drivers/block/DAC960.c

   1 /*
   2
   3   Linux Driver for Mylex DAC960/AcceleRAID/eXtremeRAID PCI RAID Controllers
   4
   5   Copyright 1998-2001 by Leonard N. Zubkoff <lnz@dandelion.com>
   6   Portions Copyright 2002 by Mylex (An IBM Business Unit)
   7
   8   This program is free software; you may redistribute and/or modify it under
   9   the terms of the GNU General Public License Version 2 as published by the
  10   Free Software Foundation.
  11
  12   This program is distributed in the hope that it will be useful, but
  13   WITHOUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY
  14   or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
  15   for complete details.
  16
  17 */
  18
  19
  20 #define DAC960_DriverVersion                    "2.5.48"
  21 #define DAC960_DriverDate                       "14 May 2006"
  22
  23
  24 #include <linux/module.h>
  25 #include <linux/types.h>
  26 #include <linux/miscdevice.h>
  27 #include <linux/blkdev.h>
  28 #include <linux/bio.h>
  29 #include <linux/completion.h>
  30 #include <linux/delay.h>
  31 #include <linux/genhd.h>
  32 #include <linux/hdreg.h>
  33 #include <linux/blkpg.h>
  34 #include <linux/interrupt.h>
  35 #include <linux/ioport.h>
  36 #include <linux/mm.h>
  37 #include <linux/slab.h>
  38 #include <linux/proc_fs.h>
  39 #include <linux/reboot.h>
  40 #include <linux/spinlock.h>
  41 #include <linux/timer.h>
  42 #include <linux/pci.h>
  43 #include <linux/init.h>
  44 #include <linux/jiffies.h>
  45 #include <linux/random.h>
  46 #include <asm/io.h>
  47 #include <asm/uaccess.h>
  48 #include "DAC960.h"
  49
  50 #define DAC960_GAM_MINOR        252
  51
  52
  53 static DAC960_Controller_T *DAC960_Controllers[DAC960_MaxControllers];
  54 static int DAC960_ControllerCount;
  55 static struct proc_dir_entry *DAC960_ProcDirectoryEntry;
  56
  57 static long disk_size(DAC960_Controller_T *p, int drive_nr)
  58 {
  59         if (p->FirmwareType == DAC960_V1_Controller) {
  60                 if (drive_nr >= p->LogicalDriveCount)
  61                         return 0;
  62                 return p->V1.LogicalDriveInformation[drive_nr].
  63                         LogicalDriveSize;
  64         } else {
  65                 DAC960_V2_LogicalDeviceInfo_T *i =
  66                         p->V2.LogicalDeviceInformation[drive_nr];
  67                 if (i == NULL)
  68                         return 0;
  69                 return i->ConfigurableDeviceSize;
  70         }
  71 }
  72
  73 static int DAC960_open(struct inode *inode, struct file *file)
  74 {
  75         struct gendisk *disk = inode->i_bdev->bd_disk;
  76         DAC960_Controller_T *p = disk->queue->queuedata;
  77         int drive_nr = (long)disk->private_data;
  78
  79         if (p->FirmwareType == DAC960_V1_Controller) {
  80                 if (p->V1.LogicalDriveInformation[drive_nr].
  81                     LogicalDriveState == DAC960_V1_LogicalDrive_Offline)
  82                         return -ENXIO;
  83         } else {
  84                 DAC960_V2_LogicalDeviceInfo_T *i =
  85                         p->V2.LogicalDeviceInformation[drive_nr];
  86                 if (!i || i->LogicalDeviceState == DAC960_V2_LogicalDevice_Offline)
  87                         return -ENXIO;
  88         }
  89
  90         check_disk_change(inode->i_bdev);
  91
  92         if (!get_capacity(p->disks[drive_nr]))
  93                 return -ENXIO;
  94         return 0;
  95 }
  96
  97 static int DAC960_getgeo(struct block_device *bdev, struct hd_geometry *geo)
  98 {
  99         struct gendisk *disk = bdev->bd_disk;
 100         DAC960_Controller_T *p = disk->queue->queuedata;
 101         int drive_nr = (long)disk->private_data;
 102
 103         if (p->FirmwareType == DAC960_V1_Controller) {
 104                 geo->heads = p->V1.GeometryTranslationHeads;
 105                 geo->sectors = p->V1.GeometryTranslationSectors;
 106                 geo->cylinders = p->V1.LogicalDriveInformation[drive_nr].
 107                         LogicalDriveSize / (geo->heads * geo->sectors);
 108         } else {
 109                 DAC960_V2_LogicalDeviceInfo_T *i =
 110                         p->V2.LogicalDeviceInformation[drive_nr];
 111                 switch (i->DriveGeometry) {
 112                 case DAC960_V2_Geometry_128_32:
 113                         geo->heads = 128;
 114                         geo->sectors = 32;
 115                         break;
 116                 case DAC960_V2_Geometry_255_63:
 117                         geo->heads = 255;
 118                         geo->sectors = 63;
 119                         break;
 120                 default:
 121                         DAC960_Error("Illegal Logical Device Geometry %d\n",
 122                                         p, i->DriveGeometry);
 123                         return -EINVAL;
 124                 }
 125
 126                 geo->cylinders = i->ConfigurableDeviceSize /
 127                         (geo->heads * geo->sectors);
 128         }
 129
 130         return 0;
 131 }
 132
 133 static int DAC960_media_changed(struct gendisk *disk)
 134 {
 135         DAC960_Controller_T *p = disk->queue->queuedata;
 136         int drive_nr = (long)disk->private_data;
 137
 138         if (!p->LogicalDriveInitiallyAccessible[drive_nr])
 139                 return 1;
 140         return 0;
 141 }
 142
 143 static int DAC960_revalidate_disk(struct gendisk *disk)
 144 {
 145         DAC960_Controller_T *p = disk->queue->queuedata;
 146         int unit = (long)disk->private_data;
 147
 148         set_capacity(disk, disk_size(p, unit));
 149         return 0;
 150 }
 151
 152 static struct block_device_operations DAC960_BlockDeviceOperations = {
 153         .owner                  = THIS_MODULE,
 154         .open                   = DAC960_open,
 155         .getgeo                 = DAC960_getgeo,
 156         .media_changed          = DAC960_media_changed,
 157         .revalidate_disk        = DAC960_revalidate_disk,
 158 };
 159
 160
 161 /*
 162   DAC960_AnnounceDriver announces the Driver Version and Date, Author's Name,
 163   Copyright Notice, and Electronic Mail Address.
 164 */
 165
 166 static void DAC960_AnnounceDriver(DAC960_Controller_T *Controller)
 167 {
 168   DAC960_Announce("***** DAC960 RAID Driver Version "
 169                   DAC960_DriverVersion " of "
 170                   DAC960_DriverDate " *****\n", Controller);
 171   DAC960_Announce("Copyright 1998-2001 by Leonard N. Zubkoff "
 172                   "<lnz@dandelion.com>\n", Controller);
 173 }
 174
 175
 176 /*
 177   DAC960_Failure prints a standardized error message, and then returns false.
 178 */
 179
 180 static boolean DAC960_Failure(DAC960_Controller_T *Controller,
 181                               unsigned char *ErrorMessage)
 182 {
 183   DAC960_Error("While configuring DAC960 PCI RAID Controller at\n",
 184                Controller);
 185   if (Controller->IO_Address == 0)
 186     DAC960_Error("PCI Bus %d Device %d Function %d I/O Address N/A "
 187                  "PCI Address 0x%X\n", Controller,
 188                  Controller->Bus, Controller->Device,
 189                  Controller->Function, Controller->PCI_Address);
 190   else DAC960_Error("PCI Bus %d Device %d Function %d I/O Address "
 191                     "0x%X PCI Address 0x%X\n", Controller,
 192                     Controller->Bus, Controller->Device,
 193                     Controller->Function, Controller->IO_Address,
 194                     Controller->PCI_Address);
 195   DAC960_Error("%s FAILED - DETACHING\n", Controller, ErrorMessage);
 196   return false;
 197 }
 198
 199 /*
 200   init_dma_loaf() and slice_dma_loaf() are helper functions for
 201   aggregating the dma-mapped memory for a well-known collection of
 202   data structures that are of different lengths.
 203
 204   These routines don't guarantee any alignment.  The caller must
 205   include any space needed for alignment in the sizes of the structures
 206   that are passed in.
 207  */
 208
 209 static boolean init_dma_loaf(struct pci_dev *dev, struct dma_loaf *loaf,
 210                                                                  size_t len)
 211 {
 212         void *cpu_addr;
 213         dma_addr_t dma_handle;
 214
 215         cpu_addr = pci_alloc_consistent(dev, len, &dma_handle);
 216         if (cpu_addr == NULL)
 217                 return false;
 218
 219         loaf->cpu_free = loaf->cpu_base = cpu_addr;
 220         loaf->dma_free =loaf->dma_base = dma_handle;
 221         loaf->length = len;
 222         memset(cpu_addr, 0, len);
 223         return true;
 224 }
 225
 226 static void *slice_dma_loaf(struct dma_loaf *loaf, size_t len,
 227                                         dma_addr_t *dma_handle)
 228 {
 229         void *cpu_end = loaf->cpu_free + len;
 230         void *cpu_addr = loaf->cpu_free;
 231
 232         BUG_ON(cpu_end > loaf->cpu_base + loaf->length);
 233         *dma_handle = loaf->dma_free;
 234         loaf->cpu_free = cpu_end;
 235         loaf->dma_free += len;
 236         return cpu_addr;
 237 }
 238
 239 static void free_dma_loaf(struct pci_dev *dev, struct dma_loaf *loaf_handle)
 240 {
 241         if (loaf_handle->cpu_base != NULL)
 242                 pci_free_consistent(dev, loaf_handle->length,
 243                         loaf_handle->cpu_base, loaf_handle->dma_base);
 244 }
 245
 246
 247 /*
 248   DAC960_CreateAuxiliaryStructures allocates and initializes the auxiliary
 249   data structures for Controller.  It returns true on success and false on
 250   failure.
 251 */
 252
 253 static boolean DAC960_CreateAuxiliaryStructures(DAC960_Controller_T *Controller)
 254 {
 255   int CommandAllocationLength, CommandAllocationGroupSize;
 256   int CommandsRemaining = 0, CommandIdentifier, CommandGroupByteCount;
 257   void *AllocationPointer = NULL;
 258   void *ScatterGatherCPU = NULL;
 259   dma_addr_t ScatterGatherDMA;
 260   struct pci_pool *ScatterGatherPool;
 261   void *RequestSenseCPU = NULL;
 262   dma_addr_t RequestSenseDMA;
 263   struct pci_pool *RequestSensePool = NULL;
 264
 265   if (Controller->FirmwareType == DAC960_V1_Controller)
 266     {
 267       CommandAllocationLength = offsetof(DAC960_Command_T, V1.EndMarker);
 268       CommandAllocationGroupSize = DAC960_V1_CommandAllocationGroupSize;
 269       ScatterGatherPool = pci_pool_create("DAC960_V1_ScatterGather",
 270                 Controller->PCIDevice,
 271         DAC960_V1_ScatterGatherLimit * sizeof(DAC960_V1_ScatterGatherSegment_T),
 272         sizeof(DAC960_V1_ScatterGatherSegment_T), 0);
 273       if (ScatterGatherPool == NULL)
 274             return DAC960_Failure(Controller,
 275                         "AUXILIARY STRUCTURE CREATION (SG)");
 276       Controller->ScatterGatherPool = ScatterGatherPool;
 277     }
 278   else
 279     {
 280       CommandAllocationLength = offsetof(DAC960_Command_T, V2.EndMarker);
 281       CommandAllocationGroupSize = DAC960_V2_CommandAllocationGroupSize;
 282       ScatterGatherPool = pci_pool_create("DAC960_V2_ScatterGather",
 283                 Controller->PCIDevice,
 284         DAC960_V2_ScatterGatherLimit * sizeof(DAC960_V2_ScatterGatherSegment_T),
 285         sizeof(DAC960_V2_ScatterGatherSegment_T), 0);
 286       if (ScatterGatherPool == NULL)
 287             return DAC960_Failure(Controller,
 288                         "AUXILIARY STRUCTURE CREATION (SG)");
 289       RequestSensePool = pci_pool_create("DAC960_V2_RequestSense",
 290                 Controller->PCIDevice, sizeof(DAC960_SCSI_RequestSense_T),
 291                 sizeof(int), 0);
 292       if (RequestSensePool == NULL) {
 293             pci_pool_destroy(ScatterGatherPool);
 294             return DAC960_Failure(Controller,
 295                         "AUXILIARY STRUCTURE CREATION (SG)");
 296       }
 297       Controller->ScatterGatherPool = ScatterGatherPool;
 298       Controller->V2.RequestSensePool = RequestSensePool;
 299     }
 300   Controller->CommandAllocationGroupSize = CommandAllocationGroupSize;
 301   Controller->FreeCommands = NULL;
 302   for (CommandIdentifier = 1;
 303        CommandIdentifier <= Controller->DriverQueueDepth;
 304        CommandIdentifier++)
 305     {
 306       DAC960_Command_T *Command;
 307       if (--CommandsRemaining <= 0)
 308         {
 309           CommandsRemaining =
 310                 Controller->DriverQueueDepth - CommandIdentifier + 1;
 311           if (CommandsRemaining > CommandAllocationGroupSize)
 312                 CommandsRemaining = CommandAllocationGroupSize;
 313           CommandGroupByteCount =
 314                 CommandsRemaining * CommandAllocationLength;
 315           AllocationPointer = kzalloc(CommandGroupByteCount, GFP_ATOMIC);
 316           if (AllocationPointer == NULL)
 317                 return DAC960_Failure(Controller,
 318                                         "AUXILIARY STRUCTURE CREATION");
 319          }
 320       Command = (DAC960_Command_T *) AllocationPointer;
 321       AllocationPointer += CommandAllocationLength;
 322       Command->CommandIdentifier = CommandIdentifier;
 323       Command->Controller = Controller;
 324       Command->Next = Controller->FreeCommands;
 325       Controller->FreeCommands = Command;
 326       Controller->Commands[CommandIdentifier-1] = Command;
 327       ScatterGatherCPU = pci_pool_alloc(ScatterGatherPool, SLAB_ATOMIC,
 328                                                         &ScatterGatherDMA);
 329       if (ScatterGatherCPU == NULL)
 330           return DAC960_Failure(Controller, "AUXILIARY STRUCTURE CREATION");
 331
 332       if (RequestSensePool != NULL) {
 333           RequestSenseCPU = pci_pool_alloc(RequestSensePool, SLAB_ATOMIC,
 334                                                 &RequestSenseDMA);
 335           if (RequestSenseCPU == NULL) {
 336                 pci_pool_free(ScatterGatherPool, ScatterGatherCPU,
 337                                 ScatterGatherDMA);
 338                 return DAC960_Failure(Controller,
 339                                         "AUXILIARY STRUCTURE CREATION");
 340           }
 341         }
 342      if (Controller->FirmwareType == DAC960_V1_Controller) {
 343         Command->cmd_sglist = Command->V1.ScatterList;
 344         Command->V1.ScatterGatherList =
 345                 (DAC960_V1_ScatterGatherSegment_T *)ScatterGatherCPU;
 346         Command->V1.ScatterGatherListDMA = ScatterGatherDMA;
 347       } else {
 348         Command->cmd_sglist = Command->V2.ScatterList;
 349         Command->V2.ScatterGatherList =
 350                 (DAC960_V2_ScatterGatherSegment_T *)ScatterGatherCPU;
 351         Command->V2.ScatterGatherListDMA = ScatterGatherDMA;
 352         Command->V2.RequestSense =
 353                                 (DAC960_SCSI_RequestSense_T *)RequestSenseCPU;
 354         Command->V2.RequestSenseDMA = RequestSenseDMA;
 355       }
 356     }
 357   return true;
 358 }
 359
 360
 361 /*
 362   DAC960_DestroyAuxiliaryStructures deallocates the auxiliary data
 363   structures for Controller.
 364 */
 365
 366 static void DAC960_DestroyAuxiliaryStructures(DAC960_Controller_T *Controller)
 367 {
 368   int i;
 369   struct pci_pool *ScatterGatherPool = Controller->ScatterGatherPool;
 370   struct pci_pool *RequestSensePool = NULL;
 371   void *ScatterGatherCPU;
 372   dma_addr_t ScatterGatherDMA;
 373   void *RequestSenseCPU;
 374   dma_addr_t RequestSenseDMA;
 375   DAC960_Command_T *CommandGroup = NULL;
 376
 377
 378   if (Controller->FirmwareType == DAC960_V2_Controller)
 379         RequestSensePool = Controller->V2.RequestSensePool;
 380
 381   Controller->FreeCommands = NULL;
 382   for (i = 0; i < Controller->DriverQueueDepth; i++)
 383     {
 384       DAC960_Command_T *Command = Controller->Commands[i];
 385
 386       if (Command == NULL)
 387           continue;
 388
 389       if (Controller->FirmwareType == DAC960_V1_Controller) {
 390           ScatterGatherCPU = (void *)Command->V1.ScatterGatherList;
 391           ScatterGatherDMA = Command->V1.ScatterGatherListDMA;
 392           RequestSenseCPU = NULL;
 393           RequestSenseDMA = (dma_addr_t)0;
 394       } else {
 395           ScatterGatherCPU = (void *)Command->V2.ScatterGatherList;
 396           ScatterGatherDMA = Command->V2.ScatterGatherListDMA;
 397           RequestSenseCPU = (void *)Command->V2.RequestSense;
 398           RequestSenseDMA = Command->V2.RequestSenseDMA;
 399       }
 400       if (ScatterGatherCPU != NULL)
 401           pci_pool_free(ScatterGatherPool, ScatterGatherCPU, ScatterGatherDMA);
 402       if (RequestSenseCPU != NULL)
 403           pci_pool_free(RequestSensePool, RequestSenseCPU, RequestSenseDMA);
 404
 405       if ((Command->CommandIdentifier
 406            % Controller->CommandAllocationGroupSize) == 1) {
 407            /*
 408             * We can't free the group of commands until all of the
 409             * request sense and scatter gather dma structures are free.
 410             * Remember the beginning of the group, but don't free it
 411             * until we've reached the beginning of the next group.
 412             */
 413            kfree(CommandGroup);
 414            CommandGroup = Command;
 415       }
 416       Controller->Commands[i] = NULL;
 417     }
 418   kfree(CommandGroup);
 419
 420   if (Controller->CombinedStatusBuffer != NULL)
 421     {
 422       kfree(Controller->CombinedStatusBuffer);
 423       Controller->CombinedStatusBuffer = NULL;
 424       Controller->CurrentStatusBuffer = NULL;
 425     }
 426
 427   if (ScatterGatherPool != NULL)
 428         pci_pool_destroy(ScatterGatherPool);
 429   if (Controller->FirmwareType == DAC960_V1_Controller)
 430         return;
 431
 432   if (RequestSensePool != NULL)
 433         pci_pool_destroy(RequestSensePool);
 434
 435   for (i = 0; i < DAC960_MaxLogicalDrives; i++) {
 436         kfree(Controller->V2.LogicalDeviceInformation[i]);
 437         Controller->V2.LogicalDeviceInformation[i] = NULL;
 438   }
 439
 440   for (i = 0; i < DAC960_V2_MaxPhysicalDevices; i++)
 441     {
 442       kfree(Controller->V2.PhysicalDeviceInformation[i]);
 443       Controller->V2.PhysicalDeviceInformation[i] = NULL;
 444       kfree(Controller->V2.InquiryUnitSerialNumber[i]);
 445       Controller->V2.InquiryUnitSerialNumber[i] = NULL;
 446     }
 447 }
 448
 449
 450 /*
 451   DAC960_V1_ClearCommand clears critical fields of Command for DAC960 V1
 452   Firmware Controllers.
 453 */
 454
 455 static inline void DAC960_V1_ClearCommand(DAC960_Command_T *Command)
 456 {
 457   DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
 458   memset(CommandMailbox, 0, sizeof(DAC960_V1_CommandMailbox_T));
 459   Command->V1.CommandStatus = 0;
 460 }
 461
 462
 463 /*
 464   DAC960_V2_ClearCommand clears critical fields of Command for DAC960 V2
 465   Firmware Controllers.
 466 */
 467
 468 static inline void DAC960_V2_ClearCommand(DAC960_Command_T *Command)
 469 {
 470   DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
 471   memset(CommandMailbox, 0, sizeof(DAC960_V2_CommandMailbox_T));
 472   Command->V2.CommandStatus = 0;
 473 }
 474
 475
 476 /*
 477   DAC960_AllocateCommand allocates a Command structure from Controller's
 478   free list.  During driver initialization, a special initialization command
 479   has been placed on the free list to guarantee that command allocation can
 480   never fail.
 481 */
 482
 483 static inline DAC960_Command_T *DAC960_AllocateCommand(DAC960_Controller_T
 484                                                        *Controller)
 485 {
 486   DAC960_Command_T *Command = Controller->FreeCommands;
 487   if (Command == NULL) return NULL;
 488   Controller->FreeCommands = Command->Next;
 489   Command->Next = NULL;
 490   return Command;
 491 }
 492
 493
 494 /*
 495   DAC960_DeallocateCommand deallocates Command, returning it to Controller's
 496   free list.
 497 */
 498
 499 static inline void DAC960_DeallocateCommand(DAC960_Command_T *Command)
 500 {
 501   DAC960_Controller_T *Controller = Command->Controller;
 502
 503   Command->Request = NULL;
 504   Command->Next = Controller->FreeCommands;
 505   Controller->FreeCommands = Command;
 506 }
 507
 508
 509 /*
 510   DAC960_WaitForCommand waits for a wake_up on Controller's Command Wait Queue.
 511 */
 512
 513 static void DAC960_WaitForCommand(DAC960_Controller_T *Controller)
 514 {
 515   spin_unlock_irq(&Controller->queue_lock);
 516   __wait_event(Controller->CommandWaitQueue, Controller->FreeCommands);
 517   spin_lock_irq(&Controller->queue_lock);
 518 }
 519
 520 /*
 521   DAC960_GEM_QueueCommand queues Command for DAC960 GEM Series Controllers.
 522 */
 523
 524 static void DAC960_GEM_QueueCommand(DAC960_Command_T *Command)
 525 {
 526   DAC960_Controller_T *Controller = Command->Controller;
 527   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
 528   DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
 529   DAC960_V2_CommandMailbox_T *NextCommandMailbox =
 530       Controller->V2.NextCommandMailbox;
 531
 532   CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
 533   DAC960_GEM_WriteCommandMailbox(NextCommandMailbox, CommandMailbox);
 534
 535   if (Controller->V2.PreviousCommandMailbox1->Words[0] == 0 ||
 536       Controller->V2.PreviousCommandMailbox2->Words[0] == 0)
 537       DAC960_GEM_MemoryMailboxNewCommand(ControllerBaseAddress);
 538
 539   Controller->V2.PreviousCommandMailbox2 =
 540       Controller->V2.PreviousCommandMailbox1;
 541   Controller->V2.PreviousCommandMailbox1 = NextCommandMailbox;
 542
 543   if (++NextCommandMailbox > Controller->V2.LastCommandMailbox)
 544       NextCommandMailbox = Controller->V2.FirstCommandMailbox;
 545
 546   Controller->V2.NextCommandMailbox = NextCommandMailbox;
 547 }
 548
 549 /*
 550   DAC960_BA_QueueCommand queues Command for DAC960 BA Series Controllers.
 551 */
 552
 553 static void DAC960_BA_QueueCommand(DAC960_Command_T *Command)
 554 {
 555   DAC960_Controller_T *Controller = Command->Controller;
 556   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
 557   DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
 558   DAC960_V2_CommandMailbox_T *NextCommandMailbox =
 559     Controller->V2.NextCommandMailbox;
 560   CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
 561   DAC960_BA_WriteCommandMailbox(NextCommandMailbox, CommandMailbox);
 562   if (Controller->V2.PreviousCommandMailbox1->Words[0] == 0 ||
 563       Controller->V2.PreviousCommandMailbox2->Words[0] == 0)
 564     DAC960_BA_MemoryMailboxNewCommand(ControllerBaseAddress);
 565   Controller->V2.PreviousCommandMailbox2 =
 566     Controller->V2.PreviousCommandMailbox1;
 567   Controller->V2.PreviousCommandMailbox1 = NextCommandMailbox;
 568   if (++NextCommandMailbox > Controller->V2.LastCommandMailbox)
 569     NextCommandMailbox = Controller->V2.FirstCommandMailbox;
 570   Controller->V2.NextCommandMailbox = NextCommandMailbox;
 571 }
 572
 573
 574 /*
 575   DAC960_LP_QueueCommand queues Command for DAC960 LP Series Controllers.
 576 */
 577
 578 static void DAC960_LP_QueueCommand(DAC960_Command_T *Command)
 579 {
 580   DAC960_Controller_T *Controller = Command->Controller;
 581   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
 582   DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
 583   DAC960_V2_CommandMailbox_T *NextCommandMailbox =
 584     Controller->V2.NextCommandMailbox;
 585   CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
 586   DAC960_LP_WriteCommandMailbox(NextCommandMailbox, CommandMailbox);
 587   if (Controller->V2.PreviousCommandMailbox1->Words[0] == 0 ||
 588       Controller->V2.PreviousCommandMailbox2->Words[0] == 0)
 589     DAC960_LP_MemoryMailboxNewCommand(ControllerBaseAddress);
 590   Controller->V2.PreviousCommandMailbox2 =
 591     Controller->V2.PreviousCommandMailbox1;
 592   Controller->V2.PreviousCommandMailbox1 = NextCommandMailbox;
 593   if (++NextCommandMailbox > Controller->V2.LastCommandMailbox)
 594     NextCommandMailbox = Controller->V2.FirstCommandMailbox;
 595   Controller->V2.NextCommandMailbox = NextCommandMailbox;
 596 }
 597
 598
 599 /*
 600   DAC960_LA_QueueCommandDualMode queues Command for DAC960 LA Series
 601   Controllers with Dual Mode Firmware.
 602 */
 603
 604 static void DAC960_LA_QueueCommandDualMode(DAC960_Command_T *Command)
 605 {
 606   DAC960_Controller_T *Controller = Command->Controller;
 607   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
 608   DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
 609   DAC960_V1_CommandMailbox_T *NextCommandMailbox =
 610     Controller->V1.NextCommandMailbox;
 611   CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
 612   DAC960_LA_WriteCommandMailbox(NextCommandMailbox, CommandMailbox);
 613   if (Controller->V1.PreviousCommandMailbox1->Words[0] == 0 ||
 614       Controller->V1.PreviousCommandMailbox2->Words[0] == 0)
 615     DAC960_LA_MemoryMailboxNewCommand(ControllerBaseAddress);
 616   Controller->V1.PreviousCommandMailbox2 =
 617     Controller->V1.PreviousCommandMailbox1;
 618   Controller->V1.PreviousCommandMailbox1 = NextCommandMailbox;
 619   if (++NextCommandMailbox > Controller->V1.LastCommandMailbox)
 620     NextCommandMailbox = Controller->V1.FirstCommandMailbox;
 621   Controller->V1.NextCommandMailbox = NextCommandMailbox;
 622 }
 623
 624
 625 /*
 626   DAC960_LA_QueueCommandSingleMode queues Command for DAC960 LA Series
 627   Controllers with Single Mode Firmware.
 628 */
 629
 630 static void DAC960_LA_QueueCommandSingleMode(DAC960_Command_T *Command)
 631 {
 632   DAC960_Controller_T *Controller = Command->Controller;
 633   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
 634   DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
 635   DAC960_V1_CommandMailbox_T *NextCommandMailbox =
 636     Controller->V1.NextCommandMailbox;
 637   CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
 638   DAC960_LA_WriteCommandMailbox(NextCommandMailbox, CommandMailbox);
 639   if (Controller->V1.PreviousCommandMailbox1->Words[0] == 0 ||
 640       Controller->V1.PreviousCommandMailbox2->Words[0] == 0)
 641     DAC960_LA_HardwareMailboxNewCommand(ControllerBaseAddress);
 642   Controller->V1.PreviousCommandMailbox2 =
 643     Controller->V1.PreviousCommandMailbox1;
 644   Controller->V1.PreviousCommandMailbox1 = NextCommandMailbox;
 645   if (++NextCommandMailbox > Controller->V1.LastCommandMailbox)
 646     NextCommandMailbox = Controller->V1.FirstCommandMailbox;
 647   Controller->V1.NextCommandMailbox = NextCommandMailbox;
 648 }
 649
 650
 651 /*
 652   DAC960_PG_QueueCommandDualMode queues Command for DAC960 PG Series
 653   Controllers with Dual Mode Firmware.
 654 */
 655
 656 static void DAC960_PG_QueueCommandDualMode(DAC960_Command_T *Command)
 657 {
 658   DAC960_Controller_T *Controller = Command->Controller;
 659   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
 660   DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
 661   DAC960_V1_CommandMailbox_T *NextCommandMailbox =
 662     Controller->V1.NextCommandMailbox;
 663   CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
 664   DAC960_PG_WriteCommandMailbox(NextCommandMailbox, CommandMailbox);
 665   if (Controller->V1.PreviousCommandMailbox1->Words[0] == 0 ||
 666       Controller->V1.PreviousCommandMailbox2->Words[0] == 0)
 667     DAC960_PG_MemoryMailboxNewCommand(ControllerBaseAddress);
 668   Controller->V1.PreviousCommandMailbox2 =
 669     Controller->V1.PreviousCommandMailbox1;
 670   Controller->V1.PreviousCommandMailbox1 = NextCommandMailbox;
 671   if (++NextCommandMailbox > Controller->V1.LastCommandMailbox)
 672     NextCommandMailbox = Controller->V1.FirstCommandMailbox;
 673   Controller->V1.NextCommandMailbox = NextCommandMailbox;
 674 }
 675
 676
 677 /*
 678   DAC960_PG_QueueCommandSingleMode queues Command for DAC960 PG Series
 679   Controllers with Single Mode Firmware.
 680 */
 681
 682 static void DAC960_PG_QueueCommandSingleMode(DAC960_Command_T *Command)
 683 {
 684   DAC960_Controller_T *Controller = Command->Controller;
 685   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
 686   DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
 687   DAC960_V1_CommandMailbox_T *NextCommandMailbox =
 688     Controller->V1.NextCommandMailbox;
 689   CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
 690   DAC960_PG_WriteCommandMailbox(NextCommandMailbox, CommandMailbox);
 691   if (Controller->V1.PreviousCommandMailbox1->Words[0] == 0 ||
 692       Controller->V1.PreviousCommandMailbox2->Words[0] == 0)
 693     DAC960_PG_HardwareMailboxNewCommand(ControllerBaseAddress);
 694   Controller->V1.PreviousCommandMailbox2 =
 695     Controller->V1.PreviousCommandMailbox1;
 696   Controller->V1.PreviousCommandMailbox1 = NextCommandMailbox;
 697   if (++NextCommandMailbox > Controller->V1.LastCommandMailbox)
 698     NextCommandMailbox = Controller->V1.FirstCommandMailbox;
 699   Controller->V1.NextCommandMailbox = NextCommandMailbox;
 700 }
 701
 702
 703 /*
 704   DAC960_PD_QueueCommand queues Command for DAC960 PD Series Controllers.
 705 */
 706
 707 static void DAC960_PD_QueueCommand(DAC960_Command_T *Command)
 708 {
 709   DAC960_Controller_T *Controller = Command->Controller;
 710   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
 711   DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
 712   CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
 713   while (DAC960_PD_MailboxFullP(ControllerBaseAddress))
 714     udelay(1);
 715   DAC960_PD_WriteCommandMailbox(ControllerBaseAddress, CommandMailbox);
 716   DAC960_PD_NewCommand(ControllerBaseAddress);
 717 }
 718
 719
 720 /*
 721   DAC960_P_QueueCommand queues Command for DAC960 P Series Controllers.
 722 */
 723
 724 static void DAC960_P_QueueCommand(DAC960_Command_T *Command)
 725 {
 726   DAC960_Controller_T *Controller = Command->Controller;
 727   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
 728   DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
 729   CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
 730   switch (CommandMailbox->Common.CommandOpcode)
 731     {
 732     case DAC960_V1_Enquiry:
 733       CommandMailbox->Common.CommandOpcode = DAC960_V1_Enquiry_Old;
 734       break;
 735     case DAC960_V1_GetDeviceState:
 736       CommandMailbox->Common.CommandOpcode = DAC960_V1_GetDeviceState_Old;
 737       break;
 738     case DAC960_V1_Read:
 739       CommandMailbox->Common.CommandOpcode = DAC960_V1_Read_Old;
 740       DAC960_PD_To_P_TranslateReadWriteCommand(CommandMailbox);
 741       break;
 742     case DAC960_V1_Write:
 743       CommandMailbox->Common.CommandOpcode = DAC960_V1_Write_Old;
 744       DAC960_PD_To_P_TranslateReadWriteCommand(CommandMailbox);
 745       break;
 746     case DAC960_V1_ReadWithScatterGather:
 747       CommandMailbox->Common.CommandOpcode =
 748         DAC960_V1_ReadWithScatterGather_Old;
 749       DAC960_PD_To_P_TranslateReadWriteCommand(CommandMailbox);
 750       break;
 751     case DAC960_V1_WriteWithScatterGather:
 752       CommandMailbox->Common.CommandOpcode =
 753         DAC960_V1_WriteWithScatterGather_Old;
 754       DAC960_PD_To_P_TranslateReadWriteCommand(CommandMailbox);
 755       break;
 756     default:
 757       break;
 758     }
 759   while (DAC960_PD_MailboxFullP(ControllerBaseAddress))
 760     udelay(1);
 761   DAC960_PD_WriteCommandMailbox(ControllerBaseAddress, CommandMailbox);
 762   DAC960_PD_NewCommand(ControllerBaseAddress);
 763 }
 764
 765
 766 /*
 767   DAC960_ExecuteCommand executes Command and waits for completion.
 768 */
 769
 770 static void DAC960_ExecuteCommand(DAC960_Command_T *Command)
 771 {
 772   DAC960_Controller_T *Controller = Command->Controller;
 773   DECLARE_COMPLETION(Completion);
 774   unsigned long flags;
 775   Command->Completion = &Completion;
 776
 777   spin_lock_irqsave(&Controller->queue_lock, flags);
 778   DAC960_QueueCommand(Command);
 779   spin_unlock_irqrestore(&Controller->queue_lock, flags);
 780
 781   if (in_interrupt())
 782           return;
 783   wait_for_completion(&Completion);
 784 }
 785
 786
 787 /*
 788   DAC960_V1_ExecuteType3 executes a DAC960 V1 Firmware Controller Type 3
 789   Command and waits for completion.  It returns true on success and false
 790   on failure.
 791 */
 792
 793 static boolean DAC960_V1_ExecuteType3(DAC960_Controller_T *Controller,
 794                                       DAC960_V1_CommandOpcode_T CommandOpcode,
 795                                       dma_addr_t DataDMA)
 796 {
 797   DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
 798   DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
 799   DAC960_V1_CommandStatus_T CommandStatus;
 800   DAC960_V1_ClearCommand(Command);
 801   Command->CommandType = DAC960_ImmediateCommand;
 802   CommandMailbox->Type3.CommandOpcode = CommandOpcode;
 803   CommandMailbox->Type3.BusAddress = DataDMA;
 804   DAC960_ExecuteCommand(Command);
 805   CommandStatus = Command->V1.CommandStatus;
 806   DAC960_DeallocateCommand(Command);
 807   return (CommandStatus == DAC960_V1_NormalCompletion);
 808 }
 809
 810
 811 /*
 812   DAC960_V1_ExecuteTypeB executes a DAC960 V1 Firmware Controller Type 3B
 813   Command and waits for completion.  It returns true on success and false
 814   on failure.
 815 */
 816
 817 static boolean DAC960_V1_ExecuteType3B(DAC960_Controller_T *Controller,
 818                                        DAC960_V1_CommandOpcode_T CommandOpcode,
 819                                        unsigned char CommandOpcode2,
 820                                        dma_addr_t DataDMA)
 821 {
 822   DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
 823   DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
 824   DAC960_V1_CommandStatus_T CommandStatus;
 825   DAC960_V1_ClearCommand(Command);
 826   Command->CommandType = DAC960_ImmediateCommand;
 827   CommandMailbox->Type3B.CommandOpcode = CommandOpcode;
 828   CommandMailbox->Type3B.CommandOpcode2 = CommandOpcode2;
 829   CommandMailbox->Type3B.BusAddress = DataDMA;
 830   DAC960_ExecuteCommand(Command);
 831   CommandStatus = Command->V1.CommandStatus;
 832   DAC960_DeallocateCommand(Command);
 833   return (CommandStatus == DAC960_V1_NormalCompletion);
 834 }
 835
 836
 837 /*
 838   DAC960_V1_ExecuteType3D executes a DAC960 V1 Firmware Controller Type 3D
 839   Command and waits for completion.  It returns true on success and false
 840   on failure.
 841 */
 842
 843 static boolean DAC960_V1_ExecuteType3D(DAC960_Controller_T *Controller,
 844                                        DAC960_V1_CommandOpcode_T CommandOpcode,
 845                                        unsigned char Channel,
 846                                        unsigned char TargetID,
 847                                        dma_addr_t DataDMA)
 848 {
 849   DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
 850   DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
 851   DAC960_V1_CommandStatus_T CommandStatus;
 852   DAC960_V1_ClearCommand(Command);
 853   Command->CommandType = DAC960_ImmediateCommand;
 854   CommandMailbox->Type3D.CommandOpcode = CommandOpcode;
 855   CommandMailbox->Type3D.Channel = Channel;
 856   CommandMailbox->Type3D.TargetID = TargetID;
 857   CommandMailbox->Type3D.BusAddress = DataDMA;
 858   DAC960_ExecuteCommand(Command);
 859   CommandStatus = Command->V1.CommandStatus;
 860   DAC960_DeallocateCommand(Command);
 861   return (CommandStatus == DAC960_V1_NormalCompletion);
 862 }
 863
 864
 865 /*
 866   DAC960_V2_GeneralInfo executes a DAC960 V2 Firmware General Information
 867   Reading IOCTL Command and waits for completion.  It returns true on success
 868   and false on failure.
 869
 870   Return data in The controller's HealthStatusBuffer, which is dma-able memory
 871 */
 872
 873 static boolean DAC960_V2_GeneralInfo(DAC960_Controller_T *Controller)
 874 {
 875   DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
 876   DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
 877   DAC960_V2_CommandStatus_T CommandStatus;
 878   DAC960_V2_ClearCommand(Command);
 879   Command->CommandType = DAC960_ImmediateCommand;
 880   CommandMailbox->Common.CommandOpcode = DAC960_V2_IOCTL;
 881   CommandMailbox->Common.CommandControlBits
 882                         .DataTransferControllerToHost = true;
 883   CommandMailbox->Common.CommandControlBits
 884                         .NoAutoRequestSense = true;
 885   CommandMailbox->Common.DataTransferSize = sizeof(DAC960_V2_HealthStatusBuffer_T);
 886   CommandMailbox->Common.IOCTL_Opcode = DAC960_V2_GetHealthStatus;
 887   CommandMailbox->Common.DataTransferMemoryAddress
 888                         .ScatterGatherSegments[0]
 889                         .SegmentDataPointer =
 890     Controller->V2.HealthStatusBufferDMA;
 891   CommandMailbox->Common.DataTransferMemoryAddress
 892                         .ScatterGatherSegments[0]
 893                         .SegmentByteCount =
 894     CommandMailbox->Common.DataTransferSize;
 895   DAC960_ExecuteCommand(Command);
 896   CommandStatus = Command->V2.CommandStatus;
 897   DAC960_DeallocateCommand(Command);
 898   return (CommandStatus == DAC960_V2_NormalCompletion);
 899 }
 900
 901
 902 /*
 903   DAC960_V2_ControllerInfo executes a DAC960 V2 Firmware Controller
 904   Information Reading IOCTL Command and waits for completion.  It returns
 905   true on success and false on failure.
 906
 907   Data is returned in the controller's V2.NewControllerInformation dma-able
 908   memory buffer.
 909 */
 910
 911 static boolean DAC960_V2_NewControllerInfo(DAC960_Controller_T *Controller)
 912 {
 913   DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
 914   DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
 915   DAC960_V2_CommandStatus_T CommandStatus;
 916   DAC960_V2_ClearCommand(Command);
 917   Command->CommandType = DAC960_ImmediateCommand;
 918   CommandMailbox->ControllerInfo.CommandOpcode = DAC960_V2_IOCTL;
 919   CommandMailbox->ControllerInfo.CommandControlBits
 920                                 .DataTransferControllerToHost = true;
 921   CommandMailbox->ControllerInfo.CommandControlBits
 922                                 .NoAutoRequestSense = true;
 923   CommandMailbox->ControllerInfo.DataTransferSize = sizeof(DAC960_V2_ControllerInfo_T);
 924   CommandMailbox->ControllerInfo.ControllerNumber = 0;
 925   CommandMailbox->ControllerInfo.IOCTL_Opcode = DAC960_V2_GetControllerInfo;
 926   CommandMailbox->ControllerInfo.DataTransferMemoryAddress
 927                                 .ScatterGatherSegments[0]
 928                                 .SegmentDataPointer =
 929         Controller->V2.NewControllerInformationDMA;
 930   CommandMailbox->ControllerInfo.DataTransferMemoryAddress
 931                                 .ScatterGatherSegments[0]
 932                                 .SegmentByteCount =
 933     CommandMailbox->ControllerInfo.DataTransferSize;
 934   DAC960_ExecuteCommand(Command);
 935   CommandStatus = Command->V2.CommandStatus;
 936   DAC960_DeallocateCommand(Command);
 937   return (CommandStatus == DAC960_V2_NormalCompletion);
 938 }
 939
 940
 941 /*
 942   DAC960_V2_LogicalDeviceInfo executes a DAC960 V2 Firmware Controller Logical
 943   Device Information Reading IOCTL Command and waits for completion.  It
 944   returns true on success and false on failure.
 945
 946   Data is returned in the controller's V2.NewLogicalDeviceInformation
 947 */
 948
 949 static boolean DAC960_V2_NewLogicalDeviceInfo(DAC960_Controller_T *Controller,
 950                                            unsigned short LogicalDeviceNumber)
 951 {
 952   DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
 953   DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
 954   DAC960_V2_CommandStatus_T CommandStatus;
 955
 956   DAC960_V2_ClearCommand(Command);
 957   Command->CommandType = DAC960_ImmediateCommand;
 958   CommandMailbox->LogicalDeviceInfo.CommandOpcode =
 959                                 DAC960_V2_IOCTL;
 960   CommandMailbox->LogicalDeviceInfo.CommandControlBits
 961                                    .DataTransferControllerToHost = true;
 962   CommandMailbox->LogicalDeviceInfo.CommandControlBits
 963                                    .NoAutoRequestSense = true;
 964   CommandMailbox->LogicalDeviceInfo.DataTransferSize =
 965                                 sizeof(DAC960_V2_LogicalDeviceInfo_T);
 966   CommandMailbox->LogicalDeviceInfo.LogicalDevice.LogicalDeviceNumber =
 967     LogicalDeviceNumber;
 968   CommandMailbox->LogicalDeviceInfo.IOCTL_Opcode = DAC960_V2_GetLogicalDeviceInfoValid;
 969   CommandMailbox->LogicalDeviceInfo.DataTransferMemoryAddress
 970                                    .ScatterGatherSegments[0]
 971                                    .SegmentDataPointer =
 972         Controller->V2.NewLogicalDeviceInformationDMA;
 973   CommandMailbox->LogicalDeviceInfo.DataTransferMemoryAddress
 974                                    .ScatterGatherSegments[0]
 975                                    .SegmentByteCount =
 976     CommandMailbox->LogicalDeviceInfo.DataTransferSize;
 977   DAC960_ExecuteCommand(Command);
 978   CommandStatus = Command->V2.CommandStatus;
 979   DAC960_DeallocateCommand(Command);
 980   return (CommandStatus == DAC960_V2_NormalCompletion);
 981 }
 982
 983
 984 /*
 985   DAC960_V2_PhysicalDeviceInfo executes a DAC960 V2 Firmware Controller "Read
 986   Physical Device Information" IOCTL Command and waits for completion.  It
 987   returns true on success and false on failure.
