
7222 #ifdef DAC960_GAM_MINOR
7223         DAC960_gam_cleanup();
7224 #endif
7225
7226         for (i = 0; i < DAC960_ControllerCount; i++) {
7227                 DAC960_Controller_T *Controller = DAC960_Controllers[i];
7228                 if (Controller == NULL)
7229                         continue;
7230                 DAC960_FinalizeController(Controller);
7231         }
7232         if (DAC960_ProcDirectoryEntry != NULL) {
7233                 remove_proc_entry("rd/status", NULL);
7234                 remove_proc_entry("rd", NULL);
7235         }
7236         DAC960_ControllerCount = 0;
7237         pci_unregister_driver(&DAC960_pci_driver);
7238 }
7239
7240 module_init(DAC960_init_module);
7241 module_exit(DAC960_cleanup_module);
7242
7243 MODULE_LICENSE("GPL");