 988
 989   The Channel, TargetID, LogicalUnit arguments should be 0 the first time
 990   this function is called for a given controller.  This will return data
 991   for the "first" device on that controller.  The returned data includes a
 992   Channel, TargetID, LogicalUnit that can be passed in to this routine to
 993   get data for the NEXT device on that controller.
 994
 995   Data is stored in the controller's V2.NewPhysicalDeviceInfo dma-able
 996   memory buffer.
 997
 998 */
 999
1000 static boolean DAC960_V2_NewPhysicalDeviceInfo(DAC960_Controller_T *Controller,
1001                                             unsigned char Channel,
1002                                             unsigned char TargetID,
1003                                             unsigned char LogicalUnit)
1004 {
1005   DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
1006   DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
1007   DAC960_V2_CommandStatus_T CommandStatus;
1008
1009   DAC960_V2_ClearCommand(Command);
1010   Command->CommandType = DAC960_ImmediateCommand;
1011   CommandMailbox->PhysicalDeviceInfo.CommandOpcode = DAC960_V2_IOCTL;
1012   CommandMailbox->PhysicalDeviceInfo.CommandControlBits
1013                                     .DataTransferControllerToHost = true;
1014   CommandMailbox->PhysicalDeviceInfo.CommandControlBits
1015                                     .NoAutoRequestSense = true;
1016   CommandMailbox->PhysicalDeviceInfo.DataTransferSize =
1017                                 sizeof(DAC960_V2_PhysicalDeviceInfo_T);
1018   CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.LogicalUnit = LogicalUnit;
1019   CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.TargetID = TargetID;
1020   CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.Channel = Channel;
1021   CommandMailbox->PhysicalDeviceInfo.IOCTL_Opcode =
1022                                         DAC960_V2_GetPhysicalDeviceInfoValid;
1023   CommandMailbox->PhysicalDeviceInfo.DataTransferMemoryAddress
1024                                     .ScatterGatherSegments[0]
1025                                     .SegmentDataPointer =
1026                                         Controller->V2.NewPhysicalDeviceInformationDMA;
1027   CommandMailbox->PhysicalDeviceInfo.DataTransferMemoryAddress
1028                                     .ScatterGatherSegments[0]
1029                                     .SegmentByteCount =
1030     CommandMailbox->PhysicalDeviceInfo.DataTransferSize;
1031   DAC960_ExecuteCommand(Command);
1032   CommandStatus = Command->V2.CommandStatus;
1033   DAC960_DeallocateCommand(Command);
1034   return (CommandStatus == DAC960_V2_NormalCompletion);
1035 }
1036
1037
1038 static void DAC960_V2_ConstructNewUnitSerialNumber(
1039         DAC960_Controller_T *Controller,
1040         DAC960_V2_CommandMailbox_T *CommandMailbox, int Channel, int TargetID,
1041         int LogicalUnit)
1042 {
1043       CommandMailbox->SCSI_10.CommandOpcode = DAC960_V2_SCSI_10_Passthru;
1044       CommandMailbox->SCSI_10.CommandControlBits
1045                              .DataTransferControllerToHost = true;
1046       CommandMailbox->SCSI_10.CommandControlBits
1047                              .NoAutoRequestSense = true;
1048       CommandMailbox->SCSI_10.DataTransferSize =
1049         sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T);
1050       CommandMailbox->SCSI_10.PhysicalDevice.LogicalUnit = LogicalUnit;
1051       CommandMailbox->SCSI_10.PhysicalDevice.TargetID = TargetID;
1052       CommandMailbox->SCSI_10.PhysicalDevice.Channel = Channel;
1053       CommandMailbox->SCSI_10.CDBLength = 6;
1054       CommandMailbox->SCSI_10.SCSI_CDB[0] = 0x12; /* INQUIRY */
1055       CommandMailbox->SCSI_10.SCSI_CDB[1] = 1; /* EVPD = 1 */
1056       CommandMailbox->SCSI_10.SCSI_CDB[2] = 0x80; /* Page Code */
1057       CommandMailbox->SCSI_10.SCSI_CDB[3] = 0; /* Reserved */
1058       CommandMailbox->SCSI_10.SCSI_CDB[4] =
1059         sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T);
1060       CommandMailbox->SCSI_10.SCSI_CDB[5] = 0; /* Control */
1061       CommandMailbox->SCSI_10.DataTransferMemoryAddress
1062                              .ScatterGatherSegments[0]
1063                              .SegmentDataPointer =
1064                 Controller->V2.NewInquiryUnitSerialNumberDMA;
1065       CommandMailbox->SCSI_10.DataTransferMemoryAddress
1066                              .ScatterGatherSegments[0]
1067                              .SegmentByteCount =
1068                 CommandMailbox->SCSI_10.DataTransferSize;
1069 }
1070
1071
1072 /*
1073   DAC960_V2_NewUnitSerialNumber executes an SCSI pass-through
1074   Inquiry command to a SCSI device identified by Channel number,
1075   Target id, Logical Unit Number.  This function Waits for completion
1076   of the command.
1077
1078   The return data includes Unit Serial Number information for the
1079   specified device.
1080
1081   Data is stored in the controller's V2.NewPhysicalDeviceInfo dma-able
1082   memory buffer.
1083 */
1084
1085 static boolean DAC960_V2_NewInquiryUnitSerialNumber(DAC960_Controller_T *Controller,
1086                         int Channel, int TargetID, int LogicalUnit)
1087 {
1088       DAC960_Command_T *Command;
1089       DAC960_V2_CommandMailbox_T *CommandMailbox;
1090       DAC960_V2_CommandStatus_T CommandStatus;
1091
1092       Command = DAC960_AllocateCommand(Controller);
1093       CommandMailbox = &Command->V2.CommandMailbox;
1094       DAC960_V2_ClearCommand(Command);
1095       Command->CommandType = DAC960_ImmediateCommand;
1096
1097       DAC960_V2_ConstructNewUnitSerialNumber(Controller, CommandMailbox,
1098                         Channel, TargetID, LogicalUnit);
1099
1100       DAC960_ExecuteCommand(Command);
1101       CommandStatus = Command->V2.CommandStatus;
1102       DAC960_DeallocateCommand(Command);
1103       return (CommandStatus == DAC960_V2_NormalCompletion);
1104 }
1105
1106
1107 /*
1108   DAC960_V2_DeviceOperation executes a DAC960 V2 Firmware Controller Device
1109   Operation IOCTL Command and waits for completion.  It returns true on
1110   success and false on failure.
1111 */
1112
1113 static boolean DAC960_V2_DeviceOperation(DAC960_Controller_T *Controller,
1114                                          DAC960_V2_IOCTL_Opcode_T IOCTL_Opcode,
1115                                          DAC960_V2_OperationDevice_T
1116                                            OperationDevice)
1117 {
1118   DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
1119   DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
1120   DAC960_V2_CommandStatus_T CommandStatus;
1121   DAC960_V2_ClearCommand(Command);
1122   Command->CommandType = DAC960_ImmediateCommand;
1123   CommandMailbox->DeviceOperation.CommandOpcode = DAC960_V2_IOCTL;
1124   CommandMailbox->DeviceOperation.CommandControlBits
1125                                  .DataTransferControllerToHost = true;
1126   CommandMailbox->DeviceOperation.CommandControlBits
1127                                  .NoAutoRequestSense = true;
1128   CommandMailbox->DeviceOperation.IOCTL_Opcode = IOCTL_Opcode;
1129   CommandMailbox->DeviceOperation.OperationDevice = OperationDevice;
1130   DAC960_ExecuteCommand(Command);
1131   CommandStatus = Command->V2.CommandStatus;
1132   DAC960_DeallocateCommand(Command);
1133   return (CommandStatus == DAC960_V2_NormalCompletion);
1134 }
1135
1136
1137 /*
1138   DAC960_V1_EnableMemoryMailboxInterface enables the Memory Mailbox Interface
1139   for DAC960 V1 Firmware Controllers.
1140
1141   PD and P controller types have no memory mailbox, but still need the
1142   other dma mapped memory.
1143 */
1144
1145 static boolean DAC960_V1_EnableMemoryMailboxInterface(DAC960_Controller_T
1146                                                       *Controller)
1147 {
1148   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
1149   DAC960_HardwareType_T hw_type = Controller->HardwareType;
1150   struct pci_dev *PCI_Device = Controller->PCIDevice;
1151   struct dma_loaf *DmaPages = &Controller->DmaPages;
1152   size_t DmaPagesSize;
1153   size_t CommandMailboxesSize;
1154   size_t StatusMailboxesSize;
1155
1156   DAC960_V1_CommandMailbox_T *CommandMailboxesMemory;
1157   dma_addr_t CommandMailboxesMemoryDMA;
1158
1159   DAC960_V1_StatusMailbox_T *StatusMailboxesMemory;
1160   dma_addr_t StatusMailboxesMemoryDMA;
1161
1162   DAC960_V1_CommandMailbox_T CommandMailbox;
1163   DAC960_V1_CommandStatus_T CommandStatus;
1164   int TimeoutCounter;
1165   int i;
1166
1167
1168   if (pci_set_dma_mask(Controller->PCIDevice, DAC690_V1_PciDmaMask))
1169         return DAC960_Failure(Controller, "DMA mask out of range");
1170   Controller->BounceBufferLimit = DAC690_V1_PciDmaMask;
1171
1172   if ((hw_type == DAC960_PD_Controller) || (hw_type == DAC960_P_Controller)) {
1173     CommandMailboxesSize =  0;
1174     StatusMailboxesSize = 0;
1175   } else {
1176     CommandMailboxesSize =  DAC960_V1_CommandMailboxCount * sizeof(DAC960_V1_CommandMailbox_T);
1177     StatusMailboxesSize = DAC960_V1_StatusMailboxCount * sizeof(DAC960_V1_StatusMailbox_T);
1178   }
1179   DmaPagesSize = CommandMailboxesSize + StatusMailboxesSize +
1180         sizeof(DAC960_V1_DCDB_T) + sizeof(DAC960_V1_Enquiry_T) +
1181         sizeof(DAC960_V1_ErrorTable_T) + sizeof(DAC960_V1_EventLogEntry_T) +
1182         sizeof(DAC960_V1_RebuildProgress_T) +
1183         sizeof(DAC960_V1_LogicalDriveInformationArray_T) +
1184         sizeof(DAC960_V1_BackgroundInitializationStatus_T) +
1185         sizeof(DAC960_V1_DeviceState_T) + sizeof(DAC960_SCSI_Inquiry_T) +
1186         sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T);
1187
1188   if (!init_dma_loaf(PCI_Device, DmaPages, DmaPagesSize))
1189         return false;
1190
1191
1192   if ((hw_type == DAC960_PD_Controller) || (hw_type == DAC960_P_Controller))
1193         goto skip_mailboxes;
1194
1195   CommandMailboxesMemory = slice_dma_loaf(DmaPages,
1196                 CommandMailboxesSize, &CommandMailboxesMemoryDMA);
1197
1198   /* These are the base addresses for the command memory mailbox array */
1199   Controller->V1.FirstCommandMailbox = CommandMailboxesMemory;
1200   Controller->V1.FirstCommandMailboxDMA = CommandMailboxesMemoryDMA;
1201
1202   CommandMailboxesMemory += DAC960_V1_CommandMailboxCount - 1;
1203   Controller->V1.LastCommandMailbox = CommandMailboxesMemory;
1204   Controller->V1.NextCommandMailbox = Controller->V1.FirstCommandMailbox;
1205   Controller->V1.PreviousCommandMailbox1 = Controller->V1.LastCommandMailbox;
1206   Controller->V1.PreviousCommandMailbox2 =
1207                                         Controller->V1.LastCommandMailbox - 1;
1208
1209   /* These are the base addresses for the status memory mailbox array */
1210   StatusMailboxesMemory = slice_dma_loaf(DmaPages,
1211                 StatusMailboxesSize, &StatusMailboxesMemoryDMA);
1212
1213   Controller->V1.FirstStatusMailbox = StatusMailboxesMemory;
1214   Controller->V1.FirstStatusMailboxDMA = StatusMailboxesMemoryDMA;
1215   StatusMailboxesMemory += DAC960_V1_StatusMailboxCount - 1;
1216   Controller->V1.LastStatusMailbox = StatusMailboxesMemory;
1217   Controller->V1.NextStatusMailbox = Controller->V1.FirstStatusMailbox;
1218
1219 skip_mailboxes:
1220   Controller->V1.MonitoringDCDB = slice_dma_loaf(DmaPages,
1221                 sizeof(DAC960_V1_DCDB_T),
1222                 &Controller->V1.MonitoringDCDB_DMA);
1223
1224   Controller->V1.NewEnquiry = slice_dma_loaf(DmaPages,
1225                 sizeof(DAC960_V1_Enquiry_T),
1226                 &Controller->V1.NewEnquiryDMA);
1227
1228   Controller->V1.NewErrorTable = slice_dma_loaf(DmaPages,
1229                 sizeof(DAC960_V1_ErrorTable_T),
1230                 &Controller->V1.NewErrorTableDMA);
1231
1232   Controller->V1.EventLogEntry = slice_dma_loaf(DmaPages,
1233                 sizeof(DAC960_V1_EventLogEntry_T),
1234                 &Controller->V1.EventLogEntryDMA);
1235
1236   Controller->V1.RebuildProgress = slice_dma_loaf(DmaPages,
1237                 sizeof(DAC960_V1_RebuildProgress_T),
1238                 &Controller->V1.RebuildProgressDMA);
1239
1240   Controller->V1.NewLogicalDriveInformation = slice_dma_loaf(DmaPages,
1241                 sizeof(DAC960_V1_LogicalDriveInformationArray_T),
1242                 &Controller->V1.NewLogicalDriveInformationDMA);
1243
1244   Controller->V1.BackgroundInitializationStatus = slice_dma_loaf(DmaPages,
1245                 sizeof(DAC960_V1_BackgroundInitializationStatus_T),
1246                 &Controller->V1.BackgroundInitializationStatusDMA);
1247
1248   Controller->V1.NewDeviceState = slice_dma_loaf(DmaPages,
1249                 sizeof(DAC960_V1_DeviceState_T),
1250                 &Controller->V1.NewDeviceStateDMA);
1251
1252   Controller->V1.NewInquiryStandardData = slice_dma_loaf(DmaPages,
1253                 sizeof(DAC960_SCSI_Inquiry_T),
1254                 &Controller->V1.NewInquiryStandardDataDMA);
1255
1256   Controller->V1.NewInquiryUnitSerialNumber = slice_dma_loaf(DmaPages,
1257                 sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T),
1258                 &Controller->V1.NewInquiryUnitSerialNumberDMA);
1259
1260   if ((hw_type == DAC960_PD_Controller) || (hw_type == DAC960_P_Controller))
1261         return true;
1262
1263   /* Enable the Memory Mailbox Interface. */
1264   Controller->V1.DualModeMemoryMailboxInterface = true;
1265   CommandMailbox.TypeX.CommandOpcode = 0x2B;
1266   CommandMailbox.TypeX.CommandIdentifier = 0;
1267   CommandMailbox.TypeX.CommandOpcode2 = 0x14;
1268   CommandMailbox.TypeX.CommandMailboxesBusAddress =
1269                                 Controller->V1.FirstCommandMailboxDMA;
1270   CommandMailbox.TypeX.StatusMailboxesBusAddress =
1271                                 Controller->V1.FirstStatusMailboxDMA;
1272 #define TIMEOUT_COUNT 1000000
1273
1274   for (i = 0; i < 2; i++)
1275     switch (Controller->HardwareType)
1276       {
1277       case DAC960_LA_Controller:
1278         TimeoutCounter = TIMEOUT_COUNT;
1279         while (--TimeoutCounter >= 0)
1280           {
1281             if (!DAC960_LA_HardwareMailboxFullP(ControllerBaseAddress))
1282               break;
1283             udelay(10);
1284           }
1285         if (TimeoutCounter < 0) return false;
1286         DAC960_LA_WriteHardwareMailbox(ControllerBaseAddress, &CommandMailbox);
1287         DAC960_LA_HardwareMailboxNewCommand(ControllerBaseAddress);
1288         TimeoutCounter = TIMEOUT_COUNT;
1289         while (--TimeoutCounter >= 0)
1290           {
1291             if (DAC960_LA_HardwareMailboxStatusAvailableP(
1292                   ControllerBaseAddress))
1293               break;
1294             udelay(10);
1295           }
1296         if (TimeoutCounter < 0) return false;
1297         CommandStatus = DAC960_LA_ReadStatusRegister(ControllerBaseAddress);
1298         DAC960_LA_AcknowledgeHardwareMailboxInterrupt(ControllerBaseAddress);
1299         DAC960_LA_AcknowledgeHardwareMailboxStatus(ControllerBaseAddress);
1300         if (CommandStatus == DAC960_V1_NormalCompletion) return true;
1301         Controller->V1.DualModeMemoryMailboxInterface = false;
1302         CommandMailbox.TypeX.CommandOpcode2 = 0x10;
1303         break;
1304       case DAC960_PG_Controller:
1305         TimeoutCounter = TIMEOUT_COUNT;
1306         while (--TimeoutCounter >= 0)
1307           {
1308             if (!DAC960_PG_HardwareMailboxFullP(ControllerBaseAddress))
1309               break;
1310             udelay(10);
1311           }
1312         if (TimeoutCounter < 0) return false;
1313         DAC960_PG_WriteHardwareMailbox(ControllerBaseAddress, &CommandMailbox);
1314         DAC960_PG_HardwareMailboxNewCommand(ControllerBaseAddress);
1315
1316         TimeoutCounter = TIMEOUT_COUNT;
1317         while (--TimeoutCounter >= 0)
1318           {
1319             if (DAC960_PG_HardwareMailboxStatusAvailableP(
1320                   ControllerBaseAddress))
1321               break;
1322             udelay(10);
1323           }
1324         if (TimeoutCounter < 0) return false;
1325         CommandStatus = DAC960_PG_ReadStatusRegister(ControllerBaseAddress);
1326         DAC960_PG_AcknowledgeHardwareMailboxInterrupt(ControllerBaseAddress);
1327         DAC960_PG_AcknowledgeHardwareMailboxStatus(ControllerBaseAddress);
1328         if (CommandStatus == DAC960_V1_NormalCompletion) return true;
1329         Controller->V1.DualModeMemoryMailboxInterface = false;
1330         CommandMailbox.TypeX.CommandOpcode2 = 0x10;
1331         break;
1332       default:
1333         DAC960_Failure(Controller, "Unknown Controller Type\n");
1334         break;
1335       }
1336   return false;
1337 }
1338
1339
1340 /*
1341   DAC960_V2_EnableMemoryMailboxInterface enables the Memory Mailbox Interface
1342   for DAC960 V2 Firmware Controllers.
1343
1344   Aggregate the space needed for the controller's memory mailbox and
1345   the other data structures that will be targets of dma transfers with
1346   the controller.  Allocate a dma-mapped region of memory to hold these
1347   structures.  Then, save CPU pointers and dma_addr_t values to reference
1348   the structures that are contained in that region.
1349 */
1350
1351 static boolean DAC960_V2_EnableMemoryMailboxInterface(DAC960_Controller_T
1352                                                       *Controller)
1353 {
1354   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
1355   struct pci_dev *PCI_Device = Controller->PCIDevice;
1356   struct dma_loaf *DmaPages = &Controller->DmaPages;
1357   size_t DmaPagesSize;
1358   size_t CommandMailboxesSize;
1359   size_t StatusMailboxesSize;
1360
1361   DAC960_V2_CommandMailbox_T *CommandMailboxesMemory;
1362   dma_addr_t CommandMailboxesMemoryDMA;
1363
1364   DAC960_V2_StatusMailbox_T *StatusMailboxesMemory;
1365   dma_addr_t StatusMailboxesMemoryDMA;
1366
1367   DAC960_V2_CommandMailbox_T *CommandMailbox;
1368   dma_addr_t    CommandMailboxDMA;
1369   DAC960_V2_CommandStatus_T CommandStatus;
1370
1371   if (pci_set_dma_mask(Controller->PCIDevice, DAC690_V2_PciDmaMask))
1372         return DAC960_Failure(Controller, "DMA mask out of range");
1373   Controller->BounceBufferLimit = DAC690_V2_PciDmaMask;
1374
1375   /* This is a temporary dma mapping, used only in the scope of this function */
1376   CommandMailbox =
1377           (DAC960_V2_CommandMailbox_T *)pci_alloc_consistent( PCI_Device,
1378                 sizeof(DAC960_V2_CommandMailbox_T), &CommandMailboxDMA);
1379   if (CommandMailbox == NULL)
1380           return false;
1381
1382   CommandMailboxesSize = DAC960_V2_CommandMailboxCount * sizeof(DAC960_V2_CommandMailbox_T);
1383   StatusMailboxesSize = DAC960_V2_StatusMailboxCount * sizeof(DAC960_V2_StatusMailbox_T);
1384   DmaPagesSize =
1385     CommandMailboxesSize + StatusMailboxesSize +
1386     sizeof(DAC960_V2_HealthStatusBuffer_T) +
1387     sizeof(DAC960_V2_ControllerInfo_T) +
1388     sizeof(DAC960_V2_LogicalDeviceInfo_T) +
1389     sizeof(DAC960_V2_PhysicalDeviceInfo_T) +
1390     sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T) +
1391     sizeof(DAC960_V2_Event_T) +
1392     sizeof(DAC960_V2_PhysicalToLogicalDevice_T);
1393
1394   if (!init_dma_loaf(PCI_Device, DmaPages, DmaPagesSize)) {
1395         pci_free_consistent(PCI_Device, sizeof(DAC960_V2_CommandMailbox_T),
1396                                         CommandMailbox, CommandMailboxDMA);
1397         return false;
1398   }
1399
1400   CommandMailboxesMemory = slice_dma_loaf(DmaPages,
1401                 CommandMailboxesSize, &CommandMailboxesMemoryDMA);
1402
1403   /* These are the base addresses for the command memory mailbox array */
1404   Controller->V2.FirstCommandMailbox = CommandMailboxesMemory;
1405   Controller->V2.FirstCommandMailboxDMA = CommandMailboxesMemoryDMA;
1406
1407   CommandMailboxesMemory += DAC960_V2_CommandMailboxCount - 1;
1408   Controller->V2.LastCommandMailbox = CommandMailboxesMemory;
1409   Controller->V2.NextCommandMailbox = Controller->V2.FirstCommandMailbox;
1410   Controller->V2.PreviousCommandMailbox1 = Controller->V2.LastCommandMailbox;
1411   Controller->V2.PreviousCommandMailbox2 =
1412                                         Controller->V2.LastCommandMailbox - 1;
1413
1414   /* These are the base addresses for the status memory mailbox array */
1415   StatusMailboxesMemory = slice_dma_loaf(DmaPages,
1416                 StatusMailboxesSize, &StatusMailboxesMemoryDMA);
1417
1418   Controller->V2.FirstStatusMailbox = StatusMailboxesMemory;
1419   Controller->V2.FirstStatusMailboxDMA = StatusMailboxesMemoryDMA;
1420   StatusMailboxesMemory += DAC960_V2_StatusMailboxCount - 1;
1421   Controller->V2.LastStatusMailbox = StatusMailboxesMemory;
1422   Controller->V2.NextStatusMailbox = Controller->V2.FirstStatusMailbox;
1423
1424   Controller->V2.HealthStatusBuffer = slice_dma_loaf(DmaPages,
1425                 sizeof(DAC960_V2_HealthStatusBuffer_T),
1426                 &Controller->V2.HealthStatusBufferDMA);
1427
1428   Controller->V2.NewControllerInformation = slice_dma_loaf(DmaPages,
1429                 sizeof(DAC960_V2_ControllerInfo_T),
1430                 &Controller->V2.NewControllerInformationDMA);
1431
1432   Controller->V2.NewLogicalDeviceInformation =  slice_dma_loaf(DmaPages,
1433                 sizeof(DAC960_V2_LogicalDeviceInfo_T),
1434                 &Controller->V2.NewLogicalDeviceInformationDMA);
1435
1436   Controller->V2.NewPhysicalDeviceInformation = slice_dma_loaf(DmaPages,
1437                 sizeof(DAC960_V2_PhysicalDeviceInfo_T),
1438                 &Controller->V2.NewPhysicalDeviceInformationDMA);
1439
1440   Controller->V2.NewInquiryUnitSerialNumber = slice_dma_loaf(DmaPages,
1441                 sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T),
1442                 &Controller->V2.NewInquiryUnitSerialNumberDMA);
1443
1444   Controller->V2.Event = slice_dma_loaf(DmaPages,
1445                 sizeof(DAC960_V2_Event_T),
1446                 &Controller->V2.EventDMA);
1447
1448   Controller->V2.PhysicalToLogicalDevice = slice_dma_loaf(DmaPages,
1449                 sizeof(DAC960_V2_PhysicalToLogicalDevice_T),
1450                 &Controller->V2.PhysicalToLogicalDeviceDMA);
1451
1452   /*
1453     Enable the Memory Mailbox Interface.
1454
1455     I don't know why we can't just use one of the memory mailboxes
1456     we just allocated to do this, instead of using this temporary one.
1457     Try this change later.
1458   */
1459   memset(CommandMailbox, 0, sizeof(DAC960_V2_CommandMailbox_T));
1460   CommandMailbox->SetMemoryMailbox.CommandIdentifier = 1;
1461   CommandMailbox->SetMemoryMailbox.CommandOpcode = DAC960_V2_IOCTL;
1462   CommandMailbox->SetMemoryMailbox.CommandControlBits.NoAutoRequestSense = true;
1463   CommandMailbox->SetMemoryMailbox.FirstCommandMailboxSizeKB =
1464     (DAC960_V2_CommandMailboxCount * sizeof(DAC960_V2_CommandMailbox_T)) >> 10;
1465   CommandMailbox->SetMemoryMailbox.FirstStatusMailboxSizeKB =
1466     (DAC960_V2_StatusMailboxCount * sizeof(DAC960_V2_StatusMailbox_T)) >> 10;
1467   CommandMailbox->SetMemoryMailbox.SecondCommandMailboxSizeKB = 0;
1468   CommandMailbox->SetMemoryMailbox.SecondStatusMailboxSizeKB = 0;
1469   CommandMailbox->SetMemoryMailbox.RequestSenseSize = 0;
1470   CommandMailbox->SetMemoryMailbox.IOCTL_Opcode = DAC960_V2_SetMemoryMailbox;
1471   CommandMailbox->SetMemoryMailbox.HealthStatusBufferSizeKB = 1;
1472   CommandMailbox->SetMemoryMailbox.HealthStatusBufferBusAddress =
1473                                         Controller->V2.HealthStatusBufferDMA;
1474   CommandMailbox->SetMemoryMailbox.FirstCommandMailboxBusAddress =
1475                                         Controller->V2.FirstCommandMailboxDMA;
1476   CommandMailbox->SetMemoryMailbox.FirstStatusMailboxBusAddress =
1477                                         Controller->V2.FirstStatusMailboxDMA;
1478   switch (Controller->HardwareType)
1479     {
1480     case DAC960_GEM_Controller:
1481       while (DAC960_GEM_HardwareMailboxFullP(ControllerBaseAddress))
1482         udelay(1);
1483       DAC960_GEM_WriteHardwareMailbox(ControllerBaseAddress, CommandMailboxDMA);
1484       DAC960_GEM_HardwareMailboxNewCommand(ControllerBaseAddress);
1485       while (!DAC960_GEM_HardwareMailboxStatusAvailableP(ControllerBaseAddress))
1486         udelay(1);
1487       CommandStatus = DAC960_GEM_ReadCommandStatus(ControllerBaseAddress);
1488       DAC960_GEM_AcknowledgeHardwareMailboxInterrupt(ControllerBaseAddress);
1489       DAC960_GEM_AcknowledgeHardwareMailboxStatus(ControllerBaseAddress);
1490       break;
1491     case DAC960_BA_Controller:
1492       while (DAC960_BA_HardwareMailboxFullP(ControllerBaseAddress))
1493         udelay(1);
1494       DAC960_BA_WriteHardwareMailbox(ControllerBaseAddress, CommandMailboxDMA);
1495       DAC960_BA_HardwareMailboxNewCommand(ControllerBaseAddress);
1496       while (!DAC960_BA_HardwareMailboxStatusAvailableP(ControllerBaseAddress))
1497         udelay(1);
1498       CommandStatus = DAC960_BA_ReadCommandStatus(ControllerBaseAddress);
1499       DAC960_BA_AcknowledgeHardwareMailboxInterrupt(ControllerBaseAddress);
1500       DAC960_BA_AcknowledgeHardwareMailboxStatus(ControllerBaseAddress);
1501       break;
1502     case DAC960_LP_Controller:
1503       while (DAC960_LP_HardwareMailboxFullP(ControllerBaseAddress))
1504         udelay(1);
1505       DAC960_LP_WriteHardwareMailbox(ControllerBaseAddress, CommandMailboxDMA);
1506       DAC960_LP_HardwareMailboxNewCommand(ControllerBaseAddress);
1507       while (!DAC960_LP_HardwareMailboxStatusAvailableP(ControllerBaseAddress))
1508         udelay(1);
1509       CommandStatus = DAC960_LP_ReadCommandStatus(ControllerBaseAddress);
1510       DAC960_LP_AcknowledgeHardwareMailboxInterrupt(ControllerBaseAddress);
1511       DAC960_LP_AcknowledgeHardwareMailboxStatus(ControllerBaseAddress);
1512       break;
1513     default:
1514       DAC960_Failure(Controller, "Unknown Controller Type\n");
1515       CommandStatus = DAC960_V2_AbormalCompletion;
1516       break;
1517     }
1518   pci_free_consistent(PCI_Device, sizeof(DAC960_V2_CommandMailbox_T),
1519                                         CommandMailbox, CommandMailboxDMA);
1520   return (CommandStatus == DAC960_V2_NormalCompletion);
1521 }
1522
1523
1524 /*
1525   DAC960_V1_ReadControllerConfiguration reads the Configuration Information
1526   from DAC960 V1 Firmware Controllers and initializes the Controller structure.
1527 */
1528
1529 static boolean DAC960_V1_ReadControllerConfiguration(DAC960_Controller_T
1530                                                      *Controller)
1531 {
1532   DAC960_V1_Enquiry2_T *Enquiry2;
1533   dma_addr_t Enquiry2DMA;
1534   DAC960_V1_Config2_T *Config2;
1535   dma_addr_t Config2DMA;
1536   int LogicalDriveNumber, Channel, TargetID;
1537   struct dma_loaf local_dma;
1538
1539   if (!init_dma_loaf(Controller->PCIDevice, &local_dma,
1540                 sizeof(DAC960_V1_Enquiry2_T) + sizeof(DAC960_V1_Config2_T)))
1541         return DAC960_Failure(Controller, "LOGICAL DEVICE ALLOCATION");
1542
1543   Enquiry2 = slice_dma_loaf(&local_dma, sizeof(DAC960_V1_Enquiry2_T), &Enquiry2DMA);
1544   Config2 = slice_dma_loaf(&local_dma, sizeof(DAC960_V1_Config2_T), &Config2DMA);
1545
1546   if (!DAC960_V1_ExecuteType3(Controller, DAC960_V1_Enquiry,
1547                               Controller->V1.NewEnquiryDMA)) {
1548     free_dma_loaf(Controller->PCIDevice, &local_dma);
1549     return DAC960_Failure(Controller, "ENQUIRY");
1550   }
1551   memcpy(&Controller->V1.Enquiry, Controller->V1.NewEnquiry,
1552                                                 sizeof(DAC960_V1_Enquiry_T));
1553
1554   if (!DAC960_V1_ExecuteType3(Controller, DAC960_V1_Enquiry2, Enquiry2DMA)) {
1555     free_dma_loaf(Controller->PCIDevice, &local_dma);
1556     return DAC960_Failure(Controller, "ENQUIRY2");
1557   }
1558
1559   if (!DAC960_V1_ExecuteType3(Controller, DAC960_V1_ReadConfig2, Config2DMA)) {
1560     free_dma_loaf(Controller->PCIDevice, &local_dma);
1561     return DAC960_Failure(Controller, "READ CONFIG2");
1562   }
1563
1564   if (!DAC960_V1_ExecuteType3(Controller, DAC960_V1_GetLogicalDriveInformation,
1565                               Controller->V1.NewLogicalDriveInformationDMA)) {
1566     free_dma_loaf(Controller->PCIDevice, &local_dma);
1567     return DAC960_Failure(Controller, "GET LOGICAL DRIVE INFORMATION");
1568   }
1569   memcpy(&Controller->V1.LogicalDriveInformation,
1570                 Controller->V1.NewLogicalDriveInformation,
1571                 sizeof(DAC960_V1_LogicalDriveInformationArray_T));
1572
1573   for (Channel = 0; Channel < Enquiry2->ActualChannels; Channel++)
1574     for (TargetID = 0; TargetID < Enquiry2->MaxTargets; TargetID++) {
1575       if (!DAC960_V1_ExecuteType3D(Controller, DAC960_V1_GetDeviceState,
1576                                    Channel, TargetID,
1577                                    Controller->V1.NewDeviceStateDMA)) {
1578                 free_dma_loaf(Controller->PCIDevice, &local_dma);
1579                 return DAC960_Failure(Controller, "GET DEVICE STATE");
1580         }
1581         memcpy(&Controller->V1.DeviceState[Channel][TargetID],
1582                 Controller->V1.NewDeviceState, sizeof(DAC960_V1_DeviceState_T));
1583      }
1584   /*
1585     Initialize the Controller Model Name and Full Model Name fields.
1586   */
1587   switch (Enquiry2->HardwareID.SubModel)
1588     {
1589     case DAC960_V1_P_PD_PU:
1590       if (Enquiry2->SCSICapability.BusSpeed == DAC960_V1_Ultra)
1591         strcpy(Controller->ModelName, "DAC960PU");
1592       else strcpy(Controller->ModelName, "DAC960PD");
1593       break;
1594     case DAC960_V1_PL:
1595       strcpy(Controller->ModelName, "DAC960PL");
1596       break;
1597     case DAC960_V1_PG:
1598       strcpy(Controller->ModelName, "DAC960PG");
1599       break;
1600     case DAC960_V1_PJ:
1601       strcpy(Controller->ModelName, "DAC960PJ");
1602       break;
1603     case DAC960_V1_PR:
1604       strcpy(Controller->ModelName, "DAC960PR");
1605       break;
1606     case DAC960_V1_PT:
1607       strcpy(Controller->ModelName, "DAC960PT");
1608       break;
1609     case DAC960_V1_PTL0:
1610       strcpy(Controller->ModelName, "DAC960PTL0");
1611       break;
1612     case DAC960_V1_PRL:
1613       strcpy(Controller->ModelName, "DAC960PRL");
1614       break;
1615     case DAC960_V1_PTL1:
1616       strcpy(Controller->ModelName, "DAC960PTL1");
1617       break;
1618     case DAC960_V1_1164P:
1619       strcpy(Controller->ModelName, "DAC1164P");
1620       break;
1621     default:
1622       free_dma_loaf(Controller->PCIDevice, &local_dma);
1623       return DAC960_Failure(Controller, "MODEL VERIFICATION");
1624     }
1625   strcpy(Controller->FullModelName, "Mylex ");
1626   strcat(Controller->FullModelName, Controller->ModelName);
1627   /*
1628     Initialize the Controller Firmware Version field and verify that it
1629     is a supported firmware version.  The supported firmware versions are:
1630
1631     DAC1164P                5.06 and above
1632     DAC960PTL/PRL/PJ/PG     4.06 and above
1633     DAC960PU/PD/PL          3.51 and above
1634     DAC960PU/PD/PL/P        2.73 and above
1635   */
1636 #if defined(CONFIG_ALPHA)
1637   /*
1638     DEC Alpha machines were often equipped with DAC960 cards that were
1639     OEMed from Mylex, and had their own custom firmware. Version 2.70,
1640     the last custom FW revision to be released by DEC for these older
1641     controllers, appears to work quite well with this driver.
1642
1643     Cards tested successfully were several versions each of the PD and
1644     PU, called by DEC the KZPSC and KZPAC, respectively, and having
1645     the Manufacturer Numbers (from Mylex), usually on a sticker on the
1646     back of the board, of:
1647
1648     KZPSC:  D040347 (1-channel) or D040348 (2-channel) or D040349 (3-channel)
1649     KZPAC:  D040395 (1-channel) or D040396 (2-channel) or D040397 (3-channel)
1650   */
1651 # define FIRMWARE_27X   "2.70"
1652 #else
1653 # define FIRMWARE_27X   "2.73"
1654 #endif
1655
1656   if (Enquiry2->FirmwareID.MajorVersion == 0)
1657     {
1658       Enquiry2->FirmwareID.MajorVersion =
1659         Controller->V1.Enquiry.MajorFirmwareVersion;
1660       Enquiry2->FirmwareID.MinorVersion =
1661         Controller->V1.Enquiry.MinorFirmwareVersion;
1662       Enquiry2->FirmwareID.FirmwareType = '0';
1663       Enquiry2->FirmwareID.TurnID = 0;
1664     }
1665   sprintf(Controller->FirmwareVersion, "%d.%02d-%c-%02d",
1666           Enquiry2->FirmwareID.MajorVersion, Enquiry2->FirmwareID.MinorVersion,
1667           Enquiry2->FirmwareID.FirmwareType, Enquiry2->FirmwareID.TurnID);
1668   if (!((Controller->FirmwareVersion[0] == '5' &&
1669          strcmp(Controller->FirmwareVersion, "5.06") >= 0) ||
1670         (Controller->FirmwareVersion[0] == '4' &&
1671          strcmp(Controller->FirmwareVersion, "4.06") >= 0) ||
1672         (Controller->FirmwareVersion[0] == '3' &&
1673          strcmp(Controller->FirmwareVersion, "3.51") >= 0) ||
1674         (Controller->FirmwareVersion[0] == '2' &&
1675          strcmp(Controller->FirmwareVersion, FIRMWARE_27X) >= 0)))
1676     {
1677       DAC960_Failure(Controller, "FIRMWARE VERSION VERIFICATION");
1678       DAC960_Error("Firmware Version = '%s'\n", Controller,
1679                    Controller->FirmwareVersion);
1680       free_dma_loaf(Controller->PCIDevice, &local_dma);
1681       return false;
1682     }
1683   /*
1684     Initialize the Controller Channels, Targets, Memory Size, and SAF-TE
1685     Enclosure Management Enabled fields.
1686   */
1687   Controller->Channels = Enquiry2->ActualChannels;
1688   Controller->Targets = Enquiry2->MaxTargets;
1689   Controller->MemorySize = Enquiry2->MemorySize >> 20;
1690   Controller->V1.SAFTE_EnclosureManagementEnabled =
1691     (Enquiry2->FaultManagementType == DAC960_V1_SAFTE);
1692   /*
1693     Initialize the Controller Queue Depth, Driver Queue Depth, Logical Drive
1694     Count, Maximum Blocks per Command, Controller Scatter/Gather Limit, and
1695     Driver Scatter/Gather Limit.  The Driver Queue Depth must be at most one
1696     less than the Controller Queue Depth to allow for an automatic drive
1697     rebuild operation.
1698   */
1699   Controller->ControllerQueueDepth = Controller->V1.Enquiry.MaxCommands;
1700   Controller->DriverQueueDepth = Controller->ControllerQueueDepth - 1;
1701   if (Controller->DriverQueueDepth > DAC960_MaxDriverQueueDepth)
1702     Controller->DriverQueueDepth = DAC960_MaxDriverQueueDepth;
1703   Controller->LogicalDriveCount =
1704     Controller->V1.Enquiry.NumberOfLogicalDrives;
1705   Controller->MaxBlocksPerCommand = Enquiry2->MaxBlocksPerCommand;
1706   Controller->ControllerScatterGatherLimit = Enquiry2->MaxScatterGatherEntries;
1707   Controller->DriverScatterGatherLimit =
1708     Controller->ControllerScatterGatherLimit;
1709   if (Controller->DriverScatterGatherLimit > DAC960_V1_ScatterGatherLimit)
1710     Controller->DriverScatterGatherLimit = DAC960_V1_ScatterGatherLimit;
1711   /*
1712     Initialize the Stripe Size, Segment Size, and Geometry Translation.
1713   */
1714   Controller->V1.StripeSize = Config2->BlocksPerStripe * Config2->BlockFactor
1715                               >> (10 - DAC960_BlockSizeBits);
1716   Controller->V1.SegmentSize = Config2->BlocksPerCacheLine * Config2->BlockFactor
1717                                >> (10 - DAC960_BlockSizeBits);
1718   switch (Config2->DriveGeometry)
1719     {
1720     case DAC960_V1_Geometry_128_32:
1721       Controller->V1.GeometryTranslationHeads = 128;
1722       Controller->V1.GeometryTranslationSectors = 32;
1723       break;
1724     case DAC960_V1_Geometry_255_63:
1725       Controller->V1.GeometryTranslationHeads = 255;
1726       Controller->V1.GeometryTranslationSectors = 63;
1727       break;
1728     default:
1729       free_dma_loaf(Controller->PCIDevice, &local_dma);
1730       return DAC960_Failure(Controller, "CONFIG2 DRIVE GEOMETRY");
1731     }
1732   /*
1733     Initialize the Background Initialization Status.
1734   */
1735   if ((Controller->FirmwareVersion[0] == '4' &&
1736       strcmp(Controller->FirmwareVersion, "4.08") >= 0) ||
1737       (Controller->FirmwareVersion[0] == '5' &&
1738        strcmp(Controller->FirmwareVersion, "5.08") >= 0))
1739     {
1740       Controller->V1.BackgroundInitializationStatusSupported = true;
1741       DAC960_V1_ExecuteType3B(Controller,
1742                               DAC960_V1_BackgroundInitializationControl, 0x20,
1743                               Controller->
1744                                V1.BackgroundInitializationStatusDMA);
1745       memcpy(&Controller->V1.LastBackgroundInitializationStatus,
1746                 Controller->V1.BackgroundInitializationStatus,
1747                 sizeof(DAC960_V1_BackgroundInitializationStatus_T));
1748     }
1749   /*
1750     Initialize the Logical Drive Initially Accessible flag.
1751   */
1752   for (LogicalDriveNumber = 0;
1753        LogicalDriveNumber < Controller->LogicalDriveCount;
1754        LogicalDriveNumber++)
1755     if (Controller->V1.LogicalDriveInformation
1756                        [LogicalDriveNumber].LogicalDriveState !=
1757         DAC960_V1_LogicalDrive_Offline)
1758       Controller->LogicalDriveInitiallyAccessible[LogicalDriveNumber] = true;
1759   Controller->V1.LastRebuildStatus = DAC960_V1_NoRebuildOrCheckInProgress;
1760   free_dma_loaf(Controller->PCIDevice, &local_dma);
1761   return true;
1762 }
1763
1764
1765 /*
1766   DAC960_V2_ReadControllerConfiguration reads the Configuration Information
1767   from DAC960 V2 Firmware Controllers and initializes the Controller structure.
1768 */
1769
1770 static boolean DAC960_V2_ReadControllerConfiguration(DAC960_Controller_T
1771                                                      *Controller)
1772 {
1773   DAC960_V2_ControllerInfo_T *ControllerInfo =
1774                 &Controller->V2.ControllerInformation;
1775   unsigned short LogicalDeviceNumber = 0;
1776   int ModelNameLength;
1777
1778   /* Get data into dma-able area, then copy into permanant location */
1779   if (!DAC960_V2_NewControllerInfo(Controller))
1780     return DAC960_Failure(Controller, "GET CONTROLLER INFO");
1781   memcpy(ControllerInfo, Controller->V2.NewControllerInformation,
1782                         sizeof(DAC960_V2_ControllerInfo_T));
1783
1784
1785   if (!DAC960_V2_GeneralInfo(Controller))
1786     return DAC960_Failure(Controller, "GET HEALTH STATUS");
1787
1788   /*
1789     Initialize the Controller Model Name and Full Model Name fields.
1790   */
1791   ModelNameLength = sizeof(ControllerInfo->ControllerName);
1792   if (ModelNameLength > sizeof(Controller->ModelName)-1)
1793     ModelNameLength = sizeof(Controller->ModelName)-1;
1794   memcpy(Controller->ModelName, ControllerInfo->ControllerName,
1795          ModelNameLength);
1796   ModelNameLength--;
1797   while (Controller->ModelName[ModelNameLength] == ' ' ||
1798          Controller->ModelName[ModelNameLength] == '\0')
1799     ModelNameLength--;
1800   Controller->ModelName[++ModelNameLength] = '\0';
1801   strcpy(Controller->FullModelName, "Mylex ");
1802   strcat(Controller->FullModelName, Controller->ModelName);
1803   /*
1804     Initialize the Controller Firmware Version field.
1805   */
1806   sprintf(Controller->FirmwareVersion, "%d.%02d-%02d",
1807           ControllerInfo->FirmwareMajorVersion,
1808           ControllerInfo->FirmwareMinorVersion,
1809           ControllerInfo->FirmwareTurnNumber);
1810   if (ControllerInfo->FirmwareMajorVersion == 6 &&
1811       ControllerInfo->FirmwareMinorVersion == 0 &&
1812       ControllerInfo->FirmwareTurnNumber < 1)
1813     {
1814       DAC960_Info("FIRMWARE VERSION %s DOES NOT PROVIDE THE CONTROLLER\n",
1815                   Controller, Controller->FirmwareVersion);
1816       DAC960_Info("STATUS MONITORING FUNCTIONALITY NEEDED BY THIS DRIVER.\n",
1817                   Controller);
1818       DAC960_Info("PLEASE UPGRADE TO VERSION 6.00-01 OR ABOVE.\n",
1819                   Controller);
1820     }
1821   /*
1822     Initialize the Controller Channels, Targets, and Memory Size.
1823   */
1824   Controller->Channels = ControllerInfo->NumberOfPhysicalChannelsPresent;
1825   Controller->Targets =
1826     ControllerInfo->MaximumTargetsPerChannel
1827                     [ControllerInfo->NumberOfPhysicalChannelsPresent-1];
1828   Controller->MemorySize = ControllerInfo->MemorySizeMB;
1829   /*
1830     Initialize the Controller Queue Depth, Driver Queue Depth, Logical Drive
1831     Count, Maximum Blocks per Command, Controller Scatter/Gather Limit, and
1832     Driver Scatter/Gather Limit.  The Driver Queue Depth must be at most one
1833     less than the Controller Queue Depth to allow for an automatic drive
1834     rebuild operation.
1835   */
1836   Controller->ControllerQueueDepth = ControllerInfo->MaximumParallelCommands;
1837   Controller->DriverQueueDepth = Controller->ControllerQueueDepth - 1;
1838   if (Controller->DriverQueueDepth > DAC960_MaxDriverQueueDepth)
1839     Controller->DriverQueueDepth = DAC960_MaxDriverQueueDepth;
1840   Controller->LogicalDriveCount = ControllerInfo->LogicalDevicesPresent;
1841   Controller->MaxBlocksPerCommand =
1842     ControllerInfo->MaximumDataTransferSizeInBlocks;
1843   Controller->ControllerScatterGatherLimit =
1844     ControllerInfo->MaximumScatterGatherEntries;
1845   Controller->DriverScatterGatherLimit =
1846     Controller->ControllerScatterGatherLimit;
1847   if (Controller->DriverScatterGatherLimit > DAC960_V2_ScatterGatherLimit)
1848     Controller->DriverScatterGatherLimit = DAC960_V2_ScatterGatherLimit;
1849   /*
1850     Initialize the Logical Device Information.
1851   */
1852   while (true)
1853     {
1854       DAC960_V2_LogicalDeviceInfo_T *NewLogicalDeviceInfo =
1855         Controller->V2.NewLogicalDeviceInformation;
1856       DAC960_V2_LogicalDeviceInfo_T *LogicalDeviceInfo;
1857       DAC960_V2_PhysicalDevice_T PhysicalDevice;
1858
1859       if (!DAC960_V2_NewLogicalDeviceInfo(Controller, LogicalDeviceNumber))
1860         break;
1861       LogicalDeviceNumber = NewLogicalDeviceInfo->LogicalDeviceNumber;
1862       if (LogicalDeviceNumber >= DAC960_MaxLogicalDrives) {
1863         DAC960_Error("DAC960: Logical Drive Number %d not supported\n",
1864                        Controller, LogicalDeviceNumber);
1865                 break;
1866       }
1867       if (NewLogicalDeviceInfo->DeviceBlockSizeInBytes != DAC960_BlockSize) {
1868         DAC960_Error("DAC960: Logical Drive Block Size %d not supported\n",
1869               Controller, NewLogicalDeviceInfo->DeviceBlockSizeInBytes);
1870         LogicalDeviceNumber++;
1871         continue;
1872       }
1873       PhysicalDevice.Controller = 0;
1874       PhysicalDevice.Channel = NewLogicalDeviceInfo->Channel;
1875       PhysicalDevice.TargetID = NewLogicalDeviceInfo->TargetID;
1876       PhysicalDevice.LogicalUnit = NewLogicalDeviceInfo->LogicalUnit;
1877       Controller->V2.LogicalDriveToVirtualDevice[LogicalDeviceNumber] =
1878         PhysicalDevice;
1879       if (NewLogicalDeviceInfo->LogicalDeviceState !=
1880           DAC960_V2_LogicalDevice_Offline)
1881         Controller->LogicalDriveInitiallyAccessible[LogicalDeviceNumber] = true;
1882       LogicalDeviceInfo = (DAC960_V2_LogicalDeviceInfo_T *)
1883         kmalloc(sizeof(DAC960_V2_LogicalDeviceInfo_T), GFP_ATOMIC);
1884       if (LogicalDeviceInfo == NULL)
1885         return DAC960_Failure(Controller, "LOGICAL DEVICE ALLOCATION");
1886       Controller->V2.LogicalDeviceInformation[LogicalDeviceNumber] =
1887         LogicalDeviceInfo;
1888       memcpy(LogicalDeviceInfo, NewLogicalDeviceInfo,
1889              sizeof(DAC960_V2_LogicalDeviceInfo_T));
1890       LogicalDeviceNumber++;
1891     }
1892   return true;
1893 }
1894
1895
1896 /*
1897   DAC960_ReportControllerConfiguration reports the Configuration Information
1898   for Controller.
1899 */
1900
1901 static boolean DAC960_ReportControllerConfiguration(DAC960_Controller_T
1902                                                     *Controller)
1903 {
1904   DAC960_Info("Configuring Mylex %s PCI RAID Controller\n",
1905               Controller, Controller->ModelName);
1906   DAC960_Info("  Firmware Version: %s, Channels: %d, Memory Size: %dMB\n",
1907               Controller, Controller->FirmwareVersion,
1908               Controller->Channels, Controller->MemorySize);
1909   DAC960_Info("  PCI Bus: %d, Device: %d, Function: %d, I/O Address: ",
1910               Controller, Controller->Bus,
1911               Controller->Device, Controller->Function);
1912   if (Controller->IO_Address == 0)
1913     DAC960_Info("Unassigned\n", Controller);
1914   else DAC960_Info("0x%X\n", Controller, Controller->IO_Address);
1915   DAC960_Info("  PCI Address: 0x%X mapped at 0x%lX, IRQ Channel: %d\n",
1916               Controller, Controller->PCI_Address,
1917               (unsigned long) Controller->BaseAddress,
1918               Controller->IRQ_Channel);
1919   DAC960_Info("  Controller Queue Depth: %d, "
1920               "Maximum Blocks per Command: %d\n",
1921               Controller, Controller->ControllerQueueDepth,
1922               Controller->MaxBlocksPerCommand);
1923   DAC960_Info("  Driver Queue Depth: %d, "
1924               "Scatter/Gather Limit: %d of %d Segments\n",
1925               Controller, Controller->DriverQueueDepth,
1926               Controller->DriverScatterGatherLimit,
1927               Controller->ControllerScatterGatherLimit);
1928   if (Controller->FirmwareType == DAC960_V1_Controller)
1929     {
1930       DAC960_Info("  Stripe Size: %dKB, Segment Size: %dKB, "
1931                   "BIOS Geometry: %d/%d\n", Controller,
1932                   Controller->V1.StripeSize,
1933                   Controller->V1.SegmentSize,
1934                   Controller->V1.GeometryTranslationHeads,
1935                   Controller->V1.GeometryTranslationSectors);
1936       if (Controller->V1.SAFTE_EnclosureManagementEnabled)
1937         DAC960_Info("  SAF-TE Enclosure Management Enabled\n", Controller);
1938     }
1939   return true;
1940 }
1941
1942
1943 /*
1944   DAC960_V1_ReadDeviceConfiguration reads the Device Configuration Information
1945   for DAC960 V1 Firmware Controllers by requesting the SCSI Inquiry and SCSI
1946   Inquiry Unit Serial Number information for each device connected to
1947   Controller.
1948 */
1949
1950 static boolean DAC960_V1_ReadDeviceConfiguration(DAC960_Controller_T
1951                                                  *Controller)
1952 {
1953   struct dma_loaf local_dma;
1954
1955   dma_addr_t DCDBs_dma[DAC960_V1_MaxChannels];
1956   DAC960_V1_DCDB_T *DCDBs_cpu[DAC960_V1_MaxChannels];
1957
1958   dma_addr_t SCSI_Inquiry_dma[DAC960_V1_MaxChannels];
1959   DAC960_SCSI_Inquiry_T *SCSI_Inquiry_cpu[DAC960_V1_MaxChannels];
1960
1961   dma_addr_t SCSI_NewInquiryUnitSerialNumberDMA[DAC960_V1_MaxChannels];
1962   DAC960_SCSI_Inquiry_UnitSerialNumber_T *SCSI_NewInquiryUnitSerialNumberCPU[DAC960_V1_MaxChannels];
1963
1964   struct completion Completions[DAC960_V1_MaxChannels];
1965   unsigned long flags;
1966   int Channel, TargetID;
1967
1968   if (!init_dma_loaf(Controller->PCIDevice, &local_dma,
1969                 DAC960_V1_MaxChannels*(sizeof(DAC960_V1_DCDB_T) +
1970                         sizeof(DAC960_SCSI_Inquiry_T) +
1971                         sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T))))
1972      return DAC960_Failure(Controller,
1973                         "DMA ALLOCATION FAILED IN ReadDeviceConfiguration");
1974
1975   for (Channel = 0; Channel < Controller->Channels; Channel++) {
1976         DCDBs_cpu[Channel] = slice_dma_loaf(&local_dma,
1977                         sizeof(DAC960_V1_DCDB_T), DCDBs_dma + Channel);
1978         SCSI_Inquiry_cpu[Channel] = slice_dma_loaf(&local_dma,
1979                         sizeof(DAC960_SCSI_Inquiry_T),
1980                         SCSI_Inquiry_dma + Channel);
1981         SCSI_NewInquiryUnitSerialNumberCPU[Channel] = slice_dma_loaf(&local_dma,
1982                         sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T),
1983                         SCSI_NewInquiryUnitSerialNumberDMA + Channel);
1984   }
1985
1986   for (TargetID = 0; TargetID < Controller->Targets; TargetID++)
1987     {
1988       /*
1989        * For each channel, submit a probe for a device on that channel.
1990        * The timeout interval for a device that is present is 10 seconds.
1991        * With this approach, the timeout periods can elapse in parallel
1992        * on each channel.
1993        */
1994       for (Channel = 0; Channel < Controller->Channels; Channel++)
1995         {
1996           dma_addr_t NewInquiryStandardDataDMA = SCSI_Inquiry_dma[Channel];
1997           DAC960_V1_DCDB_T *DCDB = DCDBs_cpu[Channel];
1998           dma_addr_t DCDB_dma = DCDBs_dma[Channel];
1999           DAC960_Command_T *Command = Controller->Commands[Channel];
2000           struct completion *Completion = &Completions[Channel];
2001
2002           init_completion(Completion);
2003           DAC960_V1_ClearCommand(Command);
2004           Command->CommandType = DAC960_ImmediateCommand;
2005           Command->Completion = Completion;
2006           Command->V1.CommandMailbox.Type3.CommandOpcode = DAC960_V1_DCDB;
2007           Command->V1.CommandMailbox.Type3.BusAddress = DCDB_dma;
2008           DCDB->Channel = Channel;
2009           DCDB->TargetID = TargetID;
2010           DCDB->Direction = DAC960_V1_DCDB_DataTransferDeviceToSystem;
2011           DCDB->EarlyStatus = false;
2012           DCDB->Timeout = DAC960_V1_DCDB_Timeout_10_seconds;
2013           DCDB->NoAutomaticRequestSense = false;
2014           DCDB->DisconnectPermitted = true;
2015           DCDB->TransferLength = sizeof(DAC960_SCSI_Inquiry_T);
2016           DCDB->BusAddress = NewInquiryStandardDataDMA;
2017           DCDB->CDBLength = 6;
2018           DCDB->TransferLengthHigh4 = 0;
2019           DCDB->SenseLength = sizeof(DCDB->SenseData);
2020           DCDB->CDB[0] = 0x12; /* INQUIRY */
2021           DCDB->CDB[1] = 0; /* EVPD = 0 */
2022           DCDB->CDB[2] = 0; /* Page Code */
2023           DCDB->CDB[3] = 0; /* Reserved */
2024           DCDB->CDB[4] = sizeof(DAC960_SCSI_Inquiry_T);
2025           DCDB->CDB[5] = 0; /* Control */
2026
2027           spin_lock_irqsave(&Controller->queue_lock, flags);
2028           DAC960_QueueCommand(Command);
2029           spin_unlock_irqrestore(&Controller->queue_lock, flags);
2030         }
2031       /*
2032        * Wait for the problems submitted in the previous loop
2033        * to complete.  On the probes that are successful,
2034        * get the serial number of the device that was found.
2035        */
2036       for (Channel = 0; Channel < Controller->Channels; Channel++)
2037         {
2038           DAC960_SCSI_Inquiry_T *InquiryStandardData =
2039             &Controller->V1.InquiryStandardData[Channel][TargetID];
2040           DAC960_SCSI_Inquiry_T *NewInquiryStandardData = SCSI_Inquiry_cpu[Channel];
2041           dma_addr_t NewInquiryUnitSerialNumberDMA =
2042                         SCSI_NewInquiryUnitSerialNumberDMA[Channel];
2043           DAC960_SCSI_Inquiry_UnitSerialNumber_T *NewInquiryUnitSerialNumber =
2044                         SCSI_NewInquiryUnitSerialNumberCPU[Channel];
2045           DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
2046             &Controller->V1.InquiryUnitSerialNumber[Channel][TargetID];
2047           DAC960_Command_T *Command = Controller->Commands[Channel];
2048           DAC960_V1_DCDB_T *DCDB = DCDBs_cpu[Channel];
2049           struct completion *Completion = &Completions[Channel];
2050
2051           wait_for_completion(Completion);
2052
2053           if (Command->V1.CommandStatus != DAC960_V1_NormalCompletion) {
2054             memset(InquiryStandardData, 0, sizeof(DAC960_SCSI_Inquiry_T));
2055             InquiryStandardData->PeripheralDeviceType = 0x1F;
2056             continue;
2057           } else
2058             memcpy(InquiryStandardData, NewInquiryStandardData, sizeof(DAC960_SCSI_Inquiry_T));
2059
2060           /* Preserve Channel and TargetID values from the previous loop */
2061           Command->Completion = Completion;
2062           DCDB->TransferLength = sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T);
2063           DCDB->BusAddress = NewInquiryUnitSerialNumberDMA;
2064           DCDB->SenseLength = sizeof(DCDB->SenseData);
2065           DCDB->CDB[0] = 0x12; /* INQUIRY */
2066           DCDB->CDB[1] = 1; /* EVPD = 1 */
2067           DCDB->CDB[2] = 0x80; /* Page Code */
2068           DCDB->CDB[3] = 0; /* Reserved */
2069           DCDB->CDB[4] = sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T);
2070           DCDB->CDB[5] = 0; /* Control */
2071
2072           spin_lock_irqsave(&Controller->queue_lock, flags);
2073           DAC960_QueueCommand(Command);
2074           spin_unlock_irqrestore(&Controller->queue_lock, flags);
2075           wait_for_completion(Completion);
2076
2077           if (Command->V1.CommandStatus != DAC960_V1_NormalCompletion) {
2078                 memset(InquiryUnitSerialNumber, 0,
2079                         sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
2080                 InquiryUnitSerialNumber->PeripheralDeviceType = 0x1F;
2081           } else
2082                 memcpy(InquiryUnitSerialNumber, NewInquiryUnitSerialNumber,
2083                         sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
2084         }
2085     }
2086     free_dma_loaf(Controller->PCIDevice, &local_dma);
2087   return true;
2088 }
2089
2090
2091 /*
2092   DAC960_V2_ReadDeviceConfiguration reads the Device Configuration Information
2093   for DAC960 V2 Firmware Controllers by requesting the Physical Device
2094   Information and SCSI Inquiry Unit Serial Number information for each
2095   device connected to Controller.
2096 */
2097
2098 static boolean DAC960_V2_ReadDeviceConfiguration(DAC960_Controller_T
2099                                                  *Controller)
2100 {
2101   unsigned char Channel = 0, TargetID = 0, LogicalUnit = 0;
2102   unsigned short PhysicalDeviceIndex = 0;
2103
2104   while (true)
2105     {
2106       DAC960_V2_PhysicalDeviceInfo_T *NewPhysicalDeviceInfo =
2107                 Controller->V2.NewPhysicalDeviceInformation;
2108       DAC960_V2_PhysicalDeviceInfo_T *PhysicalDeviceInfo;
2109       DAC960_SCSI_Inquiry_UnitSerialNumber_T *NewInquiryUnitSerialNumber =
2110                 Controller->V2.NewInquiryUnitSerialNumber;
2111       DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber;
2112
2113       if (!DAC960_V2_NewPhysicalDeviceInfo(Controller, Channel, TargetID, LogicalUnit))
2114           break;
2115
2116       PhysicalDeviceInfo = (DAC960_V2_PhysicalDeviceInfo_T *)
2117                 kmalloc(sizeof(DAC960_V2_PhysicalDeviceInfo_T), GFP_ATOMIC);
2118       if (PhysicalDeviceInfo == NULL)
2119                 return DAC960_Failure(Controller, "PHYSICAL DEVICE ALLOCATION");
2120       Controller->V2.PhysicalDeviceInformation[PhysicalDeviceIndex] =
2121                 PhysicalDeviceInfo;
2122       memcpy(PhysicalDeviceInfo, NewPhysicalDeviceInfo,
2123                 sizeof(DAC960_V2_PhysicalDeviceInfo_T));
2124
2125       InquiryUnitSerialNumber = (DAC960_SCSI_Inquiry_UnitSerialNumber_T *)
2126         kmalloc(sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T), GFP_ATOMIC);
2127       if (InquiryUnitSerialNumber == NULL) {
2128         kfree(PhysicalDeviceInfo);
2129         return DAC960_Failure(Controller, "SERIAL NUMBER ALLOCATION");
2130       }
2131       Controller->V2.InquiryUnitSerialNumber[PhysicalDeviceIndex] =
2132                 InquiryUnitSerialNumber;
2133
2134       Channel = NewPhysicalDeviceInfo->Channel;
2135       TargetID = NewPhysicalDeviceInfo->TargetID;
2136       LogicalUnit = NewPhysicalDeviceInfo->LogicalUnit;
2137
2138       /*
2139          Some devices do NOT have Unit Serial Numbers.
2140          This command fails for them.  But, we still want to
2141          remember those devices are there.  Construct a
2142          UnitSerialNumber structure for the failure case.
2143       */
2144       if (!DAC960_V2_NewInquiryUnitSerialNumber(Controller, Channel, TargetID, LogicalUnit)) {
2145         memset(InquiryUnitSerialNumber, 0,
2146              sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
2147         InquiryUnitSerialNumber->PeripheralDeviceType = 0x1F;
2148       } else
2149         memcpy(InquiryUnitSerialNumber, NewInquiryUnitSerialNumber,
2150                 sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
2151
2152       PhysicalDeviceIndex++;
2153       LogicalUnit++;
2154     }
2155   return true;
2156 }
2157
2158
2159 /*
2160   DAC960_SanitizeInquiryData sanitizes the Vendor, Model, Revision, and
2161   Product Serial Number fields of the Inquiry Standard Data and Inquiry
2162   Unit Serial Number structures.
2163 */
2164
2165 static void DAC960_SanitizeInquiryData(DAC960_SCSI_Inquiry_T
2166                                          *InquiryStandardData,
2167                                        DAC960_SCSI_Inquiry_UnitSerialNumber_T
2168                                          *InquiryUnitSerialNumber,
2169                                        unsigned char *Vendor,
2170                                        unsigned char *Model,
2171                                        unsigned char *Revision,
2172                                        unsigned char *SerialNumber)
2173 {
2174   int SerialNumberLength, i;
2175   if (InquiryStandardData->PeripheralDeviceType == 0x1F) return;
2176   for (i = 0; i < sizeof(InquiryStandardData->VendorIdentification); i++)
2177     {
2178       unsigned char VendorCharacter =
2179         InquiryStandardData->VendorIdentification[i];
2180       Vendor[i] = (VendorCharacter >= ' ' && VendorCharacter <= '~'
2181                    ? VendorCharacter : ' ');
2182     }
2183   Vendor[sizeof(InquiryStandardData->VendorIdentification)] = '\0';
2184   for (i = 0; i < sizeof(InquiryStandardData->ProductIdentification); i++)
2185     {
2186       unsigned char ModelCharacter =
2187         InquiryStandardData->ProductIdentification[i];
2188       Model[i] = (ModelCharacter >= ' ' && ModelCharacter <= '~'
2189                   ? ModelCharacter : ' ');
2190     }
2191   Model[sizeof(InquiryStandardData->ProductIdentification)] = '\0';
2192   for (i = 0; i < sizeof(InquiryStandardData->ProductRevisionLevel); i++)
2193     {
2194       unsigned char RevisionCharacter =
2195         InquiryStandardData->ProductRevisionLevel[i];
2196       Revision[i] = (RevisionCharacter >= ' ' && RevisionCharacter <= '~'
2197                      ? RevisionCharacter : ' ');
2198     }
2199   Revision[sizeof(InquiryStandardData->ProductRevisionLevel)] = '\0';
2200   if (InquiryUnitSerialNumber->PeripheralDeviceType == 0x1F) return;
2201   SerialNumberLength = InquiryUnitSerialNumber->PageLength;
2202   if (SerialNumberLength >
2203       sizeof(InquiryUnitSerialNumber->ProductSerialNumber))
2204     SerialNumberLength = sizeof(InquiryUnitSerialNumber->ProductSerialNumber);
2205   for (i = 0; i < SerialNumberLength; i++)
2206     {
2207       unsigned char SerialNumberCharacter =
2208         InquiryUnitSerialNumber->ProductSerialNumber[i];
2209       SerialNumber[i] =
2210         (SerialNumberCharacter >= ' ' && SerialNumberCharacter <= '~'
2211          ? SerialNumberCharacter : ' ');
2212     }
2213   SerialNumber[SerialNumberLength] = '\0';
2214 }
2215
2216
2217 /*
2218   DAC960_V1_ReportDeviceConfiguration reports the Device Configuration
2219   Information for DAC960 V1 Firmware Controllers.
2220 */
2221
2222 static boolean DAC960_V1_ReportDeviceConfiguration(DAC960_Controller_T
2223                                                    *Controller)
2224 {
2225   int LogicalDriveNumber, Channel, TargetID;
2226   DAC960_Info("  Physical Devices:\n", Controller);
2227   for (Channel = 0; Channel < Controller->Channels; Channel++)
2228     for (TargetID = 0; TargetID < Controller->Targets; TargetID++)
2229       {
2230         DAC960_SCSI_Inquiry_T *InquiryStandardData =
2231           &Controller->V1.InquiryStandardData[Channel][TargetID];
2232         DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
2233           &Controller->V1.InquiryUnitSerialNumber[Channel][TargetID];
2234         DAC960_V1_DeviceState_T *DeviceState =
2235           &Controller->V1.DeviceState[Channel][TargetID];
2236         DAC960_V1_ErrorTableEntry_T *ErrorEntry =
2237           &Controller->V1.ErrorTable.ErrorTableEntries[Channel][TargetID];
2238         char Vendor[1+sizeof(InquiryStandardData->VendorIdentification)];
2239         char Model[1+sizeof(InquiryStandardData->ProductIdentification)];
2240         char Revision[1+sizeof(InquiryStandardData->ProductRevisionLevel)];
2241         char SerialNumber[1+sizeof(InquiryUnitSerialNumber
2242                                    ->ProductSerialNumber)];
2243         if (InquiryStandardData->PeripheralDeviceType == 0x1F) continue;
2244         DAC960_SanitizeInquiryData(InquiryStandardData, InquiryUnitSerialNumber,
2245                                    Vendor, Model, Revision, SerialNumber);
2246         DAC960_Info("    %d:%d%s Vendor: %s  Model: %s  Revision: %s\n",
2247                     Controller, Channel, TargetID, (TargetID < 10 ? " " : ""),
2248                     Vendor, Model, Revision);
2249         if (InquiryUnitSerialNumber->PeripheralDeviceType != 0x1F)
2250           DAC960_Info("         Serial Number: %s\n", Controller, SerialNumber);
2251         if (DeviceState->Present &&
2252             DeviceState->DeviceType == DAC960_V1_DiskType)
2253           {
2254             if (Controller->V1.DeviceResetCount[Channel][TargetID] > 0)
2255               DAC960_Info("         Disk Status: %s, %u blocks, %d resets\n",
2256                           Controller,
2257                           (DeviceState->DeviceState == DAC960_V1_Device_Dead
2258                            ? "Dead"
2259                            : DeviceState->DeviceState
2260                              == DAC960_V1_Device_WriteOnly
2261                              ? "Write-Only"
2262                              : DeviceState->DeviceState
2263                                == DAC960_V1_Device_Online
2264                                ? "Online" : "Standby"),
2265                           DeviceState->DiskSize,
2266                           Controller->V1.DeviceResetCount[Channel][TargetID]);
2267             else
2268               DAC960_Info("         Disk Status: %s, %u blocks\n", Controller,
2269                           (DeviceState->DeviceState == DAC960_V1_Device_Dead
2270                            ? "Dead"
2271                            : DeviceState->DeviceState
2272                              == DAC960_V1_Device_WriteOnly
2273                              ? "Write-Only"
2274                              : DeviceState->DeviceState
2275                                == DAC960_V1_Device_Online
2276                                ? "Online" : "Standby"),
2277                           DeviceState->DiskSize);
2278           }
2279         if (ErrorEntry->ParityErrorCount > 0 ||
2280             ErrorEntry->SoftErrorCount > 0 ||
2281             ErrorEntry->HardErrorCount > 0 ||
2282             ErrorEntry->MiscErrorCount > 0)
2283           DAC960_Info("         Errors - Parity: %d, Soft: %d, "
2284                       "Hard: %d, Misc: %d\n", Controller,
2285                       ErrorEntry->ParityErrorCount,
2286                       ErrorEntry->SoftErrorCount,
2287                       ErrorEntry->HardErrorCount,
2288                       ErrorEntry->MiscErrorCount);
2289       }
2290   DAC960_Info("  Logical Drives:\n", Controller);
2291   for (LogicalDriveNumber = 0;
2292        LogicalDriveNumber < Controller->LogicalDriveCount;
2293        LogicalDriveNumber++)
2294     {
2295       DAC960_V1_LogicalDriveInformation_T *LogicalDriveInformation =
2296         &Controller->V1.LogicalDriveInformation[LogicalDriveNumber];
2297       DAC960_Info("    /dev/rd/c%dd%d: RAID-%d, %s, %u blocks, %s\n",
2298                   Controller, Controller->ControllerNumber, LogicalDriveNumber,
2299                   LogicalDriveInformation->RAIDLevel,
2300                   (LogicalDriveInformation->LogicalDriveState
2301                    == DAC960_V1_LogicalDrive_Online
2302                    ? "Online"
2303                    : LogicalDriveInformation->LogicalDriveState
2304                      == DAC960_V1_LogicalDrive_Critical
2305                      ? "Critical" : "Offline"),
2306                   LogicalDriveInformation->LogicalDriveSize,
2307                   (LogicalDriveInformation->WriteBack
2308                    ? "Write Back" : "Write Thru"));
2309     }
2310   return true;
2311 }
2312
2313
2314 /*
2315   DAC960_V2_ReportDeviceConfiguration reports the Device Configuration
2316   Information for DAC960 V2 Firmware Controllers.
2317 */
2318
2319 static boolean DAC960_V2_ReportDeviceConfiguration(DAC960_Controller_T
2320                                                    *Controller)
2321 {
2322   int PhysicalDeviceIndex, LogicalDriveNumber;
2323   DAC960_Info("  Physical Devices:\n", Controller);
2324   for (PhysicalDeviceIndex = 0;
2325        PhysicalDeviceIndex < DAC960_V2_MaxPhysicalDevices;
2326        PhysicalDeviceIndex++)
2327     {
2328       DAC960_V2_PhysicalDeviceInfo_T *PhysicalDeviceInfo =
2329         Controller->V2.PhysicalDeviceInformation[PhysicalDeviceIndex];
2330       DAC960_SCSI_Inquiry_T *InquiryStandardData =
2331         (DAC960_SCSI_Inquiry_T *) &PhysicalDeviceInfo->SCSI_InquiryData;
2332       DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
2333         Controller->V2.InquiryUnitSerialNumber[PhysicalDeviceIndex];
2334       char Vendor[1+sizeof(InquiryStandardData->VendorIdentification)];
2335       char Model[1+sizeof(InquiryStandardData->ProductIdentification)];
2336       char Revision[1+sizeof(InquiryStandardData->ProductRevisionLevel)];
2337       char SerialNumber[1+sizeof(InquiryUnitSerialNumber->ProductSerialNumber)];
2338       if (PhysicalDeviceInfo == NULL) break;
2339       DAC960_SanitizeInquiryData(InquiryStandardData, InquiryUnitSerialNumber,
2340                                  Vendor, Model, Revision, SerialNumber);
2341       DAC960_Info("    %d:%d%s Vendor: %s  Model: %s  Revision: %s\n",
2342                   Controller,
2343                   PhysicalDeviceInfo->Channel,
2344                   PhysicalDeviceInfo->TargetID,
2345                   (PhysicalDeviceInfo->TargetID < 10 ? " " : ""),
2346                   Vendor, Model, Revision);
2347       if (PhysicalDeviceInfo->NegotiatedSynchronousMegaTransfers == 0)
2348         DAC960_Info("         %sAsynchronous\n", Controller,
2349                     (PhysicalDeviceInfo->NegotiatedDataWidthBits == 16
2350                      ? "Wide " :""));
2351       else
2352         DAC960_Info("         %sSynchronous at %d MB/sec\n", Controller,
2353                     (PhysicalDeviceInfo->NegotiatedDataWidthBits == 16
2354                      ? "Wide " :""),
2355                     (PhysicalDeviceInfo->NegotiatedSynchronousMegaTransfers
2356                      * PhysicalDeviceInfo->NegotiatedDataWidthBits/8));
2357       if (InquiryUnitSerialNumber->PeripheralDeviceType != 0x1F)
2358         DAC960_Info("         Serial Number: %s\n", Controller, SerialNumber);
2359       if (PhysicalDeviceInfo->PhysicalDeviceState ==
2360           DAC960_V2_Device_Unconfigured)
2361         continue;
2362       DAC960_Info("         Disk Status: %s, %u blocks\n", Controller,
2363                   (PhysicalDeviceInfo->PhysicalDeviceState
2364                    == DAC960_V2_Device_Online
2365                    ? "Online"
2366                    : PhysicalDeviceInfo->PhysicalDeviceState
2367                      == DAC960_V2_Device_Rebuild
2368                      ? "Rebuild"
2369                      : PhysicalDeviceInfo->PhysicalDeviceState
2370                        == DAC960_V2_Device_Missing
2371                        ? "Missing"
2372                        : PhysicalDeviceInfo->PhysicalDeviceState
2373                          == DAC960_V2_Device_Critical
2374                          ? "Critical"
2375                          : PhysicalDeviceInfo->PhysicalDeviceState
2376                            == DAC960_V2_Device_Dead
2377                            ? "Dead"
2378                            : PhysicalDeviceInfo->PhysicalDeviceState
2379                              == DAC960_V2_Device_SuspectedDead
2380                              ? "Suspected-Dead"
2381                              : PhysicalDeviceInfo->PhysicalDeviceState
2382                                == DAC960_V2_Device_CommandedOffline
2383                                ? "Commanded-Offline"
2384                                : PhysicalDeviceInfo->PhysicalDeviceState
2385                                  == DAC960_V2_Device_Standby
2386                                  ? "Standby" : "Unknown"),
2387                   PhysicalDeviceInfo->ConfigurableDeviceSize);
2388       if (PhysicalDeviceInfo->ParityErrors == 0 &&
2389           PhysicalDeviceInfo->SoftErrors == 0 &&
2390           PhysicalDeviceInfo->HardErrors == 0 &&
2391           PhysicalDeviceInfo->MiscellaneousErrors == 0 &&
2392           PhysicalDeviceInfo->CommandTimeouts == 0 &&
2393           PhysicalDeviceInfo->Retries == 0 &&
2394           PhysicalDeviceInfo->Aborts == 0 &&
2395           PhysicalDeviceInfo->PredictedFailuresDetected == 0)
2396         continue;
2397       DAC960_Info("         Errors - Parity: %d, Soft: %d, "
2398                   "Hard: %d, Misc: %d\n", Controller,
2399                   PhysicalDeviceInfo->ParityErrors,
2400                   PhysicalDeviceInfo->SoftErrors,
2401                   PhysicalDeviceInfo->HardErrors,
2402                   PhysicalDeviceInfo->MiscellaneousErrors);
2403       DAC960_Info("                  Timeouts: %d, Retries: %d, "
2404                   "Aborts: %d, Predicted: %d\n", Controller,
2405                   PhysicalDeviceInfo->CommandTimeouts,
2406                   PhysicalDeviceInfo->Retries,
2407                   PhysicalDeviceInfo->Aborts,
2408                   PhysicalDeviceInfo->PredictedFailuresDetected);
2409     }
2410   DAC960_Info("  Logical Drives:\n", Controller);
2411   for (LogicalDriveNumber = 0;
2412        LogicalDriveNumber < DAC960_MaxLogicalDrives;
2413        LogicalDriveNumber++)
2414     {
2415       DAC960_V2_LogicalDeviceInfo_T *LogicalDeviceInfo =
2416         Controller->V2.LogicalDeviceInformation[LogicalDriveNumber];
2417       unsigned char *ReadCacheStatus[] = { "Read Cache Disabled",
2418                                            "Read Cache Enabled",
2419                                            "Read Ahead Enabled",
2420                                            "Intelligent Read Ahead Enabled",
2421                                            "-", "-", "-", "-" };
2422       unsigned char *WriteCacheStatus[] = { "Write Cache Disabled",
2423                                             "Logical Device Read Only",
2424                                             "Write Cache Enabled",
2425                                             "Intelligent Write Cache Enabled",
2426                                             "-", "-", "-", "-" };
2427       unsigned char *GeometryTranslation;
2428       if (LogicalDeviceInfo == NULL) continue;
2429       switch (LogicalDeviceInfo->DriveGeometry)
2430         {
2431         case DAC960_V2_Geometry_128_32:
2432           GeometryTranslation = "128/32";
2433           break;
2434         case DAC960_V2_Geometry_255_63:
2435           GeometryTranslation = "255/63";
2436           break;
2437         default:
2438           GeometryTranslation = "Invalid";
2439           DAC960_Error("Illegal Logical Device Geometry %d\n",
2440                        Controller, LogicalDeviceInfo->DriveGeometry);
2441           break;
2442         }
2443       DAC960_Info("    /dev/rd/c%dd%d: RAID-%d, %s, %u blocks\n",
2444                   Controller, Controller->ControllerNumber, LogicalDriveNumber,
2445                   LogicalDeviceInfo->RAIDLevel,
2446                   (LogicalDeviceInfo->LogicalDeviceState
2447                    == DAC960_V2_LogicalDevice_Online
2448                    ? "Online"
2449                    : LogicalDeviceInfo->LogicalDeviceState
2450                      == DAC960_V2_LogicalDevice_Critical
2451                      ? "Critical" : "Offline"),
2452                   LogicalDeviceInfo->ConfigurableDeviceSize);
2453       DAC960_Info("                  Logical Device %s, BIOS Geometry: %s\n",
2454                   Controller,
2455                   (LogicalDeviceInfo->LogicalDeviceControl
2456                                      .LogicalDeviceInitialized
2457                    ? "Initialized" : "Uninitialized"),
2458                   GeometryTranslation);
2459       if (LogicalDeviceInfo->StripeSize == 0)
2460         {
2461           if (LogicalDeviceInfo->CacheLineSize == 0)
2462             DAC960_Info("                  Stripe Size: N/A, "
2463                         "Segment Size: N/A\n", Controller);
2464           else
2465             DAC960_Info("                  Stripe Size: N/A, "
2466                         "Segment Size: %dKB\n", Controller,
2467                         1 << (LogicalDeviceInfo->CacheLineSize - 2));
2468         }
2469       else
2470         {
2471           if (LogicalDeviceInfo->CacheLineSize == 0)
2472             DAC960_Info("                  Stripe Size: %dKB, "
2473                         "Segment Size: N/A\n", Controller,
2474                         1 << (LogicalDeviceInfo->StripeSize - 2));
2475           else
2476             DAC960_Info("                  Stripe Size: %dKB, "
2477                         "Segment Size: %dKB\n", Controller,
2478                         1 << (LogicalDeviceInfo->StripeSize - 2),
2479                         1 << (LogicalDeviceInfo->CacheLineSize - 2));
2480         }
2481       DAC960_Info("                  %s, %s\n", Controller,
2482                   ReadCacheStatus[
2483                     LogicalDeviceInfo->LogicalDeviceControl.ReadCache],
2484                   WriteCacheStatus[
2485                     LogicalDeviceInfo->LogicalDeviceControl.WriteCache]);
2486       if (LogicalDeviceInfo->SoftErrors > 0 ||
2487           LogicalDeviceInfo->CommandsFailed > 0 ||
2488           LogicalDeviceInfo->DeferredWriteErrors)
2489         DAC960_Info("                  Errors - Soft: %d, Failed: %d, "
2490                     "Deferred Write: %d\n", Controller,
2491                     LogicalDeviceInfo->SoftErrors,
2492                     LogicalDeviceInfo->CommandsFailed,
2493                     LogicalDeviceInfo->DeferredWriteErrors);
2494
2495     }
2496   return true;
2497 }
2498
2499 /*
2500   DAC960_RegisterBlockDevice registers the Block Device structures
2501   associated with Controller.
2502 */
2503
2504 static boolean DAC960_RegisterBlockDevice(DAC960_Controller_T *Controller)
2505 {
2506   int MajorNumber = DAC960_MAJOR + Controller->ControllerNumber;
2507   int n;
2508
2509   /*
2510     Register the Block Device Major Number for this DAC960 Controller.
2511   */
2512   if (register_blkdev(MajorNumber, "dac960") < 0)
2513       return false;
2514
2515   for (n = 0; n < DAC960_MaxLogicalDrives; n++) {
2516         struct gendisk *disk = Controller->disks[n];
2517         struct request_queue *RequestQueue;
2518
2519         /* for now, let all request queues share controller's lock */
2520         RequestQueue = blk_init_queue(DAC960_RequestFunction,&Controller->queue_lock);
2521         if (!RequestQueue) {
2522                 printk("DAC960: failure to allocate request queue\n");
2523                 continue;
2524         }
2525         Controller->RequestQueue[n] = RequestQueue;
2526         blk_queue_bounce_limit(RequestQueue, Controller->BounceBufferLimit);
2527         RequestQueue->queuedata = Controller;
2528         blk_queue_max_hw_segments(RequestQueue, Controller->DriverScatterGatherLimit);
2529         blk_queue_max_phys_segments(RequestQueue, Controller->DriverScatterGatherLimit);
2530         blk_queue_max_sectors(RequestQueue, Controller->MaxBlocksPerCommand);
2531         disk->queue = RequestQueue;
2532         sprintf(disk->disk_name, "rd/c%dd%d", Controller->ControllerNumber, n);
2533         sprintf(disk->devfs_name, "rd/host%d/target%d", Controller->ControllerNumber, n);
2534         disk->major = MajorNumber;
2535         disk->first_minor = n << DAC960_MaxPartitionsBits;
2536         disk->fops = &DAC960_BlockDeviceOperations;
2537    }
2538   /*
2539     Indicate the Block Device Registration completed successfully,
2540   */
2541   return true;
2542 }
2543
2544
2545 /*
2546   DAC960_UnregisterBlockDevice unregisters the Block Device structures
2547   associated with Controller.
2548 */
2549
2550 static void DAC960_UnregisterBlockDevice(DAC960_Controller_T *Controller)
2551 {
2552   int MajorNumber = DAC960_MAJOR + Controller->ControllerNumber;
2553   int disk;
2554
2555   /* does order matter when deleting gendisk and cleanup in request queue? */
2556   for (disk = 0; disk < DAC960_MaxLogicalDrives; disk++) {
2557         del_gendisk(Controller->disks[disk]);
2558         blk_cleanup_queue(Controller->RequestQueue[disk]);
2559         Controller->RequestQueue[disk] = NULL;
2560   }
2561
2562   /*
2563     Unregister the Block Device Major Number for this DAC960 Controller.
2564   */
2565   unregister_blkdev(MajorNumber, "dac960");
2566 }
2567
2568 /*
2569   DAC960_ComputeGenericDiskInfo computes the values for the Generic Disk
2570   Information Partition Sector Counts and Block Sizes.
2571 */
2572
2573 static void DAC960_ComputeGenericDiskInfo(DAC960_Controller_T *Controller)
2574 {
2575         int disk;
2576         for (disk = 0; disk < DAC960_MaxLogicalDrives; disk++)
2577                 set_capacity(Controller->disks[disk], disk_size(Controller, disk));
2578 }
2579
2580 /*
2581   DAC960_ReportErrorStatus reports Controller BIOS Messages passed through
2582   the Error Status Register when the driver performs the BIOS handshaking.
2583   It returns true for fatal errors and false otherwise.
2584 */
2585
2586 static boolean DAC960_ReportErrorStatus(DAC960_Controller_T *Controller,
2587                                         unsigned char ErrorStatus,
2588                                         unsigned char Parameter0,
2589                                         unsigned char Parameter1)
2590 {
2591   switch (ErrorStatus)
2592     {
2593     case 0x00:
2594       DAC960_Notice("Physical Device %d:%d Not Responding\n",
2595                     Controller, Parameter1, Parameter0);
2596       break;
2597     case 0x08:
2598       if (Controller->DriveSpinUpMessageDisplayed) break;
2599       DAC960_Notice("Spinning Up Drives\n", Controller);
2600       Controller->DriveSpinUpMessageDisplayed = true;
2601       break;
2602     case 0x30:
2603       DAC960_Notice("Configuration Checksum Error\n", Controller);
2604       break;
2605     case 0x60:
2606       DAC960_Notice("Mirror Race Recovery Failed\n", Controller);
2607       break;
2608     case 0x70:
2609       DAC960_Notice("Mirror Race Recovery In Progress\n", Controller);
2610       break;
2611     case 0x90:
2612       DAC960_Notice("Physical Device %d:%d COD Mismatch\n",
2613                     Controller, Parameter1, Parameter0);
2614       break;
2615     case 0xA0:
2616       DAC960_Notice("Logical Drive Installation Aborted\n", Controller);
2617       break;
2618     case 0xB0:
2619       DAC960_Notice("Mirror Race On A Critical Logical Drive\n", Controller);
2620       break;
2621     case 0xD0:
2622       DAC960_Notice("New Controller Configuration Found\n", Controller);
2623       break;
2624     case 0xF0:
2625       DAC960_Error("Fatal Memory Parity Error for Controller at\n", Controller);
2626       return true;
2627     default:
2628       DAC960_Error("Unknown Initialization Error %02X for Controller at\n",
2629                    Controller, ErrorStatus);
2630       return true;
2631     }
2632   return false;
2633 }
2634
2635
2636 /*
2637  * DAC960_DetectCleanup releases the resources that were allocated
2638  * during DAC960_DetectController().  DAC960_DetectController can
2639  * has several internal failure points, so not ALL resources may
2640  * have been allocated.  It's important to free only
2641  * resources that HAVE been allocated.  The code below always
2642  * tests that the resource has been allocated before attempting to
2643  * free it.
2644  */
2645 static void DAC960_DetectCleanup(DAC960_Controller_T *Controller)
2646 {
2647   int i;
2648
2649   /* Free the memory mailbox, status, and related structures */
2650   free_dma_loaf(Controller->PCIDevice, &Controller->DmaPages);
2651   if (Controller->MemoryMappedAddress) {
2652         switch(Controller->HardwareType)
2653         {
2654                 case DAC960_GEM_Controller:
2655                         DAC960_GEM_DisableInterrupts(Controller->BaseAddress);
2656                         break;
2657                 case DAC960_BA_Controller:
2658                         DAC960_BA_DisableInterrupts(Controller->BaseAddress);
2659                         break;
2660                 case DAC960_LP_Controller:
2661                         DAC960_LP_DisableInterrupts(Controller->BaseAddress);
2662                         break;
2663                 case DAC960_LA_Controller:
2664                         DAC960_LA_DisableInterrupts(Controller->BaseAddress);
2665                         break;
2666                 case DAC960_PG_Controller:
2667                         DAC960_PG_DisableInterrupts(Controller->BaseAddress);
2668                         break;
2669                 case DAC960_PD_Controller:
2670                         DAC960_PD_DisableInterrupts(Controller->BaseAddress);
2671                         break;
2672                 case DAC960_P_Controller:
2673                         DAC960_PD_DisableInterrupts(Controller->BaseAddress);
2674                         break;
2675         }
2676         iounmap(Controller->MemoryMappedAddress);
2677   }
2678   if (Controller->IRQ_Channel)
2679         free_irq(Controller->IRQ_Channel, Controller);
2680   if (Controller->IO_Address)
2681         release_region(Controller->IO_Address, 0x80);
2682   pci_disable_device(Controller->PCIDevice);
2683   for (i = 0; (i < DAC960_MaxLogicalDrives) && Controller->disks[i]; i++)
2684        put_disk(Controller->disks[i]);
2685   DAC960_Controllers[Controller->ControllerNumber] = NULL;
2686   kfree(Controller);
2687 }
2688
2689
2690 /*
2691   DAC960_DetectController detects Mylex DAC960/AcceleRAID/eXtremeRAID
2692   PCI RAID Controllers by interrogating the PCI Configuration Space for
2693   Controller Type.
2694 */
2695
2696 static DAC960_Controller_T *
2697 DAC960_DetectController(struct pci_dev *PCI_Device,
2698                         const struct pci_device_id *entry)
2699 {
2700   struct DAC960_privdata *privdata =
2701                 (struct DAC960_privdata *)entry->driver_data;
2702   irqreturn_t (*InterruptHandler)(int, void *, struct pt_regs *) =
2703                 privdata->InterruptHandler;
2704   unsigned int MemoryWindowSize = privdata->MemoryWindowSize;
2705   DAC960_Controller_T *Controller = NULL;
2706   unsigned char DeviceFunction = PCI_Device->devfn;
2707   unsigned char ErrorStatus, Parameter0, Parameter1;
2708   unsigned int IRQ_Channel;
2709   void __iomem *BaseAddress;
2710   int i;
2711
2712   Controller = kzalloc(sizeof(DAC960_Controller_T), GFP_ATOMIC);
2713   if (Controller == NULL) {
2714         DAC960_Error("Unable to allocate Controller structure for "
2715                        "Controller at\n", NULL);
2716         return NULL;
2717   }
2718   Controller->ControllerNumber = DAC960_ControllerCount;
2719   DAC960_Controllers[DAC960_ControllerCount++] = Controller;
2720   Controller->Bus = PCI_Device->bus->number;
2721   Controller->FirmwareType = privdata->FirmwareType;
2722   Controller->HardwareType = privdata->HardwareType;
2723   Controller->Device = DeviceFunction >> 3;
2724   Controller->Function = DeviceFunction & 0x7;
2725   Controller->PCIDevice = PCI_Device;
2726   strcpy(Controller->FullModelName, "DAC960");
2727
2728   if (pci_enable_device(PCI_Device))
2729         goto Failure;
2730
2731   switch (Controller->HardwareType)
2732   {
2733         case DAC960_GEM_Controller:
2734           Controller->PCI_Address = pci_resource_start(PCI_Device, 0);
2735           break;
2736         case DAC960_BA_Controller:
2737           Controller->PCI_Address = pci_resource_start(PCI_Device, 0);
2738           break;
2739         case DAC960_LP_Controller:
2740           Controller->PCI_Address = pci_resource_start(PCI_Device, 0);
2741           break;
2742         case DAC960_LA_Controller:
2743           Controller->PCI_Address = pci_resource_start(PCI_Device, 0);
2744           break;
2745         case DAC960_PG_Controller:
2746           Controller->PCI_Address = pci_resource_start(PCI_Device, 0);
2747           break;
2748         case DAC960_PD_Controller:
2749           Controller->IO_Address = pci_resource_start(PCI_Device, 0);
2750           Controller->PCI_Address = pci_resource_start(PCI_Device, 1);
2751           break;
2752         case DAC960_P_Controller:
2753           Controller->IO_Address = pci_resource_start(PCI_Device, 0);
2754           Controller->PCI_Address = pci_resource_start(PCI_Device, 1);
2755           break;
2756   }
2757
2758   pci_set_drvdata(PCI_Device, (void *)((long)Controller->ControllerNumber));
2759   for (i = 0; i < DAC960_MaxLogicalDrives; i++) {
2760         Controller->disks[i] = alloc_disk(1<<DAC960_MaxPartitionsBits);
2761         if (!Controller->disks[i])
2762                 goto Failure;
2763         Controller->disks[i]->private_data = (void *)((long)i);
2764   }
2765   init_waitqueue_head(&Controller->CommandWaitQueue);
2766   init_waitqueue_head(&Controller->HealthStatusWaitQueue);
2767   spin_lock_init(&Controller->queue_lock);
2768   DAC960_AnnounceDriver(Controller);
2769   /*
2770     Map the Controller Register Window.
2771   */
2772  if (MemoryWindowSize < PAGE_SIZE)
2773         MemoryWindowSize = PAGE_SIZE;
2774   Controller->MemoryMappedAddress =
2775         ioremap_nocache(Controller->PCI_Address & PAGE_MASK, MemoryWindowSize);
2776   Controller->BaseAddress =
2777         Controller->MemoryMappedAddress + (Controller->PCI_Address & ~PAGE_MASK);
2778   if (Controller->MemoryMappedAddress == NULL)
2779   {
2780           DAC960_Error("Unable to map Controller Register Window for "
2781                        "Controller at\n", Controller);
2782           goto Failure;
2783   }
2784   BaseAddress = Controller->BaseAddress;
2785   switch (Controller->HardwareType)
2786   {
2787         case DAC960_GEM_Controller:
2788           DAC960_GEM_DisableInterrupts(BaseAddress);
2789           DAC960_GEM_AcknowledgeHardwareMailboxStatus(BaseAddress);
2790           udelay(1000);
2791           while (DAC960_GEM_InitializationInProgressP(BaseAddress))
2792             {
2793               if (DAC960_GEM_ReadErrorStatus(BaseAddress, &ErrorStatus,
2794                                             &Parameter0, &Parameter1) &&
2795                   DAC960_ReportErrorStatus(Controller, ErrorStatus,
2796                                            Parameter0, Parameter1))
2797                 goto Failure;
2798               udelay(10);
2799             }
2800           if (!DAC960_V2_EnableMemoryMailboxInterface(Controller))
2801             {
2802               DAC960_Error("Unable to Enable Memory Mailbox Interface "
2803                            "for Controller at\n", Controller);
2804               goto Failure;
2805             }
2806           DAC960_GEM_EnableInterrupts(BaseAddress);
2807           Controller->QueueCommand = DAC960_GEM_QueueCommand;
2808           Controller->ReadControllerConfiguration =
2809             DAC960_V2_ReadControllerConfiguration;
2810           Controller->ReadDeviceConfiguration =
2811             DAC960_V2_ReadDeviceConfiguration;
2812           Controller->ReportDeviceConfiguration =
2813             DAC960_V2_ReportDeviceConfiguration;
2814           Controller->QueueReadWriteCommand =
2815             DAC960_V2_QueueReadWriteCommand;
2816           break;
2817         case DAC960_BA_Controller:
2818           DAC960_BA_DisableInterrupts(BaseAddress);
2819           DAC960_BA_AcknowledgeHardwareMailboxStatus(BaseAddress);
2820           udelay(1000);
2821           while (DAC960_BA_InitializationInProgressP(BaseAddress))
2822             {
2823               if (DAC960_BA_ReadErrorStatus(BaseAddress, &ErrorStatus,
2824                                             &Parameter0, &Parameter1) &&
2825                   DAC960_ReportErrorStatus(Controller, ErrorStatus,
2826                                            Parameter0, Parameter1))
2827                 goto Failure;
2828               udelay(10);
2829             }
2830           if (!DAC960_V2_EnableMemoryMailboxInterface(Controller))
2831             {
2832               DAC960_Error("Unable to Enable Memory Mailbox Interface "
2833                            "for Controller at\n", Controller);
2834               goto Failure;
2835             }
2836           DAC960_BA_EnableInterrupts(BaseAddress);
2837           Controller->QueueCommand = DAC960_BA_QueueCommand;
2838           Controller->ReadControllerConfiguration =
2839             DAC960_V2_ReadControllerConfiguration;
2840           Controller->ReadDeviceConfiguration =
2841             DAC960_V2_ReadDeviceConfiguration;
2842           Controller->ReportDeviceConfiguration =
2843             DAC960_V2_ReportDeviceConfiguration;
2844           Controller->QueueReadWriteCommand =
2845             DAC960_V2_QueueReadWriteCommand;
2846           break;
2847         case DAC960_LP_Controller:
2848           DAC960_LP_DisableInterrupts(BaseAddress);
2849           DAC960_LP_AcknowledgeHardwareMailboxStatus(BaseAddress);
2850           udelay(1000);
2851           while (DAC960_LP_InitializationInProgressP(BaseAddress))
2852             {
2853               if (DAC960_LP_ReadErrorStatus(BaseAddress, &ErrorStatus,
2854                                             &Parameter0, &Parameter1) &&
2855                   DAC960_ReportErrorStatus(Controller, ErrorStatus,
2856                                            Parameter0, Parameter1))
2857                 goto Failure;
2858               udelay(10);
2859             }
2860           if (!DAC960_V2_EnableMemoryMailboxInterface(Controller))
2861             {
2862               DAC960_Error("Unable to Enable Memory Mailbox Interface "
2863                            "for Controller at\n", Controller);
2864               goto Failure;
2865             }
2866           DAC960_LP_EnableInterrupts(BaseAddress);
2867           Controller->QueueCommand = DAC960_LP_QueueCommand;
2868           Controller->ReadControllerConfiguration =
2869             DAC960_V2_ReadControllerConfiguration;
2870           Controller->ReadDeviceConfiguration =
2871             DAC960_V2_ReadDeviceConfiguration;
2872           Controller->ReportDeviceConfiguration =
2873             DAC960_V2_ReportDeviceConfiguration;
2874           Controller->QueueReadWriteCommand =
2875             DAC960_V2_QueueReadWriteCommand;
2876           break;
2877         case DAC960_LA_Controller:
2878           DAC960_LA_DisableInterrupts(BaseAddress);
2879           DAC960_LA_AcknowledgeHardwareMailboxStatus(BaseAddress);
2880           udelay(1000);
2881           while (DAC960_LA_InitializationInProgressP(BaseAddress))
2882             {
2883               if (DAC960_LA_ReadErrorStatus(BaseAddress, &ErrorStatus,
2884                                             &Parameter0, &Parameter1) &&
2885                   DAC960_ReportErrorStatus(Controller, ErrorStatus,
2886                                            Parameter0, Parameter1))
2887                 goto Failure;
2888               udelay(10);
2889             }
2890           if (!DAC960_V1_EnableMemoryMailboxInterface(Controller))
2891             {
2892               DAC960_Error("Unable to Enable Memory Mailbox Interface "
2893                            "for Controller at\n", Controller);
2894               goto Failure;
2895             }
2896           DAC960_LA_EnableInterrupts(BaseAddress);
2897           if (Controller->V1.DualModeMemoryMailboxInterface)
2898             Controller->QueueCommand = DAC960_LA_QueueCommandDualMode;
2899           else Controller->QueueCommand = DAC960_LA_QueueCommandSingleMode;
2900           Controller->ReadControllerConfiguration =
2901             DAC960_V1_ReadControllerConfiguration;
2902           Controller->ReadDeviceConfiguration =
2903             DAC960_V1_ReadDeviceConfiguration;
2904           Controller->ReportDeviceConfiguration =
2905             DAC960_V1_ReportDeviceConfiguration;
2906           Controller->QueueReadWriteCommand =
2907             DAC960_V1_QueueReadWriteCommand;
2908           break;
2909         case DAC960_PG_Controller:
2910           DAC960_PG_DisableInterrupts(BaseAddress);
2911           DAC960_PG_AcknowledgeHardwareMailboxStatus(BaseAddress);
2912           udelay(1000);
2913           while (DAC960_PG_InitializationInProgressP(BaseAddress))
2914             {
2915               if (DAC960_PG_ReadErrorStatus(BaseAddress, &ErrorStatus,
2916                                             &Parameter0, &Parameter1) &&
2917                   DAC960_ReportErrorStatus(Controller, ErrorStatus,
2918                                            Parameter0, Parameter1))
2919                 goto Failure;
2920               udelay(10);
2921             }
2922           if (!DAC960_V1_EnableMemoryMailboxInterface(Controller))
2923             {
2924               DAC960_Error("Unable to Enable Memory Mailbox Interface "
2925                            "for Controller at\n", Controller);
2926               goto Failure;
2927             }
2928           DAC960_PG_EnableInterrupts(BaseAddress);
2929           if (Controller->V1.DualModeMemoryMailboxInterface)
2930             Controller->QueueCommand = DAC960_PG_QueueCommandDualMode;
2931           else Controller->QueueCommand = DAC960_PG_QueueCommandSingleMode;
2932           Controller->ReadControllerConfiguration =
2933             DAC960_V1_ReadControllerConfiguration;
2934           Controller->ReadDeviceConfiguration =
2935             DAC960_V1_ReadDeviceConfiguration;
2936           Controller->ReportDeviceConfiguration =
2937             DAC960_V1_ReportDeviceConfiguration;
2938           Controller->QueueReadWriteCommand =
2939             DAC960_V1_QueueReadWriteCommand;
2940           break;
2941         case DAC960_PD_Controller:
2942           if (!request_region(Controller->IO_Address, 0x80,
2943                               Controller->FullModelName)) {
2944                 DAC960_Error("IO port 0x%d busy for Controller at\n",
2945                              Controller, Controller->IO_Address);
2946                 goto Failure;
2947           }
2948           DAC960_PD_DisableInterrupts(BaseAddress);
2949           DAC960_PD_AcknowledgeStatus(BaseAddress);
2950           udelay(1000);
2951           while (DAC960_PD_InitializationInProgressP(BaseAddress))
2952             {
2953               if (DAC960_PD_ReadErrorStatus(BaseAddress, &ErrorStatus,
2954                                             &Parameter0, &Parameter1) &&
2955                   DAC960_ReportErrorStatus(Controller, ErrorStatus,
2956                                            Parameter0, Parameter1))
2957                 goto Failure;
2958               udelay(10);
2959             }
2960           if (!DAC960_V1_EnableMemoryMailboxInterface(Controller))
2961             {
2962               DAC960_Error("Unable to allocate DMA mapped memory "
2963                            "for Controller at\n", Controller);
2964               goto Failure;
2965             }
2966           DAC960_PD_EnableInterrupts(BaseAddress);
2967           Controller->QueueCommand = DAC960_PD_QueueCommand;
2968           Controller->ReadControllerConfiguration =
2969             DAC960_V1_ReadControllerConfiguration;
2970           Controller->ReadDeviceConfiguration =
2971             DAC960_V1_ReadDeviceConfiguration;
2972           Controller->ReportDeviceConfiguration =
2973             DAC960_V1_ReportDeviceConfiguration;
2974           Controller->QueueReadWriteCommand =
2975             DAC960_V1_QueueReadWriteCommand;
2976           break;
2977         case DAC960_P_Controller:
2978           if (!request_region(Controller->IO_Address, 0x80,
2979                               Controller->FullModelName)){
2980                 DAC960_Error("IO port 0x%d busy for Controller at\n",
2981                              Controller, Controller->IO_Address);
2982                 goto Failure;
2983           }
2984           DAC960_PD_DisableInterrupts(BaseAddress);
2985           DAC960_PD_AcknowledgeStatus(BaseAddress);
2986           udelay(1000);
2987           while (DAC960_PD_InitializationInProgressP(BaseAddress))
2988             {
2989               if (DAC960_PD_ReadErrorStatus(BaseAddress, &ErrorStatus,
2990                                             &Parameter0, &Parameter1) &&
2991                   DAC960_ReportErrorStatus(Controller, ErrorStatus,
2992                                            Parameter0, Parameter1))
2993                 goto Failure;
2994               udelay(10);
2995             }
2996           if (!DAC960_V1_EnableMemoryMailboxInterface(Controller))
2997             {
2998               DAC960_Error("Unable to allocate DMA mapped memory"
2999                            "for Controller at\n", Controller);
3000               goto Failure;
3001             }
3002           DAC960_PD_EnableInterrupts(BaseAddress);
3003           Controller->QueueCommand = DAC960_P_QueueCommand;
3004           Controller->ReadControllerConfiguration =
3005             DAC960_V1_ReadControllerConfiguration;
3006           Controller->ReadDeviceConfiguration =
3007             DAC960_V1_ReadDeviceConfiguration;
3008           Controller->ReportDeviceConfiguration =
3009             DAC960_V1_ReportDeviceConfiguration;
3010           Controller->QueueReadWriteCommand =
3011             DAC960_V1_QueueReadWriteCommand;
3012           break;
3013   }
3014   /*
3015      Acquire shared access to the IRQ Channel.
3016   */
3017   IRQ_Channel = PCI_Device->irq;
3018   if (request_irq(IRQ_Channel, InterruptHandler, SA_SHIRQ,
3019                       Controller->FullModelName, Controller) < 0)
3020   {
3021         DAC960_Error("Unable to acquire IRQ Channel %d for Controller at\n",
3022                        Controller, Controller->IRQ_Channel);
3023         goto Failure;
3024   }
3025   Controller->IRQ_Channel = IRQ_Channel;
3026   Controller->InitialCommand.CommandIdentifier = 1;
3027   Controller->InitialCommand.Controller = Controller;
3028   Controller->Commands[0] = &Controller->InitialCommand;
3029   Controller->FreeCommands = &Controller->InitialCommand;
3030   return Controller;
3031
3032 Failure:
3033   if (Controller->IO_Address == 0)
3034         DAC960_Error("PCI Bus %d Device %d Function %d I/O Address N/A "
3035                      "PCI Address 0x%X\n", Controller,
3036                      Controller->Bus, Controller->Device,
3037                      Controller->Function, Controller->PCI_Address);
3038   else
3039         DAC960_Error("PCI Bus %d Device %d Function %d I/O Address "
3040                         "0x%X PCI Address 0x%X\n", Controller,
3041                         Controller->Bus, Controller->Device,
3042                         Controller->Function, Controller->IO_Address,
3043                         Controller->PCI_Address);
3044   DAC960_DetectCleanup(Controller);
3045   DAC960_ControllerCount--;
3046   return NULL;
3047 }
3048
3049 /*
3050   DAC960_InitializeController initializes Controller.
3051 */
3052
3053 static boolean
3054 DAC960_InitializeController(DAC960_Controller_T *Controller)
3055 {
3056   if (DAC960_ReadControllerConfiguration(Controller) &&
3057       DAC960_ReportControllerConfiguration(Controller) &&
3058       DAC960_CreateAuxiliaryStructures(Controller) &&
3059       DAC960_ReadDeviceConfiguration(Controller) &&
3060       DAC960_ReportDeviceConfiguration(Controller) &&
3061       DAC960_RegisterBlockDevice(Controller))
3062     {
3063       /*
3064         Initialize the Monitoring Timer.
3065       */
3066       init_timer(&Controller->MonitoringTimer);
3067       Controller->MonitoringTimer.expires =
3068         jiffies + DAC960_MonitoringTimerInterval;
3069       Controller->MonitoringTimer.data = (unsigned long) Controller;
3070       Controller->MonitoringTimer.function = DAC960_MonitoringTimerFunction;
3071       add_timer(&Controller->MonitoringTimer);
3072       Controller->ControllerInitialized = true;
3073       return true;
3074     }
3075   return false;
3076 }
3077
3078
3079 /*
3080   DAC960_FinalizeController finalizes Controller.
3081 */
3082
3083 static void DAC960_FinalizeController(DAC960_Controller_T *Controller)
3084 {
3085   if (Controller->ControllerInitialized)
3086     {
3087       unsigned long flags;
3088
3089       /*
3090        * Acquiring and releasing lock here eliminates
3091        * a very low probability race.
3092        *
3093        * The code below allocates controller command structures
3094        * from the free list without holding the controller lock.
3095        * This is safe assuming there is no other activity on
3096        * the controller at the time.
3097        *
3098        * But, there might be a monitoring command still
3099        * in progress.  Setting the Shutdown flag while holding
3100        * the lock ensures that there is no monitoring command
3101        * in the interrupt handler currently, and any monitoring
3102        * commands that complete from this time on will NOT return
3103        * their command structure to the free list.
3104        */
3105
3106       spin_lock_irqsave(&Controller->queue_lock, flags);
3107       Controller->ShutdownMonitoringTimer = 1;
3108       spin_unlock_irqrestore(&Controller->queue_lock, flags);
3109
3110       del_timer_sync(&Controller->MonitoringTimer);
3111       if (Controller->FirmwareType == DAC960_V1_Controller)
3112         {
3113           DAC960_Notice("Flushing Cache...", Controller);
3114           DAC960_V1_ExecuteType3(Controller, DAC960_V1_Flush, 0);
3115           DAC960_Notice("done\n", Controller);
3116
3117           if (Controller->HardwareType == DAC960_PD_Controller)
3118               release_region(Controller->IO_Address, 0x80);
3119         }
3120       else
3121         {
3122           DAC960_Notice("Flushing Cache...", Controller);
3123           DAC960_V2_DeviceOperation(Controller, DAC960_V2_PauseDevice,
3124                                     DAC960_V2_RAID_Controller);
3125           DAC960_Notice("done\n", Controller);
3126         }
3127     }
3128   DAC960_UnregisterBlockDevice(Controller);
3129   DAC960_DestroyAuxiliaryStructures(Controller);
3130   DAC960_DestroyProcEntries(Controller);
3131   DAC960_DetectCleanup(Controller);
3132 }
3133
3134
3135 /*
3136   DAC960_Probe verifies controller's existence and
3137   initializes the DAC960 Driver for that controller.
3138 */
3139
3140 static int
3141 DAC960_Probe(struct pci_dev *dev, const struct pci_device_id *entry)
3142 {
3143   int disk;
3144   DAC960_Controller_T *Controller;
3145
3146   if (DAC960_ControllerCount == DAC960_MaxControllers)
3147   {
3148         DAC960_Error("More than %d DAC960 Controllers detected - "
3149                        "ignoring from Controller at\n",
3150                        NULL, DAC960_MaxControllers);
3151         return -ENODEV;
3152   }
3153
3154   Controller = DAC960_DetectController(dev, entry);
3155   if (!Controller)
3156         return -ENODEV;
3157
3158   if (!DAC960_InitializeController(Controller)) {
3159         DAC960_FinalizeController(Controller);
3160         return -ENODEV;
3161   }
3162
3163   for (disk = 0; disk < DAC960_MaxLogicalDrives; disk++) {
3164         set_capacity(Controller->disks[disk], disk_size(Controller, disk));
3165         add_disk(Controller->disks[disk]);
3166   }
3167   DAC960_CreateProcEntries(Controller);
3168   return 0;
3169 }
3170
3171
3172 /*
3173   DAC960_Finalize finalizes the DAC960 Driver.
3174 */
3175
3176 static void DAC960_Remove(struct pci_dev *PCI_Device)
3177 {
3178   int Controller_Number = (long)pci_get_drvdata(PCI_Device);
3179   DAC960_Controller_T *Controller = DAC960_Controllers[Controller_Number];
3180   if (Controller != NULL)
3181       DAC960_FinalizeController(Controller);
3182 }
3183
3184
3185 /*
3186   DAC960_V1_QueueReadWriteCommand prepares and queues a Read/Write Command for
3187   DAC960 V1 Firmware Controllers.
3188 */
3189
3190 static void DAC960_V1_QueueReadWriteCommand(DAC960_Command_T *Command)
3191 {
3192   DAC960_Controller_T *Controller = Command->Controller;
3193   DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
3194   DAC960_V1_ScatterGatherSegment_T *ScatterGatherList =
3195                                         Command->V1.ScatterGatherList;
3196   struct scatterlist *ScatterList = Command->V1.ScatterList;
3197
3198   DAC960_V1_ClearCommand(Command);
3199
3200   if (Command->SegmentCount == 1)
3201     {
3202       if (Command->DmaDirection == PCI_DMA_FROMDEVICE)
3203         CommandMailbox->Type5.CommandOpcode = DAC960_V1_Read;
3204       else
3205         CommandMailbox->Type5.CommandOpcode = DAC960_V1_Write;
3206
3207       CommandMailbox->Type5.LD.TransferLength = Command->BlockCount;
3208       CommandMailbox->Type5.LD.LogicalDriveNumber = Command->LogicalDriveNumber;
3209       CommandMailbox->Type5.LogicalBlockAddress = Command->BlockNumber;
3210       CommandMailbox->Type5.BusAddress =
3211                         (DAC960_BusAddress32_T)sg_dma_address(ScatterList);
3212     }
3213   else
3214     {
3215       int i;
3216
3217       if (Command->DmaDirection == PCI_DMA_FROMDEVICE)
3218         CommandMailbox->Type5.CommandOpcode = DAC960_V1_ReadWithScatterGather;
3219       else
3220         CommandMailbox->Type5.CommandOpcode = DAC960_V1_WriteWithScatterGather;
3221
3222       CommandMailbox->Type5.LD.TransferLength = Command->BlockCount;
3223       CommandMailbox->Type5.LD.LogicalDriveNumber = Command->LogicalDriveNumber;
3224       CommandMailbox->Type5.LogicalBlockAddress = Command->BlockNumber;
3225       CommandMailbox->Type5.BusAddress = Command->V1.ScatterGatherListDMA;
3226
3227       CommandMailbox->Type5.ScatterGatherCount = Command->SegmentCount;
3228
3229       for (i = 0; i < Command->SegmentCount; i++, ScatterList++, ScatterGatherList++) {
3230                 ScatterGatherList->SegmentDataPointer =
3231                         (DAC960_BusAddress32_T)sg_dma_address(ScatterList);
3232                 ScatterGatherList->SegmentByteCount =
3233                         (DAC960_ByteCount32_T)sg_dma_len(ScatterList);
3234       }
3235     }
3236   DAC960_QueueCommand(Command);
3237 }
3238
3239
3240 /*
3241   DAC960_V2_QueueReadWriteCommand prepares and queues a Read/Write Command for
3242   DAC960 V2 Firmware Controllers.
3243 */
3244
3245 static void DAC960_V2_QueueReadWriteCommand(DAC960_Command_T *Command)
3246 {
3247   DAC960_Controller_T *Controller = Command->Controller;
3248   DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
3249   struct scatterlist *ScatterList = Command->V2.ScatterList;
3250
3251   DAC960_V2_ClearCommand(Command);
3252
3253   CommandMailbox->SCSI_10.CommandOpcode = DAC960_V2_SCSI_10;
3254   CommandMailbox->SCSI_10.CommandControlBits.DataTransferControllerToHost =
3255     (Command->DmaDirection == PCI_DMA_FROMDEVICE);
3256   CommandMailbox->SCSI_10.DataTransferSize =
3257     Command->BlockCount << DAC960_BlockSizeBits;
3258   CommandMailbox->SCSI_10.RequestSenseBusAddress = Command->V2.RequestSenseDMA;
3259   CommandMailbox->SCSI_10.PhysicalDevice =
3260     Controller->V2.LogicalDriveToVirtualDevice[Command->LogicalDriveNumber];
3261   CommandMailbox->SCSI_10.RequestSenseSize = sizeof(DAC960_SCSI_RequestSense_T);
3262   CommandMailbox->SCSI_10.CDBLength = 10;
3263   CommandMailbox->SCSI_10.SCSI_CDB[0] =
3264     (Command->DmaDirection == PCI_DMA_FROMDEVICE ? 0x28 : 0x2A);
3265   CommandMailbox->SCSI_10.SCSI_CDB[2] = Command->BlockNumber >> 24;
3266   CommandMailbox->SCSI_10.SCSI_CDB[3] = Command->BlockNumber >> 16;
3267   CommandMailbox->SCSI_10.SCSI_CDB[4] = Command->BlockNumber >> 8;
3268   CommandMailbox->SCSI_10.SCSI_CDB[5] = Command->BlockNumber;
3269   CommandMailbox->SCSI_10.SCSI_CDB[7] = Command->BlockCount >> 8;
3270   CommandMailbox->SCSI_10.SCSI_CDB[8] = Command->BlockCount;
3271
3272   if (Command->SegmentCount == 1)
3273     {
3274       CommandMailbox->SCSI_10.DataTransferMemoryAddress
3275                              .ScatterGatherSegments[0]
3276                              .SegmentDataPointer =
3277         (DAC960_BusAddress64_T)sg_dma_address(ScatterList);
3278       CommandMailbox->SCSI_10.DataTransferMemoryAddress
3279                              .ScatterGatherSegments[0]
3280                              .SegmentByteCount =
3281         CommandMailbox->SCSI_10.DataTransferSize;
3282     }
3283   else
3284     {
3285       DAC960_V2_ScatterGatherSegment_T *ScatterGatherList;
3286       int i;
3287
3288       if (Command->SegmentCount > 2)
3289         {
3290           ScatterGatherList = Command->V2.ScatterGatherList;
3291           CommandMailbox->SCSI_10.CommandControlBits
3292                          .AdditionalScatterGatherListMemory = true;
3293           CommandMailbox->SCSI_10.DataTransferMemoryAddress
3294                 .ExtendedScatterGather.ScatterGatherList0Length = Command->SegmentCount;
3295           CommandMailbox->SCSI_10.DataTransferMemoryAddress
3296                          .ExtendedScatterGather.ScatterGatherList0Address =
3297             Command->V2.ScatterGatherListDMA;
3298         }
3299       else
3300         ScatterGatherList = CommandMailbox->SCSI_10.DataTransferMemoryAddress
3301                                  .ScatterGatherSegments;
3302
3303       for (i = 0; i < Command->SegmentCount; i++, ScatterList++, ScatterGatherList++) {
3304                 ScatterGatherList->SegmentDataPointer =
3305                         (DAC960_BusAddress64_T)sg_dma_address(ScatterList);
3306                 ScatterGatherList->SegmentByteCount =
3307                         (DAC960_ByteCount64_T)sg_dma_len(ScatterList);
3308       }
3309     }
3310   DAC960_QueueCommand(Command);
3311 }
3312
3313
3314 static int DAC960_process_queue(DAC960_Controller_T *Controller, struct request_queue *req_q)
3315 {
3316         struct request *Request;
3317         DAC960_Command_T *Command;
3318
3319    while(1) {
3320         Request = elv_next_request(req_q);
3321         if (!Request)
3322                 return 1;
3323
3324         Command = DAC960_AllocateCommand(Controller);
3325         if (Command == NULL)
3326                 return 0;
3327
3328         if (rq_data_dir(Request) == READ) {
3329                 Command->DmaDirection = PCI_DMA_FROMDEVICE;
3330                 Command->CommandType = DAC960_ReadCommand;
3331         } else {
3332                 Command->DmaDirection = PCI_DMA_TODEVICE;
3333                 Command->CommandType = DAC960_WriteCommand;
3334         }
3335         Command->Completion = Request->waiting;
3336         Command->LogicalDriveNumber = (long)Request->rq_disk->private_data;
3337         Command->BlockNumber = Request->sector;
3338         Command->BlockCount = Request->nr_sectors;
3339         Command->Request = Request;
3340         blkdev_dequeue_request(Request);
3341         Command->SegmentCount = blk_rq_map_sg(req_q,
3342                   Command->Request, Command->cmd_sglist);
3343         /* pci_map_sg MAY change the value of SegCount */
3344         Command->SegmentCount = pci_map_sg(Controller->PCIDevice, Command->cmd_sglist,
3345                  Command->SegmentCount, Command->DmaDirection);
3346
3347         DAC960_QueueReadWriteCommand(Command);
3348   }
3349 }
3350
3351 /*
3352   DAC960_ProcessRequest attempts to remove one I/O Request from Controller's
3353   I/O Request Queue and queues it to the Controller.  WaitForCommand is true if
3354   this function should wait for a Command to become available if necessary.
3355   This function returns true if an I/O Request was queued and false otherwise.
3356 */
3357 static void DAC960_ProcessRequest(DAC960_Controller_T *controller)
3358 {
3359         int i;
3360
3361         if (!controller->ControllerInitialized)
3362                 return;
3363
3364         /* Do this better later! */
3365         for (i = controller->req_q_index; i < DAC960_MaxLogicalDrives; i++) {
3366                 struct request_queue *req_q = controller->RequestQueue[i];
3367
3368                 if (req_q == NULL)
3369                         continue;
3370
3371                 if (!DAC960_process_queue(controller, req_q)) {
3372                         controller->req_q_index = i;
3373                         return;
3374                 }
3375         }
3376
3377         if (controller->req_q_index == 0)
3378                 return;
3379
3380         for (i = 0; i < controller->req_q_index; i++) {
3381                 struct request_queue *req_q = controller->RequestQueue[i];
3382
3383                 if (req_q == NULL)
3384                         continue;
3385
3386                 if (!DAC960_process_queue(controller, req_q)) {
3387                         controller->req_q_index = i;
3388                         return;
3389                 }
3390         }
3391 }
3392
3393
3394 /*
3395   DAC960_queue_partial_rw extracts one bio from the request already
3396   associated with argument command, and construct a new command block to retry I/O
3397   only on that bio.  Queue that command to the controller.
3398
3399   This function re-uses a previously-allocated Command,
3400         there is no failure mode from trying to allocate a command.
3401 */
3402
3403 static void DAC960_queue_partial_rw(DAC960_Command_T *Command)
3404 {
3405   DAC960_Controller_T *Controller = Command->Controller;
3406   struct request *Request = Command->Request;
3407   struct request_queue *req_q = Controller->RequestQueue[Command->LogicalDriveNumber];
3408
3409   if (Command->DmaDirection == PCI_DMA_FROMDEVICE)
3410     Command->CommandType = DAC960_ReadRetryCommand;
3411   else
3412     Command->CommandType = DAC960_WriteRetryCommand;
3413
3414   /*
3415    * We could be more efficient with these mapping requests
3416    * and map only the portions that we need.  But since this
3417    * code should almost never be called, just go with a
3418    * simple coding.
3419    */
3420   (void)blk_rq_map_sg(req_q, Command->Request, Command->cmd_sglist);
3421
3422   (void)pci_map_sg(Controller->PCIDevice, Command->cmd_sglist, 1, Command->DmaDirection);
3423   /*
3424    * Resubmitting the request sector at a time is really tedious.
3425    * But, this should almost never happen.  So, we're willing to pay
3426    * this price so that in the end, as much of the transfer is completed
3427    * successfully as possible.
3428    */
3429   Command->SegmentCount = 1;
3430   Command->BlockNumber = Request->sector;
3431   Command->BlockCount = 1;
3432   DAC960_QueueReadWriteCommand(Command);
3433   return;
3434 }
3435
3436 /*
3437   DAC960_RequestFunction is the I/O Request Function for DAC960 Controllers.
3438 */
3439
3440 static void DAC960_RequestFunction(struct request_queue *RequestQueue)
3441 {
3442         DAC960_ProcessRequest(RequestQueue->queuedata);
3443 }
3444
3445 /*
3446   DAC960_ProcessCompletedBuffer performs completion processing for an
3447   individual Buffer.
3448 */
3449
3450 static inline boolean DAC960_ProcessCompletedRequest(DAC960_Command_T *Command,
3451                                                  boolean SuccessfulIO)
3452 {
3453         struct request *Request = Command->Request;
3454         int UpToDate;
3455
3456         UpToDate = 0;
3457         if (SuccessfulIO)
3458                 UpToDate = 1;
3459
3460         pci_unmap_sg(Command->Controller->PCIDevice, Command->cmd_sglist,
3461                 Command->SegmentCount, Command->DmaDirection);
3462
3463          if (!end_that_request_first(Request, UpToDate, Command->BlockCount)) {
3464                 add_disk_randomness(Request->rq_disk);
3465                 end_that_request_last(Request, UpToDate);
3466
3467                 if (Command->Completion) {
3468                         complete(Command->Completion);
3469                         Command->Completion = NULL;
3470                 }
3471                 return true;
3472         }
3473         return false;
3474 }
3475
3476 /*
3477   DAC960_V1_ReadWriteError prints an appropriate error message for Command
3478   when an error occurs on a Read or Write operation.
3479 */
3480
3481 static void DAC960_V1_ReadWriteError(DAC960_Command_T *Command)
3482 {
3483   DAC960_Controller_T *Controller = Command->Controller;
3484   unsigned char *CommandName = "UNKNOWN";
3485   switch (Command->CommandType)
3486     {
3487     case DAC960_ReadCommand:
3488     case DAC960_ReadRetryCommand:
3489       CommandName = "READ";
3490       break;
3491     case DAC960_WriteCommand:
3492     case DAC960_WriteRetryCommand:
3493       CommandName = "WRITE";
3494       break;
3495     case DAC960_MonitoringCommand:
3496     case DAC960_ImmediateCommand:
3497     case DAC960_QueuedCommand:
3498       break;
3499     }
3500   switch (Command->V1.CommandStatus)
3501     {
3502     case DAC960_V1_IrrecoverableDataError:
3503       DAC960_Error("Irrecoverable Data Error on %s:\n",
3504                    Controller, CommandName);
3505       break;
3506     case DAC960_V1_LogicalDriveNonexistentOrOffline:
3507       DAC960_Error("Logical Drive Nonexistent or Offline on %s:\n",
3508                    Controller, CommandName);
3509       break;
3510     case DAC960_V1_AccessBeyondEndOfLogicalDrive:
3511       DAC960_Error("Attempt to Access Beyond End of Logical Drive "
3512                    "on %s:\n", Controller, CommandName);
3513       break;
3514     case DAC960_V1_BadDataEncountered:
3515       DAC960_Error("Bad Data Encountered on %s:\n", Controller, CommandName);
3516       break;
3517     default:
3518       DAC960_Error("Unexpected Error Status %04X on %s:\n",
3519                    Controller, Command->V1.CommandStatus, CommandName);
3520       break;
3521     }
3522   DAC960_Error("  /dev/rd/c%dd%d:   absolute blocks %u..%u\n",
3523                Controller, Controller->ControllerNumber,
3524                Command->LogicalDriveNumber, Command->BlockNumber,
3525                Command->BlockNumber + Command->BlockCount - 1);
3526 }
3527
3528
3529 /*
3530   DAC960_V1_ProcessCompletedCommand performs completion processing for Command
3531   for DAC960 V1 Firmware Controllers.
3532 */
3533
3534 static void DAC960_V1_ProcessCompletedCommand(DAC960_Command_T *Command)
3535 {
3536   DAC960_Controller_T *Controller = Command->Controller;
3537   DAC960_CommandType_T CommandType = Command->CommandType;
3538   DAC960_V1_CommandOpcode_T CommandOpcode =
3539     Command->V1.CommandMailbox.Common.CommandOpcode;
3540   DAC960_V1_CommandStatus_T CommandStatus = Command->V1.CommandStatus;
3541
3542   if (CommandType == DAC960_ReadCommand ||
3543       CommandType == DAC960_WriteCommand)
3544     {
3545
3546 #ifdef FORCE_RETRY_DEBUG
3547       CommandStatus = DAC960_V1_IrrecoverableDataError;
3548 #endif
3549
3550       if (CommandStatus == DAC960_V1_NormalCompletion) {
3551
3552                 if (!DAC960_ProcessCompletedRequest(Command, true))
3553                         BUG();
3554
3555       } else if (CommandStatus == DAC960_V1_IrrecoverableDataError ||
3556                 CommandStatus == DAC960_V1_BadDataEncountered)
3557         {
3558           /*
3559            * break the command down into pieces and resubmit each
3560            * piece, hoping that some of them will succeed.
3561            */
3562            DAC960_queue_partial_rw(Command);
3563            return;
3564         }
3565       else
3566         {
3567           if (CommandStatus != DAC960_V1_LogicalDriveNonexistentOrOffline)
3568             DAC960_V1_ReadWriteError(Command);
3569
3570          if (!DAC960_ProcessCompletedRequest(Command, false))
3571                 BUG();
3572         }
3573     }
3574   else if (CommandType == DAC960_ReadRetryCommand ||
3575            CommandType == DAC960_WriteRetryCommand)
3576     {
3577       boolean normal_completion;
3578 #ifdef FORCE_RETRY_FAILURE_DEBUG
3579       static int retry_count = 1;
3580 #endif
3581       /*
3582         Perform completion processing for the portion that was
3583         retried, and submit the next portion, if any.
3584       */
3585       normal_completion = true;
3586       if (CommandStatus != DAC960_V1_NormalCompletion) {
3587         normal_completion = false;
3588         if (CommandStatus != DAC960_V1_LogicalDriveNonexistentOrOffline)
3589             DAC960_V1_ReadWriteError(Command);
3590       }
3591
3592 #ifdef FORCE_RETRY_FAILURE_DEBUG
3593       if (!(++retry_count % 10000)) {
3594               printk("V1 error retry failure test\n");
3595               normal_completion = false;
3596               DAC960_V1_ReadWriteError(Command);
3597       }
3598 #endif
3599
3600       if (!DAC960_ProcessCompletedRequest(Command, normal_completion)) {
3601         DAC960_queue_partial_rw(Command);
3602         return;
3603       }
3604     }
3605
3606   else if (CommandType == DAC960_MonitoringCommand)
3607     {
3608       if (Controller->ShutdownMonitoringTimer)
3609               return;
3610       if (CommandOpcode == DAC960_V1_Enquiry)
3611         {
3612           DAC960_V1_Enquiry_T *OldEnquiry = &Controller->V1.Enquiry;
3613           DAC960_V1_Enquiry_T *NewEnquiry = Controller->V1.NewEnquiry;
3614           unsigned int OldCriticalLogicalDriveCount =
3615             OldEnquiry->CriticalLogicalDriveCount;
3616           unsigned int NewCriticalLogicalDriveCount =
3617             NewEnquiry->CriticalLogicalDriveCount;
3618           if (NewEnquiry->NumberOfLogicalDrives > Controller->LogicalDriveCount)
3619             {
3620               int LogicalDriveNumber = Controller->LogicalDriveCount - 1;
3621               while (++LogicalDriveNumber < NewEnquiry->NumberOfLogicalDrives)
3622                 DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) "
3623                                 "Now Exists\n", Controller,
3624                                 LogicalDriveNumber,
3625                                 Controller->ControllerNumber,
3626                                 LogicalDriveNumber);
3627               Controller->LogicalDriveCount = NewEnquiry->NumberOfLogicalDrives;
3628               DAC960_ComputeGenericDiskInfo(Controller);
3629             }
3630           if (NewEnquiry->NumberOfLogicalDrives < Controller->LogicalDriveCount)
3631             {
3632               int LogicalDriveNumber = NewEnquiry->NumberOfLogicalDrives - 1;
3633               while (++LogicalDriveNumber < Controller->LogicalDriveCount)
3634                 DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) "
3635                                 "No Longer Exists\n", Controller,
3636                                 LogicalDriveNumber,
3637                                 Controller->ControllerNumber,
3638                                 LogicalDriveNumber);
3639               Controller->LogicalDriveCount = NewEnquiry->NumberOfLogicalDrives;
3640               DAC960_ComputeGenericDiskInfo(Controller);
3641             }
3642           if (NewEnquiry->StatusFlags.DeferredWriteError !=
3643               OldEnquiry->StatusFlags.DeferredWriteError)
3644             DAC960_Critical("Deferred Write Error Flag is now %s\n", Controller,
3645                             (NewEnquiry->StatusFlags.DeferredWriteError
3646                              ? "TRUE" : "FALSE"));
3647           if ((NewCriticalLogicalDriveCount > 0 ||
3648                NewCriticalLogicalDriveCount != OldCriticalLogicalDriveCount) ||
3649               (NewEnquiry->OfflineLogicalDriveCount > 0 ||
3650                NewEnquiry->OfflineLogicalDriveCount !=
3651                OldEnquiry->OfflineLogicalDriveCount) ||
3652               (NewEnquiry->DeadDriveCount > 0 ||
3653                NewEnquiry->DeadDriveCount !=
3654                OldEnquiry->DeadDriveCount) ||
3655               (NewEnquiry->EventLogSequenceNumber !=
3656                OldEnquiry->EventLogSequenceNumber) ||
3657               Controller->MonitoringTimerCount == 0 ||
3658               time_after_eq(jiffies, Controller->SecondaryMonitoringTime
3659                + DAC960_SecondaryMonitoringInterval))
3660             {
3661               Controller->V1.NeedLogicalDriveInformation = true;
3662               Controller->V1.NewEventLogSequenceNumber =
3663                 NewEnquiry->EventLogSequenceNumber;
3664               Controller->V1.NeedErrorTableInformation = true;
3665               Controller->V1.NeedDeviceStateInformation = true;
3666               Controller->V1.StartDeviceStateScan = true;
3667               Controller->V1.NeedBackgroundInitializationStatus =
3668                 Controller->V1.BackgroundInitializationStatusSupported;
3669               Controller->SecondaryMonitoringTime = jiffies;
3670             }
3671           if (NewEnquiry->RebuildFlag == DAC960_V1_StandbyRebuildInProgress ||
3672               NewEnquiry->RebuildFlag
3673               == DAC960_V1_BackgroundRebuildInProgress ||
3674               OldEnquiry->RebuildFlag == DAC960_V1_StandbyRebuildInProgress ||
3675               OldEnquiry->RebuildFlag == DAC960_V1_BackgroundRebuildInProgress)
3676             {
3677               Controller->V1.NeedRebuildProgress = true;
3678               Controller->V1.RebuildProgressFirst =
3679                 (NewEnquiry->CriticalLogicalDriveCount <
3680                  OldEnquiry->CriticalLogicalDriveCount);
3681             }
3682           if (OldEnquiry->RebuildFlag == DAC960_V1_BackgroundCheckInProgress)
3683             switch (NewEnquiry->RebuildFlag)
3684               {
3685               case DAC960_V1_NoStandbyRebuildOrCheckInProgress:
3686                 DAC960_Progress("Consistency Check Completed Successfully\n",
3687                                 Controller);
3688                 break;
3689               case DAC960_V1_StandbyRebuildInProgress:
3690               case DAC960_V1_BackgroundRebuildInProgress:
3691                 break;
3692               case DAC960_V1_BackgroundCheckInProgress:
3693                 Controller->V1.NeedConsistencyCheckProgress = true;
3694                 break;
3695               case DAC960_V1_StandbyRebuildCompletedWithError:
3696                 DAC960_Progress("Consistency Check Completed with Error\n",
3697                                 Controller);
3698                 break;
3699               case DAC960_V1_BackgroundRebuildOrCheckFailed_DriveFailed:
3700                 DAC960_Progress("Consistency Check Failed - "
3701                                 "Physical Device Failed\n", Controller);
3702                 break;
3703               case DAC960_V1_BackgroundRebuildOrCheckFailed_LogicalDriveFailed:
3704                 DAC960_Progress("Consistency Check Failed - "
3705                                 "Logical Drive Failed\n", Controller);
3706                 break;
3707               case DAC960_V1_BackgroundRebuildOrCheckFailed_OtherCauses:
3708                 DAC960_Progress("Consistency Check Failed - Other Causes\n",
3709                                 Controller);
3710                 break;
3711               case DAC960_V1_BackgroundRebuildOrCheckSuccessfullyTerminated:
3712                 DAC960_Progress("Consistency Check Successfully Terminated\n",
3713                                 Controller);
3714                 break;
3715               }
3716           else if (NewEnquiry->RebuildFlag
3717                    == DAC960_V1_BackgroundCheckInProgress)
3718             Controller->V1.NeedConsistencyCheckProgress = true;
3719           Controller->MonitoringAlertMode =
3720             (NewEnquiry->CriticalLogicalDriveCount > 0 ||
3721              NewEnquiry->OfflineLogicalDriveCount > 0 ||
3722              NewEnquiry->DeadDriveCount > 0);
3723           if (NewEnquiry->RebuildFlag > DAC960_V1_BackgroundCheckInProgress)
3724             {
3725               Controller->V1.PendingRebuildFlag = NewEnquiry->RebuildFlag;
3726               Controller->V1.RebuildFlagPending = true;
3727             }
3728           memcpy(&Controller->V1.Enquiry, &Controller->V1.NewEnquiry,
3729                  sizeof(DAC960_V1_Enquiry_T));
3730         }
3731       else if (CommandOpcode == DAC960_V1_PerformEventLogOperation)
3732         {
3733           static char
3734             *DAC960_EventMessages[] =
3735                { "killed because write recovery failed",
3736                  "killed because of SCSI bus reset failure",
3737                  "killed because of double check condition",
3738                  "killed because it was removed",
3739                  "killed because of gross error on SCSI chip",
3740                  "killed because of bad tag returned from drive",
3741                  "killed because of timeout on SCSI command",
3742                  "killed because of reset SCSI command issued from system",
3743                  "killed because busy or parity error count exceeded limit",
3744                  "killed because of 'kill drive' command from system",
3745                  "killed because of selection timeout",
3746                  "killed due to SCSI phase sequence error",
3747                  "killed due to unknown status" };
3748           DAC960_V1_EventLogEntry_T *EventLogEntry =
3749                 Controller->V1.EventLogEntry;
3750           if (EventLogEntry->SequenceNumber ==
3751               Controller->V1.OldEventLogSequenceNumber)
3752             {
3753               unsigned char SenseKey = EventLogEntry->SenseKey;
3754               unsigned char AdditionalSenseCode =
3755                 EventLogEntry->AdditionalSenseCode;
3756               unsigned char AdditionalSenseCodeQualifier =
3757                 EventLogEntry->AdditionalSenseCodeQualifier;
3758               if (SenseKey == DAC960_SenseKey_VendorSpecific &&
3759                   AdditionalSenseCode == 0x80 &&
3760                   AdditionalSenseCodeQualifier <
3761                   ARRAY_SIZE(DAC960_EventMessages))
3762                 DAC960_Critical("Physical Device %d:%d %s\n", Controller,
3763                                 EventLogEntry->Channel,
3764                                 EventLogEntry->TargetID,
3765                                 DAC960_EventMessages[
3766                                   AdditionalSenseCodeQualifier]);
3767               else if (SenseKey == DAC960_SenseKey_UnitAttention &&
3768                        AdditionalSenseCode == 0x29)
3769                 {
3770                   if (Controller->MonitoringTimerCount > 0)
3771                     Controller->V1.DeviceResetCount[EventLogEntry->Channel]
3772                                                    [EventLogEntry->TargetID]++;
3773                 }
3774               else if (!(SenseKey == DAC960_SenseKey_NoSense ||
3775                          (SenseKey == DAC960_SenseKey_NotReady &&
3776                           AdditionalSenseCode == 0x04 &&
3777                           (AdditionalSenseCodeQualifier == 0x01 ||
3778                            AdditionalSenseCodeQualifier == 0x02))))
3779                 {
3780                   DAC960_Critical("Physical Device %d:%d Error Log: "
3781                                   "Sense Key = %X, ASC = %02X, ASCQ = %02X\n",
3782                                   Controller,
3783                                   EventLogEntry->Channel,
3784                                   EventLogEntry->TargetID,
3785                                   SenseKey,
3786                                   AdditionalSenseCode,
3787                                   AdditionalSenseCodeQualifier);
3788                   DAC960_Critical("Physical Device %d:%d Error Log: "
3789                                   "Information = %02X%02X%02X%02X "
3790                                   "%02X%02X%02X%02X\n",
3791                                   Controller,
3792                                   EventLogEntry->Channel,
3793                                   EventLogEntry->TargetID,
3794                                   EventLogEntry->Information[0],
3795                                   EventLogEntry->Information[1],
3796                                   EventLogEntry->Information[2],
3797                                   EventLogEntry->Information[3],
3798                                   EventLogEntry->CommandSpecificInformation[0],
3799                                   EventLogEntry->CommandSpecificInformation[1],
3800                                   EventLogEntry->CommandSpecificInformation[2],
3801                                   EventLogEntry->CommandSpecificInformation[3]);
3802                 }
3803             }
3804           Controller->V1.OldEventLogSequenceNumber++;
3805         }
3806       else if (CommandOpcode == DAC960_V1_GetErrorTable)
3807         {
3808           DAC960_V1_ErrorTable_T *OldErrorTable = &Controller->V1.ErrorTable;
3809           DAC960_V1_ErrorTable_T *NewErrorTable = Controller->V1.NewErrorTable;
3810           int Channel, TargetID;
3811           for (Channel = 0; Channel < Controller->Channels; Channel++)
3812             for (TargetID = 0; TargetID < Controller->Targets; TargetID++)
3813               {
3814                 DAC960_V1_ErrorTableEntry_T *NewErrorEntry =
3815                   &NewErrorTable->ErrorTableEntries[Channel][TargetID];
3816                 DAC960_V1_ErrorTableEntry_T *OldErrorEntry =
3817                   &OldErrorTable->ErrorTableEntries[Channel][TargetID];
3818                 if ((NewErrorEntry->ParityErrorCount !=
3819                      OldErrorEntry->ParityErrorCount) ||
3820                     (NewErrorEntry->SoftErrorCount !=
3821                      OldErrorEntry->SoftErrorCount) ||
3822                     (NewErrorEntry->HardErrorCount !=
3823                      OldErrorEntry->HardErrorCount) ||
3824                     (NewErrorEntry->MiscErrorCount !=
3825                      OldErrorEntry->MiscErrorCount))
3826                   DAC960_Critical("Physical Device %d:%d Errors: "
3827                                   "Parity = %d, Soft = %d, "
3828                                   "Hard = %d, Misc = %d\n",
3829                                   Controller, Channel, TargetID,
3830                                   NewErrorEntry->ParityErrorCount,
3831                                   NewErrorEntry->SoftErrorCount,
3832                                   NewErrorEntry->HardErrorCount,
3833                                   NewErrorEntry->MiscErrorCount);
3834               }
3835           memcpy(&Controller->V1.ErrorTable, Controller->V1.NewErrorTable,
3836                  sizeof(DAC960_V1_ErrorTable_T));
3837         }
3838       else if (CommandOpcode == DAC960_V1_GetDeviceState)
3839         {
3840           DAC960_V1_DeviceState_T *OldDeviceState =
3841             &Controller->V1.DeviceState[Controller->V1.DeviceStateChannel]
3842                                        [Controller->V1.DeviceStateTargetID];
3843           DAC960_V1_DeviceState_T *NewDeviceState =
3844             Controller->V1.NewDeviceState;
3845           if (NewDeviceState->DeviceState != OldDeviceState->DeviceState)
3846             DAC960_Critical("Physical Device %d:%d is now %s\n", Controller,
3847                             Controller->V1.DeviceStateChannel,
3848                             Controller->V1.DeviceStateTargetID,
3849                             (NewDeviceState->DeviceState
3850                              == DAC960_V1_Device_Dead
3851                              ? "DEAD"
3852                              : NewDeviceState->DeviceState
3853                                == DAC960_V1_Device_WriteOnly
3854                                ? "WRITE-ONLY"
3855                                : NewDeviceState->DeviceState
3856                                  == DAC960_V1_Device_Online
3857                                  ? "ONLINE" : "STANDBY"));
3858           if (OldDeviceState->DeviceState == DAC960_V1_Device_Dead &&
3859               NewDeviceState->DeviceState != DAC960_V1_Device_Dead)
3860             {
3861               Controller->V1.NeedDeviceInquiryInformation = true;
3862               Controller->V1.NeedDeviceSerialNumberInformation = true;
3863               Controller->V1.DeviceResetCount
3864                              [Controller->V1.DeviceStateChannel]
3865                              [Controller->V1.DeviceStateTargetID] = 0;
3866             }
3867           memcpy(OldDeviceState, NewDeviceState,
3868                  sizeof(DAC960_V1_DeviceState_T));
3869         }
3870       else if (CommandOpcode == DAC960_V1_GetLogicalDriveInformation)
3871         {
3872           int LogicalDriveNumber;
3873           for (LogicalDriveNumber = 0;
3874                LogicalDriveNumber < Controller->LogicalDriveCount;
3875                LogicalDriveNumber++)
3876             {
3877               DAC960_V1_LogicalDriveInformation_T *OldLogicalDriveInformation =
3878                 &Controller->V1.LogicalDriveInformation[LogicalDriveNumber];
3879               DAC960_V1_LogicalDriveInformation_T *NewLogicalDriveInformation =
3880                 &(*Controller->V1.NewLogicalDriveInformation)[LogicalDriveNumber];
3881               if (NewLogicalDriveInformation->LogicalDriveState !=
3882                   OldLogicalDriveInformation->LogicalDriveState)
3883                 DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) "
3884                                 "is now %s\n", Controller,
3885                                 LogicalDriveNumber,
3886                                 Controller->ControllerNumber,
3887                                 LogicalDriveNumber,
3888                                 (NewLogicalDriveInformation->LogicalDriveState
3889                                  == DAC960_V1_LogicalDrive_Online
3890                                  ? "ONLINE"
3891                                  : NewLogicalDriveInformation->LogicalDriveState
3892                                    == DAC960_V1_LogicalDrive_Critical
3893                                    ? "CRITICAL" : "OFFLINE"));
3894               if (NewLogicalDriveInformation->WriteBack !=
3895                   OldLogicalDriveInformation->WriteBack)
3896                 DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) "
3897                                 "is now %s\n", Controller,
3898                                 LogicalDriveNumber,
3899                                 Controller->ControllerNumber,
3900                                 LogicalDriveNumber,
3901                                 (NewLogicalDriveInformation->WriteBack
3902                                  ? "WRITE BACK" : "WRITE THRU"));
3903             }
3904           memcpy(&Controller->V1.LogicalDriveInformation,
3905                  Controller->V1.NewLogicalDriveInformation,
3906                  sizeof(DAC960_V1_LogicalDriveInformationArray_T));
3907         }
3908       else if (CommandOpcode == DAC960_V1_GetRebuildProgress)
3909         {
3910           unsigned int LogicalDriveNumber =
3911             Controller->V1.RebuildProgress->LogicalDriveNumber;
3912           unsigned int LogicalDriveSize =
3913             Controller->V1.RebuildProgress->LogicalDriveSize;
3914           unsigned int BlocksCompleted =
3915             LogicalDriveSize - Controller->V1.RebuildProgress->RemainingBlocks;
3916           if (CommandStatus == DAC960_V1_NoRebuildOrCheckInProgress &&
3917               Controller->V1.LastRebuildStatus == DAC960_V1_NormalCompletion)
3918             CommandStatus = DAC960_V1_RebuildSuccessful;
3919           switch (CommandStatus)
3920             {
3921             case DAC960_V1_NormalCompletion:
3922               Controller->EphemeralProgressMessage = true;
3923               DAC960_Progress("Rebuild in Progress: "
3924                               "Logical Drive %d (/dev/rd/c%dd%d) "
3925                               "%d%% completed\n",
3926                               Controller, LogicalDriveNumber,
3927                               Controller->ControllerNumber,
3928                               LogicalDriveNumber,
3929                               (100 * (BlocksCompleted >> 7))
3930                               / (LogicalDriveSize >> 7));
3931               Controller->EphemeralProgressMessage = false;
3932               break;
3933             case DAC960_V1_RebuildFailed_LogicalDriveFailure:
3934               DAC960_Progress("Rebuild Failed due to "
3935                               "Logical Drive Failure\n", Controller);
3936               break;
3937             case DAC960_V1_RebuildFailed_BadBlocksOnOther:
3938               DAC960_Progress("Rebuild Failed due to "
3939                               "Bad Blocks on Other Drives\n", Controller);
3940               break;
3941             case DAC960_V1_RebuildFailed_NewDriveFailed:
3942               DAC960_Progress("Rebuild Failed due to "
3943                               "Failure of Drive Being Rebuilt\n", Controller);
3944               break;
3945             case DAC960_V1_NoRebuildOrCheckInProgress:
3946               break;
3947             case DAC960_V1_RebuildSuccessful:
3948               DAC960_Progress("Rebuild Completed Successfully\n", Controller);
3949               break;
3950             case DAC960_V1_RebuildSuccessfullyTerminated:
3951               DAC960_Progress("Rebuild Successfully Terminated\n", Controller);
3952               break;
3953             }
3954           Controller->V1.LastRebuildStatus = CommandStatus;
3955           if (CommandType != DAC960_MonitoringCommand &&
3956               Controller->V1.RebuildStatusPending)
3957             {
3958               Command->V1.CommandStatus = Controller->V1.PendingRebuildStatus;
3959               Controller->V1.RebuildStatusPending = false;
3960             }
3961           else if (CommandType == DAC960_MonitoringCommand &&
3962                    CommandStatus != DAC960_V1_NormalCompletion &&
3963                    CommandStatus != DAC960_V1_NoRebuildOrCheckInProgress)
3964             {
3965               Controller->V1.PendingRebuildStatus = CommandStatus;
3966               Controller->V1.RebuildStatusPending = true;
3967             }
3968         }
3969       else if (CommandOpcode == DAC960_V1_RebuildStat)
3970         {
3971           unsigned int LogicalDriveNumber =
3972             Controller->V1.RebuildProgress->LogicalDriveNumber;
3973           unsigned int LogicalDriveSize =
3974             Controller->V1.RebuildProgress->LogicalDriveSize;
3975           unsigned int BlocksCompleted =
3976             LogicalDriveSize - Controller->V1.RebuildProgress->RemainingBlocks;
3977           if (CommandStatus == DAC960_V1_NormalCompletion)
3978             {
3979               Controller->EphemeralProgressMessage = true;
3980               DAC960_Progress("Consistency Check in Progress: "
3981                               "Logical Drive %d (/dev/rd/c%dd%d) "
3982                               "%d%% completed\n",
3983                               Controller, LogicalDriveNumber,
3984                               Controller->ControllerNumber,
3985                               LogicalDriveNumber,
3986                               (100 * (BlocksCompleted >> 7))
3987                               / (LogicalDriveSize >> 7));
3988               Controller->EphemeralProgressMessage = false;
3989             }
3990         }
3991       else if (CommandOpcode == DAC960_V1_BackgroundInitializationControl)
3992         {
3993           unsigned int LogicalDriveNumber =
3994             Controller->V1.BackgroundInitializationStatus->LogicalDriveNumber;
3995           unsigned int LogicalDriveSize =
3996             Controller->V1.BackgroundInitializationStatus->LogicalDriveSize;
3997           unsigned int BlocksCompleted =
3998             Controller->V1.BackgroundInitializationStatus->BlocksCompleted;
3999           switch (CommandStatus)
4000             {
4001             case DAC960_V1_NormalCompletion:
4002               switch (Controller->V1.BackgroundInitializationStatus->Status)
4003                 {
4004                 case DAC960_V1_BackgroundInitializationInvalid:
4005                   break;
4006                 case DAC960_V1_BackgroundInitializationStarted:
4007                   DAC960_Progress("Background Initialization Started\n",
4008                                   Controller);
4009                   break;
4010                 case DAC960_V1_BackgroundInitializationInProgress:
4011                   if (BlocksCompleted ==
4012                       Controller->V1.LastBackgroundInitializationStatus.
4013                                 BlocksCompleted &&
4014                       LogicalDriveNumber ==
4015                       Controller->V1.LastBackgroundInitializationStatus.
4016                                 LogicalDriveNumber)
4017                     break;
4018                   Controller->EphemeralProgressMessage = true;
4019                   DAC960_Progress("Background Initialization in Progress: "
4020                                   "Logical Drive %d (/dev/rd/c%dd%d) "
4021                                   "%d%% completed\n",
4022                                   Controller, LogicalDriveNumber,
4023                                   Controller->ControllerNumber,
4024                                   LogicalDriveNumber,
4025                                   (100 * (BlocksCompleted >> 7))
4026                                   / (LogicalDriveSize >> 7));
4027                   Controller->EphemeralProgressMessage = false;
4028                   break;
4029                 case DAC960_V1_BackgroundInitializationSuspended:
4030                   DAC960_Progress("Background Initialization Suspended\n",
4031                                   Controller);
4032                   break;
4033                 case DAC960_V1_BackgroundInitializationCancelled:
4034                   DAC960_Progress("Background Initialization Cancelled\n",
4035                                   Controller);
4036                   break;
4037                 }
4038               memcpy(&Controller->V1.LastBackgroundInitializationStatus,
4039                      Controller->V1.BackgroundInitializationStatus,
4040                      sizeof(DAC960_V1_BackgroundInitializationStatus_T));
4041               break;
4042             case DAC960_V1_BackgroundInitSuccessful:
4043               if (Controller->V1.BackgroundInitializationStatus->Status ==
4044                   DAC960_V1_BackgroundInitializationInProgress)
4045                 DAC960_Progress("Background Initialization "
4046                                 "Completed Successfully\n", Controller);
4047               Controller->V1.BackgroundInitializationStatus->Status =
4048                 DAC960_V1_BackgroundInitializationInvalid;
4049               break;
4050             case DAC960_V1_BackgroundInitAborted:
4051               if (Controller->V1.BackgroundInitializationStatus->Status ==
4052                   DAC960_V1_BackgroundInitializationInProgress)
4053                 DAC960_Progress("Background Initialization Aborted\n",
4054                                 Controller);
4055               Controller->V1.BackgroundInitializationStatus->Status =
4056                 DAC960_V1_BackgroundInitializationInvalid;
4057               break;
4058             case DAC960_V1_NoBackgroundInitInProgress:
4059               break;
4060             }
4061         }
4062       else if (CommandOpcode == DAC960_V1_DCDB)
4063         {
4064            /*
4065              This is a bit ugly.
4066
4067              The InquiryStandardData and
4068              the InquiryUntitSerialNumber information
4069              retrieval operations BOTH use the DAC960_V1_DCDB
4070              commands.  the test above can't distinguish between
4071              these two cases.
4072
4073              Instead, we rely on the order of code later in this
4074              function to ensure that DeviceInquiryInformation commands
4075              are submitted before DeviceSerialNumber commands.
4076            */
4077            if (Controller->V1.NeedDeviceInquiryInformation)
4078              {
4079                 DAC960_SCSI_Inquiry_T *InquiryStandardData =
4080                         &Controller->V1.InquiryStandardData
4081                                 [Controller->V1.DeviceStateChannel]
4082                                 [Controller->V1.DeviceStateTargetID];
4083                 if (CommandStatus != DAC960_V1_NormalCompletion)
4084                    {
4085                         memset(InquiryStandardData, 0,
4086                                 sizeof(DAC960_SCSI_Inquiry_T));
4087                         InquiryStandardData->PeripheralDeviceType = 0x1F;
4088                     }
4089                  else
4090                         memcpy(InquiryStandardData,
4091                                 Controller->V1.NewInquiryStandardData,
4092                                 sizeof(DAC960_SCSI_Inquiry_T));
4093                  Controller->V1.NeedDeviceInquiryInformation = false;
4094               }
4095            else if (Controller->V1.NeedDeviceSerialNumberInformation)
4096               {
4097                 DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
4098                   &Controller->V1.InquiryUnitSerialNumber
4099                                 [Controller->V1.DeviceStateChannel]
4100                                 [Controller->V1.DeviceStateTargetID];
4101                  if (CommandStatus != DAC960_V1_NormalCompletion)
4102                    {
4103                         memset(InquiryUnitSerialNumber, 0,
4104                                 sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
4105                         InquiryUnitSerialNumber->PeripheralDeviceType = 0x1F;
4106                     }
4107                   else
4108                         memcpy(InquiryUnitSerialNumber,
4109                                 Controller->V1.NewInquiryUnitSerialNumber,
4110                                 sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
4111               Controller->V1.NeedDeviceSerialNumberInformation = false;
4112              }
4113         }
4114       /*
4115         Begin submitting new monitoring commands.
4116        */
4117       if (Controller->V1.NewEventLogSequenceNumber
4118           - Controller->V1.OldEventLogSequenceNumber > 0)
4119         {
4120           Command->V1.CommandMailbox.Type3E.CommandOpcode =
4121             DAC960_V1_PerformEventLogOperation;
4122           Command->V1.CommandMailbox.Type3E.OperationType =
4123             DAC960_V1_GetEventLogEntry;
4124           Command->V1.CommandMailbox.Type3E.OperationQualifier = 1;
4125           Command->V1.CommandMailbox.Type3E.SequenceNumber =
4126             Controller->V1.OldEventLogSequenceNumber;
4127           Command->V1.CommandMailbox.Type3E.BusAddress =
4128                 Controller->V1.EventLogEntryDMA;
4129           DAC960_QueueCommand(Command);
4130           return;
4131         }
4132       if (Controller->V1.NeedErrorTableInformation)
4133         {
4134           Controller->V1.NeedErrorTableInformation = false;
4135           Command->V1.CommandMailbox.Type3.CommandOpcode =
4136             DAC960_V1_GetErrorTable;
4137           Command->V1.CommandMailbox.Type3.BusAddress =
4138                 Controller->V1.NewErrorTableDMA;
4139           DAC960_QueueCommand(Command);
4140           return;
4141         }
4142       if (Controller->V1.NeedRebuildProgress &&
4143           Controller->V1.RebuildProgressFirst)
4144         {
4145           Controller->V1.NeedRebuildProgress = false;
4146           Command->V1.CommandMailbox.Type3.CommandOpcode =
4147             DAC960_V1_GetRebuildProgress;
4148           Command->V1.CommandMailbox.Type3.BusAddress =
4149             Controller->V1.RebuildProgressDMA;
4150           DAC960_QueueCommand(Command);
4151           return;
4152         }
4153       if (Controller->V1.NeedDeviceStateInformation)
4154         {
4155           if (Controller->V1.NeedDeviceInquiryInformation)
4156             {
4157               DAC960_V1_DCDB_T *DCDB = Controller->V1.MonitoringDCDB;
4158               dma_addr_t DCDB_DMA = Controller->V1.MonitoringDCDB_DMA;
4159
4160               dma_addr_t NewInquiryStandardDataDMA =
4161                 Controller->V1.NewInquiryStandardDataDMA;
4162
4163               Command->V1.CommandMailbox.Type3.CommandOpcode = DAC960_V1_DCDB;
4164               Command->V1.CommandMailbox.Type3.BusAddress = DCDB_DMA;
4165               DCDB->Channel = Controller->V1.DeviceStateChannel;
4166               DCDB->TargetID = Controller->V1.DeviceStateTargetID;
4167               DCDB->Direction = DAC960_V1_DCDB_DataTransferDeviceToSystem;
4168               DCDB->EarlyStatus = false;
4169               DCDB->Timeout = DAC960_V1_DCDB_Timeout_10_seconds;
4170               DCDB->NoAutomaticRequestSense = false;
4171               DCDB->DisconnectPermitted = true;
4172               DCDB->TransferLength = sizeof(DAC960_SCSI_Inquiry_T);
4173               DCDB->BusAddress = NewInquiryStandardDataDMA;
4174               DCDB->CDBLength = 6;
4175               DCDB->TransferLengthHigh4 = 0;
4176               DCDB->SenseLength = sizeof(DCDB->SenseData);
4177               DCDB->CDB[0] = 0x12; /* INQUIRY */
4178               DCDB->CDB[1] = 0; /* EVPD = 0 */
4179               DCDB->CDB[2] = 0; /* Page Code */
4180               DCDB->CDB[3] = 0; /* Reserved */
4181               DCDB->CDB[4] = sizeof(DAC960_SCSI_Inquiry_T);
4182               DCDB->CDB[5] = 0; /* Control */
4183               DAC960_QueueCommand(Command);
4184               return;
4185             }
4186           if (Controller->V1.NeedDeviceSerialNumberInformation)
4187             {
4188               DAC960_V1_DCDB_T *DCDB = Controller->V1.MonitoringDCDB;
4189               dma_addr_t DCDB_DMA = Controller->V1.MonitoringDCDB_DMA;
4190               dma_addr_t NewInquiryUnitSerialNumberDMA =
4191                         Controller->V1.NewInquiryUnitSerialNumberDMA;
4192
4193               Command->V1.CommandMailbox.Type3.CommandOpcode = DAC960_V1_DCDB;
4194               Command->V1.CommandMailbox.Type3.BusAddress = DCDB_DMA;
4195               DCDB->Channel = Controller->V1.DeviceStateChannel;
4196               DCDB->TargetID = Controller->V1.DeviceStateTargetID;
4197               DCDB->Direction = DAC960_V1_DCDB_DataTransferDeviceToSystem;
4198               DCDB->EarlyStatus = false;
4199               DCDB->Timeout = DAC960_V1_DCDB_Timeout_10_seconds;
4200               DCDB->NoAutomaticRequestSense = false;
4201               DCDB->DisconnectPermitted = true;
4202               DCDB->TransferLength =
4203                 sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T);
4204               DCDB->BusAddress = NewInquiryUnitSerialNumberDMA;
4205               DCDB->CDBLength = 6;
4206               DCDB->TransferLengthHigh4 = 0;
4207               DCDB->SenseLength = sizeof(DCDB->SenseData);
4208               DCDB->CDB[0] = 0x12; /* INQUIRY */
4209               DCDB->CDB[1] = 1; /* EVPD = 1 */
4210               DCDB->CDB[2] = 0x80; /* Page Code */
4211               DCDB->CDB[3] = 0; /* Reserved */
4212               DCDB->CDB[4] = sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T);
4213               DCDB->CDB[5] = 0; /* Control */
4214               DAC960_QueueCommand(Command);
4215               return;
4216             }
4217           if (Controller->V1.StartDeviceStateScan)
4218             {
4219               Controller->V1.DeviceStateChannel = 0;
4220               Controller->V1.DeviceStateTargetID = 0;
4221               Controller->V1.StartDeviceStateScan = false;
4222             }
4223           else if (++Controller->V1.DeviceStateTargetID == Controller->Targets)
4224             {
4225               Controller->V1.DeviceStateChannel++;
4226               Controller->V1.DeviceStateTargetID = 0;
4227             }
4228           if (Controller->V1.DeviceStateChannel < Controller->Channels)
4229             {
4230               Controller->V1.NewDeviceState->DeviceState =
4231                 DAC960_V1_Device_Dead;
4232               Command->V1.CommandMailbox.Type3D.CommandOpcode =
4233                 DAC960_V1_GetDeviceState;
4234               Command->V1.CommandMailbox.Type3D.Channel =
4235                 Controller->V1.DeviceStateChannel;
4236               Command->V1.CommandMailbox.Type3D.TargetID =
4237                 Controller->V1.DeviceStateTargetID;
4238               Command->V1.CommandMailbox.Type3D.BusAddress =
4239                 Controller->V1.NewDeviceStateDMA;
4240               DAC960_QueueCommand(Command);
4241               return;
4242             }
4243           Controller->V1.NeedDeviceStateInformation = false;
4244         }
4245       if (Controller->V1.NeedLogicalDriveInformation)
4246         {
4247           Controller->V1.NeedLogicalDriveInformation = false;
4248           Command->V1.CommandMailbox.Type3.CommandOpcode =
4249             DAC960_V1_GetLogicalDriveInformation;
4250           Command->V1.CommandMailbox.Type3.BusAddress =
4251             Controller->V1.NewLogicalDriveInformationDMA;
4252           DAC960_QueueCommand(Command);
4253           return;
4254         }
4255       if (Controller->V1.NeedRebuildProgress)
4256         {
4257           Controller->V1.NeedRebuildProgress = false;
4258           Command->V1.CommandMailbox.Type3.CommandOpcode =
4259             DAC960_V1_GetRebuildProgress;
4260           Command->V1.CommandMailbox.Type3.BusAddress =
4261                 Controller->V1.RebuildProgressDMA;
4262           DAC960_QueueCommand(Command);
4263           return;
4264         }
4265       if (Controller->V1.NeedConsistencyCheckProgress)
4266         {
4267           Controller->V1.NeedConsistencyCheckProgress = false;
4268           Command->V1.CommandMailbox.Type3.CommandOpcode =
4269             DAC960_V1_RebuildStat;
4270           Command->V1.CommandMailbox.Type3.BusAddress =
4271             Controller->V1.RebuildProgressDMA;
4272           DAC960_QueueCommand(Command);
4273           return;
4274         }
4275       if (Controller->V1.NeedBackgroundInitializationStatus)
4276         {
4277           Controller->V1.NeedBackgroundInitializationStatus = false;
4278           Command->V1.CommandMailbox.Type3B.CommandOpcode =
4279             DAC960_V1_BackgroundInitializationControl;
4280           Command->V1.CommandMailbox.Type3B.CommandOpcode2 = 0x20;
4281           Command->V1.CommandMailbox.Type3B.BusAddress =
4282             Controller->V1.BackgroundInitializationStatusDMA;
4283           DAC960_QueueCommand(Command);
4284           return;
4285         }
4286       Controller->MonitoringTimerCount++;
4287       Controller->MonitoringTimer.expires =
4288         jiffies + DAC960_MonitoringTimerInterval;
4289         add_timer(&Controller->MonitoringTimer);
4290     }
4291   if (CommandType == DAC960_ImmediateCommand)
4292     {
4293       complete(Command->Completion);
4294       Command->Completion = NULL;
4295       return;
4296     }
4297   if (CommandType == DAC960_QueuedCommand)
4298     {
4299       DAC960_V1_KernelCommand_T *KernelCommand = Command->V1.KernelCommand;
4300       KernelCommand->CommandStatus = Command->V1.CommandStatus;
4301       Command->V1.KernelCommand = NULL;
4302       if (CommandOpcode == DAC960_V1_DCDB)
4303         Controller->V1.DirectCommandActive[KernelCommand->DCDB->Channel]
4304                                           [KernelCommand->DCDB->TargetID] =
4305           false;
4306       DAC960_DeallocateCommand(Command);
4307       KernelCommand->CompletionFunction(KernelCommand);
4308       return;
4309     }
4310   /*
4311     Queue a Status Monitoring Command to the Controller using the just
4312     completed Command if one was deferred previously due to lack of a
4313     free Command when the Monitoring Timer Function was called.
4314   */
4315   if (Controller->MonitoringCommandDeferred)
4316     {
4317       Controller->MonitoringCommandDeferred = false;
4318       DAC960_V1_QueueMonitoringCommand(Command);
4319       return;
4320     }
4321   /*
4322     Deallocate the Command.
4323   */
4324   DAC960_DeallocateCommand(Command);
4325   /*
4326     Wake up any processes waiting on a free Command.
4327   */
4328   wake_up(&Controller->CommandWaitQueue);
4329 }
4330
4331
4332 /*
4333   DAC960_V2_ReadWriteError prints an appropriate error message for Command
4334   when an error occurs on a Read or Write operation.
4335 */
4336
4337 static void DAC960_V2_ReadWriteError(DAC960_Command_T *Command)
4338 {
4339   DAC960_Controller_T *Controller = Command->Controller;
4340   unsigned char *SenseErrors[] = { "NO SENSE", "RECOVERED ERROR",
4341                                    "NOT READY", "MEDIUM ERROR",
4342                                    "HARDWARE ERROR", "ILLEGAL REQUEST",
4343                                    "UNIT ATTENTION", "DATA PROTECT",
4344                                    "BLANK CHECK", "VENDOR-SPECIFIC",
4345                                    "COPY ABORTED", "ABORTED COMMAND",
4346                                    "EQUAL", "VOLUME OVERFLOW",
4347                                    "MISCOMPARE", "RESERVED" };
4348   unsigned char *CommandName = "UNKNOWN";
4349   switch (Command->CommandType)
4350     {
4351     case DAC960_ReadCommand:
4352     case DAC960_ReadRetryCommand:
4353       CommandName = "READ";
4354       break;
4355     case DAC960_WriteCommand:
4356     case DAC960_WriteRetryCommand:
4357       CommandName = "WRITE";
4358       break;
4359     case DAC960_MonitoringCommand:
4360     case DAC960_ImmediateCommand:
4361     case DAC960_QueuedCommand:
4362       break;
4363     }
4364   DAC960_Error("Error Condition %s on %s:\n", Controller,
4365                SenseErrors[Command->V2.RequestSense->SenseKey], CommandName);
4366   DAC960_Error("  /dev/rd/c%dd%d:   absolute blocks %u..%u\n",
4367                Controller, Controller->ControllerNumber,
4368                Command->LogicalDriveNumber, Command->BlockNumber,
4369                Command->BlockNumber + Command->BlockCount - 1);
4370 }
4371
4372
4373 /*
4374   DAC960_V2_ReportEvent prints an appropriate message when a Controller Event
4375   occurs.
4376 */
4377
4378 static void DAC960_V2_ReportEvent(DAC960_Controller_T *Controller,
4379                                   DAC960_V2_Event_T *Event)
4380 {
4381   DAC960_SCSI_RequestSense_T *RequestSense =
4382     (DAC960_SCSI_RequestSense_T *) &Event->RequestSenseData;
4383   unsigned char MessageBuffer[DAC960_LineBufferSize];
4384   static struct { int EventCode; unsigned char *EventMessage; } EventList[] =
4385     { /* Physical Device Events (0x0000 - 0x007F) */
4386       { 0x0001, "P Online" },
4387       { 0x0002, "P Standby" },
4388       { 0x0005, "P Automatic Rebuild Started" },
4389       { 0x0006, "P Manual Rebuild Started" },
4390       { 0x0007, "P Rebuild Completed" },
4391       { 0x0008, "P Rebuild Cancelled" },
4392       { 0x0009, "P Rebuild Failed for Unknown Reasons" },
4393       { 0x000A, "P Rebuild Failed due to New Physical Device" },
4394       { 0x000B, "P Rebuild Failed due to Logical Drive Failure" },
4395       { 0x000C, "S Offline" },
4396       { 0x000D, "P Found" },
4397       { 0x000E, "P Removed" },
4398       { 0x000F, "P Unconfigured" },
4399       { 0x0010, "P Expand Capacity Started" },
4400       { 0x0011, "P Expand Capacity Completed" },
4401       { 0x0012, "P Expand Capacity Failed" },
4402       { 0x0013, "P Command Timed Out" },
4403       { 0x0014, "P Command Aborted" },
4404       { 0x0015, "P Command Retried" },
4405       { 0x0016, "P Parity Error" },
4406       { 0x0017, "P Soft Error" },
4407       { 0x0018, "P Miscellaneous Error" },
4408       { 0x0019, "P Reset" },
4409       { 0x001A, "P Active Spare Found" },
4410       { 0x001B, "P Warm Spare Found" },
4411       { 0x001C, "S Sense Data Received" },
4412       { 0x001D, "P Initialization Started" },
4413       { 0x001E, "P Initialization Completed" },
4414       { 0x001F, "P Initialization Failed" },
4415       { 0x0020, "P Initialization Cancelled" },
4416       { 0x0021, "P Failed because Write Recovery Failed" },
4417       { 0x0022, "P Failed because SCSI Bus Reset Failed" },
4418       { 0x0023, "P Failed because of Double Check Condition" },
4419       { 0x0024, "P Failed because Device Cannot Be Accessed" },
4420       { 0x0025, "P Failed because of Gross Error on SCSI Processor" },
4421       { 0x0026, "P Failed because of Bad Tag from Device" },
4422       { 0x0027, "P Failed because of Command Timeout" },
4423       { 0x0028, "P Failed because of System Reset" },
4424       { 0x0029, "P Failed because of Busy Status or Parity Error" },
4425       { 0x002A, "P Failed because Host Set Device to Failed State" },
4426       { 0x002B, "P Failed because of Selection Timeout" },
4427       { 0x002C, "P Failed because of SCSI Bus Phase Error" },
4428       { 0x002D, "P Failed because Device Returned Unknown Status" },
4429       { 0x002E, "P Failed because Device Not Ready" },
4430       { 0x002F, "P Failed because Device Not Found at Startup" },
4431       { 0x0030, "P Failed because COD Write Operation Failed" },
4432       { 0x0031, "P Failed because BDT Write Operation Failed" },
4433       { 0x0039, "P Missing at Startup" },
4434       { 0x003A, "P Start Rebuild Failed due to Physical Drive Too Small" },
4435       { 0x003C, "P Temporarily Offline Device Automatically Made Online" },
4436       { 0x003D, "P Standby Rebuild Started" },
4437       /* Logical Device Events (0x0080 - 0x00FF) */
4438       { 0x0080, "M Consistency Check Started" },
4439       { 0x0081, "M Consistency Check Completed" },
4440       { 0x0082, "M Consistency Check Cancelled" },
4441       { 0x0083, "M Consistency Check Completed With Errors" },
4442       { 0x0084, "M Consistency Check Failed due to Logical Drive Failure" },
4443       { 0x0085, "M Consistency Check Failed due to Physical Device Failure" },
4444       { 0x0086, "L Offline" },
4445       { 0x0087, "L Critical" },
4446       { 0x0088, "L Online" },
4447       { 0x0089, "M Automatic Rebuild Started" },
4448       { 0x008A, "M Manual Rebuild Started" },
4449       { 0x008B, "M Rebuild Completed" },
4450       { 0x008C, "M Rebuild Cancelled" },
4451       { 0x008D, "M Rebuild Failed for Unknown Reasons" },
4452       { 0x008E, "M Rebuild Failed due to New Physical Device" },
4453       { 0x008F, "M Rebuild Failed due to Logical Drive Failure" },
4454       { 0x0090, "M Initialization Started" },
4455       { 0x0091, "M Initialization Completed" },
4456       { 0x0092, "M Initialization Cancelled" },
4457       { 0x0093, "M Initialization Failed" },
4458       { 0x0094, "L Found" },
4459       { 0x0095, "L Deleted" },
4460       { 0x0096, "M Expand Capacity Started" },
4461       { 0x0097, "M Expand Capacity Completed" },
4462       { 0x0098, "M Expand Capacity Failed" },
4463       { 0x0099, "L Bad Block Found" },
4464       { 0x009A, "L Size Changed" },
4465       { 0x009B, "L Type Changed" },
4466       { 0x009C, "L Bad Data Block Found" },
4467       { 0x009E, "L Read of Data Block in BDT" },
4468       { 0x009F, "L Write Back Data for Disk Block Lost" },
4469       { 0x00A0, "L Temporarily Offline RAID-5/3 Drive Made Online" },
4470       { 0x00A1, "L Temporarily Offline RAID-6/1/0/7 Drive Made Online" },
4471       { 0x00A2, "L Standby Rebuild Started" },
4472       /* Fault Management Events (0x0100 - 0x017F) */
4473       { 0x0140, "E Fan %d Failed" },
4474       { 0x0141, "E Fan %d OK" },
4475       { 0x0142, "E Fan %d Not Present" },
4476       { 0x0143, "E Power Supply %d Failed" },
4477       { 0x0144, "E Power Supply %d OK" },
4478       { 0x0145, "E Power Supply %d Not Present" },
4479       { 0x0146, "E Temperature Sensor %d Temperature Exceeds Safe Limit" },
4480       { 0x0147, "E Temperature Sensor %d Temperature Exceeds Working Limit" },
4481       { 0x0148, "E Temperature Sensor %d Temperature Normal" },
4482       { 0x0149, "E Temperature Sensor %d Not Present" },
4483       { 0x014A, "E Enclosure Management Unit %d Access Critical" },
4484       { 0x014B, "E Enclosure Management Unit %d Access OK" },
4485       { 0x014C, "E Enclosure Management Unit %d Access Offline" },
4486       /* Controller Events (0x0180 - 0x01FF) */
4487       { 0x0181, "C Cache Write Back Error" },
4488       { 0x0188, "C Battery Backup Unit Found" },
4489       { 0x0189, "C Battery Backup Unit Charge Level Low" },
4490       { 0x018A, "C Battery Backup Unit Charge Level OK" },
4491       { 0x0193, "C Installation Aborted" },
4492       { 0x0195, "C Battery Backup Unit Physically Removed" },
4493       { 0x0196, "C Memory Error During Warm Boot" },
4494       { 0x019E, "C Memory Soft ECC Error Corrected" },
4495       { 0x019F, "C Memory Hard ECC Error Corrected" },
4496       { 0x01A2, "C Battery Backup Unit Failed" },
4497       { 0x01AB, "C Mirror Race Recovery Failed" },
4498       { 0x01AC, "C Mirror Race on Critical Drive" },
4499       /* Controller Internal Processor Events */
4500       { 0x0380, "C Internal Controller Hung" },
4501       { 0x0381, "C Internal Controller Firmware Breakpoint" },
4502       { 0x0390, "C Internal Controller i960 Processor Specific Error" },
4503       { 0x03A0, "C Internal Controller StrongARM Processor Specific Error" },
4504       { 0, "" } };
4505   int EventListIndex = 0, EventCode;
4506   unsigned char EventType, *EventMessage;
4507   if (Event->EventCode == 0x1C &&
4508       RequestSense->SenseKey == DAC960_SenseKey_VendorSpecific &&
4509       (RequestSense->AdditionalSenseCode == 0x80 ||
4510        RequestSense->AdditionalSenseCode == 0x81))
4511     Event->EventCode = ((RequestSense->AdditionalSenseCode - 0x80) << 8) |
4512                        RequestSense->AdditionalSenseCodeQualifier;
4513   while (true)
4514     {
4515       EventCode = EventList[EventListIndex].EventCode;
4516       if (EventCode == Event->EventCode || EventCode == 0) break;
4517       EventListIndex++;
4518     }
4519   EventType = EventList[EventListIndex].EventMessage[0];
4520   EventMessage = &EventList[EventListIndex].EventMessage[2];
4521   if (EventCode == 0)
4522     {
4523       DAC960_Critical("Unknown Controller Event Code %04X\n",
4524                       Controller, Event->EventCode);
4525       return;
4526     }
4527   switch (EventType)
4528     {
4529     case 'P':
4530       DAC960_Critical("Physical Device %d:%d %s\n", Controller,
4531                       Event->Channel, Event->TargetID, EventMessage);
4532       break;
4533     case 'L':
4534       DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) %s\n", Controller,
4535                       Event->LogicalUnit, Controller->ControllerNumber,
4536                       Event->LogicalUnit, EventMessage);
4537       break;
4538     case 'M':
4539       DAC960_Progress("Logical Drive %d (/dev/rd/c%dd%d) %s\n", Controller,
4540                       Event->LogicalUnit, Controller->ControllerNumber,
4541                       Event->LogicalUnit, EventMessage);
4542       break;
4543     case 'S':
4544       if (RequestSense->SenseKey == DAC960_SenseKey_NoSense ||
4545           (RequestSense->SenseKey == DAC960_SenseKey_NotReady &&
4546            RequestSense->AdditionalSenseCode == 0x04 &&
4547            (RequestSense->AdditionalSenseCodeQualifier == 0x01 ||
4548             RequestSense->AdditionalSenseCodeQualifier == 0x02)))
4549         break;
4550       DAC960_Critical("Physical Device %d:%d %s\n", Controller,
4551                       Event->Channel, Event->TargetID, EventMessage);
4552       DAC960_Critical("Physical Device %d:%d Request Sense: "
4553                       "Sense Key = %X, ASC = %02X, ASCQ = %02X\n",
4554                       Controller,
4555                       Event->Channel,
4556                       Event->TargetID,
4557                       RequestSense->SenseKey,
4558                       RequestSense->AdditionalSenseCode,
4559                       RequestSense->AdditionalSenseCodeQualifier);
4560       DAC960_Critical("Physical Device %d:%d Request Sense: "
4561                       "Information = %02X%02X%02X%02X "
4562                       "%02X%02X%02X%02X\n",
4563                       Controller,
4564                       Event->Channel,
4565                       Event->TargetID,
4566                       RequestSense->Information[0],
4567                       RequestSense->Information[1],
4568                       RequestSense->Information[2],
4569                       RequestSense->Information[3],
4570                       RequestSense->CommandSpecificInformation[0],
4571                       RequestSense->CommandSpecificInformation[1],
4572                       RequestSense->CommandSpecificInformation[2],
4573                       RequestSense->CommandSpecificInformation[3]);
4574       break;
4575     case 'E':
4576       if (Controller->SuppressEnclosureMessages) break;
4577       sprintf(MessageBuffer, EventMessage, Event->LogicalUnit);
4578       DAC960_Critical("Enclosure %d %s\n", Controller,
4579                       Event->TargetID, MessageBuffer);
4580       break;
4581     case 'C':
4582       DAC960_Critical("Controller %s\n", Controller, EventMessage);
4583       break;
4584     default:
4585       DAC960_Critical("Unknown Controller Event Code %04X\n",
4586                       Controller, Event->EventCode);
4587       break;
4588     }
4589 }
4590
4591
4592 /*
4593   DAC960_V2_ReportProgress prints an appropriate progress message for
4594   Logical Device Long Operations.
4595 */
4596
4597 static void DAC960_V2_ReportProgress(DAC960_Controller_T *Controller,
4598                                      unsigned char *MessageString,
4599                                      unsigned int LogicalDeviceNumber,
4600                                      unsigned long BlocksCompleted,
4601                                      unsigned long LogicalDeviceSize)
4602 {
4603   Controller->EphemeralProgressMessage = true;
4604   DAC960_Progress("%s in Progress: Logical Drive %d (/dev/rd/c%dd%d) "
4605                   "%d%% completed\n", Controller,
4606                   MessageString,
4607                   LogicalDeviceNumber,
4608                   Controller->ControllerNumber,
4609                   LogicalDeviceNumber,
4610                   (100 * (BlocksCompleted >> 7)) / (LogicalDeviceSize >> 7));
4611   Controller->EphemeralProgressMessage = false;
4612 }
4613
4614
4615 /*
4616   DAC960_V2_ProcessCompletedCommand performs completion processing for Command
4617   for DAC960 V2 Firmware Controllers.
4618 */
4619
4620 static void DAC960_V2_ProcessCompletedCommand(DAC960_Command_T *Command)
4621 {
4622   DAC960_Controller_T *Controller = Command->Controller;
4623   DAC960_CommandType_T CommandType = Command->CommandType;
4624   DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
4625   DAC960_V2_IOCTL_Opcode_T CommandOpcode = CommandMailbox->Common.IOCTL_Opcode;
4626   DAC960_V2_CommandStatus_T CommandStatus = Command->V2.CommandStatus;
4627
4628   if (CommandType == DAC960_ReadCommand ||
4629       CommandType == DAC960_WriteCommand)
4630     {
4631
4632 #ifdef FORCE_RETRY_DEBUG
4633       CommandStatus = DAC960_V2_AbormalCompletion;
4634 #endif
4635       Command->V2.RequestSense->SenseKey = DAC960_SenseKey_MediumError;
4636
4637       if (CommandStatus == DAC960_V2_NormalCompletion) {
4638
4639                 if (!DAC960_ProcessCompletedRequest(Command, true))
4640                         BUG();
4641
4642       } else if (Command->V2.RequestSense->SenseKey == DAC960_SenseKey_MediumError)
4643         {
4644           /*
4645            * break the command down into pieces and resubmit each
4646            * piece, hoping that some of them will succeed.
4647            */
4648            DAC960_queue_partial_rw(Command);
4649            return;
4650         }
4651       else
4652         {
4653           if (Command->V2.RequestSense->SenseKey != DAC960_SenseKey_NotReady)
4654             DAC960_V2_ReadWriteError(Command);
4655           /*
4656             Perform completion processing for all buffers in this I/O Request.
4657           */
4658           (void)DAC960_ProcessCompletedRequest(Command, false);
4659         }
4660     }
4661   else if (CommandType == DAC960_ReadRetryCommand ||
4662            CommandType == DAC960_WriteRetryCommand)
4663     {
4664       boolean normal_completion;
4665
4666 #ifdef FORCE_RETRY_FAILURE_DEBUG
4667       static int retry_count = 1;
4668 #endif
4669       /*
4670         Perform completion processing for the portion that was
4671         retried, and submit the next portion, if any.
4672       */
4673       normal_completion = true;
4674       if (CommandStatus != DAC960_V2_NormalCompletion) {
4675         normal_completion = false;
4676         if (Command->V2.RequestSense->SenseKey != DAC960_SenseKey_NotReady)
4677             DAC960_V2_ReadWriteError(Command);
4678       }
4679
4680 #ifdef FORCE_RETRY_FAILURE_DEBUG
4681       if (!(++retry_count % 10000)) {
4682               printk("V2 error retry failure test\n");
4683               normal_completion = false;
4684               DAC960_V2_ReadWriteError(Command);
4685       }
4686 #endif
4687
4688       if (!DAC960_ProcessCompletedRequest(Command, normal_completion)) {
4689                 DAC960_queue_partial_rw(Command);
4690                 return;
4691       }
4692     }
4693   else if (CommandType == DAC960_MonitoringCommand)
4694     {
4695       if (Controller->ShutdownMonitoringTimer)
4696               return;
4697       if (CommandOpcode == DAC960_V2_GetControllerInfo)
4698         {
4699           DAC960_V2_ControllerInfo_T *NewControllerInfo =
4700             Controller->V2.NewControllerInformation;
4701           DAC960_V2_ControllerInfo_T *ControllerInfo =
4702             &Controller->V2.ControllerInformation;
4703           Controller->LogicalDriveCount =
4704             NewControllerInfo->LogicalDevicesPresent;
4705           Controller->V2.NeedLogicalDeviceInformation = true;
4706           Controller->V2.NeedPhysicalDeviceInformation = true;
4707           Controller->V2.StartLogicalDeviceInformationScan = true;
4708           Controller->V2.StartPhysicalDeviceInformationScan = true;
4709           Controller->MonitoringAlertMode =
4710             (NewControllerInfo->LogicalDevicesCritical > 0 ||
4711              NewControllerInfo->LogicalDevicesOffline > 0 ||
4712              NewControllerInfo->PhysicalDisksCritical > 0 ||
4713              NewControllerInfo->PhysicalDisksOffline > 0);
4714           memcpy(ControllerInfo, NewControllerInfo,
4715                  sizeof(DAC960_V2_ControllerInfo_T));
4716         }
4717       else if (CommandOpcode == DAC960_V2_GetEvent)
4718         {
4719           if (CommandStatus == DAC960_V2_NormalCompletion) {
4720             DAC960_V2_ReportEvent(Controller, Controller->V2.Event);
4721           }
4722           Controller->V2.NextEventSequenceNumber++;
4723         }
4724       else if (CommandOpcode == DAC960_V2_GetPhysicalDeviceInfoValid &&
4725                CommandStatus == DAC960_V2_NormalCompletion)
4726         {
4727           DAC960_V2_PhysicalDeviceInfo_T *NewPhysicalDeviceInfo =
4728             Controller->V2.NewPhysicalDeviceInformation;
4729           unsigned int PhysicalDeviceIndex = Controller->V2.PhysicalDeviceIndex;
4730           DAC960_V2_PhysicalDeviceInfo_T *PhysicalDeviceInfo =
4731             Controller->V2.PhysicalDeviceInformation[PhysicalDeviceIndex];
4732           DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
4733             Controller->V2.InquiryUnitSerialNumber[PhysicalDeviceIndex];
4734           unsigned int DeviceIndex;
4735           while (PhysicalDeviceInfo != NULL &&
4736                  (NewPhysicalDeviceInfo->Channel >
4737                   PhysicalDeviceInfo->Channel ||
4738                   (NewPhysicalDeviceInfo->Channel ==
4739                    PhysicalDeviceInfo->Channel &&
4740                    (NewPhysicalDeviceInfo->TargetID >
4741                     PhysicalDeviceInfo->TargetID ||
4742                    (NewPhysicalDeviceInfo->TargetID ==
4743                     PhysicalDeviceInfo->TargetID &&
4744                     NewPhysicalDeviceInfo->LogicalUnit >
4745                     PhysicalDeviceInfo->LogicalUnit)))))
4746             {
4747               DAC960_Critical("Physical Device %d:%d No Longer Exists\n",
4748                               Controller,
4749                               PhysicalDeviceInfo->Channel,
4750                               PhysicalDeviceInfo->TargetID);
4751               Controller->V2.PhysicalDeviceInformation
4752                              [PhysicalDeviceIndex] = NULL;
4753               Controller->V2.InquiryUnitSerialNumber
4754                              [PhysicalDeviceIndex] = NULL;
4755               kfree(PhysicalDeviceInfo);
4756               kfree(InquiryUnitSerialNumber);
4757               for (DeviceIndex = PhysicalDeviceIndex;
4758                    DeviceIndex < DAC960_V2_MaxPhysicalDevices - 1;
4759                    DeviceIndex++)
4760                 {
4761                   Controller->V2.PhysicalDeviceInformation[DeviceIndex] =
4762                     Controller->V2.PhysicalDeviceInformation[DeviceIndex+1];
4763                   Controller->V2.InquiryUnitSerialNumber[DeviceIndex] =
4764                     Controller->V2.InquiryUnitSerialNumber[DeviceIndex+1];
4765                 }
4766               Controller->V2.PhysicalDeviceInformation
4767                              [DAC960_V2_MaxPhysicalDevices-1] = NULL;
4768               Controller->V2.InquiryUnitSerialNumber
4769                              [DAC960_V2_MaxPhysicalDevices-1] = NULL;
4770               PhysicalDeviceInfo =
4771                 Controller->V2.PhysicalDeviceInformation[PhysicalDeviceIndex];
4772               InquiryUnitSerialNumber =
4773                 Controller->V2.InquiryUnitSerialNumber[PhysicalDeviceIndex];
4774             }
4775           if (PhysicalDeviceInfo == NULL ||
4776               (NewPhysicalDeviceInfo->Channel !=
4777                PhysicalDeviceInfo->Channel) ||
4778               (NewPhysicalDeviceInfo->TargetID !=
4779                PhysicalDeviceInfo->TargetID) ||
4780               (NewPhysicalDeviceInfo->LogicalUnit !=
4781                PhysicalDeviceInfo->LogicalUnit))
4782             {
4783               PhysicalDeviceInfo =
4784                 kmalloc(sizeof(DAC960_V2_PhysicalDeviceInfo_T), GFP_ATOMIC);
4785               InquiryUnitSerialNumber =
4786                   kmalloc(sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T),
4787                           GFP_ATOMIC);
4788               if (InquiryUnitSerialNumber == NULL ||
4789                   PhysicalDeviceInfo == NULL)
4790                 {
4791                   kfree(InquiryUnitSerialNumber);
4792                   InquiryUnitSerialNumber = NULL;
4793                   kfree(PhysicalDeviceInfo);
4794                   PhysicalDeviceInfo = NULL;
4795                 }
4796               DAC960_Critical("Physical Device %d:%d Now Exists%s\n",
4797                               Controller,
4798                               NewPhysicalDeviceInfo->Channel,
4799                               NewPhysicalDeviceInfo->TargetID,
4800                               (PhysicalDeviceInfo != NULL
4801                                ? "" : " - Allocation Failed"));
4802               if (PhysicalDeviceInfo != NULL)
4803                 {
4804                   memset(PhysicalDeviceInfo, 0,
4805                          sizeof(DAC960_V2_PhysicalDeviceInfo_T));
4806                   PhysicalDeviceInfo->PhysicalDeviceState =
4807                     DAC960_V2_Device_InvalidState;
4808                   memset(InquiryUnitSerialNumber, 0,
4809                          sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
4810                   InquiryUnitSerialNumber->PeripheralDeviceType = 0x1F;
4811                   for (DeviceIndex = DAC960_V2_MaxPhysicalDevices - 1;
4812                        DeviceIndex > PhysicalDeviceIndex;
4813                        DeviceIndex--)
4814                     {
4815                       Controller->V2.PhysicalDeviceInformation[DeviceIndex] =
4816                         Controller->V2.PhysicalDeviceInformation[DeviceIndex-1];
4817                       Controller->V2.InquiryUnitSerialNumber[DeviceIndex] =
4818                         Controller->V2.InquiryUnitSerialNumber[DeviceIndex-1];
4819                     }
4820                   Controller->V2.PhysicalDeviceInformation
4821                                  [PhysicalDeviceIndex] =
4822                     PhysicalDeviceInfo;
4823                   Controller->V2.InquiryUnitSerialNumber
4824                                  [PhysicalDeviceIndex] =
4825                     InquiryUnitSerialNumber;
4826                   Controller->V2.NeedDeviceSerialNumberInformation = true;
4827                 }
4828             }
4829           if (PhysicalDeviceInfo != NULL)
4830             {
4831               if (NewPhysicalDeviceInfo->PhysicalDeviceState !=
4832                   PhysicalDeviceInfo->PhysicalDeviceState)
4833                 DAC960_Critical(
4834                   "Physical Device %d:%d is now %s\n", Controller,
4835                   NewPhysicalDeviceInfo->Channel,
4836                   NewPhysicalDeviceInfo->TargetID,
4837                   (NewPhysicalDeviceInfo->PhysicalDeviceState
4838                    == DAC960_V2_Device_Online
4839                    ? "ONLINE"
4840                    : NewPhysicalDeviceInfo->PhysicalDeviceState
4841                      == DAC960_V2_Device_Rebuild
4842                      ? "REBUILD"
4843                      : NewPhysicalDeviceInfo->PhysicalDeviceState
4844                        == DAC960_V2_Device_Missing
4845                        ? "MISSING"
4846                        : NewPhysicalDeviceInfo->PhysicalDeviceState
4847                          == DAC960_V2_Device_Critical
4848                          ? "CRITICAL"
4849                          : NewPhysicalDeviceInfo->PhysicalDeviceState
4850                            == DAC960_V2_Device_Dead
4851                            ? "DEAD"
4852                            : NewPhysicalDeviceInfo->PhysicalDeviceState
4853                              == DAC960_V2_Device_SuspectedDead
4854                              ? "SUSPECTED-DEAD"
4855                              : NewPhysicalDeviceInfo->PhysicalDeviceState
4856                                == DAC960_V2_Device_CommandedOffline
4857                                ? "COMMANDED-OFFLINE"
4858                                : NewPhysicalDeviceInfo->PhysicalDeviceState
4859                                  == DAC960_V2_Device_Standby
4860                                  ? "STANDBY" : "UNKNOWN"));
4861               if ((NewPhysicalDeviceInfo->ParityErrors !=
4862                    PhysicalDeviceInfo->ParityErrors) ||
4863                   (NewPhysicalDeviceInfo->SoftErrors !=
4864                    PhysicalDeviceInfo->SoftErrors) ||
4865                   (NewPhysicalDeviceInfo->HardErrors !=
4866                    PhysicalDeviceInfo->HardErrors) ||
4867                   (NewPhysicalDeviceInfo->MiscellaneousErrors !=
4868                    PhysicalDeviceInfo->MiscellaneousErrors) ||
4869                   (NewPhysicalDeviceInfo->CommandTimeouts !=
4870                    PhysicalDeviceInfo->CommandTimeouts) ||
4871                   (NewPhysicalDeviceInfo->Retries !=
4872                    PhysicalDeviceInfo->Retries) ||
4873                   (NewPhysicalDeviceInfo->Aborts !=
4874                    PhysicalDeviceInfo->Aborts) ||
4875                   (NewPhysicalDeviceInfo->PredictedFailuresDetected !=
4876                    PhysicalDeviceInfo->PredictedFailuresDetected))
4877                 {
4878                   DAC960_Critical("Physical Device %d:%d Errors: "
4879                                   "Parity = %d, Soft = %d, "
4880                                   "Hard = %d, Misc = %d\n",
4881                                   Controller,
4882                                   NewPhysicalDeviceInfo->Channel,
4883                                   NewPhysicalDeviceInfo->TargetID,
4884                                   NewPhysicalDeviceInfo->ParityErrors,
4885                                   NewPhysicalDeviceInfo->SoftErrors,
4886                                   NewPhysicalDeviceInfo->HardErrors,
4887                                   NewPhysicalDeviceInfo->MiscellaneousErrors);
4888                   DAC960_Critical("Physical Device %d:%d Errors: "
4889                                   "Timeouts = %d, Retries = %d, "
4890                                   "Aborts = %d, Predicted = %d\n",
4891                                   Controller,
4892                                   NewPhysicalDeviceInfo->Channel,
4893                                   NewPhysicalDeviceInfo->TargetID,
4894                                   NewPhysicalDeviceInfo->CommandTimeouts,
4895                                   NewPhysicalDeviceInfo->Retries,
4896                                   NewPhysicalDeviceInfo->Aborts,
4897                                   NewPhysicalDeviceInfo
4898                                   ->PredictedFailuresDetected);
4899                 }
4900               if ((PhysicalDeviceInfo->PhysicalDeviceState
4901                    == DAC960_V2_Device_Dead ||
4902                    PhysicalDeviceInfo->PhysicalDeviceState
4903                    == DAC960_V2_Device_InvalidState) &&
4904                   NewPhysicalDeviceInfo->PhysicalDeviceState
4905                   != DAC960_V2_Device_Dead)
4906                 Controller->V2.NeedDeviceSerialNumberInformation = true;
4907               memcpy(PhysicalDeviceInfo, NewPhysicalDeviceInfo,
4908                      sizeof(DAC960_V2_PhysicalDeviceInfo_T));
4909             }
4910           NewPhysicalDeviceInfo->LogicalUnit++;
4911           Controller->V2.PhysicalDeviceIndex++;
4912         }
4913       else if (CommandOpcode == DAC960_V2_GetPhysicalDeviceInfoValid)
4914         {
4915           unsigned int DeviceIndex;
4916           for (DeviceIndex = Controller->V2.PhysicalDeviceIndex;
4917                DeviceIndex < DAC960_V2_MaxPhysicalDevices;
4918                DeviceIndex++)
4919             {
4920               DAC960_V2_PhysicalDeviceInfo_T *PhysicalDeviceInfo =
4921                 Controller->V2.PhysicalDeviceInformation[DeviceIndex];
4922               DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
4923                 Controller->V2.InquiryUnitSerialNumber[DeviceIndex];
4924               if (PhysicalDeviceInfo == NULL) break;
4925               DAC960_Critical("Physical Device %d:%d No Longer Exists\n",
4926                               Controller,
4927                               PhysicalDeviceInfo->Channel,
4928                               PhysicalDeviceInfo->TargetID);
4929               Controller->V2.PhysicalDeviceInformation[DeviceIndex] = NULL;
4930               Controller->V2.InquiryUnitSerialNumber[DeviceIndex] = NULL;
4931               kfree(PhysicalDeviceInfo);
4932               kfree(InquiryUnitSerialNumber);
4933             }
4934           Controller->V2.NeedPhysicalDeviceInformation = false;
4935         }
4936       else if (CommandOpcode == DAC960_V2_GetLogicalDeviceInfoValid &&
4937                CommandStatus == DAC960_V2_NormalCompletion)
4938         {
4939           DAC960_V2_LogicalDeviceInfo_T *NewLogicalDeviceInfo =
4940             Controller->V2.NewLogicalDeviceInformation;
4941           unsigned short LogicalDeviceNumber =
4942             NewLogicalDeviceInfo->LogicalDeviceNumber;
4943           DAC960_V2_LogicalDeviceInfo_T *LogicalDeviceInfo =
4944             Controller->V2.LogicalDeviceInformation[LogicalDeviceNumber];
4945           if (LogicalDeviceInfo == NULL)
4946             {
4947               DAC960_V2_PhysicalDevice_T PhysicalDevice;
4948               PhysicalDevice.Controller = 0;
4949               PhysicalDevice.Channel = NewLogicalDeviceInfo->Channel;
4950               PhysicalDevice.TargetID = NewLogicalDeviceInfo->TargetID;
4951               PhysicalDevice.LogicalUnit = NewLogicalDeviceInfo->LogicalUnit;
4952               Controller->V2.LogicalDriveToVirtualDevice[LogicalDeviceNumber] =
4953                 PhysicalDevice;
4954               LogicalDeviceInfo = (DAC960_V2_LogicalDeviceInfo_T *)
4955                 kmalloc(sizeof(DAC960_V2_LogicalDeviceInfo_T), GFP_ATOMIC);
4956               Controller->V2.LogicalDeviceInformation[LogicalDeviceNumber] =
4957                 LogicalDeviceInfo;
4958               DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) "
4959                               "Now Exists%s\n", Controller,
4960                               LogicalDeviceNumber,
4961                               Controller->ControllerNumber,
4962                               LogicalDeviceNumber,
4963                               (LogicalDeviceInfo != NULL
4964                                ? "" : " - Allocation Failed"));
4965               if (LogicalDeviceInfo != NULL)
4966                 {
4967                   memset(LogicalDeviceInfo, 0,
4968                          sizeof(DAC960_V2_LogicalDeviceInfo_T));
4969                   DAC960_ComputeGenericDiskInfo(Controller);
4970                 }
4971             }
4972           if (LogicalDeviceInfo != NULL)
4973             {
4974               unsigned long LogicalDeviceSize =
4975                 NewLogicalDeviceInfo->ConfigurableDeviceSize;
4976               if (NewLogicalDeviceInfo->LogicalDeviceState !=
4977                   LogicalDeviceInfo->LogicalDeviceState)
4978                 DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) "
4979                                 "is now %s\n", Controller,
4980                                 LogicalDeviceNumber,
4981                                 Controller->ControllerNumber,
4982                                 LogicalDeviceNumber,
4983                                 (NewLogicalDeviceInfo->LogicalDeviceState
4984                                  == DAC960_V2_LogicalDevice_Online
4985                                  ? "ONLINE"
4986                                  : NewLogicalDeviceInfo->LogicalDeviceState
4987                                    == DAC960_V2_LogicalDevice_Critical
4988                                    ? "CRITICAL" : "OFFLINE"));
4989               if ((NewLogicalDeviceInfo->SoftErrors !=
4990                    LogicalDeviceInfo->SoftErrors) ||
4991                   (NewLogicalDeviceInfo->CommandsFailed !=
4992                    LogicalDeviceInfo->CommandsFailed) ||
4993                   (NewLogicalDeviceInfo->DeferredWriteErrors !=
4994                    LogicalDeviceInfo->DeferredWriteErrors))
4995                 DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) Errors: "
4996                                 "Soft = %d, Failed = %d, Deferred Write = %d\n",
4997                                 Controller, LogicalDeviceNumber,
4998                                 Controller->ControllerNumber,
4999                                 LogicalDeviceNumber,
5000                                 NewLogicalDeviceInfo->SoftErrors,
5001                                 NewLogicalDeviceInfo->CommandsFailed,
5002                                 NewLogicalDeviceInfo->DeferredWriteErrors);
5003               if (NewLogicalDeviceInfo->ConsistencyCheckInProgress)
5004                 DAC960_V2_ReportProgress(Controller,
5005                                          "Consistency Check",
5006                                          LogicalDeviceNumber,
5007                                          NewLogicalDeviceInfo
5008                                          ->ConsistencyCheckBlockNumber,
5009                                          LogicalDeviceSize);
5010               else if (NewLogicalDeviceInfo->RebuildInProgress)
5011                 DAC960_V2_ReportProgress(Controller,
5012                                          "Rebuild",
5013                                          LogicalDeviceNumber,
5014                                          NewLogicalDeviceInfo
5015                                          ->RebuildBlockNumber,
5016                                          LogicalDeviceSize);
5017               else if (NewLogicalDeviceInfo->BackgroundInitializationInProgress)
5018                 DAC960_V2_ReportProgress(Controller,
5019                                          "Background Initialization",
5020                                          LogicalDeviceNumber,
5021                                          NewLogicalDeviceInfo
5022                                          ->BackgroundInitializationBlockNumber,
5023                                          LogicalDeviceSize);
5024               else if (NewLogicalDeviceInfo->ForegroundInitializationInProgress)
5025                 DAC960_V2_ReportProgress(Controller,
5026                                          "Foreground Initialization",
5027                                          LogicalDeviceNumber,
5028                                          NewLogicalDeviceInfo
5029                                          ->ForegroundInitializationBlockNumber,
5030                                          LogicalDeviceSize);
5031               else if (NewLogicalDeviceInfo->DataMigrationInProgress)
5032                 DAC960_V2_ReportProgress(Controller,
5033                                          "Data Migration",
5034                                          LogicalDeviceNumber,
5035                                          NewLogicalDeviceInfo
5036                                          ->DataMigrationBlockNumber,
5037                                          LogicalDeviceSize);
5038               else if (NewLogicalDeviceInfo->PatrolOperationInProgress)
5039                 DAC960_V2_ReportProgress(Controller,
5040                                          "Patrol Operation",
5041                                          LogicalDeviceNumber,
5042                                          NewLogicalDeviceInfo
5043                                          ->PatrolOperationBlockNumber,
5044                                          LogicalDeviceSize);
5045               if (LogicalDeviceInfo->BackgroundInitializationInProgress &&
5046                   !NewLogicalDeviceInfo->BackgroundInitializationInProgress)
5047                 DAC960_Progress("Logical Drive %d (/dev/rd/c%dd%d) "
5048                                 "Background Initialization %s\n",
5049                                 Controller,
5050                                 LogicalDeviceNumber,
5051                                 Controller->ControllerNumber,
5052                                 LogicalDeviceNumber,
5053                                 (NewLogicalDeviceInfo->LogicalDeviceControl
5054                                                       .LogicalDeviceInitialized
5055                                  ? "Completed" : "Failed"));
5056               memcpy(LogicalDeviceInfo, NewLogicalDeviceInfo,
5057                      sizeof(DAC960_V2_LogicalDeviceInfo_T));
5058             }
5059           Controller->V2.LogicalDriveFoundDuringScan
5060                          [LogicalDeviceNumber] = true;
5061           NewLogicalDeviceInfo->LogicalDeviceNumber++;
5062         }
5063       else if (CommandOpcode == DAC960_V2_GetLogicalDeviceInfoValid)
5064         {
5065           int LogicalDriveNumber;
5066           for (LogicalDriveNumber = 0;
5067                LogicalDriveNumber < DAC960_MaxLogicalDrives;
5068                LogicalDriveNumber++)
5069             {
5070               DAC960_V2_LogicalDeviceInfo_T *LogicalDeviceInfo =
5071                 Controller->V2.LogicalDeviceInformation[LogicalDriveNumber];
5072               if (LogicalDeviceInfo == NULL ||
5073                   Controller->V2.LogicalDriveFoundDuringScan
5074                                  [LogicalDriveNumber])
5075                 continue;
5076               DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) "
5077                               "No Longer Exists\n", Controller,
5078                               LogicalDriveNumber,
5079                               Controller->ControllerNumber,
5080                               LogicalDriveNumber);
5081               Controller->V2.LogicalDeviceInformation
5082                              [LogicalDriveNumber] = NULL;
5083               kfree(LogicalDeviceInfo);
5084               Controller->LogicalDriveInitiallyAccessible
5085                           [LogicalDriveNumber] = false;
5086               DAC960_ComputeGenericDiskInfo(Controller);
5087             }
5088           Controller->V2.NeedLogicalDeviceInformation = false;
5089         }
5090       else if (CommandOpcode == DAC960_V2_SCSI_10_Passthru)
5091         {
5092             DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
5093                 Controller->V2.InquiryUnitSerialNumber[Controller->V2.PhysicalDeviceIndex - 1];
5094
5095             if (CommandStatus != DAC960_V2_NormalCompletion) {
5096                 memset(InquiryUnitSerialNumber,
5097                         0, sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
5098                 InquiryUnitSerialNumber->PeripheralDeviceType = 0x1F;
5099             } else
5100                 memcpy(InquiryUnitSerialNumber,
5101                         Controller->V2.NewInquiryUnitSerialNumber,
5102                         sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
5103
5104              Controller->V2.NeedDeviceSerialNumberInformation = false;
5105         }
5106
5107       if (Controller->V2.HealthStatusBuffer->NextEventSequenceNumber
5108           - Controller->V2.NextEventSequenceNumber > 0)
5109         {
5110           CommandMailbox->GetEvent.CommandOpcode = DAC960_V2_IOCTL;
5111           CommandMailbox->GetEvent.DataTransferSize = sizeof(DAC960_V2_Event_T);
5112           CommandMailbox->GetEvent.EventSequenceNumberHigh16 =
5113             Controller->V2.NextEventSequenceNumber >> 16;
5114           CommandMailbox->GetEvent.ControllerNumber = 0;
5115           CommandMailbox->GetEvent.IOCTL_Opcode =
5116             DAC960_V2_GetEvent;
5117           CommandMailbox->GetEvent.EventSequenceNumberLow16 =
5118             Controller->V2.NextEventSequenceNumber & 0xFFFF;
5119           CommandMailbox->GetEvent.DataTransferMemoryAddress
5120                                   .ScatterGatherSegments[0]
5121                                   .SegmentDataPointer =
5122             Controller->V2.EventDMA;
5123           CommandMailbox->GetEvent.DataTransferMemoryAddress
5124                                   .ScatterGatherSegments[0]
5125                                   .SegmentByteCount =
5126             CommandMailbox->GetEvent.DataTransferSize;
5127           DAC960_QueueCommand(Command);
5128           return;
5129         }
5130       if (Controller->V2.NeedPhysicalDeviceInformation)
5131         {
5132           if (Controller->V2.NeedDeviceSerialNumberInformation)
5133             {
5134               DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
5135                 Controller->V2.NewInquiryUnitSerialNumber;
5136               InquiryUnitSerialNumber->PeripheralDeviceType = 0x1F;
5137
5138               DAC960_V2_ConstructNewUnitSerialNumber(Controller, CommandMailbox,
5139                         Controller->V2.NewPhysicalDeviceInformation->Channel,
5140                         Controller->V2.NewPhysicalDeviceInformation->TargetID,
5141                 Controller->V2.NewPhysicalDeviceInformation->LogicalUnit - 1);
5142
5143
5144               DAC960_QueueCommand(Command);
5145               return;
5146             }
5147           if (Controller->V2.StartPhysicalDeviceInformationScan)
5148             {
5149               Controller->V2.PhysicalDeviceIndex = 0;
5150               Controller->V2.NewPhysicalDeviceInformation->Channel = 0;
5151               Controller->V2.NewPhysicalDeviceInformation->TargetID = 0;
5152               Controller->V2.NewPhysicalDeviceInformation->LogicalUnit = 0;
5153               Controller->V2.StartPhysicalDeviceInformationScan = false;
5154             }
5155           CommandMailbox->PhysicalDeviceInfo.CommandOpcode = DAC960_V2_IOCTL;
5156           CommandMailbox->PhysicalDeviceInfo.DataTransferSize =
5157             sizeof(DAC960_V2_PhysicalDeviceInfo_T);
5158           CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.LogicalUnit =
5159             Controller->V2.NewPhysicalDeviceInformation->LogicalUnit;
5160           CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.TargetID =
5161             Controller->V2.NewPhysicalDeviceInformation->TargetID;
5162           CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.Channel =
5163             Controller->V2.NewPhysicalDeviceInformation->Channel;
5164           CommandMailbox->PhysicalDeviceInfo.IOCTL_Opcode =
5165             DAC960_V2_GetPhysicalDeviceInfoValid;
5166           CommandMailbox->PhysicalDeviceInfo.DataTransferMemoryAddress
5167                                             .ScatterGatherSegments[0]
5168                                             .SegmentDataPointer =
5169             Controller->V2.NewPhysicalDeviceInformationDMA;
5170           CommandMailbox->PhysicalDeviceInfo.DataTransferMemoryAddress
5171                                             .ScatterGatherSegments[0]
5172                                             .SegmentByteCount =
5173             CommandMailbox->PhysicalDeviceInfo.DataTransferSize;
5174           DAC960_QueueCommand(Command);
5175           return;
5176         }
5177       if (Controller->V2.NeedLogicalDeviceInformation)
5178         {
5179           if (Controller->V2.StartLogicalDeviceInformationScan)
5180             {
5181               int LogicalDriveNumber;
5182               for (LogicalDriveNumber = 0;
5183                    LogicalDriveNumber < DAC960_MaxLogicalDrives;
5184                    LogicalDriveNumber++)
5185                 Controller->V2.LogicalDriveFoundDuringScan
5186                                [LogicalDriveNumber] = false;
5187               Controller->V2.NewLogicalDeviceInformation->LogicalDeviceNumber = 0;
5188               Controller->V2.StartLogicalDeviceInformationScan = false;
5189             }
5190           CommandMailbox->LogicalDeviceInfo.CommandOpcode = DAC960_V2_IOCTL;
5191           CommandMailbox->LogicalDeviceInfo.DataTransferSize =
5192             sizeof(DAC960_V2_LogicalDeviceInfo_T);
5193           CommandMailbox->LogicalDeviceInfo.LogicalDevice.LogicalDeviceNumber =
5194             Controller->V2.NewLogicalDeviceInformation->LogicalDeviceNumber;
5195           CommandMailbox->LogicalDeviceInfo.IOCTL_Opcode =
5196             DAC960_V2_GetLogicalDeviceInfoValid;
5197           CommandMailbox->LogicalDeviceInfo.DataTransferMemoryAddress
5198                                            .ScatterGatherSegments[0]
5199                                            .SegmentDataPointer =
5200             Controller->V2.NewLogicalDeviceInformationDMA;
5201           CommandMailbox->LogicalDeviceInfo.DataTransferMemoryAddress
5202                                            .ScatterGatherSegments[0]
5203                                            .SegmentByteCount =
5204             CommandMailbox->LogicalDeviceInfo.DataTransferSize;
5205           DAC960_QueueCommand(Command);
5206           return;
5207         }
5208       Controller->MonitoringTimerCount++;
5209       Controller->MonitoringTimer.expires =
5210         jiffies + DAC960_HealthStatusMonitoringInterval;
5211         add_timer(&Controller->MonitoringTimer);
5212     }
5213   if (CommandType == DAC960_ImmediateCommand)
5214     {
5215       complete(Command->Completion);
5216       Command->Completion = NULL;
5217       return;
5218     }
5219   if (CommandType == DAC960_QueuedCommand)
5220     {
5221       DAC960_V2_KernelCommand_T *KernelCommand = Command->V2.KernelCommand;
5222       KernelCommand->CommandStatus = CommandStatus;
5223       KernelCommand->RequestSenseLength = Command->V2.RequestSenseLength;
5224       KernelCommand->DataTransferLength = Command->V2.DataTransferResidue;
5225       Command->V2.KernelCommand = NULL;
5226       DAC960_DeallocateCommand(Command);
5227       KernelCommand->CompletionFunction(KernelCommand);
5228       return;
5229     }
5230   /*
5231     Queue a Status Monitoring Command to the Controller using the just
5232     completed Command if one was deferred previously due to lack of a
5233     free Command when the Monitoring Timer Function was called.
5234   */
5235   if (Controller->MonitoringCommandDeferred)
5236     {
5237       Controller->MonitoringCommandDeferred = false;
5238       DAC960_V2_QueueMonitoringCommand(Command);
5239       return;
5240     }
5241   /*
5242     Deallocate the Command.
5243   */
5244   DAC960_DeallocateCommand(Command);
5245   /*
5246     Wake up any processes waiting on a free Command.
5247   */
5248   wake_up(&Controller->CommandWaitQueue);
5249 }
5250
5251 /*
5252   DAC960_GEM_InterruptHandler handles hardware interrupts from DAC960 GEM Series
5253   Controllers.
5254 */
5255
5256 static irqreturn_t DAC960_GEM_InterruptHandler(int IRQ_Channel,
5257                                        void *DeviceIdentifier,
5258                                        struct pt_regs *InterruptRegisters)
5259 {
5260   DAC960_Controller_T *Controller = (DAC960_Controller_T *) DeviceIdentifier;
5261   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
5262   DAC960_V2_StatusMailbox_T *NextStatusMailbox;
5263   unsigned long flags;
5264
5265   spin_lock_irqsave(&Controller->queue_lock, flags);
5266   DAC960_GEM_AcknowledgeInterrupt(ControllerBaseAddress);
5267   NextStatusMailbox = Controller->V2.NextStatusMailbox;
5268   while (NextStatusMailbox->Fields.CommandIdentifier > 0)
5269     {
5270        DAC960_V2_CommandIdentifier_T CommandIdentifier =
5271            NextStatusMailbox->Fields.CommandIdentifier;
5272        DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1];
5273        Command->V2.CommandStatus = NextStatusMailbox->Fields.CommandStatus;
5274        Command->V2.RequestSenseLength =
5275            NextStatusMailbox->Fields.RequestSenseLength;
5276        Command->V2.DataTransferResidue =
5277            NextStatusMailbox->Fields.DataTransferResidue;
5278        NextStatusMailbox->Words[0] = 0;
5279        if (++NextStatusMailbox > Controller->V2.LastStatusMailbox)
5280            NextStatusMailbox = Controller->V2.FirstStatusMailbox;
5281        DAC960_V2_ProcessCompletedCommand(Command);
5282     }
5283   Controller->V2.NextStatusMailbox = NextStatusMailbox;
5284   /*
5285     Attempt to remove additional I/O Requests from the Controller's
5286     I/O Request Queue and queue them to the Controller.
5287   */
5288   DAC960_ProcessRequest(Controller);
5289   spin_unlock_irqrestore(&Controller->queue_lock, flags);
5290   return IRQ_HANDLED;
5291 }
5292
5293 /*
5294   DAC960_BA_InterruptHandler handles hardware interrupts from DAC960 BA Series
5295   Controllers.
5296 */
5297
5298 static irqreturn_t DAC960_BA_InterruptHandler(int IRQ_Channel,
5299                                        void *DeviceIdentifier,
5300                                        struct pt_regs *InterruptRegisters)
5301 {
5302   DAC960_Controller_T *Controller = (DAC960_Controller_T *) DeviceIdentifier;
5303   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
5304   DAC960_V2_StatusMailbox_T *NextStatusMailbox;
5305   unsigned long flags;
5306
5307   spin_lock_irqsave(&Controller->queue_lock, flags);
5308   DAC960_BA_AcknowledgeInterrupt(ControllerBaseAddress);
5309   NextStatusMailbox = Controller->V2.NextStatusMailbox;
5310   while (NextStatusMailbox->Fields.CommandIdentifier > 0)
5311     {
5312       DAC960_V2_CommandIdentifier_T CommandIdentifier =
5313         NextStatusMailbox->Fields.CommandIdentifier;
5314       DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1];
5315       Command->V2.CommandStatus = NextStatusMailbox->Fields.CommandStatus;
5316       Command->V2.RequestSenseLength =
5317         NextStatusMailbox->Fields.RequestSenseLength;
5318       Command->V2.DataTransferResidue =
5319         NextStatusMailbox->Fields.DataTransferResidue;
5320       NextStatusMailbox->Words[0] = 0;
5321       if (++NextStatusMailbox > Controller->V2.LastStatusMailbox)
5322         NextStatusMailbox = Controller->V2.FirstStatusMailbox;
5323       DAC960_V2_ProcessCompletedCommand(Command);
5324     }
5325   Controller->V2.NextStatusMailbox = NextStatusMailbox;
5326   /*
5327     Attempt to remove additional I/O Requests from the Controller's
5328     I/O Request Queue and queue them to the Controller.
5329   */
5330   DAC960_ProcessRequest(Controller);
5331   spin_unlock_irqrestore(&Controller->queue_lock, flags);
5332   return IRQ_HANDLED;
5333 }
5334
5335
5336 /*
5337   DAC960_LP_InterruptHandler handles hardware interrupts from DAC960 LP Series
5338   Controllers.
5339 */
5340
5341 static irqreturn_t DAC960_LP_InterruptHandler(int IRQ_Channel,
5342                                        void *DeviceIdentifier,
5343                                        struct pt_regs *InterruptRegisters)
5344 {
5345   DAC960_Controller_T *Controller = (DAC960_Controller_T *) DeviceIdentifier;
5346   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
5347   DAC960_V2_StatusMailbox_T *NextStatusMailbox;
5348   unsigned long flags;
5349
5350   spin_lock_irqsave(&Controller->queue_lock, flags);
5351   DAC960_LP_AcknowledgeInterrupt(ControllerBaseAddress);
5352   NextStatusMailbox = Controller->V2.NextStatusMailbox;
5353   while (NextStatusMailbox->Fields.CommandIdentifier > 0)
5354     {
5355       DAC960_V2_CommandIdentifier_T CommandIdentifier =
5356         NextStatusMailbox->Fields.CommandIdentifier;
5357       DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1];
5358       Command->V2.CommandStatus = NextStatusMailbox->Fields.CommandStatus;
5359       Command->V2.RequestSenseLength =
5360         NextStatusMailbox->Fields.RequestSenseLength;
5361       Command->V2.DataTransferResidue =
5362         NextStatusMailbox->Fields.DataTransferResidue;
5363       NextStatusMailbox->Words[0] = 0;
5364       if (++NextStatusMailbox > Controller->V2.LastStatusMailbox)
5365         NextStatusMailbox = Controller->V2.FirstStatusMailbox;
5366       DAC960_V2_ProcessCompletedCommand(Command);
5367     }
5368   Controller->V2.NextStatusMailbox = NextStatusMailbox;
5369   /*
5370     Attempt to remove additional I/O Requests from the Controller's
5371     I/O Request Queue and queue them to the Controller.
5372   */
5373   DAC960_ProcessRequest(Controller);
5374   spin_unlock_irqrestore(&Controller->queue_lock, flags);
5375   return IRQ_HANDLED;
5376 }
5377
5378
5379 /*
5380   DAC960_LA_InterruptHandler handles hardware interrupts from DAC960 LA Series
5381   Controllers.
5382 */
5383
5384 static irqreturn_t DAC960_LA_InterruptHandler(int IRQ_Channel,
5385                                        void *DeviceIdentifier,
5386                                        struct pt_regs *InterruptRegisters)
5387 {
5388   DAC960_Controller_T *Controller = (DAC960_Controller_T *) DeviceIdentifier;
5389   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
5390   DAC960_V1_StatusMailbox_T *NextStatusMailbox;
5391   unsigned long flags;
5392
5393   spin_lock_irqsave(&Controller->queue_lock, flags);
5394   DAC960_LA_AcknowledgeInterrupt(ControllerBaseAddress);
5395   NextStatusMailbox = Controller->V1.NextStatusMailbox;
5396   while (NextStatusMailbox->Fields.Valid)
5397     {
5398       DAC960_V1_CommandIdentifier_T CommandIdentifier =
5399         NextStatusMailbox->Fields.CommandIdentifier;
5400       DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1];
5401       Command->V1.CommandStatus = NextStatusMailbox->Fields.CommandStatus;
5402       NextStatusMailbox->Word = 0;
5403       if (++NextStatusMailbox > Controller->V1.LastStatusMailbox)
5404         NextStatusMailbox = Controller->V1.FirstStatusMailbox;
5405       DAC960_V1_ProcessCompletedCommand(Command);
5406     }
5407   Controller->V1.NextStatusMailbox = NextStatusMailbox;
5408   /*
5409     Attempt to remove additional I/O Requests from the Controller's
5410     I/O Request Queue and queue them to the Controller.
5411   */
5412   DAC960_ProcessRequest(Controller);
5413   spin_unlock_irqrestore(&Controller->queue_lock, flags);
5414   return IRQ_HANDLED;
5415 }
5416
5417
5418 /*
5419   DAC960_PG_InterruptHandler handles hardware interrupts from DAC960 PG Series
5420   Controllers.
5421 */
5422
5423 static irqreturn_t DAC960_PG_InterruptHandler(int IRQ_Channel,
5424                                        void *DeviceIdentifier,
5425                                        struct pt_regs *InterruptRegisters)
5426 {
5427   DAC960_Controller_T *Controller = (DAC960_Controller_T *) DeviceIdentifier;
5428   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
5429   DAC960_V1_StatusMailbox_T *NextStatusMailbox;
5430   unsigned long flags;
5431
5432   spin_lock_irqsave(&Controller->queue_lock, flags);
5433   DAC960_PG_AcknowledgeInterrupt(ControllerBaseAddress);
5434   NextStatusMailbox = Controller->V1.NextStatusMailbox;
5435   while (NextStatusMailbox->Fields.Valid)
5436     {
5437       DAC960_V1_CommandIdentifier_T CommandIdentifier =
5438         NextStatusMailbox->Fields.CommandIdentifier;
5439       DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1];
5440       Command->V1.CommandStatus = NextStatusMailbox->Fields.CommandStatus;
5441       NextStatusMailbox->Word = 0;
5442       if (++NextStatusMailbox > Controller->V1.LastStatusMailbox)
5443         NextStatusMailbox = Controller->V1.FirstStatusMailbox;
5444       DAC960_V1_ProcessCompletedCommand(Command);
5445     }
5446   Controller->V1.NextStatusMailbox = NextStatusMailbox;
5447   /*
5448     Attempt to remove additional I/O Requests from the Controller's
5449     I/O Request Queue and queue them to the Controller.
5450   */
5451   DAC960_ProcessRequest(Controller);
5452   spin_unlock_irqrestore(&Controller->queue_lock, flags);
5453   return IRQ_HANDLED;
5454 }
5455
5456
5457 /*
5458   DAC960_PD_InterruptHandler handles hardware interrupts from DAC960 PD Series
5459   Controllers.
5460 */
5461
5462 static irqreturn_t DAC960_PD_InterruptHandler(int IRQ_Channel,
5463                                        void *DeviceIdentifier,
5464                                        struct pt_regs *InterruptRegisters)
5465 {
5466   DAC960_Controller_T *Controller = (DAC960_Controller_T *) DeviceIdentifier;
5467   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
5468   unsigned long flags;
5469
5470   spin_lock_irqsave(&Controller->queue_lock, flags);
5471   while (DAC960_PD_StatusAvailableP(ControllerBaseAddress))
5472     {
5473       DAC960_V1_CommandIdentifier_T CommandIdentifier =
5474         DAC960_PD_ReadStatusCommandIdentifier(ControllerBaseAddress);
5475       DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1];
5476       Command->V1.CommandStatus =
5477         DAC960_PD_ReadStatusRegister(ControllerBaseAddress);
5478       DAC960_PD_AcknowledgeInterrupt(ControllerBaseAddress);
5479       DAC960_PD_AcknowledgeStatus(ControllerBaseAddress);
5480       DAC960_V1_ProcessCompletedCommand(Command);
5481     }
5482   /*
5483     Attempt to remove additional I/O Requests from the Controller's
5484     I/O Request Queue and queue them to the Controller.
5485   */
5486   DAC960_ProcessRequest(Controller);
5487   spin_unlock_irqrestore(&Controller->queue_lock, flags);
5488   return IRQ_HANDLED;
5489 }
5490
5491
5492 /*
5493   DAC960_P_InterruptHandler handles hardware interrupts from DAC960 P Series
5494   Controllers.
5495
5496   Translations of DAC960_V1_Enquiry and DAC960_V1_GetDeviceState rely
5497   on the data having been placed into DAC960_Controller_T, rather than
5498   an arbitrary buffer.
5499 */
5500
5501 static irqreturn_t DAC960_P_InterruptHandler(int IRQ_Channel,
5502                                       void *DeviceIdentifier,
5503                                       struct pt_regs *InterruptRegisters)
5504 {
5505   DAC960_Controller_T *Controller = (DAC960_Controller_T *) DeviceIdentifier;
5506   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
5507   unsigned long flags;
5508
5509   spin_lock_irqsave(&Controller->queue_lock, flags);
5510   while (DAC960_PD_StatusAvailableP(ControllerBaseAddress))
5511     {
5512       DAC960_V1_CommandIdentifier_T CommandIdentifier =
5513         DAC960_PD_ReadStatusCommandIdentifier(ControllerBaseAddress);
5514       DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1];
5515       DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
5516       DAC960_V1_CommandOpcode_T CommandOpcode =
5517         CommandMailbox->Common.CommandOpcode;
5518       Command->V1.CommandStatus =
5519         DAC960_PD_ReadStatusRegister(ControllerBaseAddress);
5520       DAC960_PD_AcknowledgeInterrupt(ControllerBaseAddress);
5521       DAC960_PD_AcknowledgeStatus(ControllerBaseAddress);
5522       switch (CommandOpcode)
5523         {
5524         case DAC960_V1_Enquiry_Old:
5525           Command->V1.CommandMailbox.Common.CommandOpcode = DAC960_V1_Enquiry;
5526           DAC960_P_To_PD_TranslateEnquiry(Controller->V1.NewEnquiry);
5527           break;
5528         case DAC960_V1_GetDeviceState_Old:
5529           Command->V1.CommandMailbox.Common.CommandOpcode =
5530                                                 DAC960_V1_GetDeviceState;
5531           DAC960_P_To_PD_TranslateDeviceState(Controller->V1.NewDeviceState);
5532           break;
5533         case DAC960_V1_Read_Old:
5534           Command->V1.CommandMailbox.Common.CommandOpcode = DAC960_V1_Read;
5535           DAC960_P_To_PD_TranslateReadWriteCommand(CommandMailbox);
5536           break;
5537         case DAC960_V1_Write_Old:
5538           Command->V1.CommandMailbox.Common.CommandOpcode = DAC960_V1_Write;
5539           DAC960_P_To_PD_TranslateReadWriteCommand(CommandMailbox);
5540           break;
5541         case DAC960_V1_ReadWithScatterGather_Old:
5542           Command->V1.CommandMailbox.Common.CommandOpcode =
5543             DAC960_V1_ReadWithScatterGather;
5544           DAC960_P_To_PD_TranslateReadWriteCommand(CommandMailbox);
5545           break;
5546         case DAC960_V1_WriteWithScatterGather_Old:
5547           Command->V1.CommandMailbox.Common.CommandOpcode =
5548             DAC960_V1_WriteWithScatterGather;
5549           DAC960_P_To_PD_TranslateReadWriteCommand(CommandMailbox);
5550           break;
5551         default:
5552           break;
5553         }
5554       DAC960_V1_ProcessCompletedCommand(Command);
5555     }
5556   /*
5557     Attempt to remove additional I/O Requests from the Controller's
5558     I/O Request Queue and queue them to the Controller.
5559   */
5560   DAC960_ProcessRequest(Controller);
5561   spin_unlock_irqrestore(&Controller->queue_lock, flags);
5562   return IRQ_HANDLED;
5563 }
5564
5565
5566 /*
5567   DAC960_V1_QueueMonitoringCommand queues a Monitoring Command to DAC960 V1
5568   Firmware Controllers.
5569 */
5570
5571 static void DAC960_V1_QueueMonitoringCommand(DAC960_Command_T *Command)
5572 {
5573   DAC960_Controller_T *Controller = Command->Controller;
5574   DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
5575   DAC960_V1_ClearCommand(Command);
5576   Command->CommandType = DAC960_MonitoringCommand;
5577   CommandMailbox->Type3.CommandOpcode = DAC960_V1_Enquiry;
5578   CommandMailbox->Type3.BusAddress = Controller->V1.NewEnquiryDMA;
5579   DAC960_QueueCommand(Command);
5580 }
5581
5582
5583 /*
5584   DAC960_V2_QueueMonitoringCommand queues a Monitoring Command to DAC960 V2
5585   Firmware Controllers.
5586 */
5587
5588 static void DAC960_V2_QueueMonitoringCommand(DAC960_Command_T *Command)
5589 {
5590   DAC960_Controller_T *Controller = Command->Controller;
5591   DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
5592   DAC960_V2_ClearCommand(Command);
5593   Command->CommandType = DAC960_MonitoringCommand;
5594   CommandMailbox->ControllerInfo.CommandOpcode = DAC960_V2_IOCTL;
5595   CommandMailbox->ControllerInfo.CommandControlBits
5596                                 .DataTransferControllerToHost = true;
5597   CommandMailbox->ControllerInfo.CommandControlBits
5598                                 .NoAutoRequestSense = true;
5599   CommandMailbox->ControllerInfo.DataTransferSize =
5600     sizeof(DAC960_V2_ControllerInfo_T);
5601   CommandMailbox->ControllerInfo.ControllerNumber = 0;
5602   CommandMailbox->ControllerInfo.IOCTL_Opcode = DAC960_V2_GetControllerInfo;
5603   CommandMailbox->ControllerInfo.DataTransferMemoryAddress
5604                                 .ScatterGatherSegments[0]
5605                                 .SegmentDataPointer =
5606     Controller->V2.NewControllerInformationDMA;
5607   CommandMailbox->ControllerInfo.DataTransferMemoryAddress
5608                                 .ScatterGatherSegments[0]
5609                                 .SegmentByteCount =
5610     CommandMailbox->ControllerInfo.DataTransferSize;
5611   DAC960_QueueCommand(Command);
5612 }
5613
5614
5615 /*
5616   DAC960_MonitoringTimerFunction is the timer function for monitoring
5617   the status of DAC960 Controllers.
5618 */
5619
5620 static void DAC960_MonitoringTimerFunction(unsigned long TimerData)
5621 {
5622   DAC960_Controller_T *Controller = (DAC960_Controller_T *) TimerData;
5623   DAC960_Command_T *Command;
5624   unsigned long flags;
5625
5626   if (Controller->FirmwareType == DAC960_V1_Controller)
5627     {
5628       spin_lock_irqsave(&Controller->queue_lock, flags);
5629       /*
5630         Queue a Status Monitoring Command to Controller.
5631       */
5632       Command = DAC960_AllocateCommand(Controller);
5633       if (Command != NULL)
5634         DAC960_V1_QueueMonitoringCommand(Command);
5635       else Controller->MonitoringCommandDeferred = true;
5636       spin_unlock_irqrestore(&Controller->queue_lock, flags);
5637     }
5638   else
5639     {
5640       DAC960_V2_ControllerInfo_T *ControllerInfo =
5641         &Controller->V2.ControllerInformation;
5642       unsigned int StatusChangeCounter =
5643         Controller->V2.HealthStatusBuffer->StatusChangeCounter;
5644       boolean ForceMonitoringCommand = false;
5645       if (time_after(jiffies, Controller->SecondaryMonitoringTime
5646           + DAC960_SecondaryMonitoringInterval))
5647         {
5648           int LogicalDriveNumber;
5649           for (LogicalDriveNumber = 0;
5650                LogicalDriveNumber < DAC960_MaxLogicalDrives;
5651                LogicalDriveNumber++)
5652             {
5653               DAC960_V2_LogicalDeviceInfo_T *LogicalDeviceInfo =
5654                 Controller->V2.LogicalDeviceInformation[LogicalDriveNumber];
5655               if (LogicalDeviceInfo == NULL) continue;
5656               if (!LogicalDeviceInfo->LogicalDeviceControl
5657                                      .LogicalDeviceInitialized)
5658                 {
5659                   ForceMonitoringCommand = true;
5660                   break;
5661                 }
5662             }
5663           Controller->SecondaryMonitoringTime = jiffies;
5664         }
5665       if (StatusChangeCounter == Controller->V2.StatusChangeCounter &&
5666           Controller->V2.HealthStatusBuffer->NextEventSequenceNumber
5667           == Controller->V2.NextEventSequenceNumber &&
5668           (ControllerInfo->BackgroundInitializationsActive +
5669            ControllerInfo->LogicalDeviceInitializationsActive +
5670            ControllerInfo->PhysicalDeviceInitializationsActive +
5671            ControllerInfo->ConsistencyChecksActive +
5672            ControllerInfo->RebuildsActive +
5673            ControllerInfo->OnlineExpansionsActive == 0 ||
5674            time_before(jiffies, Controller->PrimaryMonitoringTime
5675            + DAC960_MonitoringTimerInterval)) &&
5676           !ForceMonitoringCommand)
5677         {
5678           Controller->MonitoringTimer.expires =
5679             jiffies + DAC960_HealthStatusMonitoringInterval;
5680             add_timer(&Controller->MonitoringTimer);
5681           return;
5682         }
5683       Controller->V2.StatusChangeCounter = StatusChangeCounter;
5684       Controller->PrimaryMonitoringTime = jiffies;
5685
5686       spin_lock_irqsave(&Controller->queue_lock, flags);
5687       /*
5688         Queue a Status Monitoring Command to Controller.
5689       */
5690       Command = DAC960_AllocateCommand(Controller);
5691       if (Command != NULL)
5692         DAC960_V2_QueueMonitoringCommand(Command);
5693       else Controller->MonitoringCommandDeferred = true;
5694       spin_unlock_irqrestore(&Controller->queue_lock, flags);
5695       /*
5696         Wake up any processes waiting on a Health Status Buffer change.
5697       */
5698       wake_up(&Controller->HealthStatusWaitQueue);
5699     }
5700 }
5701
5702 /*
5703   DAC960_CheckStatusBuffer verifies that there is room to hold ByteCount
5704   additional bytes in the Combined Status Buffer and grows the buffer if
5705   necessary.  It returns true if there is enough room and false otherwise.
5706 */
5707
5708 static boolean DAC960_CheckStatusBuffer(DAC960_Controller_T *Controller,
5709                                         unsigned int ByteCount)
5710 {
5711   unsigned char *NewStatusBuffer;
5712   if (Controller->InitialStatusLength + 1 +
5713       Controller->CurrentStatusLength + ByteCount + 1 <=
5714       Controller->CombinedStatusBufferLength)
5715     return true;
5716   if (Controller->CombinedStatusBufferLength == 0)
5717     {
5718       unsigned int NewStatusBufferLength = DAC960_InitialStatusBufferSize;
5719       while (NewStatusBufferLength < ByteCount)
5720         NewStatusBufferLength *= 2;
5721       Controller->CombinedStatusBuffer =
5722         (unsigned char *) kmalloc(NewStatusBufferLength, GFP_ATOMIC);
5723       if (Controller->CombinedStatusBuffer == NULL) return false;
5724       Controller->CombinedStatusBufferLength = NewStatusBufferLength;
5725       return true;
5726     }
5727   NewStatusBuffer = (unsigned char *)
5728     kmalloc(2 * Controller->CombinedStatusBufferLength, GFP_ATOMIC);
5729   if (NewStatusBuffer == NULL)
5730     {
5731       DAC960_Warning("Unable to expand Combined Status Buffer - Truncating\n",
5732                      Controller);
5733       return false;
5734     }
5735   memcpy(NewStatusBuffer, Controller->CombinedStatusBuffer,
5736          Controller->CombinedStatusBufferLength);
5737   kfree(Controller->CombinedStatusBuffer);
5738   Controller->CombinedStatusBuffer = NewStatusBuffer;
5739   Controller->CombinedStatusBufferLength *= 2;
5740   Controller->CurrentStatusBuffer =
5741     &NewStatusBuffer[Controller->InitialStatusLength + 1];
5742   return true;
5743 }
5744
5745
5746 /*
5747   DAC960_Message prints Driver Messages.
5748 */
5749
5750 static void DAC960_Message(DAC960_MessageLevel_T MessageLevel,
5751                            unsigned char *Format,
5752                            DAC960_Controller_T *Controller,
5753                            ...)
5754 {
5755   static unsigned char Buffer[DAC960_LineBufferSize];
5756   static boolean BeginningOfLine = true;
5757   va_list Arguments;
5758   int Length = 0;
5759   va_start(Arguments, Controller);
5760   Length = vsprintf(Buffer, Format, Arguments);
5761   va_end(Arguments);
5762   if (Controller == NULL)
5763     printk("%sDAC960#%d: %s", DAC960_MessageLevelMap[MessageLevel],
5764            DAC960_ControllerCount, Buffer);
5765   else if (MessageLevel == DAC960_AnnounceLevel ||
5766            MessageLevel == DAC960_InfoLevel)
5767     {
5768       if (!Controller->ControllerInitialized)
5769         {
5770           if (DAC960_CheckStatusBuffer(Controller, Length))
5771             {
5772               strcpy(&Controller->CombinedStatusBuffer
5773                                   [Controller->InitialStatusLength],
5774                      Buffer);
5775               Controller->InitialStatusLength += Length;
5776               Controller->CurrentStatusBuffer =
5777                 &Controller->CombinedStatusBuffer
5778                              [Controller->InitialStatusLength + 1];
5779             }
5780           if (MessageLevel == DAC960_AnnounceLevel)
5781             {
5782               static int AnnouncementLines = 0;
5783               if (++AnnouncementLines <= 2)
5784                 printk("%sDAC960: %s", DAC960_MessageLevelMap[MessageLevel],
5785                        Buffer);
5786             }
5787           else
5788             {
5789               if (BeginningOfLine)
5790                 {
5791                   if (Buffer[0] != '\n' || Length > 1)
5792                     printk("%sDAC960#%d: %s",
5793                            DAC960_MessageLevelMap[MessageLevel],
5794                            Controller->ControllerNumber, Buffer);
5795                 }
5796               else printk("%s", Buffer);
5797             }
5798         }
5799       else if (DAC960_CheckStatusBuffer(Controller, Length))
5800         {
5801           strcpy(&Controller->CurrentStatusBuffer[
5802                     Controller->CurrentStatusLength], Buffer);
5803           Controller->CurrentStatusLength += Length;
5804         }
5805     }
5806   else if (MessageLevel == DAC960_ProgressLevel)
5807     {
5808       strcpy(Controller->ProgressBuffer, Buffer);
5809       Controller->ProgressBufferLength = Length;
5810       if (Controller->EphemeralProgressMessage)
5811         {
5812           if (time_after_eq(jiffies, Controller->LastProgressReportTime
5813               + DAC960_ProgressReportingInterval))
5814             {
5815               printk("%sDAC960#%d: %s", DAC960_MessageLevelMap[MessageLevel],
5816                      Controller->ControllerNumber, Buffer);
5817               Controller->LastProgressReportTime = jiffies;
5818             }
5819         }
5820       else printk("%sDAC960#%d: %s", DAC960_MessageLevelMap[MessageLevel],
5821                   Controller->ControllerNumber, Buffer);
5822     }
5823   else if (MessageLevel == DAC960_UserCriticalLevel)
5824     {
5825       strcpy(&Controller->UserStatusBuffer[Controller->UserStatusLength],
5826              Buffer);
5827       Controller->UserStatusLength += Length;
5828       if (Buffer[0] != '\n' || Length > 1)
5829         printk("%sDAC960#%d: %s", DAC960_MessageLevelMap[MessageLevel],
5830                Controller->ControllerNumber, Buffer);
5831     }
5832   else
5833     {
5834       if (BeginningOfLine)
5835         printk("%sDAC960#%d: %s", DAC960_MessageLevelMap[MessageLevel],
5836                Controller->ControllerNumber, Buffer);
5837       else printk("%s", Buffer);
5838     }
5839   BeginningOfLine = (Buffer[Length-1] == '\n');
5840 }
5841
5842
5843 /*
5844   DAC960_ParsePhysicalDevice parses spaces followed by a Physical Device
5845   Channel:TargetID specification from a User Command string.  It updates
5846   Channel and TargetID and returns true on success and false on failure.
5847 */
5848
5849 static boolean DAC960_ParsePhysicalDevice(DAC960_Controller_T *Controller,
5850                                           char *UserCommandString,
5851                                           unsigned char *Channel,
5852                                           unsigned char *TargetID)
5853 {
5854   char *NewUserCommandString = UserCommandString;
5855   unsigned long XChannel, XTargetID;
5856   while (*UserCommandString == ' ') UserCommandString++;
5857   if (UserCommandString == NewUserCommandString)
5858     return false;
5859   XChannel = simple_strtoul(UserCommandString, &NewUserCommandString, 10);
5860   if (NewUserCommandString == UserCommandString ||
5861       *NewUserCommandString != ':' ||
5862       XChannel >= Controller->Channels)
5863     return false;
5864   UserCommandString = ++NewUserCommandString;
5865   XTargetID = simple_strtoul(UserCommandString, &NewUserCommandString, 10);
5866   if (NewUserCommandString == UserCommandString ||
5867       *NewUserCommandString != '\0' ||
5868       XTargetID >= Controller->Targets)
5869     return false;
5870   *Channel = XChannel;
5871   *TargetID = XTargetID;
5872   return true;
5873 }
5874
5875
5876 /*
5877   DAC960_ParseLogicalDrive parses spaces followed by a Logical Drive Number
5878   specification from a User Command string.  It updates LogicalDriveNumber and
5879   returns true on success and false on failure.
5880 */
5881
5882 static boolean DAC960_ParseLogicalDrive(DAC960_Controller_T *Controller,
5883                                         char *UserCommandString,
5884                                         unsigned char *LogicalDriveNumber)
5885 {
5886   char *NewUserCommandString = UserCommandString;
5887   unsigned long XLogicalDriveNumber;
5888   while (*UserCommandString == ' ') UserCommandString++;
5889   if (UserCommandString == NewUserCommandString)
5890     return false;
5891   XLogicalDriveNumber =
5892     simple_strtoul(UserCommandString, &NewUserCommandString, 10);
5893   if (NewUserCommandString == UserCommandString ||
5894       *NewUserCommandString != '\0' ||
5895       XLogicalDriveNumber > DAC960_MaxLogicalDrives - 1)
5896     return false;
5897   *LogicalDriveNumber = XLogicalDriveNumber;
5898   return true;
5899 }
5900
5901
5902 /*
5903   DAC960_V1_SetDeviceState sets the Device State for a Physical Device for
5904   DAC960 V1 Firmware Controllers.
5905 */
5906
5907 static void DAC960_V1_SetDeviceState(DAC960_Controller_T *Controller,
5908                                      DAC960_Command_T *Command,
5909                                      unsigned char Channel,
5910                                      unsigned char TargetID,
5911                                      DAC960_V1_PhysicalDeviceState_T
5912                                        DeviceState,
5913                                      const unsigned char *DeviceStateString)
5914 {
5915   DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
5916   CommandMailbox->Type3D.CommandOpcode = DAC960_V1_StartDevice;
5917   CommandMailbox->Type3D.Channel = Channel;
5918   CommandMailbox->Type3D.TargetID = TargetID;
5919   CommandMailbox->Type3D.DeviceState = DeviceState;
5920   CommandMailbox->Type3D.Modifier = 0;
5921   DAC960_ExecuteCommand(Command);
5922   switch (Command->V1.CommandStatus)
5923     {
5924     case DAC960_V1_NormalCompletion:
5925       DAC960_UserCritical("%s of Physical Device %d:%d Succeeded\n", Controller,
5926                           DeviceStateString, Channel, TargetID);
5927       break;
5928     case DAC960_V1_UnableToStartDevice:
5929       DAC960_UserCritical("%s of Physical Device %d:%d Failed - "
5930                           "Unable to Start Device\n", Controller,
5931                           DeviceStateString, Channel, TargetID);
5932       break;
5933     case DAC960_V1_NoDeviceAtAddress:
5934       DAC960_UserCritical("%s of Physical Device %d:%d Failed - "
5935                           "No Device at Address\n", Controller,
5936                           DeviceStateString, Channel, TargetID);
5937       break;
5938     case DAC960_V1_InvalidChannelOrTargetOrModifier:
5939       DAC960_UserCritical("%s of Physical Device %d:%d Failed - "
5940                           "Invalid Channel or Target or Modifier\n",
5941                           Controller, DeviceStateString, Channel, TargetID);
5942       break;
5943     case DAC960_V1_ChannelBusy:
5944       DAC960_UserCritical("%s of Physical Device %d:%d Failed - "
5945                           "Channel Busy\n", Controller,
5946                           DeviceStateString, Channel, TargetID);
5947       break;
5948     default:
5949       DAC960_UserCritical("%s of Physical Device %d:%d Failed - "
5950                           "Unexpected Status %04X\n", Controller,
5951                           DeviceStateString, Channel, TargetID,
5952                           Command->V1.CommandStatus);
5953       break;
5954     }
5955 }
5956
5957
5958 /*
5959   DAC960_V1_ExecuteUserCommand executes a User Command for DAC960 V1 Firmware
5960   Controllers.
5961 */
5962
5963 static boolean DAC960_V1_ExecuteUserCommand(DAC960_Controller_T *Controller,
5964                                             unsigned char *UserCommand)
5965 {
5966   DAC960_Command_T *Command;
5967   DAC960_V1_CommandMailbox_T *CommandMailbox;
5968   unsigned long flags;
5969   unsigned char Channel, TargetID, LogicalDriveNumber;
5970
5971   spin_lock_irqsave(&Controller->queue_lock, flags);
5972   while ((Command = DAC960_AllocateCommand(Controller)) == NULL)
5973     DAC960_WaitForCommand(Controller);
5974   spin_unlock_irqrestore(&Controller->queue_lock, flags);
5975   Controller->UserStatusLength = 0;
5976   DAC960_V1_ClearCommand(Command);
5977   Command->CommandType = DAC960_ImmediateCommand;
5978   CommandMailbox = &Command->V1.CommandMailbox;
5979   if (strcmp(UserCommand, "flush-cache") == 0)
5980     {
5981       CommandMailbox->Type3.CommandOpcode = DAC960_V1_Flush;
5982       DAC960_ExecuteCommand(Command);
5983       DAC960_UserCritical("Cache Flush Completed\n", Controller);
5984     }
5985   else if (strncmp(UserCommand, "kill", 4) == 0 &&
5986            DAC960_ParsePhysicalDevice(Controller, &UserCommand[4],
5987                                       &Channel, &TargetID))
5988     {
5989       DAC960_V1_DeviceState_T *DeviceState =
5990         &Controller->V1.DeviceState[Channel][TargetID];
5991       if (DeviceState->Present &&
5992           DeviceState->DeviceType == DAC960_V1_DiskType &&
5993           DeviceState->DeviceState != DAC960_V1_Device_Dead)
5994         DAC960_V1_SetDeviceState(Controller, Command, Channel, TargetID,
5995                                  DAC960_V1_Device_Dead, "Kill");
5996       else DAC960_UserCritical("Kill of Physical Device %d:%d Illegal\n",
5997                                Controller, Channel, TargetID);
5998     }
5999   else if (strncmp(UserCommand, "make-online", 11) == 0 &&
6000            DAC960_ParsePhysicalDevice(Controller, &UserCommand[11],
6001                                       &Channel, &TargetID))
6002     {
6003       DAC960_V1_DeviceState_T *DeviceState =
6004         &Controller->V1.DeviceState[Channel][TargetID];
6005       if (DeviceState->Present &&
6006           DeviceState->DeviceType == DAC960_V1_DiskType &&
6007           DeviceState->DeviceState == DAC960_V1_Device_Dead)
6008         DAC960_V1_SetDeviceState(Controller, Command, Channel, TargetID,
6009                                  DAC960_V1_Device_Online, "Make Online");
6010       else DAC960_UserCritical("Make Online of Physical Device %d:%d Illegal\n",
6011                                Controller, Channel, TargetID);
6012
6013     }
6014   else if (strncmp(UserCommand, "make-standby", 12) == 0 &&
6015            DAC960_ParsePhysicalDevice(Controller, &UserCommand[12],
6016                                       &Channel, &TargetID))
6017     {
6018       DAC960_V1_DeviceState_T *DeviceState =
6019         &Controller->V1.DeviceState[Channel][TargetID];
6020       if (DeviceState->Present &&
6021           DeviceState->DeviceType == DAC960_V1_DiskType &&
6022           DeviceState->DeviceState == DAC960_V1_Device_Dead)
6023         DAC960_V1_SetDeviceState(Controller, Command, Channel, TargetID,
6024                                  DAC960_V1_Device_Standby, "Make Standby");
6025       else DAC960_UserCritical("Make Standby of Physical "
6026                                "Device %d:%d Illegal\n",
6027                                Controller, Channel, TargetID);
6028     }
6029   else if (strncmp(UserCommand, "rebuild", 7) == 0 &&
6030            DAC960_ParsePhysicalDevice(Controller, &UserCommand[7],
6031                                       &Channel, &TargetID))
6032     {
6033       CommandMailbox->Type3D.CommandOpcode = DAC960_V1_RebuildAsync;
6034       CommandMailbox->Type3D.Channel = Channel;
6035       CommandMailbox->Type3D.TargetID = TargetID;
6036       DAC960_ExecuteCommand(Command);
6037       switch (Command->V1.CommandStatus)
6038         {
6039         case DAC960_V1_NormalCompletion:
6040           DAC960_UserCritical("Rebuild of Physical Device %d:%d Initiated\n",
6041                               Controller, Channel, TargetID);
6042           break;
6043         case DAC960_V1_AttemptToRebuildOnlineDrive:
6044           DAC960_UserCritical("Rebuild of Physical Device %d:%d Failed - "
6045                               "Attempt to Rebuild Online or "
6046                               "Unresponsive Drive\n",
6047                               Controller, Channel, TargetID);
6048           break;
6049         case DAC960_V1_NewDiskFailedDuringRebuild:
6050           DAC960_UserCritical("Rebuild of Physical Device %d:%d Failed - "
6051                               "New Disk Failed During Rebuild\n",
6052                               Controller, Channel, TargetID);
6053           break;
6054         case DAC960_V1_InvalidDeviceAddress:
6055           DAC960_UserCritical("Rebuild of Physical Device %d:%d Failed - "
6056                               "Invalid Device Address\n",
6057                               Controller, Channel, TargetID);
6058           break;
6059         case DAC960_V1_RebuildOrCheckAlreadyInProgress:
6060           DAC960_UserCritical("Rebuild of Physical Device %d:%d Failed - "
6061                               "Rebuild or Consistency Check Already "
6062                               "in Progress\n", Controller, Channel, TargetID);
6063           break;
6064         default:
6065           DAC960_UserCritical("Rebuild of Physical Device %d:%d Failed - "
6066                               "Unexpected Status %04X\n", Controller,
6067                               Channel, TargetID, Command->V1.CommandStatus);
6068           break;
6069         }
6070     }
6071   else if (strncmp(UserCommand, "check-consistency", 17) == 0 &&
6072            DAC960_ParseLogicalDrive(Controller, &UserCommand[17],
6073                                     &LogicalDriveNumber))
6074     {
6075       CommandMailbox->Type3C.CommandOpcode = DAC960_V1_CheckConsistencyAsync;
6076       CommandMailbox->Type3C.LogicalDriveNumber = LogicalDriveNumber;
6077       CommandMailbox->Type3C.AutoRestore = true;
6078       DAC960_ExecuteCommand(Command);
6079       switch (Command->V1.CommandStatus)
6080         {
6081         case DAC960_V1_NormalCompletion:
6082           DAC960_UserCritical("Consistency Check of Logical Drive %d "
6083                               "(/dev/rd/c%dd%d) Initiated\n",
6084                               Controller, LogicalDriveNumber,
6085                               Controller->ControllerNumber,
6086                               LogicalDriveNumber);
6087           break;
6088         case DAC960_V1_DependentDiskIsDead:
6089           DAC960_UserCritical("Consistency Check of Logical Drive %d "
6090                               "(/dev/rd/c%dd%d) Failed - "
6091                               "Dependent Physical Device is DEAD\n",
6092                               Controller, LogicalDriveNumber,
6093                               Controller->ControllerNumber,
6094                               LogicalDriveNumber);
6095           break;
6096         case DAC960_V1_InvalidOrNonredundantLogicalDrive:
6097           DAC960_UserCritical("Consistency Check of Logical Drive %d "
6098                               "(/dev/rd/c%dd%d) Failed - "
6099                               "Invalid or Nonredundant Logical Drive\n",
6100                               Controller, LogicalDriveNumber,
6101                               Controller->ControllerNumber,
6102                               LogicalDriveNumber);
6103           break;
6104         case DAC960_V1_RebuildOrCheckAlreadyInProgress:
6105           DAC960_UserCritical("Consistency Check of Logical Drive %d "
6106                               "(/dev/rd/c%dd%d) Failed - Rebuild or "
6107                               "Consistency Check Already in Progress\n",
6108                               Controller, LogicalDriveNumber,
6109                               Controller->ControllerNumber,
6110                               LogicalDriveNumber);
6111           break;
6112         default:
6113           DAC960_UserCritical("Consistency Check of Logical Drive %d "
6114                               "(/dev/rd/c%dd%d) Failed - "
6115                               "Unexpected Status %04X\n",
6116                               Controller, LogicalDriveNumber,
6117                               Controller->ControllerNumber,
6118                               LogicalDriveNumber, Command->V1.CommandStatus);
6119           break;
6120         }
6121     }
6122   else if (strcmp(UserCommand, "cancel-rebuild") == 0 ||
6123            strcmp(UserCommand, "cancel-consistency-check") == 0)
6124     {
6125       /*
6126         the OldRebuildRateConstant is never actually used
6127         once its value is retrieved from the controller.
6128        */
6129       unsigned char *OldRebuildRateConstant;
6130       dma_addr_t OldRebuildRateConstantDMA;
6131
6132       OldRebuildRateConstant = pci_alloc_consistent( Controller->PCIDevice,
6133                 sizeof(char), &OldRebuildRateConstantDMA);
6134       if (OldRebuildRateConstant == NULL) {
6135          DAC960_UserCritical("Cancellation of Rebuild or "
6136                              "Consistency Check Failed - "
6137                              "Out of Memory",
6138                              Controller);
6139          goto failure;
6140       }
6141       CommandMailbox->Type3R.CommandOpcode = DAC960_V1_RebuildControl;
6142       CommandMailbox->Type3R.RebuildRateConstant = 0xFF;
6143       CommandMailbox->Type3R.BusAddress = OldRebuildRateConstantDMA;
6144       DAC960_ExecuteCommand(Command);
6145       switch (Command->V1.CommandStatus)
6146         {
6147         case DAC960_V1_NormalCompletion:
6148           DAC960_UserCritical("Rebuild or Consistency Check Cancelled\n",
6149                               Controller);
6150           break;
6151         default:
6152           DAC960_UserCritical("Cancellation of Rebuild or "
6153                               "Consistency Check Failed - "
6154                               "Unexpected Status %04X\n",
6155                               Controller, Command->V1.CommandStatus);
6156           break;
6157         }
6158 failure:
6159         pci_free_consistent(Controller->PCIDevice, sizeof(char),
6160                 OldRebuildRateConstant, OldRebuildRateConstantDMA);
6161     }
6162   else DAC960_UserCritical("Illegal User Command: '%s'\n",
6163                            Controller, UserCommand);
6164
6165   spin_lock_irqsave(&Controller->queue_lock, flags);
6166   DAC960_DeallocateCommand(Command);
6167   spin_unlock_irqrestore(&Controller->queue_lock, flags);
6168   return true;
6169 }
6170
6171
6172 /*
6173   DAC960_V2_TranslatePhysicalDevice translates a Physical Device Channel and
6174   TargetID into a Logical Device.  It returns true on success and false
6175   on failure.
6176 */
6177
6178 static boolean DAC960_V2_TranslatePhysicalDevice(DAC960_Command_T *Command,
6179                                                  unsigned char Channel,
6180                                                  unsigned char TargetID,
6181                                                  unsigned short
6182                                                    *LogicalDeviceNumber)
6183 {
6184   DAC960_V2_CommandMailbox_T SavedCommandMailbox, *CommandMailbox;
6185   DAC960_Controller_T *Controller =  Command->Controller;
6186
6187   CommandMailbox = &Command->V2.CommandMailbox;
6188   memcpy(&SavedCommandMailbox, CommandMailbox,
6189          sizeof(DAC960_V2_CommandMailbox_T));
6190
6191   CommandMailbox->PhysicalDeviceInfo.CommandOpcode = DAC960_V2_IOCTL;
6192   CommandMailbox->PhysicalDeviceInfo.CommandControlBits
6193                                     .DataTransferControllerToHost = true;
6194   CommandMailbox->PhysicalDeviceInfo.CommandControlBits
6195                                     .NoAutoRequestSense = true;
6196   CommandMailbox->PhysicalDeviceInfo.DataTransferSize =
6197     sizeof(DAC960_V2_PhysicalToLogicalDevice_T);
6198   CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.TargetID = TargetID;
6199   CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.Channel = Channel;
6200   CommandMailbox->PhysicalDeviceInfo.IOCTL_Opcode =
6201     DAC960_V2_TranslatePhysicalToLogicalDevice;
6202   CommandMailbox->Common.DataTransferMemoryAddress
6203                         .ScatterGatherSegments[0]
6204                         .SegmentDataPointer =
6205                 Controller->V2.PhysicalToLogicalDeviceDMA;
6206   CommandMailbox->Common.DataTransferMemoryAddress
6207                         .ScatterGatherSegments[0]
6208                         .SegmentByteCount =
6209                 CommandMailbox->Common.DataTransferSize;
6210
6211   DAC960_ExecuteCommand(Command);
6212   *LogicalDeviceNumber = Controller->V2.PhysicalToLogicalDevice->LogicalDeviceNumber;
6213
6214   memcpy(CommandMailbox, &SavedCommandMailbox,
6215          sizeof(DAC960_V2_CommandMailbox_T));
6216   return (Command->V2.CommandStatus == DAC960_V2_NormalCompletion);
6217 }
6218
6219
6220 /*
6221   DAC960_V2_ExecuteUserCommand executes a User Command for DAC960 V2 Firmware
6222   Controllers.
6223 */
6224
6225 static boolean DAC960_V2_ExecuteUserCommand(DAC960_Controller_T *Controller,
6226                                             unsigned char *UserCommand)
6227 {
6228   DAC960_Command_T *Command;
6229   DAC960_V2_CommandMailbox_T *CommandMailbox;
6230   unsigned long flags;
6231   unsigned char Channel, TargetID, LogicalDriveNumber;
6232   unsigned short LogicalDeviceNumber;
6233
6234   spin_lock_irqsave(&Controller->queue_lock, flags);
6235   while ((Command = DAC960_AllocateCommand(Controller)) == NULL)
6236     DAC960_WaitForCommand(Controller);
6237   spin_unlock_irqrestore(&Controller->queue_lock, flags);
6238   Controller->UserStatusLength = 0;
6239   DAC960_V2_ClearCommand(Command);
6240   Command->CommandType = DAC960_ImmediateCommand;
6241   CommandMailbox = &Command->V2.CommandMailbox;
6242   CommandMailbox->Common.CommandOpcode = DAC960_V2_IOCTL;
6243   CommandMailbox->Common.CommandControlBits.DataTransferControllerToHost = true;
6244   CommandMailbox->Common.CommandControlBits.NoAutoRequestSense = true;
6245   if (strcmp(UserCommand, "flush-cache") == 0)
6246     {
6247       CommandMailbox->DeviceOperation.IOCTL_Opcode = DAC960_V2_PauseDevice;
6248       CommandMailbox->DeviceOperation.OperationDevice =
6249         DAC960_V2_RAID_Controller;
6250       DAC960_ExecuteCommand(Command);
6251       DAC960_UserCritical("Cache Flush Completed\n", Controller);
6252     }
6253   else if (strncmp(UserCommand, "kill", 4) == 0 &&
6254            DAC960_ParsePhysicalDevice(Controller, &UserCommand[4],
6255                                       &Channel, &TargetID) &&
6256            DAC960_V2_TranslatePhysicalDevice(Command, Channel, TargetID,
6257                                              &LogicalDeviceNumber))
6258     {
6259       CommandMailbox->SetDeviceState.LogicalDevice.LogicalDeviceNumber =
6260         LogicalDeviceNumber;
6261       CommandMailbox->SetDeviceState.IOCTL_Opcode =
6262         DAC960_V2_SetDeviceState;
6263       CommandMailbox->SetDeviceState.DeviceState.PhysicalDeviceState =
6264         DAC960_V2_Device_Dead;
6265       DAC960_ExecuteCommand(Command);
6266       DAC960_UserCritical("Kill of Physical Device %d:%d %s\n",
6267                           Controller, Channel, TargetID,
6268                           (Command->V2.CommandStatus
6269                            == DAC960_V2_NormalCompletion
6270                            ? "Succeeded" : "Failed"));
6271     }
6272   else if (strncmp(UserCommand, "make-online", 11) == 0 &&
6273            DAC960_ParsePhysicalDevice(Controller, &UserCommand[11],
6274                                       &Channel, &TargetID) &&
6275            DAC960_V2_TranslatePhysicalDevice(Command, Channel, TargetID,
6276                                              &LogicalDeviceNumber))
6277     {
6278       CommandMailbox->SetDeviceState.LogicalDevice.LogicalDeviceNumber =
6279         LogicalDeviceNumber;
6280       CommandMailbox->SetDeviceState.IOCTL_Opcode =
6281         DAC960_V2_SetDeviceState;
6282       CommandMailbox->SetDeviceState.DeviceState.PhysicalDeviceState =
6283         DAC960_V2_Device_Online;
6284       DAC960_ExecuteCommand(Command);
6285       DAC960_UserCritical("Make Online of Physical Device %d:%d %s\n",
6286                           Controller, Channel, TargetID,
6287                           (Command->V2.CommandStatus
6288                            == DAC960_V2_NormalCompletion
6289                            ? "Succeeded" : "Failed"));
6290     }
6291   else if (strncmp(UserCommand, "make-standby", 12) == 0 &&
6292            DAC960_ParsePhysicalDevice(Controller, &UserCommand[12],
6293                                       &Channel, &TargetID) &&
6294            DAC960_V2_TranslatePhysicalDevice(Command, Channel, TargetID,
6295                                              &LogicalDeviceNumber))
6296     {
6297       CommandMailbox->SetDeviceState.LogicalDevice.LogicalDeviceNumber =
6298         LogicalDeviceNumber;
6299       CommandMailbox->SetDeviceState.IOCTL_Opcode =
6300         DAC960_V2_SetDeviceState;
6301       CommandMailbox->SetDeviceState.DeviceState.PhysicalDeviceState =
6302         DAC960_V2_Device_Standby;
6303       DAC960_ExecuteCommand(Command);
6304       DAC960_UserCritical("Make Standby of Physical Device %d:%d %s\n",
6305                           Controller, Channel, TargetID,
6306                           (Command->V2.CommandStatus
6307                            == DAC960_V2_NormalCompletion
6308                            ? "Succeeded" : "Failed"));
6309     }
6310   else if (strncmp(UserCommand, "rebuild", 7) == 0 &&
6311            DAC960_ParsePhysicalDevice(Controller, &UserCommand[7],
6312                                       &Channel, &TargetID) &&
6313            DAC960_V2_TranslatePhysicalDevice(Command, Channel, TargetID,
6314                                              &LogicalDeviceNumber))
6315     {
6316       CommandMailbox->LogicalDeviceInfo.LogicalDevice.LogicalDeviceNumber =
6317         LogicalDeviceNumber;
6318       CommandMailbox->LogicalDeviceInfo.IOCTL_Opcode =
6319         DAC960_V2_RebuildDeviceStart;
6320       DAC960_ExecuteCommand(Command);
6321       DAC960_UserCritical("Rebuild of Physical Device %d:%d %s\n",
6322                           Controller, Channel, TargetID,
6323                           (Command->V2.CommandStatus
6324                            == DAC960_V2_NormalCompletion
6325                            ? "Initiated" : "Not Initiated"));
6326     }
6327   else if (strncmp(UserCommand, "cancel-rebuild", 14) == 0 &&
6328            DAC960_ParsePhysicalDevice(Controller, &UserCommand[14],
6329                                       &Channel, &TargetID) &&
6330            DAC960_V2_TranslatePhysicalDevice(Command, Channel, TargetID,
6331                                              &LogicalDeviceNumber))
6332     {
6333       CommandMailbox->LogicalDeviceInfo.LogicalDevice.LogicalDeviceNumber =
6334         LogicalDeviceNumber;
6335       CommandMailbox->LogicalDeviceInfo.IOCTL_Opcode =
6336         DAC960_V2_RebuildDeviceStop;
6337       DAC960_ExecuteCommand(Command);
6338       DAC960_UserCritical("Rebuild of Physical Device %d:%d %s\n",
6339                           Controller, Channel, TargetID,
6340                           (Command->V2.CommandStatus
6341                            == DAC960_V2_NormalCompletion
6342                            ? "Cancelled" : "Not Cancelled"));
6343     }
6344   else if (strncmp(UserCommand, "check-consistency", 17) == 0 &&
6345            DAC960_ParseLogicalDrive(Controller, &UserCommand[17],
6346                                     &LogicalDriveNumber))
6347     {
6348       CommandMailbox->ConsistencyCheck.LogicalDevice.LogicalDeviceNumber =
6349         LogicalDriveNumber;
6350       CommandMailbox->ConsistencyCheck.IOCTL_Opcode =
6351         DAC960_V2_ConsistencyCheckStart;
6352       CommandMailbox->ConsistencyCheck.RestoreConsistency = true;
6353       CommandMailbox->ConsistencyCheck.InitializedAreaOnly = false;
6354       DAC960_ExecuteCommand(Command);
6355       DAC960_UserCritical("Consistency Check of Logical Drive %d "
6356                           "(/dev/rd/c%dd%d) %s\n",
6357                           Controller, LogicalDriveNumber,
6358                           Controller->ControllerNumber,
6359                           LogicalDriveNumber,
6360                           (Command->V2.CommandStatus
6361                            == DAC960_V2_NormalCompletion
6362                            ? "Initiated" : "Not Initiated"));
6363     }
6364   else if (strncmp(UserCommand, "cancel-consistency-check", 24) == 0 &&
6365            DAC960_ParseLogicalDrive(Controller, &UserCommand[24],
6366                                     &LogicalDriveNumber))
6367     {
6368       CommandMailbox->ConsistencyCheck.LogicalDevice.LogicalDeviceNumber =
6369         LogicalDriveNumber;
6370       CommandMailbox->ConsistencyCheck.IOCTL_Opcode =
6371         DAC960_V2_ConsistencyCheckStop;
6372       DAC960_ExecuteCommand(Command);
6373       DAC960_UserCritical("Consistency Check of Logical Drive %d "
6374                           "(/dev/rd/c%dd%d) %s\n",
6375                           Controller, LogicalDriveNumber,
6376                           Controller->ControllerNumber,
6377                           LogicalDriveNumber,
6378                           (Command->V2.CommandStatus
6379                            == DAC960_V2_NormalCompletion
6380                            ? "Cancelled" : "Not Cancelled"));
6381     }
6382   else if (strcmp(UserCommand, "perform-discovery") == 0)
6383     {
6384       CommandMailbox->Common.IOCTL_Opcode = DAC960_V2_StartDiscovery;
6385       DAC960_ExecuteCommand(Command);
6386       DAC960_UserCritical("Discovery %s\n", Controller,
6387                           (Command->V2.CommandStatus
6388                            == DAC960_V2_NormalCompletion
6389                            ? "Initiated" : "Not Initiated"));
6390       if (Command->V2.CommandStatus == DAC960_V2_NormalCompletion)
6391         {
6392           CommandMailbox->ControllerInfo.CommandOpcode = DAC960_V2_IOCTL;
6393           CommandMailbox->ControllerInfo.CommandControlBits
6394                                         .DataTransferControllerToHost = true;
6395           CommandMailbox->ControllerInfo.CommandControlBits
6396                                         .NoAutoRequestSense = true;
6397           CommandMailbox->ControllerInfo.DataTransferSize =
6398             sizeof(DAC960_V2_ControllerInfo_T);
6399           CommandMailbox->ControllerInfo.ControllerNumber = 0;
6400           CommandMailbox->ControllerInfo.IOCTL_Opcode =
6401             DAC960_V2_GetControllerInfo;
6402           /*
6403            * How does this NOT race with the queued Monitoring
6404            * usage of this structure?
6405            */
6406           CommandMailbox->ControllerInfo.DataTransferMemoryAddress
6407                                         .ScatterGatherSegments[0]
6408                                         .SegmentDataPointer =
6409             Controller->V2.NewControllerInformationDMA;
6410           CommandMailbox->ControllerInfo.DataTransferMemoryAddress
6411                                         .ScatterGatherSegments[0]
6412                                         .SegmentByteCount =
6413             CommandMailbox->ControllerInfo.DataTransferSize;
6414           DAC960_ExecuteCommand(Command);
6415           while (Controller->V2.NewControllerInformation->PhysicalScanActive)
6416             {
6417               DAC960_ExecuteCommand(Command);
6418               sleep_on_timeout(&Controller->CommandWaitQueue, HZ);
6419             }
6420           DAC960_UserCritical("Discovery Completed\n", Controller);
6421         }
6422     }
6423   else if (strcmp(UserCommand, "suppress-enclosure-messages") == 0)
6424     Controller->SuppressEnclosureMessages = true;
6425   else DAC960_UserCritical("Illegal User Command: '%s'\n",
6426                            Controller, UserCommand);
6427
6428   spin_lock_irqsave(&Controller->queue_lock, flags);
6429   DAC960_DeallocateCommand(Command);
6430   spin_unlock_irqrestore(&Controller->queue_lock, flags);
6431   return true;
6432 }
6433
6434
6435 /*
6436   DAC960_ProcReadStatus implements reading /proc/rd/status.
6437 */
6438
6439 static int DAC960_ProcReadStatus(char *Page, char **Start, off_t Offset,
6440                                  int Count, int *EOF, void *Data)
6441 {
6442   unsigned char *StatusMessage = "OK\n";
6443   int ControllerNumber, BytesAvailable;
6444   for (ControllerNumber = 0;
6445        ControllerNumber < DAC960_ControllerCount;
6446        ControllerNumber++)
6447     {
6448       DAC960_Controller_T *Controller = DAC960_Controllers[ControllerNumber];
6449       if (Controller == NULL) continue;
6450       if (Controller->MonitoringAlertMode)
6451         {
6452           StatusMessage = "ALERT\n";
6453           break;
6454         }
6455     }
6456   BytesAvailable = strlen(StatusMessage) - Offset;
6457   if (Count >= BytesAvailable)
6458     {
6459       Count = BytesAvailable;
6460       *EOF = true;
6461     }
6462   if (Count <= 0) return 0;
6463   *Start = Page;
6464   memcpy(Page, &StatusMessage[Offset], Count);
6465   return Count;
6466 }
6467
6468
6469 /*
6470   DAC960_ProcReadInitialStatus implements reading /proc/rd/cN/initial_status.
6471 */
6472
6473 static int DAC960_ProcReadInitialStatus(char *Page, char **Start, off_t Offset,
6474                                         int Count, int *EOF, void *Data)
6475 {
6476   DAC960_Controller_T *Controller = (DAC960_Controller_T *) Data;
6477   int BytesAvailable = Controller->InitialStatusLength - Offset;
6478   if (Count >= BytesAvailable)
6479     {
6480       Count = BytesAvailable;
6481       *EOF = true;
6482     }
6483   if (Count <= 0) return 0;
6484   *Start = Page;
6485   memcpy(Page, &Controller->CombinedStatusBuffer[Offset], Count);
6486   return Count;
6487 }
6488
6489
6490 /*
6491   DAC960_ProcReadCurrentStatus implements reading /proc/rd/cN/current_status.
6492 */
6493
6494 static int DAC960_ProcReadCurrentStatus(char *Page, char **Start, off_t Offset,
6495                                         int Count, int *EOF, void *Data)
6496 {
6497   DAC960_Controller_T *Controller = (DAC960_Controller_T *) Data;
6498   unsigned char *StatusMessage =
6499     "No Rebuild or Consistency Check in Progress\n";
6500   int ProgressMessageLength = strlen(StatusMessage);
6501   int BytesAvailable;
6502   if (jiffies != Controller->LastCurrentStatusTime)
6503     {
6504       Controller->CurrentStatusLength = 0;
6505       DAC960_AnnounceDriver(Controller);
6506       DAC960_ReportControllerConfiguration(Controller);
6507       DAC960_ReportDeviceConfiguration(Controller);
6508       if (Controller->ProgressBufferLength > 0)
6509         ProgressMessageLength = Controller->ProgressBufferLength;
6510       if (DAC960_CheckStatusBuffer(Controller, 2 + ProgressMessageLength))
6511         {
6512           unsigned char *CurrentStatusBuffer = Controller->CurrentStatusBuffer;
6513           CurrentStatusBuffer[Controller->CurrentStatusLength++] = ' ';
6514           CurrentStatusBuffer[Controller->CurrentStatusLength++] = ' ';
6515           if (Controller->ProgressBufferLength > 0)
6516             strcpy(&CurrentStatusBuffer[Controller->CurrentStatusLength],
6517                    Controller->ProgressBuffer);
6518           else
6519             strcpy(&CurrentStatusBuffer[Controller->CurrentStatusLength],
6520                    StatusMessage);
6521           Controller->CurrentStatusLength += ProgressMessageLength;
6522         }
6523       Controller->LastCurrentStatusTime = jiffies;
6524     }
6525   BytesAvailable = Controller->CurrentStatusLength - Offset;
6526   if (Count >= BytesAvailable)
6527     {
6528       Count = BytesAvailable;
6529       *EOF = true;
6530     }
6531   if (Count <= 0) return 0;
6532   *Start = Page;
6533   memcpy(Page, &Controller->CurrentStatusBuffer[Offset], Count);
6534   return Count;
6535 }
6536
6537
6538 /*
6539   DAC960_ProcReadUserCommand implements reading /proc/rd/cN/user_command.
6540 */
6541
6542 static int DAC960_ProcReadUserCommand(char *Page, char **Start, off_t Offset,
6543                                       int Count, int *EOF, void *Data)
6544 {
6545   DAC960_Controller_T *Controller = (DAC960_Controller_T *) Data;
6546   int BytesAvailable = Controller->UserStatusLength - Offset;
6547   if (Count >= BytesAvailable)
6548     {
6549       Count = BytesAvailable;
6550       *EOF = true;
6551     }
6552   if (Count <= 0) return 0;
6553   *Start = Page;
6554   memcpy(Page, &Controller->UserStatusBuffer[Offset], Count);
6555   return Count;
6556 }
6557
6558
6559 /*
6560   DAC960_ProcWriteUserCommand implements writing /proc/rd/cN/user_command.
6561 */
6562
6563 static int DAC960_ProcWriteUserCommand(struct file *file,
6564                                        const char __user *Buffer,
6565                                        unsigned long Count, void *Data)
6566 {
6567   DAC960_Controller_T *Controller = (DAC960_Controller_T *) Data;
6568   unsigned char CommandBuffer[80];
6569   int Length;
6570   if (Count > sizeof(CommandBuffer)-1) return -EINVAL;
6571   if (copy_from_user(CommandBuffer, Buffer, Count)) return -EFAULT;
6572   CommandBuffer[Count] = '\0';
6573   Length = strlen(CommandBuffer);
6574   if (CommandBuffer[Length-1] == '\n')
6575     CommandBuffer[--Length] = '\0';
6576   if (Controller->FirmwareType == DAC960_V1_Controller)
6577     return (DAC960_V1_ExecuteUserCommand(Controller, CommandBuffer)
6578             ? Count : -EBUSY);
6579   else
6580     return (DAC960_V2_ExecuteUserCommand(Controller, CommandBuffer)
6581             ? Count : -EBUSY);
6582 }
6583
6584
6585 /*
6586   DAC960_CreateProcEntries creates the /proc/rd/... entries for the
6587   DAC960 Driver.
6588 */
6589
6590 static void DAC960_CreateProcEntries(DAC960_Controller_T *Controller)
6591 {
6592         struct proc_dir_entry *StatusProcEntry;
6593         struct proc_dir_entry *ControllerProcEntry;
6594         struct proc_dir_entry *UserCommandProcEntry;
6595
6596         if (DAC960_ProcDirectoryEntry == NULL) {
6597                 DAC960_ProcDirectoryEntry = proc_mkdir("rd", NULL);
6598                 StatusProcEntry = create_proc_read_entry("status", 0,
6599                                            DAC960_ProcDirectoryEntry,
6600                                            DAC960_ProcReadStatus, NULL);
6601         }
6602
6603       sprintf(Controller->ControllerName, "c%d", Controller->ControllerNumber);
6604       ControllerProcEntry = proc_mkdir(Controller->ControllerName,
6605                                        DAC960_ProcDirectoryEntry);
6606       create_proc_read_entry("initial_status", 0, ControllerProcEntry,
6607                              DAC960_ProcReadInitialStatus, Controller);
6608       create_proc_read_entry("current_status", 0, ControllerProcEntry,
6609                              DAC960_ProcReadCurrentStatus, Controller);
6610       UserCommandProcEntry =
6611         create_proc_read_entry("user_command", S_IWUSR | S_IRUSR,
6612                                ControllerProcEntry, DAC960_ProcReadUserCommand,
6613                                Controller);
6614       UserCommandProcEntry->write_proc = DAC960_ProcWriteUserCommand;
6615       Controller->ControllerProcEntry = ControllerProcEntry;
6616 }
6617
6618
6619 /*
6620   DAC960_DestroyProcEntries destroys the /proc/rd/... entries for the
6621   DAC960 Driver.
6622 */
6623
6624 static void DAC960_DestroyProcEntries(DAC960_Controller_T *Controller)
6625 {
6626       if (Controller->ControllerProcEntry == NULL)
6627               return;
6628       remove_proc_entry("initial_status", Controller->ControllerProcEntry);
6629       remove_proc_entry("current_status", Controller->ControllerProcEntry);
6630       remove_proc_entry("user_command", Controller->ControllerProcEntry);
6631       remove_proc_entry(Controller->ControllerName, DAC960_ProcDirectoryEntry);
6632       Controller->ControllerProcEntry = NULL;
6633 }
6634
6635 #ifdef DAC960_GAM_MINOR
6636
6637 /*
6638  * DAC960_gam_ioctl is the ioctl function for performing RAID operations.
6639 */
6640
6641 static int DAC960_gam_ioctl(struct inode *inode, struct file *file,
6642                             unsigned int Request, unsigned long Argument)
6643 {
6644   int ErrorCode = 0;
6645   if (!capable(CAP_SYS_ADMIN)) return -EACCES;
6646   switch (Request)
6647     {
6648     case DAC960_IOCTL_GET_CONTROLLER_COUNT:
6649       return DAC960_ControllerCount;
6650     case DAC960_IOCTL_GET_CONTROLLER_INFO:
6651       {
6652         DAC960_ControllerInfo_T __user *UserSpaceControllerInfo =
6653           (DAC960_ControllerInfo_T __user *) Argument;
6654         DAC960_ControllerInfo_T ControllerInfo;
6655         DAC960_Controller_T *Controller;
6656         int ControllerNumber;
6657         if (UserSpaceControllerInfo == NULL) return -EINVAL;
6658         ErrorCode = get_user(ControllerNumber,
6659                              &UserSpaceControllerInfo->ControllerNumber);
6660         if (ErrorCode != 0) return ErrorCode;
6661         if (ControllerNumber < 0 ||
6662             ControllerNumber > DAC960_ControllerCount - 1)
6663           return -ENXIO;
6664         Controller = DAC960_Controllers[ControllerNumber];
6665         if (Controller == NULL) return -ENXIO;
6666         memset(&ControllerInfo, 0, sizeof(DAC960_ControllerInfo_T));
6667         ControllerInfo.ControllerNumber = ControllerNumber;
6668         ControllerInfo.FirmwareType = Controller->FirmwareType;
6669         ControllerInfo.Channels = Controller->Channels;
6670         ControllerInfo.Targets = Controller->Targets;
6671         ControllerInfo.PCI_Bus = Controller->Bus;
6672         ControllerInfo.PCI_Device = Controller->Device;
6673         ControllerInfo.PCI_Function = Controller->Function;
6674         ControllerInfo.IRQ_Channel = Controller->IRQ_Channel;
6675         ControllerInfo.PCI_Address = Controller->PCI_Address;
6676         strcpy(ControllerInfo.ModelName, Controller->ModelName);
6677         strcpy(ControllerInfo.FirmwareVersion, Controller->FirmwareVersion);
6678         return (copy_to_user(UserSpaceControllerInfo, &ControllerInfo,
6679                              sizeof(DAC960_ControllerInfo_T)) ? -EFAULT : 0);
6680       }
6681     case DAC960_IOCTL_V1_EXECUTE_COMMAND:
6682       {
6683         DAC960_V1_UserCommand_T __user *UserSpaceUserCommand =
6684           (DAC960_V1_UserCommand_T __user *) Argument;
6685         DAC960_V1_UserCommand_T UserCommand;
6686         DAC960_Controller_T *Controller;
6687         DAC960_Command_T *Command = NULL;
6688         DAC960_V1_CommandOpcode_T CommandOpcode;
6689         DAC960_V1_CommandStatus_T CommandStatus;
6690         DAC960_V1_DCDB_T DCDB;
6691         DAC960_V1_DCDB_T *DCDB_IOBUF = NULL;
6692         dma_addr_t      DCDB_IOBUFDMA;
6693         unsigned long flags;
6694         int ControllerNumber, DataTransferLength;
6695         unsigned char *DataTransferBuffer = NULL;
6696         dma_addr_t DataTransferBufferDMA;
6697         if (UserSpaceUserCommand == NULL) return -EINVAL;
6698         if (copy_from_user(&UserCommand, UserSpaceUserCommand,
6699                                    sizeof(DAC960_V1_UserCommand_T))) {
6700                 ErrorCode = -EFAULT;
6701                 goto Failure1a;
6702         }
6703         ControllerNumber = UserCommand.ControllerNumber;
6704         if (ControllerNumber < 0 ||
6705             ControllerNumber > DAC960_ControllerCount - 1)
6706           return -ENXIO;
6707         Controller = DAC960_Controllers[ControllerNumber];
6708         if (Controller == NULL) return -ENXIO;
6709         if (Controller->FirmwareType != DAC960_V1_Controller) return -EINVAL;
6710         CommandOpcode = UserCommand.CommandMailbox.Common.CommandOpcode;
6711         DataTransferLength = UserCommand.DataTransferLength;
6712         if (CommandOpcode & 0x80) return -EINVAL;
6713         if (CommandOpcode == DAC960_V1_DCDB)
6714           {
6715             if (copy_from_user(&DCDB, UserCommand.DCDB,
6716                                sizeof(DAC960_V1_DCDB_T))) {
6717                 ErrorCode = -EFAULT;
6718                 goto Failure1a;
6719             }
6720             if (DCDB.Channel >= DAC960_V1_MaxChannels) return -EINVAL;
6721             if (!((DataTransferLength == 0 &&
6722                    DCDB.Direction
6723                    == DAC960_V1_DCDB_NoDataTransfer) ||
6724                   (DataTransferLength > 0 &&
6725                    DCDB.Direction
6726                    == DAC960_V1_DCDB_DataTransferDeviceToSystem) ||
6727                   (DataTransferLength < 0 &&
6728                    DCDB.Direction
6729                    == DAC960_V1_DCDB_DataTransferSystemToDevice)))
6730               return -EINVAL;
6731             if (((DCDB.TransferLengthHigh4 << 16) | DCDB.TransferLength)
6732                 != abs(DataTransferLength))
6733               return -EINVAL;
6734             DCDB_IOBUF = pci_alloc_consistent(Controller->PCIDevice,
6735                         sizeof(DAC960_V1_DCDB_T), &DCDB_IOBUFDMA);
6736             if (DCDB_IOBUF == NULL)
6737                         return -ENOMEM;
6738           }
6739         if (DataTransferLength > 0)
6740           {
6741             DataTransferBuffer = pci_alloc_consistent(Controller->PCIDevice,
6742                                 DataTransferLength, &DataTransferBufferDMA);
6743             if (DataTransferBuffer == NULL) {
6744                 ErrorCode = -ENOMEM;
6745                 goto Failure1;
6746             }
6747             memset(DataTransferBuffer, 0, DataTransferLength);
6748           }
6749         else if (DataTransferLength < 0)
6750           {
6751             DataTransferBuffer = pci_alloc_consistent(Controller->PCIDevice,
6752                                 -DataTransferLength, &DataTransferBufferDMA);
6753             if (DataTransferBuffer == NULL) {
6754                 ErrorCode = -ENOMEM;
6755                 goto Failure1;
6756             }
6757             if (copy_from_user(DataTransferBuffer,
6758                                UserCommand.DataTransferBuffer,
6759                                -DataTransferLength)) {
6760                 ErrorCode = -EFAULT;
6761                 goto Failure1;
6762             }
6763           }
6764         if (CommandOpcode == DAC960_V1_DCDB)
6765           {
6766             spin_lock_irqsave(&Controller->queue_lock, flags);
6767             while ((Command = DAC960_AllocateCommand(Controller)) == NULL)
6768               DAC960_WaitForCommand(Controller);
6769             while (Controller->V1.DirectCommandActive[DCDB.Channel]
6770                                                      [DCDB.TargetID])
6771               {
6772                 spin_unlock_irq(&Controller->queue_lock);
6773                 __wait_event(Controller->CommandWaitQueue,
6774                              !Controller->V1.DirectCommandActive
6775                                              [DCDB.Channel][DCDB.TargetID]);
6776                 spin_lock_irq(&Controller->queue_lock);
6777               }
6778             Controller->V1.DirectCommandActive[DCDB.Channel]
6779                                               [DCDB.TargetID] = true;
6780             spin_unlock_irqrestore(&Controller->queue_lock, flags);
6781             DAC960_V1_ClearCommand(Command);
6782             Command->CommandType = DAC960_ImmediateCommand;
6783             memcpy(&Command->V1.CommandMailbox, &UserCommand.CommandMailbox,
6784                    sizeof(DAC960_V1_CommandMailbox_T));
6785             Command->V1.CommandMailbox.Type3.BusAddress = DCDB_IOBUFDMA;
6786             DCDB.BusAddress = DataTransferBufferDMA;
6787             memcpy(DCDB_IOBUF, &DCDB, sizeof(DAC960_V1_DCDB_T));
6788           }
6789         else
6790           {
6791             spin_lock_irqsave(&Controller->queue_lock, flags);
6792             while ((Command = DAC960_AllocateCommand(Controller)) == NULL)
6793               DAC960_WaitForCommand(Controller);
6794             spin_unlock_irqrestore(&Controller->queue_lock, flags);
6795             DAC960_V1_ClearCommand(Command);
6796             Command->CommandType = DAC960_ImmediateCommand;
6797             memcpy(&Command->V1.CommandMailbox, &UserCommand.CommandMailbox,
6798                    sizeof(DAC960_V1_CommandMailbox_T));
6799             if (DataTransferBuffer != NULL)
6800               Command->V1.CommandMailbox.Type3.BusAddress =
6801                 DataTransferBufferDMA;
6802           }
6803         DAC960_ExecuteCommand(Command);
6804         CommandStatus = Command->V1.CommandStatus;
6805         spin_lock_irqsave(&Controller->queue_lock, flags);
6806         DAC960_DeallocateCommand(Command);
6807         spin_unlock_irqrestore(&Controller->queue_lock, flags);
6808         if (DataTransferLength > 0)
6809           {
6810             if (copy_to_user(UserCommand.DataTransferBuffer,
6811                              DataTransferBuffer, DataTransferLength)) {
6812                 ErrorCode = -EFAULT;
6813                 goto Failure1;
6814             }
6815           }
6816         if (CommandOpcode == DAC960_V1_DCDB)
6817           {
6818             /*
6819               I don't believe Target or Channel in the DCDB_IOBUF
6820               should be any different from the contents of DCDB.
6821              */
6822             Controller->V1.DirectCommandActive[DCDB.Channel]
6823                                               [DCDB.TargetID] = false;
6824             if (copy_to_user(UserCommand.DCDB, DCDB_IOBUF,
6825                              sizeof(DAC960_V1_DCDB_T))) {
6826                 ErrorCode = -EFAULT;
6827                 goto Failure1;
6828             }
6829           }
6830         ErrorCode = CommandStatus;
6831       Failure1:
6832         if (DataTransferBuffer != NULL)
6833           pci_free_consistent(Controller->PCIDevice, abs(DataTransferLength),
6834                         DataTransferBuffer, DataTransferBufferDMA);
6835         if (DCDB_IOBUF != NULL)
6836           pci_free_consistent(Controller->PCIDevice, sizeof(DAC960_V1_DCDB_T),
6837                         DCDB_IOBUF, DCDB_IOBUFDMA);
6838       Failure1a:
6839         return ErrorCode;
6840       }
6841     case DAC960_IOCTL_V2_EXECUTE_COMMAND:
6842       {
6843         DAC960_V2_UserCommand_T __user *UserSpaceUserCommand =
6844           (DAC960_V2_UserCommand_T __user *) Argument;
6845         DAC960_V2_UserCommand_T UserCommand;
6846         DAC960_Controller_T *Controller;
6847         DAC960_Command_T *Command = NULL;
6848         DAC960_V2_CommandMailbox_T *CommandMailbox;
6849         DAC960_V2_CommandStatus_T CommandStatus;
6850         unsigned long flags;
6851         int ControllerNumber, DataTransferLength;
6852         int DataTransferResidue, RequestSenseLength;
6853         unsigned char *DataTransferBuffer = NULL;
6854         dma_addr_t DataTransferBufferDMA;
6855         unsigned char *RequestSenseBuffer = NULL;
6856         dma_addr_t RequestSenseBufferDMA;
6857         if (UserSpaceUserCommand == NULL) return -EINVAL;
6858         if (copy_from_user(&UserCommand, UserSpaceUserCommand,
6859                            sizeof(DAC960_V2_UserCommand_T))) {
6860                 ErrorCode = -EFAULT;
6861                 goto Failure2a;
6862         }
6863         ControllerNumber = UserCommand.ControllerNumber;
6864         if (ControllerNumber < 0 ||
6865             ControllerNumber > DAC960_ControllerCount - 1)
6866           return -ENXIO;
6867         Controller = DAC960_Controllers[ControllerNumber];
6868         if (Controller == NULL) return -ENXIO;
6869         if (Controller->FirmwareType != DAC960_V2_Controller) return -EINVAL;
6870         DataTransferLength = UserCommand.DataTransferLength;
6871         if (DataTransferLength > 0)
6872           {
6873             DataTransferBuffer = pci_alloc_consistent(Controller->PCIDevice,
6874                                 DataTransferLength, &DataTransferBufferDMA);
6875             if (DataTransferBuffer == NULL) return -ENOMEM;
6876             memset(DataTransferBuffer, 0, DataTransferLength);
6877           }
6878         else if (DataTransferLength < 0)
6879           {
6880             DataTransferBuffer = pci_alloc_consistent(Controller->PCIDevice,
6881                                 -DataTransferLength, &DataTransferBufferDMA);
6882             if (DataTransferBuffer == NULL) return -ENOMEM;
6883             if (copy_from_user(DataTransferBuffer,
6884                                UserCommand.DataTransferBuffer,
6885                                -DataTransferLength)) {
6886                 ErrorCode = -EFAULT;
6887                 goto Failure2;
6888             }
6889           }
6890         RequestSenseLength = UserCommand.RequestSenseLength;
6891         if (RequestSenseLength > 0)
6892           {
6893             RequestSenseBuffer = pci_alloc_consistent(Controller->PCIDevice,
6894                         RequestSenseLength, &RequestSenseBufferDMA);
6895             if (RequestSenseBuffer == NULL)
6896               {
6897                 ErrorCode = -ENOMEM;
6898                 goto Failure2;
6899               }
6900             memset(RequestSenseBuffer, 0, RequestSenseLength);
6901           }
6902         spin_lock_irqsave(&Controller->queue_lock, flags);
6903         while ((Command = DAC960_AllocateCommand(Controller)) == NULL)
6904           DAC960_WaitForCommand(Controller);
6905         spin_unlock_irqrestore(&Controller->queue_lock, flags);
6906         DAC960_V2_ClearCommand(Command);
6907         Command->CommandType = DAC960_ImmediateCommand;
6908         CommandMailbox = &Command->V2.CommandMailbox;
6909         memcpy(CommandMailbox, &UserCommand.CommandMailbox,
6910                sizeof(DAC960_V2_CommandMailbox_T));
6911         CommandMailbox->Common.CommandControlBits
6912                               .AdditionalScatterGatherListMemory = false;
6913         CommandMailbox->Common.CommandControlBits
6914                               .NoAutoRequestSense = true;
6915         CommandMailbox->Common.DataTransferSize = 0;
6916         CommandMailbox->Common.DataTransferPageNumber = 0;
6917         memset(&CommandMailbox->Common.DataTransferMemoryAddress, 0,
6918                sizeof(DAC960_V2_DataTransferMemoryAddress_T));
6919         if (DataTransferLength != 0)
6920           {
6921             if (DataTransferLength > 0)
6922               {
6923                 CommandMailbox->Common.CommandControlBits
6924                                       .DataTransferControllerToHost = true;
6925                 CommandMailbox->Common.DataTransferSize = DataTransferLength;
6926               }
6927             else
6928               {
6929                 CommandMailbox->Common.CommandControlBits
6930                                       .DataTransferControllerToHost = false;
6931                 CommandMailbox->Common.DataTransferSize = -DataTransferLength;
6932               }
6933             CommandMailbox->Common.DataTransferMemoryAddress
6934                                   .ScatterGatherSegments[0]
6935                                   .SegmentDataPointer = DataTransferBufferDMA;
6936             CommandMailbox->Common.DataTransferMemoryAddress
6937                                   .ScatterGatherSegments[0]
6938                                   .SegmentByteCount =
6939               CommandMailbox->Common.DataTransferSize;
6940           }
6941         if (RequestSenseLength > 0)
6942           {
6943             CommandMailbox->Common.CommandControlBits
6944                                   .NoAutoRequestSense = false;
6945             CommandMailbox->Common.RequestSenseSize = RequestSenseLength;
6946             CommandMailbox->Common.RequestSenseBusAddress =
6947                                                         RequestSenseBufferDMA;
6948           }
6949         DAC960_ExecuteCommand(Command);
6950         CommandStatus = Command->V2.CommandStatus;
6951         RequestSenseLength = Command->V2.RequestSenseLength;
6952         DataTransferResidue = Command->V2.DataTransferResidue;
6953         spin_lock_irqsave(&Controller->queue_lock, flags);
6954         DAC960_DeallocateCommand(Command);
6955         spin_unlock_irqrestore(&Controller->queue_lock, flags);
6956         if (RequestSenseLength > UserCommand.RequestSenseLength)
6957           RequestSenseLength = UserCommand.RequestSenseLength;
6958         if (copy_to_user(&UserSpaceUserCommand->DataTransferLength,
6959                                  &DataTransferResidue,
6960                                  sizeof(DataTransferResidue))) {
6961                 ErrorCode = -EFAULT;
6962                 goto Failure2;
6963         }
6964         if (copy_to_user(&UserSpaceUserCommand->RequestSenseLength,
6965                          &RequestSenseLength, sizeof(RequestSenseLength))) {
6966                 ErrorCode = -EFAULT;
6967                 goto Failure2;
6968         }
6969         if (DataTransferLength > 0)
6970           {
6971             if (copy_to_user(UserCommand.DataTransferBuffer,
6972                              DataTransferBuffer, DataTransferLength)) {
6973                 ErrorCode = -EFAULT;
6974                 goto Failure2;
6975             }
6976           }
6977         if (RequestSenseLength > 0)
6978           {
6979             if (copy_to_user(UserCommand.RequestSenseBuffer,
6980                              RequestSenseBuffer, RequestSenseLength)) {
6981                 ErrorCode = -EFAULT;
6982                 goto Failure2;
6983             }
6984           }
6985         ErrorCode = CommandStatus;
6986       Failure2:
6987           pci_free_consistent(Controller->PCIDevice, abs(DataTransferLength),
6988                 DataTransferBuffer, DataTransferBufferDMA);
6989         if (RequestSenseBuffer != NULL)
6990           pci_free_consistent(Controller->PCIDevice, RequestSenseLength,
6991                 RequestSenseBuffer, RequestSenseBufferDMA);
6992       Failure2a:
6993         return ErrorCode;
6994       }
6995     case DAC960_IOCTL_V2_GET_HEALTH_STATUS:
6996       {
6997         DAC960_V2_GetHealthStatus_T __user *UserSpaceGetHealthStatus =
6998           (DAC960_V2_GetHealthStatus_T __user *) Argument;
6999         DAC960_V2_GetHealthStatus_T GetHealthStatus;
7000         DAC960_V2_HealthStatusBuffer_T HealthStatusBuffer;
7001         DAC960_Controller_T *Controller;
7002         int ControllerNumber;
7003         if (UserSpaceGetHealthStatus == NULL) return -EINVAL;
7004         if (copy_from_user(&GetHealthStatus, UserSpaceGetHealthStatus,
7005                            sizeof(DAC960_V2_GetHealthStatus_T)))
7006                 return -EFAULT;
7007         ControllerNumber = GetHealthStatus.ControllerNumber;
7008         if (ControllerNumber < 0 ||
7009             ControllerNumber > DAC960_ControllerCount - 1)
7010           return -ENXIO;
7011         Controller = DAC960_Controllers[ControllerNumber];
7012         if (Controller == NULL) return -ENXIO;
7013         if (Controller->FirmwareType != DAC960_V2_Controller) return -EINVAL;
7014         if (copy_from_user(&HealthStatusBuffer,
7015                            GetHealthStatus.HealthStatusBuffer,
7016                            sizeof(DAC960_V2_HealthStatusBuffer_T)))
7017                 return -EFAULT;
7018         while (Controller->V2.HealthStatusBuffer->StatusChangeCounter
7019                == HealthStatusBuffer.StatusChangeCounter &&
7020                Controller->V2.HealthStatusBuffer->NextEventSequenceNumber
7021                == HealthStatusBuffer.NextEventSequenceNumber)
7022           {
7023             interruptible_sleep_on_timeout(&Controller->HealthStatusWaitQueue,
7024                                            DAC960_MonitoringTimerInterval);
7025             if (signal_pending(current)) return -EINTR;
7026           }
7027         if (copy_to_user(GetHealthStatus.HealthStatusBuffer,
7028                          Controller->V2.HealthStatusBuffer,
7029                          sizeof(DAC960_V2_HealthStatusBuffer_T)))
7030                 return -EFAULT;
7031         return 0;
7032       }
7033     }
7034   return -EINVAL;
7035 }
7036
7037 static struct file_operations DAC960_gam_fops = {
7038         .owner          = THIS_MODULE,
7039         .ioctl          = DAC960_gam_ioctl
7040 };
7041
7042 static struct miscdevice DAC960_gam_dev = {
7043         DAC960_GAM_MINOR,
7044         "dac960_gam",
7045         &DAC960_gam_fops
7046 };
7047
7048 static int DAC960_gam_init(void)
7049 {
7050         int ret;
7051
7052         ret = misc_register(&DAC960_gam_dev);
7053         if (ret)
7054                 printk(KERN_ERR "DAC960_gam: can't misc_register on minor %d\n", DAC960_GAM_MINOR);
7055         return ret;
7056 }
7057
7058 static void DAC960_gam_cleanup(void)
7059 {
7060         misc_deregister(&DAC960_gam_dev);
7061 }
7062
7063 #endif /* DAC960_GAM_MINOR */
7064
7065 static struct DAC960_privdata DAC960_GEM_privdata = {
7066         .HardwareType =         DAC960_GEM_Controller,
7067         .FirmwareType   =       DAC960_V2_Controller,
7068         .InterruptHandler =     DAC960_GEM_InterruptHandler,
7069         .MemoryWindowSize =     DAC960_GEM_RegisterWindowSize,
7070 };
7071
7072
7073 static struct DAC960_privdata DAC960_BA_privdata = {
7074         .HardwareType =         DAC960_BA_Controller,
7075         .FirmwareType   =       DAC960_V2_Controller,
7076         .InterruptHandler =     DAC960_BA_InterruptHandler,
7077         .MemoryWindowSize =     DAC960_BA_RegisterWindowSize,
7078 };
7079
7080 static struct DAC960_privdata DAC960_LP_privdata = {
7081         .HardwareType =         DAC960_LP_Controller,
7082         .FirmwareType   =       DAC960_LP_Controller,
7083         .InterruptHandler =     DAC960_LP_InterruptHandler,
7084         .MemoryWindowSize =     DAC960_LP_RegisterWindowSize,
7085 };
7086
7087 static struct DAC960_privdata DAC960_LA_privdata = {
7088         .HardwareType =         DAC960_LA_Controller,
7089         .FirmwareType   =       DAC960_V1_Controller,
7090         .InterruptHandler =     DAC960_LA_InterruptHandler,
7091         .MemoryWindowSize =     DAC960_LA_RegisterWindowSize,
7092 };
7093
7094 static struct DAC960_privdata DAC960_PG_privdata = {
7095         .HardwareType =         DAC960_PG_Controller,
7096         .FirmwareType   =       DAC960_V1_Controller,
7097         .InterruptHandler =     DAC960_PG_InterruptHandler,
7098         .MemoryWindowSize =     DAC960_PG_RegisterWindowSize,
7099 };
7100
7101 static struct DAC960_privdata DAC960_PD_privdata = {
7102         .HardwareType =         DAC960_PD_Controller,
7103         .FirmwareType   =       DAC960_V1_Controller,
7104         .InterruptHandler =     DAC960_PD_InterruptHandler,
7105         .MemoryWindowSize =     DAC960_PD_RegisterWindowSize,
7106 };
7107
7108 static struct DAC960_privdata DAC960_P_privdata = {
7109         .HardwareType =         DAC960_P_Controller,
7110         .FirmwareType   =       DAC960_V1_Controller,
7111         .InterruptHandler =     DAC960_P_InterruptHandler,
7112         .MemoryWindowSize =     DAC960_PD_RegisterWindowSize,
7113 };
7114
7115 static struct pci_device_id DAC960_id_table[] = {
7116         {
7117                 .vendor         = PCI_VENDOR_ID_MYLEX,
7118                 .device         = PCI_DEVICE_ID_MYLEX_DAC960_GEM,
7119                 .subvendor      = PCI_ANY_ID,
7120                 .subdevice      = PCI_ANY_ID,
7121                 .driver_data    = (unsigned long) &DAC960_GEM_privdata,
7122         },
7123         {
7124                 .vendor         = PCI_VENDOR_ID_MYLEX,
7125                 .device         = PCI_DEVICE_ID_MYLEX_DAC960_BA,
7126                 .subvendor      = PCI_ANY_ID,
7127                 .subdevice      = PCI_ANY_ID,
7128                 .driver_data    = (unsigned long) &DAC960_BA_privdata,
7129         },
7130         {
7131                 .vendor         = PCI_VENDOR_ID_MYLEX,
7132                 .device         = PCI_DEVICE_ID_MYLEX_DAC960_LP,
7133                 .subvendor      = PCI_ANY_ID,
7134                 .subdevice      = PCI_ANY_ID,
7135                 .driver_data    = (unsigned long) &DAC960_LP_privdata,
7136         },
7137         {
7138                 .vendor         = PCI_VENDOR_ID_DEC,
7139                 .device         = PCI_DEVICE_ID_DEC_21285,
7140                 .subvendor      = PCI_VENDOR_ID_MYLEX,
7141                 .subdevice      = PCI_DEVICE_ID_MYLEX_DAC960_LA,
7142                 .driver_data    = (unsigned long) &DAC960_LA_privdata,
7143         },
7144         {
7145                 .vendor         = PCI_VENDOR_ID_MYLEX,
7146                 .device         = PCI_DEVICE_ID_MYLEX_DAC960_PG,
7147                 .subvendor      = PCI_ANY_ID,
7148                 .subdevice      = PCI_ANY_ID,
7149                 .driver_data    = (unsigned long) &DAC960_PG_privdata,
7150         },
7151         {
7152                 .vendor         = PCI_VENDOR_ID_MYLEX,
7153                 .device         = PCI_DEVICE_ID_MYLEX_DAC960_PD,
7154                 .subvendor      = PCI_ANY_ID,
7155                 .subdevice      = PCI_ANY_ID,
7156                 .driver_data    = (unsigned long) &DAC960_PD_privdata,
7157         },
7158         {
7159                 .vendor         = PCI_VENDOR_ID_MYLEX,
7160                 .device         = PCI_DEVICE_ID_MYLEX_DAC960_P,
7161                 .subvendor      = PCI_ANY_ID,
7162                 .subdevice      = PCI_ANY_ID,
7163                 .driver_data    = (unsigned long) &DAC960_P_privdata,
7164         },
7165         {0, },
7166 };
7167
7168 MODULE_DEVICE_TABLE(pci, DAC960_id_table);
7169
7170 static struct pci_driver DAC960_pci_driver = {
7171         .name           = "DAC960",
7172         .id_table       = DAC960_id_table,
7173         .probe          = DAC960_Probe,
7174         .remove         = DAC960_Remove,
7175 };
7176
7177 static int DAC960_init_module(void)
7178 {
7179         int ret;
7180
7181         ret =  pci_register_driver(&DAC960_pci_driver);
7182 #ifdef DAC960_GAM_MINOR
7183         if (!ret)
7184                 DAC960_gam_init();
7185 #endif
7186         return ret;
7187 }
7188
7189 static void DAC960_cleanup_module(void)
7190 {
7191         int i;
7192
7193 #ifdef DAC960_GAM_MINOR
7194         DAC960_gam_cleanup();
7195 #endif
7196
7197         for (i = 0; i < DAC960_ControllerCount; i++) {
7198                 DAC960_Controller_T *Controller = DAC960_Controllers[i];
7199                 if (Controller == NULL)
7200                         continue;
7201                 DAC960_FinalizeController(Controller);
7202         }
7203         if (DAC960_ProcDirectoryEntry != NULL) {
7204                 remove_proc_entry("rd/status", NULL);
7205                 remove_proc_entry("rd", NULL);
7206         }
7207         DAC960_ControllerCount = 0;
7208         pci_unregister_driver(&DAC960_pci_driver);
7209 }
7210
7211 module_init(DAC960_init_module);
7212 module_exit(DAC960_cleanup_module);
7213
7214 MODULE_LICENSE("GPL");